1 2002-03-16 Eli Zaretskii <eliz@is.elta.co.il>
3 * Version 21.2 released.
5 2002-03-15 Eli Zaretskii <eliz@is.elta.co.il>
7 * configure.in: Support AIX 5.1.
9 2002-02-22 Eli Zaretskii <eliz@is.elta.co.il>
11 * make-dist: Fix the change from 2002-02-02.
13 2002-02-18 Paul Eggert <eggert@twinsun.com>
15 * make-dist: Port to POSIX 1003.1-2001, which doesn't allow "head -1".
16 "sed q" is a portable equivalent to plain "head -1".
18 2002-02-02 Eli Zaretskii <eliz@is.elta.co.il>
20 * make-dist: Remove the (empty) lisp/calc subdirectory after
23 2002-01-28 Eli Zaretskii <eliz@is.elta.co.il>
25 * configure.in: Recognize BSD/OS 5.0.
27 2002-01-11 Eli Zaretskii <eliz@is.elta.co.il>
29 * make-dist: Make version checking in emacs.texi consistent with
32 2001-11-07 Eli Zaretskii <eliz@is.elta.co.il>
34 * AUTHORS: Regenerate.
36 * make-dist (tempdir): Copy AUTHORS as well.
38 2001-11-01 Gerd Moellmann <gerd@gnu.org>
40 * configure.in: Remove doubled `;;'.
42 2001-11-01 Pavel Jan
\e,Bm
\e(Bk <Pavel@Janik.cz>
44 * configure.in: Reindent --help output.
45 From Per Starback (starback@ling.uu.se).
47 2001-10-31 Eli Zaretskii <eliz@is.elta.co.il>
49 * configure.in: New entry for HP/UX-11.
51 * Makefile.in (SOURCES): Replace GETTING.GNU.SOFTWARE with FTP.
52 From Eric S. Raymond <esr@golux.thyrsus.com>.
54 2001-10-25 Gerd Moellmann <gerd@gnu.org>
56 * Makefile.in (maybe_bootstrap): New target.
57 (all): Add to prerequisites to bootstrap if abbrev.elc doesn't
60 2001-10-24 Gerd Moellmann <gerd@gnu.org>
62 * configure.in: Use $MAKE for `make' if set.
64 2001-10-22 Gerd Moellmann <gerd@gnu.org>
66 * Makefile.in (install-arch-indep): Add -h (follow symlinks)
69 2001-10-20 Gerd Moellmann <gerd@gnu.org>
71 * Version 21.1 released.
73 2001-10-19 Eli Zaretskii <eliz@is.elta.co.il>
75 * aclocal.m4: Remove the commented-out AC_PREREQ (it caused
76 trouble on Debian woody with both Autoconf 2.13 and 2.52
77 installed: the wrong version would be selected by Debian).
79 2001-10-19 Gerd Moellmann <gerd@gnu.org>
81 * configure.in: Use `=' instead of `=='. From Kenichi Handa
84 2001-10-18 Ken Raeburn <raeburn@mit.edu>
86 * configure.in: If --with-hesiod is given, look for
87 hes_getmailhost and res_send or __res_send; check hesiod and
88 resolv libraries respectively if system libraries don't supply
91 2001-09-05 Gerd Moellmann <gerd@gnu.org>
93 * configure.in: Avoid `$@' which is handled specially in
94 Autoconf 2.52. From "Adam J. Richter" <adam@yggdrasil.com>.
96 2001-09-01 Eli Zaretskii <eliz@is.elta.co.il>
98 * make-dist (nt): Add subdirs.el to the list of distributed files.
100 2001-08-14 Eli Zaretskii <eliz@is.elta.co.il>
102 * configure.in (machine): Add an entry for
103 hppa1.1-hitachi-hiuxwe2*.
105 2001-05-28 Gerd Moellmann <gerd@gnu.org>
107 * make-dist (LANG): Set LC_ALL and LANGUAGE to C, unset
108 LC_MESSAGES and LANG. From Karl Eichwalder <keichwa@gmx.net>.
110 2001-05-14 Gerd Moellmann <gerd@gnu.org>
112 * make-dist: Copy texinfo.tex unconditionally.
114 2001-04-25 Eli Zaretskii <eliz@is.elta.co.il>
116 * Makefile.in (install-arch-indep): Add gfdl.1 to the man pages
119 2001-04-06 Gerd Moellmann <gerd@gnu.org>
121 * make-dist: Copy only `[a-z]*.{el,elc}' from leim/quail.
122 Don't copy quick-b5, quick-cns, tsang-b5, and tsang-cns files.
124 * make-dist: Handle leim/MISC-DIC. Only include
125 `[a-zA-Z]*.{el,elc}' from leim/quail.
127 2001-04-05 Gerd Moellmann <gerd@gnu.org>
129 * Makefile.in (install-arch-indep): Remove .cvsignore files.
131 2001-03-30 Gerd Moellmann <gerd@gnu.org>
133 * Makefile.in (.PHONY): Add for bootstrap targets.
134 (bootstrap-clean): New target.
135 (bootstrap): Use it instead of `clean'.
137 2001-03-29 Eli Zaretskii <a34785@is.elta.co.il>
139 * Makefile.in (SUBDIR): Remove leim.
140 (all, .RECURSIVE, extraclean): Add leim explicitly.
141 (leim): Provide separate rule which exports PARALLEL=0 into the
144 2001-03-20 Gerd Moellmann <gerd@gnu.org>
146 * configure.in (HAVE_XPM): Don't print the result of the check for
147 XpmReturnAllocPixels if we don't have an xpm.h.
149 2001-03-05 Gerd Moellmann <gerd@gnu.org>
153 2001-03-04 Eli Zaretskii <eliz@is.elta.co.il>
155 * config.bat: Update the copyright.
157 2001-02-23 Kenichi Handa <handa@etl.go.jp>
159 * configure.in: Use AC_EGREP_CPP to check if the C preprocessor
160 converts `..' to `. .'. If it converts, set CPP_NEED_TRADITIONAL
161 to `yes'. Later in AC_OUTPUT, check this variable.
163 2001-02-09 Dave Love <fx@gnu.org>
167 2001-02-06 Eli Zaretskii <eliz@is.elta.co.il>
169 * info/dir (Ebrowse): Fix the entry (was missing a dot).
171 2001-02-02 Gerd Moellmann <gerd@gnu.org>
173 * mkinstalldirs (errstatus): Chmod a+rx directories we create.
175 * Makefile.in (uninstall): Ignore exit code of `rm'.
177 * Makefile.in (uninstall): Remove more info files. Remove
178 ${libexecdir}/emacs/${version}. Remove ${archlibdir}/fns-*.
180 2001-01-31 Gerd Moellmann <gerd@gnu.org>
182 * noleim-Makefile.in (extraclean): Add.
184 2001-01-28 Gerd Moellmann <gerd@gnu.org>
186 * Makefile.in (extraclean): Added -f to -rm config-tmp-* to keep
189 2001-01-24 Colin Walters <walters@cis.ohio-state.edu>
191 * Makefile.in (tags): Fix typo.
193 2001-01-13 Kenichi Handa <handa@etl.go.jp>
195 * configure.in: Fix typo in the code setting x_search_path.
197 2001-01-10 Dave Love <fx@gnu.org>
199 * configure.in: Don't reset LIBS at end of -lXmu test. Test for
201 (HAVE_XKBGETKEYBOARD): Fix reporting of result.
202 (HAVE_LIBXP): Remove -lXt from AC_CHECK_LIB.
203 (HAVE_XAW3D, HAVE_XPM, HAVE_JPEG, HAVE_PNG, HAVE_TIFF, HAVE_GIF):
204 Don't frob CFLAGS. Remove extra X libs from AC_CHECK_LIB
207 2001-01-08 Eli Zaretskii <eliz@is.elta.co.il>
209 * config.bat: Run the preprocessor with -traditional.
211 2001-01-01 Eli Zaretskii <eliz@is.elta.co.il>
213 * INSTALL: Move copying conditions to end of file.
215 2000-12-27 Eli Zaretskii <eliz@is.elta.co.il>
217 * INSTALL: Add basic installation procedure which assumes
218 `configure' does its job. Elaborate on image support libraries.
219 Add a pointer to Xaw3d library. Add advice about solving
220 configure-time problems by looking in config.log and setting
221 variables in the environment.
223 2000-12-27 Gerd Moellmann <gerd@gnu.org>
225 * Makefile.in (install-arch-indep): If tar fails, exit with
228 2000-12-19 Gerd Moellmann <gerd@gnu.org>
230 * configure.in: Test for XkbGetKeyboard with an AC_TRY_LINK whose
231 source file includes XKBlib.h. On some broken Solaris systems,
232 there is an XKBlib.h, reportedly, but header files included by
233 XKBlib.h are missing.
235 2000-12-14 Gerd Moellmann <gerd@gnu.org>
237 * configure.in: AC_CHECK_FUNC XkbGetKeyboard.
239 2000-12-11 Dave Love <fx@gnu.org>
241 * configure.in <alpha*-dec-osf*>: Use full path for NON_GNU_CPP.
243 2000-12-11 Paul Eggert <eggert@twinsun.com>
245 * aclocal.m4 (AC_SYS_LARGEFILE, AC_SYS_LARGEFILE_MACRO_VALUE):
246 Merge fixes from latest GNU tar version. These macros no longer
247 futz with _XOPEN_SOURCE, as that was not portable in practice.
248 (AC_FUNC_FSEEKO): New macro.
250 * configure.in: Use it instead of invoking AC_CHECK_FUNCS on
253 2000-12-05 Dave Love <fx@gnu.org>
255 * Makefile.in (TAGS, info): Avoid tab-prefixed comments in rules.
257 2000-12-02 Eli Zaretskii <eliz@is.elta.co.il>
259 * info/dir: Change the category to "Emacs".
261 2000-12-01 Gerd Moellmann <gerd@gnu.org>
263 * make-dist (tempdir): Remove epaths.h from the distribution
266 2000-11-23 Eli Zaretskii <eliz@is.elta.co.il>
268 * config.bat: Check for existence of djecho.exe, and print an
269 error message if it is not available.
271 * INSTALL: Describe possible problem with djecho.exe in old
272 versions of DJGPP v2.x.
274 2000-11-23 Gerd Moellmann <gerd@gnu.org>
276 * configure.in: Initialize HAVE_LIBXP to no.
278 2000-11-22 Gerd Moellmann <gerd@gnu.org>
280 * configure.in: Use m/macppc.h instead of the non-existent
283 2000-11-21 Gerd Moellmann <gerd@gnu.org>
285 * Makefile.in (install-arch-indep): Also install info/eshell*
288 * configure.in (HAVE_PNG): Check for the presence of
289 png_get_channels to rule out older PNG libs.
291 * configure.in (AC_OUTPUT): Arrange to emit definitions of
292 GCC and NON_GNU_CPP into config.status.
294 2000-11-20 Dave Love <fx@gnu.org>
296 * configure.in: Fix last change.
298 * GETTING.GNU.SOFTWARE: Deleted.
299 * FTP: New file to replace it.
300 * make-dist: Add FTP, remove GETTING.GNU.SOFTWARE.
302 2000-11-20 Gerd Moellmann <gerd@gnu.org>
304 * configure.in: Use -traditional with GNU cpp.
306 2000-11-17 Gerd Moellmann <gerd@gnu.org>
308 * make-dist: Handle the Mac port. Distribute all makefile.w32-in.
309 Distribute more files from the nt/ subdir. Distribute PBM
310 image files from subdirs of lisp/. Distribute old change logs
311 from subdirs of lisp/. Distribute play/5x5.el.
313 2000-11-11 Dave Love <fx@gnu.org>
315 * config.sub, config.guess: Updated from master source.
317 2000-11-07 Dave Love <fx@gnu.org>
319 * configure.in: Test for mkstemp.
321 2000-11-01 Eli Zaretskii <eliz@is.elta.co.il>
323 * info/dir (Top): Rearrange menu items more logically, and put
324 them into a single category. Add menu items for RefTeX and
327 2000-10-29 Kai Gro
\e,A_
\e(Bjohann <Kai.Grossjohann@CS.Uni-Dortmund.DE>
329 * Makefile.in (install-arch-indep): Use --info-dir instead of
330 --dir-file, and a simple argument instead of --info-file, so that
331 the Debian version of install-info also works.
333 2000-10-19 Eric M. Ludlam <zappo@ultranet.com>
335 * info/dir (Speedbar): Add entry.
337 2000-10-16 Eli Zaretskii <eliz@is.elta.co.il>
339 * INSTALL: Describe the new image-support options to the configure
340 script. List URLs where image support libraries can be found.
342 2000-10-14 Eli Zaretskii <eliz@is.elta.co.il>
344 * info/dir (Top): Add an entry for Eshell.
346 2000-10-02 Dave Love <fx@gnu.org>
348 * configure.in: Check for gai_strerror.
350 2000-10-01 Andreas Schwab <schwab@suse.de>
352 * Makefile.in (install-arch-indep): Update list of installed info
355 2000-09-30 Gerd Moellmann <gerd@gnu.org>
357 * configure.in: Support `sparc*-*-netbsd*'.
359 2000-09-29 Eli Zaretskii <eliz@is.elta.co.il>
361 * info/dir (MIME): Add entry for emacs-mime.
363 2000-09-29 Dave Love <fx@gnu.org>
365 * configure.in: Fix alpha*-dec-osf4 using the osf5 config.
367 2000-09-26 Gerd Moellmann <gerd@gnu.org>
369 * make-dist: Adapt to the change of leim/Makefile which was
370 necessary to ensure a reasonably working `make dist'.
372 * leim-Makefile.in: Moved to leim/Makefile.in..
374 * noleim-Makefile.in: New file, formerly leim/Makefile.in.
376 2000-09-21 Kenichi Handa <handa@etl.go.jp>
378 * leim-Makefile.in (TIT-GB, TIT-BIG5, NON-TIT-GB, NON-TIT-BIG5)
379 (NON-TIT-CNS, JAPANESE, KOREAN, THAI, VIETNAMESE, LAO, INDIAN)
380 (TIBETAN, LATIN, SLAVIC, GREEK, RUSSIAN, MISC): Rename all .el
382 (${TIT}): Adjusted for the above change.
383 (clean mostlyclean): Likewise.
384 (.el.elc): New target.
386 2000-09-19 Gerd Moellmann <gerd@gnu.org>
388 * make-dist: Include XPM and XBM files in lisp/ and subdirs
391 2000-09-18 Gerd Moellmann <gerd@gnu.org>
393 * make-dist (skk): Rename to `ja-dic' because the leim directory
396 2000-09-14 Dave Love <fx@gnu.org>
398 * configure.in: Fix spurion in last change.
400 2000-09-14 Gerd Moellmann <gerd@gnu.org>
402 * configure.in (USE_MMAP_FOR_BUFFERS): Recognize in system
403 configuration files instead of REL_ALLOC_MMAP. Set REL_ALLOC
404 to `no' if defined. Change result report.
406 2000-09-08 Dave Love <fx@gnu.org>
408 * configure.in: Remove spurious `@'s.
410 * aclocal.m4 (AC_FUNC_MMAP): Use fixed version from development
413 2000-09-06 Gerd Moellmann <gerd@gnu.org>
415 * configure.in (REL_ALLOC_MMAP): Recognize in system configuration
416 file and print informational message.
418 * configure.in (AC_FUNC_MMAP): Add.
420 2000-09-01 Gerd Moellmann <gerd@gnu.org>
422 * configure.in: Add ``checking'' messages for
423 XpmReturnAllocPixels.
425 2000-08-28 Gerd Moellmann <gerd@gnu.org>
427 * configure.in: Check <strings.h>; check `index' and `rindex'
430 2000-08-26 Kenichi Handa <handa@etl.go.jp>
432 * configure.in <alpha*-dec-osf*>: Move "NON_GNU_CPP='cpp'" before
433 "case "${canonical}" in".
435 2000-08-25 Dave Love <fx@gnu.org>
437 * configure.in <osf>: Use NON_GNU_CPP='cpp' always.
439 2000-08-25 Kenichi Handa <handa@etl.go.jp>
441 * leim-Makefile.in: Rename skk to ja-dic throughout the file.
443 2000-08-24 Gerd Moellmann <gerd@gnu.org>
445 * configure.in <making srcdir absolute>: Unset CDPATH in case $PWD
446 contains a relative path. Protect against unusable values of
449 2000-08-08 Eli Zaretskii <eliz@is.elta.co.il>
451 * info/dir (WoMan): Add entry.
453 * config.bat (maindir): Update src/_gdbinit even if it does
456 2000-08-07 Gerd Moellmann <gerd@gnu.org>
458 * Makefile.in (config.status): Prepend `$(srcdir)/' to
461 2000-08-03 Gerd Moellmann <gerd@gnu.org>
463 * configure.in: Add support for ia64*-*-linux*.
465 2000-07-27 Gerd Moellmann <gerd@gnu.org>
467 * make-dist (aclocal.m4): Include in distribution.
469 2000-07-26 Dave Love <fx@gnu.org>
471 * configure.in (AC_SYS_LARGEFILE): Moved earlier.
473 2000-07-24 Dave Love <fx@gnu.org>
475 * configure.in: Add AC_SIZE_T.
477 2000-07-18 Dave Love <fx@gnu.org>
479 * configure.in: Reorder so that most tests are done after CPPFLAGS
480 is set from the C_SWITCH_... definitions.
482 2000-07-10 Gerd Moellmann <gerd@gnu.org>
484 * configure.in (HAVE_XPM): Undo previous change. Check for
485 preprocessor define XpmReturnAllocPixels.
487 2000-07-06 Gerd Moellmann <gerd@gnu.org>
489 * configure.in (HAVE_XPM): Check for XpmReturnAllocPixels
490 instead of XpmReadFileToPixmap.
492 2000-07-05 Ken Raeburn <raeburn@gnu.org>
494 * configure.in: Check for <soundcard.h>. Look for ossaudio
495 library, and set LIBSOUND accordingly.
497 2000-07-05 Dave Love <fx@gnu.org>
499 * configure.in: Use AC_HEADER_SYS_WAIT.
501 2000-07-05 Gerd Moellmann <gerd@gnu.org>
503 * make-dist: Check DONTCOMPILE in lisp/Makefile.in instead of
504 lisp/Makefile. Distribute lisp/Makefile.in instead of
507 2000-06-30 Ken Raeburn <raeburn@gnu.org>
509 * configure.in: Add ${C_SWITCH_X_SITE} temporarily to CPPFLAGS,
510 while searching for image-handling libraries.
512 2000-06-26 Gerd Moellmann <gerd@gnu.org>
514 * configure.in (--with-xim): New option.
516 2000-06-23 Dave Love <fx@gnu.org>
518 * configure.in [HAVE_TIMEVAL]: Move gettimeofday test here, test
519 for struct timezone and test how we can call gettimeofday.
520 Check for OSF 5+. Check for term.h.
522 * aclocal.m4: Define the post-2.13 stuff conditionally on autoconf
525 2000-06-23 Gerd Moellmann <gerd@gnu.org>
527 * configure.in (HAVE_LIBXP): Change test for libXp.
529 2000-06-21 Dave Love <fx@gnu.org>
531 * configure.in: Check for fcntl.h. Use AC_FUNC_GETLOADAVG, not
532 simple test for getloadavg and substitute GETLOADAVG_LIBS.
533 Simplify test for GETTIMEOFDAY_ONE_ARGUMENT.
535 2000-06-19 Dave Love <fx@gnu.org>
537 * configure.in (GETTIMEOFDAY_ONE_ARGUMENT): Fix in case
538 _XOPEN_SOURCE is defined.
540 2000-06-16 Gerd Moellmann <gerd@gnu.org>
542 * Makefile.in (distclean): Also make distclean in lisp/.
544 2000-06-15 Eli Zaretskii <eliz@is.elta.co.il>
546 * config.bat: Generate lisp/Makefile from lisp/Makefile.in.
548 2000-06-15 Gerd Moellmann <gerd@gnu.org>
550 * make-dist: Add --help and --snapshot options.
552 2000-06-14 Gerd Moellmann <gerd@gnu.org>
554 * configure.in: Generate lisp/Makefile.
556 * configure.in: Add support for `*-lynxos*'.
557 Use `cpp' as NON_GNU_CPP for `alpha*-dec-osf[5-9]*', as
558 recommended by <Karen.Dorhamer@compaq.com> to fix problems
561 2000-06-13 Ken Raeburn <raeburn@gnu.org>
563 * Makefile.in (install-arch-indep): Don't use "-unset CDPATH" when
564 it's on a continuation line.
566 2000-06-02 Dave Love <fx@gnu.org>
568 * Makefile.in: (install-arch-indep): Add pcl-cvs to list of info
571 * configure.in: Don't specify -n32 flag for mips-sgi-irix6.5.
572 Check for struct exception. Use AC_SYS_LARGEFILE and move ftello
575 * aclocal.m4 (AC_SYS_LARGEFILE_TEST_INCLUDES)
576 (AC_SYS_LARGEFILE_MACRO_VALUE, AC_SYS_LARGEFILE): New.
578 2000-05-26 Gerd Moellmann <gerd@gnu.org>
580 * configure.in: Add check for speed_t typedef.
582 2000-05-25 Ken Raeburn <raeburn@gnu.org>
584 * Makefile.in (install-arch-dep): Install fns-*.el only if it
585 exists; it won't in the CANNOT_DUMP case.
587 2000-05-25 Gerd Moellmann <gerd@gnu.org>
589 * Makefile.in: Ignore exit status of `unset CDPATH' everywhere.
590 On FreeBSD, the exit status is 1 if CDPATH is not set.
591 (install-arch-indep): Install ebrowse.info.
593 2000-05-20 NIIBE Yutaka <gniibe@mri.co.jp>
595 * configure.in: Check for grandpt and getpt.
597 2000-05-09 Dave Love <fx@gnu.org>
599 * Makefile.in (install-arch-indep): Filter CVS as well as RCS.
