etc/defaults/rc.conf

   1 #!/bin/sh
   2 #
   3
   4 # This is rc.conf - a file full of useful variables that you can set
   5 # to change the default startup behavior of your system.  You should
   6 # not edit this file!  Put any overrides into one of the ${rc_conf_files}
   7 # instead and you will be able to update these defaults later without
   8 # spamming your local configuration information.
   9 #
  10 # The ${rc_conf_files} files should only contain values which override
  11 # values set in this file.  This eases the upgrade path when defaults
  12 # are changed and new features are added.
  13 #
  14 # All arguments must be in double or single quotes.
  15 #
  16 # $FreeBSD: src/etc/defaults/rc.conf,v 1.180 2003/06/26 09:50:50 smkelly Exp $
  17
  18 ##############################################################
  19 ###  Important initial Boot-time options  ####################
  20 ##############################################################
  21
  22 rc_debug="NO"           # Set to YES to enable debugging output from rc.d
  23 rc_info="YES"           # Enables display of informational messages at boot.
  24 rc_startmsgs="YES"      # Show "Starting foo:" messages at boot
  25 rcshutdown_timeout="30" # Seconds to wait before terminating rc.shutdown
  26 swapfile="NO"           # Set to name of swapfile if aux swapfile desired.
  27 powerd_enable="NO"      # Run powerd to adjust CPU speed.
  28 powerd_flags=""         # additional flags for powerd(8).
  29 sensorsd_enable="NO"    # Run sensorsd to monitor and log sensor state changes.
  30 sensorsd_flags=""       # additional flags for sensorsd(8).
  31 hotplugd_enable="NO"    # Run hotplugd to monitor devices hot plugging.
  32 hotplugd_flags=""       # additional flags for hotplugd(8)
  33 pccard_ifconfig="NO"    # Specialized pccard ethernet configuration (or NO).
  34 pccard_ether_delay="5"  # Delay before trying to start dhclient in pccard_ether
  35 removable_interfaces="" # Removable network interfaces for /etc/pccard_ether.
  36 local_startup="/usr/local/etc/rc.d /usr/pkg/etc/rc.d"
  37                         # startup script dirs.
  38 script_name_sep=" "     # Change if your startup scripts' names contain spaces
  39 rc_conf_files="/etc/rc.conf /etc/rc.conf.local"
  40 fsck_y_enable="NO"      # Set to YES to do fsck -y if the initial preen fails.
  41 netfs_types="nfs:NFS smbfs:SMB" # Net filesystems.
  42 extra_netfs_types="NO"  # List of network extra filesystem types for delayed
  43                         # mount at startup (or NO).
  44 devfs_config_files="/etc/defaults/devfs.conf /etc/devfs.conf"
  45                         # Config files for devfs(5)
  46
  47 ##############################################################
  48 ###  Network configuration sub-section  ######################
  49 ##############################################################
  50
  51 ### Basic network and firewall/security options: ###
  52 #
  53 # see 'man firewall' for an explanation of the default firewall rules
  54 #
  55 hostname=""                     # Set this!
  56 nisdomainname="NO"              # Set to NIS domain if using NIS (or NO).
  57 dhclient_program="/sbin/dhclient"       # Path to dhcp client program.
  58 dhclient_flags="-w"             # Additional flags to pass to dhcp client.
  59 firewall_enable="NO"            # Set to YES to enable firewall functionality
  60 firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall
  61 firewall_type="UNKNOWN"         # Firewall type (see /etc/rc.firewall)
  62 firewall_trusted_nets="192.168.0.0/16" # list of trusted nets
  63 firewall_trusted_interfaces=""  # list of trusted interfaces e.g. "rl0 xl0"
  64 firewall_allowed_icmp_types="0 3 8 11 12 13 14"
  65 firewall_open_tcp_ports="22 25 53 80 113 443"
  66 firewall_open_udp_ports="53"
  67 firewall_quiet="NO"             # Set to YES to suppress rule display
  68 firewall_logging="NO"           # Set to YES to enable events logging
  69 firewall_flags=""               # Flags passed to ipfw when type is a file
  70 ip_portrange_first="NO"         # Set first dynamically allocated port
  71 ip_portrange_last="NO"          # Set last dynamically allocated port
  72 ipsec_enable="NO"               # Set to YES to run setkey on ipsec_file
  73 ipsec_file="/etc/ipsec.conf"    # Name of config file for setkey
  74 natd_program="/sbin/natd"       # path to natd, if you want a different one.
