| blob | fd98ee0f843e4d2c815047822d4d032fcdb4fe31 |
1 /*----------------------------------------------------------------------------+
2 | This source code has been made available to you by IBM on an AS-IS
3 | basis. Anyone receiving this source is licensed under IBM
4 | copyrights to use it in any way he or she deems fit, including
5 | copying it, modifying it, compiling it, and redistributing it either
6 | with or without modifications. No license under IBM patents or
7 | patent applications is to be implied by the copyright license.
8 |
9 | Any user of this software should understand that IBM cannot provide
10 | technical support for this software and will not be responsible for
11 | any consequences resulting from the use of this software.
12 |
13 | Any person who transfers this source code or any derivative work
14 | must include the IBM copyright notice, this paragraph, and the
15 | preceding two paragraphs in the transferred software.
16 |
17 | COPYRIGHT I B M CORPORATION 1999
18 | LICENSED MATERIAL - PROGRAM PROPERTY OF I B M
19 +----------------------------------------------------------------------------*/
20 /*----------------------------------------------------------------------------+
21 | Author: Maciej P. Tyrlik
22 | Component: Include file.
23 | File: stb.h
24 | Purpose: Common Set-tob-box definitions.
25 | Changes:
26 | Date: Comment:
27 | ----- --------
28 | 14-Jan-97 Created for ElPaso pass 1 MPT
29 | 13-May-97 Added function prototype and global variables MPT
30 | 08-Dec-98 Added RAW IR task information MPT
31 | 19-Jan-99 Port to Romeo MPT
32 | 19-May-00 Changed SDRAM to 32MB contiguous 0x1F000000 - 0x20FFFFFF RLB
33 +----------------------------------------------------------------------------*/
35 #ifndef _stb_h_
36 #define _stb_h_
38 /*----------------------------------------------------------------------------+
39 | Read/write from I/O macros.
40 +----------------------------------------------------------------------------*/
41 #define inbyte(port) (*((unsigned char volatile *)(port)))
42 #define outbyte(port,data) *(unsigned char volatile *)(port)=\
43 (unsigned char)(data)
45 #define inshort(port) (*((unsigned short volatile *)(port)))
46 #define outshort(port,data) *(unsigned short volatile *)(port)=\
47 (unsigned short)(data)
49 #define inword(port) (*((unsigned long volatile *)(port)))
50 #define outword(port,data) *(unsigned long volatile *)(port)=\
51 (unsigned long)(data)
53 /*----------------------------------------------------------------------------+
54 | STB interrupts.
55 +----------------------------------------------------------------------------*/
56 #define STB_XP_TP_INT 0
57 #define STB_XP_APP_INT 1
58 #define STB_AUD_INT 2
59 #define STB_VID_INT 3
60 #define STB_DMA0_INT 4
61 #define STB_DMA1_INT 5
62 #define STB_DMA2_INT 6
63 #define STB_DMA3_INT 7
64 #define STB_SCI_INT 8
65 #define STB_I2C1_INT 9
66 #define STB_I2C2_INT 10
67 #define STB_GPT_PWM0 11
68 #define STB_GPT_PWM1 12
69 #define STB_SCP_INT 13
70 #define STB_SSP_INT 14
71 #define STB_GPT_PWM2 15
72 #define STB_EXT5_INT 16
73 #define STB_EXT6_INT 17
74 #define STB_EXT7_INT 18
75 #define STB_EXT8_INT 19
76 #define STB_SCC_INT 20
77 #define STB_SICC_RECV_INT 21
78 #define STB_SICC_TRAN_INT 22
79 #define STB_PPU_INT 23
80 #define STB_DCRX_INT 24
81 #define STB_EXT0_INT 25
82 #define STB_EXT1_INT 26
83 #define STB_EXT2_INT 27
84 #define STB_EXT3_INT 28
85 #define STB_EXT4_INT 29
86 #define STB_REDWOOD_ENET_INT STB_EXT1_INT
88 /*----------------------------------------------------------------------------+
89 | STB tasks, task stack sizes, and task priorities. The actual task priority
90 | is 1 more than the specified number since priority 0 is reserved (system
91 | internaly adds 1 to supplied priority number).
