drivers/net/ne3210.c

   1 /*
   2         ne3210.c
   3
   4         Linux driver for Novell NE3210 EISA Network Adapter
   5
   6         Copyright (C) 1998, Paul Gortmaker.
   7
   8         This software may be used and distributed according to the terms
   9         of the GNU General Public License, incorporated herein by reference.
  10
  11         Information and Code Sources:
  12
  13         1) Based upon my other EISA 8390 drivers (lne390, es3210, smc-ultra32)
  14         2) The existing myriad of other Linux 8390 drivers by Donald Becker.
  15         3) Info for getting IRQ and sh-mem gleaned from the EISA cfg file
  16
  17         The NE3210 is an EISA shared memory NS8390 implementation.  Shared
  18         memory address > 1MB should work with this driver.
  19
  20         Note that the .cfg file (3/11/93, v1.0) has AUI and BNC switched
  21         around (or perhaps there are some defective/backwards cards ???)
  22
  23         This driver WILL NOT WORK FOR THE NE3200 - it is completely different
  24         and does not use an 8390 at all.
  25
  26         Updated to EISA probing API 5/2003 by Marc Zyngier.
  27 */
  28
  29 static const char *version =
  30         "ne3210.c: Driver revision v0.03, 30/09/98\n";
  31
  32 #include <linux/module.h>
  33 #include <linux/eisa.h>
  34 #include <linux/kernel.h>
  35 #include <linux/errno.h>
  36 #include <linux/string.h>
  37 #include <linux/delay.h>
  38 #include <linux/init.h>
  39 #include <linux/interrupt.h>
  40 #include <linux/netdevice.h>
  41 #include <linux/etherdevice.h>
  42
  43 #include <asm/io.h>
  44 #include <asm/system.h>
  45
  46 #include "8390.h"
  47
  48 #define DRV_NAME "ne3210"
  49
  50 static int ne3210_open(struct net_device *dev);
  51 static int ne3210_close(struct net_device *dev);
  52
  53 static void ne3210_reset_8390(struct net_device *dev);
  54
  55 static void ne3210_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page);
  56 static void ne3210_block_input(struct net_device *dev, int count, struct sk_buff *skb, int ring_offset);
  57 static void ne3210_block_output(struct net_device *dev, int count, const unsigned char *buf, const int start_page);
  58
  59 #define NE3210_START_PG         0x00    /* First page of TX buffer      */
  60 #define NE3210_STOP_PG          0x80    /* Last page +1 of RX ring      */
  61
  62 #define NE3210_IO_EXTENT        0x20
  63 #define NE3210_SA_PROM          0x16    /* Start of e'net addr.         */
  64 #define NE3210_RESET_PORT       0xc84
  65 #define NE3210_NIC_OFFSET       0x00    /* Hello, the 8390 is *here*    */
  66
  67 #define NE3210_ADDR0            0x00    /* 3 byte vendor prefix         */
  68 #define NE3210_ADDR1            0x00
  69 #define NE3210_ADDR2            0x1b
  70
  71 #define NE3210_CFG1             0xc84   /* NB: 0xc84 is also "reset" port. */
  72 #define NE3210_CFG2             0xc90
  73 #define NE3210_CFG_EXTENT       (NE3210_CFG2 - NE3210_CFG1 + 1)
  74
  75 /*
  76  *      You can OR any of the following bits together and assign it
  77  *      to NE3210_DEBUG to get verbose driver info during operation.
  78  *      Currently only the probe one is implemented.
