ALSA: initial work on the Focusrite SaffireLE driver.

[firewire-audio.git] / kernel / rcutree_plugin.h

/*
 * Read-Copy Update mechanism for mutual exclusion (tree-based version)
 * Internal non-public definitions that provide either classic
 * or preemptable semantics.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
 *
 * Copyright Red Hat, 2009
 * Copyright IBM Corporation, 2009
 *
 * Author: Ingo Molnar <mingo@elte.hu>
 *         Paul E. McKenney <paulmck@linux.vnet.ibm.com>
 */

#include <linux/delay.h>
#include <linux/stop_machine.h>

/*
 * Check the RCU kernel configuration parameters and print informative
 * messages about anything out of the ordinary.  If you like #ifdef, you
 * will love this function.
 */
static void __init rcu_bootup_announce_oddness(void)
{
#ifdef CONFIG_RCU_TRACE
        printk(KERN_INFO "\tRCU debugfs-based tracing is enabled.\n");
#endif
#if (defined(CONFIG_64BIT) && CONFIG_RCU_FANOUT != 64) || (!defined(CONFIG_64BIT) && CONFIG_RCU_FANOUT != 32)
        printk(KERN_INFO "\tCONFIG_RCU_FANOUT set to non-default value of %d\n",
               CONFIG_RCU_FANOUT);
#endif
#ifdef CONFIG_RCU_FANOUT_EXACT
        printk(KERN_INFO "\tHierarchical RCU autobalancing is disabled.\n");
#endif
#ifdef CONFIG_RCU_FAST_NO_HZ
        printk(KERN_INFO
               "\tRCU dyntick-idle grace-period acceleration is enabled.\n");
#endif
#ifdef CONFIG_PROVE_RCU
        printk(KERN_INFO "\tRCU lockdep checking is enabled.\n");
#endif
#ifdef CONFIG_RCU_TORTURE_TEST_RUNNABLE
        printk(KERN_INFO "\tRCU torture testing starts during boot.\n");
#endif
#ifndef CONFIG_RCU_CPU_STALL_DETECTOR
        printk(KERN_INFO
               "\tRCU-based detection of stalled CPUs is disabled.\n");
#endif
#if defined(CONFIG_TREE_PREEMPT_RCU) && !defined(CONFIG_RCU_CPU_STALL_VERBOSE)
        printk(KERN_INFO "\tVerbose stalled-CPUs detection is disabled.\n");
#endif
#if NUM_RCU_LVL_4 != 0
        printk(KERN_INFO "\tExperimental four-level hierarchy is enabled.\n");
#endif
}

#ifdef CONFIG_TREE_PREEMPT_RCU

struct rcu_state rcu_preempt_state = RCU_STATE_INITIALIZER(rcu_preempt_state);
DEFINE_PER_CPU(struct rcu_data, rcu_preempt_data);

static int rcu_preempted_readers_exp(struct rcu_node *rnp);

/*
 * Tell them what RCU they are running.
 */
static void __init rcu_bootup_announce(void)
{
        printk(KERN_INFO "Preemptable hierarchical RCU implementation.\n");
        rcu_bootup_announce_oddness();
}

/*
 * Return the number of RCU-preempt batches processed thus far
 * for debug and statistics.
 */
long rcu_batches_completed_preempt(void)
{
        return rcu_preempt_state.completed;
}
EXPORT_SYMBOL_GPL(rcu_batches_completed_preempt);

/*
 * Return the number of RCU batches processed thus far for debug & stats.
 */
long rcu_batches_completed(void)
{
        return rcu_batches_completed_preempt();
}
EXPORT_SYMBOL_GPL(rcu_batches_completed);

/*
 * Force a quiescent state for preemptible RCU.
 */
void rcu_force_quiescent_state(void)
{
        force_quiescent_state(&rcu_preempt_state, 0);
}
EXPORT_SYMBOL_GPL(rcu_force_quiescent_state);

/*
 * Record a preemptable-RCU quiescent state for the specified CPU.  Note
 * that this just means that the task currently running on the CPU is
 * not in a quiescent state.  There might be any number of tasks blocked
 * while in an RCU read-side critical section.
 *
 * Unlike the other rcu_*_qs() functions, callers to this function
 * must disable irqs in order to protect the assignment to
 * ->rcu_read_unlock_special.
 */
static void rcu_preempt_qs(int cpu)
{
        struct rcu_data *rdp = &per_cpu(rcu_preempt_data, cpu);

        rdp->passed_quiesc_completed = rdp->gpnum - 1;
        barrier();
        rdp->passed_quiesc = 1;
        current->rcu_read_unlock_special &= ~RCU_READ_UNLOCK_NEED_QS;
}

/*
 * We have entered the scheduler, and the current task might soon be
 * context-switched away from.  If this task is in an RCU read-side
 * critical section, we will no longer be able to rely on the CPU to
 * record that fact, so we enqueue the task on the appropriate entry
 * of the blocked_tasks[] array.  The task will dequeue itself when
 * it exits the outermost enclosing RCU read-side critical section.
 * Therefore, the current grace period cannot be permitted to complete
 * until the blocked_tasks[] entry indexed by the low-order bit of
 * rnp->gpnum empties.
 *
 * Caller must disable preemption.
 */
static void rcu_preempt_note_context_switch(int cpu)
{
        struct task_struct *t = current;
        unsigned long flags;
        int phase;
        struct rcu_data *rdp;
        struct rcu_node *rnp;

        if (t->rcu_read_lock_nesting &&
            (t->rcu_read_unlock_special & RCU_READ_UNLOCK_BLOCKED) == 0) {

