4 * The contents of this file are subject to the terms of the
5 * Common Development and Distribution License (the "License").
6 * You may not use this file except in compliance with the License.
8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9 * or http://www.opensolaris.org/os/licensing.
10 * See the License for the specific language governing permissions
11 * and limitations under the License.
13 * When distributing Covered Code, include this CDDL HEADER in each
14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15 * If applicable, add the following below this CDDL HEADER, with the
16 * fields enclosed by brackets "[]" replaced with your own identifying
17 * information: Portions Copyright [yyyy] [name of copyright owner]
23 * Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved.
24 * Copyright (c) 2011, 2018 by Delphix. All rights reserved.
25 * Copyright 2011 Nexenta Systems, Inc. All rights reserved.
26 * Copyright (c) 2012, Joyent, Inc. All rights reserved.
27 * Copyright 2013 DEY Storage Systems, Inc.
28 * Copyright 2014 HybridCluster. All rights reserved.
29 * Copyright (c) 2014 Spectra Logic Corporation, All rights reserved.
30 * Copyright 2013 Saso Kiselkov. All rights reserved.
31 * Copyright (c) 2017, Intel Corporation.
32 * Copyright (c) 2014 Integros [integros.com]
35 /* Portions Copyright 2010 Robert Milkowski */
41 * This file describes the interface that the DMU provides for its
44 * The DMU also interacts with the SPA. That interface is described in
48 #include <sys/zfs_context.h>
49 #include <sys/inttypes.h>
51 #include <sys/fs/zfs.h>
52 #include <sys/zio_compress.h>
53 #include <sys/zio_priority.h>
73 struct zbookmark_phys
;
80 struct dsl_crypto_params
;
82 typedef struct objset objset_t
;
83 typedef struct dmu_tx dmu_tx_t
;
84 typedef struct dsl_dir dsl_dir_t
;
85 typedef struct dnode dnode_t
;
87 typedef enum dmu_object_byteswap
{
99 * Allocating a new byteswap type number makes the on-disk format
100 * incompatible with any other format that uses the same number.
102 * Data can usually be structured to work with one of the
103 * DMU_BSWAP_UINT* or DMU_BSWAP_ZAP types.
106 } dmu_object_byteswap_t
;
108 #define DMU_OT_NEWTYPE 0x80
109 #define DMU_OT_METADATA 0x40
110 #define DMU_OT_ENCRYPTED 0x20
111 #define DMU_OT_BYTESWAP_MASK 0x1f
114 * Defines a uint8_t object type. Object types specify if the data
115 * in the object is metadata (boolean) and how to byteswap the data
116 * (dmu_object_byteswap_t). All of the types created by this method
117 * are cached in the dbuf metadata cache.
119 #define DMU_OT(byteswap, metadata, encrypted) \
121 ((metadata) ? DMU_OT_METADATA : 0) | \
122 ((encrypted) ? DMU_OT_ENCRYPTED : 0) | \
123 ((byteswap) & DMU_OT_BYTESWAP_MASK))
125 #define DMU_OT_IS_VALID(ot) (((ot) & DMU_OT_NEWTYPE) ? \
126 ((ot) & DMU_OT_BYTESWAP_MASK) < DMU_BSWAP_NUMFUNCS : \
127 (ot) < DMU_OT_NUMTYPES)
130 * MDB doesn't have dmu_ot; it defines these macros itself.
133 #define DMU_OT_IS_METADATA_IMPL(ot) (dmu_ot[ot].ot_metadata)
134 #define DMU_OT_IS_ENCRYPTED_IMPL(ot) (dmu_ot[ot].ot_encrypt)
135 #define DMU_OT_BYTESWAP_IMPL(ot) (dmu_ot[ot].ot_byteswap)
138 #define DMU_OT_IS_METADATA(ot) (((ot) & DMU_OT_NEWTYPE) ? \
139 ((ot) & DMU_OT_METADATA) : \
140 DMU_OT_IS_METADATA_IMPL(ot))
142 #define DMU_OT_IS_DDT(ot) \
143 ((ot) == DMU_OT_DDT_ZAP)
145 #define DMU_OT_IS_ZIL(ot) \
146 ((ot) == DMU_OT_INTENT_LOG)
148 /* Note: ztest uses DMU_OT_UINT64_OTHER as a proxy for file blocks */
149 #define DMU_OT_IS_FILE(ot) \
150 ((ot) == DMU_OT_PLAIN_FILE_CONTENTS || (ot) == DMU_OT_UINT64_OTHER)
152 #define DMU_OT_IS_METADATA_CACHED(ot) (((ot) & DMU_OT_NEWTYPE) ? \
153 B_TRUE : dmu_ot[(ot)].ot_dbuf_metadata_cache)
155 #define DMU_OT_IS_ENCRYPTED(ot) (((ot) & DMU_OT_NEWTYPE) ? \
156 ((ot) & DMU_OT_ENCRYPTED) : \
157 DMU_OT_IS_ENCRYPTED_IMPL(ot))
160 * These object types use bp_fill != 1 for their L0 bp's. Therefore they can't
161 * have their data embedded (i.e. use a BP_IS_EMBEDDED() bp), because bp_fill
162 * is repurposed for embedded BPs.
