dma: treat connect status messages properly
[dragonfly.git] / libexec / dma / net.c
blobf3f2c24c50e6c8d36ca982570856bc920b6c5835
1 /*
2 * Copyright (c) 2008 The DragonFly Project. All rights reserved.
4 * This code is derived from software contributed to The DragonFly Project
5 * by Matthias Schmidt <matthias@dragonflybsd.org>, University of Marburg,
6 * Germany.
8 * Redistribution and use in source and binary forms, with or without
9 * modification, are permitted provided that the following conditions
10 * are met:
12 * 1. Redistributions of source code must retain the above copyright
13 * notice, this list of conditions and the following disclaimer.
14 * 2. Redistributions in binary form must reproduce the above copyright
15 * notice, this list of conditions and the following disclaimer in
16 * the documentation and/or other materials provided with the
17 * distribution.
18 * 3. Neither the name of The DragonFly Project nor the names of its
19 * contributors may be used to endorse or promote products derived
20 * from this software without specific, prior written permission.
22 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
23 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
24 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
25 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
26 * COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
27 * INCIDENTAL, SPECIAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES (INCLUDING,
28 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
29 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
30 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
31 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
32 * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
33 * SUCH DAMAGE.
36 #include <sys/param.h>
37 #include <sys/queue.h>
38 #include <sys/stat.h>
39 #include <sys/types.h>
40 #include <sys/socket.h>
41 #include <netinet/in.h>
42 #include <arpa/inet.h>
44 #include <openssl/ssl.h>
45 #include <openssl/err.h>
47 #include <err.h>
48 #include <errno.h>
49 #include <netdb.h>
50 #include <setjmp.h>
51 #include <signal.h>
52 #include <syslog.h>
53 #include <unistd.h>
55 #include "dma.h"
57 static jmp_buf timeout_alarm;
58 char neterr[BUF_SIZE];
60 char *
61 ssl_errstr(void)
63 long oerr, nerr;
65 oerr = 0;
66 while ((nerr = ERR_get_error()) != 0)
67 oerr = nerr;
69 return (ERR_error_string(oerr, NULL));
72 static void
73 sig_alarm(int signo __unused)
75 longjmp(timeout_alarm, 1);
78 ssize_t
79 send_remote_command(int fd, const char* fmt, ...)
81 va_list va;
82 char cmd[4096];
83 size_t len, pos;
84 int s;
85 ssize_t n;
87 va_start(va, fmt);
88 s = vsnprintf(cmd, sizeof(cmd) - 2, fmt, va);
89 va_end(va);
90 if (s == sizeof(cmd) - 2 || s < 0) {
91 strcpy(neterr, "Internal error: oversized command string");
92 return (-1);
95 /* We *know* there are at least two more bytes available */
96 strcat(cmd, "\r\n");
97 len = strlen(cmd);
99 if (((config.features & SECURETRANS) != 0) &&
100 ((config.features & NOSSL) == 0)) {
101 while ((s = SSL_write(config.ssl, (const char*)cmd, len)) <= 0) {
102 s = SSL_get_error(config.ssl, s);
103 if (s != SSL_ERROR_WANT_READ &&
104 s != SSL_ERROR_WANT_WRITE) {
105 strncpy(neterr, ssl_errstr(), sizeof(neterr));
106 return (-1);
110 else {
111 pos = 0;
112 while (pos < len) {
113 n = write(fd, cmd + pos, len - pos);
114 if (n < 0)
115 return (-1);
116 pos += n;
120 return (len);
124 read_remote(int fd, int extbufsize, char *extbuf)
126 ssize_t rlen = 0;
127 size_t pos, len;
128 char buff[BUF_SIZE];
129 int done = 0, status = 0, extbufpos = 0;
131 if (signal(SIGALRM, sig_alarm) == SIG_ERR) {
132 snprintf(neterr, sizeof(neterr), "SIGALRM error: %s",
133 strerror(errno));
134 return (-1);
136 if (setjmp(timeout_alarm) != 0) {
137 snprintf(neterr, sizeof(neterr), "Timeout reached");
138 return (-1);
140 alarm(CON_TIMEOUT);
143 * Remote reading code from femail.c written by Henning Brauer of
144 * OpenBSD and released under a BSD style license.
