bfd/bfd-in2.h

   1 /* Main header file for the bfd library -- portable access to object files.
   2    Copyright 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
   3    2000, 2001
   4    Free Software Foundation, Inc.
   5    Contributed by Cygnus Support.
   6
   7 ** NOTE: bfd.h and bfd-in2.h are GENERATED files.  Don't change them;
   8 ** instead, change bfd-in.h or the other BFD source files processed to
   9 ** generate these files.
  10
  11 This file is part of BFD, the Binary File Descriptor library.
  12
  13 This program is free software; you can redistribute it and/or modify
  14 it under the terms of the GNU General Public License as published by
  15 the Free Software Foundation; either version 2 of the License, or
  16 (at your option) any later version.
  17
  18 This program is distributed in the hope that it will be useful,
  19 but WITHOUT ANY WARRANTY; without even the implied warranty of
  20 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  21 GNU General Public License for more details.
  22
  23 You should have received a copy of the GNU General Public License
  24 along with this program; if not, write to the Free Software
  25 Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
  26
  27 /* bfd.h -- The only header file required by users of the bfd library
  28
  29 The bfd.h file is generated from bfd-in.h and various .c files; if you
  30 change it, your changes will probably be lost.
  31
  32 All the prototypes and definitions following the comment "THE FOLLOWING
  33 IS EXTRACTED FROM THE SOURCE" are extracted from the source files for
  34 BFD.  If you change it, someone oneday will extract it from the source
  35 again, and your changes will be lost.  To save yourself from this bind,
  36 change the definitions in the source in the bfd directory.  Type "make
  37 docs" and then "make headers" in that directory, and magically this file
  38 will change to reflect your changes.
  39
  40 If you don't have the tools to perform the extraction, then you are
  41 safe from someone on your system trampling over your header files.
  42 You should still maintain the equivalence between the source and this
  43 file though; every change you make to the .c file should be reflected
  44 here.  */
  45
  46 #ifndef __BFD_H_SEEN__
  47 #define __BFD_H_SEEN__
  48
  49 #ifdef __cplusplus
  50 extern "C" {
  51 #endif
  52
  53 #include "ansidecl.h"
  54
  55 /* These two lines get substitutions done by commands in Makefile.in.  */
  56 #define BFD_VERSION  "@VERSION@"
  57 #define BFD_ARCH_SIZE @wordsize@
  58 #define BFD_HOST_64BIT_LONG @BFD_HOST_64BIT_LONG@
  59 #if @BFD_HOST_64_BIT_DEFINED@
  60 #define BFD_HOST_64_BIT @BFD_HOST_64_BIT@
  61 #define BFD_HOST_U_64_BIT @BFD_HOST_U_64_BIT@
  62 #endif
  63
  64 #if BFD_ARCH_SIZE >= 64
  65 #define BFD64
  66 #endif
  67
  68 #ifndef INLINE
  69 #if __GNUC__ >= 2
  70 #define INLINE __inline__
  71 #else
  72 #define INLINE
  73 #endif
  74 #endif
  75
  76 /* forward declaration */
  77 typedef struct _bfd bfd;
  78
  79 /* To squelch erroneous compiler warnings ("illegal pointer
  80    combination") from the SVR3 compiler, we would like to typedef
  81    boolean to int (it doesn't like functions which return boolean.
  82    Making sure they are never implicitly declared to return int
  83    doesn't seem to help).  But this file is not configured based on
  84    the host.  */
  85 /* General rules: functions which are boolean return true on success
  86    and false on failure (unless they're a predicate).   -- bfd.doc */
  87 /* I'm sure this is going to break something and someone is going to
  88    force me to change it.  */
  89 /* typedef enum boolean {false, true} boolean; */
  90 /* Yup, SVR4 has a "typedef enum boolean" in <sys/types.h>  -fnf */
  91 /* It gets worse if the host also defines a true/false enum... -sts */
  92 /* And even worse if your compiler has built-in boolean types... -law */
  93 #if defined (__GNUG__) && (__GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 6))
  94 #define TRUE_FALSE_ALREADY_DEFINED
  95 #endif
  96 #ifdef MPW
  97 /* Pre-emptive strike - get the file with the enum.  */
  98 #include <Types.h>
  99 #define TRUE_FALSE_ALREADY_DEFINED
 100 #endif /* MPW */
 101 #ifndef TRUE_FALSE_ALREADY_DEFINED
 102 typedef enum bfd_boolean {false, true} boolean;
 103 #define BFD_TRUE_FALSE
 104 #else
 105 /* Use enum names that will appear nowhere else.  */
 106 typedef enum bfd_boolean {bfd_fffalse, bfd_tttrue} boolean;
 107 #endif
 108
 109 /* A pointer to a position in a file.  */
 110 /* FIXME:  This should be using off_t from <sys/types.h>.
 111    For now, try to avoid breaking stuff by not including <sys/types.h> here.
 112    This will break on systems with 64-bit file offsets (e.g. 4.4BSD).
 113    Probably the best long-term answer is to avoid using file_ptr AND off_t
 114    in this header file, and to handle this in the BFD implementation
 115    rather than in its interface.  */
 116 /* typedef off_t        file_ptr; */
 117 typedef long int file_ptr;
 118
 119 /* Support for different sizes of target format ints and addresses.
 120    If the type `long' is at least 64 bits, BFD_HOST_64BIT_LONG will be
 121    set to 1 above.  Otherwise, if gcc is being used, this code will
 122    use gcc's "long long" type.  Otherwise, BFD_HOST_64_BIT must be
 123    defined above.  */
 124
 125 #ifndef BFD_HOST_64_BIT
 126 # if BFD_HOST_64BIT_LONG
 127 #  define BFD_HOST_64_BIT long
 128 #  define BFD_HOST_U_64_BIT unsigned long
 129 # else
 130 #  ifdef __GNUC__
 131 #   if __GNUC__ >= 2
 132 #    define BFD_HOST_64_BIT long long
 133 #    define BFD_HOST_U_64_BIT unsigned long long
 134 #   endif /* __GNUC__ >= 2 */
 135 #  endif /* ! defined (__GNUC__) */
 136 # endif /* ! BFD_HOST_64BIT_LONG */
 137 #endif /* ! defined (BFD_HOST_64_BIT) */
 138
 139 #ifdef BFD64
 140
 141 #ifndef BFD_HOST_64_BIT
 142  #error No 64 bit integer type available
 143 #endif /* ! defined (BFD_HOST_64_BIT) */
 144
 145 typedef BFD_HOST_U_64_BIT bfd_vma;
 146 typedef BFD_HOST_64_BIT bfd_signed_vma;
 147 typedef BFD_HOST_U_64_BIT bfd_size_type;
 148 typedef BFD_HOST_U_64_BIT symvalue;
 149
 150 #ifndef fprintf_vma
 151 #if BFD_HOST_64BIT_LONG
 152 #define sprintf_vma(s,x) sprintf (s, "%016lx", x)
 153 #define fprintf_vma(f,x) fprintf (f, "%016lx", x)
 154 #else
 155 #define _bfd_int64_low(x) ((unsigned long) (((x) & 0xffffffff)))
 156 #define _bfd_int64_high(x) ((unsigned long) (((x) >> 32) & 0xffffffff))
 157 #define fprintf_vma(s,x) \
 158   fprintf ((s), "%08lx%08lx", _bfd_int64_high (x), _bfd_int64_low (x))
 159 #define sprintf_vma(s,x) \
 160   sprintf ((s), "%08lx%08lx", _bfd_int64_high (x), _bfd_int64_low (x))
 161 #endif
 162 #endif
 163
 164 #else /* not BFD64  */
 165
 166 /* Represent a target address.  Also used as a generic unsigned type
 167    which is guaranteed to be big enough to hold any arithmetic types
 168    we need to deal with.  */
 169 typedef unsigned long bfd_vma;
 170
 171 /* A generic signed type which is guaranteed to be big enough to hold any
 172    arithmetic types we need to deal with.  Can be assumed to be compatible
 173    with bfd_vma in the same way that signed and unsigned ints are compatible
 174    (as parameters, in assignment, etc).  */
 175 typedef long bfd_signed_vma;
 176
 177 typedef unsigned long symvalue;
 178 typedef unsigned long bfd_size_type;
 179
 180 /* Print a bfd_vma x on stream s.  */
 181 #define fprintf_vma(s,x) fprintf (s, "%08lx", x)
 182 #define sprintf_vma(s,x) sprintf (s, "%08lx", x)
 183
 184 #endif /* not BFD64  */
 185
 186 #define printf_vma(x) fprintf_vma(stdout,x)
 187
 188 typedef unsigned int flagword;  /* 32 bits of flags */
 189 typedef unsigned char bfd_byte;
 190 \f
 191 /** File formats */
 192
 193 typedef enum bfd_format {
 194               bfd_unknown = 0,  /* file format is unknown */
 195               bfd_object,       /* linker/assember/compiler output */
 196               bfd_archive,      /* object archive file */
 197               bfd_core,         /* core dump */
 198               bfd_type_end}     /* marks the end; don't use it! */
 199          bfd_format;
 200
 201 /* Values that may appear in the flags field of a BFD.  These also
 202    appear in the object_flags field of the bfd_target structure, where
 203    they indicate the set of flags used by that backend (not all flags
 204    are meaningful for all object file formats) (FIXME: at the moment,
 205    the object_flags values have mostly just been copied from backend
 206    to another, and are not necessarily correct).  */
 207
 208 /* No flags.  */
 209 #define BFD_NO_FLAGS    0x00
 210
 211 /* BFD contains relocation entries.  */
 212 #define HAS_RELOC       0x01
 213
 214 /* BFD is directly executable.  */
 215 #define EXEC_P          0x02
 216
 217 /* BFD has line number information (basically used for F_LNNO in a
 218    COFF header).  */
 219 #define HAS_LINENO      0x04
 220
 221 /* BFD has debugging information.  */
 222 #define HAS_DEBUG       0x08
 223
 224 /* BFD has symbols.  */
 225 #define HAS_SYMS        0x10
 226
 227 /* BFD has local symbols (basically used for F_LSYMS in a COFF
 228    header).  */
 229 #define HAS_LOCALS      0x20
 230
 231 /* BFD is a dynamic object.  */
 232 #define DYNAMIC         0x40
 233
 234 /* Text section is write protected (if D_PAGED is not set, this is
 235    like an a.out NMAGIC file) (the linker sets this by default, but
 236    clears it for -r or -N).  */
 237 #define WP_TEXT         0x80
 238
 239 /* BFD is dynamically paged (this is like an a.out ZMAGIC file) (the
 240    linker sets this by default, but clears it for -r or -n or -N).  */
 241 #define D_PAGED         0x100
 242
 243 /* BFD is relaxable (this means that bfd_relax_section may be able to
 244    do something) (sometimes bfd_relax_section can do something even if
 245    this is not set).  */
 246 #define BFD_IS_RELAXABLE 0x200
 247
 248 /* This may be set before writing out a BFD to request using a
 249    traditional format.  For example, this is used to request that when
 250    writing out an a.out object the symbols not be hashed to eliminate
 251    duplicates.  */
 252 #define BFD_TRADITIONAL_FORMAT 0x400
 253
 254 /* This flag indicates that the BFD contents are actually cached in
 255    memory.  If this is set, iostream points to a bfd_in_memory struct.  */
 256 #define BFD_IN_MEMORY 0x800
 257 \f
 258 /* symbols and relocation */
 259
 260 /* A count of carsyms (canonical archive symbols).  */
 261 typedef unsigned long symindex;
 262
 263 /* How to perform a relocation.  */
 264 typedef const struct reloc_howto_struct reloc_howto_type;
 265
 266 #define BFD_NO_MORE_SYMBOLS ((symindex) ~0)
 267
 268 /* General purpose part of a symbol X;
 269    target specific parts are in libcoff.h, libaout.h, etc.  */
 270
 271 #define bfd_get_section(x) ((x)->section)
 272 #define bfd_get_output_section(x) ((x)->section->output_section)
 273 #define bfd_set_section(x,y) ((x)->section) = (y)
 274 #define bfd_asymbol_base(x) ((x)->section->vma)
 275 #define bfd_asymbol_value(x) (bfd_asymbol_base(x) + (x)->value)
 276 #define bfd_asymbol_name(x) ((x)->name)
 277 /*Perhaps future: #define bfd_asymbol_bfd(x) ((x)->section->owner)*/
 278 #define bfd_asymbol_bfd(x) ((x)->the_bfd)
 279 #define bfd_asymbol_flavour(x) (bfd_asymbol_bfd(x)->xvec->flavour)
 280
 281 /* A canonical archive symbol.  */
 282 /* This is a type pun with struct ranlib on purpose! */
 283 typedef struct carsym {
 284   char *name;
 285   file_ptr file_offset;         /* look here to find the file */
 286 } carsym;                       /* to make these you call a carsymogen */
 287
 288 /* Used in generating armaps (archive tables of contents).