164 #define DMU_OT_HAS_FILL(ot) \
165 ((ot) == DMU_OT_DNODE || (ot) == DMU_OT_OBJSET)
167 #define DMU_OT_BYTESWAP(ot) (((ot) & DMU_OT_NEWTYPE) ? \
168 ((ot) & DMU_OT_BYTESWAP_MASK) : \
169 DMU_OT_BYTESWAP_IMPL(ot))
171 typedef enum dmu_object_type
{
174 DMU_OT_OBJECT_DIRECTORY
, /* ZAP */
175 DMU_OT_OBJECT_ARRAY
, /* UINT64 */
176 DMU_OT_PACKED_NVLIST
, /* UINT8 (XDR by nvlist_pack/unpack) */
177 DMU_OT_PACKED_NVLIST_SIZE
, /* UINT64 */
178 DMU_OT_BPOBJ
, /* UINT64 */
179 DMU_OT_BPOBJ_HDR
, /* UINT64 */
181 DMU_OT_SPACE_MAP_HEADER
, /* UINT64 */
182 DMU_OT_SPACE_MAP
, /* UINT64 */
184 DMU_OT_INTENT_LOG
, /* UINT64 */
186 DMU_OT_DNODE
, /* DNODE */
187 DMU_OT_OBJSET
, /* OBJSET */
189 DMU_OT_DSL_DIR
, /* UINT64 */
190 DMU_OT_DSL_DIR_CHILD_MAP
, /* ZAP */
191 DMU_OT_DSL_DS_SNAP_MAP
, /* ZAP */
192 DMU_OT_DSL_PROPS
, /* ZAP */
193 DMU_OT_DSL_DATASET
, /* UINT64 */
195 DMU_OT_ZNODE
, /* ZNODE */
196 DMU_OT_OLDACL
, /* Old ACL */
197 DMU_OT_PLAIN_FILE_CONTENTS
, /* UINT8 */
198 DMU_OT_DIRECTORY_CONTENTS
, /* ZAP */
199 DMU_OT_MASTER_NODE
, /* ZAP */
200 DMU_OT_UNLINKED_SET
, /* ZAP */
202 DMU_OT_ZVOL
, /* UINT8 */
203 DMU_OT_ZVOL_PROP
, /* ZAP */
204 /* other; for testing only! */
205 DMU_OT_PLAIN_OTHER
, /* UINT8 */
206 DMU_OT_UINT64_OTHER
, /* UINT64 */
207 DMU_OT_ZAP_OTHER
, /* ZAP */
208 /* new object types: */
209 DMU_OT_ERROR_LOG
, /* ZAP */
210 DMU_OT_SPA_HISTORY
, /* UINT8 */
211 DMU_OT_SPA_HISTORY_OFFSETS
, /* spa_his_phys_t */
212 DMU_OT_POOL_PROPS
, /* ZAP */
213 DMU_OT_DSL_PERMS
, /* ZAP */
214 DMU_OT_ACL
, /* ACL */
215 DMU_OT_SYSACL
, /* SYSACL */
216 DMU_OT_FUID
, /* FUID table (Packed NVLIST UINT8) */
217 DMU_OT_FUID_SIZE
, /* FUID table size UINT64 */
218 DMU_OT_NEXT_CLONES
, /* ZAP */
219 DMU_OT_SCAN_QUEUE
, /* ZAP */
220 DMU_OT_USERGROUP_USED
, /* ZAP */
221 DMU_OT_USERGROUP_QUOTA
, /* ZAP */
222 DMU_OT_USERREFS
, /* ZAP */
223 DMU_OT_DDT_ZAP
, /* ZAP */
224 DMU_OT_DDT_STATS
, /* ZAP */
225 DMU_OT_SA
, /* System attr */
226 DMU_OT_SA_MASTER_NODE
, /* ZAP */
227 DMU_OT_SA_ATTR_REGISTRATION
, /* ZAP */
228 DMU_OT_SA_ATTR_LAYOUTS
, /* ZAP */
229 DMU_OT_SCAN_XLATE
, /* ZAP */
230 DMU_OT_DEDUP
, /* fake dedup BP from ddt_bp_create() */
231 DMU_OT_DEADLIST
, /* ZAP */
232 DMU_OT_DEADLIST_HDR
, /* UINT64 */
233 DMU_OT_DSL_CLONES
, /* ZAP */
234 DMU_OT_BPOBJ_SUBOBJ
, /* UINT64 */
236 * Do not allocate new object types here. Doing so makes the on-disk
237 * format incompatible with any other format that uses the same object
240 * When creating an object which does not have one of the above types
241 * use the DMU_OTN_* type with the correct byteswap and metadata
244 * The DMU_OTN_* types do not have entries in the dmu_ot table,
245 * use the DMU_OT_IS_METDATA() and DMU_OT_BYTESWAP() macros instead
246 * use the DMU_OT_IS_METADATA() and DMU_OT_BYTESWAP() macros instead
247 * of indexing into dmu_ot directly (this works for both DMU_OT_* types
248 * and DMU_OTN_* types).
253 * Names for valid types declared with DMU_OT().
255 DMU_OTN_UINT8_DATA
= DMU_OT(DMU_BSWAP_UINT8
, B_FALSE
, B_FALSE
),
256 DMU_OTN_UINT8_METADATA
= DMU_OT(DMU_BSWAP_UINT8
, B_TRUE
, B_FALSE
),
257 DMU_OTN_UINT16_DATA
= DMU_OT(DMU_BSWAP_UINT16
, B_FALSE
, B_FALSE
),
258 DMU_OTN_UINT16_METADATA
= DMU_OT(DMU_BSWAP_UINT16
, B_TRUE
, B_FALSE
),
259 DMU_OTN_UINT32_DATA
= DMU_OT(DMU_BSWAP_UINT32
, B_FALSE
, B_FALSE
),
260 DMU_OTN_UINT32_METADATA
= DMU_OT(DMU_BSWAP_UINT32
, B_TRUE
, B_FALSE
),
261 DMU_OTN_UINT64_DATA
= DMU_OT(DMU_BSWAP_UINT64
, B_FALSE
, B_FALSE
),
262 DMU_OTN_UINT64_METADATA
= DMU_OT(DMU_BSWAP_UINT64
, B_TRUE
, B_FALSE
),
263 DMU_OTN_ZAP_DATA
= DMU_OT(DMU_BSWAP_ZAP
, B_FALSE
, B_FALSE
),
264 DMU_OTN_ZAP_METADATA
= DMU_OT(DMU_BSWAP_ZAP
, B_TRUE
, B_FALSE
),
266 DMU_OTN_UINT8_ENC_DATA
= DMU_OT(DMU_BSWAP_UINT8
, B_FALSE
, B_TRUE
),
267 DMU_OTN_UINT8_ENC_METADATA
= DMU_OT(DMU_BSWAP_UINT8
, B_TRUE
, B_TRUE
),
268 DMU_OTN_UINT16_ENC_DATA
= DMU_OT(DMU_BSWAP_UINT16
, B_FALSE
, B_TRUE
),
269 DMU_OTN_UINT16_ENC_METADATA
= DMU_OT(DMU_BSWAP_UINT16
, B_TRUE
, B_TRUE
),
270 DMU_OTN_UINT32_ENC_DATA
= DMU_OT(DMU_BSWAP_UINT32
, B_FALSE
, B_TRUE
),
271 DMU_OTN_UINT32_ENC_METADATA
= DMU_OT(DMU_BSWAP_UINT32
, B_TRUE
, B_TRUE
),
272 DMU_OTN_UINT64_ENC_DATA
= DMU_OT(DMU_BSWAP_UINT64
, B_FALSE
, B_TRUE
),
273 DMU_OTN_UINT64_ENC_METADATA
= DMU_OT(DMU_BSWAP_UINT64
, B_TRUE
, B_TRUE
),
274 DMU_OTN_ZAP_ENC_DATA
= DMU_OT(DMU_BSWAP_ZAP
, B_FALSE
, B_TRUE
),
275 DMU_OTN_ZAP_ENC_METADATA
= DMU_OT(DMU_BSWAP_ZAP
, B_TRUE
, B_TRUE
),
279 * These flags are intended to be used to specify the "txg_how"
280 * parameter when calling the dmu_tx_assign() function. See the comment
281 * above dmu_tx_assign() for more details on the meaning of these flags.
