Change a few defines to enums to match the other code around and argument bits #defin...
[kugel-rb/myfork.git] / bootloader / samsung_yps3.c
blobe541ff2f53237671475349e16a005aa4656c8567
1 /***************************************************************************
2 * __________ __ ___.
3 * Open \______ \ ____ ____ | | _\_ |__ _______ ___
4 * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
5 * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
6 * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
7 * \/ \/ \/ \/ \/
8 * $Id$
10 * Copyright (C) 2009 by Bertrik Sikken
12 * This program is free software; you can redistribute it and/or
13 * modify it under the terms of the GNU General Public License
14 * as published by the Free Software Foundation; either version 2
15 * of the License, or (at your option) any later version.
17 * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
18 * KIND, either express or implied.
20 ****************************************************************************/
22 #include <stdlib.h>
23 #include <stdio.h>
24 #include <stdarg.h>
25 #include <string.h>
27 #include "config.h"
29 #include "inttypes.h"
30 #include "cpu.h"
31 #include "system.h"
32 #include "lcd.h"
33 #include "kernel.h"
34 #include "thread.h"
35 #include "backlight.h"
36 #include "backlight-target.h"
37 #include "button.h"
38 #include "panic.h"
39 #include "power.h"
40 #include "common.h"
41 #include "usb.h"
42 #include "bitmaps/rockboxlogo.h"
44 #include "adc.h"
45 #include "adc-target.h"
47 #include "timer.h"
49 #include "i2c-s5l8700.h"
50 #include "dma-target.h"
51 #include "pcm.h"
52 #include "audiohw.h"
53 #include "rtc.h"
54 #include "tuner.h"
55 #include "si4700.h"
56 #include "fmradio_i2c.h"
57 #include "wmcodec.h"
59 char version[] = APPSVERSION;
60 #define LONG_DELAY 200000
61 #define SHORT_DELAY 50000
62 #define PAUSE_DELAY 50000
64 static inline void delay(unsigned int duration)
66 volatile unsigned int i;
67 for(i=0;i<duration;i++);
70 // forward declaration
71 static int rds_decode(int line, struct si4700_dbg_info *nfo);
73 void main(void)
75 char mystring[64];
76 int line, col;
77 unsigned char read_data[16];
78 int i;
79 struct si4700_dbg_info si4700_info;
80 // unsigned int data;
81 int brightness = DEFAULT_BRIGHTNESS_SETTING;
82 unsigned int button;
83 unsigned int fm_frequency = 100700000;
84 int audiovol = 0x60;
86 // enable all peripherals
87 PWRCON = 0;
89 // disable all interrupts
90 INTMSK = 0;
92 // start with all GPIOs as input
93 PCON0 = 0;
94 PCON1 = 0;
95 PCON2 = 0;
96 PCON3 = 0;
97 PCON4 = 0;
98 PCON5 = 0;
99 PCON6 = 0;
100 PCON7 = 0;
102 system_init();
103 kernel_init();
105 asm volatile("msr cpsr_c, #0x13\n\t"); // enable interrupts
107 lcd_init();
109 lcd_clear_display();
110 lcd_bitmap(rockboxlogo, 0, 160, BMPWIDTH_rockboxlogo, BMPHEIGHT_rockboxlogo);
111 lcd_update();
113 power_init();
115 i2c_init();
116 fmradio_i2c_init();
117 adc_init();
118 _backlight_init();
119 button_init_device();
121 // FM power
122 si4700_init();
123 tuner_power(true);
124 si4700_set(RADIO_SLEEP, 0);
125 si4700_set(RADIO_MUTE, 0);
126 si4700_set(RADIO_FREQUENCY, fm_frequency);
128 lcd_puts_scroll(0,0,"+++ this is a very very long line to test scrolling. ---");
130 // WM1800 codec configuration
131 wmcodec_write(0x0F, 0); // codec reset
