?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
Linux-2.6.12-rc2
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / char / synclinkmp.c
blobec949e4c070fd10dfdf9246bbc15712213549a28
1 /*
2 * $Id: synclinkmp.c,v 4.34 2005/03/04 15:07:10 paulkf Exp $
3 *
4 * Device driver for Microgate SyncLink Multiport
5 * high speed multiprotocol serial adapter.
6 *
7 * written by Paul Fulghum for Microgate Corporation
8 * paulkf@microgate.com
9 *
10 * Microgate and SyncLink are trademarks of Microgate Corporation
11 *
12 * Derived from serial.c written by Theodore Ts'o and Linus Torvalds
13 * This code is released under the GNU General Public License (GPL)
14 *
15 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
16 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
17 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
18 * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
19 * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
20 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
21 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
22 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
23 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
24 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
25 * OF THE POSSIBILITY OF SUCH DAMAGE.
26 */
27
28 #define VERSION(ver,rel,seq) (((ver)<<16) | ((rel)<<8) | (seq))
29 #if defined(__i386__)
30 # define BREAKPOINT() asm(" int $3");
31 #else
32 # define BREAKPOINT() { }
33 #endif
34
35 #define MAX_DEVICES 12
36
37 #include <linux/config.h>
38 #include <linux/module.h>
39 #include <linux/errno.h>
40 #include <linux/signal.h>
41 #include <linux/sched.h>
42 #include <linux/timer.h>
43 #include <linux/interrupt.h>
44 #include <linux/pci.h>
45 #include <linux/tty.h>
46 #include <linux/tty_flip.h>
47 #include <linux/serial.h>
48 #include <linux/major.h>
49 #include <linux/string.h>
50 #include <linux/fcntl.h>
51 #include <linux/ptrace.h>
52 #include <linux/ioport.h>
53 #include <linux/mm.h>
54 #include <linux/slab.h>
55 #include <linux/netdevice.h>
56 #include <linux/vmalloc.h>
57 #include <linux/init.h>
58 #include <asm/serial.h>
59 #include <linux/delay.h>
60 #include <linux/ioctl.h>
61
62 #include <asm/system.h>
63 #include <asm/io.h>
64 #include <asm/irq.h>
65 #include <asm/dma.h>
66 #include <linux/bitops.h>
67 #include <asm/types.h>
68 #include <linux/termios.h>
69 #include <linux/workqueue.h>
70 #include <linux/hdlc.h>
71
72 #ifdef CONFIG_HDLC_MODULE
73 #define CONFIG_HDLC 1
74 #endif
75
76 #define GET_USER(error,value,addr) error = get_user(value,addr)
77 #define COPY_FROM_USER(error,dest,src,size) error = copy_from_user(dest,src,size) ? -EFAULT : 0
78 #define PUT_USER(error,value,addr) error = put_user(value,addr)
79 #define COPY_TO_USER(error,dest,src,size) error = copy_to_user(dest,src,size) ? -EFAULT : 0
80
81 #include <asm/uaccess.h>
82
83 #include "linux/synclink.h"
84
85 static MGSL_PARAMS default_params = {
86 MGSL_MODE_HDLC, /* unsigned long mode */
87 0, /* unsigned char loopback; */
88 HDLC_FLAG_UNDERRUN_ABORT15, /* unsigned short flags; */
89 HDLC_ENCODING_NRZI_SPACE, /* unsigned char encoding; */
90 0, /* unsigned long clock_speed; */
91 0xff, /* unsigned char addr_filter; */
92 HDLC_CRC_16_CCITT, /* unsigned short crc_type; */
93 HDLC_PREAMBLE_LENGTH_8BITS, /* unsigned char preamble_length; */
94 HDLC_PREAMBLE_PATTERN_NONE, /* unsigned char preamble; */
95 9600, /* unsigned long data_rate; */
96 8, /* unsigned char data_bits; */
97 1, /* unsigned char stop_bits; */
98 ASYNC_PARITY_NONE /* unsigned char parity; */
99 };
100
101 /* size in bytes of DMA data buffers */
102 #define SCABUFSIZE 1024
103 #define SCA_MEM_SIZE 0x40000
104 #define SCA_BASE_SIZE 512
105 #define SCA_REG_SIZE 16
106 #define SCA_MAX_PORTS 4
107 #define SCAMAXDESC 128
108
109 #define BUFFERLISTSIZE 4096
110
111 /* SCA-I style DMA buffer descriptor */
112 typedef struct _SCADESC
113 {
114 u16 next; /* lower l6 bits of next descriptor addr */
115 u16 buf_ptr; /* lower 16 bits of buffer addr */
116 u8 buf_base; /* upper 8 bits of buffer addr */
117 u8 pad1;
118 u16 length; /* length of buffer */
119 u8 status; /* status of buffer */
120 u8 pad2;
121 } SCADESC, *PSCADESC;
122
123 typedef struct _SCADESC_EX
124 {
125 /* device driver bookkeeping section */
126 char *virt_addr; /* virtual address of data buffer */
127 u16 phys_entry; /* lower 16-bits of physical address of this descriptor */
128 } SCADESC_EX, *PSCADESC_EX;
129
130 /* The queue of BH actions to be performed */
131
132 #define BH_RECEIVE 1
133 #define BH_TRANSMIT 2
134 #define BH_STATUS 4
135
136 #define IO_PIN_SHUTDOWN_LIMIT 100
137
138 #define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))
139
140 struct _input_signal_events {
141 int ri_up;
142 int ri_down;
143 int dsr_up;
144 int dsr_down;
145 int dcd_up;
146 int dcd_down;
147 int cts_up;
148 int cts_down;
149 };
150
151 /*
152 * Device instance data structure
153 */
154 typedef struct _synclinkmp_info {
155 void *if_ptr; /* General purpose pointer (used by SPPP) */
156 int magic;
157 int flags;
158 int count; /* count of opens */
159 int line;
160 unsigned short close_delay;
161 unsigned short closing_wait; /* time to wait before closing */
162
163 struct mgsl_icount icount;
164
165 struct tty_struct *tty;
166 int timeout;
167 int x_char; /* xon/xoff character */
168 int blocked_open; /* # of blocked opens */
169 u16 read_status_mask1; /* break detection (SR1 indications) */
170 u16 read_status_mask2; /* parity/framing/overun (SR2 indications) */
171 unsigned char ignore_status_mask1; /* break detection (SR1 indications) */
172 unsigned char ignore_status_mask2; /* parity/framing/overun (SR2 indications) */
173 unsigned char *tx_buf;
174 int tx_put;
175 int tx_get;
176 int tx_count;
177
178 wait_queue_head_t open_wait;
179 wait_queue_head_t close_wait;
180
181 wait_queue_head_t status_event_wait_q;
182 wait_queue_head_t event_wait_q;
183 struct timer_list tx_timer; /* HDLC transmit timeout timer */
184 struct _synclinkmp_info *next_device; /* device list link */
185 struct timer_list status_timer; /* input signal status check timer */
186
187 spinlock_t lock; /* spinlock for synchronizing with ISR */
188 struct work_struct task; /* task structure for scheduling bh */
189
190 u32 max_frame_size; /* as set by device config */
191
192 u32 pending_bh;
193
194 int bh_running; /* Protection from multiple */
195 int isr_overflow;
196 int bh_requested;
197
198 int dcd_chkcount; /* check counts to prevent */
199 int cts_chkcount; /* too many IRQs if a signal */
200 int dsr_chkcount; /* is floating */
201 int ri_chkcount;
202
203 char *buffer_list; /* virtual address of Rx & Tx buffer lists */
204 unsigned long buffer_list_phys;
205
206 unsigned int rx_buf_count; /* count of total allocated Rx buffers */
207 SCADESC *rx_buf_list; /* list of receive buffer entries */
208 SCADESC_EX rx_buf_list_ex[SCAMAXDESC]; /* list of receive buffer entries */
209 unsigned int current_rx_buf;
210
211 unsigned int tx_buf_count; /* count of total allocated Tx buffers */
212 SCADESC *tx_buf_list; /* list of transmit buffer entries */
213 SCADESC_EX tx_buf_list_ex[SCAMAXDESC]; /* list of transmit buffer entries */
214 unsigned int last_tx_buf;
215
216 unsigned char *tmp_rx_buf;
217 unsigned int tmp_rx_buf_count;
218
219 int rx_enabled;
220 int rx_overflow;
221
222 int tx_enabled;
223 int tx_active;
224 u32 idle_mode;
225
226 unsigned char ie0_value;
227 unsigned char ie1_value;
228 unsigned char ie2_value;
229 unsigned char ctrlreg_value;
230 unsigned char old_signals;
231
232 char device_name[25]; /* device instance name */
233
234 int port_count;
235 int adapter_num;
236 int port_num;
237
238 struct _synclinkmp_info *port_array[SCA_MAX_PORTS];
239
240 unsigned int bus_type; /* expansion bus type (ISA,EISA,PCI) */
241
242 unsigned int irq_level; /* interrupt level */
243 unsigned long irq_flags;
244 int irq_requested; /* nonzero if IRQ requested */
245
246 MGSL_PARAMS params; /* communications parameters */
247
248 unsigned char serial_signals; /* current serial signal states */
249
250 int irq_occurred; /* for diagnostics use */
251 unsigned int init_error; /* Initialization startup error */
252
253 u32 last_mem_alloc;
254 unsigned char* memory_base; /* shared memory address (PCI only) */
255 u32 phys_memory_base;
256 int shared_mem_requested;
257
258 unsigned char* sca_base; /* HD64570 SCA Memory address */
259 u32 phys_sca_base;
260 u32 sca_offset;
261 int sca_base_requested;
262
263 unsigned char* lcr_base; /* local config registers (PCI only) */
264 u32 phys_lcr_base;
265 u32 lcr_offset;
266 int lcr_mem_requested;
267
268 unsigned char* statctrl_base; /* status/control register memory */
269 u32 phys_statctrl_base;
270 u32 statctrl_offset;
271 int sca_statctrl_requested;
272
273 u32 misc_ctrl_value;
274 char flag_buf[MAX_ASYNC_BUFFER_SIZE];
275 char char_buf[MAX_ASYNC_BUFFER_SIZE];
276 BOOLEAN drop_rts_on_tx_done;
277
278 struct _input_signal_events input_signal_events;
279
280 /* SPPP/Cisco HDLC device parts */
281 int netcount;
282 int dosyncppp;
283 spinlock_t netlock;
284
285 #ifdef CONFIG_HDLC
286 struct net_device *netdev;
287 #endif
288
289 } SLMP_INFO;
290
291 #define MGSL_MAGIC 0x5401
292
293 /*
294 * define serial signal status change macros
295 */
296 #define MISCSTATUS_DCD_LATCHED (SerialSignal_DCD<<8) /* indicates change in DCD */
297 #define MISCSTATUS_RI_LATCHED (SerialSignal_RI<<8) /* indicates change in RI */
298 #define MISCSTATUS_CTS_LATCHED (SerialSignal_CTS<<8) /* indicates change in CTS */
299 #define MISCSTATUS_DSR_LATCHED (SerialSignal_DSR<<8) /* change in DSR */
300
301 /* Common Register macros */
302 #define LPR 0x00
303 #define PABR0 0x02
304 #define PABR1 0x03
305 #define WCRL 0x04
306 #define WCRM 0x05
307 #define WCRH 0x06
308 #define DPCR 0x08
309 #define DMER 0x09
310 #define ISR0 0x10
311 #define ISR1 0x11
312 #define ISR2 0x12
313 #define IER0 0x14
314 #define IER1 0x15
315 #define IER2 0x16
316 #define ITCR 0x18
317 #define INTVR 0x1a
318 #define IMVR 0x1c
319
320 /* MSCI Register macros */
321 #define TRB 0x20
322 #define TRBL 0x20
323 #define TRBH 0x21
324 #define SR0 0x22
325 #define SR1 0x23
326 #define SR2 0x24
327 #define SR3 0x25
328 #define FST 0x26
329 #define IE0 0x28
330 #define IE1 0x29
331 #define IE2 0x2a
332 #define FIE 0x2b
333 #define CMD 0x2c
334 #define MD0 0x2e
335 #define MD1 0x2f
336 #define MD2 0x30
337 #define CTL 0x31
338 #define SA0 0x32
339 #define SA1 0x33
340 #define IDL 0x34
341 #define TMC 0x35
342 #define RXS 0x36
343 #define TXS 0x37
344 #define TRC0 0x38
345 #define TRC1 0x39
346 #define RRC 0x3a
347 #define CST0 0x3c
348 #define CST1 0x3d
349
350 /* Timer Register Macros */
351 #define TCNT 0x60
352 #define TCNTL 0x60
353 #define TCNTH 0x61
354 #define TCONR 0x62
355 #define TCONRL 0x62
356 #define TCONRH 0x63
357 #define TMCS 0x64
358 #define TEPR 0x65
359
360 /* DMA Controller Register macros */
361 #define DARL 0x80
362 #define DARH 0x81
363 #define DARB 0x82
364 #define BAR 0x80
365 #define BARL 0x80
366 #define BARH 0x81
367 #define BARB 0x82
368 #define SAR 0x84
369 #define SARL 0x84
370 #define SARH 0x85
371 #define SARB 0x86
372 #define CPB 0x86
373 #define CDA 0x88
374 #define CDAL 0x88
375 #define CDAH 0x89
376 #define EDA 0x8a
377 #define EDAL 0x8a
378 #define EDAH 0x8b
379 #define BFL 0x8c
380 #define BFLL 0x8c
381 #define BFLH 0x8d
382 #define BCR 0x8e
383 #define BCRL 0x8e
384 #define BCRH 0x8f
385 #define DSR 0x90
386 #define DMR 0x91
387 #define FCT 0x93
388 #define DIR 0x94
389 #define DCMD 0x95
390
391 /* combine with timer or DMA register address */
392 #define TIMER0 0x00
393 #define TIMER1 0x08
394 #define TIMER2 0x10
395 #define TIMER3 0x18
396 #define RXDMA 0x00
397 #define TXDMA 0x20
398
399 /* SCA Command Codes */
400 #define NOOP 0x00
401 #define TXRESET 0x01
402 #define TXENABLE 0x02
403 #define TXDISABLE 0x03
404 #define TXCRCINIT 0x04
405 #define TXCRCEXCL 0x05
406 #define TXEOM 0x06
407 #define TXABORT 0x07
408 #define MPON 0x08
409 #define TXBUFCLR 0x09
410 #define RXRESET 0x11
411 #define RXENABLE 0x12
412 #define RXDISABLE 0x13
413 #define RXCRCINIT 0x14
414 #define RXREJECT 0x15
415 #define SEARCHMP 0x16
416 #define RXCRCEXCL 0x17
417 #define RXCRCCALC 0x18
418 #define CHRESET 0x21
419 #define HUNT 0x31
420
421 /* DMA command codes */
422 #define SWABORT 0x01
423 #define FEICLEAR 0x02
424
425 /* IE0 */
426 #define TXINTE BIT7
427 #define RXINTE BIT6
428 #define TXRDYE BIT1
429 #define RXRDYE BIT0
430
431 /* IE1 & SR1 */
432 #define UDRN BIT7
433 #define IDLE BIT6
434 #define SYNCD BIT4
435 #define FLGD BIT4
436 #define CCTS BIT3
437 #define CDCD BIT2
438 #define BRKD BIT1
439 #define ABTD BIT1
440 #define GAPD BIT1
441 #define BRKE BIT0
442 #define IDLD BIT0
443
444 /* IE2 & SR2 */
445 #define EOM BIT7
446 #define PMP BIT6
447 #define SHRT BIT6
448 #define PE BIT5
449 #define ABT BIT5
450 #define FRME BIT4
451 #define RBIT BIT4
452 #define OVRN BIT3
453 #define CRCE BIT2
454
455
456 /*
457 * Global linked list of SyncLink devices
458 */
459 static SLMP_INFO *synclinkmp_device_list = NULL;
460 static int synclinkmp_adapter_count = -1;
461 static int synclinkmp_device_count = 0;
462
463 /*
464 * Set this param to non-zero to load eax with the
465 * .text section address and breakpoint on module load.
466 * This is useful for use with gdb and add-symbol-file command.
467 */
468 static int break_on_load=0;
469
470 /*
471 * Driver major number, defaults to zero to get auto
472 * assigned major number. May be forced as module parameter.
473 */
474 static int ttymajor=0;
475
476 /*
477 * Array of user specified options for ISA adapters.
478 */
479 static int debug_level = 0;
480 static int maxframe[MAX_DEVICES] = {0,};
481 static int dosyncppp[MAX_DEVICES] = {0,};
482
483 module_param(break_on_load, bool, 0);
484 module_param(ttymajor, int, 0);
485 module_param(debug_level, int, 0);
486 module_param_array(maxframe, int, NULL, 0);
487 module_param_array(dosyncppp, int, NULL, 0);
488
489 static char *driver_name = "SyncLink MultiPort driver";
490 static char *driver_version = "$Revision: 4.34 $";
491
492 static int synclinkmp_init_one(struct pci_dev *dev,const struct pci_device_id *ent);
493 static void synclinkmp_remove_one(struct pci_dev *dev);
494
495 static struct pci_device_id synclinkmp_pci_tbl[] = {
496 { PCI_VENDOR_ID_MICROGATE, PCI_DEVICE_ID_MICROGATE_SCA, PCI_ANY_ID, PCI_ANY_ID, },
497 { 0, }, /* terminate list */
498 };
499 MODULE_DEVICE_TABLE(pci, synclinkmp_pci_tbl);
500
501 MODULE_LICENSE("GPL");
502
503 static struct pci_driver synclinkmp_pci_driver = {
504 .name = "synclinkmp",
505 .id_table = synclinkmp_pci_tbl,
506 .probe = synclinkmp_init_one,
507 .remove = __devexit_p(synclinkmp_remove_one),
508 };
509
510
511 static struct tty_driver *serial_driver;
512
513 /* number of characters left in xmit buffer before we ask for more */
514 #define WAKEUP_CHARS 256
515
516
517 /* tty callbacks */
518
519 static int open(struct tty_struct *tty, struct file * filp);
520 static void close(struct tty_struct *tty, struct file * filp);
521 static void hangup(struct tty_struct *tty);
522 static void set_termios(struct tty_struct *tty, struct termios *old_termios);
523
524 static int write(struct tty_struct *tty, const unsigned char *buf, int count);
525 static void put_char(struct tty_struct *tty, unsigned char ch);
526 static void send_xchar(struct tty_struct *tty, char ch);
527 static void wait_until_sent(struct tty_struct *tty, int timeout);
528 static int write_room(struct tty_struct *tty);
529 static void flush_chars(struct tty_struct *tty);
530 static void flush_buffer(struct tty_struct *tty);
531 static void tx_hold(struct tty_struct *tty);
532 static void tx_release(struct tty_struct *tty);
533
534 static int ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg);
535 static int read_proc(char *page, char **start, off_t off, int count,int *eof, void *data);
536 static int chars_in_buffer(struct tty_struct *tty);
537 static void throttle(struct tty_struct * tty);
538 static void unthrottle(struct tty_struct * tty);
539 static void set_break(struct tty_struct *tty, int break_state);
540
541 #ifdef CONFIG_HDLC
542 #define dev_to_port(D) (dev_to_hdlc(D)->priv)
543 static void hdlcdev_tx_done(SLMP_INFO *info);
544 static void hdlcdev_rx(SLMP_INFO *info, char *buf, int size);
545 static int hdlcdev_init(SLMP_INFO *info);
546 static void hdlcdev_exit(SLMP_INFO *info);
547 #endif
548
549 /* ioctl handlers */
550
551 static int get_stats(SLMP_INFO *info, struct mgsl_icount __user *user_icount);
552 static int get_params(SLMP_INFO *info, MGSL_PARAMS __user *params);
553 static int set_params(SLMP_INFO *info, MGSL_PARAMS __user *params);
554 static int get_txidle(SLMP_INFO *info, int __user *idle_mode);
555 static int set_txidle(SLMP_INFO *info, int idle_mode);
556 static int tx_enable(SLMP_INFO *info, int enable);
557 static int tx_abort(SLMP_INFO *info);
558 static int rx_enable(SLMP_INFO *info, int enable);
559 static int map_status(int signals);
560 static int modem_input_wait(SLMP_INFO *info,int arg);
561 static int wait_mgsl_event(SLMP_INFO *info, int __user *mask_ptr);
562 static int tiocmget(struct tty_struct *tty, struct file *file);
563 static int tiocmset(struct tty_struct *tty, struct file *file,
564 unsigned int set, unsigned int clear);
565 static void set_break(struct tty_struct *tty, int break_state);
566
567 static void add_device(SLMP_INFO *info);
568 static void device_init(int adapter_num, struct pci_dev *pdev);
569 static int claim_resources(SLMP_INFO *info);
570 static void release_resources(SLMP_INFO *info);
571
572 static int startup(SLMP_INFO *info);
573 static int block_til_ready(struct tty_struct *tty, struct file * filp,SLMP_INFO *info);
574 static void shutdown(SLMP_INFO *info);
575 static void program_hw(SLMP_INFO *info);
576 static void change_params(SLMP_INFO *info);
577
578 static int init_adapter(SLMP_INFO *info);
579 static int register_test(SLMP_INFO *info);
580 static int irq_test(SLMP_INFO *info);
581 static int loopback_test(SLMP_INFO *info);
582 static int adapter_test(SLMP_INFO *info);
583 static int memory_test(SLMP_INFO *info);
584
585 static void reset_adapter(SLMP_INFO *info);
586 static void reset_port(SLMP_INFO *info);
587 static void async_mode(SLMP_INFO *info);
588 static void hdlc_mode(SLMP_INFO *info);
589
590 static void rx_stop(SLMP_INFO *info);
591 static void rx_start(SLMP_INFO *info);
592 static void rx_reset_buffers(SLMP_INFO *info);
593 static void rx_free_frame_buffers(SLMP_INFO *info, unsigned int first, unsigned int last);
594 static int rx_get_frame(SLMP_INFO *info);
595
596 static void tx_start(SLMP_INFO *info);
597 static void tx_stop(SLMP_INFO *info);
598 static void tx_load_fifo(SLMP_INFO *info);
599 static void tx_set_idle(SLMP_INFO *info);
600 static void tx_load_dma_buffer(SLMP_INFO *info, const char *buf, unsigned int count);
601
602 static void get_signals(SLMP_INFO *info);
603 static void set_signals(SLMP_INFO *info);
604 static void enable_loopback(SLMP_INFO *info, int enable);
605 static void set_rate(SLMP_INFO *info, u32 data_rate);
606
607 static int bh_action(SLMP_INFO *info);
608 static void bh_handler(void* Context);
609 static void bh_receive(SLMP_INFO *info);
610 static void bh_transmit(SLMP_INFO *info);
611 static void bh_status(SLMP_INFO *info);
612 static void isr_timer(SLMP_INFO *info);
613 static void isr_rxint(SLMP_INFO *info);
614 static void isr_rxrdy(SLMP_INFO *info);
615 static void isr_txint(SLMP_INFO *info);
616 static void isr_txrdy(SLMP_INFO *info);
617 static void isr_rxdmaok(SLMP_INFO *info);
618 static void isr_rxdmaerror(SLMP_INFO *info);
619 static void isr_txdmaok(SLMP_INFO *info);
620 static void isr_txdmaerror(SLMP_INFO *info);
621 static void isr_io_pin(SLMP_INFO *info, u16 status);
622
623 static int alloc_dma_bufs(SLMP_INFO *info);
624 static void free_dma_bufs(SLMP_INFO *info);
625 static int alloc_buf_list(SLMP_INFO *info);
626 static int alloc_frame_bufs(SLMP_INFO *info, SCADESC *list, SCADESC_EX *list_ex,int count);
627 static int alloc_tmp_rx_buf(SLMP_INFO *info);
628 static void free_tmp_rx_buf(SLMP_INFO *info);
629
630 static void load_pci_memory(SLMP_INFO *info, char* dest, const char* src, unsigned short count);
631 static void trace_block(SLMP_INFO *info, const char* data, int count, int xmit);
632 static void tx_timeout(unsigned long context);
633 static void status_timeout(unsigned long context);
634
635 static unsigned char read_reg(SLMP_INFO *info, unsigned char addr);
636 static void write_reg(SLMP_INFO *info, unsigned char addr, unsigned char val);
637 static u16 read_reg16(SLMP_INFO *info, unsigned char addr);
638 static void write_reg16(SLMP_INFO *info, unsigned char addr, u16 val);
639 static unsigned char read_status_reg(SLMP_INFO * info);
640 static void write_control_reg(SLMP_INFO * info);
641
642
643 static unsigned char rx_active_fifo_level = 16; // rx request FIFO activation level in bytes
644 static unsigned char tx_active_fifo_level = 16; // tx request FIFO activation level in bytes
645 static unsigned char tx_negate_fifo_level = 32; // tx request FIFO negation level in bytes
646
647 static u32 misc_ctrl_value = 0x007e4040;
648 static u32 lcr1_brdr_value = 0x00800029;
649
650 static u32 read_ahead_count = 8;
651
652 /* DPCR, DMA Priority Control
653 *
654 * 07..05 Not used, must be 0
655 * 04 BRC, bus release condition: 0=all transfers complete
656 * 1=release after 1 xfer on all channels
657 * 03 CCC, channel change condition: 0=every cycle
658 * 1=after each channel completes all xfers
659 * 02..00 PR<2..0>, priority 100=round robin
660 *
661 * 00000100 = 0x00
662 */
663 static unsigned char dma_priority = 0x04;
664
665 // Number of bytes that can be written to shared RAM
666 // in a single write operation
667 static u32 sca_pci_load_interval = 64;
668
669 /*
670 * 1st function defined in .text section. Calling this function in
671 * init_module() followed by a breakpoint allows a remote debugger
672 * (gdb) to get the .text address for the add-symbol-file command.
673 * This allows remote debugging of dynamically loadable modules.
674 */
675 static void* synclinkmp_get_text_ptr(void);
676 static void* synclinkmp_get_text_ptr(void) {return synclinkmp_get_text_ptr;}
677
678 static inline int sanity_check(SLMP_INFO *info,
679 char *name, const char *routine)
680 {
681 #ifdef SANITY_CHECK
682 static const char *badmagic =
683 "Warning: bad magic number for synclinkmp_struct (%s) in %s\n";
684 static const char *badinfo =
685 "Warning: null synclinkmp_struct for (%s) in %s\n";
686
687 if (!info) {
688 printk(badinfo, name, routine);
689 return 1;
690 }
691 if (info->magic != MGSL_MAGIC) {
692 printk(badmagic, name, routine);
693 return 1;
694 }
695 #else
696 if (!info)
697 return 1;
698 #endif
699 return 0;
700 }
701
702 /**
703 * line discipline callback wrappers
704 *
705 * The wrappers maintain line discipline references
706 * while calling into the line discipline.
