2 * Data structures and definitions for CAM Control Blocks (CCBs).
4 * Copyright (c) 1997, 1998 Justin T. Gibbs.
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions
10 * 1. Redistributions of source code must retain the above copyright
11 * notice, this list of conditions, and the following disclaimer,
12 * without modification, immediately at the beginning of the file.
13 * 2. The name of the author may not be used to endorse or promote products
14 * derived from this software without specific prior written permission.
16 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
17 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
18 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
19 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
20 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
21 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
22 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
23 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
24 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
25 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
28 * $FreeBSD: src/sys/cam/cam_ccb.h,v 1.15.2.3 2003/07/29 04:00:34 njl Exp $
29 * $DragonFly: src/sys/bus/cam/cam_ccb.h,v 1.17 2008/02/10 00:01:01 pavalos Exp $
32 #ifndef _CAM_CAM_CCB_H
33 #define _CAM_CAM_CCB_H 1
35 #include <sys/queue.h>
36 #include <sys/cdefs.h>
38 #include <machine/limits.h>
39 #include <sys/callout.h>
40 #include "cam_debug.h"
41 #include "scsi/scsi_all.h"
44 /* General allocation length definitions for CCB structures */
45 #define IOCDBLEN CAM_MAX_CDBLEN /* Space for CDB bytes/pointer */
46 #define VUHBALEN 14 /* Vendor Unique HBA length */
47 #define SIM_IDLEN 16 /* ASCII string len for SIM ID */
48 #define HBA_IDLEN 16 /* ASCII string len for HBA ID */
49 #define DEV_IDLEN 16 /* ASCII string len for device names */
50 #define CCB_PERIPH_PRIV_SIZE 2 /* size of peripheral private area */
51 #define CCB_SIM_PRIV_SIZE 2 /* size of sim private area */
53 /* Struct definitions for CAM control blocks */
55 /* Common CCB header */
58 CAM_CDB_POINTER
= 0x00000001,/* The CDB field is a pointer */
59 CAM_QUEUE_ENABLE
= 0x00000002,/* SIM queue actions are enabled */
60 CAM_CDB_LINKED
= 0x00000004,/* CCB contains a linked CDB */
61 CAM_NEGOTIATE
= 0x00000008,/*
62 * Perform transport negotiation
65 CAM_SCATTER_VALID
= 0x00000010,/* Scatter/gather list is valid */
66 CAM_DIS_AUTOSENSE
= 0x00000020,/* Disable autosense feature */
67 CAM_DIR_RESV
= 0x00000000,/* Data direction (00:reserved) */
68 CAM_DIR_IN
= 0x00000040,/* Data direction (01:DATA IN) */
69 CAM_DIR_OUT
= 0x00000080,/* Data direction (10:DATA OUT) */
70 CAM_DIR_NONE
= 0x000000C0,/* Data direction (11:no data) */
71 CAM_DIR_MASK
= 0x000000C0,/* Data direction Mask */
72 CAM_SOFT_RST_OP
= 0x00000100,/* Use Soft reset alternative */
73 CAM_ENG_SYNC
= 0x00000200,/* Flush resid bytes on complete */
74 CAM_DEV_QFRZDIS
= 0x00000400,/* Disable DEV Q freezing */
75 CAM_DEV_QFREEZE
= 0x00000800,/* Freeze DEV Q on execution */
76 CAM_HIGH_POWER
= 0x00001000,/* Command takes a lot of power */
77 CAM_SENSE_PTR
= 0x00002000,/* Sense data is a pointer */
78 CAM_SENSE_PHYS
= 0x00004000,/* Sense pointer is physical addr*/
79 CAM_TAG_ACTION_VALID
= 0x00008000,/* Use the tag action in this ccb*/
80 CAM_PASS_ERR_RECOVER
= 0x00010000,/* Pass driver does err. recovery*/
81 CAM_DIS_DISCONNECT