132 wmcodec_write(0x19, 0xF0); // pwr mgmt1: VMID = 1, VREF, AINL, AINR
133 wmcodec_write(0x1A, 0x60); // pwr mgmt2: LOUT1, ROUT1
134 wmcodec_write(0x2F, 0x0C); // pwr mgmt3: LOMIX, ROMIX
135 wmcodec_write(0x02, audiovol); // LOUT1VOL
136 wmcodec_write(0x03, audiovol | (1 << 8)); // ROUT1VOL
137 wmcodec_write(0x22, (1 << 7) | (7 << 4)); // left out mix (1)
138 wmcodec_write(0x25, (1 << 7) | (7 << 4)); // right out mix (2)
140 // enable audio
141 PCON5 = (PCON5 & ~0x0000000F) | 0x00000001;
142 PDAT5 |= 1;
144 while (true)
146 line = 1;
148 #if 1 /* enable to see GPIOs */
149 snprintf(mystring, 64, "%02X %02X %02X %02X %02X %02X %02X %02X", PDAT0, PDAT1, PDAT2, PDAT3, PDAT4, PDAT5, PDAT6, PDAT7);
150 lcd_puts(0, line++, mystring);
151 #endif
153 #if 1 /* enable this to see info about the RTC */
154 rtc_read_datetime(read_data);
155 snprintf(mystring, 64, "RTC:");
156 for (i = 0; i < 7; i++) {
157 snprintf(mystring + 2 * i + 4, 64, "%02X", read_data[i]);
159 lcd_puts(0, line++, mystring);
160 #endif
162 #if 1 /* enable this to see radio debug info */
163 button = button_read_device();
164 if (button & BUTTON_RIGHT) {
165 fm_frequency += 100000;
166 si4700_set(RADIO_FREQUENCY, fm_frequency);
168 if (button & BUTTON_LEFT) {
169 fm_frequency -= 100000;
170 si4700_set(RADIO_FREQUENCY, fm_frequency);
172 snprintf(mystring, 64, "FM frequency: %9d", fm_frequency);
173 lcd_puts(0, line++, mystring);
175 si4700_dbg_info(&si4700_info);
176 col = snprintf(mystring, 64, "FM: ");
177 for (i = 0; i < 16; i++) {
178 col += snprintf(mystring + col, 64, "%04X ", si4700_info.regs[i]);
179 if (((i + 1) % 4) == 0) {
180 lcd_puts(0, line++, mystring);
181 col = 4;
184 line = rds_decode(line, &si4700_info);
185 #endif
187 #if 1 /* volume control with up/down keys */
188 button = button_read_device();
189 if (button & BUTTON_UP) {
190 if (audiovol < 127) {
191 audiovol++;
192 wmcodec_write(0x02, audiovol);
193 wmcodec_write(0x03, (1 << 8) | audiovol);
196 if (button & BUTTON_DOWN) {
197 if (audiovol > 0) {
198 audiovol--;
199 wmcodec_write(0x02, audiovol);
200 wmcodec_write(0x03, (1 << 8) | audiovol);
203 snprintf(mystring, 64, "volume %3d", audiovol);
204 lcd_puts(0, line++, mystring);
205 #endif
207 #if 1 /* enable this to see ADC info */
208 snprintf(mystring, 64, "%04X %04X %04X %04X", adc_read(0), adc_read(1), adc_read(2), adc_read(3));
209 lcd_puts(0, line++, mystring);
210 snprintf(mystring, 64, "ADC:USB %4d mV BAT %4d mV",
211 (adc_read(0) * 6000) >> 10, (adc_read(2) * 4650) >> 10);
212 lcd_puts(0, line++, mystring);
213 #endif
215 #if 1 /* enable this so see USB info */
216 snprintf(mystring, 64, "CLK %08X CLK2 %08X", CLKCON, CLKCON2);
217 lcd_puts(0, line++, mystring);
219 snprintf(mystring, 64, "%04X %04X %04X %04X", PHYCTRL, PHYPWR, URSTCON, UCLKCON);
220 lcd_puts(0, line++, mystring);
222 snprintf(mystring, 64, "SCR %04X SSR %04X EIR %04X", SCR, SSR, EIR);
223 lcd_puts(0, line++, mystring);
225 snprintf(mystring, 64, "FAR %04X FNR %04X EP0 %04X", FAR, FNR, EP0SR);
226 lcd_puts(0, line++, mystring);
227 #endif
229 #if 1 /* button lights controlled by keypad */
230 button = button_read_device();
231 if (button & (BUTTON_UP | BUTTON_DOWN | BUTTON_LEFT | BUTTON_RIGHT)) {
232 PDAT3 |= (1 << 3);
234 else {
235 PDAT3 &= ~(1 << 3);
