firmware/export/config/sansaclipv2.h

   1 /*
   2  * This config file is for the Sandisk Sansa Clip v2
   3  */
   4 #define TARGET_TREE /* this target is using the target tree system */
   5
   6 /* For Rolo and boot loader */
   7 #define MODEL_NUMBER 60
   8 #define MODEL_NAME   "Sandisk Sansa Clipv2"
   9 #define FIRMWARE_OFFSET_FILE_DATA 8
  10 #define FIRMWARE_OFFSET_FILE_CRC 0
  11
  12 #define HW_SAMPR_CAPS       SAMPR_CAP_ALL
  13
  14 /* define this if you have recording possibility */
  15 #define HAVE_RECORDING
  16
  17 #define REC_SAMPR_CAPS      SAMPR_CAP_ALL
  18
  19 /* Define bitmask of input sources - recordable bitmask can be defined
  20    explicitly if different */
  21 #define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_FMRADIO)
  22
  23 /* define this if you have a bitmap LCD display */
  24 #define HAVE_LCD_BITMAP
  25
  26 /* define this if you have a light associated with the buttons */
  27 #define HAVE_BUTTON_LIGHT
  28
  29 /* define this if you have access to the quickscreen */
  30 #define HAVE_QUICKSCREEN
  31
  32 /* define this if you have access to the pitchscreen */
  33 #define HAVE_PITCHSCREEN
  34
  35 /* define this if you would like tagcache to build on this target */
  36 #define HAVE_TAGCACHE
  37
  38 /* LCD dimensions */
  39 #define LCD_WIDTH  128
  40 #define LCD_HEIGHT 64
  41 #define LCD_DEPTH  1
  42
  43 #define LCD_PIXELFORMAT VERTICAL_PACKING
  44 #define HAVE_NEGATIVE_LCD /* bright on dark */
  45 #define HAVE_LCD_SPLIT    /* split display */
  46
  47 /* Display colours, for screenshots and sim (0xRRGGBB) */
  48 #define LCD_DARKCOLOR        0x000000
  49 #define LCD_BRIGHTCOLOR      0x000000
  50 #define LCD_BL_DARKCOLOR     0x000000
  51 #define LCD_BL_BRIGHTCOLOR   0x0de2e5
  52
  53 #define LCD_DARKCOLOR_2       0x000000
  54 #define LCD_BRIGHTCOLOR_2     0x000000
  55 #define LCD_BL_DARKCOLOR_2    0x000000
  56 #define LCD_BL_BRIGHTCOLOR_2  0xffe60f
  57
  58 #define LCD_SPLIT_POS    16
  59 #define LCD_SPLIT_LINES  2
  60
  61 /* define this if you have LCD enable function */
  62 #define HAVE_LCD_ENABLE
  63
  64 #ifndef BOOTLOADER
  65 /* Define this if your LCD can be put to sleep.
  66  * HAVE_LCD_ENABLE should be defined as well. */
  67 //#define HAVE_LCD_SLEEP
  68 //#define HAVE_LCD_SLEEP_SETTING
  69 #endif
  70
  71 /* define this if you can flip your LCD */
  72 #define HAVE_LCD_FLIP
  73
  74 /* define this if you can invert the pixels */
  75 #define HAVE_LCD_INVERT
  76
  77 /* Define this if your LCD can set contrast */
  78 #define HAVE_LCD_CONTRAST
  79
  80 #define MIN_CONTRAST_SETTING        0
  81 #define MAX_CONTRAST_SETTING        50
  82 #define DEFAULT_CONTRAST_SETTING    30
  83
  84 #define IRAM_LCDFRAMEBUFFER IDATA_ATTR /* put the lcd frame buffer in IRAM */
  85
  86 #define CONFIG_KEYPAD SANSA_CLIP_PAD
  87
  88 /* define this if the target has volume keys which can be used in the lists */
  89 #define HAVE_VOLUME_IN_LIST
  90
  91 /* Define this if you do software codec */
  92 #define CONFIG_CODEC SWCODEC
  93 /* There is no hardware tone control */
  94 #define HAVE_SW_TONE_CONTROLS
  95
  96 /* AS3514 or newer */
  97 #define HAVE_AS3514
  98 #define HAVE_AS3543
  99
 100 /* define this if you have a real-time clock */
 101 #ifndef BOOTLOADER
 102 #define CONFIG_RTC RTC_AS3514
 103 #endif