  79  */
  80
  81 #define NE3210_D_PROBE  0x01
  82 #define NE3210_D_RX_PKT 0x02
  83 #define NE3210_D_TX_PKT 0x04
  84 #define NE3210_D_IRQ    0x08
  85
  86 #define NE3210_DEBUG    0x0
  87
  88 static unsigned char irq_map[] __initdata = {15, 12, 11, 10, 9, 7, 5, 3};
  89 static unsigned int shmem_map[] __initdata = {0xff0, 0xfe0, 0xfff0, 0xd8, 0xffe0, 0xffc0, 0xd0, 0x0};
  90 static const char *ifmap[] __initdata = {"UTP", "?", "BNC", "AUI"};
  91 static int ifmap_val[] __initdata = {
  92                 IF_PORT_10BASET,
  93                 IF_PORT_UNKNOWN,
  94                 IF_PORT_10BASE2,
  95                 IF_PORT_AUI,
  96 };
  97
  98 static int __init ne3210_eisa_probe (struct device *device)
  99 {
 100         unsigned long ioaddr, phys_mem;
 101         int i, retval, port_index;
 102         struct eisa_device *edev = to_eisa_device (device);
 103         struct net_device *dev;
 104
 105         /* Allocate dev->priv and fill in 8390 specific dev fields. */
 106         if (!(dev = alloc_ei_netdev ())) {
 107                 printk ("ne3210.c: unable to allocate memory for dev!\n");
 108                 return -ENOMEM;
 109         }
 110
 111         SET_MODULE_OWNER(dev);
 112         SET_NETDEV_DEV(dev, device);
 113         device->driver_data = dev;
 114         ioaddr = edev->base_addr;
 115
 116         if (!request_region(ioaddr, NE3210_IO_EXTENT, DRV_NAME)) {
 117                 retval = -EBUSY;
 118                 goto out;
 119         }
 120
 121         if (!request_region(ioaddr + NE3210_CFG1,
 122                             NE3210_CFG_EXTENT, DRV_NAME)) {
 123                 retval = -EBUSY;
 124                 goto out1;
 125         }
 126
 127 #if NE3210_DEBUG & NE3210_D_PROBE
 128         printk("ne3210-debug: probe at %#x, ID %s\n", ioaddr, edev->id.sig);
 129         printk("ne3210-debug: config regs: %#x %#x\n",
 130                 inb(ioaddr + NE3210_CFG1), inb(ioaddr + NE3210_CFG2));
 131 #endif
 132
 133
 134         port_index = inb(ioaddr + NE3210_CFG2) >> 6;
 135         printk("ne3210.c: NE3210 in EISA slot %d, media: %s, addr:",
 136                 edev->slot, ifmap[port_index]);
 137         for(i = 0; i < ETHER_ADDR_LEN; i++)
 138                 printk(" %02x", (dev->dev_addr[i] = inb(ioaddr + NE3210_SA_PROM + i)));
 139
 140
 141         /* Snarf the interrupt now. CFG file has them all listed as `edge' with share=NO */
 142         dev->irq = irq_map[(inb(ioaddr + NE3210_CFG2) >> 3) & 0x07];
 143         printk(".\nne3210.c: using IRQ %d, ", dev->irq);
 144
 145         retval = request_irq(dev->irq, ei_interrupt, 0, DRV_NAME, dev);
 146         if (retval) {
 147                 printk (" unable to get IRQ %d.\n", dev->irq);
 148                 goto out2;
 149         }
 150
 151         phys_mem = shmem_map[inb(ioaddr + NE3210_CFG2) & 0x07] * 0x1000;
 152
 153         /*
 154            BEWARE!! Some dain-bramaged EISA SCUs will allow you to put
 155            the card mem within the region covered by `normal' RAM  !!!