283 #define TXG_NOWAIT (0ULL)
284 #define TXG_WAIT (1ULL<<0)
285 #define TXG_NOTHROTTLE (1ULL<<1)
287 void byteswap_uint64_array(void *buf
, size_t size
);
288 void byteswap_uint32_array(void *buf
, size_t size
);
289 void byteswap_uint16_array(void *buf
, size_t size
);
290 void byteswap_uint8_array(void *buf
, size_t size
);
291 void zap_byteswap(void *buf
, size_t size
);
292 void zfs_oldacl_byteswap(void *buf
, size_t size
);
293 void zfs_acl_byteswap(void *buf
, size_t size
);
294 void zfs_znode_byteswap(void *buf
, size_t size
);
296 #define DS_FIND_SNAPSHOTS (1<<0)
297 #define DS_FIND_CHILDREN (1<<1)
298 #define DS_FIND_SERIALIZE (1<<2)
301 * The maximum number of bytes that can be accessed as part of one
302 * operation, including metadata.
304 #define DMU_MAX_ACCESS (32 * 1024 * 1024) /* 32MB */
305 #define DMU_MAX_DELETEBLKCNT (20480) /* ~5MB of indirect blocks */
307 #define DMU_USERUSED_OBJECT (-1ULL)
308 #define DMU_GROUPUSED_OBJECT (-2ULL)
309 #define DMU_PROJECTUSED_OBJECT (-3ULL)
312 * Zap prefix for object accounting in DMU_{USER,GROUP,PROJECT}USED_OBJECT.
314 #define DMU_OBJACCT_PREFIX "obj-"
315 #define DMU_OBJACCT_PREFIX_LEN 4
318 * artificial blkids for bonus buffer and spill blocks
320 #define DMU_BONUS_BLKID (-1ULL)
321 #define DMU_SPILL_BLKID (-2ULL)
324 * Public routines to create, destroy, open, and close objsets.
326 typedef void dmu_objset_create_sync_func_t(objset_t
*os
, void *arg
,
327 cred_t
*cr
, dmu_tx_t
*tx
);
329 int dmu_objset_hold(const char *name
, void *tag
, objset_t
**osp
);
330 int dmu_objset_own(const char *name
, dmu_objset_type_t type
,
331 boolean_t readonly
, boolean_t key_required
, void *tag
, objset_t
**osp
);
332 void dmu_objset_rele(objset_t
*os
, void *tag
);
333 void dmu_objset_disown(objset_t
*os
, boolean_t key_required
, void *tag
);
334 int dmu_objset_open_ds(struct dsl_dataset
*ds
, objset_t
**osp
);
336 void dmu_objset_evict_dbufs(objset_t
*os
);
337 int dmu_objset_create(const char *name
, dmu_objset_type_t type
, uint64_t flags
,
338 struct dsl_crypto_params
*dcp
, dmu_objset_create_sync_func_t func
,
340 int dmu_objset_clone(const char *name
, const char *origin
);
341 int dsl_destroy_snapshots_nvl(struct nvlist
*snaps
, boolean_t defer
,
342 struct nvlist
*errlist
);
343 int dmu_objset_snapshot_one(const char *fsname
, const char *snapname
);
344 int dmu_objset_snapshot_tmp(const char *, const char *, int);
345 int dmu_objset_find(char *name
, int func(const char *, void *), void *arg
,
347 void dmu_objset_byteswap(void *buf
, size_t size
);
348 int dsl_dataset_rename_snapshot(const char *fsname
,
349 const char *oldsnapname
, const char *newsnapname
, boolean_t recursive
);
350 int dmu_objset_remap_indirects(const char *fsname
);
352 typedef struct dmu_buf
{
353 uint64_t db_object
; /* object that this buffer is part of */
354 uint64_t db_offset
; /* byte offset in this object */
355 uint64_t db_size
; /* size of buffer in bytes */
356 void *db_data
; /* data in buffer */
360 * The names of zap entries in the DIRECTORY_OBJECT of the MOS.
362 #define DMU_POOL_DIRECTORY_OBJECT 1
363 #define DMU_POOL_CONFIG "config"
364 #define DMU_POOL_FEATURES_FOR_WRITE "features_for_write"
365 #define DMU_POOL_FEATURES_FOR_READ "features_for_read"
366 #define DMU_POOL_FEATURE_DESCRIPTIONS "feature_descriptions"
367 #define DMU_POOL_FEATURE_ENABLED_TXG "feature_enabled_txg"
368 #define DMU_POOL_ROOT_DATASET "root_dataset"
369 #define DMU_POOL_SYNC_BPOBJ "sync_bplist"
370 #define DMU_POOL_ERRLOG_SCRUB "errlog_scrub"
371 #define DMU_POOL_ERRLOG_LAST "errlog_last"
372 #define DMU_POOL_SPARES "spares"
373 #define DMU_POOL_DEFLATE "deflate"
374 #define DMU_POOL_HISTORY "history"
375 #define DMU_POOL_PROPS "pool_props"
376 #define DMU_POOL_L2CACHE "l2cache"
377 #define DMU_POOL_TMP_USERREFS "tmp_userrefs"
378 #define DMU_POOL_DDT "DDT-%s-%s-%s"
379 #define DMU_POOL_DDT_STATS "DDT-statistics"
380 #define DMU_POOL_CREATION_VERSION "creation_version"
381 #define DMU_POOL_SCAN "scan"
382 #define DMU_POOL_FREE_BPOBJ "free_bpobj"
383 #define DMU_POOL_BPTREE_OBJ "bptree_obj"
384 #define DMU_POOL_EMPTY_BPOBJ "empty_bpobj"
385 #define DMU_POOL_CHECKSUM_SALT "org.illumos:checksum_salt"
386 #define DMU_POOL_VDEV_ZAP_MAP "com.delphix:vdev_zap_map"
387 #define DMU_POOL_REMOVING "com.delphix:removing"
388 #define DMU_POOL_OBSOLETE_BPOBJ "com.delphix:obsolete_bpobj"
389 #define DMU_POOL_CONDENSING_INDIRECT "com.delphix:condensing_indirect"
390 #define DMU_POOL_ZPOOL_CHECKPOINT "com.delphix:zpool_checkpoint"
391 #define DMU_POOL_LOG_SPACEMAP_ZAP "com.delphix:log_spacemap_zap"
394 * Allocate an object from this objset. The range of object numbers
395 * available is (0, DN_MAX_OBJECT). Object 0 is the meta-dnode.
