firmware/export/config/logikdax.h

   1 /*
   2  * This config file is for the Logik DAX MP3/DAB
   3  */
   4 #define TARGET_TREE /* this target is using the target tree system */
   5
   6 /* For Rolo and boot loader */
   7 #define MODEL_NUMBER 33
   8
   9 #define MODEL_NAME   "Logik DAX MP3/DAB"
  10
  11 /* define this if you have recording possibility */
  12 //#define HAVE_RECORDING
  13
  14 /* Define bitmask of input sources - recordable bitmask can be defined
  15    explicitly if different */
  16 //#define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_LINEIN | SRC_CAP_SPDIF)
  17
  18 #if 0 /* Enable for USB driver test */
  19 #define HAVE_USBSTACK
  20 #define USB_VENDOR_ID 0x13d1
  21 #define USB_PRODUCT_ID 0x1002
  22 #endif
  23
  24
  25 /* define this if you have a bitmap LCD display */
  26 #define HAVE_LCD_BITMAP
  27
  28 /* define this if you can flip your LCD */
  29 #define HAVE_LCD_FLIP
  30
  31 /* define this if you can invert the colours on your LCD */
  32 #define HAVE_LCD_INVERT
  33
  34 /* define this if you have access to the quickscreen */
  35 #define HAVE_QUICKSCREEN
  36 /* define this if you have access to the pitchscreen */
  37 #define HAVE_PITCHSCREEN
  38
  39 /* define this if you would like tagcache to build on this target */
  40 #define HAVE_TAGCACHE
  41
  42 #define HAVE_FAT16SUPPORT
  43
  44 /* define this if you have a flash memory storage */
  45 #define HAVE_FLASH_STORAGE
  46
  47 #define CONFIG_STORAGE STORAGE_NAND
  48
  49 #define CONFIG_NAND NAND_TCC
  50
  51 /* LCD dimensions */
  52 #define LCD_WIDTH  128
  53 #define LCD_HEIGHT 64
  54 #define LCD_DEPTH  1
  55
  56 #define LCD_PIXELFORMAT VERTICAL_PACKING
  57
  58 /* Display colours, for screenshots and sim (0xRRGGBB) */
  59 #define LCD_DARKCOLOR       0x000000
  60 #define LCD_BRIGHTCOLOR     0x5a915a
  61 #define LCD_BL_DARKCOLOR    0x000000
  62 #define LCD_BL_BRIGHTCOLOR  0x82b4fa
  63
  64 /* define this to indicate your device's keypad */
  65 #define CONFIG_KEYPAD LOGIK_DAX_PAD
  66
  67 /* define this if you have a real-time clock */
  68 #define CONFIG_RTC RTC_TCC77X
  69
  70 /* define this if you have RTC RAM available for settings */
  71 //#define HAVE_RTC_RAM
  72
  73 /* Define this if you have a software controlled poweroff */
  74 #define HAVE_SW_POWEROFF
  75
  76 /* The number of bytes reserved for loadable codecs */
  77 #define CODEC_SIZE 0x38000
  78
  79 /* The number of bytes reserved for loadable plugins */
  80 #define PLUGIN_BUFFER_SIZE 0x10000
  81
  82 #define AB_REPEAT_ENABLE 1
  83
  84 /* Define this if you do software codec */
  85 #define CONFIG_CODEC SWCODEC
  86
  87 /* The DAX uses built-in WM8731 codec */
  88 #define HAVE_WM8731
  89 /* Codec is slave on serial bus */
  90 #define CODEC_SLAVE
  91
  92 /* Define this for LCD backlight available */
  93 #define HAVE_BACKLIGHT
  94
  95 #define CONFIG_I2C I2C_TCC77X
  96
  97 #define BATTERY_CAPACITY_DEFAULT 1500 /* default battery capacity */
  98 #define BATTERY_CAPACITY_MIN 1500 /* min. capacity selectable */
  99 #define BATTERY_CAPACITY_MAX 3200 /* max. capacity selectable */
 100 #define BATTERY_CAPACITY_INC 50   /* capacity increment */
 101 #define BATTERY_TYPES_COUNT  1    /* only one type */
 102
 103 /* define this if the unit should not shut down on low battery. */
 104 #define NO_LOW_BATTERY_SHUTDOWN
 105
 106 /* Define this if you have a TCC773L */
 107 #define CONFIG_CPU TCC773L
 108
 109 /* Define this if you have ATA power-off control */
 110 #define HAVE_ATA_POWER_OFF
 111
 112 #define HAVE_FAT16SUPPORT
 113
 114 /* Define this to the CPU frequency */
 115 #define CPU_FREQ      120000000
 116
 117 /* Offset ( in the firmware file's header ) to the file length */
 118 #define FIRMWARE_OFFSET_FILE_LENGTH 0
 119
 120 /* Offset ( in the firmware file's header ) to the file CRC */
 121 #define FIRMWARE_OFFSET_FILE_CRC 4
 122
 123 /* Offset ( in the firmware file's header ) to the real data */
 124 #define FIRMWARE_OFFSET_FILE_DATA 6
 125
 126 /* The start address index for ROM builds */
 127 /* #define ROM_START 0x11010 for behind original Archos */
 128 #define ROM_START 0x7010 /* for behind BootBox */
 129
 130 #define CONFIG_LCD LCD_SSD1815
 131
 132 #define BOOTFILE_EXT "logik"
 133 #define BOOTFILE "rockbox." BOOTFILE_EXT
 134 #define BOOTDIR "/"
 135
 136 #define IBSS_ATTR_VOICE_STACK
 137 #define ICODE_ATTR_TREMOR_NOT_MDCT
 138 #define ICODE_ATTR_TREMOR_MDCT
 139 #define ICODE_ATTR_FLAC
 140 #define IBSS_ATTR_FLAC_DECODED0
 141 #define ICONST_ATTR_MPA_HUFFMAN
 142 #define IBSS_ATTR_MPC_SAMPLE_BUF
 143 #define ICODE_ATTR_ALAC
 144 #define IBSS_ATTR_SHORTEN_DECODED0
 145
 146 #define IRAM_LCDFRAMEBUFFER IBSS_ATTR /* put the lcd frame buffer in IRAM */
 147
 148 /* Define this if a programmable hotkey is mapped */
 149 //#define HAVE_HOTKEY