 289    Perhaps just a forward definition would do? */
 290 struct orl {                    /* output ranlib */
 291   char **name;                  /* symbol name */
 292   file_ptr pos;                 /* bfd* or file position */
 293   int namidx;                   /* index into string table */
 294 };
 295 \f
 296 /* Linenumber stuff */
 297 typedef struct lineno_cache_entry {
 298   unsigned int line_number;     /* Linenumber from start of function*/
 299   union {
 300     struct symbol_cache_entry *sym; /* Function name */
 301     bfd_vma offset;         /* Offset into section */
 302   } u;
 303 } alent;
 304 \f
 305 /* object and core file sections */
 306
 307 #define align_power(addr, align)        \
 308         ( ((addr) + ((1<<(align))-1)) & (-1 << (align)))
 309
 310 typedef struct sec *sec_ptr;
 311
 312 #define bfd_get_section_name(bfd, ptr) ((ptr)->name + 0)
 313 #define bfd_get_section_vma(bfd, ptr) ((ptr)->vma + 0)
 314 #define bfd_get_section_alignment(bfd, ptr) ((ptr)->alignment_power + 0)
 315 #define bfd_section_name(bfd, ptr) ((ptr)->name)
 316 #define bfd_section_size(bfd, ptr) (bfd_get_section_size_before_reloc(ptr))
 317 #define bfd_section_vma(bfd, ptr) ((ptr)->vma)
 318 #define bfd_section_lma(bfd, ptr) ((ptr)->lma)
 319 #define bfd_section_alignment(bfd, ptr) ((ptr)->alignment_power)
 320 #define bfd_get_section_flags(bfd, ptr) ((ptr)->flags + 0)
 321 #define bfd_get_section_userdata(bfd, ptr) ((ptr)->userdata)
 322
 323 #define bfd_is_com_section(ptr) (((ptr)->flags & SEC_IS_COMMON) != 0)
 324
 325 #define bfd_set_section_vma(bfd, ptr, val) (((ptr)->vma = (ptr)->lma= (val)), ((ptr)->user_set_vma = (boolean)true), true)
 326 #define bfd_set_section_alignment(bfd, ptr, val) (((ptr)->alignment_power = (val)),true)
 327 #define bfd_set_section_userdata(bfd, ptr, val) (((ptr)->userdata = (val)),true)
 328
 329 typedef struct stat stat_type;
 330 \f
 331 typedef enum bfd_print_symbol
 332 {
 333   bfd_print_symbol_name,
 334   bfd_print_symbol_more,
 335   bfd_print_symbol_all
 336 } bfd_print_symbol_type;
 337
 338 /* Information about a symbol that nm needs.  */
 339
 340 typedef struct _symbol_info
 341 {
 342   symvalue value;
 343   char type;
 344   CONST char *name;            /* Symbol name.  */
 345   unsigned char stab_type;     /* Stab type.  */
 346   char stab_other;             /* Stab other.  */
 347   short stab_desc;             /* Stab desc.  */
 348   CONST char *stab_name;       /* String for stab type.  */
 349 } symbol_info;
 350
 351 /* Get the name of a stabs type code.  */
 352
 353 extern const char *bfd_get_stab_name PARAMS ((int));
 354 \f
 355 /* Hash table routines.  There is no way to free up a hash table.  */
 356
 357 /* An element in the hash table.  Most uses will actually use a larger
 358    structure, and an instance of this will be the first field.  */
 359
 360 struct bfd_hash_entry
 361 {
 362   /* Next entry for this hash code.  */
 363   struct bfd_hash_entry *next;
 364   /* String being hashed.  */
 365   const char *string;
 366   /* Hash code.  This is the full hash code, not the index into the
 367      table.  */
 368   unsigned long hash;
 369 };
 370
 371 /* A hash table.  */
 372
 373 struct bfd_hash_table
 374 {
 375   /* The hash array.  */
 376   struct bfd_hash_entry **table;
 377   /* The number of slots in the hash table.  */
 378   unsigned int size;
 379   /* A function used to create new elements in the hash table.  The
 380      first entry is itself a pointer to an element.  When this
 381      function is first invoked, this pointer will be NULL.  However,
 382      having the pointer permits a hierarchy of method functions to be
 383      built each of which calls the function in the superclass.  Thus
 384      each function should be written to allocate a new block of memory
 385      only if the argument is NULL.  */
 386   struct bfd_hash_entry *(*newfunc) PARAMS ((struct bfd_hash_entry *,
 387                                              struct bfd_hash_table *,
 388                                              const char *));
 389    /* An objalloc for this hash table.  This is a struct objalloc *,
 390      but we use PTR to avoid requiring the inclusion of objalloc.h.  */
 391   PTR memory;
 392 };
 393
 394 /* Initialize a hash table.  */
 395 extern boolean bfd_hash_table_init
 396   PARAMS ((struct bfd_hash_table *,
 397            struct bfd_hash_entry *(*) (struct bfd_hash_entry *,
 398                                        struct bfd_hash_table *,
 399                                        const char *)));
 400
 401 /* Initialize a hash table specifying a size.  */
 402 extern boolean bfd_hash_table_init_n
 403   PARAMS ((struct bfd_hash_table *,
 404            struct bfd_hash_entry *(*) (struct bfd_hash_entry *,
 405                                        struct bfd_hash_table *,
 406                                        const char *),
 407            unsigned int size));
 408
 409 /* Free up a hash table.  */
 410 extern void bfd_hash_table_free PARAMS ((struct bfd_hash_table *));
 411
 412 /* Look up a string in a hash table.  If CREATE is true, a new entry
 413    will be created for this string if one does not already exist.  The
 414    COPY argument must be true if this routine should copy the string
 415    into newly allocated memory when adding an entry.  */
 416 extern struct bfd_hash_entry *bfd_hash_lookup
 417   PARAMS ((struct bfd_hash_table *, const char *, boolean create,
 418            boolean copy));
 419
 420 /* Replace an entry in a hash table.  */
 421 extern void bfd_hash_replace
 422   PARAMS ((struct bfd_hash_table *, struct bfd_hash_entry *old,
 423            struct bfd_hash_entry *nw));
 424
 425 /* Base method for creating a hash table entry.  */
 426 extern struct bfd_hash_entry *bfd_hash_newfunc
 427   PARAMS ((struct bfd_hash_entry *, struct bfd_hash_table *,
 428            const char *));
 429
 430 /* Grab some space for a hash table entry.  */
 431 extern PTR bfd_hash_allocate PARAMS ((struct bfd_hash_table *,
 432                                       unsigned int));
 433
 434 /* Traverse a hash table in a random order, calling a function on each
 435    element.  If the function returns false, the traversal stops.  The
 436    INFO argument is passed to the function.  */
 437 extern void bfd_hash_traverse PARAMS ((struct bfd_hash_table *,
 438                                        boolean (*) (struct bfd_hash_entry *,
 439                                                     PTR),
 440                                        PTR info));
 441 \f
 442 /* Semi-portable string concatenation in cpp.
 443    The CAT4 hack is to avoid a problem with some strict ANSI C preprocessors.
 444    The problem is, "32_" is not a valid preprocessing token, and we don't
 445    want extra underscores (e.g., "nlm_32_").  The XCAT2 macro will cause the
 446    inner CAT macros to be evaluated first, producing still-valid pp-tokens.