146 for (len = pos = 0; !done; ) {
147 rlen = 0;
148 if (pos == 0 ||
149 (pos > 0 && memchr(buff + pos, '\n', len - pos) == NULL)) {
150 memmove(buff, buff + pos, len - pos);
151 len -= pos;
152 pos = 0;
153 if (((config.features & SECURETRANS) != 0) &&
154 (config.features & NOSSL) == 0) {
155 if ((rlen = SSL_read(config.ssl, buff + len,
156 sizeof(buff) - len)) == -1) {
157 strncpy(neterr, ssl_errstr(), sizeof(neterr));
158 return (-1);
160 } else {
161 if ((rlen = read(fd, buff + len, sizeof(buff) - len)) == -1) {
162 strncpy(neterr, strerror(errno), sizeof(neterr));
163 return (-1);
166 len += rlen;
169 * If there is an external buffer with a size bigger than zero
170 * and as long as there is space in the external buffer and
171 * there are new characters read from the mailserver
172 * copy them to the external buffer
174 if (extbufpos <= (extbufsize - 1) && rlen && extbufsize > 0
175 && extbuf != NULL) {
176 /* do not write over the bounds of the buffer */
177 if(extbufpos + rlen > (extbufsize - 1)) {
178 rlen = extbufsize - extbufpos;
180 memcpy(extbuf + extbufpos, buff + len - rlen, rlen);
181 extbufpos += rlen;
183 for (; pos < len && buff[pos] >= '0' && buff[pos] <= '9'; pos++)
184 ; /* Do nothing */
186 if (pos == len)
187 return (0);
189 if (buff[pos] == ' ') {
190 done = 1;
191 } else if (buff[pos] != '-') {
192 strcpy(neterr, "invalid syntax in reply from server");
193 return (-1);
196 /* skip up to \n */
197 for (; pos < len && buff[pos - 1] != '\n'; pos++)
198 ; /* Do nothing */
201 alarm(0);
203 buff[len] = '\0';
204 while (len > 0 && (buff[len - 1] == '\r' || buff[len - 1] == '\n'))
205 buff[--len] = '\0';
206 snprintf(neterr, sizeof(neterr), "%s", buff);
207 status = atoi(buff);
208 return (status/100);
212 * Handle SMTP authentication
214 static int
215 smtp_login(int fd, char *login, char* password)
217 char *temp;
218 int len, res = 0;
220 res = smtp_auth_md5(fd, login, password);
221 if (res == 0) {
222 return (0);
223 } else if (res == -2) {
225 * If the return code is -2, then then the login attempt failed,
226 * do not try other login mechanisms
228 return (1);
231 if ((config.features & INSECURE) != 0 ||
232 (config.features & SECURETRANS) != 0) {
233 /* Send AUTH command according to RFC 2554 */
234 send_remote_command(fd, "AUTH LOGIN");
235 if (read_remote(fd, 0, NULL) != 3) {
236 syslog(LOG_NOTICE, "remote delivery deferred:"
237 " AUTH login not available: %s",
238 neterr);
239 return (1);
242 len = base64_encode(login, strlen(login), &temp);
243 if (len < 0) {
244 encerr:
245 syslog(LOG_ERR, "can not encode auth reply: %m");
246 return (1);
249 send_remote_command(fd, "%s", temp);
250 free(temp);
251 res = read_remote(fd, 0, NULL);
252 if (res != 3) {
253 syslog(LOG_NOTICE, "remote delivery %s: AUTH login failed: %s",
254 res == 5 ? "failed" : "deferred", neterr);
255 return (res == 5 ? -1 : 1);
258 len = base64_encode(password, strlen(password), &temp);
259 if (len < 0)
260 goto encerr;
262 send_remote_command(fd, "%s", temp);
263 free(temp);
264 res = read_remote(fd, 0, NULL);
265 if (res != 2) {
266 syslog(LOG_NOTICE, "remote delivery %s: Authentication failed: %s",
267 res == 5 ? "failed" : "deferred", neterr);
268 return (res == 5 ? -1 : 1);
270 } else {
271 syslog(LOG_WARNING, "non-encrypted SMTP login is disabled in config, so skipping it. ");
272 return (1);
275 return (0);
278 static int
279 open_connection(struct mx_hostentry *h)
281 int fd;
283 syslog(LOG_INFO, "trying remote delivery to %s [%s] pref %d",
284 h->host, h->addr, h->pref);
286 fd = socket(h->ai.ai_family, h->ai.ai_socktype, h->ai.ai_protocol);
287 if (fd < 0) {
288 syslog(LOG_INFO, "socket for %s [%s] failed: %m",
289 h->host, h->addr);
290 return (-1);
293 if (connect(fd, (struct sockaddr *)&h->sa, h->sa.ss_len) < 0) {
294 syslog(LOG_INFO, "connect to %s [%s] failed: %m",
295 h->host, h->addr);
296 close(fd);
297 return (-1);
300 return (fd);
303 static void
304 close_connection(int fd)
306 if (((config.features & SECURETRANS) != 0) &&
307 ((config.features & NOSSL) == 0))
308 SSL_shutdown(config.ssl);
310 if (config.ssl != NULL)
311 SSL_free(config.ssl);
313 close(fd);
316 static int
317 deliver_to_host(struct qitem *it, struct mx_hostentry *host, void *errmsgc)
319 struct authuser *a;
320 char line[1000];
321 size_t linelen;
322 int fd, error = 0, do_auth = 0, res = 0;
324 if (fseek(it->mailf, 0, SEEK_SET) != 0) {
325 asprintf(errmsgc, "can not seek: %s", strerror(errno));
326 return (-1);
329 fd = open_connection(host);
330 if (fd < 0)
331 return (1);
333 #define READ_REMOTE_CHECK(c, exp) \
334 res = read_remote(fd, 0, NULL); \
335 if (res == 5) { \
336 syslog(LOG_ERR, "remote delivery to %s [%s] failed after %s: %s", \
337 host->host, host->addr, c, neterr); \
338 asprintf(errmsgc, "%s [%s] did not like our %s:\n%s", \
339 host->host, host->addr, c, neterr); \
340 return (-1); \
341 } else if (res != exp) { \
342 syslog(LOG_NOTICE, "remote delivery deferred: %s [%s] failed after %s: %s", \
343 host->host, host->addr, c, neterr); \
344 return (1); \
347 /* Check first reply from remote host */
348 config.features |= NOSSL;
349 READ_REMOTE_CHECK("connect", 2);
351 config.features &= ~NOSSL;
353 if ((config.features & SECURETRANS) != 0) {
354 error = smtp_init_crypto(fd, config.features);
355 if (error >= 0)
356 syslog(LOG_DEBUG, "SSL initialization successful");
357 else
358 goto out;
361 /* XXX allow HELO fallback */
362 /* XXX record ESMTP keywords */
363 send_remote_command(fd, "EHLO %s", hostname());
364 READ_REMOTE_CHECK("EHLO", 2);
367 * Use SMTP authentication if the user defined an entry for the remote
368 * or smarthost
370 SLIST_FOREACH(a, &authusers, next) {
371 if (strcmp(a->host, host->host) == 0) {
372 do_auth = 1;
373 break;
377 if (do_auth == 1) {
379 * Check if the user wants plain text login without using
380 * encryption.
