merge from trunk
[emacs.git] / Makefile.in
bloba29fd353346850af2c2b4f1d8ca63cc9d7514c26
1 ### @configure_input@
3 # Copyright (C) 1992-2013 Free Software Foundation, Inc.
5 # This file is part of GNU Emacs.
7 # GNU Emacs is free software: you can redistribute it and/or modify
8 # it under the terms of the GNU General Public License as published by
9 # the Free Software Foundation, either version 3 of the License, or
10 # (at your option) any later version.
12 # GNU Emacs is distributed in the hope that it will be useful,
13 # but WITHOUT ANY WARRANTY; without even the implied warranty of
14 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 # GNU General Public License for more details.
17 # You should have received a copy of the GNU General Public License
18 # along with GNU Emacs. If not, see <http://www.gnu.org/licenses/>.
20 ### Commentary:
22 # make all to compile and build Emacs.
23 # make install to install it.
24 # make TAGS to update tags tables.
26 # make clean or make mostlyclean
27 # Delete all files from the current directory that are normally
28 # created by building the program. Don't delete the files that
29 # record the configuration. Also preserve files that could be made
30 # by building, but normally aren't because the distribution comes
31 # with them.
33 # Delete `.dvi' files here if they are not part of the distribution.
35 # make distclean
36 # Delete all files from the current directory that are created by
37 # configuring or building the program. If you have unpacked the
38 # source and built the program without creating any other files,
39 # `make distclean' should leave only the files that were in the
40 # distribution.
42 # make maintainer-clean
43 # Delete everything from the current directory that can be
44 # reconstructed with this Makefile. This typically includes
45 # everything deleted by distclean, plus more: .elc files,
46 # C source files produced by Bison, tags tables, info files,
47 # and so on.
49 # make extraclean
50 # Still more severe - delete backup and autosave files, too.
52 # make bootstrap
53 # Removes all the compiled files to force a new bootstrap from a
54 # clean slate, and then build in the normal way.
56 # make docs
57 # Make Emacs documentation files from their sources; requires makeinfo.
59 SHELL = /bin/sh
61 # This may not work with certain non-GNU make's. It only matters when
62 # inheriting a CDPATH not starting with the current directory.
63 CDPATH=
65 # If Make doesn't predefine MAKE, set it here.
66 @SET_MAKE@
68 # Prevent submakes from outputting "Entering directory ..." and
69 # "Leaving directory..." diagnostics that would mess up 'make echo-info'.
70 QUIET_SUBMAKE = MAKELEVEL=0
72 # ==================== Things `configure' Might Edit ====================
74 cache_file = @cache_file@
75 CONFIGURE_FLAGS = --cache-file=$(cache_file)
77 CC=@CC@
78 CFLAGS=@CFLAGS@
79 LDFLAGS=@LDFLAGS@
80 CPPFLAGS=@CPPFLAGS@
81 EXEEXT=@EXEEXT@
83 ### These help us choose version- and architecture-specific directories
84 ### to install files in.
86 ### This should be the number of the Emacs version we're building,
87 ### like `18.59' or `19.0'.
88 version=@version@
90 ### This should be the name of the configuration we're building Emacs
91 ### for, like `mips-dec-ultrix' or `sparc-sun-sunos'.
92 configuration=@configuration@
94 ### The nt/ subdirectory gets built only for MinGW
95 NTDIR=@NTDIR@
97 # ==================== Where To Install Things ====================
99 # Location to install Emacs.app under GNUstep / Mac OS X.
100 # Later values may use these.
101 ns_appbindir=@ns_appbindir@
102 ns_appresdir=@ns_appresdir@
103 # Either yes or no depending on whether this is a relocatable Emacs.app.
104 ns_self_contained=@ns_self_contained@
106 # The default location for installation. Everything is placed in
107 # subdirectories of this directory. The default values for many of
108 # the variables below are expressed in terms of this one, so you may
109 # not need to change them. This defaults to /usr/local.
110 prefix=@prefix@
112 # Like `prefix', but used for architecture-specific files.
113 exec_prefix=@exec_prefix@
115 # Where to install Emacs and other binaries that people will want to
116 # run directly (like etags).
117 bindir=@bindir@
119 # The root of the directory tree for read-only architecture-independent
120 # data files. ${datadir}, ${infodir} and ${mandir} are based on this.
121 datarootdir=@datarootdir@
123 # Where to install architecture-independent data files. ${lispdir}
124 # and ${etcdir} are subdirectories of this.
125 datadir=@datadir@
127 # Where to install and expect the files that Emacs modifies as it
128 # runs. These files are all architecture-independent.
129 # Right now, this is not used.
130 sharedstatedir=@sharedstatedir@
132 # Where to install and expect executable files to be run by Emacs
133 # rather than directly by users (and other architecture-dependent
134 # data, although Emacs does not have any). The executables
135 # are actually installed in ${archlibdir}, which is (normally)
136 # a subdirectory of this.
137 libexecdir=@libexecdir@
139 # Where to install Emacs's man pages.
140 # Note they contain cross-references that expect them to be in section 1.
141 mandir=@mandir@
142 man1dir=$(mandir)/man1
144 # Where to install and expect the info files describing Emacs.
145 infodir=@infodir@
146 # Info files not in the doc/misc directory (we get those via make echo-info).
147 INFO_EXT=@INFO_EXT@
148 INFO_NONMISC=emacs$(INFO_EXT) eintr$(INFO_EXT) elisp$(INFO_EXT)
150 # If no makeinfo was found and configured --without-makeinfo, "no"; else "yes".
151 HAVE_MAKEINFO=@HAVE_MAKEINFO@
153 # Directory for local state files for all programs.
154 localstatedir=@localstatedir@
156 # Where to look for bitmap files.
157 bitmapdir=@bitmapdir@
159 # Where to find the source code. The source code for Emacs's C kernel is
160 # expected to be in ${srcdir}/src, and the source code for Emacs's
161 # utility programs is expected to be in ${srcdir}/lib-src. This is
162 # set by the configure script's `--srcdir' option.
164 # We use $(srcdir) explicitly in dependencies so as not to depend on VPATH.
165 srcdir=@srcdir@
167 # Where the manpage source files are kept.
168 mansrcdir=$(srcdir)/doc/man
170 # Tell make where to find source files; this is needed for the makefiles.
171 VPATH=@srcdir@
173 # Where to find the application default.
174 x_default_search_path=@x_default_search_path@
176 # Where the etc/emacs.desktop file is to be installed.
177 desktopdir=$(datarootdir)/applications
179 # Where the etc/images/icons/hicolor directory is to be installed.
180 icondir=$(datarootdir)/icons
182 # The source directory for the icon files.
183 iconsrcdir=$(srcdir)/etc/images/icons
185 # ==================== Emacs-specific directories ====================
187 # These variables hold the values Emacs will actually use. They are
188 # based on the values of the standard Make variables above.