 156         */
 157         if (phys_mem > 1024*1024) {     /* phys addr > 1MB */
 158                 if (phys_mem < virt_to_phys(high_memory)) {
 159                         printk(KERN_CRIT "ne3210.c: Card RAM overlaps with normal memory!!!\n");
 160                         printk(KERN_CRIT "ne3210.c: Use EISA SCU to set card memory below 1MB,\n");
 161                         printk(KERN_CRIT "ne3210.c: or to an address above 0x%lx.\n", virt_to_phys(high_memory));
 162                         printk(KERN_CRIT "ne3210.c: Driver NOT installed.\n");
 163                         retval = -EINVAL;
 164                         goto out3;
 165                 }
 166         }
 167
 168         if (!request_mem_region (phys_mem, NE3210_STOP_PG*0x100, DRV_NAME)) {
 169                 printk ("ne3210.c: Unable to request shared memory at physical address %#lx\n",
 170                         phys_mem);
 171                 goto out3;
 172         }
 173
 174         printk("%dkB memory at physical address %#lx\n",
 175                NE3210_STOP_PG/4, phys_mem);
 176
 177         dev->mem_start = (unsigned long)ioremap(phys_mem, NE3210_STOP_PG*0x100);
 178         if (dev->mem_start == 0) {
 179                 printk(KERN_ERR "ne3210.c: Unable to remap card memory !!\n");
 180                 printk(KERN_ERR "ne3210.c: Driver NOT installed.\n");
 181                 retval = -EAGAIN;
 182                 goto out4;
 183         }
 184         printk("ne3210.c: remapped %dkB card memory to virtual address %#lx\n",
 185                NE3210_STOP_PG/4, dev->mem_start);
 186         dev->mem_end = ei_status.rmem_end = dev->mem_start
 187                 + (NE3210_STOP_PG - NE3210_START_PG)*256;
 188         ei_status.rmem_start = dev->mem_start + TX_PAGES*256;
 189
 190         /* The 8390 offset is zero for the NE3210 */
 191         dev->base_addr = ioaddr;
 192
 193         ei_status.name = "NE3210";
 194         ei_status.tx_start_page = NE3210_START_PG;
 195         ei_status.rx_start_page = NE3210_START_PG + TX_PAGES;
 196         ei_status.stop_page = NE3210_STOP_PG;
 197         ei_status.word16 = 1;
 198         ei_status.priv = phys_mem;
 199
 200         if (ei_debug > 0)
 201                 printk(version);
 202
 203         ei_status.reset_8390 = &ne3210_reset_8390;
 204         ei_status.block_input = &ne3210_block_input;
 205         ei_status.block_output = &ne3210_block_output;
 206         ei_status.get_8390_hdr = &ne3210_get_8390_hdr;
 207
 208         dev->open = &ne3210_open;
 209         dev->stop = &ne3210_close;
 210 #ifdef CONFIG_NET_POLL_CONTROLLER
 211         dev->poll_controller = ei_poll;
 212 #endif
 213         dev->if_port = ifmap_val[port_index];
 214
 215         if ((retval = register_netdev (dev)))
 216                 goto out5;
 217
 218         NS8390_init(dev, 0);
 219         return 0;
 220
 221  out5:
 222         iounmap((void *)dev->mem_start);
 223  out4:
 224         release_mem_region (phys_mem, NE3210_STOP_PG*0x100);
 225  out3:
 226         free_irq (dev->irq, dev);
 227  out2:
 228         release_region (ioaddr + NE3210_CFG1, NE3210_CFG_EXTENT);
 229  out1:
 230         release_region (ioaddr, NE3210_IO_EXTENT);
 231  out:
 232         free_netdev (dev);
 233
 234         return retval;
 235 }
 236
 237 static int __devexit ne3210_eisa_remove (struct device *device)
 238 {
 239         struct net_device  *dev    = device->driver_data;
 240         unsigned long       ioaddr = to_eisa_device (device)->base_addr;
 241
 242         unregister_netdev (dev);
 243         iounmap((void *)dev->mem_start);
 244         release_mem_region (ei_status.priv, NE3210_STOP_PG*0x100);
 245         free_irq (dev->irq, dev);
 246         release_region (ioaddr + NE3210_CFG1, NE3210_CFG_EXTENT);
 247         release_region (ioaddr, NE3210_IO_EXTENT);
 248         free_netdev (dev);
 249
 250         return 0;
 251 }
 252
 253 /*
 254  *      Reset by toggling the "Board Enable" bits (bit 2 and 0).
