2 * Copyright (c) 1990 The Regents of the University of California.
5 * This code is derived from software contributed to Berkeley by
8 * Libretto PCMCIA floppy support by David Horwitt (dhorwitt@ucsd.edu)
9 * aided by the Linux floppy driver modifications from David Bateman
10 * (dbateman@eng.uts.edu.au).
12 * Copyright (c) 1993, 1994 by
13 * jc@irbs.UUCP (John Capo)
14 * vak@zebub.msk.su (Serge Vakulenko)
15 * ache@astral.msk.su (Andrew A. Chernov)
17 * Copyright (c) 1993, 1994, 1995 by
18 * joerg_wunsch@uriah.sax.de (Joerg Wunsch)
19 * dufault@hda.com (Peter Dufault)
21 * Copyright (c) 2001 Joerg Wunsch,
22 * joerg_wunsch@uriah.sax.de (Joerg Wunsch)
24 * Redistribution and use in source and binary forms, with or without
25 * modification, are permitted provided that the following conditions
27 * 1. Redistributions of source code must retain the above copyright
28 * notice, this list of conditions and the following disclaimer.
29 * 2. Redistributions in binary form must reproduce the above copyright
30 * notice, this list of conditions and the following disclaimer in the
31 * documentation and/or other materials provided with the distribution.
32 * 3. All advertising materials mentioning features or use of this software
33 * must display the following acknowledgement:
34 * This product includes software developed by the University of
35 * California, Berkeley and its contributors.
36 * 4. Neither the name of the University nor the names of its contributors
37 * may be used to endorse or promote products derived from this software
38 * without specific prior written permission.
40 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
41 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
42 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
43 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
44 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
45 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
46 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
47 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
48 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
49 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
52 * from: @(#)fd.c 7.4 (Berkeley) 5/25/91
53 * $FreeBSD: src/sys/isa/fd.c,v 1.176.2.8 2002/05/15 21:56:14 joerg Exp $
54 * $DragonFly: src/sys/dev/disk/fd/fd.c,v 1.43 2008/08/13 08:18:09 swildner Exp $
59 #include "use_pccard.h"
61 #include <sys/param.h>
62 #include <sys/systm.h>
63 #include <sys/bootmaj.h>
64 #include <sys/kernel.h>
68 #include <sys/diskslice.h>
70 #include <sys/devicestat.h>
71 #include <sys/fcntl.h>
72 #include <sys/malloc.h>
73 #include <sys/module.h>
75 #include <sys/syslog.h>
76 #include <sys/device.h>
80 #include <sys/thread2.h>
82 #include <machine/clock.h>
83 #include <machine/ioctl_fd.h>
84 #include <machine/stdarg.h>
86 #include <bus/isa/isavar.h>
87 #include <bus/isa/isareg.h>
90 #include <bus/isa/rtc.h>
92 /* configuration flags */
93 #define FDC_PRETEND_D0 (1 << 0) /* pretend drive 0 to be there */
94 #define FDC_NO_FIFO (1 << 2) /* do not enable FIFO */
96 /* internally used only, not really from CMOS: */
97 #define RTCFDT_144M_PRETENDED 0x1000
99 /* error returns for fd_cmd() */
101 #define FD_NOT_VALID -2
102 #define FDC_ERRMAX 100 /* do not log more */
104 * Stop retrying after this many DMA overruns. Since each retry takes
105 * one revolution, with 300 rpm., 25 retries take approximately 10
106 * seconds which the read attempt will block in case the DMA overrun
109 #define FDC_DMAOV_MAX 25
112 * Timeout value for the PIO loops to wait until the FDC main status
113 * register matches our expectations (request for master, direction
114 * bit). This is supposed to be a number of microseconds, although
115 * timing might actually not be very accurate.
117 * Timeouts of 100 msec are believed to be required for some broken
120 #define FDSTS_TIMEOUT 100000
123 #define NUMDENS (NUMTYPES - 7)
125 /* These defines (-1) must match index for fd_types */
126 #define F_TAPE_TYPE 0x020 /* bit for fd_types to indicate tape */
127 #define NO_TYPE 0 /* must match NO_TYPE in ft.c */
139 #define FD_1480in5_25 11
140 #define FD_1440in5_25 12
141 #define FD_820in5_25 13
142 #define FD_800in5_25 14
143 #define FD_720in5_25 15
144 #define FD_360in5_25 16
145 #define FD_640in5_25 17
148 static struct fd_type fd_types
[NUMTYPES
] =
150 { 21,2,0xFF,0x04,82,3444,1,FDC_500KBPS
,2,0x0C,2 }, /* 1.72M in HD 3.5in */
151 { 18,2,0xFF,0x1B,82,2952,1,FDC_500KBPS
,2,0x6C,1 }, /* 1.48M in HD 3.5in */
152 { 18,2,0xFF,0x1B,80,2880,1,FDC_500KBPS
,2,0x6C,1 }, /* 1.44M in HD 3.5in */
153 { 15,2,0xFF,0x1B,80,2400,1,FDC_500KBPS
,2,0x54,1 }, /* 1.2M in HD 5.25/3.5 */
154 { 10,2,0xFF,0x10,82,1640,1,FDC_250KBPS
,2,0x2E,1 }, /* 820K in HD 3.5in */
155 { 10,2,0xFF,0x10,80,1600,1,FDC_250KBPS
,2,0x2E,1 }, /* 800K in HD 3.5in */
156 { 9,2,0xFF,0x20,80,1440,1,FDC_250KBPS
,2,0x50,1 }, /* 720K in HD 3.5in */
157 { 9,2,0xFF,0x2A,40, 720,1,FDC_250KBPS
,2,0x50,1 }, /* 360K in DD 5.25in */
158 { 8,2,0xFF,0x2A,80,1280,1,FDC_250KBPS
,2,0x50,1 }, /* 640K in DD 5.25in */
159 { 8,3,0xFF,0x35,77,1232,1,FDC_500KBPS
,2,0x74,1 }, /* 1.23M in HD 5.25in */
161 { 18,2,0xFF,0x02,82,2952,1,FDC_500KBPS
,2,0x02,2 }, /* 1.48M in HD 5.25in */
162 { 18,2,0xFF,0x02,80,2880,1,FDC_500KBPS
,2,0x02,2 }, /* 1.44M in HD 5.25in */
163 { 10,2,0xFF,0x10,82,1640,1,FDC_300KBPS
,2,0x2E,1 }, /* 820K in HD 5.25in */
164 { 10,2,0xFF,0x10,80,1600,1,FDC_300KBPS
,2,0x2E,1 }, /* 800K in HD 5.25in */
165 { 9,2,0xFF,0x20,80,1440,1,FDC_300KBPS
,2,0x50,1 }, /* 720K in HD 5.25in */
166 { 9,2,0xFF,0x23,40, 720,2,FDC_300KBPS
,2,0x50,1 }, /* 360K in HD 5.25in */
167 { 8,2,0xFF,0x2A,80,1280,1,FDC_300KBPS
,2,0x50,1 }, /* 640K in HD 5.25in */
170 #define DRVS_PER_CTLR 2 /* 2 floppies */
172 /***********************************************************************\
173 * Per controller structure. *
174 \***********************************************************************/
175 devclass_t fdc_devclass
;
177 /***********************************************************************\
178 * Per drive structure. *
179 * N per controller (DRVS_PER_CTLR) *
180 \***********************************************************************/
182 struct fdc_data
*fdc
; /* pointer to controller structure */
183 int fdsu
; /* this units number on this controller */
184 int type
; /* Drive type (FD_1440...) */
185 struct fd_type ft
; /* the type descriptor */
187 #define FD_OPEN 0x01 /* it's open */
188 #define FD_ACTIVE 0x02 /* it's active */
189 #define FD_MOTOR 0x04 /* motor should be on */
190 #define FD_MOTOR_WAIT 0x08 /* motor coming up */
193 #define FD_NO_TRACK -2
194 int track
; /* where we think the head is */
195 int options
; /* user configurable options, see ioctl_fd.h */
196 struct callout toffhandle
;
197 struct callout tohandle
;
198 struct callout motor
;
200 struct devstat device_stats
;
208 static devclass_t fd_devclass
;
210 /***********************************************************************\
211 * Throughout this file the following conventions will be used: *
212 * fd is a pointer to the fd_data struct for the drive in question *