= 0x00020000,/* Disable disconnect */
82 CAM_SG_LIST_PHYS
= 0x00040000,/* SG list has physical addrs. */
83 CAM_MSG_BUF_PHYS
= 0x00080000,/* Message buffer ptr is physical*/
84 CAM_SNS_BUF_PHYS
= 0x00100000,/* Autosense data ptr is physical*/
85 CAM_DATA_PHYS
= 0x00200000,/* SG/Buffer data ptrs are phys. */
86 CAM_CDB_PHYS
= 0x00400000,/* CDB poiner is physical */
87 CAM_ENG_SGLIST
= 0x00800000,/* SG list is for the HBA engine */
89 /* Phase cognizant mode flags */
90 CAM_DIS_AUTOSRP
= 0x01000000,/* Disable autosave/restore ptrs */
91 CAM_DIS_AUTODISC
= 0x02000000,/* Disable auto disconnect */
92 CAM_TGT_CCB_AVAIL
= 0x04000000,/* Target CCB available */
93 CAM_TGT_PHASE_MODE
= 0x08000000,/* The SIM runs in phase mode */
94 CAM_MSGB_VALID
= 0x10000000,/* Message buffer valid */
95 CAM_STATUS_VALID
= 0x20000000,/* Status buffer valid */
96 CAM_DATAB_VALID
= 0x40000000,/* Data buffer valid */
98 /* Host target Mode flags */
99 CAM_SEND_SENSE
= 0x08000000,/* Send sense data with status */
100 CAM_TERM_IO
= 0x10000000,/* Terminate I/O Message sup. */
101 CAM_DISCONNECT
= 0x20000000,/* Disconnects are mandatory */
102 CAM_SEND_STATUS
= 0x40000000 /* Send status after data phase */
105 /* XPT Opcodes for xpt_action */
107 /* Function code flags are bits greater than 0xff */
108 XPT_FC_QUEUED
= 0x100,
109 /* Non-immediate function code */
110 XPT_FC_USER_CCB
= 0x200,
111 XPT_FC_XPT_ONLY
= 0x400,
112 /* Only for the transport layer device */
113 XPT_FC_DEV_QUEUED
= 0x800 | XPT_FC_QUEUED
,
114 /* Passes through the device queues */
115 /* Common function commands: 0x00->0x0F */
117 /* Execute Nothing */
118 XPT_SCSI_IO
= 0x01 | XPT_FC_DEV_QUEUED
,
119 /* Execute the requested I/O operation */
120 XPT_GDEV_TYPE
= 0x02,
121 /* Get type information for specified device */
123 /* Get a list of peripheral devices */
125 /* Path routing inquiry */
127 /* Release a frozen SIM queue */
128 XPT_SASYNC_CB
= 0x06,
129 /* Set Asynchronous Callback Parameters */
130 XPT_SDEV_TYPE
= 0x07,
131 /* Set device type information */
132 XPT_SCAN_BUS
= 0x08 | XPT_FC_QUEUED
| XPT_FC_USER_CCB
134 /* (Re)Scan the SCSI Bus */
135 XPT_DEV_MATCH
= 0x09 | XPT_FC_XPT_ONLY
,
136 /* Get EDT entries matching the given pattern */
138 /* Turn on debugging for a bus, target or lun */
139 XPT_PATH_STATS
= 0x0b,
140 /* Path statistics (error counts, etc.) */
141 XPT_GDEV_STATS
= 0x0c,
142 /* Device statistics (error counts, etc.) */
143 /* SCSI Control Functions: 0x10->0x1F */
145 /* Abort the specified CCB */
146 XPT_RESET_BUS
= 0x11 | XPT_FC_XPT_ONLY
,
147 /* Reset the specified SCSI bus */
148 XPT_RESET_DEV
= 0x12 | XPT_FC_DEV_QUEUED
,
149 /* Bus Device Reset the specified SCSI device */
151 /* Terminate the I/O process */
152 XPT_SCAN_LUN
= 0x14 | XPT_FC_QUEUED
| XPT_FC_USER_CCB
154 /* Scan Logical Unit */
155 XPT_GET_TRAN_SETTINGS
= 0x15,
157 * Get default/user transfer settings
160 XPT_SET_TRAN_SETTINGS
= 0x16,
162 * Set transfer rate/width
163 * negotiation settings
165 XPT_CALC_GEOMETRY
= 0x17,
167 * Calculate the geometry parameters for
168 * a device give the sector size and
172 /* HBA engine commands 0x20->0x2F */
173 XPT_ENG_INQ
= 0x20 | XPT_FC_XPT_ONLY
,
174 /* HBA engine feature inquiry */
175 XPT_ENG_EXEC
= 0x21 | XPT_FC_DEV_QUEUED
,
176 /* HBA execute engine request */
178 /* Target mode commands: 0x30->0x3F */
180 /* Enable LUN as a target */
181 XPT_TARGET_IO
= 0x31 | XPT_FC_DEV_QUEUED
,