601 2000-05-05 Gerd Moellmann <gerd@gnu.org>
603 * make-dist: Make a link for lib-src/grep-changelog. Copy
606 2000-05-01 Eli Zaretskii <eliz@is.elta.co.il>
608 * config.bat: Identify the beginning of the cpp stuff in
609 src/Makefile.in and lib-src/Makefile.in more accurately.
611 2000-04-27 Gerd Moellmann <gerd@gnu.org>
613 * configure.in: Add support for `powerpc*-*-linux-gnu*'.
615 2000-04-19 Gerd Moellmann <gerd@gnu.org>
617 * configure.in: Add support for `powerpc-*-netbsd*'.
619 2000-04-19 Dave Love <fx@gnu.org>
621 * configure.in: Don't use AC_FUNC_GETLOADAVG.
623 * aclocal.m4 (AC_FUNC_MKTIME): Use AC_SUBST.
625 2000-04-16 Dave Love <fx@gnu.org>
627 * Makefile.in (${srcdir}/configure): Depend on aclocal.m4.
629 2000-04-14 Dave Love <fx@gnu.org>
631 * configure.in: Use AC_FUNC_GETLOADAVG, AC_FUNC_MKTIME.
633 * aclocal.m4 (AC_FUNC_MKTIME): New.
635 2000-03-28 Ken Raeburn <raeburn@gnu.org>
637 * configure.in: Line up "--help" output a little better.
639 2000-03-26 Gerd Moellmann <gerd@gnu.org>
641 * Makefile.in (bootstrap-lisp-1, bootstrap-lisp, bootstrap-src):
643 (bootstrap): Rewritten in terms of the new targets above. Make
646 2000-03-12 Gerd Moellmann <gerd@gnu.org>
648 * config.guess, config.sub: Use the versions of the files from
651 2000-03-08 Dave Love <fx@gnu.org>
653 * configure.in: Use AC_PROG_RANLIB, AC_C_PROTOTYPES,
654 AC_C_VOLATILE. Define POINTER_TYPE.
656 * aclocal.m4: New file.
658 2000-03-02 Gerd Moellmann <gerd@gnu.org>
660 * configure.in (machine): Add `mipsel-*-netbsd*' and
663 2000-03-01 Gerd Moellmann <gerd@gnu.org>
665 * configure.in (machine): Add support for `*-auspex-sunos*'.
667 2000-02-29 Gerd Moellmann <gerd@gnu.org>
669 * configure.in (C_OPTIMIZE_SWITCH) [__GNUC__]: Use -O2.
671 2000-02-18 Dave Love <fx@gnu.org>
673 * configure.in: Define NON_GNU_CPP on alpha-dec-osf5+.
675 2000-02-18 Andreas Schwab <schwab@suse.de>
677 * Makefile.in (install-arch-indep): Add eudc to list of installed
680 2000-02-17 Ken Raeburn <raeburn@gnu.org>
682 * configure.in: Include -lz and -ljpeg (if it's available) when
683 testing for the tiff library.
685 2000-02-17 Gerd Moellmann <gerd@gnu.org>
687 * configure.in: Remove LISP_FLOAT_TYPE.
689 2000-02-12 Dave Love <fx@gnu.org>
691 * configure.in: Use AC_FUNC_VFORK.
693 2000-02-01 Gerd Moellmann <gerd@gnu.org>
695 * make-dist: Various fixes for new development tree.
697 * leim-Makefile.in: New file.
699 2000-01-31 Gerd Moellmann <gerd@gnu.org>
701 * Makefile.in (dist): Call ./make-dist.
703 2000-01-24 Dave Love <fx@gnu.org>
705 * configure.in: Remove -G0 from Irix NON_GCC_TEST_OPTIONS.
707 2000-01-18 Gerd Moellmann <gerd@gnu.org>
709 * configure.in (HAVE_GIF): Check for DGifOpen instead of
712 2000-01-11 Andreas Schwab <schwab@suse.de>
714 * Makefile.in (install-arch-indep): Update list of info files to
717 2000-01-05 Dave Love <fx@gnu.org>
719 * configure.in: Check for jerror.h as well as libjpeg.
721 2000-01-03 Andreas Schwab <schwab@suse.de>
723 * Makefile.in (install-arch-indep): Install autotype*. Run
724 install-info on autotype and emacs-faq.info.
726 1999-12-04 Dave Love <fx@gnu.org>
728 * Makefile.in: (install-arch-indep): Depend on `info'.
729 (install-strip): Use `install' as sub-make target.
731 1999-11-23 Ken Raeburn <raeburn@gnu.org>
733 * configure.in: Restore Kerberos code deleted on 1999-05-29 that
734 didn't need to be deleted. Check for the k5crypto library as well
735 as the crypto library; MIT Kerberos 1.1 changed the name.
737 1999-11-18 Dave Love <fx@gnu.org>
739 * configure.in: Fix NON_GNU_CPP for Irix 6 to avoid failing tests.
741 1999-11-11 Erik Naggum <erik@naggum.no>
743 * configure.in (bitmapdir): Allow for both "bitmaps" directories.
745 1999-11-08 Dave Love <fx@gnu.org>
747 * configure.in: Fix change for --with-pop default.
749 1999-11-04 Dave Love <fx@gnu.org>
751 * configure.in: Default to --with-pop. Change sense of with-gcc
752 and with-toolkit-scroll-bars messages to reflect the defaults.
754 1999-11-01 Gerd Moellmann <gerd@gnu.org>
756 * INSTALL: Mention the Emacs Lisp Reference.
758 1999-10-27 Noah Friedman <friedman@splode.com>
760 * configure.in: Check for dynamic ptys (/dev/ptmx, /dev/pts/).
762 1999-10-23 Gerd Moellmann <gerd@gnu.org>
764 * Makefile.in (bootstrap): New target.
766 1999-10-19 Paul Eggert <eggert@twinsun.com>
768 Add support for large files. Merge glibc 2.1.2.
770 * configure.in (AC_CHECK_HEADERS): Add stdio_ext.h.
771 (HAVE_TM_GMTOFF): New symbol.
772 (AC_CHECK_FUNCS): Add __fpending, ftello, getloadavg, mblen,
774 (LOCALTIME_CACHE): Don't include stdlib.h, as config.h does this now.
776 1999-10-09 Stefan Monnier <monnier@cs.yale.edu>
778 * make-dist (dontcompile): look for the DONTCOMPILE variable rather
779 than the obsolete dontcompilefiles pseudo-rule in lisp/Makefile.
781 1999-10-09 Richard M. Stallman <rms@gnu.org>
783 * Makefile.in (uninstall, install-arch-indep, install-arch-dep):
784 Unset CDPATH to prevent cd from generating output.
786 1999-10-08 Stefan Monnier <monnier@cs.yale.edu>
788 * update-subdirs: also ignore CVS subdirs.
790 1999-10-07 Gerd Moellmann <gerd@gnu.org>
792 * Makefile.in (install-arch-indep): Add ada-mode.
794 1999-10-06 Dave Love <fx@gnu.org>
796 * Makefile.in: Add rules for config.status, configure.
798 1999-09-07 Gerd Moellmann <gerd@gnu.org>
800 * configure.in (--with-sound): Removed.
802 1999-08-30 Gerd Moellmann <gerd@gnu.org>
804 * configure.in (USE_TOOLKIT_SCROLL_BARS): Move the test down after
806 (HAVE_TIFF): Add -lm to library check.
808 1999-08-28 Richard Stallman <rms@gnu.org>
810 * configure.in (USE_TOOLKIT_SCROLL_BARS): Move tests for
811 -lXaw3d, -lXpm, -ljpeg, -lpng, -ltiff, and -lgif, down
812 after the other X-related libraries.
814 1999-08-21 Dave Love <fx@gnu.org>
816 * configure.in: Don't check for jpeglib.h.
818 1999-08-20 Gerd Moellmann <gerd@gnu.org>
820 * configure.in (HAVE_TIFF): Remove tiff34 prefix from tiffio.h.
821 (HAVE_XAW3D): Don't check for Xaw3d if USE_X_TOOLKIT=none.
823 1999-08-18 Dave Love <fx@gnu.org>
825 * configure.in: : Check for termcap.h.
827 1999-08-15 Gerd Moellmann <gerd@gnu.org>
829 * configure.in: Add --with-toolkit-scroll-bars. If "no",
830 use Emacs' scroll bars, even if configured for Motif or when
833 1999-08-12 Wolfgang Rupprecht <wolfgang@wsrcc.com>
835 * configure.in: Check for getaddrinfo.
837 1999-08-04 Eli Zaretskii <eliz@gnu.org>
839 * config.bat: Make --no-debug work again by removing -gcoff.
841 1999-07-30 Dave Love <fx@gnu.org>
843 * configure.in: Check for stdlib.h.
845 1999-07-19 Dave Love <fx@gnu.org>
847 * configure.in: Grok sparc64-*-linux-gnu*.
849 1999-07-12 Richard Stallman <rms@gnu.org>
851 * Version 20.4 released.
853 1999-06-23 Karl Heuer <kwzh@gnu.org>
855 * make-dist: Unset EMACS_UNIBYTE, so Emacs runs in its default state.
856 Quote $EMACS, in case it's a program with args.
858 1999-05-29 Richard M. Stallman <rms@gnu.org>
860 * configure.in: Delete the Kerberos stuff.
862 1999-05-27 Greg Hudson <ghudson@mit.edu>
864 * configure.in: Prefer kerberos 5 names.
866 1999-04-26 Richard M. Stallman <rms@gnu.org>
868 * configure.in: Check for libXp.
870 1999-04-08 Richard Stallman <rms@gnu.org>
872 * make-dist: Include change logs in subdirs of `lisp'.
874 1999-04-05 Richard Stallman <rms@gnu.org>
876 * Makefile.in (mkdir): If we create ${datadir}, make it world-readable.
877 (install-arch-indep): Make ${datadir}/emacs world-readable.
879 1999-03-30 Eli Zaretskii <eliz@gnu.org>
881 * config.bat: Use epaths.* instead of paths.*.
883 1999-03-07 Eli Zaretskii <eliz@gnu.org>
885 * INSTALL: Add detailed instructions to unpack and install
888 1999-02-26 Richard Stallman <rms@gnu.org>
890 * configure.in: Use epaths.h and epaths-force instead of paths....
892 * Makefile.in (epaths-force): Renamed from paths-force;
893 operate on epaths.in and produce epaths.h.
895 1999-02-24 Richard Stallman <rms@gnu.org>
897 * make-dist: Fix nt/icons directory handling.
899 1999-02-22 Simon Josefsson <jas@pdc.kth.se>
901 * configure.in (f301-fujitsu-uxpv4.1): New target.
903 1999-02-20 Richard Stallman <rms@gnu.org>
905 * make-dist (tempparent): Fix command to update info files.
907 1999-02-09 Richard Stallman <rms@gnu.org>
909 * configure.in (powerpc-apple-netbsd*): New alternative.
911 1999-01-25 Geoff Voelker <voelker@cs.washington.edu>
913 * make-dist: Include the new directory nt/icons in distributions.
915 1999-01-19 Richard Stallman <rms@psilocin.ai.mit.edu>
917 * configure.in: Change message about HAVE_XFREE386.
919 1999-01-07 Eli Zaretskii <eliz@gnu.org>
921 * config.bat: Support configuring with leim.
923 1998-12-16 Petri Kaurinkoski <Petri.Kaurinkoski@hut.fi>
925 * configure.in (mips-sgi-irix6.5): New target.
927 1998-12-16 Jonathan I. Kamens <jik@kamens.brookline.ma.us>
929 * configure.in: Remove GSS-API support, since it has been removed
932 1998-12-04 Markus Rost <rost@delysid.gnu.org>
934 * Makefile.in (install-arch-dep): Copy fns-*.el from lib-src.
936 1998-12-04 Andreas Schwab <schwab@delysid.gnu.org>
938 * Makefile.in: Don't install customize info file. Run
939 install-info on viper info file.
941 1998-11-29 Richard Stallman <rms@psilocin.ai.mit.edu>
943 * Makefile.in (install-arch-dep): Copy fns-*.el from lib-src.
945 1998-11-16 Kenichi Handa <handa@etl.go.jp>
947 * configure.in (*-*-bsdi4*): New target.
949 1998-11-13 Ehud Karni <ehud@unix.simonwiesel.co.il>
951 * configure.in: Fix previous change.
953 1998-11-11 Richard Stallman <rms@gnu.org>
955 * configure.in (aviion-intel): New machine.
957 1998-11-04 Kenichi Handa <handa@etl.go.jp>
959 * configure.in (mips-nec-sysv4*): New target.
961 1998-11-03 Andreas Schwab <schwab@delysid.gnu.org>
963 * Makefile.in (install-arch-dep): Fix last change and use fns-*.el
966 1998-10-31 Richard Stallman <rms@psilocin.ai.mit.edu>
968 * make-dist: Don't include fns*.el in dist.
970 1998-10-30 Dave Love <fx@gnu.org>
972 * configure.in: Don't mkdir cpp.
974 1998-10-30 Andreas Schwab <schwab@delysid.gnu.org>
976 * Makefile.in (install-arch-dep): Install src/fns-*.el in
979 1998-08-19 Richard Stallman <rms@psilocin.ai.mit.edu>
981 * Version 20.3 released.
983 1998-07-30 Paul Eggert <eggert@twinsun.com>
985 * Makefile.in (Makefile, src/Makefile, src/config.stamp)
986 (lib-src/Makefile, man/Makefile, oldXMenu/Makefile)
987 (lwlib/Makefile, leim/Makefile):
988 Prepend $(srcdir)/ to rule dependencies outside this dir.
990 1998-06-30 Richard Stallman <rms@psilocin.ai.mit.edu>
992 * configure.in: Use unset CDPATH instead of making it empty.
994 1998-06-20 Karl Heuer <kwzh@gnu.org>
996 * configure.in: Assume unspecified Solaris is 2.5, not 2.4.
998 1998-06-07 Richard Stallman <rms@psilocin.ai.mit.edu>
1000 * make-dist (MANIFEST): Include most subdirs, but exclude subdirs.el
1001 and default.el. Sort the results.
1003 1998-05-31 Karl Heuer <kwzh@gnu.org>
1005 * Makefile.in (install-arch-indep): Don't die if site-lisp/ isn't
1008 1998-05-14 Richard Stallman <rms@psilocin.ai.mit.edu>
1010 * Makefile.in (install-arch-indep):
1011 Don't alter site-lisp/subdirs.el if it exists.
1013 1998-05-12 Richard Stallman <rms@psilocin.ai.mit.edu>
1015 * Makefile.in (install-arch-indep): Put `-' on commands to create
1016 subdirs.el in site-lisp dirs.
1018 1998-05-07 Richard Stallman <rms@psilocin.gnu.org>
1020 * Makefile.in (install-arch-indep): Fix typo in previous change.
1022 1998-05-06 Richard Stallman <rms@psilocin.gnu.org>
1024 * Makefile.in (install-arch-indep): Pass --dir-file to install-info.
1026 1998-04-28 Richard Stallman <rms@psilocin.gnu.org>
1028 * Makefile.in (mkdir): Create the site-lisp dirs.
1029 (install-arch-indep): Make site-lisp/subdirs files world-readable.
1031 1998-04-26 Richard Stallman <rms@psilocin.gnu.org>
1033 * Makefile.in (INSTALL_INFO): New variable.
1034 (install-arch-indep): Don't replace the dir file if it already exists.
1035 Use the install-info program, via INSTALL_INFO, to add entries.
1036 Make the `info' subdir and the Info files world-readable.
1038 1998-04-16 Eli Zaretskii <eliz@delysid.gnu.org>
1040 * config.bat: Make sure the environment is large enough to support
1041 all the "set foo=bar" commands. Update pointers to DJGPP FTP
1044 1998-04-10 Karl Heuer <kwzh@gnu.org>
1046 * make-dist: Don't accept EMACS=t when testing for $EMACS set.
1048 1998-04-06 Jonathan I. Kamens <jik@kamens.brookline.ma.us>
1050 * configure.in: Add --with-gssapi to specify GSS-API
1051 authentication support for movemail.
1053 1998-04-02 Richard Stallman <rms@psilocin.ai.mit.edu>
1055 * Makefile.in (install-arch-indep): Fix previous change.
1057 1998-03-30 Richard Stallman <rms@psilocin.ai.mit.edu>
1059 * Makefile.in (info): Run man in build dir, not srcdir.
1061 1998-03-28 Richard Stallman <rms@psilocin.ai.mit.edu>
1063 * Makefile.in (install-arch-indep): Fix previous change.
1065 1998-03-23 Kenichi Handa <handa@etl.go.jp>
1067 * Makefile.in (top_distclean): Check the existence of `lock'
1070 1998-03-22 Richard Stallman <rms@gnu.org>
1072 * Makefile.in (install-arch-indep): Put special subdirs.el files
1073 in site-lisp dirs. Use normal-top-level-add-subdirs-to-load-path.
1075 1998-03-21 Richard Stallman <rms@psilocin.gnu.org>
1077 * make-dist: Fix shell syntax in check for missing .el or .elc files.
1079 1998-03-09 Richard Stallman <rms@psilocin.gnu.org>
1081 * configure.in (hppa-hp-hpux1[0-9]*): Handle versions 1X like 10.
1082 (m68*-hp-hpux*): Handle versions 1X like 10.
1084 1998-03-07 Richard Stallman <rms@psilocin.gnu.org>
1086 * make-dist: PROBLEMS is now in etc, not top level dir.
1088 * Makefile.in (SOURCES): Delete PROBLEMS.
1090 1998-02-25 Richard Stallman <rms@gnu.org>
1092 * configure.in (hppa*-hp-hpux*): Use hpux10 by default.
1094 * Makefile.in (install-arch-indep): Do chmod a+x on subdirs.
1096 1998-01-17 Richard Stallman <rms@gnu.org>
1098 * Makefile.in (install-arch-indep): Add semicolon before `else'.
1100 1998-01-02 Richard Stallman <rms@psilocin.gnu.org>
1102 * make-dist (tempparent): New option --no-check.
1104 * make-dist: Don't do anything with cpp directory.
1106 1997-12-20 Richard Stallman <rms@psilocin.gnu.org>
1108 * configure.in (sparc-fujitsu-sysv4*): New target.
1110 1997-12-17 Andreas Schwab <schwab@gnu.org>
1112 * configure.in: Cache more tests. Add missing quotes around
1113 message with embedded comma.
1115 1997-12-04 Karl Heuer <kwzh@gnu.org>
1117 * Makefile.in (unlock, relock): Don't reference cpp/ directory.
1119 1997-11-26 Joel N. Weber II <devnull@gnu.org>
1121 * make-dist: Changed the comment about `umask 0' to say `Don't
1122 restrict access to any files.'; previously it said `Don't protect
1123 any files', which may have implied that we think fascism is good.
1125 1997-11-24 Paul Eggert <eggert@twinsun.com>
1127 * configure.in (AC_CHECK_FUNCS): Add strftime. The new GNU C library
1128 strftime needs the underlying host's strftime for locale dependent
1131 1997-11-20 Abraham Nahum <miko@uxsrvc.tti.co.il>
1133 * configure.in (i586-dg-dguxR4.*): New name in case branch.
1135 1997-11-20 Eli Zaretskii <eliz@is.elta.co.il>
1137 * config.bat: Configure the man subdirectory.
1139 1997-11-07 Paul Eggert <eggert@twinsun.com>
1141 * configure.in (AC_CHECK_LIB): Add -lintl.
1143 1997-11-07 Karl Heuer <kwzh@gnu.org>
1145 * make-dist (check for .elc files): Avoid bash-specific syntax.
1146 (check for overflow 14-char limit): Simplify.
1148 1997-11-07 Richard Stallman <rms@gnu.org>
1150 * Makefile.in (install): Move blessmail last.
1152 1997-10-02 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1154 * configure.in (gettimeofday, one arg or two):
1155 Clarify messages by avoiding double negative.
1157 1997-09-30 Karl Eichwalder <ke@suse.de>
1159 * Makefile.in (install-arch-indep): install the widget info file.
1161 1997-09-24 Jonathan I. Kamens <jik@kamens.brookline.ma.us>
1163 * configure.in (with-pop, with-kerberos): Need to check Kerberos
1164 libraries in reverse order, so that libraries will appear in the
1165 correct dependency order on the link line (and so that the
1166 configure checks themselves will work properly when early
1167 libraries depend on later ones).
1169 1997-09-21 Erik Naggum <erik@naggum.no>
1171 * make-dist (making links to `src'): Keep timestamp on copied
1174 * make-delta: New script to produce delta distributions.
1176 1997-09-19 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1178 * Version 20.2 released.
1180 1997-09-15 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1182 * Version 20.1 released.
1184 * Makefile.in (install-leim): Depend on mkdir.
1185 (leim): Depend on src.
1187 1997-09-13 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1189 * configure.in: Recognize alpha* instead of just alpha.
1191 1997-09-12 Paul Eggert <eggert@twinsun.com>
1193 * leim-Makefile.in (mostlyclean, maintainer-clean): New targets.
1195 1997-09-12 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1197 * update-subdirs: Use rm -f.
1199 1997-09-08 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1201 * update-subdirs: Delete subdirs.el if this dir has no subdirs.
1202 Ignore subdirs named Old.
1204 1997-08-04 Kenneth Stailey <kstailey@elbereth.disclosure.com>
1206 * configure.in: Add OpenBSD clause to set $machine.
1208 1997-09-04 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1210 * make-dist: Recompile everything after updating various Lisp files.
1211 Recompile in leim as well as lisp.
1212 Check in leim as well as lisp for mismatched files and too-long names.
1214 1997-09-03 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1216 * Makefile.in (TAGS tags): Simply refer this to the src subdir.
1218 1997-08-30 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1220 * Makefile.in (install-arch-indep): Verify ./lisp has simple.el in it
1221 before trying to copy anything from it.
1223 1997-08-27 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1225 * Makefile.in (man/Makefile): New target.