213 * fdc is a pointer to the fdc_data struct for the controller *
214 * fdu is the floppy drive unit number *
215 * fdcu is the floppy controller unit number *
216 * fdsu is the floppy drive unit number on that controller. (sub-unit) *
217 \***********************************************************************/
219 /* internal functions */
220 static void fdc_intr(void *);
221 static void set_motor(struct fdc_data
*, int, int);
224 static timeout_t fd_turnoff
;
225 static timeout_t fd_motor_on
;
226 static void fd_turnon(struct fd_data
*);
227 static void fdc_reset(fdc_p
);
228 static int fd_in(struct fdc_data
*, int *);
229 static int out_fdc(struct fdc_data
*, int);
230 static void fdstart(struct fdc_data
*);
231 static timeout_t fd_iotimeout
;
232 static timeout_t fd_pseudointr
;
233 static int fdstate(struct fdc_data
*);
234 static int retrier(struct fdc_data
*);
235 static int fdformat(cdev_t
, struct fd_formb
*, struct ucred
*);
237 static int enable_fifo(fdc_p fdc
);
239 static int fifo_threshold
= 8; /* XXX: should be accessible via sysctl */
245 #define SEEKCOMPLETE 3
247 #define RECALCOMPLETE 5
253 #define IOTIMEDOUT 11
254 #define RESETCOMPLETE 12
258 static char const * const fdstates
[] =
276 /* CAUTION: fd_debug causes huge amounts of logging output */
277 static int volatile fd_debug
= 0;
278 #define TRACE0(arg) if(fd_debug) kprintf(arg)
279 #define TRACE1(arg1, arg2) if(fd_debug) kprintf(arg1, arg2)
280 #else /* FDC_DEBUG */
282 #define TRACE1(arg1, arg2)
283 #endif /* FDC_DEBUG */
286 fdout_wr(fdc_p fdc
, u_int8_t v
)
288 bus_space_write_1(fdc
->portt
, fdc
->porth
, FDOUT
+fdc
->port_off
, v
);
294 return bus_space_read_1(fdc
->portt
, fdc
->porth
, FDSTS
+fdc
->port_off
);
298 fddata_wr(fdc_p fdc
, u_int8_t v
)
300 bus_space_write_1(fdc
->portt
, fdc
->porth
, FDDATA
+fdc
->port_off
, v
);
306 return bus_space_read_1(fdc
->portt
, fdc
->porth
, FDDATA
+fdc
->port_off
);
310 fdctl_wr_isa(fdc_p fdc
, u_int8_t v
)
312 bus_space_write_1(fdc
->ctlt
, fdc
->ctlh
, 0, v
);
320 return bus_space_read_1(fdc
->portt
, fdc
->porth
, FDIN
);
325 static d_open_t Fdopen
; /* NOTE, not fdopen */
326 static d_close_t fdclose
;
327 static d_ioctl_t fdioctl
;
328 static d_strategy_t fdstrategy
;
330 static struct dev_ops fd_ops
= {
331 { "fd", FD_CDEV_MAJOR
, D_DISK
},
335 .d_write
= physwrite
,
337 .d_strategy
= fdstrategy
,
341 fdc_err(struct fdc_data
*fdc
, const char *s
)
345 if (fdc
->fdc_errs
< FDC_ERRMAX
)
346 device_printf(fdc
->fdc_dev
, "%s", s
);
347 else if (fdc
->fdc_errs
== FDC_ERRMAX
)
348 device_printf(fdc
->fdc_dev
, "too many errors, not "
349 "logging any more\n");
356 * fd_cmd: Send a command to the chip. Takes a varargs with this structure:
358 * # of output bytes, output bytes as ints ...,
359 * # of input bytes, input bytes as ints ...
362 fd_cmd(struct fdc_data
*fdc
, int n_out
, ...)
369 __va_start(ap
, n_out
);
370 cmd
= (u_char
)(__va_arg(ap
, int));
372 __va_start(ap
, n_out
);
373 for (n
= 0; n
< n_out
; n
++)
375 if (out_fdc(fdc
, __va_arg(ap
, int)) < 0)
378 ksnprintf(msg
, sizeof(msg
),
379 "cmd %x failed at out byte %d of %d\n",
381 return fdc_err(fdc
, msg
);
384 n_in
= __va_arg(ap
, int);
385 for (n
= 0; n
< n_in
; n
++)
387 int *ptr
= __va_arg(ap
, int *);
388 if (fd_in(fdc
, ptr
) < 0)
391 ksnprintf(msg
, sizeof(msg
),
392 "cmd %02x failed at in byte %d of %d\n",
394 return fdc_err(fdc
, msg
);
402 enable_fifo(fdc_p fdc
)
406 if ((fdc
->flags
& FDC_HAS_FIFO
) == 0) {
410 * Cannot use fd_cmd the normal way here, since
411 * this might be an invalid command. Thus we send the
412 * first byte, and check for an early turn of data directon.
415 if (out_fdc(fdc
, I8207X_CONFIGURE
) < 0)
416 return fdc_err(fdc
, "Enable FIFO failed\n");
418 /* If command is invalid, return */
420 while ((i
= fdsts_rd(fdc
) & (NE7_DIO
| NE7_RQM
))
421 != NE7_RQM
&& j
-- > 0) {
422 if (i
== (NE7_DIO
| NE7_RQM
)) {
430 0, (fifo_threshold
- 1) & 0xf, 0, 0) < 0) {
432 return fdc_err(fdc
, "Enable FIFO failed\n");
434 fdc
->flags
|= FDC_HAS_FIFO
;
438 I8207X_CONFIGURE
, 0, (fifo_threshold
- 1) & 0xf, 0, 0) < 0)
439 return fdc_err(fdc
, "Re-enable FIFO failed\n");
444 fd_sense_drive_status(fdc_p fdc
, int *st3p
)
448 if (fd_cmd(fdc
, 2, NE7CMD_SENSED
, fdc
->fdu
, 1, &st3
))
450 return fdc_err(fdc
, "Sense Drive Status failed\n");
459 fd_sense_int(fdc_p fdc
, int *st0p
, int *cylp
)
463 ret
= fd_cmd(fdc
, 1, NE7CMD_SENSEI
, 1, &st0
);
466 "sense intr err reading stat reg 0\n");
473 if ((st0
& NE7_ST0_IC
) == NE7_ST0_IC_IV
) {
475 * There doesn't seem to have been an interrupt.
480 if (fd_in(fdc
, &cyl
) < 0) {
481 return fdc_err(fdc
, "can't get cyl num\n");
492 fd_read_status(fdc_p fdc
, int fdsu
)
496 for (i
= 0; i
< 7; i
++) {
498 * XXX types are poorly chosen. Only bytes can by read
499 * from the hardware, but fdc->status[] wants u_ints and
500 * fd_in() gives ints.
504 ret
= fd_in(fdc
, &status
);
505 fdc
->status
[i
] = status
;
511 fdc
->flags
|= FDC_STAT_VALID
;
513 fdc
->flags
&= ~FDC_STAT_VALID
;
518 /****************************************************************************/
519 /* autoconfiguration stuff */
520 /****************************************************************************/
523 fdc_alloc_resources(struct fdc_data
*fdc
)
529 ispnp
= (fdc
->flags
& FDC_ISPNP
) != 0;
530 ispcmcia
= (fdc
->flags
& FDC_ISPCMCIA
) != 0;
531 fdc
->rid_ioport
= fdc
->rid_irq
= fdc
->rid_drq
= 0;
532 fdc
->res_ioport
= fdc
->res_irq
= fdc
->res_drq
= 0;
535 * On standard ISA, we don't just use an 8 port range
536 * (e.g. 0x3f0-0x3f7) since that covers an IDE control
539 * Isn't PC hardware wonderful.
541 * The Y-E Data PCMCIA FDC doesn't have this problem, it
542 * uses the register with offset 6 for pseudo-DMA, and the
543 * one with offset 7 as control register.
545 fdc
->res_ioport
= bus_alloc_resource(dev
, SYS_RES_IOPORT
,
546 &fdc
->rid_ioport
, 0ul, ~0ul,
547 ispcmcia
? 8 : (ispnp
? 1 : 6),
549 if (fdc
->res_ioport
== 0) {
550 device_printf(dev
, "cannot reserve I/O port range\n");
553 fdc
->portt
= rman_get_bustag(fdc
->res_ioport
);
554 fdc
->porth
= rman_get_bushandle(fdc
->res_ioport
);
558 * Some BIOSen report the device at 0x3f2-0x3f5,0x3f7
559 * and some at 0x3f0-0x3f5,0x3f7. We detect the former
560 * by checking the size and adjust the port address
563 if (bus_get_resource_count(dev
, SYS_RES_IOPORT
, 0) == 4)
567 * Register the control port range as rid 1 if it
568 * isn't there already. Most PnP BIOSen will have
569 * already done this but non-PnP configurations don't.
571 * And some (!!) report 0x3f2-0x3f5 and completely
572 * leave out the control register! It seems that some
573 * non-antique controller chips have a different
574 * method of programming the transfer speed which
575 * doesn't require the control register, but it's
576 * mighty bogus as the chip still responds to the
577 * address for the control register.
579 if (bus_get_resource_count(dev
, SYS_RES_IOPORT
, 1) == 0) {
582 /* Find the control port, usually 0x3f7 */
583 ctlstart
= rman_get_start(fdc
->res_ioport
) +
586 bus_set_resource(dev
, SYS_RES_IOPORT
, 1, ctlstart
, 1);
590 * Now (finally!) allocate the control port.