190 # Where to install the lisp, leim files distributed with
191 # Emacs. This includes the Emacs version, so that the
192 # lisp files for different versions of Emacs will install
193 # themselves in separate directories.
194 lispdir=@lispdir@
195 leimdir=@leimdir@
197 # Directories Emacs should search for standard lisp files.
198 # The default is ${lispdir}:${leimdir}.
199 standardlisppath=@standardlisppath@
201 # Directories Emacs should search for lisp files specific to this
202 # site (i.e. customizations), before consulting ${standardlisppath}.
203 # This should be a colon-separated list of directories.
204 locallisppath=@locallisppath@
206 # Where Emacs will search to find its lisp files. Before
207 # changing this, check to see if your purpose wouldn't
208 # better be served by changing locallisppath. This
209 # should be a colon-separated list of directories.
210 # The default is ${locallisppath}:${standardlisppath}.
211 lisppath=@lisppath@
213 # Where Emacs will search for its lisp files while
214 # building. This is only used during the process of
215 # compiling Emacs, to help Emacs find its lisp files
216 # before they've been installed in their final location.
217 # This should be a colon-separated list of directories.
218 # Normally it points to the lisp/ directory in the sources.
219 buildlisppath=${srcdir}/lisp
221 # Where to install the other architecture-independent
222 # data files distributed with Emacs (like the tutorial,
223 # the cookie recipes and the Zippy database). This path
224 # usually contains the Emacs version number, so the data
225 # files for multiple versions of Emacs may be installed
226 # at once.
227 etcdir=@etcdir@
229 # Where to put executables to be run by Emacs rather than
230 # the user. This path usually includes the Emacs version
231 # and configuration name, so that multiple configurations
232 # for multiple versions of Emacs may be installed at
233 # once.
234 archlibdir=@archlibdir@
236 # Where to put the etc/DOC file.
237 etcdocdir=@etcdocdir@
239 # Where to install Emacs game score files.
240 gamedir=@gamedir@
242 # ==================== Utility Programs for the Build ====================
244 # Allow the user to specify the install program.
245 # Note that if the system does not provide a suitable install,
246 # configure will use build-aux/install-sh. Annoyingly, it does
247 # not use an absolute path. So we must take care to always run
248 # INSTALL-type commands from the directory containing the Makefile.
249 # This explains (I think) the cd thisdir seen in several install rules.
250 INSTALL = @INSTALL@
251 INSTALL_PROGRAM = @INSTALL_PROGRAM@
252 INSTALL_DATA = @INSTALL_DATA@
253 INSTALL_INFO = @INSTALL_INFO@
254 # By default, we uphold the dignity of our programs.
255 INSTALL_STRIP =
256 MKDIR_P = @MKDIR_P@
257 # Create a link to a file in the same directory as the target.
258 LN_S_FILEONLY = @LN_S_FILEONLY@
260 # We use gzip to compress installed .el files.
261 GZIP_PROG = @GZIP_PROG@
262 # If non-nil, gzip the installed Info and man pages.
263 GZIP_INFO = @GZIP_INFO@
265 # ============================= Targets ==============================
267 # Program name transformation.
268 TRANSFORM = @program_transform_name@
270 # What emacs should be called when installed.
271 EMACS_NAME = `echo emacs | sed '$(TRANSFORM)'`
272 EMACS = ${EMACS_NAME}${EXEEXT}
273 EMACSFULL = `echo emacs-${version} | sed '$(TRANSFORM)'`${EXEEXT}
275 # Subdirectories to make recursively.
276 SUBDIR = $(NTDIR) lib lib-src src lisp leim
278 # The subdir makefiles created by config.status.
279 SUBDIR_MAKEFILES_IN = @SUBDIR_MAKEFILES_IN@
280 SUBDIR_MAKEFILES = `echo $(SUBDIR_MAKEFILES_IN:.in=) | sed 's|$(srcdir)/||g'`
282 # Subdirectories to install, and where they'll go. lib-src's and nt's
283 # makefiles know how to install them, so we don't do that here.
284 # Directories that cannot simply be copied, eg info, are treated
285 # separately. quail appears twice because in out-of-tree builds, it
286 # exists twice.
287 COPYDIR = ${srcdir}/etc ${srcdir}/lisp ${srcdir}/leim/ja-dic ${srcdir}/leim/quail leim/quail
288 COPYDESTS = $(DESTDIR)${etcdir} $(DESTDIR)${lispdir} $(DESTDIR)${leimdir}/ja-dic $(DESTDIR)${leimdir}/quail $(DESTDIR)${leimdir}/quail
290 all: ${SUBDIR}
292 .PHONY: all ${SUBDIR} blessmail epaths-force epaths-force-w32 FRC
294 removenullpaths=sed -e 's/^:*//' -e 's/:*$$//g' -e 's/::*/:/g'
296 # Generate epaths.h from epaths.in. This target is invoked by `configure'.
297 # See comments in configure.ac for why it is done this way, as opposed
298 # to just letting configure generate epaths.h from epaths.in in a
299 # similar way to how Makefile is made from Makefile.in.
300 epaths-force: FRC
301 @(standardlisppath=`echo "${standardlisppath}" | ${removenullpaths}` ; \
302 locallisppath=`echo "${locallisppath}" | ${removenullpaths}` ; \
303 buildlisppath=`echo "${buildlisppath}" | ${removenullpaths}` ; \
304 x_default_search_path=`echo ${x_default_search_path}`; \
305 gamedir=`echo ${gamedir}`; \
306 sed < ${srcdir}/src/epaths.in > epaths.h.$$$$ \
307 -e 's;\(#.*PATH_LOADSEARCH\).*$$;\1 "'"$${standardlisppath}"'";' \
308 -e 's;\(#.*PATH_SITELOADSEARCH\).*$$;\1 "'"$${locallisppath}"'";' \
309 -e 's;\(#.*PATH_DUMPLOADSEARCH\).*$$;\1 "'"$${buildlisppath}"'";' \
310 -e 's;\(#.*PATH_EXEC\).*$$;\1 "${archlibdir}";' \
311 -e 's;\(#.*PATH_INFO\).*$$;\1 "${infodir}";' \
312 -e 's;\(#.*PATH_DATA\).*$$;\1 "${etcdir}";' \
313 -e 's;\(#.*PATH_BITMAPS\).*$$;\1 "${bitmapdir}";' \
314 -e 's;\(#.*PATH_X_DEFAULTS\).*$$;\1 "${x_default_search_path}";' \
315 -e 's;\(#.*PATH_GAME\).*$$;\1 "${gamedir}";' \
316 -e 's;\(#.*PATH_DOC\).*$$;\1 "${etcdocdir}";') && \
317 ${srcdir}/build-aux/move-if-change epaths.h.$$$$ src/epaths.h
319 # Convert MSYS-style /x/foo or Windows-style x:\foo file names
320 # into x:/foo that Windows can grok.
