hammer2 - Fix flush issues with unmounted PFSs and shutdown panic
[dragonfly.git] / sbin / startslip / startslip.c
blobc64626b4bc9d0832d616748085ab894b8af45d05
1 /*-
2 * Copyright (c) 1990, 1991, 1993
3 * The Regents of the University of California. All rights reserved.
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
7 * are met:
8 * 1. Redistributions of source code must retain the above copyright
9 * notice, this list of conditions and the following disclaimer.
10 * 2. Redistributions in binary form must reproduce the above copyright
11 * notice, this list of conditions and the following disclaimer in the
12 * documentation and/or other materials provided with the distribution.
13 * 3. Neither the name of the University nor the names of its contributors
14 * may be used to endorse or promote products derived from this software
15 * without specific prior written permission.
17 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
18 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
19 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
20 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
21 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
22 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
23 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
24 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
25 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
26 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
27 * SUCH DAMAGE.
29 * @(#) Copyright (c) 1990, 1991, 1993 The Regents of the University of California. All rights reserved.
30 * @(#)startslip.c 8.1 (Berkeley) 6/5/93
31 * $FreeBSD: src/sbin/startslip/startslip.c,v 1.31.2.1 2000/05/07 18:26:51 joe Exp $
34 #include <sys/types.h>
35 #include <sys/time.h>
37 #include <err.h>
38 #include <errno.h>
39 #include <fcntl.h>
40 #include <libutil.h>
41 #include <paths.h>
42 #include <signal.h>
43 #include <stdio.h>
44 #include <stdlib.h>
45 #include <string.h>
46 #include <syslog.h>
47 #include <termios.h>
48 #include <unistd.h>
50 #include <net/slip.h>
52 #define DEFAULT_BAUD B9600
53 int speed = DEFAULT_BAUD;
54 #define FC_NONE 0 /* flow control: none */
55 #define FC_HW 1 /* flow control: hardware (RTS/CTS) */
56 int flowcontrol = FC_NONE;
57 int modem_control = 1; /* !CLOCAL+HUPCL iff we watch carrier. */
58 int sl_unit = -1;
59 int uucp_lock = 0; /* uucp locking */
60 char *annex;
61 char *username;
62 int hup;
63 int terminate;
64 int locked = 0; /* uucp lock active */
65 int logged_in = 0;
66 int wait_time = 60; /* then back off */
67 int script_timeout = 90; /* connect script default timeout */
68 time_t conn_time, start_time;
69 int MAXTRIES = 6; /* w/60 sec and doubling, takes an hour */
70 #define PIDFILE "%sstartslip.%s.pid"
72 #define MAXDIALS 20
73 char *dials[MAXDIALS];
74 int diali, dialc;
76 int fd = -1;
77 FILE *pfd;
78 char *dvname, *devicename;
79 char my_pidfile[80];
81 #ifdef DEBUG
82 int debug = 1;
83 #undef LOG_ERR
84 #undef LOG_INFO
85 #define syslog fprintf
86 #define LOG_ERR stderr
87 #define LOG_INFO stderr
88 #else
89 int debug = 0;
90 #endif
91 #define printd if (debug) printf
93 static int carrier(void);
94 static void down(int);
95 static int get_line(char *, int, int, time_t);
96 static void usage(void);
97 static void sighup(int);
98 static void sigterm(int);
99 static void sigurg(int);
102 main(int argc, char **argv)
104 char *cp, **ap;
105 int ch, disc;
106 FILE *wfd = NULL;
107 char *dialerstring = NULL, buf[BUFSIZ];
108 int unitnum, keepal = 0, outfill = 0;
109 char unitname[32];
110 char *password;
111 char *upscript = NULL, *downscript = NULL;
112 int first = 1, tries = 0;
113 time_t fintimeout;
114 long lpid;
115 pid_t pid;
116 struct termios t;
117 int result;
119 while ((ch = getopt(argc, argv, "dhlb:s:t:w:A:U:D:W:K:O:S:L")) != -1)
120 switch (ch) {
121 case 'd':
122 debug = 1;
123 break;
124 case 'b':
125 speed = atoi(optarg);
126 break;
127 case 's':
128 if (diali >= MAXDIALS)
129 errx(1, "max dial strings number (%d) exceeded", MAXDIALS);
130 dials[diali++] = strdup(optarg);
131 break;
132 case 't':
133 script_timeout = atoi(optarg);
134 break;
135 case 'w':
136 wait_time = atoi(optarg);
137 break;
138 case 'W':
139 MAXTRIES = atoi(optarg);
140 break;
141 case 'A':
142 annex = strdup(optarg);
143 break;
144 case 'U':
145 upscript = strdup(optarg);
146 break;
147 case 'D':
148 downscript = strdup(optarg);
149 break;
150 case 'L':
151 uucp_lock = 1;
152 break;
153 case 'l':
154 modem_control = 0;
155 break;
156 case 'h':
157 flowcontrol = FC_HW;
158 break;
159 case 'K':
160 keepal = atoi(optarg);
161 break;
162 case 'O':
163 outfill = atoi(optarg);
164 break;
165 case 'S':
166 sl_unit = atoi(optarg);
167 break;
168 case '?':
169 default:
170 usage();
172 argc -= optind;
173 argv += optind;
175 if (argc != 3)
176 usage();
179 * Copy these so they exist after we clobber them.
