6092 rtld should always provide assfail/assfail3

[illumos-gate.git] / usr / src / cmd / sgs / rtld / common / util.c

/*
 * CDDL HEADER START
 *
 * The contents of this file are subject to the terms of the
 * Common Development and Distribution License (the "License").
 * You may not use this file except in compliance with the License.
 *
 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
 * or http://www.opensolaris.org/os/licensing.
 * See the License for the specific language governing permissions
 * and limitations under the License.
 *
 * When distributing Covered Code, include this CDDL HEADER in each
 * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
 * If applicable, add the following below this CDDL HEADER, with the
 * fields enclosed by brackets "[]" replaced with your own identifying
 * information: Portions Copyright [yyyy] [name of copyright owner]
 *
 * CDDL HEADER END
 */

/*
 *      Copyright (c) 1988 AT&T
 *        All Rights Reserved
 *
 * Copyright (c) 1990, 2010, Oracle and/or its affiliates. All rights reserved.
 */

/*
 * Copyright (c) 2014 by Delphix. All rights reserved.
 */

/*
 * Utility routines for run-time linker.  some are duplicated here from libc
 * (with different names) to avoid name space collisions.
 */
#include        <sys/systeminfo.h>
#include        <stdio.h>
#include        <sys/time.h>
#include        <sys/types.h>
#include        <sys/mman.h>
#include        <sys/lwp.h>
#include        <sys/debug.h>
#include        <stdarg.h>
#include        <fcntl.h>
#include        <string.h>
#include        <dlfcn.h>
#include        <unistd.h>
#include        <stdlib.h>
#include        <sys/auxv.h>
#include        <limits.h>
#include        <debug.h>
#include        <conv.h>
#include        "_rtld.h"
#include        "_audit.h"
#include        "_elf.h"
#include        "msg.h"

/*
 * Null function used as place where a debugger can set a breakpoint.
 */
void
rtld_db_dlactivity(Lm_list *lml)
{
        DBG_CALL(Dbg_util_dbnotify(lml, r_debug.rtd_rdebug.r_rdevent,
            r_debug.rtd_rdebug.r_state));
}

/*
 * Null function used as place where debugger can set a pre .init
 * processing breakpoint.
 */
void
rtld_db_preinit(Lm_list *lml)
{
        DBG_CALL(Dbg_util_dbnotify(lml, r_debug.rtd_rdebug.r_rdevent,
            r_debug.rtd_rdebug.r_state));
}

/*
 * Null function used as place where debugger can set a post .init
 * processing breakpoint.
 */
void
rtld_db_postinit(Lm_list *lml)
{
        DBG_CALL(Dbg_util_dbnotify(lml, r_debug.rtd_rdebug.r_rdevent,
            r_debug.rtd_rdebug.r_state));
}

/*
 * Debugger Event Notification
 *
 * This function centralizes all debugger event notification (ala rtld_db).
 *
 * There's a simple intent, focused on insuring the primary link-map control
 * list (or each link-map list) is consistent, and the indication that objects
 * have been added or deleted from this list.  Although an RD_ADD and RD_DELETE
 * event are posted for each of these, most debuggers don't care, as their
 * view is that these events simply convey an "inconsistent" state.
 *
 * We also don't want to trigger multiple RD_ADD/RD_DELETE events any time we
 * enter ld.so.1.
 *
 * Set an RD_ADD/RD_DELETE event and indicate that an RD_CONSISTENT event is
 * required later (RT_FL_DBNOTIF):
 *
 *  i.  the first time we add or delete an object to the primary link-map
 *      control list.
 *  ii. the first time we move a secondary link-map control list to the primary
 *      link-map control list (effectively, this is like adding a group of
 *      objects to the primary link-map control list).
 *
 * Set an RD_CONSISTENT event when it is required (RT_FL_DBNOTIF is set):
 *
 *  i.  each time we leave the runtime linker.
 */
void
rd_event(Lm_list *lml, rd_event_e event, r_state_e state)
{
        void    (*fptr)(Lm_list *);

        switch (event) {
        case RD_PREINIT:
                fptr = rtld_db_preinit;
                break;
        case RD_POSTINIT:
                fptr = rtld_db_postinit;
                break;
        case RD_DLACTIVITY:
                switch (state) {
                case RT_CONSISTENT:
                        /*
                         * Do we need to send a notification?
                         */
                        if ((rtld_flags & RT_FL_DBNOTIF) == 0)
                                return;
                        rtld_flags &= ~RT_FL_DBNOTIF;
                        break;
                case RT_ADD:
                case RT_DELETE:
                        /*
                         * If we are already in an inconsistent state, no
                         * notification is required.
                         */
                        if (rtld_flags & RT_FL_DBNOTIF)
                                return;
                        rtld_flags |= RT_FL_DBNOTIF;
                        break;
                };
                fptr = rtld_db_dlactivity;
                break;
        default:
                /*
                 * RD_NONE - do nothing
                 */
                break;
        };

        /*
         * Set event state and call 'notification' function.
         *
         * The debugging clients have previously been told about these
         * notification functions and have set breakpoints on them if they
         * are interested in the notification.
         */
        r_debug.rtd_rdebug.r_state = state;
        r_debug.rtd_rdebug.r_rdevent = event;
        fptr(lml);
        r_debug.rtd_rdebug.r_rdevent = RD_NONE;
}

#if     defined(__sparc) || defined(__x86)
/*
 * Stack Cleanup.
 *
 * This function is invoked to 'remove' arguments that were passed in on the
 * stack.  This is most likely if ld.so.1 was invoked directly.  In that case
 * we want to remove ld.so.1 as well as it's arguments from the argv[] array.
 * Which means we then need to slide everything above it on the stack down
 * accordingly.
 *
 * While the stack layout is platform specific - it just so happens that __x86,
 * and __sparc platforms share the following initial stack layout.
 *
 *      !_______________________!  high addresses
 *      !                       !
 *      !       Information     !
 *      !       Block           !
 *      !       (size varies)   !
 *      !_______________________!
 *      !       0 word          !
 *      !_______________________!
 *      !       Auxiliary       !
 *      !       vector          !
 *      !       2 word entries  !
 *      !                       !
 *      !_______________________!
 *      !       0 word          !
 *      !_______________________!
 *      !       Environment     !
 *      !       pointers        !
 *      !       ...             !
 *      !       (one word each) !
 *      !_______________________!
 *      !       0 word          !
 *      !_______________________!
 *      !       Argument        ! low addresses
 *      !       pointers        !
 *      !       Argc words      !
 *      !_______________________!
 *      !                       !
 *      !       Argc            !
 *      !_______________________!
 *      !       ...             !
 *
 */
static void
stack_cleanup(char **argv, char ***envp, auxv_t **auxv, int rmcnt)
{
        int             ndx;
        long            *argc;
        char            **oargv, **nargv;
        char            **oenvp, **nenvp;
        auxv_t          *oauxv, *nauxv;

        /*
         * Slide ARGV[] and update argc.  The argv pointer remains the same,
         * however slide the applications arguments over the arguments to
         * ld.so.1.
         */
        nargv = &argv[0];
        oargv = &argv[rmcnt];

        for (ndx = 0; oargv[ndx]; ndx++)
                nargv[ndx] = oargv[ndx];
        nargv[ndx] = oargv[ndx];

        argc = (long *)((uintptr_t)argv - sizeof (long *));
        *argc -= rmcnt;

        /*
         * Slide ENVP[], and update the environment array pointer.
         */
        ndx++;
        nenvp = &nargv[ndx];
        oenvp = &oargv[ndx];
        *envp = nenvp;

        for (ndx = 0; oenvp[ndx]; ndx++)
                nenvp[ndx] = oenvp[ndx];
        nenvp[ndx] = oenvp[ndx];

        /*
         * Slide AUXV[], and update the aux vector pointer.
         */
        ndx++;
        nauxv = (auxv_t *)&nenvp[ndx];
        oauxv = (auxv_t *)&oenvp[ndx];
        *auxv = nauxv;

        for (ndx = 0; (oauxv[ndx].a_type != AT_NULL); ndx++)
                nauxv[ndx] = oauxv[ndx];
        nauxv[ndx] = oauxv[ndx];
}
#else
/*
 * Verify that the above routine is appropriate for any new platforms.
 */
#error  unsupported architecture!
#endif

/*
 * Compare function for PathNode AVL tree.
 */
static int
pnavl_compare(const void *n1, const void *n2)
{
        uint_t          hash1, hash2;
        const char      *st1, *st2;
        int             rc;

        hash1 = ((PathNode *)n1)->pn_hash;
        hash2 = ((PathNode *)n2)->pn_hash;

        if (hash1 > hash2)
                return (1);
        if (hash1 < hash2)
                return (-1);

        st1 = ((PathNode *)n1)->pn_name;
        st2 = ((PathNode *)n2)->pn_name;

        rc = strcmp(st1, st2);
        if (rc > 0)
                return (1);
        if (rc < 0)
                return (-1);
        return (0);
}

/*
 * Create an AVL tree.
 */
static avl_tree_t *
pnavl_create(size_t size)
{
        avl_tree_t      *avlt;

        if ((avlt = malloc(sizeof (avl_tree_t))) == NULL)
                return (NULL);
        avl_create(avlt, pnavl_compare, size, SGSOFFSETOF(PathNode, pn_avl));
        return (avlt);
}

/*
 * Determine whether a PathNode is recorded.
 */
int
pnavl_recorded(avl_tree_t **pnavl, const char *name, uint_t hash,
    avl_index_t *where)
{
        PathNode        pn;

        /*
         * Create the avl tree if required.
         */
        if ((*pnavl == NULL) &&
            ((*pnavl = pnavl_create(sizeof (PathNode))) == NULL))
                return (0);

        pn.pn_name = name;
        if ((pn.pn_hash = hash) == 0)
                pn.pn_hash = sgs_str_hash(name);

        if (avl_find(*pnavl, &pn, where) == NULL)
                return (0);

        return (1);
}

/*
 * Determine if a pathname has already been recorded on the full path name
 * AVL tree.  This tree maintains a node for each path name that ld.so.1 has
 * successfully loaded.  If the path name does not exist in this AVL tree, then
 * the next insertion point is deposited in "where".  This value can be used by
 * fpavl_insert() to expedite the insertion.
 */
Rt_map *
fpavl_recorded(Lm_list *lml, const char *name, uint_t hash, avl_index_t *where)
{
        FullPathNode    fpn, *fpnp;

        /*
         * Create the avl tree if required.
         */
        if ((lml->lm_fpavl == NULL) &&
            ((lml->lm_fpavl = pnavl_create(sizeof (FullPathNode))) == NULL))
                return (NULL);

        fpn.fpn_node.pn_name = name;
        if ((fpn.fpn_node.pn_hash = hash) == 0)
                fpn.fpn_node.pn_hash = sgs_str_hash(name);

        if ((fpnp = avl_find(lml->lm_fpavl, &fpn, where)) == NULL)
                return (NULL);

        return (fpnp->fpn_lmp);
}

/*
 * Insert a name into the FullPathNode AVL tree for the link-map list.  The
 * objects NAME() is the path that would have originally been searched for, and
 * is therefore the name to associate with any "where" value.  If the object has
 * a different PATHNAME(), perhaps because it has resolved to a different file
 * (see fullpath()), then this name will be recorded as a separate FullPathNode
 * (see load_file()).
 */
int
fpavl_insert(Lm_list *lml, Rt_map *lmp, const char *name, avl_index_t where)
{
        FullPathNode    *fpnp;
        uint_t          hash = sgs_str_hash(name);

        if (where == 0) {
                /* LINTED */
                Rt_map  *_lmp = fpavl_recorded(lml, name, hash, &where);

                /*
                 * We better not get a hit now, we do not want duplicates in
                 * the tree.
                 */
                ASSERT(_lmp == NULL);
        }

        /*
         * Insert new node in tree.
         */
        if ((fpnp = calloc(sizeof (FullPathNode), 1)) == NULL)
                return (0);

        fpnp->fpn_node.pn_name = name;
        fpnp->fpn_node.pn_hash = hash;
        fpnp->fpn_lmp = lmp;

        if (aplist_append(&FPNODE(lmp), fpnp, AL_CNT_FPNODE) == NULL) {
                free(fpnp);
                return (0);
        }

        ASSERT(lml->lm_fpavl != NULL);
        avl_insert(lml->lm_fpavl, fpnp, where);
        return (1);
}

/*
 * Remove an object from the FullPathNode AVL tree.
 */
void
fpavl_remove(Rt_map *lmp)
{
        FullPathNode    *fpnp;
        Aliste          idx;

        for (APLIST_TRAVERSE(FPNODE(lmp), idx, fpnp)) {
                avl_remove(LIST(lmp)->lm_fpavl, fpnp);
                free(fpnp);
        }
        free(FPNODE(lmp));
        FPNODE(lmp) = NULL;
}

/*
 * Insert a path name into the not-found AVL tree.
 *
 * This tree maintains a node for each path name that ld.so.1 has explicitly
 * inspected, but has failed to load during a single ld.so.1 operation.  If the
 * path name does not exist in this AVL tree, then the next insertion point is
 * deposited in "where".  This value can be used by nfavl_insert() to expedite
 * the insertion.
 */
void
nfavl_insert(const char *name, avl_index_t where)
{
        PathNode        *pnp;
        uint_t          hash = sgs_str_hash(name);

        if (where == 0) {
                /* LINTED */
                int     in_nfavl = pnavl_recorded(&nfavl, name, hash, &where);

                /*
                 * We better not get a hit now, we do not want duplicates in
                 * the tree.
                 */
                ASSERT(in_nfavl == 0);
        }

        /*
         * Insert new node in tree.
         */
        if ((pnp = calloc(sizeof (PathNode), 1)) != NULL) {
                pnp->pn_name = name;
                pnp->pn_hash = hash;
                avl_insert(nfavl, pnp, where);
        }
}

/*
 * Insert the directory name, of a full path name, into the secure path AVL
 * tree.
 *
 * This tree is used to maintain a list of directories in which the dependencies
 * of a secure process have been found.  This list provides a fall-back in the
 * case that a $ORIGIN expansion is deemed insecure, when the expansion results
 * in a path name that has already provided dependencies.
 */
void
spavl_insert(const char *name)
{
        char            buffer[PATH_MAX], *str;
        size_t          size;
        avl_index_t     where;
        PathNode        *pnp;
        uint_t          hash;

        /*
         * Separate the directory name from the path name.
         */
        if ((str = strrchr(name, '/')) == name)
                size = 1;
        else
                size = str - name;

        (void) strncpy(buffer, name, size);
        buffer[size] = '\0';
        hash = sgs_str_hash(buffer);

        /*
         * Determine whether this directory name is already recorded, or if
         * not, 'where" will provide the insertion point for the new string.
         */
        if (pnavl_recorded(&spavl, buffer, hash, &where))
                return;

        /*
         * Insert new node in tree.
         */
        if ((pnp = calloc(sizeof (PathNode), 1)) != NULL) {
                pnp->pn_name = strdup(buffer);
                pnp->pn_hash = hash;
                avl_insert(spavl, pnp, where);
        }
}

/*
 * Inspect the generic string AVL tree for the given string.  If the string is
 * not present, duplicate it, and insert the string in the AVL tree.  Return the
 * duplicated string to the caller.
 *
 * These strings are maintained for the life of ld.so.1 and represent path
 * names, file names, and search paths.  All other AVL trees that maintain
 * FullPathNode and not-found path names use the same string pointer
 * established for this string.
 */
static avl_tree_t       *stravl = NULL;
static char             *strbuf = NULL;
static PathNode         *pnbuf = NULL;
static size_t           strsize = 0, pnsize = 0;

const char *
stravl_insert(const char *name, uint_t hash, size_t nsize, int substr)
{
        char            str[PATH_MAX];
        PathNode        *pnp;
        avl_index_t     where;

        /*
         * Create the avl tree if required.
         */
        if ((stravl == NULL) &&
            ((stravl = pnavl_create(sizeof (PathNode))) == NULL))
                return (NULL);

        /*
         * Determine the string size if not provided by the caller.
         */
        if (nsize == 0)
                nsize = strlen(name) + 1;
        else if (substr) {
                /*
                 * The string passed to us may be a multiple path string for
                 * which we only need the first component.  Using the provided
                 * size, strip out the required string.
                 */
                (void) strncpy(str, name, nsize);
                str[nsize - 1] = '\0';
                name = str;
        }

