1 2010-05-26 Glenn Morris <rgm@gnu.org>
3 * sed1v2.inp (@PRE_EDIT_LDFLAGS@, @POST_EDIT_LDFLAGS@): Edit to nothing.
5 * sed1v2.inp (NS_IMPL_GNUSTEP_INC, NS_IMPL_GNUSTEP_TEMACS_LDFLAGS):
8 2010-05-25 Glenn Morris <rgm@gnu.org>
10 * sed1v2.inp (LD_SWITCH_SYSTEM_EXTRA): No longer present.
12 2010-05-21 Glenn Morris <rgm@gnu.org>
14 * sed1v2.inp (@ns_frag@): Edit to nothing.
16 * sed1x.inp (OLDXMENU): Replace any initial value.
17 * sed1v2.inp (OLDXMENU): Edit to "nothing".
19 * sed1v2.inp (CANNOT_DUMP): Edit to no.
21 2010-05-20 Glenn Morris <rgm@gnu.org>
23 * sed1v2.inp (DEPFLAGS, deps_frag): Edit to empty.
24 (MKDEPDIR): Edit to ':'.
26 2010-05-19 Glenn Morris <rgm@gnu.org>
28 * sed2v2.inp (ORDINARY_LINK): Set here rather than in s/msdos.h.
30 * sed1v2.inp (LD): Edit to $(CC).
31 (YMF_PASS_LDFLAGS): Edit to `flags'.
33 2010-05-18 Eli Zaretskii <eliz@gnu.org>
35 * sed1x.inp: Add copyright notice.
37 2010-05-18 Glenn Morris <rgm@gnu.org>
39 * sed1v2.inp (RALLOC_OBJ): Edit to ralloc.o.
41 * sed1v2.inp (GMALLOC_OBJ): Edit to gmalloc.o.
42 (VMLIMIT_OBJ): Edit to vm-limit.o.
44 2010-05-17 Glenn Morris <rgm@gnu.org>
46 * sed1v2.inp (OLDXMENU_DEPS): Edit to empty.
47 * sed1x.inp (OLDXMENU_DEPS): Edit to ${OLDXMENU} ../src/${OLDXMENU}.
49 2010-05-16 Glenn Morris <rgm@gnu.org>
51 * sed1v2.inp (TEMACS_LDFLAGS2): Edit to $(LDFLAGS).
53 * sed1v2.inp (GNUSTEP_SYSTEM_LIBRARIES): Remove.
54 (NS_IMPL_GNUSTEP_TEMACS_LDFLAGS): Edit to empty.
56 2010-05-15 Glenn Morris <rgm@gnu.org>
58 * sed1v2.inp (LIBXMENU): Edit to empty.
59 * sed1x.inp (LIBXMENU): Expect empty initial value.
61 * sed1v2.inp (OLDXMENU): Edit to empty.
62 * sed1x.inp (OLDXMENU): Expect empty initial value.
64 * sed1v2.inp (LIBX_OTHER): Edit to empty.
65 * sed1x.inp (LIBX_OTHER): Expect empty initial value.
67 * sed1v2.inp (FONT_OBJ): Edit to empty for non-X case.
68 * sed1x.inp (FONT_OBJ): Edit to xfont.o for X case.
70 2010-05-15 Eli Zaretskii <eliz@gnu.org>
72 * sed3v2.inp (INSTALLABLES): Edit out extra ${EXEEXT} after
74 (emacsserver, timer, wakeup): Remove edit-out commands.
76 * sed1v2.inp (MSDOS_OBJ): Add w16select.o.
77 (TERMCAP_OBJ): Add termcap.o.
79 2010-05-15 Glenn Morris <rgm@gnu.org>
81 * sed1v2.inp (OLDXMENU_TARGET): Edit to empty.
82 * sed1x.inp (OLDXMENU_TARGET): Edit to really-oldxmenu.
84 * sed1v2.inp (LIBXT_OTHER): Edit to empty.
86 2010-05-14 Glenn Morris <rgm@gnu.org>
88 * sed1v2.inp (ns_appdir, ns_appbindir, ns_appsrc): Edit to empty.
90 * sed1v2.inp (MSDOS_OBJ): Edit to dosfns.o msdos.o.
91 (MSDOS_SUPPORT): Edit to $(MSDOS_SUPPORT_REAL).
92 * sed1x.inp (MSDOS_X_OBJ): Edit to w16select.o termcap.o.
94 * sed2x.inp (HAVE_WINDOW_SYSTEM): Define.
95 * sed1x.inp (TOOLTIP_SUPPORT): Edit to ${lispsource}tooltip.elc.
96 (WINDOW_SUPPORT): Edit to $(BASE_WINDOW_SUPPORT) $(X_WINDOW_SUPPORT).
97 * sed1v2.inp (MOUSE_SUPPORT): Edit to $(REAL_MOUSE_SUPPORT).
98 (TOOLTIP_SUPPORT, WINDOW_SUPPORT): Edit to empty.
100 * sed1v2.inp (FONT_OBJ): Use the plain X version (no XFT, Freetype).
