1 /* $DragonFly: src/sys/dev/usbmisc/ugensa/ugensa.c,v 1.6 2008/08/19 11:28:48 matthias Exp $ */
2 /* $OpenBSD: umsm.c,v 1.15 2007/06/14 10:11:16 mbalmer Exp $ */
5 * Copyright (c) 2006 Jonathan Gray <jsg@openbsd.org>
7 * Permission to use, copy, modify, and distribute this software for any
8 * purpose with or without fee is hereby granted, provided that the above
9 * copyright notice and this permission notice appear in all copies.
11 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
12 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
13 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
14 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
15 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
16 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
17 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
21 * Generic USB serial driver used for devices where hardware specific
22 * don't apply or doesn't make sense (for example Qualcomm MSM EVDO, UMTS
23 * and other similar communication devices).
26 #include <sys/param.h>
27 #include <sys/systm.h>
28 #include <sys/kernel.h>
29 #include <sys/device.h>
32 #include <sys/types.h>
34 #include <sys/module.h>
36 #include <bus/usb/usb.h>
37 #include <bus/usb/usbdi.h>
38 #include <bus/usb/usbdi_util.h>
39 #include <bus/usb/usbcdc.h>
40 #include <dev/usbmisc/ucom/ucomvar.h>
43 static int ugensadebug
= 1;
44 #define DPRINTFN(n, x) do { if (ugensadebug > (n)) kprintf x; } while (0)
46 #define DPRINTFN(n, x)
48 #define DPRINTF(x) DPRINTFN(0, x)
50 #define UGENSABUFSZ 4096
51 #define UGENSA_INTR_INTERVAL 100 /* ms */
54 struct ucom_softc sc_ucom
;
59 usbd_pipe_handle sc_intr_pipe
;
63 u_char sc_lsr
; /* Local status register */
64 u_char sc_msr
; /* Status register */
65 u_char sc_dtr
; /* Current DTR state */
66 u_char sc_rts
; /* Current RTS state */
69 static device_probe_t ugensa_match
;
70 static device_attach_t ugensa_attach
;
71 static device_detach_t ugensa_detach
;
73 int ugensa_open(void *, int);
74 void ugensa_close(void *, int);
75 void ugensa_intr(usbd_xfer_handle
, usbd_private_handle
, usbd_status
);
76 void ugensa_get_status(void *, int, u_char
*, u_char
*);
77 void ugensa_set(void *, int, int, int);
79 static device_method_t ugensa_methods
[] = {
80 /* Device interface */
81 DEVMETHOD(device_probe
, ugensa_match
),
82 DEVMETHOD(device_attach
, ugensa_attach
),
83 DEVMETHOD(device_detach
, ugensa_detach
),
87 static driver_t ugensa_driver
= {
90 sizeof (struct ugensa_softc
)
93 struct ucom_callback ugensa_callback
= {
104 static const struct usb_devno ugensa_devs
[] = {
105 { USB_DEVICE(0x05c6, 0x6000) }, /* Qualcomm HSDPA MSM */
106 { USB_DEVICE(0x05c6, 0x6613) }, /* Qualcomm HSDPA MSM */
107 { USB_DEVICE(0x0c88, 0x17da) }, /* Kyocera KPC650 */
108 { USB_DEVICE(0x0f3d, 0x0112) }, /* AirPrime PC5220 */
109 { USB_DEVICE(0x1199, 0x0017) }, /* Sierra Wireless EM5625 */
110 { USB_DEVICE(0x1199, 0x0018) }, /* Sierra Wireless MC5720 */
111 { USB_DEVICE(0x1199, 0x0019) }, /* Sierra Wireless AirCard 595 */
112 { USB_DEVICE(0x1199, 0x0020) }, /* Sierra Wireless MC5725 */
113 { USB_DEVICE(0x1199, 0x0021) }, /* Sierra Wireless AirCard 597E */
114 { USB_DEVICE(0x1199, 0x0112) }, /* Sierra Wireless AirCard 580 */
115 { USB_DEVICE(0x1199, 0x0120) }, /* Sierra Wireless AirCard 595U */
