hammer2 - Consolidate backend rename ops

[dragonfly.git] / sys / vfs / hammer2 / hammer2_disk.h

/*
 * Copyright (c) 2011-2014 The DragonFly Project.  All rights reserved.
 *
 * This code is derived from software contributed to The DragonFly Project
 * by Matthew Dillon <dillon@dragonflybsd.org>
 * by Venkatesh Srinivas <vsrinivas@dragonflybsd.org>
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 * 3. Neither the name of The DragonFly Project nor the names of its
 *    contributors may be used to endorse or promote products derived
 *    from this software without specific, prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE
 * COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES (INCLUDING,
 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
 * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 */

#ifndef _VFS_HAMMER2_DISK_H_
#define _VFS_HAMMER2_DISK_H_

#ifndef _SYS_UUID_H_
#include <sys/uuid.h>
#endif
#ifndef _SYS_DMSG_H_
#include <sys/dmsg.h>
#endif

/*
 * The structures below represent the on-disk media structures for the HAMMER2
 * filesystem.  Note that all fields for on-disk structures are naturally
 * aligned.  The host endian format is typically used - compatibility is
 * possible if the implementation detects reversed endian and adjusts accesses
 * accordingly.
 *
 * HAMMER2 primarily revolves around the directory topology:  inodes,
 * directory entries, and block tables.  Block device buffer cache buffers
 * are always 64KB.  Logical file buffers are typically 16KB.  All data
 * references utilize 64-bit byte offsets.
 *
 * Free block management is handled independently using blocks reserved by
 * the media topology.
 */

/*
 * The data at the end of a file or directory may be a fragment in order
 * to optimize storage efficiency.  The minimum fragment size is 1KB.
 * Since allocations are in powers of 2 fragments must also be sized in
 * powers of 2 (1024, 2048, ... 65536).
 *
 * For the moment the maximum allocation size is HAMMER2_PBUFSIZE (64K),
 * which is 2^16.  Larger extents may be supported in the future.  Smaller
 * fragments might be supported in the future (down to 64 bytes is possible),
 * but probably will not be.
 *
 * A full indirect block use supports 512 x 128-byte blockrefs in a 64KB
 * buffer.  Indirect blocks down to 1KB are supported to keep small
 * directories small.
 *
 * A maximally sized file (2^64-1 bytes) requires ~6 indirect block levels
 * using 64KB indirect blocks (128 byte refs, 512 or radix 9 per indblk).
 *
 *      16(datablk) + 9 + 9 + 9 + 9 + 9 + 9 = ~70.
 *      16(datablk) + 7 + 9 + 9 + 9 + 9 + 9 = ~68.  (smaller top level indblk)
 *
 * The actual depth depends on copies redundancy and whether the filesystem
 * has chosen to use a smaller indirect block size at the top level or not.
 */
#define HAMMER2_ALLOC_MIN       1024    /* minimum allocation size */
#define HAMMER2_RADIX_MIN       10      /* minimum allocation size 2^N */
#define HAMMER2_ALLOC_MAX       65536   /* maximum allocation size */
#define HAMMER2_RADIX_MAX       16      /* maximum allocation size 2^N */
#define HAMMER2_RADIX_KEY       64      /* number of bits in key */

/*
 * MINALLOCSIZE         - The minimum allocation size.  This can be smaller
 *                        or larger than the minimum physical IO size.
 *
 *                        NOTE: Should not be larger than 1K since inodes
 *                              are 1K.
 *
 * MINIOSIZE            - The minimum IO size.  This must be less than
 *                        or equal to HAMMER2_LBUFSIZE.
 *
 * HAMMER2_LBUFSIZE     - Nominal buffer size for I/O rollups.
 *
 * HAMMER2_PBUFSIZE     - Topological block size used by files for all
 *                        blocks except the block straddling EOF.
 *
 * HAMMER2_SEGSIZE      - Allocation map segment size, typically 2MB
 *                        (space represented by a level0 bitmap).
 */

#define HAMMER2_SEGSIZE         (1 << HAMMER2_FREEMAP_LEVEL0_RADIX)
#define HAMMER2_SEGRADIX        HAMMER2_FREEMAP_LEVEL0_RADIX

#define HAMMER2_PBUFRADIX       16      /* physical buf (1<<16) bytes */
#define HAMMER2_PBUFSIZE        65536
#define HAMMER2_LBUFRADIX       14      /* logical buf (1<<14) bytes */
#define HAMMER2_LBUFSIZE        16384

/*
 * Generally speaking we want to use 16K and 64K I/Os
 */
#define HAMMER2_MINIORADIX      HAMMER2_LBUFRADIX
#define HAMMER2_MINIOSIZE       HAMMER2_LBUFSIZE

#define HAMMER2_IND_BYTES_MIN   4096
#define HAMMER2_IND_BYTES_NOM   HAMMER2_LBUFSIZE
#define HAMMER2_IND_BYTES_MAX   HAMMER2_PBUFSIZE
#define HAMMER2_IND_RADIX_MIN   12
#define HAMMER2_IND_RADIX_NOM   HAMMER2_LBUFRADIX
#define HAMMER2_IND_RADIX_MAX   HAMMER2_PBUFRADIX
#define HAMMER2_IND_COUNT_MIN   (HAMMER2_IND_BYTES_MIN / \
                                 sizeof(hammer2_blockref_t))
#define HAMMER2_IND_COUNT_MAX   (HAMMER2_IND_BYTES_MAX / \
                                 sizeof(hammer2_blockref_t))

/*
 * In HAMMER2, arrays of blockrefs are fully set-associative, meaning that
 * any element can occur at any index and holes can be anywhere.  As a
 * future optimization we will be able to flag that such arrays are sorted
 * and thus optimize lookups, but for now we don't.
 *
 * Inodes embed either 512 bytes of direct data or an array of 8 blockrefs,
 * resulting in highly efficient storage for files <= 512 bytes and for files
 * <= 512KB.  Up to 8 directory entries can be referenced from a directory
 * without requiring an indirect block.
 *
 * Indirect blocks are typically either 4KB (64 blockrefs / ~4MB represented),
 * or 64KB (1024 blockrefs / ~64MB represented).
 */
#define HAMMER2_SET_RADIX               2       /* radix 2 = 4 entries */
#define HAMMER2_SET_COUNT               (1 << HAMMER2_SET_RADIX)
#define HAMMER2_EMBEDDED_BYTES          512     /* inode blockset/dd size */
#define HAMMER2_EMBEDDED_RADIX          9

#define HAMMER2_PBUFMASK        (HAMMER2_PBUFSIZE - 1)
#define HAMMER2_LBUFMASK        (HAMMER2_LBUFSIZE - 1)
#define HAMMER2_SEGMASK         (HAMMER2_SEGSIZE - 1)

#define HAMMER2_LBUFMASK64      ((hammer2_off_t)HAMMER2_LBUFMASK)
#define HAMMER2_PBUFSIZE64      ((hammer2_off_t)HAMMER2_PBUFSIZE)
#define HAMMER2_PBUFMASK64      ((hammer2_off_t)HAMMER2_PBUFMASK)
#define HAMMER2_SEGSIZE64       ((hammer2_off_t)HAMMER2_SEGSIZE)
#define HAMMER2_SEGMASK64       ((hammer2_off_t)HAMMER2_SEGMASK)

#define HAMMER2_UUID_STRING     "5cbb9ad1-862d-11dc-a94d-01301bb8a9f5"

