Makefile.in

   1 ### @configure_input@
   2
   3 # Copyright (C) 1992-2013 Free Software Foundation, Inc.
   4
   5 # This file is part of GNU Emacs.
   6
   7 # GNU Emacs is free software: you can redistribute it and/or modify
   8 # it under the terms of the GNU General Public License as published by
   9 # the Free Software Foundation, either version 3 of the License, or
  10 # (at your option) any later version.
  11
  12 # GNU Emacs is distributed in the hope that it will be useful,
  13 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  14 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15 # GNU General Public License for more details.
  16
  17 # You should have received a copy of the GNU General Public License
  18 # along with GNU Emacs.  If not, see <http://www.gnu.org/licenses/>.
  19
  20 ### Commentary:
  21
  22 # make all      to compile and build Emacs.
  23 # make install  to install it.
  24 # make TAGS     to update tags tables.
  25 #
  26 # make clean  or  make mostlyclean
  27 #      Delete all files from the current directory that are normally
  28 #      created by building the program.  Don't delete the files that
  29 #      record the configuration.  Also preserve files that could be made
  30 #      by building, but normally aren't because the distribution comes
  31 #      with them.
  32 #
  33 #      Delete `.dvi' files here if they are not part of the distribution.
  34 #
  35 # make distclean
  36 #      Delete all files from the current directory that are created by
  37 #      configuring or building the program.  If you have unpacked the
  38 #      source and built the program without creating any other files,
  39 #      `make distclean' should leave only the files that were in the
  40 #      distribution.
  41 #
  42 # make maintainer-clean
  43 #      Delete everything from the current directory that can be
  44 #      reconstructed with this Makefile.  This typically includes
  45 #      everything deleted by distclean, plus more: .elc files,
  46 #      C source files produced by Bison, tags tables, info files,
  47 #      and so on.
  48 #
  49 # make extraclean
  50 #      Still more severe - delete backup and autosave files, too.
  51 #
  52 # make bootstrap
  53 #      Removes all the compiled files to force a new bootstrap from a
  54 #      clean slate, and then build in the normal way.
  55 #
  56 # make docs
  57 #      Make Emacs documentation files from their sources; requires makeinfo.
  58
  59 SHELL = @SHELL@
  60
  61 # This may not work with certain non-GNU make's.  It only matters when
  62 # inheriting a CDPATH not starting with the current directory.
  63 CDPATH=
  64
  65 # If Make doesn't predefine MAKE, set it here.
  66 @SET_MAKE@
  67
  68 # Prevent submakes from outputting "Entering directory ..." and
  69 # "Leaving directory..." diagnostics that would mess up 'make echo-info'.
  70 QUIET_SUBMAKE = MAKELEVEL=0
  71
  72 # ==================== Things `configure' Might Edit ====================
  73
  74 cache_file = @cache_file@
  75 CONFIGURE_FLAGS = --cache-file=$(cache_file)
  76
  77 CC=@CC@
  78 CFLAGS=@CFLAGS@
  79 LDFLAGS=@LDFLAGS@
  80 CPPFLAGS=@CPPFLAGS@
  81 EXEEXT=@EXEEXT@
  82
  83 ### These help us choose version- and architecture-specific directories
  84 ### to install files in.
  85
  86 ### This should be the number of the Emacs version we're building,
  87 ### like `18.59' or `19.0'.
  88 version=@version@
  89
  90 ### This should be the name of the configuration we're building Emacs
  91 ### for, like `mips-dec-ultrix' or `sparc-sun-sunos'.
  92 configuration=@configuration@
  93
  94 ### The nt/ subdirectory gets built only for MinGW
  95 NTDIR=@NTDIR@
  96
  97 # ==================== Where To Install Things ====================
  98
  99 # Location to install Emacs.app under GNUstep / Mac OS X.
 100 # Later values may use these.
 101 ns_appbindir=@ns_appbindir@
 102 ns_appresdir=@ns_appresdir@
 103 # Either yes or no depending on whether this is a relocatable Emacs.app.
 104 ns_self_contained=@ns_self_contained@
 105
 106 # The default location for installation.  Everything is placed in
 107 # subdirectories of this directory.  The default values for many of
 108 # the variables below are expressed in terms of this one, so you may
 109 # not need to change them.  This defaults to /usr/local.
 110 prefix=@prefix@
 111
 112 # Like `prefix', but used for architecture-specific files.
 113 exec_prefix=@exec_prefix@
 114
 115 # Where to install Emacs and other binaries that people will want to
 116 # run directly (like etags).
 117 bindir=@bindir@
 118
 119 # The root of the directory tree for read-only architecture-independent
 120 # data files.  ${datadir}, ${infodir} and ${mandir} are based on this.
 121 datarootdir=@datarootdir@
 122
 123 # Where to install architecture-independent data files.  ${lispdir}
 124 # and ${etcdir} are subdirectories of this.
 125 datadir=@datadir@
 126
 127 # Where to install and expect the files that Emacs modifies as it
 128 # runs.  These files are all architecture-independent.
 129 # Right now, this is not used.
 130 sharedstatedir=@sharedstatedir@
 131
 132 # Where to install and expect executable files to be run by Emacs
 133 # rather than directly by users (and other architecture-dependent
 134 # data, although Emacs does not have any).  The executables
 135 # are actually installed in ${archlibdir}, which is (normally)
 136 # a subdirectory of this.
 137 libexecdir=@libexecdir@
 138
 139 # Where to install Emacs's man pages.
 140 # Note they contain cross-references that expect them to be in section 1.
 141 mandir=@mandir@
 142 man1dir=$(mandir)/man1
 143
 144 # Where to install and expect the info files describing Emacs.
 145 infodir=@infodir@
 146 # Info files not in the doc/misc directory (we get those via make echo-info).
 147 INFO_EXT=@INFO_EXT@
 148 INFO_NONMISC=emacs$(INFO_EXT) eintr$(INFO_EXT) elisp$(INFO_EXT)
 149
 150 # If no makeinfo was found and configured --without-makeinfo, "no"; else "yes".
 151 HAVE_MAKEINFO=@HAVE_MAKEINFO@
 152
 153 # Directory for local state files for all programs.
 154 localstatedir=@localstatedir@
 155
 156 # Where to look for bitmap files.
 157 bitmapdir=@bitmapdir@
 158
 159 # Where to find the source code.  The source code for Emacs's C kernel is
 160 # expected to be in ${srcdir}/src, and the source code for Emacs's
 161 # utility programs is expected to be in ${srcdir}/lib-src.  This is
 162 # set by the configure script's `--srcdir' option.
 163
 164 # We use $(srcdir) explicitly in dependencies so as not to depend on VPATH.
 165 srcdir=@srcdir@
 166 abs_srcdir=@abs_srcdir@
 167 # MinGW CPPFLAGS may use this.
 168 abs_top_srcdir=@abs_top_srcdir@
 169
 170 # Where the manpage source files are kept.
 171 mansrcdir=$(srcdir)/doc/man
 172
 173 # Tell make where to find source files; this is needed for the makefiles.
 174 VPATH=@srcdir@
 175
 176 # Where to find the application default.
 177 x_default_search_path=@x_default_search_path@
 178
 179 # Where the etc/emacs.desktop file is to be installed.
 180 desktopdir=$(datarootdir)/applications
 181
 182 # Where the etc/images/icons/hicolor directory is to be installed.