182 /* Execute target I/O request */
183 XPT_ACCEPT_TARGET_IO
= 0x32 | XPT_FC_QUEUED
| XPT_FC_USER_CCB
,
184 /* Accept Host Target Mode CDB */
185 XPT_CONT_TARGET_IO
= 0x33 | XPT_FC_DEV_QUEUED
,
186 /* Continue Host Target I/O Connection */
187 XPT_IMMED_NOTIFY
= 0x34 | XPT_FC_QUEUED
| XPT_FC_USER_CCB
,
188 /* Notify Host Target driver of event */
189 XPT_NOTIFY_ACK
= 0x35,
190 /* Acknowledgement of event */
192 /* Vendor Unique codes: 0x80->0x8F */
196 #define XPT_FC_GROUP_MASK 0xF0
197 #define XPT_FC_GROUP(op) ((op) & XPT_FC_GROUP_MASK)
198 #define XPT_FC_GROUP_COMMON 0x00
199 #define XPT_FC_GROUP_SCSI_CONTROL 0x10
200 #define XPT_FC_GROUP_HBA_ENGINE 0x20
201 #define XPT_FC_GROUP_TMODE 0x30
202 #define XPT_FC_GROUP_VENDOR_UNIQUE 0x80
204 #define XPT_FC_IS_DEV_QUEUED(ccb) \
205 (((ccb)->ccb_h.func_code & XPT_FC_DEV_QUEUED) == XPT_FC_DEV_QUEUED)
206 #define XPT_FC_IS_QUEUED(ccb) \
207 (((ccb)->ccb_h.func_code & XPT_FC_QUEUED) != 0)
212 PROTO_SCSI
, /* Small Computer System Interface */
213 PROTO_ATA
, /* AT Attachment */
214 PROTO_ATAPI
, /* AT Attachment Packetized Interface */
220 XPORT_SPI
, /* SCSI Parallel Interface */
221 XPORT_FC
, /* Fiber Channel */
222 XPORT_SSA
, /* Serial Storage Architecture */
223 XPORT_USB
, /* Universal Serial Bus */
224 XPORT_PPB
, /* Parallel Port Bus */
225 XPORT_ATA
, /* AT Attachment */
226 XPORT_SAS
, /* Serial Attached SCSI */
229 #define PROTO_VERSION_UNKNOWN (UINT_MAX - 1)
230 #define PROTO_VERSION_UNSPECIFIED UINT_MAX
231 #define XPORT_VERSION_UNKNOWN (UINT_MAX - 1)
232 #define XPORT_VERSION_UNSPECIFIED UINT_MAX
235 LIST_ENTRY(ccb_hdr
) le
;
236 SLIST_ENTRY(ccb_hdr
) sle
;
237 TAILQ_ENTRY(ccb_hdr
) tqe
;
238 STAILQ_ENTRY(ccb_hdr
) stqe
;
244 u_int8_t bytes
[sizeof(void *) > sizeof(u_long
)
245 ? sizeof(void *) : sizeof(u_long
)];
249 ccb_priv_entry entries
[CCB_PERIPH_PRIV_SIZE
];
250 u_int8_t bytes
[CCB_PERIPH_PRIV_SIZE
* sizeof(ccb_priv_entry
)];
254 ccb_priv_entry entries
[CCB_SIM_PRIV_SIZE
];
255 u_int8_t bytes
[CCB_SIM_PRIV_SIZE
* sizeof(ccb_priv_entry
)];
259 cam_pinfo pinfo
; /* Info for priority scheduling */
260 camq_entry xpt_links
; /* For chaining in the XPT layer */
261 camq_entry sim_links
; /* For chaining in the SIM layer */
262 camq_entry periph_links
; /* For chaining in the type driver */
263 u_int32_t retry_count
;
264 void (*cbfcnp
)(struct cam_periph
*, union ccb
*);
265 /* Callback on completion function */
266 xpt_opcode func_code
; /* XPT function code */
267 u_int32_t status
; /* Status returned by CAM subsystem */
268 struct cam_path
*path
; /* Compiled path for this ccb */
269 path_id_t path_id
; /* Path ID for the request */
270 target_id_t target_id
; /* Target device ID */
271 lun_id_t target_lun
; /* Target LUN number */
272 u_int32_t flags
; /* ccb_flags */
273 ccb_ppriv_area periph_priv
;
274 ccb_spriv_area sim_priv
;
275 u_int32_t timeout
; /* Timeout value */
276 struct callout timeout_ch
;
277 /* Callout handle used for timeouts */
280 /* Get Device Information CCB */
282 struct ccb_hdr ccb_h
;
283 struct scsi_inquiry_data inq_data
;
284 u_int8_t serial_num
[252];
286 u_int8_t serial_num_len
;
289 /* Device Statistics CCB */
290 struct ccb_getdevstats
{
291 struct ccb_hdr ccb_h
;
292 int dev_openings
; /* Space left for more work on device*/
293 int dev_active
; /* Transactions running on the device */
294 int devq_openings
; /* Space left for more queued work */
