firmware/export/config-h300.h

   1 #define TARGET_TREE /* this target is using the target tree system */
   2 /*
   3  * This config file is for iriver H320, H340
   4  */
   5 #define IRIVER_H300_SERIES 1
   6
   7 #define MODEL_NAME "iriver H300 series"
   8
   9 /* For Rolo and boot loader */
  10 #define MODEL_NUMBER 2
  11
  12 /* define this if you use an ATA controller */
  13 #define CONFIG_STORAGE STORAGE_ATA
  14
  15 /* define this if you have a bitmap LCD display */
  16 #define HAVE_LCD_BITMAP
  17
  18 /* define this if you have a colour LCD */
  19 #define HAVE_LCD_COLOR
  20
  21 /* define this if you want album art for this target */
  22 #define HAVE_ALBUMART
  23
  24 /* define this to enable bitmap scaling */
  25 #define HAVE_BMP_SCALING
  26
  27 /* define this to enable JPEG decoding */
  28 #define HAVE_JPEG
  29
  30 /* define this if you can flip your LCD */
  31 #define HAVE_LCD_FLIP
  32
  33 /* define this if you have access to the quickscreen */
  34 #define HAVE_QUICKSCREEN
  35 /* define this if you have access to the pitchscreen */
  36 #define HAVE_PITCHSCREEN
  37
  38 /* define this if you would like tagcache to build on this target */
  39 #define HAVE_TAGCACHE
  40
  41 /* LCD dimensions */
  42 #define LCD_WIDTH  220
  43 #define LCD_HEIGHT 176
  44 #define LCD_DEPTH  16   /* 65k colours */
  45 #define LCD_PIXELFORMAT RGB565 /* rgb565 */
  46
  47 /* remote LCD */
  48 #define LCD_REMOTE_WIDTH  128
  49 #define LCD_REMOTE_HEIGHT 64
  50 #define LCD_REMOTE_DEPTH  1
  51
  52 #define LCD_REMOTE_PIXELFORMAT VERTICAL_PACKING
  53
  54 /* Remote display colours, for screenshots and sim (0xRRGGBB) */
  55 #define LCD_REMOTE_DARKCOLOR       0x000000
  56 #define LCD_REMOTE_BRIGHTCOLOR     0x5a915a
  57 #define LCD_REMOTE_BL_DARKCOLOR    0x000000
  58 #define LCD_REMOTE_BL_BRIGHTCOLOR  0x82b4fa
  59
  60 #define CONFIG_KEYPAD IRIVER_H300_PAD
  61
  62 #define CONFIG_REMOTE_KEYPAD H300_REMOTE
  63
  64 /* Define this if you do software codec */
  65 #define CONFIG_CODEC SWCODEC
  66
  67 /* define this if you have a real-time clock */
  68 #define CONFIG_RTC RTC_PCF50606
  69
  70 /* define this if you have a disk storage, i.e. something
  71    that needs spinups and can cause skips when shaked */
  72 #define HAVE_DISK_STORAGE
  73
  74 /* Define this if you have an remote lcd */
  75 #define HAVE_REMOTE_LCD
  76
  77 /* Define if we have a hardware defect that causes ticking on the audio line */
  78 #define HAVE_REMOTE_LCD_TICKING
  79
  80 /* Define this for LCD backlight available */
  81 #define HAVE_BACKLIGHT
  82 #define HAVE_BACKLIGHT_BRIGHTNESS
  83 /* Which backlight fading type? */
  84 #define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_SW_HW_REG
  85 /* Define this if your LCD can be enabled/disabled */
  86 #define HAVE_LCD_ENABLE
  87
  88 /* Define this if you have a software controlled poweroff */
  89 #define HAVE_SW_POWEROFF
  90
  91 /* The number of bytes reserved for loadable codecs */
  92 #define CODEC_SIZE 0x100000
  93
  94 /* The number of bytes reserved for loadable plugins */
  95 #define PLUGIN_BUFFER_SIZE 0x80000
  96
  97 #define AB_REPEAT_ENABLE 1
  98
  99 #define CONFIG_TUNER TEA5767
 100 #define CONFIG_TUNER_XTAL 32768
 101
 102 #define HAVE_UDA1380
 103
 104 /* define this if you have recording possibility */
 105 #define HAVE_RECORDING
 106
 107 /* Define bitmask of input sources - recordable bitmask can be defined
 108    explicitly if different */
 109 #define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_LINEIN | SRC_CAP_FMRADIO)
 110