237 if (button & (BUTTON_BACK | BUTTON_MENU)) {
238 PDAT3 |= (1 << 2);
240 else {
241 PDAT3 &= ~(1 << 2);
243 if (button & (BUTTON_SELECT)) {
244 PDAT4 |= (1 << 2);
246 else {
247 PDAT4 &= ~(1 << 2);
249 #endif
251 #if 1 /* backlight brightness controlled by up/down keys */
252 button = button_read_device();
253 if (button & BUTTON_MENU) {
254 if (brightness < MAX_BRIGHTNESS_SETTING) {
255 brightness++;
256 _backlight_set_brightness(brightness);
259 else if (button & BUTTON_BACK) {
260 if (brightness > MIN_BRIGHTNESS_SETTING) {
261 brightness--;
262 _backlight_set_brightness(brightness);
265 snprintf(mystring, 64, "bright %3d", brightness);
266 lcd_puts(0, line++, mystring);
267 #endif
269 #if 1 /* power off using power button */
270 button = button_read_device();
271 if (button & BUTTON_POWER) {
272 power_off();
274 #endif
276 #if 1 /* button info */
277 snprintf(mystring, 64, "BUTTONS %08X, %s", button_read_device(),
278 headphones_inserted() ? "HP" : "hp");
279 lcd_puts(0, line++, mystring);
280 #endif
282 lcd_update();
287 static int rds_decode(int line, struct si4700_dbg_info *nfo)
289 unsigned short rdsdata[4];
290 unsigned int pi, group, tp, pty, segment, abflag;
291 static unsigned int af1 = 0, af2 = 0;
292 static unsigned int day = 0, hour = 0, minute = 0;
293 static unsigned int abflag_prev = -1;
294 static char mystring[64];
296 /* big RDS arrays */
297 static char ps[9];
298 static char rt[65];
300 rdsdata[0] = nfo->regs[12];
301 rdsdata[1] = nfo->regs[13];
302 rdsdata[2] = nfo->regs[14];
303 rdsdata[3] = nfo->regs[15];
305 pi = rdsdata[0];
306 group = (rdsdata[1] >> 11) & 0x1F;
307 tp = (rdsdata[1] >> 10) & 1;
308 pty = (rdsdata[1] >> 5) & 0x1F;
310 switch (group) {
312 case 0: /* group 0A: basic info */
313 af1 = (rdsdata[2] >> 8) & 0xFF;
314 af2 = (rdsdata[2] >> 0) & 0xFF;
315 /* fall through */
316 case 1: /* group 0B: basic info */
317 segment = rdsdata[1] & 3;
318 ps[segment * 2 + 0] = (rdsdata[3] >> 8) & 0xFF;
319 ps[segment * 2 + 1] = (rdsdata[3] >> 0) & 0xFF;
320 break;
322 case 2: /* group 1A: programme item */
323 case 3: /* group 1B: programme item */
324 day = (rdsdata[3] >> 11) & 0x1F;
325 hour = (rdsdata[3] >> 6) & 0x1F;
326 minute = (rdsdata[3] >> 0) & 0x3F;
327 break;
329 case 4: /* group 2A: radio text */
330 segment = rdsdata[1] & 0xF;
331 abflag = (rdsdata[1] >> 4) & 1;
332 if (abflag != abflag_prev) {
333 memset(rt, '.', 64);
334 abflag_prev = abflag;
336 rt[segment * 4 + 0] = (rdsdata[2] >> 8) & 0xFF;
337 rt[segment * 4 + 1] = (rdsdata[2] >> 0) & 0xFF;
338 rt[segment * 4 + 2] = (rdsdata[3] >> 8) & 0xFF;
339 rt[segment * 4 + 3] = (rdsdata[3] >> 0) & 0xFF;
340 break;
342 case 5: /* group 2B: radio text */
343 segment = rdsdata[1] & 0xF;
344 abflag = (rdsdata[1] >> 4) & 1;
345 if (abflag != abflag_prev) {
346 memset(rt, '.', 64);
347 abflag_prev = abflag;
349 rt[segment * 2 + 0] = (rdsdata[3] >> 8) & 0xFF;
350 rt[segment * 2 + 1] = (rdsdata[3] >> 0) & 0xFF;
351 break;
353 default:
354 break;
357 snprintf(mystring, 64, "PI:%04X,TP:%d,PTY:%2d,AF:%02X/%02X", pi, tp, pty, af1, af2);
358 lcd_puts(0, line++, mystring);
359 snprintf(mystring, 64, "PS:%s,ITEM:%02d-%02d:%02d", ps, day, hour, minute);
360 lcd_puts(0, line++, mystring);
361 snprintf(mystring, 64, "RT:%s", rt);
362 lcd_puts(0, line++, mystring);
364 return line;