sys/netbt/rfcomm.h

   1 /* $OpenBSD: rfcomm.h,v 1.1 2007/06/01 02:46:11 uwe Exp $ */
   2 /* $NetBSD: rfcomm.h,v 1.3 2007/04/21 06:15:23 plunky Exp $ */
   3 /* $DragonFly: src/sys/netbt/rfcomm.h,v 1.1 2007/12/30 20:02:56 hasso Exp $ */
   4
   5 /*-
   6  * Copyright (c) 2006 Itronix Inc.
   7  * All rights reserved.
   8  *
   9  * Written by Iain Hibbert for Itronix Inc.
  10  *
  11  * Redistribution and use in source and binary forms, with or without
  12  * modification, are permitted provided that the following conditions
  13  * are met:
  14  * 1. Redistributions of source code must retain the above copyright
  15  *    notice, this list of conditions and the following disclaimer.
  16  * 2. Redistributions in binary form must reproduce the above copyright
  17  *    notice, this list of conditions and the following disclaimer in the
  18  *    documentation and/or other materials provided with the distribution.
  19  * 3. The name of Itronix Inc. may not be used to endorse
  20  *    or promote products derived from this software without specific
  21  *    prior written permission.
  22  *
  23  * THIS SOFTWARE IS PROVIDED BY ITRONIX INC. ``AS IS'' AND
  24  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
  25  * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
  26  * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL ITRONIX INC. BE LIABLE FOR ANY
  27  * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
  28  * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
  29  * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
  30  * ON ANY THEORY OF LIABILITY, WHETHER IN
  31  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
  32  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  33  * POSSIBILITY OF SUCH DAMAGE.
  34  */
  35 /*-
  36  * Copyright (c) 2001-2003 Maksim Yevmenkin <m_evmenkin@yahoo.com>
  37  * All rights reserved.
  38  *
  39  * Redistribution and use in source and binary forms, with or without
  40  * modification, are permitted provided that the following conditions
  41  * are met:
  42  * 1. Redistributions of source code must retain the above copyright
  43  *    notice, this list of conditions and the following disclaimer.
  44  * 2. Redistributions in binary form must reproduce the above copyright
  45  *    notice, this list of conditions and the following disclaimer in the
  46  *    documentation and/or other materials provided with the distribution.
  47  *
  48  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
  49  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  50  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  51  * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
  52  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  53  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  54  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  55  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
  56  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
  57  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
  58  * SUCH DAMAGE.
  59  *
  60  * $Id: rfcomm.h,v 1.1.1.1 2007/11/20 11:56:11 griffin Exp $
  61  * $FreeBSD: src/sys/netgraph/bluetooth/include/ng_btsocket_rfcomm.h,v 1.4 2005/01/11 01:39:53 emax Exp $
  62  */
  63
  64 #ifndef _NETBT_RFCOMM_H_
  65 #define _NETBT_RFCOMM_H_
  66
  67 #include <sys/types.h>
  68
  69 /*************************************************************************
  70  *************************************************************************
  71  **                             RFCOMM                                  **
  72  *************************************************************************
  73  *************************************************************************/
  74
  75 #define RFCOMM_MTU_MAX                  32767
  76 #define RFCOMM_MTU_MIN                  23
  77 #define RFCOMM_MTU_DEFAULT              127
  78
  79 #define RFCOMM_CREDITS_MAX              255     /* in any single packet */