707 *
708 * ldisc_receive_buf - pass receive data to line discipline
709 */
710
711 static void ldisc_receive_buf(struct tty_struct *tty,
712 const __u8 *data, char *flags, int count)
713 {
714 struct tty_ldisc *ld;
715 if (!tty)
716 return;
717 ld = tty_ldisc_ref(tty);
718 if (ld) {
719 if (ld->receive_buf)
720 ld->receive_buf(tty, data, flags, count);
721 tty_ldisc_deref(ld);
722 }
723 }
724
725 /* tty callbacks */
726
727 /* Called when a port is opened. Init and enable port.
728 */
729 static int open(struct tty_struct *tty, struct file *filp)
730 {
731 SLMP_INFO *info;
732 int retval, line;
733 unsigned long flags;
734
735 line = tty->index;
736 if ((line < 0) || (line >= synclinkmp_device_count)) {
737 printk("%s(%d): open with invalid line #%d.\n",
738 __FILE__,__LINE__,line);
739 return -ENODEV;
740 }
741
742 info = synclinkmp_device_list;
743 while(info && info->line != line)
744 info = info->next_device;
745 if (sanity_check(info, tty->name, "open"))
746 return -ENODEV;
747 if ( info->init_error ) {
748 printk("%s(%d):%s device is not allocated, init error=%d\n",
749 __FILE__,__LINE__,info->device_name,info->init_error);
750 return -ENODEV;
751 }
752
753 tty->driver_data = info;
754 info->tty = tty;
755
756 if (debug_level >= DEBUG_LEVEL_INFO)
757 printk("%s(%d):%s open(), old ref count = %d\n",
758 __FILE__,__LINE__,tty->driver->name, info->count);
759
760 /* If port is closing, signal caller to try again */
761 if (tty_hung_up_p(filp) || info->flags & ASYNC_CLOSING){
762 if (info->flags & ASYNC_CLOSING)
763 interruptible_sleep_on(&info->close_wait);
764 retval = ((info->flags & ASYNC_HUP_NOTIFY) ?
765 -EAGAIN : -ERESTARTSYS);
766 goto cleanup;
767 }
768
769 info->tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
770
771 spin_lock_irqsave(&info->netlock, flags);
772 if (info->netcount) {
773 retval = -EBUSY;
774 spin_unlock_irqrestore(&info->netlock, flags);
775 goto cleanup;
776 }
777 info->count++;
778 spin_unlock_irqrestore(&info->netlock, flags);
779
780 if (info->count == 1) {
781 /* 1st open on this device, init hardware */
782 retval = startup(info);
783 if (retval < 0)
784 goto cleanup;
785 }
786
787 retval = block_til_ready(tty, filp, info);
788 if (retval) {
789 if (debug_level >= DEBUG_LEVEL_INFO)
790 printk("%s(%d):%s block_til_ready() returned %d\n",
791 __FILE__,__LINE__, info->device_name, retval);
792 goto cleanup;
793 }
794
795 if (debug_level >= DEBUG_LEVEL_INFO)
796 printk("%s(%d):%s open() success\n",
797 __FILE__,__LINE__, info->device_name);
798 retval = 0;
799
800 cleanup:
801 if (retval) {
802 if (tty->count == 1)
803 info->tty = NULL; /* tty layer will release tty struct */
804 if(info->count)
805 info->count--;
806 }
807
808 return retval;
809 }
810
811 /* Called when port is closed. Wait for remaining data to be
812 * sent. Disable port and free resources.
813 */
814 static void close(struct tty_struct *tty, struct file *filp)
815 {
816 SLMP_INFO * info = (SLMP_INFO *)tty->driver_data;
817
818 if (sanity_check(info, tty->name, "close"))
819 return;
820
821 if (debug_level >= DEBUG_LEVEL_INFO)
822 printk("%s(%d):%s close() entry, count=%d\n",
823 __FILE__,__LINE__, info->device_name, info->count);
824
825 if (!info->count)
826 return;
827
828 if (tty_hung_up_p(filp))
829 goto cleanup;
830
831 if ((tty->count == 1) && (info->count != 1)) {
832 /*
833 * tty->count is 1 and the tty structure will be freed.
834 * info->count should be one in this case.
835 * if it's not, correct it so that the port is shutdown.
836 */
837 printk("%s(%d):%s close: bad refcount; tty->count is 1, "
838 "info->count is %d\n",
839 __FILE__,__LINE__, info->device_name, info->count);
840 info->count = 1;
841 }
842
843 info->count--;
844
845 /* if at least one open remaining, leave hardware active */
846 if (info->count)
847 goto cleanup;
848
849 info->flags |= ASYNC_CLOSING;
850
851 /* set tty->closing to notify line discipline to
852 * only process XON/XOFF characters. Only the N_TTY
853 * discipline appears to use this (ppp does not).
854 */
855 tty->closing = 1;
856
857 /* wait for transmit data to clear all layers */
858
859 if (info->closing_wait != ASYNC_CLOSING_WAIT_NONE) {
860 if (debug_level >= DEBUG_LEVEL_INFO)
861 printk("%s(%d):%s close() calling tty_wait_until_sent\n",
862 __FILE__,__LINE__, info->device_name );
863 tty_wait_until_sent(tty, info->closing_wait);
864 }
865
866 if (info->flags & ASYNC_INITIALIZED)
867 wait_until_sent(tty, info->timeout);
868
869 if (tty->driver->flush_buffer)
870 tty->driver->flush_buffer(tty);
871
872 tty_ldisc_flush(tty);
873
874 shutdown(info);
875
876 tty->closing = 0;
877 info->tty = NULL;
878
879 if (info->blocked_open) {
880 if (info->close_delay) {
881 msleep_interruptible(jiffies_to_msecs(info->close_delay));
882 }
883 wake_up_interruptible(&info->open_wait);
884 }
885
886 info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
887
888 wake_up_interruptible(&info->close_wait);
889
890 cleanup:
891 if (debug_level >= DEBUG_LEVEL_INFO)
892 printk("%s(%d):%s close() exit, count=%d\n", __FILE__,__LINE__,
893 tty->driver->name, info->count);
894 }
895
896 /* Called by tty_hangup() when a hangup is signaled.
897 * This is the same as closing all open descriptors for the port.
898 */
899 static void hangup(struct tty_struct *tty)
900 {
901 SLMP_INFO *info = (SLMP_INFO *)tty->driver_data;
902
903 if (debug_level >= DEBUG_LEVEL_INFO)
904 printk("%s(%d):%s hangup()\n",
905 __FILE__,__LINE__, info->device_name );
906
907 if (sanity_check(info, tty->name, "hangup"))
908 return;
909
910 flush_buffer(tty);
911 shutdown(info);
912
913 info->count = 0;
914 info->flags &= ~ASYNC_NORMAL_ACTIVE;
915 info->tty = NULL;
916
917 wake_up_interruptible(&info->open_wait);
918 }
919
920 /* Set new termios settings
921 */
922 static void set_termios(struct tty_struct *tty, struct termios *old_termios)
923 {
924 SLMP_INFO *info = (SLMP_INFO *)tty->driver_data;
925 unsigned long flags;
926
927 if (debug_level >= DEBUG_LEVEL_INFO)
928 printk("%s(%d):%s set_termios()\n", __FILE__,__LINE__,
929 tty->driver->name );
930
931 /* just return if nothing has changed */
932 if ((tty->termios->c_cflag == old_termios->c_cflag)
933 && (RELEVANT_IFLAG(tty->termios->c_iflag)
934 == RELEVANT_IFLAG(old_termios->c_iflag)))
935 return;
936
937 change_params(info);
938
939 /* Handle transition to B0 status */
940 if (old_termios->c_cflag & CBAUD &&
941 !(tty->termios->c_cflag & CBAUD)) {
942 info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
943 spin_lock_irqsave(&info->lock,flags);
944 set_signals(info);
945 spin_unlock_irqrestore(&info->lock,flags);
946 }
947
948 /* Handle transition away from B0 status */
949 if (!(old_termios->c_cflag & CBAUD) &&
950 tty->termios->c_cflag & CBAUD) {
951 info->serial_signals |= SerialSignal_DTR;
952 if (!(tty->termios->c_cflag & CRTSCTS) ||
953 !test_bit(TTY_THROTTLED, &tty->flags)) {
954 info->serial_signals |= SerialSignal_RTS;
955 }
956 spin_lock_irqsave(&info->lock,flags);
957 set_signals(info);
958 spin_unlock_irqrestore(&info->lock,flags);
959 }
960
961 /* Handle turning off CRTSCTS */
962 if (old_termios->c_cflag & CRTSCTS &&
963 !(tty->termios->c_cflag & CRTSCTS)) {
964 tty->hw_stopped = 0;
965 tx_release(tty);
966 }
967 }
968
969 /* Send a block of data
970 *
971 * Arguments:
972 *
973 * tty pointer to tty information structure
974 * buf pointer to buffer containing send data
975 * count size of send data in bytes
976 *
977 * Return Value: number of characters written
978 */
979 static int write(struct tty_struct *tty,
980 const unsigned char *buf, int count)
981 {
982 int c, ret = 0;
983 SLMP_INFO *info = (SLMP_INFO *)tty->driver_data;
984 unsigned long flags;
985
986 if (debug_level >= DEBUG_LEVEL_INFO)
987 printk("%s(%d):%s write() count=%d\n",
988 __FILE__,__LINE__,info->device_name,count);
989
990 if (sanity_check(info, tty->name, "write"))
991 goto cleanup;
992
993 if (!tty || !info->tx_buf)
994 goto cleanup;
995
996 if (info->params.mode == MGSL_MODE_HDLC) {
997 if (count > info->max_frame_size) {
998 ret = -EIO;
999 goto cleanup;
1000 }
1001 if (info->tx_active)
1002 goto cleanup;
1003 if (info->tx_count) {
1004 /* send accumulated data from send_char() calls */
1005 /* as frame and wait before accepting more data. */
1006 tx_load_dma_buffer(info, info->tx_buf, info->tx_count);
1007 goto start;
1008 }
1009 ret = info->tx_count = count;
1010 tx_load_dma_buffer(info, buf, count);
1011 goto start;
1012 }
1013
1014 for (;;) {
1015 c = min_t(int, count,
1016 min(info->max_frame_size - info->tx_count - 1,
1017 info->max_frame_size - info->tx_put));
1018 if (c <= 0)
1019 break;
1020
1021 memcpy(info->tx_buf + info->tx_put, buf, c);
1022
1023 spin_lock_irqsave(&info->lock,flags);
1024 info->tx_put += c;
1025 if (info->tx_put >= info->max_frame_size)
1026 info->tx_put -= info->max_frame_size;
1027 info->tx_count += c;
1028 spin_unlock_irqrestore(&info->lock,flags);
1029
1030 buf += c;
1031 count -= c;
1032 ret += c;
1033 }
1034
1035 if (info->params.mode == MGSL_MODE_HDLC) {
1036 if (count) {
1037 ret = info->tx_count = 0;
1038 goto cleanup;
1039 }
1040 tx_load_dma_buffer(info, info->tx_buf, info->tx_count);
1041 }
1042 start:
1043 if (info->tx_count && !tty->stopped && !tty->hw_stopped) {
1044 spin_lock_irqsave(&info->lock,flags);
1045 if (!info->tx_active)
1046 tx_start(info);
1047 spin_unlock_irqrestore(&info->lock,flags);
1048 }
1049
1050 cleanup:
1051 if (debug_level >= DEBUG_LEVEL_INFO)
1052 printk( "%s(%d):%s write() returning=%d\n",
1053 __FILE__,__LINE__,info->device_name,ret);
1054 return ret;
1055 }
1056
1057 /* Add a character to the transmit buffer.
1058 */
1059 static void put_char(struct tty_struct *tty, unsigned char ch)
1060 {
1061 SLMP_INFO *info = (SLMP_INFO *)tty->driver_data;
1062 unsigned long flags;
1063
1064 if ( debug_level >= DEBUG_LEVEL_INFO ) {
1065 printk( "%s(%d):%s put_char(%d)\n",
1066 __FILE__,__LINE__,info->device_name,ch);
1067 }
1068
1069 if (sanity_check(info, tty->name, "put_char"))
1070 return;
1071
1072 if (!tty || !info->tx_buf)
1073 return;
1074
1075 spin_lock_irqsave(&info->lock,flags);
1076
1077 if ( (info->params.mode != MGSL_MODE_HDLC) ||
1078 !info->tx_active ) {
1079
1080 if (info->tx_count < info->max_frame_size - 1) {
1081 info->tx_buf[info->tx_put++] = ch;
1082 if (info->tx_put >= info->max_frame_size)
1083 info->tx_put -= info->max_frame_size;
1084 info->tx_count++;
1085 }
1086 }
1087
1088 spin_unlock_irqrestore(&info->lock,flags);
1089 }
1090
1091 /* Send a high-priority XON/XOFF character
1092 */
1093 static void send_xchar(struct tty_struct *tty, char ch)
1094 {
1095 SLMP_INFO *info = (SLMP_INFO *)tty->driver_data;
1096 unsigned long flags;
1097
1098 if (debug_level >= DEBUG_LEVEL_INFO)
1099 printk("%s(%d):%s send_xchar(%d)\n",
1100 __FILE__,__LINE__, info->device_name, ch );
1101
1102 if (sanity_check(info, tty->name, "send_xchar"))
1103 return;
1104
1105 info->x_char = ch;
1106 if (ch) {
1107 /* Make sure transmit interrupts are on */
1108 spin_lock_irqsave(&info->lock,flags);
1109 if (!info->tx_enabled)
1110 tx_start(info);
1111 spin_unlock_irqrestore(&info->lock,flags);
1112 }
1113 }
1114
1115 /* Wait until the transmitter is empty.
1116 */
1117 static void wait_until_sent(struct tty_struct *tty, int timeout)
1118 {
1119 SLMP_INFO * info = (SLMP_INFO *)tty->driver_data;
1120 unsigned long orig_jiffies, char_time;
1121
1122 if (!info )
1123 return;
1124
1125 if (debug_level >= DEBUG_LEVEL_INFO)
1126 printk("%s(%d):%s wait_until_sent() entry\n",
1127 __FILE__,__LINE__, info->device_name );
1128
1129 if (sanity_check(info, tty->name, "wait_until_sent"))
1130 return;
1131
1132 if (!(info->flags & ASYNC_INITIALIZED))
1133 goto exit;
1134
1135 orig_jiffies = jiffies;
1136
1137 /* Set check interval to 1/5 of estimated time to
1138 * send a character, and make it at least 1. The check
1139 * interval should also be less than the timeout.
1140 * Note: use tight timings here to satisfy the NIST-PCTS.
1141 */
1142
1143 if ( info->params.data_rate ) {
1144 char_time = info->timeout/(32 * 5);
1145 if (!char_time)
1146 char_time++;
1147 } else
1148 char_time = 1;
1149
1150 if (timeout)
1151 char_time = min_t(unsigned long, char_time, timeout);
1152
1153 if ( info->params.mode == MGSL_MODE_HDLC ) {
1154 while (info->tx_active) {
1155 msleep_interruptible(jiffies_to_msecs(char_time));
1156 if (signal_pending(current))
1157 break;
1158 if (timeout && time_after(jiffies, orig_jiffies + timeout))
1159 break;
1160 }
1161 } else {
1162 //TODO: determine if there is something similar to USC16C32
1163 // TXSTATUS_ALL_SENT status
1164 while ( info->tx_active && info->tx_enabled) {
1165 msleep_interruptible(jiffies_to_msecs(char_time));
1166 if (signal_pending(current))
1167 break;
1168 if (timeout && time_after(jiffies, orig_jiffies + timeout))
1169 break;
1170 }
1171 }
1172
1173 exit:
1174 if (debug_level >= DEBUG_LEVEL_INFO)
1175 printk("%s(%d):%s wait_until_sent() exit\n",
1176 __FILE__,__LINE__, info->device_name );
1177 }
1178
1179 /* Return the count of free bytes in transmit buffer
1180 */
1181 static int write_room(struct tty_struct *tty)
1182 {
1183 SLMP_INFO *info = (SLMP_INFO *)tty->driver_data;
1184 int ret;
1185
1186 if (sanity_check(info, tty->name, "write_room"))
1187 return 0;
1188
1189 if (info->params.mode == MGSL_MODE_HDLC) {
1190 ret = (info->tx_active) ? 0 : HDLC_MAX_FRAME_SIZE;
1191 } else {
1192 ret = info->max_frame_size - info->tx_count - 1;
1193 if (ret < 0)
1194 ret = 0;
1195 }
1196
1197 if (debug_level >= DEBUG_LEVEL_INFO)
1198 printk("%s(%d):%s write_room()=%d\n",
1199 __FILE__, __LINE__, info->device_name, ret);
1200
1201 return ret;
1202 }
1203
1204 /* enable transmitter and send remaining buffered characters
1205 */
1206 static void flush_chars(struct tty_struct *tty)
1207 {
1208 SLMP_INFO *info = (SLMP_INFO *)tty->driver_data;
1209 unsigned long flags;
1210
1211 if ( debug_level >= DEBUG_LEVEL_INFO )
1212 printk( "%s(%d):%s flush_chars() entry tx_count=%d\n",
1213 __FILE__,__LINE__,info->device_name,info->tx_count);
1214
1215 if (sanity_check(info, tty->name, "flush_chars"))
1216 return;
1217
1218 if (info->tx_count <= 0 || tty->stopped || tty->hw_stopped ||
1219 !info->tx_buf)
1220 return;
1221
1222 if ( debug_level >= DEBUG_LEVEL_INFO )
1223 printk( "%s(%d):%s flush_chars() entry, starting transmitter\n",
1224 __FILE__,__LINE__,info->device_name );
1225
1226 spin_lock_irqsave(&info->lock,flags);
1227
1228 if (!info->tx_active) {
1229 if ( (info->params.mode == MGSL_MODE_HDLC) &&
1230 info->tx_count ) {
1231 /* operating in synchronous (frame oriented) mode */
1232 /* copy data from circular tx_buf to */
1233 /* transmit DMA buffer. */
1234 tx_load_dma_buffer(info,
1235 info->tx_buf,info->tx_count);
1236 }
1237 tx_start(info);
1238 }
1239
1240 spin_unlock_irqrestore(&info->lock,flags);
1241 }
1242
1243 /* Discard all data in the send buffer
1244 */
1245 static void flush_buffer(struct tty_struct *tty)
1246 {
1247 SLMP_INFO *info = (SLMP_INFO *)tty->driver_data;
1248 unsigned long flags;
1249
1250 if (debug_level >= DEBUG_LEVEL_INFO)
1251 printk("%s(%d):%s flush_buffer() entry\n",
1252 __FILE__,__LINE__, info->device_name );
1253
1254 if (sanity_check(info, tty->name, "flush_buffer"))
1255 return;
1256
1257 spin_lock_irqsave(&info->lock,flags);
1258 info->tx_count = info->tx_put = info->tx_get = 0;
1259 del_timer(&info->tx_timer);
1260 spin_unlock_irqrestore(&info->lock,flags);
1261
1262 wake_up_interruptible(&tty->write_wait);
1263 tty_wakeup(tty);
1264 }
1265
1266 /* throttle (stop) transmitter
1267 */
1268 static void tx_hold(struct tty_struct *tty)
1269 {
1270 SLMP_INFO *info = (SLMP_INFO *)tty->driver_data;
1271 unsigned long flags;
1272
1273 if (sanity_check(info, tty->name, "tx_hold"))
1274 return;
1275
1276 if ( debug_level >= DEBUG_LEVEL_INFO )
1277 printk("%s(%d):%s tx_hold()\n",
1278 __FILE__,__LINE__,info->device_name);
1279
1280 spin_lock_irqsave(&info->lock,flags);
1281 if (info->tx_enabled)
1282 tx_stop(info);
1283 spin_unlock_irqrestore(&info->lock,flags);
1284 }
1285
1286 /* release (start) transmitter
1287 */
1288 static void tx_release(struct tty_struct *tty)
1289 {
1290 SLMP_INFO *info = (SLMP_INFO *)tty->driver_data;
1291 unsigned long flags;
1292
1293 if (sanity_check(info, tty->name, "tx_release"))
1294 return;
1295
1296 if ( debug_level >= DEBUG_LEVEL_INFO )
1297 printk("%s(%d):%s tx_release()\n",
1298 __FILE__,__LINE__,info->device_name);
1299
1300 spin_lock_irqsave(&info->lock,flags);
1301 if (!info->tx_enabled)
1302 tx_start(info);
1303 spin_unlock_irqrestore(&info->lock,flags);
1304 }
1305
1306 /* Service an IOCTL request
1307 *
1308 * Arguments:
1309 *
1310 * tty pointer to tty instance data
1311 * file pointer to associated file object for device
1312 * cmd IOCTL command code
1313 * arg command argument/context
1314 *
1315 * Return Value: 0 if success, otherwise error code
1316 */
1317 static int ioctl(struct tty_struct *tty, struct file *file,
1318 unsigned int cmd, unsigned long arg)
1319 {
1320 SLMP_INFO *info = (SLMP_INFO *)tty->driver_data;
1321 int error;
1322 struct mgsl_icount cnow; /* kernel counter temps */
1323 struct serial_icounter_struct __user *p_cuser; /* user space */
1324 unsigned long flags;
1325 void __user *argp = (void __user *)arg;
1326
1327 if (debug_level >= DEBUG_LEVEL_INFO)
1328 printk("%s(%d):%s ioctl() cmd=%08X\n", __FILE__,__LINE__,
1329 info->device_name, cmd );
1330
1331 if (sanity_check(info, tty->name, "ioctl"))
1332 return -ENODEV;
1333
1334 if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
1335 (cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) {
1336 if (tty->flags & (1 << TTY_IO_ERROR))
1337 return -EIO;
1338 }
1339
1340 switch (cmd) {
1341 case MGSL_IOCGPARAMS:
1342 return get_params(info, argp);
1343 case MGSL_IOCSPARAMS:
1344 return set_params(info, argp);
1345 case MGSL_IOCGTXIDLE:
1346 return get_txidle(info, argp);
1347 case MGSL_IOCSTXIDLE:
1348 return set_txidle(info, (int)arg);
1349 case MGSL_IOCTXENABLE:
1350 return tx_enable(info, (int)arg);
1351 case MGSL_IOCRXENABLE:
1352 return rx_enable(info, (int)arg);
1353 case MGSL_IOCTXABORT:
1354 return tx_abort(info);
1355 case MGSL_IOCGSTATS:
1356 return get_stats(info, argp);
1357 case MGSL_IOCWAITEVENT:
1358 return wait_mgsl_event(info, argp);
1359 case MGSL_IOCLOOPTXDONE:
1360 return 0; // TODO: Not supported, need to document
1361 /* Wait for modem input (DCD,RI,DSR,CTS) change
1362 * as specified by mask in arg (TIOCM_RNG/DSR/CD/CTS)
1363 */
1364 case TIOCMIWAIT:
1365 return modem_input_wait(info,(int)arg);
1366
1367 /*
1368 * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
1369 * Return: write counters to the user passed counter struct
1370 * NB: both 1->0 and 0->1 transitions are counted except for
1371 * RI where only 0->1 is counted.
1372 */
1373 case TIOCGICOUNT:
1374 spin_lock_irqsave(&info->lock,flags);
1375 cnow = info->icount;
1376 spin_unlock_irqrestore(&info->lock,flags);
1377 p_cuser = argp;
1378 PUT_USER(error,cnow.cts, &p_cuser->cts);
1379 if (error) return error;
1380 PUT_USER(error,cnow.dsr, &p_cuser->dsr);
1381 if (error) return error;
1382 PUT_USER(error,cnow.rng, &p_cuser->rng);
1383 if (error) return error;
1384 PUT_USER(error,cnow.dcd, &p_cuser->dcd);
1385 if (error) return error;
1386 PUT_USER(error,cnow.rx, &p_cuser->rx);
1387 if (error) return error;
1388 PUT_USER(error,cnow.tx, &p_cuser->tx);
1389 if (error) return error;
1390 PUT_USER(error,cnow.frame, &p_cuser->frame);
1391 if (error) return error;
1392 PUT_USER(error,cnow.overrun, &p_cuser->overrun);
1393 if (error) return error;
1394 PUT_USER(error,cnow.parity, &p_cuser->parity);
1395 if (error) return error;
1396 PUT_USER(error,cnow.brk, &p_cuser->brk);
1397 if (error) return error;
1398 PUT_USER(error,cnow.buf_overrun, &p_cuser->buf_overrun);
1399 if (error) return error;
1400 return 0;
1401 default:
1402 return -ENOIOCTLCMD;
1403 }
1404 return 0;
1405 }
1406
1407 /*
1408 * /proc fs routines....