321 msys_to_w32=sed -e 's,\\\\,/,g' -e 's,^/\([A-Za-z]\)/,\1:/,'
323 # Transform directory search path and its components. Original can
324 # be MSYS or Windows style. Set path separator to ";", directory
325 # separator to "/" and transform MSYS-style "/c/" to "c:/".
326 # Remove empty path components and escape semicolons.
327 msys_lisppath_to_w32=sed -e 's,\\\\,/,g' \
328 -e 's,\(^\|[:;]\)\([A-Za-z]\):/,\1/\2/,g' \
329 -e 's/:/;/g' -e 's,\(^\|;\)/\([A-Za-z]\)/,\1\2:/,g' \
330 -e 's/;\+/;/g' -e 's/^;//' -e 's/;$$//' -e 's/;/\\\\;/g'
332 # Replace "${prefix}" with '%emacs_dir%' (which expands to install
333 # directory at runtime).
334 msys_prefix_subst=sed -e 's!\(^\|;\)'"$${prefixpattern}"'\([;/]\|$$\)!\1%emacs_dir%\2!g'
336 # Quote Sed special characters (except backslash and newline) with
337 # a double backslash.
338 msys_sed_sh_escape=sed -e 's/[];$$*.^[]/\\\\&/g'
340 # The w32 build needs a slightly different editing, and it uses
341 # nt/epaths.nt as the template.
342 # Use the value of ${locallisppath} supplied by `configure',
343 # to support the --enable-locallisppath argument.
344 epaths-force-w32: FRC
345 @(w32srcdir=`echo "${srcdir}" | ${msys_to_w32}` ; \
346 prefixpattern=`echo '${prefix}' | ${msys_to_w32} | ${msys_sed_sh_escape}` ; \
347 locallisppath=`echo '${locallisppath}' | ${msys_lisppath_to_w32} | ${msys_prefix_subst}` ; \
348 sed < ${srcdir}/nt/epaths.nt > epaths.h.$$$$ \
349 -e 's;\(#.*PATH_SITELOADSEARCH\).*$$;\1 "'"$${locallisppath}"'";' \
350 -e '/^.*#/s/@VER@/${version}/g' \
351 -e '/^.*#/s/@CFG@/${configuration}/g' \
352 -e "/^.*#/s|@SRC@|$${w32srcdir}|g") && \
353 ${srcdir}/build-aux/move-if-change epaths.h.$$$$ src/epaths.h
355 lib-src src: $(NTDIR) lib
357 src: lib-src FRC
359 # We need to build `emacs' in `src' to compile the *.elc files in `lisp'
360 # and `leim'.
361 lisp leim: src
363 # These targets should be "${SUBDIR} without `src'".
364 lib lib-src lisp leim nt: Makefile FRC
365 cd $@ && $(MAKE) all $(MFLAGS) \
366 CC='${CC}' CFLAGS='${CFLAGS}' CPPFLAGS='${CPPFLAGS}' \
367 LDFLAGS='${LDFLAGS}' MAKE='${MAKE}'
369 # Pass to src/Makefile.in an additional BOOTSTRAPEMACS variable which
370 # is either set to bootstrap-emacs (in case bootstrap-emacs has not been
371 # constructed yet) or the empty string (otherwise).
372 # src/Makefile.in uses it to implement conditional dependencies, so that
373 # files that need bootstrap-emacs to be built do not additionally need
374 # to be kept fresher than bootstrap-emacs. Otherwise changing a single
375 # file src/foo.c forces dumping a new bootstrap-emacs, then re-byte-compiling
376 # all preloaded elisp files, and only then dump the actual src/emacs, which
377 # is not wrong, but is overkill in 99.99% of the cases.
378 src: Makefile FRC
379 boot=bootstrap-emacs$(EXEEXT); \
380 if [ ! -x "src/$$boot" ]; then \
381 cd $@; $(MAKE) all $(MFLAGS) \
382 CC='${CC}' CFLAGS='${CFLAGS}' CPPFLAGS='${CPPFLAGS}' \
383 LDFLAGS='${LDFLAGS}' MAKE='${MAKE}' BOOTSTRAPEMACS="$$boot"; \
385 if [ -r .bzr/checkout/dirstate ]; then \
386 vcswitness="`pwd`/.bzr/checkout/dirstate"; \
387 fi; \
388 cd $@; $(MAKE) all $(MFLAGS) \
389 CC='${CC}' CFLAGS='${CFLAGS}' CPPFLAGS='${CPPFLAGS}' \
390 LDFLAGS='${LDFLAGS}' MAKE='${MAKE}' BOOTSTRAPEMACS="" \
391 VCSWITNESS="$$vcswitness"
393 blessmail: Makefile src FRC
394 cd lib-src && $(MAKE) maybe-blessmail $(MFLAGS) \
395 MAKE='${MAKE}' archlibdir='$(archlibdir)'
397 # We used to have one rule per */Makefile.in, but that leads to race
398 # conditions with parallel makes, so let's assume that the time stamp on
399 # ./Makefile is representative of the time stamp on all the other Makefiles.
401 # config.status overrides MAKEFILE_NAME with a bogus name when creating
402 # src/epaths.h, so that 'make epaths-force' does not recursively invoke
403 # config.status and overwrite config.status while executing it (Bug#11214).
405 # 'make bootstrap' overrides MAKEFILE_NAME to a nonexistent file but
406 # then attempts to build that file. This forces 'Makefile', 'lib/Makefile',
407 # etc. to be built without running into similar recursion problems.
408 MAKEFILE_NAME = Makefile
409 $(MAKEFILE_NAME): config.status $(srcdir)/src/config.in \
410 $(srcdir)/Makefile.in $(SUBDIR_MAKEFILES_IN) $(srcdir)/src/lisp.mk
411 MAKE='$(MAKE)' ./config.status
413 # Don't erase these files if make is interrupted while refreshing them.
414 .PRECIOUS: Makefile config.status
416 config.status: ${srcdir}/configure ${srcdir}/lisp/version.el
417 if [ -x ./config.status ]; then \
418 $(CFG) ./config.status --recheck; \
419 else \
420 $(CFG) $(srcdir)/configure $(CONFIGURE_FLAGS); \
423 AUTOCONF_INPUTS = $(srcdir)/configure.ac $(srcdir)/aclocal.m4
425 $(srcdir)/configure: $(AUTOCONF_INPUTS)
426 cd ${srcdir} && autoconf
428 ACLOCAL_INPUTS = $(srcdir)/m4/gnulib-comp.m4
429 $(srcdir)/aclocal.m4: $(ACLOCAL_INPUTS)
430 cd $(srcdir) && aclocal -I m4
432 AUTOMAKE_INPUTS = $(srcdir)/aclocal.m4 $(srcdir)/lib/Makefile.am \
433 $(srcdir)/lib/gnulib.mk
434 $(srcdir)/lib/Makefile.in: $(AUTOMAKE_INPUTS)
435 cd $(srcdir) && automake --gnu -a -c lib/Makefile
437 # Regenerate files that this makefile would have made, if this makefile
438 # had been built by Automake. The name 'am--refresh' is for
439 # compatibility with subsidiary Automake-generated makefiles.