102 * sed1v2.inp (@NS_IMPL_GNUSTEP_INC@): Edit to nil.
104 2010-05-13 Glenn Morris <rgm@gnu.org>
106 * sed1x.inp (OLDXMENU): Edit to ${oldXMenudir}libXMenu11.a.
107 (LIBXMENU): Edit to ${OLDXMENU}.
108 (LIBX_OTHER): Edit to ${LIBXT} ${LIBX_EXTRA}.
110 * sed1v2.inp (C_SWITCH_X_SYSTEM, C_SWITCH_X_SITE, LIB_STANDARD)
111 (FONTCONFIG_CFLAGS, FONTCONFIG_LIBS, FREETYPE_CFLAGS, FREETYPE_LIBS)
112 (LIBOTF_CFLAGS, LIBOTF_LIBS, M17N_FLT_CFLAGS, M17N_FLT_LIBS)
113 (GNU_OBJC_CFLAGS, GNUSTEP_SYSTEM_LIBRARIES, LIBRESOLV, LIBGPM):
115 (LIB_MATH): Edit to -lm.
116 (UNEXEC_OBJ): Edit to unexec.o.
118 2010-05-12 Glenn Morris <rgm@gnu.org>
120 * sed3v2.inp (INSTALLABLES): No more @LIB_SRC_EXTRA_INSTALLABLES@.
122 * sed1v2.inp (LIB_GCC): Edit to -Lgcc.
124 2010-05-11 Glenn Morris <rgm@gnu.org>
126 * sed1x.inp (LIBS_SYSTEM): Edit to -lxext -lsys.
127 * sed3x.inp: New file.
129 2010-05-10 Glenn Morris <rgm@gnu.org>
131 * sed1v2.inp, sed3v2.inp (LIBS_SYSTEM): Edit to empty.
133 * sed3v2.inp (BLESSMAIL_TARGET): Edit to need-blessmail.
135 2010-05-07 Chong Yidong <cyd@stupidchicken.com>
137 * Version 23.2 released.
139 2010-05-08 Glenn Morris <rgm@gnu.org>
141 * sed1v2.inp (LIBS_TERMCAP): Edit to empty.
142 (TERMCAP_OBJ): Edit to tparam.o.
144 2010-05-07 Eli Zaretskii <eliz@gnu.org>
146 Fix breakage due to autoconfiscation of Makefile.in files.
148 * sed3v2.inp (C_SWITCH_MACHINE): Edit to empty.
150 * sed1v2.inp (@LIB_MATH@): Edit to -lm.
151 (C_SWITCH_MACHINE, C_SWITCH_SYSTEM, LD_SWITCH_SYSTEM_TEMACS)
152 (LD_SWITCH_X_SITE_AUX, LD_SWITCH_X_SITE_AUX_RPATH)
153 (LD_SWITCH_SYSTEM, LD_SWITCH_SYSTEM_EXTRA, LIBTIFF, LIBJPEG)
154 (LIBPNG, LIBGIF, LIBXPM, XFT_LIBS, DBUS_CFLAGS, DBUS_LIBS)
155 (DBUS_OBJ, GCONF_CFLAGS, GCONF_LIBS, GTK_OBJ, LIBXMU, LIBXSM)
156 (LIBXTR6, XOBJ, TOOLKIT_LIBW, WIDGET_OBJ, CYGWIN_OBJ, NS_OBJ)
157 (NS_SUPPORT, LIBSELINUX_LIBS, START_FILES): Edit to empty.
158 (XMENU_OBJ): Edit to xmenu.o.
159 (FONT_OBJ): Edit to value used for X on Unix.
160 (PRE_ALLOC_OBJ): Edit to lastfile.o.
161 (POST_ALLOC_OBJ): Edit to $(vmlimitobj).
162 (@unexec@): Edit to unexec.o.
164 2010-05-06 Glenn Morris <rgm@gnu.org>
166 * sed1v2.inp, sed5x.inp: Remove LN_S, unused.
168 2010-04-01 Eli Zaretskii <eliz@gnu.org>
170 Remove support for DJGPP v1.x.
175 * mainmake: Files removed.
177 2010-03-27 Eli Zaretskii <eliz@gnu.org>
179 * sedlisp.inp (VPATH): Don't edit, no longer needed.
180 (lisp, srcdir): Adapt to lisp/Makefile.in changes.
181 (abs_top_builddir): New edit.
183 * sed3v2.inp (KRB4LIB, DESLIB, KRB5LIB, CRYPTOLIB, COM_ERRLIB)
184 (LIBHESIOD, LIBRESOLV, LIBS_MAIL): Edit to empty values.
186 * sed3.inp (KRB4LIB, DESLIB, KRB5LIB, CRYPTOLIB, COM_ERRLIB)
187 (LIBHESIOD, LIBRESOLV, LIBS_MAIL): Edit to empty values.
189 * sed1v2.inp (abs_builddir): Edit into "../src".
191 2010-03-10 Chong Yidong <cyd@stupidchicken.com>
195 2010-02-19 Eli Zaretskii <eliz@gnu.org>
197 * INSTALL: Remove a CVS-specific note. Update for latest versions
200 2009-09-17 Eli Zaretskii <eliz@gnu.org>
202 * sed1v2.inp (OTHER_FILES): Edit to empty.