1226 (tags): Define env var EMACS and run Makefile from build dir.
1228 1997-08-27 Eli Zaretskii <eliz@psilocin.gnu.ai.mit.edu>
1230 * config.bat: If src/_gdbinit doesn't exist, try using
1231 src/.gdbinit to create it (for building on Windows 95).
1233 1997-08-25 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1235 * Makefile.in (install-arch-indep):
1236 Discard extra data in tar | tar pipes.
1238 1997-08-24 NIIBE Yutaka <gniibe@mri.co.jp>
1240 * configure.in (x_default_search_path): Corrected
1241 '${x_library}' to '${x_library}/X11'.
1243 1997-08-22 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1245 * configure.in (HAVE_MOTIF_2_1): Test for Motif 2.1,
1247 1997-08-22 Jonathan I. Kamens <jik@kamens.brookline.ma.us>
1249 * configure.in: Support auto-configuration of both Kerberos V4 and
1250 Kerberos V5 for movemail, including detection of V4 and V5 header
1251 files and libraries.
1253 1997-08-16 NIIBE Yutaka <gniibe@etl.go.jp>
1255 * configure.in: Compute x_default_search_path
1256 and substitute into makefiles.
1258 * Makefile.in (paths-force): Store PATH_X_DEFAULTS in paths.h.
1260 1997-08-08 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1262 * Makefile.in (install-arch-indep): Run list-load-path-shadows.
1264 1997-08-07 Erik Naggum <erik@naggum.no>
1266 * configure.in: Remove lockdir, it is no longer needed.
1267 * Makefile.in (mkdir): Don't create lockdir.
1268 (lockdir): Variable deleted.
1269 (paths-force): Don't operate on PATH_LOCK.
1271 1997-08-06 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1273 * leim-Makefile.in (clean, distclean): New targets.
1275 * make-dist: Include leim/ChangeLog in leim distribution.
1277 1997-08-01 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1279 * configure.in (i*86-*-sysv4.2uw*): Set NON_GNU_CPP.
1281 1997-07-30 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1283 * Makefile.in (CPPFLAGS): Get this from configure, like CFLAGS.
1285 1997-07-27 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1287 * Makefile.in (LDFLAGS): Get this from configure, like CFLAGS.
1289 1997-07-25 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1291 * make-dist: Update leim/leim-list.el.
1292 Pass along value of $EMACS when updating lisp dir.
1294 1997-07-25 Marcus G. Daniels <marcus@cathcart.sysc.pdx.edu>
1296 * configure.in (doug_lea_malloc): Make __after_morecore_hook a
1297 prerequisite to the use of Doug Lea's malloc.
1299 1997-07-21 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1301 * Makefile.in (top_distclean): Use -f to delete contents of lock dir.
1303 * make-dist: Use name leim/SKK-DIC, not leim/SKK.
1305 1997-07-16 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1307 * make-dist: Arrange for the leim tar file to unpack in emacs-M.N/leim.
1309 1997-07-11 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1311 * configure.in (mips-sony-newsos6*): File news-risc.h renamed
1314 1997-07-10 Eli Zaretskii <eliz@is.elta.co.il>
1316 * config.bat: Use `sed' instead of `cp', which might not be
1319 1997-07-09 Kenichi Handa <handa@etl.go.jp>
1321 * Makefile.in (mostlyclean): Add cleaning leim directory.
1322 (clean, distclean, maintainer-clean): Likewise.
1324 1997-07-09 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1326 * make-dist (bogosities): Check subdirs of `lisp' also.
1328 1997-07-08 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1330 * make-dist (etc): Really avoid symlinks now.
1331 (lisp): Don't delete from subdirs the things we never copy.
1333 1997-07-07 Ken'ichi Handa <handa@psilocin.gnu.ai.mit.edu>
1335 * Makefile.in (install-arch-indep): Correct the target name.
1336 The first letter `i' was dropped by the previous change of mine.
1338 1997-07-06 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1340 * configure.in (leim/Makefile): Generate this.
1341 (*-sysv4.2uw*): Recognize new alternative.
1343 * leim-Makefile.in: Renamed from leim-Makefile.
1345 * make-dist: Set up real-leim subdirectory,
1346 with the real contents of leim; then move it to
1347 a separate top-level directory.
1349 * make-dist: Don't mention site-lisp, site-init, site-start
1350 or default, when listing files hat are not compiled and should be.
1352 * configure.in: Create src/config.stamp at the end.
1354 1997-07-04 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1356 * Makefile.in (install-leim): Correct previous change.
1358 1997-07-02 Ken'ichi Handa <handa@psilocin.gnu.ai.mit.edu>
1360 * Makefile.in (install-leim): New target.
1361 (install): Depend on install-leim.
1363 1997-07-01 Ken'ichi Handa <handa@psilocin.gnu.ai.mit.edu>
1365 * Makefile.in (SUBDIR): Add leim.
1366 (SUBDIR_MAKEFILES): Add leim/Makefile.
1367 (leim/Makefile): New target.
1369 1997-07-01 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1371 * leim-Makefile: New file.
1372 * make-dist: Initialize a `leim' subdirectory with that makefile.
1374 1997-06-29 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1376 * configure.in (GNU_MALLOC_reason): Fix message text.
1378 1997-06-27 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1380 * make-dist (lisp): Don't process subdirs that start with =.
1381 (etc): Copy symlinks, as in src.
1383 1997-06-26 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1385 * configure.in (i*86-*-unixware*): New alternative.
1387 1997-06-22 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1389 * Makefile.in (src/config.stamp): Target renamed from src/config.h
1390 and touch it explicitly.
1392 * configure.in (mips-sony-newsos6*): New alternative.
1393 (mips-*-linux-gnu*): New alternative.
1394 (*-*-bsdi*): New alternative.
1395 (i*86-*-bsd386, i*86-*-bsdi...): Delete old alternatives.
1397 1997-06-22 Dave Love <d.love@dl.ac.uk>
1399 * Makefile.in (lib-src): Depend on src/config.h (e.g. for
1401 (src/config.h): New target to re-configure if src/config.in
1404 1997-06-18 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1406 * configure.in (shutdown): Check for `shutdown' function.
1408 1997-06-18 Ken'ichi Handa <handa@psilocin.gnu.ai.mit.edu>
1410 * update-subdirs: Include the directory "language" in subdirs.
1412 1997-06-01 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1414 * configure.in (m88k-dg-dgux4*): New alternative.
1415 (alpha-*-netbsd*): New alternative.
1416 (powerpcle-*-solaris2*): New alternative.
1418 1997-05-20 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1420 * make-dist: Warn about .el files that are not compiled.
1422 1997-05-11 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1424 * Makefile.in (dist): Don't run update-subdirs here,
1425 since make-dist now gets that done.
1427 * make-dist: Use the new `updates' target in lisp/Makefile.
1429 * make-dist: Use new non-file targets in lisp/Makefile.
1431 1997-04-27 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1433 * make-dist: Handle all subdirs of `lisp' uniformly.
1434 Don't handle `term' and `language' specially.
1435 Clear out umask at the beginning.
1437 1997-04-11 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1439 * make-dist: Use Make to update finder-inf.el and autoloads.
1440 Also update cus-load.el.
1442 1997-04-09 Marcus G. Daniels <marcus@cathcart.sysc.pdx.edu>
1444 * configure.in (doug_lea_malloc): First check for SYSTEM_MALLOC,
1445 in case it is desirable to disable the GNU malloc features with
1448 1997-04-08 Marcus G. Daniels <marcus@cathcart.sysc.pdx.edu>
1450 * configure.in (DOUG_LEA_MALLOC):
1451 Define if malloc_{get,set}_state exist.
1453 1997-03-05 Ken'ichi Handa <handa@etl.go.jp>
1455 * make-dist: Make links for files under lisp/language.
1457 1997-02-20 Kenichi Handa <handa@etl.go.jp>
1459 * update-subdirs: Exclude the directory "language" from subdirs.
1461 1997-01-26 Karl Heuer <kwzh@gnu.ai.mit.edu>
1463 * configure.in: Check for rint and cbrt.
1465 1997-01-01 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1467 * make-dist: Use $EMACS to say where to run Emacs.
1468 Add --no-update option.
1470 1996-12-30 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1472 * configure.in (hppa1.1-hitachi-hiuxmpp): New configuration.
1474 1996-12-28 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1476 * make-dist (copying src): Check thoroughly for symlinks
1477 and copy them in all cases. Regularize the linking of *.in
1478 and *.opt and ChangeLog files.
1479 (copying lib-src): Likewise.
1480 Don't rm getdate.c or y.tab.*--they don't exist any more.
1482 1996-12-18 Jonathan I. Kamens <jik@annex-1-slip-jik.cam.ov.com>
1484 * configure.in: Check for libmail, maillock.h and
1485 touchlock (for movemail).
1487 1996-12-15 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1489 * configure.in (limits.h): Check for this file.
1491 1996-12-08 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1493 * configure.in (rs6000-ibm-aix4.2): New alternative.
1494 (rs6000-ibm-aix4.0): New alternative.
1495 (rs6000-ibm-aix4*): Assume aix 4.1 by default.
1497 1996-11-22 Ben Harris <bjh21@cam.ac.uk>
1499 * configure.in: Recognize vax-*-netbsd*.
1501 1996-11-06 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1503 * configure.in (locallisppath): Add leim directory.
1505 1996-10-31 Eli Zaretskii <eliz@is.elta.co.il>
1507 * config.bat: Make sure `mv' supports forward slashes and -f.
1509 1996-10-28 Christian Limpach <chris@nice.ch>
1511 * configure.in (hppa*-next-nextstep*): * added after hppa
1512 to accept hppa1.0 and hppa1.1.
1514 1996-10-05 Marcus G. Daniels <marcus@coulee.tdb.com>
1516 * configure.in: Provide an empty default for LD_SWITCH_X_SITE_AUX.
1517 * configure.in (ld_switch_machine): Fix typo.
1519 1996-09-28 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1521 * configure.in: Fetch LD_SWITCH_SYSTEM and LD_SWITCH_MACHINE
1522 from config.h and use them in $ac_link.
1524 1996-09-28 Erik Naggum <erik@psilocin.gnu.ai.mit.edu>
1526 * configure.in: Create a subdir named `lisp'.
1528 1996-09-24 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1530 * configure.in: Check for getcwd.
1532 1996-09-04 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1534 * configure.in: Check for termios.h. Check for setpgid.
1536 1996-08-31 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1538 * configure.in: Check for setrlimit.
1540 1996-08-31 Paul Eggert <eggert@twinsun.com>
1542 * configure.in: Check for sys/systeminfo.h, getdomainname, sysinfo.
1544 1996-08-28 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1546 * configure.in: Check for utimes.
1548 * configure.in: Check for com_err library, but only
1549 if --with-kerberos was used. Check for krb and des
1550 only if --with-kerberos.
1552 1996-08-26 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1554 * Makefile.in (INSTALL_STRIP): New variable.
1555 (install-strip): Set INSTALL_STRIP, not INSTALL_PROGRAM.
1556 (install-arch-dep): Use INSTALL_STRIP, and pass it to lib-src.
1558 1996-08-25 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1560 * configure.in: Check for krb and des libraries.
1562 1996-08-24 Richard Stallman <rms@ethanol.gnu.ai.mit.edu>
1564 * configure.in (*-sunos4.1.[3-9]*noshare):
1565 Use sunos413, not sunos4-1-3.
1566 (m88k-dg-dgux5.4R3*): Use dgux5-4-3, not dgux5-4r3.
1567 (arm-acorn-riscix1.2*): Use riscix12, not riscix1-2.
1569 1996-08-22 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1571 * Makefile.in (src/paths.h): Target deleted.
1572 (paths-force): Delete all dependencies on this target
1573 but don't delete the target.
1574 (install): Depend on `all'.
1575 (paths-force): Don't print a message.
1577 * configure.in: Generate src/paths.h here.
1579 1996-08-18 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1581 * configure.in (NON_GCC_LINK_TEST_OPTIONS, GCC_LINK_TEST_OPTIONS):
1582 New variables that affect linking only.
1583 (alpha-dec-osf*): Use those instead of previous change.
1585 1996-08-15 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1587 * Makefile.in (install-arch-indep): Install info/messages.
1589 1996-08-11 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1591 * Version 19.33 released.
1593 1996-08-10 Marcus Daniels <marcus@sayre.sysc.pdx.edu>
1595 * configure.in (i[3456]86-sequent-ptx4*, i[3456]86-sequent-sysv4*):
1596 Fix previous change.
1598 1996-08-08 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1600 * configure.in (i[3456]86-sequent-ptx4*, i[3456]86-sequent-sysv4*):
1603 1996-08-07 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1605 * configure.in (alpha-dec-osf*): Specify GCC_TEST_OPTIONS
1606 and NON_GCC_TEST_OPTIONS.
1608 1996-08-06 Paul Eggert <eggert@twinsun.com>
1610 * configure.in (LOCALTIME_CACHE): Don't put a string literal
1611 "TZ=..." in environ.
1613 1996-08-04 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1615 * make-dist (msdos): Add is_exec.c, sigaction.c to distribution.
1617 1996-08-03 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1619 * configure.in (*-sunos4.1.[3-9]*noshare): Move this before
1620 the more general *-sunos4.1.[3-9]* clause.
1622 1996-07-31 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1624 * Version 19.32 released.
1626 * configure.in (*-sco3.2v5*):
1627 Set OVERRIDE_CPPFLAG to a string of one space.
1628 Fix the code that uses OVERRIDE_CPPFLAG.
1630 1996-07-16 Karl Heuer <kwzh@gnu.ai.mit.edu>
1632 * configure.in: Undo previous change.
1634 1996-07-16 Richard Stallman <rms@whiz-bang.gnu.ai.mit.edu>
1636 * config.sub: Use `pc', not `unknown', when canonicalizing
1637 the vendor for ...86.
1639 1996-07-15 David Mosberger-Tang <davidm@AZStarNet.com>
1641 * configure.in: Check for termios.h header.
1643 1996-07-11 Bill Mann <dvmann@dvncr.praxisint.com>
1645 * configure.in: Use s/usg5-4-3.h for ncr-i[3456]86-sysv4.3
1647 1996-07-07 Karl Heuer <kwzh@gnu.ai.mit.edu>
1649 * configure.in: Split bsdos2 and bsdos2-1.
1651 1996-07-06 Richard Stallman <rms@whiz-bang.gnu.ai.mit.edu>
1653 * config.sub: If last two words are not a recognized
1654 KERNEL-OS pair, use just the last word as OS, as in 19.31.
1655 Make conversion of gnu/linux to linux-gnu really work.
1657 * config.sub: If vendor unspecified with i386, use `pc' not `unknown'.
1659 1996-06-30 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1661 * configure.in (check for using Lucid widgets by default):
1662 Eliminate indentation that confuses some compilers.
1664 1996-06-29 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1666 * config.sub: Convert linux and gnu/linux to linux-gnu.
1668 * make-dist: Don't update getdate.c.
1669 Ignore =... files when checking for too-long Lisp file names.
1671 1996-06-28 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1673 * configure.in (euidaccess): Check for that, not for eaccess.
1675 1996-06-27 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1677 * configure.in (sunos4.1.[3-9]*noshare): Eliminate dash from
1679 (mips-sgi-irix6*): Specify NON_GCC_TEST_OPTIONS.
1681 1996-06-21 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1683 * configure.in: Rename lignux to linux-gnu in configuration names.
1684 Use gnu-linux as the opsys value (s/ file name).
1685 Allow i686 just like i386, i486, i586.
1687 1996-06-20 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1689 * configure.in (i*86-*-sco3.2v5): New alternative.
1690 (OVERRIDE_CPPFLAG): New variable.
1691 (CPPFLAGS): If OVERRIDE_CPPFLAG is set, use that.
1693 * configure.in: Specify vpath for .texi files.
1695 1996-06-09 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1697 * configure.in: Always check for HAVE_X11R5.
1698 Separately decide whether to use a toolkit by default.
1700 1996-06-04 Bill Mann <dvmann@dvhpux1.praxisint.com>
1702 * configure.in: If X11R5 is missing the Xaw headers,
1703 default to --with-x-toolkit=no.
1705 1996-05-31 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1707 * configure.in (powerpc-*-solaris2*): Use ibmrs6000, not rs6000.
1709 1996-05-30 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
1711 * Makefile.in (install-arch-indep): If cd etc makes output,
1712 don't treat that as part of the tar data.
1713 Check that ./lisp actually exists.
1715 1996-05-29 Karl Heuer <kwzh@gnu.ai.mit.edu>
1717 * make-dist: Check for long file names.
1719 1996-05-25 Karl Heuer <kwzh@gnu.ai.mit.edu>
1721 * Version 19.31 released.
1723 1996-05-25 Karl Heuer <kwzh@gnu.ai.mit.edu>
1725 * configure.in: Recognize sparc-*-lignux.
1727 1996-05-03 Richard Stallman <rms@delasyd.gnu.ai.mit.edu>
1729 * make-dist: Include nt/inc/arpa and nt/inc/netinet in the dist.
1730 Don't include config.w95.
1732 1996-04-21 Richard Stallman <rms@delasyd.gnu.ai.mit.edu>
1734 * make-dist: Replace --no-clean-up and --no-tar options
1735 with --clean-up and --tar, so that the default is useful.
1737 1996-04-15 Eli Zaretskii <eliz@is.elta.co.il>
1739 * config.bat: Make sure the GDB init file is called src/_gdbinit;
1740 if not, tell the user to rename it and abort.
1742 1996-04-14 Eli Zaretskii <eliz@is.elta.co.il>
1744 * config.bat: With DJGPP v1.x, use `COFF2EXE' to produce JUNK.EXE
1747 1996-04-12 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1749 * config.bat (djgpp_ver): Variable renamed from djgpp-ver.
1751 * make-dist (MANIFEST): Fix previous change.
1752 (msdos): Put mainmake.v2 into the dist.
1754 1996-04-10 Roland McGrath <roland@charlie-brown.gnu.ai.mit.edu>
1756 * make-dist: Exit if autoconf fails.
1758 1996-04-10 Eli Zaretskii <eliz@is.elta.co.il>
1760 * config.bat: Set djgpp-ver, and unset it at the end.
1761 Add a number of conditionals for DJGPP version 2.
1762 Rename label libsrc2 to libsrc3.
1763 Substitute for LDFLAGS in src/Makefile.
1764 Substitute for ALL_CFLAGS in lib-src/Makefile.
1766 1996-04-08 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1768 * configure.in (ncurses): Check this after checking fns like strerror.
1770 1996-04-08 Erik Naggum <erik@naggum.no>
1772 * make-dist (MANIFEST): Don't include lines from =files.
1774 1996-04-07 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1776 * make-dist: Don't put lisp/dired.todo in the dist.
1778 1996-04-05 Richard Stallman <rms@lucy.gnu.ai.mit.edu>
1780 * configure.in (HAVE_NCURSES): Look for library named ncurses.
1782 * configure.in (setlocale): Check for it.
1784 * configure.in (*-*-sysv4.2*): If no /usr/ccs/lib/cpp, use /lib/cpp.
1786 1996-03-26 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1788 * configure.in: Use lignux instead of linux as value of opsys.
1790 1996-03-22 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1792 * Makefile.in (install-strip): Fix whitespace.
1793 Get rid of continuation.
1795 * config.sub: Convert linux or gnu/linux to lignux.
1797 1996-03-21 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1799 * configure.in: Accept lignux in configuration name.
1801 1996-03-20 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1803 * Makefile.in (install-strip): New target.
1805 1996-03-18 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1807 * Makefile.in (top_distclean): Use `|| true' to ignore error in rm.
1808 -f failed to do the job on Suns.
1810 1996-03-13 Richard Stallman <rms@whiz-bang.gnu.ai.mit.edu>
1812 * Makefile.in (install-arch-dep): Don't depend on install-arch-indep.
1814 * configure.in (linux/version.h): Check for this header.
1816 1996-03-12 Roland McGrath <roland@charlie-brown.gnu.ai.mit.edu>
1818 * configure.in: Remove -fno-builtin hackery from -lm check.
1820 1996-03-08 Roland McGrath <roland@charlie-brown.gnu.ai.mit.edu>
1822 * configure.in (-lm check): If $GCC, append -fno-builtin to $CC for
1825 * configure.in (AC_PREREQ): Require version 2.8 of Autoconf.
1827 1996-03-04 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1829 * configure.in: Check for ncurses.
1831 1996-02-28 Paul Eggert <eggert@twinsun.com>
1833 * configure.in (LOCALTIME_CACHE):
1834 Also define if localtime mishandles unsetting TZ.
1835 This works around a localtime bug in mips-dec-ultrix.
1837 1996-02-25 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1839 * make-dist (finder-inf.el): Use finder-compile-keywords-make-dist.
1841 * configure.in: Improve messages about X versions.
1843 1996-02-24 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1845 * configure.in (LOCALTIME_CACHE): Cope if $ac_cv_func_tzset is null.
1847 1996-02-23 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1849 * configure.in (HAVE_X11XTR6): Set it as a shell variable.
1850 (HAVE_LIBXMU): If HAVE_X11XTR6, use -lSM and -lICE.
1852 * Makefile.in (install-arch-dep): Depend on install-arch-indep.
1853 (install): Put install-arch-indep before install-arch-dep.
1855 1996-02-20 Dave Love <d.love@dl.ac.uk>
1857 * INSTALL: Clarify info about MS-DOS path handling.
1859 1996-02-12 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1861 * Makefile.in (install-arch-indep): Install info/ccmode*.
1862 In previous change, protect against /bin/pwd returning null string.
1864 1996-02-07 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1866 * Makefile.in (install-arch-indep): Copy build-dir's lisp subdir
1869 1996-02-01 Paul Eggert <eggert@twinsun.com>
1871 * configure.in (LD_RUN_PATH): Prepend x_libraries to this envvar.
1873 1996-01-30 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1875 * configure.in (HAVE_TIMEVAL): Set explicitly to `no' if test fails.