1409 */
1410
1411 static inline int line_info(char *buf, SLMP_INFO *info)
1412 {
1413 char stat_buf[30];
1414 int ret;
1415 unsigned long flags;
1416
1417 ret = sprintf(buf, "%s: SCABase=%08x Mem=%08X StatusControl=%08x LCR=%08X\n"
1418 "\tIRQ=%d MaxFrameSize=%u\n",
1419 info->device_name,
1420 info->phys_sca_base,
1421 info->phys_memory_base,
1422 info->phys_statctrl_base,
1423 info->phys_lcr_base,
1424 info->irq_level,
1425 info->max_frame_size );
1426
1427 /* output current serial signal states */
1428 spin_lock_irqsave(&info->lock,flags);
1429 get_signals(info);
1430 spin_unlock_irqrestore(&info->lock,flags);
1431
1432 stat_buf[0] = 0;
1433 stat_buf[1] = 0;
1434 if (info->serial_signals & SerialSignal_RTS)
1435 strcat(stat_buf, "|RTS");
1436 if (info->serial_signals & SerialSignal_CTS)
1437 strcat(stat_buf, "|CTS");
1438 if (info->serial_signals & SerialSignal_DTR)
1439 strcat(stat_buf, "|DTR");
1440 if (info->serial_signals & SerialSignal_DSR)
1441 strcat(stat_buf, "|DSR");
1442 if (info->serial_signals & SerialSignal_DCD)
1443 strcat(stat_buf, "|CD");
1444 if (info->serial_signals & SerialSignal_RI)
1445 strcat(stat_buf, "|RI");
1446
1447 if (info->params.mode == MGSL_MODE_HDLC) {
1448 ret += sprintf(buf+ret, "\tHDLC txok:%d rxok:%d",
1449 info->icount.txok, info->icount.rxok);
1450 if (info->icount.txunder)
1451 ret += sprintf(buf+ret, " txunder:%d", info->icount.txunder);
1452 if (info->icount.txabort)
1453 ret += sprintf(buf+ret, " txabort:%d", info->icount.txabort);
1454 if (info->icount.rxshort)
1455 ret += sprintf(buf+ret, " rxshort:%d", info->icount.rxshort);
1456 if (info->icount.rxlong)
1457 ret += sprintf(buf+ret, " rxlong:%d", info->icount.rxlong);
1458 if (info->icount.rxover)
1459 ret += sprintf(buf+ret, " rxover:%d", info->icount.rxover);
1460 if (info->icount.rxcrc)
1461 ret += sprintf(buf+ret, " rxlong:%d", info->icount.rxcrc);
1462 } else {
1463 ret += sprintf(buf+ret, "\tASYNC tx:%d rx:%d",
1464 info->icount.tx, info->icount.rx);
1465 if (info->icount.frame)
1466 ret += sprintf(buf+ret, " fe:%d", info->icount.frame);
1467 if (info->icount.parity)
1468 ret += sprintf(buf+ret, " pe:%d", info->icount.parity);
1469 if (info->icount.brk)
1470 ret += sprintf(buf+ret, " brk:%d", info->icount.brk);
1471 if (info->icount.overrun)
1472 ret += sprintf(buf+ret, " oe:%d", info->icount.overrun);
1473 }
1474
1475 /* Append serial signal status to end */
1476 ret += sprintf(buf+ret, " %s\n", stat_buf+1);
1477
1478 ret += sprintf(buf+ret, "\ttxactive=%d bh_req=%d bh_run=%d pending_bh=%x\n",
1479 info->tx_active,info->bh_requested,info->bh_running,
1480 info->pending_bh);
1481
1482 return ret;
1483 }
1484
1485 /* Called to print information about devices
1486 */
1487 int read_proc(char *page, char **start, off_t off, int count,
1488 int *eof, void *data)
1489 {
1490 int len = 0, l;
1491 off_t begin = 0;
1492 SLMP_INFO *info;
1493
1494 len += sprintf(page, "synclinkmp driver:%s\n", driver_version);
1495
1496 info = synclinkmp_device_list;
1497 while( info ) {
1498 l = line_info(page + len, info);
1499 len += l;
1500 if (len+begin > off+count)
1501 goto done;
1502 if (len+begin < off) {
1503 begin += len;
1504 len = 0;
1505 }
1506 info = info->next_device;
1507 }
1508
1509 *eof = 1;
1510 done:
1511 if (off >= len+begin)
1512 return 0;
1513 *start = page + (off-begin);
1514 return ((count < begin+len-off) ? count : begin+len-off);
1515 }
1516
1517 /* Return the count of bytes in transmit buffer
1518 */
1519 static int chars_in_buffer(struct tty_struct *tty)
1520 {
1521 SLMP_INFO *info = (SLMP_INFO *)tty->driver_data;
1522
1523 if (sanity_check(info, tty->name, "chars_in_buffer"))
1524 return 0;
1525
1526 if (debug_level >= DEBUG_LEVEL_INFO)
1527 printk("%s(%d):%s chars_in_buffer()=%d\n",
1528 __FILE__, __LINE__, info->device_name, info->tx_count);
1529
1530 return info->tx_count;
1531 }
1532
1533 /* Signal remote device to throttle send data (our receive data)
1534 */
1535 static void throttle(struct tty_struct * tty)
1536 {
1537 SLMP_INFO *info = (SLMP_INFO *)tty->driver_data;
1538 unsigned long flags;
1539
1540 if (debug_level >= DEBUG_LEVEL_INFO)
1541 printk("%s(%d):%s throttle() entry\n",
1542 __FILE__,__LINE__, info->device_name );
1543
1544 if (sanity_check(info, tty->name, "throttle"))
1545 return;
1546
1547 if (I_IXOFF(tty))
1548 send_xchar(tty, STOP_CHAR(tty));
1549
1550 if (tty->termios->c_cflag & CRTSCTS) {
1551 spin_lock_irqsave(&info->lock,flags);
1552 info->serial_signals &= ~SerialSignal_RTS;
1553 set_signals(info);
1554 spin_unlock_irqrestore(&info->lock,flags);
1555 }
1556 }
1557
1558 /* Signal remote device to stop throttling send data (our receive data)
1559 */
1560 static void unthrottle(struct tty_struct * tty)
1561 {
1562 SLMP_INFO *info = (SLMP_INFO *)tty->driver_data;
1563 unsigned long flags;
1564
1565 if (debug_level >= DEBUG_LEVEL_INFO)
1566 printk("%s(%d):%s unthrottle() entry\n",
1567 __FILE__,__LINE__, info->device_name );
1568
1569 if (sanity_check(info, tty->name, "unthrottle"))
1570 return;
1571
1572 if (I_IXOFF(tty)) {
1573 if (info->x_char)
1574 info->x_char = 0;
1575 else
1576 send_xchar(tty, START_CHAR(tty));
1577 }
1578
1579 if (tty->termios->c_cflag & CRTSCTS) {
1580 spin_lock_irqsave(&info->lock,flags);
1581 info->serial_signals |= SerialSignal_RTS;
1582 set_signals(info);
1583 spin_unlock_irqrestore(&info->lock,flags);
1584 }
1585 }
1586
1587 /* set or clear transmit break condition
1588 * break_state -1=set break condition, 0=clear
1589 */
1590 static void set_break(struct tty_struct *tty, int break_state)
1591 {
1592 unsigned char RegValue;
1593 SLMP_INFO * info = (SLMP_INFO *)tty->driver_data;
1594 unsigned long flags;
1595
1596 if (debug_level >= DEBUG_LEVEL_INFO)
1597 printk("%s(%d):%s set_break(%d)\n",
1598 __FILE__,__LINE__, info->device_name, break_state);
1599
1600 if (sanity_check(info, tty->name, "set_break"))
1601 return;
1602
1603 spin_lock_irqsave(&info->lock,flags);
1604 RegValue = read_reg(info, CTL);
1605 if (break_state == -1)
1606 RegValue |= BIT3;
1607 else
1608 RegValue &= ~BIT3;
1609 write_reg(info, CTL, RegValue);
1610 spin_unlock_irqrestore(&info->lock,flags);
1611 }
1612
1613 #ifdef CONFIG_HDLC
1614
1615 /**
1616 * called by generic HDLC layer when protocol selected (PPP, frame relay, etc.)
1617 * set encoding and frame check sequence (FCS) options
1618 *
1619 * dev pointer to network device structure
1620 * encoding serial encoding setting
1621 * parity FCS setting
1622 *
1623 * returns 0 if success, otherwise error code
1624 */
1625 static int hdlcdev_attach(struct net_device *dev, unsigned short encoding,
1626 unsigned short parity)
1627 {
1628 SLMP_INFO *info = dev_to_port(dev);
1629 unsigned char new_encoding;
1630 unsigned short new_crctype;
1631
1632 /* return error if TTY interface open */
1633 if (info->count)
1634 return -EBUSY;
1635
1636 switch (encoding)
1637 {
1638 case ENCODING_NRZ: new_encoding = HDLC_ENCODING_NRZ; break;
1639 case ENCODING_NRZI: new_encoding = HDLC_ENCODING_NRZI_SPACE; break;
1640 case ENCODING_FM_MARK: new_encoding = HDLC_ENCODING_BIPHASE_MARK; break;
1641 case ENCODING_FM_SPACE: new_encoding = HDLC_ENCODING_BIPHASE_SPACE; break;
1642 case ENCODING_MANCHESTER: new_encoding = HDLC_ENCODING_BIPHASE_LEVEL; break;
1643 default: return -EINVAL;
1644 }
1645
1646 switch (parity)
1647 {
1648 case PARITY_NONE: new_crctype = HDLC_CRC_NONE; break;
1649 case PARITY_CRC16_PR1_CCITT: new_crctype = HDLC_CRC_16_CCITT; break;
1650 case PARITY_CRC32_PR1_CCITT: new_crctype = HDLC_CRC_32_CCITT; break;
1651 default: return -EINVAL;
1652 }
1653
1654 info->params.encoding = new_encoding;
1655 info->params.crc_type = new_crctype;;
1656
1657 /* if network interface up, reprogram hardware */
1658 if (info->netcount)
1659 program_hw(info);
1660
1661 return 0;
1662 }
1663
1664 /**
1665 * called by generic HDLC layer to send frame
1666 *
1667 * skb socket buffer containing HDLC frame
1668 * dev pointer to network device structure
1669 *
1670 * returns 0 if success, otherwise error code
1671 */
1672 static int hdlcdev_xmit(struct sk_buff *skb, struct net_device *dev)
1673 {
1674 SLMP_INFO *info = dev_to_port(dev);
1675 struct net_device_stats *stats = hdlc_stats(dev);
1676 unsigned long flags;
1677
1678 if (debug_level >= DEBUG_LEVEL_INFO)
1679 printk(KERN_INFO "%s:hdlc_xmit(%s)\n",__FILE__,dev->name);
1680
1681 /* stop sending until this frame completes */
1682 netif_stop_queue(dev);
1683
1684 /* copy data to device buffers */
1685 info->tx_count = skb->len;
1686 tx_load_dma_buffer(info, skb->data, skb->len);
1687
1688 /* update network statistics */
1689 stats->tx_packets++;
1690 stats->tx_bytes += skb->len;
1691
1692 /* done with socket buffer, so free it */
1693 dev_kfree_skb(skb);
1694
1695 /* save start time for transmit timeout detection */
1696 dev->trans_start = jiffies;
1697
1698 /* start hardware transmitter if necessary */
1699 spin_lock_irqsave(&info->lock,flags);
1700 if (!info->tx_active)
1701 tx_start(info);
1702 spin_unlock_irqrestore(&info->lock,flags);
1703
1704 return 0;
1705 }
1706
1707 /**
1708 * called by network layer when interface enabled
1709 * claim resources and initialize hardware
1710 *
1711 * dev pointer to network device structure
1712 *
1713 * returns 0 if success, otherwise error code
1714 */
1715 static int hdlcdev_open(struct net_device *dev)
1716 {
1717 SLMP_INFO *info = dev_to_port(dev);
1718 int rc;
1719 unsigned long flags;
1720
1721 if (debug_level >= DEBUG_LEVEL_INFO)
1722 printk("%s:hdlcdev_open(%s)\n",__FILE__,dev->name);
1723
1724 /* generic HDLC layer open processing */
1725 if ((rc = hdlc_open(dev)))
1726 return rc;
1727
1728 /* arbitrate between network and tty opens */
1729 spin_lock_irqsave(&info->netlock, flags);
1730 if (info->count != 0 || info->netcount != 0) {
1731 printk(KERN_WARNING "%s: hdlc_open returning busy\n", dev->name);
1732 spin_unlock_irqrestore(&info->netlock, flags);
1733 return -EBUSY;
1734 }
1735 info->netcount=1;
1736 spin_unlock_irqrestore(&info->netlock, flags);
1737
1738 /* claim resources and init adapter */
1739 if ((rc = startup(info)) != 0) {
1740 spin_lock_irqsave(&info->netlock, flags);
1741 info->netcount=0;
1742 spin_unlock_irqrestore(&info->netlock, flags);
1743 return rc;
1744 }
1745
1746 /* assert DTR and RTS, apply hardware settings */
1747 info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR;
1748 program_hw(info);
1749
1750 /* enable network layer transmit */
1751 dev->trans_start = jiffies;
1752 netif_start_queue(dev);
1753
1754 /* inform generic HDLC layer of current DCD status */
1755 spin_lock_irqsave(&info->lock, flags);
1756 get_signals(info);
1757 spin_unlock_irqrestore(&info->lock, flags);
1758 hdlc_set_carrier(info->serial_signals & SerialSignal_DCD, dev);
1759
1760 return 0;
1761 }
1762
1763 /**
1764 * called by network layer when interface is disabled
1765 * shutdown hardware and release resources
1766 *
1767 * dev pointer to network device structure
1768 *
1769 * returns 0 if success, otherwise error code
1770 */
1771 static int hdlcdev_close(struct net_device *dev)
1772 {
1773 SLMP_INFO *info = dev_to_port(dev);
1774 unsigned long flags;
1775
1776 if (debug_level >= DEBUG_LEVEL_INFO)
1777 printk("%s:hdlcdev_close(%s)\n",__FILE__,dev->name);
1778
1779 netif_stop_queue(dev);
1780
1781 /* shutdown adapter and release resources */
1782 shutdown(info);
1783
1784 hdlc_close(dev);
1785
1786 spin_lock_irqsave(&info->netlock, flags);
1787 info->netcount=0;
1788 spin_unlock_irqrestore(&info->netlock, flags);
1789
1790 return 0;
1791 }
1792
1793 /**
1794 * called by network layer to process IOCTL call to network device
1795 *
1796 * dev pointer to network device structure
1797 * ifr pointer to network interface request structure
1798 * cmd IOCTL command code
1799 *
1800 * returns 0 if success, otherwise error code
1801 */
1802 static int hdlcdev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
1803 {
1804 const size_t size = sizeof(sync_serial_settings);
1805 sync_serial_settings new_line;
1806 sync_serial_settings __user *line = ifr->ifr_settings.ifs_ifsu.sync;
1807 SLMP_INFO *info = dev_to_port(dev);
1808 unsigned int flags;
1809
1810 if (debug_level >= DEBUG_LEVEL_INFO)
1811 printk("%s:hdlcdev_ioctl(%s)\n",__FILE__,dev->name);
1812
1813 /* return error if TTY interface open */
1814 if (info->count)
1815 return -EBUSY;
1816
1817 if (cmd != SIOCWANDEV)
1818 return hdlc_ioctl(dev, ifr, cmd);
1819
1820 switch(ifr->ifr_settings.type) {
1821 case IF_GET_IFACE: /* return current sync_serial_settings */
1822
1823 ifr->ifr_settings.type = IF_IFACE_SYNC_SERIAL;
1824 if (ifr->ifr_settings.size < size) {
1825 ifr->ifr_settings.size = size; /* data size wanted */
1826 return -ENOBUFS;
1827 }
1828
1829 flags = info->params.flags & (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
1830 HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN |
1831 HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
1832 HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN);
1833
1834 switch (flags){
1835 case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN): new_line.clock_type = CLOCK_EXT; break;
1836 case (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_INT; break;
1837 case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_TXINT; break;
1838 case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN): new_line.clock_type = CLOCK_TXFROMRX; break;
1839 default: new_line.clock_type = CLOCK_DEFAULT;
1840 }
1841
1842 new_line.clock_rate = info->params.clock_speed;
1843 new_line.loopback = info->params.loopback ? 1:0;
1844
1845 if (copy_to_user(line, &new_line, size))
1846 return -EFAULT;
1847 return 0;
1848
1849 case IF_IFACE_SYNC_SERIAL: /* set sync_serial_settings */
1850
1851 if(!capable(CAP_NET_ADMIN))
1852 return -EPERM;
1853 if (copy_from_user(&new_line, line, size))
1854 return -EFAULT;
1855
1856 switch (new_line.clock_type)
1857 {
1858 case CLOCK_EXT: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN; break;
1859 case CLOCK_TXFROMRX: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN; break;
1860 case CLOCK_INT: flags = HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG; break;
1861 case CLOCK_TXINT: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG; break;
1862 case CLOCK_DEFAULT: flags = info->params.flags &
1863 (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
1864 HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN |
1865 HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
1866 HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN); break;
1867 default: return -EINVAL;
1868 }
1869
1870 if (new_line.loopback != 0 && new_line.loopback != 1)
1871 return -EINVAL;
1872
1873 info->params.flags &= ~(HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
1874 HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN |
1875 HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
1876 HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN);
1877 info->params.flags |= flags;
1878
1879 info->params.loopback = new_line.loopback;
1880
1881 if (flags & (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG))
1882 info->params.clock_speed = new_line.clock_rate;
1883 else
1884 info->params.clock_speed = 0;
1885
1886 /* if network interface up, reprogram hardware */
1887 if (info->netcount)
1888 program_hw(info);
1889 return 0;
1890
1891 default:
1892 return hdlc_ioctl(dev, ifr, cmd);
1893 }
1894 }
1895
1896 /**
1897 * called by network layer when transmit timeout is detected
1898 *
1899 * dev pointer to network device structure
1900 */
1901 static void hdlcdev_tx_timeout(struct net_device *dev)
1902 {
1903 SLMP_INFO *info = dev_to_port(dev);
1904 struct net_device_stats *stats = hdlc_stats(dev);
1905 unsigned long flags;
1906
1907 if (debug_level >= DEBUG_LEVEL_INFO)
1908 printk("hdlcdev_tx_timeout(%s)\n",dev->name);
1909
1910 stats->tx_errors++;
1911 stats->tx_aborted_errors++;
1912
1913 spin_lock_irqsave(&info->lock,flags);
1914 tx_stop(info);
1915 spin_unlock_irqrestore(&info->lock,flags);
1916
1917 netif_wake_queue(dev);
1918 }
1919
1920 /**
1921 * called by device driver when transmit completes
1922 * reenable network layer transmit if stopped
1923 *
1924 * info pointer to device instance information
1925 */
1926 static void hdlcdev_tx_done(SLMP_INFO *info)
1927 {
1928 if (netif_queue_stopped(info->netdev))
1929 netif_wake_queue(info->netdev);
1930 }
1931
1932 /**
1933 * called by device driver when frame received
1934 * pass frame to network layer
1935 *
1936 * info pointer to device instance information
1937 * buf pointer to buffer contianing frame data
1938 * size count of data bytes in buf
1939 */
1940 static void hdlcdev_rx(SLMP_INFO *info, char *buf, int size)
1941 {
1942 struct sk_buff *skb = dev_alloc_skb(size);
1943 struct net_device *dev = info->netdev;
1944 struct net_device_stats *stats = hdlc_stats(dev);
1945
1946 if (debug_level >= DEBUG_LEVEL_INFO)
1947 printk("hdlcdev_rx(%s)\n",dev->name);
1948
1949 if (skb == NULL) {
1950 printk(KERN_NOTICE "%s: can't alloc skb, dropping packet\n", dev->name);
1951 stats->rx_dropped++;
1952 return;
1953 }
1954
1955 memcpy(skb_put(skb, size),buf,size);
1956
1957 skb->protocol = hdlc_type_trans(skb, info->netdev);
1958
1959 stats->rx_packets++;
1960 stats->rx_bytes += size;
1961
1962 netif_rx(skb);
1963
1964 info->netdev->last_rx = jiffies;
1965 }
1966
1967 /**
1968 * called by device driver when adding device instance
1969 * do generic HDLC initialization
1970 *
1971 * info pointer to device instance information
1972 *
1973 * returns 0 if success, otherwise error code
1974 */
1975 static int hdlcdev_init(SLMP_INFO *info)
1976 {
1977 int rc;
1978 struct net_device *dev;
1979 hdlc_device *hdlc;
1980
1981 /* allocate and initialize network and HDLC layer objects */
1982
1983 if (!(dev = alloc_hdlcdev(info))) {
1984 printk(KERN_ERR "%s:hdlc device allocation failure\n",__FILE__);
1985 return -ENOMEM;
1986 }
1987
1988 /* for network layer reporting purposes only */
1989 dev->mem_start = info->phys_sca_base;
1990 dev->mem_end = info->phys_sca_base + SCA_BASE_SIZE - 1;
1991 dev->irq = info->irq_level;
1992
1993 /* network layer callbacks and settings */
1994 dev->do_ioctl = hdlcdev_ioctl;
1995 dev->open = hdlcdev_open;
1996 dev->stop = hdlcdev_close;
1997 dev->tx_timeout = hdlcdev_tx_timeout;
1998 dev->watchdog_timeo = 10*HZ;
1999 dev->tx_queue_len = 50;
2000
2001 /* generic HDLC layer callbacks and settings */
2002 hdlc = dev_to_hdlc(dev);
2003 hdlc->attach = hdlcdev_attach;
2004 hdlc->xmit = hdlcdev_xmit;
2005
2006 /* register objects with HDLC layer */
2007 if ((rc = register_hdlc_device(dev))) {
2008 printk(KERN_WARNING "%s:unable to register hdlc device\n",__FILE__);
2009 free_netdev(dev);
2010 return rc;
2011 }
2012
2013 info->netdev = dev;
2014 return 0;
2015 }
2016
2017 /**
2018 * called by device driver when removing device instance
2019 * do generic HDLC cleanup
2020 *
2021 * info pointer to device instance information
2022 */
2023 static void hdlcdev_exit(SLMP_INFO *info)
2024 {
2025 unregister_hdlc_device(info->netdev);
2026 free_netdev(info->netdev);
2027 info->netdev = NULL;
2028 }
2029
2030 #endif /* CONFIG_HDLC */
2031
2032
2033 /* Return next bottom half action to perform.
2034 * Return Value: BH action code or 0 if nothing to do.
2035 */
2036 int bh_action(SLMP_INFO *info)
2037 {
2038 unsigned long flags;
2039 int rc = 0;
2040
2041 spin_lock_irqsave(&info->lock,flags);
2042
2043 if (info->pending_bh & BH_RECEIVE) {
2044 info->pending_bh &= ~BH_RECEIVE;
2045 rc = BH_RECEIVE;
2046 } else if (info->pending_bh & BH_TRANSMIT) {
2047 info->pending_bh &= ~BH_TRANSMIT;
2048 rc = BH_TRANSMIT;
2049 } else if (info->pending_bh & BH_STATUS) {
2050 info->pending_bh &= ~BH_STATUS;
2051 rc = BH_STATUS;
2052 }
2053
2054 if (!rc) {
2055 /* Mark BH routine as complete */
2056 info->bh_running = 0;
2057 info->bh_requested = 0;
2058 }
2059
2060 spin_unlock_irqrestore(&info->lock,flags);
2061
2062 return rc;
2063 }
2064
2065 /* Perform bottom half processing of work items queued by ISR.