 183 icondir=$(datarootdir)/icons
 184
 185 # The source directory for the icon files.
 186 iconsrcdir=$(srcdir)/etc/images/icons
 187
 188 # ==================== Emacs-specific directories ====================
 189
 190 # These variables hold the values Emacs will actually use.  They are
 191 # based on the values of the standard Make variables above.
 192
 193 # Where to install the lisp, leim files distributed with
 194 # Emacs.  This includes the Emacs version, so that the
 195 # lisp files for different versions of Emacs will install
 196 # themselves in separate directories.
 197 lispdir=@lispdir@
 198 leimdir=@leimdir@
 199
 200 # Directories Emacs should search for standard lisp files.
 201 # The default is ${lispdir}:${leimdir}.
 202 standardlisppath=@standardlisppath@
 203
 204 # Directories Emacs should search for lisp files specific to this
 205 # site (i.e. customizations), before consulting ${standardlisppath}.
 206 # This should be a colon-separated list of directories.
 207 locallisppath=@locallisppath@
 208
 209 # Where Emacs will search to find its lisp files.  Before
 210 # changing this, check to see if your purpose wouldn't
 211 # better be served by changing locallisppath.  This
 212 # should be a colon-separated list of directories.
 213 # The default is ${locallisppath}:${standardlisppath}.
 214 lisppath=@lisppath@
 215
 216 # Where Emacs will search for its lisp files while
 217 # building.  This is only used during the process of
 218 # compiling Emacs, to help Emacs find its lisp files
 219 # before they've been installed in their final location.
 220 # This should be a colon-separated list of directories.
 221 # Normally it points to the lisp/ directory in the sources.
 222 buildlisppath=${abs_srcdir}/lisp
 223
 224 # Where to install the other architecture-independent
 225 # data files distributed with Emacs (like the tutorial,
 226 # the cookie recipes and the Zippy database). This path
 227 # usually contains the Emacs version number, so the data
 228 # files for multiple versions of Emacs may be installed
 229 # at once.
 230 etcdir=@etcdir@
 231
 232 # Where to put executables to be run by Emacs rather than
 233 # the user.  This path usually includes the Emacs version
 234 # and configuration name, so that multiple configurations
 235 # for multiple versions of Emacs may be installed at
 236 # once.
 237 archlibdir=@archlibdir@
 238
 239 # Where to put the etc/DOC file.
 240 etcdocdir=@etcdocdir@
 241
 242 # Where to install Emacs game score files.
 243 gamedir=@gamedir@
 244
 245 # ==================== Utility Programs for the Build ====================
 246
 247 # Allow the user to specify the install program.
 248 # Note that if the system does not provide a suitable install,
 249 # configure will use build-aux/install-sh.  Annoyingly, it does
 250 # not use an absolute path.  So we must take care to always run
 251 # INSTALL-type commands from the directory containing the Makefile.
 252 # This explains (I think) the cd thisdir seen in several install rules.
 253 INSTALL = @INSTALL@
 254 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 255 INSTALL_DATA = @INSTALL_DATA@
 256 INSTALL_INFO = @INSTALL_INFO@
 257 # By default, we uphold the dignity of our programs.
 258 INSTALL_STRIP =
 259 MKDIR_P = @MKDIR_P@
 260 # Create a link to a file in the same directory as the target.
 261 LN_S_FILEONLY = @LN_S_FILEONLY@
 262
 263 # We use gzip to compress installed .el files.
 264 GZIP_PROG = @GZIP_PROG@
 265
 266 # ============================= Targets ==============================
 267
 268 # Program name transformation.
 269 TRANSFORM = @program_transform_name@
 270
 271 # What emacs should be called when installed.
 272 EMACS_NAME = `echo emacs | sed '$(TRANSFORM)'`
 273 EMACS = ${EMACS_NAME}${EXEEXT}
 274 EMACSFULL = `echo emacs-${version} | sed '$(TRANSFORM)'`${EXEEXT}
 275
 276 # Subdirectories to make recursively.
 277 SUBDIR = $(NTDIR) lib lib-src src lisp leim
 278
 279 # The subdir makefiles created by config.status.
 280 SUBDIR_MAKEFILES_IN = @SUBDIR_MAKEFILES_IN@
 281 SUBDIR_MAKEFILES = `echo $(SUBDIR_MAKEFILES_IN:.in=) | sed 's|$(srcdir)/||g'`
 282
 283 # Subdirectories to install, and where they'll go.  lib-src's and nt's
 284 # makefiles know how to install them, so we don't do that here.
 285 # Directories that cannot simply be copied, eg info, are treated
 286 # separately.  quail appears twice because in out-of-tree builds, it
 287 # exists twice.
 288 COPYDIR = ${srcdir}/etc ${srcdir}/lisp ${srcdir}/leim/ja-dic ${srcdir}/leim/quail leim/quail
 289 COPYDESTS = "$(DESTDIR)${etcdir}" "$(DESTDIR)${lispdir}" "$(DESTDIR)${leimdir}/ja-dic" "$(DESTDIR)${leimdir}/quail" "$(DESTDIR)${leimdir}/quail"
 290
 291 all: ${SUBDIR}
 292
 293 .PHONY: all ${SUBDIR} blessmail epaths-force epaths-force-w32 FRC
 294
 295 removenullpaths=sed -e 's/^:*//' -e 's/:*$$//g' -e 's/::*/:/g'
 296
 297 # Generate epaths.h from epaths.in.  This target is invoked by `configure'.
 298 # See comments in configure.ac for why it is done this way, as opposed
 299 # to just letting configure generate epaths.h from epaths.in in a
 300 # similar way to how Makefile is made from Makefile.in.
 301 epaths-force: FRC
 302         @(standardlisppath=`echo "${standardlisppath}" | ${removenullpaths}` ; \
 303           locallisppath=`echo "${locallisppath}" | ${removenullpaths}` ; \
 304           buildlisppath=`echo "${buildlisppath}" | ${removenullpaths}` ; \
 305           x_default_search_path=`echo ${x_default_search_path}`; \
 306           gamedir=`echo ${gamedir}`; \
 307           sed < ${srcdir}/src/epaths.in > epaths.h.$$$$         \
 308           -e 's;\(#.*PATH_LOADSEARCH\).*$$;\1 "'"$${standardlisppath}"'";' \
 309           -e 's;\(#.*PATH_SITELOADSEARCH\).*$$;\1 "'"$${locallisppath}"'";' \
 310           -e 's;\(#.*PATH_DUMPLOADSEARCH\).*$$;\1 "'"$${buildlisppath}"'";' \
 311           -e 's;\(#.*PATH_EXEC\).*$$;\1 "${archlibdir}";'               \
 312           -e 's;\(#.*PATH_INFO\).*$$;\1 "${infodir}";'                  \
 313           -e 's;\(#.*PATH_DATA\).*$$;\1 "${etcdir}";'                   \
 314           -e 's;\(#.*PATH_BITMAPS\).*$$;\1 "${bitmapdir}";'             \
 315           -e 's;\(#.*PATH_X_DEFAULTS\).*$$;\1 "${x_default_search_path}";' \
 316           -e 's;\(#.*PATH_GAME\).*$$;\1 "${gamedir}";' \
 317           -e 's;\(#.*PATH_DOC\).*$$;\1 "${etcdocdir}";') &&             \
 318         ${srcdir}/build-aux/move-if-change epaths.h.$$$$ src/epaths.h
 319
 320 # Convert MSYS-style /x/foo or Windows-style x:\foo file names
 321 # into x:/foo that Windows can grok.