 447    Then the final concatenation can be done.  (Sigh.)  */
 448 #ifndef CAT
 449 #ifdef SABER
 450 #define CAT(a,b)        a##b
 451 #define CAT3(a,b,c)     a##b##c
 452 #define CAT4(a,b,c,d)   a##b##c##d
 453 #else
 454 #if defined(__STDC__) || defined(ALMOST_STDC)
 455 #define CAT(a,b) a##b
 456 #define CAT3(a,b,c) a##b##c
 457 #define XCAT2(a,b)      CAT(a,b)
 458 #define CAT4(a,b,c,d)   XCAT2(CAT(a,b),CAT(c,d))
 459 #else
 460 #define CAT(a,b) a/**/b
 461 #define CAT3(a,b,c) a/**/b/**/c
 462 #define CAT4(a,b,c,d)   a/**/b/**/c/**/d
 463 #endif
 464 #endif
 465 #endif
 466
 467 #define COFF_SWAP_TABLE (PTR) &bfd_coff_std_swap_table
 468 \f
 469 /* User program access to BFD facilities */
 470
 471 /* Direct I/O routines, for programs which know more about the object
 472    file than BFD does.  Use higher level routines if possible.  */
 473
 474 extern bfd_size_type bfd_read
 475   PARAMS ((PTR, bfd_size_type size, bfd_size_type nitems, bfd *abfd));
 476 extern bfd_size_type bfd_write
 477   PARAMS ((const PTR, bfd_size_type size, bfd_size_type nitems, bfd *abfd));
 478 extern int bfd_seek PARAMS ((bfd *abfd, file_ptr fp, int direction));
 479 extern long bfd_tell PARAMS ((bfd *abfd));
 480 extern int bfd_flush PARAMS ((bfd *abfd));
 481 extern int bfd_stat PARAMS ((bfd *abfd, struct stat *));
 482
 483 /* Cast from const char * to char * so that caller can assign to
 484    a char * without a warning.  */
 485 #define bfd_get_filename(abfd) ((char *) (abfd)->filename)
 486 #define bfd_get_cacheable(abfd) ((abfd)->cacheable)
 487 #define bfd_get_format(abfd) ((abfd)->format)
 488 #define bfd_get_target(abfd) ((abfd)->xvec->name)
 489 #define bfd_get_flavour(abfd) ((abfd)->xvec->flavour)
 490 #define bfd_family_coff(abfd) \
 491   (bfd_get_flavour (abfd) == bfd_target_coff_flavour || \
 492    bfd_get_flavour (abfd) == bfd_target_xcoff_flavour)
 493 #define bfd_big_endian(abfd) ((abfd)->xvec->byteorder == BFD_ENDIAN_BIG)
 494 #define bfd_little_endian(abfd) ((abfd)->xvec->byteorder == BFD_ENDIAN_LITTLE)
 495 #define bfd_header_big_endian(abfd) \
 496   ((abfd)->xvec->header_byteorder == BFD_ENDIAN_BIG)
 497 #define bfd_header_little_endian(abfd) \
 498   ((abfd)->xvec->header_byteorder == BFD_ENDIAN_LITTLE)
 499 #define bfd_get_file_flags(abfd) ((abfd)->flags)
 500 #define bfd_applicable_file_flags(abfd) ((abfd)->xvec->object_flags)
 501 #define bfd_applicable_section_flags(abfd) ((abfd)->xvec->section_flags)
 502 #define bfd_my_archive(abfd) ((abfd)->my_archive)
 503 #define bfd_has_map(abfd) ((abfd)->has_armap)
 504
 505 #define bfd_valid_reloc_types(abfd) ((abfd)->xvec->valid_reloc_types)
 506 #define bfd_usrdata(abfd) ((abfd)->usrdata)
 507
 508 #define bfd_get_start_address(abfd) ((abfd)->start_address)
 509 #define bfd_get_symcount(abfd) ((abfd)->symcount)
 510 #define bfd_get_outsymbols(abfd) ((abfd)->outsymbols)
 511 #define bfd_count_sections(abfd) ((abfd)->section_count)
 512
 513 #define bfd_get_symbol_leading_char(abfd) ((abfd)->xvec->symbol_leading_char)
 514
 515 #define bfd_set_cacheable(abfd,bool) (((abfd)->cacheable = (boolean) (bool)), true)
 516
 517 extern boolean bfd_cache_close PARAMS ((bfd *abfd));
 518 /* NB: This declaration should match the autogenerated one in libbfd.h.  */
 519
 520 extern boolean bfd_record_phdr
 521   PARAMS ((bfd *, unsigned long, boolean, flagword, boolean, bfd_vma,
 522            boolean, boolean, unsigned int, struct sec **));
 523
 524 /* Byte swapping routines.  */
 525
 526 bfd_vma         bfd_getb64         PARAMS ((const unsigned char *));
 527 bfd_vma         bfd_getl64         PARAMS ((const unsigned char *));
 528 bfd_signed_vma  bfd_getb_signed_64 PARAMS ((const unsigned char *));
 529 bfd_signed_vma  bfd_getl_signed_64 PARAMS ((const unsigned char *));
 530 bfd_vma         bfd_getb32         PARAMS ((const unsigned char *));
 531 bfd_vma         bfd_getl32         PARAMS ((const unsigned char *));
 532 bfd_signed_vma  bfd_getb_signed_32 PARAMS ((const unsigned char *));
 533 bfd_signed_vma  bfd_getl_signed_32 PARAMS ((const unsigned char *));
 534 bfd_vma         bfd_getb16         PARAMS ((const unsigned char *));
 535 bfd_vma         bfd_getl16         PARAMS ((const unsigned char *));
 536 bfd_signed_vma  bfd_getb_signed_16 PARAMS ((const unsigned char *));
 537 bfd_signed_vma  bfd_getl_signed_16 PARAMS ((const unsigned char *));
 538 void            bfd_putb64         PARAMS ((bfd_vma, unsigned char *));
 539 void            bfd_putl64         PARAMS ((bfd_vma, unsigned char *));
 540 void            bfd_putb32         PARAMS ((bfd_vma, unsigned char *));
 541 void            bfd_putl32         PARAMS ((bfd_vma, unsigned char *));
 542 void            bfd_putb16         PARAMS ((bfd_vma, unsigned char *));
 543 void            bfd_putl16         PARAMS ((bfd_vma, unsigned char *));
 544
 545 /* Byte swapping routines which take size and endiannes as arguments.  */
 546
 547 bfd_vma         bfd_get_bits       PARAMS ((bfd_byte *, int, boolean));
 548 void            bfd_put_bits       PARAMS ((bfd_vma, bfd_byte *, int, boolean));
 549 \f
 550 /* Externally visible ECOFF routines.  */
 551
 552 #if defined(__STDC__) || defined(ALMOST_STDC)
 553 struct ecoff_debug_info;
 554 struct ecoff_debug_swap;
 555 struct ecoff_extr;
 556 struct symbol_cache_entry;
 557 struct bfd_link_info;
 558 struct bfd_link_hash_entry;
 559 struct bfd_elf_version_tree;
 560 #endif
 561 extern bfd_vma bfd_ecoff_get_gp_value PARAMS ((bfd * abfd));
 562 extern boolean bfd_ecoff_set_gp_value PARAMS ((bfd *abfd, bfd_vma gp_value));
 563 extern boolean bfd_ecoff_set_regmasks
 564   PARAMS ((bfd *abfd, unsigned long gprmask, unsigned long fprmask,
 565            unsigned long *cprmask));
 566 extern PTR bfd_ecoff_debug_init
 567   PARAMS ((bfd *output_bfd, struct ecoff_debug_info *output_debug,
 568            const struct ecoff_debug_swap *output_swap,
 569            struct bfd_link_info *));
 570 extern void bfd_ecoff_debug_free
 571   PARAMS ((PTR handle, bfd *output_bfd, struct ecoff_debug_info *output_debug,
 572            const struct ecoff_debug_swap *output_swap,
 573            struct bfd_link_info *));
 574 extern boolean bfd_ecoff_debug_accumulate
 575   PARAMS ((PTR handle, bfd *output_bfd, struct ecoff_debug_info *output_debug,
 576            const struct ecoff_debug_swap *output_swap,
 577            bfd *input_bfd, struct ecoff_debug_info *input_debug,
 578            const struct ecoff_debug_swap *input_swap,
 579            struct bfd_link_info *));
 580 extern boolean bfd_ecoff_debug_accumulate_other
 581   PARAMS ((PTR handle, bfd *output_bfd, struct ecoff_debug_info *output_debug,
 582            const struct ecoff_debug_swap *output_swap, bfd *input_bfd,
 583            struct bfd_link_info *));
 584 extern boolean bfd_ecoff_debug_externals
 585   PARAMS ((bfd *abfd, struct ecoff_debug_info *debug,
 586            const struct ecoff_debug_swap *swap,
 587            boolean relocateable,
 588            boolean (*get_extr) (struct symbol_cache_entry *,
 589                                 struct ecoff_extr *),
 590            void (*set_index) (struct symbol_cache_entry *,
 591                               bfd_size_type)));
 592 extern boolean bfd_ecoff_debug_one_external
 593   PARAMS ((bfd *abfd, struct ecoff_debug_info *debug,
 594            const struct ecoff_debug_swap *swap,
 595            const char *name, struct ecoff_extr *esym));
 596 extern bfd_size_type bfd_ecoff_debug_size
 597   PARAMS ((bfd *abfd, struct ecoff_debug_info *debug,
 598            const struct ecoff_debug_swap *swap));
 599 extern boolean bfd_ecoff_write_debug
 600   PARAMS ((bfd *abfd, struct ecoff_debug_info *debug,
 601            const struct ecoff_debug_swap *swap, file_ptr where));
 602 extern boolean bfd_ecoff_write_accumulated_debug
 603   PARAMS ((PTR handle, bfd *abfd, struct ecoff_debug_info *debug,
 604            const struct ecoff_debug_swap *swap,
 605            struct bfd_link_info *info, file_ptr where));
 606 extern boolean bfd_mips_ecoff_create_embedded_relocs
 607   PARAMS ((bfd *, struct bfd_link_info *, struct sec *, struct sec *,
 608            char **));
 609
 610 /* Externally visible ELF routines.  */
 611
 612 struct bfd_link_needed_list
 613 {
 614   struct bfd_link_needed_list *next;
 615   bfd *by;
 616   const char *name;
 617 };
 618
 619 extern boolean bfd_elf32_record_link_assignment
 620   PARAMS ((bfd *, struct bfd_link_info *, const char *, boolean));
 621 extern boolean bfd_elf64_record_link_assignment
 622   PARAMS ((bfd *, struct bfd_link_info *, const char *, boolean));
 623 extern struct bfd_link_needed_list *bfd_elf_get_needed_list
 624   PARAMS ((bfd *, struct bfd_link_info *));
 625 extern boolean bfd_elf_get_bfd_needed_list
 626   PARAMS ((bfd *, struct bfd_link_needed_list **));
 627 extern boolean bfd_elf32_size_dynamic_sections
 628   PARAMS ((bfd *, const char *, const char *, const char *,
 629            const char * const *, struct bfd_link_info *, struct sec **,
 630            struct bfd_elf_version_tree *));
 631 extern boolean bfd_elf64_size_dynamic_sections
 632   PARAMS ((bfd *, const char *, const char *, const char *,
 633            const char * const *, struct bfd_link_info *, struct sec **,
 634            struct bfd_elf_version_tree *));
 635 extern void bfd_elf_set_dt_needed_name PARAMS ((bfd *, const char *));
 636 extern void bfd_elf_set_dt_needed_soname PARAMS ((bfd *, const char *));
 637 extern const char *bfd_elf_get_dt_soname PARAMS ((bfd *));
 638 extern struct bfd_link_needed_list *bfd_elf_get_runpath_list
 639   PARAMS ((bfd *, struct bfd_link_info *));
 640
 641 /* Return an upper bound on the number of bytes required to store a
 642    copy of ABFD's program header table entries.  Return -1 if an error
 643    occurs; bfd_get_error will return an appropriate code.  */
 644 extern long bfd_get_elf_phdr_upper_bound PARAMS ((bfd *abfd));
 645
 646 /* Copy ABFD's program header table entries to *PHDRS.  The entries
 647    will be stored as an array of Elf_Internal_Phdr structures, as
 648    defined in include/elf/internal.h.  To find out how large the
 649    buffer needs to be, call bfd_get_elf_phdr_upper_bound.