295 int devq_queued
; /* Transactions queued to be sent */
297 * CCBs held by peripheral drivers
301 * Boundary conditions for number of
305 struct timeval last_reset
; /* Uptime of last bus reset/loop init */
309 CAM_GDEVLIST_LAST_DEVICE
,
310 CAM_GDEVLIST_LIST_CHANGED
,
311 CAM_GDEVLIST_MORE_DEVS
,
313 } ccb_getdevlist_status_e
;
315 struct ccb_getdevlist
{
316 struct ccb_hdr ccb_h
;
317 char periph_name
[DEV_IDLEN
];
318 u_int32_t unit_number
;
319 unsigned int generation
;
321 ccb_getdevlist_status_e status
;
325 PERIPH_MATCH_NONE
= 0x000,
326 PERIPH_MATCH_PATH
= 0x001,
327 PERIPH_MATCH_TARGET
= 0x002,
328 PERIPH_MATCH_LUN
= 0x004,
329 PERIPH_MATCH_NAME
= 0x008,
330 PERIPH_MATCH_UNIT
= 0x010,
331 PERIPH_MATCH_ANY
= 0x01f
332 } periph_pattern_flags
;
334 struct periph_match_pattern
{
335 char periph_name
[DEV_IDLEN
];
336 u_int32_t unit_number
;
338 target_id_t target_id
;
340 periph_pattern_flags flags
;
344 DEV_MATCH_NONE
= 0x000,
345 DEV_MATCH_PATH
= 0x001,
346 DEV_MATCH_TARGET
= 0x002,
347 DEV_MATCH_LUN
= 0x004,
348 DEV_MATCH_INQUIRY
= 0x008,
349 DEV_MATCH_ANY
= 0x00f
352 struct device_match_pattern
{
354 target_id_t target_id
;
356 struct scsi_static_inquiry_pattern inq_pat
;
357 dev_pattern_flags flags
;
361 BUS_MATCH_NONE
= 0x000,
362 BUS_MATCH_PATH
= 0x001,
363 BUS_MATCH_NAME
= 0x002,
364 BUS_MATCH_UNIT
= 0x004,
365 BUS_MATCH_BUS_ID
= 0x008,
366 BUS_MATCH_ANY
= 0x00f
369 struct bus_match_pattern
{
371 char dev_name
[DEV_IDLEN
];
372 u_int32_t unit_number
;
374 bus_pattern_flags flags
;
377 union match_pattern
{
378 struct periph_match_pattern periph_pattern
;
379 struct device_match_pattern device_pattern
;
380 struct bus_match_pattern bus_pattern
;
389 struct dev_match_pattern
{
391 union match_pattern pattern
;
394 struct periph_match_result
{
395 char periph_name
[DEV_IDLEN
];
396 u_int32_t unit_number
;
398 target_id_t target_id
;
403 DEV_RESULT_NOFLAG
= 0x00,
404 DEV_RESULT_UNCONFIGURED
= 0x01
407 struct device_match_result
{
409 target_id_t target_id
;
411 struct scsi_inquiry_data inq_data
;
412 dev_result_flags flags
;
415 struct bus_match_result
{
417 char dev_name
[DEV_IDLEN
];
418 u_int32_t unit_number
;
423 struct periph_match_result periph_result
;
424 struct device_match_result device_result
;
425 struct bus_match_result bus_result
;
428 struct dev_match_result
{
430 union match_result result
;
436 CAM_DEV_MATCH_LIST_CHANGED
,
437 CAM_DEV_MATCH_SIZE_ERROR
,
439 } ccb_dev_match_status
;
442 CAM_DEV_POS_NONE
= 0x000,
443 CAM_DEV_POS_BUS
= 0x001,
444 CAM_DEV_POS_TARGET
= 0x002,
445 CAM_DEV_POS_DEVICE
= 0x004,
446 CAM_DEV_POS_PERIPH
= 0x008,
447 CAM_DEV_POS_PDPTR
= 0x010,
448 CAM_DEV_POS_TYPEMASK
= 0xf00,
449 CAM_DEV_POS_EDT
= 0x100,
450 CAM_DEV_POS_PDRV
= 0x200
453 struct ccb_dm_cookie
{
461 struct ccb_dev_position
{
462 u_int generations
[4];
463 #define CAM_BUS_GENERATION 0x00
464 #define CAM_TARGET_GENERATION 0x01
465 #define CAM_DEV_GENERATION 0x02
466 #define CAM_PERIPH_GENERATION 0x03
467 dev_pos_type position_type
;
468 struct ccb_dm_cookie cookie
;
471 struct ccb_dev_match
{
472 struct ccb_hdr ccb_h
;
473 ccb_dev_match_status status
;
474 u_int32_t num_patterns
;
475 u_int32_t pattern_buf_len
;
476 struct dev_match_pattern
*patterns
;
477 u_int32_t num_matches
;
478 u_int32_t match_buf_len
;
479 struct dev_match_result
*matches
;
480 struct ccb_dev_position pos
;
484 * Definitions for the path inquiry CCB fields.