 322 msys_to_w32=sed -e 's,\\\\,/,g' -e 's,^/\([A-Za-z]\)/,\1:/,'
 323
 324 # Transform directory search path and its components.  Original can
 325 # be MSYS or Windows style.  Set path separator to ";", directory
 326 # separator to "/" and transform MSYS-style "/c/" to "c:/".
 327 # Remove empty path components and escape semicolons.
 328 msys_lisppath_to_w32=sed -e 's,\\\\,/,g'                        \
 329         -e 's,\(^\|[:;]\)\([A-Za-z]\):/,\1/\2/,g'               \
 330         -e 's/:/;/g' -e 's,\(^\|;\)/\([A-Za-z]\)/,\1\2:/,g'     \
 331         -e 's/;\+/;/g' -e 's/^;//' -e 's/;$$//' -e 's/;/\\\\;/g'
 332
 333 # Replace "${prefix}" with '%emacs_dir%' (which expands to install
 334 # directory at runtime).
 335 msys_prefix_subst=sed -e 's!\(^\|;\)'"$${prefixpattern}"'\([;/]\|$$\)!\1%emacs_dir%\2!g'
 336
 337 # Quote Sed special characters (except backslash and newline) with
 338 # a double backslash.
 339 msys_sed_sh_escape=sed -e 's/[];$$*.^[]/\\\\&/g'
 340
 341 # The w32 build needs a slightly different editing, and it uses
 342 # nt/epaths.nt as the template.
 343 # Use the value of ${locallisppath} supplied by `configure',
 344 # to support the --enable-locallisppath argument.
 345 epaths-force-w32: FRC
 346         @(w32srcdir=`echo "${abs_srcdir}" | ${msys_to_w32}` ;   \
 347           prefixpattern=`echo '${prefix}' | ${msys_to_w32} | ${msys_sed_sh_escape}` ; \
 348           locallisppath=`echo '${locallisppath}' | ${msys_lisppath_to_w32} | ${msys_prefix_subst}` ; \
 349           sed < ${srcdir}/nt/epaths.nt > epaths.h.$$$$          \
 350           -e 's;\(#.*PATH_SITELOADSEARCH\).*$$;\1 "'"$${locallisppath}"'";' \
 351           -e '/^.*#/s/@VER@/${version}/g'                       \
 352           -e '/^.*#/s/@CFG@/${configuration}/g'                 \
 353           -e "/^.*#/s|@SRC@|$${w32srcdir}|g") &&                \
 354         ${srcdir}/build-aux/move-if-change epaths.h.$$$$ src/epaths.h
 355
 356 # If lib/Makefile would build files in '.', then build them before
 357 # building 'lib', to avoid races with parallel makes.
 358 lib: am--refresh
 359
 360 lib-src src: $(NTDIR) lib
 361
 362 src: lib-src
 363
 364 # We need to build `emacs' in `src' to compile the *.elc files in `lisp'
 365 # and `leim'.
 366 lisp leim: src
 367
 368 # These targets should be "${SUBDIR} without `src'".
 369 lib lib-src lisp leim nt: Makefile FRC
 370         cd $@ && $(MAKE) all $(MFLAGS)                         \
 371           CC='${CC}' CFLAGS='${CFLAGS}' CPPFLAGS='${CPPFLAGS}' \
 372           LDFLAGS='${LDFLAGS}' MAKE='${MAKE}'
 373
 374 # Pass to src/Makefile.in an additional BOOTSTRAPEMACS variable which
 375 # is either set to bootstrap-emacs (in case bootstrap-emacs has not been
 376 # constructed yet) or the empty string (otherwise).
 377 # src/Makefile.in uses it to implement conditional dependencies, so that
 378 # files that need bootstrap-emacs to be built do not additionally need
 379 # to be kept fresher than bootstrap-emacs.  Otherwise changing a single
 380 # file src/foo.c forces dumping a new bootstrap-emacs, then re-byte-compiling
 381 # all preloaded elisp files, and only then dump the actual src/emacs, which
 382 # is not wrong, but is overkill in 99.99% of the cases.
 383 src: Makefile FRC
 384         dirstate='.bzr/checkout/dirstate';                              \
 385         vcswitness='$$(srcdir)/../'$$dirstate;                          \
 386         [ -r "$(srcdir)/$$dirstate" ] || vcswitness='';                 \
 387         cd $@ || exit;                                                  \
 388         boot=bootstrap-emacs$(EXEEXT);                                  \
 389         [ ! -x "$$boot" ] || boot='';                                   \
 390         $(MAKE) all $(MFLAGS)                                           \
 391           CC='${CC}' CFLAGS='${CFLAGS}' CPPFLAGS='${CPPFLAGS}'          \
 392           LDFLAGS='${LDFLAGS}' MAKE='${MAKE}' BOOTSTRAPEMACS="$$boot"   \
 393           VCSWITNESS="$$vcswitness"
 394
 395 blessmail: Makefile src FRC
 396         cd lib-src && $(MAKE) maybe-blessmail $(MFLAGS) \
 397           MAKE='${MAKE}' archlibdir='$(archlibdir)'
 398
 399 # We used to have one rule per */Makefile.in, but that leads to race
 400 # conditions with parallel makes, so let's assume that the time stamp on
 401 # ./Makefile is representative of the time stamp on all the other Makefiles.
 402 #
 403 # config.status overrides MAKEFILE_NAME with a bogus name when creating
 404 # src/epaths.h, so that 'make epaths-force' does not recursively invoke
 405 # config.status and overwrite config.status while executing it (Bug#11214).
 406 #
 407 # 'make bootstrap' overrides MAKEFILE_NAME to a nonexistent file but
 408 # then attempts to build that file.  This forces 'Makefile', 'lib/Makefile',
 409 # etc. to be built without running into similar recursion problems.
 410 MAKEFILE_NAME = Makefile
 411 $(MAKEFILE_NAME): config.status $(srcdir)/src/config.in \
 412           $(srcdir)/Makefile.in $(SUBDIR_MAKEFILES_IN) $(srcdir)/src/lisp.mk
 413         MAKE='$(MAKE)' ./config.status
 414
 415 # Don't erase these files if make is interrupted while refreshing them.
 416 .PRECIOUS: Makefile config.status
 417
 418 config.status: ${srcdir}/configure ${srcdir}/lisp/version.el
 419         if [ -x ./config.status ]; then \
 420             $(CFG) ./config.status --recheck;   \
 421         else                            \
 422             $(CFG) $(srcdir)/configure $(CONFIGURE_FLAGS); \
 423         fi
 424
 425 AUTOCONF_INPUTS = $(srcdir)/configure.ac $(srcdir)/aclocal.m4
 426
 427 $(srcdir)/configure: $(AUTOCONF_INPUTS)
 428         cd ${srcdir} && autoconf
 429
 430 ACLOCAL_INPUTS = $(srcdir)/m4/gnulib-comp.m4
 431 $(srcdir)/aclocal.m4: $(ACLOCAL_INPUTS)
 432         cd $(srcdir) && aclocal -I m4
 433
 434 AUTOMAKE_INPUTS = $(srcdir)/aclocal.m4 $(srcdir)/lib/Makefile.am \
 435   $(srcdir)/lib/gnulib.mk
 436 $(srcdir)/lib/Makefile.in: $(AUTOMAKE_INPUTS)
 437         cd $(srcdir) && automake --gnu -a -c lib/Makefile
 438
 439 # Regenerate files that this makefile would have made, if this makefile
 440 # had been built by Automake.  The name 'am--refresh' is for
 441 # compatibility with subsidiary Automake-generated makefiles.