  75 natd_enable="NO"                # Enable natd (if firewall_enable == YES).
  76 natd_interface=""               # Public interface or IPaddress to use.
  77 natd_flags=""                   # Additional flags for natd.
  78 pf_enable="NO"                  # Set to YES to enable packet filter (pf)
  79 pf_rules="/etc/pf.conf"         # rules definition file for pf
  80 pf_program="/usr/sbin/pfctl"    # where the pfctl program lives
  81 pf_flags=""                     # additional flags for pfctl
  82 pflog_enable="NO"               # Set to YES to enable packet filter logging
  83 pflog_logfile="/var/log/pflog"  # where pflogd should store the logfile
  84 pflog_program="/usr/sbin/pflogd"        # where the pflogd program lives
  85 pflog_flags=""                  # additional flags for pflogd
  86 tcp_extensions="YES"            # Set to NO to turn off RFC1323 extensions.
  87 log_in_vain="0"                 # >=1 to log connects to ports w/o listeners.
  88 tcp_keepalive="YES"             # Enable stale TCP connection timeout (or NO).
  89 # For the following option you need to have TCP_DROP_SYNFIN set in your
  90 # kernel.  Please refer to LINT64 details.
  91 tcp_drop_synfin="NO"            # Set to YES to drop TCP packets with SYN+FIN
  92                                 # NOTE: this violates the TCP specification
  93 icmp_drop_redirect="NO"         # Set to YES to ignore ICMP REDIRECT packets
  94 icmp_log_redirect="NO"          # Set to YES to log ICMP REDIRECT packets
  95 network_interfaces="auto"       # List of network interfaces (or "auto").
  96 cloned_interfaces=""            # List of cloned network interfaces to create.
  97 #cloned_interfaces="gif0 gif1 gif2 gif3" # Pre-cloning X86_64_GENERIC config.
  98 ifconfig_lo0="inet 127.0.0.1"   # default loopback device configuration.
  99 #ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry.
 100 #ifconfig_fxp0_name="net0"      # Change interface name from fxp0 to net0.
 101 #
 102 # If you have any sppp(4) interfaces above, you might also want to set
 103 # the following parameters.  Refer to spppcontrol(8) for their meaning.
 104 sppp_interfaces=""              # List of sppp interfaces.
 105 #sppp_interfaces="...0"         # example: sppp over ...
 106 #spppconfig_...0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'"
 107 gif_interfaces="NO"             # List of GIF tunnels (or "NO").
 108 #gif_interfaces="gif0 gif1"     # Examples typically for a router.
 109                                 # Choose correct tunnel addrs.
 110 #gifconfig_gif0="10.1.1.1 10.1.2.1"     # Examples typically for a router.
 111 #gifconfig_gif1="10.1.1.2 10.1.2.2"     # Examples typically for a router.
 112
 113 # User ppp configuration.
 114 ppp_enable="NO"         # Start user-ppp (or NO).
 115 ppp_mode="auto"         # Choice of "auto", "ddial", "direct" or "dedicated".
 116                         # For details see man page for ppp(8). Default is auto.
 117 ppp_nat="YES"           # Use PPP's internal network address translation or NO.
 118 ppp_profile="papchap"   # Which profile to use from /etc/ppp/ppp.conf.
 119 ppp_user="root"         # Which user to run ppp as
 120
 121 ### Network daemon (miscellaneous) ###
 122 syslogd_enable="YES"            # Run syslog daemon (or NO).
 123 syslogd_program="/usr/sbin/syslogd" # path to syslogd, if you want a different one.
 124 #syslogd_flags="-s"             # Flags to syslogd (if enabled).
 125 syslogd_flags="-ss"             # Syslogd flags to not bind an inet socket
 126 inetd_enable="NO"               # Run the network daemon dispatcher (YES/NO).
 127 inetd_program="/usr/sbin/inetd" # path to inetd, if you want a different one.
 128 inetd_flags="-wW"               # Optional flags to inetd
 129
 130 rwhod_enable="NO"               # Run the rwho daemon (or NO).
 131 rwhod_flags=""                  # Flags for rwhod
 132 rarpd_enable="NO"               # Run rarpd (or NO).
 133 rarpd_flags=""                  # Flags to rarpd.
 134 bootparamd_enable="NO"          # Run bootparamd (or NO).