 650
 651    Return the number of program header table entries read, or -1 if an
 652    error occurs; bfd_get_error will return an appropriate code.  */
 653 extern int bfd_get_elf_phdrs PARAMS ((bfd *abfd, void *phdrs));
 654
 655 /* Return the arch_size field of an elf bfd, or -1 if not elf.  */
 656 extern int bfd_get_arch_size PARAMS ((bfd *));
 657
 658 /* Return true if address "naturally" sign extends, or -1 if not elf.  */
 659 extern int bfd_get_sign_extend_vma PARAMS ((bfd *));
 660
 661 extern boolean bfd_m68k_elf32_create_embedded_relocs
 662   PARAMS ((bfd *, struct bfd_link_info *, struct sec *, struct sec *,
 663            char **));
 664
 665 /* SunOS shared library support routines for the linker.  */
 666
 667 extern struct bfd_link_needed_list *bfd_sunos_get_needed_list
 668   PARAMS ((bfd *, struct bfd_link_info *));
 669 extern boolean bfd_sunos_record_link_assignment
 670   PARAMS ((bfd *, struct bfd_link_info *, const char *));
 671 extern boolean bfd_sunos_size_dynamic_sections
 672   PARAMS ((bfd *, struct bfd_link_info *, struct sec **, struct sec **,
 673            struct sec **));
 674
 675 /* Linux shared library support routines for the linker.  */
 676
 677 extern boolean bfd_i386linux_size_dynamic_sections
 678   PARAMS ((bfd *, struct bfd_link_info *));
 679 extern boolean bfd_m68klinux_size_dynamic_sections
 680   PARAMS ((bfd *, struct bfd_link_info *));
 681 extern boolean bfd_sparclinux_size_dynamic_sections
 682   PARAMS ((bfd *, struct bfd_link_info *));
 683
 684 /* mmap hacks */
 685
 686 struct _bfd_window_internal;
 687 typedef struct _bfd_window_internal bfd_window_internal;
 688
 689 typedef struct _bfd_window {
 690   /* What the user asked for.  */
 691   PTR data;
 692   bfd_size_type size;
 693   /* The actual window used by BFD.  Small user-requested read-only
 694      regions sharing a page may share a single window into the object
 695      file.  Read-write versions shouldn't until I've fixed things to
 696      keep track of which portions have been claimed by the
 697      application; don't want to give the same region back when the
 698      application wants two writable copies!  */
 699   struct _bfd_window_internal *i;
 700 } bfd_window;
 701
 702 extern void bfd_init_window PARAMS ((bfd_window *));
 703 extern void bfd_free_window PARAMS ((bfd_window *));
 704 extern boolean bfd_get_file_window
 705   PARAMS ((bfd *, file_ptr, bfd_size_type, bfd_window *, boolean));
 706
 707 /* XCOFF support routines for the linker.  */
 708
 709 extern boolean bfd_xcoff_link_record_set
 710   PARAMS ((bfd *, struct bfd_link_info *, struct bfd_link_hash_entry *,
 711            bfd_size_type));
 712 extern boolean bfd_xcoff_import_symbol
 713   PARAMS ((bfd *, struct bfd_link_info *, struct bfd_link_hash_entry *,
 714            bfd_vma, const char *, const char *, const char *));
 715 extern boolean bfd_xcoff_export_symbol
 716   PARAMS ((bfd *, struct bfd_link_info *, struct bfd_link_hash_entry *,
 717            boolean));
 718 extern boolean bfd_xcoff_link_count_reloc
 719   PARAMS ((bfd *, struct bfd_link_info *, const char *));
 720 extern boolean bfd_xcoff_record_link_assignment
 721   PARAMS ((bfd *, struct bfd_link_info *, const char *));
 722 extern boolean bfd_xcoff_size_dynamic_sections
 723   PARAMS ((bfd *, struct bfd_link_info *, const char *, const char *,
 724            unsigned long, unsigned long, unsigned long, boolean,
 725            int, boolean, boolean, struct sec **));
 726
 727 /* Externally visible COFF routines.  */
 728
 729 #if defined(__STDC__) || defined(ALMOST_STDC)
 730 struct internal_syment;
 731 union internal_auxent;
 732 #endif
 733
 734 extern boolean bfd_coff_get_syment
 735   PARAMS ((bfd *, struct symbol_cache_entry *, struct internal_syment *));
 736
 737 extern boolean bfd_coff_get_auxent
 738   PARAMS ((bfd *, struct symbol_cache_entry *, int, union internal_auxent *));
 739
 740 extern boolean bfd_coff_set_symbol_class
 741   PARAMS ((bfd *, struct symbol_cache_entry *, unsigned int));
 742
 743 extern boolean bfd_m68k_coff_create_embedded_relocs
 744   PARAMS ((bfd *, struct bfd_link_info *, struct sec *, struct sec *,
 745            char **));
 746
 747 /* ARM Interworking support.  Called from linker.  */
 748 extern boolean bfd_arm_allocate_interworking_sections
 749   PARAMS ((struct bfd_link_info *));
 750
 751 extern boolean bfd_arm_process_before_allocation
 752   PARAMS ((bfd *, struct bfd_link_info *, int));
 753
 754 extern boolean bfd_arm_get_bfd_for_interworking
 755   PARAMS ((bfd *, struct bfd_link_info *));
 756
 757 /* PE ARM Interworking support.  Called from linker.  */
 758 extern boolean bfd_arm_pe_allocate_interworking_sections
 759   PARAMS ((struct bfd_link_info *));
 760
 761 extern boolean bfd_arm_pe_process_before_allocation
 762   PARAMS ((bfd *, struct bfd_link_info *, int));
 763
 764 extern boolean bfd_arm_pe_get_bfd_for_interworking
 765   PARAMS ((bfd *, struct bfd_link_info *));
 766
 767 /* ELF ARM Interworking support.  Called from linker.  */
 768 extern boolean bfd_elf32_arm_allocate_interworking_sections
 769   PARAMS ((struct bfd_link_info *));
 770
 771 extern boolean bfd_elf32_arm_process_before_allocation
 772   PARAMS ((bfd *, struct bfd_link_info *, int));
 773
 774 extern boolean bfd_elf32_arm_get_bfd_for_interworking
 775   PARAMS ((bfd *, struct bfd_link_info *));
 776
 777 /* TI COFF load page support.  */
 778 extern void bfd_ticoff_set_section_load_page
 779   PARAMS ((struct sec *, int));
 780
 781 extern int bfd_ticoff_get_section_load_page
 782   PARAMS ((struct sec *));
 783
 784 /* And more from the source.  */
 785 void
 786 bfd_init PARAMS ((void));
 787
 788 bfd *
 789 bfd_openr PARAMS ((CONST char *filename, CONST char *target));
 790
 791 bfd *
 792 bfd_fdopenr PARAMS ((CONST char *filename, CONST char *target, int fd));
 793
 794 bfd *
 795 bfd_openstreamr PARAMS ((const char *, const char *, PTR));
 796
 797 bfd *
 798 bfd_openw PARAMS ((CONST char *filename, CONST char *target));
 799
 800 boolean
 801 bfd_close PARAMS ((bfd *abfd));
 802
 803 boolean
 804 bfd_close_all_done PARAMS ((bfd *));
 805
 806 bfd *
 807 bfd_create PARAMS ((CONST char *filename, bfd *templ));
 808
 809 boolean
 810 bfd_make_writable PARAMS ((bfd *abfd));
 811
 812 boolean
 813 bfd_make_readable PARAMS ((bfd *abfd));
 814
 815
 816 /* Byte swapping macros for user section data.  */
 817
 818 #define bfd_put_8(abfd, val, ptr) \
 819                 ((void) (*((unsigned char *) (ptr)) = (unsigned char) (val)))
 820 #define bfd_put_signed_8 \
 821                bfd_put_8
 822 #define bfd_get_8(abfd, ptr) \
 823                 (*(unsigned char *) (ptr))
 824 #define bfd_get_signed_8(abfd, ptr) \
 825                ((*(unsigned char *) (ptr) ^ 0x80) - 0x80)
 826
 827 #define bfd_put_16(abfd, val, ptr) \
 828                 BFD_SEND(abfd, bfd_putx16, ((val),(ptr)))
 829 #define bfd_put_signed_16 \
 830                 bfd_put_16
 831 #define bfd_get_16(abfd, ptr) \
 832                 BFD_SEND(abfd, bfd_getx16, (ptr))
 833 #define bfd_get_signed_16(abfd, ptr) \
 834                 BFD_SEND (abfd, bfd_getx_signed_16, (ptr))
 835
 836 #define bfd_put_32(abfd, val, ptr) \
 837                 BFD_SEND(abfd, bfd_putx32, ((val),(ptr)))
 838 #define bfd_put_signed_32 \
 839                 bfd_put_32
 840 #define bfd_get_32(abfd, ptr) \
 841                 BFD_SEND(abfd, bfd_getx32, (ptr))
 842 #define bfd_get_signed_32(abfd, ptr) \
 843                 BFD_SEND(abfd, bfd_getx_signed_32, (ptr))
 844
 845 #define bfd_put_64(abfd, val, ptr) \
 846                 BFD_SEND(abfd, bfd_putx64, ((val), (ptr)))
 847 #define bfd_put_signed_64 \
 848                 bfd_put_64
 849 #define bfd_get_64(abfd, ptr) \
 850                 BFD_SEND(abfd, bfd_getx64, (ptr))
 851 #define bfd_get_signed_64(abfd, ptr) \
 852                 BFD_SEND(abfd, bfd_getx_signed_64, (ptr))
 853
 854 #define bfd_get(bits, abfd, ptr)                               \
 855                 ((bits) == 8 ? bfd_get_8 (abfd, ptr)           \
 856                 : (bits) == 16 ? bfd_get_16 (abfd, ptr)        \
 857                 : (bits) == 32 ? bfd_get_32 (abfd, ptr)        \
 858                 : (bits) == 64 ? bfd_get_64 (abfd, ptr)        \
 859                 : (abort (), (bfd_vma) - 1))
 860
 861 #define bfd_put(bits, abfd, val, ptr)                          \
 862                 ((bits) == 8 ? bfd_put_8 (abfd, val, ptr)      \
 863                 : (bits) == 16 ? bfd_put_16 (abfd, val, ptr)   \
 864                 : (bits) == 32 ? bfd_put_32 (abfd, val, ptr)   \
 865                 : (bits) == 64 ? bfd_put_64 (abfd, val, ptr)   \
 866                 : (abort (), (void) 0))
 867
 868
 869 /* Byte swapping macros for file header data.  */
 870
 871 #define bfd_h_put_8(abfd, val, ptr) \
 872                bfd_put_8 (abfd, val, ptr)
 873 #define bfd_h_put_signed_8(abfd, val, ptr) \
 874                bfd_put_8 (abfd, val, ptr)
 875 #define bfd_h_get_8(abfd, ptr) \
 876                bfd_get_8 (abfd, ptr)
 877 #define bfd_h_get_signed_8(abfd, ptr) \
 878                bfd_get_signed_8 (abfd, ptr)
 879
 880 #define bfd_h_put_16(abfd, val, ptr) \
 881                 BFD_SEND(abfd, bfd_h_putx16,(val,ptr))
 882 #define bfd_h_put_signed_16 \
 883                 bfd_h_put_16
 884 #define bfd_h_get_16(abfd, ptr) \
 885                 BFD_SEND(abfd, bfd_h_getx16,(ptr))
 886 #define bfd_h_get_signed_16(abfd, ptr) \