181 devicename = strdup(argv[0]);
182 username = strdup(argv[1]);
183 password = strdup(argv[2]);
186 * Security hack. Do not want private information such as the
187 * password and possible phone number to be left around.
188 * So we clobber the arguments.
190 for (ap = argv - optind + 1; ap < argv + 3; ap++)
191 for (cp = *ap; *cp != 0; cp++)
192 *cp = '\0';
194 openlog("startslip", LOG_PID|LOG_PERROR, LOG_DAEMON);
196 if (debug)
197 setbuf(stdout, NULL);
199 signal(SIGTERM, sigterm);
200 if ((dvname = strrchr(devicename, '/')) == NULL)
201 dvname = devicename;
202 else
203 dvname++;
205 result = snprintf(my_pidfile, sizeof(my_pidfile),
206 PIDFILE, _PATH_VARRUN, dvname);
207 if (result < 0 || (unsigned int)result >= sizeof(my_pidfile))
208 usage();
210 if ((pfd = fopen(my_pidfile, "r")) != NULL) {
211 if (fscanf(pfd, "%ld\n", &lpid) == 1) {
212 pid = lpid;
213 if (pid == lpid && pid > 0)
214 kill(pid, SIGTERM);
216 fclose(pfd);
217 pfd = NULL; /* not remove pidfile yet */
218 sleep(5); /* allow down script to be completed */
219 } else
220 restart:
221 signal(SIGHUP, SIG_IGN);
222 signal(SIGURG, SIG_IGN);
223 hup = 0;
224 if (wfd) {
225 printd("fclose, ");
226 fclose(wfd);
227 conn_time = time(NULL) - start_time;
228 if (uucp_lock)
229 uu_unlock(dvname);
230 locked = 0;
231 wfd = NULL;
232 fd = -1;
233 sleep(5);
234 } else if (fd >= 0) {
235 printd("close, ");
236 close(fd);
237 conn_time = time(NULL) - start_time;
238 if (uucp_lock)
239 uu_unlock(dvname);
240 locked = 0;
241 fd = -1;
242 sleep(5);
244 if (logged_in) {
245 syslog(LOG_INFO, "%s: connection time elapsed: %ld secs",
246 username, (long)conn_time);
247 sprintf(buf, "LINE=%d %s %s down",
248 diali ? (dialc - 1) % diali : 0,
249 downscript ? downscript : "/sbin/ifconfig" , unitname);
250 system(buf);
251 logged_in = 0;
253 if (terminate)
254 down(0);
255 tries++;
256 if (MAXTRIES > 0 && tries > MAXTRIES) {
257 syslog(LOG_ERR, "%s: exiting login after %d tries", username, tries);
258 /* ???
