firmware/export/config/ipodvideo.h

   1 /*
   2  * This config file is for the Apple iPod Video
   3  */
   4 #define TARGET_TREE /* this target is using the target tree system */
   5
   6 #define IPOD_ARCH 1
   7
   8 #define MODEL_NAME   "Apple iPod Video"
   9
  10 /* For Rolo and boot loader */
  11 #define MODEL_NUMBER 5
  12
  13 /* define this if you use an ATA controller */
  14 #define CONFIG_STORAGE STORAGE_ATA
  15
  16 /* define this if the ATA controller and method of USB access support LBA48 */
  17 #define HAVE_LBA48
  18
  19 /* define this if you have recording possibility */
  20 #define HAVE_RECORDING
  21
  22 /* Define bitmask of input sources - recordable bitmask can be defined
  23    explicitly if different */
  24 #define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_LINEIN | SRC_CAP_FMRADIO)
  25
  26 /* define the bitmask of hardware sample rates */
  27 #define HW_SAMPR_CAPS   (SAMPR_CAP_48 | SAMPR_CAP_44 | SAMPR_CAP_32 | \
  28                          SAMPR_CAP_24 | SAMPR_CAP_22 | SAMPR_CAP_16 | \
  29                          SAMPR_CAP_12 | SAMPR_CAP_11 | SAMPR_CAP_8)
  30
  31 /* define the bitmask of recording sample rates */
  32 #define REC_SAMPR_CAPS  HW_SAMPR_CAPS
  33
  34 /* define this if you have a bitmap LCD display */
  35 #define HAVE_LCD_BITMAP
  36
  37 /* define this if you have a colour LCD */
  38 #define HAVE_LCD_COLOR
  39
  40 /* define this if you want album art for this target */
  41 #define HAVE_ALBUMART
  42
  43 /* define this to enable bitmap scaling */
  44 #define HAVE_BMP_SCALING
  45
  46 /* define this to enable JPEG decoding */
  47 #define HAVE_JPEG
  48
  49 /* define this if you have access to the quickscreen */
  50 #define HAVE_QUICKSCREEN
  51 /* define this if you have access to the pitchscreen */
  52 #define HAVE_PITCHSCREEN
  53
  54 /* define this if you would like tagcache to build on this target */
  55 #define HAVE_TAGCACHE
  56
  57 /* LCD dimensions */
  58 #define LCD_WIDTH  320
  59 #define LCD_HEIGHT 240
  60 #define LCD_DEPTH  16   /* 65536 colours */
  61 #define LCD_PIXELFORMAT RGB565 /* rgb565 */
  62
  63 /* LCD stays visible without backlight - simulator hint */
  64 #define HAVE_TRANSFLECTIVE_LCD
  65
  66 #define CONFIG_KEYPAD IPOD_4G_PAD
  67
  68 /* Define this to enable morse code input */
  69 #define HAVE_MORSE_INPUT
  70
  71 /* Define this if you do software codec */
  72 #define CONFIG_CODEC SWCODEC
  73
  74 /* define this if you have a real-time clock */
  75 #define CONFIG_RTC RTC_PCF50605
  76
  77 /* Define if the device can wake from an RTC alarm */
  78 #define HAVE_RTC_ALARM
  79
  80 /* Define this if you can switch on/off the accessory power supply */
  81 #define HAVE_ACCESSORY_SUPPLY
  82
  83 /* Define this, if you can switch on/off the lineout */
  84 #define HAVE_LINEOUT_POWEROFF
  85
  86 /* Define this if you have a software controlled poweroff */
  87 #define HAVE_SW_POWEROFF
  88
  89 /* The number of bytes reserved for loadable codecs */
  90 #define CODEC_SIZE 0x100000
  91
  92 /* The number of bytes reserved for loadable plugins */
  93 #define PLUGIN_BUFFER_SIZE 0x80000
  94
  95 /* Define this if you have the WM8758 audio codec */
  96 #define HAVE_WM8758
  97
  98 #define AB_REPEAT_ENABLE 1
  99 #define ACTION_WPSAB_SINGLE ACTION_WPS_BROWSE
 100
 101 /* define this if you have a disk storage, i.e. something
 102    that needs spinups and can cause skips when shaked */
 103 #define HAVE_DISK_STORAGE
 104
 105 /* Define this for LCD backlight available */
 106 #define HAVE_BACKLIGHT
 107 #define HAVE_BACKLIGHT_BRIGHTNESS
 108
 109 #ifndef BOOTLOADER
 110 /* Support for LCD sleep/BCM shutdown */
 111 #define HAVE_LCD_SLEEP
 112 #define HAVE_LCD_SLEEP_SETTING
 113 /* The same code may also be used when shutting down the iPod */
 114 #define HAVE_LCD_SHUTDOWN
 115 #endif
 116
 117 /* We can fade the backlight by using PWM */
 118 #define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_PWM
 119
 120 /* Main LCD backlight brightness range and defaults */
 121 #define MIN_BRIGHTNESS_SETTING      1
 122 #define MAX_BRIGHTNESS_SETTING      32
 123 #define DEFAULT_BRIGHTNESS_SETTING  16
 124
 125
 126 /* define this if the unit uses a scrollwheel for navigation */