                /* Possibly blocking in an RCU read-side critical section. */
                rdp = per_cpu_ptr(rcu_preempt_state.rda, cpu);
                rnp = rdp->mynode;
                raw_spin_lock_irqsave(&rnp->lock, flags);
                t->rcu_read_unlock_special |= RCU_READ_UNLOCK_BLOCKED;
                t->rcu_blocked_node = rnp;

                /*
                 * If this CPU has already checked in, then this task
                 * will hold up the next grace period rather than the
                 * current grace period.  Queue the task accordingly.
                 * If the task is queued for the current grace period
                 * (i.e., this CPU has not yet passed through a quiescent
                 * state for the current grace period), then as long
                 * as that task remains queued, the current grace period
                 * cannot end.
                 *
                 * But first, note that the current CPU must still be
                 * on line!
                 */
                WARN_ON_ONCE((rdp->grpmask & rnp->qsmaskinit) == 0);
                WARN_ON_ONCE(!list_empty(&t->rcu_node_entry));
                phase = (rnp->gpnum + !(rnp->qsmask & rdp->grpmask)) & 0x1;
                list_add(&t->rcu_node_entry, &rnp->blocked_tasks[phase]);
                raw_spin_unlock_irqrestore(&rnp->lock, flags);
        }

        /*
         * Either we were not in an RCU read-side critical section to
         * begin with, or we have now recorded that critical section
         * globally.  Either way, we can now note a quiescent state
         * for this CPU.  Again, if we were in an RCU read-side critical
         * section, and if that critical section was blocking the current
         * grace period, then the fact that the task has been enqueued
         * means that we continue to block the current grace period.
         */
        local_irq_save(flags);
        rcu_preempt_qs(cpu);
        local_irq_restore(flags);
}

/*
 * Tree-preemptable RCU implementation for rcu_read_lock().
 * Just increment ->rcu_read_lock_nesting, shared state will be updated
 * if we block.
 */
void __rcu_read_lock(void)
{
        current->rcu_read_lock_nesting++;
        barrier();  /* needed if we ever invoke rcu_read_lock in rcutree.c */
}
EXPORT_SYMBOL_GPL(__rcu_read_lock);

/*
 * Check for preempted RCU readers blocking the current grace period
 * for the specified rcu_node structure.  If the caller needs a reliable
 * answer, it must hold the rcu_node's ->lock.
 */
static int rcu_preempted_readers(struct rcu_node *rnp)
{
        int phase = rnp->gpnum & 0x1;

        return !list_empty(&rnp->blocked_tasks[phase]) ||
               !list_empty(&rnp->blocked_tasks[phase + 2]);
}

/*
 * Record a quiescent state for all tasks that were previously queued
 * on the specified rcu_node structure and that were blocking the current
 * RCU grace period.  The caller must hold the specified rnp->lock with
 * irqs disabled, and this lock is released upon return, but irqs remain
 * disabled.
 */
static void rcu_report_unblock_qs_rnp(struct rcu_node *rnp, unsigned long flags)
        __releases(rnp->lock)
{
        unsigned long mask;
        struct rcu_node *rnp_p;

        if (rnp->qsmask != 0 || rcu_preempted_readers(rnp)) {
                raw_spin_unlock_irqrestore(&rnp->lock, flags);
                return;  /* Still need more quiescent states! */
        }

        rnp_p = rnp->parent;
        if (rnp_p == NULL) {
                /*
                 * Either there is only one rcu_node in the tree,
                 * or tasks were kicked up to root rcu_node due to
                 * CPUs going offline.
                 */
                rcu_report_qs_rsp(&rcu_preempt_state, flags);
                return;
        }

        /* Report up the rest of the hierarchy. */
        mask = rnp->grpmask;
        raw_spin_unlock(&rnp->lock);    /* irqs remain disabled. */
        raw_spin_lock(&rnp_p->lock);    /* irqs already disabled. */
        rcu_report_qs_rnp(mask, &rcu_preempt_state, rnp_p, flags);
}

/*
 * Handle special cases during rcu_read_unlock(), such as needing to
 * notify RCU core processing or task having blocked during the RCU
 * read-side critical section.
 */
static void rcu_read_unlock_special(struct task_struct *t)
{
        int empty;
        int empty_exp;
        unsigned long flags;
        struct rcu_node *rnp;
        int special;

        /* NMI handlers cannot block and cannot safely manipulate state. */
        if (in_nmi())
                return;

        local_irq_save(flags);

        /*
         * If RCU core is waiting for this CPU to exit critical section,
         * let it know that we have done so.
         */
        special = t->rcu_read_unlock_special;
        if (special & RCU_READ_UNLOCK_NEED_QS) {
                rcu_preempt_qs(smp_processor_id());
        }

        /* Hardware IRQ handlers cannot block. */
        if (in_irq()) {
                local_irq_restore(flags);
                return;
        }

        /* Clean up if blocked during RCU read-side critical section. */
        if (special & RCU_READ_UNLOCK_BLOCKED) {
                t->rcu_read_unlock_special &= ~RCU_READ_UNLOCK_BLOCKED;

                /*
                 * Remove this task from the list it blocked on.  The
                 * task can migrate while we acquire the lock, but at
                 * most one time.  So at most two passes through loop.
                 */
                for (;;) {
                        rnp = t->rcu_blocked_node;
                        raw_spin_lock(&rnp->lock);  /* irqs already disabled. */
                        if (rnp == t->rcu_blocked_node)
                                break;
                        raw_spin_unlock(&rnp->lock); /* irqs remain disabled. */
                }
                empty = !rcu_preempted_readers(rnp);
                empty_exp = !rcu_preempted_readers_exp(rnp);
                smp_mb(); /* ensure expedited fastpath sees end of RCU c-s. */
                list_del_init(&t->rcu_node_entry);
                t->rcu_blocked_node = NULL;