        /*
         * Allocate a PathNode buffer if one doesn't exist, or any existing
         * buffer has been used up.
         */
        if ((pnbuf == NULL) || (sizeof (PathNode) > pnsize)) {
                pnsize = syspagsz;
                if ((pnbuf = dz_map(0, 0, pnsize, (PROT_READ | PROT_WRITE),
                    MAP_PRIVATE)) == MAP_FAILED)
                        return (NULL);
        }
        /*
         * Determine whether this string already exists.
         */
        pnbuf->pn_name = name;
        if ((pnbuf->pn_hash = hash) == 0)
                pnbuf->pn_hash = sgs_str_hash(name);

        if ((pnp = avl_find(stravl, pnbuf, &where)) != NULL)
                return (pnp->pn_name);

        /*
         * Allocate a string buffer if one does not exist, or if there is
         * insufficient space for the new string in any existing buffer.
         */
        if ((strbuf == NULL) || (nsize > strsize)) {
                strsize = S_ROUND(nsize, syspagsz);

                if ((strbuf = dz_map(0, 0, strsize, (PROT_READ | PROT_WRITE),
                    MAP_PRIVATE)) == MAP_FAILED)
                        return (NULL);
        }

        (void) memcpy(strbuf, name, nsize);
        pnp = pnbuf;
        pnp->pn_name = strbuf;
        avl_insert(stravl, pnp, where);

        strbuf += nsize;
        strsize -= nsize;
        pnbuf++;
        pnsize -= sizeof (PathNode);
        return (pnp->pn_name);
}

/*
 * Prior to calling an object, either via a .plt or through dlsym(), make sure
 * its .init has fired.  Through topological sorting, ld.so.1 attempts to fire
 * init's in the correct order, however, this order is typically based on needed
 * dependencies and non-lazy relocation bindings.  Lazy relocations (.plts) can
 * still occur and result in bindings that were not captured during topological
 * sorting.  This routine compensates for this lack of binding information, and
 * provides for dynamic .init firing.
 */
void
is_dep_init(Rt_map *dlmp, Rt_map *clmp)
{
        Rt_map  **tobj;

        /*
         * If the caller is an auditor, and the destination isn't, then don't
         * run any .inits (see comments in load_completion()).
         */
        if ((LIST(clmp)->lm_tflags & LML_TFLG_NOAUDIT) &&
            ((LIST(dlmp)->lm_tflags & LML_TFLG_NOAUDIT) == 0))
                return;

        if ((dlmp == clmp) || (rtld_flags & RT_FL_INITFIRST))
                return;

        (void) rt_mutex_lock(&dlmp->rt_lock);
        while (dlmp->rt_init_thread != rt_thr_self() && (FLAGS(dlmp) &
            (FLG_RT_RELOCED | FLG_RT_INITCALL | FLG_RT_INITDONE)) ==
            (FLG_RT_RELOCED | FLG_RT_INITCALL)) {
                leave(LIST(dlmp), 0);
                (void) _lwp_cond_wait(&dlmp->rt_cv, (mutex_t *)&dlmp->rt_lock);
                (void) rt_mutex_unlock(&dlmp->rt_lock);
                (void) enter(0);
                (void) rt_mutex_lock(&dlmp->rt_lock);
        }
        (void) rt_mutex_unlock(&dlmp->rt_lock);

        if ((FLAGS(dlmp) & (FLG_RT_RELOCED | FLG_RT_INITDONE)) ==
            (FLG_RT_RELOCED | FLG_RT_INITDONE))
                return;

        if ((tobj = calloc(2, sizeof (Rt_map *))) != NULL) {
                tobj[0] = dlmp;
                call_init(tobj, DBG_INIT_DYN);
        }
}

/*
 * Execute .{preinit|init|fini}array sections
 */
void
call_array(Addr *array, uint_t arraysz, Rt_map *lmp, Word shtype)
{
        int     start, stop, incr, ndx;
        uint_t  arraycnt = (uint_t)(arraysz / sizeof (Addr));

        if (array == NULL)
                return;

        /*
         * initarray & preinitarray are walked from beginning to end - while
         * finiarray is walked from end to beginning.
         */
        if (shtype == SHT_FINI_ARRAY) {
                start = arraycnt - 1;
                stop = incr = -1;
        } else {
                start = 0;
                stop = arraycnt;
                incr = 1;
        }

        /*
         * Call the .*array[] entries
         */
        for (ndx = start; ndx != stop; ndx += incr) {
                uint_t  rtldflags;
                void    (*fptr)(void) = (void(*)())array[ndx];

                DBG_CALL(Dbg_util_call_array(lmp, (void *)fptr, ndx, shtype));

                APPLICATION_ENTER(rtldflags);
                leave(LIST(lmp), 0);
                (*fptr)();
                (void) enter(0);
                APPLICATION_RETURN(rtldflags);
        }
}

/*
 * Execute any .init sections.  These are passed to us in an lmp array which
 * (by default) will have been sorted.
 */
void
call_init(Rt_map **tobj, int flag)
{
        Rt_map          **_tobj, **_nobj;
        static APlist   *pending = NULL;

        /*
         * If we're in the middle of an INITFIRST, this must complete before
         * any new init's are fired.  In this case add the object list to the
         * pending queue and return.  We'll pick up the queue after any
         * INITFIRST objects have their init's fired.
         */
        if (rtld_flags & RT_FL_INITFIRST) {
                (void) aplist_append(&pending, tobj, AL_CNT_PENDING);
                return;
        }

        /*
         * Traverse the tobj array firing each objects init.
         */
        for (_tobj = _nobj = tobj, _nobj++; *_tobj != NULL; _tobj++, _nobj++) {
                Rt_map  *lmp = *_tobj;
                void    (*iptr)() = INIT(lmp);

                if (FLAGS(lmp) & FLG_RT_INITCALL)
                        continue;

                FLAGS(lmp) |= FLG_RT_INITCALL;
                lmp->rt_init_thread = rt_thr_self();

                /*
                 * Establish an initfirst state if necessary - no other inits
                 * will be fired (because of additional relocation bindings)
                 * when in this state.
                 */
                if (FLAGS(lmp) & FLG_RT_INITFRST)
                        rtld_flags |= RT_FL_INITFIRST;

                if (INITARRAY(lmp) || iptr)
                        DBG_CALL(Dbg_util_call_init(lmp, flag));

                if (iptr) {
                        uint_t  rtldflags;

                        APPLICATION_ENTER(rtldflags);
                        leave(LIST(lmp), 0);
                        (*iptr)();
                        (void) enter(0);
                        APPLICATION_RETURN(rtldflags);
                }

                call_array(INITARRAY(lmp), INITARRAYSZ(lmp), lmp,
                    SHT_INIT_ARRAY);

                if (INITARRAY(lmp) || iptr)
                        DBG_CALL(Dbg_util_call_init(lmp, DBG_INIT_DONE));

                /*
                 * Set the initdone flag regardless of whether this object
                 * actually contains an .init section.  This flag prevents us
                 * from processing this section again for an .init and also
                 * signifies that a .fini must be called should it exist.
                 * Clear the sort field for use in later .fini processing.
                 */
                (void) rt_mutex_lock(&lmp->rt_lock);
                FLAGS(lmp) |= FLG_RT_INITDONE;
                lmp->rt_init_thread = (thread_t)0;
                (void) _lwp_cond_broadcast(&lmp->rt_cv);
                (void) rt_mutex_unlock(&lmp->rt_lock);
                SORTVAL(lmp) = -1;

                /*
                 * If we're firing an INITFIRST object, and other objects must
                 * be fired which are not INITFIRST, make sure we grab any
                 * pending objects that might have been delayed as this
                 * INITFIRST was processed.
                 */
                if ((rtld_flags & RT_FL_INITFIRST) &&
                    ((*_nobj == NULL) || !(FLAGS(*_nobj) & FLG_RT_INITFRST))) {
                        Aliste  idx;
                        Rt_map  **pobj;

                        rtld_flags &= ~RT_FL_INITFIRST;

                        for (APLIST_TRAVERSE(pending, idx, pobj)) {
                                aplist_delete(pending, &idx);
                                call_init(pobj, DBG_INIT_PEND);
                        }
                }
        }
        free(tobj);
}

/*
 * Call .fini sections for the topologically sorted list of objects.  This
 * routine is called from remove_hdl() for any objects being torn down as part
 * of a dlclose() operation, and from atexit() processing for all the remaining
 * objects within the process.
 */
void
call_fini(Lm_list *lml, Rt_map **tobj, Rt_map *clmp)
{
        Rt_map **_tobj;

        for (_tobj = tobj; *_tobj != NULL; _tobj++) {
                Rt_map          *lmp = *_tobj;

                /*
                 * Only fire a .fini if the objects corresponding .init has
                 * completed.  We collect all .fini sections of objects that
                 * had their .init collected, but that doesn't mean that at
                 * the time of collection, that the .init had completed.
                 */
                if (FLAGS(lmp) & FLG_RT_INITDONE) {
                        void    (*fptr)(void) = FINI(lmp);

                        if (FINIARRAY(lmp) || fptr)
                                DBG_CALL(Dbg_util_call_fini(lmp));

                        call_array(FINIARRAY(lmp), FINIARRAYSZ(lmp), lmp,
                            SHT_FINI_ARRAY);

                        if (fptr) {
                                uint_t  rtldflags;

                                APPLICATION_ENTER(rtldflags);
                                leave(lml, 0);
                                (*fptr)();
                                (void) enter(0);
                                APPLICATION_RETURN(rtldflags);
                        }
                }

                /*
                 * Skip main, this is explicitly called last in atexit_fini().
                 */
                if (FLAGS(lmp) & FLG_RT_ISMAIN)
                        continue;

                /*
                 * This object has exercised its last instructions (regardless
                 * of whether it will be unmapped or not).  Audit this closure.
                 */
                if ((lml->lm_tflags & LML_TFLG_NOAUDIT) == 0)
                        audit_objclose(lmp, clmp);
        }

        DBG_CALL(Dbg_bind_plt_summary(lml, M_MACH, pltcnt21d, pltcnt24d,
            pltcntu32, pltcntu44, pltcntfull, pltcntfar));

        free(tobj);
}

/*
 * Function called by atexit(3C).  Calls all .fini sections within the objects
 * that make up the process.  As .fini processing is the last opportunity for
 * any new bindings to be established, this is also a convenient location to
 * check for unused objects.
 */
void
atexit_fini()
{
        Rt_map  **tobj, *lmp;
        Lm_list *lml;
        Aliste  idx;

        (void) enter(0);

        rtld_flags |= RT_FL_ATEXIT;

        lml = &lml_main;
        lml->lm_flags |= LML_FLG_ATEXIT;
        lml->lm_flags &= ~LML_FLG_INTRPOSETSORT;
        lmp = (Rt_map *)lml->lm_head;

        /*
         * Reverse topologically sort the main link-map for .fini execution.
         */
        if (((tobj = tsort(lmp, lml->lm_obj, RT_SORT_FWD)) != NULL) &&
            (tobj != (Rt_map **)S_ERROR))
                call_fini(lml, tobj, NULL);

        /*
         * Now that all .fini code has been run, see what unreferenced objects
         * remain.
         */
        unused(lml);

        /*
         * Traverse any alternative link-map lists, looking for non-auditors.
         */
        for (APLIST_TRAVERSE(dynlm_list, idx, lml)) {
                /*
                 * Ignore the base-link-map list, which has already been
                 * processed, the runtime linkers link-map list, which is
                 * processed last, and any auditors.
                 */
                if ((lml->lm_flags & (LML_FLG_BASELM | LML_FLG_RTLDLM)) ||
                    (lml->lm_tflags & LML_TFLG_AUD_MASK) ||
                    ((lmp = (Rt_map *)lml->lm_head) == NULL))
                        continue;

                lml->lm_flags |= LML_FLG_ATEXIT;
                lml->lm_flags &= ~LML_FLG_INTRPOSETSORT;

                /*
                 * Reverse topologically sort the link-map for .fini execution.
                 */
                if (((tobj = tsort(lmp, lml->lm_obj, RT_SORT_FWD)) != NULL) &&
                    (tobj != (Rt_map **)S_ERROR))
                        call_fini(lml, tobj, NULL);

                unused(lml);
        }

        /*
         * Add an explicit close to main and ld.so.1.  Although main's .fini is
         * collected in call_fini() to provide for FINITARRAY processing, its
         * audit_objclose is explicitly skipped.  This provides for it to be
         * called last, here.  This is the reverse of the explicit calls to
         * audit_objopen() made in setup().
         */
        lml = &lml_main;
        lmp = (Rt_map *)lml->lm_head;

        if ((lml->lm_tflags | AFLAGS(lmp)) & LML_TFLG_AUD_MASK) {
                audit_objclose((Rt_map *)lml_rtld.lm_head, lmp);
                audit_objclose(lmp, lmp);
        }

        /*
         * Traverse any alternative link-map lists, looking for non-auditors.
         */
        for (APLIST_TRAVERSE(dynlm_list, idx, lml)) {
                /*
                 * Ignore the base-link-map list, which has already been
                 * processed, the runtime linkers link-map list, which is
                 * processed last, and any non-auditors.
                 */
                if ((lml->lm_flags & (LML_FLG_BASELM | LML_FLG_RTLDLM)) ||
                    ((lml->lm_tflags & LML_TFLG_AUD_MASK) == 0) ||
                    ((lmp = (Rt_map *)lml->lm_head) == NULL))
                        continue;

                lml->lm_flags |= LML_FLG_ATEXIT;
                lml->lm_flags &= ~LML_FLG_INTRPOSETSORT;

                /*
                 * Reverse topologically sort the link-map for .fini execution.
                 */
                if (((tobj = tsort(lmp, lml->lm_obj, RT_SORT_FWD)) != NULL) &&
                    (tobj != (Rt_map **)S_ERROR))
                        call_fini(lml, tobj, NULL);

                unused(lml);
        }

        /*
         * Finally reverse topologically sort the runtime linkers link-map for
         * .fini execution.
         */
        lml = &lml_rtld;
        lml->lm_flags |= LML_FLG_ATEXIT;
        lml->lm_flags &= ~LML_FLG_INTRPOSETSORT;
        lmp = (Rt_map *)lml->lm_head;

        if (((tobj = tsort(lmp, lml->lm_obj, RT_SORT_FWD)) != NULL) &&
            (tobj != (Rt_map **)S_ERROR))
                call_fini(lml, tobj, NULL);

        leave(&lml_main, 0);
}

/*
 * This routine is called to complete any runtime linker activity which may have
 * resulted in objects being loaded.  This is called from all user entry points
 * and from any internal dl*() requests.
 */
void
load_completion(Rt_map *nlmp)
{
        Rt_map  **tobj = NULL;
        Lm_list *nlml;

        /*
         * Establish any .init processing.  Note, in a world of lazy loading,
         * objects may have been loaded regardless of whether the users request
         * was fulfilled (i.e., a dlsym() request may have failed to find a
         * symbol but objects might have been loaded during its search).  Thus,
         * any tsorting starts from the nlmp (new link-maps) pointer and not
         * necessarily from the link-map that may have satisfied the request.
         *
         * Note, the primary link-map has an initialization phase where dynamic
         * .init firing is suppressed.  This provides for a simple and clean
         * handshake with the primary link-maps libc, which is important for
         * establishing uberdata.  In addition, auditors often obtain handles
         * to primary link-map objects as the objects are loaded, so as to
         * inspect the link-map for symbols.  This inspection is allowed without
         * running any code on the primary link-map, as running this code may
         * reenter the auditor, who may not yet have finished its own
         * initialization.
         */
        if (nlmp)
                nlml = LIST(nlmp);

        if (nlmp && nlml->lm_init && ((nlml != &lml_main) ||
            (rtld_flags2 & (RT_FL2_PLMSETUP | RT_FL2_NOPLM)))) {
                if ((tobj = tsort(nlmp, nlml->lm_init,
                    RT_SORT_REV)) == (Rt_map **)S_ERROR)
                        tobj = NULL;
        }

        /*
         * Make sure any alternative link-map retrieves any external interfaces
         * and initializes threads.
         */
        if (nlmp && (nlml != &lml_main)) {
                (void) rt_get_extern(nlml, nlmp);
                rt_thr_init(nlml);
        }

        /*
         * Traverse the list of new link-maps and register any dynamic TLS.
         * This storage is established for any objects not on the primary
         * link-map, and for any objects added to the primary link-map after
         * static TLS has been registered.
         */
        if (nlmp && nlml->lm_tls && ((nlml != &lml_main) ||
            (rtld_flags2 & (RT_FL2_PLMSETUP | RT_FL2_NOPLM)))) {
                Rt_map  *lmp;

                for (lmp = nlmp; lmp; lmp = NEXT_RT_MAP(lmp)) {
                        if (PTTLS(lmp) && PTTLS(lmp)->p_memsz)
                                tls_modaddrem(lmp, TM_FLG_MODADD);
                }
                nlml->lm_tls = 0;
        }

