firmware/export/config/ipodmini2g.h

   1 /*
   2  * This config file is for the Apple iPod Mini 2nd Gen
   3  */
   4 #define TARGET_TREE /* this target is using the target tree system */
   5
   6 #define IPOD_ARCH 1
   7
   8 #define MODEL_NAME   "Apple iPod Mini 2g"
   9
  10 /* For Rolo and boot loader */
  11 #define MODEL_NUMBER 11
  12
  13 /* define this if you use an ATA controller */
  14 #define CONFIG_STORAGE STORAGE_ATA
  15
  16 /* define this if you have recording possibility */
  17 /*#define HAVE_RECORDING*/
  18
  19 /* define the bitmask of hardware sample rates */
  20 #define HW_SAMPR_CAPS   (SAMPR_CAP_96 | SAMPR_CAP_88 | SAMPR_CAP_48 | \
  21                          SAMPR_CAP_44 | SAMPR_CAP_32 | SAMPR_CAP_8)
  22
  23 /* define the bitmask of recording sample rates
  24 #define REC_SAMPR_CAPS  (SAMPR_CAP_96 | SAMPR_CAP_88 | SAMPR_CAP_48 | \
  25                          SAMPR_CAP_44 | SAMPR_CAP_32 | SAMPR_CAP_8) */
  26
  27 /* define this if you have a bitmap LCD display */
  28 #define HAVE_LCD_BITMAP
  29
  30 /* define this if you want album art for this target */
  31 #define HAVE_ALBUMART
  32
  33 /* define this to enable bitmap scaling */
  34 #define HAVE_BMP_SCALING
  35
  36 /* define this to enable JPEG decoding */
  37 #define HAVE_JPEG
  38
  39 /* define this if you can invert the colours on your LCD */
  40 #define HAVE_LCD_INVERT
  41
  42 /* define this if the LCD needs to be shutdown */
  43 #define HAVE_LCD_SHUTDOWN
  44
  45 /* define this if you have access to the quickscreen */
  46 #define HAVE_QUICKSCREEN
  47 /* define this if you have access to the pitchscreen */
  48 #define HAVE_PITCHSCREEN
  49
  50 /* define this if you would like tagcache to build on this target */
  51 #define HAVE_TAGCACHE
  52
  53 /* LCD dimensions */
  54 #define LCD_WIDTH  138
  55 #define LCD_HEIGHT 110
  56 #define LCD_DEPTH  2   /* 4 colours - 2bpp */
  57
  58 #define LCD_PIXELFORMAT HORIZONTAL_PACKING
  59
  60 /* Display colours, for screenshots and sim (0xRRGGBB) */
  61 #define LCD_DARKCOLOR       0x000000
  62 #define LCD_BRIGHTCOLOR     0x648764
  63 #define LCD_BL_DARKCOLOR    0x000000
  64 #define LCD_BL_BRIGHTCOLOR  0xdfd8ff
  65
  66 #define HAVE_LCD_CONTRAST
  67
  68 /* LCD contrast */
  69 #define MIN_CONTRAST_SETTING        5
  70 #define MAX_CONTRAST_SETTING        63
  71 #define DEFAULT_CONTRAST_SETTING    40 /* Match boot contrast */
  72
  73 /* define this if you can flip your LCD */
  74 #define HAVE_LCD_FLIP
  75
  76 #define CONFIG_KEYPAD IPOD_4G_PAD
  77
  78 /* Define this to enable morse code input */
  79 #define HAVE_MORSE_INPUT
  80
  81 /* Define this if you do software codec */
  82 #define CONFIG_CODEC SWCODEC
  83
  84 /* define this if you have a real-time clock */
  85 #define CONFIG_RTC RTC_PCF50605
  86
  87 /* Define if the device can wake from an RTC alarm */
  88 #define HAVE_RTC_ALARM
  89
  90 /* Define this if you can switch on/off the accessory power supply */
  91 #define HAVE_ACCESSORY_SUPPLY
  92
  93 /* Define this if you have a software controlled poweroff */
  94 #define HAVE_SW_POWEROFF
  95
  96 /* The number of bytes reserved for loadable codecs */
  97 #define CODEC_SIZE 0x100000
  98
  99 /* The number of bytes reserved for loadable plugins */
 100 #define PLUGIN_BUFFER_SIZE 0x80000
 101
 102 /* Define this if you have the WM8711 audio codec */
 103 #define HAVE_WM8711
 104
 105 /* WM8721 has no tone controls, so we use the software ones */
 106 #define HAVE_SW_TONE_CONTROLS
 107
 108 #define AB_REPEAT_ENABLE 1
 109 #define ACTION_WPSAB_SINGLE ACTION_WPS_BROWSE
 110
