arch/arm/mach-ixp2000/pci.c

   1 /*
   2  * arch/arm/mach-ixp2000/pci.c
   3  *
   4  * PCI routines for IXDP2400/IXDP2800 boards
   5  *
   6  * Original Author: Naeem Afzal <naeem.m.afzal@intel.com>
   7  * Maintained by: Deepak Saxena <dsaxena@plexity.net>
   8  *
   9  * Copyright 2002 Intel Corp.
  10  * Copyright (C) 2003-2004 MontaVista Software, Inc.
  11  *
  12  *  This program is free software; you can redistribute  it and/or modify it
  13  *  under  the terms of  the GNU General  Public License as published by the
  14  *  Free Software Foundation;  either version 2 of the  License, or (at your
  15  *  option) any later version.
  16  */
  17
  18 #include <linux/sched.h>
  19 #include <linux/kernel.h>
  20 #include <linux/pci.h>
  21 #include <linux/interrupt.h>
  22 #include <linux/mm.h>
  23 #include <linux/init.h>
  24 #include <linux/ioport.h>
  25 #include <linux/slab.h>
  26 #include <linux/delay.h>
  27
  28 #include <asm/io.h>
  29 #include <asm/irq.h>
  30 #include <asm/system.h>
  31 #include <asm/mach-types.h>
  32 #include <asm/hardware.h>
  33
  34 #include <asm/mach/pci.h>
  35
  36 static int pci_master_aborts = 0;
  37
  38 static int clear_master_aborts(void);
  39
  40 static u32 *
  41 ixp2000_pci_config_addr(unsigned int bus_nr, unsigned int devfn, int where)
  42 {
  43         u32 *paddress;
  44
  45         if (PCI_SLOT(devfn) > 7)
  46                 return 0;
  47
  48         /* Must be dword aligned */
  49         where &= ~3;
  50
  51         /*
  52          * For top bus, generate type 0, else type 1
  53          */
  54         if (!bus_nr) {
  55                 /* only bits[23:16] are used for IDSEL */
  56                 paddress = (u32 *) (IXP2000_PCI_CFG0_VIRT_BASE
  57                                     | (1 << (PCI_SLOT(devfn) + 16))
  58                                     | (PCI_FUNC(devfn) << 8) | where);
  59         } else {
  60                 paddress = (u32 *) (IXP2000_PCI_CFG1_VIRT_BASE
  61                                     | (bus_nr << 16)
  62                                     | (PCI_SLOT(devfn) << 11)
  63                                     | (PCI_FUNC(devfn) << 8) | where);
  64         }
  65
  66         return paddress;
  67 }
  68
  69 /*
  70  * Mask table, bits to mask for quantity of size 1, 2 or 4 bytes.
  71  * 0 and 3 are not valid indexes...
  72  */
  73 static u32 bytemask[] = {
  74         /*0*/   0,
  75         /*1*/   0xff,
  76         /*2*/   0xffff,
  77         /*3*/   0,
  78         /*4*/   0xffffffff,
  79 };
  80
  81
  82 int ixp2000_pci_read_config(struct pci_bus *bus, unsigned int devfn, int where,
  83                                 int size, u32 *value)
  84 {
  85         u32 n;
  86         u32 *addr;
  87
  88         n = where % 4;
  89
  90         addr = ixp2000_pci_config_addr(bus->number, devfn, where);
  91         if (!addr)
  92                 return PCIBIOS_DEVICE_NOT_FOUND;
  93
  94         pci_master_aborts = 0;
  95         *value = (*addr >> (8*n)) & bytemask[size];
  96         if (pci_master_aborts) {
  97                 pci_master_aborts = 0;
  98                 *value = 0xffffffff;
  99                 return PCIBIOS_DEVICE_NOT_FOUND;
 100         }
 101
 102         return PCIBIOS_SUCCESSFUL;
 103 }
 104
 105 /*
 106  * We don't do error checks by callling clear_master_aborts() b/c the
 107  * assumption is that the caller did a read first to make sure a device
 108  * exists.