486 #define CAM_VERSION 0x15 /* Hex value for current version */
489 PI_MDP_ABLE
= 0x80, /* Supports MDP message */
490 PI_WIDE_32
= 0x40, /* Supports 32 bit wide SCSI */
491 PI_WIDE_16
= 0x20, /* Supports 16 bit wide SCSI */
492 PI_SDTR_ABLE
= 0x10, /* Supports SDTR message */
493 PI_LINKED_CDB
= 0x08, /* Supports linked CDBs */
494 PI_TAG_ABLE
= 0x02, /* Supports tag queue messages */
495 PI_SOFT_RST
= 0x01 /* Supports soft reset alternative */
499 PIT_PROCESSOR
= 0x80, /* Target mode processor mode */
500 PIT_PHASE
= 0x40, /* Target mode phase cog. mode */
501 PIT_DISCONNECT
= 0x20, /* Disconnects supported in target mode */
502 PIT_TERM_IO
= 0x10, /* Terminate I/O message supported in TM */
503 PIT_GRP_6
= 0x08, /* Group 6 commands supported */
504 PIT_GRP_7
= 0x04 /* Group 7 commands supported */
508 PIM_SCANHILO
= 0x80, /* Bus scans from high ID to low ID */
509 PIM_NOREMOVE
= 0x40, /* Removeable devices not included in scan */
510 PIM_NOINITIATOR
= 0x20, /* Initiator role not supported. */
511 PIM_NOBUSRESET
= 0x10, /* User has disabled initial BUS RESET */
512 PIM_NO_6_BYTE
= 0x08, /* Do not send 6-byte commands */
513 PIM_SEQSCAN
= 0x04 /* Do bus scans sequentially, not in parallel */
516 /* Path Inquiry CCB */
517 struct ccb_pathinq_settings_spi
{
518 u_int8_t ppr_options
;
520 struct ccb_pathinq_settings_fc
{
521 u_int64_t wwnn
; /* world wide node name */
522 u_int64_t wwpn
; /* world wide port name */
523 u_int32_t port
; /* 24 bit port id, if known */
524 u_int32_t bitrate
; /* Mbps */
526 struct ccb_pathinq_settings_sas
{
527 u_int32_t bitrate
; /* Mbps */
529 #define PATHINQ_SETTINGS_SIZE 128
532 struct ccb_hdr ccb_h
;
533 u_int8_t version_num
; /* Version number for the SIM/HBA */
534 u_int8_t hba_inquiry
; /* Mimic of INQ byte 7 for the HBA */
535 u_int8_t target_sprt
; /* Flags for target mode support */
536 u_int8_t hba_misc
; /* Misc HBA features */
537 u_int16_t hba_eng_cnt
; /* HBA engine count */
538 /* Vendor Unique capabilities */
539 u_int8_t vuhba_flags
[VUHBALEN
];
540 u_int32_t max_target
; /* Maximum supported Target */
541 u_int32_t max_lun
; /* Maximum supported Lun */
542 u_int32_t async_flags
; /* Installed Async handlers */
543 path_id_t hpath_id
; /* Highest Path ID in the subsystem */
544 target_id_t initiator_id
; /* ID of the HBA on the SCSI bus */
545 char sim_vid
[SIM_IDLEN
]; /* Vendor ID of the SIM */
546 char hba_vid
[HBA_IDLEN
]; /* Vendor ID of the HBA */
547 char dev_name
[DEV_IDLEN
];/* Device name for SIM */
548 u_int32_t unit_number
; /* Unit number for SIM */
549 u_int32_t bus_id
; /* Bus ID for SIM */
550 u_int32_t base_transfer_speed
;/* Base bus speed in KB/sec */
552 u_int protocol_version
;
554 u_int transport_version
;
556 struct ccb_pathinq_settings_spi spi
;
557 struct ccb_pathinq_settings_fc fc
;
558 struct ccb_pathinq_settings_sas sas
;
559 char ccb_pathinq_settings_opaque
[PATHINQ_SETTINGS_SIZE
];
563 /* Path Statistics CCB */
564 struct ccb_pathstats
{
565 struct ccb_hdr ccb_h
;
566 struct timeval last_reset
; /* Uptime of last bus reset/loop init */
570 u_int8_t
*sense_ptr
; /*
572 * for sense information
574 /* Storage Area for sense information */
575 struct scsi_sense_data sense_buf
;
579 u_int8_t
*cdb_ptr
; /* Pointer to the CDB bytes to send */
580 /* Area for the CDB send */
581 u_int8_t cdb_bytes
[IOCDBLEN
];
585 * SCSI I/O Request CCB used for the XPT_SCSI_IO and XPT_CONT_TARGET_IO
589 struct ccb_hdr ccb_h
;
590 union ccb
*next_ccb
; /* Ptr for next CCB for action */
591 u_int8_t
*req_map
; /* Ptr to mapping info */
592 u_int8_t
*data_ptr
; /* Ptr to the data buf/SG list */
593 u_int32_t dxfer_len
; /* Data transfer length */
594 /* Autosense storage */
595 struct scsi_sense_data sense_data
;
596 u_int8_t sense_len
; /* Number of bytes to autosense */
597 u_int8_t cdb_len
; /* Number of bytes for the CDB */
598 u_int16_t sglist_cnt
; /* Number of SG list entries */
599 u_int8_t scsi_status
; /* Returned SCSI status */
600 u_int8_t sense_resid
; /* Autosense resid length: 2's comp */
601 u_int32_t resid
; /* Transfer residual length: 2's comp */
602 cdb_t cdb_io
; /* Union for CDB bytes/pointer */
603 u_int8_t
*msg_ptr
; /* Pointer to the message buffer */
604 u_int16_t msg_len
; /* Number of bytes for the Message */
605 u_int8_t tag_action
; /* What to do for tag queueing */
607 * The tag action should be either the define below (to send a
608 * non-tagged transaction) or one of the defined scsi tag messages
609 * from scsi_message.h.
