firmware/export/config/ipodmini1g.h

   1 /*
   2  * This config file is for the Apple iPod Mini (1st Gen)
   3  */
   4 #define TARGET_TREE /* this target is using the target tree system */
   5
   6 #define IPOD_ARCH 1
   7
   8 #define MODEL_NAME   "Apple iPod Mini 1g"
   9
  10 /* For Rolo and boot loader */
  11 #define MODEL_NUMBER 9
  12
  13 /* define this if you use an ATA controller */
  14 #define CONFIG_STORAGE STORAGE_ATA
  15
  16 /*define this if the ATA controller and method of USB access support LBA48 */
  17 #define HAVE_LBA48
  18
  19 /* define this if you have recording possibility */
  20 /*#define HAVE_RECORDING*/
  21
  22 /* define the bitmask of hardware sample rates */
  23 #define HW_SAMPR_CAPS   (SAMPR_CAP_96 | SAMPR_CAP_88 | SAMPR_CAP_48 | \
  24                          SAMPR_CAP_44 | SAMPR_CAP_32 | SAMPR_CAP_8)
  25
  26 /* define the bitmask of recording sample rates
  27 #define REC_SAMPR_CAPS  (SAMPR_CAP_96 | SAMPR_CAP_88 | SAMPR_CAP_48 | \
  28                          SAMPR_CAP_44 | SAMPR_CAP_32 | SAMPR_CAP_8) */
  29
  30 /* define this if you have a bitmap LCD display */
  31 #define HAVE_LCD_BITMAP
  32
  33 /* define this if you want album art for this target */
  34 #define HAVE_ALBUMART
  35
  36 /* define this to enable bitmap scaling */
  37 #define HAVE_BMP_SCALING
  38
  39 /* define this to enable JPEG decoding */
  40 #define HAVE_JPEG
  41
  42 /* define this if you can invert the colours on your LCD */
  43 #define HAVE_LCD_INVERT
  44
  45 /* define this if the LCD needs to be shutdown */
  46 #define HAVE_LCD_SHUTDOWN
  47
  48 /* define this if you have access to the quickscreen */
  49 #define HAVE_QUICKSCREEN
  50 /* define this if you have access to the pitchscreen */
  51 #define HAVE_PITCHSCREEN
  52
  53 /* define this if you would like tagcache to build on this target */
  54 #define HAVE_TAGCACHE
  55
  56 /* LCD dimensions */
  57 #define LCD_WIDTH  138
  58 #define LCD_HEIGHT 110
  59 #define LCD_DEPTH  2   /* 4 colours - 2bpp */
  60
  61 #define LCD_PIXELFORMAT HORIZONTAL_PACKING
  62
  63 /* Display colours, for screenshots and sim (0xRRGGBB) */
  64 #define LCD_DARKCOLOR       0x000000
  65 #define LCD_BRIGHTCOLOR     0x648764
  66 #define LCD_BL_DARKCOLOR    0x000000
  67 #define LCD_BL_BRIGHTCOLOR  0xdfd8ff
  68
  69 #define HAVE_LCD_CONTRAST
  70
  71 /* LCD contrast */
  72 #define MIN_CONTRAST_SETTING        5
  73 #define MAX_CONTRAST_SETTING        63
  74 #define DEFAULT_CONTRAST_SETTING    40 /* Match boot contrast */
  75
  76 /* define this if you can flip your LCD */
  77 #define HAVE_LCD_FLIP
  78
  79 #define CONFIG_KEYPAD IPOD_4G_PAD
  80
  81 #define HAVE_SCROLLWHEEL
  82
  83 /* Define this to enable morse code input */
  84 #define HAVE_MORSE_INPUT
  85
  86 /* Define this if you do software codec */
  87 #define CONFIG_CODEC SWCODEC
  88
  89 /* define this if you have a real-time clock */
  90 #define CONFIG_RTC RTC_PCF50605
  91
  92 /* Define if the device can wake from an RTC alarm */
  93 #define HAVE_RTC_ALARM
  94
  95 /* Define this if you can switch on/off the accessory power supply */
  96 #define HAVE_ACCESSORY_SUPPLY
  97
  98 /* Define this if you have a software controlled poweroff */
  99 #define HAVE_SW_POWEROFF
 100
 101 /* The number of bytes reserved for loadable codecs */
 102 #define CODEC_SIZE 0x100000
 103
 104 /* The number of bytes reserved for loadable plugins */
 105 #define PLUGIN_BUFFER_SIZE 0x80000
 106
 107 /* Define this if you have the WM8721 audio codec */
 108 #define HAVE_WM8731
 109