 135 bootparamd_flags=""             # Flags to bootparamd
 136 pppoed_enable="NO"              # Run the PPP over Ethernet daemon.
 137 pppoed_provider="*"             # Provider and ppp(8) config file entry.
 138 pppoed_flags="-P /var/run/pppoed.pid"   # Flags to pppoed (if enabled).
 139 pppoed_interface="fxp0"         # The interface that pppoed runs on.
 140 sshd_enable="NO"                # Enable sshd
 141 sshd_program="/usr/sbin/sshd"   # path to sshd, if you want a different one.
 142 sshd_flags=""                   # Additional flags for sshd.
 143
 144 ftpd_enable="NO"                # Run stand-alone ftp daemon (or NO).
 145 ftpd_flags=""                   # Flags for ftpd, -D added implicitly.
 146
 147 ### Network File System (NFS): ###
 148 ### Server-side options also need rpcbind_enable="YES" ###
 149 ###
 150 ### NOTE: attribute cache timeouts only effect NFS lookup rpc's.  If
 151 ### the mtime matches the data cache is left intact.
 152 ###
 153 autofs_enable="NO"              # Run automountd(8)
 154 automount_flags=""              # Flags to automount(8) (if autofs enabled).
 155 automountd_flags=""             # Flags to automountd(8) (if autofs enabled).
 156 autounmountd_flags=""           # Flags to autounmountd(8) (if autofs enabled).
 157 nfs_client_enable="NO"          # This host is an NFS client (or NO).
 158 nfs_access_cache="5"            # Client attribute cache timeout in seconds
 159 #nfs_neg_cache="3"              # Client attribute negative hit cache timeout
 160 nfs_server_enable="NO"          # This host is an NFS server (or NO).
 161 nfs_server_flags="-u -t -n 4"   # Flags to nfsd (if enabled).
 162 mountd_enable="NO"              # Run mountd (or NO).
 163 mountd_flags="-r"               # Flags to mountd (if NFS server enabled).
 164 weak_mountd_authentication="NO" # Allow non-root mount requests to be served.
 165 nfs_reserved_port_only="NO"     # Provide NFS only on secure port (or NO).
 166 nfs_bufpackets=""               # bufspace (in packets) for client
 167 rpc_lockd_enable="NO"           # Run NFS rpc.lockd needed for client/server.
 168 rpc_lockd_flags=""              # Flags to rpc.lockd (if enabled).
 169 rpc_statd_enable="NO"           # Run NFS rpc.statd needed for client/server.
 170 rpc_statd_flags=""              # Flags to rpc.statd (if enabled).
 171 rpc_umntall_enable="YES"        # Run NFS rpc.umntall on boot and shutdown
 172 rpcbind_enable="NO"             # Run the portmapper service (YES/NO).
 173 rpcbind_program="/usr/sbin/rpcbind"     # path to rpcbind, if you want a different one.
 174 rpcbind_flags=""                # Flags to rpcbind (if enabled).
 175 rpc_ypupdated_enable="NO"       # Run if NIS master and SecureRPC (or NO).
 176 keyserv_enable="NO"             # Run the SecureRPC keyserver (or NO).
 177 keyserv_flags=""                # Flags to keyserv (if enabled).
 178
 179 ### Network Time Services options: ###
 180 timed_enable="NO"               # Run the time daemon (or NO).
 181 timed_flags=""                  # Flags to timed (if enabled).
 182 dntpd_enable="NO"               # Run dntpd Network Time Protocol (or NO).
 183 dntpd_program="/usr/sbin/dntpd" # path to dntpd, if you want a different one.
 184 dntpd_flags=""                  # Flags to dntpd (if enabled) also server name(s)
 185
 186 # Bluetooth deamons and options:
 187 btconfig_enable="NO"            # Configure Bluetooth devices (or NO).
 188 btconfig_devices=""             # List of Bluetooth devices (or empty for all).
 189 #btconfig_<device>=""           # Parameters to pass to <device>.
 190 btconfig_args=""                # Parameters to pass to all devices.
 191 sdpd_enable="NO"                # Run the Service Discovery Profile daemon (or NO).
 192 sdpd_flags=""                   # Flags to sdpd (if enabled).
 193 bthcid_enable="NO"              # Run the Bluetooth Link Key/PIN Code Manager (or NO).
 194 bthcid_flags=""                 # Flags to bthcid (if enabled).