 887                 BFD_SEND(abfd, bfd_h_getx_signed_16, (ptr))
 888
 889 #define bfd_h_put_32(abfd, val, ptr) \
 890                 BFD_SEND(abfd, bfd_h_putx32,(val,ptr))
 891 #define bfd_h_put_signed_32 \
 892                 bfd_h_put_32
 893 #define bfd_h_get_32(abfd, ptr) \
 894                 BFD_SEND(abfd, bfd_h_getx32,(ptr))
 895 #define bfd_h_get_signed_32(abfd, ptr) \
 896                 BFD_SEND(abfd, bfd_h_getx_signed_32, (ptr))
 897
 898 #define bfd_h_put_64(abfd, val, ptr) \
 899                 BFD_SEND(abfd, bfd_h_putx64,(val, ptr))
 900 #define bfd_h_put_signed_64 \
 901                 bfd_h_put_64
 902 #define bfd_h_get_64(abfd, ptr) \
 903                 BFD_SEND(abfd, bfd_h_getx64,(ptr))
 904 #define bfd_h_get_signed_64(abfd, ptr) \
 905                 BFD_SEND(abfd, bfd_h_getx_signed_64, (ptr))
 906
 907 /* This structure is used for a comdat section, as in PE.  A comdat
 908    section is associated with a particular symbol.  When the linker
 909    sees a comdat section, it keeps only one of the sections with a
 910    given name and associated with a given symbol.  */
 911
 912 struct bfd_comdat_info
 913 {
 914   /* The name of the symbol associated with a comdat section.  */
 915   const char *name;
 916
 917   /* The local symbol table index of the symbol associated with a
 918      comdat section.  This is only meaningful to the object file format
 919      specific code; it is not an index into the list returned by
 920      bfd_canonicalize_symtab.  */
 921   long symbol;
 922 };
 923
 924 typedef struct sec
 925 {
 926   /* The name of the section; the name isn't a copy, the pointer is
 927      the same as that passed to bfd_make_section.  */
 928
 929   const char *name;
 930
 931   /* A unique sequence number.  */
 932
 933   int id;
 934
 935   /* Which section is it; 0..nth.  */
 936
 937   int index;
 938
 939   /* The next section in the list belonging to the BFD, or NULL.  */
 940
 941   struct sec *next;
 942
 943   /* The field flags contains attributes of the section. Some
 944      flags are read in from the object file, and some are
 945      synthesized from other information.  */
 946
 947   flagword flags;
 948
 949 #define SEC_NO_FLAGS   0x000
 950
 951   /* Tells the OS to allocate space for this section when loading.
 952      This is clear for a section containing debug information only.  */
 953 #define SEC_ALLOC      0x001
 954
 955   /* Tells the OS to load the section from the file when loading.
 956      This is clear for a .bss section.  */
 957 #define SEC_LOAD       0x002
 958
 959   /* The section contains data still to be relocated, so there is
 960      some relocation information too.  */
 961 #define SEC_RELOC      0x004
 962
 963 #if 0   /* Obsolete ? */
 964 #define SEC_BALIGN     0x008
 965 #endif
 966
 967   /* A signal to the OS that the section contains read only data.  */
 968 #define SEC_READONLY   0x010
 969
 970   /* The section contains code only.  */
 971 #define SEC_CODE       0x020
 972
 973   /* The section contains data only.  */
 974 #define SEC_DATA       0x040
 975
 976   /* The section will reside in ROM.  */
 977 #define SEC_ROM        0x080
 978
 979   /* The section contains constructor information. This section
 980      type is used by the linker to create lists of constructors and
 981      destructors used by <<g++>>. When a back end sees a symbol
 982      which should be used in a constructor list, it creates a new
 983      section for the type of name (e.g., <<__CTOR_LIST__>>), attaches
 984      the symbol to it, and builds a relocation. To build the lists
 985      of constructors, all the linker has to do is catenate all the
 986      sections called <<__CTOR_LIST__>> and relocate the data
 987      contained within - exactly the operations it would peform on
 988      standard data.  */
 989 #define SEC_CONSTRUCTOR 0x100
 990
 991   /* The section is a constructor, and should be placed at the
 992      end of the text, data, or bss section(?).  */
 993 #define SEC_CONSTRUCTOR_TEXT 0x1100
 994 #define SEC_CONSTRUCTOR_DATA 0x2100
 995 #define SEC_CONSTRUCTOR_BSS  0x3100
 996
 997   /* The section has contents - a data section could be
 998      <<SEC_ALLOC>> | <<SEC_HAS_CONTENTS>>; a debug section could be
 999      <<SEC_HAS_CONTENTS>>  */
1000 #define SEC_HAS_CONTENTS 0x200
1001
1002   /* An instruction to the linker to not output the section
1003      even if it has information which would normally be written.  */
1004 #define SEC_NEVER_LOAD 0x400
1005
1006   /* The section is a COFF shared library section.  This flag is
1007      only for the linker.  If this type of section appears in
1008      the input file, the linker must copy it to the output file
1009      without changing the vma or size.  FIXME: Although this
1010      was originally intended to be general, it really is COFF
1011      specific (and the flag was renamed to indicate this).  It
1012      might be cleaner to have some more general mechanism to
1013      allow the back end to control what the linker does with
1014      sections.  */
1015 #define SEC_COFF_SHARED_LIBRARY 0x800
1016
1017   /* The section has GOT references.  This flag is only for the
1018      linker, and is currently only used by the elf32-hppa back end.
1019      It will be set if global offset table references were detected
1020      in this section, which indicate to the linker that the section
1021      contains PIC code, and must be handled specially when doing a
1022      static link.  */
1023 #define SEC_HAS_GOT_REF 0x4000
1024
1025   /* The section contains common symbols (symbols may be defined
1026      multiple times, the value of a symbol is the amount of
1027      space it requires, and the largest symbol value is the one
1028      used).  Most targets have exactly one of these (which we
1029      translate to bfd_com_section_ptr), but ECOFF has two.  */
1030 #define SEC_IS_COMMON 0x8000
1031
1032   /* The section contains only debugging information.  For
1033      example, this is set for ELF .debug and .stab sections.
1034      strip tests this flag to see if a section can be
1035      discarded.  */
1036 #define SEC_DEBUGGING 0x10000
1037
1038   /* The contents of this section are held in memory pointed to
1039      by the contents field.  This is checked by bfd_get_section_contents,
1040      and the data is retrieved from memory if appropriate.  */
1041 #define SEC_IN_MEMORY 0x20000
1042
1043   /* The contents of this section are to be excluded by the
1044      linker for executable and shared objects unless those
1045      objects are to be further relocated.  */
1046 #define SEC_EXCLUDE 0x40000
1047
1048   /* The contents of this section are to be sorted by the
1049      based on the address specified in the associated symbol
1050      table.  */
1051 #define SEC_SORT_ENTRIES 0x80000
1052
1053   /* When linking, duplicate sections of the same name should be
1054      discarded, rather than being combined into a single section as
1055      is usually done.  This is similar to how common symbols are
1056      handled.  See SEC_LINK_DUPLICATES below.  */
1057 #define SEC_LINK_ONCE 0x100000
1058
1059   /* If SEC_LINK_ONCE is set, this bitfield describes how the linker
1060      should handle duplicate sections.  */
1061 #define SEC_LINK_DUPLICATES 0x600000
1062
1063   /* This value for SEC_LINK_DUPLICATES means that duplicate
1064      sections with the same name should simply be discarded.  */
1065 #define SEC_LINK_DUPLICATES_DISCARD 0x0
1066
1067   /* This value for SEC_LINK_DUPLICATES means that the linker
1068      should warn if there are any duplicate sections, although
1069      it should still only link one copy.  */
1070 #define SEC_LINK_DUPLICATES_ONE_ONLY 0x200000
1071
1072   /* This value for SEC_LINK_DUPLICATES means that the linker
1073      should warn if any duplicate sections are a different size.  */
1074 #define SEC_LINK_DUPLICATES_SAME_SIZE 0x400000
1075
1076   /* This value for SEC_LINK_DUPLICATES means that the linker
1077      should warn if any duplicate sections contain different
1078      contents.  */
1079 #define SEC_LINK_DUPLICATES_SAME_CONTENTS 0x600000
1080
1081   /* This section was created by the linker as part of dynamic
1082      relocation or other arcane processing.  It is skipped when
1083      going through the first-pass output, trusting that someone
1084      else up the line will take care of it later.  */
1085 #define SEC_LINKER_CREATED 0x800000
1086
1087   /* This section should not be subject to garbage collection.  */
1088 #define SEC_KEEP 0x1000000
1089
1090   /* This section contains "short" data, and should be placed
1091      "near" the GP.  */
1092 #define SEC_SMALL_DATA 0x2000000
1093
1094   /* This section contains data which may be shared with other
1095      executables or shared objects.  */
1096 #define SEC_SHARED 0x4000000
1097
1098   /* When a section with this flag is being linked, then if the size of
1099      the input section is less than a page, it should not cross a page
1100      boundary.  If the size of the input section is one page or more, it
1101      should be aligned on a page boundary.  */
1102 #define SEC_BLOCK 0x8000000
1103
1104   /* Conditionally link this section; do not link if there are no
1105      references found to any symbol in the section.  */
1106 #define SEC_CLINK 0x10000000
1107
1108   /* Attempt to merge identical entities in the section.
