?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
ACPI: thinkpad-acpi: start the event hunt season
[linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git] / drivers / pcmcia / au1000_pb1x00.c
blobd6b4bd1db7d7e6b9edbb5a3117070cc0f718df58
1 /*
2 *
3 * Alchemy Semi Pb1x00 boards specific pcmcia routines.
4 *
5 * Copyright 2002 MontaVista Software Inc.
6 * Author: MontaVista Software, Inc.
7 * ppopov@mvista.com or source@mvista.com
8 *
9 * ########################################################################
10 *
11 * This program is free software; you can distribute it and/or modify it
12 * under the terms of the GNU General Public License (Version 2) as
13 * published by the Free Software Foundation.
14 *
15 * This program is distributed in the hope it will be useful, but WITHOUT
16 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
17 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
18 * for more details.
19 *
20 * You should have received a copy of the GNU General Public License along
21 * with this program; if not, write to the Free Software Foundation, Inc.,
22 * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
23 */
24 #include <linux/module.h>
25 #include <linux/init.h>
26 #include <linux/delay.h>
27 #include <linux/ioport.h>
28 #include <linux/kernel.h>
29 #include <linux/tqueue.h>
30 #include <linux/timer.h>
31 #include <linux/mm.h>
32 #include <linux/proc_fs.h>
33 #include <linux/types.h>
34
35 #include <pcmcia/cs_types.h>
36 #include <pcmcia/cs.h>
37 #include <pcmcia/ss.h>
38 #include <pcmcia/cistpl.h>
39 #include <pcmcia/bus_ops.h>
40
41 #include <asm/io.h>
42 #include <asm/irq.h>
43 #include <asm/system.h>
44
45 #include <asm/au1000.h>
46 #include <asm/au1000_pcmcia.h>
47
48 #define debug(fmt, arg...) do { } while (0)
49
50 #ifdef CONFIG_MIPS_PB1000
51 #include <asm/pb1000.h>
52 #define PCMCIA_IRQ AU1000_GPIO_15
53 #elif defined (CONFIG_MIPS_PB1500)
54 #include <asm/pb1500.h>
55 #define PCMCIA_IRQ AU1500_GPIO_203
56 #elif defined (CONFIG_MIPS_PB1100)
57 #include <asm/pb1100.h>
58 #define PCMCIA_IRQ AU1000_GPIO_11
59 #endif
60
61 static int pb1x00_pcmcia_init(struct pcmcia_init *init)
62 {
63 #ifdef CONFIG_MIPS_PB1000
64 u16 pcr;
65 pcr = PCR_SLOT_0_RST | PCR_SLOT_1_RST;
66
67 au_writel(0x8000, PB1000_MDR); /* clear pcmcia interrupt */
68 au_sync_delay(100);
69 au_writel(0x4000, PB1000_MDR); /* enable pcmcia interrupt */
70 au_sync();
71
72 pcr |= SET_VCC_VPP(VCC_HIZ,VPP_HIZ,0);
73 pcr |= SET_VCC_VPP(VCC_HIZ,VPP_HIZ,1);
74 au_writel(pcr, PB1000_PCR);
75 au_sync_delay(20);
76
77 return PCMCIA_NUM_SOCKS;
78
79 #else /* fixme -- take care of the Pb1500 at some point */
80
81 u16 pcr;
82 pcr = au_readw(PCMCIA_BOARD_REG) & ~0xf; /* turn off power */
83 pcr &= ~(PC_DEASSERT_RST | PC_DRV_EN);
84 au_writew(pcr, PCMCIA_BOARD_REG);
85 au_sync_delay(500);
86 return PCMCIA_NUM_SOCKS;
87 #endif
88 }
89
90 static int pb1x00_pcmcia_shutdown(void)
91 {
92 #ifdef CONFIG_MIPS_PB1000
93 u16 pcr;
94 pcr = PCR_SLOT_0_RST | PCR_SLOT_1_RST;
95 pcr |= SET_VCC_VPP(VCC_HIZ,VPP_HIZ,0);
96 pcr |= SET_VCC_VPP(VCC_HIZ,VPP_HIZ,1);
97 au_writel(pcr, PB1000_PCR);
98 au_sync_delay(20);
99 return 0;
100 #else
101 u16 pcr;
102 pcr = au_readw(PCMCIA_BOARD_REG) & ~0xf; /* turn off power */
103 pcr &= ~(PC_DEASSERT_RST | PC_DRV_EN);
104 au_writew(pcr, PCMCIA_BOARD_REG);