 195
 196 # Network Information Services (NIS) options: All need rpcbind_enable="YES" ###
 197 nis_client_enable="NO"          # We're an NIS client (or NO).
 198 nis_client_flags=""             # Flags to ypbind (if enabled).
 199 nis_ypset_enable="NO"           # Run ypset at boot time (or NO).
 200 nis_ypset_flags=""              # Flags to ypset (if enabled).
 201 nis_server_enable="NO"          # We're an NIS server (or NO).
 202 nis_server_flags=""             # Flags to ypserv (if enabled).
 203 nis_ypxfrd_enable="NO"          # Run rpc.ypxfrd at boot time (or NO).
 204 nis_ypxfrd_flags=""             # Flags to rpc.ypxfrd (if enabled).
 205 nis_yppasswdd_enable="NO"       # Run rpc.yppasswdd at boot time (or NO).
 206 nis_yppasswdd_flags=""          # Flags to rpc.yppasswdd (if enabled).
 207
 208 ### Network routing options: ###
 209 defaultrouter="NO"              # Set to default gateway (or NO).
 210 static_routes=""                # Set to static route list (or leave empty).
 211 gateway_enable="NO"             # Set to YES if this host will be a gateway.
 212 router_enable="NO"              # Set to YES to enable a routing daemon.
 213 router_program="/sbin/routed"           # Name of routing daemon to use if enabled.
 214 router_flags="-q"               # Flags for routing daemon.
 215 mrouted_enable="NO"             # Do multicast routing (see /etc/mrouted.conf).
 216 mrouted_flags=""                # Flags for multicast routing daemon.
 217 arpproxy_all="NO"               # replaces obsolete kernel option ARP_PROXYALL.
 218 forward_sourceroute="NO"        # do source routing (only if gateway_enable is set to "YES")
 219 accept_sourceroute="NO"         # accept source routed packets to us
 220
 221 ### Miscellaneous network options: ###
 222 icmp_bmcastecho="NO"    # respond to broadcast ping packets
 223
 224 ### IPv6 options: ###
 225 ipv6_enable="NO"                # Set to YES to set up for IPv6.
 226 ipv6_network_interfaces="auto"  # List of network interfaces (or "auto").
 227 ipv6_defaultrouter="NO"         # Set to IPv6 default gateway (or NO).
 228 #ipv6_defaultrouter="2002:c058:6301::"  # Use this for 6to4 (RFC 3068)
 229 ipv6_static_routes=""           # Set to static route list (or leave empty).
 230 #ipv6_static_routes="xxx"       # An example to set fec0:0000:0000:0006::/64
 231                                 #  route toward loopback interface.
 232 #ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1"
 233 ipv6_gateway_enable="NO"        # Set to YES if this host will be a gateway.
 234 ipv6_router_enable="NO"         # Set to YES to enable an IPv6 routing daemon.
 235 ipv6_router_program="/usr/sbin/route6d" # Name of IPv6 routing daemon.
 236 ipv6_router_flags=""            # Flags to IPv6 routing daemon.
 237 #ipv6_router_flags="-l"         # Example for route6d with only IPv6 site local
 238                                 # addrs.
 239 #ipv6_router_flags="-q"         # If you want to run a routing daemon on an end
 240                                 # node, you should stop advertisement.
 241 #ipv6_network_interfaces="ed0 ep0"      # Examples for router
 242                                         # or static configuration for end node.
 243                                         # Choose correct prefix value.
 244 #ipv6_prefix_ed0="fec0:0000:0000:0001 fec0:0000:0000:0002"  # Examples for rtr.
 245 #ipv6_prefix_ep0="fec0:0000:0000:0003 fec0:0000:0000:0004"  # Examples for rtr.
 246 #ipv6_ifconfig_ed0="fec0:0:0:5::1 prefixlen 64" # Sample manual assign entry
 247 #ipv6_ifconfig_ed0_alias0="fec0:0:0:5::2 prefixlen 64" # Sample alias entry.
 248 ipv6_default_interface="NO"     # Default output interface for scoped addrs.
 249                                 # Now this works only for IPv6 link local
 250                                 # multicast addrs.
 251 rtadvd_enable="NO"              # Set to YES to enable an IPv6 router
 252                                 # advertisement daemon. If set to YES,
 253                                 # this router becomes a possible candidate
 254                                 # IPv6 default router for local subnets.
 255 rtadvd_interfaces=""            # Interfaces rtadvd sends RA packets.