/*
 * A HAMMER2 filesystem is always sized in multiples of 8MB.
 *
 * A 4MB segment is reserved at the beginning of each 2GB zone.  This segment
 * contains the volume header (or backup volume header), the free block
 * table, and possibly other information in the future.
 *
 * 4MB = 64 x 64K blocks.  Each 4MB segment is broken down as follows:
 *
 *      +-----------------------+
 *      |       Volume Hdr      | block 0       volume header & alternates
 *      +-----------------------+               (first four zones only)
 *      |   FreeBlk Section A   | block 1-4
 *      +-----------------------+
 *      |   FreeBlk Section B   | block 5-8
 *      +-----------------------+
 *      |   FreeBlk Section C   | block 9-12
 *      +-----------------------+
 *      |   FreeBlk Section D   | block 13-16
 *      +-----------------------+
 *      |                       | block 17...63
 *      |       reserved        |
 *      |                       |
 *      +-----------------------+
 *
 * The first few 2GB zones contain volume headers and volume header backups.
 * After that the volume header block# is reserved for future use.  Similarly,
 * there are many blocks related to various Freemap levels which are not
 * used in every segment and those are also reserved for future use.
 *
 *                      Freemap (see the FREEMAP document)
 *
 * The freemap utilizes blocks #1-16 in 8 sets of 4 blocks.  Each block in
 * a set represents a level of depth in the freemap topology.  Eight sets
 * exist to prevent live updates from disturbing the state of the freemap
 * were a crash/reboot to occur.  That is, a live update is not committed
 * until the update's flush reaches the volume root.  There are FOUR volume
 * roots representing the last four synchronization points, so the freemap
 * must be consistent no matter which volume root is chosen by the mount
 * code.
 *
 * Each freemap set is 4 x 64K blocks and represents the 2GB, 2TB, 2PB,
 * and 2EB indirect map.  The volume header itself has a set of 8 freemap
 * blockrefs representing another 3 bits, giving us a total 64 bits of
 * representable address space.
 *
 * The Level 0 64KB block represents 2GB of storage represented by
 * (64 x struct hammer2_bmap_data).  Each structure represents 2MB of storage
 * and has a 256 bit bitmap, using 2 bits to represent a 16KB chunk of
 * storage.  These 2 bits represent the following states:
 *
 *      00      Free
 *      01      (reserved) (Possibly partially allocated)
 *      10      Possibly free
 *      11      Allocated
 *
 * One important thing to note here is that the freemap resolution is 16KB,
 * but the minimum storage allocation size is 1KB.  The hammer2 vfs keeps
 * track of sub-allocations in memory, which means that on a unmount or reboot
 * the entire 16KB of a partially allocated block will be considered fully
 * allocated.  It is possible for fragmentation to build up over time, but
 * defragmentation is fairly easy to accomplish since all modifications
 * allocate a new block.
 *
 * The Second thing to note is that due to the way snapshots and inode
 * replication works, deleting a file cannot immediately free the related
 * space.  Furthermore, deletions often do not bother to traverse the
 * block subhierarchy being deleted.  And to go even further, whole
 * sub-directory trees can be deleted simply by deleting the directory inode
 * at the top.  So even though we have a symbol to represent a 'possibly free'
 * block (binary 10), only the bulk free scanning code can actually use it.
 * Normal 'rm's or other deletions do not.
 *
 * WARNING!  ZONE_SEG and VOLUME_ALIGN must be a multiple of 1<<LEVEL0_RADIX
 *           (i.e. a multiple of 2MB).  VOLUME_ALIGN must be >= ZONE_SEG.
 *
 * In Summary:
 *
 * (1) Modifications to freemap blocks 'allocate' a new copy (aka use a block
 *     from the next set).  The new copy is reused until a flush occurs at
 *     which point the next modification will then rotate to the next set.
 *
 * (2) A total of 10 freemap sets is required.
 *
 *     - 8 sets - 2 sets per volume header backup x 4 volume header backups
 *     - 2 sets used as backing store for the bulk freemap scan.
 *     - The freemap recovery scan which runs on-mount just uses the inactive
 *       set for whichever volume header was selected by the mount code.
 *
 */
#define HAMMER2_VOLUME_ALIGN            (8 * 1024 * 1024)
#define HAMMER2_VOLUME_ALIGN64          ((hammer2_off_t)HAMMER2_VOLUME_ALIGN)
#define HAMMER2_VOLUME_ALIGNMASK        (HAMMER2_VOLUME_ALIGN - 1)
#define HAMMER2_VOLUME_ALIGNMASK64     ((hammer2_off_t)HAMMER2_VOLUME_ALIGNMASK)

#define HAMMER2_NEWFS_ALIGN             (HAMMER2_VOLUME_ALIGN)
#define HAMMER2_NEWFS_ALIGN64           ((hammer2_off_t)HAMMER2_VOLUME_ALIGN)
#define HAMMER2_NEWFS_ALIGNMASK         (HAMMER2_VOLUME_ALIGN - 1)
#define HAMMER2_NEWFS_ALIGNMASK64       ((hammer2_off_t)HAMMER2_NEWFS_ALIGNMASK)

#define HAMMER2_ZONE_BYTES64            (2LLU * 1024 * 1024 * 1024)
#define HAMMER2_ZONE_MASK64             (HAMMER2_ZONE_BYTES64 - 1)
#define HAMMER2_ZONE_SEG                (4 * 1024 * 1024)
#define HAMMER2_ZONE_SEG64              ((hammer2_off_t)HAMMER2_ZONE_SEG)
#define HAMMER2_ZONE_BLOCKS_SEG         (HAMMER2_ZONE_SEG / HAMMER2_PBUFSIZE)

#define HAMMER2_ZONE_FREEMAP_INC        5       /* 5 deep */

#define HAMMER2_ZONE_VOLHDR             0       /* volume header or backup */
#define HAMMER2_ZONE_FREEMAP_00         1       /* normal freemap rotation */
#define HAMMER2_ZONE_FREEMAP_01         6       /* normal freemap rotation */
#define HAMMER2_ZONE_FREEMAP_02         11      /* normal freemap rotation */
#define HAMMER2_ZONE_FREEMAP_03         16      /* normal freemap rotation */
#define HAMMER2_ZONE_FREEMAP_04         21      /* normal freemap rotation */
#define HAMMER2_ZONE_FREEMAP_05         26      /* normal freemap rotation */
#define HAMMER2_ZONE_FREEMAP_06         31      /* normal freemap rotation */
#define HAMMER2_ZONE_FREEMAP_07         36      /* normal freemap rotation */
#define HAMMER2_ZONE_FREEMAP_END        41      /* (non-inclusive) */

#define HAMMER2_ZONE_UNUSED41           41
#define HAMMER2_ZONE_UNUSED42           42
#define HAMMER2_ZONE_UNUSED43           43
#define HAMMER2_ZONE_UNUSED44           44
#define HAMMER2_ZONE_UNUSED45           45
#define HAMMER2_ZONE_UNUSED46           46
#define HAMMER2_ZONE_UNUSED47           47
#define HAMMER2_ZONE_UNUSED48           48
#define HAMMER2_ZONE_UNUSED49           49
#define HAMMER2_ZONE_UNUSED50           50
#define HAMMER2_ZONE_UNUSED51           51
#define HAMMER2_ZONE_UNUSED52           52
#define HAMMER2_ZONE_UNUSED53           53
#define HAMMER2_ZONE_UNUSED54           54
#define HAMMER2_ZONE_UNUSED55           55
#define HAMMER2_ZONE_UNUSED56           56
#define HAMMER2_ZONE_UNUSED57           57
#define HAMMER2_ZONE_UNUSED58           58
#define HAMMER2_ZONE_UNUSED59           59
#define HAMMER2_ZONE_UNUSED60           60
#define HAMMER2_ZONE_UNUSED61           61
#define HAMMER2_ZONE_UNUSED62           62
#define HAMMER2_ZONE_UNUSED63           63
#define HAMMER2_ZONE_END                64      /* non-inclusive */

#define HAMMER2_NFREEMAPS               8       /* FREEMAP_00 - FREEMAP_07 */

                                                /* relative to FREEMAP_x */
#define HAMMER2_ZONEFM_LEVEL1           0       /* 1GB leafmap */
#define HAMMER2_ZONEFM_LEVEL2           1       /* 256GB indmap */
#define HAMMER2_ZONEFM_LEVEL3           2       /* 64TB indmap */
#define HAMMER2_ZONEFM_LEVEL4           3       /* 16PB indmap */
#define HAMMER2_ZONEFM_LEVEL5           4       /* 4EB indmap */
/* LEVEL6 is a set of 4 blockrefs in the volume header 16EB */