1109      Entity size is given in the entsize field.  */
1110 #define SEC_MERGE 0x20000000
1111
1112   /* If given with SEC_MERGE, entities to merge are zero terminated
1113      strings where entsize specifies character size instead of fixed
1114      size entries.  */
1115 #define SEC_STRINGS 0x40000000
1116
1117   /*  End of section flags.  */
1118
1119   /* Some internal packed boolean fields.  */
1120
1121   /* See the vma field.  */
1122   unsigned int user_set_vma : 1;
1123
1124   /* Whether relocations have been processed.  */
1125   unsigned int reloc_done : 1;
1126
1127   /* A mark flag used by some of the linker backends.  */
1128   unsigned int linker_mark : 1;
1129
1130   /* Another mark flag used by some of the linker backends.  Set for
1131      output sections that have a input section.  */
1132   unsigned int linker_has_input : 1;
1133
1134   /* A mark flag used by some linker backends for garbage collection.  */
1135   unsigned int gc_mark : 1;
1136
1137   /* Used by the ELF code to mark sections which have been allocated to segments.  */
1138   unsigned int segment_mark : 1;
1139
1140   /* End of internal packed boolean fields.  */
1141
1142   /*  The virtual memory address of the section - where it will be
1143       at run time.  The symbols are relocated against this.  The
1144       user_set_vma flag is maintained by bfd; if it's not set, the
1145       backend can assign addresses (for example, in <<a.out>>, where
1146       the default address for <<.data>> is dependent on the specific
1147       target and various flags).  */
1148
1149   bfd_vma vma;
1150
1151   /*  The load address of the section - where it would be in a
1152       rom image; really only used for writing section header
1153       information. */
1154
1155   bfd_vma lma;
1156
1157   /* The size of the section in octets, as it will be output.
1158      Contains a value even if the section has no contents (e.g., the
1159      size of <<.bss>>).  This will be filled in after relocation.  */
1160
1161   bfd_size_type _cooked_size;
1162
1163   /* The original size on disk of the section, in octets.  Normally this
1164      value is the same as the size, but if some relaxing has
1165      been done, then this value will be bigger.  */
1166
1167   bfd_size_type _raw_size;
1168
1169   /* If this section is going to be output, then this value is the
1170      offset in *bytes* into the output section of the first byte in the
1171      input section (byte ==> smallest addressable unit on the
1172      target).  In most cases, if this was going to start at the
1173      100th octet (8-bit quantity) in the output section, this value
1174      would be 100.  However, if the target byte size is 16 bits
1175      (bfd_octets_per_byte is "2"), this value would be 50.  */
1176
1177   bfd_vma output_offset;
1178
1179   /* The output section through which to map on output.  */
1180
1181   struct sec *output_section;
1182
1183   /* The alignment requirement of the section, as an exponent of 2 -
1184      e.g., 3 aligns to 2^3 (or 8).  */
1185
1186   unsigned int alignment_power;
1187
1188   /* If an input section, a pointer to a vector of relocation
1189      records for the data in this section.  */
1190
1191   struct reloc_cache_entry *relocation;
1192
1193   /* If an output section, a pointer to a vector of pointers to
1194      relocation records for the data in this section.  */
1195
1196   struct reloc_cache_entry **orelocation;
1197
1198   /* The number of relocation records in one of the above  */
1199
1200   unsigned reloc_count;
1201
1202   /* Information below is back end specific - and not always used
1203      or updated.  */
1204
1205   /* File position of section data.  */
1206
1207   file_ptr filepos;
1208
1209   /* File position of relocation info.  */
1210
1211   file_ptr rel_filepos;
1212
1213   /* File position of line data.  */
1214
1215   file_ptr line_filepos;
1216
1217   /* Pointer to data for applications.  */
1218
1219   PTR userdata;
1220
1221   /* If the SEC_IN_MEMORY flag is set, this points to the actual
1222      contents.  */
1223   unsigned char *contents;
1224
1225   /* Attached line number information.  */
1226
1227   alent *lineno;
1228
1229   /* Number of line number records.  */
1230
1231   unsigned int lineno_count;
1232
1233   /* Entity size for merging purposes.  */
1234
1235   unsigned int entsize;
1236
1237   /* Optional information about a COMDAT entry; NULL if not COMDAT.  */
1238
1239   struct bfd_comdat_info *comdat;
1240
1241   /* Points to the kept section if this section is a link-once section,
1242      and is discarded.  */
1243   struct sec *kept_section;
1244
1245   /* When a section is being output, this value changes as more
1246      linenumbers are written out.  */
1247
1248   file_ptr moving_line_filepos;
1249
1250   /* What the section number is in the target world.  */
1251
1252   int target_index;
1253
1254   PTR used_by_bfd;
1255
1256   /* If this is a constructor section then here is a list of the
1257      relocations created to relocate items within it.  */
1258
1259   struct relent_chain *constructor_chain;
1260
1261   /* The BFD which owns the section.  */
1262
1263   bfd *owner;
1264
1265   /* A symbol which points at this section only */
1266   struct symbol_cache_entry *symbol;
1267   struct symbol_cache_entry **symbol_ptr_ptr;
1268
1269   struct bfd_link_order *link_order_head;
1270   struct bfd_link_order *link_order_tail;
1271 } asection ;
1272
1273 /* These sections are global, and are managed by BFD.  The application
1274    and target back end are not permitted to change the values in
1275    these sections.  New code should use the section_ptr macros rather
1276    than referring directly to the const sections.  The const sections
1277    may eventually vanish.  */
1278 #define BFD_ABS_SECTION_NAME "*ABS*"
1279 #define BFD_UND_SECTION_NAME "*UND*"
1280 #define BFD_COM_SECTION_NAME "*COM*"
1281 #define BFD_IND_SECTION_NAME "*IND*"
1282
1283 /* the absolute section */
1284 extern const asection bfd_abs_section;
1285 #define bfd_abs_section_ptr ((asection *) &bfd_abs_section)
1286 #define bfd_is_abs_section(sec) ((sec) == bfd_abs_section_ptr)
1287 /* Pointer to the undefined section */
1288 extern const asection bfd_und_section;
1289 #define bfd_und_section_ptr ((asection *) &bfd_und_section)
1290 #define bfd_is_und_section(sec) ((sec) == bfd_und_section_ptr)
1291 /* Pointer to the common section */
1292 extern const asection bfd_com_section;
1293 #define bfd_com_section_ptr ((asection *) &bfd_com_section)
1294 /* Pointer to the indirect section */
1295 extern const asection bfd_ind_section;
1296 #define bfd_ind_section_ptr ((asection *) &bfd_ind_section)
1297 #define bfd_is_ind_section(sec) ((sec) == bfd_ind_section_ptr)
1298
1299 extern const struct symbol_cache_entry * const bfd_abs_symbol;
1300 extern const struct symbol_cache_entry * const bfd_com_symbol;
1301 extern const struct symbol_cache_entry * const bfd_und_symbol;
1302 extern const struct symbol_cache_entry * const bfd_ind_symbol;
1303 #define bfd_get_section_size_before_reloc(section) \
1304      ((section)->reloc_done ? (abort (), (bfd_size_type) 1) \
1305                             : (section)->_raw_size)
1306 #define bfd_get_section_size_after_reloc(section) \
1307      ((section)->reloc_done ? (section)->_cooked_size \
1308                             : (abort (), (bfd_size_type) 1))
1309 asection *
1310 bfd_get_section_by_name PARAMS ((bfd *abfd, const char *name));
1311
1312 char *
1313 bfd_get_unique_section_name PARAMS ((bfd *abfd,
1314     const char *templat,
1315     int *count));
1316
1317 asection *
1318 bfd_make_section_old_way PARAMS ((bfd *abfd, const char *name));
1319
1320 asection *
1321 bfd_make_section_anyway PARAMS ((bfd *abfd, const char *name));
1322
1323 asection *
1324 bfd_make_section PARAMS ((bfd *, const char *name));
1325
1326 boolean
1327 bfd_set_section_flags PARAMS ((bfd *abfd, asection *sec, flagword flags));
1328
1329 void
1330 bfd_map_over_sections PARAMS ((bfd *abfd,
1331     void (*func) (bfd *abfd,
1332     asection *sect,
1333     PTR obj),
1334     PTR obj));
1335
1336 boolean
1337 bfd_set_section_size PARAMS ((bfd *abfd, asection *sec, bfd_size_type val));
1338
1339 boolean
1340 bfd_set_section_contents PARAMS ((bfd *abfd,
1341     asection *section,
1342     PTR data,
1343     file_ptr offset,
1344     bfd_size_type count));
1345
1346 boolean
1347 bfd_get_section_contents PARAMS ((bfd *abfd, asection *section, PTR location,
1348     file_ptr offset, bfd_size_type count));
1349
1350 boolean
1351 bfd_copy_private_section_data PARAMS ((bfd *ibfd, asection *isec, bfd *obfd, asection *osec));
1352
1353 #define bfd_copy_private_section_data(ibfd, isection, obfd, osection) \
1354      BFD_SEND (obfd, _bfd_copy_private_section_data, \
1355                (ibfd, isection, obfd, osection))
1356 void
1357 _bfd_strip_section_from_output PARAMS ((struct bfd_link_info *info, asection *section));
1358
1359 enum bfd_architecture
1360 {
1361   bfd_arch_unknown,   /* File arch not known */
1362   bfd_arch_obscure,   /* Arch known, not one of these */
1363   bfd_arch_m68k,      /* Motorola 68xxx */
1364 #define bfd_mach_m68000 1
1365 #define bfd_mach_m68008 2
1366 #define bfd_mach_m68010 3
1367 #define bfd_mach_m68020 4
1368 #define bfd_mach_m68030 5
1369 #define bfd_mach_m68040 6
1370 #define bfd_mach_m68060 7
1371 #define bfd_mach_cpu32  8
1372 #define bfd_mach_mcf5200  9
1373 #define bfd_mach_mcf5206e 10
1374 #define bfd_mach_mcf5307  11
1375 #define bfd_mach_mcf5407  12
1376   bfd_arch_vax,       /* DEC Vax */
1377   bfd_arch_i960,      /* Intel 960 */
1378     /* The order of the following is important.