        /*
         * Fire any .init's.
         */
        if (tobj)
                call_init(tobj, DBG_INIT_SORT);
}

/*
 * Append an item to the specified link map control list.
 */
void
lm_append(Lm_list *lml, Aliste lmco, Rt_map *lmp)
{
        Lm_cntl *lmc;
        int     add = 1;

        /*
         * Indicate that this link-map list has a new object.
         */
        (lml->lm_obj)++;

        /*
         * If we're about to add a new object to the main link-map control
         * list, alert the debuggers.  Additions of individual objects to the
         * main link-map control list occur during initial setup as the
         * applications immediate dependencies are loaded.  Additional objects
         * are loaded on the main link-map control list after they have been
         * fully initialized on an alternative link-map control list.  See
         * lm_move().
         */
        if (lmco == ALIST_OFF_DATA)
                rd_event(lml, RD_DLACTIVITY, RT_ADD);

        /* LINTED */
        lmc = (Lm_cntl *)alist_item_by_offset(lml->lm_lists, lmco);

        /*
         * A link-map list header points to one of more link-map control lists
         * (see include/rtld.h).  The initial list, pointed to by lm_cntl, is
         * the list of relocated objects.  Other lists maintain objects that
         * are still being analyzed or relocated.  This list provides the core
         * link-map list information used by all ld.so.1 routines.
         */
        if (lmc->lc_head == NULL) {
                /*
                 * If this is the first link-map for the given control list,
                 * initialize the list.
                 */
                lmc->lc_head = lmc->lc_tail = lmp;
                add = 0;

        } else if (FLAGS(lmp) & FLG_RT_OBJINTPO) {
                Rt_map  *tlmp;

                /*
                 * If this is an interposer then append the link-map following
                 * any other interposers (these are objects that have been
                 * previously preloaded, or were identified with -z interpose).
                 * Interposers can only be inserted on the first link-map
                 * control list, as once relocation has started, interposition
                 * from new interposers can't be guaranteed.
                 *
                 * NOTE: We do not interpose on the head of a list.  This model
                 * evolved because dynamic executables have already been fully
                 * relocated within themselves and thus can't be interposed on.
                 * Nowadays it's possible to have shared objects at the head of
                 * a list, which conceptually means they could be interposed on.
                 * But, shared objects can be created via dldump() and may only
                 * be partially relocated (just relatives), in which case they
                 * are interposable, but are marked as fixed (ET_EXEC).
                 *
                 * Thus we really don't have a clear method of deciding when the
                 * head of a link-map is interposable.  So, to be consistent,
                 * for now only add interposers after the link-map lists head
                 * object.
                 */
                for (tlmp = NEXT_RT_MAP(lmc->lc_head); tlmp;
                    tlmp = NEXT_RT_MAP(tlmp)) {

                        if (FLAGS(tlmp) & FLG_RT_OBJINTPO)
                                continue;

                        /*
                         * Insert the new link-map before this non-interposer,
                         * and indicate an interposer is found.
                         */
                        NEXT(PREV_RT_MAP(tlmp)) = (Link_map *)lmp;
                        PREV(lmp) = PREV(tlmp);

                        NEXT(lmp) = (Link_map *)tlmp;
                        PREV(tlmp) = (Link_map *)lmp;

                        lmc->lc_flags |= LMC_FLG_REANALYZE;
                        add = 0;
                        break;
                }
        }

        /*
         * Fall through to appending the new link map to the tail of the list.
         * If we're processing the initial objects of this link-map list, add
         * them to the backward compatibility list.
         */
        if (add) {
                NEXT(lmc->lc_tail) = (Link_map *)lmp;
                PREV(lmp) = (Link_map *)lmc->lc_tail;
                lmc->lc_tail = lmp;
        }

        /*
         * Having added this link-map to a control list, indicate which control
         * list the link-map belongs to.  Note, control list information is
         * always maintained as an offset, as the Alist can be reallocated.
         */
        CNTL(lmp) = lmco;

        /*
         * Indicate if an interposer is found.  Note that the first object on a
         * link-map can be explicitly defined as an interposer so that it can
         * provide interposition over direct binding requests.
         */
        if (FLAGS(lmp) & MSK_RT_INTPOSE)
                lml->lm_flags |= LML_FLG_INTRPOSE;

        /*
         * For backward compatibility with debuggers, the link-map list contains
         * pointers to the main control list.
         */
        if (lmco == ALIST_OFF_DATA) {
                lml->lm_head = lmc->lc_head;
                lml->lm_tail = lmc->lc_tail;
        }
}

/*
 * Delete an item from the specified link map control list.
 */
void
lm_delete(Lm_list *lml, Rt_map *lmp, Rt_map *clmp)
{
        Lm_cntl *lmc;

        /*
         * If the control list pointer hasn't been initialized, this object
         * never got added to a link-map list.
         */
        if (CNTL(lmp) == 0)
                return;

        /*
         * If we're about to delete an object from the main link-map control
         * list, alert the debuggers.
         */
        if (CNTL(lmp) == ALIST_OFF_DATA)
                rd_event(lml, RD_DLACTIVITY, RT_DELETE);

        /*
         * If we're being audited tell the audit library that we're
         * about to go deleting dependencies.
         */
        if (clmp && (aud_activity ||
            ((LIST(clmp)->lm_tflags | AFLAGS(clmp)) & LML_TFLG_AUD_ACTIVITY)))
                audit_activity(clmp, LA_ACT_DELETE);

        /* LINTED */
        lmc = (Lm_cntl *)alist_item_by_offset(lml->lm_lists, CNTL(lmp));

        if (lmc->lc_head == lmp)
                lmc->lc_head = NEXT_RT_MAP(lmp);
        else
                NEXT(PREV_RT_MAP(lmp)) = (void *)NEXT(lmp);

        if (lmc->lc_tail == lmp)
                lmc->lc_tail = PREV_RT_MAP(lmp);
        else
                PREV(NEXT_RT_MAP(lmp)) = PREV(lmp);

        /*
         * For backward compatibility with debuggers, the link-map list contains
         * pointers to the main control list.
         */
        if (lmc == (Lm_cntl *)&lml->lm_lists->al_data) {
                lml->lm_head = lmc->lc_head;
                lml->lm_tail = lmc->lc_tail;
        }

        /*
         * Indicate we have one less object on this control list.
         */
        (lml->lm_obj)--;
}

/*
 * Move a link-map control list to another.  Objects that are being relocated
 * are maintained on secondary control lists.  Once their relocation is
 * complete, the entire list is appended to the previous control list, as this
 * list must have been the trigger for generating the new control list.
 */
void
lm_move(Lm_list *lml, Aliste nlmco, Aliste plmco, Lm_cntl *nlmc, Lm_cntl *plmc)
{
        Rt_map  *lmp;

        /*
         * If we're about to add a new family of objects to the main link-map
         * control list, alert the debuggers.  Additions of object families to
         * the main link-map control list occur during lazy loading, filtering
         * and dlopen().
         */
        if (plmco == ALIST_OFF_DATA)
                rd_event(lml, RD_DLACTIVITY, RT_ADD);

        DBG_CALL(Dbg_file_cntl(lml, nlmco, plmco));

        /*
         * Indicate each new link-map has been moved to the previous link-map
         * control list.
         */
        for (lmp = nlmc->lc_head; lmp; lmp = NEXT_RT_MAP(lmp)) {
                CNTL(lmp) = plmco;

                /*
                 * If these objects are being added to the main link-map
                 * control list, indicate that there are init's available
                 * for harvesting.
                 */
                if (plmco == ALIST_OFF_DATA) {
                        lml->lm_init++;
                        lml->lm_flags |= LML_FLG_OBJADDED;
                }
        }

        /*
         * Move the new link-map control list, to the callers link-map control
         * list.
         */
        if (plmc->lc_head == NULL) {
                plmc->lc_head = nlmc->lc_head;
                PREV(nlmc->lc_head) = NULL;
        } else {
                NEXT(plmc->lc_tail) = (Link_map *)nlmc->lc_head;
                PREV(nlmc->lc_head) = (Link_map *)plmc->lc_tail;
        }

        plmc->lc_tail = nlmc->lc_tail;
        nlmc->lc_head = nlmc->lc_tail = NULL;

        /*
         * For backward compatibility with debuggers, the link-map list contains
         * pointers to the main control list.
         */
        if (plmco == ALIST_OFF_DATA) {
                lml->lm_head = plmc->lc_head;
                lml->lm_tail = plmc->lc_tail;
        }
}

/*
 * Create, or assign a link-map control list.  Each link-map list contains a
 * main control list, which has an Alist offset of ALIST_OFF_DATA (see the
 * description in include/rtld.h).  During the initial construction of a
 * process, objects are added to this main control list.  This control list is
 * never deleted, unless an alternate link-map list has been requested (say for
 * auditors), and the associated objects could not be loaded or relocated.
 *
 * Once relocation has started, any lazy loadable objects, or filtees, are
 * processed on a new, temporary control list.  Only when these objects have
 * been fully relocated, are they moved to the main link-map control list.
 * Once the objects are moved, this temporary control list is deleted (see
 * remove_cntl()).
 *
 * A dlopen() always requires a new temporary link-map control list.
 * Typically, a dlopen() occurs on a link-map list that had already started
 * relocation, however, auditors can dlopen() objects on the main link-map
 * list while under initial construction, before any relocation has begun.
 * Hence, dlopen() requests are explicitly flagged.
 */
Aliste
create_cntl(Lm_list *lml, int dlopen)
{
        /*
         * If the head link-map object has already been relocated, create a
         * new, temporary, control list.
         */
        if (dlopen || (lml->lm_head == NULL) ||
            (FLAGS(lml->lm_head) & FLG_RT_RELOCED)) {
                Lm_cntl *lmc;

                if ((lmc = alist_append(&lml->lm_lists, NULL, sizeof (Lm_cntl),
                    AL_CNT_LMLISTS)) == NULL)
                        return (NULL);

                return ((Aliste)((char *)lmc - (char *)lml->lm_lists));
        }

        return (ALIST_OFF_DATA);
}

/*
 * Environment variables can have a variety of defined permutations, and thus
 * the following infrastructure exists to allow this variety and to select the
 * required definition.
 *
 * Environment variables can be defined as 32- or 64-bit specific, and if so
 * they will take precedence over any instruction set neutral form.  Typically
 * this is only useful when the environment value is an informational string.
 *
 * Environment variables may be obtained from the standard user environment or
 * from a configuration file.  The latter provides a fallback if no user
 * environment setting is found, and can take two forms:
 *
 *  -   a replaceable definition - this will be used if no user environment
 *      setting has been seen, or
 *
 *  -   an permanent definition - this will be used no matter what user
 *      environment setting is seen.  In the case of list variables it will be
 *      appended to any process environment setting seen.
 *
 * Environment variables can be defined without a value (ie. LD_XXXX=) so as to
 * override any replaceable environment variables from a configuration file.
 */
static  u_longlong_t            rplgen = 0;     /* replaceable generic */
                                                /*      variables */
static  u_longlong_t            rplisa = 0;     /* replaceable ISA specific */
                                                /*      variables */
static  u_longlong_t            prmgen = 0;     /* permanent generic */
                                                /*      variables */
static  u_longlong_t            prmisa = 0;     /* permanent ISA specific */
                                                /*      variables */
static  u_longlong_t            cmdgen = 0;     /* command line (-e) generic */
                                                /*      variables */
static  u_longlong_t            cmdisa = 0;     /* command line (-e) ISA */
                                                /*      specific variables */

/*
 * Classify an environment variables type.
 */
#define ENV_TYP_IGNORE          0x01            /* ignore - variable is for */
                                                /*      the wrong ISA */
#define ENV_TYP_ISA             0x02            /* variable is ISA specific */
#define ENV_TYP_CONFIG          0x04            /* variable obtained from a */
                                                /*      config file */
#define ENV_TYP_PERMANT         0x08            /* variable is permanent */
#define ENV_TYP_CMDLINE         0x10            /* variable provide with -e */
#define ENV_TYP_NULL            0x20            /* variable is null */

/*
 * Identify all environment variables.
 */
#define ENV_FLG_AUDIT           0x0000000000001ULL
#define ENV_FLG_AUDIT_ARGS      0x0000000000002ULL
#define ENV_FLG_BIND_NOW        0x0000000000004ULL
#define ENV_FLG_BIND_NOT        0x0000000000008ULL
#define ENV_FLG_BINDINGS        0x0000000000010ULL
#define ENV_FLG_CONFGEN         0x0000000000020ULL
#define ENV_FLG_CONFIG          0x0000000000040ULL
#define ENV_FLG_DEBUG           0x0000000000080ULL
#define ENV_FLG_DEBUG_OUTPUT    0x0000000000100ULL
#define ENV_FLG_DEMANGLE        0x0000000000200ULL
#define ENV_FLG_FLAGS           0x0000000000400ULL
#define ENV_FLG_INIT            0x0000000000800ULL
#define ENV_FLG_LIBPATH         0x0000000001000ULL
#define ENV_FLG_LOADAVAIL       0x0000000002000ULL
#define ENV_FLG_LOADFLTR        0x0000000004000ULL
#define ENV_FLG_NOAUDIT         0x0000000008000ULL
#define ENV_FLG_NOAUXFLTR       0x0000000010000ULL
#define ENV_FLG_NOBAPLT         0x0000000020000ULL
#define ENV_FLG_NOCONFIG        0x0000000040000ULL
#define ENV_FLG_NODIRCONFIG     0x0000000080000ULL
#define ENV_FLG_NODIRECT        0x0000000100000ULL
#define ENV_FLG_NOENVCONFIG     0x0000000200000ULL
#define ENV_FLG_NOLAZY          0x0000000400000ULL
#define ENV_FLG_NOOBJALTER      0x0000000800000ULL
#define ENV_FLG_NOVERSION       0x0000001000000ULL
#define ENV_FLG_PRELOAD         0x0000002000000ULL
#define ENV_FLG_PROFILE         0x0000004000000ULL
#define ENV_FLG_PROFILE_OUTPUT  0x0000008000000ULL
#define ENV_FLG_SIGNAL          0x0000010000000ULL
#define ENV_FLG_TRACE_OBJS      0x0000020000000ULL
#define ENV_FLG_TRACE_PTHS      0x0000040000000ULL
#define ENV_FLG_UNREF           0x0000080000000ULL
#define ENV_FLG_UNUSED          0x0000100000000ULL
#define ENV_FLG_VERBOSE         0x0000200000000ULL
#define ENV_FLG_WARN            0x0000400000000ULL
#define ENV_FLG_NOFLTCONFIG     0x0000800000000ULL
#define ENV_FLG_BIND_LAZY       0x0001000000000ULL
#define ENV_FLG_NOUNRESWEAK     0x0002000000000ULL
#define ENV_FLG_NOPAREXT        0x0004000000000ULL
#define ENV_FLG_HWCAP           0x0008000000000ULL
#define ENV_FLG_SFCAP           0x0010000000000ULL
#define ENV_FLG_MACHCAP         0x0020000000000ULL
#define ENV_FLG_PLATCAP         0x0040000000000ULL
#define ENV_FLG_CAP_FILES       0x0080000000000ULL
#define ENV_FLG_DEFERRED        0x0100000000000ULL
#define ENV_FLG_NOENVIRON       0x0200000000000ULL

#define SEL_REPLACE             0x0001
#define SEL_PERMANT             0x0002
#define SEL_ACT_RT              0x0100  /* setting rtld_flags */
#define SEL_ACT_RT2             0x0200  /* setting rtld_flags2 */
#define SEL_ACT_STR             0x0400  /* setting string value */
#define SEL_ACT_LML             0x0800  /* setting lml_flags */
#define SEL_ACT_LMLT            0x1000  /* setting lml_tflags */
#define SEL_ACT_SPEC_1          0x2000  /* for FLG_{FLAGS, LIBPATH} */
#define SEL_ACT_SPEC_2          0x4000  /* need special handling */

/*
 * Pattern match an LD_XXXX environment variable.  s1 points to the XXXX part
 * and len specifies its length (comparing a strings length before the string
 * itself speed things up).  s2 points to the token itself which has already
 * had any leading white-space removed.
 */
static void
ld_generic_env(const char *s1, size_t len, const char *s2, Word *lmflags,
    Word *lmtflags, uint_t env_flags, int aout)
{
        u_longlong_t    variable = 0;
        ushort_t        select = 0;
        const char      **str;
        Word            val = 0;