 110 /* WM8721 has no tone controls, so we use the software ones */
 111 #define HAVE_SW_TONE_CONTROLS
 112
 113 #define AB_REPEAT_ENABLE 1
 114 #define ACTION_WPSAB_SINGLE ACTION_WPS_BROWSE
 115
 116 /* define this if you have a disk storage, i.e. something
 117    that needs spinups and can cause skips when shaked */
 118 #define HAVE_DISK_STORAGE
 119
 120 /* Define this for LCD backlight available */
 121 #define HAVE_BACKLIGHT
 122
 123 /* We can fade the backlight by using PWM */
 124 #define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_PWM
 125
 126 /* Define this if you can detect headphones */
 127 #define HAVE_HEADPHONE_DETECTION
 128
 129 #define BATTERY_CAPACITY_DEFAULT 400 /* default battery capacity */
 130 #define BATTERY_CAPACITY_MIN     400 /* min. capacity selectable */
 131 #define BATTERY_CAPACITY_MAX    1000 /* max. capacity selectable */
 132 #define BATTERY_CAPACITY_INC      10 /* capacity increment */
 133 #define BATTERY_TYPES_COUNT        1 /* only one type */
 134
 135 /* define current usage levels */
 136 #define CURRENT_NORMAL     50  /* PP5024 uses ~40mA, so add some for disk */
 137 #define CURRENT_BACKLIGHT  20  /* FIXME: This needs to be measured */
 138 #define CURRENT_RECORD    110  /* FIXME: Needs to be measured */
 139
 140 /* Hardware controlled charging? */
 141 #define CONFIG_CHARGING CHARGING_MONITOR
 142
 143 /* define this if the unit can be powered or charged via USB */
 144 #define HAVE_USB_POWER
 145
 146 /* define this if the unit can have USB charging disabled by user -
 147 :Qa
 148  * if USB/MAIN power is discernable and hardware doesn't compel charging */
 149 #define HAVE_USB_CHARGING_ENABLE
 150
 151 /* Define this if you have a PortalPlayer PP5020 */
 152 #define CONFIG_CPU PP5020
 153
 154 /* Define this if you want to use the PP5020 i2c interface */
 155 #define CONFIG_I2C I2C_PP5020
 156
 157 /* We're able to shut off power to the HDD */
 158 #define HAVE_ATA_POWER_OFF
 159
 160 /* define this if the hardware can be powered off while charging */
 161 //#define HAVE_POWEROFF_WHILE_CHARGING
 162
 163 /* The start address index for ROM builds */
 164 #define ROM_START 0x00000000
 165
 166 /* The size of the flash ROM */
 167 #define FLASH_SIZE 0x100000
 168
 169 /* Define this to the CPU frequency */
 170 #define CPU_FREQ      11289600
 171
 172 #define CONFIG_LCD LCD_IPODMINI
 173
 174 /* Offset ( in the firmware file's header ) to the file length */
 175 #define FIRMWARE_OFFSET_FILE_LENGTH 0
 176
 177 /* Offset ( in the firmware file's header ) to the file CRC */
 178 #define FIRMWARE_OFFSET_FILE_CRC 0
 179
 180 /* Offset ( in the firmware file's header ) to the real data */
 181 #define FIRMWARE_OFFSET_FILE_DATA 8
 182
 183 /* USB On-the-go */
 184 #define CONFIG_USBOTG USBOTG_ARC
 185
 186 /* enable these for the experimental usb stack */
 187 #define HAVE_USBSTACK
 188 #define USE_ROCKBOX_USB
 189 #define USB_VENDOR_ID 0x05ac
 190 #define USB_PRODUCT_ID 0x1205
 191 #define HAVE_USB_HID_MOUSE
 192
 193 /* Define this if you have adjustable CPU frequency */
 194 #define HAVE_ADJUSTABLE_CPU_FREQ
 195
 196 #define BOOTFILE_EXT "ipod"
 197 #define BOOTFILE "rockbox." BOOTFILE_EXT
 198 #define BOOTDIR "/.rockbox"
 199
 200 #define ICODE_ATTR_TREMOR_NOT_MDCT
 201
 202 #define IRAM_LCDFRAMEBUFFER IBSS_ATTR /* put the lcd frame buffer in IRAM */
 203
 204
 205 /* DMA is used only for reading on PP502x because although reads are ~8x faster
 206  * writes appear to be ~25% slower.
 207  */
 208 #define HAVE_ATA_DMA
 209
 210 /* Define this if a programmable hotkey is mapped */
 211 #define HAVE_HOTKEY