1877 1996-01-25 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1879 * Makefile.in (extraclean): Use ${top_distclean} to ensure
1880 we delete everything distclean deletes.
1882 1996-01-23 Karl Heuer <kwzh@gnu.ai.mit.edu>
1884 * make-dist (lwlib): Don't distribute lwlib-Xol* files.
1886 1996-01-17 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1888 * configure.in (HAVE_X11): Merge $LD_SWITCH_X_SITE
1889 into LDFLAGS instead of into LIBS.
1891 1996-01-16 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1893 * configure.in (HAVE_XMU): Fix typo in previous change.
1895 1996-01-15 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1897 * configure.in [Solaris]: Don't let $CC make us use /usr/ucb/cc.
1899 1996-01-10 Erik Naggum <erik@naggum.no>
1901 * configure.in (USE_X_TOOLKIT = maybe): Delete redundant `fi'.
1903 1996-01-10 Karl Heuer <kwzh@gnu.ai.mit.edu>
1905 * Makefile.in (install-arch-indep): Ignore error if no chmod -R.
1907 1996-01-10 Richard Stallman <rms@whiz-bang.gnu.ai.mit.edu>
1909 * configure.in (HAVE_XMU): Check for libXmu.a only if using toolkit
1910 and use -lXt to link it.
1912 1996-01-08 Richard Stallman <rms@whiz-bang.gnu.ai.mit.edu>
1914 * configure.in (locallisppath): Put version-specific dir first.
1916 1996-01-07 Richard Stallman <rms@whiz-bang.gnu.ai.mit.edu>
1918 * configure.in (hppa-*-nextstep*): New alternative.
1919 (USE_X_TOOLKIT): By default, set this to "maybe";
1920 and change that later to LUCID or "no" according to X11 version.
1922 * make-dist: Recompile outdated .elc files and update all autoloads.
1924 1996-01-05 Roland McGrath <roland@churchy.gnu.ai.mit.edu>
1926 * configure.in (locallisppath): Fix typo in last change: " -> '.
1928 1996-01-04 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1930 * configure.in (locallisppath): Add ../emacs/VERSION/site-lisp.
1932 1995-12-27 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1934 * Makefile.in (install-arch-indep): Give all files read permission.
1936 1995-12-26 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1938 * configure.in (hppa*-hp-hpux9shr*, hppa*-hp-hpux9*, hppa*-hp-hpux*):
1939 If it is hpux 9, check for /usr/include/X11R5 and /usr/lib/x11R5.
1941 1995-12-24 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1943 * configure.in: Determine HAVE_X11R6.
1944 (HAVE_MENUS): Renamed from HAVE_X_MENU.
1946 1995-12-21 Richard Stallman <rms@whiz-bang.gnu.ai.mit.edu>
1948 * configure.in: Just "solaris" now defaults to version 2.4.
1949 Add sunos4.1.n-noshare as alternative.
1951 1995-12-01 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1953 * configure.in (mips-sgi-irix6*): Set NON_GNU_CPP.
1955 1995-11-29 Erik Naggum <erik@naggum.no>
1957 * Makefile.in (install-arch-indep): Add missing backslash.
1959 1995-11-29 Karl Eichwalder <ke@ke.Central.DE>
1961 * Makefile.in (install-arch-indep): Don't install
1962 lispdir/[Mm]akefile*, lispdir/ChangeLog, lispdir/dired.todo.
1964 1995-11-29 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1966 * Makefile.in (install-arch-indep): Fix previous change.
1968 * configure.in (mips-sni-sysv*): New alias for mips-siemens-sysv*.
1970 1995-11-24 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1972 * Version 19.30 released.
1974 * make-dist (lisp): Exclude subdirs.el.
1976 1995-11-22 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1978 * make-dist (etc): Delete *.orig and *.rej.
1980 1995-11-16 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1982 * Makefile.in (install-arch-indep): Rename old info/dir only if exists.
1984 1995-11-15 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1986 * configure.in (hppa*-hp-hpux10*): Use s/hpux10.h.
1988 1995-11-14 Geoff Voelker <voelker@cs.washington.edu>
1990 * make-dist (nt): Rename install, readme, and todo to
1991 INSTALL, README, and TODO.
1993 1995-11-10 Richard Stallman <rms@mole.gnu.ai.mit.edu>
1995 * make-dist (lisp): Don't distribute site-start.
1997 1995-11-06 Karl Heuer <kwzh@gnu.ai.mit.edu>
1999 * make-dist: Break the hard link on alloca.c.
2001 1995-11-04 Richard Stallman <rms@whiz-bang.gnu.ai.mit.edu>
2003 * configure.in (LIBS): Add libsrc_libs and keep the old LIBS.
2005 1995-11-02 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2007 * make-dist (src, lib-src): Don't distribute Makefile.c.
2008 (etc/e): Do cleanup in $tempdir/etc/e, not $tempdir/etc.
2010 1995-10-31 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2012 * Makefile.in (mkdir): Create man1dir, not mandir.
2013 (uninstall): Use man1dir, not mandir.
2015 1995-10-30 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2017 * Makefile.in (man1dir): New variable.
2018 (install-arch-indep): Use man1dir.
2020 * configure.in (sparc-*-nextstep*): Remove incorrect .h's.
2022 * make-dist: Create lisp/MANIFEST.
2024 1995-10-28 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2026 * configure.in (m68k-*-linux*): New alternative.
2028 1995-10-27 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2030 * make-dist: Use new names config.in, paths.in, and
2031 {src,lib-src}/Makefile.in.
2033 1995-10-25 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2035 * configure.in: Don't bother checking for drem.
2037 1995-10-20 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2039 * Makefile.in (distclean): Delete line with just a tab in it.
2040 (install-arch-indep): Delete spaces that precede tabs.
2041 Delete spurious `fi' left from previous change.
2042 (install): Supply `true' as command, to avoid null command.
2044 1995-10-05 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2046 * configure.in (--with-x-toolkit)): Add `athen' as alias for `athena'.
2048 1995-09-30 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2050 * configure.in (powerpc-*-solaris2): New alternative.x
2052 1995-09-12 Karl Heuer <kwzh@gnu.ai.mit.edu>
2054 * Makefile.in (src/paths.h, paths-force): Use paths.h.$$ instead
2055 of paths.h.tmp$$, to avoid going beyond 14 characters.
2057 1995-09-10 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2059 * configure.in: Improve error msg for invalid --with-x-toolkit value.
2061 1995-09-06 Paul Eggert <eggert@twinsun.com>
2063 * configure.in (LOCALTIME_CACHE): Define if tzset exists and
2064 if localtime caches TZ. Check for tzset.
2066 1995-09-01 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2068 * config.bat: Simplify using new names file names src/makefile.in,
2069 config.in, paths.in. Change Echo commands not to use `.
2071 1995-08-31 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2073 * Makefile.in (install-arch-indep): Always install the new dir file;
2074 rename the previous dir file to dir.bak or dir.old.
2076 1995-08-14 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2078 * configure.in (RANLIB): Substitute this into makefiles.
2079 Set it specially on solaris; set it by default on other systems.
2081 * configure.in: Fix previous Alpha change.
2083 1995-08-13 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2085 * configure.in (i*386-*-isc4.*): Set GCC_TEST_OPTIONS and
2086 NON_GCC_TEST_OPTIONS.
2088 1995-08-10 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2090 * configure.in (CFLAGS): When computing CFLAGS and REAL_CFLAGS
2091 from config.h, use SPECIFIED_CFLAGS to get what the user specified.
2093 * configure.in (alpha-*-linux*): New configuration.
2095 1995-08-05 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2097 * configure.in (m68*-next-*): Use m68k.h and nextstep.h.
2098 (m68k-next-nextstep*): New alias for that.
2099 (i*86-*-nextstep*): Use nextstep.h.
2100 (sparc-*-nextstep*): New configuration.
2102 1995-08-02 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2104 * configure.in (CPP): Save original CFLAGS value in SPECIFIED_CFLAGS.
2105 And get CFLAGS from config.h if SPECIFIED_CFLAGS is null.
2107 1995-07-27 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2109 * configure.in: Handle sunos4shr by sharing; not like sunos4*.
2110 Determine GETTIMEOFDAY_ONE_ARGUMENT by experiment.
2112 1995-07-18 Mike Long <mike.long@analog.com>
2114 * make-dist: Fix update of finder-inf.el, and byte-compile it.
2116 1995-07-18 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2118 * Makefile.in (src/paths.h, paths-force):
2119 Rename src/paths.h.in to src/paths.in.
2120 (Makefile): Depend on src/Makefile.in, not src/Makefile.in.in.
2122 * configure.in: Rename {src,lib-src}/Makefile.in.in to Makefile.in.
2123 Use Makefile.c for intermediate file.
2124 Rename src/config.h.in to src/config.in.
2126 1995-07-17 Richard Stallman <rms@gnu.ai.mit.edu>
2128 * configure.in (mips-dec-ultrix*): Assume version 4.3.
2129 (mips-dec-ultrix4.[12]): New alternative for old versions.
2131 1995-07-06 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2133 * make-dist: Don't break intra-tree links.
2135 1995-07-06 David J. MacKenzie <djm@geech.gnu.ai.mit.edu>
2137 * configure.in: Put back archlibdir initialization. Require
2138 autoconf 2.4.1 or later.
2140 1995-07-01 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2142 * configure.in: Use sunos4shr normally for Sunos 4.1.[3-9].
2143 (mips-mips-riscos5*): New alternative.
2145 1995-06-29 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2147 * Makefile.in (uninstall, install-arch-indep): Install info/ediff*.
2149 1995-06-27 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2151 * configure.in (bindir, datadir, sharedstatedir, libexecdir)
2152 (mandir, infodir, archlibdir): Initializations deleted.
2154 * configure.in: On hpux9, use hpux9-x11r4.h if we have X11R4.
2155 On hpux9shr, use hpux9shxr4.h.
2157 1995-06-24 Morten Welinder <terra+@cs.cmu.edu>
2159 * configure.in: Added target mips-dec-mach_bsd4.3.
2160 * config.guess: Guess mips-dec-mach_bsd4.3.
2162 1995-06-24 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2164 * Makefile.in (mkdir): Use symbolic chmod.
2166 1995-06-22 Paul Eggert <eggert@twinsun.com>
2168 * configure.in: Treat SunOS 4.1.4 like SunOS 4.1.3.
2169 (Likewise for SunOS 4.1.5 thorugh 4.1.9, should they ever exist.)
2171 1995-06-22 Paul Eggert <eggert@twinsun.com>
2173 * Makefile.in (SUBDIR_MAKEFILES):
2174 Add man/Makefile, so `make distclean' removes it.
2175 (top_distclean): Add config.log to the list of files to be removed.
2177 1995-06-19 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2179 * Version 19.29 released.
2181 1995-06-17 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2183 * configure.in: Fix the previous change to verify that the -b
2184 option really solves the problem.
2186 * make-dist (nt): Explicitly include makefile.nt and makefile.def only.
2188 1995-06-16 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2190 * configure.in: Test whether XFree86 needs -b i486-linuxaout to link.
2192 1995-06-15 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2194 * configure.in: Report more clearly when there is no special
2195 dir to search for X includes or libraries.
2197 1995-06-13 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2199 * configure.in: Check for -lpthreads, not -lpthread.
2201 1995-06-09 Geoff Voelker <voelker@cs.washington.edu>
2203 * make-dist: Copy new files nt/addpm.c and nt/emacs.bat.in.
2205 1995-06-08 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2207 * configure.in: Check for -lpthread.
2209 1995-06-05 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2211 * Makefile.in (install-arch-indep): Install info files for mh-e.
2212 (uninstall): Uninstall info files for dired-x, gnus, mh-e, and sc.
2214 1995-06-01 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2216 * configure.in (*-solaris2.5): New configuration.
2218 * make-dist: Copy new files config.nt and config.w95.
2220 1995-05-30 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2222 * configure.in: Use x_includes, not x_libraries, for -I.
2223 Make bitmapdir a colon-separated list.
2225 1995-05-27 Richard Stallman <rms@gnu.ai.mit.edu>
2227 * configure.in (hppa*-hp-hpux10*, m68k-hp-hpux10*): New configurations.
2229 * configure.in: Allow x_libraries and x_includes to be paths.
2231 1995-05-25 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2233 * configure.in: Fix typo.
2235 1995-05-24 Karl Heuer <kwzh@hal.gnu.ai.mit.edu>
2237 * INSTALL: Clarify use of site-init.el.
2239 1995-05-22 enami tsugutomo <enami@sys.ptg.sony.co.jp>
2241 * configure.in: pass arg to sqrt.
2243 1995-05-18 Karl Heuer <kwzh@hal.gnu.ai.mit.edu>
2245 * make-dist: Fix May 6 change.
2247 1995-05-17 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2249 * vpath.sed: Delete reference to ymakefile.
2251 1995-05-09 David J. MacKenzie <djm@geech.gnu.ai.mit.edu>
2253 * configure.in: Use sqrt (more portable) instead of fmod in -lm
2256 1995-05-09 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2258 * make-dist: Put nt/emacs.ico and nt/emacs.rc in dist.
2260 * update-subdirs: Specify /bin/sh to run the script.
2262 1995-05-06 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2264 * make-dist: Put src/makefile.nt in dist.
2266 * configure.in (i[345]86-*-bsdi2*): New configuration.
2267 (vax-dec-bsd386*): Deleted.
2269 1995-05-06 David J. MacKenzie <djm@geech.gnu.ai.mit.edu>
2271 * configure.in: Make sure CDPATH doesn't mess up PWD check. Check
2272 whether X bitmaps are in X11/bitmaps instead of bitmaps. Use fmod
2273 instead of logb in -lm check.
2275 1995-05-03 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2277 * configure.in (m68*-apollo-*): Renamed from m68*-apollo*.
2278 Use bsd4-3. Don't set NON_GNU_CPP.
2280 * make-dist: Don't copy in src/s/*.inp. Don't copy nt/src.
2281 In nt. copy various different things, but not *.cmd.
2282 Fix the ln commands for the subdirs of nt.
2284 1995-04-29 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2286 * configure.in (*-sun-sunos4.1.3*): Use sunos4shr.h.
2288 1995-04-27 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2290 * configure.in (*-sun-sunos4.1.3*): Use shared libraries,
2291 since that's what the header file expects.
2293 1995-04-24 Francesco Potorti` (pot@cnuce.cnr.it)
2295 * configure.in (m68k-motorola-sysv*): Distinguish between 68030
2296 and 68040 based machines when choosing options for gnucc.
2298 1995-04-13 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2300 * Makefile.in (top_distclean): Delete config.cache.
2302 1995-04-07 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2304 * Makefile.in (install-arch-indep): Delete .#* when copying subdirs.
2306 * configure.in: Use m/ncr386.h.
2308 1995-04-06 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2310 * Makefile.in (install-arch-indep): Undo Sep 23 change.
2312 1995-04-06 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2314 * make-dist (lib-src): Don't copy *.lex; it doesn't exist anymore.
2315 (man): Don't copy texindex.c and getopt.c; they're deleted.
2316 (etc): Omit `e'; it's a subdirectory.
2317 (etc/e): Use `../..', not `..', to reference top level.
2319 1995-04-06 Simon Leinen <simon@lia.di.epfl.ch>
2321 * Makefile.in (install-arch-indep, dist):
2322 look for `update-subdir' in $(srcdir).
2324 1995-04-06 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2326 * make-dist: Include mkinstalldirs in distribution.
2328 1995-04-05 Karl Heuer <kwzh@hal.gnu.ai.mit.edu>
2330 * make-dist: Add missing close backquote.
2332 1995-04-02 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2334 * make-dist: Don't distribute shortnames directory.
2336 1995-03-12 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2338 * Makefile.in (blessmail): Pass archlibdir to the sub-make.
2340 1995-02-25 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2342 * configure.in (m88k-motorola-sysv4*): Use usg5-4-2.
2344 1995-02-23 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2346 * configure.in (EMACS_CONFIG_OPTIONS): Use $ac_configure_args.
2348 1995-02-13 Richard Stallman <rms@pogo.gnu.ai.mit.edu>
2350 * configure.in (mips-sgi-irix6): New configuration.
2352 1995-02-07 Richard Stallman <rms@pogo.gnu.ai.mit.edu>
2354 * Makefile.in (maintainer-clean): Renamed from realclean.
2356 1995-02-02 David J. MacKenzie <djm@geech.gnu.ai.mit.edu>
2358 * configure.in: Create a .gdbinit that sources the real one, if
2359 using a different build directory.
2361 1995-01-23 Karl Heuer <kwzh@hal.gnu.ai.mit.edu>
2363 * configure.in: Check for sys/select.h.
2365 1995-01-02 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2367 * configure.in: On sunos4.1.3 and sunus4shr, set NON_GNU_CPP.
2369 1994-12-27 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2371 * configure.in: Handle isc 4.1 operating system.
2373 1994-12-10 Richard Stallman <rms@kepa>
2375 * configure.in (rs6000-ibm-aix4.1*): New alternative.
2376 (rs6000-ibm-aix4*): New alternative.
2378 1994-12-06 Richard Stallman <rms@kepa>
2380 * configure.in: For SVR4.2, set NON_GNU_CPP if not already set.
2382 1994-11-30 David J. MacKenzie <djm@duality.gnu.ai.mit.edu>
2384 * configure.in: Don't try to make directories that are guaranteed
2387 1994-11-23 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2389 * configure.in: Generate man/Makefile from man/Makefile.in.
2390 Create the man subdir.
2392 * Makefile.in (dvi): Run Make in our man subdir.
2394 * make-dist: Create subdir etc/e.
2396 Put man/Makefile.in in dist, instead of man/Makefile.
2398 1994-11-21 David J. MacKenzie (djm@mole.gnu.ai.mit.edu)
2400 * configure.in: Add --with-pop, --with-kerberos, and
2401 --with-hesiod for movemail.
2403 1994-11-17 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2405 * configure.in (m68*-apollo*): Use s/domain.h.
2407 1994-11-14 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2409 * configure.in (m68*-apollo*): Set NON_GNU_CPP.
2411 1994-11-14 David J. MacKenzie (djm@geech.gnu.ai.mit.edu)
2413 * configure.in: Don't add -I, -L, -R options for cc if their
2414 arguments would be empty.
2416 1994-11-11 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2418 * configure.in (i860-intel-osf1*): New alternative.
2419 (mips-sgi-irix5.[01]*): Distinguish from irix5*.
2420 (mips-sgi-irix*): Now an alias for mips-sgi-irix5*.
2422 1994-11-09 David J. MacKenzie <djm@duality.gnu.ai.mit.edu>
2424 * configure.in: Make h_errno check not use nested functions.
2426 1994-11-09 Richard Stallman <rms@pogo.gnu.ai.mit.edu>
2428 * Makefile.in (install-arch-indep): Delete *.orig in copied dirs.
2430 1994-11-08 Roland McGrath <roland@churchy.gnu.ai.mit.edu>
2432 * Makefile.in (install-arch-indep): Avoid continued comment
2433 swallowing target line.
2435 1994-11-08 David J. MacKenzie (djm@churchy.gnu.ai.mit.edu)
2437 * configure.in: Protect a character class with `changequote'.
2439 1994-11-07 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
2441 * configure.in: Accept `news' as a synonym for `newsos'.
2443 1994-11-03 Karl Heuer <kwzh@hal.gnu.ai.mit.edu>
2445 * Makefile.in: Don't rm files if cd fails.
2447 1994-11-01 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2449 * make-dist: Put nt subdir and its subdirs in the dist.
2450 (lib-src): Put makefile.nt in the dist.
2451 (lisp): Put makefile.nt in the dist.
2453 1994-10-29 David J. MacKenzie (djm@geech.gnu.ai.mit.edu)
2455 * configure.in: Change a stray `[' to `test'.
2457 1994-10-28 David J. MacKenzie <djm@duality.gnu.ai.mit.edu>
2459 * configure.in: Adapt for Autoconf v2. Use the standard argument
2460 parser, host type canonicalizer, X11 finder, and message
2461 printing macros. Use the new macro names. Use `test' instead of `['.
2463 1994-10-26 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2465 * configure.in: Check for getpagesize.
2467 1994-10-17 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2469 * make-dist (msdos): Put sed* in the distribution.
2471 1994-10-17 Morten Welinder <terra@mole.gnu.ai.mit.edu>
2473 * config.bat: New option, `--with-x', for configuring Emacs
2474 for use with the X11 system DesqView/X.
2475 New option, `--no-debug', for compiling Emacs without debug
2476 information thus saving disk space.
2477 (src/config.h, src/paths.h): Use `update' (which is like
2478 `move-if-changed') to change the file.
2479 (src/config.h): When configuring for X11 perform extra changes.
2480 (src/makefile): When configuring for X11 perform extra changes.
2481 (lib-src): Remove temporary files.
2482 (): Check that `sed', `rm', `mv', and `gcc' are available.
2484 1994-10-17 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2486 * Makefile.in (sharedstatedir): Substitute sharedstatedir properly.
2488 * configure.in (bitmapdirs): Default to /usr/include/X11/bitmaps.
2490 1994-10-16 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2492 * configure.in (EMACS_CONFIGURATION): Use $canonical as value.
2494 * configure.in (canonical): Substitute var into makefiles.
2495 (bitmapdir): Likewise.
2497 * Makefile.in (bitmapdir): New variable.
2498 (src/paths.h, paths-force): Edit PATH_BITMAPS.
2500 1994-10-15 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2502 * make-dist: Put update-subdirs and lisp/subdirs.el in the dist.
2504 * Makefile.in (dist, install-arch-indep): Run update-subdirs.
2505 * update-subdirs: New shell script.
2507 1994-10-13 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2509 * Makefile.in (top_distclean): Don't rm build-install.
2510 (SOURCES): Delete build-install.in.
2512 * make-dist: Don't distribute build-ins.in.
2513 * build-ins.in: File deleted.