        /*
         * Determine whether we're dealing with a replaceable or permanent
         * string.
         */
        if (env_flags & ENV_TYP_PERMANT) {
                /*
                 * If the string is from a configuration file and defined as
                 * permanent, assign it as permanent.
                 */
                select |= SEL_PERMANT;
        } else
                select |= SEL_REPLACE;

        /*
         * Parse the variable given.
         *
         * The LD_AUDIT family.
         */
        if (*s1 == 'A') {
                if ((len == MSG_LD_AUDIT_SIZE) && (strncmp(s1,
                    MSG_ORIG(MSG_LD_AUDIT), MSG_LD_AUDIT_SIZE) == 0)) {
                        /*
                         * Replaceable and permanent audit objects can exist.
                         */
                        select |= SEL_ACT_STR;
                        str = (select & SEL_REPLACE) ? &rpl_audit : &prm_audit;
                        variable = ENV_FLG_AUDIT;
                } else if ((len == MSG_LD_AUDIT_ARGS_SIZE) &&
                    (strncmp(s1, MSG_ORIG(MSG_LD_AUDIT_ARGS),
                    MSG_LD_AUDIT_ARGS_SIZE) == 0)) {
                        /*
                         * A specialized variable for plt_exit() use, not
                         * documented for general use.
                         */
                        select |= SEL_ACT_SPEC_2;
                        variable = ENV_FLG_AUDIT_ARGS;
                }
        }
        /*
         * The LD_BIND family.
         */
        else if (*s1 == 'B') {
                if ((len == MSG_LD_BIND_LAZY_SIZE) && (strncmp(s1,
                    MSG_ORIG(MSG_LD_BIND_LAZY),
                    MSG_LD_BIND_LAZY_SIZE) == 0)) {
                        select |= SEL_ACT_RT2;
                        val = RT_FL2_BINDLAZY;
                        variable = ENV_FLG_BIND_LAZY;
                } else if ((len == MSG_LD_BIND_NOW_SIZE) && (strncmp(s1,
                    MSG_ORIG(MSG_LD_BIND_NOW), MSG_LD_BIND_NOW_SIZE) == 0)) {
                        select |= SEL_ACT_RT2;
                        val = RT_FL2_BINDNOW;
                        variable = ENV_FLG_BIND_NOW;
                } else if ((len == MSG_LD_BIND_NOT_SIZE) && (strncmp(s1,
                    MSG_ORIG(MSG_LD_BIND_NOT), MSG_LD_BIND_NOT_SIZE) == 0)) {
                        /*
                         * Another trick, enabled to help debug AOUT
                         * applications under BCP, but not documented for
                         * general use.
                         */
                        select |= SEL_ACT_RT;
                        val = RT_FL_NOBIND;
                        variable = ENV_FLG_BIND_NOT;
                } else if ((len == MSG_LD_BINDINGS_SIZE) && (strncmp(s1,
                    MSG_ORIG(MSG_LD_BINDINGS), MSG_LD_BINDINGS_SIZE) == 0)) {
                        /*
                         * This variable is simply for backward compatibility.
                         * If this and LD_DEBUG are both specified, only one of
                         * the strings is going to get processed.
                         */
                        select |= SEL_ACT_SPEC_2;
                        variable = ENV_FLG_BINDINGS;
                }
        }
        /*
         * LD_CAP_FILES and LD_CONFIG family.
         */
        else if (*s1 == 'C') {
                if ((len == MSG_LD_CAP_FILES_SIZE) && (strncmp(s1,
                    MSG_ORIG(MSG_LD_CAP_FILES), MSG_LD_CAP_FILES_SIZE) == 0)) {
                        select |= SEL_ACT_STR;
                        str = (select & SEL_REPLACE) ?
                            &rpl_cap_files : &prm_cap_files;
                        variable = ENV_FLG_CAP_FILES;
                } else if ((len == MSG_LD_CONFGEN_SIZE) && (strncmp(s1,
                    MSG_ORIG(MSG_LD_CONFGEN), MSG_LD_CONFGEN_SIZE) == 0)) {
                        /*
                         * This variable is not documented for general use.
                         * Although originaly designed for internal use with
                         * crle(1), this variable is in use by the Studio
                         * auditing tools.  Hence, it can't be removed.
                         */
                        select |= SEL_ACT_SPEC_2;
                        variable = ENV_FLG_CONFGEN;
                } else if ((len == MSG_LD_CONFIG_SIZE) && (strncmp(s1,
                    MSG_ORIG(MSG_LD_CONFIG), MSG_LD_CONFIG_SIZE) == 0)) {
                        /*
                         * Secure applications must use a default configuration
                         * file.  A setting from a configuration file doesn't
                         * make sense (given we must be reading a configuration
                         * file to have gotten this).
                         */
                        if ((rtld_flags & RT_FL_SECURE) ||
                            (env_flags & ENV_TYP_CONFIG))
                                return;
                        select |= SEL_ACT_STR;
                        str = &config->c_name;
                        variable = ENV_FLG_CONFIG;
                }
        }
        /*
         * The LD_DEBUG family, LD_DEFERRED (internal, used by ldd(1)), and
         * LD_DEMANGLE.
         */
        else if (*s1 == 'D') {
                if ((len == MSG_LD_DEBUG_SIZE) && (strncmp(s1,
                    MSG_ORIG(MSG_LD_DEBUG), MSG_LD_DEBUG_SIZE) == 0)) {
                        select |= SEL_ACT_STR;
                        str = (select & SEL_REPLACE) ? &rpl_debug : &prm_debug;
                        variable = ENV_FLG_DEBUG;
                } else if ((len == MSG_LD_DEBUG_OUTPUT_SIZE) && (strncmp(s1,
                    MSG_ORIG(MSG_LD_DEBUG_OUTPUT),
                    MSG_LD_DEBUG_OUTPUT_SIZE) == 0)) {
                        select |= SEL_ACT_STR;
                        str = &dbg_file;
                        variable = ENV_FLG_DEBUG_OUTPUT;
                } else if ((len == MSG_LD_DEFERRED_SIZE) && (strncmp(s1,
                    MSG_ORIG(MSG_LD_DEFERRED), MSG_LD_DEFERRED_SIZE) == 0)) {
                        select |= SEL_ACT_RT;
                        val = RT_FL_DEFERRED;
                        variable = ENV_FLG_DEFERRED;
                } else if ((len == MSG_LD_DEMANGLE_SIZE) && (strncmp(s1,
                    MSG_ORIG(MSG_LD_DEMANGLE), MSG_LD_DEMANGLE_SIZE) == 0)) {
                        select |= SEL_ACT_RT;
                        val = RT_FL_DEMANGLE;
                        variable = ENV_FLG_DEMANGLE;
                }
        }
        /*
         * LD_FLAGS - collect the best variable definition.  On completion of
         * environment variable processing pass the result to ld_flags_env()
         * where they'll be decomposed and passed back to this routine.
         */
        else if (*s1 == 'F') {
                if ((len == MSG_LD_FLAGS_SIZE) && (strncmp(s1,
                    MSG_ORIG(MSG_LD_FLAGS), MSG_LD_FLAGS_SIZE) == 0)) {
                        select |= SEL_ACT_SPEC_1;
                        str = (select & SEL_REPLACE) ? &rpl_ldflags :
                            &prm_ldflags;
                        variable = ENV_FLG_FLAGS;
                }
        }
        /*
         * LD_HWCAP.
         */
        else if (*s1 == 'H') {
                if ((len == MSG_LD_HWCAP_SIZE) && (strncmp(s1,
                    MSG_ORIG(MSG_LD_HWCAP), MSG_LD_HWCAP_SIZE) == 0)) {
                        select |= SEL_ACT_STR;
                        str = (select & SEL_REPLACE) ?
                            &rpl_hwcap : &prm_hwcap;
                        variable = ENV_FLG_HWCAP;
                }
        }
        /*
         * LD_INIT (internal, used by ldd(1)).
         */
        else if (*s1 == 'I') {
                if ((len == MSG_LD_INIT_SIZE) && (strncmp(s1,
                    MSG_ORIG(MSG_LD_INIT), MSG_LD_INIT_SIZE) == 0)) {
                        select |= SEL_ACT_LML;
                        val = LML_FLG_TRC_INIT;
                        variable = ENV_FLG_INIT;
                }
        }
        /*
         * The LD_LIBRARY_PATH and LD_LOAD families.
         */
        else if (*s1 == 'L') {
                if ((len == MSG_LD_LIBPATH_SIZE) && (strncmp(s1,
                    MSG_ORIG(MSG_LD_LIBPATH), MSG_LD_LIBPATH_SIZE) == 0)) {
                        select |= SEL_ACT_SPEC_1;
                        str = (select & SEL_REPLACE) ? &rpl_libpath :
                            &prm_libpath;
                        variable = ENV_FLG_LIBPATH;
                } else if ((len == MSG_LD_LOADAVAIL_SIZE) && (strncmp(s1,
                    MSG_ORIG(MSG_LD_LOADAVAIL), MSG_LD_LOADAVAIL_SIZE) == 0)) {
                        /*
                         * This variable is not documented for general use.
                         * Although originaly designed for internal use with
                         * crle(1), this variable is in use by the Studio
                         * auditing tools.  Hence, it can't be removed.
                         */
                        select |= SEL_ACT_LML;
                        val = LML_FLG_LOADAVAIL;
                        variable = ENV_FLG_LOADAVAIL;
                } else if ((len == MSG_LD_LOADFLTR_SIZE) && (strncmp(s1,
                    MSG_ORIG(MSG_LD_LOADFLTR), MSG_LD_LOADFLTR_SIZE) == 0)) {
                        select |= SEL_ACT_SPEC_2;
                        variable = ENV_FLG_LOADFLTR;
                }
        }
        /*
         * LD_MACHCAP.
         */
        else if (*s1 == 'M') {
                if ((len == MSG_LD_MACHCAP_SIZE) && (strncmp(s1,
                    MSG_ORIG(MSG_LD_MACHCAP), MSG_LD_MACHCAP_SIZE) == 0)) {
                        select |= SEL_ACT_STR;
                        str = (select & SEL_REPLACE) ?
                            &rpl_machcap : &prm_machcap;
                        variable = ENV_FLG_MACHCAP;
                }
        }
        /*
         * The LD_NO family.
         */
        else if (*s1 == 'N') {
                if ((len == MSG_LD_NOAUDIT_SIZE) && (strncmp(s1,
                    MSG_ORIG(MSG_LD_NOAUDIT), MSG_LD_NOAUDIT_SIZE) == 0)) {
                        select |= SEL_ACT_RT;
                        val = RT_FL_NOAUDIT;
                        variable = ENV_FLG_NOAUDIT;
                } else if ((len == MSG_LD_NOAUXFLTR_SIZE) && (strncmp(s1,
                    MSG_ORIG(MSG_LD_NOAUXFLTR), MSG_LD_NOAUXFLTR_SIZE) == 0)) {
                        select |= SEL_ACT_RT;
                        val = RT_FL_NOAUXFLTR;
                        variable = ENV_FLG_NOAUXFLTR;
                } else if ((len == MSG_LD_NOBAPLT_SIZE) && (strncmp(s1,
                    MSG_ORIG(MSG_LD_NOBAPLT), MSG_LD_NOBAPLT_SIZE) == 0)) {
                        select |= SEL_ACT_RT;
                        val = RT_FL_NOBAPLT;
                        variable = ENV_FLG_NOBAPLT;
                } else if ((len == MSG_LD_NOCONFIG_SIZE) && (strncmp(s1,
                    MSG_ORIG(MSG_LD_NOCONFIG), MSG_LD_NOCONFIG_SIZE) == 0)) {
                        select |= SEL_ACT_RT;
                        val = RT_FL_NOCFG;
                        variable = ENV_FLG_NOCONFIG;
                } else if ((len == MSG_LD_NODIRCONFIG_SIZE) && (strncmp(s1,
                    MSG_ORIG(MSG_LD_NODIRCONFIG),
                    MSG_LD_NODIRCONFIG_SIZE) == 0)) {
                        select |= SEL_ACT_RT;
                        val = RT_FL_NODIRCFG;
                        variable = ENV_FLG_NODIRCONFIG;
                } else if ((len == MSG_LD_NODIRECT_SIZE) && (strncmp(s1,
                    MSG_ORIG(MSG_LD_NODIRECT), MSG_LD_NODIRECT_SIZE) == 0)) {
                        select |= SEL_ACT_LMLT;
                        val = LML_TFLG_NODIRECT;
                        variable = ENV_FLG_NODIRECT;
                } else if ((len == MSG_LD_NOENVCONFIG_SIZE) && (strncmp(s1,
                    MSG_ORIG(MSG_LD_NOENVCONFIG),
                    MSG_LD_NOENVCONFIG_SIZE) == 0)) {
                        select |= SEL_ACT_RT;
                        val = RT_FL_NOENVCFG;
                        variable = ENV_FLG_NOENVCONFIG;
                } else if ((len == MSG_LD_NOFLTCONFIG_SIZE) && (strncmp(s1,
                    MSG_ORIG(MSG_LD_NOFLTCONFIG),
                    MSG_LD_NOFLTCONFIG_SIZE) == 0)) {
                        select |= SEL_ACT_RT2;
                        val = RT_FL2_NOFLTCFG;
                        variable = ENV_FLG_NOFLTCONFIG;
                } else if ((len == MSG_LD_NOLAZY_SIZE) && (strncmp(s1,
                    MSG_ORIG(MSG_LD_NOLAZY), MSG_LD_NOLAZY_SIZE) == 0)) {
                        select |= SEL_ACT_LMLT;
                        val = LML_TFLG_NOLAZYLD;
                        variable = ENV_FLG_NOLAZY;
                } else if ((len == MSG_LD_NOOBJALTER_SIZE) && (strncmp(s1,
                    MSG_ORIG(MSG_LD_NOOBJALTER),
                    MSG_LD_NOOBJALTER_SIZE) == 0)) {
                        select |= SEL_ACT_RT;
                        val = RT_FL_NOOBJALT;
                        variable = ENV_FLG_NOOBJALTER;
                } else if ((len == MSG_LD_NOVERSION_SIZE) && (strncmp(s1,
                    MSG_ORIG(MSG_LD_NOVERSION), MSG_LD_NOVERSION_SIZE) == 0)) {
                        select |= SEL_ACT_RT;
                        val = RT_FL_NOVERSION;
                        variable = ENV_FLG_NOVERSION;
                } else if ((len == MSG_LD_NOUNRESWEAK_SIZE) && (strncmp(s1,
                    MSG_ORIG(MSG_LD_NOUNRESWEAK),
                    MSG_LD_NOUNRESWEAK_SIZE) == 0)) {
                        /*
                         * LD_NOUNRESWEAK (internal, used by ldd(1)).
                         */
                        select |= SEL_ACT_LML;
                        val = LML_FLG_TRC_NOUNRESWEAK;
                        variable = ENV_FLG_NOUNRESWEAK;
                } else if ((len == MSG_LD_NOPAREXT_SIZE) && (strncmp(s1,
                    MSG_ORIG(MSG_LD_NOPAREXT), MSG_LD_NOPAREXT_SIZE) == 0)) {
                        select |= SEL_ACT_LML;
                        val = LML_FLG_TRC_NOPAREXT;
                        variable = ENV_FLG_NOPAREXT;
                } else if ((len == MSG_LD_NOENVIRON_SIZE) && (strncmp(s1,
                    MSG_ORIG(MSG_LD_NOENVIRON), MSG_LD_NOENVIRON_SIZE) == 0)) {
                        /*
                         * LD_NOENVIRON can only be set with ld.so.1 -e.
                         */
                        select |= SEL_ACT_RT;
                        val = RT_FL_NOENVIRON;
                        variable = ENV_FLG_NOENVIRON;
                }
        }
        /*
         * LD_PLATCAP, LD_PRELOAD and LD_PROFILE family.
         */
        else if (*s1 == 'P') {
                if ((len == MSG_LD_PLATCAP_SIZE) && (strncmp(s1,
                    MSG_ORIG(MSG_LD_PLATCAP), MSG_LD_PLATCAP_SIZE) == 0)) {
                        select |= SEL_ACT_STR;
                        str = (select & SEL_REPLACE) ?
                            &rpl_platcap : &prm_platcap;
                        variable = ENV_FLG_PLATCAP;
                } else if ((len == MSG_LD_PRELOAD_SIZE) && (strncmp(s1,
                    MSG_ORIG(MSG_LD_PRELOAD), MSG_LD_PRELOAD_SIZE) == 0)) {
                        select |= SEL_ACT_STR;
                        str = (select & SEL_REPLACE) ? &rpl_preload :
                            &prm_preload;
                        variable = ENV_FLG_PRELOAD;
                } else if ((len == MSG_LD_PROFILE_SIZE) && (strncmp(s1,
                    MSG_ORIG(MSG_LD_PROFILE), MSG_LD_PROFILE_SIZE) == 0)) {
                        /*
                         * Only one user library can be profiled at a time.
                         */
                        select |= SEL_ACT_SPEC_2;
                        variable = ENV_FLG_PROFILE;
                } else if ((len == MSG_LD_PROFILE_OUTPUT_SIZE) && (strncmp(s1,
                    MSG_ORIG(MSG_LD_PROFILE_OUTPUT),
                    MSG_LD_PROFILE_OUTPUT_SIZE) == 0)) {
                        /*
                         * Only one user library can be profiled at a time.
                         */
                        select |= SEL_ACT_STR;
                        str = &profile_out;
                        variable = ENV_FLG_PROFILE_OUTPUT;
                }
        }
        /*
         * LD_SFCAP and LD_SIGNAL.
         */
        else if (*s1 == 'S') {
                if ((len == MSG_LD_SFCAP_SIZE) && (strncmp(s1,
                    MSG_ORIG(MSG_LD_SFCAP), MSG_LD_SFCAP_SIZE) == 0)) {
                        select |= SEL_ACT_STR;
                        str = (select & SEL_REPLACE) ?
                            &rpl_sfcap : &prm_sfcap;
                        variable = ENV_FLG_SFCAP;
                } else if ((len == MSG_LD_SIGNAL_SIZE) &&
                    (strncmp(s1, MSG_ORIG(MSG_LD_SIGNAL),
                    MSG_LD_SIGNAL_SIZE) == 0) &&
                    ((rtld_flags & RT_FL_SECURE) == 0)) {
                        select |= SEL_ACT_SPEC_2;
                        variable = ENV_FLG_SIGNAL;
                }
        }
        /*
         * The LD_TRACE family (internal, used by ldd(1)).  This definition is
         * the key to enabling all other ldd(1) specific environment variables.
         * In case an auditor is called, which in turn might exec(2) a
         * subprocess, this variable is disabled, so that any subprocess
         * escapes ldd(1) processing.
         */
        else if (*s1 == 'T') {
                if (((len == MSG_LD_TRACE_OBJS_SIZE) &&
                    (strncmp(s1, MSG_ORIG(MSG_LD_TRACE_OBJS),
                    MSG_LD_TRACE_OBJS_SIZE) == 0)) ||
                    ((len == MSG_LD_TRACE_OBJS_E_SIZE) &&
                    (((strncmp(s1, MSG_ORIG(MSG_LD_TRACE_OBJS_E),
                    MSG_LD_TRACE_OBJS_E_SIZE) == 0) && !aout) ||
                    ((strncmp(s1, MSG_ORIG(MSG_LD_TRACE_OBJS_A),
                    MSG_LD_TRACE_OBJS_A_SIZE) == 0) && aout)))) {
                        char    *s0 = (char *)s1;