2066 */
2067 void bh_handler(void* Context)
2068 {
2069 SLMP_INFO *info = (SLMP_INFO*)Context;
2070 int action;
2071
2072 if (!info)
2073 return;
2074
2075 if ( debug_level >= DEBUG_LEVEL_BH )
2076 printk( "%s(%d):%s bh_handler() entry\n",
2077 __FILE__,__LINE__,info->device_name);
2078
2079 info->bh_running = 1;
2080
2081 while((action = bh_action(info)) != 0) {
2082
2083 /* Process work item */
2084 if ( debug_level >= DEBUG_LEVEL_BH )
2085 printk( "%s(%d):%s bh_handler() work item action=%d\n",
2086 __FILE__,__LINE__,info->device_name, action);
2087
2088 switch (action) {
2089
2090 case BH_RECEIVE:
2091 bh_receive(info);
2092 break;
2093 case BH_TRANSMIT:
2094 bh_transmit(info);
2095 break;
2096 case BH_STATUS:
2097 bh_status(info);
2098 break;
2099 default:
2100 /* unknown work item ID */
2101 printk("%s(%d):%s Unknown work item ID=%08X!\n",
2102 __FILE__,__LINE__,info->device_name,action);
2103 break;
2104 }
2105 }
2106
2107 if ( debug_level >= DEBUG_LEVEL_BH )
2108 printk( "%s(%d):%s bh_handler() exit\n",
2109 __FILE__,__LINE__,info->device_name);
2110 }
2111
2112 void bh_receive(SLMP_INFO *info)
2113 {
2114 if ( debug_level >= DEBUG_LEVEL_BH )
2115 printk( "%s(%d):%s bh_receive()\n",
2116 __FILE__,__LINE__,info->device_name);
2117
2118 while( rx_get_frame(info) );
2119 }
2120
2121 void bh_transmit(SLMP_INFO *info)
2122 {
2123 struct tty_struct *tty = info->tty;
2124
2125 if ( debug_level >= DEBUG_LEVEL_BH )
2126 printk( "%s(%d):%s bh_transmit() entry\n",
2127 __FILE__,__LINE__,info->device_name);
2128
2129 if (tty) {
2130 tty_wakeup(tty);
2131 wake_up_interruptible(&tty->write_wait);
2132 }
2133 }
2134
2135 void bh_status(SLMP_INFO *info)
2136 {
2137 if ( debug_level >= DEBUG_LEVEL_BH )
2138 printk( "%s(%d):%s bh_status() entry\n",
2139 __FILE__,__LINE__,info->device_name);
2140
2141 info->ri_chkcount = 0;
2142 info->dsr_chkcount = 0;
2143 info->dcd_chkcount = 0;
2144 info->cts_chkcount = 0;
2145 }
2146
2147 void isr_timer(SLMP_INFO * info)
2148 {
2149 unsigned char timer = (info->port_num & 1) ? TIMER2 : TIMER0;
2150
2151 /* IER2<7..4> = timer<3..0> interrupt enables (0=disabled) */
2152 write_reg(info, IER2, 0);
2153
2154 /* TMCS, Timer Control/Status Register
2155 *
2156 * 07 CMF, Compare match flag (read only) 1=match
2157 * 06 ECMI, CMF Interrupt Enable: 0=disabled
2158 * 05 Reserved, must be 0
2159 * 04 TME, Timer Enable
2160 * 03..00 Reserved, must be 0
2161 *
2162 * 0000 0000
2163 */
2164 write_reg(info, (unsigned char)(timer + TMCS), 0);
2165
2166 info->irq_occurred = TRUE;
2167
2168 if ( debug_level >= DEBUG_LEVEL_ISR )
2169 printk("%s(%d):%s isr_timer()\n",
2170 __FILE__,__LINE__,info->device_name);
2171 }
2172
2173 void isr_rxint(SLMP_INFO * info)
2174 {
2175 struct tty_struct *tty = info->tty;
2176 struct mgsl_icount *icount = &info->icount;
2177 unsigned char status = read_reg(info, SR1) & info->ie1_value & (FLGD + IDLD + CDCD + BRKD);
2178 unsigned char status2 = read_reg(info, SR2) & info->ie2_value & OVRN;
2179
2180 /* clear status bits */
2181 if (status)
2182 write_reg(info, SR1, status);
2183
2184 if (status2)
2185 write_reg(info, SR2, status2);
2186
2187 if ( debug_level >= DEBUG_LEVEL_ISR )
2188 printk("%s(%d):%s isr_rxint status=%02X %02x\n",
2189 __FILE__,__LINE__,info->device_name,status,status2);
2190
2191 if (info->params.mode == MGSL_MODE_ASYNC) {
2192 if (status & BRKD) {
2193 icount->brk++;
2194
2195 /* process break detection if tty control
2196 * is not set to ignore it
2197 */
2198 if ( tty ) {
2199 if (!(status & info->ignore_status_mask1)) {
2200 if (info->read_status_mask1 & BRKD) {
2201 *tty->flip.flag_buf_ptr = TTY_BREAK;
2202 if (info->flags & ASYNC_SAK)
2203 do_SAK(tty);
2204 }
2205 }
2206 }
2207 }
2208 }
2209 else {
2210 if (status & (FLGD|IDLD)) {
2211 if (status & FLGD)
2212 info->icount.exithunt++;
2213 else if (status & IDLD)
2214 info->icount.rxidle++;
2215 wake_up_interruptible(&info->event_wait_q);
2216 }
2217 }
2218
2219 if (status & CDCD) {
2220 /* simulate a common modem status change interrupt
2221 * for our handler
2222 */
2223 get_signals( info );
2224 isr_io_pin(info,
2225 MISCSTATUS_DCD_LATCHED|(info->serial_signals&SerialSignal_DCD));
2226 }
2227 }
2228
2229 /*
2230 * handle async rx data interrupts
2231 */
2232 void isr_rxrdy(SLMP_INFO * info)
2233 {
2234 u16 status;
2235 unsigned char DataByte;
2236 struct tty_struct *tty = info->tty;
2237 struct mgsl_icount *icount = &info->icount;
2238
2239 if ( debug_level >= DEBUG_LEVEL_ISR )
2240 printk("%s(%d):%s isr_rxrdy\n",
2241 __FILE__,__LINE__,info->device_name);
2242
2243 while((status = read_reg(info,CST0)) & BIT0)
2244 {
2245 DataByte = read_reg(info,TRB);
2246
2247 if ( tty ) {
2248 if (tty->flip.count >= TTY_FLIPBUF_SIZE)
2249 continue;
2250
2251 *tty->flip.char_buf_ptr = DataByte;
2252 *tty->flip.flag_buf_ptr = 0;
2253 }
2254
2255 icount->rx++;
2256
2257 if ( status & (PE + FRME + OVRN) ) {
2258 printk("%s(%d):%s rxerr=%04X\n",
2259 __FILE__,__LINE__,info->device_name,status);
2260
2261 /* update error statistics */
2262 if (status & PE)
2263 icount->parity++;
2264 else if (status & FRME)
2265 icount->frame++;
2266 else if (status & OVRN)
2267 icount->overrun++;
2268
2269 /* discard char if tty control flags say so */
2270 if (status & info->ignore_status_mask2)
2271 continue;
2272
2273 status &= info->read_status_mask2;
2274
2275 if ( tty ) {
2276 if (status & PE)
2277 *tty->flip.flag_buf_ptr = TTY_PARITY;
2278 else if (status & FRME)
2279 *tty->flip.flag_buf_ptr = TTY_FRAME;
2280 if (status & OVRN) {
2281 /* Overrun is special, since it's
2282 * reported immediately, and doesn't
2283 * affect the current character
2284 */
2285 if (tty->flip.count < TTY_FLIPBUF_SIZE) {
2286 tty->flip.count++;
2287 tty->flip.flag_buf_ptr++;
2288 tty->flip.char_buf_ptr++;
2289 *tty->flip.flag_buf_ptr = TTY_OVERRUN;
2290 }
2291 }
2292 }
2293 } /* end of if (error) */
2294
2295 if ( tty ) {
2296 tty->flip.flag_buf_ptr++;
2297 tty->flip.char_buf_ptr++;
2298 tty->flip.count++;
2299 }
2300 }
2301
2302 if ( debug_level >= DEBUG_LEVEL_ISR ) {
2303 printk("%s(%d):%s isr_rxrdy() flip count=%d\n",
2304 __FILE__,__LINE__,info->device_name,
2305 tty ? tty->flip.count : 0);
2306 printk("%s(%d):%s rx=%d brk=%d parity=%d frame=%d overrun=%d\n",
2307 __FILE__,__LINE__,info->device_name,
2308 icount->rx,icount->brk,icount->parity,
2309 icount->frame,icount->overrun);
2310 }
2311
2312 if ( tty && tty->flip.count )
2313 tty_flip_buffer_push(tty);
2314 }
2315
2316 static void isr_txeom(SLMP_INFO * info, unsigned char status)
2317 {
2318 if ( debug_level >= DEBUG_LEVEL_ISR )
2319 printk("%s(%d):%s isr_txeom status=%02x\n",
2320 __FILE__,__LINE__,info->device_name,status);
2321
2322 write_reg(info, TXDMA + DIR, 0x00); /* disable Tx DMA IRQs */
2323 write_reg(info, TXDMA + DSR, 0xc0); /* clear IRQs and disable DMA */
2324 write_reg(info, TXDMA + DCMD, SWABORT); /* reset/init DMA channel */
2325
2326 if (status & UDRN) {
2327 write_reg(info, CMD, TXRESET);
2328 write_reg(info, CMD, TXENABLE);
2329 } else
2330 write_reg(info, CMD, TXBUFCLR);
2331
2332 /* disable and clear tx interrupts */
2333 info->ie0_value &= ~TXRDYE;
2334 info->ie1_value &= ~(IDLE + UDRN);
2335 write_reg16(info, IE0, (unsigned short)((info->ie1_value << 8) + info->ie0_value));
2336 write_reg(info, SR1, (unsigned char)(UDRN + IDLE));
2337
2338 if ( info->tx_active ) {
2339 if (info->params.mode != MGSL_MODE_ASYNC) {
2340 if (status & UDRN)
2341 info->icount.txunder++;
2342 else if (status & IDLE)
2343 info->icount.txok++;
2344 }
2345
2346 info->tx_active = 0;
2347 info->tx_count = info->tx_put = info->tx_get = 0;
2348
2349 del_timer(&info->tx_timer);
2350
2351 if (info->params.mode != MGSL_MODE_ASYNC && info->drop_rts_on_tx_done ) {
2352 info->serial_signals &= ~SerialSignal_RTS;
2353 info->drop_rts_on_tx_done = 0;
2354 set_signals(info);
2355 }
2356
2357 #ifdef CONFIG_HDLC
2358 if (info->netcount)
2359 hdlcdev_tx_done(info);
2360 else
2361 #endif
2362 {
2363 if (info->tty && (info->tty->stopped || info->tty->hw_stopped)) {
2364 tx_stop(info);
2365 return;
2366 }
2367 info->pending_bh |= BH_TRANSMIT;
2368 }
2369 }
2370 }
2371
2372
2373 /*
2374 * handle tx status interrupts
2375 */
2376 void isr_txint(SLMP_INFO * info)
2377 {
2378 unsigned char status = read_reg(info, SR1) & info->ie1_value & (UDRN + IDLE + CCTS);
2379
2380 /* clear status bits */
2381 write_reg(info, SR1, status);
2382
2383 if ( debug_level >= DEBUG_LEVEL_ISR )
2384 printk("%s(%d):%s isr_txint status=%02x\n",
2385 __FILE__,__LINE__,info->device_name,status);
2386
2387 if (status & (UDRN + IDLE))
2388 isr_txeom(info, status);
2389
2390 if (status & CCTS) {
2391 /* simulate a common modem status change interrupt
2392 * for our handler
2393 */
2394 get_signals( info );
2395 isr_io_pin(info,
2396 MISCSTATUS_CTS_LATCHED|(info->serial_signals&SerialSignal_CTS));
2397
2398 }
2399 }
2400
2401 /*
2402 * handle async tx data interrupts
2403 */
2404 void isr_txrdy(SLMP_INFO * info)
2405 {
2406 if ( debug_level >= DEBUG_LEVEL_ISR )
2407 printk("%s(%d):%s isr_txrdy() tx_count=%d\n",
2408 __FILE__,__LINE__,info->device_name,info->tx_count);
2409
2410 if (info->params.mode != MGSL_MODE_ASYNC) {
2411 /* disable TXRDY IRQ, enable IDLE IRQ */
2412 info->ie0_value &= ~TXRDYE;
2413 info->ie1_value |= IDLE;
2414 write_reg16(info, IE0, (unsigned short)((info->ie1_value << 8) + info->ie0_value));
2415 return;
2416 }
2417
2418 if (info->tty && (info->tty->stopped || info->tty->hw_stopped)) {
2419 tx_stop(info);
2420 return;
2421 }
2422
2423 if ( info->tx_count )
2424 tx_load_fifo( info );
2425 else {
2426 info->tx_active = 0;
2427 info->ie0_value &= ~TXRDYE;
2428 write_reg(info, IE0, info->ie0_value);
2429 }
2430
2431 if (info->tx_count < WAKEUP_CHARS)
2432 info->pending_bh |= BH_TRANSMIT;
2433 }
2434
2435 void isr_rxdmaok(SLMP_INFO * info)
2436 {
2437 /* BIT7 = EOT (end of transfer)
2438 * BIT6 = EOM (end of message/frame)
2439 */
2440 unsigned char status = read_reg(info,RXDMA + DSR) & 0xc0;
2441
2442 /* clear IRQ (BIT0 must be 1 to prevent clearing DE bit) */
2443 write_reg(info, RXDMA + DSR, (unsigned char)(status | 1));
2444
2445 if ( debug_level >= DEBUG_LEVEL_ISR )
2446 printk("%s(%d):%s isr_rxdmaok(), status=%02x\n",
2447 __FILE__,__LINE__,info->device_name,status);
2448
2449 info->pending_bh |= BH_RECEIVE;
2450 }
2451
2452 void isr_rxdmaerror(SLMP_INFO * info)
2453 {
2454 /* BIT5 = BOF (buffer overflow)
2455 * BIT4 = COF (counter overflow)
2456 */
2457 unsigned char status = read_reg(info,RXDMA + DSR) & 0x30;
2458
2459 /* clear IRQ (BIT0 must be 1 to prevent clearing DE bit) */
2460 write_reg(info, RXDMA + DSR, (unsigned char)(status | 1));
2461
2462 if ( debug_level >= DEBUG_LEVEL_ISR )
2463 printk("%s(%d):%s isr_rxdmaerror(), status=%02x\n",
2464 __FILE__,__LINE__,info->device_name,status);
2465
2466 info->rx_overflow = TRUE;
2467 info->pending_bh |= BH_RECEIVE;
2468 }
2469
2470 void isr_txdmaok(SLMP_INFO * info)
2471 {
2472 unsigned char status_reg1 = read_reg(info, SR1);
2473
2474 write_reg(info, TXDMA + DIR, 0x00); /* disable Tx DMA IRQs */
2475 write_reg(info, TXDMA + DSR, 0xc0); /* clear IRQs and disable DMA */
2476 write_reg(info, TXDMA + DCMD, SWABORT); /* reset/init DMA channel */
2477
2478 if ( debug_level >= DEBUG_LEVEL_ISR )
2479 printk("%s(%d):%s isr_txdmaok(), status=%02x\n",
2480 __FILE__,__LINE__,info->device_name,status_reg1);
2481
2482 /* program TXRDY as FIFO empty flag, enable TXRDY IRQ */
2483 write_reg16(info, TRC0, 0);
2484 info->ie0_value |= TXRDYE;
2485 write_reg(info, IE0, info->ie0_value);
2486 }
2487
2488 void isr_txdmaerror(SLMP_INFO * info)
2489 {
2490 /* BIT5 = BOF (buffer overflow)
2491 * BIT4 = COF (counter overflow)
2492 */
2493 unsigned char status = read_reg(info,TXDMA + DSR) & 0x30;
2494
2495 /* clear IRQ (BIT0 must be 1 to prevent clearing DE bit) */
2496 write_reg(info, TXDMA + DSR, (unsigned char)(status | 1));
2497
2498 if ( debug_level >= DEBUG_LEVEL_ISR )
2499 printk("%s(%d):%s isr_txdmaerror(), status=%02x\n",
2500 __FILE__,__LINE__,info->device_name,status);
2501 }
2502
2503 /* handle input serial signal changes
2504 */
2505 void isr_io_pin( SLMP_INFO *info, u16 status )
2506 {
2507 struct mgsl_icount *icount;
2508
2509 if ( debug_level >= DEBUG_LEVEL_ISR )
2510 printk("%s(%d):isr_io_pin status=%04X\n",
2511 __FILE__,__LINE__,status);
2512
2513 if (status & (MISCSTATUS_CTS_LATCHED | MISCSTATUS_DCD_LATCHED |
2514 MISCSTATUS_DSR_LATCHED | MISCSTATUS_RI_LATCHED) ) {
2515 icount = &info->icount;
2516 /* update input line counters */
2517 if (status & MISCSTATUS_RI_LATCHED) {
2518 icount->rng++;
2519 if ( status & SerialSignal_RI )
2520 info->input_signal_events.ri_up++;
2521 else
2522 info->input_signal_events.ri_down++;
2523 }
2524 if (status & MISCSTATUS_DSR_LATCHED) {
2525 icount->dsr++;
2526 if ( status & SerialSignal_DSR )
2527 info->input_signal_events.dsr_up++;
2528 else
2529 info->input_signal_events.dsr_down++;
2530 }
2531 if (status & MISCSTATUS_DCD_LATCHED) {
2532 if ((info->dcd_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT) {
2533 info->ie1_value &= ~CDCD;
2534 write_reg(info, IE1, info->ie1_value);
2535 }
2536 icount->dcd++;
2537 if (status & SerialSignal_DCD) {
2538 info->input_signal_events.dcd_up++;
2539 } else
2540 info->input_signal_events.dcd_down++;
2541 #ifdef CONFIG_HDLC
2542 if (info->netcount)
2543 hdlc_set_carrier(status & SerialSignal_DCD, info->netdev);
2544 #endif
2545 }
2546 if (status & MISCSTATUS_CTS_LATCHED)
2547 {
2548 if ((info->cts_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT) {
2549 info->ie1_value &= ~CCTS;
2550 write_reg(info, IE1, info->ie1_value);
2551 }
2552 icount->cts++;
2553 if ( status & SerialSignal_CTS )
2554 info->input_signal_events.cts_up++;
2555 else
2556 info->input_signal_events.cts_down++;
2557 }
2558 wake_up_interruptible(&info->status_event_wait_q);
2559 wake_up_interruptible(&info->event_wait_q);
2560
2561 if ( (info->flags & ASYNC_CHECK_CD) &&
2562 (status & MISCSTATUS_DCD_LATCHED) ) {
2563 if ( debug_level >= DEBUG_LEVEL_ISR )
2564 printk("%s CD now %s...", info->device_name,
2565 (status & SerialSignal_DCD) ? "on" : "off");
2566 if (status & SerialSignal_DCD)
2567 wake_up_interruptible(&info->open_wait);
2568 else {
2569 if ( debug_level >= DEBUG_LEVEL_ISR )
2570 printk("doing serial hangup...");
2571 if (info->tty)
2572 tty_hangup(info->tty);
2573 }
2574 }
2575
2576 if ( (info->flags & ASYNC_CTS_FLOW) &&
2577 (status & MISCSTATUS_CTS_LATCHED) ) {
2578 if ( info->tty ) {
2579 if (info->tty->hw_stopped) {
2580 if (status & SerialSignal_CTS) {
2581 if ( debug_level >= DEBUG_LEVEL_ISR )
2582 printk("CTS tx start...");
2583 info->tty->hw_stopped = 0;
2584 tx_start(info);
2585 info->pending_bh |= BH_TRANSMIT;
2586 return;
2587 }
2588 } else {
2589 if (!(status & SerialSignal_CTS)) {
2590 if ( debug_level >= DEBUG_LEVEL_ISR )
2591 printk("CTS tx stop...");
2592 info->tty->hw_stopped = 1;
2593 tx_stop(info);
2594 }
2595 }
2596 }
2597 }
2598 }
2599
2600 info->pending_bh |= BH_STATUS;
2601 }
2602
2603 /* Interrupt service routine entry point.
2604 *
2605 * Arguments:
2606 * irq interrupt number that caused interrupt
2607 * dev_id device ID supplied during interrupt registration
2608 * regs interrupted processor context
2609 */
2610 static irqreturn_t synclinkmp_interrupt(int irq, void *dev_id,
2611 struct pt_regs *regs)
2612 {
2613 SLMP_INFO * info;
2614 unsigned char status, status0, status1=0;
2615 unsigned char dmastatus, dmastatus0, dmastatus1=0;
2616 unsigned char timerstatus0, timerstatus1=0;
2617 unsigned char shift;
2618 unsigned int i;
2619 unsigned short tmp;
2620
2621 if ( debug_level >= DEBUG_LEVEL_ISR )
2622 printk("%s(%d): synclinkmp_interrupt(%d)entry.\n",
2623 __FILE__,__LINE__,irq);
2624
2625 info = (SLMP_INFO *)dev_id;
2626 if (!info)
2627 return IRQ_NONE;
2628
2629 spin_lock(&info->lock);
2630
2631 for(;;) {
2632
2633 /* get status for SCA0 (ports 0-1) */
2634 tmp = read_reg16(info, ISR0); /* get ISR0 and ISR1 in one read */
2635 status0 = (unsigned char)tmp;
2636 dmastatus0 = (unsigned char)(tmp>>8);
2637 timerstatus0 = read_reg(info, ISR2);
2638
2639 if ( debug_level >= DEBUG_LEVEL_ISR )
2640 printk("%s(%d):%s status0=%02x, dmastatus0=%02x, timerstatus0=%02x\n",
2641 __FILE__,__LINE__,info->device_name,
2642 status0,dmastatus0,timerstatus0);
2643
2644 if (info->port_count == 4) {
2645 /* get status for SCA1 (ports 2-3) */
2646 tmp = read_reg16(info->port_array[2], ISR0);
2647 status1 = (unsigned char)tmp;
2648 dmastatus1 = (unsigned char)(tmp>>8);
2649 timerstatus1 = read_reg(info->port_array[2], ISR2);
2650
2651 if ( debug_level >= DEBUG_LEVEL_ISR )
2652 printk("%s(%d):%s status1=%02x, dmastatus1=%02x, timerstatus1=%02x\n",
2653 __FILE__,__LINE__,info->device_name,
2654 status1,dmastatus1,timerstatus1);
2655 }
2656
2657 if (!status0 && !dmastatus0 && !timerstatus0 &&
2658 !status1 && !dmastatus1 && !timerstatus1)
2659 break;
2660
2661 for(i=0; i < info->port_count ; i++) {
2662 if (info->port_array[i] == NULL)
2663 continue;
2664 if (i < 2) {
2665 status = status0;
2666 dmastatus = dmastatus0;
2667 } else {
2668 status = status1;
2669 dmastatus = dmastatus1;
2670 }
2671
2672 shift = i & 1 ? 4 :0;
2673
2674 if (status & BIT0 << shift)
2675 isr_rxrdy(info->port_array[i]);
2676 if (status & BIT1 << shift)
2677 isr_txrdy(info->port_array[i]);
2678 if (status & BIT2 << shift)
2679 isr_rxint(info->port_array[i]);
2680 if (status & BIT3 << shift)
2681 isr_txint(info->port_array[i]);
2682
2683 if (dmastatus & BIT0 << shift)
2684 isr_rxdmaerror(info->port_array[i]);
2685 if (dmastatus & BIT1 << shift)
2686 isr_rxdmaok(info->port_array[i]);
2687 if (dmastatus & BIT2 << shift)
2688 isr_txdmaerror(info->port_array[i]);
2689 if (dmastatus & BIT3 << shift)
2690 isr_txdmaok(info->port_array[i]);
2691 }
2692
2693 if (timerstatus0 & (BIT5 | BIT4))
2694 isr_timer(info->port_array[0]);
2695 if (timerstatus0 & (BIT7 | BIT6))
2696 isr_timer(info->port_array[1]);
2697 if (timerstatus1 & (BIT5 | BIT4))
2698 isr_timer(info->port_array[2]);
2699 if (timerstatus1 & (BIT7 | BIT6))
2700 isr_timer(info->port_array[3]);
2701 }
2702
2703 for(i=0; i < info->port_count ; i++) {
2704 SLMP_INFO * port = info->port_array[i];
2705
2706 /* Request bottom half processing if there's something
2707 * for it to do and the bh is not already running.
2708 *
2709 * Note: startup adapter diags require interrupts.
2710 * do not request bottom half processing if the
2711 * device is not open in a normal mode.
2712 */
2713 if ( port && (port->count || port->netcount) &&
2714 port->pending_bh && !port->bh_running &&
2715 !port->bh_requested ) {
2716 if ( debug_level >= DEBUG_LEVEL_ISR )
2717 printk("%s(%d):%s queueing bh task.\n",
2718 __FILE__,__LINE__,port->device_name);
2719 schedule_work(&port->task);
2720 port->bh_requested = 1;
2721 }
2722 }
2723
2724 spin_unlock(&info->lock);
2725
2726 if ( debug_level >= DEBUG_LEVEL_ISR )
2727 printk("%s(%d):synclinkmp_interrupt(%d)exit.\n",
2728 __FILE__,__LINE__,irq);
2729 return IRQ_HANDLED;
2730 }
2731
2732 /* Initialize and start device.
2733 */
2734 static int startup(SLMP_INFO * info)
2735 {
2736 if ( debug_level >= DEBUG_LEVEL_INFO )
2737 printk("%s(%d):%s tx_releaseup()\n",__FILE__,__LINE__,info->device_name);
2738
2739 if (info->flags & ASYNC_INITIALIZED)
2740 return 0;
2741
2742 if (!info->tx_buf) {
2743 info->tx_buf = (unsigned char *)kmalloc(info->max_frame_size, GFP_KERNEL);
2744 if (!info->tx_buf) {
2745 printk(KERN_ERR"%s(%d):%s can't allocate transmit buffer\n",
2746 __FILE__,__LINE__,info->device_name);
2747 return -ENOMEM;
2748 }
2749 }
2750
2751 info->pending_bh = 0;
2752
2753 /* program hardware for current parameters */
2754 reset_port(info);
2755
2756 change_params(info);
2757
2758 info->status_timer.expires = jiffies + msecs_to_jiffies(10);
2759 add_timer(&info->status_timer);
2760
2761 if (info->tty)
2762 clear_bit(TTY_IO_ERROR, &info->tty->flags);
2763
2764 info->flags |= ASYNC_INITIALIZED;
2765
2766 return 0;
2767 }
2768
2769 /* Called by close() and hangup() to shutdown hardware
2770 */
2771 static void shutdown(SLMP_INFO * info)
2772 {
2773 unsigned long flags;
2774
2775 if (!(info->flags & ASYNC_INITIALIZED))
2776 return;
2777
2778 if (debug_level >= DEBUG_LEVEL_INFO)
2779 printk("%s(%d):%s synclinkmp_shutdown()\n",
2780 __FILE__,__LINE__, info->device_name );
2781
2782 /* clear status wait queue because status changes */
2783 /* can't happen after shutting down the hardware */
2784 wake_up_interruptible(&info->status_event_wait_q);
2785 wake_up_interruptible(&info->event_wait_q);
2786
2787 del_timer(&info->tx_timer);
2788 del_timer(&info->status_timer);
2789
2790 if (info->tx_buf) {
2791 kfree(info->tx_buf);
2792 info->tx_buf = NULL;
2793 }
2794
2795 spin_lock_irqsave(&info->lock,flags);
2796
2797 reset_port(info);
2798
2799 if (!info->tty || info->tty->termios->c_cflag & HUPCL) {
2800 info->serial_signals &= ~(SerialSignal_DTR + SerialSignal_RTS);
2801 set_signals(info);
2802 }
2803
2804 spin_unlock_irqrestore(&info->lock,flags);
2805
2806 if (info->tty)
2807 set_bit(TTY_IO_ERROR, &info->tty->flags);
2808
2809 info->flags &= ~ASYNC_INITIALIZED;
2810 }
2811
2812 static void program_hw(SLMP_INFO *info)
2813 {
2814 unsigned long flags;
2815
2816 spin_lock_irqsave(&info->lock,flags);
2817
2818 rx_stop(info);
2819 tx_stop(info);
2820
2821 info->tx_count = info->tx_put = info->tx_get = 0;
2822
2823 if (info->params.mode == MGSL_MODE_HDLC || info->netcount)
2824 hdlc_mode(info);
2825 else
2826 async_mode(info);
2827
2828 set_signals(info);
2829
2830 info->dcd_chkcount = 0;
2831 info->cts_chkcount = 0;
2832 info->ri_chkcount = 0;
2833 info->dsr_chkcount = 0;
2834
2835 info->ie1_value |= (CDCD|CCTS);
2836 write_reg(info, IE1, info->ie1_value);
2837
2838 get_signals(info);
2839
2840 if (info->netcount || (info->tty && info->tty->termios->c_cflag & CREAD) )
2841 rx_start(info);
2842
2843 spin_unlock_irqrestore(&info->lock,flags);
2844 }
2845
2846 /* Reconfigure adapter based on new parameters
2847 */
2848 static void change_params(SLMP_INFO *info)
2849 {
2850 unsigned cflag;
2851 int bits_per_char;
2852
2853 if (!info->tty || !info->tty->termios)
2854 return;
2855
2856 if (debug_level >= DEBUG_LEVEL_INFO)
2857 printk("%s(%d):%s change_params()\n",
2858 __FILE__,__LINE__, info->device_name );
2859
2860 cflag = info->tty->termios->c_cflag;
2861
2862 /* if B0 rate (hangup) specified then negate DTR and RTS */
2863 /* otherwise assert DTR and RTS */
2864 if (cflag & CBAUD)
2865 info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR;
2866 else
2867 info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
2868
2869 /* byte size and parity */
2870
2871 switch (cflag & CSIZE) {
2872 case CS5: info->params.data_bits = 5; break;
2873 case CS6: info->params.data_bits = 6; break;
2874 case CS7: info->params.data_bits = 7; break;
2875 case CS8: info->params.data_bits = 8; break;
2876 /* Never happens, but GCC is too dumb to figure it out */
2877 default: info->params.data_bits = 7; break;
2878 }
2879
2880 if (cflag & CSTOPB)
2881 info->params.stop_bits = 2;
2882 else
2883 info->params.stop_bits = 1;
2884
2885 info->params.parity = ASYNC_PARITY_NONE;
2886 if (cflag & PARENB) {
2887 if (cflag & PARODD)
2888 info->params.parity = ASYNC_PARITY_ODD;
2889 else
2890 info->params.parity = ASYNC_PARITY_EVEN;
2891 #ifdef CMSPAR
2892 if (cflag & CMSPAR)
2893 info->params.parity = ASYNC_PARITY_SPACE;
2894 #endif
2895 }
2896
2897 /* calculate number of jiffies to transmit a full
2898 * FIFO (32 bytes) at specified data rate
2899 */
2900 bits_per_char = info->params.data_bits +
2901 info->params.stop_bits + 1;
2902
2903 /* if port data rate is set to 460800 or less then
2904 * allow tty settings to override, otherwise keep the
2905 * current data rate.
2906 */
2907 if (info->params.data_rate <= 460800) {
2908 info->params.data_rate = tty_get_baud_rate(info->tty);
2909 }
2910
2911 if ( info->params.data_rate ) {
2912 info->timeout = (32*HZ*bits_per_char) /
2913 info->params.data_rate;
2914 }
2915 info->timeout += HZ/50; /* Add .02 seconds of slop */
2916
2917 if (cflag & CRTSCTS)
2918 info->flags |= ASYNC_CTS_FLOW;
2919 else
2920 info->flags &= ~ASYNC_CTS_FLOW;
2921
2922 if (cflag & CLOCAL)
2923 info->flags &= ~ASYNC_CHECK_CD;
2924 else
2925 info->flags |= ASYNC_CHECK_CD;
2926
2927 /* process tty input control flags */
2928
2929 info->read_status_mask2 = OVRN;
2930 if (I_INPCK(info->tty))
2931 info->read_status_mask2 |= PE | FRME;
2932 if (I_BRKINT(info->tty) || I_PARMRK(info->tty))
2933 info->read_status_mask1 |= BRKD;
2934 if (I_IGNPAR(info->tty))
2935 info->ignore_status_mask2 |= PE | FRME;
2936 if (I_IGNBRK(info->tty)) {
2937 info->ignore_status_mask1 |= BRKD;
2938 /* If ignoring parity and break indicators, ignore
2939 * overruns too. (For real raw support).