397 * The transaction must be assigned to a txg. The newly allocated
398 * object will be "held" in the transaction (ie. you can modify the
399 * newly allocated object in this transaction).
401 * dmu_object_alloc() chooses an object and returns it in *objectp.
403 * dmu_object_claim() allocates a specific object number. If that
404 * number is already allocated, it fails and returns EEXIST.
406 * Return 0 on success, or ENOSPC or EEXIST as specified above.
408 uint64_t dmu_object_alloc(objset_t
*os
, dmu_object_type_t ot
,
409 int blocksize
, dmu_object_type_t bonus_type
, int bonus_len
, dmu_tx_t
*tx
);
410 uint64_t dmu_object_alloc_ibs(objset_t
*os
, dmu_object_type_t ot
, int blocksize
,
411 int indirect_blockshift
,
412 dmu_object_type_t bonustype
, int bonuslen
, dmu_tx_t
*tx
);
413 uint64_t dmu_object_alloc_dnsize(objset_t
*os
, dmu_object_type_t ot
,
414 int blocksize
, dmu_object_type_t bonus_type
, int bonus_len
,
415 int dnodesize
, dmu_tx_t
*tx
);
416 int dmu_object_claim_dnsize(objset_t
*os
, uint64_t object
, dmu_object_type_t ot
,
417 int blocksize
, dmu_object_type_t bonus_type
, int bonus_len
,
418 int dnodesize
, dmu_tx_t
*tx
);
419 int dmu_object_reclaim_dnsize(objset_t
*os
, uint64_t object
,
420 dmu_object_type_t ot
, int blocksize
, dmu_object_type_t bonustype
,
421 int bonuslen
, int dnodesize
, boolean_t keep_spill
, dmu_tx_t
*txp
);
422 int dmu_object_claim(objset_t
*os
, uint64_t object
, dmu_object_type_t ot
,
423 int blocksize
, dmu_object_type_t bonus_type
, int bonus_len
, dmu_tx_t
*tx
);
424 int dmu_object_reclaim(objset_t
*os
, uint64_t object
, dmu_object_type_t ot
,
425 int blocksize
, dmu_object_type_t bonustype
, int bonuslen
, dmu_tx_t
*txp
);
426 int dmu_object_rm_spill(objset_t
*os
, uint64_t object
, dmu_tx_t
*tx
);
429 * Free an object from this objset.
431 * The object's data will be freed as well (ie. you don't need to call
432 * dmu_free(object, 0, -1, tx)).
434 * The object need not be held in the transaction.
436 * If there are any holds on this object's buffers (via dmu_buf_hold()),
437 * or tx holds on the object (via dmu_tx_hold_object()), you can not
438 * free it; it fails and returns EBUSY.
440 * If the object is not allocated, it fails and returns ENOENT.
442 * Return 0 on success, or EBUSY or ENOENT as specified above.
444 int dmu_object_free(objset_t
*os
, uint64_t object
, dmu_tx_t
*tx
);
447 * Find the next allocated or free object.
449 * The objectp parameter is in-out. It will be updated to be the next
450 * object which is allocated. Ignore objects which have not been
451 * modified since txg.
453 * XXX Can only be called on a objset with no dirty data.
455 * Returns 0 on success, or ENOENT if there are no more objects.
457 int dmu_object_next(objset_t
*os
, uint64_t *objectp
,
458 boolean_t hole
, uint64_t txg
);
461 * Set the number of levels on a dnode. nlevels must be greater than the
462 * current number of levels or an EINVAL will be returned.
464 int dmu_object_set_nlevels(objset_t
*os
, uint64_t object
, int nlevels
,
468 * Set the data blocksize for an object.
470 * The object cannot have any blocks allcated beyond the first. If
471 * the first block is allocated already, the new size must be greater
472 * than the current block size. If these conditions are not met,
473 * ENOTSUP will be returned.
475 * Returns 0 on success, or EBUSY if there are any holds on the object
476 * contents, or ENOTSUP as described above.
478 int dmu_object_set_blocksize(objset_t
*os
, uint64_t object
, uint64_t size
,
479 int ibs
, dmu_tx_t
*tx
);
482 * Manually set the maxblkid on a dnode. This will adjust nlevels accordingly
483 * to accommodate the change. When calling this function, the caller must
484 * ensure that the object's nlevels can sufficiently support the new maxblkid.
486 int dmu_object_set_maxblkid(objset_t
*os
, uint64_t object
, uint64_t maxblkid
,
490 * Set the checksum property on a dnode. The new checksum algorithm will
491 * apply to all newly written blocks; existing blocks will not be affected.
493 void dmu_object_set_checksum(objset_t
*os
, uint64_t object
, uint8_t checksum
,
497 * Set the compress property on a dnode. The new compression algorithm will
498 * apply to all newly written blocks; existing blocks will not be affected.
500 void dmu_object_set_compress(objset_t
*os
, uint64_t object
, uint8_t compress
,
503 int dmu_object_remap_indirects(objset_t
*os
, uint64_t object
, uint64_t txg
);
506 dmu_write_embedded(objset_t
*os
, uint64_t object
, uint64_t offset
,
507 void *data
, uint8_t etype
, uint8_t comp
, int uncompressed_size
,
508 int compressed_size
, int byteorder
, dmu_tx_t
*tx
);
511 * Decide how to write a block: checksum, compression, number of copies, etc.
513 #define WP_NOFILL 0x1
514 #define WP_DMU_SYNC 0x2
517 void dmu_write_policy(objset_t
*os
, dnode_t
*dn
, int level
, int wp
,
518 struct zio_prop
*zp
);
519 void dmu_write_policy_override_compress(struct zio_prop
*zp
,
520 enum zio_compress compress
);
521 void dmu_write_policy_override_encrypt(struct zio_prop
*zp
,
522 dmu_object_type_t ot
, boolean_t byteorder
, enum zio_compress compress
,
523 const uint8_t *salt
, const uint8_t *iv
, const uint8_t *mac
);
525 * The bonus data is accessed more or less like a regular buffer.
526 * You must dmu_bonus_hold() to get the buffer, which will give you a
527 * dmu_buf_t with db_offset==-1ULL, and db_size = the size of the bonus
528 * data. As with any normal buffer, you must call dmu_buf_will_dirty()
529 * before modifying it, and the
530 * object must be held in an assigned transaction before calling
531 * dmu_buf_will_dirty. You may use dmu_buf_set_user() on the bonus
532 * buffer as well. You must release your hold with dmu_buf_rele().
534 * Returns ENOENT, EIO, or 0.