92 +----------------------------------------------------------------------------*/
93 #define STB_IDLE_TASK_SS (5* 1024)
94 #define STB_IDLE_TASK_PRIO 0
95 #define STB_LEDTEST_SS (2* 1024)
96 #define STB_LEDTEST_PRIO 0
97 #define STB_CURSOR_TASK_SS (10* 1024)
98 #define STB_CURSOR_TASK_PRIO 7
99 #define STB_MPEG_TASK_SS (10* 1024)
100 #define STB_MPEG_TASK_PRIO 9
101 #define STB_DEMUX_TASK_SS (10* 1024)
102 #define STB_DEMUX_TASK_PRIO 20
103 #define RAW_STB_IR_TASK_SS (10* 1024)
104 #define RAW_STB_IR_TASK_PRIO 20
106 #define STB_SERIAL_ER_TASK_SS (10* 1024)
107 #define STB_SERIAL_ER_TASK_PRIO 1
108 #define STB_CA_TASK_SS (10* 1024)
109 #define STB_CA_TASK_PRIO 8
111 #define INIT_DEFAULT_VIDEO_SS (10* 1024)
112 #define INIT_DEFAULT_VIDEO_PRIO 8
113 #define INIT_DEFAULT_SERVI_SS (10* 1024)
114 #define INIT_DEFAULT_SERVI_PRIO 8
115 #define INIT_DEFAULT_POST_SS (10* 1024)
116 #define INIT_DEFAULT_POST_PRIO 8
117 #define INIT_DEFAULT_INTER_SS (10* 1024)
118 #define INIT_DEFAULT_INTER_PRIO 8
119 #define INIT_DEFAULT_BR_SS (10* 1024)
120 #define INIT_DEFAULT_BR_PRIO 8
121 #define INITIAL_TASK_STACK_SIZE (32* 1024)
123 #ifdef VESTA
124 /*----------------------------------------------------------------------------+
125 | Vesta Overall Address Map (all addresses are double mapped, bit 0 of the
126 | address is not decoded. Numbers below are dependent on board configuration.
127 | FLASH, SDRAM, DRAM numbers can be affected by actual board setup.
128 |
129 | FFE0,0000 - FFFF,FFFF FLASH
130 | F200,0000 - F210,FFFF FPGA logic
131 | Ethernet = F200,0000
132 | LED Display = F200,0100
133 | Xilinx #1 Regs = F204,0000
134 | Xilinx #2 Regs = F208,0000
135 | Spare = F20C,0000
136 | IDE CS0 = F210,0000
137 | F410,0000 - F410,FFFF IDE CS1
138 | C000,0000 - C7FF,FFFF OBP
139 | C000,0000 - C000,0014 SICC (16550 + infra red)
140 | C001,0000 - C001,0018 PPU (Parallel Port)
141 | C002,0000 - C002,001B SC0 (Smart Card 0)
142 | C003,0000 - C003,000F I2C0
143 | C004,0000 - C004,0009 SCC (16550 UART)
144 | C005,0000 - C005,0124 GPT (Timers)
145 | C006,0000 - C006,0058 GPIO0
146 | C007,0000 - C007,001b SC1 (Smart Card 1)
147 | C008,0000 - C008,FFFF Unused
148 | C009,0000 - C009,FFFF Unused
149 | C00A,0000 - C00A,FFFF Unused
150 | C00B,0000 - C00B,000F I2C1
151 | C00C,0000 - C00C,0006 SCP
152 | C00D,0000 - C00D,0010 SSP
153 | A000,0000 - A0FF,FFFF SDRAM1 (16M)
154 | 0000,0000 - 00FF,FFFF SDRAM0 (16M)
155 +----------------------------------------------------------------------------*/
156 #define STB_FLASH_BASE_ADDRESS 0xFFE00000
157 #define STB_FPGA_BASE_ADDRESS 0xF2000000
158 #define STB_SICC_BASE_ADDRESS 0xC0000000
159 #define STB_PPU_BASE_ADDR 0xC0010000
160 #define STB_SC0_BASE_ADDRESS 0xC0020000
161 #define STB_I2C1_BASE_ADDRESS 0xC0030000
162 #define STB_SCC_BASE_ADDRESS 0xC0040000
163 #define STB_TIMERS_BASE_ADDRESS 0xC0050000
164 #define STB_GPIO0_BASE_ADDRESS 0xC0060000
165 #define STB_SC1_BASE_ADDRESS 0xC0070000
166 #define STB_I2C2_BASE_ADDRESS 0xC00B0000
167 #define STB_SCP_BASE_ADDRESS 0xC00C0000
168 #define STB_SSP_BASE_ADDRESS 0xC00D0000
169 /*----------------------------------------------------------------------------+
170 |The following are used by the IBM RTOS SW.