                /*
                 * If this was the last task on the current list, and if
                 * we aren't waiting on any CPUs, report the quiescent state.
                 * Note that rcu_report_unblock_qs_rnp() releases rnp->lock.
                 */
                if (empty)
                        raw_spin_unlock_irqrestore(&rnp->lock, flags);
                else
                        rcu_report_unblock_qs_rnp(rnp, flags);

                /*
                 * If this was the last task on the expedited lists,
                 * then we need to report up the rcu_node hierarchy.
                 */
                if (!empty_exp && !rcu_preempted_readers_exp(rnp))
                        rcu_report_exp_rnp(&rcu_preempt_state, rnp);
        } else {
                local_irq_restore(flags);
        }
}

/*
 * Tree-preemptable RCU implementation for rcu_read_unlock().
 * Decrement ->rcu_read_lock_nesting.  If the result is zero (outermost
 * rcu_read_unlock()) and ->rcu_read_unlock_special is non-zero, then
 * invoke rcu_read_unlock_special() to clean up after a context switch
 * in an RCU read-side critical section and other special cases.
 */
void __rcu_read_unlock(void)
{
        struct task_struct *t = current;

        barrier();  /* needed if we ever invoke rcu_read_unlock in rcutree.c */
        --t->rcu_read_lock_nesting;
        barrier();  /* decrement before load of ->rcu_read_unlock_special */
        if (t->rcu_read_lock_nesting == 0 &&
            unlikely(ACCESS_ONCE(t->rcu_read_unlock_special)))
                rcu_read_unlock_special(t);
#ifdef CONFIG_PROVE_LOCKING
        WARN_ON_ONCE(ACCESS_ONCE(t->rcu_read_lock_nesting) < 0);
#endif /* #ifdef CONFIG_PROVE_LOCKING */
}
EXPORT_SYMBOL_GPL(__rcu_read_unlock);

#ifdef CONFIG_RCU_CPU_STALL_DETECTOR

#ifdef CONFIG_RCU_CPU_STALL_VERBOSE

/*
 * Dump detailed information for all tasks blocking the current RCU
 * grace period on the specified rcu_node structure.
 */
static void rcu_print_detail_task_stall_rnp(struct rcu_node *rnp)
{
        unsigned long flags;
        struct list_head *lp;
        int phase;
        struct task_struct *t;

        if (rcu_preempted_readers(rnp)) {
                raw_spin_lock_irqsave(&rnp->lock, flags);
                phase = rnp->gpnum & 0x1;
                lp = &rnp->blocked_tasks[phase];
                list_for_each_entry(t, lp, rcu_node_entry)
                        sched_show_task(t);
                raw_spin_unlock_irqrestore(&rnp->lock, flags);
        }
}

/*
 * Dump detailed information for all tasks blocking the current RCU
 * grace period.
 */
static void rcu_print_detail_task_stall(struct rcu_state *rsp)
{
        struct rcu_node *rnp = rcu_get_root(rsp);

        rcu_print_detail_task_stall_rnp(rnp);
        rcu_for_each_leaf_node(rsp, rnp)
                rcu_print_detail_task_stall_rnp(rnp);
}

#else /* #ifdef CONFIG_RCU_CPU_STALL_VERBOSE */

static void rcu_print_detail_task_stall(struct rcu_state *rsp)
{
}

#endif /* #else #ifdef CONFIG_RCU_CPU_STALL_VERBOSE */

/*
 * Scan the current list of tasks blocked within RCU read-side critical
 * sections, printing out the tid of each.
 */
static void rcu_print_task_stall(struct rcu_node *rnp)
{
        struct list_head *lp;
        int phase;
        struct task_struct *t;

        if (rcu_preempted_readers(rnp)) {
                phase = rnp->gpnum & 0x1;
                lp = &rnp->blocked_tasks[phase];
                list_for_each_entry(t, lp, rcu_node_entry)
                        printk(" P%d", t->pid);
        }
}

/*
 * Suppress preemptible RCU's CPU stall warnings by pushing the
 * time of the next stall-warning message comfortably far into the
 * future.
 */
static void rcu_preempt_stall_reset(void)
{
        rcu_preempt_state.jiffies_stall = jiffies + ULONG_MAX / 2;
}

#endif /* #ifdef CONFIG_RCU_CPU_STALL_DETECTOR */

/*
 * Check that the list of blocked tasks for the newly completed grace
 * period is in fact empty.  It is a serious bug to complete a grace
 * period that still has RCU readers blocked!  This function must be
 * invoked -before- updating this rnp's ->gpnum, and the rnp's ->lock
 * must be held by the caller.
 */
static void rcu_preempt_check_blocked_tasks(struct rcu_node *rnp)
{
        WARN_ON_ONCE(rcu_preempted_readers(rnp));
        WARN_ON_ONCE(rnp->qsmask);
}