259 if (first)
261 down(3);
263 if (tries > 1) {
264 syslog(LOG_INFO, "%s: sleeping %d seconds (%d tries)",
265 username, wait_time * (tries - 1), tries);
266 sleep(wait_time * (tries - 1));
267 if (terminate)
268 goto restart;
271 if (daemon(1, debug) < 0) {
272 syslog(LOG_ERR, "%s: daemon: %m", username);
273 down(2);
276 pid = getpid();
277 printd("restart: pid %ld: ", (long)pid);
278 if ((pfd = fopen(my_pidfile, "w")) != NULL) {
279 fprintf(pfd, "%ld\n", (long)pid);
280 fclose(pfd);
282 printd("open");
283 if (uucp_lock) {
284 int res;
285 if ((res = uu_lock(dvname)) != UU_LOCK_OK) {
286 if (res != UU_LOCK_INUSE)
287 syslog(LOG_ERR, "uu_lock: %s", uu_lockerr(res));
288 syslog(LOG_ERR, "%s: can't lock %s", username, devicename);
289 goto restart;
291 locked = 1;
293 if ((fd = open(devicename, O_RDWR | O_NONBLOCK)) < 0) {
294 syslog(LOG_ERR, "%s: open %s: %m", username, devicename);
295 if (first)
296 down(1);
297 else {
298 if (uucp_lock)
299 uu_unlock(dvname);
300 locked = 0;
301 goto restart;
304 printd(" %d", fd);
305 signal(SIGHUP, sighup);
306 if (ioctl(fd, TIOCSCTTY, 0) < 0) {
307 syslog(LOG_ERR, "%s: ioctl (TIOCSCTTY): %m", username);
308 down(2);
310 if (tcsetpgrp(fd, getpid()) < 0) {
311 syslog(LOG_ERR, "%s: tcsetpgrp failed: %m", username);
312 down(2);
314 printd(", ioctl\n");
315 if (tcgetattr(fd, &t) < 0) {
316 syslog(LOG_ERR, "%s: tcgetattr(%s): %m", username, devicename);
317 down(2);
319 cfmakeraw(&t);
320 switch (flowcontrol) {
321 case FC_HW:
322 t.c_cflag |= (CRTS_IFLOW|CCTS_OFLOW);
323 break;
324 case FC_NONE:
325 t.c_cflag &= ~(CRTS_IFLOW|CCTS_OFLOW);
326 break;
328 if (modem_control)
329 t.c_cflag |= HUPCL;
330 else
331 t.c_cflag &= ~(HUPCL);
332 t.c_cflag |= CLOCAL; /* until modem commands passes */
333 cfsetispeed(&t, speed);
334 cfsetospeed(&t, speed);
335 if (tcsetattr(fd, TCSAFLUSH, &t) < 0) {
336 syslog(LOG_ERR, "%s: tcsetattr(%s): %m", username, devicename);
337 down(2);
339 sleep(2); /* wait for flakey line to settle */
340 if (hup || terminate)
341 goto restart;
343 wfd = fdopen(fd, "w+");
344 if (wfd == NULL) {
345 syslog(LOG_ERR, "%s: can't fdopen %s: %m", username, devicename);
346 down(2);
348 setbuf(wfd, NULL);
350 if (diali > 0)
351 dialerstring = dials[dialc++ % diali];
352 if (dialerstring) {
353 syslog(LOG_INFO, "%s: dialer string: %s\\r", username, dialerstring);
354 fprintf(wfd, "%s\r", dialerstring);
356 printd("\n");
358 fintimeout = time(NULL) + script_timeout;
359 if (modem_control) {
360 printd("waiting for carrier\n");
361 while (time(NULL) < fintimeout && !carrier()) {
362 sleep(1);
363 if (hup || terminate)
364 goto restart;
366 if (!carrier())
367 goto restart;
368 t.c_cflag &= ~(CLOCAL);
369 if (tcsetattr(fd, TCSANOW, &t) < 0) {
370 syslog(LOG_ERR, "%s: tcsetattr(%s): %m", username, devicename);
371 down(2);
373 /* Only now we able to receive HUP on carrier drop! */
377 * Log in
379 printd("look for login: ");
380 for (;;) {
381 if (get_line(buf, BUFSIZ, fd, fintimeout) == 0 || hup || terminate)
382 goto restart;
383 if (annex) {
384 if (bcmp(buf, annex, strlen(annex)) == 0) {
385 fprintf(wfd, "slip\r");
386 printd("Sent \"slip\"\n");
387 continue;
389 if (bcmp(&buf[1], "sername:", 8) == 0) {
390 fprintf(wfd, "%s\r", username);
391 printd("Sent login: %s\n", username);
392 continue;
394 if (bcmp(&buf[1], "assword:", 8) == 0) {
395 fprintf(wfd, "%s\r", password);
396 printd("Sent password: %s\n", password);
397 break;
399 } else {
400 if (strstr(&buf[1], "ogin:") != NULL) {
401 fprintf(wfd, "%s\r", username);
402 printd("Sent login: %s\n", username);
403 continue;
405 if (strstr(&buf[1], "assword:") != NULL) {
406 fprintf(wfd, "%s\r", password);
407 printd("Sent password: %s\n", password);
408 break;
413 sleep(5); /* Wait until login completed */
414 if (hup || terminate)
415 goto restart;
416 start_time = time(NULL);