440 am--refresh: $(srcdir)/aclocal.m4 $(srcdir)/configure $(srcdir)/src/config.in
441 .PHONY: am--refresh
443 $(srcdir)/src/config.in: $(srcdir)/src/stamp-h.in
444 @ # Usually, there's no need to rebuild src/config.in just
445 @ # because stamp-h.in has changed (since building stamp-h.in
446 @ # refreshes config.in as well), but if config.in is missing
447 @ # then we really need to do something more.
448 [ -r "$@" ] || ( cd ${srcdir} && autoheader )
449 $(srcdir)/src/stamp-h.in: $(AUTOCONF_INPUTS)
450 cd ${srcdir} && autoheader
451 rm -f $(srcdir)/src/stamp-h.in
452 echo timestamp > $(srcdir)/src/stamp-h.in
454 # ==================== Installation ====================
456 .PHONY: install install-arch-dep install-arch-indep install-etcdoc install-info
457 .PHONY: install-man install-etc install-strip install-$(NTDIR)
458 .PHONY: uninstall uninstall-$(NTDIR)
460 ## If we let lib-src do its own installation, that means we
461 ## don't have to duplicate the list of utilities to install in
462 ## this Makefile as well.
464 install: all install-arch-indep install-etcdoc install-arch-dep install-$(NTDIR) blessmail
465 @true
467 ## Ensure that $subdir contains a subdirs.el file.
468 ## Here and elsewhere, we set the umask so that any created files are
469 ## world-readable.
470 ## TODO it might be good to warn about non-standard permissions of
471 ## pre-existing directories, but that does not seem easy.
472 write_subdir=if [ -f $${subdir}/subdirs.el ]; \
473 then true; \
474 else \
475 umask 022; \
476 ${MKDIR_P} $${subdir}; \
477 (echo "(if (fboundp 'normal-top-level-add-subdirs-to-load-path)"; \
478 echo " (normal-top-level-add-subdirs-to-load-path))") \
479 > $${subdir}/subdirs.el; \
482 ### Install the executables that were compiled specifically for this machine.
483 ### We do install-arch-indep first because the executable needs the
484 ### Lisp files and DOC file to work properly.
485 install-arch-dep: src install-arch-indep install-etcdoc install-$(NTDIR)
486 umask 022; ${MKDIR_P} $(DESTDIR)${bindir}
487 cd lib-src && \
488 $(MAKE) install $(MFLAGS) prefix=${prefix} \
489 exec_prefix=${exec_prefix} bindir=${bindir} \
490 libexecdir=${libexecdir} archlibdir=${archlibdir} \
491 INSTALL_STRIP=${INSTALL_STRIP}
492 if test "${ns_self_contained}" = "no"; then \
493 ${INSTALL_PROGRAM} $(INSTALL_STRIP) src/emacs${EXEEXT} $(DESTDIR)${bindir}/$(EMACSFULL) || exit 1 ; \
494 chmod 1755 $(DESTDIR)${bindir}/$(EMACSFULL) || true; \
495 if test "x${NO_BIN_LINK}" = x; then \
496 rm -f $(DESTDIR)${bindir}/$(EMACS) ; \
497 cd $(DESTDIR)${bindir} && $(LN_S_FILEONLY) $(EMACSFULL) $(EMACS); \
498 fi; \
499 else \
500 subdir=${ns_appresdir}/site-lisp; \
501 ${write_subdir} || exit 1; \
502 rm -rf ${ns_appresdir}/share; \
505 ### Windows-specific install target for installing programs produced
506 ### in nt/, and its Posix do-nothing shadow.
507 install-:
508 install-nt:
509 cd $(NTDIR) && \
510 $(MAKE) install $(MFLAGS) prefix=${prefix} \
511 exec_prefix=${exec_prefix} bindir=${bindir} \
512 libexecdir=${libexecdir} archlibdir=${archlibdir} \
513 INSTALL_STRIP=${INSTALL_STRIP}
515 ## In the share directory, we are deleting:
516 ## applications (with emacs.desktop, also found in etc/)
517 ## emacs (basically empty except for unneeded site-lisp directories)
518 ## icons (duplicates etc/images/icons/hicolor)
520 ## This is install-etc for everything except self-contained-ns builds.
521 ## For them, it is empty.
522 INSTALL_ARCH_INDEP_EXTRA = @INSTALL_ARCH_INDEP_EXTRA@
524 ## http://lists.gnu.org/archive/html/emacs-devel/2007-10/msg01672.html
525 ## Needs to be the user running install, so configure can't set it.
526 set_installuser=for installuser in $${LOGNAME} $${USERNAME} $${USER} \
527 `id -un 2> /dev/null`; do \
528 [ -n "$${installuser}" ] && break ; \
529 done
531 ### Install the files that are machine-independent.
532 ### Most of them come straight from the distribution; the exception is
533 ### the DOC file, which is copied from the build directory.
535 ## We delete each directory in ${COPYDESTS} before we copy into it;
536 ## that way, we can reinstall over directories that have been put in
537 ## place with their files read-only (perhaps because they are checked
538 ## into RCS). In order to make this safe, we make sure that the
539 ## source exists and is distinct from the destination.
541 ## We delete etc/DOC* because there may be irrelevant DOC files from
542 ## other builds in the source directory. This is ok because we just
543 ## deleted the entire installed etc/ directory and recreated it.
544 ## install-etcdoc installs the relevant DOC.
546 ## Note that we install etc/refcards/*.ps if present.
547 ## TODO we should compress these if GZIP_PROG is set.
548 ## It would be simpler to have a separate install rule for etc/refcards
549 ## (maybe move it to doc/refcards?).
551 ## Note that the Makefiles in the etc directory are potentially useful
552 ## in an installed Emacs, so should not be excluded.
554 ## We used to create locallisppath, but if it points to non-standard
555 ## locations, is not really Emacs's job to create these directories,
556 ## so it is no longer done.
558 ## Note that we use tar instead of plain old cp -R/-r because the latter
559 ## is apparently not portable (even in 2012!).
560 ## http://lists.gnu.org/archive/html/emacs-devel/2012-05/msg00278.html
561 ## I have no idea which platforms Emacs supports where cp -R does not
562 ## work correctly, and therefore no idea when tar can be replaced.
