firmware/export/config-yh820.h

   1 /*
   2  * This config file is for the Samsung YH-820
   3  */
   4
   5 #define TARGET_TREE /* this target is using the target tree system */
   6
   7 /* For Rolo and boot loader */
   8 #define MODEL_NUMBER 57
   9 #define MODEL_NAME   "Samsung YH-820"
  10
  11 /* define this if you have recording possibility */
  12 /* todo #define HAVE_RECORDING */
  13
  14 /* Define bitmask of input sources - recordable bitmask can be defined
  15    explicitly if different */
  16 #define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_LINEIN )
  17
  18 /* define the bitmask of hardware sample rates */
  19 #define HW_SAMPR_CAPS   (SAMPR_CAP_48 | SAMPR_CAP_44 | SAMPR_CAP_32 | \
  20                          SAMPR_CAP_24 | SAMPR_CAP_22 | SAMPR_CAP_16 | \
  21                          SAMPR_CAP_11 | SAMPR_CAP_8)
  22
  23 /* define the bitmask of recording sample rates */
  24 #define REC_SAMPR_CAPS  (SAMPR_CAP_48 | SAMPR_CAP_44 | SAMPR_CAP_32 | \
  25                          SAMPR_CAP_24 | SAMPR_CAP_22 | SAMPR_CAP_16 | \
  26                          SAMPR_CAP_11 | SAMPR_CAP_8)
  27
  28 /* Type of LCD */
  29 #define CONFIG_LCD LCD_S6B33B2
  30
  31 /* LCD dimensions */
  32 #define LCD_WIDTH  128
  33 #define LCD_HEIGHT 96
  34 #define LCD_DEPTH  16   /* 65536 colours */
  35 #define LCD_PIXELFORMAT RGB565
  36
  37 #ifndef BOOTLOADER
  38
  39 /* define this if you have a real-time clock */
  40 #define CONFIG_RTC RTC_E8564
  41 /* TODO ??? */
  42 //#define HAVE_RTC_ALARM
  43
  44 /* Define this if your LCD can be enabled/disabled */
  45 #define HAVE_LCD_ENABLE
  46
  47 /* Define this if your LCD can be put to sleep.
  48    HAVE_LCD_ENABLE should be defined as well. */
  49 /* todo #define HAVE_LCD_SLEEP*/
  50 /* todo #define HAVE_LCD_SLEEP_SETTING */
  51 #endif /* !BOOTLOADER */
  52
  53 /* Define this for LCD backlight available */
  54 #define HAVE_BACKLIGHT
  55
  56 /* Define this if your LCD can set contrast */
  57 #define HAVE_LCD_CONTRAST
  58
  59 #define MIN_CONTRAST_SETTING        0
  60 #define MAX_CONTRAST_SETTING        255
  61 #define DEFAULT_CONTRAST_SETTING    137
  62
  63 /* define this if you can flip your LCD */
  64 /* #define HAVE_LCD_FLIP */
  65
  66 /* define this if you can invert the colours on your LCD */
  67 /* todo #define HAVE_LCD_INVERT */
  68
  69 /* put the lcd frame buffer in IRAM */
  70 /* #define IRAM_LCDFRAMEBUFFER IDATA_ATTR */
  71
  72 /* define this if you have a bitmap LCD display */
  73 #define HAVE_LCD_BITMAP
  74
  75 /* define this if you have a colour LCD */
  76 #define HAVE_LCD_COLOR
  77
  78 /* define this if you want album art for this target */
  79 #define HAVE_ALBUMART
  80
  81 /* define this to enable bitmap scaling */
  82 #define HAVE_BMP_SCALING
  83
  84 /* define this to enable JPEG decoding */
  85 #define HAVE_JPEG
  86
  87 /* define this if you have access to the quickscreen */
  88 #define HAVE_QUICKSCREEN
  89
  90 /* define this if you have access to the pitchscreen */
  91 #define HAVE_PITCHSCREEN
  92