105 au_sync_delay(2);
106 return 0;
107 #endif
108 }
109
110 static int
111 pb1x00_pcmcia_socket_state(unsigned sock, struct pcmcia_state *state)
112 {
113 u32 inserted0, inserted1;
114 u16 vs0, vs1;
115
116 #ifdef CONFIG_MIPS_PB1000
117 vs0 = vs1 = (u16)au_readl(PB1000_ACR1);
118 inserted0 = !(vs0 & (ACR1_SLOT_0_CD1 | ACR1_SLOT_0_CD2));
119 inserted1 = !(vs1 & (ACR1_SLOT_1_CD1 | ACR1_SLOT_1_CD2));
120 vs0 = (vs0 >> 4) & 0x3;
121 vs1 = (vs1 >> 12) & 0x3;
122 #else
123 vs0 = (au_readw(BOARD_STATUS_REG) >> 4) & 0x3;
124 #ifdef CONFIG_MIPS_PB1500
125 inserted0 = !((au_readl(GPIO2_PINSTATE) >> 1) & 0x1); /* gpio 201 */
126 #else /* Pb1100 */
127 inserted0 = !((au_readl(SYS_PINSTATERD) >> 9) & 0x1); /* gpio 9 */
128 #endif
129 inserted1 = 0;
130 #endif
131
132 state->ready = 0;
133 state->vs_Xv = 0;
134 state->vs_3v = 0;
135 state->detect = 0;
136
137 if (sock == 0) {
138 if (inserted0) {
139 switch (vs0) {
140 case 0:
141 case 2:
142 state->vs_3v=1;
143 break;
144 case 3: /* 5V */
145 break;
146 default:
147 /* return without setting 'detect' */
148 printk(KERN_ERR "pb1x00 bad VS (%d)\n",
149 vs0);
150 return 0;
151 }
152 state->detect = 1;
153 }
154 }
155 else {
156 if (inserted1) {
157 switch (vs1) {
158 case 0:
159 case 2:
160 state->vs_3v=1;
161 break;
162 case 3: /* 5V */
163 break;
164 default:
165 /* return without setting 'detect' */
166 printk(KERN_ERR "pb1x00 bad VS (%d)\n",
167 vs1);
168 return 0;
169 }
170 state->detect = 1;
171 }
172 }
173
174 if (state->detect) {
175 state->ready = 1;
176 }
177
178 state->bvd1=1;
179 state->bvd2=1;
180 state->wrprot=0;
181 return 1;
182 }
183
184
185 static int pb1x00_pcmcia_get_irq_info(struct pcmcia_irq_info *info)
186 {
187
188 if(info->sock > PCMCIA_MAX_SOCK) return -1;
189
190 /*
191 * Even in the case of the Pb1000, both sockets are connected
192 * to the same irq line.
193 */
194 info->irq = PCMCIA_IRQ;
195
196 return 0;
197 }
198
199
200 static int
201 pb1x00_pcmcia_configure_socket(const struct pcmcia_configure *configure)
202 {
203 u16 pcr;
204
205 if(configure->sock > PCMCIA_MAX_SOCK) return -1;
206
207 #ifdef CONFIG_MIPS_PB1000
208 pcr = au_readl(PB1000_PCR);
209
210 if (configure->sock == 0) {
211 pcr &= ~(PCR_SLOT_0_VCC0 | PCR_SLOT_0_VCC1 |
212 PCR_SLOT_0_VPP0 | PCR_SLOT_0_VPP1);
213 }
214 else {
215 pcr &= ~(PCR_SLOT_1_VCC0 | PCR_SLOT_1_VCC1 |
216 PCR_SLOT_1_VPP0 | PCR_SLOT_1_VPP1);
217 }
218
219 pcr &= ~PCR_SLOT_0_RST;
220 debug("Vcc %dV Vpp %dV, pcr %x\n",
221 configure->vcc, configure->vpp, pcr);
222 switch(configure->vcc){
223 case 0: /* Vcc 0 */
224 switch(configure->vpp) {
225 case 0:
226 pcr |= SET_VCC_VPP(VCC_HIZ,VPP_GND,
227 configure->sock);
228 break;
229 case 12:
230 pcr |= SET_VCC_VPP(VCC_HIZ,VPP_12V,
231 configure->sock);
232 break;
233 case 50:
234 pcr |= SET_VCC_VPP(VCC_HIZ,VPP_5V,
235 configure->sock);
236 break;
237 case 33:
238 pcr |= SET_VCC_VPP(VCC_HIZ,VPP_3V,
239 configure->sock);
240 break;
241 default:
242 pcr |= SET_VCC_VPP(VCC_HIZ,VPP_HIZ,
243 configure->sock);
244 printk("%s: bad Vcc/Vpp (%d:%d)\n",
245 __func__,
246 configure->vcc,
247 configure->vpp);
248 break;
249 }
250 break;
251 case 50: /* Vcc 5V */
252 switch(configure->vpp) {
253 case 0:
254 pcr |= SET_VCC_VPP(VCC_5V,VPP_GND,
255 configure->sock);
256 break;
257 case 50:
258 pcr |= SET_VCC_VPP(VCC_5V,VPP_5V,
259 configure->sock);