 256 rtsold_enable="NO"              # Set to YES to enable an IPv6 routing
 257                                 # solicitation daemon.  This is used for
 258                                 # automatic discovery of non-link local
 259                                 # addresses.
 260 rtsold_flags="-a"               # Do autoprobing of outgoing interface.
 261 mroute6d_enable="NO"            # Do IPv6 multicast routing.
 262 mroute6d_program="/usr/local/sbin/pim6dd"       # Name of IPv6 multicast
 263                                                 # routing daemon.  You need to
 264                                                 # install it from package or
 265                                                 # port.
 266 mroute6d_flags=""               # Flags to IPv6 multicast routing daemon.
 267 stf_interface_ipv4addr=""       # Local IPv4 addr for 6to4 IPv6 over IPv4
 268                                 # tunneling interface. Specify this entry
 269                                 # to enable 6to4 interface.
 270 stf_interface_ipv4plen="0"      # Prefix length for 6to4 IPv4 addr,
 271                                 # to limit peer addr range. Effective value
 272                                 # is 0-31.
 273 stf_interface_ipv6_ifid="0:0:0:1"       # IPv6 interface id for stf0.
 274                                 # If you like, you can set "AUTO" for this.
 275 stf_interface_ipv6_slaid="0000" # IPv6 Site Level Aggregator for stf0
 276 ipv6_faith_prefix="NO"          # Set faith prefix to enable a FAITH
 277                                 # IPv6-to-IPv4 TCP translator.  You also need
 278                                 # faithd(8) setup.
 279 ipv6_firewall_enable="NO"       # Set to YES to enable IPv6 firewall
 280                                 # functionality
 281 ipv6_firewall_script="/etc/rc.firewall6" # Which script to run to set up the IPv6 firewall
 282 ipv6_firewall_type="UNKNOWN"    # IPv6 Firewall type (see /etc/rc.firewall6)
 283 ipv6_firewall_quiet="NO"        # Set to YES to suppress rule display
 284 ipv6_firewall_logging="NO"      # Set to YES to enable events logging
 285 ipv6_firewall_flags=""          # Flags passed to ip6fw when type is a file
 286
 287 ##############################################################
 288 ###  System console options  #################################
 289 ##############################################################
 290
 291 keymap="NO"             # keymap in /usr/share/syscons/keymaps/* (or NO).
 292 keyrate="NO"            # keyboard rate to: slow, normal, fast (or NO).
 293 keybell="NO"            # See kbdcontrol(1) for options.  Use "off" to disable.
 294 keychange="NO"          # function keys default values (or NO).
 295 cursor="NO"             # cursor type {normal|blink|destructive} (or NO).
 296 scrnmap="NO"            # screen map in /usr/share/syscons/scrnmaps/* (or NO).
 297 font8x16="NO"           # font 8x16 from /usr/share/syscons/fonts/* (or NO).
 298 font8x14="NO"           # font 8x14 from /usr/share/syscons/fonts/* (or NO).
 299 font8x8="NO"            # font 8x8 from /usr/share/syscons/fonts/* (or NO).
 300 blanktime="300"         # blank time (in seconds) or "NO" to turn it off.
 301 saver="NO"              # screen saver: Uses /modules/${saver}_saver.ko
 302 moused_nondefault_enable="YES" # Treat non-default mice as enabled unless
 303                                # specifically overriden in rc.conf(5).
 304 moused_enable="NO"      # Run the mouse daemon.
 305 moused_type="auto"      # See man page for rc.conf(5) for available settings.
 306 moused_port="/dev/psm0" # Set to your mouse port.
 307 moused_flags=""         # Any additional flags to moused.
 308 mousechar_start="NO"    # if 0xd0-0xd3 default range is occupied in your
 309                         # language code table, specify alternative range
 310                         # start like mousechar_start=3, see vidcontrol(1)
 311 vidhistory=""           # Set video history buffer size
 312 allscreens_flags=""     # Set this vidcontrol mode for all virtual screens
 313 allscreens_kbdflags=""  # Set this kbdcontrol mode for all virtual screens
 314
 315
 316 ##############################################################
 317 ###  Mail Transfer Agent (MTA) options  ######################
 318 ##############################################################
 319
 320 mta_start_script="/etc/rc.sendmail"
 321                         # Script to start your chosen MTA, called by /etc/rc.
