oops - forogot to mention the new support here.
[binutils.git] / gas / NEWS
blob7df8a45ef8ed03dbb7b9ca2ffd756f42138ac786
1 -*- text -*-
3 * Support for Renesas M32R2 added.
5 * Limited support for Mapping Symbols as specified in the ARM ELF specification
6   has been added to the arm assembler.
8 * On ARM architectures, added a new gas directive ".unreq" that undoes
9   definitions created by ".req".
11 * Support for Motorola ColdFire MCF528x added.
13 * Added --gstabs+ switch to enable the generation of STABS debug format
14   information with GNU extensions.
16 * Added support for MIPS64 Release 2.
18 * Added support for v850e1.
20 * Added -n switch for x86 assembler.  By default, x86 GAS replaces
21   multiple nop instructions used for alignment within code sections
22   with multi-byte nop instructions such as leal 0(%esi,1),%esi.  This
23   switch disables the optimization.
25 Changes in 2.14:
27 * Added support for MIPS32 Release 2.
29 * Added support for Xtensa architecture.
31 * Support for Intel's iWMMXt processor (an ARM variant) added.
33 * An assembler test generator has been contributed and an example file that
34   uses it (gas/testsuite/gas/all/test-gen.c and test-exmaple.c).
35   
36 * Support for SH2E added.
38 * GASP has now been removed.
40 * Support for Texas Instruments TMS320C4x and TMS320C3x series of
41   DSP's contributed by Michael Hayes and Svein E. Seldal.
42   
43 * Support for the Ubicom IP2xxx microcontroller added.
45 Changes in 2.13:
47 * Support for the Fujitsu FRV architecture added by Red Hat. Models for FR400
48   and FR500 included.
50 * Support for DLX processor added.
52 * GASP has now been deprecated and will be removed in a future release.  Use
53   the macro facilities in GAS instead.
55 * GASP now correctly parses floating point numbers. Unless the base is
56   explicitly specified, they are interpreted as decimal numbers regardless of
57   the currently specified base.
59 Changes in 2.12:
61 * Support for Don Knuth's MMIX, by Hans-Peter Nilsson.
63 * Support for the OpenRISC 32-bit embedded processor by OpenCores.
65 * The ARM assembler now accepts -march=..., -mcpu=... and -mfpu=... for 
66   specifying the target instruction set.  The old method of specifying the 
67   target processor has been deprecated, but is still accepted for
68   compatibility.
70 * Support for the VFP floating-point instruction set has been added to
71   the ARM assembler.
73 * New psuedo op: .incbin to include a set of binary data at a given point
74   in the assembly.  Contributed by Anders Norlander.
76 * The MIPS assembler now accepts -march/-mtune. -mcpu has been deprecated
77   but still works for compatability.
79 * The MIPS assembler no longer issues a warning by default when it 
80   generates a nop instruction from a macro. The new command line option
81   -n will turn on the warning.
83 Changes in 2.11:
85 * Support for PDP-11 and 2.11BSD a.out format, by Lars Brinkhoff.
87 * x86 gas now supports the full Pentium4 instruction set.
89 * Support for AMD x86-64 architecture, by Jan Hubicka, SuSE Labs.
91 * Support for Motorola 68HC11 and 68HC12.
93 * Support for Texas Instruments TMS320C54x (tic54x).
95 * Support for IA-64.
97 * Support for i860, by Jason Eckhardt.
99 * Support for CRIS (Axis Communications ETRAX series).
101 * x86 gas has a new .arch pseudo op to specify the target CPU architecture.
103 * x86 gas -q command line option quietens warnings about register size changes
104   due to suffix, indirect jmp/call without `*', stand-alone prefixes, and
105   translating various deprecated floating point instructions.
107 Changes in 2.10:
109 * Support for the ARM msr instruction was changed to only allow an immediate
110   operand when altering the flags field.
112 * Support for ATMEL AVR.
114 * Support for IBM 370 ELF.  Somewhat experimental.
116 * Support for numbers with suffixes.
118 * Added support for breaking to the end of repeat loops.
120 * Added support for parallel instruction syntax (DOUBLEBAR_PARALLEL).
122 * New .elseif pseudo-op added.
124 * New --fatal-warnings option.
126 * picoJava architecture support added.
128 * Motorola MCore 210 processor support added.
130 * A new pseudo-op .intel_syntax has been implemented to allow gas to parse i386 
131   assembly programs with intel syntax.
133 * New pseudo-ops .func,.endfunc to aid in debugging user-written assembler code.
135 * Added -gdwarf2 option to generate DWARF 2 debugging information.
137 * Full 16-bit mode support for i386.
139 * Greatly improved instruction operand checking for i386.  This change will 
140   produce errors or warnings on incorrect assembly code that previous versions
141   of gas accepted.  If you get unexpected messages from code that worked with
142   older versions of gas, please double check the code before reporting a bug.
144 * Weak symbol support added for COFF targets.
146 * Mitsubishi D30V support added.
148 * Texas Instruments c80 (tms320c80) support added.