593 fdc
->res_ctl
= bus_alloc_resource(dev
, SYS_RES_IOPORT
,
595 0ul, ~0ul, 1, RF_ACTIVE
);
596 if (fdc
->res_ctl
== 0) {
598 "cannot reserve control I/O port range\n");
601 fdc
->ctlt
= rman_get_bustag(fdc
->res_ctl
);
602 fdc
->ctlh
= rman_get_bushandle(fdc
->res_ctl
);
605 fdc
->res_irq
= bus_alloc_resource(dev
, SYS_RES_IRQ
,
606 &fdc
->rid_irq
, 0ul, ~0ul, 1,
608 if (fdc
->res_irq
== 0) {
609 device_printf(dev
, "cannot reserve interrupt line\n");
613 if ((fdc
->flags
& FDC_NODMA
) == 0) {
614 fdc
->res_drq
= bus_alloc_resource(dev
, SYS_RES_DRQ
,
615 &fdc
->rid_drq
, 0ul, ~0ul, 1,
617 if (fdc
->res_drq
== 0) {
618 device_printf(dev
, "cannot reserve DMA request line\n");
621 fdc
->dmachan
= fdc
->res_drq
->r_start
;
628 fdc_release_resources(struct fdc_data
*fdc
)
633 if (fdc
->res_irq
!= 0) {
634 bus_deactivate_resource(dev
, SYS_RES_IRQ
, fdc
->rid_irq
,
636 bus_release_resource(dev
, SYS_RES_IRQ
, fdc
->rid_irq
,
639 if (fdc
->res_ctl
!= 0) {
640 bus_deactivate_resource(dev
, SYS_RES_IOPORT
, fdc
->rid_ctl
,
642 bus_release_resource(dev
, SYS_RES_IOPORT
, fdc
->rid_ctl
,
645 if (fdc
->res_ioport
!= 0) {
646 bus_deactivate_resource(dev
, SYS_RES_IOPORT
, fdc
->rid_ioport
,
648 bus_release_resource(dev
, SYS_RES_IOPORT
, fdc
->rid_ioport
,
651 if (fdc
->res_drq
!= 0) {
652 bus_deactivate_resource(dev
, SYS_RES_DRQ
, fdc
->rid_drq
,
654 bus_release_resource(dev
, SYS_RES_DRQ
, fdc
->rid_drq
,
659 /****************************************************************************/
660 /* autoconfiguration stuff */
661 /****************************************************************************/
663 static struct isa_pnp_id fdc_ids
[] = {
664 {0x0007d041, "PC standard floppy disk controller"}, /* PNP0700 */
665 {0x0107d041, "Standard floppy controller supporting MS Device Bay Spec"}, /* PNP0701 */
670 fdc_read_ivar(device_t dev
, device_t child
, int which
, u_long
*result
)
672 struct fdc_ivars
*ivars
= device_get_ivars(child
);
675 case FDC_IVAR_FDUNIT
:
676 *result
= ivars
->fdunit
;
685 * fdc controller section.
688 fdc_probe(device_t dev
)
691 struct fdc_data
*fdc
;
693 fdc
= device_get_softc(dev
);
694 bzero(fdc
, sizeof *fdc
);
696 fdc
->fdctl_wr
= fdctl_wr_isa
;
699 error
= ISA_PNP_PROBE(device_get_parent(dev
), dev
, fdc_ids
);
703 fdc
->flags
|= FDC_ISPNP
;
705 /* Attempt to allocate our resources for the duration of the probe */
706 error
= fdc_alloc_resources(fdc
);
710 /* First - lets reset the floppy controller */
713 fdout_wr(fdc
, FDO_FRST
);
715 /* see if it can handle a command */
716 if (fd_cmd(fdc
, 3, NE7CMD_SPECIFY
, NE7_SPEC_1(3, 240),
717 NE7_SPEC_2(2, 0), 0)) {
722 if (fd_cmd(fdc
, 1, NE7CMD_VERSION
, 1, &ic_type
) == 0) {
723 ic_type
= (u_char
)ic_type
;
726 device_set_desc(dev
, "NEC 765 or clone");
727 fdc
->fdct
= FDC_NE765
;
730 device_set_desc(dev
, "Intel 82077 or clone");
731 fdc
->fdct
= FDC_I82077
;
734 device_set_desc(dev
, "NEC 72065B or clone");
735 fdc
->fdct
= FDC_NE72065
;
738 device_set_desc(dev
, "generic floppy controller");
739 fdc
->fdct
= FDC_UNKNOWN
;
745 fdc_release_resources(fdc
);
750 * Add a child device to the fdc controller. It will then be probed etc.
753 fdc_add_child(device_t dev
, const char *name
, int unit
)
756 struct fdc_ivars
*ivar
;
759 ivar
= kmalloc(sizeof *ivar
, M_DEVBUF
/* XXX */, M_WAITOK
| M_ZERO
);
760 if (resource_int_value(name
, unit
, "drive", &ivar
->fdunit
) != 0)
762 child
= device_add_child(dev
, name
, unit
);
765 device_set_ivars(child
, ivar
);
766 if (resource_int_value(name
, unit
, "disabled", &disabled
) == 0
768 device_disable(child
);
772 fdc_attach(device_t dev
)
774 struct fdc_data
*fdc
;
777 fdc
= device_get_softc(dev
);
779 callout_init(&fdc
->pseudointr_ch
);
781 error
= fdc_alloc_resources(fdc
);
783 device_printf(dev
, "cannot reacquire resources\n");
786 error
= BUS_SETUP_INTR(device_get_parent(dev
), dev
, fdc
->res_irq
,
788 &fdc
->fdc_intr
, NULL
);
790 device_printf(dev
, "cannot setup interrupt\n");
793 fdc
->fdcu
= device_get_unit(dev
);
794 fdc
->flags
|= FDC_ATTACHED
;
796 if ((fdc
->flags
& FDC_NODMA
) == 0) {
797 /* Acquire the DMA channel forever, The driver will do the rest */
798 /* XXX should integrate with rman */
799 isa_dma_acquire(fdc
->dmachan
);
800 isa_dmainit(fdc
->dmachan
, 128 << 3 /* XXX max secsize */);
802 fdc
->state
= DEVIDLE
;
804 /* reset controller, turn motor off, clear fdout mirror reg */
805 fdout_wr(fdc
, ((fdc
->fdout
= 0)));
806 bioq_init(&fdc
->bio_queue
);
809 * Probe and attach any children. We should probably detect
810 * devices from the BIOS unless overridden.
812 for (i
= resource_query_string(-1, "at", device_get_nameunit(dev
));
814 i
= resource_query_string(i
, "at", device_get_nameunit(dev
)))
815 fdc_add_child(dev
, resource_query_name(i
),
816 resource_query_unit(i
));
818 return (bus_generic_attach(dev
));
822 fdc_print_child(device_t me
, device_t child
)
826 retval
+= bus_print_child_header(me
, child
);
827 retval
+= kprintf(" on %s drive %d\n", device_get_nameunit(me
),
828 fdc_get_fdunit(child
));
833 static device_method_t fdc_methods
[] = {
834 /* Device interface */
835 DEVMETHOD(device_probe
, fdc_probe
),
836 DEVMETHOD(device_attach
, fdc_attach
),
837 DEVMETHOD(device_detach
, bus_generic_detach
),
838 DEVMETHOD(device_shutdown
, bus_generic_shutdown
),
839 DEVMETHOD(device_suspend
, bus_generic_suspend
),
840 DEVMETHOD(device_resume
, bus_generic_resume
),
843 DEVMETHOD(bus_print_child
, fdc_print_child
),
844 DEVMETHOD(bus_read_ivar
, fdc_read_ivar
),
845 /* Our children never use any other bus interface methods. */
850 static driver_t fdc_driver
= {
853 sizeof(struct fdc_data
)
856 DRIVER_MODULE(fdc
, isa
, fdc_driver
, fdc_devclass
, 0, 0);
857 DRIVER_MODULE(fdc
, acpi
, fdc_driver
, fdc_devclass
, 0, 0);
859 /******************************************************************/
861 * devices attached to the controller section.
864 fd_probe(device_t dev
)
869 struct fdc_data
*fdc
;
871 static int fd_fifo
= 0;
873 fdsu
= *(int *)device_get_ivars(dev
); /* xxx cheat a bit... */
874 fd
= device_get_softc(dev
);
875 fdc
= device_get_softc(device_get_parent(dev
));
877 bzero(fd
, sizeof *fd
);
881 fd
->fdu
= device_get_unit(dev
);
884 /* look up what bios thinks we have */
887 if ((fdc
->flags
& FDC_ISPCMCIA
))
889 else if (device_get_flags(fdc
->fdc_dev
) & FDC_PRETEND_D0
)
890 fdt
= RTCFDT_144M
| RTCFDT_144M_PRETENDED
;
892 fdt
= (rtcin(RTC_FDISKETTE
) & 0xf0);
895 fdt
= ((rtcin(RTC_FDISKETTE
) << 4) & 0xf0);
902 fdt
= RTCFDT_144M
; /* XXX probably */
905 /* is there a unit? */
906 if (fdt
== RTCFDT_NONE
)
910 set_motor(fdc
, fdsu
, TURNON
);
911 DELAY(1000000); /* 1 sec */
913 /* XXX This doesn't work before the first set_motor() */
914 if (fd_fifo
== 0 && fdc
->fdct
!= FDC_NE765
&& fdc
->fdct
!= FDC_UNKNOWN
915 && (device_get_flags(fdc
->fdc_dev
) & FDC_NO_FIFO
) == 0
916 && enable_fifo(fdc
) == 0) {
917 device_printf(device_get_parent(dev
),
918 "FIFO enabled, %d bytes threshold\n", fifo_threshold
);
922 if ((fd_cmd(fdc
, 2, NE7CMD_SENSED
, fdsu
, 1, &st3
) == 0)
923 && (st3
& NE7_ST3_T0
)) {
924 /* if at track 0, first seek inwards */
925 /* seek some steps: */
926 fd_cmd(fdc
, 3, NE7CMD_SEEK
, fdsu
, 10, 0);
927 DELAY(300000); /* ...wait a moment... */
928 fd_sense_int(fdc
, 0, 0); /* make ctrlr happy */
931 /* If we're at track 0 first seek inwards. */
932 if ((fd_sense_drive_status(fdc
, &st3
) == 0) && (st3
& NE7_ST3_T0
)) {
933 /* Seek some steps... */
934 if (fd_cmd(fdc
, 3, NE7CMD_SEEK
, fdsu
, 10, 0) == 0) {
935 /* ...wait a moment... */
937 /* make ctrlr happy: */
938 fd_sense_int(fdc
, 0, 0);
942 for (i
= 0; i
< 2; i
++) {
944 * we must recalibrate twice, just in case the
945 * heads have been beyond cylinder 76, since most
946 * FDCs still barf when attempting to recalibrate
950 if (fd_cmd(fdc
, 2, NE7CMD_RECAL
, fdsu
, 0) == 0) {
951 /* a second being enough for full stroke seek*/
952 DELAY(i
== 0 ? 1000000 : 300000);
954 /* anything responding? */
955 if (fd_sense_int(fdc
, &st0
, 0) == 0 &&
956 (st0
& NE7_ST0_EC
) == 0)
957 break; /* already probed succesfully */
961 set_motor(fdc
, fdsu
, TURNOFF
);
963 if (st0
& NE7_ST0_EC
) /* no track 0 -> no drive present */
966 fd
->track
= FD_NO_TRACK
;
970 callout_init(&fd
->toffhandle
);
971 callout_init(&fd
->tohandle
);
972 callout_init(&fd
->motor
);
976 device_set_desc(dev
, "1200-KB 5.25\" drive");
979 case RTCFDT_144M
| RTCFDT_144M_PRETENDED
:
980 device_set_desc(dev
, "config-pretended 1440-MB 3.5\" drive");
984 device_set_desc(dev
, "1440-KB 3.5\" drive");
989 device_set_desc(dev
, "2880-KB 3.5\" drive (in 1440-KB mode)");
993 device_set_desc(dev
, "360-KB 5.25\" drive");
997 kprintf("720-KB 3.5\" drive");
1003 fd
->ft
= fd_types
[fd
->type
- 1];
1008 fd_attach(device_t dev
)
1012 fd
= device_get_softc(dev
);
1014 disk_create(fd
->fdu
, &fd
->disk
, &fd_ops
);
1017 * Make special raw floppy devices with preset types to
1018 * make formatting easier. These override the disk management
1019 * layer for the whole-slice-disk for partitions 128-191. Note
1020 * that we do not override partition 255, which is the
1021 * whole-slice-part. If we did we would have to provide our
1022 * own DIOCGPART ioctl.
1024 dev_ops_add(&fd_ops
,
1025 dkunitmask() | dkmakeslice(-1) | dkmakepart(128|64),
1026 dkmakeminor(fd
->fdu
, WHOLE_DISK_SLICE
, 128));
1027 make_dev(&fd_ops
, dkmakeminor(fd
->fdu
, WHOLE_DISK_SLICE
, 128 + 1),
1028 UID_ROOT
, GID_WHEEL
, 0600, "fd%d.1720", fd
->fdu
);
1029 make_dev(&fd_ops
, dkmakeminor(fd
->fdu
, WHOLE_DISK_SLICE
, 128 + 2),
1030 UID_ROOT
, GID_WHEEL
, 0600, "fd%d.1480", fd
->fdu
);
1031 make_dev(&fd_ops
, dkmakeminor(fd
->fdu
, WHOLE_DISK_SLICE
, 128 + 3),
1032 UID_ROOT
, GID_WHEEL
, 0600, "fd%d.1440", fd
->fdu
);
1033 make_dev(&fd_ops
, dkmakeminor(fd
->fdu
, WHOLE_DISK_SLICE
, 128 + 4),
1034 UID_ROOT
, GID_WHEEL
, 0600, "fd%d.1200", fd
->fdu
);
1035 make_dev(&fd_ops
, dkmakeminor(fd
->fdu
, WHOLE_DISK_SLICE
, 128 + 5),
1036 UID_ROOT
, GID_WHEEL
, 0600, "fd%d.820", fd
->fdu
);
1037 make_dev(&fd_ops
, dkmakeminor(fd
->fdu
, WHOLE_DISK_SLICE
, 128 + 6),
1038 UID_ROOT
, GID_WHEEL
, 0600, "fd%d.800", fd
->fdu
);
1039 make_dev(&fd_ops
, dkmakeminor(fd
->fdu
, WHOLE_DISK_SLICE
, 128 + 7),
1040 UID_ROOT
, GID_WHEEL
, 0600, "fd%d.720", fd
->fdu
);
1041 make_dev(&fd_ops
, dkmakeminor(fd
->fdu
, WHOLE_DISK_SLICE
, 128 + 8),
1042 UID_ROOT
, GID_WHEEL
, 0600, "fd%d.360", fd
->fdu
);
1043 make_dev(&fd_ops
, dkmakeminor(fd
->fdu
, WHOLE_DISK_SLICE
, 128 + 9),
1044 UID_ROOT
, GID_WHEEL
, 0600, "fd%d.640", fd
->fdu
);
1045 make_dev(&fd_ops
, dkmakeminor(fd
->fdu
, WHOLE_DISK_SLICE
, 128 + 10),
1046 UID_ROOT
, GID_WHEEL
, 0600, "fd%d.1232", fd
->fdu
);
1048 devstat_add_entry(&fd
->device_stats
, device_get_name(dev
),
1049 device_get_unit(dev
), 512, DEVSTAT_NO_ORDERED_TAGS
,
1050 DEVSTAT_TYPE_FLOPPY
| DEVSTAT_TYPE_IF_OTHER
,
1051 DEVSTAT_PRIORITY_FD
);
1056 fd_detach(device_t dev
)
1060 fd
= device_get_softc(dev
);
1061 dev_ops_remove(&fd_ops
,
1062 dkunitmask() | dkmakeslice(-1) | dkmakepart(128|64),
1063 dkmakeminor(fd
->fdu
, WHOLE_DISK_SLICE
, 128));
1064 disk_invalidate(&fd
->disk
);
1065 disk_destroy(&fd
->disk
);
1066 devstat_remove_entry(&fd
->device_stats
);
1067 callout_stop(&fd
->toffhandle
);
1068 callout_stop(&fd
->motor
);
1073 static device_method_t fd_methods
[] = {
1074 /* Device interface */
1075 DEVMETHOD(device_probe
, fd_probe
),
1076 DEVMETHOD(device_attach
, fd_attach
),
1077 DEVMETHOD(device_detach
, fd_detach
),
1078 DEVMETHOD(device_shutdown
, bus_generic_shutdown
),
1079 DEVMETHOD(device_suspend
, bus_generic_suspend
), /* XXX */
1080 DEVMETHOD(device_resume
, bus_generic_resume
), /* XXX */
1085 static driver_t fd_driver
= {
1088 sizeof(struct fd_data
)
1091 DRIVER_MODULE(fd
, fdc
, fd_driver
, fd_devclass
, 0, 0);
1093 /****************************************************************************/
1094 /* motor control stuff */
1095 /* remember to not deselect the drive we're working on */
1096 /****************************************************************************/
1098 set_motor(struct fdc_data
*fdc
, int fdsu
, int turnon
)
1100 int fdout
= fdc
->fdout
;
1101 int needspecify
= 0;
1104 fdout
&= ~FDO_FDSEL
;
1105 fdout
|= (FDO_MOEN0
<< fdsu
) + fdsu
;
1107 fdout
&= ~(FDO_MOEN0
<< fdsu
);
1110 && (fdout
& (FDO_MOEN0
+FDO_MOEN1
+FDO_MOEN2
+FDO_MOEN3
)) == 0)
1111 /* gonna turn off the last drive, put FDC to bed */
1112 fdout
&= ~ (FDO_FRST
|FDO_FDMAEN
);
1114 /* make sure controller is selected and specified */
1115 if((fdout
& (FDO_FRST
|FDO_FDMAEN
)) == 0)
1117 fdout
|= (FDO_FRST
|FDO_FDMAEN
);
1120 fdout_wr(fdc
, fdout
);
1122 TRACE1("[0x%x->FDOUT]", fdout
);
1127 * special case: since we have just woken up the FDC
1128 * from its sleep, we silently assume the command will
1129 * be accepted, and do not test for a timeout
1131 (void)fd_cmd(fdc
, 3, NE7CMD_SPECIFY
,
1132 NE7_SPEC_1(3, 240), NE7_SPEC_2(2, 0),
1134 if (fdc
->flags
& FDC_HAS_FIFO
)
1135 (void) enable_fifo(fdc
);
1140 fd_turnoff(void *xfd
)
1144 TRACE1("[fd%d: turnoff]", fd
->fdu
);
1148 * Don't turn off the motor yet if the drive is active.