 322 # Settings for /etc/rc.sendmail:
 323 sendmail_enable="NO"    # Run the sendmail inbound daemon (YES/NO).
 324 sendmail_flags="-L sm-mta -bd -q30m" # Flags to sendmail (as a server)
 325 sendmail_submit_enable="YES"    # Start a localhost-only MTA for mail submission
 326 sendmail_submit_flags="-L sm-mta -bd -q30m -ODaemonPortOptions=Addr=localhost"
 327                                 # Flags for localhost-only MTA
 328 sendmail_outbound_enable="YES"  # Dequeue stuck mail (YES/NO).
 329 sendmail_outbound_flags="-L sm-queue -q30m" # Flags to sendmail (outbound only)
 330 sendmail_msp_queue_enable="YES" # Dequeue stuck clientmqueue mail (YES/NO).
 331 sendmail_msp_queue_flags="-L sm-msp-queue -Ac -q30m"
 332                                 # Flags for sendmail_msp_queue daemon.
 333 sendmail_rebuild_aliases="YES"  # Run newaliases if necessary (YES/NO).
 334
 335
 336 ##############################################################
 337 ###  Miscellaneous administrative options  ###################
 338 ##############################################################
 339
 340 mixer_enable="YES"      # Manage mixer settings across reboots
 341 cron_enable="YES"       # Run the periodic job daemon.
 342 cron_program="/usr/sbin/cron"   # Which cron executable to run (if enabled).
 343 cron_flags=""           # Which options to pass to the cron daemon.
 344 lpd_enable="NO"         # Run the line printer daemon.
 345 lpd_program="/usr/sbin/lpd"     # path to lpd, if you want a different one.
 346 lpd_flags=""            # Flags to lpd (if enabled).
 347 nscd_enable="NO"        # Run the nsswitch caching daemon.
 348 devd_enable="YES"       # Run devd, to trigger programs on device tree changes.
 349 devd_flags=""           # Additional flags for devd(8).
 350 dumpdev="NO"            # Device name to crashdump to (or NO).
 351 dumpdir="/var/crash"    # Directory where crash dumps are to be stored
 352 savecore_flags=""       # Used if dumpdev is enabled above, and present.
 353 crashinfo_enable="YES"  # Automatically generate crash dump summary.
 354 crashinfo_program="/usr/sbin/crashinfo" # Script to generate crash dump summary.
 355 enable_quotas="NO"      # turn on quotas on startup (or NO).
 356 check_quotas="YES"      # Check quotas on startup (or NO).
 357 accounting_enable="NO"  # Turn on process accounting (or NO).
 358 sysvipcd_enable="NO"    # Run the System V IPC daemon at startup (or NO).
 359 clear_tmp_enable="NO"   # Clear /tmp at startup.
 360 ldconfig_insecure="NO"  # Set to YES to disable ldconfig security checks
 361 ldconfig_paths="/lib /usr/lib /usr/local/lib /usr/pkg/lib"
 362                         # shared library search paths
 363 ldconfig_local_dirs="/usr/local/libdata/ldconfig"
 364                         # Local directories with ldconfig configuration files.
 365 kern_securelevel="-1"   # range: -1..3 ; `-1' is the most insecure
 366 update_motd="YES"       # update version info in /etc/motd (or NO)
 367 start_vinum="NO"        # set to YES to start vinum
 368 udevd_enable="NO"       # Run udevd(8) daemon.
 369 udevd_early="NO"        # Run udevd(8) daemon early in boot (for lvm).
 370 lvm_enable="NO"         # Run LVM volume discovery.
 371 entropy_file="/entropy" # Set to NO to disable caching entropy through reboots.
 372 entropy_save_sz="16384" # Size of the entropy cache files (in bytes)
 373 rand_irqs="NO"          # Stir the entropy pool (like "5 11" or NO).
 374 dmesg_enable="YES"      # Save dmesg(8) to /var/run/dmesg.boot
 375 newsyslog_enable="NO"   # Run newsyslog at startup.
 376 newsyslog_flags=""      # Flags to newsyslog (if enabled).