116 { USB_DEVICE(0x1199, 0x0218) }, /* Sierra Wireless MC5720 */
117 { USB_DEVICE(0x1199, 0x0220) }, /* Sierra Wireless MC5725 */
118 { USB_DEVICE(0x1199, 0x6802) }, /* Sierra Wireless MC8755 */
119 { USB_DEVICE(0x1199, 0x6803) }, /* Sierra Wireless MC8765 */
120 { USB_DEVICE(0x1199, 0x6804) }, /* Sierra Wireless MC8755 */
121 { USB_DEVICE(0x1199, 0x6812) }, /* Sierra Wireless MC8775 */
122 { USB_DEVICE(0x1199, 0x6813) }, /* Sierra Wireless MC8755 */
123 { USB_DEVICE(0x1199, 0x6820) }, /* Sierra Wireless AirCard 875 */
124 { USB_DEVICE(0x1199, 0x6832) }, /* Sierra Wireless MC8780 */
125 { USB_DEVICE(0x1199, 0x6833) }, /* Sierra Wireless MC8781 */
126 { USB_DEVICE(0x1199, 0x6850) }, /* Sierra Wireless AirCard 880 */
127 { USB_DEVICE(0x1199, 0x6851) }, /* Sierra Wireless AirCard 881 */
128 { USB_DEVICE(0x1199, 0x6852) }, /* Sierra Wireless AirCard 880E */
129 { USB_DEVICE(0x1199, 0x6853) }, /* Sierra Wireless AirCard 881E */
130 { USB_DEVICE(0x1199, 0x6855) }, /* Sierra Wireless AirCard 880U */
131 { USB_DEVICE(0x1199, 0x6856) }, /* Sierra Wireless AirCard 881U */
132 { USB_DEVICE(0x12d1, 0x1001) }, /* Huawei Mobile Connect */
133 { USB_DEVICE(0x12d1, 0x1003) }, /* Huawei Mobile E220 */
134 { USB_DEVICE(0x12d1, 0x1004) }, /* Huawei Mobile E220 */
135 { USB_DEVICE(0x1410, 0x1100) }, /* Novatel Wireless Merlin XS620/S640 */
136 { USB_DEVICE(0x1410, 0x1110) }, /* Novatel Wireless Merlin S620/V620 */
137 { USB_DEVICE(0x1410, 0x1120) }, /* Novatel Wireless Merlin EX720 */
138 { USB_DEVICE(0x1410, 0x1130) }, /* Novatel Wireless Merlin S720 */
139 { USB_DEVICE(0x1410, 0x1400) }, /* Novatel Wireless Merlin U730 */
140 { USB_DEVICE(0x1410, 0x1410) }, /* Novatel Wireless Merlin U740 */
141 { USB_DEVICE(0x1410, 0x1420) }, /* Novatel Wireless Expedite EU870D */
142 { USB_DEVICE(0x1410, 0x1430) }, /* Novatel Wireless Merlin XU870 */
143 { USB_DEVICE(0x1410, 0x2100) }, /* Novatel Wireless Expedite EV620 */
144 { USB_DEVICE(0x1410, 0x2110) }, /* Novatel Wireless Merlin ES620,
145 Merlin ES720, Ovation U720 */
146 { USB_DEVICE(0x1410, 0x2130) }, /* Novatel Wireless Merlin ES620 */
147 { USB_DEVICE(0x1410, 0x2410) }, /* Novatel Wireless Expedite EU740 */
148 { USB_DEVICE(0x1410, 0x4100) }, /* Novatel Wireless Ovation MC727 */
149 { USB_DEVICE(0x1410, 0x4400) }, /* Novatel Wireless Ovation MC950D */
150 { USB_DEVICE(0x16d5, 0x6501) }, /* AnyDATA ADU-E100A/D/H */
151 { USB_DEVICE(0x413c, 0x8114) }, /* Dell Wireless 5700 */
152 { USB_DEVICE(0x413c, 0x8115) }, /* Dell Wireless 5500 */
153 { USB_DEVICE(0x413c, 0x8116) }, /* Dell Wireless 5505 */
154 { USB_DEVICE(0x413c, 0x8117) }, /* Dell Wireless 5700 */
155 { USB_DEVICE(0x413c, 0x8118) }, /* Dell Wireless 5510 */
156 { USB_DEVICE(0x413c, 0x8128) }, /* Dell Wireless 5700 */
157 { USB_DEVICE(0x413c, 0x8136) }, /* Dell Wireless 5520 */
158 { USB_DEVICE(0x413c, 0x8137) }, /* Dell Wireless 5520 */
161 DRIVER_MODULE(ugensa
, uhub
, ugensa_driver
, ucom_devclass
, usbd_driver_load
, 0);
162 MODULE_DEPEND(ugensa
, usb
, 1, 1, 1);
163 MODULE_DEPEND(ugensa
, ucom
, UCOM_MINVER
, UCOM_PREFVER
, UCOM_MAXVER
);
164 MODULE_VERSION(ugensa
, 1);
167 ugensa_match(device_t self
)
169 struct usb_attach_arg
*uaa
= device_get_ivars(self
);
171 if (uaa
->iface
== NULL
)
174 return (usb_lookup(ugensa_devs
, uaa
->vendor
, uaa
->product
) != NULL
) ?