  80 #define RFCOMM_CREDITS_DEFAULT          7       /* default initial value */
  81
  82 #define RFCOMM_CHANNEL_MIN              1
  83 #define RFCOMM_CHANNEL_MAX              30
  84
  85 /* RFCOMM frame types */
  86 #define RFCOMM_FRAME_SABM               0x2f
  87 #define RFCOMM_FRAME_DISC               0x43
  88 #define RFCOMM_FRAME_UA                 0x63
  89 #define RFCOMM_FRAME_DM                 0x0f
  90 #define RFCOMM_FRAME_UIH                0xef
  91
  92 /* RFCOMM MCC commands */
  93 #define RFCOMM_MCC_TEST                 0x08    /* Test */
  94 #define RFCOMM_MCC_FCON                 0x28    /* Flow Control on */
  95 #define RFCOMM_MCC_FCOFF                0x18    /* Flow Control off */
  96 #define RFCOMM_MCC_MSC                  0x38    /* Modem Status Command */
  97 #define RFCOMM_MCC_RPN                  0x24    /* Remote Port Negotiation */
  98 #define RFCOMM_MCC_RLS                  0x14    /* Remote Line Status */
  99 #define RFCOMM_MCC_PN                   0x20    /* Port Negotiation */
 100 #define RFCOMM_MCC_NSC                  0x04    /* Non Supported Command */
 101
 102 /* RFCOMM modem signals */
 103 #define RFCOMM_MSC_FC                   0x02    /* Flow Control asserted */
 104 #define RFCOMM_MSC_RTC                  0x04    /* Ready To Communicate */
 105 #define RFCOMM_MSC_RTR                  0x08    /* Ready To Receive */
 106 #define RFCOMM_MSC_IC                   0x40    /* Incomming Call (RING) */
 107 #define RFCOMM_MSC_DV                   0x80    /* Data Valid */
 108
 109 /* RPN parameters - baud rate */
 110 #define RFCOMM_RPN_BR_2400              0x0
 111 #define RFCOMM_RPN_BR_4800              0x1
 112 #define RFCOMM_RPN_BR_7200              0x2
 113 #define RFCOMM_RPN_BR_9600              0x3
 114 #define RFCOMM_RPN_BR_19200             0x4
 115 #define RFCOMM_RPN_BR_38400             0x5
 116 #define RFCOMM_RPN_BR_57600             0x6
 117 #define RFCOMM_RPN_BR_115200            0x7
 118 #define RFCOMM_RPN_BR_230400            0x8
 119
 120 /* RPN parameters - data bits */
 121 #define RFCOMM_RPN_DATA_5               0x0
 122 #define RFCOMM_RPN_DATA_6               0x1
 123 #define RFCOMM_RPN_DATA_7               0x2
 124 #define RFCOMM_RPN_DATA_8               0x3
 125
 126 /* RPN parameters - stop bit */
 127 #define RFCOMM_RPN_STOP_1               0
 128 #define RFCOMM_RPN_STOP_15              1
 129
 130 /* RPN parameters - parity enable */
 131 #define RFCOMM_RPN_PARITY_NONE          0x0
 132
 133 /* RPN parameters - parity type */
 134 #define RFCOMM_RPN_PARITY_ODD           0x0
 135 #define RFCOMM_RPN_PARITY_EVEN          0x1
 136 #define RFCOMM_RPN_PARITY_MARK          0x2
 137 #define RFCOMM_RPN_PARITY_SPACE         0x3
 138
 139 /* RPN parameters - default line_setting */
 140 #define RFCOMM_RPN_8_N_1                0x03
 141
 142 /* RPN parameters - flow control */
 143 #define RFCOMM_RPN_XON_CHAR             0x11
 144 #define RFCOMM_RPN_XOFF_CHAR            0x13
 145 #define RFCOMM_RPN_FLOW_NONE            0x00
 146
 147 /* RPN parameters - mask */
 148 #define RFCOMM_RPN_PM_RATE              0x0001
 149 #define RFCOMM_RPN_PM_DATA              0x0002
 150 #define RFCOMM_RPN_PM_STOP              0x0004
 151 #define RFCOMM_RPN_PM_PARITY            0x0008
 152 #define RFCOMM_RPN_PM_PTYPE             0x0010
 153 #define RFCOMM_RPN_PM_XON               0x0020
 154 #define RFCOMM_RPN_PM_XOFF              0x0040
 155
 156 #define RFCOMM_RPN_PM_FLOW              0x3f00
 157
 158 #define RFCOMM_RPN_PM_ALL               0x3f7f
 159
 160 /* RFCOMM command frame header */
 161 struct rfcomm_cmd_hdr
 162 {
 163         uint8_t         address;
 164         uint8_t         control;
 165         uint8_t         length;
 166         uint8_t         fcs;
 167 } __attribute__ ((__packed__));
 168
 169 /* RFCOMM MSC command */
 170 struct rfcomm_mcc_msc
 171 {
 172         uint8_t         address;
 173         uint8_t         modem;
 174         uint8_t         brk;
 175 } __attribute__ ((__packed__));
 176
 177 /* RFCOMM RPN command */
 178 struct rfcomm_mcc_rpn