 377 resident_enable="NO"    # Process /etc/resident.conf
 378 varsym_enable="NO"      # Process /etc/varsym.conf
 379 watchdogd_enable="NO"   # Start the software watchdog daemon
 380
 381 ##############################################################
 382 ### Jail Configuration #######################################
 383 ##############################################################
 384
 385 jail_enable="NO"        # Set to NO to disable starting of any jails
 386 jail_list=""            # Space separated list of names of jails
 387 jail_set_hostname_allow="YES" # Allow root user in a jail to change its hostname
 388 jail_socket_unixiproute_only="YES" # Route only TCP/IP within a jail
 389 jail_sysvipc_allow="NO" # Allow SystemV IPC use from within a jail
 390
 391 #
 392 # To use rc's built-in jail infrastructure create entries for
 393 # each jail, specified in jail_list, with the following variables.
 394 # NOTES:
 395 # - replace 'example' with the jail's name.
 396 # - except rootdir, hostname and ip, all of the following variables may be made
 397 #   global jail variables if you don't specify a jail name (ie. jail_interface).
 398 #
 399 #jail_example_rootdir="/usr/jail/default"       # Jail's root directory
 400 #jail_example_hostname="default.domain.com"     # Jail's hostname
 401 #jail_example_ip="192.168.0.10"                 # Jail's IP number
 402 #jail_example_interface=""                      # Interface to create the IP alias on
 403 #jail_example_exec_start="/bin/sh /etc/rc"              # command to execute in jail for starting
 404 #jail_example_exec_stop="/bin/sh /etc/rc.shutdown"      # command to execute in jail for stopping
 405 #jail_example_procfs_enable="NO"                # mount procfs in jail
 406 #jail_example_devfs_enable="NO"                 # mount devfs in jail
 407 #jail_example_mount_enable="NO"                 # mount/umount jail's fs
 408 #jail_example_fstab=""                          # fstab(5) for mount/umount
 409 #jail_example_flags="-l -U root"                # flags for jail(8)
 410
 411 ##############################################################
 412 ###  VFS quota options #######################################
 413 ##############################################################
 414
 415 vfs_quota_enable="NO" # Set to YES to enable handling of these vfs quota options
 416 vfs_quota_sync=""     # Space separated list of mount points or "NO"
 417
 418 ##############################################################
 419 ###  VKernel options #########################################
 420 ##############################################################
 421
 422 vkernel_enable="NO"     # Set to YES to enable starting of vkernels
 423 vkernel_list=""         # Space separated list of names of vkernels
 424 #vkernel_bin="/boot/kernel.VKERNEL64"   # Default path to the vkernel binary
 425 #vkernel_kill_timeout="45"      # Default timeout before a SIGKILL is issued
 426
 427 vknetd_enable="NO"      # Bridged networking
 428 vknetd_flags="-U"       # Bridged networking flags
 429 #
 430 # Create an entry for each vkernel specified in vkernel_list
 431 # replacing 'example' by the name of the vkernel.
 432 #
 433 #vkernel_example_bin="/boot/kernel.VKERNEL64"
 434         # Path to the vkernel binary
 435 #vkernel_example_memsize="64m"
 436         # Amount of memory for the vkernel
 437 #vkernel_example_rootimg_list="/var/vkernel/rootimg.01"
 438         # Space separated list of disk images
 439 #vkernel_example_memimg="/var/vkernel/memimg.000000"
 440         # Optional: Memory image file for vkernel
 441 #vkernel_example_iface_list="auto:bridge0"
 442         # Optional: space separated list network interfaces for the vkernel
 443 #vkernel_example_logfile="/dev/null"
 444         # Optional: path to the console log file
 445 #vkernel_example_user="root"
 446         # Optional: user that will run the vkernel
 447 #vkernel_example_flags="-U"
 448         # Optional: aditional flags to start the vkernel with
 449 #vkernel_example_kill_timeout="45"
 450         # Optional: timeout before SIGKILL is issued when stopping the vkernel
 451
 452 ##############################################################
 453 ### Define source_rc_confs, the mechanism used by /etc/rc.* ##
 454 ### scripts to source rc_conf_files overrides safely.       ##
 455 ##############################################################
 456
 457 if [ -z "${source_rc_confs_defined}" ]; then
 458         source_rc_confs_defined=yes
 459         source_rc_confs () {
 460                 local i sourced_files
 461                 for i in ${rc_conf_files}; do
 462                         case ${sourced_files} in
 463                         *:$i:*)
 464                                 ;;
 465                         *)
 466                                 sourced_files="${sourced_files}:$i:"
 467                                 if [ -r $i ]; then
 468                                         . $i
 469                                 fi
 470                                 ;;
 471                         esac
 472                 done
 473         }
 474 fi