536 int dmu_bonus_hold_impl(objset_t
*os
, uint64_t object
, void *tag
,
537 uint32_t flags
, dmu_buf_t
**dbp
);
538 int dmu_bonus_hold(objset_t
*os
, uint64_t object
, void *tag
, dmu_buf_t
**);
539 int dmu_bonus_hold_by_dnode(dnode_t
*dn
, void *tag
, dmu_buf_t
**dbp
,
541 int dmu_bonus_max(void);
542 int dmu_set_bonus(dmu_buf_t
*, int, dmu_tx_t
*);
543 int dmu_set_bonustype(dmu_buf_t
*, dmu_object_type_t
, dmu_tx_t
*);
544 dmu_object_type_t
dmu_get_bonustype(dmu_buf_t
*);
545 int dmu_rm_spill(objset_t
*, uint64_t, dmu_tx_t
*);
548 * Special spill buffer support used by "SA" framework
551 int dmu_spill_hold_by_bonus(dmu_buf_t
*bonus
, uint32_t flags
, void *tag
,
553 int dmu_spill_hold_by_dnode(dnode_t
*dn
, uint32_t flags
,
554 void *tag
, dmu_buf_t
**dbp
);
555 int dmu_spill_hold_existing(dmu_buf_t
*bonus
, void *tag
, dmu_buf_t
**dbp
);
558 * Obtain the DMU buffer from the specified object which contains the
559 * specified offset. dmu_buf_hold() puts a "hold" on the buffer, so
560 * that it will remain in memory. You must release the hold with
561 * dmu_buf_rele(). You musn't access the dmu_buf_t after releasing your
562 * hold. You must have a hold on any dmu_buf_t* you pass to the DMU.
564 * You must call dmu_buf_read, dmu_buf_will_dirty, or dmu_buf_will_fill
565 * on the returned buffer before reading or writing the buffer's
566 * db_data. The comments for those routines describe what particular
567 * operations are valid after calling them.
569 * The object number must be a valid, allocated object number.
571 int dmu_buf_hold(objset_t
*os
, uint64_t object
, uint64_t offset
,
572 void *tag
, dmu_buf_t
**, int flags
);
573 int dmu_buf_hold_by_dnode(dnode_t
*dn
, uint64_t offset
,
574 void *tag
, dmu_buf_t
**dbp
, int flags
);
577 * Add a reference to a dmu buffer that has already been held via
578 * dmu_buf_hold() in the current context.
580 void dmu_buf_add_ref(dmu_buf_t
*db
, void* tag
);
583 * Attempt to add a reference to a dmu buffer that is in an unknown state,
584 * using a pointer that may have been invalidated by eviction processing.
585 * The request will succeed if the passed in dbuf still represents the
586 * same os/object/blkid, is ineligible for eviction, and has at least
587 * one hold by a user other than the syncer.
589 boolean_t
dmu_buf_try_add_ref(dmu_buf_t
*, objset_t
*os
, uint64_t object
,
590 uint64_t blkid
, void *tag
);
592 void dmu_buf_rele(dmu_buf_t
*db
, void *tag
);
593 uint64_t dmu_buf_refcount(dmu_buf_t
*db
);
594 uint64_t dmu_buf_user_refcount(dmu_buf_t
*db
);
597 * dmu_buf_hold_array holds the DMU buffers which contain all bytes in a
598 * range of an object. A pointer to an array of dmu_buf_t*'s is
599 * returned (in *dbpp).
601 * dmu_buf_rele_array releases the hold on an array of dmu_buf_t*'s, and
602 * frees the array. The hold on the array of buffers MUST be released
603 * with dmu_buf_rele_array. You can NOT release the hold on each buffer
604 * individually with dmu_buf_rele.
606 int dmu_buf_hold_array_by_bonus(dmu_buf_t
*db
, uint64_t offset
,
607 uint64_t length
, boolean_t read
, void *tag
,
608 int *numbufsp
, dmu_buf_t
***dbpp
);
609 int dmu_buf_hold_array_by_dnode(dnode_t
*dn
, uint64_t offset
, uint64_t length
,
610 boolean_t read
, void *tag
, int *numbufsp
, dmu_buf_t
***dbpp
,
612 void dmu_buf_rele_array(dmu_buf_t
**, int numbufs
, void *tag
);
614 typedef void dmu_buf_evict_func_t(void *user_ptr
);
617 * A DMU buffer user object may be associated with a dbuf for the
618 * duration of its lifetime. This allows the user of a dbuf (client)
619 * to attach private data to a dbuf (e.g. in-core only data such as a
620 * dnode_children_t, zap_t, or zap_leaf_t) and be optionally notified
621 * when that dbuf has been evicted. Clients typically respond to the
622 * eviction notification by freeing their private data, thus ensuring
623 * the same lifetime for both dbuf and private data.
625 * The mapping from a dmu_buf_user_t to any client private data is the
626 * client's responsibility. All current consumers of the API with private
627 * data embed a dmu_buf_user_t as the first member of the structure for
628 * their private data. This allows conversions between the two types
629 * with a simple cast. Since the DMU buf user API never needs access
630 * to the private data, other strategies can be employed if necessary
631 * or convenient for the client (e.g. using __containerof() to do the
632 * conversion for private data that cannot have the dmu_buf_user_t as
635 * Eviction callbacks are executed without the dbuf mutex held or any
636 * other type of mechanism to guarantee that the dbuf is still available.
637 * For this reason, users must assume the dbuf has already been freed
638 * and not reference the dbuf from the callback context.
640 * Users requesting "immediate eviction" are notified as soon as the dbuf
641 * is only referenced by dirty records (dirties == holds). Otherwise the
642 * notification occurs after eviction processing for the dbuf begins.
644 typedef struct dmu_buf_user
{
646 * Asynchronous user eviction callback state.
648 taskq_ent_t dbu_tqent
;
651 * This instance's eviction function pointers.
653 * dbu_evict_func_sync is called synchronously and then
654 * dbu_evict_func_async is executed asynchronously on a taskq.
656 dmu_buf_evict_func_t
*dbu_evict_func_sync
;
657 dmu_buf_evict_func_t
*dbu_evict_func_async
;
660 * Pointer to user's dbuf pointer. NULL for clients that do
661 * not associate a dbuf with their user data.
663 * The dbuf pointer is cleared upon eviction so as to catch
664 * use-after-evict bugs in clients.
666 dmu_buf_t
**dbu_clear_on_evict_dbufp
;
671 * Initialize the given dmu_buf_user_t instance with the eviction function
672 * evict_func, to be called when the user is evicted.
674 * NOTE: This function should only be called once on a given dmu_buf_user_t.
