firmware/target/arm/rk27xx/system-rk27xx.c

   1 /***************************************************************************
   2  *             __________               __   ___.
   3  *   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
   4  *   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
   5  *   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
   6  *   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
   7  *                     \/            \/     \/    \/            \/
   8  * $Id$
   9  *
  10  * Copyright (C) 2011 by Marcin Bukat
  11  *
  12  * This program is free software; you can redistribute it and/or
  13  * modify it under the terms of the GNU General Public License
  14  * as published by the Free Software Foundation; either version 2
  15  * of the License, or (at your option) any later version.
  16  *
  17  * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
  18  * KIND, either express or implied.
  19  *
  20  ****************************************************************************/
  21
  22 #include "kernel.h"
  23 #include "system.h"
  24 #include "panic.h"
  25 #include "system-target.h"
  26
  27 #define default_interrupt(name) \
  28   extern __attribute__((weak,alias("UIRQ"))) void name (void)
  29
  30 void irq_handler(void) __attribute__((interrupt ("IRQ"), naked));
  31 void fiq_handler(void) __attribute__((interrupt ("FIQ"), naked, \
  32                                       weak, alias("fiq_dummy")));
  33
  34 default_interrupt(INT_UART0);
  35 default_interrupt(INT_UART1);
  36 default_interrupt(INT_TIMER0);
  37 default_interrupt(INT_TIMER1);
  38 default_interrupt(INT_TIMER2);
  39 default_interrupt(INT_GPIO0);
  40 default_interrupt(INT_SW_INT0);
  41 default_interrupt(INT_AHB0_MAILBOX);
  42 default_interrupt(INT_RTC);
  43 default_interrupt(INT_SCU);
  44 default_interrupt(INT_SD);
  45 default_interrupt(INT_SPI);
  46 default_interrupt(INT_HDMA);
  47 default_interrupt(INT_A2A_BRIDGE);
  48 default_interrupt(INT_I2C);
  49 default_interrupt(INT_I2S);
  50 default_interrupt(INT_UDC);
  51 default_interrupt(INT_UHC);
  52 default_interrupt(INT_PWM0);
  53 default_interrupt(INT_PWM1);
  54 default_interrupt(INT_PWM2);
  55 default_interrupt(INT_ADC);
  56 default_interrupt(INT_GPIO1);
  57 default_interrupt(INT_VIP);
  58 default_interrupt(INT_DWDMA);
  59 default_interrupt(INT_NANDC);
  60 default_interrupt(INT_LCDC);
  61 default_interrupt(INT_DSP);
  62 default_interrupt(INT_SW_INT1);
  63 default_interrupt(INT_SW_INT2);
  64 default_interrupt(INT_SW_INT3);
  65
  66 static void (* const irqvector[])(void) =
  67 {
  68     INT_UART0,INT_UART1,INT_TIMER0,INT_TIMER1,INT_TIMER2,INT_GPIO0,INT_SW_INT0,INT_AHB0_MAILBOX,
  69     INT_RTC,INT_SCU,INT_SD,INT_SPI,INT_HDMA,INT_A2A_BRIDGE,INT_I2C,
  70     INT_I2S,INT_UDC,INT_UHC,INT_PWM0,INT_PWM1,INT_PWM2,INT_ADC,INT_GPIO1,
  71     INT_VIP,INT_DWDMA,INT_NANDC,INT_LCDC,INT_DSP,INT_SW_INT1,INT_SW_INT2,INT_SW_INT3
  72 };
  73
  74 static const char * const irqname[] =
  75 {
  76     "INT_UART0","INT_UART1","INT_TIMER0","INT_TIMER1","INT_TIMER2","INT_GPIO0","INT_SW_INT0","INT_AHB0_MAILBOX",
  77     "INT_RTC","INT_SCU","INT_SD","INT_SPI","INT_HDMA","INT_A2A_BRIDGE","INT_I2C",
  78     "INT_I2S","INT_UDC","INT_UHC","INT_PWM0","INT_PWM1","INT_PWM2","INT_ADC","INT_GPIO1",
  79     "INT_VIP","INT_DWDMA","INT_NANDC","INT_LCDC","INT_DSP","INT_SW_INT1","INT_SW_INT2","INT_SW_INT3"
  80 };
  81
  82 static void UIRQ(void)
  83 {
  84     unsigned int offset = INTC_ISR & 0x1f;
  85     panicf("Unhandled IRQ %02X: %s", offset, irqname[offset]);
  86 }
  87
  88 void irq_handler(void)
  89 {
  90     /*
  91      * Based on: linux/arch/arm/kernel/entry-armv.S and system-meg-fx.c
  92      */
  93
  94     asm volatile(   "stmfd sp!, {r0-r7, ip, lr} \n"   /* Store context */
  95                     "sub   sp, sp, #8           \n"); /* Reserve stack */
  96
  97     int irq_no = INTC_ISR & 0x1f;
  98
  99     irqvector[irq_no]();
 100
 101     /* clear interrupt */
 102     INTC_ICCR = (1 << irq_no);
 103
 104     asm volatile(   "add   sp, sp, #8           \n"   /* Cleanup stack   */
 105                     "ldmfd sp!, {r0-r7, ip, lr} \n"   /* Restore context */
 106                     "subs  pc, lr, #4           \n"); /* Return from IRQ */
 107 }
 108
 109 void fiq_dummy(void)
 110 {
 111     asm volatile (
 112         "subs   pc, lr, #4   \r\n"
 113     );
 114 }
 115
 116
 117 void system_init(void)
 118 {
 119     return;
 120 }
 121
 122 /* not tested */
 123 void system_reboot(void)
 124 {
 125     /* use Watchdog to reset */
 126     WDTLR = 1;
 127     WDTCON = (1<<4) | (1<<3);
 128
 129     /* Wait for reboot to kick in */
 130     while(1);
 131 }
 132
 133 void system_exception_wait(void)
 134 {
 135     while(1);
 136 }
 137
 138 int system_memory_guard(int newmode)
 139 {
 140     (void)newmode;
 141     return 0;
 142 }
 143
 144 /* usecs may be at most 2^32/200 (~21 seconds) for 200MHz max cpu freq */
 145 void udelay(unsigned usecs)
 146 {
 147     unsigned cycles_per_usec;
 148     unsigned delay;
 149
 150     if (cpu_frequency == CPUFREQ_MAX) {
 151         cycles_per_usec = (CPUFREQ_MAX + 999999) / 1000000;
 152     } else {
 153         cycles_per_usec = (CPUFREQ_NORMAL + 999999) / 1000000;
 154     }
 155
 156     delay = (usecs * cycles_per_usec + 3) / 4;
 157
 158     asm volatile(
 159         "1: subs %0, %0, #1  \n"    /* 1 cycle  */
 160         "   bne  1b          \n"    /* 3 cycles */
 161         : : "r"(delay)
 162     );
 163 }
 164