2515 1994-10-12 David J. MacKenzie (djm@duality.gnu.ai.mit.edu)
2517 * Makefile.in (mkdir): Use mkinstalldirs instead of make-path.
2519 1994-10-11 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2521 * Makefile.in: Use libexecdir and sharedstatedir as appropriate.
2523 * configure.in (libexecdir): Renamed from libdir. New default.
2524 (sharedstatedir): Renamed from statedir. New default.
2525 (datadir): New default.
2527 * make-dist: Don't distribute subdirs.el.
2529 1994-10-07 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2531 * configure.in (eaccess): Check for it.
2533 1994-10-04 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2535 * configure.in (mktime): Check for it.
2537 1994-10-02 Paul Reilly <pmr@geech.gnu.ai.mit.edu>
2539 * configure.in (motif): Add support for usage and option checking.
2541 1994-09-24 Richard Stallman <rms@churchy.gnu.ai.mit.edu>
2543 * configure.in (utimes): Check for it.
2545 1994-09-23 Richard Stallman <rms@churchy.gnu.ai.mit.edu>
2547 * Makefile.in (install-arch-indep): Don't do mkdir here.
2549 1994-09-21 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2551 * configure.in (arm-acorn-riscix1.1*, arm-acorn-riscix1.2*):
2552 riscix.h renamed to acorn.h.
2554 1994-09-21 Michael Ben-Gershon (mybg@cs.huji.ac.il)
2556 * configure.in (arm-acorn-riscix1.1*, arm-acorn-riscix1.2*):
2559 1994-09-21 David J. MacKenzie (djm@geech.gnu.ai.mit.edu)
2561 * configure.in: Remove trailing slashes from srcdir.
2563 1994-09-21 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2565 * configure.in (i[345]86-sequent-ptx*): Handle
2567 1994-09-20 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2569 * Makefile.in (paths-force): Depend on src/paths.h
2571 1994-09-19 Karl Heuer <kwzh@hal.gnu.ai.mit.edu>
2573 * configure.in (config_options): Save all arguments, not just some.
2575 1994-09-18 Karl Heuer <kwzh@hal.gnu.ai.mit.edu>
2577 * Makefile.in (install-arch-indep): Copy DOC-*, not DOC*
2579 * configure.in: Add AC_AIX.
2580 Add checks to set HAVE_STRUCT_UTIMBUF, HAVE_TIMEVAL, HAVE_SELECT.
2582 1994-09-18 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2584 * configure.in (parsing options): Simplify sed command to delete -'s.
2586 1994-09-16 Karl Heuer <kwzh@churchy.gnu.ai.mit.edu>
2588 * configure.in (config_options): New shell variable.
2589 Pass its value to C code in EMACS_CONFIG_OPTIONS.
2591 1994-09-16 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2593 * configure.in (alpha-dec-osf*): New target.
2595 * Makefile.in: Use just one FRC target.
2597 1994-09-15 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2599 * Makefile.in (removenullpaths, paths-force):
2600 Use name paths.h.tmp$$, which depends on the pid.
2602 1994-09-14 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2604 * Makefile.in (removenullpaths, paths-force):
2605 Put paths.h.tmp in top-level dir, not in src.
2607 1994-09-11 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2609 * Version 19.27 released.
2611 1994-09-07 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2613 * Version 19.26 released.
2615 1994-09-04 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2617 * configure.in: Check for lrand48, not rand48.
2619 1994-09-03 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2621 * configure.in (powerpc-ibm-aix3.1*, powerpc-ibm-aix3.2.5)
2622 (powerpc-ibm-aix*): New aliases.
2624 1994-08-21 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2626 * make-dist (src/m, src/s): Put *.inp in distribution.
2628 1994-08-19 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2630 * configure.in: Accept i586 and i486 along with i386.
2632 1994-08-15 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2634 * configure.in: Do compute unexec, LIBX, system_malloc, etc
2635 even if CPP env var was set by the user.
2637 * configure.in (i[34]86-*-*): For SCO 3.2v4, fix NON_GNU_CPP value.
2639 1994-08-14 Jonathan I. Kamens (jik@gza-client1.aktis.com)
2641 * Makefile.in: Uninstall "$(EMACS)", not "emacs".
2643 1994-08-13 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2645 * configure.in (i[34]86-*-*): For SCO 3.2v4, set NON_GNU_CPP.
2647 1994-08-09 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2649 * configure.in: Check more specifically for i*86-sun-sunos.
2651 1994-08-03 Caveh Jalali (caveh@eng.sun.com)
2653 * configure.in: Handle solaris 2.4.
2655 1994-07-27 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2657 * configure.in (rand48): Check for it.
2659 1994-07-26 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2661 * make-dist: Update the info files.
2663 1994-07-25 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2665 * configure.in: Make "checking..." messages' style consistent.
2666 (HAVE_H_ERRNO): New test.
2668 1994-07-24 Richard Stallman <rms@mole.gnu.ai.mit.edu>
2670 * configure.in (i860-*-sysv4*): Set NON_GNU_CC and NON_GNU_CPP.
2672 1994-07-12 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2674 * configure.in (CFLAGS): If the envvar was specified, use that.
2675 And set REAL_CFLAGS from it too.
2677 1994-07-11 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2679 * make-dist: Update finder-inf.el.
2681 1994-07-07 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2683 * make-dist (msdos): Include sed4.inp in dist.
2685 * Makefile.in (libsrc_libs): Var deleted.
2687 1994-07-06 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2689 * Makefile.in (mkdir, removenullpaths): Put g in sed replace commands.
2691 1994-06-26 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2693 * configure.in (mips-sony-newsos4*): New alias.
2695 1994-06-23 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2697 * configure.in (*-convex-bsd*): Set NON_GNU_CPP.
2698 (*-convex-convexos*): Accept this as alias.
2700 1994-06-19 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2702 * configure.in: Get CFLAGS both with and without THIS_IS_CONFIGURE,
2703 for two different uses.
2705 1994-06-15 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2707 * configure.in: Define THIS_IS_CONFIGURE when extracting CFLAGS etc.
2709 1994-06-14 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2711 * make-dist: Put ./BUGS into the distrib.
2713 1994-06-13 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2715 * configure.in: Handle 386 running Solaris 2.
2717 1994-06-06 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2719 * configure.in (mips-siemens-sysv*): Use cpp, not cc -E.
2721 1994-06-05 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2723 * configure.in (mips-sony-newsos*): Use news-risc.h.
2725 * configure.in: Accept bsdi as opsys, like bsd386.
2727 1994-06-01 Morten Welinder (terra@diku.dk)
2729 * config.bat (src/paths.h): Use sed script msdos/sed4.inp.
2731 1994-05-30 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2733 * Version 19.25 released.
2735 * make-dist (shortversion): Don't assume another period follows.
2737 1994-05-27 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2739 * Makefile.in (install-arch-indep): Use /bin/pwd uniformly, not pwd.
2740 (uninstall): Use /bin/pwd.
2742 * Makefile.in (blessmail): Depend on src.
2743 (all): Don't depend on blessmail.
2745 * Makefile.in (src/paths.h): Don't force recomputation.
2746 (paths-force): New target; force recomputation of paths.h.
2747 (all): Depend on paths-force.
2748 (src, lib-src): Depend on src/paths.h.
2750 * configure.in (*-sun-sunos4*): Set GCC_TEST_OPTIONS,
2751 NON_GCC_TEST_OPTIONS.
2753 1994-05-26 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2755 * configure.in: Don't insist on subversions for irix.
2757 1994-05-24 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2759 * configure.in (hppa*-hp-hpux9shr): Move alternative up.
2761 * configure.in (i[34]86-next-*): New alternative.
2763 1994-05-23 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2765 * Version 19.24 released.
2767 * configure.in: New config hppa*-hp-hpux9shr*.
2769 1994-05-22 Morten Welinder (terra@tyr.diku.dk)
2771 * config.bat: Doc fix.
2773 1994-05-21 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2775 * Makefile.in (mostlyclean, clean, distclean, realclean)
2776 (extraclean): Don't act on man subdir if it doesn't exist.
2778 1994-05-20 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2780 * configure.in (GCC_TEST_OPTIONS, NON_GCC_TEST_OPTIONS): New vars.
2781 Use them to set up CC.
2782 (*-sun-sunos4.1.3): Set them.
2784 1994-05-19 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2786 * Makefile.in (lib-src): Don't depend on src/paths.h.
2788 1994-05-18 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2790 * build-ins.in (copydests): Get rid of spurious `-'s.
2792 * configure.in: Define EMACS_CONFIGURATION instead of CONFIGURATION.
2794 1994-05-17 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2796 * Version 19.23 released.
2798 * configure.in [HAVE_X11]: Merge $C_SWITCH_X_SITE into CFLAGS
2799 for the Xlib and Xt checks; then restore old CFLAGS.
2801 1994-05-15 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2803 * configure.in (HAVE_X11XTR6): Add newline before #if.
2804 Add newline after #endif.
2806 1994-05-13 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2808 * configure.in (HAVE_X11XTR6): Arrange to define it.
2810 1994-05-12 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2812 * Makefile.in (install): Depend on blessmail.
2814 1994-05-12 David J. MacKenzie (djm@nutrimat.gnu.ai.mit.edu)
2816 * configure.in (mips-siemens-sysv*): Put quotes around value
2819 1994-05-11 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2821 * Makefile.in (TAGS): Use the makefile in src subdir.
2823 1994-05-10 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
2825 * configure.in (opsys): Recognize `gnu'.
2827 1994-05-10 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2829 * configure.in (using NON_GNU_CPP): Fix test for CPP already set.
2831 1994-05-09 David J. MacKenzie (djm@nutrimat.gnu.ai.mit.edu)
2833 * configure.in: Remove AC_LANG_C call. Not needed with Autoconf
2836 1994-05-08 Morten Welinder (terra@diku.dk)
2838 * config.bat: Forcibly remove "# " style comments from makefiles.
2840 1994-05-08 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2842 * Makefile.in (uninstall): When processing lispdir and etcdir,
2843 do nothing unless it exists and is a directory.
2845 1994-05-06 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2847 * Makefile.in (install-arch-indep): Do install info/dired-x*.
2848 Merge code in from install-doc.
2849 (install-doc): Merge code back into install-arch-indep.
2850 (install-arch-dep): Don't depend on install-doc.
2852 * configure.in (run_in_place): Don't use pwd for archlibdir and docdir.
2854 1994-05-04 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2856 * configure.in (making src/Makefile and lib-src/Makefile):
2857 Split off the autoconf substitutions and don't pass them thru cpp.
2858 (undefs): Use $canonical as well as $configuration.
2860 * make-dist: Distribute lisp/Makefile.
2862 * configure.in: Recognize m88k-dg-dgux5.4.3* and m88k-dg-dgux5.4.2*.
2863 Use lower case names for the s files.
2865 1994-05-03 Morten Welinder (terra@diku.dk)
2867 * config.bat: Added possibility for different file name
2868 transscriptions in lib-src.
2870 1994-05-03 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2872 * Makefile.in (lib-src): Undo previous change.
2873 (blessmail): New target to run maybe-blessmail in lib-src.
2874 (all): Depend on blessmail.
2876 * Makefile.in (lib-src): Depend on src.
2878 1994-04-30 Paul Reilly (pmr@churchy.gnu.ai.mit.edu)
2880 * configure.in (m88k-dg-dgux5.4R3): Use dgux5-4R3.
2881 (m88k-dg-dgux5.4R2): dgux5.4R2.
2883 1994-04-29 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2885 * configure.in (window_system): Restore accidentally deleted code
2886 that uses AC_FIND_X.
2888 * make-dist: Distribute config.bat.
2890 1994-04-29 Morten Welinder (terra@diku.dk)
2892 * config.bat: Corrected the configuration of lib-src
2893 to keep up with configure. Add note about dos version 3
2894 or better needed (djgpp needs that). Add note explaining
2895 that either install in c:/emacs or edit the script.
2896 Don't change to c:/emacs, but assume we're there (to minimize
2897 the number of places to change).
2899 * config.bat: Build-in the first step towards X11 support with
2900 the X11 emulator that exists. At this time it won't work,
2901 and several files are missing.
2903 1994-04-28 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2905 * configure.in: Use m/hp800.h in place of m/hp9000s800.h.
2906 Don't look for -lresolv.
2908 * Makefile.in (lib-src): Depend on src/paths.h.
2910 1994-04-27 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2912 * configure.in: Restore deleted AC_SUBST of `configuration'.
2913 Improve error message for bad --with-x-toolkit value.
2915 * configure.in: Define CONFIGURATION in src/config.h
2916 rather than substituting in src/Makefile.in.
2918 1994-04-26 Karl Heuer (kwzh@hal.gnu.ai.mit.edu)
2920 * Makefile.in (install-doc): New target.
2921 (install-arch-dep): Depend on install-doc.
2922 (mkdir): Create docdir.
2924 1994-04-22 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2926 * configure.in: Test for libresolv.a.
2927 Substitute machfile and opsysfile.
2929 1994-04-22 Karl Heuer (kwzh@hal.gnu.ai.mit.edu)
2931 * Makefile.in (.PHONY, install): Kill reference to obsolete do-install.
2932 (install-arch-dep): Install under the name $(EMACS).
2934 1994-04-21 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2936 * configure.in (version): Use entire value of emacs-version.
2937 (mips-siemens-sysv*): New alternative.
2939 1994-04-19 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2941 * Makefile.in (install-arch-indep): Don't install dired-x*.
2943 1994-04-18 Karl Heuer (kwzh@hal.gnu.ai.mit.edu)
2945 * configure.in (src/Makefile, lib-src/Makefile): Delete ^L.
2946 Fix definition of $undefs.
2948 1994-04-17 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2950 * configure.in (window_system): Obey --with-x11=no and --with-x10=no.
2952 * configure.in (lib-src/Makefile.in): Use src, not lib-src, in -I.
2954 1994-04-16 David J. MacKenzie (djm@nutrimat.gnu.ai.mit.edu)
2956 * configure.in: Call AC_LANG_C, if it's defined, after AC_PREPARE.
2958 1994-04-16 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2960 * configure.in (lib-src/Makefile.in): Make this from Makefile.in.in
2961 and run it thru cpp, as with src/Makefile.in.
2963 * configure.in: Use AC_SET_MAKE.
2965 1994-04-15 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2967 * configure.in (i[34]86-ncr-sysv*): Use usg5-4-2.
2969 1994-04-13 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2971 * Makefile.in (MAKE): Don't just assign it--use @SET_MAKE@.
2973 * configure.in (CFLAGS): Exclude ${CFLAGS} from singlequotes.
2974 (printing the choices): Make the toolkit message unconditional.
2975 (USE_X_TOOLKIT): Use `none', not `no', if none.
2976 (include libsrc_libs): Include config.h, and specify -I for srcdir.
2977 Get rid of temp file foofoo1.
2979 1994-04-13 Karl Heuer (kwzh@hal.gnu.ai.mit.edu)
2981 * configure.in (CFLAGS): Use shell syntax, not Makefile.
2983 1994-04-12 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2985 * configure.in (window_system): If no X, set USE_X_TOOLKIT=no.
2986 (printing the choices): State choice of toolkit.
2987 (libsrc_libs): Recalculate after writing config.h;
2988 then update lib-src/Makefile.
2990 1994-04-11 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2992 * configure.in: Add sunos4shr as alternative for suns.
2993 Conditionals testing for null $CC were backwards.
2995 1994-04-10 Richard Stallman (rms@mole.gnu.ai.mit.edu)
2997 * make-dist (msdos): Don't link patch1. Link sed*.inp, not sed.in*.
2999 1994-04-09 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3001 * configure.in: Handle -isc4.0*.
3003 1994-03-30 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3005 * configure.in (esix5): Set NON_GNU_CPP.
3007 1994-03-24 Roland McGrath (roland@mole.gnu.ai.mit.edu)
3009 * Makefile.in (thisdir): Nonsensical variable removed.
3010 (install-arch-indep): Set shell var thisdir=`pwd` before cd and cd
3011 back to $thisdir, rather than the directory `this_dir'.
3013 1994-03-17 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
3015 * Makefile.in (install-arch-indep): Add missing backslash after a
3018 1994-03-14 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3020 * Makefile.in (thisdir): New variable.
3021 (install-arch-indep): Go back to thisdir to run INSTALL_DATA.
3023 1994-03-08 Karl Heuer (kwzh@hal.gnu.ai.mit.edu)
3025 * configure.in: Add freebsd.
3027 1994-03-08 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
3029 * configure.in: Check for fpathconf.
3031 1994-03-02 Karl Heuer (kwzh@hal.gnu.ai.mit.edu)
3033 * configure.in (with_x_toolkit): Fix typo in previous change.
3035 1994-03-01 Karl Heuer (kwzh@hal.gnu.ai.mit.edu)
3037 * configure.in: New s-file for rs60000-ibm-aix3.2.5.
3039 1994-02-26 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3041 * configure.in (with_x_toolkit): Don't allow motif or open-look.
3043 1994-02-24 Karl Heuer (kwzh@hal.gnu.ai.mit.edu)
3045 * configure.in: Fix value of docdir.
3046 * Makefile.in (install-arch-indep): Install DOC* in docdir.
3048 1994-02-24 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3050 * configure.in (*-sysv4.1): Set NON_GNU_CPP.
3052 1994-02-22 Karl Heuer (kwzh@geech.gnu.ai.mit.edu)
3054 * configure.in: New variable docdir to control where the docstring
3056 Makefile.in: Use it to initialize PATH_DOC in paths.h.
3058 1994-02-22 Karl Heuer (kwzh@mole.gnu.ai.mit.edu)
3060 * configure.in: When --run-in-place, don't inherit archlibdir.
3062 1994-02-19 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3064 * Makefile.in (install-arch-dep, install-arch-indep):
3065 New targets split up former do-install rule.
3066 (do-install): Target deleted.
3068 1994-02-16 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3070 * configure.in (mips-sony-newsos*): New configuration.
3072 1994-02-14 Frederic Pierresteguy (fp@mole.gnu.ai.mit.edu)
3074 * configure.in (rs6000-bull-bosx*): Added support for BULL dpx20.
3076 1994-02-11 Karl Heuer (kwzh@mole.gnu.ai.mit.edu)
3078 * configure.in: Fix misspelled symbol LD_SWITCH_X_SITE_AUX.
3080 1994-02-11 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3082 * configure.in: Don't initialize CC.
3084 1994-02-10 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
3086 * configure.in (creating src/Makefile): Also generate -U switches
3087 for symbols in the $configuration value.
3089 * configure.in: Check for sys_siglist being declared in system header.
3091 1994-02-10 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3093 * configure.in (creating src/Makefile): Delete blank lines
3094 along with lines of whitespace.
3095 (m68k-motorola-sysv*, m68000-motorola-sysv*): Compute proper CC value.
3097 1994-02-09 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3099 * configure.in: Get, use, and substitute C_SWITCH_MACHINE
3100 like C_SWITCH_SYSTEM.
3101 (m68*-motorola-sysv*): Set CC. Require cpu type to be m68k or m68000.
3103 1994-02-04 Karl Heuer (kwzh@mole.gnu.ai.mit.edu)
3105 * configure.in (drem): Check for this function.
3107 1994-02-03 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3109 * configure.in (Using NON_GNU_CPP): Don't lose if it has spaces.
3110 If CPP was inherited from environment, don't use NON_GNU_CPP.
3111 (NON_GNU_CC): Likewise.
3112 (handling with_gcc): Use explicit if in the `no' case.
3113 (cc_specified): New variable; if set, don't use NON_GNU_CC.
3115 1994-02-02 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3117 * configure.in (mips-mips-riscos4*): Set NON_GNU_CPP.
3119 1994-02-01 Karl Heuer (kwzh@mole.gnu.ai.mit.edu)
3121 * configure.in: Check whether fmod exists.
3123 1994-01-31 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
3125 * make-dist: Distribute {src,lisp}/ChangeLog.? instead of
3126 {src,lisp}/OChangeLog.
3128 1994-01-22 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
3130 * configure.in: Restore Jan 8 and Jan 16 changes. The -U hack is
3131 necessary for proper operation. This code works with the current
3132 released version of Autoconf.
3134 1994-01-21 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3136 * configure.in (with_x_toolkit): Treat values athena and lucid alike.
3137 (USE_X_TOOLKIT): Define it for all values except `no'.
3139 * configure.in: Undo first Jan 8 change and Jan 16 change.
3141 1994-01-18 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3143 * configure.in: Handle --with-x-toolkit. Produce lwlib/Makefile.
3144 Substitute USE_X_TOOLKIT as both C macro and Make variable.
3146 * Makefile.in (lwlib/Makefile): New target.
3147 (SUBDIR_MAKEFILES): Depend on lwlib/Makefile.
3148 (clean, mostlyclean, distclean, realclean): Handle lwlib subdir.
3149 (unlock, relock): Handle lwlib subdir.
3151 * Makefile.in: Add some .PHONY targets.
3153 * make-dist: Handle lwlib subdir like oldXMenu subdir.
3155 * lwlib: New subdirectory.
3157 1994-01-17 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3159 * configure.in: If CPP has a value that is a directory,
3162 1994-01-16 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
3164 * configure.in (srcdir_undefs): Add g flag to sed substitution to
3167 1994-01-15 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3169 * Makefile.in (do-install): Install the dired-x info files.
3171 * configure.in: Provide for variable LD_SWITCH_X_SITE_AUX.
3174 1994-01-12 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3176 * configure.in (m68k-harris-cxux*, m88k-harris-cxux*): New configs.
3178 1994-01-08 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
3180 * configure.in (creating src/Makefile): Put code inside 2nd arg to
3181 AC_OUTPUT as it should be; hopefully noone will again see fit to
3182 gratuitously break this and not make a change log entry.
3183 Optimized sed processing of Makefile.in and cpp output; now
3184 preserves comments previously removed from the cpp input.
3185 Eliminated temp file for cpp output. Generate -U switches to
3186 undefine all identifiers that appear in the directory name
3187 ${srcdir}; pass these to cpp.