260 break;
261 case 12:
262 pcr |= SET_VCC_VPP(VCC_5V,VPP_12V,
263 configure->sock);
264 break;
265 case 33:
266 pcr |= SET_VCC_VPP(VCC_5V,VPP_3V,
267 configure->sock);
268 break;
269 default:
270 pcr |= SET_VCC_VPP(VCC_HIZ,VPP_HIZ,
271 configure->sock);
272 printk("%s: bad Vcc/Vpp (%d:%d)\n",
273 __func__,
274 configure->vcc,
275 configure->vpp);
276 break;
277 }
278 break;
279 case 33: /* Vcc 3.3V */
280 switch(configure->vpp) {
281 case 0:
282 pcr |= SET_VCC_VPP(VCC_3V,VPP_GND,
283 configure->sock);
284 break;
285 case 50:
286 pcr |= SET_VCC_VPP(VCC_3V,VPP_5V,
287 configure->sock);
288 break;
289 case 12:
290 pcr |= SET_VCC_VPP(VCC_3V,VPP_12V,
291 configure->sock);
292 break;
293 case 33:
294 pcr |= SET_VCC_VPP(VCC_3V,VPP_3V,
295 configure->sock);
296 break;
297 default:
298 pcr |= SET_VCC_VPP(VCC_HIZ,VPP_HIZ,
299 configure->sock);
300 printk("%s: bad Vcc/Vpp (%d:%d)\n",
301 __func__,
302 configure->vcc,
303 configure->vpp);
304 break;
305 }
306 break;
307 default: /* what's this ? */
308 pcr |= SET_VCC_VPP(VCC_HIZ,VPP_HIZ,configure->sock);
309 printk(KERN_ERR "%s: bad Vcc %d\n",
310 __func__, configure->vcc);
311 break;
312 }
313
314 if (configure->sock == 0) {
315 pcr &= ~(PCR_SLOT_0_RST);
316 if (configure->reset)
317 pcr |= PCR_SLOT_0_RST;
318 }
319 else {
320 pcr &= ~(PCR_SLOT_1_RST);
321 if (configure->reset)
322 pcr |= PCR_SLOT_1_RST;
323 }
324 au_writel(pcr, PB1000_PCR);
325 au_sync_delay(300);
326
327 #else
328
329 pcr = au_readw(PCMCIA_BOARD_REG) & ~0xf;
330
331 debug("Vcc %dV Vpp %dV, pcr %x, reset %d\n",
332 configure->vcc, configure->vpp, pcr, configure->reset);
333
334
335 switch(configure->vcc){
336 case 0: /* Vcc 0 */
337 pcr |= SET_VCC_VPP(0,0);
338 break;
339 case 50: /* Vcc 5V */
340 switch(configure->vpp) {
341 case 0:
342 pcr |= SET_VCC_VPP(2,0);
343 break;
344 case 50:
345 pcr |= SET_VCC_VPP(2,1);
346 break;
347 case 12:
348 pcr |= SET_VCC_VPP(2,2);
349 break;
350 case 33:
351 default:
352 pcr |= SET_VCC_VPP(0,0);
353 printk("%s: bad Vcc/Vpp (%d:%d)\n",
354 __func__,
355 configure->vcc,
356 configure->vpp);
357 break;
358 }
359 break;
360 case 33: /* Vcc 3.3V */
361 switch(configure->vpp) {
362 case 0:
363 pcr |= SET_VCC_VPP(1,0);
364 break;
365 case 12:
366 pcr |= SET_VCC_VPP(1,2);
367 break;
368 case 33:
369 pcr |= SET_VCC_VPP(1,1);
370 break;
371 case 50:
372 default:
373 pcr |= SET_VCC_VPP(0,0);
374 printk("%s: bad Vcc/Vpp (%d:%d)\n",
375 __func__,
376 configure->vcc,
377 configure->vpp);
378 break;
379 }
380 break;
381 default: /* what's this ? */
382 pcr |= SET_VCC_VPP(0,0);
383 printk(KERN_ERR "%s: bad Vcc %d\n",
384 __func__, configure->vcc);
385 break;
386 }
387
388 au_writew(pcr, PCMCIA_BOARD_REG);
389 au_sync_delay(300);
390
391 if (!configure->reset) {
392 pcr |= PC_DRV_EN;
393 au_writew(pcr, PCMCIA_BOARD_REG);
394 au_sync_delay(100);
395 pcr |= PC_DEASSERT_RST;
396 au_writew(pcr, PCMCIA_BOARD_REG);
397 au_sync_delay(100);
398 }
399 else {
400 pcr &= ~(PC_DEASSERT_RST | PC_DRV_EN);
401 au_writew(pcr, PCMCIA_BOARD_REG);
402 au_sync_delay(100);
403 }
404 #endif
405 return 0;
406 }
407
408
409 struct pcmcia_low_level pb1x00_pcmcia_ops = {
410 pb1x00_pcmcia_init,
411 pb1x00_pcmcia_shutdown,
412 pb1x00_pcmcia_socket_state,
413 pb1x00_pcmcia_get_irq_info,
414 pb1x00_pcmcia_configure_socket
415 };
Linux 2.6 ibm-acpi/thinkpad-acpi driver git tree