175 UMATCH_VENDOR_IFACESUBCLASS
: UMATCH_NONE
;
179 ugensa_attach(device_t self
)
181 struct ugensa_softc
*sc
= device_get_softc(self
);
182 struct usb_attach_arg
*uaa
= device_get_ivars(self
);
183 struct ucom_softc
*ucom
;
184 usb_interface_descriptor_t
*id
;
185 usb_endpoint_descriptor_t
*ed
;
189 bzero(sc
, sizeof (struct ugensa_softc
));
192 ucom
->sc_udev
= uaa
->device
;
193 ucom
->sc_iface
= uaa
->iface
;
195 id
= usbd_get_interface_descriptor(ucom
->sc_iface
);
197 sc
->sc_iface_no
= id
->bInterfaceNumber
;
198 ucom
->sc_bulkin_no
= ucom
->sc_bulkout_no
= -1;
199 for (i
= 0; i
< id
->bNumEndpoints
; i
++) {
200 ed
= usbd_interface2endpoint_descriptor(ucom
->sc_iface
, i
);
202 device_printf(ucom
->sc_dev
, "no endpoint descriptor "
203 "found for %d\n", i
);
207 if (UE_GET_DIR(ed
->bEndpointAddress
) == UE_DIR_IN
&&
208 UE_GET_XFERTYPE(ed
->bmAttributes
) == UE_INTERRUPT
) {
209 sc
->sc_intr_number
= ed
->bEndpointAddress
;
210 sc
->sc_isize
= UGETW(ed
->wMaxPacketSize
);
211 } else if (UE_GET_DIR(ed
->bEndpointAddress
) == UE_DIR_IN
&&
212 UE_GET_XFERTYPE(ed
->bmAttributes
) == UE_BULK
)
213 ucom
->sc_bulkin_no
= ed
->bEndpointAddress
;
214 else if (UE_GET_DIR(ed
->bEndpointAddress
) == UE_DIR_OUT
&&
215 UE_GET_XFERTYPE(ed
->bmAttributes
) == UE_BULK
)
216 ucom
->sc_bulkout_no
= ed
->bEndpointAddress
;
218 if (ucom
->sc_bulkin_no
== -1 || ucom
->sc_bulkout_no
== -1) {
219 device_printf(ucom
->sc_dev
, "missing endpoint\n");
223 sc
->sc_dtr
= sc
->sc_rts
= -1;
225 ucom
->sc_parent
= sc
;
226 ucom
->sc_portno
= UCOM_UNK_PORTNO
;
227 ucom
->sc_ibufsize
= UGENSABUFSZ
;
228 ucom
->sc_obufsize
= UGENSABUFSZ
;
229 ucom
->sc_ibufsizepad
= UGENSABUFSZ
;
230 ucom
->sc_opkthdrlen
= 0;
231 ucom
->sc_callback
= &ugensa_callback
;
233 usbd_add_drv_event(USB_EVENT_DRIVER_ATTACH
, ucom
->sc_udev
,
236 DPRINTF(("%s: in = 0x%x, out = 0x%x\n",
237 device_get_nameunit(ucom
->sc_dev
), ucom
->sc_bulkin_no
,
238 ucom
->sc_bulkout_no
));
240 ucom_attach(&sc
->sc_ucom
);
250 ugensa_detach(device_t self
)
252 struct ugensa_softc
*sc
= device_get_softc(self
);
255 /* close the interrupt endpoint if that is opened */
256 if (sc
->sc_intr_pipe
!= NULL
) {
257 usbd_abort_pipe(sc
->sc_intr_pipe
);
258 usbd_close_pipe(sc
->sc_intr_pipe
);
259 kfree(sc
->sc_intr_buf
, M_USBDEV
);
260 sc
->sc_intr_pipe
= NULL
;
263 DPRINTF(("ugensa_detach: sc=%p\n", sc
));
264 sc
->sc_ucom
.sc_dying
= 1;
265 rv
= ucom_detach(&sc
->sc_ucom
);
266 usbd_add_drv_event(USB_EVENT_DRIVER_DETACH
, sc
->sc_ucom
.sc_udev
,
274 ugensa_activate(struct device
*self
, enum devact act
)
276 struct ugensa_softc
*sc
= (struct ugensa_softc
*)self
;
283 case DVACT_DEACTIVATE
:
284 if (sc
->sc_subdev
!= NULL
)
285 rv
= config_deactivate(sc
->sc_subdev
);
294 ugensa_open(void *addr
, int portno
)
296 struct ugensa_softc
*sc
= addr
;
299 if (sc
->sc_ucom
.sc_dying
)
302 if (sc
->sc_intr_number
!= -1 && sc
->sc_intr_pipe
