firmware/export/config-mrobe500.h

   1 /***************************************************************************
   2  *             __________               __   ___.
   3  *   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
   4  *   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
   5  *   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
   6  *   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
   7  *                     \/            \/     \/    \/            \/
   8  * $Id$
   9  *
  10  * Copyright (C) 2007 by Karl Kurbjun
  11  *
  12  * This program is free software; you can redistribute it and/or
  13  * modify it under the terms of the GNU General Public License
  14  * as published by the Free Software Foundation; either version 2
  15  * of the License, or (at your option) any later version.
  16  *
  17  * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
  18  * KIND, either express or implied.
  19  *
  20  ****************************************************************************/
  21
  22 /*
  23  * This config file is for the M:Robe 500i
  24  */
  25 #define TARGET_TREE /* this target is using the target tree system */
  26
  27 #define CONFIG_SDRAM_START 0x00900000
  28
  29 #define OLYMPUS_MROBE_500 1
  30 #define MODEL_NAME   "Olympus M:Robe 500i"
  31
  32 /* For Rolo and boot loader */
  33 #define MODEL_NUMBER 22
  34
  35 /* define this if you use an ATA controller */
  36 #define CONFIG_STORAGE STORAGE_ATA
  37
  38 /* Define this to add support for ATA DMA */
  39 //#define HAVE_ATA_DMA
  40
  41 /* define this if you have a bitmap LCD display */
  42 #define HAVE_LCD_BITMAP
  43
  44 /* define this if you have a colour LCD */
  45 #define HAVE_LCD_COLOR
  46
  47 /* define this if you want album art for this target */
  48 #define HAVE_ALBUMART
  49
  50 /* define this to enable bitmap scaling */
  51 #define HAVE_BMP_SCALING
  52
  53 /* define this to enable JPEG decoding */
  54 #define HAVE_JPEG
  55
  56 /* define this if you have access to the quickscreen */
  57 #define HAVE_QUICKSCREEN
  58
  59 /* define this if you have access to the pitchscreen */
  60 #define HAVE_PITCHSCREEN
  61
  62 /* define this if you would like tagcache to build on this target */
  63 #define HAVE_TAGCACHE
  64
  65 /* define this if the target has volume keys which can be used in the lists */
  66 #define HAVE_VOLUME_IN_LIST
  67
  68 /* LCD dimensions */
  69 #define CONFIG_LCD LCD_MROBE500
  70
  71 /* These defines are used internal to this header */
  72 #define _LCD_RES_QVGA       1
  73 #define _LCD_RES_VGA        2
  74 #define _LCD_PORTRAIT       1
  75 #define _LCD_LANDSCAPE      2
  76
  77 /* Setup the resolution and orientation */
  78 #define _RESOLUTION         _LCD_RES_VGA
  79 #define _ORIENTATION        _LCD_LANDSCAPE
  80
  81 #if _RESOLUTION == _LCD_RES_VGA
  82 #define LCD_NATIVE_WIDTH 480
  83 #define LCD_NATIVE_HEIGHT 640
  84 #else
  85 #define LCD_NATIVE_WIDTH 240
  86 #define LCD_NATIVE_HEIGHT 320
  87 #endif
  88
  89 /* choose the lcd orientation. CONFIG_ORIENTATION defined in config.h */
  90 #if _ORIENTATION == _LCD_PORTRAIT
  91 /* This is the Portrait setup */
  92 #define LCD_WIDTH  LCD_NATIVE_WIDTH
  93 #define LCD_HEIGHT LCD_NATIVE_HEIGHT
  94 #else
  95 /* Frame buffer stride */
  96 #define LCD_STRIDEFORMAT    VERTICAL_STRIDE
  97
  98 /* This is the Landscape setup */
  99 #define LCD_WIDTH  LCD_NATIVE_HEIGHT
 100 #define LCD_HEIGHT LCD_NATIVE_WIDTH
 101 #endif
 102
 103 #define LCD_DEPTH  16   /* 65k colours */
 104 #define LCD_PIXELFORMAT RGB565 /* rgb565 */
 105
 106 #define MAX_ICON_HEIGHT 35
 107 #define MAX_ICON_WIDTH 35
 108
 109 /* Define this if your LCD can be put to sleep. HAVE_LCD_ENABLE
 110    should be defined as well. */
 111 #define HAVE_LCD_SLEEP
 112 #define HAVE_LCD_SLEEP_SETTING
 113
 114 /* remote LCD */
 115 #define HAVE_REMOTE_LCD
 116 #define LCD_REMOTE_WIDTH  79
 117 #define LCD_REMOTE_HEIGHT 16
 118 #define LCD_REMOTE_DEPTH  1
 119
 120 /* Remote display colours, for screenshots and sim (0xRRGGBB) */
 121 #define LCD_REMOTE_DARKCOLOR       0x000000
 122 #define LCD_REMOTE_BRIGHTCOLOR     0x5a915a
 123 #define LCD_REMOTE_BL_DARKCOLOR    0x000000
 124 #define LCD_REMOTE_BL_BRIGHTCOLOR  0x82b4fa
 125
 126 #define LCD_REMOTE_PIXELFORMAT VERTICAL_PACKING
 127
 128 #define CONFIG_REMOTE_KEYPAD MROBE_REMOTE