1379        lower number indicates a machine type that
1380        only accepts a subset of the instructions
1381        available to machines with higher numbers.
1382        The exception is the "ca", which is
1383        incompatible with all other machines except
1384        "core". */
1385
1386 #define bfd_mach_i960_core      1
1387 #define bfd_mach_i960_ka_sa     2
1388 #define bfd_mach_i960_kb_sb     3
1389 #define bfd_mach_i960_mc        4
1390 #define bfd_mach_i960_xa        5
1391 #define bfd_mach_i960_ca        6
1392 #define bfd_mach_i960_jx        7
1393 #define bfd_mach_i960_hx        8
1394
1395   bfd_arch_a29k,      /* AMD 29000 */
1396   bfd_arch_sparc,     /* SPARC */
1397 #define bfd_mach_sparc                 1
1398 /* The difference between v8plus and v9 is that v9 is a true 64 bit env.  */
1399 #define bfd_mach_sparc_sparclet        2
1400 #define bfd_mach_sparc_sparclite       3
1401 #define bfd_mach_sparc_v8plus          4
1402 #define bfd_mach_sparc_v8plusa         5 /* with ultrasparc add'ns */
1403 #define bfd_mach_sparc_sparclite_le    6
1404 #define bfd_mach_sparc_v9              7
1405 #define bfd_mach_sparc_v9a             8 /* with ultrasparc add'ns */
1406 #define bfd_mach_sparc_v8plusb         9 /* with cheetah add'ns */
1407 #define bfd_mach_sparc_v9b             10 /* with cheetah add'ns */
1408 /* Nonzero if MACH has the v9 instruction set.  */
1409 #define bfd_mach_sparc_v9_p(mach) \
1410   ((mach) >= bfd_mach_sparc_v8plus && (mach) <= bfd_mach_sparc_v9b \
1411    && (mach) != bfd_mach_sparc_sparclite_le)
1412   bfd_arch_mips,      /* MIPS Rxxxx */
1413 #define bfd_mach_mips3000              3000
1414 #define bfd_mach_mips3900              3900
1415 #define bfd_mach_mips4000              4000
1416 #define bfd_mach_mips4010              4010
1417 #define bfd_mach_mips4100              4100
1418 #define bfd_mach_mips4111              4111
1419 #define bfd_mach_mips4300              4300
1420 #define bfd_mach_mips4400              4400
1421 #define bfd_mach_mips4600              4600
1422 #define bfd_mach_mips4650              4650
1423 #define bfd_mach_mips5000              5000
1424 #define bfd_mach_mips6000              6000
1425 #define bfd_mach_mips8000              8000
1426 #define bfd_mach_mips10000             10000
1427 #define bfd_mach_mips12000             12000
1428 #define bfd_mach_mips16                16
1429 #define bfd_mach_mips32                32
1430 #define bfd_mach_mips32_4k             3204113 /* 32, 04, octal 'K' */
1431 #define bfd_mach_mips5                 5
1432 #define bfd_mach_mips64                64
1433 #define bfd_mach_mips_sb1              12310201 /* octal 'SB', 01 */
1434   bfd_arch_i386,      /* Intel 386 */
1435 #define bfd_mach_i386_i386 0
1436 #define bfd_mach_i386_i8086 1
1437 #define bfd_mach_i386_i386_intel_syntax 2
1438 #define bfd_mach_x86_64 3
1439 #define bfd_mach_x86_64_intel_syntax 4
1440   bfd_arch_we32k,     /* AT&T WE32xxx */
1441   bfd_arch_tahoe,     /* CCI/Harris Tahoe */
1442   bfd_arch_i860,      /* Intel 860 */
1443   bfd_arch_i370,      /* IBM 360/370 Mainframes */
1444   bfd_arch_romp,      /* IBM ROMP PC/RT */
1445   bfd_arch_alliant,   /* Alliant */
1446   bfd_arch_convex,    /* Convex */
1447   bfd_arch_m88k,      /* Motorola 88xxx */
1448   bfd_arch_pyramid,   /* Pyramid Technology */
1449   bfd_arch_h8300,     /* Hitachi H8/300 */
1450 #define bfd_mach_h8300   1
1451 #define bfd_mach_h8300h  2
1452 #define bfd_mach_h8300s  3
1453   bfd_arch_pdp11,     /* DEC PDP-11 */
1454   bfd_arch_powerpc,   /* PowerPC */
1455 #define bfd_mach_ppc           0
1456 #define bfd_mach_ppc_403       403
1457 #define bfd_mach_ppc_403gc     4030
1458 #define bfd_mach_ppc_505       505
1459 #define bfd_mach_ppc_601       601
1460 #define bfd_mach_ppc_602       602
1461 #define bfd_mach_ppc_603       603
1462 #define bfd_mach_ppc_ec603e    6031
1463 #define bfd_mach_ppc_604       604
1464 #define bfd_mach_ppc_620       620
1465 #define bfd_mach_ppc_630       630
1466 #define bfd_mach_ppc_750       750
1467 #define bfd_mach_ppc_860       860
1468 #define bfd_mach_ppc_a35       35
1469 #define bfd_mach_ppc_rs64ii    642
1470 #define bfd_mach_ppc_rs64iii   643
1471 #define bfd_mach_ppc_7400      7400
1472   bfd_arch_rs6000,    /* IBM RS/6000 */
1473 #define bfd_mach_rs6k          0
1474 #define bfd_mach_rs6k_rs1      6001
1475 #define bfd_mach_rs6k_rsc      6003
1476 #define bfd_mach_rs6k_rs2      6002
1477   bfd_arch_hppa,      /* HP PA RISC */
1478   bfd_arch_d10v,      /* Mitsubishi D10V */
1479 #define bfd_mach_d10v          0
1480 #define bfd_mach_d10v_ts2      2
1481 #define bfd_mach_d10v_ts3      3
1482   bfd_arch_d30v,      /* Mitsubishi D30V */
1483   bfd_arch_m68hc11,   /* Motorola 68HC11 */
1484   bfd_arch_m68hc12,   /* Motorola 68HC12 */
1485   bfd_arch_z8k,       /* Zilog Z8000 */
1486 #define bfd_mach_z8001         1
1487 #define bfd_mach_z8002         2
1488   bfd_arch_h8500,     /* Hitachi H8/500 */
1489   bfd_arch_sh,        /* Hitachi SH */
1490 #define bfd_mach_sh            0
1491 #define bfd_mach_sh2        0x20
1492 #define bfd_mach_sh_dsp     0x2d
1493 #define bfd_mach_sh3        0x30
1494 #define bfd_mach_sh3_dsp    0x3d
1495 #define bfd_mach_sh3e       0x3e
1496 #define bfd_mach_sh4        0x40
1497   bfd_arch_alpha,     /* Dec Alpha */
1498 #define bfd_mach_alpha_ev4  0x10
1499 #define bfd_mach_alpha_ev5  0x20
1500 #define bfd_mach_alpha_ev6  0x30
1501   bfd_arch_arm,       /* Advanced Risc Machines ARM */
1502 #define bfd_mach_arm_2         1
1503 #define bfd_mach_arm_2a        2
1504 #define bfd_mach_arm_3         3
1505 #define bfd_mach_arm_3M        4
1506 #define bfd_mach_arm_4         5
1507 #define bfd_mach_arm_4T        6
1508 #define bfd_mach_arm_5         7
1509 #define bfd_mach_arm_5T        8
1510 #define bfd_mach_arm_5TE       9
1511 #define bfd_mach_arm_XScale    10
1512   bfd_arch_ns32k,     /* National Semiconductors ns32000 */
1513   bfd_arch_w65,       /* WDC 65816 */
1514   bfd_arch_tic30,     /* Texas Instruments TMS320C30 */
1515   bfd_arch_tic54x,    /* Texas Instruments TMS320C54X */
1516   bfd_arch_tic80,     /* TI TMS320c80 (MVP) */
1517   bfd_arch_v850,      /* NEC V850 */
1518 #define bfd_mach_v850          0
1519 #define bfd_mach_v850e         'E'
1520 #define bfd_mach_v850ea        'A'
1521   bfd_arch_arc,       /* ARC Cores */
1522 #define bfd_mach_arc_5         0
1523 #define bfd_mach_arc_6         1
1524 #define bfd_mach_arc_7         2
1525 #define bfd_mach_arc_8         3
1526   bfd_arch_m32r,      /* Mitsubishi M32R/D */
1527 #define bfd_mach_m32r          0 /* backwards compatibility */
1528 #define bfd_mach_m32rx         'x'
1529   bfd_arch_mn10200,   /* Matsushita MN10200 */
1530   bfd_arch_mn10300,   /* Matsushita MN10300 */
1531 #define bfd_mach_mn10300               300
1532 #define bfd_mach_am33          330
1533   bfd_arch_fr30,
1534 #define bfd_mach_fr30          0x46523330
1535   bfd_arch_mcore,
1536   bfd_arch_ia64,      /* HP/Intel ia64 */
1537 #define bfd_mach_ia64_elf64    0
1538 #define bfd_mach_ia64_elf32    1
1539   bfd_arch_pj,
1540   bfd_arch_avr,       /* Atmel AVR microcontrollers */
1541 #define bfd_mach_avr1          1
1542 #define bfd_mach_avr2          2
1543 #define bfd_mach_avr3          3
1544 #define bfd_mach_avr4          4
1545 #define bfd_mach_avr5          5
1546   bfd_arch_cris,      /* Axis CRIS */
1547   bfd_arch_s390,      /* IBM s390 */
1548 #define bfd_mach_s390_esa      0
1549 #define bfd_mach_s390_esame    1
1550   bfd_arch_openrisc,  /* OpenRISC */
1551   bfd_arch_last
1552   };
1553
1554 typedef struct bfd_arch_info
1555 {
1556   int bits_per_word;
1557   int bits_per_address;
1558   int bits_per_byte;
1559   enum bfd_architecture arch;
1560   unsigned long mach;
1561   const char *arch_name;
1562   const char *printable_name;
1563   unsigned int section_align_power;
1564   /* True if this is the default machine for the architecture.  */
1565   boolean the_default;
1566   const struct bfd_arch_info * (*compatible)
1567        PARAMS ((const struct bfd_arch_info *a,
1568                 const struct bfd_arch_info *b));
1569
1570   boolean (*scan) PARAMS ((const struct bfd_arch_info *, const char *));
1571
1572   const struct bfd_arch_info *next;
1573 } bfd_arch_info_type;
1574 const char *
1575 bfd_printable_name PARAMS ((bfd *abfd));
1576
1577 const bfd_arch_info_type *
1578 bfd_scan_arch PARAMS ((const char *string));
1579
1580 const char **
1581 bfd_arch_list PARAMS ((void));
1582
1583 const bfd_arch_info_type *
1584 bfd_arch_get_compatible PARAMS ((
1585     const bfd *abfd,
1586     const bfd *bbfd));
1587
1588 void
1589 bfd_set_arch_info PARAMS ((bfd *abfd, const bfd_arch_info_type *arg));
1590
1591 enum bfd_architecture
1592 bfd_get_arch PARAMS ((bfd *abfd));
1593
1594 unsigned long
1595 bfd_get_mach PARAMS ((bfd *abfd));
1596
1597 unsigned int
1598 bfd_arch_bits_per_byte PARAMS ((bfd *abfd));
1599
1600 unsigned int
1601 bfd_arch_bits_per_address PARAMS ((bfd *abfd));
1602
1603 const bfd_arch_info_type *
1604 bfd_get_arch_info PARAMS ((bfd *abfd));
1605
1606 const bfd_arch_info_type *