                        select |= SEL_ACT_SPEC_2;
                        variable = ENV_FLG_TRACE_OBJS;

#if     defined(__sparc) || defined(__x86)
                        /*
                         * The simplest way to "disable" this variable is to
                         * truncate this string to "LD_'\0'". This string is
                         * ignored by any ld.so.1 environment processing.
                         * Use of such interfaces as unsetenv(3c) are overkill,
                         * and would drag too much libc implementation detail
                         * into ld.so.1.
                         */
                        *s0 = '\0';
#else
/*
 * Verify that the above write is appropriate for any new platforms.
 */
#error  unsupported architecture!
#endif
                } else if ((len == MSG_LD_TRACE_PTHS_SIZE) && (strncmp(s1,
                    MSG_ORIG(MSG_LD_TRACE_PTHS),
                    MSG_LD_TRACE_PTHS_SIZE) == 0)) {
                        select |= SEL_ACT_LML;
                        val = LML_FLG_TRC_SEARCH;
                        variable = ENV_FLG_TRACE_PTHS;
                }
        }
        /*
         * LD_UNREF and LD_UNUSED (internal, used by ldd(1)).
         */
        else if (*s1 == 'U') {
                if ((len == MSG_LD_UNREF_SIZE) && (strncmp(s1,
                    MSG_ORIG(MSG_LD_UNREF), MSG_LD_UNREF_SIZE) == 0)) {
                        select |= SEL_ACT_LML;
                        val = LML_FLG_TRC_UNREF;
                        variable = ENV_FLG_UNREF;
                } else if ((len == MSG_LD_UNUSED_SIZE) && (strncmp(s1,
                    MSG_ORIG(MSG_LD_UNUSED), MSG_LD_UNUSED_SIZE) == 0)) {
                        select |= SEL_ACT_LML;
                        val = LML_FLG_TRC_UNUSED;
                        variable = ENV_FLG_UNUSED;
                }
        }
        /*
         * LD_VERBOSE (internal, used by ldd(1)).
         */
        else if (*s1 == 'V') {
                if ((len == MSG_LD_VERBOSE_SIZE) && (strncmp(s1,
                    MSG_ORIG(MSG_LD_VERBOSE), MSG_LD_VERBOSE_SIZE) == 0)) {
                        select |= SEL_ACT_LML;
                        val = LML_FLG_TRC_VERBOSE;
                        variable = ENV_FLG_VERBOSE;
                }
        }
        /*
         * LD_WARN (internal, used by ldd(1)).
         */
        else if (*s1 == 'W') {
                if ((len == MSG_LD_WARN_SIZE) && (strncmp(s1,
                    MSG_ORIG(MSG_LD_WARN), MSG_LD_WARN_SIZE) == 0)) {
                        select |= SEL_ACT_LML;
                        val = LML_FLG_TRC_WARN;
                        variable = ENV_FLG_WARN;
                }
        }

        if (variable == 0)
                return;

        /*
         * If the variable is already processed with and ISA specific variable,
         * no further processing is needed.
         */
        if (((select & SEL_REPLACE) && (rplisa & variable)) ||
            ((select & SEL_PERMANT) && (prmisa & variable)))
                return;

        /*
         * If this variable has already been set via the command line, then
         * ignore this variable.  The command line, -e, takes precedence.
         */
        if (env_flags & ENV_TYP_ISA) {
                if (cmdisa & variable)
                        return;
                if (env_flags & ENV_TYP_CMDLINE)
                        cmdisa |= variable;
        } else {
                if (cmdgen & variable)
                        return;
                if (env_flags & ENV_TYP_CMDLINE)
                        cmdgen |= variable;
        }

        /*
         * Mark the appropriate variables.
         */
        if (env_flags & ENV_TYP_ISA) {
                /*
                 * This is an ISA setting.
                 */
                if (select & SEL_REPLACE) {
                        if (rplisa & variable)
                                return;
                        rplisa |= variable;
                } else {
                        prmisa |= variable;
                }
        } else {
                /*
                 * This is a non-ISA setting.
                 */
                if (select & SEL_REPLACE) {
                        if (rplgen & variable)
                                return;
                        rplgen |= variable;
                } else
                        prmgen |= variable;
        }

        /*
         * Now perform the setting.
         */
        if (select & SEL_ACT_RT) {
                if (s2)
                        rtld_flags |= val;
                else
                        rtld_flags &= ~val;
        } else if (select & SEL_ACT_RT2) {
                if (s2)
                        rtld_flags2 |= val;
                else
                        rtld_flags2 &= ~val;
        } else if (select & SEL_ACT_STR) {
                if (env_flags & ENV_TYP_NULL)
                        *str = NULL;
                else
                        *str = s2;
        } else if (select & SEL_ACT_LML) {
                if (s2)
                        *lmflags |= val;
                else
                        *lmflags &= ~val;
        } else if (select & SEL_ACT_LMLT) {
                if (s2)
                        *lmtflags |= val;
                else
                        *lmtflags &= ~val;
        } else if (select & SEL_ACT_SPEC_1) {
                /*
                 * variable is either ENV_FLG_FLAGS or ENV_FLG_LIBPATH
                 */
                if (env_flags & ENV_TYP_NULL)
                        *str = NULL;
                else
                        *str = s2;
                if ((select & SEL_REPLACE) && (env_flags & ENV_TYP_CONFIG)) {
                        if (s2) {
                                if (variable == ENV_FLG_FLAGS)
                                        env_info |= ENV_INF_FLAGCFG;
                                else
                                        env_info |= ENV_INF_PATHCFG;
                        } else {
                                if (variable == ENV_FLG_FLAGS)
                                        env_info &= ~ENV_INF_FLAGCFG;
                                else
                                        env_info &= ~ENV_INF_PATHCFG;
                        }
                }
        } else if (select & SEL_ACT_SPEC_2) {
                /*
                 * variables can be: ENV_FLG_
                 *      AUDIT_ARGS, BINDING, CONFGEN, LOADFLTR, PROFILE,
                 *      SIGNAL, TRACE_OBJS
                 */
                switch (variable) {
                case ENV_FLG_AUDIT_ARGS:
                        if (s2) {
                                audit_argcnt = atoi(s2);
                                audit_argcnt += audit_argcnt % 2;
                        } else
                                audit_argcnt = 0;
                        break;
                case ENV_FLG_BINDINGS:
                        if (s2)
                                rpl_debug = MSG_ORIG(MSG_TKN_BINDINGS);
                        else
                                rpl_debug = NULL;
                        break;
                case ENV_FLG_CONFGEN:
                        if (s2) {
                                rtld_flags |= RT_FL_CONFGEN;
                                *lmflags |= LML_FLG_IGNRELERR;
                        } else {
                                rtld_flags &= ~RT_FL_CONFGEN;
                                *lmflags &= ~LML_FLG_IGNRELERR;
                        }
                        break;
                case ENV_FLG_LOADFLTR:
                        if (s2) {
                                *lmtflags |= LML_TFLG_LOADFLTR;
                                if (*s2 == '2')
                                        rtld_flags |= RT_FL_WARNFLTR;
                        } else {
                                *lmtflags &= ~LML_TFLG_LOADFLTR;
                                rtld_flags &= ~RT_FL_WARNFLTR;
                        }
                        break;
                case ENV_FLG_PROFILE:
                        profile_name = s2;
                        if (s2) {
                                if (strcmp(s2, MSG_ORIG(MSG_FIL_RTLD)) == 0) {
                                        return;
                                }
                                /* BEGIN CSTYLED */
                                if (rtld_flags & RT_FL_SECURE) {
                                        profile_lib =
#if     defined(_ELF64)
                                            MSG_ORIG(MSG_PTH_LDPROFSE_64);
#else
                                            MSG_ORIG(MSG_PTH_LDPROFSE);
#endif
                                } else {
                                        profile_lib =
#if     defined(_ELF64)
                                            MSG_ORIG(MSG_PTH_LDPROF_64);
#else
                                            MSG_ORIG(MSG_PTH_LDPROF);
#endif
                                }
                                /* END CSTYLED */
                        } else
                                profile_lib = NULL;
                        break;
                case ENV_FLG_SIGNAL:
                        killsig = s2 ? atoi(s2) : SIGKILL;
                        break;
                case ENV_FLG_TRACE_OBJS:
                        if (s2) {
                                *lmflags |= LML_FLG_TRC_ENABLE;
                                if (*s2 == '2')
                                        *lmflags |= LML_FLG_TRC_LDDSTUB;
                        } else
                                *lmflags &=
                                    ~(LML_FLG_TRC_ENABLE | LML_FLG_TRC_LDDSTUB);
                        break;
                }
        }
}

/*
 * Determine whether we have an architecture specific environment variable.
 * If we do, and we're the wrong architecture, it'll just get ignored.
 * Otherwise the variable is processed in it's architecture neutral form.
 */
static int
ld_arch_env(const char *s1, size_t *len)
{
        size_t  _len = *len - 3;

        if (s1[_len++] == '_') {
                if ((s1[_len] == '3') && (s1[_len + 1] == '2')) {
#if     defined(_ELF64)
                        return (ENV_TYP_IGNORE);
#else
                        *len = *len - 3;
                        return (ENV_TYP_ISA);
#endif
                }
                if ((s1[_len] == '6') && (s1[_len + 1] == '4')) {
#if     defined(_ELF64)
                        *len = *len - 3;
                        return (ENV_TYP_ISA);
#else
                        return (ENV_TYP_IGNORE);
#endif
                }
        }
        return (0);
}

/*
 * Process an LD_FLAGS environment variable.  The value can be a comma
 * separated set of tokens, which are sent (in upper case) into the generic
 * LD_XXXX environment variable engine.  For example:
 *
 *      LD_FLAGS=bind_now=              ->      LD_BIND_NOW=
 *      LD_FLAGS=bind_now               ->      LD_BIND_NOW=1
 *      LD_FLAGS=library_path=          ->      LD_LIBRARY_PATH=
 *      LD_FLAGS=library_path=/foo:.    ->      LD_LIBRARY_PATH=/foo:.
 *      LD_FLAGS=debug=files:detail     ->      LD_DEBUG=files:detail
 * or
 *      LD_FLAGS=bind_now,library_path=/foo:.,debug=files:detail
 */
static int
ld_flags_env(const char *str, Word *lmflags, Word *lmtflags,
    uint_t env_flags, int aout)
{
        char    *nstr, *sstr, *estr = NULL;
        size_t  nlen, len;

        if (str == NULL)
                return (0);

        /*
         * Create a new string as we're going to transform the token(s) into
         * uppercase and separate tokens with nulls.
         */
        len = strlen(str);
        if ((nstr = malloc(len + 1)) == NULL)
                return (1);
        (void) strcpy(nstr, str);

        for (sstr = nstr; sstr; sstr++, len--) {
                int     flags = 0;

                if ((*sstr != '\0') && (*sstr != ',')) {
                        if (estr == NULL) {
                                if (*sstr == '=')
                                        estr = sstr;
                                else {
                                        /*
                                         * Translate token to uppercase.  Don't
                                         * use toupper(3C) as including this
                                         * code doubles the size of ld.so.1.
                                         */
                                        if ((*sstr >= 'a') && (*sstr <= 'z'))
                                                *sstr = *sstr - ('a' - 'A');
                                }
                        }
                        continue;
                }

                *sstr = '\0';

                /*
                 * Have we discovered an "=" string.
                 */
                if (estr) {
                        nlen = estr - nstr;

                        /*
                         * If this is an unqualified "=", then this variable
                         * is intended to ensure a feature is disabled.
                         */
                        if ((*++estr == '\0') || (*estr == ','))
                                estr = NULL;
                } else {
                        nlen = sstr - nstr;

                        /*
                         * If there is no "=" found, fabricate a boolean
                         * definition for any unqualified variable.  Thus,
                         * LD_FLAGS=bind_now is represented as BIND_NOW=1.
                         * The value "1" is sufficient to assert any boolean
                         * variables.  Setting of ENV_TYP_NULL ensures any
                         * string usage is reset to a NULL string, thus
                         * LD_FLAGS=library_path is equivalent to
                         * LIBRARY_PATH='\0'.
                         */
                        flags |= ENV_TYP_NULL;
                        estr = (char *)MSG_ORIG(MSG_STR_ONE);
                }

                /*
                 * Determine whether the environment variable is 32- or 64-bit
                 * specific.  The length, len, will reflect the architecture
                 * neutral portion of the string.
                 */
                if ((flags |= ld_arch_env(nstr, &nlen)) != ENV_TYP_IGNORE) {
                        ld_generic_env(nstr, nlen, estr, lmflags,
                            lmtflags, (env_flags | flags), aout);
                }
                if (len == 0)
                        break;

                nstr = sstr + 1;
                estr = NULL;
        }

        return (0);
}

/*
 * Variant of getopt(), intended for use when ld.so.1 is invoked directly
 * from the command line.  The only command line option allowed is -e followed
 * by a runtime linker environment variable.
 */
int
rtld_getopt(char **argv, char ***envp, auxv_t **auxv, Word *lmflags,
    Word *lmtflags, int aout)
{
        int     ndx;

        for (ndx = 1; argv[ndx]; ndx++) {
                char    *str;

                if (argv[ndx][0] != '-')
                        break;

                if (argv[ndx][1] == '\0') {
                        ndx++;
                        break;
                }

                if (argv[ndx][1] != 'e')
                        return (1);

                if (argv[ndx][2] == '\0') {
                        ndx++;
                        if (argv[ndx] == NULL)
                                return (1);
                        str = argv[ndx];
                } else
                        str = &argv[ndx][2];