#ifdef CONFIG_HOTPLUG_CPU

/*
 * Handle tasklist migration for case in which all CPUs covered by the
 * specified rcu_node have gone offline.  Move them up to the root
 * rcu_node.  The reason for not just moving them to the immediate
 * parent is to remove the need for rcu_read_unlock_special() to
 * make more than two attempts to acquire the target rcu_node's lock.
 * Returns true if there were tasks blocking the current RCU grace
 * period.
 *
 * Returns 1 if there was previously a task blocking the current grace
 * period on the specified rcu_node structure.
 *
 * The caller must hold rnp->lock with irqs disabled.
 */
static int rcu_preempt_offline_tasks(struct rcu_state *rsp,
                                     struct rcu_node *rnp,
                                     struct rcu_data *rdp)
{
        int i;
        struct list_head *lp;
        struct list_head *lp_root;
        int retval = 0;
        struct rcu_node *rnp_root = rcu_get_root(rsp);
        struct task_struct *tp;

        if (rnp == rnp_root) {
                WARN_ONCE(1, "Last CPU thought to be offlined?");
                return 0;  /* Shouldn't happen: at least one CPU online. */
        }
        WARN_ON_ONCE(rnp != rdp->mynode &&
                     (!list_empty(&rnp->blocked_tasks[0]) ||
                      !list_empty(&rnp->blocked_tasks[1]) ||
                      !list_empty(&rnp->blocked_tasks[2]) ||
                      !list_empty(&rnp->blocked_tasks[3])));

        /*
         * Move tasks up to root rcu_node.  Rely on the fact that the
         * root rcu_node can be at most one ahead of the rest of the
         * rcu_nodes in terms of gp_num value.  This fact allows us to
         * move the blocked_tasks[] array directly, element by element.
         */
        if (rcu_preempted_readers(rnp))
                retval |= RCU_OFL_TASKS_NORM_GP;
        if (rcu_preempted_readers_exp(rnp))
                retval |= RCU_OFL_TASKS_EXP_GP;
        for (i = 0; i < 4; i++) {
                lp = &rnp->blocked_tasks[i];
                lp_root = &rnp_root->blocked_tasks[i];
                while (!list_empty(lp)) {
                        tp = list_entry(lp->next, typeof(*tp), rcu_node_entry);
                        raw_spin_lock(&rnp_root->lock); /* irqs already disabled */
                        list_del(&tp->rcu_node_entry);
                        tp->rcu_blocked_node = rnp_root;
                        list_add(&tp->rcu_node_entry, lp_root);
                        raw_spin_unlock(&rnp_root->lock); /* irqs remain disabled */
                }
        }
        return retval;
}

/*
 * Do CPU-offline processing for preemptable RCU.
 */
static void rcu_preempt_offline_cpu(int cpu)
{
        __rcu_offline_cpu(cpu, &rcu_preempt_state);
}

#endif /* #ifdef CONFIG_HOTPLUG_CPU */

/*
 * Check for a quiescent state from the current CPU.  When a task blocks,
 * the task is recorded in the corresponding CPU's rcu_node structure,
 * which is checked elsewhere.
 *
 * Caller must disable hard irqs.
 */
static void rcu_preempt_check_callbacks(int cpu)
{
        struct task_struct *t = current;

        if (t->rcu_read_lock_nesting == 0) {
                rcu_preempt_qs(cpu);
                return;
        }
        if (per_cpu(rcu_preempt_data, cpu).qs_pending)
                t->rcu_read_unlock_special |= RCU_READ_UNLOCK_NEED_QS;
}

/*
 * Process callbacks for preemptable RCU.
 */
static void rcu_preempt_process_callbacks(void)
{
        __rcu_process_callbacks(&rcu_preempt_state,
                                &__get_cpu_var(rcu_preempt_data));
}

/*
 * Queue a preemptable-RCU callback for invocation after a grace period.
 */
void call_rcu(struct rcu_head *head, void (*func)(struct rcu_head *rcu))
{
        __call_rcu(head, func, &rcu_preempt_state);
}
EXPORT_SYMBOL_GPL(call_rcu);

/**
 * synchronize_rcu - wait until a grace period has elapsed.
 *
 * Control will return to the caller some time after a full grace
 * period has elapsed, in other words after all currently executing RCU
 * read-side critical sections have completed.  Note, however, that
 * upon return from synchronize_rcu(), the caller might well be executing
 * concurrently with new RCU read-side critical sections that began while
 * synchronize_rcu() was waiting.  RCU read-side critical sections are
 * delimited by rcu_read_lock() and rcu_read_unlock(), and may be nested.
 */
void synchronize_rcu(void)
{
        struct rcu_synchronize rcu;

        if (!rcu_scheduler_active)
                return;

        init_rcu_head_on_stack(&rcu.head);
        init_completion(&rcu.completion);
        /* Will wake me after RCU finished. */
        call_rcu(&rcu.head, wakeme_after_rcu);
        /* Wait for it. */
        wait_for_completion(&rcu.completion);
        destroy_rcu_head_on_stack(&rcu.head);
}
EXPORT_SYMBOL_GPL(synchronize_rcu);

static DECLARE_WAIT_QUEUE_HEAD(sync_rcu_preempt_exp_wq);
static long sync_rcu_preempt_exp_count;
static DEFINE_MUTEX(sync_rcu_preempt_exp_mutex);

/*
 * Return non-zero if there are any tasks in RCU read-side critical
 * sections blocking the current preemptible-RCU expedited grace period.
 * If there is no preemptible-RCU expedited grace period currently in
 * progress, returns zero unconditionally.
 */
static int rcu_preempted_readers_exp(struct rcu_node *rnp)
{
        return !list_empty(&rnp->blocked_tasks[2]) ||
               !list_empty(&rnp->blocked_tasks[3]);
}

/*
 * return non-zero if there is no RCU expedited grace period in progress
 * for the specified rcu_node structure, in other words, if all CPUs and
 * tasks covered by the specified rcu_node structure have done their bit
 * for the current expedited grace period.  Works only for preemptible
 * RCU -- other RCU implementation use other means.
 *
 * Caller must hold sync_rcu_preempt_exp_mutex.
 */
static int sync_rcu_preempt_exp_done(struct rcu_node *rnp)
{
        return !rcu_preempted_readers_exp(rnp) &&
               ACCESS_ONCE(rnp->expmask) == 0;
}

