firmware/export/config/gigabeats.h

   1 /*
   2  * This config file is for toshiba Gigabeat S
   3  */
   4
   5 #define TARGET_TREE /* this target is using the target tree system */
   6
   7 #define TOSHIBA_GIGABEAT_S 1
   8
   9 #define MODEL_NAME "Toshiba Gigabeat S"
  10
  11 /* For Rolo and boot loader */
  12 #define MODEL_NUMBER 21
  13
  14 /* define this if you use an ATA controller */
  15 #define CONFIG_STORAGE STORAGE_ATA
  16
  17 /* define this if you have a bitmap LCD display */
  18 #define HAVE_LCD_BITMAP
  19
  20 /* define this if you have a colour LCD */
  21 #define HAVE_LCD_COLOR
  22
  23 /* define this if you want album art for this target */
  24 #define HAVE_ALBUMART
  25
  26 /* define this to enable bitmap scaling */
  27 #define HAVE_BMP_SCALING
  28
  29 /* define this to enable JPEG decoding */
  30 #define HAVE_JPEG
  31
  32 /* define this if you have access to the quickscreen */
  33 #define HAVE_QUICKSCREEN
  34
  35 /* define this if you have access to the pitchscreen */
  36 #define HAVE_PITCHSCREEN
  37
  38 /* define this if you would like tagcache to build on this target */
  39 #define HAVE_TAGCACHE
  40
  41 /* define this if the target has volume keys which can be used in the lists */
  42 #define HAVE_VOLUME_IN_LIST
  43
  44 /* LCD dimensions */
  45 #define LCD_WIDTH  240
  46 #define LCD_HEIGHT 320
  47 #define LCD_DEPTH  16   /* 65k colours */
  48 #define LCD_PIXELFORMAT RGB565 /* rgb565 */
  49
  50 #define CONFIG_KEYPAD GIGABEAT_S_PAD
  51
  52 /* Define this to enable morse code input */
  53 #define HAVE_MORSE_INPUT
  54
  55 /* Define this if you do software codec */
  56 #define CONFIG_CODEC SWCODEC
  57
  58 /* define this if you have a real-time clock */
  59 #define CONFIG_RTC RTC_MC13783
  60
  61 /* Define if the device can wake from an RTC alarm */
  62 #define HAVE_RTC_ALARM
  63
  64 /* Define this for LCD backlight available */
  65 #define HAVE_BACKLIGHT
  66
  67 /* define this if you have a disk storage, i.e. something
  68    that needs spinups and can cause skips when shaked */
  69 #define HAVE_DISK_STORAGE
  70
  71 /* Define this if you have a software controlled poweroff */
  72 #define HAVE_SW_POWEROFF
  73
  74 /* The number of bytes reserved for loadable codecs */
  75 #define CODEC_SIZE 0x100000
  76
  77 /* The number of bytes reserved for loadable plugins */
  78 #define PLUGIN_BUFFER_SIZE 0x80000
  79
  80 /* Define this if you have a SI4700 fm radio tuner */
  81 #define CONFIG_TUNER SI4700
  82
  83 /* Define this if you have the WM8978 audio codec */
  84 #define HAVE_WM8978
  85
  86 /* Define bitmask of input sources - recordable bitmask can be defined
  87    explicitly if different */
  88 #define INPUT_SRC_CAPS SRC_CAP_FMRADIO
  89
  90 /* define the bitmask of hardware sample rates */
  91 #define HW_SAMPR_CAPS (SAMPR_CAP_48 | SAMPR_CAP_44 | SAMPR_CAP_32 | \
  92                        SAMPR_CAP_24 | SAMPR_CAP_22 | SAMPR_CAP_16 | \
  93                        SAMPR_CAP_12 | SAMPR_CAP_11 | SAMPR_CAP_8)
  94
  95 /* define the bitmask of recording sample rates */
  96 #define REC_SAMPR_CAPS HW_SAMPR_CAPS /* Same as playback */
  97
  98 /* define default recording levels */
  99 #define DEFAULT_REC_LEFT_GAIN 0
 100 #define DEFAULT_REC_RIGHT_GAIN 0
 101
 102 /* Define this if you have recording capability */
 103 #define HAVE_RECORDING
 104
 105 /* Define this if your LCD can be put to sleep. */
 106 #define HAVE_LCD_SLEEP
 107 /* We don't use a setting but a fixed delay after the backlight has
 108  * turned off */
 109 #define LCD_SLEEP_TIMEOUT (2*HZ)
 110
 111 /* Define this if your LCD can be enabled/disabled */
 112 #define HAVE_LCD_ENABLE
 113
 114 #ifndef BOOTLOADER