611 #define CAM_TAG_ACTION_NONE 0x00
612 u_int tag_id
; /* tag id from initator (target mode) */
613 u_int init_id
; /* initiator id of who selected */
616 struct ccb_accept_tio
{
617 struct ccb_hdr ccb_h
;
618 cdb_t cdb_io
; /* Union for CDB bytes/pointer */
619 u_int8_t cdb_len
; /* Number of bytes for the CDB */
620 u_int8_t tag_action
; /* What to do for tag queueing */
621 u_int8_t sense_len
; /* Number of bytes of Sense Data */
622 u_int tag_id
; /* tag id from initator (target mode) */
623 u_int init_id
; /* initiator id of who selected */
624 struct scsi_sense_data sense_data
;
627 /* Release SIM Queue */
629 struct ccb_hdr ccb_h
;
630 u_int32_t release_flags
;
631 #define RELSIM_ADJUST_OPENINGS 0x01
632 #define RELSIM_RELEASE_AFTER_TIMEOUT 0x02
633 #define RELSIM_RELEASE_AFTER_CMDCMPLT 0x04
634 #define RELSIM_RELEASE_AFTER_QEMPTY 0x08
636 u_int32_t release_timeout
;
637 u_int32_t qfrozen_cnt
;
641 * Definitions for the asynchronous callback CCB fields.
644 AC_GETDEV_CHANGED
= 0x800,/* Getdev info might have changed */
645 AC_INQ_CHANGED
= 0x400,/* Inquiry info might have changed */
646 AC_TRANSFER_NEG
= 0x200,/* New transfer settings in effect */
647 AC_LOST_DEVICE
= 0x100,/* A device went away */
648 AC_FOUND_DEVICE
= 0x080,/* A new device was found */
649 AC_PATH_DEREGISTERED
= 0x040,/* A path has de-registered */
650 AC_PATH_REGISTERED
= 0x020,/* A new path has been registered */
651 AC_SENT_BDR
= 0x010,/* A BDR message was sent to target */
652 AC_SCSI_AEN
= 0x008,/* A SCSI AEN has been received */
653 AC_UNSOL_RESEL
= 0x002,/* Unsolicited reselection occurred */
654 AC_BUS_RESET
= 0x001 /* A SCSI bus reset occurred */
657 typedef void ac_callback_t (void *softc
, u_int32_t code
,
658 struct cam_path
*path
, void *args
);
660 /* Set Asynchronous Callback CCB */
661 struct ccb_setasync
{
662 struct ccb_hdr ccb_h
;
663 u_int32_t event_enable
; /* Async Event enables */
664 ac_callback_t
*callback
;
668 /* Set Device Type CCB */
670 struct ccb_hdr ccb_h
;
671 u_int8_t dev_type
; /* Value for dev type field in EDT */
674 /* SCSI Control Functions */
676 /* Abort XPT request CCB */
678 struct ccb_hdr ccb_h
;
679 union ccb
*abort_ccb
; /* Pointer to CCB to abort */
682 /* Reset SCSI Bus CCB */
683 struct ccb_resetbus
{
684 struct ccb_hdr ccb_h
;
687 /* Reset SCSI Device CCB */
688 struct ccb_resetdev
{
689 struct ccb_hdr ccb_h
;
692 /* Terminate I/O Process Request CCB */
694 struct ccb_hdr ccb_h
;
695 union ccb
*termio_ccb
; /* Pointer to CCB to terminate */
699 CTS_TYPE_CURRENT_SETTINGS
,
700 CTS_TYPE_USER_SETTINGS
703 struct ccb_trans_settings_scsi
705 u_int valid
; /* Which fields to honor */
706 #define CTS_SCSI_VALID_TQ 0x01
708 #define CTS_SCSI_FLAGS_TAG_ENB 0x01
711 struct ccb_trans_settings_spi
713 u_int valid
; /* Which fields to honor */
714 #define CTS_SPI_VALID_SYNC_RATE 0x01
715 #define CTS_SPI_VALID_SYNC_OFFSET 0x02
716 #define CTS_SPI_VALID_BUS_WIDTH 0x04
717 #define CTS_SPI_VALID_DISC 0x08
718 #define CTS_SPI_VALID_PPR_OPTIONS 0x10
720 #define CTS_SPI_FLAGS_DISC_ENB 0x01
727 struct ccb_trans_settings_fc
{
728 u_int valid
; /* Which fields to honor */
729 #define CTS_FC_VALID_WWNN 0x8000
730 #define CTS_FC_VALID_WWPN 0x4000
731 #define CTS_FC_VALID_PORT 0x2000
732 #define CTS_FC_VALID_SPEED 0x1000
733 u_int64_t wwnn
; /* world wide node name */
734 u_int64_t wwpn
; /* world wide port name */