150 * i960 ELF support added.
152 * ARM ELF support added.
154 Changes in 2.9:
156 * Texas Instruments c30 (tms320c30) support added.
158 * The assembler now optimizes the exception frame information generated by egcs 
159   and gcc 2.8.  The new --traditional-format option disables this optimization.
161 * Added --gstabs option to generate stabs debugging information.
163 * The -a option takes a new suboption, m (e.g., -alm) to expand macros in a 
164   listing.
166 * Added -MD option to print dependencies.
168 Changes in 2.8:
170 * BeOS support added.
172 * MIPS16 support added.
174 * Motorola ColdFire 5200 support added (configure for m68k and use -m5200).
176 * Alpha/VMS support added.
178 * m68k options --base-size-default-16, --base-size-default-32,
179   --disp-size-default-16, and --disp-size-default-32 added.
181 * The alignment directives now take an optional third argument, which is the
182   maximum number of bytes to skip.  If doing the alignment would require
183   skipping more than the given number of bytes, the alignment is not done at
184   all.
186 * The ELF assembler has a new pseudo-op, .symver, used for symbol versioning.
188 * The -a option takes a new suboption, c (e.g., -alc), to skip false
189   conditionals in listings.
191 * Added new pseudo-op, .equiv; it's like .equ, except that it is an error if
192   the symbol is already defined.
194 Changes in 2.7:
196 * The PowerPC assembler now allows the use of symbolic register names (r0,
197   etc.) if -mregnames is used.  Symbolic names preceded by a '%' (%r0, etc.)
198   can be used any time.  PowerPC 860 move to/from SPR instructions have been
199   added.
201 * Alpha Linux (ELF) support added.
203 * PowerPC ELF support added.
205 * m68k Linux (ELF) support added.
207 * i960 Hx/Jx support added.
209 * i386/PowerPC gnu-win32 support added.
211 * SCO ELF support added.  For OpenServer 5 targets (i386-unknown-sco3.2v5) the
212   default is to build COFF-only support.  To get a set of tools that generate
213   ELF (they'll understand both COFF and ELF), you must configure with 
214   target=i386-unknown-sco3.2v5elf.
216 * m88k-motorola-sysv3* support added.
218 Changes in 2.6:
220 * Gas now directly supports macros, without requiring GASP.
222 * Gas now has an MRI assembler compatibility mode.  Use -M or --mri to select
223   MRI mode.  The pseudo-op ``.mri 1'' will switch into the MRI mode until the
224   ``.mri 0'' is seen; this can be convenient for inline assembler code.
226 * Added --defsym SYM=VALUE option.
228 * Added -mips4 support to MIPS assembler.
230 * Added PIC support to Solaris and SPARC SunOS 4 assembler.
232 Changes in 2.4:
234 * Converted this directory to use an autoconf-generated configure script.
236 * ARM support, from Richard Earnshaw.
238 * Updated VMS support, from Pat Rankin, including considerably improved
239   debugging support.
241 * Support for the control registers in the 68060.
243 * Handles (ignores) a new directive ".this_GCC_requires_the_GNU_assembler", to
244   provide for possible future gcc changes, for targets where gas provides some 
245   features not available in the native assembler.  If the native assembler is 
246   used, it should become obvious pretty quickly what the problem is.
248 * Usage message is available with "--help".
250 * The GNU Assembler Preprocessor (gasp) is included.  (Actually, it was in 2.3 
251   also, but didn't get into the NEWS file.)
253 * Weak symbol support for a.out.
255 * A bug in the listing code which could cause an infinite loop has been fixed. 
256   Bugs in listings when generating a COFF object file have also been fixed.
258 * Initial i386-svr4 PIC implementation from Eric Youngdale, based on code by
259   Paul Kranenburg.
261 * Improved Alpha support.  Immediate constants can have a much larger range
262   now. Support for the 21164 has been contributed by Digital.
264 * Updated ns32k (pc532-mach, netbsd532) support from Ian Dall.
266 Changes in 2.3:
268 * Mach i386 support, by David Mackenzie and Ken Raeburn.
270 * RS/6000 and PowerPC support by Ian Taylor.
272 * VMS command scripts (make-gas.com, config-gas.com) have been worked on a bit,
273   based on mail received from various people.  The `-h#' option should work
274   again too.
276 * HP-PA work, by Jeff Law.  Note, for the PA, gas-2.3 has been designed to work
277   with gdb-4.12 and gcc-2.6.  As gcc-2.6 has not been released yet, a special 
278   version of gcc-2.5.8 has been patched to work with gas-2.3.  You can retrieve
279   this special version of gcc-2.5.8 via anonymous ftp from jaguar.cs.utah.edu
280   in the "dist" directory.
282 * Vax support in gas fixed for BSD, so it builds and seems to run a couple
283   simple tests okay.  I haven't put it through extensive testing.  (GNU make is
284   currently required for BSD 4.3 builds.)
