contrib/tcpdump-3.9/ieee802_11_radio.h

   1 /* $FreeBSD: src/sys/net80211/ieee80211_radiotap.h,v 1.5 2005/01/22 20:12:05 sam Exp $ */
   2 /* $NetBSD: ieee802_11_radio.h,v 1.2 2006/02/26 03:04:03 dyoung Exp $ */
   3 /* $Header: /tcpdump/master/tcpdump/ieee802_11_radio.h,v 1.1.2.1 2006/06/13 22:24:45 guy Exp $ */
   4
   5 /*-
   6  * Copyright (c) 2003, 2004 David Young.  All rights reserved.
   7  *
   8  * Redistribution and use in source and binary forms, with or without
   9  * modification, are permitted provided that the following conditions
  10  * are met:
  11  * 1. Redistributions of source code must retain the above copyright
  12  *    notice, this list of conditions and the following disclaimer.
  13  * 2. Redistributions in binary form must reproduce the above copyright
  14  *    notice, this list of conditions and the following disclaimer in the
  15  *    documentation and/or other materials provided with the distribution.
  16  * 3. The name of David Young may not be used to endorse or promote
  17  *    products derived from this software without specific prior
  18  *    written permission.
  19  *
  20  * THIS SOFTWARE IS PROVIDED BY DAVID YOUNG ``AS IS'' AND ANY
  21  * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
  22  * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
  23  * PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL DAVID
  24  * YOUNG BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
  25  * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
  26  * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
  27  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
  28  * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
  29  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
  30  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
  31  * OF SUCH DAMAGE.
  32  */
  33 #ifndef _NET_IF_IEEE80211RADIOTAP_H_
  34 #define _NET_IF_IEEE80211RADIOTAP_H_
  35
  36 /* A generic radio capture format is desirable. There is one for
  37  * Linux, but it is neither rigidly defined (there were not even
  38  * units given for some fields) nor easily extensible.
  39  *
  40  * I suggest the following extensible radio capture format. It is
  41  * based on a bitmap indicating which fields are present.
  42  *
  43  * I am trying to describe precisely what the application programmer
  44  * should expect in the following, and for that reason I tell the
  45  * units and origin of each measurement (where it applies), or else I
  46  * use sufficiently weaselly language ("is a monotonically nondecreasing
  47  * function of...") that I cannot set false expectations for lawyerly
  48  * readers.
  49  */
  50 #if defined(__KERNEL__) || defined(_KERNEL)
  51 #ifndef DLT_IEEE802_11_RADIO
  52 #define DLT_IEEE802_11_RADIO    127     /* 802.11 plus WLAN header */
  53 #endif
  54 #endif /* defined(__KERNEL__) || defined(_KERNEL) */
  55
  56 /* The radio capture header precedes the 802.11 header. */
  57 struct ieee80211_radiotap_header {
  58         u_int8_t        it_version;     /* Version 0. Only increases
  59                                          * for drastic changes,
  60                                          * introduction of compatible
  61                                          * new fields does not count.
  62                                          */
  63         u_int8_t        it_pad;
  64         u_int16_t       it_len;         /* length of the whole
  65                                          * header in bytes, including
  66                                          * it_version, it_pad,
  67                                          * it_len, and data fields.
  68                                          */
  69         u_int32_t       it_present;     /* A bitmap telling which
  70                                          * fields are present. Set bit 31
  71                                          * (0x80000000) to extend the
  72                                          * bitmap by another 32 bits.
  73                                          * Additional extensions are made
  74                                          * by setting bit 31.
  75                                          */
  76 } __attribute__((__packed__));
  77
  78 /* Name                                 Data type       Units
  79  * ----                                 ---------       -----
  80  *
  81  * IEEE80211_RADIOTAP_TSFT              u_int64_t       microseconds
  82  *
  83  *      Value in microseconds of the MAC's 64-bit 802.11 Time
  84  *      Synchronization Function timer when the first bit of the
  85  *      MPDU arrived at the MAC. For received frames, only.
  86  *
  87  * IEEE80211_RADIOTAP_CHANNEL           2 x u_int16_t   MHz, bitmap
  88  *
  89  *      Tx/Rx frequency in MHz, followed by flags (see below).
  90  *
  91  * IEEE80211_RADIOTAP_FHSS              u_int16_t       see below
  92  *
  93  *      For frequency-hopping radios, the hop set (first byte)
  94  *      and pattern (second byte).
  95  *
  96  * IEEE80211_RADIOTAP_RATE              u_int8_t        500kb/s
  97  *
  98  *      Tx/Rx data rate
  99  *
 100  * IEEE80211_RADIOTAP_DBM_ANTSIGNAL     int8_t          decibels from
 101  *                                                      one milliwatt (dBm)
 102  *
 103  *      RF signal power at the antenna, decibel difference from
 104  *      one milliwatt.
 105  *
 106  * IEEE80211_RADIOTAP_DBM_ANTNOISE      int8_t          decibels from
 107  *                                                      one milliwatt (dBm)
 108  *
 109  *      RF noise power at the antenna, decibel difference from one
 110  *      milliwatt.
 111  *
 112  * IEEE80211_RADIOTAP_DB_ANTSIGNAL      u_int8_t        decibel (dB)
 113  *
 114  *      RF signal power at the antenna, decibel difference from an
 115  *      arbitrary, fixed reference.