675 * To allow enforcement of this, dbu must already be zeroed on entry.
679 dmu_buf_init_user(dmu_buf_user_t
*dbu
, dmu_buf_evict_func_t
*evict_func_sync
,
680 dmu_buf_evict_func_t
*evict_func_async
, dmu_buf_t
**clear_on_evict_dbufp
)
682 ASSERT(dbu
->dbu_evict_func_sync
== NULL
);
683 ASSERT(dbu
->dbu_evict_func_async
== NULL
);
685 /* must have at least one evict func */
686 IMPLY(evict_func_sync
== NULL
, evict_func_async
!= NULL
);
687 dbu
->dbu_evict_func_sync
= evict_func_sync
;
688 dbu
->dbu_evict_func_async
= evict_func_async
;
690 dbu
->dbu_clear_on_evict_dbufp
= clear_on_evict_dbufp
;
695 * Attach user data to a dbuf and mark it for normal (when the dbuf's
696 * data is cleared or its reference count goes to zero) eviction processing.
698 * Returns NULL on success, or the existing user if another user currently
701 void *dmu_buf_set_user(dmu_buf_t
*db
, dmu_buf_user_t
*user
);
704 * Attach user data to a dbuf and mark it for immediate (its dirty and
705 * reference counts are equal) eviction processing.
707 * Returns NULL on success, or the existing user if another user currently
710 void *dmu_buf_set_user_ie(dmu_buf_t
*db
, dmu_buf_user_t
*user
);
713 * Replace the current user of a dbuf.
715 * If given the current user of a dbuf, replaces the dbuf's user with
716 * "new_user" and returns the user data pointer that was replaced.
717 * Otherwise returns the current, and unmodified, dbuf user pointer.
719 void *dmu_buf_replace_user(dmu_buf_t
*db
,
720 dmu_buf_user_t
*old_user
, dmu_buf_user_t
*new_user
);
723 * Remove the specified user data for a DMU buffer.
725 * Returns the user that was removed on success, or the current user if
726 * another user currently owns the buffer.
728 void *dmu_buf_remove_user(dmu_buf_t
*db
, dmu_buf_user_t
*user
);
731 * Returns the user data (dmu_buf_user_t *) associated with this dbuf.
733 void *dmu_buf_get_user(dmu_buf_t
*db
);
735 objset_t
*dmu_buf_get_objset(dmu_buf_t
*db
);
736 dnode_t
*dmu_buf_dnode_enter(dmu_buf_t
*db
);
737 void dmu_buf_dnode_exit(dmu_buf_t
*db
);
739 /* Block until any in-progress dmu buf user evictions complete. */
740 void dmu_buf_user_evict_wait(void);
743 * Returns the blkptr associated with this dbuf, or NULL if not set.
745 struct blkptr
*dmu_buf_get_blkptr(dmu_buf_t
*db
);
748 * Indicate that you are going to modify the buffer's data (db_data).
750 * The transaction (tx) must be assigned to a txg (ie. you've called
751 * dmu_tx_assign()). The buffer's object must be held in the tx
752 * (ie. you've called dmu_tx_hold_object(tx, db->db_object)).
754 void dmu_buf_will_dirty(dmu_buf_t
*db
, dmu_tx_t
*tx
);
755 void dmu_buf_set_crypt_params(dmu_buf_t
*db_fake
, boolean_t byteorder
,
756 const uint8_t *salt
, const uint8_t *iv
, const uint8_t *mac
, dmu_tx_t
*tx
);
759 * You must create a transaction, then hold the objects which you will
760 * (or might) modify as part of this transaction. Then you must assign
761 * the transaction to a transaction group. Once the transaction has
762 * been assigned, you can modify buffers which belong to held objects as
763 * part of this transaction. You can't modify buffers before the
764 * transaction has been assigned; you can't modify buffers which don't
765 * belong to objects which this transaction holds; you can't hold
766 * objects once the transaction has been assigned. You may hold an
767 * object which you are going to free (with dmu_object_free()), but you
770 * You can abort the transaction before it has been assigned.
772 * Note that you may hold buffers (with dmu_buf_hold) at any time,
773 * regardless of transaction state.
776 #define DMU_NEW_OBJECT (-1ULL)
777 #define DMU_OBJECT_END (-1ULL)
779 dmu_tx_t
*dmu_tx_create(objset_t
*os
);
780 void dmu_tx_hold_write(dmu_tx_t
*tx
, uint64_t object
, uint64_t off
, int len
);
781 void dmu_tx_hold_write_by_dnode(dmu_tx_t
*tx
, dnode_t
*dn
, uint64_t off
,
783 void dmu_tx_hold_free(dmu_tx_t
*tx
, uint64_t object
, uint64_t off
,
785 void dmu_tx_hold_free_by_dnode(dmu_tx_t
*tx
, dnode_t
*dn
, uint64_t off
,
787 void dmu_tx_hold_remap_l1indirect(dmu_tx_t
*tx
, uint64_t object
);
788 void dmu_tx_hold_zap(dmu_tx_t
*tx
, uint64_t object
, int add
, const char *name
);
789 void dmu_tx_hold_zap_by_dnode(dmu_tx_t
*tx
, dnode_t
*dn
, int add
,
791 void dmu_tx_hold_bonus(dmu_tx_t
*tx
, uint64_t object
);
792 void dmu_tx_hold_bonus_by_dnode(dmu_tx_t
*tx
, dnode_t
*dn
);
793 void dmu_tx_hold_spill(dmu_tx_t
*tx
, uint64_t object
);
794 void dmu_tx_hold_sa(dmu_tx_t
*tx
, struct sa_handle
*hdl
, boolean_t may_grow
);
795 void dmu_tx_hold_sa_create(dmu_tx_t
*tx
, int total_size
);
796 void dmu_tx_abort(dmu_tx_t
*tx
);
797 int dmu_tx_assign(dmu_tx_t
*tx
, uint64_t txg_how
);
798 void dmu_tx_wait(dmu_tx_t
*tx
);
799 void dmu_tx_commit(dmu_tx_t
*tx
);
800 void dmu_tx_mark_netfree(dmu_tx_t
*tx
);
803 * To register a commit callback, dmu_tx_callback_register() must be called.
805 * dcb_data is a pointer to caller private data that is passed on as a
806 * callback parameter. The caller is responsible for properly allocating and
809 * When registering a callback, the transaction must be already created, but
810 * it cannot be committed or aborted. It can be assigned to a txg or not.
812 * The callback will be called after the transaction has been safely written
813 * to stable storage and will also be called if the dmu_tx is aborted.
814 * If there is any error which prevents the transaction from being committed to
815 * disk, the callback will be called with a value of error != 0.