1150 * If we got here, this could only mean we missed an interrupt.
1151 * This can e. g. happen on the Y-E Date PCMCIA floppy controller
1152 * after a controller reset. Just schedule a pseudo-interrupt
1153 * so the state machine gets re-entered.
1155 if (fd
->fdc
->state
!= DEVIDLE
&& fd
->fdc
->fdu
== fd
->fdu
) {
1161 fd
->flags
&= ~FD_MOTOR
;
1162 set_motor(fd
->fdc
, fd
->fdsu
, TURNOFF
);
1167 fd_motor_on(void *xfd
)
1172 fd
->flags
&= ~FD_MOTOR_WAIT
;
1173 if((fd
->fdc
->fd
== fd
) && (fd
->fdc
->state
== MOTORWAIT
))
1183 if(!(fd
->flags
& FD_MOTOR
))
1185 fd
->flags
|= (FD_MOTOR
+ FD_MOTOR_WAIT
);
1186 set_motor(fd
->fdc
, fd
->fdsu
, TURNON
);
1187 callout_reset(&fd
->motor
, hz
, fd_motor_on
, fd
);
1192 fdc_reset(fdc_p fdc
)
1194 /* Try a reset, keep motor on */
1195 fdout_wr(fdc
, fdc
->fdout
& ~(FDO_FRST
|FDO_FDMAEN
));
1196 TRACE1("[0x%x->FDOUT]", fdc
->fdout
& ~(FDO_FRST
|FDO_FDMAEN
));
1198 /* enable FDC, but defer interrupts a moment */
1199 fdout_wr(fdc
, fdc
->fdout
& ~FDO_FDMAEN
);
1200 TRACE1("[0x%x->FDOUT]", fdc
->fdout
& ~FDO_FDMAEN
);
1202 fdout_wr(fdc
, fdc
->fdout
);
1203 TRACE1("[0x%x->FDOUT]", fdc
->fdout
);
1205 /* XXX after a reset, silently believe the FDC will accept commands */
1206 (void)fd_cmd(fdc
, 3, NE7CMD_SPECIFY
,
1207 NE7_SPEC_1(3, 240), NE7_SPEC_2(2, 0),
1209 if (fdc
->flags
& FDC_HAS_FIFO
)
1210 (void) enable_fifo(fdc
);
1213 /****************************************************************************/
1215 /****************************************************************************/
1217 * FDC IO functions, take care of the main status register, timeout
1218 * in case the desired status bits are never set.
1220 * These PIO loops initially start out with short delays between
1221 * each iteration in the expectation that the required condition
1222 * is usually met quickly, so it can be handled immediately. After
1223 * about 1 ms, stepping is increased to achieve a better timing
1224 * accuracy in the calls to DELAY().
1227 fd_in(struct fdc_data
*fdc
, int *ptr
)
1231 for (j
= 0, step
= 1;
1232 (i
= fdsts_rd(fdc
) & (NE7_DIO
|NE7_RQM
)) != (NE7_DIO
|NE7_RQM
) &&
1236 return (fdc_err(fdc
, "ready for output in input\n"));
1241 if (j
>= FDSTS_TIMEOUT
)
1242 return (fdc_err(fdc
, bootverbose
? "input ready timeout\n": 0));
1245 TRACE1("[FDDATA->0x%x]", (unsigned char)i
);
1248 #else /* !FDC_DEBUG */
1253 #endif /* FDC_DEBUG */
1257 out_fdc(struct fdc_data
*fdc
, int x
)
1261 for (j
= 0, step
= 1;
1262 (i
= fdsts_rd(fdc
) & (NE7_DIO
|NE7_RQM
)) != NE7_RQM
&&
1265 if (i
== (NE7_DIO
|NE7_RQM
))
1266 return (fdc_err(fdc
, "ready for input in output\n"));
1271 if (j
>= FDSTS_TIMEOUT
)
1272 return (fdc_err(fdc
, bootverbose
? "output ready timeout\n": 0));
1274 /* Send the command and return */
1276 TRACE1("[0x%x->FDDATA]", x
);
1280 /****************************************************************************/
1281 /* fdopen/fdclose */
1282 /****************************************************************************/
1284 Fdopen(struct dev_open_args
*ap
)
1286 cdev_t dev
= ap
->a_head
.a_dev
;
1287 fdu_t fdu
= dkunit(dev
);
1288 struct disk_info info
;
1296 if ((fd
= devclass_get_softc(fd_devclass
, fdu
)) == 0)
1299 if ((fdc
== NULL
) || (fd
->type
== NO_TYPE
))
1303 * Figure out the type of floppy. There are special whole-disk-device
1304 * overrides that will override the current type.
1307 if (type
== WHOLE_SLICE_PART
) {
1308 type
= fd
->type
; /* do not change selected type data */
1310 } else if (type
> 128) {
1311 type
-= 128; /* set to specific format */
1314 type
= fd
->type
; /* reset to default */
1319 if (type
!= fd
->type
) {
1321 * For each type of basic drive, make sure we are trying
1322 * to open a type it can do,
1337 type
= FD_1480in5_25
;
1340 type
= FD_1440in5_25
;
1345 type
= FD_820in5_25
;
1348 type
= FD_800in5_25
;
1351 type
= FD_720in5_25
;
1354 type
= FD_640in5_25
;
1357 type
= FD_360in5_25
;
1364 if ( type
!= FD_1720
1378 * fd->type is the basic drive type, not the current format
1379 * we are reading. We only change the type when opening the
1380 * whole-slice-partition
1383 fd
->ft
= fd_types
[type
- 1];
1384 fd
->flags
|= FD_OPEN
;
1387 * Clearing the DMA overrun counter at open time is a bit messy.
1388 * Since we're only managing one counter per controller, opening
1389 * the second drive could mess it up. Anyway, if the DMA overrun
1390 * condition is really persistent, it will eventually time out
1391 * still. OTOH, clearing it here will ensure we'll at least start
1392 * trying again after a previous (maybe even long ago) failure.
1393 * Also, this is merely a stop-gap measure only that should not
1394 * happen during normal operation, so we can tolerate it to be a
1395 * bit sloppy about this.
1397 fdc
->dma_overruns
= 0;
1400 * Set disk parameters for the disk management layer.
1402 * Note that we do not set RAWEXTENSIONS here. We override
1403 * the minor numbers in the raw-extension range and handle them
1406 bzero(&info
, sizeof(info
));
1408 info
.d_media_blksize
= 128 << ft
->secsize
;
1409 info
.d_media_blocks
= ft
->size
;
1410 info
.d_dsflags
= DSO_COMPATPARTA
| DSO_COMPATMBR
;
1411 info
.d_nheads
= ft
->heads
;
1412 info
.d_secpertrack
= ft
->sectrac
;
1413 info
.d_secpercyl
= ft
->sectrac
* ft
->heads
;
1414 info
.d_ncylinders
= ft
->size
/ info
.d_secpercyl
;
1415 disk_setdiskinfo(&fd
->disk
, &info
);
1421 fdclose(struct dev_close_args
*ap
)
1423 cdev_t dev
= ap
->a_head
.a_dev
;
1424 fdu_t fdu
= dkunit(dev
);
1427 fd
= devclass_get_softc(fd_devclass
, fdu
);
1428 fd
->flags
&= ~FD_OPEN
;
1429 fd
->options
&= ~(FDOPT_NORETRY
| FDOPT_NOERRLOG
);
1434 /****************************************************************************/
1436 /****************************************************************************/
1438 fdstrategy(struct dev_strategy_args
*ap
)
1440 cdev_t dev
= ap
->a_head
.a_dev
;
1441 struct bio
*bio
= ap
->a_bio
;
1442 struct buf
*bp
= bio
->bio_buf
;
1443 unsigned nblocks
, blknum
, cando
;
1450 fd
= devclass_get_softc(fd_devclass
, fdu
);
1452 panic("fdstrategy: buf for nonexistent device (%#lx, %#lx)",
1453 (u_long
)major(dev
), (u_long
)minor(dev
));
1455 if (fd
->type
== NO_TYPE
) {
1456 bp
->b_error
= ENXIO
;
1457 bp
->b_flags
|= B_ERROR
;
1461 fdblk
= 128 << (fd
->ft
.secsize
);
1462 if (bp
->b_cmd
!= BUF_CMD_FORMAT
) {
1463 if (bio
->bio_offset
< 0) {
1465 "fd%d: fdstrat: bad request offset = %lld, bcount = %d\n",
1466 fdu
, bio
->bio_offset
, bp
->b_bcount
);
1467 bp
->b_error
= EINVAL
;
1468 bp
->b_flags
|= B_ERROR
;
1471 if ((bp
->b_bcount
% fdblk
) != 0) {
1472 bp
->b_error
= EINVAL
;
1473 bp
->b_flags
|= B_ERROR
;
1479 * Set up block calculations.