2940 */
2941 if (I_IGNPAR(info->tty))
2942 info->ignore_status_mask2 |= OVRN;
2943 }
2944
2945 program_hw(info);
2946 }
2947
2948 static int get_stats(SLMP_INFO * info, struct mgsl_icount __user *user_icount)
2949 {
2950 int err;
2951
2952 if (debug_level >= DEBUG_LEVEL_INFO)
2953 printk("%s(%d):%s get_params()\n",
2954 __FILE__,__LINE__, info->device_name);
2955
2956 COPY_TO_USER(err,user_icount, &info->icount, sizeof(struct mgsl_icount));
2957 if (err) {
2958 if ( debug_level >= DEBUG_LEVEL_INFO )
2959 printk( "%s(%d):%s get_stats() user buffer copy failed\n",
2960 __FILE__,__LINE__,info->device_name);
2961 return -EFAULT;
2962 }
2963
2964 return 0;
2965 }
2966
2967 static int get_params(SLMP_INFO * info, MGSL_PARAMS __user *user_params)
2968 {
2969 int err;
2970 if (debug_level >= DEBUG_LEVEL_INFO)
2971 printk("%s(%d):%s get_params()\n",
2972 __FILE__,__LINE__, info->device_name);
2973
2974 COPY_TO_USER(err,user_params, &info->params, sizeof(MGSL_PARAMS));
2975 if (err) {
2976 if ( debug_level >= DEBUG_LEVEL_INFO )
2977 printk( "%s(%d):%s get_params() user buffer copy failed\n",
2978 __FILE__,__LINE__,info->device_name);
2979 return -EFAULT;
2980 }
2981
2982 return 0;
2983 }
2984
2985 static int set_params(SLMP_INFO * info, MGSL_PARAMS __user *new_params)
2986 {
2987 unsigned long flags;
2988 MGSL_PARAMS tmp_params;
2989 int err;
2990
2991 if (debug_level >= DEBUG_LEVEL_INFO)
2992 printk("%s(%d):%s set_params\n",
2993 __FILE__,__LINE__,info->device_name );
2994 COPY_FROM_USER(err,&tmp_params, new_params, sizeof(MGSL_PARAMS));
2995 if (err) {
2996 if ( debug_level >= DEBUG_LEVEL_INFO )
2997 printk( "%s(%d):%s set_params() user buffer copy failed\n",
2998 __FILE__,__LINE__,info->device_name);
2999 return -EFAULT;
3000 }
3001
3002 spin_lock_irqsave(&info->lock,flags);
3003 memcpy(&info->params,&tmp_params,sizeof(MGSL_PARAMS));
3004 spin_unlock_irqrestore(&info->lock,flags);
3005
3006 change_params(info);
3007
3008 return 0;
3009 }
3010
3011 static int get_txidle(SLMP_INFO * info, int __user *idle_mode)
3012 {
3013 int err;
3014
3015 if (debug_level >= DEBUG_LEVEL_INFO)
3016 printk("%s(%d):%s get_txidle()=%d\n",
3017 __FILE__,__LINE__, info->device_name, info->idle_mode);
3018
3019 COPY_TO_USER(err,idle_mode, &info->idle_mode, sizeof(int));
3020 if (err) {
3021 if ( debug_level >= DEBUG_LEVEL_INFO )
3022 printk( "%s(%d):%s get_txidle() user buffer copy failed\n",
3023 __FILE__,__LINE__,info->device_name);
3024 return -EFAULT;
3025 }
3026
3027 return 0;
3028 }
3029
3030 static int set_txidle(SLMP_INFO * info, int idle_mode)
3031 {
3032 unsigned long flags;
3033
3034 if (debug_level >= DEBUG_LEVEL_INFO)
3035 printk("%s(%d):%s set_txidle(%d)\n",
3036 __FILE__,__LINE__,info->device_name, idle_mode );
3037
3038 spin_lock_irqsave(&info->lock,flags);
3039 info->idle_mode = idle_mode;
3040 tx_set_idle( info );
3041 spin_unlock_irqrestore(&info->lock,flags);
3042 return 0;
3043 }
3044
3045 static int tx_enable(SLMP_INFO * info, int enable)
3046 {
3047 unsigned long flags;
3048
3049 if (debug_level >= DEBUG_LEVEL_INFO)
3050 printk("%s(%d):%s tx_enable(%d)\n",
3051 __FILE__,__LINE__,info->device_name, enable);
3052
3053 spin_lock_irqsave(&info->lock,flags);
3054 if ( enable ) {
3055 if ( !info->tx_enabled ) {
3056 tx_start(info);
3057 }
3058 } else {
3059 if ( info->tx_enabled )
3060 tx_stop(info);
3061 }
3062 spin_unlock_irqrestore(&info->lock,flags);
3063 return 0;
3064 }
3065
3066 /* abort send HDLC frame
3067 */
3068 static int tx_abort(SLMP_INFO * info)
3069 {
3070 unsigned long flags;
3071
3072 if (debug_level >= DEBUG_LEVEL_INFO)
3073 printk("%s(%d):%s tx_abort()\n",
3074 __FILE__,__LINE__,info->device_name);
3075
3076 spin_lock_irqsave(&info->lock,flags);
3077 if ( info->tx_active && info->params.mode == MGSL_MODE_HDLC ) {
3078 info->ie1_value &= ~UDRN;
3079 info->ie1_value |= IDLE;
3080 write_reg(info, IE1, info->ie1_value); /* disable tx status interrupts */
3081 write_reg(info, SR1, (unsigned char)(IDLE + UDRN)); /* clear pending */
3082
3083 write_reg(info, TXDMA + DSR, 0); /* disable DMA channel */
3084 write_reg(info, TXDMA + DCMD, SWABORT); /* reset/init DMA channel */
3085
3086 write_reg(info, CMD, TXABORT);
3087 }
3088 spin_unlock_irqrestore(&info->lock,flags);
3089 return 0;
3090 }
3091
3092 static int rx_enable(SLMP_INFO * info, int enable)
3093 {
3094 unsigned long flags;
3095
3096 if (debug_level >= DEBUG_LEVEL_INFO)
3097 printk("%s(%d):%s rx_enable(%d)\n",
3098 __FILE__,__LINE__,info->device_name,enable);
3099
3100 spin_lock_irqsave(&info->lock,flags);
3101 if ( enable ) {
3102 if ( !info->rx_enabled )
3103 rx_start(info);
3104 } else {
3105 if ( info->rx_enabled )
3106 rx_stop(info);
3107 }
3108 spin_unlock_irqrestore(&info->lock,flags);
3109 return 0;
3110 }
3111
3112 static int map_status(int signals)
3113 {
3114 /* Map status bits to API event bits */
3115
3116 return ((signals & SerialSignal_DSR) ? MgslEvent_DsrActive : MgslEvent_DsrInactive) +
3117 ((signals & SerialSignal_CTS) ? MgslEvent_CtsActive : MgslEvent_CtsInactive) +
3118 ((signals & SerialSignal_DCD) ? MgslEvent_DcdActive : MgslEvent_DcdInactive) +
3119 ((signals & SerialSignal_RI) ? MgslEvent_RiActive : MgslEvent_RiInactive);
3120 }
3121
3122 /* wait for specified event to occur
3123 */
3124 static int wait_mgsl_event(SLMP_INFO * info, int __user *mask_ptr)
3125 {
3126 unsigned long flags;
3127 int s;
3128 int rc=0;
3129 struct mgsl_icount cprev, cnow;
3130 int events;
3131 int mask;
3132 struct _input_signal_events oldsigs, newsigs;
3133 DECLARE_WAITQUEUE(wait, current);
3134
3135 COPY_FROM_USER(rc,&mask, mask_ptr, sizeof(int));
3136 if (rc) {
3137 return -EFAULT;
3138 }
3139
3140 if (debug_level >= DEBUG_LEVEL_INFO)
3141 printk("%s(%d):%s wait_mgsl_event(%d)\n",
3142 __FILE__,__LINE__,info->device_name,mask);
3143
3144 spin_lock_irqsave(&info->lock,flags);
3145
3146 /* return immediately if state matches requested events */
3147 get_signals(info);
3148 s = map_status(info->serial_signals);
3149
3150 events = mask &
3151 ( ((s & SerialSignal_DSR) ? MgslEvent_DsrActive:MgslEvent_DsrInactive) +
3152 ((s & SerialSignal_DCD) ? MgslEvent_DcdActive:MgslEvent_DcdInactive) +
3153 ((s & SerialSignal_CTS) ? MgslEvent_CtsActive:MgslEvent_CtsInactive) +
3154 ((s & SerialSignal_RI) ? MgslEvent_RiActive :MgslEvent_RiInactive) );
3155 if (events) {
3156 spin_unlock_irqrestore(&info->lock,flags);
3157 goto exit;
3158 }
3159
3160 /* save current irq counts */
3161 cprev = info->icount;
3162 oldsigs = info->input_signal_events;
3163
3164 /* enable hunt and idle irqs if needed */
3165 if (mask & (MgslEvent_ExitHuntMode+MgslEvent_IdleReceived)) {
3166 unsigned char oldval = info->ie1_value;
3167 unsigned char newval = oldval +
3168 (mask & MgslEvent_ExitHuntMode ? FLGD:0) +
3169 (mask & MgslEvent_IdleReceived ? IDLD:0);
3170 if ( oldval != newval ) {
3171 info->ie1_value = newval;
3172 write_reg(info, IE1, info->ie1_value);
3173 }
3174 }
3175
3176 set_current_state(TASK_INTERRUPTIBLE);
3177 add_wait_queue(&info->event_wait_q, &wait);
3178
3179 spin_unlock_irqrestore(&info->lock,flags);
3180
3181 for(;;) {
3182 schedule();
3183 if (signal_pending(current)) {
3184 rc = -ERESTARTSYS;
3185 break;
3186 }
3187
3188 /* get current irq counts */
3189 spin_lock_irqsave(&info->lock,flags);
3190 cnow = info->icount;
3191 newsigs = info->input_signal_events;
3192 set_current_state(TASK_INTERRUPTIBLE);
3193 spin_unlock_irqrestore(&info->lock,flags);
3194
3195 /* if no change, wait aborted for some reason */
3196 if (newsigs.dsr_up == oldsigs.dsr_up &&
3197 newsigs.dsr_down == oldsigs.dsr_down &&
3198 newsigs.dcd_up == oldsigs.dcd_up &&
3199 newsigs.dcd_down == oldsigs.dcd_down &&
3200 newsigs.cts_up == oldsigs.cts_up &&
3201 newsigs.cts_down == oldsigs.cts_down &&
3202 newsigs.ri_up == oldsigs.ri_up &&
3203 newsigs.ri_down == oldsigs.ri_down &&
3204 cnow.exithunt == cprev.exithunt &&
3205 cnow.rxidle == cprev.rxidle) {
3206 rc = -EIO;
3207 break;
3208 }
3209
3210 events = mask &
3211 ( (newsigs.dsr_up != oldsigs.dsr_up ? MgslEvent_DsrActive:0) +
3212 (newsigs.dsr_down != oldsigs.dsr_down ? MgslEvent_DsrInactive:0) +
3213 (newsigs.dcd_up != oldsigs.dcd_up ? MgslEvent_DcdActive:0) +
3214 (newsigs.dcd_down != oldsigs.dcd_down ? MgslEvent_DcdInactive:0) +
3215 (newsigs.cts_up != oldsigs.cts_up ? MgslEvent_CtsActive:0) +
3216 (newsigs.cts_down != oldsigs.cts_down ? MgslEvent_CtsInactive:0) +
3217 (newsigs.ri_up != oldsigs.ri_up ? MgslEvent_RiActive:0) +
3218 (newsigs.ri_down != oldsigs.ri_down ? MgslEvent_RiInactive:0) +
3219 (cnow.exithunt != cprev.exithunt ? MgslEvent_ExitHuntMode:0) +
3220 (cnow.rxidle != cprev.rxidle ? MgslEvent_IdleReceived:0) );
3221 if (events)
3222 break;
3223
3224 cprev = cnow;
3225 oldsigs = newsigs;
3226 }
3227
3228 remove_wait_queue(&info->event_wait_q, &wait);
3229 set_current_state(TASK_RUNNING);
3230
3231
3232 if (mask & (MgslEvent_ExitHuntMode + MgslEvent_IdleReceived)) {
3233 spin_lock_irqsave(&info->lock,flags);
3234 if (!waitqueue_active(&info->event_wait_q)) {
3235 /* disable enable exit hunt mode/idle rcvd IRQs */
3236 info->ie1_value &= ~(FLGD|IDLD);
3237 write_reg(info, IE1, info->ie1_value);
3238 }
3239 spin_unlock_irqrestore(&info->lock,flags);
3240 }
3241 exit:
3242 if ( rc == 0 )
3243 PUT_USER(rc, events, mask_ptr);
3244
3245 return rc;
3246 }
3247
3248 static int modem_input_wait(SLMP_INFO *info,int arg)
3249 {
3250 unsigned long flags;
3251 int rc;
3252 struct mgsl_icount cprev, cnow;
3253 DECLARE_WAITQUEUE(wait, current);
3254
3255 /* save current irq counts */
3256 spin_lock_irqsave(&info->lock,flags);
3257 cprev = info->icount;
3258 add_wait_queue(&info->status_event_wait_q, &wait);
3259 set_current_state(TASK_INTERRUPTIBLE);
3260 spin_unlock_irqrestore(&info->lock,flags);
3261
3262 for(;;) {
3263 schedule();
3264 if (signal_pending(current)) {
3265 rc = -ERESTARTSYS;
3266 break;
3267 }
3268
3269 /* get new irq counts */
3270 spin_lock_irqsave(&info->lock,flags);
3271 cnow = info->icount;
3272 set_current_state(TASK_INTERRUPTIBLE);
3273 spin_unlock_irqrestore(&info->lock,flags);
3274
3275 /* if no change, wait aborted for some reason */
3276 if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
3277 cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) {
3278 rc = -EIO;
3279 break;
3280 }
3281
3282 /* check for change in caller specified modem input */
3283 if ((arg & TIOCM_RNG && cnow.rng != cprev.rng) ||
3284 (arg & TIOCM_DSR && cnow.dsr != cprev.dsr) ||
3285 (arg & TIOCM_CD && cnow.dcd != cprev.dcd) ||
3286 (arg & TIOCM_CTS && cnow.cts != cprev.cts)) {
3287 rc = 0;
3288 break;
3289 }
3290
3291 cprev = cnow;
3292 }
3293 remove_wait_queue(&info->status_event_wait_q, &wait);
3294 set_current_state(TASK_RUNNING);
3295 return rc;
3296 }
3297
3298 /* return the state of the serial control and status signals
3299 */
3300 static int tiocmget(struct tty_struct *tty, struct file *file)
3301 {
3302 SLMP_INFO *info = (SLMP_INFO *)tty->driver_data;
3303 unsigned int result;
3304 unsigned long flags;
3305
3306 spin_lock_irqsave(&info->lock,flags);
3307 get_signals(info);
3308 spin_unlock_irqrestore(&info->lock,flags);
3309
3310 result = ((info->serial_signals & SerialSignal_RTS) ? TIOCM_RTS:0) +
3311 ((info->serial_signals & SerialSignal_DTR) ? TIOCM_DTR:0) +
3312 ((info->serial_signals & SerialSignal_DCD) ? TIOCM_CAR:0) +
3313 ((info->serial_signals & SerialSignal_RI) ? TIOCM_RNG:0) +
3314 ((info->serial_signals & SerialSignal_DSR) ? TIOCM_DSR:0) +
3315 ((info->serial_signals & SerialSignal_CTS) ? TIOCM_CTS:0);
3316
3317 if (debug_level >= DEBUG_LEVEL_INFO)
3318 printk("%s(%d):%s tiocmget() value=%08X\n",
3319 __FILE__,__LINE__, info->device_name, result );
3320 return result;
3321 }
3322
3323 /* set modem control signals (DTR/RTS)
3324 */
3325 static int tiocmset(struct tty_struct *tty, struct file *file,
3326 unsigned int set, unsigned int clear)
3327 {
3328 SLMP_INFO *info = (SLMP_INFO *)tty->driver_data;
3329 unsigned long flags;
3330
3331 if (debug_level >= DEBUG_LEVEL_INFO)
3332 printk("%s(%d):%s tiocmset(%x,%x)\n",
3333 __FILE__,__LINE__,info->device_name, set, clear);
3334
3335 if (set & TIOCM_RTS)
3336 info->serial_signals |= SerialSignal_RTS;
3337 if (set & TIOCM_DTR)
3338 info->serial_signals |= SerialSignal_DTR;
3339 if (clear & TIOCM_RTS)
3340 info->serial_signals &= ~SerialSignal_RTS;
3341 if (clear & TIOCM_DTR)
3342 info->serial_signals &= ~SerialSignal_DTR;
3343
3344 spin_lock_irqsave(&info->lock,flags);
3345 set_signals(info);
3346 spin_unlock_irqrestore(&info->lock,flags);
3347
3348 return 0;
3349 }
3350
3351
3352
3353 /* Block the current process until the specified port is ready to open.
3354 */
3355 static int block_til_ready(struct tty_struct *tty, struct file *filp,
3356 SLMP_INFO *info)
3357 {
3358 DECLARE_WAITQUEUE(wait, current);
3359 int retval;
3360 int do_clocal = 0, extra_count = 0;
3361 unsigned long flags;
3362
3363 if (debug_level >= DEBUG_LEVEL_INFO)
3364 printk("%s(%d):%s block_til_ready()\n",
3365 __FILE__,__LINE__, tty->driver->name );
3366
3367 if (filp->f_flags & O_NONBLOCK || tty->flags & (1 << TTY_IO_ERROR)){
3368 /* nonblock mode is set or port is not enabled */
3369 /* just verify that callout device is not active */
3370 info->flags |= ASYNC_NORMAL_ACTIVE;
3371 return 0;
3372 }
3373
3374 if (tty->termios->c_cflag & CLOCAL)
3375 do_clocal = 1;
3376
3377 /* Wait for carrier detect and the line to become
3378 * free (i.e., not in use by the callout). While we are in
3379 * this loop, info->count is dropped by one, so that
3380 * close() knows when to free things. We restore it upon
3381 * exit, either normal or abnormal.
3382 */
3383
3384 retval = 0;
3385 add_wait_queue(&info->open_wait, &wait);
3386
3387 if (debug_level >= DEBUG_LEVEL_INFO)
3388 printk("%s(%d):%s block_til_ready() before block, count=%d\n",
3389 __FILE__,__LINE__, tty->driver->name, info->count );
3390
3391 spin_lock_irqsave(&info->lock, flags);
3392 if (!tty_hung_up_p(filp)) {
3393 extra_count = 1;
3394 info->count--;
3395 }
3396 spin_unlock_irqrestore(&info->lock, flags);
3397 info->blocked_open++;
3398
3399 while (1) {
3400 if ((tty->termios->c_cflag & CBAUD)) {
3401 spin_lock_irqsave(&info->lock,flags);
3402 info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR;
3403 set_signals(info);
3404 spin_unlock_irqrestore(&info->lock,flags);
3405 }
3406
3407 set_current_state(TASK_INTERRUPTIBLE);
3408
3409 if (tty_hung_up_p(filp) || !(info->flags & ASYNC_INITIALIZED)){
3410 retval = (info->flags & ASYNC_HUP_NOTIFY) ?
3411 -EAGAIN : -ERESTARTSYS;
3412 break;
3413 }
3414
3415 spin_lock_irqsave(&info->lock,flags);
3416 get_signals(info);
3417 spin_unlock_irqrestore(&info->lock,flags);
3418
3419 if (!(info->flags & ASYNC_CLOSING) &&
3420 (do_clocal || (info->serial_signals & SerialSignal_DCD)) ) {
3421 break;
3422 }
3423
3424 if (signal_pending(current)) {
3425 retval = -ERESTARTSYS;
3426 break;
3427 }
3428
3429 if (debug_level >= DEBUG_LEVEL_INFO)
3430 printk("%s(%d):%s block_til_ready() count=%d\n",
3431 __FILE__,__LINE__, tty->driver->name, info->count );
3432
3433 schedule();
3434 }
3435
3436 set_current_state(TASK_RUNNING);
3437 remove_wait_queue(&info->open_wait, &wait);
3438
3439 if (extra_count)
3440 info->count++;
3441 info->blocked_open--;
3442
3443 if (debug_level >= DEBUG_LEVEL_INFO)
3444 printk("%s(%d):%s block_til_ready() after, count=%d\n",
3445 __FILE__,__LINE__, tty->driver->name, info->count );
3446
3447 if (!retval)
3448 info->flags |= ASYNC_NORMAL_ACTIVE;
3449
3450 return retval;
3451 }
3452
3453 int alloc_dma_bufs(SLMP_INFO *info)
3454 {
3455 unsigned short BuffersPerFrame;
3456 unsigned short BufferCount;
3457
3458 // Force allocation to start at 64K boundary for each port.
3459 // This is necessary because *all* buffer descriptors for a port
3460 // *must* be in the same 64K block. All descriptors on a port
3461 // share a common 'base' address (upper 8 bits of 24 bits) programmed
3462 // into the CBP register.
3463 info->port_array[0]->last_mem_alloc = (SCA_MEM_SIZE/4) * info->port_num;
3464
3465 /* Calculate the number of DMA buffers necessary to hold the */
3466 /* largest allowable frame size. Note: If the max frame size is */
3467 /* not an even multiple of the DMA buffer size then we need to */
3468 /* round the buffer count per frame up one. */
3469
3470 BuffersPerFrame = (unsigned short)(info->max_frame_size/SCABUFSIZE);
3471 if ( info->max_frame_size % SCABUFSIZE )
3472 BuffersPerFrame++;
3473
3474 /* calculate total number of data buffers (SCABUFSIZE) possible
3475 * in one ports memory (SCA_MEM_SIZE/4) after allocating memory
3476 * for the descriptor list (BUFFERLISTSIZE).
3477 */
3478 BufferCount = (SCA_MEM_SIZE/4 - BUFFERLISTSIZE)/SCABUFSIZE;
3479
3480 /* limit number of buffers to maximum amount of descriptors */
3481 if (BufferCount > BUFFERLISTSIZE/sizeof(SCADESC))
3482 BufferCount = BUFFERLISTSIZE/sizeof(SCADESC);
3483
3484 /* use enough buffers to transmit one max size frame */
3485 info->tx_buf_count = BuffersPerFrame + 1;
3486
3487 /* never use more than half the available buffers for transmit */
3488 if (info->tx_buf_count > (BufferCount/2))
3489 info->tx_buf_count = BufferCount/2;
3490
3491 if (info->tx_buf_count > SCAMAXDESC)
3492 info->tx_buf_count = SCAMAXDESC;
3493
3494 /* use remaining buffers for receive */
3495 info->rx_buf_count = BufferCount - info->tx_buf_count;
3496
3497 if (info->rx_buf_count > SCAMAXDESC)
3498 info->rx_buf_count = SCAMAXDESC;
3499
3500 if ( debug_level >= DEBUG_LEVEL_INFO )
3501 printk("%s(%d):%s Allocating %d TX and %d RX DMA buffers.\n",
3502 __FILE__,__LINE__, info->device_name,
3503 info->tx_buf_count,info->rx_buf_count);
3504
3505 if ( alloc_buf_list( info ) < 0 ||
3506 alloc_frame_bufs(info,
3507 info->rx_buf_list,
3508 info->rx_buf_list_ex,
3509 info->rx_buf_count) < 0 ||
3510 alloc_frame_bufs(info,
3511 info->tx_buf_list,
3512 info->tx_buf_list_ex,
3513 info->tx_buf_count) < 0 ||
3514 alloc_tmp_rx_buf(info) < 0 ) {
3515 printk("%s(%d):%s Can't allocate DMA buffer memory\n",
3516 __FILE__,__LINE__, info->device_name);
3517 return -ENOMEM;
3518 }
3519
3520 rx_reset_buffers( info );
3521
3522 return 0;
3523 }
3524
3525 /* Allocate DMA buffers for the transmit and receive descriptor lists.
3526 */
3527 int alloc_buf_list(SLMP_INFO *info)
3528 {
3529 unsigned int i;
3530
3531 /* build list in adapter shared memory */
3532 info->buffer_list = info->memory_base + info->port_array[0]->last_mem_alloc;
3533 info->buffer_list_phys = info->port_array[0]->last_mem_alloc;
3534 info->port_array[0]->last_mem_alloc += BUFFERLISTSIZE;
3535
3536 memset(info->buffer_list, 0, BUFFERLISTSIZE);
3537
3538 /* Save virtual address pointers to the receive and */
3539 /* transmit buffer lists. (Receive 1st). These pointers will */
3540 /* be used by the processor to access the lists. */
3541 info->rx_buf_list = (SCADESC *)info->buffer_list;
3542
3543 info->tx_buf_list = (SCADESC *)info->buffer_list;
3544 info->tx_buf_list += info->rx_buf_count;
3545
3546 /* Build links for circular buffer entry lists (tx and rx)
3547 *
3548 * Note: links are physical addresses read by the SCA device
3549 * to determine the next buffer entry to use.
3550 */
3551
3552 for ( i = 0; i < info->rx_buf_count; i++ ) {
3553 /* calculate and store physical address of this buffer entry */
3554 info->rx_buf_list_ex[i].phys_entry =
3555 info->buffer_list_phys + (i * sizeof(SCABUFSIZE));
3556
3557 /* calculate and store physical address of */
3558 /* next entry in cirular list of entries */
3559 info->rx_buf_list[i].next = info->buffer_list_phys;
3560 if ( i < info->rx_buf_count - 1 )
3561 info->rx_buf_list[i].next += (i + 1) * sizeof(SCADESC);
3562
3563 info->rx_buf_list[i].length = SCABUFSIZE;
3564 }
3565
3566 for ( i = 0; i < info->tx_buf_count; i++ ) {
3567 /* calculate and store physical address of this buffer entry */
3568 info->tx_buf_list_ex[i].phys_entry = info->buffer_list_phys +
3569 ((info->rx_buf_count + i) * sizeof(SCADESC));
3570
3571 /* calculate and store physical address of */
3572 /* next entry in cirular list of entries */
3573
3574 info->tx_buf_list[i].next = info->buffer_list_phys +
3575 info->rx_buf_count * sizeof(SCADESC);
3576
3577 if ( i < info->tx_buf_count - 1 )
3578 info->tx_buf_list[i].next += (i + 1) * sizeof(SCADESC);
3579 }
3580
3581 return 0;
3582 }
3583
3584 /* Allocate the frame DMA buffers used by the specified buffer list.