 255  */
 256
 257 static void ne3210_reset_8390(struct net_device *dev)
 258 {
 259         unsigned short ioaddr = dev->base_addr;
 260
 261         outb(0x04, ioaddr + NE3210_RESET_PORT);
 262         if (ei_debug > 1) printk("%s: resetting the NE3210...", dev->name);
 263
 264         mdelay(2);
 265
 266         ei_status.txing = 0;
 267         outb(0x01, ioaddr + NE3210_RESET_PORT);
 268         if (ei_debug > 1) printk("reset done\n");
 269
 270         return;
 271 }
 272
 273 /*
 274  *      Note: In the following three functions is the implicit assumption
 275  *      that the associated memcpy will only use "rep; movsl" as long as
 276  *      we keep the counts as some multiple of doublewords. This is a
 277  *      requirement of the hardware, and also prevents us from using
 278  *      eth_io_copy_and_sum() since we can't guarantee it will limit
 279  *      itself to doubleword access.
 280  */
 281
 282 /*
 283  *      Grab the 8390 specific header. Similar to the block_input routine, but
 284  *      we don't need to be concerned with ring wrap as the header will be at
 285  *      the start of a page, so we optimize accordingly. (A single doubleword.)
 286  */
 287
 288 static void
 289 ne3210_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page)
 290 {
 291         unsigned long hdr_start = dev->mem_start + ((ring_page - NE3210_START_PG)<<8);
 292         memcpy_fromio(hdr, hdr_start, sizeof(struct e8390_pkt_hdr));
 293         hdr->count = (hdr->count + 3) & ~3;     /* Round up allocation. */
 294 }
 295
 296 /*
 297  *      Block input and output are easy on shared memory ethercards, the only
 298  *      complication is when the ring buffer wraps. The count will already
 299  *      be rounded up to a doubleword value via ne3210_get_8390_hdr() above.
 300  */
 301
 302 static void ne3210_block_input(struct net_device *dev, int count, struct sk_buff *skb,
 303                                                   int ring_offset)
 304 {
 305         unsigned long xfer_start = dev->mem_start + ring_offset - (NE3210_START_PG<<8);
 306
 307         if (xfer_start + count > ei_status.rmem_end) {
 308                 /* Packet wraps over end of ring buffer. */
 309                 int semi_count = ei_status.rmem_end - xfer_start;
 310                 memcpy_fromio(skb->data, xfer_start, semi_count);
 311                 count -= semi_count;
 312                 memcpy_fromio(skb->data + semi_count, ei_status.rmem_start, count);
 313         } else {
 314                 /* Packet is in one chunk. */
 315                 memcpy_fromio(skb->data, xfer_start, count);
 316         }
 317 }
 318
 319 static void ne3210_block_output(struct net_device *dev, int count,
 320                                 const unsigned char *buf, int start_page)
 321 {
 322         unsigned long shmem = dev->mem_start + ((start_page - NE3210_START_PG)<<8);
 323
 324         count = (count + 3) & ~3;     /* Round up to doubleword */
 325         memcpy_toio(shmem, buf, count);
 326 }
 327
 328 static int ne3210_open(struct net_device *dev)
 329 {
 330         ei_open(dev);
 331         return 0;
 332 }
 333
 334 static int ne3210_close(struct net_device *dev)
 335 {
 336
 337         if (ei_debug > 1)
 338                 printk("%s: Shutting down ethercard.\n", dev->name);
 339
 340         ei_close(dev);
 341         return 0;
 342 }
 343
 344 static struct eisa_device_id ne3210_ids[] = {
 345         { "EGL0101" },
 346         { "NVL1801" },
 347         { "" },
 348 };
 349
 350 static struct eisa_driver ne3210_eisa_driver = {
 351         .id_table = ne3210_ids,
 352         .driver   = {
 353                 .name   = "ne3210",
 354                 .probe  = ne3210_eisa_probe,
 355                 .remove = __devexit_p (ne3210_eisa_remove),
 356         },
 357 };
 358
 359 MODULE_DESCRIPTION("NE3210 EISA Ethernet driver");
 360 MODULE_LICENSE("GPL");
 361
 362 int ne3210_init(void)
 363 {
 364         return eisa_driver_register (&ne3210_eisa_driver);
 365 }
 366
 367 void ne3210_cleanup(void)
 368 {
 369         eisa_driver_unregister (&ne3210_eisa_driver);
 370 }
 371
 372 module_init (ne3210_init);
 373 module_exit (ne3210_cleanup);