                /*
                 * If the environment variable starts with LD_, strip the LD_.
                 * Otherwise, take things as is.  Indicate that this variable
                 * originates from the command line, as these variables take
                 * precedence over any environment variables, or configuration
                 * file variables.
                 */
                if ((str[0] == 'L') && (str[1] == 'D') && (str[2] == '_') &&
                    (str[3] != '\0'))
                        str += 3;
                if (ld_flags_env(str, lmflags, lmtflags,
                    ENV_TYP_CMDLINE, aout) == 1)
                        return (1);
        }

        /*
         * Make sure an object file has been specified.
         */
        if (argv[ndx] == NULL)
                return (1);

        /*
         * Having gotten the arguments, clean ourselves off of the stack.
         * This results in a process that looks as if it was executed directly
         * from the application.
         */
        stack_cleanup(argv, envp, auxv, ndx);
        return (0);
}

/*
 * Process a single LD_XXXX string.
 */
static void
ld_str_env(const char *s1, Word *lmflags, Word *lmtflags, uint_t env_flags,
    int aout)
{
        const char      *s2;
        size_t          len;
        int             flags;

        /*
         * In a branded process we must ignore all LD_XXXX variables because
         * they are intended for the brand's linker.  To affect the native
         * linker, use LD_BRAND_XXXX instead.
         */
        if (rtld_flags2 & RT_FL2_BRANDED) {
                if (strncmp(s1, MSG_ORIG(MSG_LD_BRAND_PREFIX),
                    MSG_LD_BRAND_PREFIX_SIZE) != 0)
                        return;
                s1 += MSG_LD_BRAND_PREFIX_SIZE;
        }

        /*
         * Variables with no value (ie. LD_XXXX=) turn a capability off.
         */
        if ((s2 = strchr(s1, '=')) == NULL) {
                len = strlen(s1);
                s2 = NULL;
        } else if (*++s2 == '\0') {
                len = strlen(s1) - 1;
                s2 = NULL;
        } else {
                len = s2 - s1 - 1;
                while (conv_strproc_isspace(*s2))
                        s2++;
        }

        /*
         * Determine whether the environment variable is 32-bit or 64-bit
         * specific.  The length, len, will reflect the architecture neutral
         * portion of the string.
         */
        if ((flags = ld_arch_env(s1, &len)) == ENV_TYP_IGNORE)
                return;
        env_flags |= flags;

        ld_generic_env(s1, len, s2, lmflags, lmtflags, env_flags, aout);
}

/*
 * Internal getenv routine.  Called immediately after ld.so.1 initializes
 * itself to process any locale specific environment variables, and collect
 * any LD_XXXX variables for later processing.
 */
#define LOC_LANG        1
#define LOC_MESG        2
#define LOC_ALL         3

int
readenv_user(const char **envp, APlist **ealpp)
{
        char            *locale;
        const char      *s1;
        int             loc = 0;

        for (s1 = *envp; s1; envp++, s1 = *envp) {
                const char      *s2;

                if (*s1++ != 'L')
                        continue;

                /*
                 * See if we have any locale environment settings.  These
                 * environment variables have a precedence, LC_ALL is higher
                 * than LC_MESSAGES which is higher than LANG.
                 */
                s2 = s1;
                if ((*s2++ == 'C') && (*s2++ == '_') && (*s2 != '\0')) {
                        if (strncmp(s2, MSG_ORIG(MSG_LC_ALL),
                            MSG_LC_ALL_SIZE) == 0) {
                                s2 += MSG_LC_ALL_SIZE;
                                if ((*s2 != '\0') && (loc < LOC_ALL)) {
                                        glcs[CI_LCMESSAGES].lc_un.lc_ptr =
                                            (char *)s2;
                                        loc = LOC_ALL;
                                }
                        } else if (strncmp(s2, MSG_ORIG(MSG_LC_MESSAGES),
                            MSG_LC_MESSAGES_SIZE) == 0) {
                                s2 += MSG_LC_MESSAGES_SIZE;
                                if ((*s2 != '\0') && (loc < LOC_MESG)) {
                                        glcs[CI_LCMESSAGES].lc_un.lc_ptr =
                                            (char *)s2;
                                        loc = LOC_MESG;
                                }
                        }
                        continue;
                }

                s2 = s1;
                if ((*s2++ == 'A') && (*s2++ == 'N') && (*s2++ == 'G') &&
                    (*s2++ == '=') && (*s2 != '\0') && (loc < LOC_LANG)) {
                        glcs[CI_LCMESSAGES].lc_un.lc_ptr = (char *)s2;
                        loc = LOC_LANG;
                        continue;
                }

                /*
                 * Pick off any LD_XXXX environment variables.
                 */
                if ((*s1++ == 'D') && (*s1++ == '_') && (*s1 != '\0')) {
                        if (aplist_append(ealpp, s1, AL_CNT_ENVIRON) == NULL)
                                return (1);
                }
        }

        /*
         * If we have a locale setting make sure it's worth processing further.
         * C and POSIX locales don't need any processing.  In addition, to
         * ensure no one escapes the /usr/lib/locale hierarchy, don't allow
         * the locale to contain a segment that leads upward in the file system
         * hierarchy (i.e. no '..' segments).   Given that we'll be confined to
         * the /usr/lib/locale hierarchy, there is no need to extensively
         * validate the mode or ownership of any message file (as libc's
         * generic handling of message files does), or be concerned with
         * symbolic links that might otherwise send us elsewhere.  Duplicate
         * the string so that new locale setting can generically cleanup any
         * previous locales.
         */
        if ((locale = glcs[CI_LCMESSAGES].lc_un.lc_ptr) != NULL) {
                if (((*locale == 'C') && (*(locale + 1) == '\0')) ||
                    (strcmp(locale, MSG_ORIG(MSG_TKN_POSIX)) == 0) ||
                    (strstr(locale, MSG_ORIG(MSG_TKN_DOTDOT)) != NULL))
                        glcs[CI_LCMESSAGES].lc_un.lc_ptr = NULL;
                else
                        glcs[CI_LCMESSAGES].lc_un.lc_ptr = strdup(locale);
        }
        return (0);
}

/*
 * Process any LD_XXXX environment variables collected by readenv_user().
 */
int
procenv_user(APlist *ealp, Word *lmflags, Word *lmtflags, int aout)
{
        Aliste          idx;
        const char      *s1;

        for (APLIST_TRAVERSE(ealp, idx, s1))
                ld_str_env(s1, lmflags, lmtflags, 0, aout);

        /*
         * Having collected the best representation of any LD_FLAGS, process
         * these strings.
         */
        if (rpl_ldflags) {
                if (ld_flags_env(rpl_ldflags, lmflags, lmtflags, 0, aout) == 1)
                        return (1);
                rpl_ldflags = NULL;
        }

        /*
         * Don't allow environment controlled auditing when tracing or if
         * explicitly disabled.  Trigger all tracing modes from
         * LML_FLG_TRC_ENABLE.
         */
        if ((*lmflags & LML_FLG_TRC_ENABLE) || (rtld_flags & RT_FL_NOAUDIT))
                rpl_audit = profile_lib = profile_name = NULL;
        if ((*lmflags & LML_FLG_TRC_ENABLE) == 0)
                *lmflags &= ~LML_MSK_TRC;

        /*
         * If both LD_BIND_NOW and LD_BIND_LAZY are specified, the former wins.
         */
        if ((rtld_flags2 & (RT_FL2_BINDNOW | RT_FL2_BINDLAZY)) ==
            (RT_FL2_BINDNOW | RT_FL2_BINDLAZY))
                rtld_flags2 &= ~RT_FL2_BINDLAZY;

        /*
         * When using ldd(1) -r or -d against an executable, assert -p.
         */
        if ((*lmflags &
            (LML_FLG_TRC_WARN | LML_FLG_TRC_LDDSTUB)) == LML_FLG_TRC_WARN)
                *lmflags |= LML_FLG_TRC_NOPAREXT;

        return (0);
}

/*
 * Configuration environment processing.  Called after the a.out has been
 * processed (as the a.out can specify its own configuration file).
 */
int
readenv_config(Rtc_env * envtbl, Addr addr, int aout)
{
        Word            *lmflags = &(lml_main.lm_flags);
        Word            *lmtflags = &(lml_main.lm_tflags);

        if (envtbl == NULL)
                return (0);

        while (envtbl->env_str) {
                uint_t          env_flags = ENV_TYP_CONFIG;
                const char      *s1 = (const char *)(envtbl->env_str + addr);

                if (envtbl->env_flags & RTC_ENV_PERMANT)
                        env_flags |= ENV_TYP_PERMANT;

                if ((*s1++ == 'L') && (*s1++ == 'D') &&
                    (*s1++ == '_') && (*s1 != '\0'))
                        ld_str_env(s1, lmflags, lmtflags, env_flags, 0);

                envtbl++;
        }

        /*
         * Having collected the best representation of any LD_FLAGS, process
         * these strings.
         */
        if (ld_flags_env(rpl_ldflags, lmflags, lmtflags, 0, aout) == 1)
                return (1);
        if (ld_flags_env(prm_ldflags, lmflags, lmtflags, ENV_TYP_CONFIG,
            aout) == 1)
                return (1);

        /*
         * Don't allow environment controlled auditing when tracing or if
         * explicitly disabled.  Trigger all tracing modes from
         * LML_FLG_TRC_ENABLE.
         */
        if ((*lmflags & LML_FLG_TRC_ENABLE) || (rtld_flags & RT_FL_NOAUDIT))
                prm_audit = profile_lib = profile_name = NULL;
        if ((*lmflags & LML_FLG_TRC_ENABLE) == 0)
                *lmflags &= ~LML_MSK_TRC;

        return (0);
}

int
dowrite(Prfbuf * prf)
{
        /*
         * We do not have a valid file descriptor, so we are unable
         * to flush the buffer.
         */
        if (prf->pr_fd == -1)
                return (0);
        (void) write(prf->pr_fd, prf->pr_buf, prf->pr_cur - prf->pr_buf);
        prf->pr_cur = prf->pr_buf;
        return (1);
}

/*
 * Simplified printing.  The following conversion specifications are supported:
 *
 *      % [#] [-] [min field width] [. precision] s|d|x|c
 *
 *
 * dorprf takes the output buffer in the form of Prfbuf which permits
 * the verification of the output buffer size and the concatenation
 * of data to an already existing output buffer.  The Prfbuf
 * structure contains the following:
 *
 *  pr_buf      pointer to the beginning of the output buffer.
 *  pr_cur      pointer to the next available byte in the output buffer.  By
 *              setting pr_cur ahead of pr_buf you can append to an already
 *              existing buffer.
 *  pr_len      the size of the output buffer.  By setting pr_len to '0' you
 *              disable protection from overflows in the output buffer.
 *  pr_fd       a pointer to the file-descriptor the buffer will eventually be
 *              output to.  If pr_fd is set to '-1' then it's assumed there is
 *              no output buffer, and doprf() will return with an error to
 *              indicate an output buffer overflow.  If pr_fd is > -1 then when
 *              the output buffer is filled it will be flushed to pr_fd and will
 *              then be available for additional data.
 */
#define FLG_UT_MINUS    0x0001  /* - */
#define FLG_UT_SHARP    0x0002  /* # */
#define FLG_UT_DOTSEEN  0x0008  /* dot appeared in format spec */

/*
 * This macro is for use from within doprf only.  It is to be used for checking
 * the output buffer size and placing characters into the buffer.
 */
#define PUTC(c) \
        { \
                char tmpc; \
                \
                tmpc = (c); \
                if (bufsiz && (bp >= bufend)) { \
                        prf->pr_cur = bp; \
                        if (dowrite(prf) == 0) \
                                return (0); \
                        bp = prf->pr_cur; \
                } \
                *bp++ = tmpc; \
        }

/*
 * Define a local buffer size for building a numeric value - large enough to
 * hold a 64-bit value.
 */
#define NUM_SIZE        22

size_t
doprf(const char *format, va_list args, Prfbuf *prf)
{
        char    c;
        char    *bp = prf->pr_cur;
        char    *bufend = prf->pr_buf + prf->pr_len;
        size_t  bufsiz = prf->pr_len;

        while ((c = *format++) != '\0') {
                if (c != '%') {
                        PUTC(c);
                } else {
                        int     base = 0, flag = 0, width = 0, prec = 0;
                        size_t  _i;
                        int     _c, _n;
                        char    *_s;
                        int     ls = 0;
again:
                        c = *format++;
                        switch (c) {
                        case '-':
                                flag |= FLG_UT_MINUS;
                                goto again;
                        case '#':
                                flag |= FLG_UT_SHARP;
                                goto again;
                        case '.':
                                flag |= FLG_UT_DOTSEEN;
                                goto again;
                        case '0':
                        case '1':
                        case '2':
                        case '3':
                        case '4':
                        case '5':
                        case '6':
                        case '7':
                        case '8':
                        case '9':
                                if (flag & FLG_UT_DOTSEEN)
                                        prec = (prec * 10) + c - '0';
                                else
                                        width = (width * 10) + c - '0';
                                goto again;
                        case 'x':
                        case 'X':
                                base = 16;
                                break;
                        case 'd':
                        case 'D':
                        case 'u':
                                base = 10;
                                flag &= ~FLG_UT_SHARP;
                                break;
                        case 'l':
                                base = 10;
                                ls++; /* number of l's (long or long long) */
                                if ((*format == 'l') ||
                                    (*format == 'd') || (*format == 'D') ||
                                    (*format == 'x') || (*format == 'X') ||
                                    (*format == 'o') || (*format == 'O') ||
                                    (*format == 'u') || (*format == 'U'))
                                        goto again;
                                break;
                        case 'o':
                        case 'O':
                                base = 8;
                                break;
                        case 'c':
                                _c = va_arg(args, int);

                                for (_i = 24; _i > 0; _i -= 8) {
                                        if ((c = ((_c >> _i) & 0x7f)) != 0) {
                                                PUTC(c);
                                        }
                                }
                                if ((c = ((_c >> _i) & 0x7f)) != 0) {
                                        PUTC(c);
                                }
                                break;
                        case 's':
                                _s = va_arg(args, char *);
                                _i = strlen(_s);
                                /* LINTED */
                                _n = (int)(width - _i);
                                if (!prec)
                                        /* LINTED */
                                        prec = (int)_i;

                                if (width && !(flag & FLG_UT_MINUS)) {
                                        while (_n-- > 0)
                                                PUTC(' ');
                                }
                                while (((c = *_s++) != 0) && prec--) {
                                        PUTC(c);
                                }
                                if (width && (flag & FLG_UT_MINUS)) {
                                        while (_n-- > 0)
                                                PUTC(' ');
                                }
                                break;
                        case '%':
                                PUTC('%');
                                break;
                        default:
                                break;
                        }

                        /*
                         * Numeric processing
                         */
                        if (base) {
                                char            local[NUM_SIZE];
                                size_t          ssize = 0, psize = 0;
                                const char      *string =
                                    MSG_ORIG(MSG_STR_HEXNUM);
                                const char      *prefix =
                                    MSG_ORIG(MSG_STR_EMPTY);
                                u_longlong_t    num;

                                switch (ls) {
                                case 0: /* int */
                                        num = (u_longlong_t)
                                            va_arg(args, uint_t);
                                        break;
                                case 1: /* long */
                                        num = (u_longlong_t)
                                            va_arg(args, ulong_t);
                                        break;
                                case 2: /* long long */
                                        num = va_arg(args, u_longlong_t);
                                        break;
                                }

                                if (flag & FLG_UT_SHARP) {
                                        if (base == 16) {
                                                prefix = MSG_ORIG(MSG_STR_HEX);
                                                psize = 2;
                                        } else {
                                                prefix = MSG_ORIG(MSG_STR_ZERO);
                                                psize = 1;
                                        }
                                }
                                if ((base == 10) && (long)num < 0) {
                                        prefix = MSG_ORIG(MSG_STR_NEGATE);
                                        psize = MSG_STR_NEGATE_SIZE;
                                        num = (u_longlong_t)(-(longlong_t)num);
                                }

                                /*
                                 * Convert the numeric value into a local
                                 * string (stored in reverse order).
                                 */
                                _s = local;
                                do {
                                        *_s++ = string[num % base];
                                        num /= base;
                                        ssize++;
                                } while (num);

