Linux-2.6.12-rc2
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / arch / ppc / platforms / cpci690.c
blob507870c9a97a160e8852b7da45d57fb69b9518a9
1 /*
2 * arch/ppc/platforms/cpci690.c
4 * Board setup routines for the Force CPCI690 board.
6 * Author: Mark A. Greer <mgreer@mvista.com>
8 * 2003 (c) MontaVista Software, Inc. This file is licensed under
9 * the terms of the GNU General Public License version 2. This programr
10 * is licensed "as is" without any warranty of any kind, whether express
11 * or implied.
13 #include <linux/config.h>
14 #include <linux/delay.h>
15 #include <linux/pci.h>
16 #include <linux/ide.h>
17 #include <linux/irq.h>
18 #include <linux/fs.h>
19 #include <linux/seq_file.h>
20 #include <linux/console.h>
21 #include <linux/initrd.h>
22 #include <linux/root_dev.h>
23 #include <linux/mv643xx.h>
24 #include <asm/bootinfo.h>
25 #include <asm/machdep.h>
26 #include <asm/todc.h>
27 #include <asm/time.h>
28 #include <asm/mv64x60.h>
29 #include <platforms/cpci690.h>
31 #define BOARD_VENDOR "Force"
32 #define BOARD_MACHINE "CPCI690"
34 /* Set IDE controllers into Native mode? */
35 #define SET_PCI_IDE_NATIVE
37 static struct mv64x60_handle bh;
38 static u32 cpci690_br_base;
40 static const unsigned int cpu_7xx[16] = { /* 7xx & 74xx (but not 745x) */
41 18, 15, 14, 2, 4, 13, 5, 9, 6, 11, 8, 10, 16, 12, 7, 0
44 TODC_ALLOC();
46 static int __init
47 cpci690_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
49 struct pci_controller *hose = pci_bus_to_hose(dev->bus->number);
51 if (hose->index == 0) {
52 static char pci_irq_table[][4] =
54 * PCI IDSEL/INTPIN->INTLINE
55 * A B C D
58 { 90, 91, 88, 89}, /* IDSEL 30/20 - Sentinel */
61 const long min_idsel = 20, max_idsel = 20, irqs_per_slot = 4;
62 return PCI_IRQ_TABLE_LOOKUP;
63 } else {
64 static char pci_irq_table[][4] =
66 * PCI IDSEL/INTPIN->INTLINE
67 * A B C D
70 { 93, 94, 95, 92}, /* IDSEL 28/18 - PMC slot 2 */
71 { 0, 0, 0, 0}, /* IDSEL 29/19 - Not used */
72 { 94, 95, 92, 93}, /* IDSEL 30/20 - PMC slot 1 */
75 const long min_idsel = 18, max_idsel = 20, irqs_per_slot = 4;
76 return PCI_IRQ_TABLE_LOOKUP;
80 static int
81 cpci690_get_cpu_speed(void)
83 unsigned long hid1;
85 hid1 = mfspr(SPRN_HID1) >> 28;
86 return CPCI690_BUS_FREQ * cpu_7xx[hid1]/2;
89 #define KB (1024UL)
90 #define MB (1024UL * KB)
91 #define GB (1024UL * MB)
93 unsigned long __init
94 cpci690_find_end_of_memory(void)
96 u32 mem_ctlr_size;
97 static u32 board_size;
98 static u8 first_time = 1;
100 if (first_time) {
101 /* Using cpci690_set_bat() mapping ==> virt addr == phys addr */