 115
 116 #define HAVE_BACKLIGHT_BRIGHTNESS
 117
 118 /* Main LCD backlight brightness range and defaults */
 119 #define MIN_BRIGHTNESS_SETTING          1
 120 #define MAX_BRIGHTNESS_SETTING          24
 121 #define DEFAULT_BRIGHTNESS_SETTING      12
 122
 123 /* Implementation-defined fading type with bool settings */
 124 #define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_TARGET
 125
 126 #define HAVE_HEADPHONE_DETECTION
 127 #endif /* BOOTLOADER */
 128
 129 #define CONFIG_CPU IMX31L
 130
 131 /* Define this if you want to use imx31l's i2c interface */
 132 #define CONFIG_I2C I2C_IMX31L
 133
 134 /* Define the bitmask of modules used */
 135 #define SPI_MODULE_MASK (USE_CSPI2_MODULE)
 136 #define I2C_MODULE_MASK (USE_I2C1_MODULE | USE_I2C2_MODULE)
 137 #define GPIO_EVENT_MASK (USE_GPIO1_EVENTS)
 138
 139 /* Define this if target has an additional number of threads specific to it */
 140 #define TARGET_EXTRA_THREADS 2
 141
 142 /* Type of mobile power - check this out */
 143 #define BATTERY_CAPACITY_DEFAULT 700 /* default battery capacity */
 144 #define BATTERY_CAPACITY_MIN     700 /* min. capacity selectable */
 145 #define BATTERY_CAPACITY_MAX    1200 /* max. capacity selectable */
 146 #define BATTERY_CAPACITY_INC      25 /* capacity increment */
 147 #define BATTERY_TYPES_COUNT        1 /* only one type */
 148
 149 /* TODO: have a proper status displayed in the bootloader and have it
 150  * work! */
 151 /* Charing implemented in a target-specific algorithm */
 152 #define CONFIG_CHARGING CHARGING_TARGET
 153
 154 /* define this if the hardware can be powered off while charging */
 155 #define HAVE_POWEROFF_WHILE_CHARGING
 156
 157 /* The size of the flash ROM */
 158 #define FLASH_SIZE 0x200000
 159
 160 /* Define this to the CPU frequency */
 161 /* TODO */
 162 #define CPU_FREQ 264000000 /* Set by retailOS loader */
 163
 164 /* define this if the unit can be powered or charged via USB */
 165 #define HAVE_USB_POWER
 166 #define USBPOWER_BUTTON     BUTTON_MENU
 167 #define USBPOWER_BTN_IGNORE BUTTON_POWER
 168
 169 /* define this if the unit has a battery switch or battery can be removed
 170  * when running */
 171 #define HAVE_BATTERY_SWITCH
 172
 173 /* USB On-the-go */
 174 #define CONFIG_USBOTG USBOTG_ARC
 175
 176 /* enable these for the usb stack */
 177 #define USE_ROCKBOX_USB
 178 #define HAVE_USBSTACK
 179 /* usb stack and driver settings */
 180 #define USB_PORTSCX_PHY_TYPE PORTSCX_PTS_ULPI
 181 #define USB_VENDOR_ID 0x0930
 182 #define USB_PRODUCT_ID 0x0010
 183 #define HAVE_USB_HID_MOUSE
 184
 185 /* Define this if you have ATA power-off control */
 186 #define HAVE_ATA_POWER_OFF
 187
 188 /* Define this to add support for ATA DMA */
 189 #define HAVE_ATA_DMA
 190
 191 #define CONFIG_LCD LCD_GIGABEAT
 192
 193 /* Offset ( in the firmware file's header ) to the file CRC */
 194 #define FIRMWARE_OFFSET_FILE_CRC 0
 195
 196 /* Offset ( in the firmware file's header ) to the real data */
 197 #define FIRMWARE_OFFSET_FILE_DATA 8
 198
 199 //#define HAVE_SERIAL
 200 #define HAVE_VOLUME_IN_LIST
 201
 202 /*Remove Comments from UART_INT to enable the UART interrupts,*/
 203 /*otherwise iterrupts will be disabled. For now we will test */
 204 /*UART state by polling the registers, and if necessary update this */
 205 /*method by using the interrupts instead*/
 206 //#define UART_INT
 207
 208 /* Define this if you have adjustable CPU frequency */
 209 /* #define HAVE_ADJUSTABLE_CPU_FREQ */
 210
 211 #define HAVE_PCM_DMA_ADDRESS
 212
 213 #define BOOTFILE_EXT "gigabeat"
 214 #define BOOTFILE "rockbox." BOOTFILE_EXT
 215 #define BOOTDIR "/.rockbox"
 216
 217 /* Define this if a programmable hotkey is mapped */
 218 #define HAVE_HOTKEY