  93 /* define this if you would like tagcache to build on this target */
  94 #define HAVE_TAGCACHE
  95
  96 #define CONFIG_KEYPAD SAMSUNG_YH_PAD
  97
  98 /* Define this if you do software codec */
  99 #define CONFIG_CODEC SWCODEC
 100
 101 /* define this if you have a disk storage, i.e. something
 102    that needs spinups and can cause skips when shaked */
 103 #define HAVE_DISK_STORAGE
 104
 105 /* define this if you use an ATA controller */
 106 #define CONFIG_STORAGE STORAGE_ATA
 107
 108 /* We're able to shut off power to the HDD */
 109 #ifndef SIMULATOR
 110 /* todo #define HAVE_ATA_POWER_OFF */
 111 #endif
 112
 113 /* Define this if you have a software controlled poweroff */
 114 #define HAVE_SW_POWEROFF
 115
 116 /* The number of bytes reserved for loadable codecs */
 117 #define CODEC_SIZE 0x100000
 118
 119 /* The number of bytes reserved for loadable plugins */
 120 #define PLUGIN_BUFFER_SIZE 0x80000
 121
 122 /* Define this if you have the AK4537 audio codec */
 123 #define HAVE_AK4537
 124
 125 /* AK4537 has no tone controls, so we use the software ones */
 126 #define HAVE_SW_TONE_CONTROLS
 127
 128 #define AB_REPEAT_ENABLE 1
 129
 130 #define BATTERY_CAPACITY_DEFAULT 1550 /* default battery capacity */
 131 #define BATTERY_CAPACITY_MIN 1500  /* min. capacity selectable */
 132 #define BATTERY_CAPACITY_MAX 3200 /* max. capacity selectable */
 133 #define BATTERY_CAPACITY_INC 50   /* capacity increment */
 134 #define BATTERY_TYPES_COUNT  1    /* only one type */
 135
 136 /* Hardware controlled charging */
 137 #define CONFIG_CHARGING CHARGING_SIMPLE
 138
 139 /* define this if the unit can be powered or charged via USB */
 140 #define HAVE_USB_POWER
 141
 142 #ifndef SIMULATOR
 143
 144 /* Define this if you have a PortalPlayer PP5020 */
 145 #define CONFIG_CPU PP5020
 146
 147 /* Define this if you want to use the PP5020 i2c interface */
 148 #define CONFIG_I2C I2C_PP5020
 149
 150 /* define this if the hardware can be powered off while charging */
 151 #define HAVE_POWEROFF_WHILE_CHARGING
 152
 153 /* The start address index for ROM builds */
 154 #define ROM_START 0x00000000
 155
 156 /* The size of the flash ROM */
 157 #define FLASH_SIZE 0x100000
 158
 159 /* Define this to the CPU frequency */
 160 #define CPU_FREQ      75000000
 161
 162 /* USB On-the-go */
 163 #define CONFIG_USBOTG USBOTG_ARC
 164
 165 /* enable these for the experimental usb stack */
 166 #define HAVE_USBSTACK
 167 #define USE_ROCKBOX_USB
 168 /* todo - check */
 169 #define USB_VENDOR_ID   0x04e8
 170 #define USB_PRODUCT_ID  0x5023
 171
 172 /* Define this if you have adjustable CPU frequency */
 173 #define HAVE_ADJUSTABLE_CPU_FREQ
 174
 175 #define MI4_FORMAT
 176 #define BOOTFILE_EXT    "mi4"
 177 #define BOOTFILE        "rockbox." BOOTFILE_EXT
 178 #define BOOTDIR "/.rockbox"
 179
 180 /* Offset ( in the firmware file's header ) to the file CRC */
 181 #define FIRMWARE_OFFSET_FILE_CRC    0x00
 182
 183 /* Offset ( in the firmware file's header ) to the real data */
 184 #define FIRMWARE_OFFSET_FILE_DATA   0x00
 185
 186 #define ICODE_ATTR_TREMOR_NOT_MDCT
 187
 188 #endif /* !SIMULATOR */