 442 am--refresh: $(srcdir)/aclocal.m4 $(srcdir)/configure $(srcdir)/src/config.in
 443 .PHONY: am--refresh
 444
 445 $(srcdir)/src/config.in: $(srcdir)/src/stamp-h.in
 446         @ # Usually, there's no need to rebuild src/config.in just
 447         @ # because stamp-h.in has changed (since building stamp-h.in
 448         @ # refreshes config.in as well), but if config.in is missing
 449         @ # then we really need to do something more.
 450         [ -r "$@" ] || ( cd ${srcdir} && autoheader )
 451 $(srcdir)/src/stamp-h.in: $(AUTOCONF_INPUTS)
 452         cd ${srcdir} && autoheader
 453         rm -f $(srcdir)/src/stamp-h.in
 454         echo timestamp > $(srcdir)/src/stamp-h.in
 455
 456 # ==================== Installation ====================
 457
 458 .PHONY: install install-arch-dep install-arch-indep install-etcdoc install-info
 459 .PHONY: install-man install-etc install-strip install-$(NTDIR)
 460 .PHONY: uninstall uninstall-$(NTDIR)
 461
 462 ## If we let lib-src do its own installation, that means we
 463 ## don't have to duplicate the list of utilities to install in
 464 ## this Makefile as well.
 465
 466 install: all install-arch-indep install-etcdoc install-arch-dep install-$(NTDIR) blessmail
 467         @true
 468
 469 ## Ensure that $subdir contains a subdirs.el file.
 470 ## Here and elsewhere, we set the umask so that any created files are
 471 ## world-readable.
 472 ## TODO it might be good to warn about non-standard permissions of
 473 ## pre-existing directories, but that does not seem easy.
 474 write_subdir=if [ -f "$${subdir}/subdirs.el" ]; \
 475         then true; \
 476         else \
 477           umask 022; \
 478           ${MKDIR_P} "$${subdir}"; \
 479           (echo "(if (fboundp 'normal-top-level-add-subdirs-to-load-path)"; \
 480            echo "    (normal-top-level-add-subdirs-to-load-path))") \
 481             > "$${subdir}/subdirs.el"; \
 482         fi
 483
 484 ### Install the executables that were compiled specifically for this machine.
 485 ### We do install-arch-indep first because the executable needs the
 486 ### Lisp files and DOC file to work properly.
 487 install-arch-dep: src install-arch-indep install-etcdoc install-$(NTDIR)
 488         umask 022; ${MKDIR_P} "$(DESTDIR)${bindir}"
 489         cd lib-src && \
 490           $(MAKE) install $(MFLAGS) prefix="${prefix}" \
 491             exec_prefix="${exec_prefix}" bindir="${bindir}" \
 492             libexecdir="${libexecdir}" archlibdir="${archlibdir}" \
 493             INSTALL_STRIP=${INSTALL_STRIP}
 494         if test "${ns_self_contained}" = "no"; then \
 495           ${INSTALL_PROGRAM} $(INSTALL_STRIP) src/emacs${EXEEXT} "$(DESTDIR)${bindir}/$(EMACSFULL)" || exit 1 ; \
 496           chmod 1755 "$(DESTDIR)${bindir}/$(EMACSFULL)" || true; \
 497           if test "x${NO_BIN_LINK}" = x; then \
 498             rm -f "$(DESTDIR)${bindir}/$(EMACS)" ; \
 499             cd "$(DESTDIR)${bindir}" && $(LN_S_FILEONLY) $(EMACSFULL) $(EMACS); \
 500           fi; \
 501         else \
 502           subdir=${ns_appresdir}/site-lisp; \
 503           ${write_subdir} || exit 1; \
 504           rm -rf ${ns_appresdir}/share; \
 505         fi
 506
 507 ### Windows-specific install target for installing programs produced
 508 ### in nt/, and its Posix do-nothing shadow.
 509 install-:
 510 install-nt:
 511         cd $(NTDIR) && \
 512           $(MAKE) install $(MFLAGS) prefix="${prefix}" \
 513             exec_prefix="${exec_prefix}" bindir="${bindir}" \
 514             libexecdir="${libexecdir}" archlibdir="${archlibdir}" \
 515             INSTALL_STRIP=${INSTALL_STRIP}
 516
 517 ## In the share directory, we are deleting:
 518 ## applications (with emacs.desktop, also found in etc/)
 519 ## emacs (basically empty except for unneeded site-lisp directories)
 520 ## icons (duplicates etc/images/icons/hicolor)
 521
 522 ## This is install-etc for everything except self-contained-ns builds.
 523 ## For them, it is empty.
 524 INSTALL_ARCH_INDEP_EXTRA = @INSTALL_ARCH_INDEP_EXTRA@
 525
 526 ## http://lists.gnu.org/archive/html/emacs-devel/2007-10/msg01672.html
 527 ## Needs to be the user running install, so configure can't set it.
 528 set_installuser=for installuser in $${LOGNAME} $${USERNAME} $${USER} \
 529           `id -un 2> /dev/null`; do \
 530           [ -n "$${installuser}" ] && break ; \
 531         done
 532
 533 ### Install the files that are machine-independent.
 534 ### Most of them come straight from the distribution; the exception is
 535 ### the DOC file, which is copied from the build directory.
 536
 537 ## We delete each directory in ${COPYDESTS} before we copy into it;
 538 ## that way, we can reinstall over directories that have been put in
 539 ## place with their files read-only (perhaps because they are checked
 540 ## into RCS).  In order to make this safe, we make sure that the
 541 ## source exists and is distinct from the destination.
 542
 543 ## We delete etc/DOC* because there may be irrelevant DOC files from
 544 ## other builds in the source directory.  This is ok because we just
 545 ## deleted the entire installed etc/ directory and recreated it.
 546 ## install-etcdoc installs the relevant DOC.
 547
 548 ## Note that we install etc/refcards/*.ps if present.
 549 ## TODO we should compress these if GZIP_PROG is set.
 550 ## It would be simpler to have a separate install rule for etc/refcards
 551 ## (maybe move it to doc/refcards?).
 552
 553 ## Note that the Makefiles in the etc directory are potentially useful
 554 ## in an installed Emacs, so should not be excluded.
 555
 556 ## We used to create locallisppath, but if it points to non-standard
 557 ## locations, is not really Emacs's job to create these directories,
 558 ## so it is no longer done.
 559
 560 ## Note that we use tar instead of plain old cp -R/-r because the latter
 561 ## is apparently not portable (even in 2012!).
 562 ## http://lists.gnu.org/archive/html/emacs-devel/2012-05/msg00278.html
 563 ## I have no idea which platforms Emacs supports where cp -R does not
 564 ## work correctly, and therefore no idea when tar can be replaced.
