kgdb(1): Add missing "

[dragonfly.git] / sys / kern / kern_timeout.c

/*
 * Copyright (c) 2004,2014 The DragonFly Project.  All rights reserved.
 * 
 * This code is derived from software contributed to The DragonFly Project
 * by Matthew Dillon <dillon@backplane.com>
 * 
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 * 3. Neither the name of The DragonFly Project nor the names of its
 *    contributors may be used to endorse or promote products derived
 *    from this software without specific, prior written permission.
 * 
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE
 * COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES (INCLUDING,
 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
 * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 */
/*
 * Copyright (c) 1982, 1986, 1991, 1993
 *      The Regents of the University of California.  All rights reserved.
 * (c) UNIX System Laboratories, Inc.
 * All or some portions of this file are derived from material licensed
 * to the University of California by American Telephone and Telegraph
 * Co. or Unix System Laboratories, Inc. and are reproduced herein with
 * the permission of UNIX System Laboratories, Inc.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. Neither the name of the University nor the names of its contributors
 *    may be used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 */
/*
 * The original callout mechanism was based on the work of Adam M. Costello
 * and George Varghese, published in a technical report entitled "Redesigning
 * the BSD Callout and Timer Facilities" and modified slightly for inclusion
 * in FreeBSD by Justin T. Gibbs.  The original work on the data structures
 * used in this implementation was published by G. Varghese and T. Lauck in
 * the paper "Hashed and Hierarchical Timing Wheels: Data Structures for
 * the Efficient Implementation of a Timer Facility" in the Proceedings of
 * the 11th ACM Annual Symposium on Operating Systems Principles,
 * Austin, Texas Nov 1987.
 *
 * The per-cpu augmentation was done by Matthew Dillon.  This file has
 * essentially been rewritten pretty much from scratch by Matt.
 */

#include <sys/param.h>
#include <sys/systm.h>
#include <sys/callout.h>
#include <sys/kernel.h>
#include <sys/interrupt.h>
#include <sys/thread.h>

#include <sys/thread2.h>
#include <sys/mplock2.h>

#include <vm/vm_extern.h>

struct softclock_pcpu {
        struct callout_tailq *callwheel;
        struct callout * volatile next;
        intptr_t running;       /* NOTE! Bit 0 used to flag wakeup */
        int softticks;          /* softticks index */
        int curticks;           /* per-cpu ticks counter */
        int isrunning;
        struct thread thread;
};

typedef struct softclock_pcpu *softclock_pcpu_t;

static int cwheelsize;
static int cwheelmask;
static softclock_pcpu_t softclock_pcpu_ary[MAXCPU];

static void softclock_handler(void *arg);
static void slotimer_callback(void *arg);
static void callout_reset_ipi(void *arg);
static void callout_stop_ipi(void *arg, int issync, struct intrframe *frame);

static __inline int
callout_setclear(struct callout *c, int sflags, int cflags)
{
        int flags;
        int nflags;

        for (;;) {
                flags = c->c_flags;
                cpu_ccfence();
                nflags = (flags | sflags) & ~cflags;
                if (atomic_cmpset_int(&c->c_flags, flags, nflags))
                        break;
        }
        return flags;
}

static void
swi_softclock_setup(void *arg)
{
        int cpu;
        int i;
        int target;

        /*
         * Figure out how large a callwheel we need.  It must be a power of 2.
         *
         * ncallout is primarily based on available memory, don't explode
         * the allocations if the system has a lot of cpus.
         */
        target = ncallout / ncpus + 16;

        cwheelsize = 1;
        while (cwheelsize < target)
                cwheelsize <<= 1;
        cwheelmask = cwheelsize - 1;

        /*
         * Initialize per-cpu data structures.
         */
        for (cpu = 0; cpu < ncpus; ++cpu) {
                softclock_pcpu_t sc;
                int wheel_sz;

                sc = (void *)kmem_alloc3(&kernel_map, sizeof(*sc),
                                         VM_SUBSYS_GD, KM_CPU(cpu));
                memset(sc, 0, sizeof(*sc));
                softclock_pcpu_ary[cpu] = sc;

                wheel_sz = sizeof(*sc->callwheel) * cwheelsize;
                sc->callwheel = (void *)kmem_alloc3(&kernel_map, wheel_sz,
                                                    VM_SUBSYS_GD, KM_CPU(cpu));
                memset(sc->callwheel, 0, wheel_sz);
                for (i = 0; i < cwheelsize; ++i)
                        TAILQ_INIT(&sc->callwheel[i]);