 116  *
 117  * IEEE80211_RADIOTAP_DB_ANTNOISE       u_int8_t        decibel (dB)
 118  *
 119  *      RF noise power at the antenna, decibel difference from an
 120  *      arbitrary, fixed reference point.
 121  *
 122  * IEEE80211_RADIOTAP_LOCK_QUALITY      u_int16_t       unitless
 123  *
 124  *      Quality of Barker code lock. Unitless. Monotonically
 125  *      nondecreasing with "better" lock strength. Called "Signal
 126  *      Quality" in datasheets.  (Is there a standard way to measure
 127  *      this?)
 128  *
 129  * IEEE80211_RADIOTAP_TX_ATTENUATION    u_int16_t       unitless
 130  *
 131  *      Transmit power expressed as unitless distance from max
 132  *      power set at factory calibration.  0 is max power.
 133  *      Monotonically nondecreasing with lower power levels.
 134  *
 135  * IEEE80211_RADIOTAP_DB_TX_ATTENUATION u_int16_t       decibels (dB)
 136  *
 137  *      Transmit power expressed as decibel distance from max power
 138  *      set at factory calibration.  0 is max power.  Monotonically
 139  *      nondecreasing with lower power levels.
 140  *
 141  * IEEE80211_RADIOTAP_DBM_TX_POWER      int8_t          decibels from
 142  *                                                      one milliwatt (dBm)
 143  *
 144  *      Transmit power expressed as dBm (decibels from a 1 milliwatt
 145  *      reference). This is the absolute power level measured at
 146  *      the antenna port.
 147  *
 148  * IEEE80211_RADIOTAP_FLAGS             u_int8_t        bitmap
 149  *
 150  *      Properties of transmitted and received frames. See flags
 151  *      defined below.
 152  *
 153  * IEEE80211_RADIOTAP_ANTENNA           u_int8_t        antenna index
 154  *
 155  *      Unitless indication of the Rx/Tx antenna for this packet.
 156  *      The first antenna is antenna 0.
 157  *
 158  * IEEE80211_RADIOTAP_FCS               u_int32_t       data
 159  *
 160  *      FCS from frame in network byte order.
 161  */
 162 enum ieee80211_radiotap_type {
 163         IEEE80211_RADIOTAP_TSFT = 0,
 164         IEEE80211_RADIOTAP_FLAGS = 1,
 165         IEEE80211_RADIOTAP_RATE = 2,
 166         IEEE80211_RADIOTAP_CHANNEL = 3,
 167         IEEE80211_RADIOTAP_FHSS = 4,
 168         IEEE80211_RADIOTAP_DBM_ANTSIGNAL = 5,
 169         IEEE80211_RADIOTAP_DBM_ANTNOISE = 6,
 170         IEEE80211_RADIOTAP_LOCK_QUALITY = 7,
 171         IEEE80211_RADIOTAP_TX_ATTENUATION = 8,
 172         IEEE80211_RADIOTAP_DB_TX_ATTENUATION = 9,
 173         IEEE80211_RADIOTAP_DBM_TX_POWER = 10,
 174         IEEE80211_RADIOTAP_ANTENNA = 11,
 175         IEEE80211_RADIOTAP_DB_ANTSIGNAL = 12,
 176         IEEE80211_RADIOTAP_DB_ANTNOISE = 13,
 177         IEEE80211_RADIOTAP_EXT = 31
 178 };
 179
 180 #ifndef _KERNEL
 181 /* Channel flags. */
 182 #define IEEE80211_CHAN_TURBO    0x0010  /* Turbo channel */
 183 #define IEEE80211_CHAN_CCK      0x0020  /* CCK channel */
 184 #define IEEE80211_CHAN_OFDM     0x0040  /* OFDM channel */
 185 #define IEEE80211_CHAN_2GHZ     0x0080  /* 2 GHz spectrum channel. */
 186 #define IEEE80211_CHAN_5GHZ     0x0100  /* 5 GHz spectrum channel */
 187 #define IEEE80211_CHAN_PASSIVE  0x0200  /* Only passive scan allowed */
 188 #define IEEE80211_CHAN_DYN      0x0400  /* Dynamic CCK-OFDM channel */
 189 #define IEEE80211_CHAN_GFSK     0x0800  /* GFSK channel (FHSS PHY) */
 190 #endif /* !_KERNEL */
 191
 192 /* For IEEE80211_RADIOTAP_FLAGS */
 193 #define IEEE80211_RADIOTAP_F_CFP        0x01    /* sent/received
 194                                                  * during CFP
 195                                                  */
 196 #define IEEE80211_RADIOTAP_F_SHORTPRE   0x02    /* sent/received
 197                                                  * with short
 198                                                  * preamble
 199                                                  */
 200 #define IEEE80211_RADIOTAP_F_WEP        0x04    /* sent/received
 201                                                  * with WEP encryption
 202                                                  */
 203 #define IEEE80211_RADIOTAP_F_FRAG       0x08    /* sent/received
 204                                                  * with fragmentation
 205                                                  */
 206 #define IEEE80211_RADIOTAP_F_FCS        0x10    /* frame includes FCS */
 207 #define IEEE80211_RADIOTAP_F_DATAPAD    0x20    /* frame has padding between
 208                                                  * 802.11 header and payload
 209                                                  * (to 32-bit boundary)
 210                                                  */
 211 #define IEEE80211_RADIOTAP_F_BADFCS     0x40    /* does not pass FCS check */
 212
 213 #endif /* _NET_IF_IEEE80211RADIOTAP_H_ */