3585 */
3586 int alloc_frame_bufs(SLMP_INFO *info, SCADESC *buf_list,SCADESC_EX *buf_list_ex,int count)
3587 {
3588 int i;
3589 unsigned long phys_addr;
3590
3591 for ( i = 0; i < count; i++ ) {
3592 buf_list_ex[i].virt_addr = info->memory_base + info->port_array[0]->last_mem_alloc;
3593 phys_addr = info->port_array[0]->last_mem_alloc;
3594 info->port_array[0]->last_mem_alloc += SCABUFSIZE;
3595
3596 buf_list[i].buf_ptr = (unsigned short)phys_addr;
3597 buf_list[i].buf_base = (unsigned char)(phys_addr >> 16);
3598 }
3599
3600 return 0;
3601 }
3602
3603 void free_dma_bufs(SLMP_INFO *info)
3604 {
3605 info->buffer_list = NULL;
3606 info->rx_buf_list = NULL;
3607 info->tx_buf_list = NULL;
3608 }
3609
3610 /* allocate buffer large enough to hold max_frame_size.
3611 * This buffer is used to pass an assembled frame to the line discipline.
3612 */
3613 int alloc_tmp_rx_buf(SLMP_INFO *info)
3614 {
3615 info->tmp_rx_buf = kmalloc(info->max_frame_size, GFP_KERNEL);
3616 if (info->tmp_rx_buf == NULL)
3617 return -ENOMEM;
3618 return 0;
3619 }
3620
3621 void free_tmp_rx_buf(SLMP_INFO *info)
3622 {
3623 if (info->tmp_rx_buf)
3624 kfree(info->tmp_rx_buf);
3625 info->tmp_rx_buf = NULL;
3626 }
3627
3628 int claim_resources(SLMP_INFO *info)
3629 {
3630 if (request_mem_region(info->phys_memory_base,SCA_MEM_SIZE,"synclinkmp") == NULL) {
3631 printk( "%s(%d):%s mem addr conflict, Addr=%08X\n",
3632 __FILE__,__LINE__,info->device_name, info->phys_memory_base);
3633 info->init_error = DiagStatus_AddressConflict;
3634 goto errout;
3635 }
3636 else
3637 info->shared_mem_requested = 1;
3638
3639 if (request_mem_region(info->phys_lcr_base + info->lcr_offset,128,"synclinkmp") == NULL) {
3640 printk( "%s(%d):%s lcr mem addr conflict, Addr=%08X\n",
3641 __FILE__,__LINE__,info->device_name, info->phys_lcr_base);
3642 info->init_error = DiagStatus_AddressConflict;
3643 goto errout;
3644 }
3645 else
3646 info->lcr_mem_requested = 1;
3647
3648 if (request_mem_region(info->phys_sca_base + info->sca_offset,SCA_BASE_SIZE,"synclinkmp") == NULL) {
3649 printk( "%s(%d):%s sca mem addr conflict, Addr=%08X\n",
3650 __FILE__,__LINE__,info->device_name, info->phys_sca_base);
3651 info->init_error = DiagStatus_AddressConflict;
3652 goto errout;
3653 }
3654 else
3655 info->sca_base_requested = 1;
3656
3657 if (request_mem_region(info->phys_statctrl_base + info->statctrl_offset,SCA_REG_SIZE,"synclinkmp") == NULL) {
3658 printk( "%s(%d):%s stat/ctrl mem addr conflict, Addr=%08X\n",
3659 __FILE__,__LINE__,info->device_name, info->phys_statctrl_base);
3660 info->init_error = DiagStatus_AddressConflict;
3661 goto errout;
3662 }
3663 else
3664 info->sca_statctrl_requested = 1;
3665
3666 info->memory_base = ioremap(info->phys_memory_base,SCA_MEM_SIZE);
3667 if (!info->memory_base) {
3668 printk( "%s(%d):%s Cant map shared memory, MemAddr=%08X\n",
3669 __FILE__,__LINE__,info->device_name, info->phys_memory_base );
3670 info->init_error = DiagStatus_CantAssignPciResources;
3671 goto errout;
3672 }
3673
3674 info->lcr_base = ioremap(info->phys_lcr_base,PAGE_SIZE);
3675 if (!info->lcr_base) {
3676 printk( "%s(%d):%s Cant map LCR memory, MemAddr=%08X\n",
3677 __FILE__,__LINE__,info->device_name, info->phys_lcr_base );
3678 info->init_error = DiagStatus_CantAssignPciResources;
3679 goto errout;
3680 }
3681 info->lcr_base += info->lcr_offset;
3682
3683 info->sca_base = ioremap(info->phys_sca_base,PAGE_SIZE);
3684 if (!info->sca_base) {
3685 printk( "%s(%d):%s Cant map SCA memory, MemAddr=%08X\n",
3686 __FILE__,__LINE__,info->device_name, info->phys_sca_base );
3687 info->init_error = DiagStatus_CantAssignPciResources;
3688 goto errout;
3689 }
3690 info->sca_base += info->sca_offset;
3691
3692 info->statctrl_base = ioremap(info->phys_statctrl_base,PAGE_SIZE);
3693 if (!info->statctrl_base) {
3694 printk( "%s(%d):%s Cant map SCA Status/Control memory, MemAddr=%08X\n",
3695 __FILE__,__LINE__,info->device_name, info->phys_statctrl_base );
3696 info->init_error = DiagStatus_CantAssignPciResources;
3697 goto errout;
3698 }
3699 info->statctrl_base += info->statctrl_offset;
3700
3701 if ( !memory_test(info) ) {
3702 printk( "%s(%d):Shared Memory Test failed for device %s MemAddr=%08X\n",
3703 __FILE__,__LINE__,info->device_name, info->phys_memory_base );
3704 info->init_error = DiagStatus_MemoryError;
3705 goto errout;
3706 }
3707
3708 return 0;
3709
3710 errout:
3711 release_resources( info );
3712 return -ENODEV;
3713 }
3714
3715 void release_resources(SLMP_INFO *info)
3716 {
3717 if ( debug_level >= DEBUG_LEVEL_INFO )
3718 printk( "%s(%d):%s release_resources() entry\n",
3719 __FILE__,__LINE__,info->device_name );
3720
3721 if ( info->irq_requested ) {
3722 free_irq(info->irq_level, info);
3723 info->irq_requested = 0;
3724 }
3725
3726 if ( info->shared_mem_requested ) {
3727 release_mem_region(info->phys_memory_base,SCA_MEM_SIZE);
3728 info->shared_mem_requested = 0;
3729 }
3730 if ( info->lcr_mem_requested ) {
3731 release_mem_region(info->phys_lcr_base + info->lcr_offset,128);
3732 info->lcr_mem_requested = 0;
3733 }
3734 if ( info->sca_base_requested ) {
3735 release_mem_region(info->phys_sca_base + info->sca_offset,SCA_BASE_SIZE);
3736 info->sca_base_requested = 0;
3737 }
3738 if ( info->sca_statctrl_requested ) {
3739 release_mem_region(info->phys_statctrl_base + info->statctrl_offset,SCA_REG_SIZE);
3740 info->sca_statctrl_requested = 0;
3741 }
3742
3743 if (info->memory_base){
3744 iounmap(info->memory_base);
3745 info->memory_base = NULL;
3746 }
3747
3748 if (info->sca_base) {
3749 iounmap(info->sca_base - info->sca_offset);
3750 info->sca_base=NULL;
3751 }
3752
3753 if (info->statctrl_base) {
3754 iounmap(info->statctrl_base - info->statctrl_offset);
3755 info->statctrl_base=NULL;
3756 }
3757
3758 if (info->lcr_base){
3759 iounmap(info->lcr_base - info->lcr_offset);
3760 info->lcr_base = NULL;
3761 }
3762
3763 if ( debug_level >= DEBUG_LEVEL_INFO )
3764 printk( "%s(%d):%s release_resources() exit\n",
3765 __FILE__,__LINE__,info->device_name );
3766 }
3767
3768 /* Add the specified device instance data structure to the
3769 * global linked list of devices and increment the device count.
3770 */
3771 void add_device(SLMP_INFO *info)
3772 {
3773 info->next_device = NULL;
3774 info->line = synclinkmp_device_count;
3775 sprintf(info->device_name,"ttySLM%dp%d",info->adapter_num,info->port_num);
3776
3777 if (info->line < MAX_DEVICES) {
3778 if (maxframe[info->line])
3779 info->max_frame_size = maxframe[info->line];
3780 info->dosyncppp = dosyncppp[info->line];
3781 }
3782
3783 synclinkmp_device_count++;
3784
3785 if ( !synclinkmp_device_list )
3786 synclinkmp_device_list = info;
3787 else {
3788 SLMP_INFO *current_dev = synclinkmp_device_list;
3789 while( current_dev->next_device )
3790 current_dev = current_dev->next_device;
3791 current_dev->next_device = info;
3792 }
3793
3794 if ( info->max_frame_size < 4096 )
3795 info->max_frame_size = 4096;
3796 else if ( info->max_frame_size > 65535 )
3797 info->max_frame_size = 65535;
3798
3799 printk( "SyncLink MultiPort %s: "
3800 "Mem=(%08x %08X %08x %08X) IRQ=%d MaxFrameSize=%u\n",
3801 info->device_name,
3802 info->phys_sca_base,
3803 info->phys_memory_base,
3804 info->phys_statctrl_base,
3805 info->phys_lcr_base,
3806 info->irq_level,
3807 info->max_frame_size );
3808
3809 #ifdef CONFIG_HDLC
3810 hdlcdev_init(info);
3811 #endif
3812 }
3813
3814 /* Allocate and initialize a device instance structure
3815 *
3816 * Return Value: pointer to SLMP_INFO if success, otherwise NULL
3817 */
3818 static SLMP_INFO *alloc_dev(int adapter_num, int port_num, struct pci_dev *pdev)
3819 {
3820 SLMP_INFO *info;
3821
3822 info = (SLMP_INFO *)kmalloc(sizeof(SLMP_INFO),
3823 GFP_KERNEL);
3824
3825 if (!info) {
3826 printk("%s(%d) Error can't allocate device instance data for adapter %d, port %d\n",
3827 __FILE__,__LINE__, adapter_num, port_num);
3828 } else {
3829 memset(info, 0, sizeof(SLMP_INFO));
3830 info->magic = MGSL_MAGIC;
3831 INIT_WORK(&info->task, bh_handler, info);
3832 info->max_frame_size = 4096;
3833 info->close_delay = 5*HZ/10;
3834 info->closing_wait = 30*HZ;
3835 init_waitqueue_head(&info->open_wait);
3836 init_waitqueue_head(&info->close_wait);
3837 init_waitqueue_head(&info->status_event_wait_q);
3838 init_waitqueue_head(&info->event_wait_q);
3839 spin_lock_init(&info->netlock);
3840 memcpy(&info->params,&default_params,sizeof(MGSL_PARAMS));
3841 info->idle_mode = HDLC_TXIDLE_FLAGS;
3842 info->adapter_num = adapter_num;
3843 info->port_num = port_num;
3844
3845 /* Copy configuration info to device instance data */
3846 info->irq_level = pdev->irq;
3847 info->phys_lcr_base = pci_resource_start(pdev,0);
3848 info->phys_sca_base = pci_resource_start(pdev,2);
3849 info->phys_memory_base = pci_resource_start(pdev,3);
3850 info->phys_statctrl_base = pci_resource_start(pdev,4);
3851
3852 /* Because veremap only works on page boundaries we must map
3853 * a larger area than is actually implemented for the LCR
3854 * memory range. We map a full page starting at the page boundary.
3855 */
3856 info->lcr_offset = info->phys_lcr_base & (PAGE_SIZE-1);
3857 info->phys_lcr_base &= ~(PAGE_SIZE-1);
3858
3859 info->sca_offset = info->phys_sca_base & (PAGE_SIZE-1);
3860 info->phys_sca_base &= ~(PAGE_SIZE-1);
3861
3862 info->statctrl_offset = info->phys_statctrl_base & (PAGE_SIZE-1);
3863 info->phys_statctrl_base &= ~(PAGE_SIZE-1);
3864
3865 info->bus_type = MGSL_BUS_TYPE_PCI;
3866 info->irq_flags = SA_SHIRQ;
3867
3868 init_timer(&info->tx_timer);
3869 info->tx_timer.data = (unsigned long)info;
3870 info->tx_timer.function = tx_timeout;
3871
3872 init_timer(&info->status_timer);
3873 info->status_timer.data = (unsigned long)info;
3874 info->status_timer.function = status_timeout;
3875
3876 /* Store the PCI9050 misc control register value because a flaw
3877 * in the PCI9050 prevents LCR registers from being read if
3878 * BIOS assigns an LCR base address with bit 7 set.
3879 *
3880 * Only the misc control register is accessed for which only
3881 * write access is needed, so set an initial value and change
3882 * bits to the device instance data as we write the value
3883 * to the actual misc control register.
3884 */
3885 info->misc_ctrl_value = 0x087e4546;
3886
3887 /* initial port state is unknown - if startup errors
3888 * occur, init_error will be set to indicate the
3889 * problem. Once the port is fully initialized,
3890 * this value will be set to 0 to indicate the
3891 * port is available.
3892 */
3893 info->init_error = -1;
3894 }
3895
3896 return info;
3897 }
3898
3899 void device_init(int adapter_num, struct pci_dev *pdev)
3900 {
3901 SLMP_INFO *port_array[SCA_MAX_PORTS];
3902 int port;
3903
3904 /* allocate device instances for up to SCA_MAX_PORTS devices */
3905 for ( port = 0; port < SCA_MAX_PORTS; ++port ) {
3906 port_array[port] = alloc_dev(adapter_num,port,pdev);
3907 if( port_array[port] == NULL ) {
3908 for ( --port; port >= 0; --port )
3909 kfree(port_array[port]);
3910 return;
3911 }
3912 }
3913
3914 /* give copy of port_array to all ports and add to device list */
3915 for ( port = 0; port < SCA_MAX_PORTS; ++port ) {
3916 memcpy(port_array[port]->port_array,port_array,sizeof(port_array));
3917 add_device( port_array[port] );
3918 spin_lock_init(&port_array[port]->lock);
3919 }
3920
3921 /* Allocate and claim adapter resources */
3922 if ( !claim_resources(port_array[0]) ) {
3923
3924 alloc_dma_bufs(port_array[0]);
3925
3926 /* copy resource information from first port to others */
3927 for ( port = 1; port < SCA_MAX_PORTS; ++port ) {
3928 port_array[port]->lock = port_array[0]->lock;
3929 port_array[port]->irq_level = port_array[0]->irq_level;
3930 port_array[port]->memory_base = port_array[0]->memory_base;
3931 port_array[port]->sca_base = port_array[0]->sca_base;
3932 port_array[port]->statctrl_base = port_array[0]->statctrl_base;
3933 port_array[port]->lcr_base = port_array[0]->lcr_base;
3934 alloc_dma_bufs(port_array[port]);
3935 }
3936
3937 if ( request_irq(port_array[0]->irq_level,
3938 synclinkmp_interrupt,
3939 port_array[0]->irq_flags,
3940 port_array[0]->device_name,
3941 port_array[0]) < 0 ) {
3942 printk( "%s(%d):%s Cant request interrupt, IRQ=%d\n",
3943 __FILE__,__LINE__,
3944 port_array[0]->device_name,
3945 port_array[0]->irq_level );
3946 }
3947 else {
3948 port_array[0]->irq_requested = 1;
3949 adapter_test(port_array[0]);
3950 }
3951 }
3952 }
3953
3954 static struct tty_operations ops = {
3955 .open = open,
3956 .close = close,
3957 .write = write,
3958 .put_char = put_char,
3959 .flush_chars = flush_chars,
3960 .write_room = write_room,
3961 .chars_in_buffer = chars_in_buffer,
3962 .flush_buffer = flush_buffer,
3963 .ioctl = ioctl,
3964 .throttle = throttle,
3965 .unthrottle = unthrottle,
3966 .send_xchar = send_xchar,
3967 .break_ctl = set_break,
3968 .wait_until_sent = wait_until_sent,
3969 .read_proc = read_proc,
3970 .set_termios = set_termios,
3971 .stop = tx_hold,
3972 .start = tx_release,
3973 .hangup = hangup,
3974 .tiocmget = tiocmget,
3975 .tiocmset = tiocmset,
3976 };
3977
3978 static void synclinkmp_cleanup(void)
3979 {
3980 int rc;
3981 SLMP_INFO *info;
3982 SLMP_INFO *tmp;
3983
3984 printk("Unloading %s %s\n", driver_name, driver_version);
3985
3986 if (serial_driver) {
3987 if ((rc = tty_unregister_driver(serial_driver)))
3988 printk("%s(%d) failed to unregister tty driver err=%d\n",
3989 __FILE__,__LINE__,rc);
3990 put_tty_driver(serial_driver);
3991 }
3992
3993 /* reset devices */
3994 info = synclinkmp_device_list;
3995 while(info) {
3996 reset_port(info);
3997 info = info->next_device;
3998 }
3999
4000 /* release devices */
4001 info = synclinkmp_device_list;
4002 while(info) {
4003 #ifdef CONFIG_HDLC
4004 hdlcdev_exit(info);
4005 #endif
4006 free_dma_bufs(info);
4007 free_tmp_rx_buf(info);
4008 if ( info->port_num == 0 ) {
4009 if (info->sca_base)
4010 write_reg(info, LPR, 1); /* set low power mode */
4011 release_resources(info);
4012 }
4013 tmp = info;
4014 info = info->next_device;
4015 kfree(tmp);
4016 }
4017
4018 pci_unregister_driver(&synclinkmp_pci_driver);
4019 }
4020
4021 /* Driver initialization entry point.
4022 */
4023
4024 static int __init synclinkmp_init(void)
4025 {
4026 int rc;
4027
4028 if (break_on_load) {
4029 synclinkmp_get_text_ptr();
4030 BREAKPOINT();
4031 }
4032
4033 printk("%s %s\n", driver_name, driver_version);
4034
4035 if ((rc = pci_register_driver(&synclinkmp_pci_driver)) < 0) {
4036 printk("%s:failed to register PCI driver, error=%d\n",__FILE__,rc);
4037 return rc;
4038 }
4039
4040 serial_driver = alloc_tty_driver(128);
4041 if (!serial_driver) {
4042 rc = -ENOMEM;
4043 goto error;
4044 }
4045
4046 /* Initialize the tty_driver structure */
4047
4048 serial_driver->owner = THIS_MODULE;
4049 serial_driver->driver_name = "synclinkmp";
4050 serial_driver->name = "ttySLM";
4051 serial_driver->major = ttymajor;
4052 serial_driver->minor_start = 64;
4053 serial_driver->type = TTY_DRIVER_TYPE_SERIAL;
4054 serial_driver->subtype = SERIAL_TYPE_NORMAL;
4055 serial_driver->init_termios = tty_std_termios;
4056 serial_driver->init_termios.c_cflag =
4057 B9600 | CS8 | CREAD | HUPCL | CLOCAL;
4058 serial_driver->flags = TTY_DRIVER_REAL_RAW;
4059 tty_set_operations(serial_driver, &ops);
4060 if ((rc = tty_register_driver(serial_driver)) < 0) {
4061 printk("%s(%d):Couldn't register serial driver\n",
4062 __FILE__,__LINE__);
4063 put_tty_driver(serial_driver);
4064 serial_driver = NULL;
4065 goto error;
4066 }
4067
4068 printk("%s %s, tty major#%d\n",
4069 driver_name, driver_version,
4070 serial_driver->major);
4071
4072 return 0;
4073
4074 error:
4075 synclinkmp_cleanup();
4076 return rc;
4077 }
4078
4079 static void __exit synclinkmp_exit(void)
4080 {
4081 synclinkmp_cleanup();
4082 }
4083
4084 module_init(synclinkmp_init);
4085 module_exit(synclinkmp_exit);
4086
4087 /* Set the port for internal loopback mode.
4088 * The TxCLK and RxCLK signals are generated from the BRG and
4089 * the TxD is looped back to the RxD internally.
4090 */
4091 void enable_loopback(SLMP_INFO *info, int enable)
4092 {
4093 if (enable) {
4094 /* MD2 (Mode Register 2)
4095 * 01..00 CNCT<1..0> Channel Connection 11=Local Loopback
4096 */
4097 write_reg(info, MD2, (unsigned char)(read_reg(info, MD2) | (BIT1 + BIT0)));
4098
4099 /* degate external TxC clock source */
4100 info->port_array[0]->ctrlreg_value |= (BIT0 << (info->port_num * 2));
4101 write_control_reg(info);
4102
4103 /* RXS/TXS (Rx/Tx clock source)
4104 * 07 Reserved, must be 0
4105 * 06..04 Clock Source, 100=BRG
4106 * 03..00 Clock Divisor, 0000=1
4107 */
4108 write_reg(info, RXS, 0x40);
4109 write_reg(info, TXS, 0x40);
4110
4111 } else {
4112 /* MD2 (Mode Register 2)
4113 * 01..00 CNCT<1..0> Channel connection, 0=normal
4114 */
4115 write_reg(info, MD2, (unsigned char)(read_reg(info, MD2) & ~(BIT1 + BIT0)));
4116
4117 /* RXS/TXS (Rx/Tx clock source)
4118 * 07 Reserved, must be 0
4119 * 06..04 Clock Source, 000=RxC/TxC Pin
4120 * 03..00 Clock Divisor, 0000=1
4121 */
4122 write_reg(info, RXS, 0x00);
4123 write_reg(info, TXS, 0x00);
4124 }
4125
4126 /* set LinkSpeed if available, otherwise default to 2Mbps */
4127 if (info->params.clock_speed)
4128 set_rate(info, info->params.clock_speed);
4129 else
4130 set_rate(info, 3686400);
4131 }
4132
4133 /* Set the baud rate register to the desired speed
4134 *
4135 * data_rate data rate of clock in bits per second
4136 * A data rate of 0 disables the AUX clock.
4137 */
4138 void set_rate( SLMP_INFO *info, u32 data_rate )
4139 {
4140 u32 TMCValue;
4141 unsigned char BRValue;
4142 u32 Divisor=0;
4143
4144 /* fBRG = fCLK/(TMC * 2^BR)
4145 */
4146 if (data_rate != 0) {
4147 Divisor = 14745600/data_rate;
4148 if (!Divisor)
4149 Divisor = 1;
4150
4151 TMCValue = Divisor;
4152
4153 BRValue = 0;
4154 if (TMCValue != 1 && TMCValue != 2) {
4155 /* BRValue of 0 provides 50/50 duty cycle *only* when
4156 * TMCValue is 1 or 2. BRValue of 1 to 9 always provides
4157 * 50/50 duty cycle.
4158 */
4159 BRValue = 1;
4160 TMCValue >>= 1;
4161 }
4162
4163 /* while TMCValue is too big for TMC register, divide
4164 * by 2 and increment BR exponent.
4165 */
4166 for(; TMCValue > 256 && BRValue < 10; BRValue++)
4167 TMCValue >>= 1;
4168
4169 write_reg(info, TXS,
4170 (unsigned char)((read_reg(info, TXS) & 0xf0) | BRValue));
4171 write_reg(info, RXS,
4172 (unsigned char)((read_reg(info, RXS) & 0xf0) | BRValue));
4173 write_reg(info, TMC, (unsigned char)TMCValue);
4174 }
4175 else {
4176 write_reg(info, TXS,0);
4177 write_reg(info, RXS,0);
4178 write_reg(info, TMC, 0);
4179 }
4180 }
4181
4182 /* Disable receiver
4183 */
4184 void rx_stop(SLMP_INFO *info)
4185 {
4186 if (debug_level >= DEBUG_LEVEL_ISR)
4187 printk("%s(%d):%s rx_stop()\n",
4188 __FILE__,__LINE__, info->device_name );
4189
4190 write_reg(info, CMD, RXRESET);
4191
4192 info->ie0_value &= ~RXRDYE;
4193 write_reg(info, IE0, info->ie0_value); /* disable Rx data interrupts */
4194
4195 write_reg(info, RXDMA + DSR, 0); /* disable Rx DMA */
4196 write_reg(info, RXDMA + DCMD, SWABORT); /* reset/init Rx DMA */
4197 write_reg(info, RXDMA + DIR, 0); /* disable Rx DMA interrupts */
4198
4199 info->rx_enabled = 0;
4200 info->rx_overflow = 0;
4201 }
4202
4203 /* enable the receiver
4204 */
4205 void rx_start(SLMP_INFO *info)
4206 {
4207 int i;
4208
4209 if (debug_level >= DEBUG_LEVEL_ISR)
4210 printk("%s(%d):%s rx_start()\n",
4211 __FILE__,__LINE__, info->device_name );
4212
4213 write_reg(info, CMD, RXRESET);
4214
4215 if ( info->params.mode == MGSL_MODE_HDLC ) {
4216 /* HDLC, disabe IRQ on rxdata */
4217 info->ie0_value &= ~RXRDYE;
4218 write_reg(info, IE0, info->ie0_value);
4219
4220 /* Reset all Rx DMA buffers and program rx dma */
4221 write_reg(info, RXDMA + DSR, 0); /* disable Rx DMA */
4222 write_reg(info, RXDMA + DCMD, SWABORT); /* reset/init Rx DMA */
4223
4224 for (i = 0; i < info->rx_buf_count; i++) {
4225 info->rx_buf_list[i].status = 0xff;
4226
4227 // throttle to 4 shared memory writes at a time to prevent
4228 // hogging local bus (keep latency time for DMA requests low).
4229 if (!(i % 4))
4230 read_status_reg(info);
4231 }
4232 info->current_rx_buf = 0;
4233
4234 /* set current/1st descriptor address */
4235 write_reg16(info, RXDMA + CDA,
4236 info->rx_buf_list_ex[0].phys_entry);
4237
4238 /* set new last rx descriptor address */
4239 write_reg16(info, RXDMA + EDA,
4240 info->rx_buf_list_ex[info->rx_buf_count - 1].phys_entry);
4241
4242 /* set buffer length (shared by all rx dma data buffers) */
4243 write_reg16(info, RXDMA + BFL, SCABUFSIZE);
4244
4245 write_reg(info, RXDMA + DIR, 0x60); /* enable Rx DMA interrupts (EOM/BOF) */
4246 write_reg(info, RXDMA + DSR, 0xf2); /* clear Rx DMA IRQs, enable Rx DMA */
4247 } else {
4248 /* async, enable IRQ on rxdata */
4249 info->ie0_value |= RXRDYE;
4250 write_reg(info, IE0, info->ie0_value);
4251 }
4252
4253 write_reg(info, CMD, RXENABLE);
4254
4255 info->rx_overflow = FALSE;
4256 info->rx_enabled = 1;
4257 }
4258
4259 /* Enable the transmitter and send a transmit frame if
4260 * one is loaded in the DMA buffers.