/*
 * Report the exit from RCU read-side critical section for the last task
 * that queued itself during or before the current expedited preemptible-RCU
 * grace period.  This event is reported either to the rcu_node structure on
 * which the task was queued or to one of that rcu_node structure's ancestors,
 * recursively up the tree.  (Calm down, calm down, we do the recursion
 * iteratively!)
 *
 * Caller must hold sync_rcu_preempt_exp_mutex.
 */
static void rcu_report_exp_rnp(struct rcu_state *rsp, struct rcu_node *rnp)
{
        unsigned long flags;
        unsigned long mask;

        raw_spin_lock_irqsave(&rnp->lock, flags);
        for (;;) {
                if (!sync_rcu_preempt_exp_done(rnp))
                        break;
                if (rnp->parent == NULL) {
                        wake_up(&sync_rcu_preempt_exp_wq);
                        break;
                }
                mask = rnp->grpmask;
                raw_spin_unlock(&rnp->lock); /* irqs remain disabled */
                rnp = rnp->parent;
                raw_spin_lock(&rnp->lock); /* irqs already disabled */
                rnp->expmask &= ~mask;
        }
        raw_spin_unlock_irqrestore(&rnp->lock, flags);
}

/*
 * Snapshot the tasks blocking the newly started preemptible-RCU expedited
 * grace period for the specified rcu_node structure.  If there are no such
 * tasks, report it up the rcu_node hierarchy.
 *
 * Caller must hold sync_rcu_preempt_exp_mutex and rsp->onofflock.
 */
static void
sync_rcu_preempt_exp_init(struct rcu_state *rsp, struct rcu_node *rnp)
{
        int must_wait;

        raw_spin_lock(&rnp->lock); /* irqs already disabled */
        list_splice_init(&rnp->blocked_tasks[0], &rnp->blocked_tasks[2]);
        list_splice_init(&rnp->blocked_tasks[1], &rnp->blocked_tasks[3]);
        must_wait = rcu_preempted_readers_exp(rnp);
        raw_spin_unlock(&rnp->lock); /* irqs remain disabled */
        if (!must_wait)
                rcu_report_exp_rnp(rsp, rnp);
}

/*
 * Wait for an rcu-preempt grace period, but expedite it.  The basic idea
 * is to invoke synchronize_sched_expedited() to push all the tasks to
 * the ->blocked_tasks[] lists, move all entries from the first set of
 * ->blocked_tasks[] lists to the second set, and finally wait for this
 * second set to drain.
 */
void synchronize_rcu_expedited(void)
{
        unsigned long flags;
        struct rcu_node *rnp;
        struct rcu_state *rsp = &rcu_preempt_state;
        long snap;
        int trycount = 0;

        smp_mb(); /* Caller's modifications seen first by other CPUs. */
        snap = ACCESS_ONCE(sync_rcu_preempt_exp_count) + 1;
        smp_mb(); /* Above access cannot bleed into critical section. */

        /*
         * Acquire lock, falling back to synchronize_rcu() if too many
         * lock-acquisition failures.  Of course, if someone does the
         * expedited grace period for us, just leave.
         */
        while (!mutex_trylock(&sync_rcu_preempt_exp_mutex)) {
                if (trycount++ < 10)
                        udelay(trycount * num_online_cpus());
                else {
                        synchronize_rcu();
                        return;
                }
                if ((ACCESS_ONCE(sync_rcu_preempt_exp_count) - snap) > 0)
                        goto mb_ret; /* Others did our work for us. */
        }
        if ((ACCESS_ONCE(sync_rcu_preempt_exp_count) - snap) > 0)
                goto unlock_mb_ret; /* Others did our work for us. */

        /* force all RCU readers onto blocked_tasks[]. */
        synchronize_sched_expedited();

        raw_spin_lock_irqsave(&rsp->onofflock, flags);

        /* Initialize ->expmask for all non-leaf rcu_node structures. */
        rcu_for_each_nonleaf_node_breadth_first(rsp, rnp) {
                raw_spin_lock(&rnp->lock); /* irqs already disabled. */
                rnp->expmask = rnp->qsmaskinit;
                raw_spin_unlock(&rnp->lock); /* irqs remain disabled. */
        }

        /* Snapshot current state of ->blocked_tasks[] lists. */
        rcu_for_each_leaf_node(rsp, rnp)
                sync_rcu_preempt_exp_init(rsp, rnp);
        if (NUM_RCU_NODES > 1)
                sync_rcu_preempt_exp_init(rsp, rcu_get_root(rsp));

        raw_spin_unlock_irqrestore(&rsp->onofflock, flags);

        /* Wait for snapshotted ->blocked_tasks[] lists to drain. */
        rnp = rcu_get_root(rsp);
        wait_event(sync_rcu_preempt_exp_wq,
                   sync_rcu_preempt_exp_done(rnp));

        /* Clean up and exit. */
        smp_mb(); /* ensure expedited GP seen before counter increment. */
        ACCESS_ONCE(sync_rcu_preempt_exp_count)++;
unlock_mb_ret:
        mutex_unlock(&sync_rcu_preempt_exp_mutex);
mb_ret:
        smp_mb(); /* ensure subsequent action seen after grace period. */
}
EXPORT_SYMBOL_GPL(synchronize_rcu_expedited);