735 u_int32_t port
; /* 24 bit port id, if known */
736 u_int32_t bitrate
; /* Mbps */
739 struct ccb_trans_settings_sas
{
740 u_int valid
; /* Which fields to honor */
741 #define CTS_SAS_VALID_SPEED 0x1000
742 u_int32_t bitrate
; /* Mbps */
746 /* Get/Set transfer rate/width/disconnection/tag queueing settings */
747 struct ccb_trans_settings
{
748 struct ccb_hdr ccb_h
;
749 cts_type type
; /* Current or User settings */
751 u_int protocol_version
;
753 u_int transport_version
;
755 u_int valid
; /* Which fields to honor */
756 struct ccb_trans_settings_scsi scsi
;
759 u_int valid
; /* Which fields to honor */
760 struct ccb_trans_settings_spi spi
;
761 struct ccb_trans_settings_fc fc
;
762 struct ccb_trans_settings_sas sas
;
767 * Calculate the geometry parameters for a device
768 * give the block size and volume size in blocks.
770 struct ccb_calc_geometry
{
771 struct ccb_hdr ccb_h
;
772 u_int32_t block_size
;
773 u_int64_t volume_size
;
776 u_int8_t secs_per_track
;
780 * Rescan the given bus, or bus/target/lun
783 struct ccb_hdr ccb_h
;
788 * Turn on debugging for the given bus, bus/target, or bus/target/lun.
791 struct ccb_hdr ccb_h
;
792 cam_debug_flags flags
;
795 /* Target mode structures. */
798 struct ccb_hdr ccb_h
;
799 u_int16_t grp6_len
; /* Group 6 VU CDB length */
800 u_int16_t grp7_len
; /* Group 7 VU CDB length */
804 struct ccb_immed_notify
{
805 struct ccb_hdr ccb_h
;
806 struct scsi_sense_data sense_data
;
807 u_int8_t sense_len
; /* Number of bytes in sense buffer */
808 u_int8_t initiator_id
; /* Id of initiator that selected */
809 u_int8_t message_args
[7]; /* Message Arguments */
812 struct ccb_notify_ack
{
813 struct ccb_hdr ccb_h
;
814 u_int16_t seq_id
; /* Sequence identifier */
815 u_int8_t event
; /* Event flags */
818 /* HBA engine structures. */
821 EIT_BUFFER
, /* Engine type: buffer memory */
822 EIT_LOSSLESS
, /* Engine type: lossless compression */
823 EIT_LOSSY
, /* Engine type: lossy compression */
824 EIT_ENCRYPT
/* Engine type: encryption */
828 EAD_VUNIQUE
, /* Engine algorithm ID: vendor unique */
829 EAD_LZ1V1
, /* Engine algorithm ID: LZ1 var.1 */
830 EAD_LZ2V1
, /* Engine algorithm ID: LZ2 var.1 */
831 EAD_LZ2V2
/* Engine algorithm ID: LZ2 var.2 */
835 struct ccb_hdr ccb_h
;
836 u_int16_t eng_num
; /* The engine number for this inquiry */
837 ei_type eng_type
; /* Returned engine type */
838 ei_algo eng_algo
; /* Returned engine algorithm type */
839 u_int32_t eng_memeory
; /* Returned engine memory size */
842 struct ccb_eng_exec
{ /* This structure must match SCSIIO size */
843 struct ccb_hdr ccb_h
;
844 u_int8_t
*pdrv_ptr
; /* Ptr used by the peripheral driver */
845 u_int8_t
*req_map
; /* Ptr for mapping info on the req. */
846 u_int8_t
*data_ptr
; /* Pointer to the data buf/SG list */
847 u_int32_t dxfer_len
; /* Data transfer length */
848 u_int8_t
*engdata_ptr
; /* Pointer to the engine buffer data */
849 u_int16_t sglist_cnt
; /* Num of scatter gather list entries */
850 u_int32_t dmax_len
; /* Destination data maximum length */
851 u_int32_t dest_len
; /* Destination data length */
852 int32_t src_resid
; /* Source residual length: 2's comp */
853 u_int32_t timeout
; /* Timeout value */
854 u_int16_t eng_num
; /* Engine number for this request */
855 u_int16_t vu_flags
; /* Vendor Unique flags */
859 * Definitions for the timeout field in the SCSI I/O CCB.