 104
 105 /* Define this if you have a software controlled poweroff */
 106 #define HAVE_SW_POWEROFF
 107
 108 #define HAVE_FAT16SUPPORT
 109
 110 /* The number of bytes reserved for loadable codecs */
 111 #define CODEC_SIZE (0x100000-0x8000)
 112
 113 /* The number of bytes reserved for loadable plugins */
 114 #define PLUGIN_BUFFER_SIZE 0x80000
 115
 116 #define AB_REPEAT_ENABLE 1
 117
 118 /* FM Tuner */
 119 #define CONFIG_TUNER SI4700 /* in fact SI4702 */
 120 //#define HAVE_TUNER_PWR_CTRL
 121
 122 /* Define this for LCD backlight available */
 123 #define HAVE_BACKLIGHT
 124
 125 /* define this if you have a flash memory storage */
 126 #define HAVE_FLASH_STORAGE
 127
 128 /* define this if the flash memory uses the SecureDigital Memory Card protocol */
 129 #define CONFIG_STORAGE STORAGE_SD
 130
 131 #define BATTERY_CAPACITY_DEFAULT 380    /* default battery capacity */
 132 #define BATTERY_CAPACITY_MIN 380        /* min. capacity selectable */
 133 #define BATTERY_CAPACITY_MAX 380        /* max. capacity selectable */
 134 #define BATTERY_CAPACITY_INC 0          /* capacity increment */
 135 #define BATTERY_TYPES_COUNT  1          /* only one type */
 136
 137 /* Charging implemented in a target-specific algorithm */
 138 #define CONFIG_CHARGING CHARGING_TARGET
 139
 140 /* define this if the unit can be powered or charged via USB */
 141 #define HAVE_USB_POWER
 142
 143 /** Non-simulator section **/
 144 #ifndef SIMULATOR
 145
 146 /* Define this if you have a AMS AS3525v2 SoC */
 147 #define CONFIG_CPU AS3525v2
 148
 149 /* Define this if you want to use the AS3525 i2c interface */
 150 #define CONFIG_I2C I2C_AS3525   /* FIXME : looks similar to AS353x interface */
 151
 152 /* define this if the hardware can be powered off while charging */
 153 /* Sansa can't be powered off while charging */
 154 /* #define HAVE_POWEROFF_WHILE_CHARGING */
 155
 156 /* The start address index for ROM builds */
 157 #define ROM_START 0x00000000
 158
 159 /* Define this to the CPU frequency */
 160 #define CPU_FREQ      240000000
 161
 162 /* Type of LCD */
 163 #define CONFIG_LCD LCD_SSD1303
 164
 165 #ifndef BOOTLOADER
 166
 167 #define USB_HANDLED_BY_OF
 168
 169 /* USB On-the-go */
 170 #define CONFIG_USBOTG USBOTG_AS3525
 171
 172 /* enable these for the experimental usb stack */
 173 #define HAVE_USBSTACK
 174 #define USB_VENDOR_ID 0x0781
 175 #define USB_PRODUCT_ID 0x7435
 176 #endif /* BOOTLOADER */
 177
 178 /* Virtual LED (icon) */
 179 #define CONFIG_LED LED_VIRTUAL
 180
 181 /* Define this if you have adjustable CPU frequency */
 182 //#define HAVE_ADJUSTABLE_CPU_FREQ
 183
 184 #define BOOTFILE_EXT    "sansa"
 185 #define BOOTFILE        "rockbox." BOOTFILE_EXT
 186 #define BOOTDIR "/.rockbox"
 187
 188 #define ICODE_ATTR_TREMOR_NOT_MDCT
 189
 190 #define INCLUDE_TIMEOUT_API
 191
 192 #endif /* SIMULATOR */
 193
 194 /** Port-specific settings **/
 195
 196 /* Main LCD backlight brightness range and defaults */
 197 #define MIN_BRIGHTNESS_SETTING      1
 198 #define MAX_BRIGHTNESS_SETTING     12
 199 #define DEFAULT_BRIGHTNESS_SETTING  6
 200
 201 /* Default recording levels */
 202 #define DEFAULT_REC_MIC_GAIN    23
 203 #define DEFAULT_REC_LEFT_GAIN   23
 204 #define DEFAULT_REC_RIGHT_GAIN  23
 205
 206 /* Define this if a programmable hotkey is mapped */
 207 //#define HAVE_HOTKEY