563 ## See also these comments from 2004 about cp -r working fine:
564 ## http://lists.gnu.org/archive/html/autoconf-patches/2004-11/msg00005.html
565 install-arch-indep: lisp leim install-info install-man ${INSTALL_ARCH_INDEP_EXTRA}
566 -set ${COPYDESTS} ; \
567 unset CDPATH; \
568 $(set_installuser); \
569 for dir in ${COPYDIR} ; do \
570 [ -d $${dir} ] || exit 1 ; \
571 dest=$$1 ; shift ; \
572 [ -d $${dest} ] && \
573 [ `cd $${dest} && /bin/pwd` = `cd $${dir} && /bin/pwd` ] && \
574 continue ; \
575 if [ "$${dir}" = "leim/quail" ]; then \
576 [ `cd $${dir} && /bin/pwd` = `cd ${srcdir}/leim/quail && /bin/pwd` ] && \
577 continue ; \
578 else \
579 rm -rf $${dest} ; \
580 umask 022; ${MKDIR_P} $${dest} ; \
581 fi ; \
582 echo "Copying $${dir} to $${dest}..." ; \
583 (cd $${dir}; tar -chf - . ) \
584 | (cd $${dest}; umask 022; \
585 tar -xvf - && cat > /dev/null) || exit 1; \
586 if [ "$${dir}" = "${srcdir}/etc" ]; then \
587 rm -f $${dest}/DOC* ; \
588 rm -f $${dest}/refcards/*.aux $${dest}/refcards/*.dvi; \
589 rm -f $${dest}/refcards/*.log; \
590 else true; \
591 fi; \
592 for subdir in `find $${dest} -type d -print` ; do \
593 chmod a+rx $${subdir} ; \
594 rm -f $${subdir}/.gitignore ; \
595 rm -f $${subdir}/.arch-inventory ; \
596 rm -f $${subdir}/.DS_Store ; \
597 rm -f $${subdir}/\#* ; \
598 rm -f $${subdir}/.\#* ; \
599 rm -f $${subdir}/*~ ; \
600 rm -f $${subdir}/*.orig ; \
601 rm -f $${subdir}/ChangeLog* ; \
602 [ "$${dir}" != "${srcdir}/etc" ] && \
603 rm -f $${subdir}/[mM]akefile*[.-]in $${subdir}/[mM]akefile ; \
604 done ; \
605 find $${dest} -exec chown $${installuser} {} ';' ;\
606 done
607 -rm -f $(DESTDIR)${leimdir}/leim-list.el
608 ${INSTALL_DATA} leim/leim-list.el $(DESTDIR)${leimdir}/leim-list.el
609 -rm -f $(DESTDIR)${lispdir}/subdirs.el
610 umask 022; $(srcdir)/build-aux/update-subdirs $(DESTDIR)${lispdir}
611 subdir=$(DESTDIR)${datadir}/emacs/${version}/site-lisp ; \
612 ${write_subdir}
613 subdir=$(DESTDIR)${datadir}/emacs/site-lisp ; \
614 ${write_subdir} || true
615 [ -z "${GZIP_PROG}" ] || \
616 ( echo "Compressing *.el ..." ; \
617 unset CDPATH; \
618 thisdir=`/bin/pwd`; \
619 for dir in $(DESTDIR)${lispdir} $(DESTDIR)${leimdir}; do \
620 cd $${thisdir} ; \
621 cd $${dir} || exit 1 ; \
622 for f in `find . -name "*.elc" -print`; do \
623 ${GZIP_PROG} -9n `echo $$f|sed 's/.elc$$/.el/'` ; \
624 done ; \
625 done )
626 -chmod -R a+r $(DESTDIR)${datadir}/emacs/${version} ${COPYDESTS}
628 ## The above chmods are needed because "umask 022; tar ..." is not
629 ## guaranteed to do the right thing; eg if we are root and tar is
630 ## preserving source permissions.
632 ## Note that install-arch-indep deletes and recreates the entire
633 ## installed etc/ directory, so we need it to run before this does.
634 install-etcdoc: src install-arch-indep
635 -unset CDPATH; \
636 umask 022; ${MKDIR_P} $(DESTDIR)${etcdocdir} ; \
637 if [ `cd ./etc; /bin/pwd` != `cd $(DESTDIR)${etcdocdir}; /bin/pwd` ]; \
638 then \
639 docfile="DOC"; \
640 echo "Copying etc/$${docfile} to $(DESTDIR)${etcdocdir} ..." ; \
641 ${INSTALL_DATA} etc/$${docfile} $(DESTDIR)${etcdocdir}/$${docfile}; \
642 $(set_installuser); \
643 chown $${installuser} $(DESTDIR)${etcdocdir}/$${docfile} || true ; \
644 else true; fi
646 install-info: info
647 umask 022; ${MKDIR_P} $(DESTDIR)${infodir}
648 -unset CDPATH; \
649 thisdir=`/bin/pwd`; \
650 [ `cd ${srcdir}/info && /bin/pwd` = `cd $(DESTDIR)${infodir} && /bin/pwd` ] || \
651 (cd $(DESTDIR)${infodir}; \
652 [ -f dir ] || \
653 (cd $${thisdir}; \
654 ${INSTALL_DATA} ${srcdir}/info/dir $(DESTDIR)${infodir}/dir) ; \
655 info_misc=`cd $${thisdir}/doc/misc && \
656 $(QUIET_SUBMAKE) $(MAKE) -s echo-info \
657 `; \
658 cd ${srcdir}/info ; \
659 for elt in ${INFO_NONMISC} $${info_misc}; do \
660 test "$(HAVE_MAKEINFO)" = "no" && test ! -f $$elt && continue; \
661 for f in `ls $$elt $$elt-[1-9] $$elt-[1-9][0-9] 2>/dev/null`; do \
662 (cd $${thisdir}; \
663 ${INSTALL_DATA} ${srcdir}/info/$$f $(DESTDIR)${infodir}/$$f); \
664 ( [ -n "${GZIP_INFO}" ] && [ -n "${GZIP_PROG}" ] ) || continue ; \
665 rm -f $(DESTDIR)${infodir}/$$f.gz; \
666 ${GZIP_PROG} -9n $(DESTDIR)${infodir}/$$f; \
667 done; \
668 (cd $${thisdir}; \
669 ${INSTALL_INFO} --info-dir=$(DESTDIR)${infodir} $(DESTDIR)${infodir}/$$elt); \
670 done)
672 ## "gzip || true" is because some gzips exit with non-zero status
673 ## if compression would not reduce the file size. Eg, the gzip in
674 ## OpenBSD 4.9 seems to do this (2013/03). In Emacs, this can
675 ## only happen with the tiny ctags.1 manpage. We don't really care if
676 ## ctags.1 is compressed or not. "gzip -f" is another option here,
677 ## but not sure if portable.
678 install-man:
679 umask 022; ${MKDIR_P} $(DESTDIR)${man1dir}
680 thisdir=`/bin/pwd`; \
681 cd ${mansrcdir}; \
682 for page in *.1; do \
683 dest=`echo "$${page}" | sed -e 's/\.1$$//' -e '$(TRANSFORM)'`.1; \
684 (cd $${thisdir}; \
685 ${INSTALL_DATA} ${mansrcdir}/$${page} $(DESTDIR)${man1dir}/$${dest}); \
686 ( [ -n "${GZIP_INFO}" ] && [ -n "${GZIP_PROG}" ] ) || continue ; \
687 rm -f $(DESTDIR)${man1dir}/$${dest}.gz; \
688 ${GZIP_PROG} -9n $(DESTDIR)${man1dir}/$${dest} || true; \
689 done
691 ## Install those items from etc/ that need to end up elsewhere.
