firmware/export/config/sansafuze.h

   1 /*
   2  * This config file is for the Sandisk Sansa Fuze
   3  */
   4 #define TARGET_TREE /* this target is using the target tree system */
   5
   6 /* For Rolo and boot loader */
   7 #define MODEL_NUMBER 43
   8 #define MODEL_NAME   "Sandisk Sansa Fuze"
   9
  10 #define HW_SAMPR_CAPS       SAMPR_CAP_ALL
  11
  12 /* define this if you have recording possibility */
  13 #define HAVE_RECORDING
  14
  15 #define REC_SAMPR_CAPS      SAMPR_CAP_ALL
  16
  17 /* Default recording levels */
  18 #define DEFAULT_REC_MIC_GAIN    23
  19 #define DEFAULT_REC_LEFT_GAIN   23
  20 #define DEFAULT_REC_RIGHT_GAIN  23
  21
  22 /* Define bitmask of input sources - recordable bitmask can be defined
  23    explicitly if different */
  24 #define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_FMRADIO)
  25
  26 /* define this if you have a bitmap LCD display */
  27 #define HAVE_LCD_BITMAP
  28 /* define this if you have a colour LCD */
  29 #define HAVE_LCD_COLOR
  30
  31 #ifndef BOOTLOADER/* define this if you want album art for this target */
  32 #define HAVE_ALBUMART
  33
  34 /* define this to enable bitmap scaling */
  35 #define HAVE_BMP_SCALING
  36
  37 /* define this to enable JPEG decoding */
  38 #define HAVE_JPEG
  39
  40 /* define this if you have a light associated with the buttons */
  41 #define HAVE_BUTTON_LIGHT
  42
  43 /* define this if you have access to the quickscreen */
  44 #define HAVE_QUICKSCREEN
  45
  46 /* define this if you have access to the pitchscreen */
  47 #define HAVE_PITCHSCREEN
  48
  49 /* define this if you would like tagcache to build on this target */
  50 #define HAVE_TAGCACHE
  51
  52 /* define this if you have LCD enable function */
  53 #define HAVE_LCD_ENABLE
  54
  55 /* Define this if your LCD can be put to sleep. HAVE_LCD_ENABLE
  56    should be defined as well.
  57 #define HAVE_LCD_SLEEP
  58 #define HAVE_LCD_SLEEP_SETTING
  59 */
  60
  61 /* define this if you can flip your LCD */
  62 #define HAVE_LCD_FLIP
  63
  64 /* define this if you can invert the colours on your LCD */
  65 #define HAVE_LCD_INVERT
  66
  67 #ifndef BOOTLOADER
  68 /* define this if you have a real-time clock */
  69 #define CONFIG_RTC RTC_AS3514
  70 #endif
  71
  72 /* There is no hardware tone control */
  73 #define HAVE_SW_TONE_CONTROLS
  74
  75 #endif /* !BOOTLOADER */
  76
  77 /* put the lcd frame buffer in IRAM */
  78 #define IRAM_LCDFRAMEBUFFER IBSS_ATTR
  79
  80 #define CONFIG_KEYPAD SANSA_FUZE_PAD
  81
  82 /* Define this to enable morse code input */
  83 #define HAVE_MORSE_INPUT
  84
  85 /* Define this if you do software codec */
  86 #define CONFIG_CODEC SWCODEC
  87
  88
  89 /* LCD dimensions */
  90 #define LCD_WIDTH  220
  91 #define LCD_HEIGHT 176
  92 #define LCD_DEPTH  16   /* 65536 colours */
  93 #define LCD_PIXELFORMAT RGB565 /* rgb565 */
  94
  95
  96 /* We're working on the assumption that the AS3525 has something
  97    similar to the AS3514 for audio codec etc */
  98 #define HAVE_AS3514
  99
 100 /* Define this if you have a software controlled poweroff */
 101 #define HAVE_SW_POWEROFF
 102
 103 /* Some Sansa Fuzes seem to be FAT16 formatted */
 104 #define HAVE_FAT16SUPPORT
 105
 106 /* The number of bytes reserved for loadable codecs */
 107 #define CODEC_SIZE 0x100000
 108
 109 /* The number of bytes reserved for loadable plugins */
 110 #define PLUGIN_BUFFER_SIZE 0x80000
 111
 112 #define AB_REPEAT_ENABLE 1
 113