                /*
                 * Mark the softclock handler as being an interrupt thread
                 * even though it really isn't, but do not allow it to
                 * preempt other threads (do not assign td_preemptable).
                 *
                 * Kernel code now assumes that callouts do not preempt
                 * the cpu they were scheduled on.
                 */
                lwkt_create(softclock_handler, sc, NULL, &sc->thread,
                            TDF_NOSTART | TDF_INTTHREAD,
                            cpu, "softclock %d", cpu);
        }
}

/*
 * Must occur after ncpus has been initialized.
 */
SYSINIT(softclock_setup, SI_BOOT2_SOFTCLOCK, SI_ORDER_SECOND,
        swi_softclock_setup, NULL);

/*
 * This routine is called from the hardclock() (basically a FASTint/IPI) on
 * each cpu in the system.  sc->curticks is this cpu's notion of the timebase.
 * It IS NOT NECESSARILY SYNCHRONIZED WITH 'ticks'!  sc->softticks is where
 * the callwheel is currently indexed.
 *
 * WARNING!  The MP lock is not necessarily held on call, nor can it be
 * safely obtained.
 *
 * sc->softticks is adjusted by either this routine or our helper thread
 * depending on whether the helper thread is running or not.
 */
void
hardclock_softtick(globaldata_t gd)
{
        softclock_pcpu_t sc;

        sc = softclock_pcpu_ary[gd->gd_cpuid];
        ++sc->curticks;
        if (sc->isrunning)
                return;
        if (sc->softticks == sc->curticks) {
                /*
                 * In sync, only wakeup the thread if there is something to
                 * do.
                 */
                if (TAILQ_FIRST(&sc->callwheel[sc->softticks & cwheelmask])) {
                        sc->isrunning = 1;
                        lwkt_schedule(&sc->thread);
                } else {
                        ++sc->softticks;
                }
        } else {
                /*
                 * out of sync, wakeup the thread unconditionally so it can
                 * catch up.
                 */
                sc->isrunning = 1;
                lwkt_schedule(&sc->thread);
        }
}

/*
 * This procedure is the main loop of our per-cpu helper thread.  The
 * sc->isrunning flag prevents us from racing hardclock_softtick() and
 * a critical section is sufficient to interlock sc->curticks and protect
 * us from remote IPI's / list removal.
 *
 * The thread starts with the MP lock released and not in a critical
 * section.  The loop itself is MP safe while individual callbacks
 * may or may not be, so we obtain or release the MP lock as appropriate.
 */
static void
softclock_handler(void *arg)
{
        softclock_pcpu_t sc;
        struct callout *c;
        struct callout_tailq *bucket;
        struct callout slotimer;
        int mpsafe = 1;
        int flags;

        /*
         * Setup pcpu slow clocks which we want to run from the callout
         * thread.
         */
        callout_init_mp(&slotimer);
        callout_reset(&slotimer, hz * 10, slotimer_callback, &slotimer);

        /*
         * Run the callout thread at the same priority as other kernel
         * threads so it can be round-robined.
         */
        /*lwkt_setpri_self(TDPRI_SOFT_NORM);*/

        /*
         * Loop critical section against ipi operations to this cpu.
         */
        sc = arg;
        crit_enter();
loop:
        while (sc->softticks != (int)(sc->curticks + 1)) {
                bucket = &sc->callwheel[sc->softticks & cwheelmask];

                for (c = TAILQ_FIRST(bucket); c; c = sc->next) {
                        void (*c_func)(void *);
                        void *c_arg;
                        struct lock *c_lk;
                        int error;

                        if (c->c_time != sc->softticks) {
                                sc->next = TAILQ_NEXT(c, c_links.tqe);
                                continue;
                        }