693 ## If you prefer, choose "emacs22" at installation time.
694 ## Note: emacs22 does not have all the resolutions.
695 EMACS_ICON=emacs
697 install-etc:
698 umask 022; ${MKDIR_P} $(DESTDIR)${desktopdir}
699 tmp=etc/emacs.tmpdesktop; rm -f $${tmp}; \
700 emacs_name=`echo emacs | sed '$(TRANSFORM)'`; \
701 sed -e "/^Exec=emacs/ s/emacs/$${emacs_name}/" \
702 -e "/^Icon=emacs/ s/emacs/$${emacs_name}/" \
703 ${srcdir}/etc/emacs.desktop > $${tmp}; \
704 ${INSTALL_DATA} $${tmp} $(DESTDIR)${desktopdir}/${EMACS_NAME}.desktop; \
705 rm -f $${tmp}
706 thisdir=`/bin/pwd`; \
707 cd ${iconsrcdir} || exit 1; umask 022 ; \
708 for dir in */*/apps */*/mimetypes; do \
709 [ -d $${dir} ] || continue ; \
710 ( cd $${thisdir}; ${MKDIR_P} $(DESTDIR)${icondir}/$${dir} ) ; \
711 for icon in $${dir}/${EMACS_ICON}[.-]*; do \
712 [ -r $${icon} ] || continue ; \
713 ext=`echo "$${icon}" | sed -e 's|.*\.||'`; \
714 dest=`echo "$${icon}" | sed -e 's|.*/||' -e "s|\.$${ext}$$||" -e 's/$(EMACS_ICON)/emacs/' -e '$(TRANSFORM)'`.$${ext} ; \
715 ( cd $${thisdir}; \
716 ${INSTALL_DATA} ${iconsrcdir}/$${icon} $(DESTDIR)${icondir}/$${dir}/$${dest} ) \
717 || exit 1; \
718 done ; \
719 done
721 ### Build Emacs and install it, stripping binaries while installing them.
722 install-strip:
723 $(MAKE) $(MFLAGS) INSTALL_STRIP=-s install
725 ### Delete all the installed files that the `install' target would
726 ### create (but not the noninstalled files such as `make all' would create).
728 ### Don't delete the lisp and etc directories if they're in the source tree.
729 uninstall: uninstall-$(NTDIR) uninstall-doc
730 cd lib-src && \
731 $(MAKE) $(MFLAGS) uninstall \
732 prefix=${prefix} exec_prefix=${exec_prefix} \
733 bindir=${bindir} libexecdir=${libexecdir} archlibdir=${archlibdir}
735 -unset CDPATH; \
736 for dir in $(DESTDIR)${lispdir} $(DESTDIR)${etcdir} ; do \
737 if [ -d $${dir} ]; then \
738 case `cd $${dir} ; /bin/pwd` in \
739 `cd ${srcdir} ; /bin/pwd`* ) ;; \
740 * ) rm -rf $${dir} ;; \
741 esac ; \
742 case $${dir} in \
743 $(DESTDIR)${datadir}/emacs/${version}/* ) \
744 rm -rf $(DESTDIR)${datadir}/emacs/${version} \
745 ;; \
746 esac ; \
747 fi ; \
748 done
749 -rm -rf $(DESTDIR)${libexecdir}/emacs/${version}
750 thisdir=`/bin/pwd`; \
751 (info_misc=`cd doc/misc && $(QUIET_SUBMAKE) $(MAKE) -s echo-info`; \
752 if cd $(DESTDIR)${infodir}; then \
753 for elt in ${INFO_NONMISC} $${info_misc}; do \
754 (cd $${thisdir}; \
755 $(INSTALL_INFO) --remove --info-dir=$(DESTDIR)${infodir} $(DESTDIR)${infodir}/$$elt); \
756 if [ -n "${GZIP_INFO}" ] && [ -n "${GZIP_PROG}" ]; then \
757 ext=.gz; else ext=; fi; \
758 rm -f $$elt$$ext $$elt-[1-9]$$ext $$elt-[1-9][0-9]$$ext; \
759 done; \
761 (if [ -n "${GZIP_INFO}" ] && [ -n "${GZIP_PROG}" ]; then \
762 ext=.gz; else ext=; fi; \
763 if cd ${mansrcdir}; then \
764 for page in *.1; do \
765 rm -f $(DESTDIR)${man1dir}/`echo "$${page}" | sed -e 's/\.1$$//' -e '$(TRANSFORM)'`.1$$ext; done; \
767 (cd $(DESTDIR)${bindir} && rm -f $(EMACSFULL) $(EMACS) || true)
768 (if cd $(DESTDIR)${icondir}; then \
769 rm -f hicolor/*x*/apps/${EMACS_NAME}.png \
770 hicolor/scalable/apps/${EMACS_NAME}.svg \
771 hicolor/scalable/mimetypes/`echo emacs-document | sed '$(TRANSFORM)'`.svg; \
773 -rm -f $(DESTDIR)${desktopdir}/${EMACS_NAME}.desktop
774 for file in snake-scores tetris-scores; do \
775 file=$(DESTDIR)${gamedir}/$${file}; \
776 [ -s $${file} ] || rm -f $$file; \
777 done
779 ### Windows-specific uninstall target for removing programs produced
780 ### in nt/, and its Posix do-nothing shadow.
781 uninstall-:
782 uninstall-nt:
783 cd $(NTDIR) && \
784 $(MAKE) $(MFLAGS) uninstall \
785 prefix=${prefix} exec_prefix=${exec_prefix} \
786 bindir=${bindir} libexecdir=${libexecdir} archlibdir=${archlibdir}
788 FRC:
790 # ==================== Cleaning up and miscellanea ====================
792 .PHONY: mostlyclean clean distclean bootstrap-clean maintainer-clean extraclean
794 ### `mostlyclean'
795 ### Like `clean', but may refrain from deleting a few files that people
796 ### normally don't want to recompile. For example, the `mostlyclean'
797 ### target for GCC does not delete `libgcc.a', because recompiling it
798 ### is rarely necessary and takes a lot of time.