3189 * configure.in (version): Fix sed regexp to match two-elt version
3192 * configure.in: Check for strerror.
3194 1994-01-07 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3196 * configure.in: Test for bcmp.
3198 1994-01-06 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3200 * make-dist (tempdir): Put subdir msdos into the distribution.
3202 1993-01-07 Morten Welinder (terra@diku.dk)
3204 * config.bat: New file.
3206 1994-01-02 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3208 * Makefile.in (${SUBDIR} target): Pass down LDFLAGS and CPPFLAGS.
3210 1994-01-01 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3212 * configure.in (m68*-next-*): Don't care about which os is specified.
3213 (i[34]86-*-*): Check for *-nextstop*.
3215 1993-12-24 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3217 * configure.in: Check for setsid.
3219 1993-12-17 Richard Stallman (rms@srarc2)
3221 * configure.in (*-sun-solaris*): Add special case for Solaris 2.3.
3223 1993-12-15 Richard Stallman (rms@srarc2)
3225 * Makefile.in (mkdir): Make only the lockdir writable.
3227 * configure.in (i860-*-sysv4): Renamed from i860-*-sysvr4.
3229 1993-12-11 Richard Stallman (rms@srarc2)
3231 * Makefile.in (libdir): Use @libdir@.
3233 1993-12-08 Richard Stallman (rms@srarc2)
3235 * Makefile.in (install): Add empty command.
3237 1993-12-04 Richard Stallman (rms@srarc2)
3239 * make-dist: Put man/getopt.c in the dist.
3241 * configure.in (LIBS): Add test for existence of XSetWMProtocols.
3243 * Makefile.in (install): Depend on ${SUBDIR}, not `all'.
3245 1993-12-03 Richard Stallman (rms@srarc2)
3247 * configure.in (solaris): Set NON_GNU_CPP instead of CPP.
3248 Set it for all solaris versions.
3249 (mips-mips-riscos4*): Set NON_GNU_CC, not CC.
3250 (after checking for GCC): If not GCC, and NON_GNU_CPP is set, set CPP.
3251 Likewise for NON_GNU_CC and CC.
3253 1993-12-01 Richard Stallman (rms@srarc2)
3255 * configure.in (mips-mips-riscos4*): Assign variable CC.
3256 (checking ${with_gcc}): If "no", don't override CC if already set.
3257 (CC): Initialize it as empty.
3259 1993-11-30 Richard Stallman (rms at srarc2)
3261 * configure.in (Suns): Set CPP if *-solaris2.3*.
3263 1993-11-27 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3265 * Version 19.22 released.
3267 * Makefile.in (do-install): Use umask 022 in copying etc and lisp dirs.
3269 1993-11-25 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3271 * make-dist: When breaking links, use cp -p.
3272 Copy install.sh into distribution.
3273 Move the temp dir up into the parent dir;
3274 don't leave the staging dir make-dist.tmp... in existence.
3275 * install.sh: New file.
3277 1993-11-21 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3279 * configure.in (i[34]86-ncr-sysv*): New specific alternative.
3281 1993-11-20 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3283 * configure.in (version): When --run-in-place, exclude
3284 ${datadir}/emacs/site-lisp from locallisppath.
3286 1993-11-18 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3288 * configure.in: Delete jumk.c before writing it.
3290 1993-11-16 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3292 * Version 19.21 released.
3294 * Makefile.in (mkdir): Ignore error from chmod.
3296 1993-11-15 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3298 * make-dist: Don't put lisp/forms.README in the distribution.
3300 1993-11-13 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3302 * configure.in (creating src/Makefile): Before running cpp,
3303 discard all lines that start with `# Generated' or /**/#.
3305 1993-11-11 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3307 * Version 19.20 released.
3309 * make-dist: Use build-ins.in, not build-install.in.
3310 Don't bother updating TAGS since it's not included.
3312 * build-ins.in: Renamed from build-install.in.
3314 1993-11-10 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3316 * make-dist: Don't try to link *.texinfo--there are none now.
3317 When running make in lib-src, specify YACC var value.
3319 1993-10-03 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
3321 * configure.in (extrasub): Add vpath patterns for %.[yls].
3323 * configure.in: Don't do seddery on config.status after AC_OUTPUT.
3324 Instead just include the commands to make src/Makefile as the
3325 second arg to AC_OUTPUT.
3327 * configure.in: Use : instead of dnl for comment inside
3330 * configure.in: No longer use vpath_sed. Instead, when we notice
3331 srcdir already configured, set extrasub to hack vpath in the
3334 * configure.in: In cmds to make src/Makefile, chmod Makefile.new
3336 * Makefile.in (VPATH): Define to @srcdir@.
3338 1993-09-28 Brian Fox (bfox@cubit)
3340 * configure.in: Don't copy ${srcdir}/src/Makefile.in; that file
3341 doesn't exist. Just copy src/Makefile.in instead. Touch
3342 all of the Makefiles after editing config.status.
3344 * INSTALL: Update documentation to match new configuration
3347 1993-09-27 Brian Fox (bfox@ai.mit.edu)
3349 * configure.in: Allow any of the path or directory Makefile
3350 variables to be set with flags to configure. Create all Makefiles
3351 at configure time. Edit special commands into config.status after
3352 src/Makefile.in is built from src/Makefile.
3354 * Makefile.in (src/Makefile, lib-src/Makefile, oldXMenu/Makefile):
3355 If these files are out of date, simply have config.status
3356 rebuild them; don't rebuild them explicitly.
3358 1993-09-25 Brian Fox (bfox@ai.mit.edu)
3360 * build-install.in: Change src/xemacs to src/emacs. We no longer
3361 create src/xemacs, so the file wouldn't be found.
3363 * make-dist: Remove `src/ymakefile', add `src/Makefile.in.in'.
3365 1993-09-24 Brian Fox (bfox@albert.gnu.ai.mit.edu)
3367 * configure.in: Avoid forcing the search of /usr/include before
3368 fixed include files by resetting C_SWITCH_X_SITE if it is
3371 1993-09-20 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3373 * Makefile.in (@rip_paths@locallisppath):
3374 Delete ${datadir}/emacs/site-lisp.
3376 1993-09-15 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
3379 Use AC_QUOTE_SQUOTE twice to properly quote vpath_sed value.
3380 Remove ${extra_output} from AC_OUTPUT call.
3382 1993-09-17 Brian Fox (bfox@inferno)
3384 * make-dist: Quote backquotes found in strings to be echoed.
3386 * configure.in: Use "sh -c pwd" when we want to avoid having the
3387 shell fix up the value of $PWD.
3389 1993-09-13 Brian Fox (bfox@inferno)
3391 * Makefile.in (do-install): Don't abort if ln or chmod at the end
3392 of the installation fail. Suggested by Karl Berry.
3394 1993-08-30 Brian Fox (bfox@inferno)
3396 * Makefile.in (*clean): Use "$(MAKE) $(MAKEFLAGS)" wherever "make"
3397 was used. Set MAKEFLAGS from MFLAGS.
3399 1993-09-16 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3401 * configure.in: Test for res_init in libc.
3403 1993-09-13 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3405 * configure.in: In the file ${tempcname}, use configure___
3406 instead of @configure@.
3408 1993-09-12 Roland McGrath (roland@sugar-bombs.gnu.ai.mit.edu)
3410 * make-dist: Dist vpath.sed
3412 * Makefile.in (lib-src/Makefile, src/Makefile, oldXMenu/Makefile):
3413 Depend on vpath.sed.
3414 Replace sed comand for VPATH with @vpath_sed@.
3416 * configure.in: Substitute variable `vpath_sed'.
3417 If not in $srcdir and $srcdir is configured,
3418 issue warning that GNU make is required,
3419 and set vpath_sed to use vpath.sed script.
3421 1993-09-10 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
3423 * configure.in: Remove check for $srcdir being configured. This
3424 pretty much works now.
3425 Grok {m68*-hp,i[34]86-*}-netbsd* and set opsys=netbsd.
3426 Check for XFree86 (/usr/X386/include) independent of whether
3429 * Makefile.in (info, dvi, clean, mostlyclean, distclean,
3430 realclean, unlock, relock): Use `$(MAKE)' in place of plain
3433 1993-08-14 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3435 * Version 19.19 released.
3437 * configure.in (i386-*-sunos4): Assume Sunos 4.0.
3439 1993-08-13 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3441 * configure.in: Check for XScreenNumberOfScreen.
3443 1993-08-12 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3445 * configure.in: Add * to end of all configuration alternatives.
3446 (m68*-sony-newsos3*): New alternative.
3448 1993-08-11 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3450 * make-dist: Include getdate.c in distribution.
3452 * configure.in: For --help, use $PAGER if it is set.
3453 (LIB_X11_LIB): Default to -lX11.
3454 (mips-sgi-irix5.*): New alternative.
3456 * Makefile.in (do-install): Install info/gnus* and info/sc*.
3458 * configure.in (m68*-hp-hpux*, hppa*-hp-hpux*):
3459 Recognize *.B8.* as hpux version 8.
3460 (m68*-tektronix-bsd*): Fix typo in tek4300.
3461 (AC_HAVE_FUNCS): Add ftime.
3463 1993-08-10 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3465 * configure.in (m88k-tektronix-sysv3*): Added the missing *.
3466 Use tekxd88, not tekXD88.
3468 1993-08-10 Roland McGrath (roland@churchy.gnu.ai.mit.edu)
3470 * configure.in: Check for -lm. Then can check for frexp and logb.
3472 1993-08-08 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3474 * Version 19.18 released.
3476 * make-dist (src): Don't put gnu-hp300 in dist.
3477 (src, lisp): Include OChangeLog in dist.
3479 1993-08-08 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3481 * configure.in: Test for presence of logb and frexp functions.
3483 1993-08-05 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3485 * configure.in (machine): Add i370-ibm-aix*.
3487 1993-08-03 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3489 * configure.in (function checks): Test for mkdir and rmdir.
3491 * configure.in (function checks): Don't test for random and bcopy
3492 only when we're building with X; look for them all the time.
3494 1993-07-30 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3496 * configure.in: Test for availability of bcopy functions, searching
3497 the X libraries if we're using X.
3499 * configure.in: Test for the presence of/usr/lpp/X11/bin/smt.exp,
3500 and #define HAVE_AIX_SMT_EXP if we do. This is present in some
3501 versions of AIX, and needs to be passed to the loader.
3503 * configure.in: Test for the availablility of the
3504 XScreenResourceString function.
3506 1993-07-30 David J. MacKenzie (djm@frob.eng.umd.edu)
3508 * configure.in: If we found X on our own, set C_SWITCH_X_SITE and
3509 LD_SWITCH_X_SITE and assume --with-x11.
3510 Only look for X11 files if we weren't told about a window system
3511 or if we were told to use X11 but not told where.
3512 Search the libraries from the s and/or m files when checking for
3515 * configure.in: Remove any trailing slashes in prefix and exec_prefix.
3517 1993-07-27 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3519 * make-dist: Include lisp/dired.todo in the distribution.
3521 1993-07-23 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3523 * configure.in: Add code to set HAVE_INET_SOCKETS.
3525 1993-07-21 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3527 * configure.in: If we do find x_includes and x_libraries
3528 via AC_FIND_X, set C_SWITCH_X_SITE and LD_SWITCH_X_SITE.
3530 1993-07-19 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3532 * make-dist: Include src/gnu-hp300 in the dist.
3534 * configure.in (canonical): New variable holds the canonicalized
3535 configuration. Don't alter `configuration'. Use `configuration'
3536 for Makefile.in for file naming.
3537 (testing x_includes and x_libraries): Use =, not ==.
3539 1993-07-17 Jim Blandy (jimb@totoro.cs.oberlin.edu)
3541 * Version 19.17 released.
3543 * Makefile.in (src/Makefile): Propagate C_SWITCH_SYSTEM to the src
3544 directory's makefile. This allows the invocation of CPP which
3545 builds xmakefile to receive these switches. The SunSoft C
3546 preprocessor inserts spaces between tokens if it doesn't get the
3547 -Xs flag requested in src/s/sol2.h.
3549 1993-07-12 Frederic Pierresteguy (F.Pierresteguy@frcl.bull.fr)
3551 * configure.in (m68k-bull-sysv3): new config.
3553 1993-07-10 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3555 * configure.in: Use the autoconf AC_FIND_X macro to try to find
3556 the X Windows libraries.
3558 1993-07-07 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3560 * make-dist (tempdir): Don't create lisp/forms-mode directory in
3561 the distribution. Those files aren't kept in their own
3562 subdirectory any more.
3564 1993-07-06 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3566 * Version 19.16 released.
3568 1993-06-23 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3570 * configure.in: Add --verbose flag.
3572 1993-06-19 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3574 * version 19.15 released.
3576 1993-06-18 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3578 * Makefile.in (top_distclean): Use -f switch when cleaning out
3579 lock dir; it might be empty.
3581 * configure.in: Only check for -lXbsd once.
3583 1993-06-17 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3585 * Version 19.14 released.
3587 1993-06-17 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3589 * make-dist: If using gzip, create distribution with '.gz' extension.
3591 * make-dist (lisp/term): This doesn't have a ChangeLog anymore.
3592 (lisp/forms-mode): This doesn't exist anymore.
3594 * configure.in: Look for the closedir function.
3596 1993-06-16 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3598 * configure.in (CPP): Autoconf sets this to a shell variable
3599 reference, which doesn't work when it's edited into a makefile.
3600 Expand that variable reference.
3602 * Makefile.in (CPP): New variable.
3603 (src/Makefile): Edit CPP into src/Makefile.
3605 * Makefile.in (src/Makefile): Don't bother exiting single quotes
3606 and entering double quotes to get the values of LD_SWITCH_X_SITE
3607 and the other make variables; make substitutes them in anyway.
3609 * Makefile.in (uninstall): Don't remove the lisp and etc
3610 directories if they're in the source tree.
3612 Bring mumbleclean targets into conformance with GNU coding standards.
3613 * Makefile.in (mostlyclean, clean): Separate these two; just have
3614 them pass the request to the subdirectory makefiles.
3615 (distclean): Pass the request down, and then get rid of the
3616 files configure built, and get rid of the Makefiles.
3617 (realclean): Pass the request down, and then do the same things
3619 (uninstall, info, dvi): New targets.
3621 * configure.in: Move clause for PC-compatible i386 box to the end
3622 of the case statement, to avoid masking configurations below.
3624 * configure.in: Add case for m88k-motorola-sysv4.
3626 * configure.in: Add support for HP/UX versions 7, 8, and 9 on
3627 the HP 68000 machines.
3629 * configure.in: Put the arguments to LD_SWITCH_X_SITE's and
3630 C_SWITCH_X_SITE's -L and -I switches in quotes, so the
3631 preprocessor won't fiddle with them.
3633 1993-06-13 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3635 * Makefile.in (TAGS): cd to src to run etags.
3637 1993-06-12 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3639 * configure.in (version): Check the X libraries for XrmSetDatabase
3640 and random, and see if we have -lXbsd.
3642 1993-06-11 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3644 * configure.in: Pass "-Isrc" to the CPP we run to examine the
3645 s/*.h and m/*.h files. Martin Tomes
3646 <mt00@controls.eurotherm.co.uk> says ISC Unix 3.0.1 needs it.
3648 1993-06-10 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3650 * configure.in: Move i386-prime-sysv* and i386-sequent-bsd*
3651 above the general i386 alternative.
3653 1993-06-10 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3655 * configure.in: Recognize configuration name for Data General
3658 * configure.in: Use AC_LONG_FILE_NAMES.
3660 1993-06-09 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3662 * configure.in: Test for bison.
3663 * Makefile.in (YACC): New variable.
3664 (lib-src/Makefile.in): Edit YACC into the makefile.
3666 1993-06-08 Jim Blandy (jimb@totoro.cs.oberlin.edu)
3668 * Version 19.13 released.
3670 * configure.in (CFLAGS): Don't set this according to the value of
3671 the GCC shell variable. Instead, consult the machine and system
3672 files for the values of C_OPTIMIZE_SWITCH and C_DEBUG_SWITCH, and
3673 test __GNUC__ while we're at it.
3675 * configure.in: Remove extra ;; from hpux cases.
3677 1993-06-07 Jim Blandy (jimb@totoro.cs.oberlin.edu)
3679 * configure.in: Check to see if the system has -ldnet.
3681 1993-06-08 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3683 * make-dist: Add clauses to distribute lisp/forms-mode.
3685 1993-06-07 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3687 * configure.in (machine): Fix the versions in hpux version number test.
3688 Do not guess based on cpu type. Do check for explicit system version.
3690 1993-06-03 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3692 * configure.in: Do NOT look for `unknown' as company name.
3694 1993-06-02 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3696 * configure.in: Fix typo in message.
3698 1993-06-01 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3700 * Version 19.12 released.
3702 * Makefile.in (do-install): Correct previous etc-copying change.
3703 Partially rewrite using `if'.
3704 (src/Makefile): Insert --x-libraries option into LD_SWITCH_X_SITE.
3706 * Version 19.11 released.
3708 * configure.in: Handle 386bsd.
3710 1993-05-31 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3712 * make-dist: Update getdate.c.
3714 * configure.in: Handle bsd386.
3716 * Makefile.in (do-install): Use `-' in tar options.
3718 * configure.in: Change ! "${...}" to x"${...}" = x.
3720 * Makefile.in (do-install): Copy the DOC-* files from the build
3721 etc directory, as well as lots of things from ${srcdir}/etc.
3723 * make-dist: Copy config.guess.
3725 * configure.in: Handle AIX versions 1.2, 1.3.
3727 1993-05-30 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3729 * configure.in: Use s/bsd4-3.h for mips-mips-riscos4, and add
3730 the configuration name mips-mips-usg* to represent USG systems.
3732 * configure.in: Fix logic to detect if srcdir is already configured.
3734 * Makefile.in: Pass in LD_SWITCH_X_SITE.
3736 * Makefile.in (mkdir, clean, mostlyclean, do-install): Use `(cd
3737 foo && pwd)` instead of `(cd foo ; pwd)` to get the canonical name
3738 of a directory; cd might fail, and have pwd print out the current
3741 1993-05-30 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3743 * configure.in: When looking for sources, use '.', not `.`. Also '..'.
3745 1993-05-30 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3747 * configure.in: Complain if srcdir points at an already-configured
3750 1993-05-30 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3752 * Version 19.10 released.
3754 1993-05-29 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3756 * Makefile.in: Use Makefile comments, not C comments.
3758 * configure.in: Add case for the Tektronix XD88.
3760 1993-05-29 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3762 * configure.in: Handle sysv4.2 and sysvr4.2.
3764 1993-05-29 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3766 * configure.in: Traverse the argument list without destroying it;
3767 don't use shift. It turns out that "set - ${saved_arguments}"
3768 doesn't work portably.
3770 * configure.in: Add missing "fi".
3772 * make-dist: Rebuild configure if configure.in is newer.
3774 * Makefile.in (src:, lib-src:, FRC:): force the src and lib-src
3775 targets to be executed even if make remembers that it has already
3778 1993-05-29 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3780 * Makefile.in (do-install): Delete redundant code to copy etc twice.
3782 * configure.in (romp): Handle various version numbers with aos and bsd.
3784 1993-05-28 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3786 * configure.in: Fix message text.
3788 1993-05-28 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3790 * make-dist: Make a `site-lisp' directory in the distribution,
3791 instead of a `local-lisp' directory, which hasn't been the
3792 appropriate name for a long time.
3793 * Makefile.in (@rip_paths@locallisppath): Use site-lisp directory
3794 from the distribution first, then /usr/local/lib/emacs/site-lisp.
3796 * Makefile.in (do-install): Correctly detect if ./etc and
3797 ${srcdir}/etc are the same.
3799 * configure.in: Extract UNEXEC from the system configuration
3800 files, compute the name of the source file corresponding to the
3801 object file, and #define it as UNEXEC_SRC in config.h.
3803 * configure.in: If srcdir is '.', then try using PWD to make it
3806 * configure.in: Include ${srcdir} in the printed report, to help
3807 people notice if it's an automounter path.
3809 1993-05-27 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3811 * configure.in (prefix): Don't run pwd on srcdir unnecessarily.
3813 1993-05-27 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3815 * Makefile.in (do-install): Delete the dest dir, not the source dir,
3816 when they are different. Add `shift' command.
3817 (COPYDESTS, COPYDIR): Delete external-lisp dir.
3818 (externallispdir): Var deleted.
3820 * configure.in: Delete spurious paren outputting short_usage.
3822 1993-05-27 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3824 * Version 19.9 released.
3826 1993-05-26 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3828 * Makefile.in (${SUBDIR}): Pass the value of the make variable to
3831 * make-dist: Check for .elc files with no corresponding .el file.
3833 * Makefile.in (mkdir): Make all the directories in locallisppath.
3835 * config.guess: New file.
3836 * configure.in: Use it, tentatively.
3837 * INSTNALL: Mention its usage.
3839 * configure.in (hppa-hp-hpux): Use uname -r instead of uname -m;
3840 the former gives you the operating system rev directly. Use
3841 s/hpux.h if we don't recognize what we got.
3843 * Makefile.in (do-install): Don't remove a destination directory
3844 if it's the same as the source. If ${srcdir}/info == ${infodir},
3845 don't try to copy the info files.
3847 * Makefile.in (COPYDIR, COPYDESTS): Don't mention etc twice; this
3848 doesn't work if you're not using a separate source directory.
3849 (do-install): Copy the build tree's etc directory only after
3850 making sure it's not also the source tree's etc directory.
3852 1993-05-26 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3854 * configure.in: Handle sunos4.1.3 specially.
3856 1993-05-25 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3858 * Makefile.in (INSTALL): Add definition.
3860 * configure.in: Fix some messages. Support -with-gnu-cc.
3861 At the end, use `set --', not `set -'.
3862 Delete spurious `.h' in hpux alternatives.
3864 1993-05-25 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3866 * Version 19.8 released.