                        /*
                         * Synchronize with mpsafe requirements
                         */
                        flags = c->c_flags;
                        if (flags & CALLOUT_MPSAFE) {
                                if (mpsafe == 0) {
                                        mpsafe = 1;
                                        rel_mplock();
                                }
                        } else {
                                /*
                                 * The request might be removed while we 
                                 * are waiting to get the MP lock.  If it
                                 * was removed sc->next will point to the
                                 * next valid request or NULL, loop up.
                                 */
                                if (mpsafe) {
                                        mpsafe = 0;
                                        sc->next = c;
                                        get_mplock();
                                        if (c != sc->next)
                                                continue;
                                }
                        }

                        /*
                         * Queue protection only exists while we hold the
                         * critical section uninterrupted.
                         *
                         * Adjust sc->next when removing (c) from the queue,
                         * note that an IPI on this cpu may make further
                         * adjustments to sc->next.
                         */
                        sc->next = TAILQ_NEXT(c, c_links.tqe);
                        TAILQ_REMOVE(bucket, c, c_links.tqe);

                        KASSERT((c->c_flags & CALLOUT_DID_INIT) &&
                                (c->c_flags & CALLOUT_PENDING) &&
                                CALLOUT_FLAGS_TO_CPU(c->c_flags) ==
                                mycpu->gd_cpuid,
                                ("callout %p: bad flags %08x", c, c->c_flags));

                        /*
                         * Once CALLOUT_PENDING is cleared only the IPI_MASK
                         * prevents the callout from being moved to another
                         * cpu.  However, callout_stop() will also check
                         * sc->running on the assigned cpu if CALLOUT_EXECUTED
                         * is set.  CALLOUT_EXECUTE implies a callback
                         * interlock is needed when cross-cpu.
                         */
                        sc->running = (intptr_t)c;
                        c_func = c->c_func;
                        c_arg = c->c_arg;
                        c_lk = c->c_lk;
                        c->c_func = NULL;

                        if ((flags & (CALLOUT_AUTOLOCK | CALLOUT_ACTIVE)) ==
                            (CALLOUT_AUTOLOCK | CALLOUT_ACTIVE)) {
                                error = lockmgr(c_lk, LK_EXCLUSIVE |
                                                      LK_CANCELABLE);
                                if (error == 0) {
                                        flags = callout_setclear(c,
                                                        CALLOUT_EXECUTED,
                                                        CALLOUT_PENDING |
                                                        CALLOUT_WAITING);
                                        crit_exit();
                                        c_func(c_arg);
                                        crit_enter();
                                        lockmgr(c_lk, LK_RELEASE);
                                } else {
                                        flags = callout_setclear(c,
                                                        0,
                                                        CALLOUT_PENDING);
                                }
                        } else if (flags & CALLOUT_ACTIVE) {
                                flags = callout_setclear(c,
                                                CALLOUT_EXECUTED,
                                                CALLOUT_PENDING |
                                                CALLOUT_WAITING);
                                crit_exit();
                                c_func(c_arg);
                                crit_enter();
                        } else {
                                flags = callout_setclear(c,
                                                0,
                                                CALLOUT_PENDING |
                                                CALLOUT_WAITING);
                        }

                        /*
                         * Read and clear sc->running.  If bit 0 was set,
                         * a callout_stop() is likely blocked waiting for
                         * the callback to complete.
                         *
                         * The sigclear above also cleared CALLOUT_WAITING
                         * and returns the contents of flags prior to clearing
                         * any bits.
                         *
                         * Interlock wakeup any _stop's waiting on us.  Note
                         * that once c_func() was called, the callout
                         * structure (c) pointer may no longer be valid.  It
                         * can only be used for the wakeup.
                         */
                        if ((atomic_readandclear_ptr(&sc->running) & 1) ||
                            (flags & CALLOUT_WAITING)) {
                                wakeup(c);
                        }
                        /* NOTE: list may have changed */
                }
                ++sc->softticks;
        }

        /*
         * Don't leave us holding the MP lock when we deschedule ourselves.
         */
        if (mpsafe == 0) {
                mpsafe = 1;
                rel_mplock();
        }
        sc->isrunning = 0;
        lwkt_deschedule_self(&sc->thread);      /* == curthread */
        lwkt_switch();
        goto loop;
        /* NOT REACHED */
}