/*
 * Check to see if there is any immediate preemptable-RCU-related work
 * to be done.
 */
static int rcu_preempt_pending(int cpu)
{
        return __rcu_pending(&rcu_preempt_state,
                             &per_cpu(rcu_preempt_data, cpu));
}

/*
 * Does preemptable RCU need the CPU to stay out of dynticks mode?
 */
static int rcu_preempt_needs_cpu(int cpu)
{
        return !!per_cpu(rcu_preempt_data, cpu).nxtlist;
}

/**
 * rcu_barrier - Wait until all in-flight call_rcu() callbacks complete.
 */
void rcu_barrier(void)
{
        _rcu_barrier(&rcu_preempt_state, call_rcu);
}
EXPORT_SYMBOL_GPL(rcu_barrier);

/*
 * Initialize preemptable RCU's per-CPU data.
 */
static void __cpuinit rcu_preempt_init_percpu_data(int cpu)
{
        rcu_init_percpu_data(cpu, &rcu_preempt_state, 1);
}

/*
 * Move preemptable RCU's callbacks from dying CPU to other online CPU.
 */
static void rcu_preempt_send_cbs_to_online(void)
{
        rcu_send_cbs_to_online(&rcu_preempt_state);
}

/*
 * Initialize preemptable RCU's state structures.
 */
static void __init __rcu_init_preempt(void)
{
        rcu_init_one(&rcu_preempt_state, &rcu_preempt_data);
}

/*
 * Check for a task exiting while in a preemptable-RCU read-side
 * critical section, clean up if so.  No need to issue warnings,
 * as debug_check_no_locks_held() already does this if lockdep
 * is enabled.
 */
void exit_rcu(void)
{
        struct task_struct *t = current;

        if (t->rcu_read_lock_nesting == 0)
                return;
        t->rcu_read_lock_nesting = 1;
        rcu_read_unlock();
}

#else /* #ifdef CONFIG_TREE_PREEMPT_RCU */

/*
 * Tell them what RCU they are running.
 */
static void __init rcu_bootup_announce(void)
{
        printk(KERN_INFO "Hierarchical RCU implementation.\n");
        rcu_bootup_announce_oddness();
}

/*
 * Return the number of RCU batches processed thus far for debug & stats.
 */
long rcu_batches_completed(void)
{
        return rcu_batches_completed_sched();
}
EXPORT_SYMBOL_GPL(rcu_batches_completed);

/*
 * Force a quiescent state for RCU, which, because there is no preemptible
 * RCU, becomes the same as rcu-sched.
 */
void rcu_force_quiescent_state(void)
{
        rcu_sched_force_quiescent_state();
}
EXPORT_SYMBOL_GPL(rcu_force_quiescent_state);

/*
 * Because preemptable RCU does not exist, we never have to check for
 * CPUs being in quiescent states.
 */
static void rcu_preempt_note_context_switch(int cpu)
{
}

/*
 * Because preemptable RCU does not exist, there are never any preempted
 * RCU readers.
 */
static int rcu_preempted_readers(struct rcu_node *rnp)
{
        return 0;
}

#ifdef CONFIG_HOTPLUG_CPU

/* Because preemptible RCU does not exist, no quieting of tasks. */
static void rcu_report_unblock_qs_rnp(struct rcu_node *rnp, unsigned long flags)
{
        raw_spin_unlock_irqrestore(&rnp->lock, flags);
}

#endif /* #ifdef CONFIG_HOTPLUG_CPU */

#ifdef CONFIG_RCU_CPU_STALL_DETECTOR

/*
 * Because preemptable RCU does not exist, we never have to check for
 * tasks blocked within RCU read-side critical sections.
 */
static void rcu_print_detail_task_stall(struct rcu_state *rsp)
{
}

/*
 * Because preemptable RCU does not exist, we never have to check for
 * tasks blocked within RCU read-side critical sections.
 */
static void rcu_print_task_stall(struct rcu_node *rnp)
{
}

/*
 * Because preemptible RCU does not exist, there is no need to suppress
 * its CPU stall warnings.
 */
static void rcu_preempt_stall_reset(void)
{
}

#endif /* #ifdef CONFIG_RCU_CPU_STALL_DETECTOR */

/*
 * Because there is no preemptable RCU, there can be no readers blocked,
 * so there is no need to check for blocked tasks.  So check only for
 * bogus qsmask values.
 */
static void rcu_preempt_check_blocked_tasks(struct rcu_node *rnp)
{
        WARN_ON_ONCE(rnp->qsmask);
}

#ifdef CONFIG_HOTPLUG_CPU

/*
 * Because preemptable RCU does not exist, it never needs to migrate
 * tasks that were blocked within RCU read-side critical sections, and
 * such non-existent tasks cannot possibly have been blocking the current
 * grace period.
 */
static int rcu_preempt_offline_tasks(struct rcu_state *rsp,
                                     struct rcu_node *rnp,
                                     struct rcu_data *rdp)
{
        return 0;
}

/*
 * Because preemptable RCU does not exist, it never needs CPU-offline
 * processing.
 */
static void rcu_preempt_offline_cpu(int cpu)
{
}

#endif /* #ifdef CONFIG_HOTPLUG_CPU */

/*
 * Because preemptable RCU does not exist, it never has any callbacks
 * to check.
 */
static void rcu_preempt_check_callbacks(int cpu)
{
}

/*
 * Because preemptable RCU does not exist, it never has any callbacks
 * to process.
 */
static void rcu_preempt_process_callbacks(void)
{
}

/*
 * Wait for an rcu-preempt grace period, but make it happen quickly.
 * But because preemptable RCU does not exist, map to rcu-sched.
 */
void synchronize_rcu_expedited(void)
{
        synchronize_sched_expedited();
}
EXPORT_SYMBOL_GPL(synchronize_rcu_expedited);