102 switch (in_8((u8 *) (cpci690_br_base +
103 CPCI690_BR_MEM_CTLR)) & 0x07) {
104 case 0x01:
105 board_size = 256*MB;
106 break;
107 case 0x02:
108 board_size = 512*MB;
109 break;
110 case 0x03:
111 board_size = 768*MB;
112 break;
113 case 0x04:
114 board_size = 1*GB;
115 break;
116 case 0x05:
117 board_size = 1*GB + 512*MB;
118 break;
119 case 0x06:
120 board_size = 2*GB;
121 break;
122 default:
123 board_size = 0xffffffff; /* use mem ctlr size */
124 } /* switch */
126 mem_ctlr_size = mv64x60_get_mem_size(CONFIG_MV64X60_NEW_BASE,
127 MV64x60_TYPE_GT64260A);
129 /* Check that mem ctlr & board reg agree. If not, pick MIN. */
130 if (board_size != mem_ctlr_size) {
131 printk(KERN_WARNING "Board register & memory controller"
132 "mem size disagree (board reg: 0x%lx, "
133 "mem ctlr: 0x%lx)\n",
134 (ulong)board_size, (ulong)mem_ctlr_size);
135 board_size = min(board_size, mem_ctlr_size);
138 first_time = 0;
139 } /* if */
141 return board_size;
144 static void __init
145 cpci690_setup_bridge(void)
147 struct mv64x60_setup_info si;
148 int i;
150 memset(&si, 0, sizeof(si));
152 si.phys_reg_base = CONFIG_MV64X60_NEW_BASE;
154 si.pci_0.enable_bus = 1;
155 si.pci_0.pci_io.cpu_base = CPCI690_PCI0_IO_START_PROC_ADDR;
156 si.pci_0.pci_io.pci_base_hi = 0;
157 si.pci_0.pci_io.pci_base_lo = CPCI690_PCI0_IO_START_PCI_ADDR;
158 si.pci_0.pci_io.size = CPCI690_PCI0_IO_SIZE;
159 si.pci_0.pci_io.swap = MV64x60_CPU2PCI_SWAP_NONE;
160 si.pci_0.pci_mem[0].cpu_base = CPCI690_PCI0_MEM_START_PROC_ADDR;
161 si.pci_0.pci_mem[0].pci_base_hi = CPCI690_PCI0_MEM_START_PCI_HI_ADDR;
162 si.pci_0.pci_mem[0].pci_base_lo = CPCI690_PCI0_MEM_START_PCI_LO_ADDR;
163 si.pci_0.pci_mem[0].size = CPCI690_PCI0_MEM_SIZE;
164 si.pci_0.pci_mem[0].swap = MV64x60_CPU2PCI_SWAP_NONE;
165 si.pci_0.pci_cmd_bits = 0;
166 si.pci_0.latency_timer = 0x80;
168 si.pci_1.enable_bus = 1;
169 si.pci_1.pci_io.cpu_base = CPCI690_PCI1_IO_START_PROC_ADDR;
170 si.pci_1.pci_io.pci_base_hi = 0;
171 si.pci_1.pci_io.pci_base_lo = CPCI690_PCI1_IO_START_PCI_ADDR;
172 si.pci_1.pci_io.size = CPCI690_PCI1_IO_SIZE;
173 si.pci_1.pci_io.swap = MV64x60_CPU2PCI_SWAP_NONE;
174 si.pci_1.pci_mem[0].cpu_base = CPCI690_PCI1_MEM_START_PROC_ADDR;
175 si.pci_1.pci_mem[0].pci_base_hi = CPCI690_PCI1_MEM_START_PCI_HI_ADDR;
176 si.pci_1.pci_mem[0].pci_base_lo = CPCI690_PCI1_MEM_START_PCI_LO_ADDR;
177 si.pci_1.pci_mem[0].size = CPCI690_PCI1_MEM_SIZE;
178 si.pci_1.pci_mem[0].swap = MV64x60_CPU2PCI_SWAP_NONE;
179 si.pci_1.pci_cmd_bits = 0;
180 si.pci_1.latency_timer = 0x80;
182 for (i=0; i<MV64x60_CPU2MEM_WINDOWS; i++) {
183 si.cpu_prot_options[i] = 0;