/*
 * A very slow system cleanup timer (10 second interval),
 * per-cpu.
 */
void
slotimer_callback(void *arg)
{
        struct callout *c = arg;

        slab_cleanup();
        callout_reset(c, hz * 10, slotimer_callback, c);
}

/*
 * Start or restart a timeout.  Installs the callout structure on the
 * callwheel of the current cpu.  Callers may legally pass any value, even
 * if 0 or negative, but since the sc->curticks index may have already
 * been processed a minimum timeout of 1 tick will be enforced.
 *
 * This function will block if the callout is currently queued to a different
 * cpu or the callback is currently running in another thread.
 */
void
callout_reset(struct callout *c, int to_ticks, void (*ftn)(void *), void *arg)
{
        softclock_pcpu_t sc;
        globaldata_t gd;

#ifdef INVARIANTS
        if ((c->c_flags & CALLOUT_DID_INIT) == 0) {
                callout_init(c);
                kprintf(
                    "callout_reset(%p) from %p: callout was not initialized\n",
                    c, ((int **)&c)[-1]);
                print_backtrace(-1);
        }
#endif
        gd = mycpu;
        sc = softclock_pcpu_ary[gd->gd_cpuid];
        crit_enter_gd(gd);

        /*
         * Our cpu must gain ownership of the callout and cancel anything
         * still running, which is complex.  The easiest way to do it is to
         * issue a callout_stop_sync().  callout_stop_sync() will also
         * handle CALLOUT_EXECUTED (dispatch waiting), and clear it.
         *
         * WARNING: callout_stop_sync()'s return state can race other
         *          callout_*() calls due to blocking, so we must re-check.
         */
        for (;;) {
                int flags;
                int nflags;

                if (c->c_flags & (CALLOUT_ARMED_MASK | CALLOUT_EXECUTED))
                        callout_stop_sync(c);
                flags = c->c_flags & ~(CALLOUT_ARMED_MASK | CALLOUT_EXECUTED);
                nflags = (flags & ~CALLOUT_CPU_MASK) |
                         CALLOUT_CPU_TO_FLAGS(gd->gd_cpuid) |
                         CALLOUT_PENDING |
                         CALLOUT_ACTIVE;
                if (atomic_cmpset_int(&c->c_flags, flags, nflags))
                        break;
                cpu_pause();
        }

        /*
         * With the critical section held and PENDING set we now 'own' the
         * callout.
         */
        if (to_ticks <= 0)
                to_ticks = 1;

        c->c_arg = arg;
        c->c_func = ftn;
        c->c_time = sc->curticks + to_ticks;

        TAILQ_INSERT_TAIL(&sc->callwheel[c->c_time & cwheelmask],
                          c, c_links.tqe);
        crit_exit_gd(gd);
}

/*
 * Setup a callout to run on the specified cpu.  Should generally be used
 * to run a callout on a specific cpu which does not nominally change.  This
 * callout_reset() will be issued asynchronously via an IPI.
 */
void
callout_reset_bycpu(struct callout *c, int to_ticks, void (*ftn)(void *),
                    void *arg, int cpuid)
{
        globaldata_t gd;
        globaldata_t tgd;

#ifdef INVARIANTS
        if ((c->c_flags & CALLOUT_DID_INIT) == 0) {
                callout_init(c);
                kprintf(
                    "callout_reset(%p) from %p: callout was not initialized\n",
                    c, ((int **)&c)[-1]);
                print_backtrace(-1);
        }
#endif
        gd = mycpu;
        crit_enter_gd(gd);

        tgd = globaldata_find(cpuid);

        /*
         * This code is similar to the code in callout_reset() but we assign
         * the callout to the target cpu.  We cannot set PENDING here since
         * we cannot atomically add the callout to the target cpu's queue.
         * However, incrementing the IPI count has the effect of locking
         * the cpu assignment.
         *
         * WARNING: callout_stop_sync()'s return state can race other
         *          callout_*() calls due to blocking, so we must re-check.
         */
        for (;;) {
                int flags;
                int nflags;

                if (c->c_flags & (CALLOUT_ARMED_MASK | CALLOUT_EXECUTED))
                        callout_stop_sync(c);
                flags = c->c_flags & ~(CALLOUT_ARMED_MASK | CALLOUT_EXECUTED);
                nflags = (flags & ~(CALLOUT_CPU_MASK |
                                    CALLOUT_EXECUTED)) |
                         CALLOUT_CPU_TO_FLAGS(tgd->gd_cpuid) |
                         CALLOUT_ACTIVE;
                nflags = nflags + 1;            /* bump IPI count */
                if (atomic_cmpset_int(&c->c_flags, flags, nflags))
                        break;
                cpu_pause();
        }