799 mostlyclean: FRC
800 (cd src; $(MAKE) $(MFLAGS) mostlyclean)
801 (cd oldXMenu; $(MAKE) $(MFLAGS) mostlyclean)
802 (cd lwlib; $(MAKE) $(MFLAGS) mostlyclean)
803 (cd lib; $(MAKE) $(MFLAGS) mostlyclean)
804 (cd lib-src; $(MAKE) $(MFLAGS) mostlyclean)
805 (cd nt; $(MAKE) $(MFLAGS) mostlyclean)
806 -(cd doc/emacs && $(MAKE) $(MFLAGS) mostlyclean)
807 -(cd doc/misc && $(MAKE) $(MFLAGS) mostlyclean)
808 -(cd doc/lispref && $(MAKE) $(MFLAGS) mostlyclean)
809 -(cd doc/lispintro && $(MAKE) $(MFLAGS) mostlyclean)
810 (cd leim; $(MAKE) $(MFLAGS) mostlyclean)
812 ### `clean'
813 ### Delete all files from the current directory that are normally
814 ### created by building the program. Don't delete the files that
815 ### record the configuration. Also preserve files that could be made
816 ### by building, but normally aren't because the distribution comes
817 ### with them.
819 ### Delete `.dvi' files here if they are not part of the distribution.
820 clean: FRC
821 -rm -f etc/emacs.tmpdesktop
822 (cd src; $(MAKE) $(MFLAGS) clean)
823 (cd oldXMenu; $(MAKE) $(MFLAGS) clean)
824 (cd lwlib; $(MAKE) $(MFLAGS) clean)
825 (cd lib; $(MAKE) $(MFLAGS) clean)
826 (cd lib-src; $(MAKE) $(MFLAGS) clean)
827 (cd nt; $(MAKE) $(MFLAGS) clean)
828 -(cd doc/emacs && $(MAKE) $(MFLAGS) clean)
829 -(cd doc/misc && $(MAKE) $(MFLAGS) clean)
830 -(cd doc/lispref && $(MAKE) $(MFLAGS) clean)
831 -(cd doc/lispintro && $(MAKE) $(MFLAGS) clean)
832 (cd leim; $(MAKE) $(MFLAGS) clean)
833 (cd nextstep && $(MAKE) $(MFLAGS) clean)
835 ### `bootclean'
836 ### Delete all files that need to be remade for a clean bootstrap.
837 top_bootclean=\
838 rm -f config.cache config.log
839 ### `distclean'
840 ### Delete all files from the current directory that are created by
841 ### configuring or building the program. If you have unpacked the
842 ### source and built the program without creating any other files,
843 ### `make distclean' should leave only the files that were in the
844 ### distribution.
845 top_distclean=\
846 ${top_bootclean}; \
847 rm -f config.status config.log~ Makefile stamp-h1 ${SUBDIR_MAKEFILES}
848 distclean: FRC
849 (cd src; $(MAKE) $(MFLAGS) distclean)
850 (cd oldXMenu; $(MAKE) $(MFLAGS) distclean)
851 (cd lwlib; $(MAKE) $(MFLAGS) distclean)
852 (cd lib; $(MAKE) $(MFLAGS) distclean)
853 (cd lib-src; $(MAKE) $(MFLAGS) distclean)
854 (cd nt; $(MAKE) $(MFLAGS) distclean)
855 (cd doc/emacs && $(MAKE) $(MFLAGS) distclean)
856 (cd doc/misc && $(MAKE) $(MFLAGS) distclean)
857 (cd doc/lispref && $(MAKE) $(MFLAGS) distclean)
858 (cd doc/lispintro && $(MAKE) $(MFLAGS) distclean)
859 (cd leim; $(MAKE) $(MFLAGS) distclean)
860 (cd lisp; $(MAKE) $(MFLAGS) distclean)
861 (cd nextstep && $(MAKE) $(MFLAGS) distclean)
862 [ ! -d test/automated ] || { \
863 cd test/automated && $(MAKE) $(MFLAGS) distclean; \
865 ${top_distclean}
867 ### `bootstrap-clean'
868 ### Delete everything that can be reconstructed by `make' and that
869 ### needs to be deleted in order to force a bootstrap from a clean state.
870 bootstrap-clean: FRC
871 (cd src; $(MAKE) $(MFLAGS) bootstrap-clean)
872 (cd oldXMenu; $(MAKE) $(MFLAGS) maintainer-clean)
873 (cd lwlib; $(MAKE) $(MFLAGS) maintainer-clean)
874 (cd lib; $(MAKE) $(MFLAGS) maintainer-clean)
875 (cd lib-src; $(MAKE) $(MFLAGS) maintainer-clean)
876 (cd nt; $(MAKE) $(MFLAGS) maintainer-clean)
877 -(cd doc/emacs && $(MAKE) $(MFLAGS) maintainer-clean)
878 -(cd doc/misc && $(MAKE) $(MFLAGS) maintainer-clean)
879 -(cd doc/lispref && $(MAKE) $(MFLAGS) maintainer-clean)
880 -(cd doc/lispintro && $(MAKE) $(MFLAGS) maintainer-clean)
881 (cd leim; $(MAKE) $(MFLAGS) maintainer-clean)
882 (cd lisp; $(MAKE) $(MFLAGS) bootstrap-clean)
883 (cd nextstep && $(MAKE) $(MFLAGS) maintainer-clean)
884 [ ! -d test/automated ] || { \
885 cd test/automated && $(MAKE) $(MFLAGS) bootstrap-clean; \
887 [ ! -f config.log ] || mv -f config.log config.log~
888 ${top_bootclean}
890 ### `maintainer-clean'
891 ### Delete everything from the current directory that can be
892 ### reconstructed with this Makefile. This typically includes
893 ### everything deleted by distclean, plus more: C source files
894 ### produced by Bison, tags tables, info files, and so on.
896 ### One exception, however: `make maintainer-clean' should not delete
897 ### `configure' even if `configure' can be remade using a rule in the
898 ### Makefile. More generally, `make maintainer-clean' should not delete
899 ### anything that needs to exist in order to run `configure' and then
900 ### begin to build the program.
901 top_maintainer_clean=\
902 ${top_distclean}; \
903 rm -fr autom4te.cache
904 maintainer-clean: bootstrap-clean FRC
905 (cd src; $(MAKE) $(MFLAGS) maintainer-clean)
906 (cd lisp; $(MAKE) $(MFLAGS) maintainer-clean)
907 [ ! -d test/automated ] || { \
908 cd test/automated && $(MAKE) $(MFLAGS) maintainer-clean; \
910 ${top_maintainer_clean}
912 ### This doesn't actually appear in the coding standards, but Karl
913 ### says GCC supports it, and that's where the configuration part of
914 ### the coding standards seem to come from. It's like distclean, but
915 ### it deletes backup and autosave files too.
916 extraclean:
917 for i in ${SUBDIR}; do (cd $$i; $(MAKE) $(MFLAGS) extraclean); done
918 ${top_maintainer_clean}
919 -rm -f config-tmp-*
920 -rm -f *~ \#*
922 # The src subdir knows how to do the right thing
923 # even when the build directory and source dir are different.