 565 ## See also these comments from 2004 about cp -r working fine:
 566 ## http://lists.gnu.org/archive/html/autoconf-patches/2004-11/msg00005.html
 567 install-arch-indep: lisp leim install-info install-man ${INSTALL_ARCH_INDEP_EXTRA}
 568         -set ${COPYDESTS} ; \
 569         unset CDPATH; \
 570         $(set_installuser); \
 571         for dir in ${COPYDIR} ; do \
 572           [ -d $${dir} ] || exit 1 ; \
 573           dest="$$1" ; shift ; \
 574           [ -d "$${dest}" ] && \
 575             [ "`cd \"$${dest}\" && /bin/pwd`" = "`cd $${dir} && /bin/pwd`" ] && \
 576             continue ; \
 577           if [ "$${dir}" = "leim/quail" ]; then \
 578             [ "`cd $${dir} && /bin/pwd`" = "`cd ${srcdir}/leim/quail && /bin/pwd`" ] && \
 579               continue ; \
 580           else \
 581             rm -rf "$${dest}" ; \
 582             umask 022; ${MKDIR_P} "$${dest}" ; \
 583           fi ; \
 584           echo "Copying $${dir} to $${dest}..." ; \
 585           (cd $${dir}; tar -chf - . ) \
 586             | (cd "$${dest}"; umask 022; \
 587                tar -xvf - && cat > /dev/null) || exit 1; \
 588           if [ "$${dir}" = "${srcdir}/etc" ]; then \
 589               rm -f "$${dest}/DOC"* ; \
 590               rm -f "$${dest}/refcards"/*.aux "$${dest}/refcards"/*.dvi; \
 591               rm -f "$${dest}/refcards"/*.log; \
 592           else true; \
 593           fi; \
 594           (cd "$${dest}" || exit 1; \
 595             for subdir in `find . -type d -print` ; do \
 596               chmod a+rx $${subdir} ; \
 597               rm -f $${subdir}/.gitignore ; \
 598               rm -f $${subdir}/.arch-inventory ; \
 599               rm -f $${subdir}/.DS_Store ; \
 600               rm -f $${subdir}/\#* ; \
 601               rm -f $${subdir}/.\#* ; \
 602               rm -f $${subdir}/*~ ; \
 603               rm -f $${subdir}/*.orig ; \
 604               rm -f $${subdir}/ChangeLog* ; \
 605               [ "$${dir}" != "${srcdir}/etc" ] && \
 606                 rm -f $${subdir}/[mM]akefile*[.-]in $${subdir}/[mM]akefile ; \
 607             done ); \
 608           find "$${dest}" -exec chown $${installuser} {} ';' ;\
 609         done
 610         -rm -f "$(DESTDIR)${leimdir}/leim-list.el"
 611         ${INSTALL_DATA} leim/leim-list.el "$(DESTDIR)${leimdir}/leim-list.el"
 612         -rm -f "$(DESTDIR)${lispdir}/subdirs.el"
 613         umask 022; $(srcdir)/build-aux/update-subdirs "$(DESTDIR)${lispdir}"
 614         subdir="$(DESTDIR)${datadir}/emacs/${version}/site-lisp" ; \
 615           ${write_subdir}
 616         subdir="$(DESTDIR)${datadir}/emacs/site-lisp" ; \
 617           ${write_subdir} || true
 618         [ -z "${GZIP_PROG}" ] || \
 619           ( echo "Compressing *.el ..." ; \
 620             unset CDPATH; \
 621             thisdir=`/bin/pwd`; \
 622             for dir in "$(DESTDIR)${lispdir}" "$(DESTDIR)${leimdir}"; do \
 623               cd "$${thisdir}" ; \
 624               cd "$${dir}" || exit 1 ; \
 625               for f in `find . -name "*.elc" -print`; do \
 626                 ${GZIP_PROG} -9n "`echo \"$$f\" | sed 's/.elc$$/.el/'`" ; \
 627               done ; \
 628             done )
 629         -chmod -R a+r "$(DESTDIR)${datadir}/emacs/${version}" ${COPYDESTS}
 630
 631 ## The above chmods are needed because "umask 022; tar ..." is not
 632 ## guaranteed to do the right thing; eg if we are root and tar is
 633 ## preserving source permissions.
 634
 635 ## Note that install-arch-indep deletes and recreates the entire
 636 ## installed etc/ directory, so we need it to run before this does.
 637 install-etcdoc: src install-arch-indep
 638         -unset CDPATH; \
 639         umask 022; ${MKDIR_P} "$(DESTDIR)${etcdocdir}" ; \
 640         if [ "`cd ./etc; /bin/pwd`" != "`cd \"$(DESTDIR)${etcdocdir}\"; /bin/pwd`" ]; \
 641         then \
 642            docfile="DOC"; \
 643            echo "Copying etc/$${docfile} to $(DESTDIR)${etcdocdir} ..." ; \
 644            ${INSTALL_DATA} etc/$${docfile} "$(DESTDIR)${etcdocdir}/$${docfile}"; \
 645            $(set_installuser); \
 646              chown $${installuser} "$(DESTDIR)${etcdocdir}/$${docfile}" || true ; \
 647         else true; fi
 648
 649 install-info: info
 650         umask 022; ${MKDIR_P} "$(DESTDIR)${infodir}"
 651         -unset CDPATH; \
 652         thisdir=`/bin/pwd`; \
 653         if [ "`cd ${srcdir}/info && /bin/pwd`" = "`cd \"$(DESTDIR)${infodir}\" && /bin/pwd`" ]; then \
 654           true; \
 655         else \
 656           (cd "$(DESTDIR)${infodir}"; \
 657            [ -f dir ] || \
 658              (cd "$${thisdir}"; \
 659               ${INSTALL_DATA} ${srcdir}/info/dir "$(DESTDIR)${infodir}/dir") ); \
 660            info_misc=`cd doc/misc && $(QUIET_SUBMAKE) $(MAKE) -s echo-info`; \
 661            cd ${srcdir}/info ; \
 662            for elt in ${INFO_NONMISC} $${info_misc}; do \
 663               test "$(HAVE_MAKEINFO)" = "no" && test ! -f $$elt && continue; \
 664               for f in `ls $$elt $$elt-[1-9] $$elt-[1-9][0-9] 2>/dev/null`; do \
 665                (cd "$${thisdir}"; \
 666                 ${INSTALL_DATA} ${srcdir}/info/$$f "$(DESTDIR)${infodir}/$$f"); \
 667                 [ -n "${GZIP_PROG}" ] || continue ; \
 668                 rm -f "$(DESTDIR)${infodir}/$$f.gz"; \
 669                 ${GZIP_PROG} -9n "$(DESTDIR)${infodir}/$$f"; \
 670               done; \
 671              (cd "$${thisdir}"; \
 672               ${INSTALL_INFO} --info-dir="$(DESTDIR)${infodir}" "$(DESTDIR)${infodir}/$$elt"); \
 673            done; \
 674         fi
 675
 676 ## "gzip || true" is because some gzips exit with non-zero status
 677 ## if compression would not reduce the file size.  Eg, the gzip in
 678 ## OpenBSD 4.9 seems to do this (2013/03).  In Emacs, this can
 679 ## only happen with the tiny ctags.1 manpage.  We don't really care if
 680 ## ctags.1 is compressed or not.  "gzip -f" is another option here,
 681 ## but not sure if portable.