/*
 * Freemap radix.  Assumes a set-count of 4, 128-byte blockrefs,
 * 32KB indirect block for freemap (LEVELN_PSIZE below).
 *
 * Leaf entry represents 4MB of storage broken down into a 512-bit
 * bitmap, 2-bits per entry.  So course bitmap item represents 16KB.
 */
#if HAMMER2_SET_COUNT != 4
#error "hammer2_disk.h - freemap assumes SET_COUNT is 4"
#endif
#define HAMMER2_FREEMAP_LEVEL6_RADIX    64      /* 16EB (end) */
#define HAMMER2_FREEMAP_LEVEL5_RADIX    62      /* 4EB */
#define HAMMER2_FREEMAP_LEVEL4_RADIX    54      /* 16PB */
#define HAMMER2_FREEMAP_LEVEL3_RADIX    46      /* 64TB */
#define HAMMER2_FREEMAP_LEVEL2_RADIX    38      /* 256GB */
#define HAMMER2_FREEMAP_LEVEL1_RADIX    30      /* 1GB */
#define HAMMER2_FREEMAP_LEVEL0_RADIX    22      /* 4MB (128by in l-1 leaf) */

#define HAMMER2_FREEMAP_LEVELN_PSIZE    32768   /* physical bytes */

#define HAMMER2_FREEMAP_LEVEL5_SIZE     ((hammer2_off_t)1 <<            \
                                         HAMMER2_FREEMAP_LEVEL5_RADIX)
#define HAMMER2_FREEMAP_LEVEL4_SIZE     ((hammer2_off_t)1 <<            \
                                         HAMMER2_FREEMAP_LEVEL4_RADIX)
#define HAMMER2_FREEMAP_LEVEL3_SIZE     ((hammer2_off_t)1 <<            \
                                         HAMMER2_FREEMAP_LEVEL3_RADIX)
#define HAMMER2_FREEMAP_LEVEL2_SIZE     ((hammer2_off_t)1 <<            \
                                         HAMMER2_FREEMAP_LEVEL2_RADIX)
#define HAMMER2_FREEMAP_LEVEL1_SIZE     ((hammer2_off_t)1 <<            \
                                         HAMMER2_FREEMAP_LEVEL1_RADIX)
#define HAMMER2_FREEMAP_LEVEL0_SIZE     ((hammer2_off_t)1 <<            \
                                         HAMMER2_FREEMAP_LEVEL0_RADIX)

#define HAMMER2_FREEMAP_LEVEL5_MASK     (HAMMER2_FREEMAP_LEVEL5_SIZE - 1)
#define HAMMER2_FREEMAP_LEVEL4_MASK     (HAMMER2_FREEMAP_LEVEL4_SIZE - 1)
#define HAMMER2_FREEMAP_LEVEL3_MASK     (HAMMER2_FREEMAP_LEVEL3_SIZE - 1)
#define HAMMER2_FREEMAP_LEVEL2_MASK     (HAMMER2_FREEMAP_LEVEL2_SIZE - 1)
#define HAMMER2_FREEMAP_LEVEL1_MASK     (HAMMER2_FREEMAP_LEVEL1_SIZE - 1)
#define HAMMER2_FREEMAP_LEVEL0_MASK     (HAMMER2_FREEMAP_LEVEL0_SIZE - 1)

#define HAMMER2_FREEMAP_COUNT           (int)(HAMMER2_FREEMAP_LEVELN_PSIZE / \
                                         sizeof(hammer2_bmap_data_t))

/*
 * 16KB bitmap granularity (x2 bits per entry).
 */
#define HAMMER2_FREEMAP_BLOCK_RADIX     14
#define HAMMER2_FREEMAP_BLOCK_SIZE      (1 << HAMMER2_FREEMAP_BLOCK_RADIX)
#define HAMMER2_FREEMAP_BLOCK_MASK      (HAMMER2_FREEMAP_BLOCK_SIZE - 1)

/*
 * bitmap[] structure.  2 bits per HAMMER2_FREEMAP_BLOCK_SIZE.
 *
 * 8 x 64-bit elements, 2 bits per block.
 * 32 blocks (radix 5) per element.
 * representing INDEX_SIZE bytes worth of storage per element.
 */

typedef uint64_t                        hammer2_bitmap_t;

#define HAMMER2_BMAP_ALLONES            ((hammer2_bitmap_t)-1)
#define HAMMER2_BMAP_ELEMENTS           8
#define HAMMER2_BMAP_BITS_PER_ELEMENT   64
#define HAMMER2_BMAP_INDEX_RADIX        5       /* 32 blocks per element */
#define HAMMER2_BMAP_BLOCKS_PER_ELEMENT (1 << HAMMER2_BMAP_INDEX_RADIX)

#define HAMMER2_BMAP_INDEX_SIZE         (HAMMER2_FREEMAP_BLOCK_SIZE * \
                                         HAMMER2_BMAP_BLOCKS_PER_ELEMENT)
#define HAMMER2_BMAP_INDEX_MASK         (HAMMER2_BMAP_INDEX_SIZE - 1)

/*
 * Two linear areas can be reserved after the initial 2MB segment in the base
 * zone (the one starting at offset 0).  These areas are NOT managed by the
 * block allocator and do not fall under HAMMER2 crc checking rules based
 * at the volume header (but can be self-CRCd internally, depending).
 */
#define HAMMER2_BOOT_MIN_BYTES          HAMMER2_VOLUME_ALIGN
#define HAMMER2_BOOT_NOM_BYTES          (64*1024*1024)
#define HAMMER2_BOOT_MAX_BYTES          (256*1024*1024)

#define HAMMER2_REDO_MIN_BYTES          HAMMER2_VOLUME_ALIGN
#define HAMMER2_REDO_NOM_BYTES          (256*1024*1024)
#define HAMMER2_REDO_MAX_BYTES          (1024*1024*1024)

/*
 * Most HAMMER2 types are implemented as unsigned 64-bit integers.
 * Transaction ids are monotonic.
 *
 * We utilize 32-bit iSCSI CRCs.
 */
typedef uint64_t hammer2_tid_t;
typedef uint64_t hammer2_off_t;
typedef uint64_t hammer2_key_t;
typedef uint32_t hammer2_crc32_t;

/*
 * Miscellanious ranges (all are unsigned).
 */
#define HAMMER2_TID_MIN         1ULL
#define HAMMER2_TID_MAX         0xFFFFFFFFFFFFFFFFULL
#define HAMMER2_KEY_MIN         0ULL
#define HAMMER2_KEY_MAX         0xFFFFFFFFFFFFFFFFULL
#define HAMMER2_OFFSET_MIN      0ULL
#define HAMMER2_OFFSET_MAX      0xFFFFFFFFFFFFFFFFULL

/*
 * HAMMER2 data offset special cases and masking.
 *
 * All HAMMER2 data offsets have to be broken down into a 64K buffer base
 * offset (HAMMER2_OFF_MASK_HI) and a 64K buffer index (HAMMER2_OFF_MASK_LO).
 *
 * Indexes into physical buffers are always 64-byte aligned.  The low 6 bits
 * of the data offset field specifies how large the data chunk being pointed
 * to as a power of 2.  The theoretical minimum radix is thus 6 (The space
 * needed in the low bits of the data offset field).  However, the practical
 * minimum allocation chunk size is 1KB (a radix of 10), so HAMMER2 sets
 * HAMMER2_RADIX_MIN to 10.  The maximum radix is currently 16 (64KB), but
 * we fully intend to support larger extents in the future.
 *
 * WARNING! A radix of 0 (such as when data_off is all 0's) is a special
 *          case which means no data associated with the blockref, and
 *          not the '1 byte' it would otherwise calculate to.
 */
#define HAMMER2_OFF_BAD         ((hammer2_off_t)-1)
#define HAMMER2_OFF_MASK        0xFFFFFFFFFFFFFFC0ULL
#define HAMMER2_OFF_MASK_LO     (HAMMER2_OFF_MASK & HAMMER2_PBUFMASK64)
#define HAMMER2_OFF_MASK_HI     (~HAMMER2_PBUFMASK64)
#define HAMMER2_OFF_MASK_RADIX  0x000000000000003FULL
#define HAMMER2_MAX_COPIES      6