382 syslog(LOG_INFO, "using SMTP authentication for user %s", a->login);
383 error = smtp_login(fd, a->login, a->password);
384 if (error < 0) {
385 syslog(LOG_ERR, "remote delivery failed:"
386 " SMTP login failed: %m");
387 asprintf(errmsgc, "SMTP login to %s failed", host->host);
388 return (-1);
390 /* SMTP login is not available, so try without */
391 else if (error > 0) {
392 syslog(LOG_WARNING, "SMTP login not available. Trying without.");
396 /* XXX send ESMTP ENVID, RET (FULL/HDRS) and 8BITMIME */
397 send_remote_command(fd, "MAIL FROM:<%s>", it->sender);
398 READ_REMOTE_CHECK("MAIL FROM", 2);
400 /* XXX send ESMTP ORCPT */
401 send_remote_command(fd, "RCPT TO:<%s>", it->addr);
402 READ_REMOTE_CHECK("RCPT TO", 2);
404 send_remote_command(fd, "DATA");
405 READ_REMOTE_CHECK("DATA", 3);
407 error = 0;
408 while (!feof(it->mailf)) {
409 if (fgets(line, sizeof(line), it->mailf) == NULL)
410 break;
411 linelen = strlen(line);
412 if (linelen == 0 || line[linelen - 1] != '\n') {
413 syslog(LOG_CRIT, "remote delivery failed: corrupted queue file");
414 *(const char **)errmsgc = "corrupted queue file";
415 error = -1;
416 goto out;
419 /* Remove trailing \n's and escape leading dots */
420 trim_line(line);
423 * If the first character is a dot, we escape it so the line
424 * length increases
426 if (line[0] == '.')
427 linelen++;
429 if (send_remote_command(fd, "%s", line) != (ssize_t)linelen+1) {
430 syslog(LOG_NOTICE, "remote delivery deferred: write error");
431 error = 1;
432 goto out;
436 send_remote_command(fd, ".");
437 READ_REMOTE_CHECK("final DATA", 2);
439 send_remote_command(fd, "QUIT");
440 if (read_remote(fd, 0, NULL) != 2)
441 syslog(LOG_INFO, "remote delivery succeeded but QUIT failed: %s", neterr);
442 out:
444 close_connection(fd);
445 return (error);
449 deliver_remote(struct qitem *it, const char **errmsg)
451 /* asprintf can't take const */
452 void *errmsgc = __DECONST(char **, errmsg);
453 struct mx_hostentry *hosts, *h;
454 const char *host;
455 int port;
456 int error = 1, smarthost = 0;
458 host = strrchr(it->addr, '@');
459 /* Should not happen */
460 if (host == NULL) {
461 asprintf(errmsgc, "Internal error: badly formed address %s",
462 it->addr);
463 return(-1);
464 } else {
465 /* Step over the @ */
466 host++;
469 port = SMTP_PORT;
471 /* Smarthost support? */
472 if (config.smarthost != NULL) {
473 host = config.smarthost;
474 port = config.port;
475 syslog(LOG_INFO, "using smarthost (%s:%i)", host, port);
476 smarthost = 1;
479 error = dns_get_mx_list(host, port, &hosts, smarthost);
480 if (error) {
481 syslog(LOG_NOTICE, "remote delivery %s: DNS failure (%s)",
482 error < 0 ? "failed" : "deferred",
483 host);
484 return (error);
487 for (h = hosts; *h->host != 0; h++) {
488 switch (deliver_to_host(it, h, errmsgc)) {
489 case 0:
490 /* success */
491 error = 0;
492 goto out;
493 case 1:
494 /* temp failure */
495 error = 1;
496 break;
497 default:
498 /* perm failure */
499 error = -1;
500 goto out;
503 out:
504 free(hosts);
506 return (error);