 682 install-man:
 683         umask 022; ${MKDIR_P} "$(DESTDIR)${man1dir}"
 684         thisdir=`/bin/pwd`; \
 685         cd ${mansrcdir}; \
 686         for page in *.1; do \
 687           dest=`echo "$${page}" | sed -e 's/\.1$$//' -e '$(TRANSFORM)'`.1; \
 688           (cd "$${thisdir}"; \
 689            ${INSTALL_DATA} ${mansrcdir}/$${page} "$(DESTDIR)${man1dir}/$${dest}"); \
 690           [ -n "${GZIP_PROG}" ] || continue ; \
 691           rm -f "$(DESTDIR)${man1dir}/$${dest}.gz"; \
 692           ${GZIP_PROG} -9n "$(DESTDIR)${man1dir}/$${dest}" || true; \
 693         done
 694
 695 ## Install those items from etc/ that need to end up elsewhere.
 696
 697 ## If you prefer, choose "emacs22" at installation time.
 698 ## Note: emacs22 does not have all the resolutions.
 699 EMACS_ICON=emacs
 700
 701 install-etc:
 702         umask 022; ${MKDIR_P} "$(DESTDIR)${desktopdir}"
 703         tmp=etc/emacs.tmpdesktop; rm -f $${tmp}; \
 704         emacs_name=`echo emacs | sed '$(TRANSFORM)'`; \
 705         sed -e "/^Exec=emacs/ s/emacs/$${emacs_name}/" \
 706           -e "/^Icon=emacs/ s/emacs/$${emacs_name}/" \
 707           ${srcdir}/etc/emacs.desktop > $${tmp}; \
 708         ${INSTALL_DATA} $${tmp} "$(DESTDIR)${desktopdir}/${EMACS_NAME}.desktop"; \
 709         rm -f $${tmp}
 710         thisdir=`/bin/pwd`; \
 711         cd ${iconsrcdir} || exit 1; umask 022 ; \
 712         for dir in */*/apps */*/mimetypes; do \
 713           [ -d $${dir} ] || continue ; \
 714           ( cd "$${thisdir}"; ${MKDIR_P} "$(DESTDIR)${icondir}/$${dir}" ) ; \
 715           for icon in $${dir}/${EMACS_ICON}[.-]*; do \
 716             [ -r $${icon} ] || continue ; \
 717             ext=`echo "$${icon}" | sed -e 's|.*\.||'`; \
 718             dest=`echo "$${icon}" | sed -e 's|.*/||' -e "s|\.$${ext}$$||" -e 's/$(EMACS_ICON)/emacs/' -e '$(TRANSFORM)'`.$${ext} ; \
 719             ( cd "$${thisdir}"; \
 720               ${INSTALL_DATA} ${iconsrcdir}/$${icon} "$(DESTDIR)${icondir}/$${dir}/$${dest}" ) \
 721             || exit 1; \
 722           done ; \
 723         done
 724
 725 ### Build Emacs and install it, stripping binaries while installing them.
 726 install-strip:
 727         $(MAKE) $(MFLAGS) INSTALL_STRIP=-s install
 728
 729 ### Delete all the installed files that the `install' target would
 730 ### create (but not the noninstalled files such as `make all' would create).
 731 ###
 732 ### Don't delete the lisp and etc directories if they're in the source tree.
 733 uninstall: uninstall-$(NTDIR) uninstall-doc
 734         cd lib-src &&                                   \
 735          $(MAKE) $(MFLAGS) uninstall                    \
 736             prefix="${prefix}" exec_prefix="${exec_prefix}" \
 737             bindir="${bindir}" libexecdir="${libexecdir}" \
 738             archlibdir="${archlibdir}"
 739
 740         -unset CDPATH; \
 741         for dir in "$(DESTDIR)${lispdir}" "$(DESTDIR)${etcdir}" ; do    \
 742           if [ -d "$${dir}" ]; then                     \
 743             case `cd "$${dir}" ; /bin/pwd` in           \
 744               "`cd ${srcdir} ; /bin/pwd`"* ) ;;         \
 745               * ) rm -rf "$${dir}" ;;                   \
 746             esac ;                                      \
 747             case "$${dir}" in                           \
 748               "$(DESTDIR)${datadir}/emacs/${version}"/* )               \
 749                 rm -rf "$(DESTDIR)${datadir}/emacs/${version}"  \
 750               ;;                                        \
 751             esac ;                                      \
 752           fi ;                                          \
 753         done
 754         -rm -rf "$(DESTDIR)${libexecdir}/emacs/${version}"
 755         thisdir=`/bin/pwd`; \
 756         (info_misc=`cd doc/misc && $(QUIET_SUBMAKE) $(MAKE) -s echo-info`; \
 757          if cd "$(DESTDIR)${infodir}"; then \
 758            for elt in ${INFO_NONMISC} $${info_misc}; do \
 759              (cd "$${thisdir}"; \
 760               $(INSTALL_INFO) --remove --info-dir="$(DESTDIR)${infodir}" "$(DESTDIR)${infodir}/$$elt"); \
 761              if [ -n "${GZIP_PROG}" ]; then \
 762                 ext=.gz; else ext=; fi; \
 763              rm -f $$elt$$ext $$elt-[1-9]$$ext $$elt-[1-9][0-9]$$ext; \
 764            done; \
 765          fi)
 766         (if [ -n "${GZIP_PROG}" ]; then \
 767             ext=.gz; else ext=; fi; \
 768          if cd ${mansrcdir}; then \
 769            for page in *.1; do \
 770              rm -f "$(DESTDIR)${man1dir}"/`echo "$${page}" | sed -e 's/\.1$$//' -e '$(TRANSFORM)'`.1$$ext; done; \
 771          fi)
 772         (cd "$(DESTDIR)${bindir}" && rm -f $(EMACSFULL) $(EMACS) || true)
 773         (if cd "$(DESTDIR)${icondir}"; then \
 774            rm -f hicolor/*x*/apps/${EMACS_NAME}.png \
 775              hicolor/scalable/apps/${EMACS_NAME}.svg \
 776              hicolor/scalable/mimetypes/`echo emacs-document | sed '$(TRANSFORM)'`.svg; \
 777         fi)
 778         -rm -f "$(DESTDIR)${desktopdir}/${EMACS_NAME}.desktop"
 779         for file in snake-scores tetris-scores; do \
 780           file="$(DESTDIR)${gamedir}/$${file}"; \
 781           [ -s "$${file}" ] || rm -f "$$file"; \
 782         done
 783
 784 ### Windows-specific uninstall target for removing programs produced
 785 ### in nt/, and its Posix do-nothing shadow.
 786 uninstall-:
 787 uninstall-nt:
 788         cd $(NTDIR) &&                                  \
 789          $(MAKE) $(MFLAGS) uninstall                    \
 790             prefix="${prefix}" exec_prefix="${exec_prefix}" \
 791             bindir="${bindir}" libexecdir="${libexecdir}" \
 792             archlibdir="${archlibdir}"
 793
 794 FRC:
 795
 796 # ==================== Cleaning up and miscellanea ====================
 797
 798 .PHONY: mostlyclean clean distclean bootstrap-clean maintainer-clean extraclean
 799
 800 ### `mostlyclean'
 801 ###      Like `clean', but may refrain from deleting a few files that people
 802 ###      normally don't want to recompile.  For example, the `mostlyclean'
 803 ###      target for GCC does not delete `libgcc.a', because recompiling it
 804 ###      is rarely necessary and takes a lot of time.