/*
 * HAMMER2 directory support and pre-defined keys
 */
#define HAMMER2_DIRHASH_VISIBLE 0x8000000000000000ULL
#define HAMMER2_DIRHASH_USERMSK 0x7FFFFFFFFFFFFFFFULL
#define HAMMER2_DIRHASH_LOMASK  0x0000000000007FFFULL
#define HAMMER2_DIRHASH_HIMASK  0xFFFFFFFFFFFF0000ULL
#define HAMMER2_DIRHASH_FORCED  0x0000000000008000ULL   /* bit forced on */

#define HAMMER2_SROOT_KEY       0x0000000000000000ULL   /* volume to sroot */
#define HAMMER2_BOOT_KEY        0xd9b36ce135528000ULL   /* sroot to BOOT PFS */

/************************************************************************
 *                              DMSG SUPPORT                            *
 ************************************************************************
 * LNK_VOLCONF
 *
 * All HAMMER2 directories directly under the super-root on your local
 * media can be mounted separately, even if they share the same physical
 * device.
 *
 * When you do a HAMMER2 mount you are effectively tying into a HAMMER2
 * cluster via local media.  The local media does not have to participate
 * in the cluster, other than to provide the hammer2_volconf[] array and
 * root inode for the mount.
 *
 * This is important: The mount device path you specify serves to bootstrap
 * your entry into the cluster, but your mount will make active connections
 * to ALL copy elements in the hammer2_volconf[] array which match the
 * PFSID of the directory in the super-root that you specified.  The local
 * media path does not have to be mentioned in this array but becomes part
 * of the cluster based on its type and access rights.  ALL ELEMENTS ARE
 * TREATED ACCORDING TO TYPE NO MATTER WHICH ONE YOU MOUNT FROM.
 *
 * The actual cluster may be far larger than the elements you list in the
 * hammer2_volconf[] array.  You list only the elements you wish to
 * directly connect to and you are able to access the rest of the cluster
 * indirectly through those connections.
 *
 * WARNING!  This structure must be exactly 128 bytes long for its config
 *           array to fit in the volume header.
 */
struct hammer2_volconf {
        uint8_t copyid;         /* 00    copyid 0-255 (must match slot) */
        uint8_t inprog;         /* 01    operation in progress, or 0 */
        uint8_t chain_to;       /* 02    operation chaining to, or 0 */
        uint8_t chain_from;     /* 03    operation chaining from, or 0 */
        uint16_t flags;         /* 04-05 flags field */
        uint8_t error;          /* 06    last operational error */
        uint8_t priority;       /* 07    priority and round-robin flag */
        uint8_t remote_pfs_type;/* 08    probed direct remote PFS type */
        uint8_t reserved08[23]; /* 09-1F */
        uuid_t  pfs_clid;       /* 20-2F copy target must match this uuid */
        uint8_t label[16];      /* 30-3F import/export label */
        uint8_t path[64];       /* 40-7F target specification string or key */
} __packed;

typedef struct hammer2_volconf hammer2_volconf_t;

#define DMSG_VOLF_ENABLED       0x0001
#define DMSG_VOLF_INPROG        0x0002
#define DMSG_VOLF_CONN_RR       0x80    /* round-robin at same priority */
#define DMSG_VOLF_CONN_EF       0x40    /* media errors flagged */
#define DMSG_VOLF_CONN_PRI      0x0F    /* select priority 0-15 (15=best) */

struct dmsg_lnk_hammer2_volconf {
        dmsg_hdr_t              head;
        hammer2_volconf_t       copy;   /* copy spec */
        int32_t                 index;
        int32_t                 unused01;
        uuid_t                  mediaid;
        int64_t                 reserved02[32];
} __packed;

typedef struct dmsg_lnk_hammer2_volconf dmsg_lnk_hammer2_volconf_t;

#define DMSG_LNK_HAMMER2_VOLCONF DMSG_LNK(DMSG_LNK_CMD_HAMMER2_VOLCONF, \
                                          dmsg_lnk_hammer2_volconf)

#define H2_LNK_VOLCONF(msg)     ((dmsg_lnk_hammer2_volconf_t *)(msg)->any.buf)

/*
 * HAMMER2 directory entry header (embedded in blockref)  exactly 16 bytes
 */
struct hammer2_dirent_head {
        hammer2_tid_t           inum;           /* inode number */
        uint16_t                namlen;         /* name length */
        uint8_t                 type;           /* OBJTYPE_*    */
        uint8_t                 unused0B;
        uint8_t                 unused0C[4];
} __packed;

typedef struct hammer2_dirent_head hammer2_dirent_head_t;

/*
 * The media block reference structure.  This forms the core of the HAMMER2
 * media topology recursion.  This 128-byte data structure is embedded in the
 * volume header, in inodes (which are also directory entries), and in
 * indirect blocks.
 *
 * A blockref references a single media item, which typically can be a
 * directory entry (aka inode), indirect block, or data block.
 *
 * The primary feature a blockref represents is the ability to validate
 * the entire tree underneath it via its check code.  Any modification to
 * anything propagates up the blockref tree all the way to the root, replacing
 * the related blocks and compounding the generated check code.
 *
 * The check code can be a simple 32-bit iscsi code, a 64-bit crc, or as
 * complex as a 512 bit cryptographic hash.  I originally used a 64-byte
 * blockref but later expanded it to 128 bytes to be able to support the
 * larger check code as well as to embed statistics for quota operation.
 *
 * Simple check codes are not sufficient for unverified dedup.  Even with
 * a maximally-sized check code unverified dedup should only be used in
 * in subdirectory trees where you do not need 100% data integrity.
 *
 * Unverified dedup is deduping based on meta-data only without verifying
 * that the data blocks are actually identical.  Verified dedup guarantees
 * integrity but is a far more I/O-expensive operation.
 *
 * --
 *
 * mirror_tid - per cluster node modified (propagated upward by flush)
 * modify_tid - clc record modified (not propagated).
 * update_tid - clc record updated (propagated upward on verification)
 *
 * CLC - Stands for 'Cluster Level Change', identifiers which are identical
 *       within the topology across all cluster nodes (when fully
 *       synchronized).
 *
 * NOTE: The range of keys represented by the blockref is (key) to
 *       ((key) + (1LL << keybits) - 1).  HAMMER2 usually populates
 *       blocks bottom-up, inserting a new root when radix expansion
 *       is required.
 *
 *                                  RESERVED FIELDS
 *
 * A number of blockref fields are reserved and should generally be set to
 * 0 for future compatibility.
 *
 *                              FUTURE BLOCKREF EXPANSION
 *
 * CONTENT ADDRESSABLE INDEXING (future) - Using a 256 or 512-bit check code.
 */
struct hammer2_blockref {               /* MUST BE EXACTLY 64 BYTES */
        uint8_t         type;           /* type of underlying item */
        uint8_t         methods;        /* check method & compression method */
        uint8_t         copyid;         /* specify which copy this is */
        uint8_t         keybits;        /* #of keybits masked off 0=leaf */
        uint8_t         vradix;         /* virtual data/meta-data size */
        uint8_t         flags;          /* blockref flags */
        uint8_t         reserved06;
        uint8_t         reserved07;
        hammer2_key_t   key;            /* key specification */
        hammer2_tid_t   mirror_tid;     /* media flush topology & freemap */
        hammer2_tid_t   modify_tid;     /* clc modify (not propagated) */
        hammer2_off_t   data_off;       /* low 6 bits is phys size (radix)*/
        hammer2_tid_t   update_tid;     /* clc modify (propagated upward) */
        union {
                char    buf[16];