 129
 130 #define MIN_REMOTE_CONTRAST_SETTING     0
 131 #define MAX_REMOTE_CONTRAST_SETTING     15
 132 #define DEFAULT_REMOTE_CONTRAST_SETTING 7
 133
 134 #define CONFIG_KEYPAD MROBE500_PAD
 135 #define HAVE_TOUCHSCREEN
 136 #define HAVE_BUTTON_DATA
 137
 138 /* define this if the target has volume keys which can be used in the lists */
 139 #define HAVE_VOLUME_IN_LIST
 140
 141 /* Define this if you do software codec */
 142 #define CONFIG_CODEC SWCODEC
 143
 144 //#define HAVE_HARDWARE_BEEP
 145
 146 /* There is no hardware tone control */
 147 #define HAVE_SW_TONE_CONTROLS
 148
 149 /* define this if you have a real-time clock */
 150 #define CONFIG_RTC RTC_RX5X348AB
 151
 152 /* define this if you have a disk storage, i.e. something
 153    that needs spinups and can cause skips when shaked */
 154 #define HAVE_DISK_STORAGE
 155
 156 /* Define this for LCD backlight available */
 157 #define HAVE_BACKLIGHT
 158
 159 #define HAVE_BACKLIGHT_BRIGHTNESS
 160
 161 #define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_SW_SETTING
 162
 163 /* Main LCD backlight brightness range and defaults */
 164 #define MIN_BRIGHTNESS_SETTING          0
 165 #define MAX_BRIGHTNESS_SETTING          127
 166 #define DEFAULT_BRIGHTNESS_SETTING      85 /* OF "full brightness" */
 167 #define DEFAULT_DIMNESS_SETTING         22 /* OF "most dim" */
 168
 169 /* Define this if you have a software controlled poweroff */
 170 #define HAVE_SW_POWEROFF
 171
 172 /* The number of bytes reserved for loadable codecs */
 173 #define CODEC_SIZE 0x100000
 174
 175 /* The number of bytes reserved for loadable plugins */
 176 #if LCD_NATIVE_WIDTH < 480
 177 #define PLUGIN_BUFFER_SIZE 0x100000
 178 #else
 179 /* THe larger screen needs larger bitmaps in plugins */
 180 #define PLUGIN_BUFFER_SIZE 0x200000
 181 #endif
 182
 183 #define HW_SAMPR_CAPS SAMPR_CAP_44 | SAMPR_CAP_22 | SAMPR_CAP_11 | SAMPR_CAP_8
 184
 185 #define BATTERY_CAPACITY_DEFAULT 1500 /* default battery capacity */
 186 #define BATTERY_CAPACITY_MIN 1000        /* min. capacity selectable */
 187 #define BATTERY_CAPACITY_MAX 2000        /* max. capacity selectable */
 188 #define BATTERY_CAPACITY_INC 100         /* capacity increment */
 189 #define BATTERY_TYPES_COUNT  1          /* only one type */
 190
 191 /* define current usage levels */
 192 #define CURRENT_NORMAL     100 /* Measured */
 193 #define CURRENT_BACKLIGHT  100 /* Over 200 mA total measured when on */
 194 #define CURRENT_RECORD     0  /* no recording */
 195
 196 /* Hardware controlled charging with monitoring */
 197 #define CONFIG_CHARGING CHARGING_MONITOR
 198
 199 /* Define this if you have a Texas Instruments TSC2100 touch screen */
 200 #define HAVE_TSC2100
 201
 202 /* M66591 register base */
 203 #define M66591_BASE 0x60000000
 204
 205 /* enable these for the usb stack */
 206 #define CONFIG_USBOTG       USBOTG_M66591
 207 #define USE_ROCKBOX_USB
 208
 209 #define HAVE_USBSTACK
 210 //#define HAVE_USB_POWER
 211 //#define USBPOWER_BUTTON     BUTTON_POWER
 212 //#define USBPOWER_BTN_IGNORE BUTTON_TOUCH
 213 /* usb stack and driver settings */
 214 #define USB_NUM_ENDPOINTS   7
 215 #define USB_VENDOR_ID       0x07b4
 216 #define USB_PRODUCT_ID      0x0281
 217 #define HAVE_USB_HID_MOUSE
 218
 219 /* Define this if hardware supports alternate blitting */
 220 #define HAVE_LCD_MODES LCD_MODE_RGB565 | LCD_MODE_YUV | LCD_MODE_PAL256
 221
 222 #define CONFIG_CPU DM320
 223
 224 #define CONFIG_I2C I2C_DM320
 225
 226 /* define this if the hardware can be powered off while charging */
 227 #define HAVE_POWEROFF_WHILE_CHARGING
 228
 229 /* The size of the flash ROM */
 230 #define FLASH_SIZE 0x400000
 231
 232 /* Define this to the CPU frequency */
 233 #define CPU_FREQ 87500000
 234
 235 /* Define this if you have ATA power-off control */
 236 #define HAVE_ATA_POWER_OFF
 237
 238 /* Offset ( in the firmware file's header ) to the file CRC */
 239 #define FIRMWARE_OFFSET_FILE_CRC 0
 240
 241 /* Offset ( in the firmware file's header ) to the real data */
 242 #define FIRMWARE_OFFSET_FILE_DATA 8
 243
 244 /* Define this if you have adjustable CPU frequency */
 245 #define HAVE_ADJUSTABLE_CPU_FREQ
 246
 247 #define BOOTFILE_EXT "mrobe500"
 248 #define BOOTFILE "rockbox." BOOTFILE_EXT
 249 #define BOOTDIR "/.rockbox"
 250
 251 #define IRAM_LCDFRAMEBUFFER IBSS_ATTR /* put the lcd frame buffer in IRAM */
 252