#ifdef CONFIG_HOTPLUG_CPU

/*
 * Because preemptable RCU does not exist, there is never any need to
 * report on tasks preempted in RCU read-side critical sections during
 * expedited RCU grace periods.
 */
static void rcu_report_exp_rnp(struct rcu_state *rsp, struct rcu_node *rnp)
{
        return;
}

#endif /* #ifdef CONFIG_HOTPLUG_CPU */

/*
 * Because preemptable RCU does not exist, it never has any work to do.
 */
static int rcu_preempt_pending(int cpu)
{
        return 0;
}

/*
 * Because preemptable RCU does not exist, it never needs any CPU.
 */
static int rcu_preempt_needs_cpu(int cpu)
{
        return 0;
}

/*
 * Because preemptable RCU does not exist, rcu_barrier() is just
 * another name for rcu_barrier_sched().
 */
void rcu_barrier(void)
{
        rcu_barrier_sched();
}
EXPORT_SYMBOL_GPL(rcu_barrier);

/*
 * Because preemptable RCU does not exist, there is no per-CPU
 * data to initialize.
 */
static void __cpuinit rcu_preempt_init_percpu_data(int cpu)
{
}

/*
 * Because there is no preemptable RCU, there are no callbacks to move.
 */
static void rcu_preempt_send_cbs_to_online(void)
{
}

/*
 * Because preemptable RCU does not exist, it need not be initialized.
 */
static void __init __rcu_init_preempt(void)
{
}

#endif /* #else #ifdef CONFIG_TREE_PREEMPT_RCU */

#ifndef CONFIG_SMP

void synchronize_sched_expedited(void)
{
        cond_resched();
}
EXPORT_SYMBOL_GPL(synchronize_sched_expedited);

#else /* #ifndef CONFIG_SMP */

static atomic_t sync_sched_expedited_started = ATOMIC_INIT(0);
static atomic_t sync_sched_expedited_done = ATOMIC_INIT(0);

static int synchronize_sched_expedited_cpu_stop(void *data)
{
        /*
         * There must be a full memory barrier on each affected CPU
         * between the time that try_stop_cpus() is called and the
         * time that it returns.
         *
         * In the current initial implementation of cpu_stop, the
         * above condition is already met when the control reaches
         * this point and the following smp_mb() is not strictly
         * necessary.  Do smp_mb() anyway for documentation and
         * robustness against future implementation changes.
         */
        smp_mb(); /* See above comment block. */
        return 0;
}

/*
 * Wait for an rcu-sched grace period to elapse, but use "big hammer"
 * approach to force grace period to end quickly.  This consumes
 * significant time on all CPUs, and is thus not recommended for
 * any sort of common-case code.
 *
 * Note that it is illegal to call this function while holding any
 * lock that is acquired by a CPU-hotplug notifier.  Failing to
 * observe this restriction will result in deadlock.
 *
 * This implementation can be thought of as an application of ticket
 * locking to RCU, with sync_sched_expedited_started and
 * sync_sched_expedited_done taking on the roles of the halves
 * of the ticket-lock word.  Each task atomically increments
 * sync_sched_expedited_started upon entry, snapshotting the old value,
 * then attempts to stop all the CPUs.  If this succeeds, then each
 * CPU will have executed a context switch, resulting in an RCU-sched
 * grace period.  We are then done, so we use atomic_cmpxchg() to
 * update sync_sched_expedited_done to match our snapshot -- but
 * only if someone else has not already advanced past our snapshot.
 *
 * On the other hand, if try_stop_cpus() fails, we check the value
 * of sync_sched_expedited_done.  If it has advanced past our
 * initial snapshot, then someone else must have forced a grace period
 * some time after we took our snapshot.  In this case, our work is
 * done for us, and we can simply return.  Otherwise, we try again,
 * but keep our initial snapshot for purposes of checking for someone
 * doing our work for us.
 *
 * If we fail too many times in a row, we fall back to synchronize_sched().
 */
void synchronize_sched_expedited(void)
{
        int firstsnap, s, snap, trycount = 0;

        /* Note that atomic_inc_return() implies full memory barrier. */
        firstsnap = snap = atomic_inc_return(&sync_sched_expedited_started);
        get_online_cpus();

        /*
         * Each pass through the following loop attempts to force a
         * context switch on each CPU.
         */
        while (try_stop_cpus(cpu_online_mask,
                             synchronize_sched_expedited_cpu_stop,
                             NULL) == -EAGAIN) {
                put_online_cpus();

                /* No joy, try again later.  Or just synchronize_sched(). */
                if (trycount++ < 10)
                        udelay(trycount * num_online_cpus());
                else {
                        synchronize_sched();
                        return;
                }

                /* Check to see if someone else did our work for us. */
                s = atomic_read(&sync_sched_expedited_done);
                if (UINT_CMP_GE((unsigned)s, (unsigned)firstsnap)) {
                        smp_mb(); /* ensure test happens before caller kfree */
                        return;
                }

                /*
                 * Refetching sync_sched_expedited_started allows later
                 * callers to piggyback on our grace period.  We subtract
                 * 1 to get the same token that the last incrementer got.
                 * We retry after they started, so our grace period works
                 * for them, and they started after our first try, so their
                 * grace period works for us.
                 */
                get_online_cpus();
                snap = atomic_read(&sync_sched_expedited_started) - 1;
                smp_mb(); /* ensure read is before try_stop_cpus(). */
        }