                /*
                 * Directory entry header (BREF_TYPE_DIRENT)
                 *
                 * NOTE: check.buf contains filename if <= 64 bytes.  Longer
                 *       filenames are stored in a data reference of size
                 *       HAMMER2_ALLOC_MIN (at least 256, typically 1024).
                 *
                 * NOTE: inode structure may contain a copy of a recently
                 *       associated filename, for recovery purposes.
                 *
                 * NOTE: Superroot entries are INODEs, not DIRENTs.  Code
                 *       allows both cases.
                 */
                hammer2_dirent_head_t dirent;

                /*
                 * Statistics aggregation (BREF_TYPE_INODE, BREF_TYPE_INDIRECT)
                 */
                struct {
                        hammer2_key_t   data_count;
                        hammer2_key_t   inode_count;
                } stats;
        } embed;
        union {                         /* check info */
                char    buf[64];
                struct {
                        uint32_t value;
                        uint32_t reserved[15];
                } iscsi32;
                struct {
                        uint64_t value;
                        uint64_t reserved[7];
                } xxhash64;
                struct {
                        char data[24];
                        char reserved[40];
                } sha192;
                struct {
                        char data[32];
                        char reserved[32];
                } sha256;
                struct {
                        char data[64];
                } sha512;

                /*
                 * Freemap hints are embedded in addition to the icrc32.
                 *
                 * bigmask - Radixes available for allocation (0-31).
                 *           Heuristical (may be permissive but not
                 *           restrictive).  Typically only radix values
                 *           10-16 are used (i.e. (1<<10) through (1<<16)).
                 *
                 * avail   - Total available space remaining, in bytes
                 */
                struct {
                        uint32_t icrc32;
                        uint32_t bigmask;       /* available radixes */
                        uint64_t avail;         /* total available bytes */
                        char reserved[48];
                } freemap;
        } check;
} __packed;

typedef struct hammer2_blockref hammer2_blockref_t;

#define HAMMER2_BLOCKREF_BYTES          128     /* blockref struct in bytes */
#define HAMMER2_BLOCKREF_RADIX          7

/*
 * On-media and off-media blockref types.
 *
 * types >= 128 are pseudo values that should never be present on-media.
 */
#define HAMMER2_BREF_TYPE_EMPTY         0
#define HAMMER2_BREF_TYPE_INODE         1
#define HAMMER2_BREF_TYPE_INDIRECT      2
#define HAMMER2_BREF_TYPE_DATA          3
#define HAMMER2_BREF_TYPE_DIRENT        4
#define HAMMER2_BREF_TYPE_FREEMAP_NODE  5
#define HAMMER2_BREF_TYPE_FREEMAP_LEAF  6
#define HAMMER2_BREF_TYPE_FREEMAP       254     /* pseudo-type */
#define HAMMER2_BREF_TYPE_VOLUME        255     /* pseudo-type */

#define HAMMER2_BREF_FLAG_PFSROOT       0x01    /* see also related opflag */
#define HAMMER2_BREF_FLAG_ZERO          0x02

/*
 * Encode/decode check mode and compression mode for
 * bref.methods.  The compression level is not encoded in
 * bref.methods.
 */
#define HAMMER2_ENC_CHECK(n)            (((n) & 15) << 4)
#define HAMMER2_DEC_CHECK(n)            (((n) >> 4) & 15)
#define HAMMER2_ENC_COMP(n)             ((n) & 15)
#define HAMMER2_DEC_COMP(n)             ((n) & 15)

#define HAMMER2_CHECK_NONE              0
#define HAMMER2_CHECK_DISABLED          1
#define HAMMER2_CHECK_ISCSI32           2
#define HAMMER2_CHECK_XXHASH64          3
#define HAMMER2_CHECK_SHA192            4
#define HAMMER2_CHECK_FREEMAP           5

#define HAMMER2_CHECK_DEFAULT           HAMMER2_CHECK_XXHASH64

/* user-specifiable check modes only */
#define HAMMER2_CHECK_STRINGS           { "none", "disabled", "crc32", \
                                          "xxhash64", "sha192" }
#define HAMMER2_CHECK_STRINGS_COUNT     5

/*
 * Encode/decode check or compression algorithm request in
 * ipdata->meta.check_algo and ipdata->meta.comp_algo.
 */
#define HAMMER2_ENC_ALGO(n)             (n)
#define HAMMER2_DEC_ALGO(n)             ((n) & 15)
#define HAMMER2_ENC_LEVEL(n)            ((n) << 4)
#define HAMMER2_DEC_LEVEL(n)            (((n) >> 4) & 15)

#define HAMMER2_COMP_NONE               0
#define HAMMER2_COMP_AUTOZERO           1
#define HAMMER2_COMP_LZ4                2
#define HAMMER2_COMP_ZLIB               3

#define HAMMER2_COMP_NEWFS_DEFAULT      HAMMER2_COMP_LZ4
#define HAMMER2_COMP_STRINGS            { "none", "autozero", "lz4", "zlib" }
#define HAMMER2_COMP_STRINGS_COUNT      4

/*
 * Passed to hammer2_chain_create(), causes methods to be inherited from
 * parent.
 */
#define HAMMER2_METH_DEFAULT            -1

/*
 * HAMMER2 block references are collected into sets of 4 blockrefs.  These
 * sets are fully associative, meaning the elements making up a set are
 * not sorted in any way and may contain duplicate entries, holes, or
 * entries which shortcut multiple levels of indirection.  Sets are used
 * in various ways:
 *
 * (1) When redundancy is desired a set may contain several duplicate
 *     entries pointing to different copies of the same data.  Up to 4 copies
 *     are supported.
 *
 * (2) The blockrefs in a set can shortcut multiple levels of indirections
 *     within the bounds imposed by the parent of set.
 *
 * When a set fills up another level of indirection is inserted, moving
 * some or all of the set's contents into indirect blocks placed under the
 * set.  This is a top-down approach in that indirect blocks are not created
 * until the set actually becomes full (that is, the entries in the set can
 * shortcut the indirect blocks when the set is not full).  Depending on how
 * things are filled multiple indirect blocks will eventually be created.
 *
 * Indirect blocks are typically 4KB (64 entres) or 64KB (1024 entries) and
 * are also treated as fully set-associative.
 */
struct hammer2_blockset {
        hammer2_blockref_t      blockref[HAMMER2_SET_COUNT];
};

typedef struct hammer2_blockset hammer2_blockset_t;

/*
 * Catch programmer snafus
 */
#if (1 << HAMMER2_SET_RADIX) != HAMMER2_SET_COUNT
#error "hammer2 direct radix is incorrect"
#endif
#if (1 << HAMMER2_PBUFRADIX) != HAMMER2_PBUFSIZE
#error "HAMMER2_PBUFRADIX and HAMMER2_PBUFSIZE are inconsistent"
#endif
#if (1 << HAMMER2_RADIX_MIN) != HAMMER2_ALLOC_MIN
#error "HAMMER2_RADIX_MIN and HAMMER2_ALLOC_MIN are inconsistent"
#endif