1481 if (bio
->bio_offset
> 20000000LL * fdblk
) {
1483 * Reject unreasonably high block number, prevent the
1484 * multiplication below from overflowing.
1486 bp
->b_error
= EINVAL
;
1487 bp
->b_flags
|= B_ERROR
;
1490 blknum
= (unsigned)(bio
->bio_offset
/ fdblk
);
1491 nblocks
= fd
->ft
.size
;
1493 if (blknum
+ (bp
->b_bcount
/ fdblk
) > nblocks
) {
1494 if (blknum
<= nblocks
) {
1495 cando
= (nblocks
- blknum
) * fdblk
;
1496 bp
->b_resid
= bp
->b_bcount
- cando
;
1498 goto bad
; /* not actually bad but EOF */
1500 bp
->b_error
= EINVAL
;
1501 bp
->b_flags
|= B_ERROR
;
1506 bio
->bio_driver_info
= dev
;
1507 bioqdisksort(&fdc
->bio_queue
, bio
);
1508 callout_stop(&fd
->toffhandle
);
1510 /* Tell devstat we are starting on the transaction */
1511 devstat_start_transaction(&fd
->device_stats
);
1512 device_busy(fd
->dev
);
1523 /***************************************************************\
1525 * We have just queued something.. if the controller is not busy *
1526 * then simulate the case where it has just finished a command *
1527 * So that it (the interrupt routine) looks on the queue for more*
1528 * work to do and picks up what we just added. *
1529 * If the controller is already busy, we need do nothing, as it *
1530 * will pick up our work when the present work completes *
1531 \***************************************************************/
1533 fdstart(struct fdc_data
*fdc
)
1536 if(fdc
->state
== DEVIDLE
)
1544 fd_iotimeout(void *xfdc
)
1549 TRACE1("fd%d[fd_iotimeout()]", fdc
->fdu
);
1552 * Due to IBM's brain-dead design, the FDC has a faked ready
1553 * signal, hardwired to ready == true. Thus, any command
1554 * issued if there's no diskette in the drive will _never_
1555 * complete, and must be aborted by resetting the FDC.
1556 * Many thanks, Big Blue!
1557 * The FDC must not be reset directly, since that would
1558 * interfere with the state machine. Instead, pretend that
1559 * the command completed but was invalid. The state machine
1560 * will reset the FDC and retry once.
1563 fdc
->status
[0] = NE7_ST0_IC_IV
;
1564 fdc
->flags
&= ~FDC_STAT_VALID
;
1565 fdc
->state
= IOTIMEDOUT
;
1570 /* just ensure it is running in a critical section */
1572 fd_pseudointr(void *xfdc
)
1579 /***********************************************************************\
1581 * keep calling the state machine until it returns a 0 *
1582 * ALWAYS called at SPLBIO *
1583 \***********************************************************************/
1585 fdc_intr(void *xfdc
)
1593 * magic pseudo-DMA initialization for YE FDC. Sets count and
1596 #define SET_BCDR(fdc,wr,cnt,port) \
1597 bus_space_write_1(fdc->portt, fdc->porth, fdc->port_off + port, \
1598 ((cnt)-1) & 0xff); \
1599 bus_space_write_1(fdc->portt, fdc->porth, fdc->port_off + port + 1, \
1600 ((wr ? 0x80 : 0) | ((((cnt)-1) >> 8) & 0x7f)));
1603 * fdcpio(): perform programmed IO read/write for YE PCMCIA floppy
1605 static int fdcpio(fdc_p fdc
, buf_cmd_t cmd
, caddr_t addr
, u_int count
)
1607 u_char
*cptr
= (u_char
*)addr
;
1609 if (cmd
== BUF_CMD_READ
) {
1610 if (fdc
->state
!= PIOREAD
) {
1611 fdc
->state
= PIOREAD
;
1614 SET_BCDR(fdc
, 0, count
, 0);
1615 bus_space_read_multi_1(fdc
->portt
, fdc
->porth
, fdc
->port_off
+
1616 FDC_YE_DATAPORT
, cptr
, count
);
1618 bus_space_write_multi_1(fdc
->portt
, fdc
->porth
, fdc
->port_off
+
1619 FDC_YE_DATAPORT
, cptr
, count
);
1620 SET_BCDR(fdc
, 0, count
, 0);
1625 /***********************************************************************\
1626 * The controller state machine. *
1627 * if it returns a non zero value, it should be called again immediatly *
1628 \***********************************************************************/
1632 int read
, format
, head
, i
, sec
= 0, sectrac
, st0
, cyl
, st3
;
1633 unsigned blknum
= 0, b_cylinder
= 0;
1638 struct fd_formb
*finfo
= NULL
;
1644 bio
= bioq_first(&fdc
->bio_queue
);
1646 bioq_remove(&fdc
->bio_queue
, bio
);
1651 /***********************************************\
1652 * nothing left for this controller to do *
1653 * Force into the IDLE state, *
1654 \***********************************************/
1655 fdc
->state
= DEVIDLE
;
1657 device_printf(fdc
->fdc_dev
,
1658 "unexpected valid fd pointer\n");
1662 TRACE1("[fdc%d IDLE]", fdc
->fdcu
);
1666 dev
= bio
->bio_driver_info
;
1669 fd
= devclass_get_softc(fd_devclass
, fdu
);
1670 fdblk
= 128 << fd
->ft
.secsize
;
1671 if (fdc
->fd
&& (fd
!= fdc
->fd
))
1672 device_printf(fd
->dev
, "confused fd pointers\n");
1673 read
= (bp
->b_cmd
== BUF_CMD_READ
);
1674 format
= (bp
->b_cmd
== BUF_CMD_FORMAT
);
1676 finfo
= (struct fd_formb
*)bp
->b_data
;
1677 fd
->skip
= (char *)&(finfo
->fd_formb_cylno(0))
1680 if (fdc
->state
== DOSEEK
|| fdc
->state
== SEEKCOMPLETE
) {
1681 blknum
= (unsigned)(bio
->bio_offset
/ fdblk
) +
1683 b_cylinder
= blknum
/ (fd
->ft
.sectrac
* fd
->ft
.heads
);
1685 TRACE1("fd%d", fdu
);
1686 TRACE1("[%s]", fdstates
[fdc
->state
]);
1687 TRACE1("(0x%x)", fd
->flags
);
1688 callout_reset(&fd
->toffhandle
, 4 * hz
, fd_turnoff
, fd
);
1692 case FINDWORK
: /* we have found new work */
1697 fdc
->fdctl_wr(fdc
, fd
->ft
.trans
);
1698 TRACE1("[0x%x->FDCTL]", fd
->ft
.trans
);
1699 /*******************************************************\
1700 * If the next drive has a motor startup pending, then *
1701 * it will start up in its own good time *
1702 \*******************************************************/
1703 if(fd
->flags
& FD_MOTOR_WAIT
) {
1704 fdc
->state
= MOTORWAIT
;
1705 return (0); /* come back later */
1707 /*******************************************************\
1708 * Maybe if it's not starting, it SHOULD be starting *
1709 \*******************************************************/
1710 if (!(fd
->flags
& FD_MOTOR
))
1712 fdc
->state
= MOTORWAIT
;
1716 else /* at least make sure we are selected */
1718 set_motor(fdc
, fd
->fdsu
, TURNON
);
1720 if (fdc
->flags
& FDC_NEEDS_RESET
) {
1721 fdc
->state
= RESETCTLR
;
1722 fdc
->flags
&= ~FDC_NEEDS_RESET
;
1724 fdc
->state
= DOSEEK
;
1727 if (b_cylinder
== (unsigned)fd
->track
)
1729 fdc
->state
= SEEKCOMPLETE
;
1732 if (fd_cmd(fdc
, 3, NE7CMD_SEEK
,
1733 fd
->fdsu
, b_cylinder
* fd
->ft
.steptrac
,
1737 * seek command not accepted, looks like
1738 * the FDC went off to the Saints...
1740 fdc
->retry
= 6; /* try a reset */
1741 return(retrier(fdc
));
1743 fd
->track
= FD_NO_TRACK
;
1744 fdc
->state
= SEEKWAIT
;
1745 return(0); /* will return later */
1747 /* allow heads to settle */
1748 callout_reset(&fdc
->pseudointr_ch
, hz
/ 16,
1749 fd_pseudointr
, fdc
);
1750 fdc
->state
= SEEKCOMPLETE
;
1751 return(0); /* will return later */
1752 case SEEKCOMPLETE
: /* SEEK DONE, START DMA */
1753 /* Make sure seek really happened*/
1754 if(fd
->track
== FD_NO_TRACK
) {
1755 int descyl
= b_cylinder
* fd
->ft
.steptrac
;
1758 * This might be a "ready changed" interrupt,
1759 * which cannot really happen since the
1760 * RDY pin is hardwired to + 5 volts. This
1761 * generally indicates a "bouncing" intr
1762 * line, so do one of the following:
1764 * When running on an enhanced FDC that is
1765 * known to not go stuck after responding
1766 * with INVALID, fetch all interrupt states
1767 * until seeing either an INVALID or a
1768 * real interrupt condition.