                                ASSERT(ssize < sizeof (local));

                                /*
                                 * Provide any precision or width padding.
                                 */
                                if (prec) {
                                        /* LINTED */
                                        _n = (int)(prec - ssize);
                                        while ((_n-- > 0) &&
                                            (ssize < sizeof (local))) {
                                                *_s++ = '0';
                                                ssize++;
                                        }
                                }
                                if (width && !(flag & FLG_UT_MINUS)) {
                                        /* LINTED */
                                        _n = (int)(width - ssize - psize);
                                        while (_n-- > 0) {
                                                PUTC(' ');
                                        }
                                }

                                /*
                                 * Print any prefix and the numeric string
                                 */
                                while (*prefix)
                                        PUTC(*prefix++);
                                do {
                                        PUTC(*--_s);
                                } while (_s > local);

                                /*
                                 * Provide any width padding.
                                 */
                                if (width && (flag & FLG_UT_MINUS)) {
                                        /* LINTED */
                                        _n = (int)(width - ssize - psize);
                                        while (_n-- > 0)
                                                PUTC(' ');
                                }
                        }
                }
        }

        PUTC('\0');
        prf->pr_cur = bp;
        return (1);
}

static int
doprintf(const char *format, va_list args, Prfbuf *prf)
{
        char    *ocur = prf->pr_cur;

        if (doprf(format, args, prf) == 0)
                return (0);
        /* LINTED */
        return ((int)(prf->pr_cur - ocur));
}

/* VARARGS2 */
int
sprintf(char *buf, const char *format, ...)
{
        va_list args;
        int     len;
        Prfbuf  prf;

        va_start(args, format);
        prf.pr_buf = prf.pr_cur = buf;
        prf.pr_len = 0;
        prf.pr_fd = -1;
        len = doprintf(format, args, &prf);
        va_end(args);

        /*
         * sprintf() return value excludes the terminating null byte.
         */
        return (len - 1);
}

/* VARARGS3 */
int
snprintf(char *buf, size_t n, const char *format, ...)
{
        va_list args;
        int     len;
        Prfbuf  prf;

        va_start(args, format);
        prf.pr_buf = prf.pr_cur = buf;
        prf.pr_len = n;
        prf.pr_fd = -1;
        len = doprintf(format, args, &prf);
        va_end(args);

        return (len);
}

/* VARARGS2 */
int
bufprint(Prfbuf *prf, const char *format, ...)
{
        va_list args;
        int     len;

        va_start(args, format);
        len = doprintf(format, args, prf);
        va_end(args);

        return (len);
}

/*PRINTFLIKE1*/
int
printf(const char *format, ...)
{
        va_list args;
        char    buffer[ERRSIZE];
        Prfbuf  prf;

        va_start(args, format);
        prf.pr_buf = prf.pr_cur = buffer;
        prf.pr_len = ERRSIZE;
        prf.pr_fd = 1;
        (void) doprf(format, args, &prf);
        va_end(args);
        /*
         * Trim trailing '\0' form buffer
         */
        prf.pr_cur--;
        return (dowrite(&prf));
}

static char     errbuf[ERRSIZE], *nextptr = errbuf, *prevptr = NULL;

/*
 * All error messages go through eprintf().  During process initialization,
 * these messages are directed to the standard error, however once control has
 * been passed to the applications code these messages are stored in an internal
 * buffer for use with dlerror().  Note, fatal error conditions that may occur
 * while running the application will still cause a standard error message, see
 * rtldexit() in this file for details.
 * The RT_FL_APPLIC flag serves to indicate the transition between process
 * initialization and when the applications code is running.
 */
void
veprintf(Lm_list *lml, Error error, const char *format, va_list args)
{
        int             overflow = 0;
        static int      lock = 0;
        Prfbuf          prf;

        if (lock || (nextptr == (errbuf + ERRSIZE)))
                return;

        /*
         * Note: this lock is here to prevent the same thread from recursively
         * entering itself during a eprintf.  ie: during eprintf malloc() fails
         * and we try and call eprintf ... and then malloc() fails ....
         */
        lock = 1;

        /*
         * If we have completed startup initialization, all error messages
         * must be saved.  These are reported through dlerror().  If we're
         * still in the initialization stage, output the error directly and
         * add a newline.
         */
        prf.pr_buf = prf.pr_cur = nextptr;
        prf.pr_len = ERRSIZE - (nextptr - errbuf);

        if ((rtld_flags & RT_FL_APPLIC) == 0)
                prf.pr_fd = 2;
        else
                prf.pr_fd = -1;

        if (error > ERR_NONE) {
                if ((error == ERR_FATAL) && (rtld_flags2 & RT_FL2_FTL2WARN))
                        error = ERR_WARNING;
                switch (error) {
                case ERR_WARNING_NF:
                        if (err_strs[ERR_WARNING_NF] == NULL)
                                err_strs[ERR_WARNING_NF] =
                                    MSG_INTL(MSG_ERR_WARNING);
                        break;
                case ERR_WARNING:
                        if (err_strs[ERR_WARNING] == NULL)
                                err_strs[ERR_WARNING] =
                                    MSG_INTL(MSG_ERR_WARNING);
                        break;
                case ERR_GUIDANCE:
                        if (err_strs[ERR_GUIDANCE] == NULL)
                                err_strs[ERR_GUIDANCE] =
                                    MSG_INTL(MSG_ERR_GUIDANCE);
                        break;
                case ERR_FATAL:
                        if (err_strs[ERR_FATAL] == NULL)
                                err_strs[ERR_FATAL] = MSG_INTL(MSG_ERR_FATAL);
                        break;
                case ERR_ELF:
                        if (err_strs[ERR_ELF] == NULL)
                                err_strs[ERR_ELF] = MSG_INTL(MSG_ERR_ELF);
                        break;
                }
                if (procname) {
                        if (bufprint(&prf, MSG_ORIG(MSG_STR_EMSGFOR1),
                            rtldname, procname, err_strs[error]) == 0)
                                overflow = 1;
                } else {
                        if (bufprint(&prf, MSG_ORIG(MSG_STR_EMSGFOR2),
                            rtldname, err_strs[error]) == 0)
                                overflow = 1;
                }
                if (overflow == 0) {
                        /*
                         * Remove the terminating '\0'.
                         */
                        prf.pr_cur--;
                }
        }

        if ((overflow == 0) && doprf(format, args, &prf) == 0)
                overflow = 1;

        /*
         * If this is an ELF error, it will have been generated by a support
         * object that has a dependency on libelf.  ld.so.1 doesn't generate any
         * ELF error messages as it doesn't interact with libelf.  Determine the
         * ELF error string.
         */
        if ((overflow == 0) && (error == ERR_ELF)) {
                static int              (*elfeno)() = 0;
                static const char       *(*elfemg)();
                const char              *emsg;
                Rt_map                  *dlmp, *lmp = lml_rtld.lm_head;

                if (NEXT(lmp) && (elfeno == 0)) {
                        if (((elfemg = (const char *(*)())dlsym_intn(RTLD_NEXT,
                            MSG_ORIG(MSG_SYM_ELFERRMSG),
                            lmp, &dlmp)) == NULL) ||
                            ((elfeno = (int (*)())dlsym_intn(RTLD_NEXT,
                            MSG_ORIG(MSG_SYM_ELFERRNO), lmp, &dlmp)) == NULL))
                                elfeno = 0;
                }

                /*
                 * Lookup the message; equivalent to elf_errmsg(elf_errno()).
                 */
                if (elfeno && ((emsg = (* elfemg)((* elfeno)())) != NULL)) {
                        prf.pr_cur--;
                        if (bufprint(&prf, MSG_ORIG(MSG_STR_EMSGFOR2),
                            emsg) == 0)
                                overflow = 1;
                }
        }

        /*
         * Push out any message that's been built.  Note, in the case of an
         * overflow condition, this message may be incomplete, in which case
         * make sure any partial string is null terminated.
         */
        if ((rtld_flags & (RT_FL_APPLIC | RT_FL_SILENCERR)) == 0) {
                *(prf.pr_cur - 1) = '\n';
                (void) dowrite(&prf);
        }
        if (overflow)
                *(prf.pr_cur - 1) = '\0';

        DBG_CALL(Dbg_util_str(lml, nextptr));

        /*
         * Determine if there was insufficient space left in the buffer to
         * complete the message.  If so, we'll have printed out as much as had
         * been processed if we're not yet executing the application.
         * Otherwise, there will be some debugging diagnostic indicating
         * as much of the error message as possible.  Write out a final buffer
         * overflow diagnostic - unlocalized, so we don't chance more errors.
         */
        if (overflow) {
                char    *str = (char *)MSG_INTL(MSG_EMG_BUFOVRFLW);

                if ((rtld_flags & RT_FL_SILENCERR) == 0) {
                        lasterr = str;

                        if ((rtld_flags & RT_FL_APPLIC) == 0) {
                                (void) write(2, str, strlen(str));
                                (void) write(2, MSG_ORIG(MSG_STR_NL),
                                    MSG_STR_NL_SIZE);
                        }
                }
                DBG_CALL(Dbg_util_str(lml, str));

                lock = 0;
                nextptr = errbuf + ERRSIZE;
                return;
        }

        /*
         * If the application has started, then error messages are being saved
         * for retrieval by dlerror(), or possible flushing from rtldexit() in
         * the case of a fatal error.  In this case, establish the next error
         * pointer.  If we haven't started the application, the whole message
         * buffer can be reused.
         */
        if ((rtld_flags & RT_FL_SILENCERR) == 0) {
                lasterr = nextptr;

                /*
                 * Note, should we encounter an error such as ENOMEM, there may
                 * be a number of the same error messages (ie. an operation
                 * fails with ENOMEM, and then the attempts to construct the
                 * error message itself, which incurs additional ENOMEM errors).
                 * Compare any previous error message with the one we've just
                 * created to prevent any duplication clutter.
                 */
                if ((rtld_flags & RT_FL_APPLIC) &&
                    ((prevptr == NULL) || (strcmp(prevptr, nextptr) != 0))) {
                        prevptr = nextptr;
                        nextptr = prf.pr_cur;
                        *nextptr = '\0';
                }
        }
        lock = 0;
}

/*PRINTFLIKE3*/
void
eprintf(Lm_list *lml, Error error, const char *format, ...)
{
        va_list         args;

        va_start(args, format);
        veprintf(lml, error, format, args);
        va_end(args);
}

/*
 * Provide assfail() for ASSERT() statements.  See <sys/debug.h> for further
 * details.
 */
int
assfail(const char *a, const char *f, int l)
{
        (void) printf("assertion failed: %s, file: %s, line: %d\n", a, f, l);
        (void) _lwp_kill(_lwp_self(), SIGABRT);
        return (0);
}

void
assfail3(const char *msg, uintmax_t a, const char *op, uintmax_t b,
    const char *f, int l)
{
        (void) printf("assertion failed: %s (0x%llx %s 0x%llx), "
            "file: %s, line: %d\n", msg, (unsigned long long)a, op,
            (unsigned long long)b, f, l);
        (void) _lwp_kill(_lwp_self(), SIGABRT);
}

/*
 * Exit.  If we arrive here with a non zero status it's because of a fatal
 * error condition (most commonly a relocation error).  If the application has
 * already had control, then the actual fatal error message will have been
 * recorded in the dlerror() message buffer.  Print the message before really
 * exiting.
 */
void
rtldexit(Lm_list * lml, int status)
{
        if (status) {
                if (rtld_flags & RT_FL_APPLIC) {
                        /*
                         * If the error buffer has been used, write out all
                         * pending messages - lasterr is simply a pointer to
                         * the last message in this buffer.  However, if the
                         * buffer couldn't be created at all, lasterr points
                         * to a constant error message string.
                         */
                        if (*errbuf) {
                                char    *errptr = errbuf;
                                char    *errend = errbuf + ERRSIZE;

                                while ((errptr < errend) && *errptr) {
                                        size_t  size = strlen(errptr);
                                        (void) write(2, errptr, size);
                                        (void) write(2, MSG_ORIG(MSG_STR_NL),
                                            MSG_STR_NL_SIZE);
                                        errptr += (size + 1);
                                }
                        }
                        if (lasterr && ((lasterr < errbuf) ||
                            (lasterr > (errbuf + ERRSIZE)))) {
                                (void) write(2, lasterr, strlen(lasterr));
                                (void) write(2, MSG_ORIG(MSG_STR_NL),
                                    MSG_STR_NL_SIZE);
                        }
                }
                leave(lml, 0);
                (void) _lwp_kill(_lwp_self(), killsig);
        }
        _exit(status);
}

/*
 * Map anonymous memory via MAP_ANON (added in Solaris 8).
 */
void *
dz_map(Lm_list *lml, caddr_t addr, size_t len, int prot, int flags)
{
        caddr_t va;

        if ((va = (caddr_t)mmap(addr, len, prot,
            (flags | MAP_ANON), -1, 0)) == MAP_FAILED) {
                int     err = errno;
                eprintf(lml, ERR_FATAL, MSG_INTL(MSG_SYS_MMAPANON),
                    strerror(err));
                return (MAP_FAILED);
        }
        return (va);
}

static int      nu_fd = FD_UNAVAIL;

void *
nu_map(Lm_list *lml, caddr_t addr, size_t len, int prot, int flags)
{
        caddr_t va;
        int     err;

        if (nu_fd == FD_UNAVAIL) {
                if ((nu_fd = open(MSG_ORIG(MSG_PTH_DEVNULL),
                    O_RDONLY)) == FD_UNAVAIL) {
                        err = errno;
                        eprintf(lml, ERR_FATAL, MSG_INTL(MSG_SYS_OPEN),
                            MSG_ORIG(MSG_PTH_DEVNULL), strerror(err));
                        return (MAP_FAILED);
                }
        }

        if ((va = (caddr_t)mmap(addr, len, prot, flags, nu_fd, 0)) ==
            MAP_FAILED) {
                err = errno;
                eprintf(lml, ERR_FATAL, MSG_INTL(MSG_SYS_MMAP),
                    MSG_ORIG(MSG_PTH_DEVNULL), strerror(err));
        }
        return (va);
}

/*
 * Generic entry point from user code - simply grabs a lock, and bumps the
 * entrance count.
 */
int
enter(int flags)
{
        if (rt_bind_guard(THR_FLG_RTLD | thr_flg_nolock | flags)) {
                if (!thr_flg_nolock)
                        (void) rt_mutex_lock(&rtldlock);
                if (rtld_flags & RT_FL_OPERATION) {
                        ld_entry_cnt++;

                        /*
                         * Reset the diagnostic time information for each new
                         * "operation".  Thus timing diagnostics are relative
                         * to entering ld.so.1.
                         */
                        if (DBG_ISTIME() &&
                            (gettimeofday(&DBG_TOTALTIME, NULL) == 0)) {
                                DBG_DELTATIME = DBG_TOTALTIME;
                                DBG_ONRESET();
                        }
                }
                return (1);
        }
        return (0);
}

/*
 * Determine whether a search path has been used.
 */
static void
is_path_used(Lm_list *lml, Word unref, int *nl, Alist *alp, const char *obj)
{
        Pdesc   *pdp;
        Aliste  idx;

        for (ALIST_TRAVERSE(alp, idx, pdp)) {
                const char      *fmt, *name;

                if ((pdp->pd_plen == 0) || (pdp->pd_flags & PD_FLG_USED))
                        continue;

                /*
                 * If this pathname originated from an expanded token, use the
                 * original for any diagnostic output.
                 */
                if ((name = pdp->pd_oname) == NULL)
                        name = pdp->pd_pname;

                if (unref == 0) {
                        if ((*nl)++ == 0)
                                DBG_CALL(Dbg_util_nl(lml, DBG_NL_STD));
                        DBG_CALL(Dbg_unused_path(lml, name, pdp->pd_flags,
                            (pdp->pd_flags & PD_FLG_DUPLICAT), obj));
                        continue;
                }

                if (pdp->pd_flags & LA_SER_LIBPATH) {
                        if (pdp->pd_flags & LA_SER_CONFIG) {
                                if (pdp->pd_flags & PD_FLG_DUPLICAT)
                                        fmt = MSG_INTL(MSG_DUP_LDLIBPATHC);
                                else
                                        fmt = MSG_INTL(MSG_USD_LDLIBPATHC);
                        } else {
                                if (pdp->pd_flags & PD_FLG_DUPLICAT)
                                        fmt = MSG_INTL(MSG_DUP_LDLIBPATH);
                                else
                                        fmt = MSG_INTL(MSG_USD_LDLIBPATH);
                        }
                } else if (pdp->pd_flags & LA_SER_RUNPATH) {
                        fmt = MSG_INTL(MSG_USD_RUNPATH);
                } else
                        continue;

                if ((*nl)++ == 0)
                        (void) printf(MSG_ORIG(MSG_STR_NL));
                (void) printf(fmt, name, obj);
        }
}