204 2009-09-11 Eli Zaretskii <eliz@gnu.org>
206 * mainmake.v2 (bootstrap): Ensure enough environment space
207 will be available to run config.bat.
209 2009-08-27 Eli Zaretskii <eliz@gnu.org>
211 * sed1v2.inp (buildobj.h): Replace "echo" with "djecho".
213 2009-06-21 Chong Yidong <cyd@stupidchicken.com>
217 2009-04-14 Eli Zaretskii <eliz@gnu.org>
219 * mainmake.v2 (src) <gdb.ini>: Don't replace the line with
220 x_error_quitter; instead, append "set environment NAME" to the end.
221 Set NAME and USERNAME in the environment to the same value.
223 2009-02-28 Eli Zaretskii <eliz@gnu.org>
225 * mainmake.v2 (boot): Don't require b-emacs.exe if not building
226 out of CVS. (Bug#2151)
228 2008-12-19 Eli Zaretskii <eliz@gnu.org>
230 * INSTALL: Document the problems on Windows Vista and the
231 --with-system-malloc option to config.bat.
233 * sedalloc.inp: New file.
235 2008-11-21 Eli Zaretskii <eliz@gnu.org>
237 * mainmake.v2 (misc): New target.
238 (all, info): Depend on `misc'.
240 2008-11-15 Eli Zaretskii <eliz@gnu.org>
242 * mainmake.v2 (src): Move removal of src/bootlisp after recursing
245 Make bootstrap work again:
247 * mainmake.v2 (boot): New variable.
248 (src): Pass $(boot) to sub-Make. Remove src/bootlisp. If
249 src/bootlisp exists after running Make, run Make in `lisp' as
251 (clean, mostlyclean): Remove bogus repeated clean in the top-level
253 (info, bootstrap-clean): New targets.
254 (bootstrap): Depend only on bootstrap-clean. Commands modified to
255 be equivalent to top-level Makefile.in.
256 (bootfast, bootstrap-lisp-1, bootstrap-lisp, bootstrap-src)
257 (bootstrap-clean-before, bootstrap-clean-after): Targets deleted.
258 (clean, mostlyclean, distclean, maintainer-clean, extraclean):
259 Don't recurse into lwlib and oldXMenu.
261 * sed1v2.inp: Create bootlisp when bootstrapping b-emacs.exe.
263 * sedlisp.inp: Don't convert *.el files to Unix text format, and
264 don't copy ldefs-boot.el into loaddefs.el.
266 * sed6.inp: Edit out Unixy shell features in maintainer-clean
267 targets in doc/ Makefiles.
269 * INSTALL: Update the list of utilities needed by lisp/Makefile
270 and for bootstrapping.
272 2008-11-08 Eli Zaretskii <eliz@gnu.org>
274 * INSTALL: New file, with build instructions moved from the
277 2008-10-14 Eli Zaretskii <eliz@gnu.org>
279 * sedlisp.inp (lisp): Set to absolute file name of current
280 directory, not to ".", to have it on EMACSLOADPATH when we descend
283 2008-08-23 Eli Zaretskii <eliz@gnu.org>
285 * sed2v2.inp: Remove definition of USER_FULL_NAME (now defined on
288 * sed3v2.inp: Edit out @LIB_SRC_EXTRA_INSTALLABLES@.
290 * sed1v2.inp (version): Define to empty.
291 (ALL_CFLAGS, LIBES): Edit out @FOO@ stuff.
292 (EXEEXT): Define to .exe.
293 Edit "ln -f" into "cp -pf".
294 Edit "touch" into "djecho $@ >", to avoid requiring touch.exe.
295 (b-emacs${EXEEXT}): Don't remove emacs.exe and temacs.exe.
296 Edit "`/bin/pwd`/" into "./".
297 Stubify emacs after it is dumped, to produce emacs.exe.
298 Stubedit temacs.exe to 1024K of stack, emacs.exe to 2048K, and
299 b-emacs.exe to 3072K.
301 * mainmake.v2 (emacs lispref lispintro): Chdir under doc/.
302 (emacs): Renamed from `man', to reflect changes in doc directory
303 structure. All callers changed.
304 (clean mostlyclean distclean maintainer-clean extraclean): Chdir
305 into doc/ for manuals. Add misc subdirectory.
306 (src): Pass an empty BOOTSTRAPEMACS variable to src/Makefile.
307 (install): Don't stubify/stubedit emacs.exe, this is now done by
310 2007-10-05 Eli Zaretskii <eliz@gnu.org>
312 * sed6.inp: Update comment to reflect doc directory structure.
314 * sed1v2.inp (RSVG_LIBS, RSVG_CFLAGS): Edit out.
316 2007-07-25 Glenn Morris <rgm@gnu.org>
318 * Relicense all FSF files to GPLv3 or later.
320 * COPYING: Switch to GPLv3.
322 2007-06-02 Chong Yidong <cyd@stupidchicken.com>
324 * Version 22.1 released.
