firmware/export/config/sansaview.h

   1 /*
   2  * This config file is for the Sandisk Sansa View
   3  */
   4 #define TARGET_TREE /* this target is using the target tree system */
   5
   6 /* For Rolo and boot loader */
   7 #define MODEL_NUMBER 63
   8 #define MODEL_NAME   "Sandisk View"
   9
  10 #define HW_SAMPR_CAPS       (SAMPR_CAP_44)
  11
  12 /* define this if you have recording possibility */
  13 /* #define HAVE_RECORDING */
  14
  15 #define REC_SAMPR_CAPS      (SAMPR_CAP_22)
  16 #define REC_FREQ_DEFAULT    REC_FREQ_22 /* Default is not 44.1kHz */
  17 #define REC_SAMPR_DEFAULT   SAMPR_22
  18
  19 /* Define bitmask of input sources - recordable bitmask can be defined
  20    explicitly if different */
  21 #define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_FMRADIO)
  22
  23 /* define this if you have a bitmap LCD display */
  24 #define HAVE_LCD_BITMAP
  25
  26 /* define this if you have a colour LCD */
  27 #define HAVE_LCD_COLOR
  28
  29 /* define this if you want album art for this target */
  30 #define HAVE_ALBUMART
  31
  32 /* define this to enable bitmap scaling */
  33 #define HAVE_BMP_SCALING
  34
  35 /* define this to enable JPEG decoding */
  36 #define HAVE_JPEG
  37
  38 /* define this if you have a light associated with the buttons */
  39 #define HAVE_BUTTON_LIGHT
  40
  41 /* define this if you have access to the quickscreen */
  42 #define HAVE_QUICKSCREEN
  43
  44 /* define this if you have access to the pitchscreen */
  45 #define HAVE_PITCHSCREEN
  46
  47 /* define this if you would like tagcache to build on this target */
  48 #define HAVE_TAGCACHE
  49
  50 /* LCD dimensions */
  51 #define LCD_WIDTH  240
  52 #define LCD_HEIGHT 320
  53 #define LCD_DEPTH  16   /* 65536 colours */
  54 #define LCD_PIXELFORMAT RGB565 /* rgb565 */
  55
  56 #ifndef BOOTLOADER
  57 /* define this if you have LCD enable function */
  58 /* #define HAVE_LCD_ENABLE */
  59
  60 /* Define this if your LCD can be put to sleep. HAVE_LCD_ENABLE
  61    should be defined as well. */
  62 /* #define HAVE_LCD_SLEEP */
  63 /* #define HAVE_LCD_SLEEP_SETTING */
  64 #endif
  65
  66 /* define this if you can flip your LCD */
  67 #define HAVE_LCD_FLIP
  68
  69 /* define this if you can invert the colours on your LCD */
  70 #define HAVE_LCD_INVERT
  71
  72 /* #define IRAM_LCDFRAMEBUFFER IDATA_ATTR *//* put the lcd frame buffer in IRAM */
  73
  74 /* The only difference is that the power/hold is on the left instead of right on Fuze */
  75 #define CONFIG_KEYPAD SANSA_FUZE_PAD
  76
  77 /* Define this to enable morse code input */
  78 #define HAVE_MORSE_INPUT
  79
  80 /* Define this if you do software codec */
  81 #define CONFIG_CODEC SWCODEC
  82 /* There is no hardware tone control */
  83 #define HAVE_SW_TONE_CONTROLS
  84
  85 /* define this if you have a real-time clock */
  86 #ifndef BOOTLOADER
  87 /* #define CONFIG_RTC RTC_ */
  88 #endif
  89
  90 /* Define this if you have a software controlled poweroff */
  91 #define HAVE_SW_POWEROFF
  92
  93 /* Required for MicroSD cards */
  94 #define HAVE_FAT16SUPPORT
  95
  96 /* The number of bytes reserved for loadable codecs */
  97 #define CODEC_SIZE 0x100000
  98
  99 /* The number of bytes reserved for loadable plugins */
 100 #define PLUGIN_BUFFER_SIZE 0x80000
 101
 102 #define AB_REPEAT_ENABLE 1
 103
 104 /* Define this for LCD backlight available */
 105 #define HAVE_BACKLIGHT
 106 /* #define HAVE_BACKLIGHT_BRIGHTNESS */
 107
 108 /* define this if the unit uses a scrollwheel for navigation */
 109 #define HAVE_SCROLLWHEEL
 110 /* define to activate advanced wheel acceleration code */