1770 * When running on a dumb old NE765, give
1771 * up immediately. The controller will
1772 * provide up to four dummy RC interrupt
1773 * conditions right after reset (for the
1774 * corresponding four drives), so this is
1775 * our only chance to get notice that it
1776 * was not the FDC that caused the interrupt.
1778 if (fd_sense_int(fdc
, &st0
, &cyl
)
1781 if(fdc
->fdct
== FDC_NE765
1782 && (st0
& NE7_ST0_IC
) == NE7_ST0_IC_RC
)
1783 return 0; /* hope for a real intr */
1784 } while ((st0
& NE7_ST0_IC
) == NE7_ST0_IC_RC
);
1789 * seek to cyl 0 requested; make sure we are
1792 if (fd_sense_drive_status(fdc
, &st3
))
1794 if ((st3
& NE7_ST3_T0
) == 0) {
1796 "fd%d: Seek to cyl 0, but not really there (ST3 = %b)\n",
1797 fdu
, st3
, NE7_ST3BITS
);
1804 return (retrier(fdc
));
1808 if (cyl
!= descyl
) {
1810 "fd%d: Seek to cyl %d failed; am at cyl %d (ST0 = 0x%x)\n",
1811 fdu
, descyl
, cyl
, st0
);
1814 return (retrier(fdc
));
1818 fd
->track
= b_cylinder
;
1819 if (!(fdc
->flags
& FDC_NODMA
)) {
1820 isa_dmastart(isa_dmabp(bp
),
1821 bp
->b_data
+fd
->skip
,
1822 format
? bp
->b_bcount
: fdblk
, fdc
->dmachan
);
1824 sectrac
= fd
->ft
.sectrac
;
1825 sec
= blknum
% (sectrac
* fd
->ft
.heads
);
1826 head
= sec
/ sectrac
;
1827 sec
= sec
% sectrac
+ 1;
1828 fd
->hddrv
= ((head
&1)<<2)+fdu
;
1832 /* make sure the drive is writable */
1833 if(fd_sense_drive_status(fdc
, &st3
) != 0)
1835 /* stuck controller? */
1836 if (!(fdc
->flags
& FDC_NODMA
))
1837 isa_dmadone(isa_dmabp(bp
),
1838 bp
->b_data
+ fd
->skip
,
1839 format
? bp
->b_bcount
: fdblk
,
1841 fdc
->retry
= 6; /* reset the beast */
1842 return (retrier(fdc
));
1844 if(st3
& NE7_ST3_WP
)
1847 * XXX YES! this is ugly.
1848 * in order to force the current operation
1849 * to fail, we will have to fake an FDC
1850 * error - all error handling is done
1853 fdc
->status
[0] = NE7_ST0_IC_AT
;
1854 fdc
->status
[1] = NE7_ST1_NW
;
1856 fdc
->status
[3] = fd
->track
;
1857 fdc
->status
[4] = head
;
1858 fdc
->status
[5] = sec
;
1859 fdc
->retry
= 8; /* break out immediately */
1860 fdc
->state
= IOTIMEDOUT
; /* not really... */
1866 if (fdc
->flags
& FDC_NODMA
) {
1868 * This seems to be necessary for
1869 * whatever obscure reason; if we omit
1870 * it, we end up filling the sector ID
1871 * fields of the newly formatted track
1872 * entirely with garbage, causing
1873 * `wrong cylinder' errors all over
1874 * the place when trying to read them
1879 SET_BCDR(fdc
, 1, bp
->b_bcount
, 0);
1881 (void)fdcpio(fdc
,bp
->b_cmd
,
1882 bp
->b_data
+fd
->skip
,
1887 if(fd_cmd(fdc
, 6, NE7CMD_FORMAT
, head
<< 2 | fdu
,
1888 finfo
->fd_formb_secshift
,
1889 finfo
->fd_formb_nsecs
,
1890 finfo
->fd_formb_gaplen
,
1891 finfo
->fd_formb_fillbyte
, 0)) {
1892 /* controller fell over */
1893 if (!(fdc
->flags
& FDC_NODMA
))
1894 isa_dmadone(isa_dmabp(bp
),
1895 bp
->b_data
+ fd
->skip
,
1896 format
? bp
->b_bcount
: fdblk
,
1899 return (retrier(fdc
));
1902 if (fdc
->flags
& FDC_NODMA
) {
1904 * this seems to be necessary even when
1907 SET_BCDR(fdc
, 1, fdblk
, 0);
1910 * perform the write pseudo-DMA before
1911 * the WRITE command is sent
1914 (void)fdcpio(fdc
,bp
->b_cmd
,
1915 bp
->b_data
+fd
->skip
,
1919 (read
? NE7CMD_READ
: NE7CMD_WRITE
),
1920 head
<< 2 | fdu
, /* head & unit */
1921 fd
->track
, /* track */
1923 sec
, /* sector + 1 */
1924 fd
->ft
.secsize
, /* sector size */
1925 sectrac
, /* sectors/track */
1926 fd
->ft
.gap
, /* gap size */
1927 fd
->ft
.datalen
, /* data length */
1929 /* the beast is sleeping again */
1930 if (!(fdc
->flags
& FDC_NODMA
))
1931 isa_dmadone(isa_dmabp(bp
),
1932 bp
->b_data
+ fd
->skip
,
1933 format
? bp
->b_bcount
: fdblk
,
1936 return (retrier(fdc
));
1939 if (fdc
->flags
& FDC_NODMA
)
1941 * if this is a read, then simply await interrupt
1942 * before performing PIO
1944 if (read
&& !fdcpio(fdc
,bp
->b_cmd
,
1945 bp
->b_data
+fd
->skip
,fdblk
)) {
1946 callout_reset(&fd
->tohandle
, hz
,
1948 return(0); /* will return later */
1952 * write (or format) operation will fall through and
1953 * await completion interrupt
1955 fdc
->state
= IOCOMPLETE
;
1956 callout_reset(&fd
->tohandle
, hz
, fd_iotimeout
, fdc
);
1957 return (0); /* will return later */
1960 * actually perform the PIO read. The IOCOMPLETE case
1961 * removes the timeout for us.
1963 (void)fdcpio(fdc
,bp
->b_cmd
,bp
->b_data
+fd
->skip
,fdblk
);
1964 fdc
->state
= IOCOMPLETE
;
1966 case IOCOMPLETE
: /* IO DONE, post-analyze */
1967 callout_stop(&fd
->tohandle
);
1969 if (fd_read_status(fdc
, fd
->fdsu
)) {
1970 if (!(fdc
->flags
& FDC_NODMA
)) {
1971 isa_dmadone(isa_dmabp(bp
),
1972 bp
->b_data
+ fd
->skip
,
1973 format
? bp
->b_bcount
: fdblk
,
1977 fdc
->retry
= 6; /* force a reset */
1978 return (retrier(fdc
));
1981 fdc
->state
= IOTIMEDOUT
;
1986 if (!(fdc
->flags
& FDC_NODMA
)) {
1987 isa_dmadone(isa_dmabp(bp
),
1988 bp
->b_data
+ fd
->skip
,
1989 format
? bp
->b_bcount
: fdblk
, fdc
->dmachan
);
1991 if (fdc
->status
[0] & NE7_ST0_IC
) {
1992 if ((fdc
->status
[0] & NE7_ST0_IC
) == NE7_ST0_IC_AT
1993 && fdc
->status
[1] & NE7_ST1_OR
) {
1995 * DMA overrun. Someone hogged the bus and
1996 * didn't release it in time for the next
1999 * We normally restart this without bumping
2000 * the retry counter. However, in case
2001 * something is seriously messed up (like
2002 * broken hardware), we rather limit the
2003 * number of retries so the IO operation
2004 * doesn't block indefinately.
2006 if (fdc
->dma_overruns
++ < FDC_DMAOV_MAX
) {
2007 fdc
->state
= SEEKCOMPLETE
;
2009 } /* else fall through */
2011 if((fdc
->status
[0] & NE7_ST0_IC
) == NE7_ST0_IC_IV
2013 fdc
->retry
= 6; /* force a reset */
2014 else if((fdc
->status
[0] & NE7_ST0_IC
) == NE7_ST0_IC_AT
2015 && fdc
->status
[2] & NE7_ST2_WC
2017 fdc
->retry
= 3; /* force recalibrate */
2018 return (retrier(fdc
));
2021 /* Operation successful, retry DMA overruns again next time. */
2022 fdc
->dma_overruns
= 0;
2024 if (!format
&& fd
->skip
< bp
->b_bcount
- bp
->b_resid
) {
2025 /* set up next transfer */
2026 fdc
->state
= DOSEEK
;
2031 device_unbusy(fd
->dev
);
2032 devstat_end_transaction_buf(&fd
->device_stats
, bp
);
2036 fdc
->state
= FINDWORK
;
2042 fdc
->state
= RESETCOMPLETE
;
2046 * Discard all the results from the reset so that they
2047 * can't cause an unexpected interrupt later.