171 |15-May-00 Changed these values to reflect movement of base addresses in
172 |order to support 32MB of contiguous SDRAM space.
173 |Points to the cacheable region since these values are used in IBM RTOS
174 |to establish the vector address.
175 +----------------------------------------------------------------------------*/
176 #define STB_SDRAM1_BASE_ADDRESS 0x20000000
177 #define STB_SDRAM1_SIZE 0x01000000
178 #define STB_SDRAM0_BASE_ADDRESS 0x1F000000
179 #define STB_SDRAM0_SIZE 0x01000000
181 #else
182 /*----------------------------------------------------------------------------+
183 | ElPaso Overall Address Map (all addresses are double mapped, bit 0 of the
184 | address is not decoded. Numbers below are dependent on board configuration.
185 | FLASH, SDRAM, DRAM numbers can be affected by actual board setup. OPB
186 | devices are inside the ElPaso chip.
187 | FFE0,0000 - FFFF,FFFF FLASH
188 | F144,0000 - F104,FFFF FPGA logic
189 | F140,0000 - F100,0000 ethernet (through FPGA logic)
190 | C000,0000 - C7FF,FFFF OBP
191 | C000,0000 - C000,0014 SICC (16550+ infra red)
192 | C001,0000 - C001,0016 PPU (parallel port)
193 | C002,0000 - C002,001B SC (smart card)
194 | C003,0000 - C003,000F I2C 1
195 | C004,0000 - C004,0009 SCC (16550 UART)
196 | C005,0000 - C005,0124 Timers
197 | C006,0000 - C006,0058 GPIO0
198 | C007,0000 - C007,0058 GPIO1
199 | C008,0000 - C008,0058 GPIO2
200 | C009,0000 - C009,0058 GPIO3
201 | C00A,0000 - C00A,0058 GPIO4
202 | C00B,0000 - C00B,000F I2C 2
203 | C00C,0000 - C00C,0006 SCP
204 | C00D,0000 - C00D,0006 SSP
205 | A000,0000 - A0FF,FFFF SDRAM 16M
206 | 0000,0000 - 00FF,FFFF DRAM 16M
207 +----------------------------------------------------------------------------*/
208 #define STB_FLASH_BASE_ADDRESS 0xFFE00000
209 #define STB_FPGA_BASE_ADDRESS 0xF1440000
210 #define STB_ENET_BASE_ADDRESS 0xF1400000
211 #define STB_SICC_BASE_ADDRESS 0xC0000000
212 #define STB_PPU_BASE_ADDR 0xC0010000
213 #define STB_SC_BASE_ADDRESS 0xC0020000
214 #define STB_I2C1_BASE_ADDRESS 0xC0030000
215 #define STB_SCC_BASE_ADDRESS 0xC0040000
216 #define STB_TIMERS_BASE_ADDRESS 0xC0050000
217 #define STB_GPIO0_BASE_ADDRESS 0xC0060000
218 #define STB_GPIO1_BASE_ADDRESS 0xC0070000
219 #define STB_GPIO2_BASE_ADDRESS 0xC0080000
220 #define STB_GPIO3_BASE_ADDRESS 0xC0090000
221 #define STB_GPIO4_BASE_ADDRESS 0xC00A0000
222 #define STB_I2C2_BASE_ADDRESS 0xC00B0000
223 #define STB_SCP_BASE_ADDRESS 0xC00C0000
224 #define STB_SSP_BASE_ADDRESS 0xC00D0000
225 #define STB_SDRAM_BASE_ADDRESS 0xA0000000
226 #endif
228 /*----------------------------------------------------------------------------+
229 | Other common defines.
230 +----------------------------------------------------------------------------*/
231 #ifndef TRUE
232 #define TRUE 1
233 #endif
235 #ifndef FALSE
236 #define FALSE 0
237 #endif