326 2007-02-10 Glenn Morris <rgm@gnu.org>
328 * COPYING.DJ: Remove file since it is no longer needed (see README
331 2007-01-28 Glenn Morris <rgm@gnu.org>
333 * COPYING.DJ: New file.
335 2006-12-04 Eli Zaretskii <eliz@gnu.org>
337 * sed2v2.inp (HAVE_SYNC): Define.
339 2006-11-25 Eli Zaretskii <eliz@gnu.org>
341 * sed1v2.inp (CFLAGS_SOUND): Edit out.
343 2006-09-15 Jay Belanger <belanger@truman.edu>
345 * COPYING: Replace "Library Public License" by "Lesser Public
348 2005-09-10 Sven Joachim <svenjoac@gmx.de> (tiny change)
350 * sed3v2.inp (GETOPT_H, GETOPTOBJS): Define to use getopt.h,
351 getopt.o and getopt1.o.
353 2005-07-04 Lute Kamstra <lute@gnu.org>
355 Update FSF's address in GPL notices.
357 2004-11-10 Eli Zaretskii <eliz@gnu.org>
359 * sed1.inp: Revert last change.
361 2004-11-09 Jan Djärv <jan.h.d@swipnet.se>
363 * sed1v2.inp: Use djecho for buildobj.lst.
367 2004-11-08 Eli Zaretskii <eliz@gnu.org>
369 * sedlisp.inp (bootstrap-clean): Copy ldefs-boot.el onto
370 loaddefs.el, unless the latter exists and is newer.
372 * mainmake.v2 (mostlyclean, distclean, maintainer-clean)
373 (extraclean, bootfast): New targets.
374 (top_distclean): New macro, used by distclean, maintainer-clean,
376 (.PHONY): Add bootfast.
377 (bootstrap): Make bootstrap-after in lisp.
378 (bootstrap-clean-before): Clean in man, lispref, and lispintro as well.
380 * sed2v2.inp (HAVE_BZERO): Define for GCC v3.x and later.
382 2004-10-06 Eli Zaretskii <eliz@gnu.org>
384 * sed1v2.inp (LC_ALL=C): Fix src/Makefile breakage caused by
385 recent (2004-09-24) changes in src/Makefile.in.
387 2004-08-14 Eli Zaretskii <eliz@gnu.org>
389 * sedleim.inp: Remove the lines which say "<TAB>@true", to avoid
390 running a Unixy shell and to reincarnate the "Nothing to be done
391 for `all'" message from Make when there's nothing to be done.
393 2004-05-11 Eli Zaretskii <eliz@gnu.org>
395 * sedleim.inp (distclean): Remove stamp-subdirs.
396 (SUBDIRS): Don't use `touch', use `djecho' instead.
397 (changed.tit, changed.misc): Use `djecho' instead of `echo'.
399 2004-05-02 Eli Zaretskii <eliz@gnu.org>
401 * sed2v2.inp (HAVE_GETRUSAGE): Define.
403 2003-09-22 Eli Zaretskii <eliz@gnu.org>
405 * mainmake.v2 (man lispref lispintro): Specify an explicit target
406 `info', like Makefile.in does.
408 2003-08-31 Eli Zaretskii <eliz@gnu.org>
410 * sed3v2.inp (srcdir): Use "command.com /c cd" to produce an
411 absolute file name of the current working directory. This avoids
412 the warning from Make about circular dependencies.
414 2003-08-30 Eli Zaretskii <eliz@gnu.org>
416 * sedlisp.inp: Set FNCASE=y for all targets in the lisp directory,
417 so that CVS etc. file names are filtered out of the list of
420 2003-08-28 Eli Zaretskii <eliz@gnu.org>
422 * sed6.inp (elisp.dvi, index.texi): Replace Unix shell commands
423 with equivalent COMMAND.COM commands.
425 2003-08-24 Eli Zaretskii <eliz@gnu.org>
427 * sed3v2.inp (EXEEXT): Define to an empty string.
429 * sed1v2.inp (EXEEXT): Define to an empty string.
430 Remove src/emacs after producing b-emacs.exe.
432 * sed2v2.inp (HAVE_DIFFTIME, HAVE_MEMCMP, HAVE_MEMMOVE)
433 (HAVE_SIZE_T): Define.
435 2002-04-16 Eli Zaretskii <eliz@is.elta.co.il>
437 * sed2v2.inp: New file.
439 * sed2.inp: Remove DJGPP v2.x stuff.
441 2002-03-27 Eli Zaretskii <eliz@is.elta.co.il>
443 * sedlisp.inp <bootstrap-clean>: Make sure all *.el files have
444 Unix EOLs, to avoid overflowing pure storage while bootstrapping.
446 2002-03-20 Eli Zaretskii <eliz@is.elta.co.il>
448 * mainmake.v2 (bootstrap-lisp-1, bootstrap-lisp, bootstrap-src)
449 (bootstrap-clean-before, bootstrap-clean-after): Return to the
450 top-level directory after sub-make.
451 (bootstrap-lisp): Pass an absolute file name as value of ${lisp}.