3868 1993-05-25 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3870 * configure.in: When looking for source in the same directory as
3871 the configure script, make the path thus discovered absolute.
3872 If the user specifies the `--srcdir' switch, make that directory
3875 * Makefile.in (srcdir): Remove comment saying this doesn't work.
3877 * Makefile.in (src/paths.h): Edit the `infodir' variable into this
3878 too, as the value of the PATH_INFO macro.
3880 * configure.in: Check to see if the source lives in the same
3881 directory as the configure script.
3883 1993-05-24 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3885 * Makefile.in (install): Split this into `install' and
3886 `do-install', to give people more control over exactly what gets
3888 (do-install): New target, containing the guts of `install'. Don't
3889 remove and recreate the directories inside the copying loop - do
3890 it all before the copying loop. Pass more flags to the lib-src
3892 (mkdir): Create ${infodir}, ${mandir}, and ${sitelispdir} here, to
3893 avoid errors and warnings.
3895 * configure.in: For generic IBM PC boxes, insist on "unknown" for
3896 the manufacturer - the more general case was blocking other i386
3897 configuration names below, and that's how the names are written in
3900 * make-dist: When breaking links, remove the link before moving
3901 the copy onto it, to avoid interactive behavior.
3903 * Makefile.in: Doc fix.
3905 * configure.in: Doc fix.
3907 * INSTALL: Mention --exec-prefix option.
3909 * configure.in: Add support for the `--exec-prefix' option.
3910 * Makefile.in: Accept that support.
3912 * configure.in: Use the AC_PROG_INSTALL macro.
3913 * Makefile.in (INSTALL): Variable removed.
3914 (INSTALL_PROGRAM, INSTALL_DATA): Accept these values from configure.
3916 * configure.in: Distinguish between hp800's and hp700's by calling
3919 1993-05-24 Richard Stallman (rms@mole.gnu.ai.mit.edu)
3921 * configure.in: Recognize configuration names for i860 boxes
3924 1993-05-23 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3926 * configure.in: Distinguish between hp800's and hp700's by the
3927 version of HP/UX they run, since that's something people are more
3928 likely to know - hp700's run 8.0.
3929 Add HP 700 configuration.
3931 * configure.in: Test for the presence of the `rename' function.
3933 * Makefile.in (C_SWITCH_X_SITE): New variable - get this from
3935 (oldXMenu/Makefile): Edit C_SWITCH_X_SITE into this.
3937 * make-dist: Break intra-tree links.
3939 * configure.in: Explain that this is an autoconf script, and give
3940 instructions for rebuilding configure from it. Arrange to put
3941 comments in configure explaining this too.
3943 * configure.in: Make the first line of the configure script be
3944 "#!/bin/sh". Leaving the first line blank didn't work.
3946 * configure.in (long_usage): Removed; made short_usage describe
3947 the options briefly.
3949 * configure.in: Implement the --prefix option.
3950 * Makefile.in (prefix): Add support for it here.
3951 * INSTALL: Document it here.
3953 * Makefile.in (install): Don't assume that the files in the `info'
3954 subdirectory match *.info. They don't have that prefix.
3956 1993-05-22 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3958 * configure.in: Add case for version 5 of Esix.
3960 1993-05-22 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3962 * Version 19.7 released.
3964 * make-dist: There aren't any *.com files in lib-src anymore.
3966 * make-dist: Copy texinfo.tex and texindex.c, rather than linking
3967 them; they're symlinks to other filesystems on the GNU machines.
3969 * make-dist: Check that the manual reflects the same version of
3970 Emacs as stated in lisp/version.el. Edit that version number into
3973 1993-05-21 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
3975 * configure.in: Remove the hack of AC_DEFINE; use
3978 1993-05-20 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3980 * make-dist: Don't distribute precomp.com, compile.com, or
3981 link.com from ./src; they're in ./vms now.
3983 Some time-handling patches from Paul Eggert:
3984 * configure.in: Add AC_TIMEZONE.
3986 1993-05-19 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3988 * configure.in: Recognize Linux as a valid operating system for
3991 1993-05-18 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
3993 * make-dist: Distribute some VMS files we got from Richard Levitte.
3995 * Makefile.in (oldXMenu/Makefile): Take oldXMenu/Makefile.in as
3996 the source for the sed command, not oldXMenu/Makefile.
3998 1993-05-17 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4000 * INSTALL: Don't claim the srcdir option doesn't work.
4002 1993-05-16 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4004 * configure.in: Include remarks saying what order the autoconf
4005 tests should go in, and remind people to change config.h.in
4006 whenever they add autoconf tests which make #definitions.
4008 * make-dist: Distribute oldXMenu/Makefile.in, not oldXMenu/Makefile.
4010 1993-05-15 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
4012 * Makefile.in (oldXMenu/Makefile): Make this depend on
4013 ${srcdir}/oldXMenu/Makefile.in, not itself.
4015 * PROBLEMS: Some updates from David J. Mackenzie.
4017 More changes from David J. Mackenzie.
4018 * Makefile.in (install.sysv, install.xenix, install.aix): Targets
4019 removed; autoconf and config.h should specify all these
4021 (buildlisppath): Make this path depend on ${srcdir}.
4022 (INSTALLFLAGS): Removed.
4023 (INSTALL): Include the -c flag.
4024 (install): Change the way we invoke install accordingly.
4026 Install ${srcdir} changes from DJM.
4027 * Makefile.in (SUBDIR_MAKEFILES): Add oldXMenu/Makefile to this
4029 (COPYDIR, COPYDESTS): Install files from both the etc directory in
4030 the source tree and the etc directory in the object tree.
4031 (${SUBDIR}): Pass the prefix variable down to submakes.
4032 (everywhere): Use `sed', not `/bin/sed'. Not all systems have sed
4034 (lib-src/Makefile, src/Makefile, oldXMenu/Makefile): Edit in
4035 values for srcdir and VPATH.
4036 (install): Add `v' flag to tar command. Make sure that `dir'
4037 exists in ${srcdir}/info before copying it. Remember that the man
4038 pages come from the source tree, not the object tree.
4039 * configure.in: Remove remarks saying that the --srcdir option
4041 Create the etc directory in the object tree.
4042 Recognize configuration names of the form *-sun-solaris*.
4043 Recognize sunos5 and solaris as operating system names.
4045 * configure.in: Use the AC_TIME_WITH_SYS_TIME macro, for
4046 lib-src/getdate.y and src/systime.h.
4048 1993-05-15 Richard Stallman (rms@mole.gnu.ai.mit.edu)
4050 * make-dist: Make links in info subdir.
4052 1993-05-13 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4054 * configure.in: Call AC_STDC_HEADERS.
4056 1993-05-10 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
4058 * configure.in: Sidestep autoconf's quoting of the second argument
4059 of AC_DEFINE, so we can specify the value to put there. It would
4060 be nice if autoconf provided some way to specify computed values
4063 1993-05-09 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4065 * Makefile.in (DEFS): Deleted; since we're using AC_CONFIG_HEADER,
4066 this is always just -DHAVE_CONFIG_H.
4068 The GNU coding standards specify that CFLAGS should be left for
4070 * Makefile.in (CFLAGS): Let configure determine the default value
4072 have it default to DEFS.
4073 (${SUBDIR}): Pass CFLAGS down to submakes, not DEFS.
4074 (lib-src/Makefile, src/Makefile): Edit the default value for
4075 CFLAGS into these files, not DEFS.
4076 * configure.in (CFLAGS): Choose a default value for this - "-g"
4077 normally, or "-g -O" if we're using GCC. Edit it into the
4080 * configure.in: When scanning the machine and system description
4081 #include files, write their names to conftest.c properly.
4083 1993-05-07 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4085 * configure.in: In configuration name case for Apallos running
4086 Domainios, set opsys, not opsysfile.
4088 * configure.in: Use the autoconf AC_CONFIG_HEADER macro to produce
4089 src/config.h, instead of AC_OUTPUT; the latter overwrites
4090 src/config.h even when it hasn't changed, puts a makefile-style
4091 comment at the top even though it's C code, and produces a
4092 config.status script which doesn't do the job right.
4094 * configure.in: Add AC_LN_S test, so we can tell whether or not we
4095 can use a symbolic link to get the X Menu library into src.
4096 * Makefile.in (LN_S): New variable.
4097 (src/Makefile): Edit the value of LN_S into this makefile.
4099 1993-05-06 Richard Stallman (rms@mole.gnu.ai.mit.edu)
4101 * configure.in: Support *-sco3.2v4* as opsystem.
4103 * make-dist: Don't include calc directory.
4104 Exclude many files in the man directory; copy a few.
4106 1993-05-04 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
4108 * configure.in: Use AC_HAVE_HEADERS to test for sys/time.h, and
4109 call AC_STRUCT_TM to see what's in time.h.
4111 * configure.in: Employ quoting stupidity to get the value of CPP
4114 1993-04-27 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4116 * configure.in: Use the AC_PROG_CPP macro, and then use the CPP
4117 variable to scan the machine and system description files.
4119 * configure.in: Use the AC_HAVE_HEADERS to check for sys/timeb.h,
4120 so that getdate.y builds correctly.
4122 1993-04-26 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4124 * configure.in (tempcname): Change this to "conftest.c", so it will
4125 work properly on systems with short filenames; this is the name
4128 * configure.in: Also detect the availability of dup2 and
4131 * configure.in: Use the AC_ALLOCA test.
4132 * Makefile.in (ALLOCA): New variable, to be set by ./configure.
4133 (lib-src/Makefile): Edit the value of ALLOCA into lib-src/Makefile.
4135 1993-04-24 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4137 * make-dist: Distribute configure, as well as configure.in.
4140 1993-04-23 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4142 * Makefile.in (install): Print out the name of the directory we're
4143 copying, so people can have some idea of whether we're making
4146 * Makefile.in (install.aix, install.xenix, install.sysv, install):
4147 Don't forget to re-create the COPYDESTS directories after we clear
4150 1993-04-13 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4152 * Makefile.in: Add autoconf cookies so that the configure
4153 script can comment out sections of path variable definitions to
4154 choose between the installable configuration and the run-in-place
4156 * configure.in: Add new option `--run-in-place', to select the
4157 run-in-place path definitions.
4159 * configure.in: Add a clause to the big configuration name case
4160 for the NeXT machine.
4162 1993-04-12 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4164 * Makefile.in (install, install.sysv, install.xenix, install.aix):
4165 Make sure that each source directory exists, and is different from
4166 the destination directory; then, delete the destination before
4167 copying over the source.
4169 * make-dist: Distribute configure.in, instead of configure.
4171 1993-04-10 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
4173 * configure.in: Don't set CC to "gcc -O" if the user specifies
4174 `--with-gcc'. Add -O to DEFS if GCC is set.
4176 1993-04-09 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4178 * Makefile.in (clean mostlyclean): Missing right paren.
4180 * configure.in: When checking for X windows, search for an X11
4181 subdirectory of ${x_includes}.
4183 * configure.in: Check for gettimeofday function, for getdate.y.
4185 Change `configure' to a mixture of custom code and autoconf stuff.
4186 autoconf can't derive all the information we need, but we'd really
4187 like to be able to take advantage of some of its tests, and its
4188 file-editing facilities.
4189 * configure.in: Renamed from configure.
4190 Quote the sections of shell script we want copied literally to
4191 the configure script.
4192 (compile): Initialize this to make the autoconf macros' code happy.
4193 Use AC_PROG_CC, AC_CONST, and AC_RETSIGTYPE instead of writing out
4194 code to do their jobs.
4195 Use autoconf to produce Makefile and src/config.h.
4196 Remove the Makefile-style comment that autoconf places at the top
4198 (config_h_opts): Removed - no longer necessary.
4199 * Makefile.in (configname): Renamed to configuration.
4200 (CONFIG_CFLAGS): Renamed to DEFS.
4201 (CC, DEFS, C_SWITCH_SYSTEM, version, configuration): Adjusted to
4202 get values via autoload @cookies@.
4203 (libsrc_libs): Get this from autoconf. We used to do nothing
4205 (${SUBDIR}): Pass DEFS to submakes instead of CONFIG_CFLAGS.
4207 * Makefile.in (src/paths.h, lib-src/Makefile, src/Makefile): Don't
4208 echo the move-if-change command.
4210 1993-04-08 Jim Blandy (jimb@churchy.gnu.ai.mit.edu)
4212 * make-dist: Distribute lib-src/rcs-checkin.
4214 * make-dist: It's oldXMenu/compile.com, not oldXMenu/compile.mms.
4215 Don't try to make links to the RCS or Old subdirectories.
4216 Use the appropriate extension for the compression type in use.
4217 Create the tar file in the shell's initial default directory, not
4219 Erase the whole ${tempparent} tree, not just ${tempdir}.
4221 1993-03-30 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
4223 * Makefile.in (src/paths.h): Don't echo the huge sed command we
4224 use to build paths.h.
4225 (lib-src/Makefile, src/Makefile): Similarly.
4227 * configure: Extend test for working `const' keyword to handle AIX
4230 1993-03-24 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
4232 * make-dist: Distribute lisp/term/ChangeLog.
4234 Arrange for C compilation throughout the tree to get
4235 C_SWITCH_SYSTEM from the configuration files.
4236 * configure: Extract C_SWITCH_SYSTEM from the machine and
4237 system-dependent files, and save it in the top-level Makefile.
4238 * Makefile.in (C_SWITCH_SYSTEM): New flag for configure to edit.
4239 (lib-src/Makefile): Edit C_SWITCH_SYSTEM into lib-src/Makefile.
4241 * make-dist: Include the VMS support files in oldXMenu in the
4244 * configure: Doc fix.
4246 * configure: Fix corrupted config_h_opts.
4248 * configure: Properly report option names in error messages.
4250 * configure: Properly recognize --x-includes and --x-libraries
4253 * configure: Fix syntax errors in code handling XFree386.
4255 1993-03-23 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
4257 * configure: Add special code to detect XFree386, and tell
4260 * configure: Properly handle extracting values of LIBS_MACHINE and
4261 LIBS_SYSTEM that contain spaces.
4263 * configure: Add `--x-includes' and `--x-libraries' options. I
4264 think these are dopey, but no less than three alpha testers, at
4265 large sites, have said they have their X files installed in odd
4266 places. Implement them by setting C_SWITCH_X_SITE and
4267 LD_SWITCH_X_SITE in src/config.h.
4269 1993-03-22 Eric S. Raymond (eric@geech.gnu.ai.mit.edu)
4271 * make-dist: Don't distribute etc/Old files.
4273 * GETTING.GNU.SOFTWARE, PROBLEMS: Registered into RCS with their
4276 1993-03-20 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
4278 * make-dist: Fix typo.
4280 1993-03-19 Eric S. Raymond (eric@geech.gnu.ai.mit.edu)
4282 * make-dist: Corrected typo, fixed it to discard = and TAGS files
4283 in some cases where it should but didn't seen to.
4285 * Makefile.in: Added unlock and relock productions.
4287 1993-03-18 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
4289 * make-dist: Add a --compress option to force make-dist to use
4292 * make-dist: Use gzip, if we can find it.
4294 * configure: Recognize rs6000-ibm-aix32 and rs6000-ibm-aix, and
4295 make rs6000-ibm-aix default to -aix32.
4297 1993-03-17 Eric S. Raymond (eric@geech.gnu.ai.mit.edu)
4299 * Makefile.in: Added `Developer's configuration' section.
4301 1993-03-17 Eric S. Raymond (eric@mole.gnu.ai.mit.edu)
4303 * Makefile.in: Add commented-out variable settings for developer's
4306 1993-03-14 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4308 * make-dist: Distribute `src/bitmaps' too.
4310 1993-03-14 Charles Hannum (mycroft@hal.gnu.ai.mit.edu)
4312 * configure: Recognize rs6000-ibm-aix32 and rs6000-ibm-aix, and
4313 make rs6000-ibm-aix default to -aix32.
4315 1993-03-09 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4317 * configure: Recognize strings like "sysvr0" or "sysvr1" as System V.
4319 * Makefile.in (install.sysv): Add a second `$' in front of
4320 `${dest}', so that the shell will expand it, instead of Make.
4322 * configure: When processing the name of the configure script,
4323 collapse `././' to `./', but leave a single `./' prefix alone.
4325 * configure: Doc fix.
4327 1993-03-04 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4329 * configure: Handle isc3.0 correctly.
4331 1993-02-25 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4333 * make-dist: Don't try to copy the COPYING notice into
4334 external-lisp; we're not distributing that directory any more.
4336 1993-02-24 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4338 * Makefile.in (install, install.aix, install.xenix, install.sysv):
4339 Remove CVS subdirectories from the installed directory trees, as
4340 well as RCS directories.
4342 1993-02-23 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4344 * make-dist: Only copy gmalloc.c if we couldn't link it.
4345 Don't try to copy man/{README,Makefile} unless they actually exist.
4347 * Makefile.in (lisppath): Don't include externallispdir in this.
4348 We're not sure whether we're even going to distribute the
4351 1993-02-17 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4353 * make-dist: Don't distribute the external-lisp directory anymore.
4354 * INSTALL: Remove all references to external-lisp.
4356 * configure: Detect whether the compiler supports `const'
4357 properly, and edit src/config.h accordingly.
4359 * configure: Tweak layout of final report.
4361 * Makefile.in (${SUBDIR}): Pass CONFIG_CFLAGS to the submakes, not
4364 * Makefile.in (locallisppath): Make this default to
4365 ${datadir}/emacs/site-lisp, instead of
4366 ${datadir}/emacs/local-lisp. ${datadir} and ${statedir} are often
4367 the same thing, and local-lisp causes completion conflicts with
4369 (lisppath): Add ${externallispdir} to this.
4370 * INSTALL: Adjust installation directions.
4372 * Makefile.in (externallispdir): New variable, to say where to
4373 install the externally-maintained lisp files.
4374 (COPYDIR, COPYDESTS): Copy the external lisp directory just like
4376 * INSTALL: Describe external-lisp and the new externallispdir
4379 1993-02-14 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4381 * configure (progname): New option `--with-gcc'. Make it clearer
4382 how we are trying to guess whether or not we have GCC.
4383 * INSTALL: Document the `--with-gcc' option, and improve
4384 description of `--with-x' options.
4386 1993-02-06 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4388 * Makefile.in (COPYDIR, COPYDESTS): Remove ${srcdir}/info and
4389 ${infodir} from these variables; we have written out explicit code
4390 to install the info files.
4392 1993-01-25 Jim Blandy (jimb@geech.gnu.ai.mit.edu)
4394 * make-dist: Don't distributed the RCS files in the etc directory.
4396 1993-01-24 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4398 * Makefile.in: Some makes can't handle comments in the middle of
4399 commands; move them to before the whole rule.
4401 1993-01-16 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4403 * README: Mention what Emacs is.
4405 1993-01-14 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4407 * make-dist: Include `./lisp/calc-2.02' in the distribution.
4408 Add `./cpp' and `./man' back into the distribution.
4410 1993-01-13 Richard Stallman (rms@mole.gnu.ai.mit.edu)
4412 * Makefile.in: Define MAKE, and use where appropriate.
4414 1993-01-07 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4416 * make-dist: Remember that the authoritative COPYING notice is
4417 `etc/COPYING', not `../etc/COPYING'.
4419 1992-12-20 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4421 * make-dist: Make sure that the COPYING notices in each directory
4422 are copies, not symlinks.
4424 1992-12-19 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4426 * INSTALL: The build process produces an executable called `emacs'
4427 now. Change references.
4428 * Makefile.in: Adjust `install.mumble' targets to install
4429 `src/emacs', not `src/xemacs'.
4431 * configure: Start with a blank line; this keeps some old CSH's
4432 from thinking it's a CSH script. Most systems will just use
4433 /bin/sh to run it, which is what we're expecting; the only other
4434 shells which might try to interpret it themselves are probably
4437 1992-12-14 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4439 * INSTALL: Improvements suggested by David Mackenzie.
4441 1992-12-12 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4443 * Makefile.in (install, install.sysv, install.xenix, install.aix):
4444 Don't try to copy the info files if there aren't any; the
4445 unexpanded globbing pattern disappoints `install'. Ignore the
4446 return status of that command.
4448 * INSTALL: Updated for new configuration arrangement.
4450 * configure: Don't make the top-level Makefile read-only - people
4451 may want to edit the values of the path variables.
4453 * Makefile.in (install, install.sysv, install.xenix, install.aix):
4454 Install the info files in ${infodir}. Install the executable
4455 under both `emacs' and `emacs-VERSION'.
4457 * Makefile.in: Doc fix.
4459 * Makefile.in (exec_prefix): New variable, as per latest version
4460 of coding standards.
4461 (bindir, libdir): Use it, instead of `prefix'.
4462 (lib-src/Makefile): Edit value of exec_prefix into lib-src/Makefile.
4464 * Makefile.in (mandir): Make the default value for this depend on
4467 * Makefile.in (datadir, statedir, libdir): Make these all default
4469 (lispdir, locallisppath, etcdir, lockdir, archlibdir): Adjusted
4472 * Makefile.in (install, install.sysv, install.xenix, install.aix):
4473 Install the etags and ctags man pages too.
4475 * Makefile.in (distclean): Don't delete backup files; that's the
4477 (extraclean): Like distclean, but deletes backup and autosave files.
4479 1992-12-10 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4481 Make path specification conform to GNU coding standards.
4482 * configure (long_usage): Remove all traces of old arguments from
4483 usage messages, and document the options we do accept in more
4484 detail: -with-x... and --srcdir.
4485 (options, boolean_opts): Deleted; we don't have enough options to
4486 make this worthwhile.
4487 (prefix, bindir, lisppath, datadir, libdir, lockdir): Deleted,
4488 along with the code which supported them; these should be set as
4489 arguments to the top-level make.
4490 (config_h_opts): Since this no longer doubles as a list of option
4491 names, make them upper case; this simplifies the code which uses
4492 them to build the sed command to edit src/config.h. Change the
4493 code which sets them.