 127 #define HAVE_SCROLLWHEEL
 128 /* define to activate advanced wheel acceleration code */
 129 #define HAVE_WHEEL_ACCELERATION
 130 /* define from which rotation speed [degree/sec] on the acceleration starts */
 131 #define WHEEL_ACCEL_START 270
 132 /* define type of acceleration (1 = ^2, 2 = ^3, 3 = ^4) */
 133 #define WHEEL_ACCELERATION 3
 134
 135 /* Define this if you can detect headphones */
 136 #define HAVE_HEADPHONE_DETECTION
 137
 138 /* Type of mobile power */
 139 #if (MEM==32)  /* this is the 30GB-model */
 140 # define BATTERY_CAPACITY_DEFAULT 400 /* default battery capacity for the 30GB model */
 141 # define BATTERY_CAPACITY_MIN     300 /* min. capacity selectable */
 142 # define BATTERY_CAPACITY_MAX    1000 /* max. capacity selectable */
 143 #else          /* these are the 60/80GB-models */
 144 # define BATTERY_CAPACITY_DEFAULT 600 /* default battery capacity for the 60/80GB model */
 145 # define BATTERY_CAPACITY_MIN     500 /* min. capacity selectable */
 146 # define BATTERY_CAPACITY_MAX    1400 /* max. capacity selectable */
 147 #endif
 148 #define BATTERY_CAPACITY_INC       50 /* capacity increment */
 149 #define BATTERY_TYPES_COUNT         1 /* only one type */
 150
 151 /* Hardware controlled charging with monitoring */
 152 #define CONFIG_CHARGING CHARGING_MONITOR
 153
 154 /* define this if the unit can be powered or charged via USB */
 155 #define HAVE_USB_POWER
 156
 157 /* define current usage levels */
 158 #define CURRENT_NORMAL     24  /* 30MHz clock, LCD off, accessory supply on */
 159 #define CURRENT_BACKLIGHT  20  /* FIXME: this needs adjusting */
 160 #if defined(HAVE_RECORDING)
 161 #define CURRENT_RECORD     35  /* FIXME: this needs adjusting */
 162 #endif
 163
 164 /* Define Apple remote tuner */
 165 #define CONFIG_TUNER IPOD_REMOTE_TUNER
 166 #define HAVE_RDS_CAP
 167
 168 /* Define this if you have a PortalPlayer PP5022 */
 169 #define CONFIG_CPU PP5022
 170
 171 /* Define this if you want to use the PP5020 i2c interface */
 172 #define CONFIG_I2C I2C_PP5020
 173
 174 /* We're able to shut off power to the HDD */
 175 #define HAVE_ATA_POWER_OFF
 176
 177 /* define this if the hardware can be powered off while charging */
 178 //#define HAVE_POWEROFF_WHILE_CHARGING
 179
 180 /* The start address index for ROM builds */
 181 #define ROM_START 0x00000000
 182
 183 /* The size of the flash ROM */
 184 #define FLASH_SIZE 0x100000
 185
 186 /* Define this to the CPU frequency */
 187 #define CPU_FREQ      11289600
 188
 189 #define CONFIG_LCD LCD_IPODVIDEO
 190
 191 /* Offset ( in the firmware file's header ) to the file length */
 192 #define FIRMWARE_OFFSET_FILE_LENGTH 0
 193
 194 /* Offset ( in the firmware file's header ) to the file CRC */
 195 #define FIRMWARE_OFFSET_FILE_CRC 0
 196
 197 /* Offset ( in the firmware file's header ) to the real data */
 198 #define FIRMWARE_OFFSET_FILE_DATA 8
 199
 200 /* USB On-the-go */
 201 #define CONFIG_USBOTG USBOTG_ARC
 202
 203 /* enable these for the experimental usb stack */
 204 #define HAVE_USBSTACK
 205 #define USE_ROCKBOX_USB
 206 #define USB_VENDOR_ID 0x05ac
 207 #define USB_PRODUCT_ID 0x1209
 208 #define HAVE_USB_HID_MOUSE
 209
 210 /* Define this if you have adjustable CPU frequency */
 211 #define HAVE_ADJUSTABLE_CPU_FREQ
 212
 213 /* Define this if you can read an absolute wheel position */
 214 #define HAVE_WHEEL_POSITION
 215
 216 /* define this if the device has larger sectors when accessed via USB */
 217 /* (only relevant in disk.c, fat.c now always supports large virtual sectors) */
 218 #define MAX_LOG_SECTOR_SIZE 2048
 219
 220 /* define this if the hard drive uses large physical sectors (ATA-7 feature) */
 221 /* and doesn't handle them in the drive firmware */
 222 #define MAX_PHYS_SECTOR_SIZE 1024
 223
 224 #define BOOTFILE_EXT "ipod"
 225 #define BOOTFILE "rockbox." BOOTFILE_EXT
 226 #define BOOTDIR "/.rockbox"
 227
 228 #define ICODE_ATTR_TREMOR_NOT_MDCT
 229
 230 #define IPOD_ACCESSORY_PROTOCOL
 231 #define HAVE_SERIAL
 232
 233 /* DMA is used only for reading on PP502x because although reads are ~8x faster
 234  * writes appear to be ~25% slower.
 235  */
 236 #define HAVE_ATA_DMA
 237
 238 /* Define this if a programmable hotkey is mapped */
 239 #define HAVE_HOTKEY