453 * sed1v2.inp: Fix editing of the rule for ${libsrc}make-docfile.
455 2002-03-09 Eli Zaretskii <eliz@is.elta.co.il>
457 Add support for bootstrapping Emacs:
459 * sed1v2.inp: Edit the bootstrap-* targets. Fix the mostlyclean
462 * mainmake.v2 (maybe_bootstrap, bootstrap, bootstrap-lisp-1)
463 (bootstrap-lisp, bootstrap-src, bootstrap-clean-before)
464 (bootstrap-clean-after): New targets.
465 (all): Depend on maybe_bootstrap.
467 2001-12-21 Eli Zaretskii <eliz@is.elta.co.il>
469 * sed1v2.inp: Delete _gdbinit in distclean target.
471 2001-12-09 Pavel JanÃk <Pavel@Janik.cz>
473 * COPYING: Moved back.
475 2001-12-07 Eli Zaretskii <eliz@is.elta.co.il>
477 * sed2.inp (HAVE_VFORK): Don't define: the fragment in sysdep.c
478 which needed it is gone.
480 2001-11-29 Pavel JanÃk <Pavel@Janik.cz>
484 2001-11-24 Eli Zaretskii <eliz@is.elta.co.il>
486 * mainmake.v2 (lispintro): New target.
487 (all): Add lispintro.
489 * sed6.inp (SHELL): Comment away, for lispintro.
491 2001-11-10 Eli Zaretskii <eliz@is.elta.co.il>
493 * sed6.inp (texinputdir): Add, for the lispref directory.
495 * mainmake.v2 (all): Add lispref.
496 (man lispref): Add lispref.
498 2001-10-20 Gerd Moellmann <gerd@gnu.org>
500 * (Version 21.1 released.)
502 2001-10-05 Gerd Moellmann <gerd@gnu.org>
506 2001-07-20 Eli Zaretskii <eliz@is.elta.co.il>
508 * mainmake.v2 (install): Create site-lisp/subdirs.el if it is not
511 2001-07-06 Eli Zaretskii <eliz@is.elta.co.il>
513 * sed2.inp: Ifdef away the test for !HAVE_MKTIME, to avoid parse
514 error in "gcc -E -traditional" with GCC 3.0.
516 2001-04-02 Eli Zaretskii <eliz@is.elta.co.il>
518 * sedleim.inp (srcdir=): Edit @srcdir@ into an absolute file name
519 of the leim subdirectory, so that EMACSLOADPATH doesn't break when
520 titdic-convert chdirs into leim/quail.
522 2001-03-30 Eli Zaretskii <eliz@is.elta.co.il>
524 * sedleim.inp: Adapt to changes in leim/Makefile.in's $(TIT)
527 2001-03-01 Eli Zaretskii <eliz@is.elta.co.il>
531 * sed1.inp: Add copyright.
532 * sed1v2.inp: Add copyright.
533 * sed2.inp: Add copyright.
534 * sed2x.inp: Add copyright.
535 * sed3.inp: Add copyright.
536 * sed3v2.inp: Add copyright.
537 * sed4.inp: Add copyright.
538 * sed5x.inp: Add copyright.
539 * sed6.inp: Add copyright.
540 * sedleim.inp: Add copyright.
541 * sedlisp.inp: Add copyright.
543 2001-02-20 Eli Zaretskii <eliz@is.elta.co.il>
545 * mainmake.v2, mainmake: Add copyright.
547 2000-11-22 Eli Zaretskii <eliz@is.elta.co.il>
549 * sed2.inp (NSIG) [__DJGPP__ == 2 && __DJGPP_MINOR__ == 1]:
550 Define; it is undefined in DJGPP v2.01.
552 2000-11-13 Eli Zaretskii <eliz@is.elta.co.il>
554 * sed2.inp (HAVE_MKSTEMP): Define.
556 2000-10-07 Eli Zaretskii <eliz@is.elta.co.il>
558 * sedleim.inp (RUN-EMACS): Remove EMACSLOADPATH setting as part of
559 the command; use Make's "export EMACSLOADPATH=" instead. Remove
560 the handling of `command` expansion, leim/Makefile.in doesn't use
563 2000-08-29 Eli Zaretskii <eliz@is.elta.co.il>
565 * sed2.inp (HAVE_INDEX, HAVE_RINDEX): Define.
567 2000-08-22 Eli Zaretskii <eliz@is.elta.co.il>
569 * mainmake.v2 (TAGS): Don't use [a-zA-Z]*, as it causes wildcard
570 expansion to become case-sensitive and return all file names in
571 upper case on plain DOS.
573 2000-08-05 Eli Zaretskii <eliz@is.elta.co.il>
575 * mainmake.v2 (src): Put gdb.tmp after -a, since djecho's -a
576 switch requires an argument.
578 2000-07-31 Eli Zaretskii <eliz@is.elta.co.il>
580 * mainmake.v2 (src): Make the rule faster by using a single djecho
581 command instead of multiple redir invocations.
582 (install): Speed up by using a command.com's for loop.