 114 /* FM Tuner - suspected to be the SI4702 */
 115 #define CONFIG_TUNER SI4700
 116 /* #define HAVE_TUNER_PWR_CTRL */
 117
 118 /* Define this for LCD backlight available */
 119 #define HAVE_BACKLIGHT
 120 #define HAVE_BACKLIGHT_BRIGHTNESS
 121
 122 /* Main LCD backlight brightness range and defaults */
 123 #define MIN_BRIGHTNESS_SETTING      1
 124 #define MAX_BRIGHTNESS_SETTING     12
 125 #define DEFAULT_BRIGHTNESS_SETTING  6
 126
 127 /* Which backlight fading type? */
 128 #define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_SW_SETTING
 129
 130 /* define this if the unit uses a scrollwheel for navigation */
 131 #define HAVE_SCROLLWHEEL
 132 /* define to activate advanced wheel acceleration code */
 133 #define HAVE_WHEEL_ACCELERATION
 134 /* define from which rotation speed [degree/sec] on the acceleration starts */
 135 #define WHEEL_ACCEL_START 540
 136 /* define type of acceleration (1 = ^2, 2 = ^3, 3 = ^4) */
 137 #define WHEEL_ACCELERATION 1
 138
 139 /* define this if you have a flash memory storage */
 140 #define HAVE_FLASH_STORAGE
 141
 142 /* define this if the flash memory uses the SecureDigital Memory Card protocol */
 143 #define CONFIG_STORAGE STORAGE_SD
 144
 145 #define BATTERY_CAPACITY_DEFAULT 550    /* default battery capacity */
 146 #define BATTERY_CAPACITY_MIN 550        /* min. capacity selectable */
 147 #define BATTERY_CAPACITY_MAX 550        /* max. capacity selectable */
 148 #define BATTERY_CAPACITY_INC 0          /* capacity increment */
 149 #define BATTERY_TYPES_COUNT  1          /* only one type */
 150
 151 /* Charging implemented in a target-specific algorithm */
 152 #define CONFIG_CHARGING CHARGING_TARGET
 153
 154 /* define this if the unit can be powered or charged via USB */
 155 #define HAVE_USB_POWER
 156
 157 /* Define this if you have an AMS AS3525*/
 158 #define CONFIG_CPU AS3525
 159
 160 /* Define how much SD sectors are reserved for OF */
 161 #define AMS_OF_SIZE 0xF000
 162
 163 /* Define this if you want to use the AS2525 i2c interface */
 164 #define CONFIG_I2C I2C_AS3525
 165
 166 /* define current usage levels (based on battery bench) */
 167 #define CURRENT_NORMAL     37
 168 #define CURRENT_BACKLIGHT  30
 169 #define CURRENT_RECORD     CURRENT_NORMAL
 170
 171 /* Define this to the CPU frequency */
 172 #define CPU_FREQ      248000000
 173
 174 /* Type of LCD */
 175 #define CONFIG_LCD LCD_FUZE
 176
 177 /* Offset ( in the firmware file's header ) to the file CRC and data. These are
 178    only used when loading the old format rockbox.e200 file */
 179 #define FIRMWARE_OFFSET_FILE_CRC    0x0
 180 #define FIRMWARE_OFFSET_FILE_DATA   0x8
 181
 182 #ifndef BOOTLOADER
 183 #define HAVE_MULTIDRIVE
 184 #define NUM_DRIVES 2
 185 #define HAVE_HOTSWAP
 186 #endif
 187
 188 /* USB On-the-go */
 189 #define CONFIG_USBOTG USBOTG_AS3525
 190
 191 /* enable these for the experimental usb stack */
 192 #define HAVE_USBSTACK
 193 //#define USB_HANDLED_BY_OF
 194 #define USE_ROCKBOX_USB
 195 #define USB_VENDOR_ID 0x0781
 196 #define USB_PRODUCT_ID 0x74c1
 197 #define HAVE_USB_HID_MOUSE
 198
 199 /* Define this if you have adjustable CPU frequency */
 200 #define HAVE_ADJUSTABLE_CPU_FREQ
 201
 202 #define BOOTFILE_EXT    "sansa"
 203 #define BOOTFILE        "rockbox." BOOTFILE_EXT
 204 #define BOOTDIR "/.rockbox"
 205
 206 #define ICODE_ATTR_TREMOR_NOT_MDCT
 207
 208 #define INCLUDE_TIMEOUT_API
 209
 210 /* Define this if a programmable hotkey is mapped */
 211 #define HAVE_HOTKEY