/*
 * Generate diagnostics as to whether an object has been used.  A symbolic
 * reference that gets bound to an object marks it as used.  Dependencies that
 * are unused when RTLD_NOW is in effect should be removed from future builds
 * of an object.  Dependencies that are unused without RTLD_NOW in effect are
 * candidates for lazy-loading.
 *
 * Unreferenced objects identify objects that are defined as dependencies but
 * are unreferenced by the caller.  These unreferenced objects may however be
 * referenced by other objects within the process, and therefore don't qualify
 * as completely unused.  They are still an unnecessary overhead.
 *
 * Unreferenced runpaths are also captured under ldd -U, or "unused,detail"
 * debugging.
 */
void
unused(Lm_list *lml)
{
        Rt_map          *lmp;
        int             nl = 0;
        Word            unref, unuse;

        /*
         * If we're not tracing unused references or dependencies, or debugging
         * there's nothing to do.
         */
        unref = lml->lm_flags & LML_FLG_TRC_UNREF;
        unuse = lml->lm_flags & LML_FLG_TRC_UNUSED;

        if ((unref == 0) && (unuse == 0) && (DBG_ENABLED == 0))
                return;

        /*
         * Detect unused global search paths.
         */
        if (rpl_libdirs)
                is_path_used(lml, unref, &nl, rpl_libdirs, config->c_name);
        if (prm_libdirs)
                is_path_used(lml, unref, &nl, prm_libdirs, config->c_name);

        nl = 0;
        lmp = lml->lm_head;
        if (RLIST(lmp))
                is_path_used(lml, unref, &nl, RLIST(lmp), NAME(lmp));

        /*
         * Traverse the link-maps looking for unreferenced or unused
         * dependencies.  Ignore the first object on a link-map list, as this
         * is always used.
         */
        nl = 0;
        for (lmp = NEXT_RT_MAP(lmp); lmp; lmp = NEXT_RT_MAP(lmp)) {
                /*
                 * Determine if this object contains any runpaths that have
                 * not been used.
                 */
                if (RLIST(lmp))
                        is_path_used(lml, unref, &nl, RLIST(lmp), NAME(lmp));

                /*
                 * If tracing unreferenced objects, or under debugging,
                 * determine whether any of this objects callers haven't
                 * referenced it.
                 */
                if (unref || DBG_ENABLED) {
                        Bnd_desc        *bdp;
                        Aliste          idx;

                        for (APLIST_TRAVERSE(CALLERS(lmp), idx, bdp)) {
                                Rt_map  *clmp;

                                if (bdp->b_flags & BND_REFER)
                                        continue;

                                clmp = bdp->b_caller;
                                if (FLAGS1(clmp) & FL1_RT_LDDSTUB)
                                        continue;

                                /* BEGIN CSTYLED */
                                if (nl++ == 0) {
                                        if (unref)
                                            (void) printf(MSG_ORIG(MSG_STR_NL));
                                        else
                                            DBG_CALL(Dbg_util_nl(lml,
                                                DBG_NL_STD));
                                }

                                if (unref)
                                    (void) printf(MSG_INTL(MSG_LDD_UNREF_FMT),
                                        NAME(lmp), NAME(clmp));
                                else
                                    DBG_CALL(Dbg_unused_unref(lmp, NAME(clmp)));
                                /* END CSTYLED */
                        }
                }

                /*
                 * If tracing unused objects simply display those objects that
                 * haven't been referenced by anyone.
                 */
                if (FLAGS1(lmp) & FL1_RT_USED)
                        continue;

                if (nl++ == 0) {
                        if (unref || unuse)
                                (void) printf(MSG_ORIG(MSG_STR_NL));
                        else
                                DBG_CALL(Dbg_util_nl(lml, DBG_NL_STD));
                }
                if (CYCGROUP(lmp)) {
                        if (unref || unuse)
                                (void) printf(MSG_INTL(MSG_LDD_UNCYC_FMT),
                                    NAME(lmp), CYCGROUP(lmp));
                        else
                                DBG_CALL(Dbg_unused_file(lml, NAME(lmp), 0,
                                    CYCGROUP(lmp)));
                } else {
                        if (unref || unuse)
                                (void) printf(MSG_INTL(MSG_LDD_UNUSED_FMT),
                                    NAME(lmp));
                        else
                                DBG_CALL(Dbg_unused_file(lml, NAME(lmp), 0, 0));
                }
        }

        DBG_CALL(Dbg_util_nl(lml, DBG_NL_STD));
}

/*
 * Generic cleanup routine called prior to returning control to the user.
 * Ensures that any ld.so.1 specific file descriptors or temporary mapping are
 * released, and any locks dropped.
 */
void
leave(Lm_list *lml, int flags)
{
        /*
         * Alert the debuggers that the link-maps are consistent.
         */
        rd_event(lml, RD_DLACTIVITY, RT_CONSISTENT);

        /*
         * Alert any auditors that the link-maps are consistent.
         */
        if (lml->lm_flags & LML_FLG_ACTAUDIT) {
                audit_activity(lml->lm_head, LA_ACT_CONSISTENT);
                lml->lm_flags &= ~LML_FLG_ACTAUDIT;
        }

        if (nu_fd != FD_UNAVAIL) {
                (void) close(nu_fd);
                nu_fd = FD_UNAVAIL;
        }

        /*
         * Reinitialize error message pointer, and any overflow indication.
         */
        nextptr = errbuf;
        prevptr = NULL;

        /*
         * Defragment any freed memory.
         */
        if (aplist_nitems(free_alp))
                defrag();

        /*
         * Don't drop our lock if we are running on our link-map list as
         * there's little point in doing so since we are single-threaded.
         *
         * LML_FLG_HOLDLOCK is set for:
         *  -    The ld.so.1's link-map list.
         *  -    The auditor's link-map if the environment is pre-UPM.
         */
        if (lml->lm_flags & LML_FLG_HOLDLOCK)
                return;

        if (rt_bind_clear(0) & THR_FLG_RTLD) {
                if (!thr_flg_nolock)
                        (void) rt_mutex_unlock(&rtldlock);
                (void) rt_bind_clear(THR_FLG_RTLD | thr_flg_nolock | flags);
        }
}

int
callable(Rt_map *clmp, Rt_map *dlmp, Grp_hdl *ghp, uint_t slflags)
{
        APlist          *calp, *dalp;
        Aliste          idx1, idx2;
        Grp_hdl         *ghp1, *ghp2;

        /*
         * An object can always find symbols within itself.
         */
        if (clmp == dlmp)
                return (1);

        /*
         * The search for a singleton must look in every loaded object.
         */
        if (slflags & LKUP_SINGLETON)
                return (1);

        /*
         * Don't allow an object to bind to an object that is being deleted
         * unless the binder is also being deleted.
         */
        if ((FLAGS(dlmp) & FLG_RT_DELETE) &&
            ((FLAGS(clmp) & FLG_RT_DELETE) == 0))
                return (0);

        /*
         * An object with world access can always bind to an object with global
         * visibility.
         */
        if (((MODE(clmp) & RTLD_WORLD) || (slflags & LKUP_WORLD)) &&
            (MODE(dlmp) & RTLD_GLOBAL))
                return (1);

        /*
         * An object with local access can only bind to an object that is a
         * member of the same group.
         */
        if (((MODE(clmp) & RTLD_GROUP) == 0) ||
            ((calp = GROUPS(clmp)) == NULL) || ((dalp = GROUPS(dlmp)) == NULL))
                return (0);

        /*
         * Traverse the list of groups the caller is a part of.
         */
        for (APLIST_TRAVERSE(calp, idx1, ghp1)) {
                /*
                 * If we're testing for the ability of two objects to bind to
                 * each other regardless of a specific group, ignore that group.
                 */
                if (ghp && (ghp1 == ghp))
                        continue;

                /*
                 * Traverse the list of groups the destination is a part of.
                 */
                for (APLIST_TRAVERSE(dalp, idx2, ghp2)) {
                        Grp_desc        *gdp;
                        Aliste          idx3;

                        if (ghp1 != ghp2)
                                continue;

                        /*
                         * Make sure the relationship between the destination
                         * and the caller provide symbols for relocation.
                         * Parents are maintained as callers, but unless the
                         * destination object was opened with RTLD_PARENT, the
                         * parent doesn't provide symbols for the destination
                         * to relocate against.
                         */
                        for (ALIST_TRAVERSE(ghp2->gh_depends, idx3, gdp)) {
                                if (dlmp != gdp->gd_depend)
                                        continue;

                                if (gdp->gd_flags & GPD_RELOC)
                                        return (1);
                        }
                }
        }
        return (0);
}

/*
 * Initialize the environ symbol.  Traditionally this is carried out by the crt
 * code prior to jumping to main.  However, init sections get fired before this
 * variable is initialized, so ld.so.1 sets this directly from the AUX vector
 * information.  In addition, a process may have multiple link-maps (ld.so.1's
 * debugging and preloading objects), and link auditing, and each may need an
 * environ variable set.
 *
 * This routine is called after a relocation() pass, and thus provides for:
 *
 *  -   setting environ on the main link-map after the initial application and
 *      its dependencies have been established.  Typically environ lives in the
 *      application (provided by its crt), but in older applications it might
 *      be in libc.  Who knows what's expected of applications not built on
 *      Solaris.
 *
 *  -   after loading a new shared object.  We can add shared objects to various
 *      link-maps, and any link-map dependencies requiring getopt() require
 *      their own environ.  In addition, lazy loading might bring in the
 *      supplier of environ (libc used to be a lazy loading candidate) after
 *      the link-map has been established and other objects are present.
 *
 * This routine handles all these scenarios, without adding unnecessary overhead
 * to ld.so.1.
 */
void
set_environ(Lm_list *lml)
{
        Slookup         sl;
        Sresult         sr;
        uint_t          binfo;

        /*
         * Initialize the symbol lookup, and symbol result, data structures.
         */
        SLOOKUP_INIT(sl, MSG_ORIG(MSG_SYM_ENVIRON), lml->lm_head, lml->lm_head,
            ld_entry_cnt, 0, 0, 0, 0, LKUP_WEAK);
        SRESULT_INIT(sr, MSG_ORIG(MSG_SYM_ENVIRON));

        if (LM_LOOKUP_SYM(lml->lm_head)(&sl, &sr, &binfo, 0)) {
                Rt_map  *dlmp = sr.sr_dmap;

                lml->lm_environ = (char ***)sr.sr_sym->st_value;

                if (!(FLAGS(dlmp) & FLG_RT_FIXED))
                        lml->lm_environ =
                            (char ***)((uintptr_t)lml->lm_environ +
                            (uintptr_t)ADDR(dlmp));
                *(lml->lm_environ) = (char **)environ;
                lml->lm_flags |= LML_FLG_ENVIRON;
        }
}

/*
 * Determine whether we have a secure executable.  Uid and gid information
 * can be passed to us via the aux vector, however if these values are -1
 * then use the appropriate system call to obtain them.
 *
 *  -   If the user is the root they can do anything
 *
 *  -   If the real and effective uid's don't match, or the real and
 *      effective gid's don't match then this is determined to be a `secure'
 *      application.
 *
 * This function is called prior to any dependency processing (see _setup.c).
 * Any secure setting will remain in effect for the life of the process.
 */
void
security(uid_t uid, uid_t euid, gid_t gid, gid_t egid, int auxflags)
{
        if (auxflags != -1) {
                if ((auxflags & AF_SUN_SETUGID) != 0)
                        rtld_flags |= RT_FL_SECURE;
                return;
        }

        if (uid == (uid_t)-1)
                uid = getuid();
        if (uid) {
                if (euid == (uid_t)-1)
                        euid = geteuid();
                if (uid != euid)
                        rtld_flags |= RT_FL_SECURE;
                else {
                        if (gid == (gid_t)-1)
                                gid = getgid();
                        if (egid == (gid_t)-1)
                                egid = getegid();
                        if (gid != egid)
                                rtld_flags |= RT_FL_SECURE;
                }
        }
}

/*
 * Determine whether ld.so.1 itself is owned by root and has its mode setuid.
 */
int
is_rtld_setuid()
{
        rtld_stat_t     status;
        const char      *name;

        if (rtld_flags2 & RT_FL2_SETUID)
                return (1);

        if (interp && interp->i_name)
                name = interp->i_name;
        else
                name = NAME(lml_rtld.lm_head);

        if (((rtld_stat(name, &status) == 0) &&
            (status.st_uid == 0) && (status.st_mode & S_ISUID))) {
                rtld_flags2 |= RT_FL2_SETUID;
                return (1);
        }
        return (0);
}

/*
 * Determine that systems platform name.  Normally, this name is provided from
 * the AT_SUN_PLATFORM aux vector from the kernel.  This routine provides a
 * fall back.
 */
void
platform_name(Syscapset *scapset)
{
        char    info[SYS_NMLN];
        size_t  size;

        if ((scapset->sc_platsz = size =
            sysinfo(SI_PLATFORM, info, SYS_NMLN)) == (size_t)-1)
                return;

        if ((scapset->sc_plat = malloc(size)) == NULL) {
                scapset->sc_platsz = (size_t)-1;
                return;
        }
        (void) strcpy(scapset->sc_plat, info);
}

/*
 * Determine that systems machine name.  Normally, this name is provided from
 * the AT_SUN_MACHINE aux vector from the kernel.  This routine provides a
 * fall back.
 */
void
machine_name(Syscapset *scapset)
{
        char    info[SYS_NMLN];
        size_t  size;

        if ((scapset->sc_machsz = size =
            sysinfo(SI_MACHINE, info, SYS_NMLN)) == (size_t)-1)
                return;

        if ((scapset->sc_mach = malloc(size)) == NULL) {
                scapset->sc_machsz = (size_t)-1;
                return;
        }
        (void) strcpy(scapset->sc_mach, info);
}

/*
 * _REENTRANT code gets errno redefined to a function so provide for return
 * of the thread errno if applicable.  This has no meaning in ld.so.1 which
 * is basically singled threaded.  Provide the interface for our dependencies.
 */
#undef errno
int *
___errno()
{
        extern  int     errno;

        return (&errno);
}

/*
 * Determine whether a symbol name should be demangled.
 */
const char *
demangle(const char *name)
{
        if (rtld_flags & RT_FL_DEMANGLE)
                return (conv_demangle_name(name));
        else
                return (name);
}

#ifndef _LP64
/*
 * Wrappers on stat() and fstat() for 32-bit rtld that uses stat64()
 * underneath while preserving the object size limits of a non-largefile
 * enabled 32-bit process. The purpose of this is to prevent large inode
 * values from causing stat() to fail.
 */
inline static int
rtld_stat_process(int r, struct stat64 *lbuf, rtld_stat_t *restrict buf)
{
        extern int      errno;

        /*
         * Although we used a 64-bit capable stat(), the 32-bit rtld
         * can only handle objects < 2GB in size. If this object is
         * too big, turn the success into an overflow error.
         */
        if ((lbuf->st_size & 0xffffffff80000000) != 0) {
                errno = EOVERFLOW;
                return (-1);
        }

        /*
         * Transfer the information needed by rtld into a rtld_stat_t
         * structure that preserves the non-largile types for everything
         * except inode.
         */
        buf->st_dev = lbuf->st_dev;
        buf->st_ino = lbuf->st_ino;
        buf->st_mode = lbuf->st_mode;
        buf->st_uid = lbuf->st_uid;
        buf->st_size = (off_t)lbuf->st_size;
        buf->st_mtim = lbuf->st_mtim;
#ifdef sparc
        buf->st_blksize = lbuf->st_blksize;
#endif

        return (r);
}

int
rtld_stat(const char *restrict path, rtld_stat_t *restrict buf)
{
        struct stat64   lbuf;
        int             r;

        r = stat64(path, &lbuf);
        if (r != -1)
                r = rtld_stat_process(r, &lbuf, buf);
        return (r);
}

int
rtld_fstat(int fildes, rtld_stat_t *restrict buf)
{
        struct stat64   lbuf;
        int             r;

        r = fstat64(fildes, &lbuf);
        if (r != -1)
                r = rtld_stat_process(r, &lbuf, buf);
        return (r);
}
#endif