 111 /* define this if you have a disk storage, i.e. something
 112    that needs spinups and can cause skips when shaked */
 113 #define HAVE_DISK_STORAGE
 114
 115 /* Define this for LCD backlight available */
 116 #define HAVE_BACKLIGHT
 117
 118 /* We can fade the backlight by using PWM */
 119 #define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_PWM
 120
 121 /* define this if the unit uses a scrollwheel for navigation */
 122 #define HAVE_SCROLLWHEEL
 123 /* define to activate advanced wheel acceleration code */
 124 #define HAVE_WHEEL_ACCELERATION
 125 /* define from which rotation speed [degree/sec] on the acceleration starts */
 126 #define WHEEL_ACCEL_START 270
 127 /* define type of acceleration (1 = ^2, 2 = ^3, 3 = ^4) */
 128 #define WHEEL_ACCELERATION 3
 129
 130 /* Define this if you can detect headphones */
 131 #define HAVE_HEADPHONE_DETECTION
 132
 133 #define BATTERY_CAPACITY_DEFAULT 400 /* default battery capacity */
 134 #define BATTERY_CAPACITY_MIN     400 /* min. capacity selectable */
 135 #define BATTERY_CAPACITY_MAX    1000 /* max. capacity selectable */
 136 #define BATTERY_CAPACITY_INC      50 /* capacity increment */
 137 #define BATTERY_TYPES_COUNT        1 /* only one type */
 138
 139 /* define current usage levels */
 140 #define CURRENT_NORMAL     50  /* PP5024 uses ~40mA, so add some for disk */
 141 #define CURRENT_BACKLIGHT  20  /* FIXME: This needs to be measured */
 142 #define CURRENT_RECORD    110  /* FIXME: Needs to be measured */
 143
 144 /* Hardware controlled charging? */
 145 #define CONFIG_CHARGING CHARGING_MONITOR
 146
 147 /* define this if the unit can be powered or charged via USB */
 148 #define HAVE_USB_POWER
 149
 150 /* Define this if you have a PortalPlayer PP5022 */
 151 #define CONFIG_CPU PP5022
 152
 153 /* Define this if you want to use the PP5020 i2c interface */
 154 #define CONFIG_I2C I2C_PP5020
 155
 156 /* We're able to shut off power to the HDD */
 157 #define HAVE_ATA_POWER_OFF
 158
 159 /* define this if the hardware can be powered off while charging */
 160 //#define HAVE_POWEROFF_WHILE_CHARGING
 161
 162 /* The start address index for ROM builds */
 163 #define ROM_START 0x00000000
 164
 165 /* The size of the flash ROM */
 166 #define FLASH_SIZE 0x100000
 167
 168 /* Define this to the CPU frequency */
 169 #define CPU_FREQ      11289600
 170
 171 #define CONFIG_LCD LCD_IPODMINI
 172
 173 /* Offset ( in the firmware file's header ) to the file length */
 174 #define FIRMWARE_OFFSET_FILE_LENGTH 0
 175
 176 /* Offset ( in the firmware file's header ) to the file CRC */
 177 #define FIRMWARE_OFFSET_FILE_CRC 0
 178
 179 /* Offset ( in the firmware file's header ) to the real data */
 180 #define FIRMWARE_OFFSET_FILE_DATA 8
 181
 182 /* USB On-the-go */
 183 #define CONFIG_USBOTG USBOTG_ARC
 184
 185 /* enable these for the experimental usb stack */
 186 #define HAVE_USBSTACK
 187 #define USE_ROCKBOX_USB
 188 #define USB_VENDOR_ID 0x05ac
 189 #define USB_PRODUCT_ID 0x1205
 190 #define HAVE_USB_HID_MOUSE
 191
 192 /* Define this if you have adjustable CPU frequency */
 193 #define HAVE_ADJUSTABLE_CPU_FREQ
 194
 195 /* Define this if you can read an absolute wheel position */
 196 #define HAVE_WHEEL_POSITION
 197
 198 #define BOOTFILE_EXT "ipod"
 199 #define BOOTFILE "rockbox." BOOTFILE_EXT
 200 #define BOOTDIR "/.rockbox"
 201
 202 #define ICODE_ATTR_TREMOR_NOT_MDCT
 203
 204 #define IRAM_LCDFRAMEBUFFER IBSS_ATTR /* put the lcd frame buffer in IRAM */
 205
 206
 207 /* DMA is used only for reading on PP502x because although reads are ~8x faster
 208  * writes appear to be ~25% slower.
 209  */
 210 #define HAVE_ATA_DMA