2049 for (i
= 0; i
< 4; i
++)
2050 (void)fd_sense_int(fdc
, &st0
, &cyl
);
2051 fdc
->state
= STARTRECAL
;
2054 if(fd_cmd(fdc
, 2, NE7CMD_RECAL
, fdu
, 0)) {
2057 return (retrier(fdc
));
2059 fdc
->state
= RECALWAIT
;
2060 return (0); /* will return later */
2062 /* allow heads to settle */
2063 callout_reset(&fdc
->pseudointr_ch
, hz
/ 8, fd_pseudointr
, fdc
);
2064 fdc
->state
= RECALCOMPLETE
;
2065 return (0); /* will return later */
2069 * See SEEKCOMPLETE for a comment on this:
2071 if (fd_sense_int(fdc
, &st0
, &cyl
) == FD_NOT_VALID
)
2073 if(fdc
->fdct
== FDC_NE765
2074 && (st0
& NE7_ST0_IC
) == NE7_ST0_IC_RC
)
2075 return 0; /* hope for a real intr */
2076 } while ((st0
& NE7_ST0_IC
) == NE7_ST0_IC_RC
);
2077 if ((st0
& NE7_ST0_IC
) != NE7_ST0_IC_NT
|| cyl
!= 0)
2081 * a recalibrate from beyond cylinder 77
2082 * will "fail" due to the FDC limitations;
2083 * since people used to complain much about
2084 * the failure message, try not logging
2085 * this one if it seems to be the first
2088 kprintf("fd%d: recal failed ST0 %b cyl %d\n",
2089 fdu
, st0
, NE7_ST0BITS
, cyl
);
2090 if(fdc
->retry
< 3) fdc
->retry
= 3;
2091 return (retrier(fdc
));
2094 /* Seek (probably) necessary */
2095 fdc
->state
= DOSEEK
;
2096 return (1); /* will return immediatly */
2098 if(fd
->flags
& FD_MOTOR_WAIT
)
2100 return (0); /* time's not up yet */
2102 if (fdc
->flags
& FDC_NEEDS_RESET
) {
2103 fdc
->state
= RESETCTLR
;
2104 fdc
->flags
&= ~FDC_NEEDS_RESET
;
2107 * If all motors were off, then the controller was
2108 * reset, so it has lost track of the current
2109 * cylinder. Recalibrate to handle this case.
2110 * But first, discard the results of the reset.
2112 fdc
->state
= RESETCOMPLETE
;
2114 return (1); /* will return immediatly */
2116 device_printf(fdc
->fdc_dev
, "unexpected FD int->");
2117 if (fd_read_status(fdc
, fd
->fdsu
) == 0)
2118 kprintf("FDC status :%x %x %x %x %x %x %x ",
2127 kprintf("No status available ");
2128 if (fd_sense_int(fdc
, &st0
, &cyl
) != 0)
2130 kprintf("[controller is dead now]\n");
2133 kprintf("ST0 = %x, PCN = %x\n", st0
, cyl
);
2136 /*XXX confusing: some branches return immediately, others end up here*/
2137 return (1); /* Come back immediatly to new state */
2141 retrier(struct fdc_data
*fdc
)
2151 dev
= bio
->bio_driver_info
;
2153 /* XXX shouldn't this be cached somewhere? */
2155 fd
= devclass_get_softc(fd_devclass
, fdu
);
2156 if (fd
->options
& FDOPT_NORETRY
)
2159 switch (fdc
->retry
) {
2160 case 0: case 1: case 2:
2161 fdc
->state
= SEEKCOMPLETE
;
2163 case 3: case 4: case 5:
2164 fdc
->state
= STARTRECAL
;
2167 fdc
->state
= RESETCTLR
;
2174 int printerror
= (fd
->options
& FDOPT_NOERRLOG
) == 0;
2178 * note: use the correct device for more
2179 * verbose error reporting.
2182 "hard error", LOG_PRINTF
,
2186 if (fdc
->flags
& FDC_STAT_VALID
)
2188 " (ST0 %b ST1 %b ST2 %b cyl %u hd %u sec %u)\n",
2189 fdc
->status
[0], NE7_ST0BITS
,
2190 fdc
->status
[1], NE7_ST1BITS
,
2191 fdc
->status
[2], NE7_ST2BITS
,
2192 fdc
->status
[3], fdc
->status
[4],
2195 kprintf(" (No status)\n");
2198 bp
->b_flags
|= B_ERROR
;
2200 bp
->b_resid
+= bp
->b_bcount
- fdc
->fd
->skip
;
2203 device_unbusy(fd
->dev
);
2204 devstat_end_transaction_buf(&fdc
->fd
->device_stats
, bp
);
2206 fdc
->state
= FINDWORK
;
2207 fdc
->flags
|= FDC_NEEDS_RESET
;
2217 fdformat_wakeup(struct bio
*bio
)
2219 bio
->bio_buf
->b_cmd
= BUF_CMD_DONE
;
2224 fdformat(cdev_t dev
, struct fd_formb
*finfo
, struct ucred
*cred
)
2233 fd
= devclass_get_softc(fd_devclass
, fdu
);
2234 fdblk
= 128 << fd
->ft
.secsize
;
2236 /* set up a buffer header for fdstrategy() */
2238 bp
->b_cmd
= BUF_CMD_FORMAT
;
2241 * calculate a fake blkno, so fdstrategy() would initiate a
2242 * seek to the requested cylinder
2244 bp
->b_bio1
.bio_offset
= (off_t
)(finfo
->cyl
*
2245 (fd
->ft
.sectrac
* fd
->ft
.heads
)
2246 + finfo
->head
* fd
->ft
.sectrac
) * fdblk
;
2247 bp
->b_bio1
.bio_driver_info
= dev
;
2248 bp
->b_bio1
.bio_done
= fdformat_wakeup
;
2250 bp
->b_bcount
= sizeof(struct fd_idfield_data
) * finfo
->fd_formb_nsecs
;
2251 bp
->b_data
= (caddr_t
)finfo
;
2253 /* now do the format */
2254 dev_dstrategy(dev
, &bp
->b_bio1
);
2256 /* ...and wait for it to complete */
2258 while (bp
->b_cmd
!= BUF_CMD_DONE
) {
2259 rv
= tsleep(&bp
->b_bio1
, 0, "fdform", 20 * hz
);
2260 if (rv
== EWOULDBLOCK
)
2265 if (rv
== EWOULDBLOCK
) {
2268 device_unbusy(fd
->dev
);
2269 biodone(&bp
->b_bio1
);
2271 if (bp
->b_flags
& B_ERROR
)
2274 * allow the process to be swapped
2281 * TODO: don't allocate buffer on stack.
2285 fdioctl(struct dev_ioctl_args
*ap
)
2287 cdev_t dev
= ap
->a_head
.a_dev
;
2288 fdu_t fdu
= dkunit(dev
);
2289 fd_p fd
= devclass_get_softc(fd_devclass
, fdu
);
2290 struct fdc_status
*fsp
;
2293 switch (ap
->a_cmd
) {
2295 if ((ap
->a_fflag
& FWRITE
) == 0)
2296 error
= EBADF
; /* must be opened for writing */
2297 else if (((struct fd_formb
*)ap
->a_data
)->format_version
!=
2299 error
= EINVAL
; /* wrong version of formatting prog */
2301 error
= fdformat(dev
, (struct fd_formb
*)ap
->a_data
, ap
->a_cred
);
2304 case FD_GTYPE
: /* get drive type */
2305 *(struct fd_type
*)ap
->a_data
= fd
->ft
;
2308 case FD_STYPE
: /* set drive type */
2309 /* this is considered harmful; only allow for superuser */
2310 if (suser_cred(ap
->a_cred
, 0) != 0)
2312 fd
->ft
= *(struct fd_type
*)ap
->a_data
;
2315 case FD_GOPTS
: /* get drive options */
2316 *(int *)ap
->a_data
= fd
->options
;
2319 case FD_SOPTS
: /* set drive options */
2320 fd
->options
= *(int *)ap
->a_data
;
2324 fsp
= (struct fdc_status
*)ap
->a_data
;
2325 if ((fd
->fdc
->flags
& FDC_STAT_VALID
) == 0)
2327 memcpy(fsp
->status
, fd
->fdc
->status
, 7 * sizeof(u_int
));
2338 * Hello emacs, these are the
2341 * c-continued-statement-offset: 8
2342 * c-continued-brace-offset: 0
2343 * c-brace-offset: -8
2344 * c-brace-imaginary-offset: 0
2345 * c-argdecl-indent: 8
2346 * c-label-offset: -8
2347 * c++-hanging-braces: 1
2348 * c++-access-specifier-offset: -8
2349 * c++-empty-arglist-indent: 8
2350 * c++-friend-offset: 0