4261 */
4262 void tx_start(SLMP_INFO *info)
4263 {
4264 if (debug_level >= DEBUG_LEVEL_ISR)
4265 printk("%s(%d):%s tx_start() tx_count=%d\n",
4266 __FILE__,__LINE__, info->device_name,info->tx_count );
4267
4268 if (!info->tx_enabled ) {
4269 write_reg(info, CMD, TXRESET);
4270 write_reg(info, CMD, TXENABLE);
4271 info->tx_enabled = TRUE;
4272 }
4273
4274 if ( info->tx_count ) {
4275
4276 /* If auto RTS enabled and RTS is inactive, then assert */
4277 /* RTS and set a flag indicating that the driver should */
4278 /* negate RTS when the transmission completes. */
4279
4280 info->drop_rts_on_tx_done = 0;
4281
4282 if (info->params.mode != MGSL_MODE_ASYNC) {
4283
4284 if ( info->params.flags & HDLC_FLAG_AUTO_RTS ) {
4285 get_signals( info );
4286 if ( !(info->serial_signals & SerialSignal_RTS) ) {
4287 info->serial_signals |= SerialSignal_RTS;
4288 set_signals( info );
4289 info->drop_rts_on_tx_done = 1;
4290 }
4291 }
4292
4293 write_reg16(info, TRC0,
4294 (unsigned short)(((tx_negate_fifo_level-1)<<8) + tx_active_fifo_level));
4295
4296 write_reg(info, TXDMA + DSR, 0); /* disable DMA channel */
4297 write_reg(info, TXDMA + DCMD, SWABORT); /* reset/init DMA channel */
4298
4299 /* set TX CDA (current descriptor address) */
4300 write_reg16(info, TXDMA + CDA,
4301 info->tx_buf_list_ex[0].phys_entry);
4302
4303 /* set TX EDA (last descriptor address) */
4304 write_reg16(info, TXDMA + EDA,
4305 info->tx_buf_list_ex[info->last_tx_buf].phys_entry);
4306
4307 /* enable underrun IRQ */
4308 info->ie1_value &= ~IDLE;
4309 info->ie1_value |= UDRN;
4310 write_reg(info, IE1, info->ie1_value);
4311 write_reg(info, SR1, (unsigned char)(IDLE + UDRN));
4312
4313 write_reg(info, TXDMA + DIR, 0x40); /* enable Tx DMA interrupts (EOM) */
4314 write_reg(info, TXDMA + DSR, 0xf2); /* clear Tx DMA IRQs, enable Tx DMA */
4315
4316 info->tx_timer.expires = jiffies + msecs_to_jiffies(5000);
4317 add_timer(&info->tx_timer);
4318 }
4319 else {
4320 tx_load_fifo(info);
4321 /* async, enable IRQ on txdata */
4322 info->ie0_value |= TXRDYE;
4323 write_reg(info, IE0, info->ie0_value);
4324 }
4325
4326 info->tx_active = 1;
4327 }
4328 }
4329
4330 /* stop the transmitter and DMA
4331 */
4332 void tx_stop( SLMP_INFO *info )
4333 {
4334 if (debug_level >= DEBUG_LEVEL_ISR)
4335 printk("%s(%d):%s tx_stop()\n",
4336 __FILE__,__LINE__, info->device_name );
4337
4338 del_timer(&info->tx_timer);
4339
4340 write_reg(info, TXDMA + DSR, 0); /* disable DMA channel */
4341 write_reg(info, TXDMA + DCMD, SWABORT); /* reset/init DMA channel */
4342
4343 write_reg(info, CMD, TXRESET);
4344
4345 info->ie1_value &= ~(UDRN + IDLE);
4346 write_reg(info, IE1, info->ie1_value); /* disable tx status interrupts */
4347 write_reg(info, SR1, (unsigned char)(IDLE + UDRN)); /* clear pending */
4348
4349 info->ie0_value &= ~TXRDYE;
4350 write_reg(info, IE0, info->ie0_value); /* disable tx data interrupts */
4351
4352 info->tx_enabled = 0;
4353 info->tx_active = 0;
4354 }
4355
4356 /* Fill the transmit FIFO until the FIFO is full or
4357 * there is no more data to load.
4358 */
4359 void tx_load_fifo(SLMP_INFO *info)
4360 {
4361 u8 TwoBytes[2];
4362
4363 /* do nothing is now tx data available and no XON/XOFF pending */
4364
4365 if ( !info->tx_count && !info->x_char )
4366 return;
4367
4368 /* load the Transmit FIFO until FIFOs full or all data sent */
4369
4370 while( info->tx_count && (read_reg(info,SR0) & BIT1) ) {
4371
4372 /* there is more space in the transmit FIFO and */
4373 /* there is more data in transmit buffer */
4374
4375 if ( (info->tx_count > 1) && !info->x_char ) {
4376 /* write 16-bits */
4377 TwoBytes[0] = info->tx_buf[info->tx_get++];
4378 if (info->tx_get >= info->max_frame_size)
4379 info->tx_get -= info->max_frame_size;
4380 TwoBytes[1] = info->tx_buf[info->tx_get++];
4381 if (info->tx_get >= info->max_frame_size)
4382 info->tx_get -= info->max_frame_size;
4383
4384 write_reg16(info, TRB, *((u16 *)TwoBytes));
4385
4386 info->tx_count -= 2;
4387 info->icount.tx += 2;
4388 } else {
4389 /* only 1 byte left to transmit or 1 FIFO slot left */
4390
4391 if (info->x_char) {
4392 /* transmit pending high priority char */
4393 write_reg(info, TRB, info->x_char);
4394 info->x_char = 0;
4395 } else {
4396 write_reg(info, TRB, info->tx_buf[info->tx_get++]);
4397 if (info->tx_get >= info->max_frame_size)
4398 info->tx_get -= info->max_frame_size;
4399 info->tx_count--;
4400 }
4401 info->icount.tx++;
4402 }
4403 }
4404 }
4405
4406 /* Reset a port to a known state
4407 */
4408 void reset_port(SLMP_INFO *info)
4409 {
4410 if (info->sca_base) {
4411
4412 tx_stop(info);
4413 rx_stop(info);
4414
4415 info->serial_signals &= ~(SerialSignal_DTR + SerialSignal_RTS);
4416 set_signals(info);
4417
4418 /* disable all port interrupts */
4419 info->ie0_value = 0;
4420 info->ie1_value = 0;
4421 info->ie2_value = 0;
4422 write_reg(info, IE0, info->ie0_value);
4423 write_reg(info, IE1, info->ie1_value);
4424 write_reg(info, IE2, info->ie2_value);
4425
4426 write_reg(info, CMD, CHRESET);
4427 }
4428 }
4429
4430 /* Reset all the ports to a known state.
4431 */
4432 void reset_adapter(SLMP_INFO *info)
4433 {
4434 int i;
4435
4436 for ( i=0; i < SCA_MAX_PORTS; ++i) {
4437 if (info->port_array[i])
4438 reset_port(info->port_array[i]);
4439 }
4440 }
4441
4442 /* Program port for asynchronous communications.
4443 */
4444 void async_mode(SLMP_INFO *info)
4445 {
4446
4447 unsigned char RegValue;
4448
4449 tx_stop(info);
4450 rx_stop(info);
4451
4452 /* MD0, Mode Register 0
4453 *
4454 * 07..05 PRCTL<2..0>, Protocol Mode, 000=async
4455 * 04 AUTO, Auto-enable (RTS/CTS/DCD)
4456 * 03 Reserved, must be 0
4457 * 02 CRCCC, CRC Calculation, 0=disabled
4458 * 01..00 STOP<1..0> Stop bits (00=1,10=2)
4459 *
4460 * 0000 0000
4461 */
4462 RegValue = 0x00;
4463 if (info->params.stop_bits != 1)
4464 RegValue |= BIT1;
4465 write_reg(info, MD0, RegValue);
4466
4467 /* MD1, Mode Register 1
4468 *
4469 * 07..06 BRATE<1..0>, bit rate, 00=1/1 01=1/16 10=1/32 11=1/64
4470 * 05..04 TXCHR<1..0>, tx char size, 00=8 bits,01=7,10=6,11=5
4471 * 03..02 RXCHR<1..0>, rx char size
4472 * 01..00 PMPM<1..0>, Parity mode, 00=none 10=even 11=odd
4473 *
4474 * 0100 0000
4475 */
4476 RegValue = 0x40;
4477 switch (info->params.data_bits) {
4478 case 7: RegValue |= BIT4 + BIT2; break;
4479 case 6: RegValue |= BIT5 + BIT3; break;
4480 case 5: RegValue |= BIT5 + BIT4 + BIT3 + BIT2; break;
4481 }
4482 if (info->params.parity != ASYNC_PARITY_NONE) {
4483 RegValue |= BIT1;
4484 if (info->params.parity == ASYNC_PARITY_ODD)
4485 RegValue |= BIT0;
4486 }
4487 write_reg(info, MD1, RegValue);
4488
4489 /* MD2, Mode Register 2
4490 *
4491 * 07..02 Reserved, must be 0
4492 * 01..00 CNCT<1..0> Channel connection, 0=normal
4493 *
4494 * 0000 0000
4495 */
4496 RegValue = 0x00;
4497 write_reg(info, MD2, RegValue);
4498
4499 /* RXS, Receive clock source
4500 *
4501 * 07 Reserved, must be 0
4502 * 06..04 RXCS<2..0>, clock source, 000=RxC Pin, 100=BRG, 110=DPLL
4503 * 03..00 RXBR<3..0>, rate divisor, 0000=1
4504 */
4505 RegValue=BIT6;
4506 write_reg(info, RXS, RegValue);
4507
4508 /* TXS, Transmit clock source
4509 *
4510 * 07 Reserved, must be 0
4511 * 06..04 RXCS<2..0>, clock source, 000=TxC Pin, 100=BRG, 110=Receive Clock
4512 * 03..00 RXBR<3..0>, rate divisor, 0000=1
4513 */
4514 RegValue=BIT6;
4515 write_reg(info, TXS, RegValue);
4516
4517 /* Control Register
4518 *
4519 * 6,4,2,0 CLKSEL<3..0>, 0 = TcCLK in, 1 = Auxclk out
4520 */
4521 info->port_array[0]->ctrlreg_value |= (BIT0 << (info->port_num * 2));
4522 write_control_reg(info);
4523
4524 tx_set_idle(info);
4525
4526 /* RRC Receive Ready Control 0
4527 *
4528 * 07..05 Reserved, must be 0
4529 * 04..00 RRC<4..0> Rx FIFO trigger active 0x00 = 1 byte
4530 */
4531 write_reg(info, RRC, 0x00);
4532
4533 /* TRC0 Transmit Ready Control 0
4534 *
4535 * 07..05 Reserved, must be 0
4536 * 04..00 TRC<4..0> Tx FIFO trigger active 0x10 = 16 bytes
4537 */
4538 write_reg(info, TRC0, 0x10);
4539
4540 /* TRC1 Transmit Ready Control 1
4541 *
4542 * 07..05 Reserved, must be 0
4543 * 04..00 TRC<4..0> Tx FIFO trigger inactive 0x1e = 31 bytes (full-1)
4544 */
4545 write_reg(info, TRC1, 0x1e);
4546
4547 /* CTL, MSCI control register
4548 *
4549 * 07..06 Reserved, set to 0
4550 * 05 UDRNC, underrun control, 0=abort 1=CRC+flag (HDLC/BSC)
4551 * 04 IDLC, idle control, 0=mark 1=idle register
4552 * 03 BRK, break, 0=off 1 =on (async)
4553 * 02 SYNCLD, sync char load enable (BSC) 1=enabled
4554 * 01 GOP, go active on poll (LOOP mode) 1=enabled
4555 * 00 RTS, RTS output control, 0=active 1=inactive
4556 *
4557 * 0001 0001
4558 */
4559 RegValue = 0x10;
4560 if (!(info->serial_signals & SerialSignal_RTS))
4561 RegValue |= 0x01;
4562 write_reg(info, CTL, RegValue);
4563
4564 /* enable status interrupts */
4565 info->ie0_value |= TXINTE + RXINTE;
4566 write_reg(info, IE0, info->ie0_value);
4567
4568 /* enable break detect interrupt */
4569 info->ie1_value = BRKD;
4570 write_reg(info, IE1, info->ie1_value);
4571
4572 /* enable rx overrun interrupt */
4573 info->ie2_value = OVRN;
4574 write_reg(info, IE2, info->ie2_value);
4575
4576 set_rate( info, info->params.data_rate * 16 );
4577
4578 if (info->params.loopback)
4579 enable_loopback(info,1);
4580 }
4581
4582 /* Program the SCA for HDLC communications.
4583 */
4584 void hdlc_mode(SLMP_INFO *info)
4585 {
4586 unsigned char RegValue;
4587 u32 DpllDivisor;
4588
4589 // Can't use DPLL because SCA outputs recovered clock on RxC when
4590 // DPLL mode selected. This causes output contention with RxC receiver.
4591 // Use of DPLL would require external hardware to disable RxC receiver
4592 // when DPLL mode selected.
4593 info->params.flags &= ~(HDLC_FLAG_TXC_DPLL + HDLC_FLAG_RXC_DPLL);
4594
4595 /* disable DMA interrupts */
4596 write_reg(info, TXDMA + DIR, 0);
4597 write_reg(info, RXDMA + DIR, 0);
4598
4599 /* MD0, Mode Register 0
4600 *
4601 * 07..05 PRCTL<2..0>, Protocol Mode, 100=HDLC
4602 * 04 AUTO, Auto-enable (RTS/CTS/DCD)
4603 * 03 Reserved, must be 0
4604 * 02 CRCCC, CRC Calculation, 1=enabled
4605 * 01 CRC1, CRC selection, 0=CRC-16,1=CRC-CCITT-16
4606 * 00 CRC0, CRC initial value, 1 = all 1s
4607 *
4608 * 1000 0001
4609 */
4610 RegValue = 0x81;
4611 if (info->params.flags & HDLC_FLAG_AUTO_CTS)
4612 RegValue |= BIT4;
4613 if (info->params.flags & HDLC_FLAG_AUTO_DCD)
4614 RegValue |= BIT4;
4615 if (info->params.crc_type == HDLC_CRC_16_CCITT)
4616 RegValue |= BIT2 + BIT1;
4617 write_reg(info, MD0, RegValue);
4618
4619 /* MD1, Mode Register 1
4620 *
4621 * 07..06 ADDRS<1..0>, Address detect, 00=no addr check
4622 * 05..04 TXCHR<1..0>, tx char size, 00=8 bits
4623 * 03..02 RXCHR<1..0>, rx char size, 00=8 bits
4624 * 01..00 PMPM<1..0>, Parity mode, 00=no parity
4625 *
4626 * 0000 0000
4627 */
4628 RegValue = 0x00;
4629 write_reg(info, MD1, RegValue);
4630
4631 /* MD2, Mode Register 2
4632 *
4633 * 07 NRZFM, 0=NRZ, 1=FM
4634 * 06..05 CODE<1..0> Encoding, 00=NRZ
4635 * 04..03 DRATE<1..0> DPLL Divisor, 00=8
4636 * 02 Reserved, must be 0
4637 * 01..00 CNCT<1..0> Channel connection, 0=normal
4638 *
4639 * 0000 0000
4640 */
4641 RegValue = 0x00;
4642 switch(info->params.encoding) {
4643 case HDLC_ENCODING_NRZI: RegValue |= BIT5; break;
4644 case HDLC_ENCODING_BIPHASE_MARK: RegValue |= BIT7 + BIT5; break; /* aka FM1 */
4645 case HDLC_ENCODING_BIPHASE_SPACE: RegValue |= BIT7 + BIT6; break; /* aka FM0 */
4646 case HDLC_ENCODING_BIPHASE_LEVEL: RegValue |= BIT7; break; /* aka Manchester */
4647 #if 0
4648 case HDLC_ENCODING_NRZB: /* not supported */
4649 case HDLC_ENCODING_NRZI_MARK: /* not supported */
4650 case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: /* not supported */
4651 #endif
4652 }
4653 if ( info->params.flags & HDLC_FLAG_DPLL_DIV16 ) {
4654 DpllDivisor = 16;
4655 RegValue |= BIT3;
4656 } else if ( info->params.flags & HDLC_FLAG_DPLL_DIV8 ) {
4657 DpllDivisor = 8;
4658 } else {
4659 DpllDivisor = 32;
4660 RegValue |= BIT4;
4661 }
4662 write_reg(info, MD2, RegValue);
4663
4664
4665 /* RXS, Receive clock source
4666 *
4667 * 07 Reserved, must be 0
4668 * 06..04 RXCS<2..0>, clock source, 000=RxC Pin, 100=BRG, 110=DPLL
4669 * 03..00 RXBR<3..0>, rate divisor, 0000=1
4670 */
4671 RegValue=0;
4672 if (info->params.flags & HDLC_FLAG_RXC_BRG)
4673 RegValue |= BIT6;
4674 if (info->params.flags & HDLC_FLAG_RXC_DPLL)
4675 RegValue |= BIT6 + BIT5;
4676 write_reg(info, RXS, RegValue);
4677
4678 /* TXS, Transmit clock source
4679 *
4680 * 07 Reserved, must be 0
4681 * 06..04 RXCS<2..0>, clock source, 000=TxC Pin, 100=BRG, 110=Receive Clock
4682 * 03..00 RXBR<3..0>, rate divisor, 0000=1
4683 */
4684 RegValue=0;
4685 if (info->params.flags & HDLC_FLAG_TXC_BRG)
4686 RegValue |= BIT6;
4687 if (info->params.flags & HDLC_FLAG_TXC_DPLL)
4688 RegValue |= BIT6 + BIT5;
4689 write_reg(info, TXS, RegValue);
4690
4691 if (info->params.flags & HDLC_FLAG_RXC_DPLL)
4692 set_rate(info, info->params.clock_speed * DpllDivisor);
4693 else
4694 set_rate(info, info->params.clock_speed);
4695
4696 /* GPDATA (General Purpose I/O Data Register)
4697 *
4698 * 6,4,2,0 CLKSEL<3..0>, 0 = TcCLK in, 1 = Auxclk out
4699 */
4700 if (info->params.flags & HDLC_FLAG_TXC_BRG)
4701 info->port_array[0]->ctrlreg_value |= (BIT0 << (info->port_num * 2));
4702 else
4703 info->port_array[0]->ctrlreg_value &= ~(BIT0 << (info->port_num * 2));
4704 write_control_reg(info);
4705
4706 /* RRC Receive Ready Control 0
4707 *
4708 * 07..05 Reserved, must be 0
4709 * 04..00 RRC<4..0> Rx FIFO trigger active
4710 */
4711 write_reg(info, RRC, rx_active_fifo_level);
4712
4713 /* TRC0 Transmit Ready Control 0
4714 *
4715 * 07..05 Reserved, must be 0
4716 * 04..00 TRC<4..0> Tx FIFO trigger active
4717 */
4718 write_reg(info, TRC0, tx_active_fifo_level);
4719
4720 /* TRC1 Transmit Ready Control 1
4721 *
4722 * 07..05 Reserved, must be 0
4723 * 04..00 TRC<4..0> Tx FIFO trigger inactive 0x1f = 32 bytes (full)
4724 */
4725 write_reg(info, TRC1, (unsigned char)(tx_negate_fifo_level - 1));
4726
4727 /* DMR, DMA Mode Register
4728 *
4729 * 07..05 Reserved, must be 0
4730 * 04 TMOD, Transfer Mode: 1=chained-block
4731 * 03 Reserved, must be 0
4732 * 02 NF, Number of Frames: 1=multi-frame
4733 * 01 CNTE, Frame End IRQ Counter enable: 0=disabled
4734 * 00 Reserved, must be 0
4735 *
4736 * 0001 0100
4737 */
4738 write_reg(info, TXDMA + DMR, 0x14);
4739 write_reg(info, RXDMA + DMR, 0x14);
4740
4741 /* Set chain pointer base (upper 8 bits of 24 bit addr) */
4742 write_reg(info, RXDMA + CPB,
4743 (unsigned char)(info->buffer_list_phys >> 16));
4744
4745 /* Set chain pointer base (upper 8 bits of 24 bit addr) */
4746 write_reg(info, TXDMA + CPB,
4747 (unsigned char)(info->buffer_list_phys >> 16));
4748
4749 /* enable status interrupts. other code enables/disables
4750 * the individual sources for these two interrupt classes.
4751 */
4752 info->ie0_value |= TXINTE + RXINTE;
4753 write_reg(info, IE0, info->ie0_value);
4754
4755 /* CTL, MSCI control register
4756 *
4757 * 07..06 Reserved, set to 0
4758 * 05 UDRNC, underrun control, 0=abort 1=CRC+flag (HDLC/BSC)
4759 * 04 IDLC, idle control, 0=mark 1=idle register
4760 * 03 BRK, break, 0=off 1 =on (async)
4761 * 02 SYNCLD, sync char load enable (BSC) 1=enabled
4762 * 01 GOP, go active on poll (LOOP mode) 1=enabled
4763 * 00 RTS, RTS output control, 0=active 1=inactive
4764 *
4765 * 0001 0001
4766 */
4767 RegValue = 0x10;
4768 if (!(info->serial_signals & SerialSignal_RTS))
4769 RegValue |= 0x01;
4770 write_reg(info, CTL, RegValue);
4771
4772 /* preamble not supported ! */
4773
4774 tx_set_idle(info);
4775 tx_stop(info);
4776 rx_stop(info);
4777
4778 set_rate(info, info->params.clock_speed);
4779
4780 if (info->params.loopback)
4781 enable_loopback(info,1);
4782 }
4783
4784 /* Set the transmit HDLC idle mode
4785 */
4786 void tx_set_idle(SLMP_INFO *info)
4787 {
4788 unsigned char RegValue = 0xff;
4789
4790 /* Map API idle mode to SCA register bits */
4791 switch(info->idle_mode) {
4792 case HDLC_TXIDLE_FLAGS: RegValue = 0x7e; break;
4793 case HDLC_TXIDLE_ALT_ZEROS_ONES: RegValue = 0xaa; break;
4794 case HDLC_TXIDLE_ZEROS: RegValue = 0x00; break;
4795 case HDLC_TXIDLE_ONES: RegValue = 0xff; break;
4796 case HDLC_TXIDLE_ALT_MARK_SPACE: RegValue = 0xaa; break;
4797 case HDLC_TXIDLE_SPACE: RegValue = 0x00; break;
4798 case HDLC_TXIDLE_MARK: RegValue = 0xff; break;
4799 }
4800
4801 write_reg(info, IDL, RegValue);
4802 }
4803
4804 /* Query the adapter for the state of the V24 status (input) signals.
4805 */
4806 void get_signals(SLMP_INFO *info)
4807 {
4808 u16 status = read_reg(info, SR3);
4809 u16 gpstatus = read_status_reg(info);
4810 u16 testbit;
4811
4812 /* clear all serial signals except DTR and RTS */
4813 info->serial_signals &= SerialSignal_DTR + SerialSignal_RTS;
4814
4815 /* set serial signal bits to reflect MISR */
4816
4817 if (!(status & BIT3))
4818 info->serial_signals |= SerialSignal_CTS;
4819
4820 if ( !(status & BIT2))
4821 info->serial_signals |= SerialSignal_DCD;
4822
4823 testbit = BIT1 << (info->port_num * 2); // Port 0..3 RI is GPDATA<1,3,5,7>
4824 if (!(gpstatus & testbit))
4825 info->serial_signals |= SerialSignal_RI;
4826
4827 testbit = BIT0 << (info->port_num * 2); // Port 0..3 DSR is GPDATA<0,2,4,6>
4828 if (!(gpstatus & testbit))
4829 info->serial_signals |= SerialSignal_DSR;
4830 }
4831
4832 /* Set the state of DTR and RTS based on contents of
4833 * serial_signals member of device context.
4834 */
4835 void set_signals(SLMP_INFO *info)
4836 {
4837 unsigned char RegValue;
4838 u16 EnableBit;
4839
4840 RegValue = read_reg(info, CTL);
4841 if (info->serial_signals & SerialSignal_RTS)
4842 RegValue &= ~BIT0;
4843 else
4844 RegValue |= BIT0;
4845 write_reg(info, CTL, RegValue);
4846
4847 // Port 0..3 DTR is ctrl reg <1,3,5,7>
4848 EnableBit = BIT1 << (info->port_num*2);
4849 if (info->serial_signals & SerialSignal_DTR)
4850 info->port_array[0]->ctrlreg_value &= ~EnableBit;
4851 else
4852 info->port_array[0]->ctrlreg_value |= EnableBit;
4853 write_control_reg(info);
4854 }
4855
4856 /*******************/
4857 /* DMA Buffer Code */
4858 /*******************/
4859
4860 /* Set the count for all receive buffers to SCABUFSIZE
4861 * and set the current buffer to the first buffer. This effectively
4862 * makes all buffers free and discards any data in buffers.
4863 */
4864 void rx_reset_buffers(SLMP_INFO *info)
4865 {
4866 rx_free_frame_buffers(info, 0, info->rx_buf_count - 1);
4867 }
4868
4869 /* Free the buffers used by a received frame
4870 *
4871 * info pointer to device instance data
4872 * first index of 1st receive buffer of frame
4873 * last index of last receive buffer of frame
4874 */
4875 void rx_free_frame_buffers(SLMP_INFO *info, unsigned int first, unsigned int last)
4876 {
4877 int done = 0;
4878
4879 while(!done) {
4880 /* reset current buffer for reuse */
4881 info->rx_buf_list[first].status = 0xff;
4882
4883 if (first == last) {
4884 done = 1;
4885 /* set new last rx descriptor address */
4886 write_reg16(info, RXDMA + EDA, info->rx_buf_list_ex[first].phys_entry);
4887 }
4888
4889 first++;
4890 if (first == info->rx_buf_count)
4891 first = 0;
4892 }
4893
4894 /* set current buffer to next buffer after last buffer of frame */
4895 info->current_rx_buf = first;
4896 }
4897
4898 /* Return a received frame from the receive DMA buffers.
4899 * Only frames received without errors are returned.
4900 *
4901 * Return Value: 1 if frame returned, otherwise 0
4902 */
4903 int rx_get_frame(SLMP_INFO *info)
4904 {
4905 unsigned int StartIndex, EndIndex; /* index of 1st and last buffers of Rx frame */
4906 unsigned short status;
4907 unsigned int framesize = 0;
4908 int ReturnCode = 0;
4909 unsigned long flags;
4910 struct tty_struct *tty = info->tty;
4911 unsigned char addr_field = 0xff;
4912 SCADESC *desc;
4913 SCADESC_EX *desc_ex;
4914
4915 CheckAgain:
4916 /* assume no frame returned, set zero length */
4917 framesize = 0;
4918 addr_field = 0xff;
4919
4920 /*
4921 * current_rx_buf points to the 1st buffer of the next available
4922 * receive frame. To find the last buffer of the frame look for
4923 * a non-zero status field in the buffer entries. (The status
4924 * field is set by the 16C32 after completing a receive frame.