584 2000-07-23 Eli Zaretskii <eliz@is.elta.co.il>
586 * sed3v2.inp: Define ALLOCA to an empty string.
588 2000-07-18 Eli Zaretskii <eliz@is.elta.co.il>
590 * sed1v2.inp: Put getloadavg.o into LIBOBJS, not GETLOADAVG_LIBS.
592 2000-07-09 Eli Zaretskii <eliz@is.elta.co.il>
594 * sed1v2.inp: Set LIBSOUND to an empty string.
596 2000-06-26 Eli Zaretskii <eliz@is.elta.co.il>
598 * sed2.inp: Define HAVE_STRUCT_TIMEZONE in src/config.h.
600 2000-06-25 Eli Zaretskii <eliz@is.elta.co.il>
602 * sed1v2.inp: Set GETLOADAVG_LIBS to getloadavg.o in src/Makefile.
604 2000-06-18 Eli Zaretskii <eliz@is.elta.co.il>
606 * sedlisp.inp (srcdir): Edit this variable.
608 2000-06-15 Eli Zaretskii <eliz@is.elta.co.il>
610 * sedlisp.inp: New file.
612 2000-05-18 Eli Zaretskii <eliz@is.elta.co.il>
614 * sed6.inp: Changes to allow "make foo.dvi" on DJGPP platforms:
615 (ENVADD): Redefine as empty, to avoid requiring a Unixy shell.
616 (TEXINPUTS): Use semi-colon; export explicitly.
617 (MAKEINFO): Export explicitly.
619 2000-05-01 Eli Zaretskii <eliz@is.elta.co.il>
621 * mainmake.v2 (install): Install ebrowse.exe.
623 2000-04-14 Dave Love <fx@gnu.org>
625 * sed1v2.inp, sed1.inp: Add LIBS, LIBOBJS.
627 2000-03-13 Eli Zaretskii <eliz@is.elta.co.il>
629 * sed2.inp: Add PROTOTYPES and POINTER_TYPE, per the new
632 2000-01-27 Eli Zaretskii <eliz@is.elta.co.il>
634 * sed2.inp (HAVE_SETITIMER): Define.
636 1999-11-18 Eli Zaretskii <eliz@is.elta.co.il>
638 * sed2.inp (HAVE_TM_GMTOFF, HAVE_MBLEN): Define.
640 * sed1v2.inp: Convert "LC_ALL=C ./temacs" to MS-DOS equivalent.
642 1999-07-29 Eli Zaretskii <eliz@gnu.org>
644 * sedleim.inp (SHELL, MAKESHELL): Use /xyzzy/command as the shell.
646 1999-07-12 Richard Stallman <rms@gnu.org>
648 * Version 20.4 released.
650 1999-07-01 Eli Zaretskii <eliz@gnu.org>
652 * mainmake.v2 (SHELL, MAKESHELL): Don't use /dos/command, it can
653 invoke an incompatible version of COMMAND.COM.
655 1999-05-19 Eli Zaretskii <eliz@gnu.org>
657 * sed1v2.inp: Use -gcoff instead of -g in CFLAGS, for those who
658 have GCC configured by default to use stabs, which unexec.c
659 doesn't currently support.
661 1999-01-14 Eli Zaretskii <eliz@gnu.org>
663 * mainmake.v2 (install): Use update instead of sed to install fns.el.
665 1999-01-11 Eli Zaretskii <eliz@gnu.org>
667 * mainmake.v2 (install): Install fns.el in ../bin, since Emacs
668 looks for it in exec-directory.
670 1999-01-07 Eli Zaretskii <eliz@gnu.org>
672 * sedleim.inp: New file, for configuring the leim directory.
674 * mainmake.v2 (src): Build files in leim if leim/Makefile exists.
675 (clean): Add clean in leim.
677 1998-11-08 Eli Zaretskii <eliz@mescaline.gnu.org>
679 * mainmake.v2 (SHELL, MAKESHELL): Don't use `override'.
681 1998-10-20 Eli Zaretskii <eliz@mescaline.gnu.org>
683 * mainmake.v2: Forcibly set SHELL and MAKESHELL to force Make to
684 use COMMAND.COM as the shell.
686 1998-08-19 Richard Stallman <rms@psilocin.ai.mit.edu>
688 * Version 20.3 released.
690 1998-05-04 Eli Zaretskii <eliz@mescaline.gnu.org>
692 * mainmake.v2 (TAGS tags): Fix file name wildcards in lisp
695 1998-04-13 Eli Zaretskii <eliz@delysid.gnu.org>
697 * mainmake.v2 (src): Replace topdir with top_srcdir in commands
698 which generate gdb.ini.
700 1998-04-12 Eli Zaretskii <eliz@delysid.gnu.org>
702 * mainmake.v2 (version): Determine emacs-version from
703 lisp/version.el. Pass it to sub-Make's.
705 1998-04-05 Eli Zaretskii <eliz@is.elta.co.il>
707 * sed3v2.inp: When installing ${version},
708 do it replacing @version@.
710 * mainmake.v2 (version): Compute the version from lisp/version.el
711 and pass to sub-Make's. Pass top_srcdir to sub-Make's.