/*
 * hammer2_bmap_data - A freemap entry in the LEVEL1 block.
 *
 * Each 128-byte entry contains the bitmap and meta-data required to manage
 * a LEVEL0 (128KB) block of storage.  The storage is managed in 128 x 1KB
 * chunks.
 *
 * A smaller allocation granularity is supported via a linear iterator and/or
 * must otherwise be tracked in ram.
 *
 * (data structure must be 128 bytes exactly)
 *
 * linear  - A BYTE linear allocation offset used for sub-16KB allocations
 *           only.  May contain values between 0 and 2MB.  Must be ignored
 *           if 16KB-aligned (i.e. force bitmap scan), otherwise may be
 *           used to sub-allocate within the 16KB block (which is already
 *           marked as allocated in the bitmap).
 *
 *           Sub-allocations need only be 1KB-aligned and do not have to be
 *           size-aligned, and 16KB or larger allocations do not update this
 *           field, resulting in pretty good packing.
 *
 *           Please note that file data granularity may be limited by
 *           other issues such as buffer cache direct-mapping and the
 *           desire to support sector sizes up to 16KB (so H2 only issues
 *           I/O's in multiples of 16KB anyway).
 *
 * class   - Clustering class.  Cleared to 0 only if the entire leaf becomes
 *           free.  Used to cluster device buffers so all elements must have
 *           the same device block size, but may mix logical sizes.
 *
 *           Typically integrated with the blockref type in the upper 8 bits
 *           to localize inodes and indrect blocks, improving bulk free scans
 *           and directory scans.
 *
 * bitmap  - Two bits per 16KB allocation block arranged in arrays of
 *           32-bit elements, 256x2 bits representing ~4MB worth of media
 *           storage.  Bit patterns are as follows:
 *
 *           00 Unallocated
 *           01 (reserved)
 *           10 Possibly free
 *           11 Allocated
 */
struct hammer2_bmap_data {
        int32_t linear;         /* 00 linear sub-granular allocation offset */
        uint16_t class;         /* 04-05 clustering class ((type<<8)|radix) */
        uint8_t reserved06;     /* 06 */
        uint8_t reserved07;     /* 07 */
        uint32_t reserved08;    /* 08 */
        uint32_t reserved0C;    /* 0C */
        uint32_t reserved10;    /* 10 */
        uint32_t reserved14;    /* 14 */
        uint32_t reserved18;    /* 18 */
        uint32_t avail;         /* 1C */
        uint32_t reserved20[8]; /* 20-3F 256 bits manages 128K/1KB/2-bits */
                                /* 40-7F 512 bits manages 4MB of storage */
        hammer2_bitmap_t bitmapq[HAMMER2_BMAP_ELEMENTS];
} __packed;

typedef struct hammer2_bmap_data hammer2_bmap_data_t;

/*
 * In HAMMER2 inodes ARE directory entries, with a special exception for
 * hardlinks.  The inode number is stored in the inode rather than being
 * based on the location of the inode (since the location moves every time
 * the inode or anything underneath the inode is modified).
 *
 * The inode is 1024 bytes, made up of 256 bytes of meta-data, 256 bytes
 * for the filename, and 512 bytes worth of direct file data OR an embedded
 * blockset.  The in-memory hammer2_inode structure contains only the mostly-
 * node-independent meta-data portion (some flags are node-specific and will
 * not be synchronized).  The rest of the inode is node-specific and chain I/O
 * is required to obtain it.
 *
 * Directories represent one inode per blockref.  Inodes are not laid out
 * as a file but instead are represented by the related blockrefs.  The
 * blockrefs, in turn, are indexed by the 64-bit directory hash key.  Remember
 * that blocksets are fully associative, so a certain degree efficiency is
 * achieved just from that.
 *
 * Up to 512 bytes of direct data can be embedded in an inode, and since
 * inodes are essentially directory entries this also means that small data
 * files end up simply being laid out linearly in the directory, resulting
 * in fewer seeks and highly optimal access.
 *
 * The compression mode can be changed at any time in the inode and is
 * recorded on a blockref-by-blockref basis.
 *
 * Hardlinks are supported via the inode map.  Essentially the way a hardlink
 * works is that all individual directory entries representing the same file
 * are special cased and specify the same inode number.  The actual file
 * is placed in the nearest parent directory that is parent to all instances
 * of the hardlink.  If all hardlinks to a file are in the same directory
 * the actual file will also be placed in that directory.  This file uses
 * the inode number as the directory entry key and is invisible to normal
 * directory scans.  Real directory entry keys are differentiated from the
 * inode number key via bit 63.  Access to the hardlink silently looks up
 * the real file and forwards all operations to that file.  Removal of the
 * last hardlink also removes the real file.
 *
 * (attr_tid) is only updated when the inode's specific attributes or regular
 * file size has changed, and affects path lookups and stat.  (attr_tid)
 * represents a special cache coherency lock under the inode.  The inode
 * blockref's modify_tid will always cover it.
 *
 * (dirent_tid) is only updated when an entry under a directory inode has
 * been created, deleted, renamed, or had its attributes change, and affects
 * directory lookups and scans.  (dirent_tid) represents another special cache
 * coherency lock under the inode.  The inode blockref's modify_tid will
 * always cover it.
 */
#define HAMMER2_INODE_BYTES             1024    /* (asserted by code) */
#define HAMMER2_INODE_MAXNAME           256     /* maximum name in bytes */
#define HAMMER2_INODE_VERSION_ONE       1

#define HAMMER2_INODE_START             1024    /* dynamically allocated */

struct hammer2_inode_meta {
        uint16_t        version;        /* 0000 inode data version */
        uint8_t         reserved02;     /* 0002 */
        uint8_t         pfs_subtype;    /* 0003 pfs sub-type */

        /*
         * core inode attributes, inode type, misc flags
         */
        uint32_t        uflags;         /* 0004 chflags */
        uint32_t        rmajor;         /* 0008 available for device nodes */
        uint32_t        rminor;         /* 000C available for device nodes */
        uint64_t        ctime;          /* 0010 inode change time */
        uint64_t        mtime;          /* 0018 modified time */
        uint64_t        atime;          /* 0020 access time (unsupported) */
        uint64_t        btime;          /* 0028 birth time */
        uuid_t          uid;            /* 0030 uid / degenerate unix uid */
        uuid_t          gid;            /* 0040 gid / degenerate unix gid */

        uint8_t         type;           /* 0050 object type */
        uint8_t         op_flags;       /* 0051 operational flags */
        uint16_t        cap_flags;      /* 0052 capability flags */
        uint32_t        mode;           /* 0054 unix modes (typ low 16 bits) */

        /*
         * inode size, identification, localized recursive configuration
         * for compression and backup copies.
         *
         * NOTE: Nominal parent inode number (iparent) is only applicable
         *       for directories but can also help for files during
         *       catastrophic recovery.
         */
        hammer2_tid_t   inum;           /* 0058 inode number */
        hammer2_off_t   size;           /* 0060 size of file */
        uint64_t        nlinks;         /* 0068 hard links (typ only dirs) */
        hammer2_tid_t   iparent;        /* 0070 nominal parent inum */
        hammer2_key_t   name_key;       /* 0078 full filename key */
        uint16_t        name_len;       /* 0080 filename length */
        uint8_t         ncopies;        /* 0082 ncopies to local media */
        uint8_t         comp_algo;      /* 0083 compression request & algo */

        /*
         * These fields are currently only applicable to PFSROOTs.
         *
         * NOTE: We can't use {volume_data->fsid, pfs_clid} to uniquely
         *       identify an instance of a PFS in the cluster because
         *       a mount may contain more than one copy of the PFS as
         *       a separate node.  {pfs_clid, pfs_fsid} must be used for
         *       registration in the cluster.
         */
        uint8_t         target_type;    /* 0084 hardlink target type */
        uint8_t         check_algo;     /* 0085 check code request & algo */
        uint8_t         pfs_nmasters;   /* 0086 (if PFSROOT) if multi-master */
        uint8_t         pfs_type;       /* 0087 (if PFSROOT) node type */
        uint64_t        pfs_inum;       /* 0088 (if PFSROOT) inum allocator */
        uuid_t          pfs_clid;       /* 0090 (if PFSROOT) cluster uuid */
        uuid_t          pfs_fsid;       /* 00A0 (if PFSROOT) unique uuid */

        /*
         * Quotas and aggregate sub-tree inode and data counters.  Note that
         * quotas are not replicated downward, they are explicitly set by
         * the sysop and in-memory structures keep track of inheritence.
         */
        hammer2_key_t   data_quota;     /* 00B0 subtree quota in bytes */
        hammer2_key_t   unusedB8;       /* 00B8 subtree byte count */
        hammer2_key_t   inode_quota;    /* 00C0 subtree quota inode count */
        hammer2_key_t   unusedC8;       /* 00C8 subtree inode count */