418 * Attach
420 printd("setd");
421 disc = SLIPDISC;
422 if (ioctl(fd, TIOCSETD, &disc) < 0) {
423 syslog(LOG_ERR, "%s: ioctl (%s, TIOCSETD): %m",
424 username, devicename);
425 down(2);
427 if (sl_unit >= 0 && ioctl(fd, SLIOCSUNIT, &sl_unit) < 0) {
428 syslog(LOG_ERR, "%s: ioctl(SLIOCSUNIT): %m", username);
429 down(2);
431 if (ioctl(fd, SLIOCGUNIT, &unitnum) < 0) {
432 syslog(LOG_ERR, "%s: ioctl(SLIOCGUNIT): %m", username);
433 down(2);
435 sprintf(unitname, "sl%d", unitnum);
437 if (keepal > 0) {
438 signal(SIGURG, sigurg);
439 if (ioctl(fd, SLIOCSKEEPAL, &keepal) < 0) {
440 syslog(LOG_ERR, "%s: ioctl(SLIOCSKEEPAL): %m", username);
441 down(2);
444 if (outfill > 0 && ioctl(fd, SLIOCSOUTFILL, &outfill) < 0) {
445 syslog(LOG_ERR, "%s: ioctl(SLIOCSOUTFILL): %m", username);
446 down(2);
449 sprintf(buf, "LINE=%d %s %s up",
450 diali ? (dialc - 1) % diali : 0,
451 upscript ? upscript : "/sbin/ifconfig" , unitname);
452 system(buf);
454 printd(", ready\n");
455 if (!first)
456 syslog(LOG_INFO, "%s: reconnected on %s (%d tries)", username, unitname, tries);
457 else
458 syslog(LOG_INFO, "%s: connected on %s", username, unitname);
459 first = 0;
460 tries = 0;
461 logged_in = 1;
462 while (hup == 0 && terminate == 0) {
463 sigpause(0L);
464 printd("sigpause return\n");
466 goto restart;
467 return(0); /* not reached */
470 static void
471 sighup(int signo __unused)
473 printd("hup\n");
474 if (hup == 0 && logged_in)
475 syslog(LOG_INFO, "%s: got hangup signal", username);
476 hup = 1;
479 static void
480 sigurg(int signo __unused)
482 printd("urg\n");
483 if (hup == 0 && logged_in)
484 syslog(LOG_INFO, "%s: got dead line signal", username);
485 hup = 1;
488 static void
489 sigterm(int signo __unused)
491 printd("terminate\n");
492 if (terminate == 0 && logged_in)
493 syslog(LOG_INFO, "%s: got terminate signal", username);
494 terminate = 1;
497 static int
498 get_line(char *buf, int size, int this_fd, time_t fintimeout)
500 int i;
501 int ret;
502 fd_set readfds;
503 struct timeval tv;
504 time_t timeout;
506 size--;
507 for (i = 0; i < size; i++) {
508 if (hup || terminate)
509 return (0);
510 if ((timeout = fintimeout - time(NULL)) <= 0)
511 goto tout;
512 FD_ZERO(&readfds);
513 FD_SET(fd, &readfds);
514 tv.tv_sec = timeout;
515 tv.tv_usec = 0;
516 if ((ret = select(this_fd + 1, &readfds, NULL, NULL, &tv)) < 0) {
517 if (errno != EINTR)
518 syslog(LOG_ERR, "%s: get_line: select: %m", username);
519 } else {
520 if (! ret) {
521 tout:
522 printd("get_line: timed out\n");
523 return (0);
525 if ((ret = read(this_fd, &buf[i], 1)) == 1) {
526 buf[i] &= 0177;
527 if (buf[i] == '\r' || buf[i] == '\0') {
528 i--;
529 continue;
531 if (buf[i] != '\n' && buf[i] != ':')
532 continue;
533 buf[i + 1] = '\0';
534 printd("Got %d: %s", i + 1, buf);
535 return (i+1);
537 if (ret <= 0) {
538 if (ret < 0) {
539 syslog(LOG_ERR, "%s: get_line: read: %m", username);
540 } else
541 syslog(LOG_ERR, "%s: read returned 0", username);
542 buf[i] = '\0';
543 printd("returning %d after %d: %s\n", ret, i, buf);
544 return (0);
548 return (0);
551 static int
552 carrier(void)
554 int comstate;
556 if (ioctl(fd, TIOCMGET, &comstate) < 0) {
557 syslog(LOG_ERR, "%s: ioctl (%s, TIOCMGET): %m",
558 username, devicename);
559 down(2);
561 return !!(comstate & TIOCM_CD);
564 static void
565 down(int code)
567 if (fd > -1)
568 close(fd);
569 if (pfd)
570 unlink(my_pidfile);
571 if (uucp_lock && locked)
572 uu_unlock(dvname);
573 exit(code);
576 static void
577 usage(void)
579 fprintf(stderr, "%s\n%s\n%s\n%s\n",
580 "usage: startslip [-d] [-b speed] [-s string1 [-s string2 [...]]] [-h] [-l]",
581 " [-L] [-A annexname] [-U upscript] [-D downscript]",
582 " [-t script_timeout] [-W maxtries] [-w retry_pause]",
583 " [-K keepalive] [-O outfill] [-S unit] device user passwd");
584 exit(1);