817 typedef void dmu_tx_callback_func_t(void *dcb_data
, int error
);
819 void dmu_tx_callback_register(dmu_tx_t
*tx
, dmu_tx_callback_func_t
*dcb_func
,
823 * Free up the data blocks for a defined range of a file. If size is
824 * -1, the range from offset to end-of-file is freed.
826 int dmu_free_range(objset_t
*os
, uint64_t object
, uint64_t offset
,
827 uint64_t size
, dmu_tx_t
*tx
);
828 int dmu_free_long_range(objset_t
*os
, uint64_t object
, uint64_t offset
,
830 int dmu_free_long_object(objset_t
*os
, uint64_t object
);
833 * Convenience functions.
835 * Canfail routines will return 0 on success, or an errno if there is a
836 * nonrecoverable I/O error.
838 #define DMU_READ_PREFETCH 0 /* prefetch */
839 #define DMU_READ_NO_PREFETCH 1 /* don't prefetch */
840 #define DMU_READ_NO_DECRYPT 2 /* don't decrypt */
841 int dmu_read(objset_t
*os
, uint64_t object
, uint64_t offset
, uint64_t size
,
842 void *buf
, uint32_t flags
);
843 int dmu_read_by_dnode(dnode_t
*dn
, uint64_t offset
, uint64_t size
, void *buf
,
845 void dmu_write(objset_t
*os
, uint64_t object
, uint64_t offset
, uint64_t size
,
846 const void *buf
, dmu_tx_t
*tx
);
847 void dmu_write_by_dnode(dnode_t
*dn
, uint64_t offset
, uint64_t size
,
848 const void *buf
, dmu_tx_t
*tx
);
849 void dmu_prealloc(objset_t
*os
, uint64_t object
, uint64_t offset
, uint64_t size
,
851 int dmu_read_uio(objset_t
*os
, uint64_t object
, struct uio
*uio
, uint64_t size
);
852 int dmu_read_uio_dbuf(dmu_buf_t
*zdb
, struct uio
*uio
, uint64_t size
);
853 int dmu_read_uio_dnode(dnode_t
*dn
, struct uio
*uio
, uint64_t size
);
854 int dmu_write_uio(objset_t
*os
, uint64_t object
, struct uio
*uio
, uint64_t size
,
856 int dmu_write_uio_dbuf(dmu_buf_t
*zdb
, struct uio
*uio
, uint64_t size
,
858 int dmu_write_uio_dnode(dnode_t
*dn
, struct uio
*uio
, uint64_t size
,
860 int dmu_write_pages(objset_t
*os
, uint64_t object
, uint64_t offset
,
861 uint64_t size
, struct page
*pp
, dmu_tx_t
*tx
);
862 struct arc_buf
*dmu_request_arcbuf(dmu_buf_t
*handle
, int size
);
863 void dmu_return_arcbuf(struct arc_buf
*buf
);
864 int dmu_assign_arcbuf_by_dnode(dnode_t
*handle
, uint64_t offset
,
865 struct arc_buf
*buf
, dmu_tx_t
*tx
);
866 int dmu_assign_arcbuf_by_dbuf(dmu_buf_t
*handle
, uint64_t offset
,
867 struct arc_buf
*buf
, dmu_tx_t
*tx
);
868 void dmu_convert_to_raw(dmu_buf_t
*handle
, boolean_t byteorder
,
869 const uint8_t *salt
, const uint8_t *iv
, const uint8_t *mac
, dmu_tx_t
*tx
);
870 #define dmu_assign_arcbuf dmu_assign_arcbuf_by_dbuf
871 void dmu_copy_from_buf(objset_t
*os
, uint64_t object
, uint64_t offset
,
872 dmu_buf_t
*handle
, dmu_tx_t
*tx
);
873 int dmu_xuio_init(struct xuio
*uio
, int niov
);
874 void dmu_xuio_fini(struct xuio
*uio
);
875 int dmu_xuio_add(struct xuio
*uio
, struct arc_buf
*abuf
, offset_t off
,
877 int dmu_xuio_cnt(struct xuio
*uio
);
878 struct arc_buf
*dmu_xuio_arcbuf(struct xuio
*uio
, int i
);
879 void dmu_xuio_clear(struct xuio
*uio
, int i
);
880 void xuio_stat_wbuf_copied(void);
881 void xuio_stat_wbuf_nocopy(void);
883 extern boolean_t zfs_prefetch_disable
;
884 extern int zfs_max_recordsize
;
887 * Asynchronously try to read in the data.
889 void dmu_prefetch(objset_t
*os
, uint64_t object
, int64_t level
, uint64_t offset
,
890 uint64_t len
, enum zio_priority pri
);
892 typedef struct dmu_object_info
{
893 /* All sizes are in bytes unless otherwise indicated. */
894 uint32_t doi_data_block_size
;
895 uint32_t doi_metadata_block_size
;
896 dmu_object_type_t doi_type
;
897 dmu_object_type_t doi_bonus_type
;
898 uint64_t doi_bonus_size
;
899 uint8_t doi_indirection
; /* 2 = dnode->indirect->data */
900 uint8_t doi_checksum
;
901 uint8_t doi_compress
;
904 uint64_t doi_dnodesize
;
905 uint64_t doi_physical_blocks_512
; /* data + metadata, 512b blks */
906 uint64_t doi_max_offset
;
907 uint64_t doi_fill_count
; /* number of non-empty blocks */
910 typedef void arc_byteswap_func_t(void *buf
, size_t size
);
912 typedef struct dmu_object_type_info
{
913 dmu_object_byteswap_t ot_byteswap
;
914 boolean_t ot_metadata
;
915 boolean_t ot_dbuf_metadata_cache
;
916 boolean_t ot_encrypt
;
918 } dmu_object_type_info_t
;
920 typedef struct dmu_object_byteswap_info
{
921 arc_byteswap_func_t
*ob_func
;
923 } dmu_object_byteswap_info_t
;
925 extern const dmu_object_type_info_t dmu_ot
[DMU_OT_NUMTYPES
];
926 extern const dmu_object_byteswap_info_t dmu_ot_byteswap
[DMU_BSWAP_NUMFUNCS
];
929 * Get information on a DMU object.
931 * Return 0 on success or ENOENT if object is not allocated.
933 * If doi is NULL, just indicates whether the object exists.