        /*
         * The last snapshot tid is tested against modify_tid to determine
         * when a copy must be made of a data block whos check mode has been
         * disabled (a disabled check mode allows data blocks to be updated
         * in place instead of copy-on-write).
         */
        hammer2_tid_t   pfs_lsnap_tid;  /* 00D0 last snapshot tid */
        hammer2_tid_t   reservedD8;     /* 00D8 (avail) */

        /*
         * Tracks (possibly degenerate) free areas covering all sub-tree
         * allocations under inode, not counting the inode itself.
         * 0/0 indicates empty entry.  fully set-associative.
         *
         * (not yet implemented)
         */
        uint64_t        decrypt_check;  /* 00E0 decryption validator */
        hammer2_off_t   reservedE0[3];  /* 00E8/F0/F8 */
} __packed;

typedef struct hammer2_inode_meta hammer2_inode_meta_t;

struct hammer2_inode_data {
        hammer2_inode_meta_t    meta;   /* 0000-00FF */
        unsigned char   filename[HAMMER2_INODE_MAXNAME];
                                        /* 0100-01FF (256 char, unterminated) */
        union {                         /* 0200-03FF (64x8 = 512 bytes) */
                struct hammer2_blockset blockset;
                char data[HAMMER2_EMBEDDED_BYTES];
        } u;
} __packed;

typedef struct hammer2_inode_data hammer2_inode_data_t;

#define HAMMER2_OPFLAG_DIRECTDATA       0x01
#define HAMMER2_OPFLAG_PFSROOT          0x02    /* (see also bref flag) */
#define HAMMER2_OPFLAG_COPYIDS          0x04    /* copyids override parent */

#define HAMMER2_OBJTYPE_UNKNOWN         0
#define HAMMER2_OBJTYPE_DIRECTORY       1
#define HAMMER2_OBJTYPE_REGFILE         2
#define HAMMER2_OBJTYPE_FIFO            4
#define HAMMER2_OBJTYPE_CDEV            5
#define HAMMER2_OBJTYPE_BDEV            6
#define HAMMER2_OBJTYPE_SOFTLINK        7
#define HAMMER2_OBJTYPE_UNUSED08        8
#define HAMMER2_OBJTYPE_SOCKET          9
#define HAMMER2_OBJTYPE_WHITEOUT        10

#define HAMMER2_COPYID_NONE             0
#define HAMMER2_COPYID_LOCAL            ((uint8_t)-1)

#define HAMMER2_COPYID_COUNT            256

/*
 * PFS types identify the role of a PFS within a cluster.  The PFS types
 * is stored on media and in LNK_SPAN messages and used in other places.
 *
 * The low 4 bits specify the current active type while the high 4 bits
 * specify the transition target if the PFS is being upgraded or downgraded,
 * If the upper 4 bits are not zero it may effect how a PFS is used during
 * the transition.
 *
 * Generally speaking, downgrading a MASTER to a SLAVE cannot complete until
 * at least all MASTERs have updated their pfs_nmasters field.  And upgrading
 * a SLAVE to a MASTER cannot complete until the new prospective master has
 * been fully synchronized (though theoretically full synchronization is
 * not required if a (new) quorum of other masters are fully synchronized).
 *
 * It generally does not matter which PFS element you actually mount, you
 * are mounting 'the cluster'.  So, for example, a network mount will mount
 * a DUMMY PFS type on a memory filesystem.  However, there are two exceptions.
 * In order to gain the benefits of a SOFT_MASTER or SOFT_SLAVE, those PFSs
 * must be directly mounted.
 */
#define HAMMER2_PFSTYPE_NONE            0x00
#define HAMMER2_PFSTYPE_CACHE           0x01
#define HAMMER2_PFSTYPE_UNUSED02        0x02
#define HAMMER2_PFSTYPE_SLAVE           0x03
#define HAMMER2_PFSTYPE_SOFT_SLAVE      0x04
#define HAMMER2_PFSTYPE_SOFT_MASTER     0x05
#define HAMMER2_PFSTYPE_MASTER          0x06
#define HAMMER2_PFSTYPE_UNUSED07        0x07
#define HAMMER2_PFSTYPE_SUPROOT         0x08
#define HAMMER2_PFSTYPE_DUMMY           0x09
#define HAMMER2_PFSTYPE_MAX             16

#define HAMMER2_PFSTRAN_NONE            0x00    /* no transition in progress */
#define HAMMER2_PFSTRAN_CACHE           0x10
#define HAMMER2_PFSTRAN_UNMUSED20       0x20
#define HAMMER2_PFSTRAN_SLAVE           0x30
#define HAMMER2_PFSTRAN_SOFT_SLAVE      0x40
#define HAMMER2_PFSTRAN_SOFT_MASTER     0x50
#define HAMMER2_PFSTRAN_MASTER          0x60
#define HAMMER2_PFSTRAN_UNUSED70        0x70
#define HAMMER2_PFSTRAN_SUPROOT         0x80
#define HAMMER2_PFSTRAN_DUMMY           0x90

#define HAMMER2_PFS_DEC(n)              ((n) & 0x0F)
#define HAMMER2_PFS_DEC_TRANSITION(n)   (((n) >> 4) & 0x0F)
#define HAMMER2_PFS_ENC_TRANSITION(n)   (((n) & 0x0F) << 4)

#define HAMMER2_PFSSUBTYPE_NONE         0
#define HAMMER2_PFSSUBTYPE_SNAPSHOT     1       /* manual/managed snapshot */
#define HAMMER2_PFSSUBTYPE_AUTOSNAP     2       /* automatic snapshot */

/*
 * PFS mode of operation is a bitmask.  This is typically not stored
 * on-media, but defined here because the field may be used in dmsgs.
 */
#define HAMMER2_PFSMODE_QUORUM          0x01
#define HAMMER2_PFSMODE_RW              0x02

/*
 *                              Allocation Table
 *
 */


/*
 * Flags (8 bits) - blockref, for freemap only
 *
 * Note that the minimum chunk size is 1KB so we could theoretically have
 * 10 bits here, but we might have some future extension that allows a
 * chunk size down to 256 bytes and if so we will need bits 8 and 9.
 */
#define HAMMER2_AVF_SELMASK             0x03    /* select group */
#define HAMMER2_AVF_ALL_ALLOC           0x04    /* indicate all allocated */
#define HAMMER2_AVF_ALL_FREE            0x08    /* indicate all free */
#define HAMMER2_AVF_RESERVED10          0x10
#define HAMMER2_AVF_RESERVED20          0x20
#define HAMMER2_AVF_RESERVED40          0x40
#define HAMMER2_AVF_RESERVED80          0x80
#define HAMMER2_AVF_AVMASK32            ((uint32_t)0xFFFFFF00LU)
#define HAMMER2_AVF_AVMASK64            ((uint64_t)0xFFFFFFFFFFFFFF00LLU)

#define HAMMER2_AV_SELECT_A             0x00
#define HAMMER2_AV_SELECT_B             0x01
#define HAMMER2_AV_SELECT_C             0x02
#define HAMMER2_AV_SELECT_D             0x03

/*
 * The volume header eats a 64K block.  There is currently an issue where
 * we want to try to fit all nominal filesystem updates in a 512-byte section
 * but it may be a lost cause due to the need for a blockset.
 *
 * All information is stored in host byte order.  The volume header's magic
 * number may be checked to determine the byte order.  If you wish to mount
 * between machines w/ different endian modes you'll need filesystem code
 * which acts on the media data consistently (either all one way or all the
 * other).  Our code currently does not do that.
 *
 * A read-write mount may have to recover missing allocations by doing an
 * incremental mirror scan looking for modifications made after alloc_tid.
 * If alloc_tid == last_tid then no recovery operation is needed.  Recovery
 * operations are usually very, very fast.
 *
 * Read-only mounts do not need to do any recovery, access to the filesystem
 * topology is always consistent after a crash (is always consistent, period).
 * However, there may be shortcutted blockref updates present from deep in
 * the tree which are stored in the volumeh eader and must be tracked on
 * the fly.
 *
 * NOTE: The copyinfo[] array contains the configuration for both the
 *       cluster connections and any local media copies.  The volume
 *       header will be replicated for each local media copy.
 *
 *       The mount command may specify multiple medias or just one and
 *       allow HAMMER2 to pick up the others when it checks the copyinfo[]
 *       array on mount.
 *
 * NOTE: root_blockref points to the super-root directory, not the root
 *       directory.  The root directory will be a subdirectory under the
 *       super-root.
 *
 *       The super-root directory contains all root directories and all
 *       snapshots (readonly or writable).  It is possible to do a
 *       null-mount of the super-root using special path constructions
 *       relative to your mounted root.
 *
 * NOTE: HAMMER2 allows any subdirectory tree to be managed as if it were
 *       a PFS, including mirroring and storage quota operations, and this is
 *       prefered over creating discrete PFSs in the super-root.  Instead
 *       the super-root is most typically used to create writable snapshots,
 *       alternative roots, and so forth.  The super-root is also used by
 *       the automatic snapshotting mechanism.
 */
#define HAMMER2_VOLUME_ID_HBO   0x48414d3205172011LLU
#define HAMMER2_VOLUME_ID_ABO   0x11201705324d4148LLU

struct hammer2_volume_data {
        /*
         * sector #0 - 512 bytes
         */
        uint64_t        magic;                  /* 0000 Signature */
        hammer2_off_t   boot_beg;               /* 0008 Boot area (future) */
        hammer2_off_t   boot_end;               /* 0010 (size = end - beg) */
        hammer2_off_t   aux_beg;                /* 0018 Aux area (future) */
        hammer2_off_t   aux_end;                /* 0020 (size = end - beg) */
        hammer2_off_t   volu_size;              /* 0028 Volume size, bytes */

        uint32_t        version;                /* 0030 */
        uint32_t        flags;                  /* 0034 */
        uint8_t         copyid;                 /* 0038 copyid of phys vol */
        uint8_t         freemap_version;        /* 0039 freemap algorithm */
        uint8_t         peer_type;              /* 003A HAMMER2_PEER_xxx */
        uint8_t         reserved003B;           /* 003B */
        uint32_t        reserved003C;           /* 003C */

        uuid_t          fsid;                   /* 0040 */
        uuid_t          fstype;                 /* 0050 */

        /*
         * allocator_size is precalculated at newfs time and does not include
         * reserved blocks, boot, or redo areas.
         *
         * Initial non-reserved-area allocations do not use the freemap
         * but instead adjust alloc_iterator.  Dynamic allocations take
         * over starting at (allocator_beg).  This makes newfs_hammer2's
         * job a lot easier and can also serve as a testing jig.
         */
        hammer2_off_t   allocator_size;         /* 0060 Total data space */
        hammer2_off_t   allocator_free;         /* 0068 Free space */
        hammer2_off_t   allocator_beg;          /* 0070 Initial allocations */

        /*
         * mirror_tid reflects the highest committed change for this
         * block device regardless of whether it is to the super-root
         * or to a PFS or whatever.
         *
         * freemap_tid reflects the highest committed freemap change for
         * this block device.
         */
        hammer2_tid_t   mirror_tid;             /* 0078 committed tid (vol) */
        hammer2_tid_t   reserved0080;           /* 0080 */
        hammer2_tid_t   reserved0088;           /* 0088 */
        hammer2_tid_t   freemap_tid;            /* 0090 committed tid (fmap) */
        hammer2_tid_t   bulkfree_tid;           /* 0098 bulkfree incremental */
        hammer2_tid_t   reserved00A0[5];        /* 00A0-00C7 */

        /*
         * Copyids are allocated dynamically from the copyexists bitmap.
         * An id from the active copies set (up to 8, see copyinfo later on)
         * may still exist after the copy set has been removed from the
         * volume header and its bit will remain active in the bitmap and
         * cannot be reused until it is 100% removed from the hierarchy.
         */
        uint32_t        copyexists[8];          /* 00C8-00E7 copy exists bmap */
        char            reserved0140[248];      /* 00E8-01DF */

        /*
         * 32 bit CRC array at the end of the first 512 byte sector.
         *
         * icrc_sects[7] - First 512-4 bytes of volume header (including all
         *                 the other icrc's except this one).
         *
         * icrc_sects[6] - Sector 1 (512 bytes) of volume header, which is
         *                 the blockset for the root.
         *
         * icrc_sects[5] - Sector 2
         * icrc_sects[4] - Sector 3
         * icrc_sects[3] - Sector 4 (the freemap blockset)
         */
        hammer2_crc32_t icrc_sects[8];          /* 01E0-01FF */

        /*
         * sector #1 - 512 bytes
         *
         * The entire sector is used by a blockset.
         */
        hammer2_blockset_t sroot_blockset;      /* 0200-03FF Superroot dir */

        /*
         * sector #2-7
         */
        char    sector2[512];                   /* 0400-05FF reserved */
        char    sector3[512];                   /* 0600-07FF reserved */
        hammer2_blockset_t freemap_blockset;    /* 0800-09FF freemap  */
        char    sector5[512];                   /* 0A00-0BFF reserved */
        char    sector6[512];                   /* 0C00-0DFF reserved */
        char    sector7[512];                   /* 0E00-0FFF reserved */

        /*
         * sector #8-71 - 32768 bytes
         *
         * Contains the configuration for up to 256 copyinfo targets.  These
         * specify local and remote copies operating as masters or slaves.
         * copyid's 0 and 255 are reserved (0 indicates an empty slot and 255
         * indicates the local media).
         *
         * Each inode contains a set of up to 8 copyids, either inherited
         * from its parent or explicitly specified in the inode, which
         * indexes into this array.
         */
                                                /* 1000-8FFF copyinfo config */
        hammer2_volconf_t copyinfo[HAMMER2_COPYID_COUNT];

        /*
         * Remaining sections are reserved for future use.
         */
        char            reserved0400[0x6FFC];   /* 9000-FFFB reserved */

        /*
         * icrc on entire volume header
         */
        hammer2_crc32_t icrc_volheader;         /* FFFC-FFFF full volume icrc*/
} __packed;

typedef struct hammer2_volume_data hammer2_volume_data_t;

/*
 * Various parts of the volume header have their own iCRCs.
 *
 * The first 512 bytes has its own iCRC stored at the end of the 512 bytes
 * and not included the icrc calculation.
 *
 * The second 512 bytes also has its own iCRC but it is stored in the first
 * 512 bytes so it covers the entire second 512 bytes.
 *
 * The whole volume block (64KB) has an iCRC covering all but the last 4 bytes,
 * which is where the iCRC for the whole volume is stored.  This is currently
 * a catch-all for anything not individually iCRCd.
 */
#define HAMMER2_VOL_ICRC_SECT0          7
#define HAMMER2_VOL_ICRC_SECT1          6

#define HAMMER2_VOLUME_BYTES            65536

#define HAMMER2_VOLUME_ICRC0_OFF        0
#define HAMMER2_VOLUME_ICRC1_OFF        512
#define HAMMER2_VOLUME_ICRCVH_OFF       0

#define HAMMER2_VOLUME_ICRC0_SIZE       (512 - 4)
#define HAMMER2_VOLUME_ICRC1_SIZE       (512)
#define HAMMER2_VOLUME_ICRCVH_SIZE      (65536 - 4)

#define HAMMER2_VOL_VERSION_MIN         1
#define HAMMER2_VOL_VERSION_DEFAULT     1
#define HAMMER2_VOL_VERSION_WIP         2

#define HAMMER2_NUM_VOLHDRS             4

union hammer2_media_data {
        hammer2_volume_data_t   voldata;
        hammer2_inode_data_t    ipdata;
        hammer2_blockset_t      blkset;
        hammer2_blockref_t      npdata[HAMMER2_IND_COUNT_MAX];
        hammer2_bmap_data_t     bmdata[HAMMER2_FREEMAP_COUNT];
        char                    buf[HAMMER2_PBUFSIZE];
} __packed;

typedef union hammer2_media_data hammer2_media_data_t;

#endif /* !_VFS_HAMMER2_DISK_H_ */