firmware/export/config-m200.h

   1 /*
   2  * This config file is for the Sansa M200 series
   3  */
   4 #define TARGET_TREE /* this target is using the target tree system */
   5
   6 /* For Rolo and boot loader */
   7 #define MODEL_NUMBER 29
   8
   9 #define MODEL_NAME   "Sandisk Sansa m200 series"
  10
  11 /* Enable FAT16 support */
  12 #define HAVE_FAT16SUPPORT
  13
  14 /* define this if you have recording possibility */
  15 //#define HAVE_RECORDING
  16
  17 /* Define bitmask of input sources - recordable bitmask can be defined
  18    explicitly if different */
  19 //#define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_LINEIN | SRC_CAP_SPDIF)
  20
  21 /* define this if you have a bitmap LCD display */
  22 #define HAVE_LCD_BITMAP
  23
  24 /* define this if you can flip your LCD */
  25 #define HAVE_LCD_FLIP
  26
  27 /* define this if you can invert the colours on your LCD */
  28 #define HAVE_LCD_INVERT
  29
  30 /* define this if you have access to the quickscreen */
  31 #define HAVE_QUICKSCREEN
  32 /* define this if you have access to the pitchscreen */
  33 #define HAVE_PITCHSCREEN
  34
  35 /* define this if you would like tagcache to build on this target */
  36 #define HAVE_TAGCACHE
  37
  38 /* define this if you have a flash memory storage */
  39 #define HAVE_FLASH_STORAGE
  40
  41 #define CONFIG_STORAGE STORAGE_NAND
  42
  43 #define CONFIG_NAND NAND_TCC
  44
  45 /* LCD dimensions */
  46 #define LCD_WIDTH  128
  47 #define LCD_HEIGHT 64
  48 #define LCD_DEPTH  1
  49
  50 #define LCD_PIXELFORMAT VERTICAL_PACKING
  51
  52 /* define this to indicate your device's keypad */
  53 #define CONFIG_KEYPAD SANSA_M200_PAD
  54
  55 /* define this if you have a real-time clock */
  56 #define CONFIG_RTC RTC_TCC77X
  57
  58 /* define this if you have RTC RAM available for settings */
  59 //#define HAVE_RTC_RAM
  60
  61 /* Define this if you have a software controlled poweroff */
  62 #define HAVE_SW_POWEROFF
  63
  64 /* The number of bytes reserved for loadable codecs */
  65 #define CODEC_SIZE 0x38000
  66
  67 /* The number of bytes reserved for loadable plugins */
  68 #define PLUGIN_BUFFER_SIZE 0x10000
  69
  70 #define AB_REPEAT_ENABLE 1
  71
  72 /* Define this if you do software codec */
  73 #define CONFIG_CODEC SWCODEC
  74
  75 /* Define this if you have the TLV320 audio codec */
  76 #define HAVE_TLV320
  77
  78 /* TLV320 has no tone controls, so we use the software ones */
  79 #define HAVE_SW_TONE_CONTROLS
  80
  81 /* Define this for LCD backlight available */
  82 #define HAVE_BACKLIGHT
  83
  84 #define CONFIG_I2C I2C_TCC77X
  85
  86 #define BATTERY_CAPACITY_DEFAULT 1500 /* default battery capacity */
  87 #define BATTERY_CAPACITY_MIN 1500 /* min. capacity selectable */
  88 #define BATTERY_CAPACITY_MAX 3200 /* max. capacity selectable */
  89 #define BATTERY_CAPACITY_INC 50   /* capacity increment */
  90 #define BATTERY_TYPES_COUNT  1    /* only one type */
  91
  92 /* define this if the unit should not shut down on low battery. */
  93 #define NO_LOW_BATTERY_SHUTDOWN
  94
  95 #ifndef SIMULATOR
  96
  97 /* Define this if you have a TCC770 */
  98 #define CONFIG_CPU TCC770
  99
 100 /* Define this if you have ATA power-off control */
 101 #define HAVE_ATA_POWER_OFF
 102
 103 /* Define this to the CPU frequency */
 104 #define CPU_FREQ      120000000
 105
 106 /* Offset ( in the firmware file's header ) to the file CRC */
 107 #define FIRMWARE_OFFSET_FILE_CRC 0
 108
 109 /* Offset ( in the firmware file's header ) to the real data */
 110 #define FIRMWARE_OFFSET_FILE_DATA 8
 111
 112 /* Software controlled LED */
 113 #define CONFIG_LED LED_VIRTUAL
 114
 115 #define CONFIG_LCD LCD_SSD1815
 116
 117 #define BOOTFILE_EXT "m200"
 118 #define BOOTFILE "rockbox." BOOTFILE_EXT
 119 #define BOOTDIR "/"
 120
 121 #define IBSS_ATTR_VOICE_STACK
 122 #define ICODE_ATTR_TREMOR_NOT_MDCT
 123 #define ICODE_ATTR_TREMOR_MDCT
 124 #define ICODE_ATTR_FLAC
 125 #define IBSS_ATTR_FLAC_DECODED0
 126 #define ICONST_ATTR_MPA_HUFFMAN
 127 #define IBSS_ATTR_MPC_SAMPLE_BUF
 128 #define ICODE_ATTR_ALAC
 129 #define IBSS_ATTR_SHORTEN_DECODED0
 130
 131 #endif /* SIMULATOR */