        /*
         * Everyone up to our most recent fetch is covered by our grace
         * period.  Update the counter, but only if our work is still
         * relevant -- which it won't be if someone who started later
         * than we did beat us to the punch.
         */
        do {
                s = atomic_read(&sync_sched_expedited_done);
                if (UINT_CMP_GE((unsigned)s, (unsigned)snap)) {
                        smp_mb(); /* ensure test happens before caller kfree */
                        break;
                }
        } while (atomic_cmpxchg(&sync_sched_expedited_done, s, snap) != s);

        put_online_cpus();
}
EXPORT_SYMBOL_GPL(synchronize_sched_expedited);

#endif /* #else #ifndef CONFIG_SMP */

#if !defined(CONFIG_RCU_FAST_NO_HZ)

/*
 * Check to see if any future RCU-related work will need to be done
 * by the current CPU, even if none need be done immediately, returning
 * 1 if so.  This function is part of the RCU implementation; it is -not-
 * an exported member of the RCU API.
 *
 * Because we have preemptible RCU, just check whether this CPU needs
 * any flavor of RCU.  Do not chew up lots of CPU cycles with preemption
 * disabled in a most-likely vain attempt to cause RCU not to need this CPU.
 */
int rcu_needs_cpu(int cpu)
{
        return rcu_needs_cpu_quick_check(cpu);
}

/*
 * Check to see if we need to continue a callback-flush operations to
 * allow the last CPU to enter dyntick-idle mode.  But fast dyntick-idle
 * entry is not configured, so we never do need to.
 */
static void rcu_needs_cpu_flush(void)
{
}

#else /* #if !defined(CONFIG_RCU_FAST_NO_HZ) */

#define RCU_NEEDS_CPU_FLUSHES 5
static DEFINE_PER_CPU(int, rcu_dyntick_drain);
static DEFINE_PER_CPU(unsigned long, rcu_dyntick_holdoff);

/*
 * Check to see if any future RCU-related work will need to be done
 * by the current CPU, even if none need be done immediately, returning
 * 1 if so.  This function is part of the RCU implementation; it is -not-
 * an exported member of the RCU API.
 *
 * Because we are not supporting preemptible RCU, attempt to accelerate
 * any current grace periods so that RCU no longer needs this CPU, but
 * only if all other CPUs are already in dynticks-idle mode.  This will
 * allow the CPU cores to be powered down immediately, as opposed to after
 * waiting many milliseconds for grace periods to elapse.
 *
 * Because it is not legal to invoke rcu_process_callbacks() with irqs
 * disabled, we do one pass of force_quiescent_state(), then do a
 * raise_softirq() to cause rcu_process_callbacks() to be invoked later.
 * The per-cpu rcu_dyntick_drain variable controls the sequencing.
 */
int rcu_needs_cpu(int cpu)
{
        int c = 0;
        int snap;
        int snap_nmi;
        int thatcpu;

        /* Check for being in the holdoff period. */
        if (per_cpu(rcu_dyntick_holdoff, cpu) == jiffies)
                return rcu_needs_cpu_quick_check(cpu);

        /* Don't bother unless we are the last non-dyntick-idle CPU. */
        for_each_online_cpu(thatcpu) {
                if (thatcpu == cpu)
                        continue;
                snap = per_cpu(rcu_dynticks, thatcpu).dynticks;
                snap_nmi = per_cpu(rcu_dynticks, thatcpu).dynticks_nmi;
                smp_mb(); /* Order sampling of snap with end of grace period. */
                if (((snap & 0x1) != 0) || ((snap_nmi & 0x1) != 0)) {
                        per_cpu(rcu_dyntick_drain, cpu) = 0;
                        per_cpu(rcu_dyntick_holdoff, cpu) = jiffies - 1;
                        return rcu_needs_cpu_quick_check(cpu);
                }
        }

        /* Check and update the rcu_dyntick_drain sequencing. */
        if (per_cpu(rcu_dyntick_drain, cpu) <= 0) {
                /* First time through, initialize the counter. */
                per_cpu(rcu_dyntick_drain, cpu) = RCU_NEEDS_CPU_FLUSHES;
        } else if (--per_cpu(rcu_dyntick_drain, cpu) <= 0) {
                /* We have hit the limit, so time to give up. */
                per_cpu(rcu_dyntick_holdoff, cpu) = jiffies;
                return rcu_needs_cpu_quick_check(cpu);
        }

        /* Do one step pushing remaining RCU callbacks through. */
        if (per_cpu(rcu_sched_data, cpu).nxtlist) {
                rcu_sched_qs(cpu);
                force_quiescent_state(&rcu_sched_state, 0);
                c = c || per_cpu(rcu_sched_data, cpu).nxtlist;
        }
        if (per_cpu(rcu_bh_data, cpu).nxtlist) {
                rcu_bh_qs(cpu);
                force_quiescent_state(&rcu_bh_state, 0);
                c = c || per_cpu(rcu_bh_data, cpu).nxtlist;
        }

        /* If RCU callbacks are still pending, RCU still needs this CPU. */
        if (c)
                raise_softirq(RCU_SOFTIRQ);
        return c;
}

/*
 * Check to see if we need to continue a callback-flush operations to
 * allow the last CPU to enter dyntick-idle mode.
 */
static void rcu_needs_cpu_flush(void)
{
        int cpu = smp_processor_id();
        unsigned long flags;

        if (per_cpu(rcu_dyntick_drain, cpu) <= 0)
                return;
        local_irq_save(flags);
        (void)rcu_needs_cpu(cpu);
        local_irq_restore(flags);
}

#endif /* #else #if !defined(CONFIG_RCU_FAST_NO_HZ) */