4494 (cc, g, O): Don't allow the user to set these using options; they
4495 should be specified using `CC=' and `CFLAGS=' arguments to the
4496 top-level make. Just choose reasonable default values for them,
4497 and edit them into Makefile.in's default CC and CONFIG_CFLAGS
4499 (gnu_malloc, rel_alloc): Don't allow the user to set these using
4500 options; use them whenever the configuration files say they're
4502 Simplify the argument processing loop. Don't accept abbreviations
4503 for option names; these might conflict with other configuration
4504 options in the future.
4505 Add some support for the `--srcdir' option. Check for the sources
4506 in . and .. if `--srcdir' is omitted. If the directories we will
4507 compile in don't exist yet, create them under the current directory.
4508 Note that the rest of the build process doesn't really support
4510 Edit only the top Makefile. That should edit the others. Edit
4511 into the makefile: `version', from lisp/version.el, `configname'
4512 and `srcdir' from the configuration arguments, `CC' and
4513 `CONFIG_CFLAGS' as guessed from the presence or absence of GCC in
4514 the user's path, and LOADLIBES as gleaned from the system
4516 Simplify the report generated; it doesn't need to include any
4517 description of paths now.
4518 Make `config.status' exec configure instead of just calling it, so
4519 there's no harm in overwriting `config.status'.
4520 * Makefile.in (version, configname): New variables, used to choose
4521 the default values for datadir and libdir.
4522 Path variables rearranged into two clearer groups:
4523 - In the first group are the variables specified by the GNU coding
4524 standards (prefix, bindir, datadir, statedir, libdir, mandir,
4525 manext, infodir, and srcdir).
4526 - In the second are the variables actually used for Emacs's paths
4527 (lispdir, locallisppath, lisppath, buildlisppath, etcdir, lockdir,
4528 archlibdir), which depend on the first category.
4529 datadir and libdir default to directories under
4530 ${prefix}/lib/emacs instead of ${prefix}/emacs, by popular
4532 etcdir and lispdir default to subdirectories of datadir.
4533 archlibdir defaults to libdir.
4534 The new installation tree is a bit deeper than it used to be, so
4535 use the new make-path program in lib-src to build them all.
4536 Always build a new src/paths.h.tmp and then move-if-change it to
4537 src/paths.h, to avoid unnecessary rebuilds while responding to the
4539 Remove all mention of arch-lib. Run utility commands from
4540 lib-src, and let the executables be copied into archlibdir when
4542 Add targets for src/Makefile, lib-src/Makefile, and
4543 oldXMenu/Makefile, editing the values of the path variables into
4545 Let lib-src do its own installation.
4546 (datadir): Default to putting data files under
4547 ${prefix}/lib/emacs/${version}, not /usr/local/emacs.
4548 (emacsdir): Variable deleted; it would only be confusing to use.
4549 (lispdir, etcdir): Default to ${datadir}/lisp.
4550 (mkdir): Use make-path for this.
4551 (lockdir): Do this in mkdir.
4552 (Makefile): New target.
4554 * configure (usage_message): Rename to long_usage.
4556 * make-dist: Don't bother creating an arch-lib directory; that's
4557 only for installation now.
4559 1992-11-20 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4561 * configure: Use GCC-style configuration names, using config.sub.
4562 Change the usage and help messages.
4564 * configure: Initialize window_system, not indow_system.
4566 * configure: Report which window system, compiler, and signal
4567 handler return type we decide to use.
4569 * make-dist: Explain what's going on if config.sub and gmalloc.c
4570 can't be linked. Place the code which copies them near the code
4571 which links the rest of the files around them.
4573 1992-11-15 Jim Blandy (jimb@apple-gunkies.gnu.ai.mit.edu)
4575 * make-dist: Don't bother to distribute src/*.com, or
4576 src/vmsbuild; those have all been moved to `../vms'.
4578 1992-11-07 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4580 * make-dist: Don't forget that the way to avoid filenames starting
4581 with `=' is to use the pattern `[a-zA-Z0-9]*.h', not
4582 `[a-zA-Z0-9].h'. Add a new section for dealing with files that we
4583 couldn't make hard links to, since we have two already, and
4584 perhaps more to come.
4586 1992-11-04 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4588 * configure: When editing parameters into lib-src/Makefile, change
4589 the definition of CONFIG_CFLAGS instead of CFLAGS itself; CFLAGS
4590 needs some other flags too.
4592 1992-11-03 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4594 * configure: Remove spurious echo of the configuration name.
4596 * make-dist: Don't distribute files in src/m and src/s whose names
4599 1992-10-27 Richard Stallman (rms@mole.gnu.ai.mit.edu)
4601 * configure: Update GNU_MALLOC and REL_ALLOC in config.h.
4602 Also LISP_FLOAT_TYPE.
4604 1992-10-26 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4606 * make-dist: Copy config.sub, since it's a symbolic link to a file
4607 on another file system.
4609 1992-10-17 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4611 * make-dist: Include lib-src/makedoc.com and emacs.csh in the
4614 * config.sub: New file, to help us recognize configuration names.
4615 * make-dist: Include it in the distribution.
4617 1992-09-14 Richard Stallman (rms@mole.gnu.ai.mit.edu)
4619 * configure: Convert `-' to `_' in specified option names.
4620 Accept options with --. Delete --highpri and --have-x-menu options.
4621 New options --with-x and --with-x10 replace -window-system.
4622 Don't mention options --gnu-malloc, --rel-alloc
4623 or --lisp-float-type in help message.
4625 1992-09-13 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4627 * make-dist: Include the `vms' subdirectory in the distribution.
4629 1992-09-10 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4631 * configure: Remove lines starting with "# DIST: " when building
4632 lib-src/Makefile and src/Makefile. This allows us to mark the
4633 "Makefile.in" files with explanatory comments which won't also get
4634 stuck in the Makefiles.
4636 1992-09-05 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4638 * make-dist: Don't use the '+' operator in the sed regular
4639 expression that extracts the version number from lisp/version.el;
4640 Ultrix sed doesn't seem support the operator. Just double the
4643 1992-09-01 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4645 * Makefile.in: Doc fix.
4647 1992-08-31 Jim Blandy (jimb@totoro.cs.oberlin.edu)
4649 * configure: Rewrite sed command to remove at most one ./ prefix;
4650 Ultrix's sed doesn't allow us to apply the * operator to a \( \)
4653 1992-08-25 Richard Stallman (rms@mole.gnu.ai.mit.edu)
4655 * Makefile.in (src/paths.h): Use sed, not /bin/sed.
4657 1992-08-18 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4659 * make-dist: Go ahead and build a new TAGS file, unless the
4660 --newer option was specified. Don't try to delete a TAGS file
4661 from etc; it's not kept there, and shouldn't be deleted anyway.
4663 1992-08-14 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4665 * make-dist: If the lisp directory contains a default.el, don't
4668 * configure: When searching signal.h for the type of a signal
4669 return handler, make a copy of it, not a symbolic link to it; that
4670 way, it will work on systems that don't have symbolic links.
4672 1992-08-14 Eric S. Raymond (eric@mole.gnu.ai.mit.edu)
4674 * make-dist: taught it about vcdiff and rcs2log, added --newer
4675 option for generating incremental distributions. Stopped it from
4676 generating a TAGS file into the distribution; that sucker is
4677 *big*, and easily enough generated with the toplevel makefile.
4679 1992-08-13 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4681 * configure: When writing config.status, don't prefix progname
4682 with a '.'; it might be absolute.
4684 1992-08-05 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4686 * configure: Choose to use X11 if either /usr/lib/libX11.a or
4687 /usr/include/X11 exist, not only if both exist.
4689 1992-07-27 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4691 * make-dist: Make the new external-lisp directory a duplicate of
4692 the external-lisp directory, not the lisp directory.
4694 1992-07-07 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4696 * Makefile.in (clean, mostlyclean): Don't bother trying to `make
4697 clean' in arch-lib; it doesn't even have a Makefile.
4699 * Makefile.in (clean, mostlyclean): In the test which tries to
4700 distinguish between the build directory, which should be cleaned,
4701 and the installed directory, which shouldn't, cd to `${emacsdir}',
4702 not `${DESTDIR}${LIBDIR}'.
4704 1992-06-30 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4706 * make-dist: Be sure to delete the .c and .h files that YACC and
4707 BISON create from getdate.y.
4709 * external-lisp: New directory; see `external-lisp/README'.
4710 * make-dist: Added support for the external-lisp subdirectory.
4712 * make-dist: Changed message which complains that make-dist wasn't
4713 invoked in the right directory to indicate which files it was
4716 1992-06-29 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4718 * configure: Add comments explaining why we can't translate
4719 character ranges or control characters in `tr'.
4721 1992-06-24 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4723 * configure: When generating the configuration message, we used to
4724 build the message from the start so that each line began with "# "
4725 so that it would be a comment in `config.status'. However, this
4726 causes trouble if any of the variables we use in the message
4727 expand to more than one line of text - as gnu_malloc_reason
4728 sometimes does. So instead, we build the message as it should be
4729 printed to the user (i.e. without the "# " prefixes), and stick on
4730 the "# "s when we write it to `config.status'.
4732 * Makefile.in (clean, mostlyclean): Don't neglect to clean out
4733 `lib-src' and `arch-lib'.
4735 * configure: When generating report and `config.status' file, note
4736 that bindir only determines where `make install' and
4737 `build-install' will place the executables; this should make it
4738 clear that the ordinary build process will not try to install
4741 1992-06-10 Jim Blandy (jimb@wookumz.gnu.ai.mit.edu)
4743 * make-dist: Change messages to say that we are 'making links to
4744 X', rather than 'copying X'. And put `' quotes around file names.
4746 * make-dist: Include '.tmp' in the name of the staging directory.
4748 * make-dist: Pass the `-f' option to rm when you're not sure that
4749 the files you're removing actually exist.
4751 * make-dist: When setting up etc/COPYING, always nuke whatever is
4752 there, and then copy it in, to make sure we get a real file.
4754 * make-dist: Don't try to distribute *.defns files any more. The
4755 only such file was for simula.el, which has been superceded by a
4756 version which doesn't have a separate .defns file.
4758 1992-05-28 Ken Raeburn (Raeburn@Cygnus.COM)
4760 * make-dist: Don't distribute configured versions of config.h.in,
4761 paths.h.in, Makefile.in in src.
4763 * configure: Delete .tmp files before creating them; don't bother
4764 trying to make final targets writeable first, since it won't
4765 matter to move-if-change.
4767 1992-05-19 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4769 * Makefile.in (mkdir, lockdir): Don't put dashes in front of the
4770 mkdir and chmod in the center of all the conditionals. GNU Make
4771 will strip these out, but other makes won't.
4773 1992-05-18 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4775 * make-dist: Include move-if-change in list of files to distribute.
4777 1992-05-04 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4779 * configure: Remove any "." elements from the program name.
4781 * configure: Don't record the values of all the possible arguments
4782 in config.status; only record the options that the user specified.
4784 * configure: Use move-if-change to move in the new src/config.h.
4786 1992-04-29 Ken Raeburn (Raeburn@Cygnus.COM)
4788 * move-if-change: New file, copied from gcc release.
4789 * Makefile.in (src/paths.h): Use it, and put the "sed" output into
4790 a temp file, so we don't update paths.h if an error occurs or if
4791 it doesn't need changing.
4793 1992-04-28 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4795 * Makefile.in (src/paths.h): Do not install a value for the
4796 PATH_SUPERLOCK value; that macro doesn't exist anymore.
4797 * build-install.in: Same thing.
4799 1992-04-24 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4801 * make-dist: Check the flag called "make_tar", not "make_dir"; the
4802 latter, being a typo, is always false, resulting in a program
4803 whose default behaviour is to painstakingly build a copy of the
4804 source tree, and then delete it. Rah.
4806 * Makefile.in: Add dist target, and comment for it.
4808 * configure: When scanning <signal.h> for a declaration for
4809 signal, create a symbolic link with a name ending in .c, so the
4810 compiler won't complain that it's only been given .h files.
4812 * configure: Check whether there are any arguments available
4813 before shifting to get the value of a non-boolean parameter.
4815 * make-dist: Doc fix.
4817 1992-04-20 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4819 * configure: Instead of grepping /usr/include/signal.h for a
4820 signal declaration, run /usr/include/signal.h or
4821 /usr/include/sys/signal.h through cpp and grep for the
4824 * configure: Redirect the output of grep to /dev/null instead of
4825 using grep -s - that flag means different things on other systems.
4827 * Makefile.in: Use 'buildlisppath' instead of 'dumplisppath',
4828 since the former is recognizable even if you don't know what
4830 * configure: Accomodate that change.
4832 * configure: Accept options for all of the directories you can
4833 change in the Makefile.
4835 * configure: Accept "-OPTION VALUE" as well as "-OPTION=VALUE".
4837 * INSTALL: Mention that you have to copy all the 'FOO.in' files to
4838 FOO before you can use them.
4840 * build-install.in: Made the "Where To Install Things" section
4841 conform with the similar section from Makefile.in. Copied section
4842 which builds src/paths.h from src/paths.h.in from the Makefile.
4844 1992-04-19 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4846 * configure: Write config.status to pass its command-line
4847 arguments on to configure, so that people can use it to recreate
4848 an old configuration, with minor changes.
4850 1992-04-16 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4852 * configure: Don't rely on option variables being unset if their
4853 values are the empty string. In particular, when producing the
4854 English report, don't assume that highpri will be unset when no
4855 increased priority has been requested; -highpri='' should be the
4856 same as omitting -highpri altogether.
4858 * configure: Fix dumb bug: when running the system and machine
4859 description files through cpp, mark those lines that we want to
4860 evaluate with the string '@configure@', and then only evaluate
4861 them. This way if the files include anything that actually
4862 generates text (type definitions or external declarations, say),
4863 we won't try to eval it.
4865 1992-04-11 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4867 * make-dist: New shell script.
4869 * configure: When creating foo from foo.in, make foo read-only to
4870 remind people to edit the .in file instead.
4872 * INSTALL: Changed references to config.h-dist to config.h.in.
4873 The "BUILDING GNU EMACS BY HAND" section neglected to mention how
4874 to build src/paths.h from src/paths.h.in; added a paragraph to do
4876 * configure, Makefile, build-install: Changed filenames like
4879 1992-04-08 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4881 * Makefile, build-install: Renamed to Makefile.in and
4882 build-install.in; the configure script will edit these to produce
4883 the usable Makefile and build-install.
4884 * configure: Changed to produce ./Makefile, ./build-install,
4885 lib-src/Makefile, and src/Makefile from their *.in counterparts,
4886 instead of editing them in place.
4888 1992-04-07 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4890 * Makefile: Re-arranged so that the undumped Emacs will search
4891 ../lisp *after* the site's local elisp files.
4892 (locallisppath, dumplisppath): New variables.
4893 (lisppath): This variable's default value is now chosen based on
4894 $(locallisppath) and $(lispdir); while it used to be the
4895 customization point for adding site-local elisp directories to
4896 load-path, that job is now handled mostly by locallisppath.
4897 (src/paths.h): Edit the value of a new macro, PATH_DUMPLOADSEARCH.
4898 Check the values being assigned to the *LOADSEARCH macros for null
4899 path elements (like '::' in 'foo::bar').
4901 * configure: When checking if the machine- and system-dependent
4902 files define a particular macro or not, actually run them through
4903 CPP and test the macros with #ifs, instead of just grepping for
4904 the macros' names. In particular, check for SYSTEM_MALLOC in this
4907 1992-04-03 Richard Stallman (rms@mole.gnu.ai.mit.edu)
4909 * Makefile (install): Don't use -s in install. (Keep the symbols.)
4911 1992-04-02 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4913 * configure: Make the config.status file an executable shell
4914 script which will recreate the same configuration. Include the
4915 verbal description of the current configuration as a comment in
4919 * Makefile: brought the Makefile up to the GNU coding
4920 standards, as described in standards.text:
4921 (TAGS): New name for the target which rebuilds the tags table.
4922 (check): New target; doesn't do anything yet.
4923 (mostlyclean): New target, synonymous with clean.
4924 (realclean): New target. Currently, this just calls the
4925 subdirectories's makefiles and then deletes config.status.
4926 (INSTALL, INSTALLFLAGS, INSTALL_PROGRAM, INSTALL_DATA): New
4928 Installation directory variables changed to conform.
4929 (install, install.sysv, install.xenix, install.aix): Changed the
4930 code which copies the directories into their installed location to
4931 allow the installed locations to be in several different
4932 directories; the old version assumed that they would all be in
4934 (mkdir, lockdir): Allow the installed locations to be in several
4935 different directories.
4938 * build-install: Use the same variable names as the Makefile.
4939 Allow the installed locations to be in several different
4942 1992-03-31 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4944 * Makefile (src/paths.h): Instead of using a single sed command to
4945 edit both the PATH_LOCK and PATH_SUPERLOCK macros, edit the two
4946 separately, and don't forget to append "/!!!SuperLock!!!" to the
4947 value of the PATH_SUPERLOCK macro.
4949 * config.emacs: Renamed to configure, for consistency with other
4950 GNU products. Internal references changed.
4951 INSTALL, Makefile: References changed.
4953 * lock: New directory, which should always be empty. If this
4954 directory doesn't exist, Emacs won't complain; it just won't lock.
4955 Having this here means that people can just unpack Emacs, build
4956 it, and have locking work.
4958 * share-lib: Re-renamed to etc, for the sake of tradition.
4959 * config.emacs: Changed default value for datadir to ../etc.
4960 * INSTALL, README: Adjusted.
4962 1992-03-18 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4964 * config.emacs: Guess the value for LOADLIBES in lib-src/Makefile
4965 by running CPP on the appropriate s/*.h and m/*.h files.
4967 1992-03-16 Jim Blandy (jimb@pogo.cs.oberlin.edu)
4969 * config.emacs: Make sure to set the "exit on error" flag once
4970 we've removed config.status; errors should abort the configuration.
4972 1992-02-15 Jim Blandy (jimb at pogo.cs.oberlin.edu)
4974 * config.emacs: Added -distribute option, so that the Makefile
4975 paths are in their proper form. I don't know why this matters.
4977 1992-02-14 Jim Blandy (jimb at pogo.cs.oberlin.edu)
4979 * local-lisp: New directory, empty in the distribution, for people
4980 to put local elisp code in.
4981 * config.emacs: Include it in the default load path.
4982 * README: Document it.
4984 1992-01-30 Jim Blandy (jimb at pogo.cs.oberlin.edu)
4986 * config.emacs: Guess the type of signal handling functions based
4987 on the contents of /usr/include/signal.h.
4989 * config.emacs: Print out progress report messages.
4991 * Makefile (src/paths.h): Don't generically replace
4992 /usr/local/lib/emacs with LIBROOT. This can hide bugs in the
4993 editing of the other entries, and each entry should be dealt with
4996 * build-install: Converted from C-shell to Bourne shell.
4997 * config.emacs: Edit build-install properly.
4999 * config.emacs: Doc fix.
5001 1992-01-27 Richard Stallman (rms@mole.gnu.ai.mit.edu)
5003 * Makefile (install): Remove `B' from tar xf command.
5005 1992-01-13 Jim Blandy (jimb at pogo.cs.oberlin.edu)
5007 * config.emacs: Removed support for the `maintain-environment'
5008 option; the only important difference between this and its absence
5010 * INSTALL: Removed mention of `maintain-environment'.
5012 * config.emacs: Fix arguments to sed when processing boolean
5015 1991-12-05 Jim Blandy (jimb at pogo.gnu.ai.mit.edu)
5017 * config.emacs: New file, to help automate the installation
5020 * Makefile: Lots of changes to support the separation of etc into
5021 architecture-dependent and -independent files:
5022 (EMACSROOT): New variable, giving the directory under which all of
5023 Emacs's libraries should be installed. Changed rest of file to
5025 (LIBDIR): Now denotes only architecture-dependent dir - relevant cha
5026 (DATADIR): New variable, denoting architecture-independent dir.
5027 (LOCKDIR): New variable, for completeness.
5028 (SUBDIR): No more etc, new lib-src.
5029 (COPYDIR): No more etc, new arch-lib and share-lib.
5030 (src/paths.h): Set PATH_DATA and the LOCK macros too.
5031 (src): Now depends on lib-src, not etc.
5032 * build-install: Changes parallel to the above.
5033 * README: Describe the new arrangement.
5035 * vms: New subdirectory for all the VMS stuff.
5037 1991-12-03 Jim Blandy (jimb at pogo.gnu.ai.mit.edu)
5039 * Makefile (LISPPATH): New variable.
5040 (src/paths.h): Define PATH_LOADSEARCH according to LISPPATH.
5042 1990-09-28 Richard Stallman (rms at mole.ai.mit.edu)
5044 * Makefile (install, install.sysv, install.xenix):
5045 Install wakeup instead of loadst. No need for setuid or setgid.
5047 1990-08-07 Richard Stallman (rms at sugar-bombs.ai.mit.edu)
5049 * Makefile (clean): Clean etc if that's not the installation dir.
5051 1990-04-26 Richard Stallman (rms at sugar-bombs.ai.mit.edu)
5053 * Makefile (paths.h): Make sed alter each name in the path.
5055 1988-08-30 Richard Stallman (rms at sugar-bombs.ai.mit.edu)
5057 * Makefile (install.sysv): Use cpio, not tar.
5059 1988-08-03 Richard Stallman (rms at sugar-bombs.ai.mit.edu)
5061 * Makefile (lockdir): Rename `lock' target.
5062 Depend on it from install*, not from `all'.
5064 1988-05-16 Richard Stallman (rms at frosted-flakes.ai.mit.edu)
5066 * Makefile: Changed LIBDIR and BINDIR back to /usr/local/{emacs,bin}
5067 to match build-install and paths.h.
5070 ;; coding: iso-2022-7bit-unix
5073 Copyright (C) 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2001, 2002
5074 Free Software Foundation, Inc.
5075 Copying and distribution of this file, with or without modification,
5076 are permitted provided the copyright notice and this notice are preserved.