713 1997-11-20 Eli Zaretskii <eliz@is.elta.co.il>
715 * sed6.inp: New file, configures the man directory for MSDOS.
717 * mainmake.v2 (man): New target to build the manual.
718 (all): Add the man dependency.
719 (install): Change bin\\nul to bin\nul.
721 1997-09-19 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
723 * Version 20.2 released.
725 1997-09-15 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
727 * Version 20.1 released.
729 1997-09-07 Eli Zaretskii <eliz@is.elta.co.il>
731 * sed1v2.inp: Enlarge the stack size of temacs to 100KB.
733 1997-08-13 Eli Zaretskii <eliz@psilocin.gnu.ai.mit.edu>
735 * sed2.inp (EMACS_CONFIGURATION): Set to i386-pc-msdosdjgpp.
737 1997-08-10 Eli Zaretskii <eliz@is.elta.co.il>
739 * sed1v2.inp (CPPFLAGS, LDFLAGS): Edit to empty.
741 1997-07-10 Eli Zaretskii <eliz@is.elta.co.il>
743 * sed2.inp (HAVE_LOGB, HAVE_FREXP, HAVE_FMOD, HAVE_RINT)
744 (HAVE_CBRT, HAVE_FPATHCONF, HAVE_SETRLIMIT): Defined.
746 * sed1.inp, sed1v2.inp: Remove `stamp-oldxmenu' dependency, so
747 MSDOS users won't need `touch' installed.
749 * mainmake.v2 (TAGS, tags): Include new lisp subdirectories.
751 1996-08-11 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
753 * Version 19.33 released.
755 1996-08-04 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
757 * is_exec.c: Renamed from is-exec.c.
759 1996-07-27 Richard Stallman <rms@psilocin.gnu.ai.mit.edu>
761 * Version 19.32 released.
763 * is-exec.c, sigaction.c: New files.
765 1996-07-24 Eli Zaretskii <eliz@is.elta.co.il>
767 * mainmake.v2 (TAGS): Make sure bin/etags.exe is current. Make
768 the rules always generate TAGS.
770 1996-06-09 Eli Zaretskii <eliz@is.elta.co.il>
772 * sed2.inp: Don't undef MULTI_FRAME.
774 1996-05-25 Karl Heuer <kwzh@gnu.ai.mit.edu>
776 * Version 19.31 released.
778 1996-04-17 Eli Zaretskii <eliz@is.elta.co.il>
780 * sed1.inp: Replace `make-docfile' with `make-doc.exe'. In case
781 src/Makefile needs to rebuild `make-doc.exe', use one command per line.
782 Undo the previous change.
784 1996-04-15 Richard Stallman <rms@mole.gnu.ai.mit.edu>
786 * sed1.inp: Change make-docfile to make-doc.exe in a second place.
788 1996-04-15 Eli Zaretskii <eliz@is.elta.co.il>
790 * mainmake.v2 (src): Create a file with sed commands instead of using
791 a long sed command line (some versions of Sed don't handle that).
792 (gdb): Merged back into src, undoing April 13 change.
793 (install): Do use if statements, but not a loop.
795 1996-04-13 Richard Stallman <rms@mole.gnu.ai.mit.edu>
797 * mainmake.v2 (gdb): New target, broken out of src.
798 (install): Use simple explicit copy commands, not a loop.
800 1996-04-10 Eli Zaretskii <eliz@is.elta.co.il>
802 * sed2.inp: Under DJGPP v2, use <sys/config.h> instead of most of
805 * sed1v2.inp, sed3v2.inp, mainmake.v2: New files.
807 1996-01-23 Karl Heuer <kwzh@gnu.ai.mit.edu>
809 * sed2.inp (LOCALTIME_CACHE, HAVE_TZSET): Define these.
811 1995-11-24 Richard Stallman <rms@mole.gnu.ai.mit.edu>
813 * Version 19.30 released.
815 1995-11-21 Richard Stallman <rms@mole.gnu.ai.mit.edu>
817 * sed3.inp: Alter test-distrib to test-dis.
819 1995-11-03 Karl Heuer <kwzh@gnu.ai.mit.edu>
821 * mainmake (install): Don't mv make-doc.exe into ../bin/.
823 1995-10-11 Kim Storm <kfstorm@wombat.gnu.ai.mit.edu>
825 * sed1.inp: Call make-doc.exe instead of make-docfile.
827 1995-06-08 Karl Heuer <kwzh@nutrimat.gnu.ai.mit.edu>
829 * sed2.inp: Define STDC_HEADERS.
830 Undefine MULTI_FRAME, until somebody fixes msdos.h and msdos.c.
832 1995-01-20 Karl Heuer <kwzh@hal.gnu.ai.mit.edu>
834 * sed3.inp: Fix sed append command to behave as intended.
836 1995-01-20 Morten Welinder <terra@diku.dk>
838 * sed3.inp: Delete mysterious dot. Add comment to protect blank
839 line at end of file. Make sure make-docfile is compiled.
841 1995-01-10 Karl Heuer <kwzh@hal.gnu.ai.mit.edu>
843 * sed3.inp: Use coff2exe on make-docfile.