861 #define CAM_TIME_DEFAULT 0x00000000 /* Use SIM default value */
862 #define CAM_TIME_INFINITY 0xFFFFFFFF /* Infinite timeout */
864 #define CAM_SUCCESS 0 /* For signaling general success */
865 #define CAM_FAILURE 1 /* For signaling general failure */
870 #define XPT_CCB_INVALID -1 /* for signaling a bad CCB to free */
873 * Union of all CCB types for kernel space allocation. This union should
874 * never be used for manipulating CCBs - its only use is for the allocation
875 * and deallocation of raw CCB space and is the return type of xpt_ccb_alloc
876 * and the argument to xpt_ccb_free.
879 struct ccb_hdr ccb_h
; /* For convenience */
880 struct ccb_scsiio csio
;
881 struct ccb_getdev cgd
;
882 struct ccb_getdevlist cgdl
;
883 struct ccb_pathinq cpi
;
884 struct ccb_relsim crs
;
885 struct ccb_setasync csa
;
886 struct ccb_setdev csd
;
887 struct ccb_pathstats cpis
;
888 struct ccb_getdevstats cgds
;
889 struct ccb_dev_match cdm
;
890 struct ccb_trans_settings cts
;
891 struct ccb_calc_geometry ccg
;
892 struct ccb_abort cab
;
893 struct ccb_resetbus crb
;
894 struct ccb_resetdev crd
;
895 struct ccb_termio tio
;
896 struct ccb_accept_tio atio
;
897 struct ccb_scsiio ctio
;
898 struct ccb_en_lun cel
;
899 struct ccb_immed_notify cin
;
900 struct ccb_notify_ack cna
;
901 struct ccb_eng_inq cei
;
902 struct ccb_eng_exec cee
;
903 struct ccb_rescan crcn
;
904 struct ccb_debug cdbg
;
909 cam_fill_csio(struct ccb_scsiio
*csio
, u_int32_t retries
,
910 void (*cbfcnp
)(struct cam_periph
*, union ccb
*),
911 u_int32_t flags
, u_int8_t tag_action
,
912 u_int8_t
*data_ptr
, u_int32_t dxfer_len
,
913 u_int8_t sense_len
, u_int8_t cdb_len
,
917 cam_fill_ctio(struct ccb_scsiio
*csio
, u_int32_t retries
,
918 void (*cbfcnp
)(struct cam_periph
*, union ccb
*),
919 u_int32_t flags
, u_int tag_action
, u_int tag_id
,
920 u_int init_id
, u_int scsi_status
, u_int8_t
*data_ptr
,
921 u_int32_t dxfer_len
, u_int32_t timeout
);
924 cam_fill_csio(struct ccb_scsiio
*csio
, u_int32_t retries
,
925 void (*cbfcnp
)(struct cam_periph
*, union ccb
*),
926 u_int32_t flags
, u_int8_t tag_action
,
927 u_int8_t
*data_ptr
, u_int32_t dxfer_len
,
928 u_int8_t sense_len
, u_int8_t cdb_len
,
931 csio
->ccb_h
.func_code
= XPT_SCSI_IO
;
932 csio
->ccb_h
.flags
= flags
;
933 csio
->ccb_h
.retry_count
= retries
;
934 csio
->ccb_h
.cbfcnp
= cbfcnp
;
935 csio
->ccb_h
.timeout
= timeout
;
936 csio
->data_ptr
= data_ptr
;
937 csio
->dxfer_len
= dxfer_len
;
938 csio
->sense_len
= sense_len
;
939 csio
->cdb_len
= cdb_len
;
940 csio
->tag_action
= tag_action
;
944 cam_fill_ctio(struct ccb_scsiio
*csio
, u_int32_t retries
,
945 void (*cbfcnp
)(struct cam_periph
*, union ccb
*),
946 u_int32_t flags
, u_int tag_action
, u_int tag_id
,
947 u_int init_id
, u_int scsi_status
, u_int8_t
*data_ptr
,
948 u_int32_t dxfer_len
, u_int32_t timeout
)
950 csio
->ccb_h
.func_code
= XPT_CONT_TARGET_IO
;
951 csio
->ccb_h
.flags
= flags
;
952 csio
->ccb_h
.retry_count
= retries
;
953 csio
->ccb_h
.cbfcnp
= cbfcnp
;
954 csio
->ccb_h
.timeout
= timeout
;
955 csio
->data_ptr
= data_ptr
;
956 csio
->dxfer_len
= dxfer_len
;
957 csio
->scsi_status
= scsi_status
;
958 csio
->tag_action
= tag_action
;
959 csio
->tag_id
= tag_id
;
960 csio
->init_id
= init_id
;
963 void cam_calc_geometry(struct ccb_calc_geometry
*ccg
, int extended
);
967 #endif /* _CAM_CAM_CCB_H */