924 .PHONY: TAGS tags
925 TAGS tags: lib lib-src src
926 cd src; $(MAKE) $(MFLAGS) tags
928 check:
929 @if test ! -d test/automated; then \
930 echo "You do not seem to have the test/ directory."; \
931 echo "Maybe you are using a release tarfile, rather than a repository checkout."; \
932 else \
933 cd test/automated && $(MAKE) $(MFLAGS) check; \
936 dist:
937 cd ${srcdir}; ./make-dist
939 DVIS = lispref-dvi lispintro-dvi emacs-dvi misc-dvi
940 HTMLS = lispref-html lispintro-html emacs-html misc-html
941 INFOS = lispref-info lispintro-info emacs-info misc-info
942 PDFS = lispref-pdf lispintro-pdf emacs-pdf misc-pdf
943 PSS = lispref-ps lispintro-ps emacs-ps misc-ps
945 DOCS = $(DVIS) $(HTMLS) $(INFOS) $(PDFS) $(PSS)
946 $(DOCS):
947 t=$@; IFS=-; set $$t; IFS=; cd doc/$$1 && $(MAKE) $(MFLAGS) $$2
949 .PHONY: $(DOCS) docs pdf ps
950 .PHONY: info dvi dist check html info-real force-info check-info-dir
952 ## TODO add etc/refcards.
953 docs: $(DOCS)
954 dvi: $(DVIS)
955 html: $(HTMLS)
956 info-real: $(INFOS)
957 pdf: $(PDFS)
958 ps: $(PSS)
961 INSTALL_DVI = install-emacs-dvi install-lispref-dvi \
962 install-lispintro-dvi install-misc-dvi
963 INSTALL_HTML = install-emacs-html install-lispref-html \
964 install-lispintro-html install-misc-html
965 INSTALL_PDF = install-emacs-pdf install-lispref-pdf \
966 install-lispintro-pdf install-misc-pdf
967 INSTALL_PS = install-emacs-ps install-lispref-ps \
968 install-lispintro-ps install-misc-ps
969 INSTALL_DOC = $(INSTALL_DVI) $(INSTALL_HTML) $(INSTALL_PDF) $(INSTALL_PS)
971 ## Install non .info forms of the documentation.
972 ## TODO add etc/refcards.
973 $(INSTALL_DOC):
974 t=$@; IFS=-; set $$t; IFS=; cd doc/$$2 && $(MAKE) $(MFLAGS) $$1-$$3
976 .PHONY: $(INSTALL_DOC) install-doc
977 .PHONY: install-dvi install-html install-pdf install-ps
979 install-doc: $(INSTALL_DOC)
980 install-dvi: $(INSTALL_DVI)
981 install-html: $(INSTALL_HTML)
982 install-pdf: $(INSTALL_PDF)
983 install-ps: $(INSTALL_PS)
986 UNINSTALL_DVI = uninstall-emacs-dvi uninstall-lispref-dvi \
987 uninstall-lispintro-dvi uninstall-misc-dvi
988 UNINSTALL_HTML = uninstall-emacs-html uninstall-lispref-html \
989 uninstall-lispintro-html uninstall-misc-html
990 UNINSTALL_PDF = uninstall-emacs-pdf uninstall-lispref-pdf \
991 uninstall-lispintro-pdf uninstall-misc-pdf
992 UNINSTALL_PS = uninstall-emacs-ps uninstall-lispref-ps \
993 uninstall-lispintro-ps uninstall-misc-ps
994 UNINSTALL_DOC = $(UNINSTALL_DVI) $(UNINSTALL_HTML) $(UNINSTALL_PDF) $(UNINSTALL_PS)
996 $(UNINSTALL_DOC):
997 t=$@; IFS=-; set $$t; IFS=; cd doc/$$2 && $(MAKE) $(MFLAGS) $$1-$$3
999 .PHONY: $(UNINSTALL_DOC) uninstall-doc
1000 .PHONY: uninstall-dvi uninstall-html uninstall-pdf uninstall-ps
1002 uninstall-doc: $(UNINSTALL_DOC)
1003 uninstall-dvi: $(UNINSTALL_DVI)
1004 uninstall-html: $(UNINSTALL_HTML)
1005 uninstall-pdf: $(UNINSTALL_PDF)
1006 uninstall-ps: $(UNINSTALL_PS)
1009 force-info:
1010 # Note that man/Makefile knows how to put the info files in $(srcdir),
1011 # so we can do ok running make in the build dir.
1012 # This used to have a clause that exited with an error if MAKEINFO = no.
1013 # But it is inappropriate to do so without checking if makeinfo is
1014 # actually needed - it is not if the info files are up-to-date. (Bug#3982)
1015 # Only the doc/*/Makefiles can decide that, so we let those rules run
1016 # and give a standard error if makeinfo is needed but missing.
1017 # While it would be nice to give a more detailed error message, that
1018 # would require changing every rule in doc/ that builds an info file,
1019 # and it's not worth it. This case is only relevant if you download a
1020 # release, then change the .texi files.
1021 info: force-info
1022 @if test "$(HAVE_MAKEINFO)" = "no"; then \
1023 echo "Configured --without-makeinfo, not building manuals" ; \
1024 else \
1025 $(MAKE) $(MFLAGS) info-real ; \
1028 # The info/dir file must be updated by hand when new manuals are added.
1029 check-info-dir: info
1030 cd info ; \
1031 missing= ; \
1032 for file in *; do \
1033 test -f "$${file}" || continue ; \
1034 case $${file} in \
1035 *-[0-9]*|COPYING|dir) continue ;; \
1036 esac ; \
1037 file=`echo $${file} | sed 's/\.info//'` ; \
1038 grep -q -F ": ($${file})." dir || missing="$${missing} $${file}" ; \
1039 done ; \
1040 if test -n "$${missing}"; then \
1041 echo "Missing info/dir entries: $${missing}" ; \
1042 exit 1 ; \
1043 fi ; \
1044 echo "info/dir is OK"
1046 #### Bootstrapping.
1048 ### This first cleans the lisp subdirectory, removing all compiled
1049 ### Lisp files. Then re-run make to build all the files anew.
1051 .PHONY: bootstrap
1053 # Bootstrapping does the following:
1054 # * Remove files to start from a bootstrap-clean slate.
1055 # * Run autogen.sh, falling back on copy_autogen if autogen.sh fails.
1056 # * Rebuild Makefile, to update the build procedure itself.
1057 # * Do the actual build.
1058 bootstrap: bootstrap-clean FRC
1059 cd $(srcdir) && { ./autogen.sh || autogen/copy_autogen; }
1060 $(MAKE) $(MFLAGS) MAKEFILE_NAME=force-Makefile force-Makefile
1061 $(MAKE) $(MFLAGS) info all
1063 .PHONY: check-declare
1065 check-declare:
1066 @if [ ! -f $(srcdir)/src/emacs ]; then \
1067 echo "You must build Emacs to use this command"; \
1068 exit 1; \
1070 (cd leim; $(MAKE) $(MFLAGS) $@)
1071 (cd lisp; $(MAKE) $(MFLAGS) $@)