184 si.cpu_snoop_options[i] = GT64260_CPU_SNOOP_WB;
185 si.pci_0.acc_cntl_options[i] =
186 GT64260_PCI_ACC_CNTL_DREADEN |
187 GT64260_PCI_ACC_CNTL_RDPREFETCH |
188 GT64260_PCI_ACC_CNTL_RDLINEPREFETCH |
189 GT64260_PCI_ACC_CNTL_RDMULPREFETCH |
190 GT64260_PCI_ACC_CNTL_SWAP_NONE |
191 GT64260_PCI_ACC_CNTL_MBURST_32_BTYES;
192 si.pci_0.snoop_options[i] = GT64260_PCI_SNOOP_WB;
193 si.pci_1.acc_cntl_options[i] =
194 GT64260_PCI_ACC_CNTL_DREADEN |
195 GT64260_PCI_ACC_CNTL_RDPREFETCH |
196 GT64260_PCI_ACC_CNTL_RDLINEPREFETCH |
197 GT64260_PCI_ACC_CNTL_RDMULPREFETCH |
198 GT64260_PCI_ACC_CNTL_SWAP_NONE |
199 GT64260_PCI_ACC_CNTL_MBURST_32_BTYES;
200 si.pci_1.snoop_options[i] = GT64260_PCI_SNOOP_WB;
203 /* Lookup PCI host bridges */
204 if (mv64x60_init(&bh, &si))
205 printk(KERN_ERR "Bridge initialization failed.\n");
207 pci_dram_offset = 0; /* System mem at same addr on PCI & cpu bus */
208 ppc_md.pci_swizzle = common_swizzle;
209 ppc_md.pci_map_irq = cpci690_map_irq;
210 ppc_md.pci_exclude_device = mv64x60_pci_exclude_device;
212 mv64x60_set_bus(&bh, 0, 0);
213 bh.hose_a->first_busno = 0;
214 bh.hose_a->last_busno = 0xff;
215 bh.hose_a->last_busno = pciauto_bus_scan(bh.hose_a, 0);
217 bh.hose_b->first_busno = bh.hose_a->last_busno + 1;
218 mv64x60_set_bus(&bh, 1, bh.hose_b->first_busno);
219 bh.hose_b->last_busno = 0xff;
220 bh.hose_b->last_busno = pciauto_bus_scan(bh.hose_b,
221 bh.hose_b->first_busno);
224 static void __init
225 cpci690_setup_peripherals(void)
227 /* Set up windows to CPLD, RTC/TODC, IPMI. */
228 mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_0_WIN, CPCI690_BR_BASE,
229 CPCI690_BR_SIZE, 0);
230 bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_0_WIN);
231 cpci690_br_base = (u32)ioremap(CPCI690_BR_BASE, CPCI690_BR_SIZE);
233 mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_1_WIN, CPCI690_TODC_BASE,
234 CPCI690_TODC_SIZE, 0);
235 bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_1_WIN);
236 TODC_INIT(TODC_TYPE_MK48T35, 0, 0,
237 ioremap(CPCI690_TODC_BASE, CPCI690_TODC_SIZE), 8);
239 mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_2_WIN, CPCI690_IPMI_BASE,
240 CPCI690_IPMI_SIZE, 0);
241 bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_2_WIN);
243 mv64x60_set_bits(&bh, MV64x60_PCI0_ARBITER_CNTL, (1<<31));
244 mv64x60_set_bits(&bh, MV64x60_PCI1_ARBITER_CNTL, (1<<31));
246 mv64x60_set_bits(&bh, MV64x60_CPU_MASTER_CNTL, (1<<9)); /* Only 1 cpu */
249 * Turn off timer/counters. Not turning off watchdog timer because
250 * can't read its reg on the 64260A so don't know if we'll be enabling
251 * or disabling.