        /*
         * Since we control our +1 in the IPI count, the target cpu cannot
         * now change until our IPI is processed.
         */
        if (to_ticks <= 0)
                to_ticks = 1;

        c->c_arg = arg;
        c->c_func = ftn;
        c->c_load = to_ticks;   /* IPI will add curticks */

        lwkt_send_ipiq(tgd, callout_reset_ipi, c);
        crit_exit_gd(gd);
}

/*
 * Remote IPI for callout_reset_bycpu().  The cpu assignment cannot be
 * ripped out from under us due to the count in IPI_MASK, but it is possible
 * that other IPIs executed so we must deal with other flags that might
 * have been set or cleared.
 */
static void
callout_reset_ipi(void *arg)
{
        struct callout *c = arg;
        globaldata_t gd = mycpu;
        softclock_pcpu_t sc;
        int flags;
        int nflags;

        sc = softclock_pcpu_ary[gd->gd_cpuid];

        for (;;) {
                flags = c->c_flags;
                cpu_ccfence();
                KKASSERT((flags & CALLOUT_IPI_MASK) > 0 &&
                         CALLOUT_FLAGS_TO_CPU(flags) == gd->gd_cpuid);

                nflags = (flags - 1) & ~(CALLOUT_EXECUTED | CALLOUT_WAITING);
                nflags |= CALLOUT_PENDING;

                /*
                 * Put us on the queue
                 */
                if (atomic_cmpset_int(&c->c_flags, flags, nflags)) {
                        if (flags & CALLOUT_PENDING) {
                                if (sc->next == c)
                                        sc->next = TAILQ_NEXT(c, c_links.tqe);
                                TAILQ_REMOVE(
                                        &sc->callwheel[c->c_time & cwheelmask],
                                        c,
                                        c_links.tqe);
                        }
                        c->c_time = sc->curticks + c->c_load;
                        TAILQ_INSERT_TAIL(
                                &sc->callwheel[c->c_time & cwheelmask],
                                c, c_links.tqe);
                        break;
                }
                /* retry */
                cpu_pause();
        }

        /*
         * Issue wakeup if requested.
         */
        if (flags & CALLOUT_WAITING)
                wakeup(c);
}

/*
 * Stop a running timer and ensure that any running callout completes before
 * returning.  If the timer is running on another cpu this function may block
 * to interlock against the callout.  If the callout is currently executing
 * or blocked in another thread this function may also block to interlock
 * against the callout.
 *
 * The caller must be careful to avoid deadlocks, either by using
 * callout_init_lk() (which uses the lockmgr lock cancelation feature),
 * by using tokens and dealing with breaks in the serialization, or using
 * the lockmgr lock cancelation feature yourself in the callout callback
 * function.
 *
 * callout_stop() returns non-zero if the callout was pending.
 */
static int
_callout_stop(struct callout *c, int issync)
{
        globaldata_t gd = mycpu;
        globaldata_t tgd;
        softclock_pcpu_t sc;
        int flags;
        int nflags;
        int rc;
        int cpuid;

#ifdef INVARIANTS
        if ((c->c_flags & CALLOUT_DID_INIT) == 0) {
                callout_init(c);
                kprintf(
                    "callout_stop(%p) from %p: callout was not initialized\n",
                    c, ((int **)&c)[-1]);
                print_backtrace(-1);
        }
#endif
        crit_enter_gd(gd);

retry:
        /*
         * Adjust flags for the required operation.  If the callout is
         * armed on another cpu we break out into the remote-cpu code which
         * will issue an IPI.  If it is not armed we are trivially done,
         * but may still need to test EXECUTED.
         */
        for (;;) {
                flags = c->c_flags;
                cpu_ccfence();

                cpuid = CALLOUT_FLAGS_TO_CPU(flags);