844 * sed1.inp: Not go32, which has problems with long arg lists.
846 1994-10-17 Morten Welinder <terra@mole.gnu.ai.mit.edu>
848 * sed1.inp: Handle "\t#"-style comments.
849 (obj): Don't add any files -- now done in src/makefile.in.in
850 (temacs): Don't depend on prefix-args.
851 (DOC): Reflect makefile changes regarding two-batch run.
853 * sed2.inp: Add comments showing how to use the system malloc.
854 (EMACS_CONFIG_OPTIONS): Set though not useful.
855 (HAVE_MKTIME): Define.
857 * mainmake (clean): Add target.
859 * sed1x.inp, sed2x.inp, sed5x.inp: New files for X configuration.
861 1994-07-14 Morten Welinder (terra@diku.dk)
863 * sed2.inp (HAVE_STRERROR): Define.
865 1994-07-08 Morten Welinder (terra@diku.dk)
867 * sed1.inp, sed2.inp: Use "m/intel386" instead of "m/dos386.h".
869 1994-06-01 Morten Welinder (terra@diku.dk)
871 * sed4.inp: New file for configuring src/paths.h.
873 1994-05-30 Richard Stallman (rms@mole.gnu.ai.mit.edu)
875 * Version 19.25 released.
877 1994-05-22 Morten Welinder (terra@diku.dk)
879 * sed1.inp: Adding dos-fns.elc to the set of lisp files was moved
880 to src/makefile.in.in.
882 1994-05-20 Morten Welinder (terra@tyr.diku.dk)
884 * sed2.inp: Reflect change from CONFIGURATION to EMACS_CONFIGURATION.
885 Also set it to correct three-part value.
887 1994-05-16 Morten Welinder (terra@tyr.diku.dk)
889 * Version 19.23 released.
891 * sed1.inp: Don't use `+' in regexps as different stream
892 editors interpret them differently. Use `*' instead.
894 1994-05-12 Morten Welinder (terra@diku.dk)
896 * mainmake (install): Set the minimum stack (for running under
897 DPMI) to 512K. Avoid using wildcard for matching one file.
899 1994-05-08 Morten Welinder (terra@diku.dk)
901 * sed3.inp: Don't pass version to [ce]tags.
903 1994-04-30 Morten Welinder (terra@diku.dk)
905 * sed1.inp: Don't comment out the inc-vers run as that
906 does not exist anymore.
907 Don't reset DEBUG_MOLE as that no longer is used.
908 Identify the file being patched as src/...
909 * sed2.inp: Identify the file being patched as src/...
910 * sed3.inp: We don't have to have the version number in here
911 anymore. Instead we patch the way it is passed from make to
914 1994-04-29 Morten Welinder (terra@diku.dk)
916 * sed1.inp: Set CFLAGS=-O2, not -g. Handle the new
917 M_FILE, S_FILE, and SET_MAKE defines. Get rid of ^Ms.
919 * sed2.inp: We have bcmp. Configuration is "msdos".
922 * sed3.inp: Set CFLAGS=-O2, not -g. Correct for
923 new configuration regarding utilities not to compile.
924 Fix version number. Get rid of ^Ms.
926 1994-01-08 Morten Welinder (terra@diku.dk)
928 * sed3.inp: Improve make-compatibility by not using drive
929 specifications and by not specifying an explicit shell.
931 1994-01-07 Morten Welinder (terra@diku.dk)
933 * sed1.inp: Incorporate the actions of patch1.
934 * patch1: File deleted.
936 1993-01-05 Morten Welinder (terra@diku.dk)
938 * mainmake: New file, makefile for the main directory.
940 * patch1: New file. Context diff to turn src/makefile.in into
941 a msdos version called makefile.
943 * emacs.pif: New file, program information file for Emacs under
944 Windows. (This file contains non-printable characters.)
946 * emacs.ico: New file, icon for Emacs under Windows. It's so ugly
947 that someone is bound to create a better one. Mail uuencoded icons
948 to terra@diku.dk, but be prepared to sign a copyright disclaimer.
949 (This file contains non-printable characters.)
951 * sed3.inp: New file for changing lib-src/makefile.in into
954 * sed2.inp: New file for changing src/config.h-in into src/config.h.
956 * sed1.inp: New file for changing src/makefile.in.in into src/makefile.
960 ;; add-log-time-zone-rule: t
963 Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2001, 2002, 2003,
964 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software Foundation, Inc.
966 This file is part of GNU Emacs.
968 GNU Emacs is free software: you can redistribute it and/or modify
969 it under the terms of the GNU General Public License as published by
970 the Free Software Foundation, either version 3 of the License, or
971 (at your option) any later version.
973 GNU Emacs is distributed in the hope that it will be useful,
974 but WITHOUT ANY WARRANTY; without even the implied warranty of
975 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
976 GNU General Public License for more details.
978 You should have received a copy of the GNU General Public License
979 along with GNU Emacs. If not, see <http://www.gnu.org/licenses/>.
981 ;;; arch-tag: b602fbb5-3776-4053-8de2-03da33c29d44