253 mv64x60_clr_bits(&bh, MV64x60_TIMR_CNTR_0_3_CNTL,
254 ((1<<0) | (1<<8) | (1<<16) | (1<<24)));
255 mv64x60_clr_bits(&bh, GT64260_TIMR_CNTR_4_7_CNTL,
256 ((1<<0) | (1<<8) | (1<<16) | (1<<24)));
259 * Set MPSC Multiplex RMII
260 * NOTE: ethernet driver modifies bit 0 and 1
262 mv64x60_write(&bh, GT64260_MPP_SERIAL_PORTS_MULTIPLEX, 0x00001102);
264 #define GPP_EXTERNAL_INTERRUPTS \
265 ((1<<24) | (1<<25) | (1<<26) | (1<<27) | \
266 (1<<28) | (1<<29) | (1<<30) | (1<<31))
267 /* PCI interrupts are inputs */
268 mv64x60_clr_bits(&bh, MV64x60_GPP_IO_CNTL, GPP_EXTERNAL_INTERRUPTS);
269 /* PCI interrupts are active low */
270 mv64x60_set_bits(&bh, MV64x60_GPP_LEVEL_CNTL, GPP_EXTERNAL_INTERRUPTS);
272 /* Clear any pending interrupts for these inputs and enable them. */
273 mv64x60_write(&bh, MV64x60_GPP_INTR_CAUSE, ~GPP_EXTERNAL_INTERRUPTS);
274 mv64x60_set_bits(&bh, MV64x60_GPP_INTR_MASK, GPP_EXTERNAL_INTERRUPTS);
276 /* Route MPP interrupt inputs to GPP */
277 mv64x60_write(&bh, MV64x60_MPP_CNTL_2, 0x00000000);
278 mv64x60_write(&bh, MV64x60_MPP_CNTL_3, 0x00000000);
281 static void __init
282 cpci690_setup_arch(void)
284 if (ppc_md.progress)
285 ppc_md.progress("cpci690_setup_arch: enter", 0);
286 #ifdef CONFIG_BLK_DEV_INITRD
287 if (initrd_start)
288 ROOT_DEV = Root_RAM0;
289 else
290 #endif
291 #ifdef CONFIG_ROOT_NFS
292 ROOT_DEV = Root_NFS;
293 #else
294 ROOT_DEV = Root_SDA2;
295 #endif
297 if (ppc_md.progress)
298 ppc_md.progress("cpci690_setup_arch: Enabling L2 cache", 0);
300 /* Enable L2 and L3 caches (if 745x) */
301 _set_L2CR(_get_L2CR() | L2CR_L2E);
302 _set_L3CR(_get_L3CR() | L3CR_L3E);
304 if (ppc_md.progress)
305 ppc_md.progress("cpci690_setup_arch: Initializing bridge", 0);
307 cpci690_setup_bridge(); /* set up PCI bridge(s) */
308 cpci690_setup_peripherals(); /* set up chip selects/GPP/MPP etc */
310 if (ppc_md.progress)
311 ppc_md.progress("cpci690_setup_arch: bridge init complete", 0);
313 printk(KERN_INFO "%s %s port (C) 2003 MontaVista Software, Inc. "
314 "(source@mvista.com)\n", BOARD_VENDOR, BOARD_MACHINE);
316 if (ppc_md.progress)
317 ppc_md.progress("cpci690_setup_arch: exit", 0);
320 /* Platform device data fixup routines. */
321 #if defined(CONFIG_SERIAL_MPSC)
322 static void __init
323 cpci690_fixup_mpsc_pdata(struct platform_device *pdev)
325 struct mpsc_pdata *pdata;
327 pdata = (struct mpsc_pdata *)pdev->dev.platform_data;
329 pdata->max_idle = 40;
330 pdata->default_baud = CPCI690_MPSC_BAUD;
331 pdata->brg_clk_src = CPCI690_MPSC_CLK_SRC;
332 pdata->brg_clk_freq = CPCI690_BUS_FREQ;
335 static int __init
336 cpci690_platform_notify(struct device *dev)
338 static struct {
339 char *bus_id;
340 void ((*rtn)(struct platform_device *pdev));
341 } dev_map[] = {
342 { MPSC_CTLR_NAME ".0", cpci690_fixup_mpsc_pdata },
343 { MPSC_CTLR_NAME ".1", cpci690_fixup_mpsc_pdata },
345 struct platform_device *pdev;
346 int i;
348 if (dev && dev->bus_id)
349 for (i=0; i<ARRAY_SIZE(dev_map); i++)
350 if (!strncmp(dev->bus_id, dev_map[i].bus_id,
351 BUS_ID_SIZE)) {
353 pdev = container_of(dev,
354 struct platform_device, dev);
355 dev_map[i].rtn(pdev);
358 return 0;
360 #endif
362 static void
363 cpci690_reset_board(void)
365 u32 i = 10000;
367 local_irq_disable();
368 out_8((u8 *)(cpci690_br_base + CPCI690_BR_SW_RESET), 0x11);
370 while (i != 0) i++;
371 panic("restart failed\n");
374 static void
375 cpci690_restart(char *cmd)
377 cpci690_reset_board();
380 static void
381 cpci690_halt(void)
383 while (1);
384 /* NOTREACHED */
387 static void
388 cpci690_power_off(void)
390 cpci690_halt();
391 /* NOTREACHED */
394 static int
395 cpci690_show_cpuinfo(struct seq_file *m)
397 seq_printf(m, "vendor\t\t: " BOARD_VENDOR "\n");
398 seq_printf(m, "machine\t\t: " BOARD_MACHINE "\n");
399 seq_printf(m, "cpu MHz\t\t: %d\n", cpci690_get_cpu_speed()/1000/1000);
400 seq_printf(m, "bus MHz\t\t: %d\n", CPCI690_BUS_FREQ/1000/1000);
402 return 0;
405 static void __init
406 cpci690_calibrate_decr(void)
408 ulong freq;
410 freq = CPCI690_BUS_FREQ / 4;
412 printk(KERN_INFO "time_init: decrementer frequency = %lu.%.6lu MHz\n",
413 freq/1000000, freq%1000000);
415 tb_ticks_per_jiffy = freq / HZ;
416 tb_to_us = mulhwu_scale_factor(freq, 1000000);
419 static __inline__ void
420 cpci690_set_bat(u32 addr, u32 size)
422 addr &= 0xfffe0000;
423 size &= 0x1ffe0000;
424 size = ((size >> 17) - 1) << 2;
426 mb();
427 mtspr(SPRN_DBAT1U, addr | size | 0x2); /* Vs == 1; Vp == 0 */
428 mtspr(SPRN_DBAT1L, addr | 0x2a); /* WIMG bits == 0101; PP == r/w access */
429 mb();
432 #if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
433 static void __init
434 cpci690_map_io(void)
436 io_block_mapping(CONFIG_MV64X60_NEW_BASE, CONFIG_MV64X60_NEW_BASE,
437 128 * KB, _PAGE_IO);
439 #endif
441 void __init
442 platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
443 unsigned long r6, unsigned long r7)
445 #ifdef CONFIG_BLK_DEV_INITRD
446 initrd_start=initrd_end=0;
447 initrd_below_start_ok=0;
448 #endif /* CONFIG_BLK_DEV_INITRD */
450 parse_bootinfo(find_bootinfo());
452 loops_per_jiffy = cpci690_get_cpu_speed() / HZ;
454 isa_mem_base = 0;
456 ppc_md.setup_arch = cpci690_setup_arch;
457 ppc_md.show_cpuinfo = cpci690_show_cpuinfo;
458 ppc_md.init_IRQ = gt64260_init_irq;
459 ppc_md.get_irq = gt64260_get_irq;
460 ppc_md.restart = cpci690_restart;
461 ppc_md.power_off = cpci690_power_off;
462 ppc_md.halt = cpci690_halt;
463 ppc_md.find_end_of_memory = cpci690_find_end_of_memory;
464 ppc_md.time_init = todc_time_init;
465 ppc_md.set_rtc_time = todc_set_rtc_time;
466 ppc_md.get_rtc_time = todc_get_rtc_time;
467 ppc_md.nvram_read_val = todc_direct_read_val;
468 ppc_md.nvram_write_val = todc_direct_write_val;
469 ppc_md.calibrate_decr = cpci690_calibrate_decr;
472 * Need to map in board regs (used by cpci690_find_end_of_memory())
473 * and the bridge's regs (used by progress);
475 cpci690_set_bat(CPCI690_BR_BASE, 32 * MB);
476 cpci690_br_base = CPCI690_BR_BASE;
478 #ifdef CONFIG_SERIAL_TEXT_DEBUG
479 ppc_md.setup_io_mappings = cpci690_map_io;
480 ppc_md.progress = mv64x60_mpsc_progress;
481 mv64x60_progress_init(CONFIG_MV64X60_NEW_BASE);
482 #endif /* CONFIG_SERIAL_TEXT_DEBUG */
483 #ifdef CONFIG_KGDB
484 ppc_md.setup_io_mappings = cpci690_map_io;
485 ppc_md.early_serial_map = cpci690_early_serial_map;
486 #endif /* CONFIG_KGDB */
488 #if defined(CONFIG_SERIAL_MPSC)
489 platform_notify = cpci690_platform_notify;
490 #endif