 111 #define HAVE_WHEEL_ACCELERATION
 112 /* define from which rotation speed [degree/sec] on the acceleration starts */
 113 #define WHEEL_ACCEL_START 540
 114 /* define type of acceleration (1 = ^2, 2 = ^3, 3 = ^4) */
 115 #define WHEEL_ACCELERATION 1
 116
 117 /* define this if you have a flash memory storage */
 118 #define HAVE_FLASH_STORAGE
 119
 120 /* define this if the flash memory uses the SecureDigital Memory Card protocol */
 121 #define CONFIG_STORAGE STORAGE_SD
 122
 123 #define BATTERY_CAPACITY_DEFAULT 750    /* default battery capacity */
 124 #define BATTERY_CAPACITY_MIN 750        /* min. capacity selectable */
 125 #define BATTERY_CAPACITY_MAX 750        /* max. capacity selectable */
 126 #define BATTERY_CAPACITY_INC 0          /* capacity increment */
 127 #define BATTERY_TYPES_COUNT  1          /* only one type */
 128
 129 /* Charging implemented in a target-specific algorithm */
 130 #define CONFIG_CHARGING CHARGING_SIMPLE
 131 #define HAVE_POWEROFF_WHILE_CHARGING
 132
 133 /* define current usage levels */
 134 #define CURRENT_NORMAL     30  /* Toni's measurements in Nov 2008  */
 135 #define CURRENT_BACKLIGHT  40  /* Screen is about 20, blue LEDs are another 20, so 40 if both */
 136 #define CURRENT_RECORD     30  /* flash player, so this is just unboosted current*/
 137
 138 /* define this if the unit can be powered or charged via USB */
 139 #define HAVE_USB_POWER
 140
 141 /* Define this if you have a PortalPlayer PP5024 */
 142 #define CONFIG_CPU PP6100
 143
 144 /* Define this if you want to use the PP5024 i2c interface */
 145 #define CONFIG_I2C I2C_PP5024
 146
 147 /* define this if the hardware can be powered off while charging */
 148 /* Sansa can't be powered off while charging */
 149 /* #define HAVE_POWEROFF_WHILE_CHARGING */
 150
 151 /* The start address index for ROM builds */
 152 #define ROM_START 0x00000000
 153
 154 /* Define this to the CPU frequency */
 155 #define CPU_FREQ      250000000
 156
 157 /* Type of LCD TODO: hopefully the same as the x5 but check this*/
 158 #define CONFIG_LCD LCD_VIEW
 159
 160 /* Offset ( in the firmware file's header ) to the file CRC and data. These are
 161    only used when loading the old format rockbox.e200 file
 162    Required for bootloader/common.c to compile */
 163 #define FIRMWARE_OFFSET_FILE_CRC    0x0
 164 #define FIRMWARE_OFFSET_FILE_DATA   0x8
 165
 166 #ifndef BOOTLOADER
 167 #define HAVE_MULTIDRIVE
 168 #define NUM_DRIVES 2
 169 #define HAVE_HOTSWAP
 170 #endif
 171
 172 /* USB On-the-go */
 173 /* #define CONFIG_USBOTG USBOTG_ARC */
 174
 175 /* enable these for the experimental usb stack */
 176 #define HAVE_USBSTACK
 177 #define USE_ROCKBOX_USB
 178 #define USB_VENDOR_ID 0x0781
 179 #define USB_PRODUCT_ID 0x74b1
 180
 181 /* Define this if you have adjustable CPU frequency */
 182 /* #define HAVE_ADJUSTABLE_CPU_FREQ */
 183
 184 #define MI4_FORMAT
 185 #define BOOTFILE_EXT    "mi4"
 186 #define BOOTFILE        "rockbox." BOOTFILE_EXT
 187 #define BOOTDIR "/.rockbox"
 188
 189 #define ICODE_ATTR_TREMOR_NOT_MDCT
 190
 191 #define INCLUDE_TIMEOUT_API
 192
 193 /** Port-specific settings **/
 194
 195 /* Main LCD backlight brightness range and defaults */
 196 #define MIN_BRIGHTNESS_SETTING      1
 197 #define MAX_BRIGHTNESS_SETTING     12
 198 #define DEFAULT_BRIGHTNESS_SETTING  6
 199
 200 /* Default recording levels */
 201 #define DEFAULT_REC_MIC_GAIN    23
 202 #define DEFAULT_REC_LEFT_GAIN   23
 203 #define DEFAULT_REC_RIGHT_GAIN  23
 204
 205 /* Define this if a programmable hotkey is mapped */
 206 #define HAVE_HOTKEY