 111 /* define hardware samples rate caps mask */
 112 #define HW_SAMPR_CAPS   (SAMPR_CAP_88 | SAMPR_CAP_44 | SAMPR_CAP_22 | SAMPR_CAP_11)
 113
 114 /* define the bitmask of recording sample rates */
 115 #define REC_SAMPR_CAPS  (SAMPR_CAP_44 | SAMPR_CAP_22 | SAMPR_CAP_11)
 116
 117 #define HAVE_AGC
 118
 119 #define BATTERY_CAPACITY_DEFAULT 1300 /* default battery capacity */
 120 #define BATTERY_CAPACITY_MIN 1300 /* min. capacity selectable */
 121 #define BATTERY_CAPACITY_MAX 3200 /* max. capacity selectable */
 122 #define BATTERY_CAPACITY_INC 50   /* capacity increment */
 123 #define BATTERY_TYPES_COUNT  1    /* only one type */
 124
 125 /* Hardware controlled charging with monitoring */
 126 #define CONFIG_CHARGING CHARGING_MONITOR
 127
 128 /* define this if the unit can be powered or charged via USB */
 129 #define HAVE_USB_POWER
 130
 131 /* define current usage levels */
 132 #define CURRENT_NORMAL     80  /* 16h playback on 1300mAh battery from IriverRuntime wiki page */
 133 #define CURRENT_BACKLIGHT  23  /* FIXME: This needs to be measured, copied from H100 */
 134 #define CURRENT_RECORD    110  /* additional current while recording */
 135 #define CURRENT_MAX_CHG   650  /* maximum charging current */
 136 #define CURRENT_REMOTE      8  /* additional current when remote connected */
 137
 138 /* define this if the unit can have USB charging disabled by user -
 139  * if USB/MAIN power is discernable and hardware doesn't compel charging */
 140 #define HAVE_USB_CHARGING_ENABLE
 141
 142 /* Define this if you have a Motorola SCF5249 */
 143 #define CONFIG_CPU MCF5249
 144
 145 /* Define this if you want to use coldfire's i2c interface */
 146 #define CONFIG_I2C I2C_COLDFIRE
 147
 148 /* The size of the flash ROM */
 149 #define FLASH_SIZE 0x400000
 150
 151 /* Define this to the CPU frequency */
 152 #define CPU_FREQ      11289600
 153
 154 /* Define this if you have ATA power-off control */
 155 #define HAVE_ATA_POWER_OFF
 156
 157 #define CONFIG_LCD LCD_H300
 158
 159 /* Offset ( in the firmware file's header ) to the file CRC */
 160 #define FIRMWARE_OFFSET_FILE_CRC 0
 161
 162 /* Offset ( in the firmware file's header ) to the real data */
 163 #define FIRMWARE_OFFSET_FILE_DATA 8
 164
 165 /* USB On-the-go */
 166 #define CONFIG_USBOTG USBOTG_ISP1362
 167
 168 /* Define this if you have adjustable CPU frequency */
 169 #define HAVE_ADJUSTABLE_CPU_FREQ
 170
 171 #define BOOTFILE_EXT "iriver"
 172 #define BOOTFILE "rockbox." BOOTFILE_EXT
 173 #define BOOTDIR "/.rockbox"
 174
 175 #define BOOTLOADER_ENTRYPOINT  0x001F0000
 176 #define FLASH_ENTRYPOINT       0x00001000
 177 #define FLASH_MAGIC            0xfbfbfbf1
 178
 179 /* Define this if there is an EEPROM chip */
 180 #define HAVE_EEPROM
 181
 182 /* Define this for FM radio input available */
 183 #define HAVE_FMRADIO_IN
 184
 185 /** Port-specific settings **/
 186
 187 /* Main LCD contrast range and defaults */
 188 #define MIN_CONTRAST_SETTING        5
 189 #define MAX_CONTRAST_SETTING        63
 190 #define DEFAULT_CONTRAST_SETTING    40
 191
 192 /* Main LCD backlight brightness range and defaults */
 193 /* accepts 0..15 but note that 0 and 1 give a black display on H300! */
 194 #define MIN_BRIGHTNESS_SETTING      2  /*  2/16 (12.50%) */
 195 #define MAX_BRIGHTNESS_SETTING      15 /* 15/16 (93.75%) */
 196 #define DEFAULT_BRIGHTNESS_SETTING  9  /*  9/16 (56.25%) */
 197
 198 /* Remote LCD contrast range and defaults */
 199 #define MIN_REMOTE_CONTRAST_SETTING     5
 200 #define MAX_REMOTE_CONTRAST_SETTING     63
 201 #define DEFAULT_REMOTE_CONTRAST_SETTING 42