                /*
                 * Armed on remote cpu (break to remote-cpu code)
                 */
                if ((flags & CALLOUT_ARMED_MASK) && gd->gd_cpuid != cpuid) {
                        nflags = flags + 1;
                        if (atomic_cmpset_int(&c->c_flags, flags, nflags)) {
                                /*
                                 * BREAK TO REMOTE-CPU CODE HERE
                                 */
                                break;
                        }
                        cpu_pause();
                        continue;
                }

                /*
                 * Armed or armable on current cpu
                 */
                if (flags & CALLOUT_IPI_MASK) {
                        lwkt_process_ipiq();
                        cpu_pause();
                        continue;       /* retry */
                }

                /*
                 * If PENDING is set we can remove the callout from our
                 * queue and also use the side effect that the bit causes
                 * the callout to be locked to our cpu.
                 */
                if (flags & CALLOUT_PENDING) {
                        sc = softclock_pcpu_ary[gd->gd_cpuid];
                        if (sc->next == c)
                                sc->next = TAILQ_NEXT(c, c_links.tqe);
                        TAILQ_REMOVE(
                                &sc->callwheel[c->c_time & cwheelmask],
                                c,
                                c_links.tqe);
                        c->c_func = NULL;

                        for (;;) {
                                flags = c->c_flags;
                                cpu_ccfence();
                                nflags = flags & ~(CALLOUT_ACTIVE |
                                                   CALLOUT_EXECUTED |
                                                   CALLOUT_WAITING |
                                                   CALLOUT_PENDING);
                                if (atomic_cmpset_int(&c->c_flags,
                                                      flags, nflags)) {
                                        goto skip_slow;
                                }
                                cpu_pause();
                        }
                        /* NOT REACHED */
                }

                /*
                 * If PENDING was not set the callout might not be locked
                 * to this cpu.
                 */
                nflags = flags & ~(CALLOUT_ACTIVE |
                                   CALLOUT_EXECUTED |
                                   CALLOUT_WAITING |
                                   CALLOUT_PENDING);
                if (atomic_cmpset_int(&c->c_flags, flags, nflags)) {
                        goto skip_slow;
                }
                cpu_pause();
                /* retry */
        }

        /*
         * Remote cpu path.  We incremented the IPI_MASK count so the callout
         * is now locked to the remote cpu and we can safely send an IPI
         * to it.
         *
         * Once sent, wait for all IPIs to be processed.  If PENDING remains
         * set after all IPIs have processed we raced a callout or
         * callout_reset and must retry.  Callers expect the callout to
         * be completely stopped upon return, so make sure it is.
         */
        tgd = globaldata_find(cpuid);
        lwkt_send_ipiq3(tgd, callout_stop_ipi, c, issync);

        for (;;) {
                flags = c->c_flags;
                cpu_ccfence();

                if ((flags & CALLOUT_IPI_MASK) == 0)
                        break;

                nflags = flags | CALLOUT_WAITING;
                tsleep_interlock(c, 0);
                if (atomic_cmpset_int(&c->c_flags, flags, nflags)) {
                        tsleep(c, PINTERLOCKED, "cstp1", 0);
                }
        }
        if (flags & CALLOUT_PENDING)
                goto retry;

        /*
         * Caller expects callout_stop_sync() to clear EXECUTED and return
         * its previous status.
         */
        atomic_clear_int(&c->c_flags, CALLOUT_EXECUTED);

skip_slow:
        if (flags & CALLOUT_WAITING)
                wakeup(c);