== NULL
) {
303 sc
->sc_intr_buf
= kmalloc(sc
->sc_isize
, M_USBDEV
, M_WAITOK
);
304 err
= usbd_open_pipe_intr(sc
->sc_ucom
.sc_iface
,
305 sc
->sc_intr_number
, USBD_SHORT_XFER_OK
, &sc
->sc_intr_pipe
,
306 sc
, sc
->sc_intr_buf
, sc
->sc_isize
, ugensa_intr
,
307 UGENSA_INTR_INTERVAL
);
309 device_printf(sc
->sc_ucom
.sc_dev
,
310 "cannot open interrupt pipe (addr %d)\n",
320 ugensa_close(void *addr
, int portno
)
322 struct ugensa_softc
*sc
= addr
;
325 if (sc
->sc_ucom
.sc_dying
)
328 if (sc
->sc_intr_pipe
!= NULL
) {
329 err
= usbd_abort_pipe(sc
->sc_intr_pipe
);
331 device_printf(sc
->sc_ucom
.sc_dev
,
332 "abort interrupt pipe failed: %s\n",
334 err
= usbd_close_pipe(sc
->sc_intr_pipe
);
336 device_printf(sc
->sc_ucom
.sc_dev
,
337 "close interrupt pipe failed: %s\n",
339 kfree(sc
->sc_intr_buf
, M_USBDEV
);
340 sc
->sc_intr_pipe
= NULL
;
346 ugensa_intr(usbd_xfer_handle xfer
, usbd_private_handle priv
, usbd_status status
)
348 struct ugensa_softc
*sc
= priv
;
349 usb_cdc_notification_t
*buf
;
352 buf
= (usb_cdc_notification_t
*)sc
->sc_intr_buf
;
353 if (sc
->sc_ucom
.sc_dying
)
356 if (status
!= USBD_NORMAL_COMPLETION
) {
357 if (status
== USBD_NOT_STARTED
|| status
== USBD_CANCELLED
)
360 device_printf(sc
->sc_ucom
.sc_dev
,
361 "ugensa_intr: abnormal status: %s\n", usbd_errstr(status
));
362 usbd_clear_endpoint_stall_async(sc
->sc_intr_pipe
);
366 if (buf
->bmRequestType
!= UCDC_NOTIFICATION
) {
367 DPRINTF(("%s: umsm_intr: unknown message type(0x%02x)\n",
368 sc
->sc_dev
.dv_xname
, buf
->bmRequestType
));
372 if (buf
->bNotification
== UCDC_N_SERIAL_STATE
) {
373 /* invalid message length, discard it */
374 if (UGETW(buf
->wLength
) != 2)
376 /* XXX: sc_lsr is always 0 */
377 sc
->sc_lsr
= sc
->sc_msr
= 0;
378 mstatus
= buf
->data
[0];
379 if (ISSET(mstatus
, UCDC_N_SERIAL_RI
))
380 sc
->sc_msr
|= UMSR_RI
;
381 if (ISSET(mstatus
, UCDC_N_SERIAL_DSR
))
382 sc
->sc_msr
|= UMSR_DSR
;
383 if (ISSET(mstatus
, UCDC_N_SERIAL_DCD
))
384 sc
->sc_msr
|= UMSR_DCD
;
385 } else if (buf
->bNotification
!= UCDC_N_CONNECTION_SPEED_CHANGE
) {
386 DPRINTF(("%s: umsm_intr: unknown notify message (0x%02x)\n",
387 sc
->sc_dev
.dv_xname
, buf
->bNotification
));
391 ucom_status_change(&sc
->sc_ucom
);
395 ugensa_get_status(void *addr
, int portno
, u_char
*lsr
, u_char
*msr
)
397 struct ugensa_softc
*sc
= addr
;
406 ugensa_set(void *addr
, int portno
, int reg
, int onoff
)
408 struct ugensa_softc
*sc
= addr
;
409 usb_device_request_t req
;
414 if (sc
->sc_dtr
== onoff
)
419 if (sc
->sc_rts
== onoff
)
427 /* build an usb request */
428 ls
= (sc
->sc_dtr
? UCDC_LINE_DTR
: 0) |
429 (sc
->sc_rts
? UCDC_LINE_RTS
: 0);
430 req
.bmRequestType
= UT_WRITE_CLASS_INTERFACE
;
431 req
.bRequest
= UCDC_SET_CONTROL_LINE_STATE
;
432 USETW(req
.wValue
, ls
);
433 USETW(req
.wIndex
, sc
->sc_iface_no
);
434 USETW(req
.wLength
, 0);
436 (void)usbd_do_request(sc
->sc_ucom
.sc_udev
, &req
, 0);