2.9
[glibc/nacl-glibc.git] / sysdeps / mach / hurd / net / if_arp.h
blobc0153c93a4628538993956719a969066aba1d4b2
1 /* Definitions for Address Resolution Protocol.
2 Copyright (C) 1997 Free Software Foundation, Inc.
3 This file is part of the GNU C Library.
4 Contributed by Ulrich Drepper <drepper@cygnus.com>, 1997.
6 The GNU C Library is free software; you can redistribute it and/or
7 modify it under the terms of the GNU Lesser General Public
8 License as published by the Free Software Foundation; either
9 version 2.1 of the License, or (at your option) any later version.
11 The GNU C Library is distributed in the hope that it will be useful,
12 but WITHOUT ANY WARRANTY; without even the implied warranty of
13 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
14 Lesser General Public License for more details.
16 You should have received a copy of the GNU Lesser General Public
17 License along with the GNU C Library; if not, write to the Free
18 Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
19 02111-1307 USA. */
21 /* Based on the 4.4BSD and Linux version of this file. */
23 #ifndef _NET_IF_ARP_H
25 #define _NET_IF_ARP_H 1
26 #include <sys/cdefs.h>
28 #include <sys/types.h>
29 #include <sys/socket.h>
31 __BEGIN_DECLS
33 /* Some internals from deep down in the kernel. */
34 #define MAX_ADDR_LEN 7
37 /* This structure defines an ethernet arp header. */
39 /* ARP protocol opcodes. */
40 #define ARPOP_REQUEST 1 /* ARP request. */
41 #define ARPOP_REPLY 2 /* ARP reply. */
42 #define ARPOP_RREQUEST 3 /* RARP request. */
43 #define ARPOP_RREPLY 4 /* RARP reply. */
45 /* See RFC 826 for protocol description. ARP packets are variable
46 in size; the arphdr structure defines the fixed-length portion.
47 Protocol type values are the same as those for 10 Mb/s Ethernet.
48 It is followed by the variable-sized fields ar_sha, arp_spa,
49 arp_tha and arp_tpa in that order, according to the lengths
50 specified. Field names used correspond to RFC 826. */
52 struct arphdr
54 unsigned short int ar_hrd; /* Format of hardware address. */
55 unsigned short int ar_pro; /* Format of protocol address. */
56 unsigned char ar_hln; /* Length of hardware address. */
57 unsigned char ar_pln; /* Length of protocol address. */
58 unsigned short int ar_op; /* ARP opcode (command). */
59 #if 0
60 /* Ethernet looks like this : This bit is variable sized
61 however... */
62 unsigned char __ar_sha[ETH_ALEN]; /* Sender hardware address. */
63 unsigned char __ar_sip[4]; /* Sender IP address. */
64 unsigned char __ar_tha[ETH_ALEN]; /* Target hardware address. */
65 unsigned char __ar_tip[4]; /* Target IP address. */
66 #endif
70 /* ARP protocol HARDWARE identifiers. */
71 #define ARPHRD_NETROM 0 /* From KA9Q: NET/ROM pseudo. */
72 #define ARPHRD_ETHER 1 /* Ethernet 10Mbps. */
73 #define ARPHRD_EETHER 2 /* Experimental Ethernet. */
74 #define ARPHRD_AX25 3 /* AX.25 Level 2. */
75 #define ARPHRD_PRONET 4 /* PROnet token ring. */
76 #define ARPHRD_CHAOS 5 /* Chaosnet. */
77 #define ARPHRD_IEEE802 6 /* IEEE 802.2 Ethernet/TR/TB. */
78 #define ARPHRD_ARCNET 7 /* ARCnet. */
79 #define ARPHRD_APPLETLK 8 /* APPLEtalk. */
80 #define ARPHRD_DLCI 15 /* Frame Relay DLCI. */
81 #define ARPHRD_METRICOM 23 /* Metricom STRIP (new IANA id). */
83 /* Dummy types for non ARP hardware */
84 #define ARPHRD_SLIP 256
85 #define ARPHRD_CSLIP 257
86 #define ARPHRD_SLIP6 258
87 #define ARPHRD_CSLIP6 259
88 #define ARPHRD_RSRVD 260 /* Notional KISS type. */
89 #define ARPHRD_ADAPT 264
90 #define ARPHRD_ROSE 270
91 #define ARPHRD_X25 271 /* CCITT X.25. */
92 #define ARPHRD_PPP 512
93 #define ARPHRD_HDLC 513 /* (Cisco) HDLC. */
94 #define ARPHRD_LAPB 516 /* LAPB. */
96 #define ARPHRD_TUNNEL 768 /* IPIP tunnel. */
97 #define ARPHRD_TUNNEL6 769 /* IPIP6 tunnel. */
98 #define ARPHRD_FRAD 770 /* Frame Relay Access Device. */
99 #define ARPHRD_SKIP 771 /* SKIP vif. */
100 #define ARPHRD_LOOPBACK 772 /* Loopback device. */
101 #define ARPHRD_LOCALTLK 773 /* Localtalk device. */
102 #define ARPHRD_FDDI 774 /* Fiber Distributed Data Interface. */
103 #define ARPHRD_BIF 775 /* AP1000 BIF. */
104 #define ARPHRD_SIT 776 /* sit0 device - IPv6-in-IPv4. */
107 /* ARP ioctl request. */
108 struct arpreq
110 struct sockaddr arp_pa; /* Protocol address. */
111 struct sockaddr arp_ha; /* Hardware address. */
112 int arp_flags; /* Flags. */
113 struct sockaddr arp_netmask; /* Netmask (only for proxy arps). */
114 char arp_dev[16];
117 /* ARP Flag values. */
118 #define ATF_COM 0x02 /* Completed entry (ha valid). */
119 #define ATF_PERM 0x04 /* Permanent entry. */
120 #define ATF_PUBL 0x08 /* Publish entry. */
121 #define ATF_USETRAILERS 0x10 /* Has requested trailers. */
122 #define ATF_NETMASK 0x20 /* Want to use a netmask (only
123 for proxy entries). */
124 #define ATF_DONTPUB 0x40 /* Don't answer this addresses. */
125 #define ATF_MAGIC 0x80 /* Automatically added entry. */
128 /* Support for the user space arp daemon, arpd. */
129 #define ARPD_UPDATE 0x01
130 #define ARPD_LOOKUP 0x02
131 #define ARPD_FLUSH 0x03
133 struct arpd_request
135 unsigned short int req; /* Request type. */
136 u_int32_t ip; /* IP address of entry. */
137 unsigned long int dev; /* Device entry is tied to. */
138 unsigned long int stamp;
139 unsigned long int updated;
140 unsigned char ha[MAX_ADDR_LEN]; /* Hardware address. */
143 __END_DECLS
145 #endif /* net/if_arp.h */