935 int dmu_object_info(objset_t
*os
, uint64_t object
, dmu_object_info_t
*doi
);
936 /* Like dmu_object_info, but faster if you have a held dnode in hand. */
937 void dmu_object_info_from_dnode(dnode_t
*dn
, dmu_object_info_t
*doi
);
938 /* Like dmu_object_info, but faster if you have a held dbuf in hand. */
939 void dmu_object_info_from_db(dmu_buf_t
*db
, dmu_object_info_t
*doi
);
941 * Like dmu_object_info_from_db, but faster still when you only care about
942 * the size. This is specifically optimized for zfs_getattr().
944 void dmu_object_size_from_db(dmu_buf_t
*db
, uint32_t *blksize
,
945 u_longlong_t
*nblk512
);
947 void dmu_object_dnsize_from_db(dmu_buf_t
*db
, int *dnsize
);
949 typedef struct dmu_objset_stats
{
950 uint64_t dds_num_clones
; /* number of clones of this */
951 uint64_t dds_creation_txg
;
953 dmu_objset_type_t dds_type
;
954 uint8_t dds_is_snapshot
;
955 uint8_t dds_inconsistent
;
956 char dds_origin
[ZFS_MAX_DATASET_NAME_LEN
];
957 } dmu_objset_stats_t
;
960 * Get stats on a dataset.
962 void dmu_objset_fast_stat(objset_t
*os
, dmu_objset_stats_t
*stat
);
965 * Add entries to the nvlist for all the objset's properties. See
966 * zfs_prop_table[] and zfs(8) for details on the properties.
968 void dmu_objset_stats(objset_t
*os
, struct nvlist
*nv
);
971 * Get the space usage statistics for statvfs().
973 * refdbytes is the amount of space "referenced" by this objset.
974 * availbytes is the amount of space available to this objset, taking
975 * into account quotas & reservations, assuming that no other objsets
976 * use the space first. These values correspond to the 'referenced' and
977 * 'available' properties, described in the zfs(8) manpage.
979 * usedobjs and availobjs are the number of objects currently allocated,
982 void dmu_objset_space(objset_t
*os
, uint64_t *refdbytesp
, uint64_t *availbytesp
,
983 uint64_t *usedobjsp
, uint64_t *availobjsp
);
986 * The fsid_guid is a 56-bit ID that can change to avoid collisions.
987 * (Contrast with the ds_guid which is a 64-bit ID that will never
988 * change, so there is a small probability that it will collide.)
990 uint64_t dmu_objset_fsid_guid(objset_t
*os
);
993 * Get the [cm]time for an objset's snapshot dir
995 timestruc_t
dmu_objset_snap_cmtime(objset_t
*os
);
997 int dmu_objset_is_snapshot(objset_t
*os
);
999 extern struct spa
*dmu_objset_spa(objset_t
*os
);
1000 extern struct zilog
*dmu_objset_zil(objset_t
*os
);
1001 extern struct dsl_pool
*dmu_objset_pool(objset_t
*os
);
1002 extern struct dsl_dataset
*dmu_objset_ds(objset_t
*os
);
1003 extern void dmu_objset_name(objset_t
*os
, char *buf
);
1004 extern dmu_objset_type_t
dmu_objset_type(objset_t
*os
);
1005 extern uint64_t dmu_objset_id(objset_t
*os
);
1006 extern uint64_t dmu_objset_dnodesize(objset_t
*os
);
1007 extern zfs_sync_type_t
dmu_objset_syncprop(objset_t
*os
);
1008 extern zfs_logbias_op_t
dmu_objset_logbias(objset_t
*os
);
1009 extern int dmu_snapshot_list_next(objset_t
*os
, int namelen
, char *name
,
1010 uint64_t *id
, uint64_t *offp
, boolean_t
*case_conflict
);
1011 extern int dmu_snapshot_realname(objset_t
*os
, char *name
, char *real
,
1012 int maxlen
, boolean_t
*conflict
);
1013 extern int dmu_dir_list_next(objset_t
*os
, int namelen
, char *name
,
1014 uint64_t *idp
, uint64_t *offp
);
1016 typedef int objset_used_cb_t(dmu_object_type_t bonustype
,
1017 void *bonus
, uint64_t *userp
, uint64_t *groupp
, uint64_t *projectp
);
1018 extern void dmu_objset_register_type(dmu_objset_type_t ost
,
1019 objset_used_cb_t
*cb
);
1020 extern void dmu_objset_set_user(objset_t
*os
, void *user_ptr
);
1021 extern void *dmu_objset_get_user(objset_t
*os
);
1024 * Return the txg number for the given assigned transaction.
1026 uint64_t dmu_tx_get_txg(dmu_tx_t
*tx
);
1029 * Synchronous write.
1030 * If a parent zio is provided this function initiates a write on the
1031 * provided buffer as a child of the parent zio.
1032 * In the absence of a parent zio, the write is completed synchronously.
1033 * At write completion, blk is filled with the bp of the written block.
1034 * Note that while the data covered by this function will be on stable
1035 * storage when the write completes this new data does not become a
1036 * permanent part of the file until the associated transaction commits.
1040 * {zfs,zvol,ztest}_get_done() args
1042 typedef struct zgd
{
1043 struct lwb
*zgd_lwb
;
1044 struct blkptr
*zgd_bp
;
1046 struct locked_range
*zgd_lr
;
1050 typedef void dmu_sync_cb_t(zgd_t
*arg
, int error
);
1051 int dmu_sync(struct zio
*zio
, uint64_t txg
, dmu_sync_cb_t
*done
, zgd_t
*zgd
);
1054 * Find the next hole or data block in file starting at *off
1055 * Return found offset in *off. Return ESRCH for end of file.
1057 int dmu_offset_next(objset_t
*os
, uint64_t object
, boolean_t hole
,
1061 * Check if a DMU object has any dirty blocks. If so, sync out
1062 * all pending transaction groups. Otherwise, this function
1063 * does not alter DMU state. This could be improved to only sync
1064 * out the necessary transaction groups for this particular
1067 int dmu_object_wait_synced(objset_t
*os
, uint64_t object
);
1070 * Initial setup and final teardown.
1072 extern void dmu_init(void);
1073 extern void dmu_fini(void);
1075 typedef void (*dmu_traverse_cb_t
)(objset_t
*os
, void *arg
, struct blkptr
*bp
,
1076 uint64_t object
, uint64_t offset
, int len
);
1077 void dmu_traverse_objset(objset_t
*os
, uint64_t txg_start
,
1078 dmu_traverse_cb_t cb
, void *arg
);
1080 int dmu_diff(const char *tosnap_name
, const char *fromsnap_name
,
1081 struct vnode
*vp
, offset_t
*offp
);
1084 #define ZFS_CRC64_POLY 0xC96C5795D7870F42ULL /* ECMA-182, reflected form */
1085 extern uint64_t zfs_crc64_table
[256];
1091 #endif /* _SYS_DMU_H */