 109  */
 110 int ixp2000_pci_write_config(struct pci_bus *bus, unsigned int devfn, int where,
 111                                 int size, u32 value)
 112 {
 113         u32 mask;
 114         u32 *addr;
 115         u32 temp;
 116
 117         mask = ~(bytemask[size] << ((where % 0x4) * 8));
 118         addr = ixp2000_pci_config_addr(bus->number, devfn, where);
 119         if (!addr)
 120                 return PCIBIOS_DEVICE_NOT_FOUND;
 121         temp = (u32) (value) << ((where % 0x4) * 8);
 122         *addr = (*addr & mask) | temp;
 123
 124         clear_master_aborts();
 125
 126         return PCIBIOS_SUCCESSFUL;
 127 }
 128
 129
 130 static struct pci_ops ixp2000_pci_ops = {
 131         .read   = ixp2000_pci_read_config,
 132         .write  = ixp2000_pci_write_config
 133 };
 134
 135 struct pci_bus *ixp2000_pci_scan_bus(int nr, struct pci_sys_data *sysdata)
 136 {
 137         return pci_scan_bus(sysdata->busnr, &ixp2000_pci_ops, sysdata);
 138 }
 139
 140
 141 int ixp2000_pci_abort_handler(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 142 {
 143
 144         volatile u32 temp;
 145         unsigned long flags;
 146
 147         pci_master_aborts = 1;
 148
 149         local_irq_save(flags);
 150         temp = *(IXP2000_PCI_CONTROL);
 151         if (temp & ((1 << 8) | (1 << 5))) {
 152                 ixp2000_reg_write(IXP2000_PCI_CONTROL, temp);
 153         }
 154
 155         temp = *(IXP2000_PCI_CMDSTAT);
 156         if (temp & (1 << 29)) {
 157                 while (temp & (1 << 29)) {
 158                         ixp2000_reg_write(IXP2000_PCI_CMDSTAT, temp);
 159                         temp = *(IXP2000_PCI_CMDSTAT);
 160                 }
 161         }
 162         local_irq_restore(flags);
 163
 164         /*
 165          * If it was an imprecise abort, then we need to correct the
 166          * return address to be _after_ the instruction.
 167          */
 168         if (fsr & (1 << 10))
 169                 regs->ARM_pc += 4;
 170
 171         return 0;
 172 }
 173
 174 int
 175 clear_master_aborts(void)
 176 {
 177         volatile u32 temp;
 178         unsigned long flags;
 179
 180         local_irq_save(flags);
 181         temp = *(IXP2000_PCI_CONTROL);
 182         if (temp & ((1 << 8) | (1 << 5))) {
 183                 ixp2000_reg_write(IXP2000_PCI_CONTROL, temp);
 184         }
 185
 186         temp = *(IXP2000_PCI_CMDSTAT);
 187         if (temp & (1 << 29)) {
 188                 while (temp & (1 << 29)) {
 189                         ixp2000_reg_write(IXP2000_PCI_CMDSTAT, temp);
 190                         temp = *(IXP2000_PCI_CMDSTAT);
 191                 }
 192         }
 193         local_irq_restore(flags);
 194
 195         return 0;
 196 }
 197
 198 void __init
 199 ixp2000_pci_preinit(void)
 200 {
 201         hook_fault_code(16+6, ixp2000_pci_abort_handler, SIGBUS,
 202                                 "PCI config cycle to non-existent device");
 203 }
 204
 205
 206 /*
 207  * IXP2000 systems often have large resource requirements, so we just
 208  * use our own resource space.
 209  */
 210 static struct resource ixp2000_pci_mem_space = {
 211         .start  = 0x00000000,
 212         .end    = 0xffffffff,
 213         .flags  = IORESOURCE_MEM,
 214         .name   = "PCI Mem Space"
 215 };
 216
 217 static struct resource ixp2000_pci_io_space = {
 218         .start  = 0x00000000,
 219         .end    = 0xffffffff,
 220         .flags  = IORESOURCE_IO,
 221         .name   = "PCI I/O Space"
 222 };
 223
 224 int ixp2000_pci_setup(int nr, struct pci_sys_data *sys)
 225 {
 226         if (nr >= 1)
 227                 return 0;
 228
 229         sys->resource[0] = &ixp2000_pci_io_space;
 230         sys->resource[1] = &ixp2000_pci_mem_space;
 231         sys->resource[2] = NULL;
 232
 233         return 1;
 234 }
 235