 805 mostlyclean: FRC
 806         cd src      && $(MAKE) $(MFLAGS) mostlyclean
 807         cd oldXMenu && $(MAKE) $(MFLAGS) mostlyclean
 808         cd lwlib    && $(MAKE) $(MFLAGS) mostlyclean
 809         cd lib      && $(MAKE) $(MFLAGS) mostlyclean
 810         cd lib-src  && $(MAKE) $(MFLAGS) mostlyclean
 811         cd nt       && $(MAKE) $(MFLAGS) mostlyclean
 812         -cd doc/emacs     && $(MAKE) $(MFLAGS) mostlyclean
 813         -cd doc/misc      && $(MAKE) $(MFLAGS) mostlyclean
 814         -cd doc/lispref   && $(MAKE) $(MFLAGS) mostlyclean
 815         -cd doc/lispintro && $(MAKE) $(MFLAGS) mostlyclean
 816         cd leim     && $(MAKE) $(MFLAGS) mostlyclean
 817
 818 ### `clean'
 819 ###      Delete all files from the current directory that are normally
 820 ###      created by building the program.  Don't delete the files that
 821 ###      record the configuration.  Also preserve files that could be made
 822 ###      by building, but normally aren't because the distribution comes
 823 ###      with them.
 824 ###
 825 ###      Delete `.dvi' files here if they are not part of the distribution.
 826 clean: FRC
 827         -rm -f etc/emacs.tmpdesktop
 828         cd src      && $(MAKE) $(MFLAGS) clean
 829         cd oldXMenu && $(MAKE) $(MFLAGS) clean
 830         cd lwlib    && $(MAKE) $(MFLAGS) clean
 831         cd lib      && $(MAKE) $(MFLAGS) clean
 832         cd lib-src  && $(MAKE) $(MFLAGS) clean
 833         cd nt       && $(MAKE) $(MFLAGS) clean
 834         -cd doc/emacs     && $(MAKE) $(MFLAGS) clean
 835         -cd doc/misc      && $(MAKE) $(MFLAGS) clean
 836         -cd doc/lispref   && $(MAKE) $(MFLAGS) clean
 837         -cd doc/lispintro && $(MAKE) $(MFLAGS) clean
 838         cd leim     && $(MAKE) $(MFLAGS) clean
 839         cd nextstep && $(MAKE) $(MFLAGS) clean
 840
 841 ### `bootclean'
 842 ###      Delete all files that need to be remade for a clean bootstrap.
 843 top_bootclean=\
 844         rm -f config.cache config.log
 845 ### `distclean'
 846 ###      Delete all files from the current directory that are created by
 847 ###      configuring or building the program.  If you have unpacked the
 848 ###      source and built the program without creating any other files,
 849 ###      `make distclean' should leave only the files that were in the
 850 ###      distribution.
 851 top_distclean=\
 852         ${top_bootclean}; \
 853         rm -f config.status config.log~ Makefile stamp-h1 ${SUBDIR_MAKEFILES}
 854 distclean: FRC
 855         cd src      && $(MAKE) $(MFLAGS) distclean
 856         cd oldXMenu && $(MAKE) $(MFLAGS) distclean
 857         cd lwlib    && $(MAKE) $(MFLAGS) distclean
 858         cd lib      && $(MAKE) $(MFLAGS) distclean
 859         cd lib-src  && $(MAKE) $(MFLAGS) distclean
 860         cd nt       && $(MAKE) $(MFLAGS) distclean
 861         cd doc/emacs     && $(MAKE) $(MFLAGS) distclean
 862         cd doc/misc      && $(MAKE) $(MFLAGS) distclean
 863         cd doc/lispref   && $(MAKE) $(MFLAGS) distclean
 864         cd doc/lispintro && $(MAKE) $(MFLAGS) distclean
 865         cd leim     && $(MAKE) $(MFLAGS) distclean
 866         cd lisp     && $(MAKE) $(MFLAGS) distclean
 867         cd nextstep && $(MAKE) $(MFLAGS) distclean
 868         [ ! -d test/automated ] || { \
 869           cd test/automated && $(MAKE) $(MFLAGS) distclean; \
 870         }
 871         ${top_distclean}
 872
 873 ### `bootstrap-clean'
 874 ###      Delete everything that can be reconstructed by `make' and that
 875 ###      needs to be deleted in order to force a bootstrap from a clean state.
 876 bootstrap-clean: FRC
 877         cd src      && $(MAKE) $(MFLAGS) bootstrap-clean
 878         cd oldXMenu && $(MAKE) $(MFLAGS) maintainer-clean
 879         cd lwlib    && $(MAKE) $(MFLAGS) maintainer-clean
 880         cd lib      && $(MAKE) $(MFLAGS) maintainer-clean
 881         cd lib-src  && $(MAKE) $(MFLAGS) maintainer-clean
 882         cd nt       && $(MAKE) $(MFLAGS) maintainer-clean
 883         -cd doc/emacs     && $(MAKE) $(MFLAGS) maintainer-clean
 884         -cd doc/misc      && $(MAKE) $(MFLAGS) maintainer-clean
 885         -cd doc/lispref   && $(MAKE) $(MFLAGS) maintainer-clean
 886         -cd doc/lispintro && $(MAKE) $(MFLAGS) maintainer-clean
 887         cd leim     && $(MAKE) $(MFLAGS) maintainer-clean
 888         cd lisp     && $(MAKE) $(MFLAGS) bootstrap-clean
 889         cd nextstep && $(MAKE) $(MFLAGS) maintainer-clean
 890         [ ! -d test/automated ] || { \
 891           cd test/automated && $(MAKE) $(MFLAGS) bootstrap-clean; \
 892         }
 893         [ ! -f config.log ] || mv -f config.log config.log~
 894         ${top_bootclean}
 895
 896 ### `maintainer-clean'
 897 ###      Delete everything from the current directory that can be
 898 ###      reconstructed with this Makefile.  This typically includes
 899 ###      everything deleted by distclean, plus more: C source files
 900 ###      produced by Bison, tags tables, info files, and so on.
 901 ###
 902 ###      One exception, however: `make maintainer-clean' should not delete
 903 ###      `configure' even if `configure' can be remade using a rule in the
 904 ###      Makefile.  More generally, `make maintainer-clean' should not delete
 905 ###      anything that needs to exist in order to run `configure' and then
 906 ###      begin to build the program.
 907 top_maintainer_clean=\
 908         ${top_distclean}; \
 909         rm -fr autom4te.cache
 910 maintainer-clean: bootstrap-clean FRC
 911         cd src  && $(MAKE) $(MFLAGS) maintainer-clean
 912         cd lisp && $(MAKE) $(MFLAGS) maintainer-clean
 913         [ ! -d test/automated ] || { \
 914           cd test/automated && $(MAKE) $(MFLAGS) maintainer-clean; \
 915         }
 916         ${top_maintainer_clean}
 917
 918 ### This doesn't actually appear in the coding standards, but Karl
 919 ### says GCC supports it, and that's where the configuration part of
 920 ### the coding standards seem to come from.  It's like distclean, but
 921 ### it deletes backup and autosave files too.
 922 extraclean:
 923         for i in ${SUBDIR}; do (cd $$i; $(MAKE) $(MFLAGS) extraclean); done
 924         ${top_maintainer_clean}
 925         -rm -f config-tmp-*
 926         -rm -f *~ \#*
 927
 928 # The src subdir knows how to do the right thing
 929 # even when the build directory and source dir are different.