4925 */
4926 StartIndex = EndIndex = info->current_rx_buf;
4927
4928 for ( ;; ) {
4929 desc = &info->rx_buf_list[EndIndex];
4930 desc_ex = &info->rx_buf_list_ex[EndIndex];
4931
4932 if (desc->status == 0xff)
4933 goto Cleanup; /* current desc still in use, no frames available */
4934
4935 if (framesize == 0 && info->params.addr_filter != 0xff)
4936 addr_field = desc_ex->virt_addr[0];
4937
4938 framesize += desc->length;
4939
4940 /* Status != 0 means last buffer of frame */
4941 if (desc->status)
4942 break;
4943
4944 EndIndex++;
4945 if (EndIndex == info->rx_buf_count)
4946 EndIndex = 0;
4947
4948 if (EndIndex == info->current_rx_buf) {
4949 /* all buffers have been 'used' but none mark */
4950 /* the end of a frame. Reset buffers and receiver. */
4951 if ( info->rx_enabled ){
4952 spin_lock_irqsave(&info->lock,flags);
4953 rx_start(info);
4954 spin_unlock_irqrestore(&info->lock,flags);
4955 }
4956 goto Cleanup;
4957 }
4958
4959 }
4960
4961 /* check status of receive frame */
4962
4963 /* frame status is byte stored after frame data
4964 *
4965 * 7 EOM (end of msg), 1 = last buffer of frame
4966 * 6 Short Frame, 1 = short frame
4967 * 5 Abort, 1 = frame aborted
4968 * 4 Residue, 1 = last byte is partial
4969 * 3 Overrun, 1 = overrun occurred during frame reception
4970 * 2 CRC, 1 = CRC error detected
4971 *
4972 */
4973 status = desc->status;
4974
4975 /* ignore CRC bit if not using CRC (bit is undefined) */
4976 /* Note:CRC is not save to data buffer */
4977 if (info->params.crc_type == HDLC_CRC_NONE)
4978 status &= ~BIT2;
4979
4980 if (framesize == 0 ||
4981 (addr_field != 0xff && addr_field != info->params.addr_filter)) {
4982 /* discard 0 byte frames, this seems to occur sometime
4983 * when remote is idling flags.
4984 */
4985 rx_free_frame_buffers(info, StartIndex, EndIndex);
4986 goto CheckAgain;
4987 }
4988
4989 if (framesize < 2)
4990 status |= BIT6;
4991
4992 if (status & (BIT6+BIT5+BIT3+BIT2)) {
4993 /* received frame has errors,
4994 * update counts and mark frame size as 0
4995 */
4996 if (status & BIT6)
4997 info->icount.rxshort++;
4998 else if (status & BIT5)
4999 info->icount.rxabort++;
5000 else if (status & BIT3)
5001 info->icount.rxover++;
5002 else
5003 info->icount.rxcrc++;
5004
5005 framesize = 0;
5006 #ifdef CONFIG_HDLC
5007 {
5008 struct net_device_stats *stats = hdlc_stats(info->netdev);
5009 stats->rx_errors++;
5010 stats->rx_frame_errors++;
5011 }
5012 #endif
5013 }
5014
5015 if ( debug_level >= DEBUG_LEVEL_BH )
5016 printk("%s(%d):%s rx_get_frame() status=%04X size=%d\n",
5017 __FILE__,__LINE__,info->device_name,status,framesize);
5018
5019 if ( debug_level >= DEBUG_LEVEL_DATA )
5020 trace_block(info,info->rx_buf_list_ex[StartIndex].virt_addr,
5021 min_t(int, framesize,SCABUFSIZE),0);
5022
5023 if (framesize) {
5024 if (framesize > info->max_frame_size)
5025 info->icount.rxlong++;
5026 else {
5027 /* copy dma buffer(s) to contiguous intermediate buffer */
5028 int copy_count = framesize;
5029 int index = StartIndex;
5030 unsigned char *ptmp = info->tmp_rx_buf;
5031 info->tmp_rx_buf_count = framesize;
5032
5033 info->icount.rxok++;
5034
5035 while(copy_count) {
5036 int partial_count = min(copy_count,SCABUFSIZE);
5037 memcpy( ptmp,
5038 info->rx_buf_list_ex[index].virt_addr,
5039 partial_count );
5040 ptmp += partial_count;
5041 copy_count -= partial_count;
5042
5043 if ( ++index == info->rx_buf_count )
5044 index = 0;
5045 }
5046
5047 #ifdef CONFIG_HDLC
5048 if (info->netcount)
5049 hdlcdev_rx(info,info->tmp_rx_buf,framesize);
5050 else
5051 #endif
5052 ldisc_receive_buf(tty,info->tmp_rx_buf,
5053 info->flag_buf, framesize);
5054 }
5055 }
5056 /* Free the buffers used by this frame. */
5057 rx_free_frame_buffers( info, StartIndex, EndIndex );
5058
5059 ReturnCode = 1;
5060
5061 Cleanup:
5062 if ( info->rx_enabled && info->rx_overflow ) {
5063 /* Receiver is enabled, but needs to restarted due to
5064 * rx buffer overflow. If buffers are empty, restart receiver.
5065 */
5066 if (info->rx_buf_list[EndIndex].status == 0xff) {
5067 spin_lock_irqsave(&info->lock,flags);
5068 rx_start(info);
5069 spin_unlock_irqrestore(&info->lock,flags);
5070 }
5071 }
5072
5073 return ReturnCode;
5074 }
5075
5076 /* load the transmit DMA buffer with data
5077 */
5078 void tx_load_dma_buffer(SLMP_INFO *info, const char *buf, unsigned int count)
5079 {
5080 unsigned short copy_count;
5081 unsigned int i = 0;
5082 SCADESC *desc;
5083 SCADESC_EX *desc_ex;
5084
5085 if ( debug_level >= DEBUG_LEVEL_DATA )
5086 trace_block(info,buf, min_t(int, count,SCABUFSIZE), 1);
5087
5088 /* Copy source buffer to one or more DMA buffers, starting with
5089 * the first transmit dma buffer.
5090 */
5091 for(i=0;;)
5092 {
5093 copy_count = min_t(unsigned short,count,SCABUFSIZE);
5094
5095 desc = &info->tx_buf_list[i];
5096 desc_ex = &info->tx_buf_list_ex[i];
5097
5098 load_pci_memory(info, desc_ex->virt_addr,buf,copy_count);
5099
5100 desc->length = copy_count;
5101 desc->status = 0;
5102
5103 buf += copy_count;
5104 count -= copy_count;
5105
5106 if (!count)
5107 break;
5108
5109 i++;
5110 if (i >= info->tx_buf_count)
5111 i = 0;
5112 }
5113
5114 info->tx_buf_list[i].status = 0x81; /* set EOM and EOT status */
5115 info->last_tx_buf = ++i;
5116 }
5117
5118 int register_test(SLMP_INFO *info)
5119 {
5120 static unsigned char testval[] = {0x00, 0xff, 0xaa, 0x55, 0x69, 0x96};
5121 static unsigned int count = sizeof(testval)/sizeof(unsigned char);
5122 unsigned int i;
5123 int rc = TRUE;
5124 unsigned long flags;
5125
5126 spin_lock_irqsave(&info->lock,flags);
5127 reset_port(info);
5128
5129 /* assume failure */
5130 info->init_error = DiagStatus_AddressFailure;
5131
5132 /* Write bit patterns to various registers but do it out of */
5133 /* sync, then read back and verify values. */
5134
5135 for (i = 0 ; i < count ; i++) {
5136 write_reg(info, TMC, testval[i]);
5137 write_reg(info, IDL, testval[(i+1)%count]);
5138 write_reg(info, SA0, testval[(i+2)%count]);
5139 write_reg(info, SA1, testval[(i+3)%count]);
5140
5141 if ( (read_reg(info, TMC) != testval[i]) ||
5142 (read_reg(info, IDL) != testval[(i+1)%count]) ||
5143 (read_reg(info, SA0) != testval[(i+2)%count]) ||
5144 (read_reg(info, SA1) != testval[(i+3)%count]) )
5145 {
5146 rc = FALSE;
5147 break;
5148 }
5149 }
5150
5151 reset_port(info);
5152 spin_unlock_irqrestore(&info->lock,flags);
5153
5154 return rc;
5155 }
5156
5157 int irq_test(SLMP_INFO *info)
5158 {
5159 unsigned long timeout;
5160 unsigned long flags;
5161
5162 unsigned char timer = (info->port_num & 1) ? TIMER2 : TIMER0;
5163
5164 spin_lock_irqsave(&info->lock,flags);
5165 reset_port(info);
5166
5167 /* assume failure */
5168 info->init_error = DiagStatus_IrqFailure;
5169 info->irq_occurred = FALSE;
5170
5171 /* setup timer0 on SCA0 to interrupt */
5172
5173 /* IER2<7..4> = timer<3..0> interrupt enables (1=enabled) */
5174 write_reg(info, IER2, (unsigned char)((info->port_num & 1) ? BIT6 : BIT4));
5175
5176 write_reg(info, (unsigned char)(timer + TEPR), 0); /* timer expand prescale */
5177 write_reg16(info, (unsigned char)(timer + TCONR), 1); /* timer constant */
5178
5179
5180 /* TMCS, Timer Control/Status Register
5181 *
5182 * 07 CMF, Compare match flag (read only) 1=match
5183 * 06 ECMI, CMF Interrupt Enable: 1=enabled
5184 * 05 Reserved, must be 0
5185 * 04 TME, Timer Enable
5186 * 03..00 Reserved, must be 0
5187 *
5188 * 0101 0000
5189 */
5190 write_reg(info, (unsigned char)(timer + TMCS), 0x50);
5191
5192 spin_unlock_irqrestore(&info->lock,flags);
5193
5194 timeout=100;
5195 while( timeout-- && !info->irq_occurred ) {
5196 msleep_interruptible(10);
5197 }
5198
5199 spin_lock_irqsave(&info->lock,flags);
5200 reset_port(info);
5201 spin_unlock_irqrestore(&info->lock,flags);
5202
5203 return info->irq_occurred;
5204 }
5205
5206 /* initialize individual SCA device (2 ports)
5207 */
5208 static int sca_init(SLMP_INFO *info)
5209 {
5210 /* set wait controller to single mem partition (low), no wait states */
5211 write_reg(info, PABR0, 0); /* wait controller addr boundary 0 */
5212 write_reg(info, PABR1, 0); /* wait controller addr boundary 1 */
5213 write_reg(info, WCRL, 0); /* wait controller low range */
5214 write_reg(info, WCRM, 0); /* wait controller mid range */
5215 write_reg(info, WCRH, 0); /* wait controller high range */
5216
5217 /* DPCR, DMA Priority Control
5218 *
5219 * 07..05 Not used, must be 0
5220 * 04 BRC, bus release condition: 0=all transfers complete
5221 * 03 CCC, channel change condition: 0=every cycle
5222 * 02..00 PR<2..0>, priority 100=round robin
5223 *
5224 * 00000100 = 0x04
5225 */
5226 write_reg(info, DPCR, dma_priority);
5227
5228 /* DMA Master Enable, BIT7: 1=enable all channels */
5229 write_reg(info, DMER, 0x80);
5230
5231 /* enable all interrupt classes */
5232 write_reg(info, IER0, 0xff); /* TxRDY,RxRDY,TxINT,RxINT (ports 0-1) */
5233 write_reg(info, IER1, 0xff); /* DMIB,DMIA (channels 0-3) */
5234 write_reg(info, IER2, 0xf0); /* TIRQ (timers 0-3) */
5235
5236 /* ITCR, interrupt control register
5237 * 07 IPC, interrupt priority, 0=MSCI->DMA
5238 * 06..05 IAK<1..0>, Acknowledge cycle, 00=non-ack cycle
5239 * 04 VOS, Vector Output, 0=unmodified vector
5240 * 03..00 Reserved, must be 0
5241 */
5242 write_reg(info, ITCR, 0);
5243
5244 return TRUE;
5245 }
5246
5247 /* initialize adapter hardware
5248 */
5249 int init_adapter(SLMP_INFO *info)
5250 {
5251 int i;
5252
5253 /* Set BIT30 of Local Control Reg 0x50 to reset SCA */
5254 volatile u32 *MiscCtrl = (u32 *)(info->lcr_base + 0x50);
5255 u32 readval;
5256
5257 info->misc_ctrl_value |= BIT30;
5258 *MiscCtrl = info->misc_ctrl_value;
5259
5260 /*
5261 * Force at least 170ns delay before clearing
5262 * reset bit. Each read from LCR takes at least
5263 * 30ns so 10 times for 300ns to be safe.
5264 */
5265 for(i=0;i<10;i++)
5266 readval = *MiscCtrl;
5267
5268 info->misc_ctrl_value &= ~BIT30;
5269 *MiscCtrl = info->misc_ctrl_value;
5270
5271 /* init control reg (all DTRs off, all clksel=input) */
5272 info->ctrlreg_value = 0xaa;
5273 write_control_reg(info);
5274
5275 {
5276 volatile u32 *LCR1BRDR = (u32 *)(info->lcr_base + 0x2c);
5277 lcr1_brdr_value &= ~(BIT5 + BIT4 + BIT3);
5278
5279 switch(read_ahead_count)
5280 {
5281 case 16:
5282 lcr1_brdr_value |= BIT5 + BIT4 + BIT3;
5283 break;
5284 case 8:
5285 lcr1_brdr_value |= BIT5 + BIT4;
5286 break;
5287 case 4:
5288 lcr1_brdr_value |= BIT5 + BIT3;
5289 break;
5290 case 0:
5291 lcr1_brdr_value |= BIT5;
5292 break;
5293 }
5294
5295 *LCR1BRDR = lcr1_brdr_value;
5296 *MiscCtrl = misc_ctrl_value;
5297 }
5298
5299 sca_init(info->port_array[0]);
5300 sca_init(info->port_array[2]);
5301
5302 return TRUE;
5303 }
5304
5305 /* Loopback an HDLC frame to test the hardware
5306 * interrupt and DMA functions.
5307 */
5308 int loopback_test(SLMP_INFO *info)
5309 {
5310 #define TESTFRAMESIZE 20
5311
5312 unsigned long timeout;
5313 u16 count = TESTFRAMESIZE;
5314 unsigned char buf[TESTFRAMESIZE];
5315 int rc = FALSE;
5316 unsigned long flags;
5317
5318 struct tty_struct *oldtty = info->tty;
5319 u32 speed = info->params.clock_speed;
5320
5321 info->params.clock_speed = 3686400;
5322 info->tty = NULL;
5323
5324 /* assume failure */
5325 info->init_error = DiagStatus_DmaFailure;
5326
5327 /* build and send transmit frame */
5328 for (count = 0; count < TESTFRAMESIZE;++count)
5329 buf[count] = (unsigned char)count;
5330
5331 memset(info->tmp_rx_buf,0,TESTFRAMESIZE);
5332
5333 /* program hardware for HDLC and enabled receiver */
5334 spin_lock_irqsave(&info->lock,flags);
5335 hdlc_mode(info);
5336 enable_loopback(info,1);
5337 rx_start(info);
5338 info->tx_count = count;
5339 tx_load_dma_buffer(info,buf,count);
5340 tx_start(info);
5341 spin_unlock_irqrestore(&info->lock,flags);
5342
5343 /* wait for receive complete */
5344 /* Set a timeout for waiting for interrupt. */
5345 for ( timeout = 100; timeout; --timeout ) {
5346 msleep_interruptible(10);
5347
5348 if (rx_get_frame(info)) {
5349 rc = TRUE;
5350 break;
5351 }
5352 }
5353
5354 /* verify received frame length and contents */
5355 if (rc == TRUE &&
5356 ( info->tmp_rx_buf_count != count ||
5357 memcmp(buf, info->tmp_rx_buf,count))) {
5358 rc = FALSE;
5359 }
5360
5361 spin_lock_irqsave(&info->lock,flags);
5362 reset_adapter(info);
5363 spin_unlock_irqrestore(&info->lock,flags);
5364
5365 info->params.clock_speed = speed;
5366 info->tty = oldtty;
5367
5368 return rc;
5369 }
5370
5371 /* Perform diagnostics on hardware
5372 */
5373 int adapter_test( SLMP_INFO *info )
5374 {
5375 unsigned long flags;
5376 if ( debug_level >= DEBUG_LEVEL_INFO )
5377 printk( "%s(%d):Testing device %s\n",
5378 __FILE__,__LINE__,info->device_name );
5379
5380 spin_lock_irqsave(&info->lock,flags);
5381 init_adapter(info);
5382 spin_unlock_irqrestore(&info->lock,flags);
5383
5384 info->port_array[0]->port_count = 0;
5385
5386 if ( register_test(info->port_array[0]) &&
5387 register_test(info->port_array[1])) {
5388
5389 info->port_array[0]->port_count = 2;
5390
5391 if ( register_test(info->port_array[2]) &&
5392 register_test(info->port_array[3]) )
5393 info->port_array[0]->port_count += 2;
5394 }
5395 else {
5396 printk( "%s(%d):Register test failure for device %s Addr=%08lX\n",
5397 __FILE__,__LINE__,info->device_name, (unsigned long)(info->phys_sca_base));
5398 return -ENODEV;
5399 }
5400
5401 if ( !irq_test(info->port_array[0]) ||
5402 !irq_test(info->port_array[1]) ||
5403 (info->port_count == 4 && !irq_test(info->port_array[2])) ||
5404 (info->port_count == 4 && !irq_test(info->port_array[3]))) {
5405 printk( "%s(%d):Interrupt test failure for device %s IRQ=%d\n",
5406 __FILE__,__LINE__,info->device_name, (unsigned short)(info->irq_level) );
5407 return -ENODEV;
5408 }
5409
5410 if (!loopback_test(info->port_array[0]) ||
5411 !loopback_test(info->port_array[1]) ||
5412 (info->port_count == 4 && !loopback_test(info->port_array[2])) ||
5413 (info->port_count == 4 && !loopback_test(info->port_array[3]))) {
5414 printk( "%s(%d):DMA test failure for device %s\n",
5415 __FILE__,__LINE__,info->device_name);
5416 return -ENODEV;
5417 }
5418
5419 if ( debug_level >= DEBUG_LEVEL_INFO )
5420 printk( "%s(%d):device %s passed diagnostics\n",
5421 __FILE__,__LINE__,info->device_name );
5422
5423 info->port_array[0]->init_error = 0;
5424 info->port_array[1]->init_error = 0;
5425 if ( info->port_count > 2 ) {
5426 info->port_array[2]->init_error = 0;
5427 info->port_array[3]->init_error = 0;
5428 }
5429
5430 return 0;
5431 }
5432
5433 /* Test the shared memory on a PCI adapter.
5434 */
5435 int memory_test(SLMP_INFO *info)
5436 {
5437 static unsigned long testval[] = { 0x0, 0x55555555, 0xaaaaaaaa,
5438 0x66666666, 0x99999999, 0xffffffff, 0x12345678 };
5439 unsigned long count = sizeof(testval)/sizeof(unsigned long);
5440 unsigned long i;
5441 unsigned long limit = SCA_MEM_SIZE/sizeof(unsigned long);
5442 unsigned long * addr = (unsigned long *)info->memory_base;
5443
5444 /* Test data lines with test pattern at one location. */
5445
5446 for ( i = 0 ; i < count ; i++ ) {
5447 *addr = testval[i];
5448 if ( *addr != testval[i] )
5449 return FALSE;
5450 }
5451
5452 /* Test address lines with incrementing pattern over */
5453 /* entire address range. */
5454
5455 for ( i = 0 ; i < limit ; i++ ) {
5456 *addr = i * 4;
5457 addr++;
5458 }
5459
5460 addr = (unsigned long *)info->memory_base;
5461
5462 for ( i = 0 ; i < limit ; i++ ) {
5463 if ( *addr != i * 4 )
5464 return FALSE;
5465 addr++;
5466 }
5467
5468 memset( info->memory_base, 0, SCA_MEM_SIZE );
5469 return TRUE;
5470 }
5471
5472 /* Load data into PCI adapter shared memory.
5473 *
5474 * The PCI9050 releases control of the local bus
5475 * after completing the current read or write operation.
5476 *
5477 * While the PCI9050 write FIFO not empty, the
5478 * PCI9050 treats all of the writes as a single transaction
5479 * and does not release the bus. This causes DMA latency problems
5480 * at high speeds when copying large data blocks to the shared memory.
5481 *
5482 * This function breaks a write into multiple transations by
5483 * interleaving a read which flushes the write FIFO and 'completes'
5484 * the write transation. This allows any pending DMA request to gain control
5485 * of the local bus in a timely fasion.
5486 */
5487 void load_pci_memory(SLMP_INFO *info, char* dest, const char* src, unsigned short count)
5488 {
5489 /* A load interval of 16 allows for 4 32-bit writes at */
5490 /* 136ns each for a maximum latency of 542ns on the local bus.*/
5491
5492 unsigned short interval = count / sca_pci_load_interval;
5493 unsigned short i;
5494
5495 for ( i = 0 ; i < interval ; i++ )
5496 {
5497 memcpy(dest, src, sca_pci_load_interval);
5498 read_status_reg(info);
5499 dest += sca_pci_load_interval;
5500 src += sca_pci_load_interval;
5501 }
5502
5503 memcpy(dest, src, count % sca_pci_load_interval);
5504 }
5505
5506 void trace_block(SLMP_INFO *info,const char* data, int count, int xmit)
5507 {
5508 int i;
5509 int linecount;
5510 if (xmit)
5511 printk("%s tx data:\n",info->device_name);
5512 else
5513 printk("%s rx data:\n",info->device_name);
5514
5515 while(count) {
5516 if (count > 16)
5517 linecount = 16;
5518 else
5519 linecount = count;
5520
5521 for(i=0;i<linecount;i++)
5522 printk("%02X ",(unsigned char)data[i]);
5523 for(;i<17;i++)
5524 printk(" ");
5525 for(i=0;i<linecount;i++) {
5526 if (data[i]>=040 && data[i]<=0176)
5527 printk("%c",data[i]);
5528 else
5529 printk(".");
5530 }
5531 printk("\n");
5532
5533 data += linecount;
5534 count -= linecount;
5535 }
5536 } /* end of trace_block() */
5537
5538 /* called when HDLC frame times out
5539 * update stats and do tx completion processing
5540 */
5541 void tx_timeout(unsigned long context)
5542 {
5543 SLMP_INFO *info = (SLMP_INFO*)context;
5544 unsigned long flags;
5545
5546 if ( debug_level >= DEBUG_LEVEL_INFO )
5547 printk( "%s(%d):%s tx_timeout()\n",
5548 __FILE__,__LINE__,info->device_name);
5549 if(info->tx_active && info->params.mode == MGSL_MODE_HDLC) {
5550 info->icount.txtimeout++;
5551 }
5552 spin_lock_irqsave(&info->lock,flags);
5553 info->tx_active = 0;
5554 info->tx_count = info->tx_put = info->tx_get = 0;
5555
5556 spin_unlock_irqrestore(&info->lock,flags);
5557
5558 #ifdef CONFIG_HDLC
5559 if (info->netcount)
5560 hdlcdev_tx_done(info);
5561 else
5562 #endif
5563 bh_transmit(info);
5564 }
5565
5566 /* called to periodically check the DSR/RI modem signal input status
5567 */
5568 void status_timeout(unsigned long context)
5569 {
5570 u16 status = 0;
5571 SLMP_INFO *info = (SLMP_INFO*)context;
5572 unsigned long flags;
5573 unsigned char delta;
5574
5575
5576 spin_lock_irqsave(&info->lock,flags);
5577 get_signals(info);
5578 spin_unlock_irqrestore(&info->lock,flags);
5579
5580 /* check for DSR/RI state change */
5581
5582 delta = info->old_signals ^ info->serial_signals;
5583 info->old_signals = info->serial_signals;
5584
5585 if (delta & SerialSignal_DSR)
5586 status |= MISCSTATUS_DSR_LATCHED|(info->serial_signals&SerialSignal_DSR);
5587
5588 if (delta & SerialSignal_RI)
5589 status |= MISCSTATUS_RI_LATCHED|(info->serial_signals&SerialSignal_RI);
5590
5591 if (delta & SerialSignal_DCD)
5592 status |= MISCSTATUS_DCD_LATCHED|(info->serial_signals&SerialSignal_DCD);
5593
5594 if (delta & SerialSignal_CTS)
5595 status |= MISCSTATUS_CTS_LATCHED|(info->serial_signals&SerialSignal_CTS);
5596
5597 if (status)
5598 isr_io_pin(info,status);
5599
5600 info->status_timer.data = (unsigned long)info;
5601 info->status_timer.function = status_timeout;
5602 info->status_timer.expires = jiffies + msecs_to_jiffies(10);
5603 add_timer(&info->status_timer);
5604 }
5605
5606
5607 /* Register Access Routines -
5608 * All registers are memory mapped
5609 */
5610 #define CALC_REGADDR() \
5611 unsigned char * RegAddr = (unsigned char*)(info->sca_base + Addr); \
5612 if (info->port_num > 1) \
5613 RegAddr += 256; /* port 0-1 SCA0, 2-3 SCA1 */ \
5614 if ( info->port_num & 1) { \
5615 if (Addr > 0x7f) \
5616 RegAddr += 0x40; /* DMA access */ \
5617 else if (Addr > 0x1f && Addr < 0x60) \
5618 RegAddr += 0x20; /* MSCI access */ \
5619 }
5620
5621
5622 unsigned char read_reg(SLMP_INFO * info, unsigned char Addr)
5623 {
5624 CALC_REGADDR();
5625 return *RegAddr;
5626 }
5627 void write_reg(SLMP_INFO * info, unsigned char Addr, unsigned char Value)
5628 {
5629 CALC_REGADDR();
5630 *RegAddr = Value;
5631 }
5632
5633 u16 read_reg16(SLMP_INFO * info, unsigned char Addr)
5634 {
5635 CALC_REGADDR();
5636 return *((u16 *)RegAddr);
5637 }
5638
5639 void write_reg16(SLMP_INFO * info, unsigned char Addr, u16 Value)
5640 {
5641 CALC_REGADDR();
5642 *((u16 *)RegAddr) = Value;
5643 }
5644
5645 unsigned char read_status_reg(SLMP_INFO * info)
5646 {
5647 unsigned char *RegAddr = (unsigned char *)info->statctrl_base;
5648 return *RegAddr;
5649 }
5650
5651 void write_control_reg(SLMP_INFO * info)
5652 {
5653 unsigned char *RegAddr = (unsigned char *)info->statctrl_base;
5654 *RegAddr = info->port_array[0]->ctrlreg_value;
5655 }
5656
5657
5658 static int __devinit synclinkmp_init_one (struct pci_dev *dev,
5659 const struct pci_device_id *ent)
5660 {
5661 if (pci_enable_device(dev)) {
5662 printk("error enabling pci device %p\n", dev);
5663 return -EIO;
5664 }
5665 device_init( ++synclinkmp_adapter_count, dev );
5666 return 0;
5667 }
5668
5669 static void __devexit synclinkmp_remove_one (struct pci_dev *dev)
5670 {
5671 }
Linux 2.6 ibm-acpi/thinkpad-acpi driver git tree