286 * Support for the DEC Alpha, running OSF/1 (ECOFF format).  The gas support is 
287   based on code donated by CMU, which used an a.out-based format.  I'm afraid
288   the alpha-a.out support is pretty badly mangled, and much of it removed;
289   making it work will require rewriting it as BFD support for the format anyways.
291 * Irix 5 support.
293 * The test suites have been fixed up a bit, so that they should work with a 
294   couple different versions of expect and dejagnu.
296 * Symbols' values are now handled internally as expressions, permitting more 
297   flexibility in evaluating them in some cases.  Some details of relocation 
298   handling have also changed, and simple constant pool management has been
299   added, to make the Alpha port easier.
301 * New option "--statistics" for printing out program run times.  This is
302   intended to be used with the gcc "-Q" option, which prints out times spent in
303   various phases of compilation.  (You should be able to get all of them
304   printed out with "gcc -Q -Wa,--statistics", I think.)
306 Changes in 2.2:
308 * RS/6000 AIX and MIPS SGI Irix 5 support has been added.
310 * Configurations that are still in development (and therefore are convenient to 
311   have listed in configure.in) still get rejected without a minor change to 
312   gas/Makefile.in, so people not doing development work shouldn't get the
313   impression that support for such configurations is actually believed to be
314   reliable.
316 * The program name (usually "as") is printed when a fatal error message is 
317   displayed.  This should prevent some confusion about the source of occasional
318   messages about "internal errors".
320 * ELF support is falling into place.  Support for the 386 should be working. 
321   Support for SPARC Solaris is in.  HPPA support from Utah is being integrated.
323 * Symbol values are maintained as expressions instead of being immediately
324   boiled down to add-symbol, sub-symbol, and constant.  This permits slightly
325   more complex calculations involving symbols whose values are not alreadey
326   known.
328 * DBX-style debugging info ("stabs") is now supported for COFF formats.
329   If any stabs directives are seen in the source, GAS will create two new 
330   sections: a ".stab" and a ".stabstr" section.  The format of the .stab 
331   section is nearly identical to the a.out symbol format, and .stabstr is
332   its string table.  For this to be useful, you must have configured GCC
333   to generate stabs (by defining DBX_DEBUGGING_INFO), and must have a GDB
334   that can use the stab sections (4.11 or later).
336 * LynxOS, on i386 and m68k platforms, is now supported.  SPARC LynxOS 
337   support is in progress.
339 Changes in 2.1:
341 * Several small fixes for i386-aix (PS/2) support from Minh Tran-Le have been 
342   incorporated, but not well tested yet.
344 * Altered the opcode table split for m68k; it should require less VM to compile 
345   with gcc now.
347 * Some minor adjustments to add (Convergent Technologies') Miniframe support,
348   suggested by Ronald Cole.
350 * HPPA support (running OSF only, not HPUX) has been contributed by Utah.  This
351   includes improved ELF support, which I've started adapting for SPARC Solaris
352   2.x.  Integration isn't completely, so it probably won't work.
354 * HP9000/300 support, donated by HP, has been merged in.
356 * Ian Taylor has finished the MIPS ECOFF (Ultrix, Irix) support.
358 * Better error messages for unsupported configurations (e.g., hppa-hpux).
360 * Test suite framework is starting to become reasonable.
362 Changes in 2.0:
364 * Mostly bug fixes.
366 * Some more merging of BFD and ELF code, but ELF still doesn't work.
368 Changes in 1.94:
370 * BFD merge is partly done.  Adventurous souls may try giving configure the
371   "--with-bfd-assembler" option.  Currently, ELF format requires it, a.out
372   format accepts it; SPARC CPU accepts it.  It's the default only for OS "elf"
373   or "solaris".  (ELF isn't really supported yet.  It needs work.  I've got
374   some code from Utah for HP-PA ELF, and from DG for m88k ELF, but they're not
375   fully merged yet.)
377 * The 68K opcode table has been split in half.  It should now compile under gcc
378   without consuming ridiculous amounts of memory.
380 * A couple data structures have been reduced in size.  This should result in
381   saving a little bit of space at runtime.
383 * Support for MIPS, from OSF and Ralph Campbell, has been merged in.  The OSF
384   code provided ROSE format support, which I haven't merged in yet.  (I can
385   make it available, if anyone wants to try it out.)  Ralph's code, for BSD
386   4.4, supports a.out format.  We don't have ECOFF support in just yet; it's
387   coming.
389 * Support for the Hitachi H8/500 has been added.
391 * VMS host and target support should be working now, thanks chiefly to Eric
392   Youngdale.
394 Changes in 1.93.01:
396 * For m68k, support for more processors has been added: 68040, CPU32, 68851.
398 * For i386, .align is now power-of-two; was number-of-bytes.
400 * For m68k, "%" is now accepted before register names.  For COFF format, which
401   doesn't use underscore prefixes for C labels, it is required, so variable "a0"
402   can be distinguished from the register.
404 * Last public release was 1.38.  Lots of configuration changes since then, lots
405   of new CPUs and formats, lots of bugs fixed.
408 Local variables:
409 fill-column: 79
410 End: