bfd/reloc.c

   1 /* BFD support for handling relocation entries.
   2    Copyright 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
   3    2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
   4    Free Software Foundation, Inc.
   5    Written by Cygnus Support.
   6
   7    This file is part of BFD, the Binary File Descriptor library.
   8
   9    This program is free software; you can redistribute it and/or modify
  10    it under the terms of the GNU General Public License as published by
  11    the Free Software Foundation; either version 3 of the License, or
  12    (at your option) any later version.
  13
  14    This program is distributed in the hope that it will be useful,
  15    but WITHOUT ANY WARRANTY; without even the implied warranty of
  16    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17    GNU General Public License for more details.
  18
  19    You should have received a copy of the GNU General Public License
  20    along with this program; if not, write to the Free Software
  21    Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston,
  22    MA 02110-1301, USA.  */
  23
  24 /*
  25 SECTION
  26         Relocations
  27
  28         BFD maintains relocations in much the same way it maintains
  29         symbols: they are left alone until required, then read in
  30         en-masse and translated into an internal form.  A common
  31         routine <<bfd_perform_relocation>> acts upon the
  32         canonical form to do the fixup.
  33
  34         Relocations are maintained on a per section basis,
  35         while symbols are maintained on a per BFD basis.
  36
  37         All that a back end has to do to fit the BFD interface is to create
  38         a <<struct reloc_cache_entry>> for each relocation
  39         in a particular section, and fill in the right bits of the structures.
  40
  41 @menu
  42 @* typedef arelent::
  43 @* howto manager::
  44 @end menu
  45
  46 */
  47
  48 /* DO compile in the reloc_code name table from libbfd.h.  */
  49 #define _BFD_MAKE_TABLE_bfd_reloc_code_real
  50
  51 #include "sysdep.h"
  52 #include "bfd.h"
  53 #include "bfdlink.h"
  54 #include "libbfd.h"
  55 /*
  56 DOCDD
  57 INODE
  58         typedef arelent, howto manager, Relocations, Relocations
  59
  60 SUBSECTION
  61         typedef arelent
  62
  63         This is the structure of a relocation entry:
  64
  65 CODE_FRAGMENT
  66 .
  67 .typedef enum bfd_reloc_status
  68 .{
  69 .  {* No errors detected.  *}
  70 .  bfd_reloc_ok,
  71 .
  72 .  {* The relocation was performed, but there was an overflow.  *}
  73 .  bfd_reloc_overflow,
  74 .
  75 .  {* The address to relocate was not within the section supplied.  *}
  76 .  bfd_reloc_outofrange,
  77 .
  78 .  {* Used by special functions.  *}
  79 .  bfd_reloc_continue,
  80 .
  81 .  {* Unsupported relocation size requested.  *}
  82 .  bfd_reloc_notsupported,
  83 .
  84 .  {* Unused.  *}
  85 .  bfd_reloc_other,
  86 .
  87 .  {* The symbol to relocate against was undefined.  *}
  88 .  bfd_reloc_undefined,
  89 .
  90 .  {* The relocation was performed, but may not be ok - presently
  91 .     generated only when linking i960 coff files with i960 b.out
  92 .     symbols.  If this type is returned, the error_message argument
  93 .     to bfd_perform_relocation will be set.  *}
  94 .  bfd_reloc_dangerous
  95 . }
  96 . bfd_reloc_status_type;
  97 .
  98 .
  99 .typedef struct reloc_cache_entry
 100 .{
 101 .  {* A pointer into the canonical table of pointers.  *}
 102 .  struct bfd_symbol **sym_ptr_ptr;
 103 .
 104 .  {* offset in section.  *}
 105 .  bfd_size_type address;
 106 .
 107 .  {* addend for relocation value.  *}
 108 .  bfd_vma addend;
 109 .
 110 .  {* Pointer to how to perform the required relocation.  *}
 111 .  reloc_howto_type *howto;
 112 .
 113 .}
 114 .arelent;
 115 .
 116 */
 117
 118 /*
 119 DESCRIPTION
 120
 121         Here is a description of each of the fields within an <<arelent>>:
 122
 123         o <<sym_ptr_ptr>>
 124
 125         The symbol table pointer points to a pointer to the symbol
 126         associated with the relocation request.  It is the pointer
 127         into the table returned by the back end's
 128         <<canonicalize_symtab>> action. @xref{Symbols}. The symbol is
 129         referenced through a pointer to a pointer so that tools like
 130         the linker can fix up all the symbols of the same name by
 131         modifying only one pointer. The relocation routine looks in
 132         the symbol and uses the base of the section the symbol is
 133         attached to and the value of the symbol as the initial
 134         relocation offset. If the symbol pointer is zero, then the
 135         section provided is looked up.
 136
 137         o <<address>>
 138
 139         The <<address>> field gives the offset in bytes from the base of
 140         the section data which owns the relocation record to the first
 141         byte of relocatable information. The actual data relocated
 142         will be relative to this point; for example, a relocation
 143         type which modifies the bottom two bytes of a four byte word
 144         would not touch the first byte pointed to in a big endian
 145         world.
 146
 147         o <<addend>>
 148
 149         The <<addend>> is a value provided by the back end to be added (!)
 150         to the relocation offset. Its interpretation is dependent upon
 151         the howto. For example, on the 68k the code:
 152
 153 |        char foo[];
 154 |        main()
 155 |                {
 156 |                return foo[0x12345678];
 157 |                }
 158
 159         Could be compiled into:
 160
 161 |        linkw fp,#-4
 162 |        moveb @@#12345678,d0
 163 |        extbl d0
 164 |        unlk fp
 165 |        rts
 166
 167         This could create a reloc pointing to <<foo>>, but leave the
 168         offset in the data, something like:
 169
 170 |RELOCATION RECORDS FOR [.text]:
 171 |offset   type      value
 172 |00000006 32        _foo
 173 |
 174 |00000000 4e56 fffc          ; linkw fp,#-4
 175 |00000004 1039 1234 5678     ; moveb @@#12345678,d0
 176 |0000000a 49c0               ; extbl d0
 177 |0000000c 4e5e               ; unlk fp
 178 |0000000e 4e75               ; rts
 179
 180         Using coff and an 88k, some instructions don't have enough
 181         space in them to represent the full address range, and
 182         pointers have to be loaded in two parts. So you'd get something like:
 183
 184 |        or.u     r13,r0,hi16(_foo+0x12345678)
 185 |        ld.b     r2,r13,lo16(_foo+0x12345678)
 186 |        jmp      r1
 187
 188         This should create two relocs, both pointing to <<_foo>>, and with
 189         0x12340000 in their addend field. The data would consist of:
 190
 191 |RELOCATION RECORDS FOR [.text]:
 192 |offset   type      value
 193 |00000002 HVRT16    _foo+0x12340000
 194 |00000006 LVRT16    _foo+0x12340000
 195 |
 196 |00000000 5da05678           ; or.u r13,r0,0x5678
 197 |00000004 1c4d5678           ; ld.b r2,r13,0x5678
 198 |00000008 f400c001           ; jmp r1
 199
 200         The relocation routine digs out the value from the data, adds
 201         it to the addend to get the original offset, and then adds the
 202         value of <<_foo>>. Note that all 32 bits have to be kept around
 203         somewhere, to cope with carry from bit 15 to bit 16.
 204
 205         One further example is the sparc and the a.out format. The
 206         sparc has a similar problem to the 88k, in that some
 207         instructions don't have room for an entire offset, but on the
 208         sparc the parts are created in odd sized lumps. The designers of
 209         the a.out format chose to not use the data within the section
 210         for storing part of the offset; all the offset is kept within
 211         the reloc. Anything in the data should be ignored.
 212
 213 |        save %sp,-112,%sp
 214 |        sethi %hi(_foo+0x12345678),%g2
 215 |        ldsb [%g2+%lo(_foo+0x12345678)],%i0
 216 |        ret
 217 |        restore
 218
 219         Both relocs contain a pointer to <<foo>>, and the offsets
 220         contain junk.
 221
 222 |RELOCATION RECORDS FOR [.text]:
 223 |offset   type      value
 224 |00000004 HI22      _foo+0x12345678
 225 |00000008 LO10      _foo+0x12345678
 226 |
 227 |00000000 9de3bf90     ; save %sp,-112,%sp
 228 |00000004 05000000     ; sethi %hi(_foo+0),%g2
 229 |00000008 f048a000     ; ldsb [%g2+%lo(_foo+0)],%i0
 230 |0000000c 81c7e008     ; ret
 231 |00000010 81e80000     ; restore
 232
 233         o <<howto>>
 234
 235         The <<howto>> field can be imagined as a
 236         relocation instruction. It is a pointer to a structure which
 237         contains information on what to do with all of the other
 238         information in the reloc record and data section. A back end
 239         would normally have a relocation instruction set and turn
 240         relocations into pointers to the correct structure on input -
 241         but it would be possible to create each howto field on demand.
 242
 243 */
 244
 245 /*
 246 SUBSUBSECTION
 247         <<enum complain_overflow>>
 248
 249         Indicates what sort of overflow checking should be done when
 250         performing a relocation.
 251
 252 CODE_FRAGMENT
 253 .
 254 .enum complain_overflow
 255 .{
 256 .  {* Do not complain on overflow.  *}
 257 .  complain_overflow_dont,
 258 .
 259 .  {* Complain if the value overflows when considered as a signed
 260 .     number one bit larger than the field.  ie. A bitfield of N bits
 261 .     is allowed to represent -2**n to 2**n-1.  *}
 262 .  complain_overflow_bitfield,
 263 .
 264 .  {* Complain if the value overflows when considered as a signed
 265 .     number.  *}
 266 .  complain_overflow_signed,
 267 .
 268 .  {* Complain if the value overflows when considered as an
 269 .     unsigned number.  *}
 270 .  complain_overflow_unsigned
 271 .};
 272
 273 */
 274
 275 /*
 276 SUBSUBSECTION
 277         <<reloc_howto_type>>
 278
 279         The <<reloc_howto_type>> is a structure which contains all the
 280         information that libbfd needs to know to tie up a back end's data.
 281
 282 CODE_FRAGMENT
 283 .struct bfd_symbol;             {* Forward declaration.  *}
 284 .
 285 .struct reloc_howto_struct
 286 .{
 287 .  {*  The type field has mainly a documentary use - the back end can
 288 .      do what it wants with it, though normally the back end's
 289 .      external idea of what a reloc number is stored
 290 .      in this field.  For example, a PC relative word relocation
 291 .      in a coff environment has the type 023 - because that's
 292 .      what the outside world calls a R_PCRWORD reloc.  *}
 293 .  unsigned int type;
 294 .
 295 .  {*  The value the final relocation is shifted right by.  This drops
 296 .      unwanted data from the relocation.  *}
 297 .  unsigned int rightshift;
 298 .
 299 .  {*  The size of the item to be relocated.  This is *not* a
 300 .      power-of-two measure.  To get the number of bytes operated
 301 .      on by a type of relocation, use bfd_get_reloc_size.  *}
 302 .  int size;
 303 .
 304 .  {*  The number of bits in the item to be relocated.  This is used
 305 .      when doing overflow checking.  *}
 306 .  unsigned int bitsize;
 307 .
 308 .  {*  Notes that the relocation is relative to the location in the
 309 .      data section of the addend.  The relocation function will
 310 .      subtract from the relocation value the address of the location
 311 .      being relocated.  *}
 312 .  bfd_boolean pc_relative;
 313 .
 314 .  {*  The bit position of the reloc value in the destination.
 315 .      The relocated value is left shifted by this amount.  *}
 316 .  unsigned int bitpos;
 317 .
 318 .  {* What type of overflow error should be checked for when
 319 .     relocating.  *}
 320 .  enum complain_overflow complain_on_overflow;
 321 .
 322 .  {* If this field is non null, then the supplied function is
 323 .     called rather than the normal function.  This allows really
 324 .     strange relocation methods to be accommodated (e.g., i960 callj
 325 .     instructions).  *}
 326 .  bfd_reloc_status_type (*special_function)
 327 .    (bfd *, arelent *, struct bfd_symbol *, void *, asection *,
 328 .     bfd *, char **);
 329 .
 330 .  {* The textual name of the relocation type.  *}
 331 .  char *name;
 332 .
 333 .  {* Some formats record a relocation addend in the section contents
 334 .     rather than with the relocation.  For ELF formats this is the
 335 .     distinction between USE_REL and USE_RELA (though the code checks
 336 .     for USE_REL == 1/0).  The value of this field is TRUE if the
 337 .     addend is recorded with the section contents; when performing a
 338 .     partial link (ld -r) the section contents (the data) will be
 339 .     modified.  The value of this field is FALSE if addends are
 340 .     recorded with the relocation (in arelent.addend); when performing
 341 .     a partial link the relocation will be modified.
 342 .     All relocations for all ELF USE_RELA targets should set this field
 343 .     to FALSE (values of TRUE should be looked on with suspicion).
 344 .     However, the converse is not true: not all relocations of all ELF
 345 .     USE_REL targets set this field to TRUE.  Why this is so is peculiar
 346 .     to each particular target.  For relocs that aren't used in partial
 347 .     links (e.g. GOT stuff) it doesn't matter what this is set to.  *}
 348 .  bfd_boolean partial_inplace;
 349 .
 350 .  {* src_mask selects the part of the instruction (or data) to be used
 351 .     in the relocation sum.  If the target relocations don't have an
 352 .     addend in the reloc, eg. ELF USE_REL, src_mask will normally equal
 353 .     dst_mask to extract the addend from the section contents.  If
 354 .     relocations do have an addend in the reloc, eg. ELF USE_RELA, this
 355 .     field should be zero.  Non-zero values for ELF USE_RELA targets are
 356 .     bogus as in those cases the value in the dst_mask part of the
 357 .     section contents should be treated as garbage.  *}
 358 .  bfd_vma src_mask;
 359 .
 360 .  {* dst_mask selects which parts of the instruction (or data) are
 361 .     replaced with a relocated value.  *}
 362 .  bfd_vma dst_mask;
 363 .
 364 .  {* When some formats create PC relative instructions, they leave
 365 .     the value of the pc of the place being relocated in the offset
 366 .     slot of the instruction, so that a PC relative relocation can
 367 .     be made just by adding in an ordinary offset (e.g., sun3 a.out).
 368 .     Some formats leave the displacement part of an instruction
 369 .     empty (e.g., m88k bcs); this flag signals the fact.  *}
 370 .  bfd_boolean pcrel_offset;
 371 .};
 372 .
 373 */
 374
 375 /*
 376 FUNCTION
 377         The HOWTO Macro
 378
 379 DESCRIPTION
 380         The HOWTO define is horrible and will go away.
 381
 382 .#define HOWTO(C, R, S, B, P, BI, O, SF, NAME, INPLACE, MASKSRC, MASKDST, PC) \
 383 .  { (unsigned) C, R, S, B, P, BI, O, SF, NAME, INPLACE, MASKSRC, MASKDST, PC }
 384
 385 DESCRIPTION
 386         And will be replaced with the totally magic way. But for the
 387         moment, we are compatible, so do it this way.
 388
 389 .#define NEWHOWTO(FUNCTION, NAME, SIZE, REL, IN) \
 390 .  HOWTO (0, 0, SIZE, 0, REL, 0, complain_overflow_dont, FUNCTION, \
 391 .         NAME, FALSE, 0, 0, IN)
 392 .
 393
 394 DESCRIPTION
 395         This is used to fill in an empty howto entry in an array.
 396
 397 .#define EMPTY_HOWTO(C) \
 398 .  HOWTO ((C), 0, 0, 0, FALSE, 0, complain_overflow_dont, NULL, \
 399 .         NULL, FALSE, 0, 0, FALSE)
 400 .
 401
 402 DESCRIPTION
 403         Helper routine to turn a symbol into a relocation value.
 404
 405 .#define HOWTO_PREPARE(relocation, symbol)               \
 406 .  {                                                     \
 407 .    if (symbol != NULL)                                 \
 408 .      {                                                 \
 409 .        if (bfd_is_com_section (symbol->section))       \
 410 .          {                                             \
 411 .            relocation = 0;                             \
 412 .          }                                             \
 413 .        else                                            \
 414 .          {                                             \
 415 .            relocation = symbol->value;                 \
 416 .          }                                             \
 417 .      }                                                 \
 418 .  }
 419 .
 420 */
 421
 422 /*
 423 FUNCTION
 424         bfd_get_reloc_size
 425
 426 SYNOPSIS
 427         unsigned int bfd_get_reloc_size (reloc_howto_type *);
 428
 429 DESCRIPTION
 430         For a reloc_howto_type that operates on a fixed number of bytes,
 431         this returns the number of bytes operated on.
 432  */
 433
 434 unsigned int
 435 bfd_get_reloc_size (reloc_howto_type *howto)
 436 {
 437   switch (howto->size)
 438     {
 439     case 0: return 1;
 440     case 1: return 2;
 441     case 2: return 4;
 442     case 3: return 0;
 443     case 4: return 8;
 444     case 8: return 16;
 445     case -2: return 4;
 446     default: abort ();
 447     }
 448 }
 449
 450 /*
 451 TYPEDEF
 452         arelent_chain
 453
 454 DESCRIPTION
 455
 456         How relocs are tied together in an <<asection>>:
 457
 458 .typedef struct relent_chain
 459 .{
 460 .  arelent relent;
 461 .  struct relent_chain *next;
 462 .}
 463 .arelent_chain;
 464 .
 465 */
 466
 467 /* N_ONES produces N one bits, without overflowing machine arithmetic.  */
 468 #define N_ONES(n) (((((bfd_vma) 1 << ((n) - 1)) - 1) << 1) | 1)
 469
 470 /*
 471 FUNCTION
 472         bfd_check_overflow
 473
 474 SYNOPSIS
 475         bfd_reloc_status_type bfd_check_overflow
 476           (enum complain_overflow how,
 477            unsigned int bitsize,
 478            unsigned int rightshift,
 479            unsigned int addrsize,
 480            bfd_vma relocation);
 481
 482 DESCRIPTION
 483         Perform overflow checking on @var{relocation} which has
 484         @var{bitsize} significant bits and will be shifted right by
 485         @var{rightshift} bits, on a machine with addresses containing
 486         @var{addrsize} significant bits.  The result is either of
 487         @code{bfd_reloc_ok} or @code{bfd_reloc_overflow}.
 488
 489 */
 490
 491 bfd_reloc_status_type
 492 bfd_check_overflow (enum complain_overflow how,
 493                     unsigned int bitsize,
 494                     unsigned int rightshift,
 495                     unsigned int addrsize,
 496                     bfd_vma relocation)
 497 {
 498   bfd_vma fieldmask, addrmask, signmask, ss, a;
 499   bfd_reloc_status_type flag = bfd_reloc_ok;
 500
 501   /* Note: BITSIZE should always be <= ADDRSIZE, but in case it's not,
 502      we'll be permissive: extra bits in the field mask will
 503      automatically extend the address mask for purposes of the
 504      overflow check.  */
 505   fieldmask = N_ONES (bitsize);
 506   signmask = ~fieldmask;
 507   addrmask = N_ONES (addrsize) | fieldmask;
 508   a = (relocation & addrmask) >> rightshift;;
 509
 510   switch (how)
 511     {
 512     case complain_overflow_dont:
 513       break;
 514
 515     case complain_overflow_signed:
 516       /* If any sign bits are set, all sign bits must be set.  That
 517          is, A must be a valid negative address after shifting.  */
 518       signmask = ~ (fieldmask >> 1);
 519       /* Fall thru */
 520
 521     case complain_overflow_bitfield:
 522       /* Bitfields are sometimes signed, sometimes unsigned.  We
 523          explicitly allow an address wrap too, which means a bitfield
 524          of n bits is allowed to store -2**n to 2**n-1.  Thus overflow
 525          if the value has some, but not all, bits set outside the
 526          field.  */
 527       ss = a & signmask;
 528       if (ss != 0 && ss != ((addrmask >> rightshift) & signmask))
 529         flag = bfd_reloc_overflow;
 530       break;
 531
 532     case complain_overflow_unsigned:
 533       /* We have an overflow if the address does not fit in the field.  */
 534       if ((a & signmask) != 0)
 535         flag = bfd_reloc_overflow;
 536       break;
 537
 538     default:
 539       abort ();
 540     }
 541
 542   return flag;
 543 }
 544
 545 /*
 546 FUNCTION
 547         bfd_perform_relocation
 548
 549 SYNOPSIS
 550         bfd_reloc_status_type bfd_perform_relocation
 551           (bfd *abfd,
 552            arelent *reloc_entry,
 553            void *data,
 554            asection *input_section,
 555            bfd *output_bfd,
 556            char **error_message);
 557
 558 DESCRIPTION
 559         If @var{output_bfd} is supplied to this function, the
 560         generated image will be relocatable; the relocations are
 561         copied to the output file after they have been changed to
 562         reflect the new state of the world. There are two ways of
 563         reflecting the results of partial linkage in an output file:
 564         by modifying the output data in place, and by modifying the
 565         relocation record.  Some native formats (e.g., basic a.out and
 566         basic coff) have no way of specifying an addend in the
 567         relocation type, so the addend has to go in the output data.
 568         This is no big deal since in these formats the output data
 569         slot will always be big enough for the addend. Complex reloc
 570         types with addends were invented to solve just this problem.
 571         The @var{error_message} argument is set to an error message if
 572         this return @code{bfd_reloc_dangerous}.
 573
 574 */
 575
 576 bfd_reloc_status_type
 577 bfd_perform_relocation (bfd *abfd,
 578                         arelent *reloc_entry,
 579                         void *data,
 580                         asection *input_section,
 581                         bfd *output_bfd,
 582                         char **error_message)
 583 {
 584   bfd_vma relocation;
 585   bfd_reloc_status_type flag = bfd_reloc_ok;
 586   bfd_size_type octets = reloc_entry->address * bfd_octets_per_byte (abfd);
 587   bfd_vma output_base = 0;
 588   reloc_howto_type *howto = reloc_entry->howto;
 589   asection *reloc_target_output_section;
 590   asymbol *symbol;
 591
 592   symbol = *(reloc_entry->sym_ptr_ptr);
 593   if (bfd_is_abs_section (symbol->section)
 594       && output_bfd != NULL)
 595     {
 596       reloc_entry->address += input_section->output_offset;
 597       return bfd_reloc_ok;
 598     }
 599
 600   /* If we are not producing relocatable output, return an error if
 601      the symbol is not defined.  An undefined weak symbol is
 602      considered to have a value of zero (SVR4 ABI, p. 4-27).  */
 603   if (bfd_is_und_section (symbol->section)
 604       && (symbol->flags & BSF_WEAK) == 0
 605       && output_bfd == NULL)
 606     flag = bfd_reloc_undefined;
 607
 608   /* If there is a function supplied to handle this relocation type,
 609      call it.  It'll return `bfd_reloc_continue' if further processing
 610      can be done.  */
 611   if (howto->special_function)
 612     {
 613       bfd_reloc_status_type cont;
 614       cont = howto->special_function (abfd, reloc_entry, symbol, data,
 615                                       input_section, output_bfd,
 616                                       error_message);
 617       if (cont != bfd_reloc_continue)
 618         return cont;
 619     }
 620
 621   /* Is the address of the relocation really within the section?  */
 622   if (reloc_entry->address > bfd_get_section_limit (abfd, input_section))
 623     return bfd_reloc_outofrange;
 624
 625   /* Work out which section the relocation is targeted at and the
 626      initial relocation command value.  */
 627
 628   /* Get symbol value.  (Common symbols are special.)  */
 629   if (bfd_is_com_section (symbol->section))
 630     relocation = 0;
 631   else
 632     relocation = symbol->value;
 633
 634   reloc_target_output_section = symbol->section->output_section;
 635
 636   /* Convert input-section-relative symbol value to absolute.  */
 637   if ((output_bfd && ! howto->partial_inplace)
 638       || reloc_target_output_section == NULL)
 639     output_base = 0;
 640   else
 641     output_base = reloc_target_output_section->vma;
 642
 643   relocation += output_base + symbol->section->output_offset;
 644
 645   /* Add in supplied addend.  */
 646   relocation += reloc_entry->addend;
 647
 648   /* Here the variable relocation holds the final address of the
 649      symbol we are relocating against, plus any addend.  */
 650
 651   if (howto->pc_relative)
 652     {
 653       /* This is a PC relative relocation.  We want to set RELOCATION
 654          to the distance between the address of the symbol and the
 655          location.  RELOCATION is already the address of the symbol.
 656
 657          We start by subtracting the address of the section containing
 658          the location.
 659
 660          If pcrel_offset is set, we must further subtract the position
 661          of the location within the section.  Some targets arrange for
 662          the addend to be the negative of the position of the location
 663          within the section; for example, i386-aout does this.  For
 664          i386-aout, pcrel_offset is FALSE.  Some other targets do not
 665          include the position of the location; for example, m88kbcs,
 666          or ELF.  For those targets, pcrel_offset is TRUE.
 667
 668          If we are producing relocatable output, then we must ensure
 669          that this reloc will be correctly computed when the final
 670          relocation is done.  If pcrel_offset is FALSE we want to wind
 671          up with the negative of the location within the section,
 672          which means we must adjust the existing addend by the change
 673          in the location within the section.  If pcrel_offset is TRUE
 674          we do not want to adjust the existing addend at all.
 675
 676          FIXME: This seems logical to me, but for the case of
 677          producing relocatable output it is not what the code
 678          actually does.  I don't want to change it, because it seems
 679          far too likely that something will break.  */
 680
 681       relocation -=
 682         input_section->output_section->vma + input_section->output_offset;
 683
 684       if (howto->pcrel_offset)
 685         relocation -= reloc_entry->address;
 686     }
 687
 688   if (output_bfd != NULL)
 689     {
 690       if (! howto->partial_inplace)
 691         {
 692           /* This is a partial relocation, and we want to apply the relocation
 693              to the reloc entry rather than the raw data. Modify the reloc
 694              inplace to reflect what we now know.  */
 695           reloc_entry->addend = relocation;
 696           reloc_entry->address += input_section->output_offset;
 697           return flag;
 698         }
 699       else
 700         {
 701           /* This is a partial relocation, but inplace, so modify the
 702              reloc record a bit.
 703
 704              If we've relocated with a symbol with a section, change
 705              into a ref to the section belonging to the symbol.  */
 706
 707           reloc_entry->address += input_section->output_offset;
 708
 709           /* WTF?? */
 710           if (abfd->xvec->flavour == bfd_target_coff_flavour
 711               && strcmp (abfd->xvec->name, "coff-Intel-little") != 0
 712               && strcmp (abfd->xvec->name, "coff-Intel-big") != 0)
 713             {
 714               /* For m68k-coff, the addend was being subtracted twice during
 715                  relocation with -r.  Removing the line below this comment
 716                  fixes that problem; see PR 2953.
 717
 718 However, Ian wrote the following, regarding removing the line below,
 719 which explains why it is still enabled:  --djm
 720
 721 If you put a patch like that into BFD you need to check all the COFF
 722 linkers.  I am fairly certain that patch will break coff-i386 (e.g.,
 723 SCO); see coff_i386_reloc in coff-i386.c where I worked around the
 724 problem in a different way.  There may very well be a reason that the
 725 code works as it does.
 726
 727 Hmmm.  The first obvious point is that bfd_perform_relocation should
 728 not have any tests that depend upon the flavour.  It's seem like
 729 entirely the wrong place for such a thing.  The second obvious point
 730 is that the current code ignores the reloc addend when producing
 731 relocatable output for COFF.  That's peculiar.  In fact, I really
 732 have no idea what the point of the line you want to remove is.
 733
 734 A typical COFF reloc subtracts the old value of the symbol and adds in
 735 the new value to the location in the object file (if it's a pc
 736 relative reloc it adds the difference between the symbol value and the
 737 location).  When relocating we need to preserve that property.
 738
 739 BFD handles this by setting the addend to the negative of the old
 740 value of the symbol.  Unfortunately it handles common symbols in a
 741 non-standard way (it doesn't subtract the old value) but that's a
 742 different story (we can't change it without losing backward
 743 compatibility with old object files) (coff-i386 does subtract the old
 744 value, to be compatible with existing coff-i386 targets, like SCO).
 745
 746 So everything works fine when not producing relocatable output.  When
 747 we are producing relocatable output, logically we should do exactly
 748 what we do when not producing relocatable output.  Therefore, your
 749 patch is correct.  In fact, it should probably always just set
 750 reloc_entry->addend to 0 for all cases, since it is, in fact, going to
 751 add the value into the object file.  This won't hurt the COFF code,
 752 which doesn't use the addend; I'm not sure what it will do to other
 753 formats (the thing to check for would be whether any formats both use
 754 the addend and set partial_inplace).
 755
 756 When I wanted to make coff-i386 produce relocatable output, I ran
 757 into the problem that you are running into: I wanted to remove that
 758 line.  Rather than risk it, I made the coff-i386 relocs use a special
 759 function; it's coff_i386_reloc in coff-i386.c.  The function
 760 specifically adds the addend field into the object file, knowing that
 761 bfd_perform_relocation is not going to.  If you remove that line, then
 762 coff-i386.c will wind up adding the addend field in twice.  It's
 763 trivial to fix; it just needs to be done.
 764
 765 The problem with removing the line is just that it may break some
 766 working code.  With BFD it's hard to be sure of anything.  The right
 767 way to deal with this is simply to build and test at least all the
 768 supported COFF targets.  It should be straightforward if time and disk
 769 space consuming.  For each target:
 770     1) build the linker
 771     2) generate some executable, and link it using -r (I would
 772        probably use paranoia.o and link against newlib/libc.a, which
 773        for all the supported targets would be available in
 774        /usr/cygnus/progressive/H-host/target/lib/libc.a).
 775     3) make the change to reloc.c
 776     4) rebuild the linker
 777     5) repeat step 2
 778     6) if the resulting object files are the same, you have at least
 779        made it no worse
 780     7) if they are different you have to figure out which version is
 781        right
 782 */
 783               relocation -= reloc_entry->addend;
 784               reloc_entry->addend = 0;
 785             }
 786           else
 787             {
 788               reloc_entry->addend = relocation;
 789             }
 790         }
 791     }
 792   else
 793     {
 794       reloc_entry->addend = 0;
 795     }
 796
 797   /* FIXME: This overflow checking is incomplete, because the value
 798      might have overflowed before we get here.  For a correct check we
 799      need to compute the value in a size larger than bitsize, but we
 800      can't reasonably do that for a reloc the same size as a host
 801      machine word.
 802      FIXME: We should also do overflow checking on the result after
 803      adding in the value contained in the object file.  */
 804   if (howto->complain_on_overflow != complain_overflow_dont
 805       && flag == bfd_reloc_ok)
 806     flag = bfd_check_overflow (howto->complain_on_overflow,
 807                                howto->bitsize,
 808                                howto->rightshift,
 809                                bfd_arch_bits_per_address (abfd),
 810                                relocation);
 811
 812   /* Either we are relocating all the way, or we don't want to apply
 813      the relocation to the reloc entry (probably because there isn't
 814      any room in the output format to describe addends to relocs).  */
 815
 816   /* The cast to bfd_vma avoids a bug in the Alpha OSF/1 C compiler
 817      (OSF version 1.3, compiler version 3.11).  It miscompiles the
 818      following program:
 819
 820      struct str
 821      {
 822        unsigned int i0;
 823      } s = { 0 };
 824
 825      int
 826      main ()
 827      {
 828        unsigned long x;
 829
 830        x = 0x100000000;
 831        x <<= (unsigned long) s.i0;
 832        if (x == 0)
 833          printf ("failed\n");
 834        else
 835          printf ("succeeded (%lx)\n", x);
 836      }
 837      */
 838
 839   relocation >>= (bfd_vma) howto->rightshift;
 840
 841   /* Shift everything up to where it's going to be used.  */
 842   relocation <<= (bfd_vma) howto->bitpos;
 843
 844   /* Wait for the day when all have the mask in them.  */
 845
 846   /* What we do:
 847      i instruction to be left alone
 848      o offset within instruction
 849      r relocation offset to apply
 850      S src mask
 851      D dst mask
 852      N ~dst mask
 853      A part 1
 854      B part 2
 855      R result
 856
 857      Do this:
 858      ((  i i i i i o o o o o  from bfd_get<size>
 859      and           S S S S S) to get the size offset we want
 860      +   r r r r r r r r r r) to get the final value to place
 861      and           D D D D D  to chop to right size
 862      -----------------------
 863      =             A A A A A
 864      And this:
 865      (   i i i i i o o o o o  from bfd_get<size>
 866      and N N N N N          ) get instruction
 867      -----------------------
 868      =   B B B B B
 869
 870      And then:
 871      (   B B B B B
 872      or            A A A A A)
 873      -----------------------
 874      =   R R R R R R R R R R  put into bfd_put<size>
 875      */
 876
 877 #define DOIT(x) \
 878   x = ( (x & ~howto->dst_mask) | (((x & howto->src_mask) +  relocation) & howto->dst_mask))
 879
 880   switch (howto->size)
 881     {
 882     case 0:
 883       {
 884         char x = bfd_get_8 (abfd, (char *) data + octets);
 885         DOIT (x);
 886         bfd_put_8 (abfd, x, (unsigned char *) data + octets);
 887       }
 888       break;
 889
 890     case 1:
 891       {
 892         short x = bfd_get_16 (abfd, (bfd_byte *) data + octets);
 893         DOIT (x);
 894         bfd_put_16 (abfd, (bfd_vma) x, (unsigned char *) data + octets);
 895       }
 896       break;
 897     case 2:
 898       {
 899         long x = bfd_get_32 (abfd, (bfd_byte *) data + octets);
 900         DOIT (x);
 901         bfd_put_32 (abfd, (bfd_vma) x, (bfd_byte *) data + octets);
 902       }
 903       break;
 904     case -2:
 905       {
 906         long x = bfd_get_32 (abfd, (bfd_byte *) data + octets);
 907         relocation = -relocation;
 908         DOIT (x);
 909         bfd_put_32 (abfd, (bfd_vma) x, (bfd_byte *) data + octets);
 910       }
 911       break;
 912
 913     case -1:
 914       {
 915         long x = bfd_get_16 (abfd, (bfd_byte *) data + octets);
 916         relocation = -relocation;
 917         DOIT (x);
 918         bfd_put_16 (abfd, (bfd_vma) x, (bfd_byte *) data + octets);
 919       }
 920       break;
 921
 922     case 3:
 923       /* Do nothing */
 924       break;
 925
 926     case 4:
 927 #ifdef BFD64
 928       {
 929         bfd_vma x = bfd_get_64 (abfd, (bfd_byte *) data + octets);
 930         DOIT (x);
 931         bfd_put_64 (abfd, x, (bfd_byte *) data + octets);
 932       }
 933 #else
 934       abort ();
 935 #endif
 936       break;
 937     default:
 938       return bfd_reloc_other;
 939     }
 940
 941   return flag;
 942 }
 943
 944 /*
 945 FUNCTION
 946         bfd_install_relocation
 947
 948 SYNOPSIS
 949         bfd_reloc_status_type bfd_install_relocation
 950           (bfd *abfd,
 951            arelent *reloc_entry,
 952            void *data, bfd_vma data_start,
 953            asection *input_section,
 954            char **error_message);
 955
 956 DESCRIPTION
 957         This looks remarkably like <<bfd_perform_relocation>>, except it
 958         does not expect that the section contents have been filled in.
 959         I.e., it's suitable for use when creating, rather than applying
 960         a relocation.
 961
 962         For now, this function should be considered reserved for the
 963         assembler.
 964 */
 965
 966 bfd_reloc_status_type
 967 bfd_install_relocation (bfd *abfd,
 968                         arelent *reloc_entry,
 969                         void *data_start,
 970                         bfd_vma data_start_offset,
 971                         asection *input_section,
 972                         char **error_message)
 973 {
 974   bfd_vma relocation;
 975   bfd_reloc_status_type flag = bfd_reloc_ok;
 976   bfd_size_type octets = reloc_entry->address * bfd_octets_per_byte (abfd);
 977   bfd_vma output_base = 0;
 978   reloc_howto_type *howto = reloc_entry->howto;
 979   asection *reloc_target_output_section;
 980   asymbol *symbol;
 981   bfd_byte *data;
 982
 983   symbol = *(reloc_entry->sym_ptr_ptr);
 984   if (bfd_is_abs_section (symbol->section))
 985     {
 986       reloc_entry->address += input_section->output_offset;
 987       return bfd_reloc_ok;
 988     }
 989
 990   /* If there is a function supplied to handle this relocation type,
 991      call it.  It'll return `bfd_reloc_continue' if further processing
 992      can be done.  */
 993   if (howto->special_function)
 994     {
 995       bfd_reloc_status_type cont;
 996
 997       /* XXX - The special_function calls haven't been fixed up to deal
 998          with creating new relocations and section contents.  */
 999       cont = howto->special_function (abfd, reloc_entry, symbol,
1000                                       /* XXX - Non-portable! */
1001                                       ((bfd_byte *) data_start
1002                                        - data_start_offset),
1003                                       input_section, abfd, error_message);
1004       if (cont != bfd_reloc_continue)
1005         return cont;
1006     }
1007
1008   /* Is the address of the relocation really within the section?  */
1009   if (reloc_entry->address > bfd_get_section_limit (abfd, input_section))
1010     return bfd_reloc_outofrange;
1011
1012   /* Work out which section the relocation is targeted at and the
1013      initial relocation command value.  */
1014
1015   /* Get symbol value.  (Common symbols are special.)  */
1016   if (bfd_is_com_section (symbol->section))
1017     relocation = 0;
1018   else
1019     relocation = symbol->value;
1020
1021   reloc_target_output_section = symbol->section->output_section;
1022
1023   /* Convert input-section-relative symbol value to absolute.  */
1024   if (! howto->partial_inplace)
1025     output_base = 0;
1026   else
1027     output_base = reloc_target_output_section->vma;
1028
1029   relocation += output_base + symbol->section->output_offset;
1030
1031   /* Add in supplied addend.  */
1032   relocation += reloc_entry->addend;
1033
1034   /* Here the variable relocation holds the final address of the
1035      symbol we are relocating against, plus any addend.  */
1036
1037   if (howto->pc_relative)
1038     {
1039       /* This is a PC relative relocation.  We want to set RELOCATION
1040          to the distance between the address of the symbol and the
1041          location.  RELOCATION is already the address of the symbol.
1042
1043          We start by subtracting the address of the section containing
1044          the location.
1045
1046          If pcrel_offset is set, we must further subtract the position
1047          of the location within the section.  Some targets arrange for
1048          the addend to be the negative of the position of the location
1049          within the section; for example, i386-aout does this.  For
1050          i386-aout, pcrel_offset is FALSE.  Some other targets do not
1051          include the position of the location; for example, m88kbcs,
1052          or ELF.  For those targets, pcrel_offset is TRUE.
1053
1054          If we are producing relocatable output, then we must ensure
1055          that this reloc will be correctly computed when the final
1056          relocation is done.  If pcrel_offset is FALSE we want to wind
1057          up with the negative of the location within the section,
1058          which means we must adjust the existing addend by the change
1059          in the location within the section.  If pcrel_offset is TRUE
1060          we do not want to adjust the existing addend at all.
1061
1062          FIXME: This seems logical to me, but for the case of
1063          producing relocatable output it is not what the code
1064          actually does.  I don't want to change it, because it seems
1065          far too likely that something will break.  */
1066
1067       relocation -=
1068         input_section->output_section->vma + input_section->output_offset;
1069
1070       if (howto->pcrel_offset && howto->partial_inplace)
1071         relocation -= reloc_entry->address;
1072     }
1073
1074   if (! howto->partial_inplace)
1075     {
1076       /* This is a partial relocation, and we want to apply the relocation
1077          to the reloc entry rather than the raw data. Modify the reloc
1078          inplace to reflect what we now know.  */
1079       reloc_entry->addend = relocation;
1080       reloc_entry->address += input_section->output_offset;
1081       return flag;
1082     }
1083   else
1084     {
1085       /* This is a partial relocation, but inplace, so modify the
1086          reloc record a bit.
1087
1088          If we've relocated with a symbol with a section, change
1089          into a ref to the section belonging to the symbol.  */
1090       reloc_entry->address += input_section->output_offset;
1091
1092       /* WTF?? */
1093       if (abfd->xvec->flavour == bfd_target_coff_flavour
1094           && strcmp (abfd->xvec->name, "coff-Intel-little") != 0
1095           && strcmp (abfd->xvec->name, "coff-Intel-big") != 0)
1096         {
1097
1098           /* For m68k-coff, the addend was being subtracted twice during
1099              relocation with -r.  Removing the line below this comment
1100              fixes that problem; see PR 2953.
1101
1102 However, Ian wrote the following, regarding removing the line below,
1103 which explains why it is still enabled:  --djm
1104
1105 If you put a patch like that into BFD you need to check all the COFF
1106 linkers.  I am fairly certain that patch will break coff-i386 (e.g.,
1107 SCO); see coff_i386_reloc in coff-i386.c where I worked around the
1108 problem in a different way.  There may very well be a reason that the
1109 code works as it does.
1110
1111 Hmmm.  The first obvious point is that bfd_install_relocation should
1112 not have any tests that depend upon the flavour.  It's seem like
1113 entirely the wrong place for such a thing.  The second obvious point
1114 is that the current code ignores the reloc addend when producing
1115 relocatable output for COFF.  That's peculiar.  In fact, I really
1116 have no idea what the point of the line you want to remove is.
1117
1118 A typical COFF reloc subtracts the old value of the symbol and adds in
1119 the new value to the location in the object file (if it's a pc
1120 relative reloc it adds the difference between the symbol value and the
1121 location).  When relocating we need to preserve that property.
1122
1123 BFD handles this by setting the addend to the negative of the old
1124 value of the symbol.  Unfortunately it handles common symbols in a
1125 non-standard way (it doesn't subtract the old value) but that's a
1126 different story (we can't change it without losing backward
1127 compatibility with old object files) (coff-i386 does subtract the old
1128 value, to be compatible with existing coff-i386 targets, like SCO).
1129
1130 So everything works fine when not producing relocatable output.  When
1131 we are producing relocatable output, logically we should do exactly
1132 what we do when not producing relocatable output.  Therefore, your
1133 patch is correct.  In fact, it should probably always just set
1134 reloc_entry->addend to 0 for all cases, since it is, in fact, going to
1135 add the value into the object file.  This won't hurt the COFF code,
1136 which doesn't use the addend; I'm not sure what it will do to other
1137 formats (the thing to check for would be whether any formats both use
1138 the addend and set partial_inplace).
1139
1140 When I wanted to make coff-i386 produce relocatable output, I ran
1141 into the problem that you are running into: I wanted to remove that
1142 line.  Rather than risk it, I made the coff-i386 relocs use a special
1143 function; it's coff_i386_reloc in coff-i386.c.  The function
1144 specifically adds the addend field into the object file, knowing that
1145 bfd_install_relocation is not going to.  If you remove that line, then
1146 coff-i386.c will wind up adding the addend field in twice.  It's
1147 trivial to fix; it just needs to be done.
1148
1149 The problem with removing the line is just that it may break some
1150 working code.  With BFD it's hard to be sure of anything.  The right
1151 way to deal with this is simply to build and test at least all the
1152 supported COFF targets.  It should be straightforward if time and disk
1153 space consuming.  For each target:
1154     1) build the linker
1155     2) generate some executable, and link it using -r (I would
1156        probably use paranoia.o and link against newlib/libc.a, which
1157        for all the supported targets would be available in
1158        /usr/cygnus/progressive/H-host/target/lib/libc.a).
1159     3) make the change to reloc.c
1160     4) rebuild the linker
1161     5) repeat step 2
1162     6) if the resulting object files are the same, you have at least
1163        made it no worse
1164     7) if they are different you have to figure out which version is
1165        right.  */
1166           relocation -= reloc_entry->addend;
1167           /* FIXME: There should be no target specific code here...  */
1168           if (strcmp (abfd->xvec->name, "coff-z8k") != 0)
1169             reloc_entry->addend = 0;
1170         }
1171       else
1172         {
1173           reloc_entry->addend = relocation;
1174         }
1175     }
1176
1177   /* FIXME: This overflow checking is incomplete, because the value
1178      might have overflowed before we get here.  For a correct check we
1179      need to compute the value in a size larger than bitsize, but we
1180      can't reasonably do that for a reloc the same size as a host
1181      machine word.
1182      FIXME: We should also do overflow checking on the result after
1183      adding in the value contained in the object file.  */
1184   if (howto->complain_on_overflow != complain_overflow_dont)
1185     flag = bfd_check_overflow (howto->complain_on_overflow,
1186                                howto->bitsize,
1187                                howto->rightshift,
1188                                bfd_arch_bits_per_address (abfd),
1189                                relocation);
1190
1191   /* Either we are relocating all the way, or we don't want to apply
1192      the relocation to the reloc entry (probably because there isn't
1193      any room in the output format to describe addends to relocs).  */
1194
1195   /* The cast to bfd_vma avoids a bug in the Alpha OSF/1 C compiler
1196      (OSF version 1.3, compiler version 3.11).  It miscompiles the
1197      following program:
1198
1199      struct str
1200      {
1201        unsigned int i0;
1202      } s = { 0 };
1203
1204      int
1205      main ()
1206      {
1207        unsigned long x;
1208
1209        x = 0x100000000;
1210        x <<= (unsigned long) s.i0;
1211        if (x == 0)
1212          printf ("failed\n");
1213        else
1214          printf ("succeeded (%lx)\n", x);
1215      }
1216      */
1217
1218   relocation >>= (bfd_vma) howto->rightshift;
1219
1220   /* Shift everything up to where it's going to be used.  */
1221   relocation <<= (bfd_vma) howto->bitpos;
1222
1223   /* Wait for the day when all have the mask in them.  */
1224
1225   /* What we do:
1226      i instruction to be left alone
1227      o offset within instruction
1228      r relocation offset to apply
1229      S src mask
1230      D dst mask
1231      N ~dst mask
1232      A part 1
1233      B part 2
1234      R result
1235
1236      Do this:
1237      ((  i i i i i o o o o o  from bfd_get<size>
1238      and           S S S S S) to get the size offset we want
1239      +   r r r r r r r r r r) to get the final value to place
1240      and           D D D D D  to chop to right size
1241      -----------------------
1242      =             A A A A A
1243      And this:
1244      (   i i i i i o o o o o  from bfd_get<size>
1245      and N N N N N          ) get instruction
1246      -----------------------
1247      =   B B B B B
1248
1249      And then:
1250      (   B B B B B
1251      or            A A A A A)
1252      -----------------------
1253      =   R R R R R R R R R R  put into bfd_put<size>
1254      */
1255
1256 #define DOIT(x) \
1257   x = ( (x & ~howto->dst_mask) | (((x & howto->src_mask) +  relocation) & howto->dst_mask))
1258
1259   data = (bfd_byte *) data_start + (octets - data_start_offset);
1260
1261   switch (howto->size)
1262     {
1263     case 0:
1264       {
1265         char x = bfd_get_8 (abfd, data);
1266         DOIT (x);
1267         bfd_put_8 (abfd, x, data);
1268       }
1269       break;
1270
1271     case 1:
1272       {
1273         short x = bfd_get_16 (abfd, data);
1274         DOIT (x);
1275         bfd_put_16 (abfd, (bfd_vma) x, data);
1276       }
1277       break;
1278     case 2:
1279       {
1280         long x = bfd_get_32 (abfd, data);
1281         DOIT (x);
1282         bfd_put_32 (abfd, (bfd_vma) x, data);
1283       }
1284       break;
1285     case -2:
1286       {
1287         long x = bfd_get_32 (abfd, data);
1288         relocation = -relocation;
1289         DOIT (x);
1290         bfd_put_32 (abfd, (bfd_vma) x, data);
1291       }
1292       break;
1293
1294     case 3:
1295       /* Do nothing */
1296       break;
1297
1298     case 4:
1299       {
1300         bfd_vma x = bfd_get_64 (abfd, data);
1301         DOIT (x);
1302         bfd_put_64 (abfd, x, data);
1303       }
1304       break;
1305     default:
1306       return bfd_reloc_other;
1307     }
1308
1309   return flag;
1310 }
1311
1312 /* This relocation routine is used by some of the backend linkers.
1313    They do not construct asymbol or arelent structures, so there is no
1314    reason for them to use bfd_perform_relocation.  Also,
1315    bfd_perform_relocation is so hacked up it is easier to write a new
1316    function than to try to deal with it.
1317
1318    This routine does a final relocation.  Whether it is useful for a
1319    relocatable link depends upon how the object format defines
1320    relocations.
1321
1322    FIXME: This routine ignores any special_function in the HOWTO,
1323    since the existing special_function values have been written for
1324    bfd_perform_relocation.
1325
1326    HOWTO is the reloc howto information.
1327    INPUT_BFD is the BFD which the reloc applies to.
1328    INPUT_SECTION is the section which the reloc applies to.
1329    CONTENTS is the contents of the section.
1330    ADDRESS is the address of the reloc within INPUT_SECTION.
1331    VALUE is the value of the symbol the reloc refers to.
1332    ADDEND is the addend of the reloc.  */
1333
1334 bfd_reloc_status_type
1335 _bfd_final_link_relocate (reloc_howto_type *howto,
1336                           bfd *input_bfd,
1337                           asection *input_section,
1338                           bfd_byte *contents,
1339                           bfd_vma address,
1340                           bfd_vma value,
1341                           bfd_vma addend)
1342 {
1343   bfd_vma relocation;
1344
1345   /* Sanity check the address.  */
1346   if (address > bfd_get_section_limit (input_bfd, input_section))
1347     return bfd_reloc_outofrange;
1348
1349   /* This function assumes that we are dealing with a basic relocation
1350      against a symbol.  We want to compute the value of the symbol to
1351      relocate to.  This is just VALUE, the value of the symbol, plus
1352      ADDEND, any addend associated with the reloc.  */
1353   relocation = value + addend;
1354
1355   /* If the relocation is PC relative, we want to set RELOCATION to
1356      the distance between the symbol (currently in RELOCATION) and the
1357      location we are relocating.  Some targets (e.g., i386-aout)
1358      arrange for the contents of the section to be the negative of the
1359      offset of the location within the section; for such targets
1360      pcrel_offset is FALSE.  Other targets (e.g., m88kbcs or ELF)
1361      simply leave the contents of the section as zero; for such
1362      targets pcrel_offset is TRUE.  If pcrel_offset is FALSE we do not
1363      need to subtract out the offset of the location within the
1364      section (which is just ADDRESS).  */
1365   if (howto->pc_relative)
1366     {
1367       relocation -= (input_section->output_section->vma
1368                      + input_section->output_offset);
1369       if (howto->pcrel_offset)
1370         relocation -= address;
1371     }
1372
1373   return _bfd_relocate_contents (howto, input_bfd, relocation,
1374                                  contents + address);
1375 }
1376
1377 /* Relocate a given location using a given value and howto.  */
1378
1379 bfd_reloc_status_type
1380 _bfd_relocate_contents (reloc_howto_type *howto,
1381                         bfd *input_bfd,
1382                         bfd_vma relocation,
1383                         bfd_byte *location)
1384 {
1385   int size;
1386   bfd_vma x = 0;
1387   bfd_reloc_status_type flag;
1388   unsigned int rightshift = howto->rightshift;
1389   unsigned int bitpos = howto->bitpos;
1390
1391   /* If the size is negative, negate RELOCATION.  This isn't very
1392      general.  */
1393   if (howto->size < 0)
1394     relocation = -relocation;
1395
1396   /* Get the value we are going to relocate.  */
1397   size = bfd_get_reloc_size (howto);
1398   switch (size)
1399     {
1400     default:
1401     case 0:
1402       abort ();
1403     case 1:
1404       x = bfd_get_8 (input_bfd, location);
1405       break;
1406     case 2:
1407       x = bfd_get_16 (input_bfd, location);
1408       break;
1409     case 4:
1410       x = bfd_get_32 (input_bfd, location);
1411       break;
1412     case 8:
1413 #ifdef BFD64
1414       x = bfd_get_64 (input_bfd, location);
1415 #else
1416       abort ();
1417 #endif
1418       break;
1419     }
1420
1421   /* Check for overflow.  FIXME: We may drop bits during the addition
1422      which we don't check for.  We must either check at every single
1423      operation, which would be tedious, or we must do the computations
1424      in a type larger than bfd_vma, which would be inefficient.  */
1425   flag = bfd_reloc_ok;
1426   if (howto->complain_on_overflow != complain_overflow_dont)
1427     {
1428       bfd_vma addrmask, fieldmask, signmask, ss;
1429       bfd_vma a, b, sum;
1430
1431       /* Get the values to be added together.  For signed and unsigned
1432          relocations, we assume that all values should be truncated to
1433          the size of an address.  For bitfields, all the bits matter.
1434          See also bfd_check_overflow.  */
1435       fieldmask = N_ONES (howto->bitsize);
1436       signmask = ~fieldmask;
1437       addrmask = N_ONES (bfd_arch_bits_per_address (input_bfd)) | fieldmask;
1438       a = (relocation & addrmask) >> rightshift;
1439       b = (x & howto->src_mask & addrmask) >> bitpos;
1440
1441       switch (howto->complain_on_overflow)
1442         {
1443         case complain_overflow_signed:
1444           /* If any sign bits are set, all sign bits must be set.
1445              That is, A must be a valid negative address after
1446              shifting.  */
1447           signmask = ~(fieldmask >> 1);
1448           /* Fall thru */
1449
1450         case complain_overflow_bitfield:
1451           /* Much like the signed check, but for a field one bit
1452              wider.  We allow a bitfield to represent numbers in the
1453              range -2**n to 2**n-1, where n is the number of bits in the
1454              field.  Note that when bfd_vma is 32 bits, a 32-bit reloc
1455              can't overflow, which is exactly what we want.  */
1456           ss = a & signmask;
1457           if (ss != 0 && ss != ((addrmask >> rightshift) & signmask))
1458             flag = bfd_reloc_overflow;
1459
1460           /* We only need this next bit of code if the sign bit of B
1461              is below the sign bit of A.  This would only happen if
1462              SRC_MASK had fewer bits than BITSIZE.  Note that if
1463              SRC_MASK has more bits than BITSIZE, we can get into
1464              trouble; we would need to verify that B is in range, as
1465              we do for A above.  */
1466           ss = ((~howto->src_mask) >> 1) & howto->src_mask;
1467           ss >>= bitpos;
1468
1469           /* Set all the bits above the sign bit.  */
1470           b = (b ^ ss) - ss;
1471
1472           /* Now we can do the addition.  */
1473           sum = a + b;
1474
1475           /* See if the result has the correct sign.  Bits above the
1476              sign bit are junk now; ignore them.  If the sum is
1477              positive, make sure we did not have all negative inputs;
1478              if the sum is negative, make sure we did not have all
1479              positive inputs.  The test below looks only at the sign
1480              bits, and it really just
1481                  SIGN (A) == SIGN (B) && SIGN (A) != SIGN (SUM)
1482
1483              We mask with addrmask here to explicitly allow an address
1484              wrap-around.  The Linux kernel relies on it, and it is
1485              the only way to write assembler code which can run when
1486              loaded at a location 0x80000000 away from the location at
1487              which it is linked.  */
1488           if (((~(a ^ b)) & (a ^ sum)) & signmask & addrmask)
1489             flag = bfd_reloc_overflow;
1490           break;
1491
1492         case complain_overflow_unsigned:
1493           /* Checking for an unsigned overflow is relatively easy:
1494              trim the addresses and add, and trim the result as well.
1495              Overflow is normally indicated when the result does not
1496              fit in the field.  However, we also need to consider the
1497              case when, e.g., fieldmask is 0x7fffffff or smaller, an
1498              input is 0x80000000, and bfd_vma is only 32 bits; then we
1499              will get sum == 0, but there is an overflow, since the
1500              inputs did not fit in the field.  Instead of doing a
1501              separate test, we can check for this by or-ing in the
1502              operands when testing for the sum overflowing its final
1503              field.  */
1504           sum = (a + b) & addrmask;
1505           if ((a | b | sum) & signmask)
1506             flag = bfd_reloc_overflow;
1507           break;
1508
1509         default:
1510           abort ();
1511         }
1512     }
1513
1514   /* Put RELOCATION in the right bits.  */
1515   relocation >>= (bfd_vma) rightshift;
1516   relocation <<= (bfd_vma) bitpos;
1517
1518   /* Add RELOCATION to the right bits of X.  */
1519   x = ((x & ~howto->dst_mask)
1520        | (((x & howto->src_mask) + relocation) & howto->dst_mask));
1521
1522   /* Put the relocated value back in the object file.  */
1523   switch (size)
1524     {
1525     default:
1526       abort ();
1527     case 1:
1528       bfd_put_8 (input_bfd, x, location);
1529       break;
1530     case 2:
1531       bfd_put_16 (input_bfd, x, location);
1532       break;
1533     case 4:
1534       bfd_put_32 (input_bfd, x, location);
1535       break;
1536     case 8:
1537 #ifdef BFD64
1538       bfd_put_64 (input_bfd, x, location);
1539 #else
1540       abort ();
1541 #endif
1542       break;
1543     }
1544
1545   return flag;
1546 }
1547
1548 /* Clear a given location using a given howto, by applying a relocation value
1549    of zero and discarding any in-place addend.  This is used for fixed-up
1550    relocations against discarded symbols, to make ignorable debug or unwind
1551    information more obvious.  */
1552
1553 void
1554 _bfd_clear_contents (reloc_howto_type *howto,
1555                      bfd *input_bfd,
1556                      bfd_byte *location)
1557 {
1558   int size;
1559   bfd_vma x = 0;
1560
1561   /* Get the value we are going to relocate.  */
1562   size = bfd_get_reloc_size (howto);
1563   switch (size)
1564     {
1565     default:
1566     case 0:
1567       abort ();
1568     case 1:
1569       x = bfd_get_8 (input_bfd, location);
1570       break;
1571     case 2:
1572       x = bfd_get_16 (input_bfd, location);
1573       break;
1574     case 4:
1575       x = bfd_get_32 (input_bfd, location);
1576       break;
1577     case 8:
1578 #ifdef BFD64
1579       x = bfd_get_64 (input_bfd, location);
1580 #else
1581       abort ();
1582 #endif
1583       break;
1584     }
1585
1586   /* Zero out the unwanted bits of X.  */
1587   x &= ~howto->dst_mask;
1588
1589   /* Put the relocated value back in the object file.  */
1590   switch (size)
1591     {
1592     default:
1593     case 0:
1594       abort ();
1595     case 1:
1596       bfd_put_8 (input_bfd, x, location);
1597       break;
1598     case 2:
1599       bfd_put_16 (input_bfd, x, location);
1600       break;
1601     case 4:
1602       bfd_put_32 (input_bfd, x, location);
1603       break;
1604     case 8:
1605 #ifdef BFD64
1606       bfd_put_64 (input_bfd, x, location);
1607 #else
1608       abort ();
1609 #endif
1610       break;
1611     }
1612 }
1613
1614 /*
1615 DOCDD
1616 INODE
1617         howto manager,  , typedef arelent, Relocations
1618
1619 SUBSECTION
1620         The howto manager
1621
1622         When an application wants to create a relocation, but doesn't
1623         know what the target machine might call it, it can find out by
1624         using this bit of code.
1625
1626 */
1627
1628 /*
1629 TYPEDEF
1630         bfd_reloc_code_type
1631
1632 DESCRIPTION
1633         The insides of a reloc code.  The idea is that, eventually, there
1634         will be one enumerator for every type of relocation we ever do.
1635         Pass one of these values to <<bfd_reloc_type_lookup>>, and it'll
1636         return a howto pointer.
1637
1638         This does mean that the application must determine the correct
1639         enumerator value; you can't get a howto pointer from a random set
1640         of attributes.
1641
1642 SENUM
1643    bfd_reloc_code_real
1644
1645 ENUM
1646   BFD_RELOC_64
1647 ENUMX
1648   BFD_RELOC_32
1649 ENUMX
1650   BFD_RELOC_26
1651 ENUMX
1652   BFD_RELOC_24
1653 ENUMX
1654   BFD_RELOC_16
1655 ENUMX
1656   BFD_RELOC_14
1657 ENUMX
1658   BFD_RELOC_8
1659 ENUMDOC
1660   Basic absolute relocations of N bits.
1661
1662 ENUM
1663   BFD_RELOC_64_PCREL
1664 ENUMX
1665   BFD_RELOC_32_PCREL
1666 ENUMX
1667   BFD_RELOC_24_PCREL
1668 ENUMX
1669   BFD_RELOC_16_PCREL
1670 ENUMX
1671   BFD_RELOC_12_PCREL
1672 ENUMX
1673   BFD_RELOC_8_PCREL
1674 ENUMDOC
1675   PC-relative relocations.  Sometimes these are relative to the address
1676 of the relocation itself; sometimes they are relative to the start of
1677 the section containing the relocation.  It depends on the specific target.
1678
1679 The 24-bit relocation is used in some Intel 960 configurations.
1680
1681 ENUM
1682   BFD_RELOC_32_SECREL
1683 ENUMDOC
1684   Section relative relocations.  Some targets need this for DWARF2.
1685
1686 ENUM
1687   BFD_RELOC_32_GOT_PCREL
1688 ENUMX
1689   BFD_RELOC_16_GOT_PCREL
1690 ENUMX
1691   BFD_RELOC_8_GOT_PCREL
1692 ENUMX
1693   BFD_RELOC_32_GOTOFF
1694 ENUMX
1695   BFD_RELOC_16_GOTOFF
1696 ENUMX
1697   BFD_RELOC_LO16_GOTOFF
1698 ENUMX
1699   BFD_RELOC_HI16_GOTOFF
1700 ENUMX
1701   BFD_RELOC_HI16_S_GOTOFF
1702 ENUMX
1703   BFD_RELOC_8_GOTOFF
1704 ENUMX
1705   BFD_RELOC_64_PLT_PCREL
1706 ENUMX
1707   BFD_RELOC_32_PLT_PCREL
1708 ENUMX
1709   BFD_RELOC_24_PLT_PCREL
1710 ENUMX
1711   BFD_RELOC_16_PLT_PCREL
1712 ENUMX
1713   BFD_RELOC_8_PLT_PCREL
1714 ENUMX
1715   BFD_RELOC_64_PLTOFF
1716 ENUMX
1717   BFD_RELOC_32_PLTOFF
1718 ENUMX
1719   BFD_RELOC_16_PLTOFF
1720 ENUMX
1721   BFD_RELOC_LO16_PLTOFF
1722 ENUMX
1723   BFD_RELOC_HI16_PLTOFF
1724 ENUMX
1725   BFD_RELOC_HI16_S_PLTOFF
1726 ENUMX
1727   BFD_RELOC_8_PLTOFF
1728 ENUMDOC
1729   For ELF.
1730
1731 ENUM
1732   BFD_RELOC_68K_GLOB_DAT
1733 ENUMX
1734   BFD_RELOC_68K_JMP_SLOT
1735 ENUMX
1736   BFD_RELOC_68K_RELATIVE
1737 ENUMDOC
1738   Relocations used by 68K ELF.
1739
1740 ENUM
1741   BFD_RELOC_32_BASEREL
1742 ENUMX
1743   BFD_RELOC_16_BASEREL
1744 ENUMX
1745   BFD_RELOC_LO16_BASEREL
1746 ENUMX
1747   BFD_RELOC_HI16_BASEREL
1748 ENUMX
1749   BFD_RELOC_HI16_S_BASEREL
1750 ENUMX
1751   BFD_RELOC_8_BASEREL
1752 ENUMX
1753   BFD_RELOC_RVA
1754 ENUMDOC
1755   Linkage-table relative.
1756
1757 ENUM
1758   BFD_RELOC_8_FFnn
1759 ENUMDOC
1760   Absolute 8-bit relocation, but used to form an address like 0xFFnn.
1761
1762 ENUM
1763   BFD_RELOC_32_PCREL_S2
1764 ENUMX
1765   BFD_RELOC_16_PCREL_S2
1766 ENUMX
1767   BFD_RELOC_23_PCREL_S2
1768 ENUMDOC
1769   These PC-relative relocations are stored as word displacements --
1770 i.e., byte displacements shifted right two bits.  The 30-bit word
1771 displacement (<<32_PCREL_S2>> -- 32 bits, shifted 2) is used on the
1772 SPARC.  (SPARC tools generally refer to this as <<WDISP30>>.)  The
1773 signed 16-bit displacement is used on the MIPS, and the 23-bit
1774 displacement is used on the Alpha.
1775
1776 ENUM
1777   BFD_RELOC_HI22
1778 ENUMX
1779   BFD_RELOC_LO10
1780 ENUMDOC
1781   High 22 bits and low 10 bits of 32-bit value, placed into lower bits of
1782 the target word.  These are used on the SPARC.
1783
1784 ENUM
1785   BFD_RELOC_GPREL16
1786 ENUMX
1787   BFD_RELOC_GPREL32
1788 ENUMDOC
1789   For systems that allocate a Global Pointer register, these are
1790 displacements off that register.  These relocation types are
1791 handled specially, because the value the register will have is
1792 decided relatively late.
1793
1794 ENUM
1795   BFD_RELOC_I960_CALLJ
1796 ENUMDOC
1797   Reloc types used for i960/b.out.
1798
1799 ENUM
1800   BFD_RELOC_NONE
1801 ENUMX
1802   BFD_RELOC_SPARC_WDISP22
1803 ENUMX
1804   BFD_RELOC_SPARC22
1805 ENUMX
1806   BFD_RELOC_SPARC13
1807 ENUMX
1808   BFD_RELOC_SPARC_GOT10
1809 ENUMX
1810   BFD_RELOC_SPARC_GOT13
1811 ENUMX
1812   BFD_RELOC_SPARC_GOT22
1813 ENUMX
1814   BFD_RELOC_SPARC_PC10
1815 ENUMX
1816   BFD_RELOC_SPARC_PC22
1817 ENUMX
1818   BFD_RELOC_SPARC_WPLT30
1819 ENUMX
1820   BFD_RELOC_SPARC_COPY
1821 ENUMX
1822   BFD_RELOC_SPARC_GLOB_DAT
1823 ENUMX
1824   BFD_RELOC_SPARC_JMP_SLOT
1825 ENUMX
1826   BFD_RELOC_SPARC_RELATIVE
1827 ENUMX
1828   BFD_RELOC_SPARC_UA16
1829 ENUMX
1830   BFD_RELOC_SPARC_UA32
1831 ENUMX
1832   BFD_RELOC_SPARC_UA64
1833 ENUMDOC
1834   SPARC ELF relocations.  There is probably some overlap with other
1835   relocation types already defined.
1836
1837 ENUM
1838   BFD_RELOC_SPARC_BASE13
1839 ENUMX
1840   BFD_RELOC_SPARC_BASE22
1841 ENUMDOC
1842   I think these are specific to SPARC a.out (e.g., Sun 4).
1843
1844 ENUMEQ
1845   BFD_RELOC_SPARC_64
1846   BFD_RELOC_64
1847 ENUMX
1848   BFD_RELOC_SPARC_10
1849 ENUMX
1850   BFD_RELOC_SPARC_11
1851 ENUMX
1852   BFD_RELOC_SPARC_OLO10
1853 ENUMX
1854   BFD_RELOC_SPARC_HH22
1855 ENUMX
1856   BFD_RELOC_SPARC_HM10
1857 ENUMX
1858   BFD_RELOC_SPARC_LM22
1859 ENUMX
1860   BFD_RELOC_SPARC_PC_HH22
1861 ENUMX
1862   BFD_RELOC_SPARC_PC_HM10
1863 ENUMX
1864   BFD_RELOC_SPARC_PC_LM22
1865 ENUMX
1866   BFD_RELOC_SPARC_WDISP16
1867 ENUMX
1868   BFD_RELOC_SPARC_WDISP19
1869 ENUMX
1870   BFD_RELOC_SPARC_7
1871 ENUMX
1872   BFD_RELOC_SPARC_6
1873 ENUMX
1874   BFD_RELOC_SPARC_5
1875 ENUMEQX
1876   BFD_RELOC_SPARC_DISP64
1877   BFD_RELOC_64_PCREL
1878 ENUMX
1879   BFD_RELOC_SPARC_PLT32
1880 ENUMX
1881   BFD_RELOC_SPARC_PLT64
1882 ENUMX
1883   BFD_RELOC_SPARC_HIX22
1884 ENUMX
1885   BFD_RELOC_SPARC_LOX10
1886 ENUMX
1887   BFD_RELOC_SPARC_H44
1888 ENUMX
1889   BFD_RELOC_SPARC_M44
1890 ENUMX
1891   BFD_RELOC_SPARC_L44
1892 ENUMX
1893   BFD_RELOC_SPARC_REGISTER
1894 ENUMDOC
1895   SPARC64 relocations
1896
1897 ENUM
1898   BFD_RELOC_SPARC_REV32
1899 ENUMDOC
1900   SPARC little endian relocation
1901 ENUM
1902   BFD_RELOC_SPARC_TLS_GD_HI22
1903 ENUMX
1904   BFD_RELOC_SPARC_TLS_GD_LO10
1905 ENUMX
1906   BFD_RELOC_SPARC_TLS_GD_ADD
1907 ENUMX
1908   BFD_RELOC_SPARC_TLS_GD_CALL
1909 ENUMX
1910   BFD_RELOC_SPARC_TLS_LDM_HI22
1911 ENUMX
1912   BFD_RELOC_SPARC_TLS_LDM_LO10
1913 ENUMX
1914   BFD_RELOC_SPARC_TLS_LDM_ADD
1915 ENUMX
1916   BFD_RELOC_SPARC_TLS_LDM_CALL
1917 ENUMX
1918   BFD_RELOC_SPARC_TLS_LDO_HIX22
1919 ENUMX
1920   BFD_RELOC_SPARC_TLS_LDO_LOX10
1921 ENUMX
1922   BFD_RELOC_SPARC_TLS_LDO_ADD
1923 ENUMX
1924   BFD_RELOC_SPARC_TLS_IE_HI22
1925 ENUMX
1926   BFD_RELOC_SPARC_TLS_IE_LO10
1927 ENUMX
1928   BFD_RELOC_SPARC_TLS_IE_LD
1929 ENUMX
1930   BFD_RELOC_SPARC_TLS_IE_LDX
1931 ENUMX
1932   BFD_RELOC_SPARC_TLS_IE_ADD
1933 ENUMX
1934   BFD_RELOC_SPARC_TLS_LE_HIX22
1935 ENUMX
1936   BFD_RELOC_SPARC_TLS_LE_LOX10
1937 ENUMX
1938   BFD_RELOC_SPARC_TLS_DTPMOD32
1939 ENUMX
1940   BFD_RELOC_SPARC_TLS_DTPMOD64
1941 ENUMX
1942   BFD_RELOC_SPARC_TLS_DTPOFF32
1943 ENUMX
1944   BFD_RELOC_SPARC_TLS_DTPOFF64
1945 ENUMX
1946   BFD_RELOC_SPARC_TLS_TPOFF32
1947 ENUMX
1948   BFD_RELOC_SPARC_TLS_TPOFF64
1949 ENUMDOC
1950   SPARC TLS relocations
1951
1952 ENUM
1953   BFD_RELOC_SPU_IMM7
1954 ENUMX
1955   BFD_RELOC_SPU_IMM8
1956 ENUMX
1957   BFD_RELOC_SPU_IMM10
1958 ENUMX
1959   BFD_RELOC_SPU_IMM10W
1960 ENUMX
1961   BFD_RELOC_SPU_IMM16
1962 ENUMX
1963   BFD_RELOC_SPU_IMM16W
1964 ENUMX
1965   BFD_RELOC_SPU_IMM18
1966 ENUMX
1967   BFD_RELOC_SPU_PCREL9a
1968 ENUMX
1969   BFD_RELOC_SPU_PCREL9b
1970 ENUMX
1971   BFD_RELOC_SPU_PCREL16
1972 ENUMX
1973   BFD_RELOC_SPU_LO16
1974 ENUMX
1975   BFD_RELOC_SPU_HI16
1976 ENUMX
1977   BFD_RELOC_SPU_PPU32
1978 ENUMX
1979   BFD_RELOC_SPU_PPU64
1980 ENUMDOC
1981   SPU Relocations.
1982
1983 ENUM
1984   BFD_RELOC_ALPHA_GPDISP_HI16
1985 ENUMDOC
1986   Alpha ECOFF and ELF relocations.  Some of these treat the symbol or
1987      "addend" in some special way.
1988   For GPDISP_HI16 ("gpdisp") relocations, the symbol is ignored when
1989      writing; when reading, it will be the absolute section symbol.  The
1990      addend is the displacement in bytes of the "lda" instruction from
1991      the "ldah" instruction (which is at the address of this reloc).
1992 ENUM
1993   BFD_RELOC_ALPHA_GPDISP_LO16
1994 ENUMDOC
1995   For GPDISP_LO16 ("ignore") relocations, the symbol is handled as
1996      with GPDISP_HI16 relocs.  The addend is ignored when writing the
1997      relocations out, and is filled in with the file's GP value on
1998      reading, for convenience.
1999
2000 ENUM
2001   BFD_RELOC_ALPHA_GPDISP
2002 ENUMDOC
2003   The ELF GPDISP relocation is exactly the same as the GPDISP_HI16
2004      relocation except that there is no accompanying GPDISP_LO16
2005      relocation.
2006
2007 ENUM
2008   BFD_RELOC_ALPHA_LITERAL
2009 ENUMX
2010   BFD_RELOC_ALPHA_ELF_LITERAL
2011 ENUMX
2012   BFD_RELOC_ALPHA_LITUSE
2013 ENUMDOC
2014   The Alpha LITERAL/LITUSE relocs are produced by a symbol reference;
2015      the assembler turns it into a LDQ instruction to load the address of
2016      the symbol, and then fills in a register in the real instruction.
2017
2018      The LITERAL reloc, at the LDQ instruction, refers to the .lita
2019      section symbol.  The addend is ignored when writing, but is filled
2020      in with the file's GP value on reading, for convenience, as with the
2021      GPDISP_LO16 reloc.
2022
2023      The ELF_LITERAL reloc is somewhere between 16_GOTOFF and GPDISP_LO16.
2024      It should refer to the symbol to be referenced, as with 16_GOTOFF,
2025      but it generates output not based on the position within the .got
2026      section, but relative to the GP value chosen for the file during the
2027      final link stage.
2028
2029      The LITUSE reloc, on the instruction using the loaded address, gives
2030      information to the linker that it might be able to use to optimize
2031      away some literal section references.  The symbol is ignored (read
2032      as the absolute section symbol), and the "addend" indicates the type
2033      of instruction using the register:
2034               1 - "memory" fmt insn
2035               2 - byte-manipulation (byte offset reg)
2036               3 - jsr (target of branch)
2037
2038 ENUM
2039   BFD_RELOC_ALPHA_HINT
2040 ENUMDOC
2041   The HINT relocation indicates a value that should be filled into the
2042      "hint" field of a jmp/jsr/ret instruction, for possible branch-
2043      prediction logic which may be provided on some processors.
2044
2045 ENUM
2046   BFD_RELOC_ALPHA_LINKAGE
2047 ENUMDOC
2048   The LINKAGE relocation outputs a linkage pair in the object file,
2049      which is filled by the linker.
2050
2051 ENUM
2052   BFD_RELOC_ALPHA_CODEADDR
2053 ENUMDOC
2054   The CODEADDR relocation outputs a STO_CA in the object file,
2055      which is filled by the linker.
2056
2057 ENUM
2058   BFD_RELOC_ALPHA_GPREL_HI16
2059 ENUMX
2060   BFD_RELOC_ALPHA_GPREL_LO16
2061 ENUMDOC
2062   The GPREL_HI/LO relocations together form a 32-bit offset from the
2063      GP register.
2064
2065 ENUM
2066   BFD_RELOC_ALPHA_BRSGP
2067 ENUMDOC
2068   Like BFD_RELOC_23_PCREL_S2, except that the source and target must
2069   share a common GP, and the target address is adjusted for
2070   STO_ALPHA_STD_GPLOAD.
2071
2072 ENUM
2073   BFD_RELOC_ALPHA_TLSGD
2074 ENUMX
2075   BFD_RELOC_ALPHA_TLSLDM
2076 ENUMX
2077   BFD_RELOC_ALPHA_DTPMOD64
2078 ENUMX
2079   BFD_RELOC_ALPHA_GOTDTPREL16
2080 ENUMX
2081   BFD_RELOC_ALPHA_DTPREL64
2082 ENUMX
2083   BFD_RELOC_ALPHA_DTPREL_HI16
2084 ENUMX
2085   BFD_RELOC_ALPHA_DTPREL_LO16
2086 ENUMX
2087   BFD_RELOC_ALPHA_DTPREL16
2088 ENUMX
2089   BFD_RELOC_ALPHA_GOTTPREL16
2090 ENUMX
2091   BFD_RELOC_ALPHA_TPREL64
2092 ENUMX
2093   BFD_RELOC_ALPHA_TPREL_HI16
2094 ENUMX
2095   BFD_RELOC_ALPHA_TPREL_LO16
2096 ENUMX
2097   BFD_RELOC_ALPHA_TPREL16
2098 ENUMDOC
2099   Alpha thread-local storage relocations.
2100
2101 ENUM
2102   BFD_RELOC_MIPS_JMP
2103 ENUMDOC
2104   Bits 27..2 of the relocation address shifted right 2 bits;
2105      simple reloc otherwise.
2106
2107 ENUM
2108   BFD_RELOC_MIPS16_JMP
2109 ENUMDOC
2110   The MIPS16 jump instruction.
2111
2112 ENUM
2113   BFD_RELOC_MIPS16_GPREL
2114 ENUMDOC
2115   MIPS16 GP relative reloc.
2116
2117 ENUM
2118   BFD_RELOC_HI16
2119 ENUMDOC
2120   High 16 bits of 32-bit value; simple reloc.
2121 ENUM
2122   BFD_RELOC_HI16_S
2123 ENUMDOC
2124   High 16 bits of 32-bit value but the low 16 bits will be sign
2125      extended and added to form the final result.  If the low 16
2126      bits form a negative number, we need to add one to the high value
2127      to compensate for the borrow when the low bits are added.
2128 ENUM
2129   BFD_RELOC_LO16
2130 ENUMDOC
2131   Low 16 bits.
2132
2133 ENUM
2134   BFD_RELOC_HI16_PCREL
2135 ENUMDOC
2136   High 16 bits of 32-bit pc-relative value
2137 ENUM
2138   BFD_RELOC_HI16_S_PCREL
2139 ENUMDOC
2140   High 16 bits of 32-bit pc-relative value, adjusted
2141 ENUM
2142   BFD_RELOC_LO16_PCREL
2143 ENUMDOC
2144   Low 16 bits of pc-relative value
2145
2146 ENUM
2147   BFD_RELOC_MIPS16_HI16
2148 ENUMDOC
2149   MIPS16 high 16 bits of 32-bit value.
2150 ENUM
2151   BFD_RELOC_MIPS16_HI16_S
2152 ENUMDOC
2153   MIPS16 high 16 bits of 32-bit value but the low 16 bits will be sign
2154      extended and added to form the final result.  If the low 16
2155      bits form a negative number, we need to add one to the high value
2156      to compensate for the borrow when the low bits are added.
2157 ENUM
2158   BFD_RELOC_MIPS16_LO16
2159 ENUMDOC
2160   MIPS16 low 16 bits.
2161
2162 ENUM
2163   BFD_RELOC_MIPS_LITERAL
2164 ENUMDOC
2165   Relocation against a MIPS literal section.
2166
2167 ENUM
2168   BFD_RELOC_MIPS_GOT16
2169 ENUMX
2170   BFD_RELOC_MIPS_CALL16
2171 ENUMX
2172   BFD_RELOC_MIPS_GOT_HI16
2173 ENUMX
2174   BFD_RELOC_MIPS_GOT_LO16
2175 ENUMX
2176   BFD_RELOC_MIPS_CALL_HI16
2177 ENUMX
2178   BFD_RELOC_MIPS_CALL_LO16
2179 ENUMX
2180   BFD_RELOC_MIPS_SUB
2181 ENUMX
2182   BFD_RELOC_MIPS_GOT_PAGE
2183 ENUMX
2184   BFD_RELOC_MIPS_GOT_OFST
2185 ENUMX
2186   BFD_RELOC_MIPS_GOT_DISP
2187 ENUMX
2188   BFD_RELOC_MIPS_SHIFT5
2189 ENUMX
2190   BFD_RELOC_MIPS_SHIFT6
2191 ENUMX
2192   BFD_RELOC_MIPS_INSERT_A
2193 ENUMX
2194   BFD_RELOC_MIPS_INSERT_B
2195 ENUMX
2196   BFD_RELOC_MIPS_DELETE
2197 ENUMX
2198   BFD_RELOC_MIPS_HIGHEST
2199 ENUMX
2200   BFD_RELOC_MIPS_HIGHER
2201 ENUMX
2202   BFD_RELOC_MIPS_SCN_DISP
2203 ENUMX
2204   BFD_RELOC_MIPS_REL16
2205 ENUMX
2206   BFD_RELOC_MIPS_RELGOT
2207 ENUMX
2208   BFD_RELOC_MIPS_JALR
2209 ENUMX
2210   BFD_RELOC_MIPS_TLS_DTPMOD32
2211 ENUMX
2212   BFD_RELOC_MIPS_TLS_DTPREL32
2213 ENUMX
2214   BFD_RELOC_MIPS_TLS_DTPMOD64
2215 ENUMX
2216   BFD_RELOC_MIPS_TLS_DTPREL64
2217 ENUMX
2218   BFD_RELOC_MIPS_TLS_GD
2219 ENUMX
2220   BFD_RELOC_MIPS_TLS_LDM
2221 ENUMX
2222   BFD_RELOC_MIPS_TLS_DTPREL_HI16
2223 ENUMX
2224   BFD_RELOC_MIPS_TLS_DTPREL_LO16
2225 ENUMX
2226   BFD_RELOC_MIPS_TLS_GOTTPREL
2227 ENUMX
2228   BFD_RELOC_MIPS_TLS_TPREL32
2229 ENUMX
2230   BFD_RELOC_MIPS_TLS_TPREL64
2231 ENUMX
2232   BFD_RELOC_MIPS_TLS_TPREL_HI16
2233 ENUMX
2234   BFD_RELOC_MIPS_TLS_TPREL_LO16
2235 ENUMDOC
2236   MIPS ELF relocations.
2237 COMMENT
2238
2239 ENUM
2240   BFD_RELOC_MIPS_COPY
2241 ENUMX
2242   BFD_RELOC_MIPS_JUMP_SLOT
2243 ENUMDOC
2244   MIPS ELF relocations (VxWorks extensions).
2245 COMMENT
2246
2247 ENUM
2248   BFD_RELOC_FRV_LABEL16
2249 ENUMX
2250   BFD_RELOC_FRV_LABEL24
2251 ENUMX
2252   BFD_RELOC_FRV_LO16
2253 ENUMX
2254   BFD_RELOC_FRV_HI16
2255 ENUMX
2256   BFD_RELOC_FRV_GPREL12
2257 ENUMX
2258   BFD_RELOC_FRV_GPRELU12
2259 ENUMX
2260   BFD_RELOC_FRV_GPREL32
2261 ENUMX
2262   BFD_RELOC_FRV_GPRELHI
2263 ENUMX
2264   BFD_RELOC_FRV_GPRELLO
2265 ENUMX
2266   BFD_RELOC_FRV_GOT12
2267 ENUMX
2268   BFD_RELOC_FRV_GOTHI
2269 ENUMX
2270   BFD_RELOC_FRV_GOTLO
2271 ENUMX
2272   BFD_RELOC_FRV_FUNCDESC
2273 ENUMX
2274   BFD_RELOC_FRV_FUNCDESC_GOT12
2275 ENUMX
2276   BFD_RELOC_FRV_FUNCDESC_GOTHI
2277 ENUMX
2278   BFD_RELOC_FRV_FUNCDESC_GOTLO
2279 ENUMX
2280   BFD_RELOC_FRV_FUNCDESC_VALUE
2281 ENUMX
2282   BFD_RELOC_FRV_FUNCDESC_GOTOFF12
2283 ENUMX
2284   BFD_RELOC_FRV_FUNCDESC_GOTOFFHI
2285 ENUMX
2286   BFD_RELOC_FRV_FUNCDESC_GOTOFFLO
2287 ENUMX
2288   BFD_RELOC_FRV_GOTOFF12
2289 ENUMX
2290   BFD_RELOC_FRV_GOTOFFHI
2291 ENUMX
2292   BFD_RELOC_FRV_GOTOFFLO
2293 ENUMX
2294   BFD_RELOC_FRV_GETTLSOFF
2295 ENUMX
2296   BFD_RELOC_FRV_TLSDESC_VALUE
2297 ENUMX
2298   BFD_RELOC_FRV_GOTTLSDESC12
2299 ENUMX
2300   BFD_RELOC_FRV_GOTTLSDESCHI
2301 ENUMX
2302   BFD_RELOC_FRV_GOTTLSDESCLO
2303 ENUMX
2304   BFD_RELOC_FRV_TLSMOFF12
2305 ENUMX
2306   BFD_RELOC_FRV_TLSMOFFHI
2307 ENUMX
2308   BFD_RELOC_FRV_TLSMOFFLO
2309 ENUMX
2310   BFD_RELOC_FRV_GOTTLSOFF12
2311 ENUMX
2312   BFD_RELOC_FRV_GOTTLSOFFHI
2313 ENUMX
2314   BFD_RELOC_FRV_GOTTLSOFFLO
2315 ENUMX
2316   BFD_RELOC_FRV_TLSOFF
2317 ENUMX
2318   BFD_RELOC_FRV_TLSDESC_RELAX
2319 ENUMX
2320   BFD_RELOC_FRV_GETTLSOFF_RELAX
2321 ENUMX
2322   BFD_RELOC_FRV_TLSOFF_RELAX
2323 ENUMX
2324   BFD_RELOC_FRV_TLSMOFF
2325 ENUMDOC
2326   Fujitsu Frv Relocations.
2327 COMMENT
2328
2329 ENUM
2330   BFD_RELOC_MN10300_GOTOFF24
2331 ENUMDOC
2332   This is a 24bit GOT-relative reloc for the mn10300.
2333 ENUM
2334   BFD_RELOC_MN10300_GOT32
2335 ENUMDOC
2336   This is a 32bit GOT-relative reloc for the mn10300, offset by two bytes
2337   in the instruction.
2338 ENUM
2339   BFD_RELOC_MN10300_GOT24
2340 ENUMDOC
2341   This is a 24bit GOT-relative reloc for the mn10300, offset by two bytes
2342   in the instruction.
2343 ENUM
2344   BFD_RELOC_MN10300_GOT16
2345 ENUMDOC
2346   This is a 16bit GOT-relative reloc for the mn10300, offset by two bytes
2347   in the instruction.
2348 ENUM
2349   BFD_RELOC_MN10300_COPY
2350 ENUMDOC
2351   Copy symbol at runtime.
2352 ENUM
2353   BFD_RELOC_MN10300_GLOB_DAT
2354 ENUMDOC
2355   Create GOT entry.
2356 ENUM
2357   BFD_RELOC_MN10300_JMP_SLOT
2358 ENUMDOC
2359   Create PLT entry.
2360 ENUM
2361   BFD_RELOC_MN10300_RELATIVE
2362 ENUMDOC
2363   Adjust by program base.
2364 COMMENT
2365
2366 ENUM
2367   BFD_RELOC_386_GOT32
2368 ENUMX
2369   BFD_RELOC_386_PLT32
2370 ENUMX
2371   BFD_RELOC_386_COPY
2372 ENUMX
2373   BFD_RELOC_386_GLOB_DAT
2374 ENUMX
2375   BFD_RELOC_386_JUMP_SLOT
2376 ENUMX
2377   BFD_RELOC_386_RELATIVE
2378 ENUMX
2379   BFD_RELOC_386_GOTOFF
2380 ENUMX
2381   BFD_RELOC_386_GOTPC
2382 ENUMX
2383   BFD_RELOC_386_TLS_TPOFF
2384 ENUMX
2385   BFD_RELOC_386_TLS_IE
2386 ENUMX
2387   BFD_RELOC_386_TLS_GOTIE
2388 ENUMX
2389   BFD_RELOC_386_TLS_LE
2390 ENUMX
2391   BFD_RELOC_386_TLS_GD
2392 ENUMX
2393   BFD_RELOC_386_TLS_LDM
2394 ENUMX
2395   BFD_RELOC_386_TLS_LDO_32
2396 ENUMX
2397   BFD_RELOC_386_TLS_IE_32
2398 ENUMX
2399   BFD_RELOC_386_TLS_LE_32
2400 ENUMX
2401   BFD_RELOC_386_TLS_DTPMOD32
2402 ENUMX
2403   BFD_RELOC_386_TLS_DTPOFF32
2404 ENUMX
2405   BFD_RELOC_386_TLS_TPOFF32
2406 ENUMX
2407   BFD_RELOC_386_TLS_GOTDESC
2408 ENUMX
2409   BFD_RELOC_386_TLS_DESC_CALL
2410 ENUMX
2411   BFD_RELOC_386_TLS_DESC
2412 ENUMDOC
2413   i386/elf relocations
2414
2415 ENUM
2416   BFD_RELOC_X86_64_GOT32
2417 ENUMX
2418   BFD_RELOC_X86_64_PLT32
2419 ENUMX
2420   BFD_RELOC_X86_64_COPY
2421 ENUMX
2422   BFD_RELOC_X86_64_GLOB_DAT
2423 ENUMX
2424   BFD_RELOC_X86_64_JUMP_SLOT
2425 ENUMX
2426   BFD_RELOC_X86_64_RELATIVE
2427 ENUMX
2428   BFD_RELOC_X86_64_GOTPCREL
2429 ENUMX
2430   BFD_RELOC_X86_64_32S
2431 ENUMX
2432   BFD_RELOC_X86_64_DTPMOD64
2433 ENUMX
2434   BFD_RELOC_X86_64_DTPOFF64
2435 ENUMX
2436   BFD_RELOC_X86_64_TPOFF64
2437 ENUMX
2438   BFD_RELOC_X86_64_TLSGD
2439 ENUMX
2440   BFD_RELOC_X86_64_TLSLD
2441 ENUMX
2442   BFD_RELOC_X86_64_DTPOFF32
2443 ENUMX
2444   BFD_RELOC_X86_64_GOTTPOFF
2445 ENUMX
2446   BFD_RELOC_X86_64_TPOFF32
2447 ENUMX
2448   BFD_RELOC_X86_64_GOTOFF64
2449 ENUMX
2450   BFD_RELOC_X86_64_GOTPC32
2451 ENUMX
2452   BFD_RELOC_X86_64_GOT64
2453 ENUMX
2454   BFD_RELOC_X86_64_GOTPCREL64
2455 ENUMX
2456   BFD_RELOC_X86_64_GOTPC64
2457 ENUMX
2458   BFD_RELOC_X86_64_GOTPLT64
2459 ENUMX
2460   BFD_RELOC_X86_64_PLTOFF64
2461 ENUMX
2462   BFD_RELOC_X86_64_GOTPC32_TLSDESC
2463 ENUMX
2464   BFD_RELOC_X86_64_TLSDESC_CALL
2465 ENUMX
2466   BFD_RELOC_X86_64_TLSDESC
2467 ENUMDOC
2468   x86-64/elf relocations
2469
2470 ENUM
2471   BFD_RELOC_NS32K_IMM_8
2472 ENUMX
2473   BFD_RELOC_NS32K_IMM_16
2474 ENUMX
2475   BFD_RELOC_NS32K_IMM_32
2476 ENUMX
2477   BFD_RELOC_NS32K_IMM_8_PCREL
2478 ENUMX
2479   BFD_RELOC_NS32K_IMM_16_PCREL
2480 ENUMX
2481   BFD_RELOC_NS32K_IMM_32_PCREL
2482 ENUMX
2483   BFD_RELOC_NS32K_DISP_8
2484 ENUMX
2485   BFD_RELOC_NS32K_DISP_16
2486 ENUMX
2487   BFD_RELOC_NS32K_DISP_32
2488 ENUMX
2489   BFD_RELOC_NS32K_DISP_8_PCREL
2490 ENUMX
2491   BFD_RELOC_NS32K_DISP_16_PCREL
2492 ENUMX
2493   BFD_RELOC_NS32K_DISP_32_PCREL
2494 ENUMDOC
2495   ns32k relocations
2496
2497 ENUM
2498   BFD_RELOC_PDP11_DISP_8_PCREL
2499 ENUMX
2500   BFD_RELOC_PDP11_DISP_6_PCREL
2501 ENUMDOC
2502   PDP11 relocations
2503
2504 ENUM
2505   BFD_RELOC_PJ_CODE_HI16
2506 ENUMX
2507   BFD_RELOC_PJ_CODE_LO16
2508 ENUMX
2509   BFD_RELOC_PJ_CODE_DIR16
2510 ENUMX
2511   BFD_RELOC_PJ_CODE_DIR32
2512 ENUMX
2513   BFD_RELOC_PJ_CODE_REL16
2514 ENUMX
2515   BFD_RELOC_PJ_CODE_REL32
2516 ENUMDOC
2517   Picojava relocs.  Not all of these appear in object files.
2518
2519 ENUM
2520   BFD_RELOC_PPC_B26
2521 ENUMX
2522   BFD_RELOC_PPC_BA26
2523 ENUMX
2524   BFD_RELOC_PPC_TOC16
2525 ENUMX
2526   BFD_RELOC_PPC_B16
2527 ENUMX
2528   BFD_RELOC_PPC_B16_BRTAKEN
2529 ENUMX
2530   BFD_RELOC_PPC_B16_BRNTAKEN
2531 ENUMX
2532   BFD_RELOC_PPC_BA16
2533 ENUMX
2534   BFD_RELOC_PPC_BA16_BRTAKEN
2535 ENUMX
2536   BFD_RELOC_PPC_BA16_BRNTAKEN
2537 ENUMX
2538   BFD_RELOC_PPC_COPY
2539 ENUMX
2540   BFD_RELOC_PPC_GLOB_DAT
2541 ENUMX
2542   BFD_RELOC_PPC_JMP_SLOT
2543 ENUMX
2544   BFD_RELOC_PPC_RELATIVE
2545 ENUMX
2546   BFD_RELOC_PPC_LOCAL24PC
2547 ENUMX
2548   BFD_RELOC_PPC_EMB_NADDR32
2549 ENUMX
2550   BFD_RELOC_PPC_EMB_NADDR16
2551 ENUMX
2552   BFD_RELOC_PPC_EMB_NADDR16_LO
2553 ENUMX
2554   BFD_RELOC_PPC_EMB_NADDR16_HI
2555 ENUMX
2556   BFD_RELOC_PPC_EMB_NADDR16_HA
2557 ENUMX
2558   BFD_RELOC_PPC_EMB_SDAI16
2559 ENUMX
2560   BFD_RELOC_PPC_EMB_SDA2I16
2561 ENUMX
2562   BFD_RELOC_PPC_EMB_SDA2REL
2563 ENUMX
2564   BFD_RELOC_PPC_EMB_SDA21
2565 ENUMX
2566   BFD_RELOC_PPC_EMB_MRKREF
2567 ENUMX
2568   BFD_RELOC_PPC_EMB_RELSEC16
2569 ENUMX
2570   BFD_RELOC_PPC_EMB_RELST_LO
2571 ENUMX
2572   BFD_RELOC_PPC_EMB_RELST_HI
2573 ENUMX
2574   BFD_RELOC_PPC_EMB_RELST_HA
2575 ENUMX
2576   BFD_RELOC_PPC_EMB_BIT_FLD
2577 ENUMX
2578   BFD_RELOC_PPC_EMB_RELSDA
2579 ENUMX
2580   BFD_RELOC_PPC64_HIGHER
2581 ENUMX
2582   BFD_RELOC_PPC64_HIGHER_S
2583 ENUMX
2584   BFD_RELOC_PPC64_HIGHEST
2585 ENUMX
2586   BFD_RELOC_PPC64_HIGHEST_S
2587 ENUMX
2588   BFD_RELOC_PPC64_TOC16_LO
2589 ENUMX
2590   BFD_RELOC_PPC64_TOC16_HI
2591 ENUMX
2592   BFD_RELOC_PPC64_TOC16_HA
2593 ENUMX
2594   BFD_RELOC_PPC64_TOC
2595 ENUMX
2596   BFD_RELOC_PPC64_PLTGOT16
2597 ENUMX
2598   BFD_RELOC_PPC64_PLTGOT16_LO
2599 ENUMX
2600   BFD_RELOC_PPC64_PLTGOT16_HI
2601 ENUMX
2602   BFD_RELOC_PPC64_PLTGOT16_HA
2603 ENUMX
2604   BFD_RELOC_PPC64_ADDR16_DS
2605 ENUMX
2606   BFD_RELOC_PPC64_ADDR16_LO_DS
2607 ENUMX
2608   BFD_RELOC_PPC64_GOT16_DS
2609 ENUMX
2610   BFD_RELOC_PPC64_GOT16_LO_DS
2611 ENUMX
2612   BFD_RELOC_PPC64_PLT16_LO_DS
2613 ENUMX
2614   BFD_RELOC_PPC64_SECTOFF_DS
2615 ENUMX
2616   BFD_RELOC_PPC64_SECTOFF_LO_DS
2617 ENUMX
2618   BFD_RELOC_PPC64_TOC16_DS
2619 ENUMX
2620   BFD_RELOC_PPC64_TOC16_LO_DS
2621 ENUMX
2622   BFD_RELOC_PPC64_PLTGOT16_DS
2623 ENUMX
2624   BFD_RELOC_PPC64_PLTGOT16_LO_DS
2625 ENUMDOC
2626   Power(rs6000) and PowerPC relocations.
2627
2628 ENUM
2629   BFD_RELOC_PPC_TLS
2630 ENUMX
2631   BFD_RELOC_PPC_DTPMOD
2632 ENUMX
2633   BFD_RELOC_PPC_TPREL16
2634 ENUMX
2635   BFD_RELOC_PPC_TPREL16_LO
2636 ENUMX
2637   BFD_RELOC_PPC_TPREL16_HI
2638 ENUMX
2639   BFD_RELOC_PPC_TPREL16_HA
2640 ENUMX
2641   BFD_RELOC_PPC_TPREL
2642 ENUMX
2643   BFD_RELOC_PPC_DTPREL16
2644 ENUMX
2645   BFD_RELOC_PPC_DTPREL16_LO
2646 ENUMX
2647   BFD_RELOC_PPC_DTPREL16_HI
2648 ENUMX
2649   BFD_RELOC_PPC_DTPREL16_HA
2650 ENUMX
2651   BFD_RELOC_PPC_DTPREL
2652 ENUMX
2653   BFD_RELOC_PPC_GOT_TLSGD16
2654 ENUMX
2655   BFD_RELOC_PPC_GOT_TLSGD16_LO
2656 ENUMX
2657   BFD_RELOC_PPC_GOT_TLSGD16_HI
2658 ENUMX
2659   BFD_RELOC_PPC_GOT_TLSGD16_HA
2660 ENUMX
2661   BFD_RELOC_PPC_GOT_TLSLD16
2662 ENUMX
2663   BFD_RELOC_PPC_GOT_TLSLD16_LO
2664 ENUMX
2665   BFD_RELOC_PPC_GOT_TLSLD16_HI
2666 ENUMX
2667   BFD_RELOC_PPC_GOT_TLSLD16_HA
2668 ENUMX
2669   BFD_RELOC_PPC_GOT_TPREL16
2670 ENUMX
2671   BFD_RELOC_PPC_GOT_TPREL16_LO
2672 ENUMX
2673   BFD_RELOC_PPC_GOT_TPREL16_HI
2674 ENUMX
2675   BFD_RELOC_PPC_GOT_TPREL16_HA
2676 ENUMX
2677   BFD_RELOC_PPC_GOT_DTPREL16
2678 ENUMX
2679   BFD_RELOC_PPC_GOT_DTPREL16_LO
2680 ENUMX
2681   BFD_RELOC_PPC_GOT_DTPREL16_HI
2682 ENUMX
2683   BFD_RELOC_PPC_GOT_DTPREL16_HA
2684 ENUMX
2685   BFD_RELOC_PPC64_TPREL16_DS
2686 ENUMX
2687   BFD_RELOC_PPC64_TPREL16_LO_DS
2688 ENUMX
2689   BFD_RELOC_PPC64_TPREL16_HIGHER
2690 ENUMX
2691   BFD_RELOC_PPC64_TPREL16_HIGHERA
2692 ENUMX
2693   BFD_RELOC_PPC64_TPREL16_HIGHEST
2694 ENUMX
2695   BFD_RELOC_PPC64_TPREL16_HIGHESTA
2696 ENUMX
2697   BFD_RELOC_PPC64_DTPREL16_DS
2698 ENUMX
2699   BFD_RELOC_PPC64_DTPREL16_LO_DS
2700 ENUMX
2701   BFD_RELOC_PPC64_DTPREL16_HIGHER
2702 ENUMX
2703   BFD_RELOC_PPC64_DTPREL16_HIGHERA
2704 ENUMX
2705   BFD_RELOC_PPC64_DTPREL16_HIGHEST
2706 ENUMX
2707   BFD_RELOC_PPC64_DTPREL16_HIGHESTA
2708 ENUMDOC
2709   PowerPC and PowerPC64 thread-local storage relocations.
2710
2711 ENUM
2712   BFD_RELOC_I370_D12
2713 ENUMDOC
2714   IBM 370/390 relocations
2715
2716 ENUM
2717   BFD_RELOC_CTOR
2718 ENUMDOC
2719   The type of reloc used to build a constructor table - at the moment
2720   probably a 32 bit wide absolute relocation, but the target can choose.
2721   It generally does map to one of the other relocation types.
2722
2723 ENUM
2724   BFD_RELOC_ARM_PCREL_BRANCH
2725 ENUMDOC
2726   ARM 26 bit pc-relative branch.  The lowest two bits must be zero and are
2727   not stored in the instruction.
2728 ENUM
2729   BFD_RELOC_ARM_PCREL_BLX
2730 ENUMDOC
2731   ARM 26 bit pc-relative branch.  The lowest bit must be zero and is
2732   not stored in the instruction.  The 2nd lowest bit comes from a 1 bit
2733   field in the instruction.
2734 ENUM
2735   BFD_RELOC_THUMB_PCREL_BLX
2736 ENUMDOC
2737   Thumb 22 bit pc-relative branch.  The lowest bit must be zero and is
2738   not stored in the instruction.  The 2nd lowest bit comes from a 1 bit
2739   field in the instruction.
2740 ENUM
2741   BFD_RELOC_ARM_PCREL_CALL
2742 ENUMDOC
2743   ARM 26-bit pc-relative branch for an unconditional BL or BLX instruction.
2744 ENUM
2745   BFD_RELOC_ARM_PCREL_JUMP
2746 ENUMDOC
2747   ARM 26-bit pc-relative branch for B or conditional BL instruction.
2748
2749 ENUM
2750   BFD_RELOC_THUMB_PCREL_BRANCH7
2751 ENUMX
2752   BFD_RELOC_THUMB_PCREL_BRANCH9
2753 ENUMX
2754   BFD_RELOC_THUMB_PCREL_BRANCH12
2755 ENUMX
2756   BFD_RELOC_THUMB_PCREL_BRANCH20
2757 ENUMX
2758   BFD_RELOC_THUMB_PCREL_BRANCH23
2759 ENUMX
2760   BFD_RELOC_THUMB_PCREL_BRANCH25
2761 ENUMDOC
2762   Thumb 7-, 9-, 12-, 20-, 23-, and 25-bit pc-relative branches.
2763   The lowest bit must be zero and is not stored in the instruction.
2764   Note that the corresponding ELF R_ARM_THM_JUMPnn constant has an
2765   "nn" one smaller in all cases.  Note further that BRANCH23
2766   corresponds to R_ARM_THM_CALL.
2767
2768 ENUM
2769   BFD_RELOC_ARM_OFFSET_IMM
2770 ENUMDOC
2771   12-bit immediate offset, used in ARM-format ldr and str instructions.
2772
2773 ENUM
2774   BFD_RELOC_ARM_THUMB_OFFSET
2775 ENUMDOC
2776   5-bit immediate offset, used in Thumb-format ldr and str instructions.
2777
2778 ENUM
2779   BFD_RELOC_ARM_TARGET1
2780 ENUMDOC
2781   Pc-relative or absolute relocation depending on target.  Used for
2782   entries in .init_array sections.
2783 ENUM
2784   BFD_RELOC_ARM_ROSEGREL32
2785 ENUMDOC
2786   Read-only segment base relative address.
2787 ENUM
2788   BFD_RELOC_ARM_SBREL32
2789 ENUMDOC
2790   Data segment base relative address.
2791 ENUM
2792   BFD_RELOC_ARM_TARGET2
2793 ENUMDOC
2794   This reloc is used for references to RTTI data from exception handling
2795   tables.  The actual definition depends on the target.  It may be a
2796   pc-relative or some form of GOT-indirect relocation.
2797 ENUM
2798   BFD_RELOC_ARM_PREL31
2799 ENUMDOC
2800   31-bit PC relative address.
2801 ENUM
2802   BFD_RELOC_ARM_MOVW
2803 ENUMX
2804   BFD_RELOC_ARM_MOVT
2805 ENUMX
2806   BFD_RELOC_ARM_MOVW_PCREL
2807 ENUMX
2808   BFD_RELOC_ARM_MOVT_PCREL
2809 ENUMX
2810   BFD_RELOC_ARM_THUMB_MOVW
2811 ENUMX
2812   BFD_RELOC_ARM_THUMB_MOVT
2813 ENUMX
2814   BFD_RELOC_ARM_THUMB_MOVW_PCREL
2815 ENUMX
2816   BFD_RELOC_ARM_THUMB_MOVT_PCREL
2817 ENUMDOC
2818   Low and High halfword relocations for MOVW and MOVT instructions.
2819
2820 ENUM
2821   BFD_RELOC_ARM_JUMP_SLOT
2822 ENUMX
2823   BFD_RELOC_ARM_GLOB_DAT
2824 ENUMX
2825   BFD_RELOC_ARM_GOT32
2826 ENUMX
2827   BFD_RELOC_ARM_PLT32
2828 ENUMX
2829   BFD_RELOC_ARM_RELATIVE
2830 ENUMX
2831   BFD_RELOC_ARM_GOTOFF
2832 ENUMX
2833   BFD_RELOC_ARM_GOTPC
2834 ENUMDOC
2835   Relocations for setting up GOTs and PLTs for shared libraries.
2836
2837 ENUM
2838   BFD_RELOC_ARM_TLS_GD32
2839 ENUMX
2840   BFD_RELOC_ARM_TLS_LDO32
2841 ENUMX
2842   BFD_RELOC_ARM_TLS_LDM32
2843 ENUMX
2844   BFD_RELOC_ARM_TLS_DTPOFF32
2845 ENUMX
2846   BFD_RELOC_ARM_TLS_DTPMOD32
2847 ENUMX
2848   BFD_RELOC_ARM_TLS_TPOFF32
2849 ENUMX
2850   BFD_RELOC_ARM_TLS_IE32
2851 ENUMX
2852   BFD_RELOC_ARM_TLS_LE32
2853 ENUMDOC
2854   ARM thread-local storage relocations.
2855
2856 ENUM
2857   BFD_RELOC_ARM_ALU_PC_G0_NC
2858 ENUMX
2859   BFD_RELOC_ARM_ALU_PC_G0
2860 ENUMX
2861   BFD_RELOC_ARM_ALU_PC_G1_NC
2862 ENUMX
2863   BFD_RELOC_ARM_ALU_PC_G1
2864 ENUMX
2865   BFD_RELOC_ARM_ALU_PC_G2
2866 ENUMX
2867   BFD_RELOC_ARM_LDR_PC_G0
2868 ENUMX
2869   BFD_RELOC_ARM_LDR_PC_G1
2870 ENUMX
2871   BFD_RELOC_ARM_LDR_PC_G2
2872 ENUMX
2873   BFD_RELOC_ARM_LDRS_PC_G0
2874 ENUMX
2875   BFD_RELOC_ARM_LDRS_PC_G1
2876 ENUMX
2877   BFD_RELOC_ARM_LDRS_PC_G2
2878 ENUMX
2879   BFD_RELOC_ARM_LDC_PC_G0
2880 ENUMX
2881   BFD_RELOC_ARM_LDC_PC_G1
2882 ENUMX
2883   BFD_RELOC_ARM_LDC_PC_G2
2884 ENUMX
2885   BFD_RELOC_ARM_ALU_SB_G0_NC
2886 ENUMX
2887   BFD_RELOC_ARM_ALU_SB_G0
2888 ENUMX
2889   BFD_RELOC_ARM_ALU_SB_G1_NC
2890 ENUMX
2891   BFD_RELOC_ARM_ALU_SB_G1
2892 ENUMX
2893   BFD_RELOC_ARM_ALU_SB_G2
2894 ENUMX
2895   BFD_RELOC_ARM_LDR_SB_G0
2896 ENUMX
2897   BFD_RELOC_ARM_LDR_SB_G1
2898 ENUMX
2899   BFD_RELOC_ARM_LDR_SB_G2
2900 ENUMX
2901   BFD_RELOC_ARM_LDRS_SB_G0
2902 ENUMX
2903   BFD_RELOC_ARM_LDRS_SB_G1
2904 ENUMX
2905   BFD_RELOC_ARM_LDRS_SB_G2
2906 ENUMX
2907   BFD_RELOC_ARM_LDC_SB_G0
2908 ENUMX
2909   BFD_RELOC_ARM_LDC_SB_G1
2910 ENUMX
2911   BFD_RELOC_ARM_LDC_SB_G2
2912 ENUMDOC
2913   ARM group relocations.
2914
2915 ENUM
2916   BFD_RELOC_ARM_IMMEDIATE
2917 ENUMX
2918   BFD_RELOC_ARM_ADRL_IMMEDIATE
2919 ENUMX
2920   BFD_RELOC_ARM_T32_IMMEDIATE
2921 ENUMX
2922   BFD_RELOC_ARM_T32_ADD_IMM
2923 ENUMX
2924   BFD_RELOC_ARM_T32_IMM12
2925 ENUMX
2926   BFD_RELOC_ARM_T32_ADD_PC12
2927 ENUMX
2928   BFD_RELOC_ARM_SHIFT_IMM
2929 ENUMX
2930   BFD_RELOC_ARM_SMC
2931 ENUMX
2932   BFD_RELOC_ARM_SWI
2933 ENUMX
2934   BFD_RELOC_ARM_MULTI
2935 ENUMX
2936   BFD_RELOC_ARM_CP_OFF_IMM
2937 ENUMX
2938   BFD_RELOC_ARM_CP_OFF_IMM_S2
2939 ENUMX
2940   BFD_RELOC_ARM_T32_CP_OFF_IMM
2941 ENUMX
2942   BFD_RELOC_ARM_T32_CP_OFF_IMM_S2
2943 ENUMX
2944   BFD_RELOC_ARM_ADR_IMM
2945 ENUMX
2946   BFD_RELOC_ARM_LDR_IMM
2947 ENUMX
2948   BFD_RELOC_ARM_LITERAL
2949 ENUMX
2950   BFD_RELOC_ARM_IN_POOL
2951 ENUMX
2952   BFD_RELOC_ARM_OFFSET_IMM8
2953 ENUMX
2954   BFD_RELOC_ARM_T32_OFFSET_U8
2955 ENUMX
2956   BFD_RELOC_ARM_T32_OFFSET_IMM
2957 ENUMX
2958   BFD_RELOC_ARM_HWLITERAL
2959 ENUMX
2960   BFD_RELOC_ARM_THUMB_ADD
2961 ENUMX
2962   BFD_RELOC_ARM_THUMB_IMM
2963 ENUMX
2964   BFD_RELOC_ARM_THUMB_SHIFT
2965 ENUMDOC
2966   These relocs are only used within the ARM assembler.  They are not
2967   (at present) written to any object files.
2968
2969 ENUM
2970   BFD_RELOC_SH_PCDISP8BY2
2971 ENUMX
2972   BFD_RELOC_SH_PCDISP12BY2
2973 ENUMX
2974   BFD_RELOC_SH_IMM3
2975 ENUMX
2976   BFD_RELOC_SH_IMM3U
2977 ENUMX
2978   BFD_RELOC_SH_DISP12
2979 ENUMX
2980   BFD_RELOC_SH_DISP12BY2
2981 ENUMX
2982   BFD_RELOC_SH_DISP12BY4
2983 ENUMX
2984   BFD_RELOC_SH_DISP12BY8
2985 ENUMX
2986   BFD_RELOC_SH_DISP20
2987 ENUMX
2988   BFD_RELOC_SH_DISP20BY8
2989 ENUMX
2990   BFD_RELOC_SH_IMM4
2991 ENUMX
2992   BFD_RELOC_SH_IMM4BY2
2993 ENUMX
2994   BFD_RELOC_SH_IMM4BY4
2995 ENUMX
2996   BFD_RELOC_SH_IMM8
2997 ENUMX
2998   BFD_RELOC_SH_IMM8BY2
2999 ENUMX
3000   BFD_RELOC_SH_IMM8BY4
3001 ENUMX
3002   BFD_RELOC_SH_PCRELIMM8BY2
3003 ENUMX
3004   BFD_RELOC_SH_PCRELIMM8BY4
3005 ENUMX
3006   BFD_RELOC_SH_SWITCH16
3007 ENUMX
3008   BFD_RELOC_SH_SWITCH32
3009 ENUMX
3010   BFD_RELOC_SH_USES
3011 ENUMX
3012   BFD_RELOC_SH_COUNT
3013 ENUMX
3014   BFD_RELOC_SH_ALIGN
3015 ENUMX
3016   BFD_RELOC_SH_CODE
3017 ENUMX
3018   BFD_RELOC_SH_DATA
3019 ENUMX
3020   BFD_RELOC_SH_LABEL
3021 ENUMX
3022   BFD_RELOC_SH_LOOP_START
3023 ENUMX
3024   BFD_RELOC_SH_LOOP_END
3025 ENUMX
3026   BFD_RELOC_SH_COPY
3027 ENUMX
3028   BFD_RELOC_SH_GLOB_DAT
3029 ENUMX
3030   BFD_RELOC_SH_JMP_SLOT
3031 ENUMX
3032   BFD_RELOC_SH_RELATIVE
3033 ENUMX
3034   BFD_RELOC_SH_GOTPC
3035 ENUMX
3036   BFD_RELOC_SH_GOT_LOW16
3037 ENUMX
3038   BFD_RELOC_SH_GOT_MEDLOW16
3039 ENUMX
3040   BFD_RELOC_SH_GOT_MEDHI16
3041 ENUMX
3042   BFD_RELOC_SH_GOT_HI16
3043 ENUMX
3044   BFD_RELOC_SH_GOTPLT_LOW16
3045 ENUMX
3046   BFD_RELOC_SH_GOTPLT_MEDLOW16
3047 ENUMX
3048   BFD_RELOC_SH_GOTPLT_MEDHI16
3049 ENUMX
3050   BFD_RELOC_SH_GOTPLT_HI16
3051 ENUMX
3052   BFD_RELOC_SH_PLT_LOW16
3053 ENUMX
3054   BFD_RELOC_SH_PLT_MEDLOW16
3055 ENUMX
3056   BFD_RELOC_SH_PLT_MEDHI16
3057 ENUMX
3058   BFD_RELOC_SH_PLT_HI16
3059 ENUMX
3060   BFD_RELOC_SH_GOTOFF_LOW16
3061 ENUMX
3062   BFD_RELOC_SH_GOTOFF_MEDLOW16
3063 ENUMX
3064   BFD_RELOC_SH_GOTOFF_MEDHI16
3065 ENUMX
3066   BFD_RELOC_SH_GOTOFF_HI16
3067 ENUMX
3068   BFD_RELOC_SH_GOTPC_LOW16
3069 ENUMX
3070   BFD_RELOC_SH_GOTPC_MEDLOW16
3071 ENUMX
3072   BFD_RELOC_SH_GOTPC_MEDHI16
3073 ENUMX
3074   BFD_RELOC_SH_GOTPC_HI16
3075 ENUMX
3076   BFD_RELOC_SH_COPY64
3077 ENUMX
3078   BFD_RELOC_SH_GLOB_DAT64
3079 ENUMX
3080   BFD_RELOC_SH_JMP_SLOT64
3081 ENUMX
3082   BFD_RELOC_SH_RELATIVE64
3083 ENUMX
3084   BFD_RELOC_SH_GOT10BY4
3085 ENUMX
3086   BFD_RELOC_SH_GOT10BY8
3087 ENUMX
3088   BFD_RELOC_SH_GOTPLT10BY4
3089 ENUMX
3090   BFD_RELOC_SH_GOTPLT10BY8
3091 ENUMX
3092   BFD_RELOC_SH_GOTPLT32
3093 ENUMX
3094   BFD_RELOC_SH_SHMEDIA_CODE
3095 ENUMX
3096   BFD_RELOC_SH_IMMU5
3097 ENUMX
3098   BFD_RELOC_SH_IMMS6
3099 ENUMX
3100   BFD_RELOC_SH_IMMS6BY32
3101 ENUMX
3102   BFD_RELOC_SH_IMMU6
3103 ENUMX
3104   BFD_RELOC_SH_IMMS10
3105 ENUMX
3106   BFD_RELOC_SH_IMMS10BY2
3107 ENUMX
3108   BFD_RELOC_SH_IMMS10BY4
3109 ENUMX
3110   BFD_RELOC_SH_IMMS10BY8
3111 ENUMX
3112   BFD_RELOC_SH_IMMS16
3113 ENUMX
3114   BFD_RELOC_SH_IMMU16
3115 ENUMX
3116   BFD_RELOC_SH_IMM_LOW16
3117 ENUMX
3118   BFD_RELOC_SH_IMM_LOW16_PCREL
3119 ENUMX
3120   BFD_RELOC_SH_IMM_MEDLOW16
3121 ENUMX
3122   BFD_RELOC_SH_IMM_MEDLOW16_PCREL
3123 ENUMX
3124   BFD_RELOC_SH_IMM_MEDHI16
3125 ENUMX
3126   BFD_RELOC_SH_IMM_MEDHI16_PCREL
3127 ENUMX
3128   BFD_RELOC_SH_IMM_HI16
3129 ENUMX
3130   BFD_RELOC_SH_IMM_HI16_PCREL
3131 ENUMX
3132   BFD_RELOC_SH_PT_16
3133 ENUMX
3134   BFD_RELOC_SH_TLS_GD_32
3135 ENUMX
3136   BFD_RELOC_SH_TLS_LD_32
3137 ENUMX
3138   BFD_RELOC_SH_TLS_LDO_32
3139 ENUMX
3140   BFD_RELOC_SH_TLS_IE_32
3141 ENUMX
3142   BFD_RELOC_SH_TLS_LE_32
3143 ENUMX
3144   BFD_RELOC_SH_TLS_DTPMOD32
3145 ENUMX
3146   BFD_RELOC_SH_TLS_DTPOFF32
3147 ENUMX
3148   BFD_RELOC_SH_TLS_TPOFF32
3149 ENUMDOC
3150   Renesas / SuperH SH relocs.  Not all of these appear in object files.
3151
3152 ENUM
3153   BFD_RELOC_ARC_B22_PCREL
3154 ENUMDOC
3155   ARC Cores relocs.
3156   ARC 22 bit pc-relative branch.  The lowest two bits must be zero and are
3157   not stored in the instruction.  The high 20 bits are installed in bits 26
3158   through 7 of the instruction.
3159 ENUM
3160   BFD_RELOC_ARC_B26
3161 ENUMDOC
3162   ARC 26 bit absolute branch.  The lowest two bits must be zero and are not
3163   stored in the instruction.  The high 24 bits are installed in bits 23
3164   through 0.
3165
3166 ENUM
3167   BFD_RELOC_BFIN_16_IMM
3168 ENUMDOC
3169   ADI Blackfin 16 bit immediate absolute reloc.
3170 ENUM
3171   BFD_RELOC_BFIN_16_HIGH
3172 ENUMDOC
3173   ADI Blackfin 16 bit immediate absolute reloc higher 16 bits.
3174 ENUM
3175   BFD_RELOC_BFIN_4_PCREL
3176 ENUMDOC
3177   ADI Blackfin 'a' part of LSETUP.
3178 ENUM
3179   BFD_RELOC_BFIN_5_PCREL
3180 ENUMDOC
3181   ADI Blackfin.
3182 ENUM
3183   BFD_RELOC_BFIN_16_LOW
3184 ENUMDOC
3185   ADI Blackfin 16 bit immediate absolute reloc lower 16 bits.
3186 ENUM
3187   BFD_RELOC_BFIN_10_PCREL
3188 ENUMDOC
3189   ADI Blackfin.
3190 ENUM
3191   BFD_RELOC_BFIN_11_PCREL
3192 ENUMDOC
3193   ADI Blackfin 'b' part of LSETUP.
3194 ENUM
3195   BFD_RELOC_BFIN_12_PCREL_JUMP
3196 ENUMDOC
3197   ADI Blackfin.
3198 ENUM
3199   BFD_RELOC_BFIN_12_PCREL_JUMP_S
3200 ENUMDOC
3201   ADI Blackfin Short jump, pcrel.
3202 ENUM
3203   BFD_RELOC_BFIN_24_PCREL_CALL_X
3204 ENUMDOC
3205   ADI Blackfin Call.x not implemented.
3206 ENUM
3207   BFD_RELOC_BFIN_24_PCREL_JUMP_L
3208 ENUMDOC
3209   ADI Blackfin Long Jump pcrel.
3210 ENUM
3211   BFD_RELOC_BFIN_GOT17M4
3212 ENUMX
3213   BFD_RELOC_BFIN_GOTHI
3214 ENUMX
3215   BFD_RELOC_BFIN_GOTLO
3216 ENUMX
3217   BFD_RELOC_BFIN_FUNCDESC
3218 ENUMX
3219   BFD_RELOC_BFIN_FUNCDESC_GOT17M4
3220 ENUMX
3221   BFD_RELOC_BFIN_FUNCDESC_GOTHI
3222 ENUMX
3223   BFD_RELOC_BFIN_FUNCDESC_GOTLO
3224 ENUMX
3225   BFD_RELOC_BFIN_FUNCDESC_VALUE
3226 ENUMX
3227   BFD_RELOC_BFIN_FUNCDESC_GOTOFF17M4
3228 ENUMX
3229   BFD_RELOC_BFIN_FUNCDESC_GOTOFFHI
3230 ENUMX
3231   BFD_RELOC_BFIN_FUNCDESC_GOTOFFLO
3232 ENUMX
3233   BFD_RELOC_BFIN_GOTOFF17M4
3234 ENUMX
3235   BFD_RELOC_BFIN_GOTOFFHI
3236 ENUMX
3237   BFD_RELOC_BFIN_GOTOFFLO
3238 ENUMDOC
3239   ADI Blackfin FD-PIC relocations.
3240 ENUM
3241   BFD_RELOC_BFIN_GOT
3242 ENUMDOC
3243   ADI Blackfin GOT relocation.
3244 ENUM
3245   BFD_RELOC_BFIN_PLTPC
3246 ENUMDOC
3247   ADI Blackfin PLTPC relocation.
3248 ENUM
3249   BFD_ARELOC_BFIN_PUSH
3250 ENUMDOC
3251   ADI Blackfin arithmetic relocation.
3252 ENUM
3253   BFD_ARELOC_BFIN_CONST
3254 ENUMDOC
3255   ADI Blackfin arithmetic relocation.
3256 ENUM
3257   BFD_ARELOC_BFIN_ADD
3258 ENUMDOC
3259   ADI Blackfin arithmetic relocation.
3260 ENUM
3261   BFD_ARELOC_BFIN_SUB
3262 ENUMDOC
3263   ADI Blackfin arithmetic relocation.
3264 ENUM
3265   BFD_ARELOC_BFIN_MULT
3266 ENUMDOC
3267   ADI Blackfin arithmetic relocation.
3268 ENUM
3269   BFD_ARELOC_BFIN_DIV
3270 ENUMDOC
3271   ADI Blackfin arithmetic relocation.
3272 ENUM
3273   BFD_ARELOC_BFIN_MOD
3274 ENUMDOC
3275   ADI Blackfin arithmetic relocation.
3276 ENUM
3277   BFD_ARELOC_BFIN_LSHIFT
3278 ENUMDOC
3279   ADI Blackfin arithmetic relocation.
3280 ENUM
3281   BFD_ARELOC_BFIN_RSHIFT
3282 ENUMDOC
3283   ADI Blackfin arithmetic relocation.
3284 ENUM
3285   BFD_ARELOC_BFIN_AND
3286 ENUMDOC
3287   ADI Blackfin arithmetic relocation.
3288 ENUM
3289   BFD_ARELOC_BFIN_OR
3290 ENUMDOC
3291   ADI Blackfin arithmetic relocation.
3292 ENUM
3293   BFD_ARELOC_BFIN_XOR
3294 ENUMDOC
3295   ADI Blackfin arithmetic relocation.
3296 ENUM
3297   BFD_ARELOC_BFIN_LAND
3298 ENUMDOC
3299   ADI Blackfin arithmetic relocation.
3300 ENUM
3301   BFD_ARELOC_BFIN_LOR
3302 ENUMDOC
3303   ADI Blackfin arithmetic relocation.
3304 ENUM
3305   BFD_ARELOC_BFIN_LEN
3306 ENUMDOC
3307   ADI Blackfin arithmetic relocation.
3308 ENUM
3309   BFD_ARELOC_BFIN_NEG
3310 ENUMDOC
3311   ADI Blackfin arithmetic relocation.
3312 ENUM
3313   BFD_ARELOC_BFIN_COMP
3314 ENUMDOC
3315   ADI Blackfin arithmetic relocation.
3316 ENUM
3317   BFD_ARELOC_BFIN_PAGE
3318 ENUMDOC
3319   ADI Blackfin arithmetic relocation.
3320 ENUM
3321   BFD_ARELOC_BFIN_HWPAGE
3322 ENUMDOC
3323   ADI Blackfin arithmetic relocation.
3324 ENUM
3325   BFD_ARELOC_BFIN_ADDR
3326 ENUMDOC
3327   ADI Blackfin arithmetic relocation.
3328
3329 ENUM
3330   BFD_RELOC_D10V_10_PCREL_R
3331 ENUMDOC
3332   Mitsubishi D10V relocs.
3333   This is a 10-bit reloc with the right 2 bits
3334   assumed to be 0.
3335 ENUM
3336   BFD_RELOC_D10V_10_PCREL_L
3337 ENUMDOC
3338   Mitsubishi D10V relocs.
3339   This is a 10-bit reloc with the right 2 bits
3340   assumed to be 0.  This is the same as the previous reloc
3341   except it is in the left container, i.e.,
3342   shifted left 15 bits.
3343 ENUM
3344   BFD_RELOC_D10V_18
3345 ENUMDOC
3346   This is an 18-bit reloc with the right 2 bits
3347   assumed to be 0.
3348 ENUM
3349   BFD_RELOC_D10V_18_PCREL
3350 ENUMDOC
3351   This is an 18-bit reloc with the right 2 bits
3352   assumed to be 0.
3353
3354 ENUM
3355   BFD_RELOC_D30V_6
3356 ENUMDOC
3357   Mitsubishi D30V relocs.
3358   This is a 6-bit absolute reloc.
3359 ENUM
3360   BFD_RELOC_D30V_9_PCREL
3361 ENUMDOC
3362   This is a 6-bit pc-relative reloc with
3363   the right 3 bits assumed to be 0.
3364 ENUM
3365   BFD_RELOC_D30V_9_PCREL_R
3366 ENUMDOC
3367   This is a 6-bit pc-relative reloc with
3368   the right 3 bits assumed to be 0. Same
3369   as the previous reloc but on the right side
3370   of the container.
3371 ENUM
3372   BFD_RELOC_D30V_15
3373 ENUMDOC
3374   This is a 12-bit absolute reloc with the
3375   right 3 bitsassumed to be 0.
3376 ENUM
3377   BFD_RELOC_D30V_15_PCREL
3378 ENUMDOC
3379   This is a 12-bit pc-relative reloc with
3380   the right 3 bits assumed to be 0.
3381 ENUM
3382   BFD_RELOC_D30V_15_PCREL_R
3383 ENUMDOC
3384   This is a 12-bit pc-relative reloc with
3385   the right 3 bits assumed to be 0. Same
3386   as the previous reloc but on the right side
3387   of the container.
3388 ENUM
3389   BFD_RELOC_D30V_21
3390 ENUMDOC
3391   This is an 18-bit absolute reloc with
3392   the right 3 bits assumed to be 0.
3393 ENUM
3394   BFD_RELOC_D30V_21_PCREL
3395 ENUMDOC
3396   This is an 18-bit pc-relative reloc with
3397   the right 3 bits assumed to be 0.
3398 ENUM
3399   BFD_RELOC_D30V_21_PCREL_R
3400 ENUMDOC
3401   This is an 18-bit pc-relative reloc with
3402   the right 3 bits assumed to be 0. Same
3403   as the previous reloc but on the right side
3404   of the container.
3405 ENUM
3406   BFD_RELOC_D30V_32
3407 ENUMDOC
3408   This is a 32-bit absolute reloc.
3409 ENUM
3410   BFD_RELOC_D30V_32_PCREL
3411 ENUMDOC
3412   This is a 32-bit pc-relative reloc.
3413
3414 ENUM
3415   BFD_RELOC_DLX_HI16_S
3416 ENUMDOC
3417   DLX relocs
3418 ENUM
3419   BFD_RELOC_DLX_LO16
3420 ENUMDOC
3421   DLX relocs
3422 ENUM
3423   BFD_RELOC_DLX_JMP26
3424 ENUMDOC
3425   DLX relocs
3426
3427 ENUM
3428   BFD_RELOC_M32C_HI8
3429 ENUMX
3430   BFD_RELOC_M32C_RL_JUMP
3431 ENUMX
3432   BFD_RELOC_M32C_RL_1ADDR
3433 ENUMX
3434   BFD_RELOC_M32C_RL_2ADDR
3435 ENUMDOC
3436   Renesas M16C/M32C Relocations.
3437
3438 ENUM
3439   BFD_RELOC_M32R_24
3440 ENUMDOC
3441   Renesas M32R (formerly Mitsubishi M32R) relocs.
3442   This is a 24 bit absolute address.
3443 ENUM
3444   BFD_RELOC_M32R_10_PCREL
3445 ENUMDOC
3446   This is a 10-bit pc-relative reloc with the right 2 bits assumed to be 0.
3447 ENUM
3448   BFD_RELOC_M32R_18_PCREL
3449 ENUMDOC
3450   This is an 18-bit reloc with the right 2 bits assumed to be 0.
3451 ENUM
3452   BFD_RELOC_M32R_26_PCREL
3453 ENUMDOC
3454   This is a 26-bit reloc with the right 2 bits assumed to be 0.
3455 ENUM
3456   BFD_RELOC_M32R_HI16_ULO
3457 ENUMDOC
3458   This is a 16-bit reloc containing the high 16 bits of an address
3459   used when the lower 16 bits are treated as unsigned.
3460 ENUM
3461   BFD_RELOC_M32R_HI16_SLO
3462 ENUMDOC
3463   This is a 16-bit reloc containing the high 16 bits of an address
3464   used when the lower 16 bits are treated as signed.
3465 ENUM
3466   BFD_RELOC_M32R_LO16
3467 ENUMDOC
3468   This is a 16-bit reloc containing the lower 16 bits of an address.
3469 ENUM
3470   BFD_RELOC_M32R_SDA16
3471 ENUMDOC
3472   This is a 16-bit reloc containing the small data area offset for use in
3473   add3, load, and store instructions.
3474 ENUM
3475   BFD_RELOC_M32R_GOT24
3476 ENUMX
3477   BFD_RELOC_M32R_26_PLTREL
3478 ENUMX
3479   BFD_RELOC_M32R_COPY
3480 ENUMX
3481   BFD_RELOC_M32R_GLOB_DAT
3482 ENUMX
3483   BFD_RELOC_M32R_JMP_SLOT
3484 ENUMX
3485   BFD_RELOC_M32R_RELATIVE
3486 ENUMX
3487   BFD_RELOC_M32R_GOTOFF
3488 ENUMX
3489   BFD_RELOC_M32R_GOTOFF_HI_ULO
3490 ENUMX
3491   BFD_RELOC_M32R_GOTOFF_HI_SLO
3492 ENUMX
3493   BFD_RELOC_M32R_GOTOFF_LO
3494 ENUMX
3495   BFD_RELOC_M32R_GOTPC24
3496 ENUMX
3497   BFD_RELOC_M32R_GOT16_HI_ULO
3498 ENUMX
3499   BFD_RELOC_M32R_GOT16_HI_SLO
3500 ENUMX
3501   BFD_RELOC_M32R_GOT16_LO
3502 ENUMX
3503   BFD_RELOC_M32R_GOTPC_HI_ULO
3504 ENUMX
3505   BFD_RELOC_M32R_GOTPC_HI_SLO
3506 ENUMX
3507   BFD_RELOC_M32R_GOTPC_LO
3508 ENUMDOC
3509   For PIC.
3510
3511
3512 ENUM
3513   BFD_RELOC_V850_9_PCREL
3514 ENUMDOC
3515   This is a 9-bit reloc
3516 ENUM
3517   BFD_RELOC_V850_22_PCREL
3518 ENUMDOC
3519   This is a 22-bit reloc
3520
3521 ENUM
3522   BFD_RELOC_V850_SDA_16_16_OFFSET
3523 ENUMDOC
3524   This is a 16 bit offset from the short data area pointer.
3525 ENUM
3526   BFD_RELOC_V850_SDA_15_16_OFFSET
3527 ENUMDOC
3528   This is a 16 bit offset (of which only 15 bits are used) from the
3529   short data area pointer.
3530 ENUM
3531   BFD_RELOC_V850_ZDA_16_16_OFFSET
3532 ENUMDOC
3533   This is a 16 bit offset from the zero data area pointer.
3534 ENUM
3535   BFD_RELOC_V850_ZDA_15_16_OFFSET
3536 ENUMDOC
3537   This is a 16 bit offset (of which only 15 bits are used) from the
3538   zero data area pointer.
3539 ENUM
3540   BFD_RELOC_V850_TDA_6_8_OFFSET
3541 ENUMDOC
3542   This is an 8 bit offset (of which only 6 bits are used) from the
3543   tiny data area pointer.
3544 ENUM
3545   BFD_RELOC_V850_TDA_7_8_OFFSET
3546 ENUMDOC
3547   This is an 8bit offset (of which only 7 bits are used) from the tiny
3548   data area pointer.
3549 ENUM
3550   BFD_RELOC_V850_TDA_7_7_OFFSET
3551 ENUMDOC
3552   This is a 7 bit offset from the tiny data area pointer.
3553 ENUM
3554   BFD_RELOC_V850_TDA_16_16_OFFSET
3555 ENUMDOC
3556   This is a 16 bit offset from the tiny data area pointer.
3557 COMMENT
3558 ENUM
3559   BFD_RELOC_V850_TDA_4_5_OFFSET
3560 ENUMDOC
3561   This is a 5 bit offset (of which only 4 bits are used) from the tiny
3562   data area pointer.
3563 ENUM
3564   BFD_RELOC_V850_TDA_4_4_OFFSET
3565 ENUMDOC
3566   This is a 4 bit offset from the tiny data area pointer.
3567 ENUM
3568   BFD_RELOC_V850_SDA_16_16_SPLIT_OFFSET
3569 ENUMDOC
3570   This is a 16 bit offset from the short data area pointer, with the
3571   bits placed non-contiguously in the instruction.
3572 ENUM
3573   BFD_RELOC_V850_ZDA_16_16_SPLIT_OFFSET
3574 ENUMDOC
3575   This is a 16 bit offset from the zero data area pointer, with the
3576   bits placed non-contiguously in the instruction.
3577 ENUM
3578   BFD_RELOC_V850_CALLT_6_7_OFFSET
3579 ENUMDOC
3580   This is a 6 bit offset from the call table base pointer.
3581 ENUM
3582   BFD_RELOC_V850_CALLT_16_16_OFFSET
3583 ENUMDOC
3584   This is a 16 bit offset from the call table base pointer.
3585 ENUM
3586   BFD_RELOC_V850_LONGCALL
3587 ENUMDOC
3588   Used for relaxing indirect function calls.
3589 ENUM
3590   BFD_RELOC_V850_LONGJUMP
3591 ENUMDOC
3592   Used for relaxing indirect jumps.
3593 ENUM
3594   BFD_RELOC_V850_ALIGN
3595 ENUMDOC
3596   Used to maintain alignment whilst relaxing.
3597 ENUM
3598   BFD_RELOC_V850_LO16_SPLIT_OFFSET
3599 ENUMDOC
3600   This is a variation of BFD_RELOC_LO16 that can be used in v850e ld.bu
3601   instructions.
3602 ENUM
3603   BFD_RELOC_MN10300_32_PCREL
3604 ENUMDOC
3605   This is a 32bit pcrel reloc for the mn10300, offset by two bytes in the
3606   instruction.
3607 ENUM
3608   BFD_RELOC_MN10300_16_PCREL
3609 ENUMDOC
3610   This is a 16bit pcrel reloc for the mn10300, offset by two bytes in the
3611   instruction.
3612
3613 ENUM
3614   BFD_RELOC_TIC30_LDP
3615 ENUMDOC
3616   This is a 8bit DP reloc for the tms320c30, where the most
3617   significant 8 bits of a 24 bit word are placed into the least
3618   significant 8 bits of the opcode.
3619
3620 ENUM
3621   BFD_RELOC_TIC54X_PARTLS7
3622 ENUMDOC
3623   This is a 7bit reloc for the tms320c54x, where the least
3624   significant 7 bits of a 16 bit word are placed into the least
3625   significant 7 bits of the opcode.
3626
3627 ENUM
3628   BFD_RELOC_TIC54X_PARTMS9
3629 ENUMDOC
3630   This is a 9bit DP reloc for the tms320c54x, where the most
3631   significant 9 bits of a 16 bit word are placed into the least
3632   significant 9 bits of the opcode.
3633
3634 ENUM
3635   BFD_RELOC_TIC54X_23
3636 ENUMDOC
3637   This is an extended address 23-bit reloc for the tms320c54x.
3638
3639 ENUM
3640   BFD_RELOC_TIC54X_16_OF_23
3641 ENUMDOC
3642   This is a 16-bit reloc for the tms320c54x, where the least
3643   significant 16 bits of a 23-bit extended address are placed into
3644   the opcode.
3645
3646 ENUM
3647   BFD_RELOC_TIC54X_MS7_OF_23
3648 ENUMDOC
3649   This is a reloc for the tms320c54x, where the most
3650   significant 7 bits of a 23-bit extended address are placed into
3651   the opcode.
3652
3653 ENUM
3654   BFD_RELOC_FR30_48
3655 ENUMDOC
3656   This is a 48 bit reloc for the FR30 that stores 32 bits.
3657 ENUM
3658   BFD_RELOC_FR30_20
3659 ENUMDOC
3660   This is a 32 bit reloc for the FR30 that stores 20 bits split up into
3661   two sections.
3662 ENUM
3663   BFD_RELOC_FR30_6_IN_4
3664 ENUMDOC
3665   This is a 16 bit reloc for the FR30 that stores a 6 bit word offset in
3666   4 bits.
3667 ENUM
3668   BFD_RELOC_FR30_8_IN_8
3669 ENUMDOC
3670   This is a 16 bit reloc for the FR30 that stores an 8 bit byte offset
3671   into 8 bits.
3672 ENUM
3673   BFD_RELOC_FR30_9_IN_8
3674 ENUMDOC
3675   This is a 16 bit reloc for the FR30 that stores a 9 bit short offset
3676   into 8 bits.
3677 ENUM
3678   BFD_RELOC_FR30_10_IN_8
3679 ENUMDOC
3680   This is a 16 bit reloc for the FR30 that stores a 10 bit word offset
3681   into 8 bits.
3682 ENUM
3683   BFD_RELOC_FR30_9_PCREL
3684 ENUMDOC
3685   This is a 16 bit reloc for the FR30 that stores a 9 bit pc relative
3686   short offset into 8 bits.
3687 ENUM
3688   BFD_RELOC_FR30_12_PCREL
3689 ENUMDOC
3690   This is a 16 bit reloc for the FR30 that stores a 12 bit pc relative
3691   short offset into 11 bits.
3692
3693 ENUM
3694   BFD_RELOC_MCORE_PCREL_IMM8BY4
3695 ENUMX
3696   BFD_RELOC_MCORE_PCREL_IMM11BY2
3697 ENUMX
3698   BFD_RELOC_MCORE_PCREL_IMM4BY2
3699 ENUMX
3700   BFD_RELOC_MCORE_PCREL_32
3701 ENUMX
3702   BFD_RELOC_MCORE_PCREL_JSR_IMM11BY2
3703 ENUMX
3704   BFD_RELOC_MCORE_RVA
3705 ENUMDOC
3706   Motorola Mcore relocations.
3707
3708 ENUM
3709   BFD_RELOC_MEP_8
3710 ENUMX
3711   BFD_RELOC_MEP_16
3712 ENUMX
3713   BFD_RELOC_MEP_32
3714 ENUMX
3715   BFD_RELOC_MEP_PCREL8A2
3716 ENUMX
3717   BFD_RELOC_MEP_PCREL12A2
3718 ENUMX
3719   BFD_RELOC_MEP_PCREL17A2
3720 ENUMX
3721   BFD_RELOC_MEP_PCREL24A2
3722 ENUMX
3723   BFD_RELOC_MEP_PCABS24A2
3724 ENUMX
3725   BFD_RELOC_MEP_LOW16
3726 ENUMX
3727   BFD_RELOC_MEP_HI16U
3728 ENUMX
3729   BFD_RELOC_MEP_HI16S
3730 ENUMX
3731   BFD_RELOC_MEP_GPREL
3732 ENUMX
3733   BFD_RELOC_MEP_TPREL
3734 ENUMX
3735   BFD_RELOC_MEP_TPREL7
3736 ENUMX
3737   BFD_RELOC_MEP_TPREL7A2
3738 ENUMX
3739   BFD_RELOC_MEP_TPREL7A4
3740 ENUMX
3741   BFD_RELOC_MEP_UIMM24
3742 ENUMX
3743   BFD_RELOC_MEP_ADDR24A4
3744 ENUMX
3745   BFD_RELOC_MEP_GNU_VTINHERIT
3746 ENUMX
3747   BFD_RELOC_MEP_GNU_VTENTRY
3748 ENUMDOC
3749   Toshiba Media Processor Relocations.
3750 COMMENT
3751
3752 ENUM
3753   BFD_RELOC_MMIX_GETA
3754 ENUMX
3755   BFD_RELOC_MMIX_GETA_1
3756 ENUMX
3757   BFD_RELOC_MMIX_GETA_2
3758 ENUMX
3759   BFD_RELOC_MMIX_GETA_3
3760 ENUMDOC
3761   These are relocations for the GETA instruction.
3762 ENUM
3763   BFD_RELOC_MMIX_CBRANCH
3764 ENUMX
3765   BFD_RELOC_MMIX_CBRANCH_J
3766 ENUMX
3767   BFD_RELOC_MMIX_CBRANCH_1
3768 ENUMX
3769   BFD_RELOC_MMIX_CBRANCH_2
3770 ENUMX
3771   BFD_RELOC_MMIX_CBRANCH_3
3772 ENUMDOC
3773   These are relocations for a conditional branch instruction.
3774 ENUM
3775   BFD_RELOC_MMIX_PUSHJ
3776 ENUMX
3777   BFD_RELOC_MMIX_PUSHJ_1
3778 ENUMX
3779   BFD_RELOC_MMIX_PUSHJ_2
3780 ENUMX
3781   BFD_RELOC_MMIX_PUSHJ_3
3782 ENUMX
3783   BFD_RELOC_MMIX_PUSHJ_STUBBABLE
3784 ENUMDOC
3785   These are relocations for the PUSHJ instruction.
3786 ENUM
3787   BFD_RELOC_MMIX_JMP
3788 ENUMX
3789   BFD_RELOC_MMIX_JMP_1
3790 ENUMX
3791   BFD_RELOC_MMIX_JMP_2
3792 ENUMX
3793   BFD_RELOC_MMIX_JMP_3
3794 ENUMDOC
3795   These are relocations for the JMP instruction.
3796 ENUM
3797   BFD_RELOC_MMIX_ADDR19
3798 ENUMDOC
3799   This is a relocation for a relative address as in a GETA instruction or
3800   a branch.
3801 ENUM
3802   BFD_RELOC_MMIX_ADDR27
3803 ENUMDOC
3804   This is a relocation for a relative address as in a JMP instruction.
3805 ENUM
3806   BFD_RELOC_MMIX_REG_OR_BYTE
3807 ENUMDOC
3808   This is a relocation for an instruction field that may be a general
3809   register or a value 0..255.
3810 ENUM
3811   BFD_RELOC_MMIX_REG
3812 ENUMDOC
3813   This is a relocation for an instruction field that may be a general
3814   register.
3815 ENUM
3816   BFD_RELOC_MMIX_BASE_PLUS_OFFSET
3817 ENUMDOC
3818   This is a relocation for two instruction fields holding a register and
3819   an offset, the equivalent of the relocation.
3820 ENUM
3821   BFD_RELOC_MMIX_LOCAL
3822 ENUMDOC
3823   This relocation is an assertion that the expression is not allocated as
3824   a global register.  It does not modify contents.
3825
3826 ENUM
3827   BFD_RELOC_AVR_7_PCREL
3828 ENUMDOC
3829   This is a 16 bit reloc for the AVR that stores 8 bit pc relative
3830   short offset into 7 bits.
3831 ENUM
3832   BFD_RELOC_AVR_13_PCREL
3833 ENUMDOC
3834   This is a 16 bit reloc for the AVR that stores 13 bit pc relative
3835   short offset into 12 bits.
3836 ENUM
3837   BFD_RELOC_AVR_16_PM
3838 ENUMDOC
3839   This is a 16 bit reloc for the AVR that stores 17 bit value (usually
3840   program memory address) into 16 bits.
3841 ENUM
3842   BFD_RELOC_AVR_LO8_LDI
3843 ENUMDOC
3844   This is a 16 bit reloc for the AVR that stores 8 bit value (usually
3845   data memory address) into 8 bit immediate value of LDI insn.
3846 ENUM
3847   BFD_RELOC_AVR_HI8_LDI
3848 ENUMDOC
3849   This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit
3850   of data memory address) into 8 bit immediate value of LDI insn.
3851 ENUM
3852   BFD_RELOC_AVR_HH8_LDI
3853 ENUMDOC
3854   This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit
3855   of program memory address) into 8 bit immediate value of LDI insn.
3856 ENUM
3857   BFD_RELOC_AVR_MS8_LDI
3858 ENUMDOC
3859   This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit
3860   of 32 bit value) into 8 bit immediate value of LDI insn.
3861 ENUM
3862   BFD_RELOC_AVR_LO8_LDI_NEG
3863 ENUMDOC
3864   This is a 16 bit reloc for the AVR that stores negated 8 bit value
3865   (usually data memory address) into 8 bit immediate value of SUBI insn.
3866 ENUM
3867   BFD_RELOC_AVR_HI8_LDI_NEG
3868 ENUMDOC
3869   This is a 16 bit reloc for the AVR that stores negated 8 bit value
3870   (high 8 bit of data memory address) into 8 bit immediate value of
3871   SUBI insn.
3872 ENUM
3873   BFD_RELOC_AVR_HH8_LDI_NEG
3874 ENUMDOC
3875   This is a 16 bit reloc for the AVR that stores negated 8 bit value
3876   (most high 8 bit of program memory address) into 8 bit immediate value
3877   of LDI or SUBI insn.
3878 ENUM
3879   BFD_RELOC_AVR_MS8_LDI_NEG
3880 ENUMDOC
3881   This is a 16 bit reloc for the AVR that stores negated 8 bit value (msb
3882   of 32 bit value) into 8 bit immediate value of LDI insn.
3883 ENUM
3884   BFD_RELOC_AVR_LO8_LDI_PM
3885 ENUMDOC
3886   This is a 16 bit reloc for the AVR that stores 8 bit value (usually
3887   command address) into 8 bit immediate value of LDI insn.
3888 ENUM
3889   BFD_RELOC_AVR_LO8_LDI_GS
3890 ENUMDOC
3891   This is a 16 bit reloc for the AVR that stores 8 bit value
3892   (command address) into 8 bit immediate value of LDI insn. If the address
3893   is beyond the 128k boundary, the linker inserts a jump stub for this reloc
3894   in the lower 128k.
3895 ENUM
3896   BFD_RELOC_AVR_HI8_LDI_PM
3897 ENUMDOC
3898   This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit
3899   of command address) into 8 bit immediate value of LDI insn.
3900 ENUM
3901   BFD_RELOC_AVR_HI8_LDI_GS
3902 ENUMDOC
3903   This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit
3904   of command address) into 8 bit immediate value of LDI insn.  If the address
3905   is beyond the 128k boundary, the linker inserts a jump stub for this reloc
3906   below 128k.
3907 ENUM
3908   BFD_RELOC_AVR_HH8_LDI_PM
3909 ENUMDOC
3910   This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit
3911   of command address) into 8 bit immediate value of LDI insn.
3912 ENUM
3913   BFD_RELOC_AVR_LO8_LDI_PM_NEG
3914 ENUMDOC
3915   This is a 16 bit reloc for the AVR that stores negated 8 bit value
3916   (usually command address) into 8 bit immediate value of SUBI insn.
3917 ENUM
3918   BFD_RELOC_AVR_HI8_LDI_PM_NEG
3919 ENUMDOC
3920   This is a 16 bit reloc for the AVR that stores negated 8 bit value
3921   (high 8 bit of 16 bit command address) into 8 bit immediate value
3922   of SUBI insn.
3923 ENUM
3924   BFD_RELOC_AVR_HH8_LDI_PM_NEG
3925 ENUMDOC
3926   This is a 16 bit reloc for the AVR that stores negated 8 bit value
3927   (high 6 bit of 22 bit command address) into 8 bit immediate
3928   value of SUBI insn.
3929 ENUM
3930   BFD_RELOC_AVR_CALL
3931 ENUMDOC
3932   This is a 32 bit reloc for the AVR that stores 23 bit value
3933   into 22 bits.
3934 ENUM
3935   BFD_RELOC_AVR_LDI
3936 ENUMDOC
3937   This is a 16 bit reloc for the AVR that stores all needed bits
3938   for absolute addressing with ldi with overflow check to linktime
3939 ENUM
3940   BFD_RELOC_AVR_6
3941 ENUMDOC
3942   This is a 6 bit reloc for the AVR that stores offset for ldd/std
3943   instructions
3944 ENUM
3945   BFD_RELOC_AVR_6_ADIW
3946 ENUMDOC
3947   This is a 6 bit reloc for the AVR that stores offset for adiw/sbiw
3948   instructions
3949
3950 ENUM
3951   BFD_RELOC_390_12
3952 ENUMDOC
3953    Direct 12 bit.
3954 ENUM
3955   BFD_RELOC_390_GOT12
3956 ENUMDOC
3957   12 bit GOT offset.
3958 ENUM
3959   BFD_RELOC_390_PLT32
3960 ENUMDOC
3961   32 bit PC relative PLT address.
3962 ENUM
3963   BFD_RELOC_390_COPY
3964 ENUMDOC
3965   Copy symbol at runtime.
3966 ENUM
3967   BFD_RELOC_390_GLOB_DAT
3968 ENUMDOC
3969   Create GOT entry.
3970 ENUM
3971   BFD_RELOC_390_JMP_SLOT
3972 ENUMDOC
3973   Create PLT entry.
3974 ENUM
3975   BFD_RELOC_390_RELATIVE
3976 ENUMDOC
3977   Adjust by program base.
3978 ENUM
3979   BFD_RELOC_390_GOTPC
3980 ENUMDOC
3981   32 bit PC relative offset to GOT.
3982 ENUM
3983   BFD_RELOC_390_GOT16
3984 ENUMDOC
3985   16 bit GOT offset.
3986 ENUM
3987   BFD_RELOC_390_PC16DBL
3988 ENUMDOC
3989   PC relative 16 bit shifted by 1.
3990 ENUM
3991   BFD_RELOC_390_PLT16DBL
3992 ENUMDOC
3993   16 bit PC rel. PLT shifted by 1.
3994 ENUM
3995   BFD_RELOC_390_PC32DBL
3996 ENUMDOC
3997   PC relative 32 bit shifted by 1.
3998 ENUM
3999   BFD_RELOC_390_PLT32DBL
4000 ENUMDOC
4001   32 bit PC rel. PLT shifted by 1.
4002 ENUM
4003   BFD_RELOC_390_GOTPCDBL
4004 ENUMDOC
4005   32 bit PC rel. GOT shifted by 1.
4006 ENUM
4007   BFD_RELOC_390_GOT64
4008 ENUMDOC
4009   64 bit GOT offset.
4010 ENUM
4011   BFD_RELOC_390_PLT64
4012 ENUMDOC
4013   64 bit PC relative PLT address.
4014 ENUM
4015   BFD_RELOC_390_GOTENT
4016 ENUMDOC
4017   32 bit rel. offset to GOT entry.
4018 ENUM
4019   BFD_RELOC_390_GOTOFF64
4020 ENUMDOC
4021   64 bit offset to GOT.
4022 ENUM
4023   BFD_RELOC_390_GOTPLT12
4024 ENUMDOC
4025   12-bit offset to symbol-entry within GOT, with PLT handling.
4026 ENUM
4027   BFD_RELOC_390_GOTPLT16
4028 ENUMDOC
4029   16-bit offset to symbol-entry within GOT, with PLT handling.
4030 ENUM
4031   BFD_RELOC_390_GOTPLT32
4032 ENUMDOC
4033   32-bit offset to symbol-entry within GOT, with PLT handling.
4034 ENUM
4035   BFD_RELOC_390_GOTPLT64
4036 ENUMDOC
4037   64-bit offset to symbol-entry within GOT, with PLT handling.
4038 ENUM
4039   BFD_RELOC_390_GOTPLTENT
4040 ENUMDOC
4041   32-bit rel. offset to symbol-entry within GOT, with PLT handling.
4042 ENUM
4043   BFD_RELOC_390_PLTOFF16
4044 ENUMDOC
4045   16-bit rel. offset from the GOT to a PLT entry.
4046 ENUM
4047   BFD_RELOC_390_PLTOFF32
4048 ENUMDOC
4049   32-bit rel. offset from the GOT to a PLT entry.
4050 ENUM
4051   BFD_RELOC_390_PLTOFF64
4052 ENUMDOC
4053   64-bit rel. offset from the GOT to a PLT entry.
4054
4055 ENUM
4056   BFD_RELOC_390_TLS_LOAD
4057 ENUMX
4058   BFD_RELOC_390_TLS_GDCALL
4059 ENUMX
4060   BFD_RELOC_390_TLS_LDCALL
4061 ENUMX
4062   BFD_RELOC_390_TLS_GD32
4063 ENUMX
4064   BFD_RELOC_390_TLS_GD64
4065 ENUMX
4066   BFD_RELOC_390_TLS_GOTIE12
4067 ENUMX
4068   BFD_RELOC_390_TLS_GOTIE32
4069 ENUMX
4070   BFD_RELOC_390_TLS_GOTIE64
4071 ENUMX
4072   BFD_RELOC_390_TLS_LDM32
4073 ENUMX
4074   BFD_RELOC_390_TLS_LDM64
4075 ENUMX
4076   BFD_RELOC_390_TLS_IE32
4077 ENUMX
4078   BFD_RELOC_390_TLS_IE64
4079 ENUMX
4080   BFD_RELOC_390_TLS_IEENT
4081 ENUMX
4082   BFD_RELOC_390_TLS_LE32
4083 ENUMX
4084   BFD_RELOC_390_TLS_LE64
4085 ENUMX
4086   BFD_RELOC_390_TLS_LDO32
4087 ENUMX
4088   BFD_RELOC_390_TLS_LDO64
4089 ENUMX
4090   BFD_RELOC_390_TLS_DTPMOD
4091 ENUMX
4092   BFD_RELOC_390_TLS_DTPOFF
4093 ENUMX
4094   BFD_RELOC_390_TLS_TPOFF
4095 ENUMDOC
4096   s390 tls relocations.
4097
4098 ENUM
4099   BFD_RELOC_390_20
4100 ENUMX
4101   BFD_RELOC_390_GOT20
4102 ENUMX
4103   BFD_RELOC_390_GOTPLT20
4104 ENUMX
4105   BFD_RELOC_390_TLS_GOTIE20
4106 ENUMDOC
4107   Long displacement extension.
4108
4109 ENUM
4110   BFD_RELOC_SCORE_DUMMY1
4111 ENUMDOC
4112   Score relocations
4113 ENUM
4114   BFD_RELOC_SCORE_GPREL15
4115 ENUMDOC
4116   Low 16 bit for load/store
4117 ENUM
4118   BFD_RELOC_SCORE_DUMMY2
4119 ENUMX
4120   BFD_RELOC_SCORE_JMP
4121 ENUMDOC
4122   This is a 24-bit reloc with the right 1 bit assumed to be 0
4123 ENUM
4124   BFD_RELOC_SCORE_BRANCH
4125 ENUMDOC
4126   This is a 19-bit reloc with the right 1 bit assumed to be 0
4127 ENUM
4128   BFD_RELOC_SCORE16_JMP
4129 ENUMDOC
4130   This is a 11-bit reloc with the right 1 bit assumed to be 0
4131 ENUM
4132   BFD_RELOC_SCORE16_BRANCH
4133 ENUMDOC
4134   This is a 8-bit reloc with the right 1 bit assumed to be 0
4135 ENUM
4136   BFD_RELOC_SCORE_GOT15
4137 ENUMX
4138   BFD_RELOC_SCORE_GOT_LO16
4139 ENUMX
4140   BFD_RELOC_SCORE_CALL15
4141 ENUMX
4142   BFD_RELOC_SCORE_DUMMY_HI16
4143 ENUMDOC
4144   Undocumented Score relocs
4145
4146 ENUM
4147   BFD_RELOC_IP2K_FR9
4148 ENUMDOC
4149   Scenix IP2K - 9-bit register number / data address
4150 ENUM
4151   BFD_RELOC_IP2K_BANK
4152 ENUMDOC
4153   Scenix IP2K - 4-bit register/data bank number
4154 ENUM
4155   BFD_RELOC_IP2K_ADDR16CJP
4156 ENUMDOC
4157   Scenix IP2K - low 13 bits of instruction word address
4158 ENUM
4159   BFD_RELOC_IP2K_PAGE3
4160 ENUMDOC
4161   Scenix IP2K - high 3 bits of instruction word address
4162 ENUM
4163   BFD_RELOC_IP2K_LO8DATA
4164 ENUMX
4165   BFD_RELOC_IP2K_HI8DATA
4166 ENUMX
4167   BFD_RELOC_IP2K_EX8DATA
4168 ENUMDOC
4169   Scenix IP2K - ext/low/high 8 bits of data address
4170 ENUM
4171   BFD_RELOC_IP2K_LO8INSN
4172 ENUMX
4173   BFD_RELOC_IP2K_HI8INSN
4174 ENUMDOC
4175   Scenix IP2K - low/high 8 bits of instruction word address
4176 ENUM
4177   BFD_RELOC_IP2K_PC_SKIP
4178 ENUMDOC
4179   Scenix IP2K - even/odd PC modifier to modify snb pcl.0
4180 ENUM
4181   BFD_RELOC_IP2K_TEXT
4182 ENUMDOC
4183   Scenix IP2K - 16 bit word address in text section.
4184 ENUM
4185   BFD_RELOC_IP2K_FR_OFFSET
4186 ENUMDOC
4187   Scenix IP2K - 7-bit sp or dp offset
4188 ENUM
4189   BFD_RELOC_VPE4KMATH_DATA
4190 ENUMX
4191   BFD_RELOC_VPE4KMATH_INSN
4192 ENUMDOC
4193   Scenix VPE4K coprocessor - data/insn-space addressing
4194
4195 ENUM
4196   BFD_RELOC_VTABLE_INHERIT
4197 ENUMX
4198   BFD_RELOC_VTABLE_ENTRY
4199 ENUMDOC
4200   These two relocations are used by the linker to determine which of
4201   the entries in a C++ virtual function table are actually used.  When
4202   the --gc-sections option is given, the linker will zero out the entries
4203   that are not used, so that the code for those functions need not be
4204   included in the output.
4205
4206   VTABLE_INHERIT is a zero-space relocation used to describe to the
4207   linker the inheritance tree of a C++ virtual function table.  The
4208   relocation's symbol should be the parent class' vtable, and the
4209   relocation should be located at the child vtable.
4210
4211   VTABLE_ENTRY is a zero-space relocation that describes the use of a
4212   virtual function table entry.  The reloc's symbol should refer to the
4213   table of the class mentioned in the code.  Off of that base, an offset
4214   describes the entry that is being used.  For Rela hosts, this offset
4215   is stored in the reloc's addend.  For Rel hosts, we are forced to put
4216   this offset in the reloc's section offset.
4217
4218 ENUM
4219   BFD_RELOC_IA64_IMM14
4220 ENUMX
4221   BFD_RELOC_IA64_IMM22
4222 ENUMX
4223   BFD_RELOC_IA64_IMM64
4224 ENUMX
4225   BFD_RELOC_IA64_DIR32MSB
4226 ENUMX
4227   BFD_RELOC_IA64_DIR32LSB
4228 ENUMX
4229   BFD_RELOC_IA64_DIR64MSB
4230 ENUMX
4231   BFD_RELOC_IA64_DIR64LSB
4232 ENUMX
4233   BFD_RELOC_IA64_GPREL22
4234 ENUMX
4235   BFD_RELOC_IA64_GPREL64I
4236 ENUMX
4237   BFD_RELOC_IA64_GPREL32MSB
4238 ENUMX
4239   BFD_RELOC_IA64_GPREL32LSB
4240 ENUMX
4241   BFD_RELOC_IA64_GPREL64MSB
4242 ENUMX
4243   BFD_RELOC_IA64_GPREL64LSB
4244 ENUMX
4245   BFD_RELOC_IA64_LTOFF22
4246 ENUMX
4247   BFD_RELOC_IA64_LTOFF64I
4248 ENUMX
4249   BFD_RELOC_IA64_PLTOFF22
4250 ENUMX
4251   BFD_RELOC_IA64_PLTOFF64I
4252 ENUMX
4253   BFD_RELOC_IA64_PLTOFF64MSB
4254 ENUMX
4255   BFD_RELOC_IA64_PLTOFF64LSB
4256 ENUMX
4257   BFD_RELOC_IA64_FPTR64I
4258 ENUMX
4259   BFD_RELOC_IA64_FPTR32MSB
4260 ENUMX
4261   BFD_RELOC_IA64_FPTR32LSB
4262 ENUMX
4263   BFD_RELOC_IA64_FPTR64MSB
4264 ENUMX
4265   BFD_RELOC_IA64_FPTR64LSB
4266 ENUMX
4267   BFD_RELOC_IA64_PCREL21B
4268 ENUMX
4269   BFD_RELOC_IA64_PCREL21BI
4270 ENUMX
4271   BFD_RELOC_IA64_PCREL21M
4272 ENUMX
4273   BFD_RELOC_IA64_PCREL21F
4274 ENUMX
4275   BFD_RELOC_IA64_PCREL22
4276 ENUMX
4277   BFD_RELOC_IA64_PCREL60B
4278 ENUMX
4279   BFD_RELOC_IA64_PCREL64I
4280 ENUMX
4281   BFD_RELOC_IA64_PCREL32MSB
4282 ENUMX
4283   BFD_RELOC_IA64_PCREL32LSB
4284 ENUMX
4285   BFD_RELOC_IA64_PCREL64MSB
4286 ENUMX
4287   BFD_RELOC_IA64_PCREL64LSB
4288 ENUMX
4289   BFD_RELOC_IA64_LTOFF_FPTR22
4290 ENUMX
4291   BFD_RELOC_IA64_LTOFF_FPTR64I
4292 ENUMX
4293   BFD_RELOC_IA64_LTOFF_FPTR32MSB
4294 ENUMX
4295   BFD_RELOC_IA64_LTOFF_FPTR32LSB
4296 ENUMX
4297   BFD_RELOC_IA64_LTOFF_FPTR64MSB
4298 ENUMX
4299   BFD_RELOC_IA64_LTOFF_FPTR64LSB
4300 ENUMX
4301   BFD_RELOC_IA64_SEGREL32MSB
4302 ENUMX
4303   BFD_RELOC_IA64_SEGREL32LSB
4304 ENUMX
4305   BFD_RELOC_IA64_SEGREL64MSB
4306 ENUMX
4307   BFD_RELOC_IA64_SEGREL64LSB
4308 ENUMX
4309   BFD_RELOC_IA64_SECREL32MSB
4310 ENUMX
4311   BFD_RELOC_IA64_SECREL32LSB
4312 ENUMX
4313   BFD_RELOC_IA64_SECREL64MSB
4314 ENUMX
4315   BFD_RELOC_IA64_SECREL64LSB
4316 ENUMX
4317   BFD_RELOC_IA64_REL32MSB
4318 ENUMX
4319   BFD_RELOC_IA64_REL32LSB
4320 ENUMX
4321   BFD_RELOC_IA64_REL64MSB
4322 ENUMX
4323   BFD_RELOC_IA64_REL64LSB
4324 ENUMX
4325   BFD_RELOC_IA64_LTV32MSB
4326 ENUMX
4327   BFD_RELOC_IA64_LTV32LSB
4328 ENUMX
4329   BFD_RELOC_IA64_LTV64MSB
4330 ENUMX
4331   BFD_RELOC_IA64_LTV64LSB
4332 ENUMX
4333   BFD_RELOC_IA64_IPLTMSB
4334 ENUMX
4335   BFD_RELOC_IA64_IPLTLSB
4336 ENUMX
4337   BFD_RELOC_IA64_COPY
4338 ENUMX
4339   BFD_RELOC_IA64_LTOFF22X
4340 ENUMX
4341   BFD_RELOC_IA64_LDXMOV
4342 ENUMX
4343   BFD_RELOC_IA64_TPREL14
4344 ENUMX
4345   BFD_RELOC_IA64_TPREL22
4346 ENUMX
4347   BFD_RELOC_IA64_TPREL64I
4348 ENUMX
4349   BFD_RELOC_IA64_TPREL64MSB
4350 ENUMX
4351   BFD_RELOC_IA64_TPREL64LSB
4352 ENUMX
4353   BFD_RELOC_IA64_LTOFF_TPREL22
4354 ENUMX
4355   BFD_RELOC_IA64_DTPMOD64MSB
4356 ENUMX
4357   BFD_RELOC_IA64_DTPMOD64LSB
4358 ENUMX
4359   BFD_RELOC_IA64_LTOFF_DTPMOD22
4360 ENUMX
4361   BFD_RELOC_IA64_DTPREL14
4362 ENUMX
4363   BFD_RELOC_IA64_DTPREL22
4364 ENUMX
4365   BFD_RELOC_IA64_DTPREL64I
4366 ENUMX
4367   BFD_RELOC_IA64_DTPREL32MSB
4368 ENUMX
4369   BFD_RELOC_IA64_DTPREL32LSB
4370 ENUMX
4371   BFD_RELOC_IA64_DTPREL64MSB
4372 ENUMX
4373   BFD_RELOC_IA64_DTPREL64LSB
4374 ENUMX
4375   BFD_RELOC_IA64_LTOFF_DTPREL22
4376 ENUMDOC
4377   Intel IA64 Relocations.
4378
4379 ENUM
4380   BFD_RELOC_M68HC11_HI8
4381 ENUMDOC
4382   Motorola 68HC11 reloc.
4383   This is the 8 bit high part of an absolute address.
4384 ENUM
4385   BFD_RELOC_M68HC11_LO8
4386 ENUMDOC
4387   Motorola 68HC11 reloc.
4388   This is the 8 bit low part of an absolute address.
4389 ENUM
4390   BFD_RELOC_M68HC11_3B
4391 ENUMDOC
4392   Motorola 68HC11 reloc.
4393   This is the 3 bit of a value.
4394 ENUM
4395   BFD_RELOC_M68HC11_RL_JUMP
4396 ENUMDOC
4397   Motorola 68HC11 reloc.
4398   This reloc marks the beginning of a jump/call instruction.
4399   It is used for linker relaxation to correctly identify beginning
4400   of instruction and change some branches to use PC-relative
4401   addressing mode.
4402 ENUM
4403   BFD_RELOC_M68HC11_RL_GROUP
4404 ENUMDOC
4405   Motorola 68HC11 reloc.
4406   This reloc marks a group of several instructions that gcc generates
4407   and for which the linker relaxation pass can modify and/or remove
4408   some of them.
4409 ENUM
4410   BFD_RELOC_M68HC11_LO16
4411 ENUMDOC
4412   Motorola 68HC11 reloc.
4413   This is the 16-bit lower part of an address.  It is used for 'call'
4414   instruction to specify the symbol address without any special
4415   transformation (due to memory bank window).
4416 ENUM
4417   BFD_RELOC_M68HC11_PAGE
4418 ENUMDOC
4419   Motorola 68HC11 reloc.
4420   This is a 8-bit reloc that specifies the page number of an address.
4421   It is used by 'call' instruction to specify the page number of
4422   the symbol.
4423 ENUM
4424   BFD_RELOC_M68HC11_24
4425 ENUMDOC
4426   Motorola 68HC11 reloc.
4427   This is a 24-bit reloc that represents the address with a 16-bit
4428   value and a 8-bit page number.  The symbol address is transformed
4429   to follow the 16K memory bank of 68HC12 (seen as mapped in the window).
4430 ENUM
4431   BFD_RELOC_M68HC12_5B
4432 ENUMDOC
4433   Motorola 68HC12 reloc.
4434   This is the 5 bits of a value.
4435
4436 ENUM
4437   BFD_RELOC_16C_NUM08
4438 ENUMX
4439   BFD_RELOC_16C_NUM08_C
4440 ENUMX
4441   BFD_RELOC_16C_NUM16
4442 ENUMX
4443   BFD_RELOC_16C_NUM16_C
4444 ENUMX
4445   BFD_RELOC_16C_NUM32
4446 ENUMX
4447   BFD_RELOC_16C_NUM32_C
4448 ENUMX
4449   BFD_RELOC_16C_DISP04
4450 ENUMX
4451   BFD_RELOC_16C_DISP04_C
4452 ENUMX
4453   BFD_RELOC_16C_DISP08
4454 ENUMX
4455   BFD_RELOC_16C_DISP08_C
4456 ENUMX
4457   BFD_RELOC_16C_DISP16
4458 ENUMX
4459   BFD_RELOC_16C_DISP16_C
4460 ENUMX
4461   BFD_RELOC_16C_DISP24
4462 ENUMX
4463   BFD_RELOC_16C_DISP24_C
4464 ENUMX
4465   BFD_RELOC_16C_DISP24a
4466 ENUMX
4467   BFD_RELOC_16C_DISP24a_C
4468 ENUMX
4469   BFD_RELOC_16C_REG04
4470 ENUMX
4471   BFD_RELOC_16C_REG04_C
4472 ENUMX
4473   BFD_RELOC_16C_REG04a
4474 ENUMX
4475   BFD_RELOC_16C_REG04a_C
4476 ENUMX
4477   BFD_RELOC_16C_REG14
4478 ENUMX
4479   BFD_RELOC_16C_REG14_C
4480 ENUMX
4481   BFD_RELOC_16C_REG16
4482 ENUMX
4483   BFD_RELOC_16C_REG16_C
4484 ENUMX
4485   BFD_RELOC_16C_REG20
4486 ENUMX
4487   BFD_RELOC_16C_REG20_C
4488 ENUMX
4489   BFD_RELOC_16C_ABS20
4490 ENUMX
4491   BFD_RELOC_16C_ABS20_C
4492 ENUMX
4493   BFD_RELOC_16C_ABS24
4494 ENUMX
4495   BFD_RELOC_16C_ABS24_C
4496 ENUMX
4497   BFD_RELOC_16C_IMM04
4498 ENUMX
4499   BFD_RELOC_16C_IMM04_C
4500 ENUMX
4501   BFD_RELOC_16C_IMM16
4502 ENUMX
4503   BFD_RELOC_16C_IMM16_C
4504 ENUMX
4505   BFD_RELOC_16C_IMM20
4506 ENUMX
4507   BFD_RELOC_16C_IMM20_C
4508 ENUMX
4509   BFD_RELOC_16C_IMM24
4510 ENUMX
4511   BFD_RELOC_16C_IMM24_C
4512 ENUMX
4513   BFD_RELOC_16C_IMM32
4514 ENUMX
4515   BFD_RELOC_16C_IMM32_C
4516 ENUMDOC
4517   NS CR16C Relocations.
4518
4519 ENUM
4520   BFD_RELOC_CR16_NUM8
4521 ENUMX
4522   BFD_RELOC_CR16_NUM16
4523 ENUMX
4524   BFD_RELOC_CR16_NUM32
4525 ENUMX
4526   BFD_RELOC_CR16_NUM32a
4527 ENUMX
4528   BFD_RELOC_CR16_REGREL0
4529 ENUMX
4530   BFD_RELOC_CR16_REGREL4
4531 ENUMX
4532   BFD_RELOC_CR16_REGREL4a
4533 ENUMX
4534   BFD_RELOC_CR16_REGREL14
4535 ENUMX
4536   BFD_RELOC_CR16_REGREL14a
4537 ENUMX
4538   BFD_RELOC_CR16_REGREL16
4539 ENUMX
4540   BFD_RELOC_CR16_REGREL20
4541 ENUMX
4542   BFD_RELOC_CR16_REGREL20a
4543 ENUMX
4544   BFD_RELOC_CR16_ABS20
4545 ENUMX
4546   BFD_RELOC_CR16_ABS24
4547 ENUMX
4548   BFD_RELOC_CR16_IMM4
4549 ENUMX
4550   BFD_RELOC_CR16_IMM8
4551 ENUMX
4552   BFD_RELOC_CR16_IMM16
4553 ENUMX
4554   BFD_RELOC_CR16_IMM20
4555 ENUMX
4556   BFD_RELOC_CR16_IMM24
4557 ENUMX
4558   BFD_RELOC_CR16_IMM32
4559 ENUMX
4560   BFD_RELOC_CR16_IMM32a
4561 ENUMX
4562   BFD_RELOC_CR16_DISP4
4563 ENUMX
4564   BFD_RELOC_CR16_DISP8
4565 ENUMX
4566   BFD_RELOC_CR16_DISP16
4567 ENUMX
4568   BFD_RELOC_CR16_DISP20
4569 ENUMX
4570   BFD_RELOC_CR16_DISP24
4571 ENUMX
4572   BFD_RELOC_CR16_DISP24a
4573 ENUMDOC
4574   NS CR16 Relocations.
4575
4576 ENUM
4577   BFD_RELOC_CRX_REL4
4578 ENUMX
4579   BFD_RELOC_CRX_REL8
4580 ENUMX
4581   BFD_RELOC_CRX_REL8_CMP
4582 ENUMX
4583   BFD_RELOC_CRX_REL16
4584 ENUMX
4585   BFD_RELOC_CRX_REL24
4586 ENUMX
4587   BFD_RELOC_CRX_REL32
4588 ENUMX
4589   BFD_RELOC_CRX_REGREL12
4590 ENUMX
4591   BFD_RELOC_CRX_REGREL22
4592 ENUMX
4593   BFD_RELOC_CRX_REGREL28
4594 ENUMX
4595   BFD_RELOC_CRX_REGREL32
4596 ENUMX
4597   BFD_RELOC_CRX_ABS16
4598 ENUMX
4599   BFD_RELOC_CRX_ABS32
4600 ENUMX
4601   BFD_RELOC_CRX_NUM8
4602 ENUMX
4603   BFD_RELOC_CRX_NUM16
4604 ENUMX
4605   BFD_RELOC_CRX_NUM32
4606 ENUMX
4607   BFD_RELOC_CRX_IMM16
4608 ENUMX
4609   BFD_RELOC_CRX_IMM32
4610 ENUMX
4611   BFD_RELOC_CRX_SWITCH8
4612 ENUMX
4613   BFD_RELOC_CRX_SWITCH16
4614 ENUMX
4615   BFD_RELOC_CRX_SWITCH32
4616 ENUMDOC
4617   NS CRX Relocations.
4618
4619 ENUM
4620   BFD_RELOC_CRIS_BDISP8
4621 ENUMX
4622   BFD_RELOC_CRIS_UNSIGNED_5
4623 ENUMX
4624   BFD_RELOC_CRIS_SIGNED_6
4625 ENUMX
4626   BFD_RELOC_CRIS_UNSIGNED_6
4627 ENUMX
4628   BFD_RELOC_CRIS_SIGNED_8
4629 ENUMX
4630   BFD_RELOC_CRIS_UNSIGNED_8
4631 ENUMX
4632   BFD_RELOC_CRIS_SIGNED_16
4633 ENUMX
4634   BFD_RELOC_CRIS_UNSIGNED_16
4635 ENUMX
4636   BFD_RELOC_CRIS_LAPCQ_OFFSET
4637 ENUMX
4638   BFD_RELOC_CRIS_UNSIGNED_4
4639 ENUMDOC
4640   These relocs are only used within the CRIS assembler.  They are not
4641   (at present) written to any object files.
4642 ENUM
4643   BFD_RELOC_CRIS_COPY
4644 ENUMX
4645   BFD_RELOC_CRIS_GLOB_DAT
4646 ENUMX
4647   BFD_RELOC_CRIS_JUMP_SLOT
4648 ENUMX
4649   BFD_RELOC_CRIS_RELATIVE
4650 ENUMDOC
4651   Relocs used in ELF shared libraries for CRIS.
4652 ENUM
4653   BFD_RELOC_CRIS_32_GOT
4654 ENUMDOC
4655   32-bit offset to symbol-entry within GOT.
4656 ENUM
4657   BFD_RELOC_CRIS_16_GOT
4658 ENUMDOC
4659   16-bit offset to symbol-entry within GOT.
4660 ENUM
4661   BFD_RELOC_CRIS_32_GOTPLT
4662 ENUMDOC
4663   32-bit offset to symbol-entry within GOT, with PLT handling.
4664 ENUM
4665   BFD_RELOC_CRIS_16_GOTPLT
4666 ENUMDOC
4667   16-bit offset to symbol-entry within GOT, with PLT handling.
4668 ENUM
4669   BFD_RELOC_CRIS_32_GOTREL
4670 ENUMDOC
4671   32-bit offset to symbol, relative to GOT.
4672 ENUM
4673   BFD_RELOC_CRIS_32_PLT_GOTREL
4674 ENUMDOC
4675   32-bit offset to symbol with PLT entry, relative to GOT.
4676 ENUM
4677   BFD_RELOC_CRIS_32_PLT_PCREL
4678 ENUMDOC
4679   32-bit offset to symbol with PLT entry, relative to this relocation.
4680
4681 ENUM
4682   BFD_RELOC_860_COPY
4683 ENUMX
4684   BFD_RELOC_860_GLOB_DAT
4685 ENUMX
4686   BFD_RELOC_860_JUMP_SLOT
4687 ENUMX
4688   BFD_RELOC_860_RELATIVE
4689 ENUMX
4690   BFD_RELOC_860_PC26
4691 ENUMX
4692   BFD_RELOC_860_PLT26
4693 ENUMX
4694   BFD_RELOC_860_PC16
4695 ENUMX
4696   BFD_RELOC_860_LOW0
4697 ENUMX
4698   BFD_RELOC_860_SPLIT0
4699 ENUMX
4700   BFD_RELOC_860_LOW1
4701 ENUMX
4702   BFD_RELOC_860_SPLIT1
4703 ENUMX
4704   BFD_RELOC_860_LOW2
4705 ENUMX
4706   BFD_RELOC_860_SPLIT2
4707 ENUMX
4708   BFD_RELOC_860_LOW3
4709 ENUMX
4710   BFD_RELOC_860_LOGOT0
4711 ENUMX
4712   BFD_RELOC_860_SPGOT0
4713 ENUMX
4714   BFD_RELOC_860_LOGOT1
4715 ENUMX
4716   BFD_RELOC_860_SPGOT1
4717 ENUMX
4718   BFD_RELOC_860_LOGOTOFF0
4719 ENUMX
4720   BFD_RELOC_860_SPGOTOFF0
4721 ENUMX
4722   BFD_RELOC_860_LOGOTOFF1
4723 ENUMX
4724   BFD_RELOC_860_SPGOTOFF1
4725 ENUMX
4726   BFD_RELOC_860_LOGOTOFF2
4727 ENUMX
4728   BFD_RELOC_860_LOGOTOFF3
4729 ENUMX
4730   BFD_RELOC_860_LOPC
4731 ENUMX
4732   BFD_RELOC_860_HIGHADJ
4733 ENUMX
4734   BFD_RELOC_860_HAGOT
4735 ENUMX
4736   BFD_RELOC_860_HAGOTOFF
4737 ENUMX
4738   BFD_RELOC_860_HAPC
4739 ENUMX
4740   BFD_RELOC_860_HIGH
4741 ENUMX
4742   BFD_RELOC_860_HIGOT
4743 ENUMX
4744   BFD_RELOC_860_HIGOTOFF
4745 ENUMDOC
4746   Intel i860 Relocations.
4747
4748 ENUM
4749   BFD_RELOC_OPENRISC_ABS_26
4750 ENUMX
4751   BFD_RELOC_OPENRISC_REL_26
4752 ENUMDOC
4753   OpenRISC Relocations.
4754
4755 ENUM
4756   BFD_RELOC_H8_DIR16A8
4757 ENUMX
4758   BFD_RELOC_H8_DIR16R8
4759 ENUMX
4760   BFD_RELOC_H8_DIR24A8
4761 ENUMX
4762   BFD_RELOC_H8_DIR24R8
4763 ENUMX
4764   BFD_RELOC_H8_DIR32A16
4765 ENUMDOC
4766   H8 elf Relocations.
4767
4768 ENUM
4769   BFD_RELOC_XSTORMY16_REL_12
4770 ENUMX
4771   BFD_RELOC_XSTORMY16_12
4772 ENUMX
4773   BFD_RELOC_XSTORMY16_24
4774 ENUMX
4775   BFD_RELOC_XSTORMY16_FPTR16
4776 ENUMDOC
4777   Sony Xstormy16 Relocations.
4778
4779 ENUM
4780   BFD_RELOC_RELC
4781 ENUMDOC
4782   Self-describing complex relocations.
4783 COMMENT
4784
4785 ENUM
4786   BFD_RELOC_XC16X_PAG
4787 ENUMX
4788   BFD_RELOC_XC16X_POF
4789 ENUMX
4790   BFD_RELOC_XC16X_SEG
4791 ENUMX
4792   BFD_RELOC_XC16X_SOF
4793 ENUMDOC
4794   Infineon Relocations.
4795
4796 ENUM
4797   BFD_RELOC_VAX_GLOB_DAT
4798 ENUMX
4799   BFD_RELOC_VAX_JMP_SLOT
4800 ENUMX
4801   BFD_RELOC_VAX_RELATIVE
4802 ENUMDOC
4803   Relocations used by VAX ELF.
4804
4805 ENUM
4806   BFD_RELOC_MT_PC16
4807 ENUMDOC
4808   Morpho MT - 16 bit immediate relocation.
4809 ENUM
4810   BFD_RELOC_MT_HI16
4811 ENUMDOC
4812   Morpho MT - Hi 16 bits of an address.
4813 ENUM
4814   BFD_RELOC_MT_LO16
4815 ENUMDOC
4816   Morpho MT - Low 16 bits of an address.
4817 ENUM
4818   BFD_RELOC_MT_GNU_VTINHERIT
4819 ENUMDOC
4820   Morpho MT - Used to tell the linker which vtable entries are used.
4821 ENUM
4822   BFD_RELOC_MT_GNU_VTENTRY
4823 ENUMDOC
4824   Morpho MT - Used to tell the linker which vtable entries are used.
4825 ENUM
4826   BFD_RELOC_MT_PCINSN8
4827 ENUMDOC
4828   Morpho MT - 8 bit immediate relocation.
4829
4830 ENUM
4831   BFD_RELOC_MSP430_10_PCREL
4832 ENUMX
4833   BFD_RELOC_MSP430_16_PCREL
4834 ENUMX
4835   BFD_RELOC_MSP430_16
4836 ENUMX
4837   BFD_RELOC_MSP430_16_PCREL_BYTE
4838 ENUMX
4839   BFD_RELOC_MSP430_16_BYTE
4840 ENUMX
4841   BFD_RELOC_MSP430_2X_PCREL
4842 ENUMX
4843   BFD_RELOC_MSP430_RL_PCREL
4844 ENUMDOC
4845   msp430 specific relocation codes
4846
4847 ENUM
4848   BFD_RELOC_IQ2000_OFFSET_16
4849 ENUMX
4850   BFD_RELOC_IQ2000_OFFSET_21
4851 ENUMX
4852   BFD_RELOC_IQ2000_UHI16
4853 ENUMDOC
4854   IQ2000 Relocations.
4855
4856 ENUM
4857   BFD_RELOC_XTENSA_RTLD
4858 ENUMDOC
4859   Special Xtensa relocation used only by PLT entries in ELF shared
4860   objects to indicate that the runtime linker should set the value
4861   to one of its own internal functions or data structures.
4862 ENUM
4863   BFD_RELOC_XTENSA_GLOB_DAT
4864 ENUMX
4865   BFD_RELOC_XTENSA_JMP_SLOT
4866 ENUMX
4867   BFD_RELOC_XTENSA_RELATIVE
4868 ENUMDOC
4869   Xtensa relocations for ELF shared objects.
4870 ENUM
4871   BFD_RELOC_XTENSA_PLT
4872 ENUMDOC
4873   Xtensa relocation used in ELF object files for symbols that may require
4874   PLT entries.  Otherwise, this is just a generic 32-bit relocation.
4875 ENUM
4876   BFD_RELOC_XTENSA_DIFF8
4877 ENUMX
4878   BFD_RELOC_XTENSA_DIFF16
4879 ENUMX
4880   BFD_RELOC_XTENSA_DIFF32
4881 ENUMDOC
4882   Xtensa relocations to mark the difference of two local symbols.
4883   These are only needed to support linker relaxation and can be ignored
4884   when not relaxing.  The field is set to the value of the difference
4885   assuming no relaxation.  The relocation encodes the position of the
4886   first symbol so the linker can determine whether to adjust the field
4887   value.
4888 ENUM
4889   BFD_RELOC_XTENSA_SLOT0_OP
4890 ENUMX
4891   BFD_RELOC_XTENSA_SLOT1_OP
4892 ENUMX
4893   BFD_RELOC_XTENSA_SLOT2_OP
4894 ENUMX
4895   BFD_RELOC_XTENSA_SLOT3_OP
4896 ENUMX
4897   BFD_RELOC_XTENSA_SLOT4_OP
4898 ENUMX
4899   BFD_RELOC_XTENSA_SLOT5_OP
4900 ENUMX
4901   BFD_RELOC_XTENSA_SLOT6_OP
4902 ENUMX
4903   BFD_RELOC_XTENSA_SLOT7_OP
4904 ENUMX
4905   BFD_RELOC_XTENSA_SLOT8_OP
4906 ENUMX
4907   BFD_RELOC_XTENSA_SLOT9_OP
4908 ENUMX
4909   BFD_RELOC_XTENSA_SLOT10_OP
4910 ENUMX
4911   BFD_RELOC_XTENSA_SLOT11_OP
4912 ENUMX
4913   BFD_RELOC_XTENSA_SLOT12_OP
4914 ENUMX
4915   BFD_RELOC_XTENSA_SLOT13_OP
4916 ENUMX
4917   BFD_RELOC_XTENSA_SLOT14_OP
4918 ENUMDOC
4919   Generic Xtensa relocations for instruction operands.  Only the slot
4920   number is encoded in the relocation.  The relocation applies to the
4921   last PC-relative immediate operand, or if there are no PC-relative
4922   immediates, to the last immediate operand.
4923 ENUM
4924   BFD_RELOC_XTENSA_SLOT0_ALT
4925 ENUMX
4926   BFD_RELOC_XTENSA_SLOT1_ALT
4927 ENUMX
4928   BFD_RELOC_XTENSA_SLOT2_ALT
4929 ENUMX
4930   BFD_RELOC_XTENSA_SLOT3_ALT
4931 ENUMX
4932   BFD_RELOC_XTENSA_SLOT4_ALT
4933 ENUMX
4934   BFD_RELOC_XTENSA_SLOT5_ALT
4935 ENUMX
4936   BFD_RELOC_XTENSA_SLOT6_ALT
4937 ENUMX
4938   BFD_RELOC_XTENSA_SLOT7_ALT
4939 ENUMX
4940   BFD_RELOC_XTENSA_SLOT8_ALT
4941 ENUMX
4942   BFD_RELOC_XTENSA_SLOT9_ALT
4943 ENUMX
4944   BFD_RELOC_XTENSA_SLOT10_ALT
4945 ENUMX
4946   BFD_RELOC_XTENSA_SLOT11_ALT
4947 ENUMX
4948   BFD_RELOC_XTENSA_SLOT12_ALT
4949 ENUMX
4950   BFD_RELOC_XTENSA_SLOT13_ALT
4951 ENUMX
4952   BFD_RELOC_XTENSA_SLOT14_ALT
4953 ENUMDOC
4954   Alternate Xtensa relocations.  Only the slot is encoded in the
4955   relocation.  The meaning of these relocations is opcode-specific.
4956 ENUM
4957   BFD_RELOC_XTENSA_OP0
4958 ENUMX
4959   BFD_RELOC_XTENSA_OP1
4960 ENUMX
4961   BFD_RELOC_XTENSA_OP2
4962 ENUMDOC
4963   Xtensa relocations for backward compatibility.  These have all been
4964   replaced by BFD_RELOC_XTENSA_SLOT0_OP.
4965 ENUM
4966   BFD_RELOC_XTENSA_ASM_EXPAND
4967 ENUMDOC
4968   Xtensa relocation to mark that the assembler expanded the
4969   instructions from an original target.  The expansion size is
4970   encoded in the reloc size.
4971 ENUM
4972   BFD_RELOC_XTENSA_ASM_SIMPLIFY
4973 ENUMDOC
4974   Xtensa relocation to mark that the linker should simplify
4975   assembler-expanded instructions.  This is commonly used
4976   internally by the linker after analysis of a
4977   BFD_RELOC_XTENSA_ASM_EXPAND.
4978
4979 ENUM
4980   BFD_RELOC_Z80_DISP8
4981 ENUMDOC
4982   8 bit signed offset in (ix+d) or (iy+d).
4983
4984 ENUM
4985   BFD_RELOC_Z8K_DISP7
4986 ENUMDOC
4987   DJNZ offset.
4988 ENUM
4989   BFD_RELOC_Z8K_CALLR
4990 ENUMDOC
4991   CALR offset.
4992 ENUM
4993   BFD_RELOC_Z8K_IMM4L
4994 ENUMDOC
4995   4 bit value.
4996
4997 ENDSENUM
4998   BFD_RELOC_UNUSED
4999 CODE_FRAGMENT
5000 .
5001 .typedef enum bfd_reloc_code_real bfd_reloc_code_real_type;
5002 */
5003
5004 /*
5005 FUNCTION
5006         bfd_reloc_type_lookup
5007         bfd_reloc_name_lookup
5008
5009 SYNOPSIS
5010         reloc_howto_type *bfd_reloc_type_lookup
5011           (bfd *abfd, bfd_reloc_code_real_type code);
5012         reloc_howto_type *bfd_reloc_name_lookup
5013           (bfd *abfd, const char *reloc_name);
5014
5015 DESCRIPTION
5016         Return a pointer to a howto structure which, when
5017         invoked, will perform the relocation @var{code} on data from the
5018         architecture noted.
5019
5020 */
5021
5022 reloc_howto_type *
5023 bfd_reloc_type_lookup (bfd *abfd, bfd_reloc_code_real_type code)
5024 {
5025   return BFD_SEND (abfd, reloc_type_lookup, (abfd, code));
5026 }
5027
5028 reloc_howto_type *
5029 bfd_reloc_name_lookup (bfd *abfd, const char *reloc_name)
5030 {
5031   return BFD_SEND (abfd, reloc_name_lookup, (abfd, reloc_name));
5032 }
5033
5034 static reloc_howto_type bfd_howto_32 =
5035 HOWTO (0, 00, 2, 32, FALSE, 0, complain_overflow_dont, 0, "VRT32", FALSE, 0xffffffff, 0xffffffff, TRUE);
5036
5037 /*
5038 INTERNAL_FUNCTION
5039         bfd_default_reloc_type_lookup
5040
5041 SYNOPSIS
5042         reloc_howto_type *bfd_default_reloc_type_lookup
5043           (bfd *abfd, bfd_reloc_code_real_type  code);
5044
5045 DESCRIPTION
5046         Provides a default relocation lookup routine for any architecture.
5047
5048 */
5049
5050 reloc_howto_type *
5051 bfd_default_reloc_type_lookup (bfd *abfd, bfd_reloc_code_real_type code)
5052 {
5053   switch (code)
5054     {
5055     case BFD_RELOC_CTOR:
5056       /* The type of reloc used in a ctor, which will be as wide as the
5057          address - so either a 64, 32, or 16 bitter.  */
5058       switch (bfd_get_arch_info (abfd)->bits_per_address)
5059         {
5060         case 64:
5061           BFD_FAIL ();
5062         case 32:
5063           return &bfd_howto_32;
5064         case 16:
5065           BFD_FAIL ();
5066         default:
5067           BFD_FAIL ();
5068         }
5069     default:
5070       BFD_FAIL ();
5071     }
5072   return NULL;
5073 }
5074
5075 /*
5076 FUNCTION
5077         bfd_get_reloc_code_name
5078
5079 SYNOPSIS
5080         const char *bfd_get_reloc_code_name (bfd_reloc_code_real_type code);
5081
5082 DESCRIPTION
5083         Provides a printable name for the supplied relocation code.
5084         Useful mainly for printing error messages.
5085 */
5086
5087 const char *
5088 bfd_get_reloc_code_name (bfd_reloc_code_real_type code)
5089 {
5090   if (code > BFD_RELOC_UNUSED)
5091     return 0;
5092   return bfd_reloc_code_real_names[code];
5093 }
5094
5095 /*
5096 INTERNAL_FUNCTION
5097         bfd_generic_relax_section
5098
5099 SYNOPSIS
5100         bfd_boolean bfd_generic_relax_section
5101           (bfd *abfd,
5102            asection *section,
5103            struct bfd_link_info *,
5104            bfd_boolean *);
5105
5106 DESCRIPTION
5107         Provides default handling for relaxing for back ends which
5108         don't do relaxing.
5109 */
5110
5111 bfd_boolean
5112 bfd_generic_relax_section (bfd *abfd ATTRIBUTE_UNUSED,
5113                            asection *section ATTRIBUTE_UNUSED,
5114                            struct bfd_link_info *link_info ATTRIBUTE_UNUSED,
5115                            bfd_boolean *again)
5116 {
5117   *again = FALSE;
5118   return TRUE;
5119 }
5120
5121 /*
5122 INTERNAL_FUNCTION
5123         bfd_generic_gc_sections
5124
5125 SYNOPSIS
5126         bfd_boolean bfd_generic_gc_sections
5127           (bfd *, struct bfd_link_info *);
5128
5129 DESCRIPTION
5130         Provides default handling for relaxing for back ends which
5131         don't do section gc -- i.e., does nothing.
5132 */
5133
5134 bfd_boolean
5135 bfd_generic_gc_sections (bfd *abfd ATTRIBUTE_UNUSED,
5136                          struct bfd_link_info *info ATTRIBUTE_UNUSED)
5137 {
5138   return TRUE;
5139 }
5140
5141 /*
5142 INTERNAL_FUNCTION
5143         bfd_generic_merge_sections
5144
5145 SYNOPSIS
5146         bfd_boolean bfd_generic_merge_sections
5147           (bfd *, struct bfd_link_info *);
5148
5149 DESCRIPTION
5150         Provides default handling for SEC_MERGE section merging for back ends
5151         which don't have SEC_MERGE support -- i.e., does nothing.
5152 */
5153
5154 bfd_boolean
5155 bfd_generic_merge_sections (bfd *abfd ATTRIBUTE_UNUSED,
5156                             struct bfd_link_info *link_info ATTRIBUTE_UNUSED)
5157 {
5158   return TRUE;
5159 }
5160
5161 /*
5162 INTERNAL_FUNCTION
5163         bfd_generic_get_relocated_section_contents
5164
5165 SYNOPSIS
5166         bfd_byte *bfd_generic_get_relocated_section_contents
5167           (bfd *abfd,
5168            struct bfd_link_info *link_info,
5169            struct bfd_link_order *link_order,
5170            bfd_byte *data,
5171            bfd_boolean relocatable,
5172            asymbol **symbols);
5173
5174 DESCRIPTION
5175         Provides default handling of relocation effort for back ends
5176         which can't be bothered to do it efficiently.
5177
5178 */
5179
5180 bfd_byte *
5181 bfd_generic_get_relocated_section_contents (bfd *abfd,
5182                                             struct bfd_link_info *link_info,
5183                                             struct bfd_link_order *link_order,
5184                                             bfd_byte *data,
5185                                             bfd_boolean relocatable,
5186                                             asymbol **symbols)
5187 {
5188   /* Get enough memory to hold the stuff.  */
5189   bfd *input_bfd = link_order->u.indirect.section->owner;
5190   asection *input_section = link_order->u.indirect.section;
5191
5192   long reloc_size = bfd_get_reloc_upper_bound (input_bfd, input_section);
5193   arelent **reloc_vector = NULL;
5194   long reloc_count;
5195   bfd_size_type sz;
5196
5197   if (reloc_size < 0)
5198     goto error_return;
5199
5200   reloc_vector = bfd_malloc (reloc_size);
5201   if (reloc_vector == NULL && reloc_size != 0)
5202     goto error_return;
5203
5204   /* Read in the section.  */
5205   sz = input_section->rawsize ? input_section->rawsize : input_section->size;
5206   if (!bfd_get_section_contents (input_bfd, input_section, data, 0, sz))
5207     goto error_return;
5208
5209   reloc_count = bfd_canonicalize_reloc (input_bfd,
5210                                         input_section,
5211                                         reloc_vector,
5212                                         symbols);
5213   if (reloc_count < 0)
5214     goto error_return;
5215
5216   if (reloc_count > 0)
5217     {
5218       arelent **parent;
5219       for (parent = reloc_vector; *parent != NULL; parent++)
5220         {
5221           char *error_message = NULL;
5222           asymbol *symbol;
5223           bfd_reloc_status_type r;
5224
5225           symbol = *(*parent)->sym_ptr_ptr;
5226           if (symbol->section && elf_discarded_section (symbol->section))
5227             {
5228               bfd_byte *p;
5229               static reloc_howto_type none_howto
5230                 = HOWTO (0, 0, 0, 0, FALSE, 0, complain_overflow_dont, NULL,
5231                          "unused", FALSE, 0, 0, FALSE);
5232
5233               p = data + (*parent)->address * bfd_octets_per_byte (input_bfd);
5234               _bfd_clear_contents ((*parent)->howto, input_bfd, p);
5235               (*parent)->sym_ptr_ptr = bfd_abs_section.symbol_ptr_ptr;
5236               (*parent)->addend = 0;
5237               (*parent)->howto = &none_howto;
5238               r = bfd_reloc_ok;
5239             }
5240           else
5241             r = bfd_perform_relocation (input_bfd,
5242                                         *parent,
5243                                         data,
5244                                         input_section,
5245                                         relocatable ? abfd : NULL,
5246                                         &error_message);
5247
5248           if (relocatable)
5249             {
5250               asection *os = input_section->output_section;
5251
5252               /* A partial link, so keep the relocs.  */
5253               os->orelocation[os->reloc_count] = *parent;
5254               os->reloc_count++;
5255             }
5256
5257           if (r != bfd_reloc_ok)
5258             {
5259               switch (r)
5260                 {
5261                 case bfd_reloc_undefined:
5262                   if (!((*link_info->callbacks->undefined_symbol)
5263                         (link_info, bfd_asymbol_name (*(*parent)->sym_ptr_ptr),
5264                          input_bfd, input_section, (*parent)->address,
5265                          TRUE)))
5266                     goto error_return;
5267                   break;
5268                 case bfd_reloc_dangerous:
5269                   BFD_ASSERT (error_message != NULL);
5270                   if (!((*link_info->callbacks->reloc_dangerous)
5271                         (link_info, error_message, input_bfd, input_section,
5272                          (*parent)->address)))
5273                     goto error_return;
5274                   break;
5275                 case bfd_reloc_overflow:
5276                   if (!((*link_info->callbacks->reloc_overflow)
5277                         (link_info, NULL,
5278                          bfd_asymbol_name (*(*parent)->sym_ptr_ptr),
5279                          (*parent)->howto->name, (*parent)->addend,
5280                          input_bfd, input_section, (*parent)->address)))
5281                     goto error_return;
5282                   break;
5283                 case bfd_reloc_outofrange:
5284                 default:
5285                   abort ();
5286                   break;
5287                 }
5288
5289             }
5290         }
5291     }
5292   if (reloc_vector != NULL)
5293     free (reloc_vector);
5294   return data;
5295
5296 error_return:
5297   if (reloc_vector != NULL)
5298     free (reloc_vector);
5299   return NULL;
5300 }