 179 {
 180         uint8_t         dlci;
 181         uint8_t         bit_rate;
 182         uint8_t         line_settings;
 183         uint8_t         flow_control;
 184         uint8_t         xon_char;
 185         uint8_t         xoff_char;
 186         uint16_t        param_mask;
 187 } __attribute__ ((__packed__));
 188
 189 /* RFCOMM RLS command */
 190 struct rfcomm_mcc_rls
 191 {
 192         uint8_t         address;
 193         uint8_t         status;
 194 } __attribute__ ((__packed__));
 195
 196 /* RFCOMM PN command */
 197 struct rfcomm_mcc_pn
 198 {
 199         uint8_t         dlci;
 200         uint8_t         flow_control;
 201         uint8_t         priority;
 202         uint8_t         ack_timer;
 203         uint16_t        mtu;
 204         uint8_t         max_retrans;
 205         uint8_t         credits;
 206 } __attribute__ ((__packed__));
 207
 208 /* RFCOMM frame parsing macros */
 209 #define RFCOMM_DLCI(b)                  (((b) & 0xfc) >> 2)
 210 #define RFCOMM_TYPE(b)                  (((b) & 0xef))
 211
 212 #define RFCOMM_EA(b)                    (((b) & 0x01))
 213 #define RFCOMM_CR(b)                    (((b) & 0x02) >> 1)
 214 #define RFCOMM_PF(b)                    (((b) & 0x10) >> 4)
 215
 216 #define RFCOMM_CHANNEL(dlci)            (((dlci) >> 1) & 0x2f)
 217 #define RFCOMM_DIRECTION(dlci)          ((dlci) & 0x1)
 218
 219 #define RFCOMM_MKADDRESS(cr, dlci) \
 220         ((((dlci) & 0x3f) << 2) | ((cr) << 1) | 0x01)
 221
 222 #define RFCOMM_MKCONTROL(type, pf)      ((((type) & 0xef) | ((pf) << 4)))
 223 #define RFCOMM_MKDLCI(dir, channel)     ((((channel) & 0x1f) << 1) | (dir))
 224
 225 /* RFCOMM MCC macros */
 226 #define RFCOMM_MCC_TYPE(b)              (((b) & 0xfc) >> 2)
 227 #define RFCOMM_MCC_LENGTH(b)            (((b) & 0xfe) >> 1)
 228 #define RFCOMM_MKMCC_TYPE(cr, type)     ((((type) << 2) | ((cr) << 1) | 0x01))
 229
 230 /* RPN macros */
 231 #define RFCOMM_RPN_DATA_BITS(line)      ((line) & 0x3)
 232 #define RFCOMM_RPN_STOP_BITS(line)      (((line) >> 2) & 0x1)
 233 #define RFCOMM_RPN_PARITY(line)         (((line) >> 3) & 0x1)
 234
 235 /*************************************************************************
 236  *************************************************************************
 237  **                     SOCK_STREAM RFCOMM sockets                      **
 238  *************************************************************************
 239  *************************************************************************/
 240
 241 /* Socket options */
 242 #define SO_RFCOMM_MTU           1       /* mtu */
 243 #define SO_RFCOMM_FC_INFO       2       /* flow control info (below) */
 244 #define SO_RFCOMM_LM            3       /* link mode */
 245
 246 /* Flow control information */
 247 struct rfcomm_fc_info {
 248         uint8_t         lmodem;         /* modem signals (local) */
 249         uint8_t         rmodem;         /* modem signals (remote) */
 250         uint8_t         tx_cred;        /* TX credits */
 251         uint8_t         rx_cred;        /* RX credits */
 252         uint8_t         cfc;            /* credit flow control */
 253         uint8_t         reserved;
 254 };
 255
 256 /* RFCOMM link mode flags */
 257 #define RFCOMM_LM_AUTH          (1<<0)  /* want authentication */
 258 #define RFCOMM_LM_ENCRYPT       (1<<1)  /* want encryption */
 259 #define RFCOMM_LM_SECURE        (1<<2)  /* want secured link */
 260
 261 #ifdef _KERNEL
 262
 263 /* sysctl variables */
 264 extern int rfcomm_sendspace;
 265 extern int rfcomm_recvspace;
 266 extern int rfcomm_mtu_default;
 267 extern int rfcomm_ack_timeout;
 268 extern int rfcomm_mcc_timeout;
 269
 270 /*
 271  * Bluetooth RFCOMM session data
 272  * One L2CAP connection == one RFCOMM session
 273  */
 274
 275 /* Credit note */
 276 struct rfcomm_credit {
 277         struct rfcomm_dlc               *rc_dlc;        /* owner */
 278         uint16_t                         rc_len;        /* length */
 279         STAILQ_ENTRY(rfcomm_credit)      rc_next;       /* next credit */
 280 };
 281
 282 /* RFCOMM session data (one L2CAP channel) */
 283 struct rfcomm_session {
 284         struct l2cap_channel            *rs_l2cap;      /* L2CAP pointer */
 285         uint16_t                         rs_flags;      /* session flags */
 286         uint16_t                         rs_state;      /* session state */
 287         uint16_t                         rs_mtu;        /* default MTU */
 288
 289         STAILQ_HEAD(,rfcomm_credit)      rs_credits;    /* credit notes */
 290         LIST_HEAD(,rfcomm_dlc)           rs_dlcs;       /* DLC list */
 291
 292         struct callout                   rs_timeout;    /* timeout */
 293
 294         LIST_ENTRY(rfcomm_session)       rs_next;       /* next session */
 295 };
 296
 297 LIST_HEAD(rfcomm_session_list, rfcomm_session);
 298 extern struct rfcomm_session_list rfcomm_session_active;
 299 extern struct rfcomm_session_list rfcomm_session_listen;
 300
 301 /* Session state */
 302 #define RFCOMM_SESSION_CLOSED           0
 303 #define RFCOMM_SESSION_WAIT_CONNECT     1
 304 #define RFCOMM_SESSION_OPEN             2
 305 #define RFCOMM_SESSION_WAIT_DISCONNECT  3
 306 #define RFCOMM_SESSION_LISTEN           4
 307
 308 /* Session flags */
 309 #define RFCOMM_SESSION_INITIATOR        (1 << 0) /* we are initiator */
 310 #define RFCOMM_SESSION_CFC              (1 << 1) /* credit flow control */
 311 #define RFCOMM_SESSION_LFC              (1 << 2) /* local flow control */
 312 #define RFCOMM_SESSION_RFC              (1 << 3) /* remote flow control */
 313 #define RFCOMM_SESSION_FREE             (1 << 4) /* self lock out for free */
 314
 315 #define IS_INITIATOR(rs)        ((rs)->rs_flags & RFCOMM_SESSION_INITIATOR)
 316
 317 /* Bluetooth RFCOMM DLC data (connection) */
 318 struct rfcomm_dlc {
 319         struct rfcomm_session   *rd_session; /* RFCOMM session */
 320         uint8_t                  rd_dlci;    /* RFCOMM DLCI */
 321
 322         uint16_t                 rd_flags;   /* DLC flags */
 323         uint16_t                 rd_state;   /* DLC state */
 324         uint16_t                 rd_mtu;     /* MTU */
 325         int                      rd_mode;    /* link mode */
 326
 327         struct sockaddr_bt       rd_laddr;   /* local address */
 328         struct sockaddr_bt       rd_raddr;   /* remote address */
 329
 330         uint8_t                  rd_lmodem;  /* local modem signls */
 331         uint8_t                  rd_rmodem;  /* remote modem signals */
 332
 333         int                      rd_rxcred;  /* receive credits (sent) */
 334         size_t                   rd_rxsize;  /* receive buffer (bytes, avail) */
 335         int                      rd_txcred;  /* transmit credits (unused) */
 336         int                      rd_pending; /* packets sent but not complete */
 337
 338         struct callout           rd_timeout; /* timeout */
 339         struct mbuf             *rd_txbuf;   /* transmit buffer */
 340
 341         const struct btproto    *rd_proto;   /* upper layer callbacks */
 342         void                    *rd_upper;   /* upper layer argument */
 343
 344         LIST_ENTRY(rfcomm_dlc)   rd_next;    /* next dlc on session */
 345 };
 346
 347 /*
 348  * Credit Flow Control works in the following way.
 349  *
 350  * txcred is how many packets we can send. Received credit
 351  * is added to this value, and it is decremented each time
 352  * we send a packet.
 353  *
 354  * rxsize is the number of bytes that are available in the
 355  * upstream receive buffer.
 356  *
 357  * rxcred is the number of credits that we have previously
 358  * sent that are still unused. This value will be decreased
 359  * for each packet we receive and we will add to it when we
 360  * send credits. We calculate the amount of credits to send
 361  * by the cunning formula "(space / mtu) - sent" so that if
 362  * we get a bunch of small packets, we can continue sending
 363  * credits without risking buffer overflow.
 364  */
 365
 366 /* DLC flags */
 367 #define RFCOMM_DLC_DETACH               (1 << 0) /* DLC to be detached */
 368 #define RFCOMM_DLC_SHUTDOWN             (1 << 1) /* DLC to be shutdown */
 369
 370 /* DLC state */
 371 #define RFCOMM_DLC_CLOSED               0       /* no session */
 372 #define RFCOMM_DLC_WAIT_SESSION         1       /* waiting for session */
 373 #define RFCOMM_DLC_WAIT_CONNECT         2       /* waiting for connect */
 374 #define RFCOMM_DLC_WAIT_SEND_SABM       3       /* waiting to send SABM */
 375 #define RFCOMM_DLC_WAIT_SEND_UA         4       /* waiting to send UA */
 376 #define RFCOMM_DLC_WAIT_RECV_UA         5       /* waiting to receive UA */
 377 #define RFCOMM_DLC_OPEN                 6       /* can send/receive */
 378 #define RFCOMM_DLC_WAIT_DISCONNECT      7       /* waiting for disconnect */
 379 #define RFCOMM_DLC_LISTEN               8       /* listening DLC */
 380
 381 /*
 382  * Bluetooth RFCOMM socket kernel prototypes
 383  */
 384
 385 extern struct pr_usrreqs rfcomm_usrreqs;
 386 struct socket;
 387
 388 /* rfcomm_dlc.c */
 389 struct rfcomm_dlc *rfcomm_dlc_lookup(struct rfcomm_session *, int);
 390 struct rfcomm_dlc *rfcomm_dlc_newconn(struct rfcomm_session *, int);
 391 void rfcomm_dlc_close(struct rfcomm_dlc *, int);
 392 void rfcomm_dlc_timeout(void *);
 393 int rfcomm_dlc_setmode(struct rfcomm_dlc *);
 394 int rfcomm_dlc_connect(struct rfcomm_dlc *);
 395 int rfcomm_dlc_open(struct rfcomm_dlc *);
 396 void rfcomm_dlc_start(struct rfcomm_dlc *);
 397
 398 /* rfcomm_session.c */
 399 void rfcomm_init(void);
 400 struct rfcomm_session *rfcomm_session_alloc(struct rfcomm_session_list *, struct sockaddr_bt *);
 401 struct rfcomm_session *rfcomm_session_lookup(struct sockaddr_bt *, struct sockaddr_bt *);
 402 void rfcomm_session_free(struct rfcomm_session *);
 403 int rfcomm_session_send_frame(struct rfcomm_session *, int, int);
 404 int rfcomm_session_send_uih(struct rfcomm_session *, struct rfcomm_dlc *, int, struct mbuf *);
 405 int rfcomm_session_send_mcc(struct rfcomm_session *, int, uint8_t, void *, int);
 406 void rfcomm_session_timeout(void *);
 407
 408 /* rfcomm_socket.c */
 409 int rfcomm_usrreq(struct socket *, int, struct mbuf *, struct mbuf *, struct mbuf *);
 410 int rfcomm_ctloutput(struct socket *so, struct sockopt *sopt);
 411
 412 /* rfcomm_upper.c */
 413 int rfcomm_attach(struct rfcomm_dlc **, const struct btproto *, void *);
 414 int rfcomm_bind(struct rfcomm_dlc *, struct sockaddr_bt *);
 415 int rfcomm_sockaddr(struct rfcomm_dlc *, struct sockaddr_bt *);
 416 int rfcomm_connect(struct rfcomm_dlc *, struct sockaddr_bt *);
 417 int rfcomm_peeraddr(struct rfcomm_dlc *, struct sockaddr_bt *);
 418 int rfcomm_disconnect(struct rfcomm_dlc *, int);
 419 int rfcomm_detach(struct rfcomm_dlc **);
 420 int rfcomm_listen(struct rfcomm_dlc *);
 421 int rfcomm_send(struct rfcomm_dlc *, struct mbuf *);
 422 int rfcomm_rcvd(struct rfcomm_dlc *, size_t);
 423 int rfcomm_setopt(struct rfcomm_dlc *, int, void *);
 424 int rfcomm_setopt2(struct rfcomm_dlc *, int, struct socket *, struct sockopt *);
 425 int rfcomm_getopt(struct rfcomm_dlc *, int, void *);
 426
 427 extern vm_zone_t rfcomm_credit_pool;
 428 #endif /* _KERNEL */
 429
 430 #endif /* _NETBT_RFCOMM_H_ */