        /*
         * If (issync) we must also wait for any in-progress callbacks to
         * complete, unless the stop is being executed from the callback
         * itself.  The EXECUTED flag is set prior to the callback
         * being made so our existing flags status already has it.
         *
         * If auto-lock mode is being used, this is where we cancel any
         * blocked lock that is potentially preventing the target cpu
         * from completing the callback.
         */
        while (issync) {
                intptr_t *runp;
                intptr_t runco;

                sc = softclock_pcpu_ary[cpuid];
                if (gd->gd_curthread == &sc->thread)    /* stop from cb */
                        break;
                runp = &sc->running;
                runco = *runp;
                cpu_ccfence();
                if ((runco & ~(intptr_t)1) != (intptr_t)c)
                        break;
                if (c->c_flags & CALLOUT_AUTOLOCK)
                        lockmgr(c->c_lk, LK_CANCEL_BEG);
                tsleep_interlock(c, 0);
                if (atomic_cmpset_long(runp, runco, runco | 1))
                        tsleep(c, PINTERLOCKED, "cstp3", 0);
                if (c->c_flags & CALLOUT_AUTOLOCK)
                        lockmgr(c->c_lk, LK_CANCEL_END);
        }

        crit_exit_gd(gd);
        rc = (flags & CALLOUT_EXECUTED) != 0;

        return rc;
}

/*
 * IPI for stop function.  The callout is locked to the receiving cpu
 * by the IPI_MASK count.
 */
static void
callout_stop_ipi(void *arg, int issync, struct intrframe *frame)
{
        globaldata_t gd = mycpu;
        struct callout *c = arg;
        softclock_pcpu_t sc;
        int flags;
        int nflags;

        flags = c->c_flags;
        cpu_ccfence();

        KKASSERT(CALLOUT_FLAGS_TO_CPU(flags) == gd->gd_cpuid);

        /*
         * We can handle the PENDING flag immediately.
         */
        if (flags & CALLOUT_PENDING) {
                sc = softclock_pcpu_ary[gd->gd_cpuid];
                if (sc->next == c)
                        sc->next = TAILQ_NEXT(c, c_links.tqe);
                TAILQ_REMOVE(
                        &sc->callwheel[c->c_time & cwheelmask],
                        c,
                        c_links.tqe);
                c->c_func = NULL;
        }

        /*
         * Transition to the stopped state and decrement the IPI count.
         * Leave the EXECUTED bit alone (the next callout_reset() will
         * have to deal with it).
         */
        for (;;) {
                flags = c->c_flags;
                cpu_ccfence();
                nflags = (flags - 1) & ~(CALLOUT_ACTIVE |
                                         CALLOUT_PENDING |
                                         CALLOUT_WAITING);

                if (atomic_cmpset_int(&c->c_flags, flags, nflags))
                        break;
                cpu_pause();
        }
        if (flags & CALLOUT_WAITING)
                wakeup(c);
}

int
callout_stop(struct callout *c)
{
        return _callout_stop(c, 0);
}

int
callout_stop_sync(struct callout *c)
{
        return _callout_stop(c, 1);
}

void
callout_stop_async(struct callout *c)
{
        _callout_stop(c, 0);
}

void
callout_terminate(struct callout *c)
{
        _callout_stop(c, 1);
        atomic_clear_int(&c->c_flags, CALLOUT_DID_INIT);
}

/*
 * Prepare a callout structure for use by callout_reset() and/or 
 * callout_stop().
 *
 * The MP version of this routine requires that the callback
 * function installed by callout_reset() be MP safe.
 *
 * The LK version of this routine is also MPsafe and will automatically
 * acquire the specified lock for the duration of the function call,
 * and release it after the function returns.  In addition, when autolocking
 * is used, callout_stop() becomes synchronous if the caller owns the lock.
 * callout_reset(), callout_stop(), and callout_stop_sync() will block
 * normally instead of spinning when a cpu race occurs.  Lock cancelation
 * is used to avoid deadlocks against the callout ring dispatch.
 *
 * The init functions can be called from any cpu and do not have to be
 * called from the cpu that the timer will eventually run on.
 */
static __inline void
_callout_init(struct callout *c, int flags)
{
        bzero(c, sizeof *c);
        c->c_flags = flags;
}

void
callout_init(struct callout *c)
{
        _callout_init(c, CALLOUT_DID_INIT);
}

void
callout_init_mp(struct callout *c)
{
        _callout_init(c, CALLOUT_DID_INIT | CALLOUT_MPSAFE);
}

void
callout_init_lk(struct callout *c, struct lock *lk)
{
        _callout_init(c, CALLOUT_DID_INIT | CALLOUT_MPSAFE | CALLOUT_AUTOLOCK);
        c->c_lk = lk;
}