 930 .PHONY: TAGS tags
 931 TAGS tags: lib lib-src src
 932         cd src; $(MAKE) $(MFLAGS) tags
 933
 934 check:
 935         @if test ! -d test/automated; then \
 936           echo "You do not seem to have the test/ directory."; \
 937           echo "Maybe you are using a release tarfile, rather than a repository checkout."; \
 938         else \
 939           cd test/automated && $(MAKE) $(MFLAGS) check; \
 940         fi
 941
 942 dist:
 943         cd ${srcdir}; ./make-dist
 944
 945 DVIS  = lispref-dvi  lispintro-dvi  emacs-dvi  misc-dvi
 946 HTMLS = lispref-html lispintro-html emacs-html misc-html
 947 INFOS = lispref-info lispintro-info emacs-info misc-info
 948 PDFS  = lispref-pdf  lispintro-pdf  emacs-pdf  misc-pdf
 949 PSS   = lispref-ps   lispintro-ps   emacs-ps   misc-ps
 950
 951 DOCS = $(DVIS) $(HTMLS) $(INFOS) $(PDFS) $(PSS)
 952 $(DOCS):
 953         t=$@; IFS=-; set $$t; IFS=; cd doc/$$1 && $(MAKE) $(MFLAGS) $$2
 954
 955 .PHONY: $(DOCS) docs pdf ps
 956 .PHONY: info dvi dist check html info-real force-info check-info-dir
 957
 958 ## TODO add etc/refcards.
 959 docs: $(DOCS)
 960 dvi: $(DVIS)
 961 html: $(HTMLS)
 962 info-real: $(INFOS)
 963 pdf: $(PDFS)
 964 ps: $(PSS)
 965
 966
 967 INSTALL_DVI = install-emacs-dvi install-lispref-dvi \
 968         install-lispintro-dvi install-misc-dvi
 969 INSTALL_HTML = install-emacs-html install-lispref-html \
 970         install-lispintro-html install-misc-html
 971 INSTALL_PDF = install-emacs-pdf install-lispref-pdf \
 972         install-lispintro-pdf install-misc-pdf
 973 INSTALL_PS = install-emacs-ps install-lispref-ps \
 974         install-lispintro-ps install-misc-ps
 975 INSTALL_DOC = $(INSTALL_DVI) $(INSTALL_HTML) $(INSTALL_PDF) $(INSTALL_PS)
 976
 977 ## Install non .info forms of the documentation.
 978 ## TODO add etc/refcards.
 979 $(INSTALL_DOC):
 980         t=$@; IFS=-; set $$t; IFS=; cd doc/$$2 && $(MAKE) $(MFLAGS) $$1-$$3
 981
 982 .PHONY: $(INSTALL_DOC) install-doc
 983 .PHONY: install-dvi install-html install-pdf install-ps
 984
 985 install-doc: $(INSTALL_DOC)
 986 install-dvi: $(INSTALL_DVI)
 987 install-html: $(INSTALL_HTML)
 988 install-pdf: $(INSTALL_PDF)
 989 install-ps: $(INSTALL_PS)
 990
 991
 992 UNINSTALL_DVI = uninstall-emacs-dvi uninstall-lispref-dvi \
 993         uninstall-lispintro-dvi uninstall-misc-dvi
 994 UNINSTALL_HTML = uninstall-emacs-html uninstall-lispref-html \
 995         uninstall-lispintro-html uninstall-misc-html
 996 UNINSTALL_PDF = uninstall-emacs-pdf uninstall-lispref-pdf \
 997         uninstall-lispintro-pdf uninstall-misc-pdf
 998 UNINSTALL_PS = uninstall-emacs-ps uninstall-lispref-ps \
 999         uninstall-lispintro-ps uninstall-misc-ps
1000 UNINSTALL_DOC = $(UNINSTALL_DVI) $(UNINSTALL_HTML) $(UNINSTALL_PDF) $(UNINSTALL_PS)
1001
1002 $(UNINSTALL_DOC):
1003         t=$@; IFS=-; set $$t; IFS=; cd doc/$$2 && $(MAKE) $(MFLAGS) $$1-$$3
1004
1005 .PHONY: $(UNINSTALL_DOC) uninstall-doc
1006 .PHONY: uninstall-dvi uninstall-html uninstall-pdf uninstall-ps
1007
1008 uninstall-doc: $(UNINSTALL_DOC)
1009 uninstall-dvi: $(UNINSTALL_DVI)
1010 uninstall-html: $(UNINSTALL_HTML)
1011 uninstall-pdf: $(UNINSTALL_PDF)
1012 uninstall-ps: $(UNINSTALL_PS)
1013
1014
1015 force-info:
1016 # Note that man/Makefile knows how to put the info files in $(srcdir),
1017 # so we can do ok running make in the build dir.
1018 # This used to have a clause that exited with an error if MAKEINFO = no.
1019 # But it is inappropriate to do so without checking if makeinfo is
1020 # actually needed - it is not if the info files are up-to-date.  (Bug#3982)
1021 # Only the doc/*/Makefiles can decide that, so we let those rules run
1022 # and give a standard error if makeinfo is needed but missing.
1023 # While it would be nice to give a more detailed error message, that
1024 # would require changing every rule in doc/ that builds an info file,
1025 # and it's not worth it.  This case is only relevant if you download a
1026 # release, then change the .texi files.
1027 info: force-info
1028         @if test "$(HAVE_MAKEINFO)" = "no"; then \
1029           echo "Configured --without-makeinfo, not building manuals" ; \
1030         else \
1031           $(MAKE) $(MFLAGS) info-real ; \
1032         fi
1033
1034 # The info/dir file must be updated by hand when new manuals are added.
1035 # Cannot add an info/dir entry for efaq-w32 since it is not installed
1036 # on all platforms.
1037 check-info-dir: info
1038         cd info ; \
1039         missing= ; \
1040         for file in *; do \
1041           test -f "$${file}" || continue ; \
1042           case $${file} in \
1043             *-[0-9]*|COPYING|dir|efaq-w32*) continue ;; \
1044           esac ; \
1045           file=`echo $${file} | sed 's/\.info//'` ; \
1046           grep -q -F ": ($${file})." dir || missing="$${missing} $${file}" ; \
1047         done ; \
1048         if test -n "$${missing}"; then \
1049           echo "Missing info/dir entries: $${missing}" ; \
1050           exit 1 ; \
1051         fi ; \
1052         echo "info/dir is OK"
1053
1054 #### Bootstrapping.
1055
1056 ### This first cleans the lisp subdirectory, removing all compiled
1057 ### Lisp files.  Then re-run make to build all the files anew.
1058
1059 .PHONY: bootstrap
1060
1061 # Bootstrapping does the following:
1062 #  * Remove files to start from a bootstrap-clean slate.
1063 #  * Run autogen.sh, falling back on copy_autogen if autogen.sh fails.
1064 #  * Rebuild Makefile, to update the build procedure itself.
1065 #  * Do the actual build.
1066 bootstrap: bootstrap-clean FRC
1067         cd $(srcdir) && { ./autogen.sh || autogen/copy_autogen; }
1068         $(MAKE) $(MFLAGS) MAKEFILE_NAME=force-Makefile force-Makefile
1069         $(MAKE) $(MFLAGS) info all
1070
1071 .PHONY: check-declare
1072
1073 check-declare:
1074         @if [ ! -f $(srcdir)/src/emacs ]; then \
1075           echo "You must build Emacs to use this command"; \
1076           exit 1; \
1077         fi
1078         cd leim && $(MAKE) $(MFLAGS) $@
1079         cd lisp && $(MAKE) $(MFLAGS) $@