1607 bfd_lookup_arch PARAMS ((enum bfd_architecture
1608     arch,
1609     unsigned long machine));
1610
1611 const char *
1612 bfd_printable_arch_mach PARAMS ((enum bfd_architecture arch, unsigned long machine));
1613
1614 unsigned int
1615 bfd_octets_per_byte PARAMS ((bfd *abfd));
1616
1617 unsigned int
1618 bfd_arch_mach_octets_per_byte PARAMS ((enum bfd_architecture arch,
1619     unsigned long machine));
1620
1621 typedef enum bfd_reloc_status
1622 {
1623        /* No errors detected */
1624   bfd_reloc_ok,
1625
1626        /* The relocation was performed, but there was an overflow. */
1627   bfd_reloc_overflow,
1628
1629        /* The address to relocate was not within the section supplied. */
1630   bfd_reloc_outofrange,
1631
1632        /* Used by special functions */
1633   bfd_reloc_continue,
1634
1635        /* Unsupported relocation size requested. */
1636   bfd_reloc_notsupported,
1637
1638        /* Unused */
1639   bfd_reloc_other,
1640
1641        /* The symbol to relocate against was undefined. */
1642   bfd_reloc_undefined,
1643
1644        /* The relocation was performed, but may not be ok - presently
1645           generated only when linking i960 coff files with i960 b.out
1646           symbols.  If this type is returned, the error_message argument
1647           to bfd_perform_relocation will be set.  */
1648   bfd_reloc_dangerous
1649  }
1650  bfd_reloc_status_type;
1651
1652
1653 typedef struct reloc_cache_entry
1654 {
1655        /* A pointer into the canonical table of pointers  */
1656   struct symbol_cache_entry **sym_ptr_ptr;
1657
1658        /* offset in section */
1659   bfd_size_type address;
1660
1661        /* addend for relocation value */
1662   bfd_vma addend;
1663
1664        /* Pointer to how to perform the required relocation */
1665   reloc_howto_type *howto;
1666
1667 } arelent;
1668 enum complain_overflow
1669 {
1670        /* Do not complain on overflow. */
1671   complain_overflow_dont,
1672
1673        /* Complain if the bitfield overflows, whether it is considered
1674           as signed or unsigned. */
1675   complain_overflow_bitfield,
1676
1677        /* Complain if the value overflows when considered as signed
1678           number. */
1679   complain_overflow_signed,
1680
1681        /* Complain if the value overflows when considered as an
1682           unsigned number. */
1683   complain_overflow_unsigned
1684 };
1685
1686 struct reloc_howto_struct
1687 {
1688        /*  The type field has mainly a documentary use - the back end can
1689            do what it wants with it, though normally the back end's
1690            external idea of what a reloc number is stored
1691            in this field. For example, a PC relative word relocation
1692            in a coff environment has the type 023 - because that's
1693            what the outside world calls a R_PCRWORD reloc. */
1694   unsigned int type;
1695
1696        /*  The value the final relocation is shifted right by. This drops
1697            unwanted data from the relocation.  */
1698   unsigned int rightshift;
1699
1700        /*  The size of the item to be relocated.  This is *not* a
1701            power-of-two measure.  To get the number of bytes operated
1702            on by a type of relocation, use bfd_get_reloc_size.  */
1703   int size;
1704
1705        /*  The number of bits in the item to be relocated.  This is used
1706            when doing overflow checking.  */
1707   unsigned int bitsize;
1708
1709        /*  Notes that the relocation is relative to the location in the
1710            data section of the addend. The relocation function will
1711            subtract from the relocation value the address of the location
1712            being relocated. */
1713   boolean pc_relative;
1714
1715        /*  The bit position of the reloc value in the destination.
1716            The relocated value is left shifted by this amount. */
1717   unsigned int bitpos;
1718
1719        /* What type of overflow error should be checked for when
1720           relocating. */
1721   enum complain_overflow complain_on_overflow;
1722
1723        /* If this field is non null, then the supplied function is
1724           called rather than the normal function. This allows really
1725           strange relocation methods to be accomodated (e.g., i960 callj
1726           instructions). */
1727   bfd_reloc_status_type (*special_function)
1728                                    PARAMS ((bfd *abfd,
1729                                             arelent *reloc_entry,
1730                                             struct symbol_cache_entry *symbol,
1731                                             PTR data,
1732                                             asection *input_section,
1733                                             bfd *output_bfd,
1734                                             char **error_message));
1735
1736        /* The textual name of the relocation type. */
1737   char *name;
1738
1739        /* Some formats record a relocation addend in the section contents
1740           rather than with the relocation.  For ELF formats this is the
1741           distinction between USE_REL and USE_RELA (though the code checks
1742           for USE_REL == 1/0).  The value of this field is TRUE if the
1743           addend is recorded with the section contents; when performing a
1744           partial link (ld -r) the section contents (the data) will be
1745           modified.  The value of this field is FALSE if addends are
1746           recorded with the relocation (in arelent.addend); when performing
1747           a partial link the relocation will be modified.
1748           All relocations for all ELF USE_RELA targets should set this field
1749           to FALSE (values of TRUE should be looked on with suspicion).
1750           However, the converse is not true: not all relocations of all ELF
1751           USE_REL targets set this field to TRUE.  Why this is so is peculiar
1752           to each particular target.  For relocs that aren't used in partial
1753           links (e.g. GOT stuff) it doesn't matter what this is set to.  */
1754   boolean partial_inplace;
1755
1756        /* The src_mask selects which parts of the read in data
1757           are to be used in the relocation sum.  E.g., if this was an 8 bit
1758           byte of data which we read and relocated, this would be
1759           0x000000ff. When we have relocs which have an addend, such as
1760           sun4 extended relocs, the value in the offset part of a
1761           relocating field is garbage so we never use it. In this case
1762           the mask would be 0x00000000. */
1763   bfd_vma src_mask;
1764
1765        /* The dst_mask selects which parts of the instruction are replaced
1766           into the instruction. In most cases src_mask == dst_mask,
1767           except in the above special case, where dst_mask would be
1768           0x000000ff, and src_mask would be 0x00000000.   */
1769   bfd_vma dst_mask;
1770
1771        /* When some formats create PC relative instructions, they leave
1772           the value of the pc of the place being relocated in the offset
1773           slot of the instruction, so that a PC relative relocation can
1774           be made just by adding in an ordinary offset (e.g., sun3 a.out).
1775           Some formats leave the displacement part of an instruction
1776           empty (e.g., m88k bcs); this flag signals the fact.*/
1777   boolean pcrel_offset;
1778
1779 };
1780 #define HOWTO(C, R,S,B, P, BI, O, SF, NAME, INPLACE, MASKSRC, MASKDST, PC) \
1781   {(unsigned)C,R,S,B, P, BI, O,SF,NAME,INPLACE,MASKSRC,MASKDST,PC}
1782 #define NEWHOWTO( FUNCTION, NAME,SIZE,REL,IN) HOWTO(0,0,SIZE,0,REL,0,complain_overflow_dont,FUNCTION, NAME,false,0,0,IN)
1783
1784 #define EMPTY_HOWTO(C) \
1785   HOWTO((C),0,0,0,false,0,complain_overflow_dont,NULL,NULL,false,0,0,false)
1786
1787 #define HOWTO_PREPARE(relocation, symbol)      \
1788   {                                            \
1789   if (symbol != (asymbol *)NULL) {             \
1790     if (bfd_is_com_section (symbol->section)) { \
1791       relocation = 0;                          \
1792     }                                          \
1793     else {                                     \
1794       relocation = symbol->value;              \
1795     }                                          \
1796   }                                            \
1797 }
1798 unsigned int
1799 bfd_get_reloc_size PARAMS ((reloc_howto_type *));
1800
1801 typedef struct relent_chain {
1802   arelent relent;
1803   struct   relent_chain *next;
1804 } arelent_chain;
1805 bfd_reloc_status_type
1806 bfd_check_overflow PARAMS ((enum complain_overflow how,
1807     unsigned int bitsize,
1808     unsigned int rightshift,
1809     unsigned int addrsize,
1810     bfd_vma relocation));
1811
1812 bfd_reloc_status_type
1813 bfd_perform_relocation PARAMS ((bfd *abfd,
1814     arelent *reloc_entry,
1815     PTR data,
1816     asection *input_section,
1817     bfd *output_bfd,
1818     char **error_message));
1819
1820 bfd_reloc_status_type
1821 bfd_install_relocation PARAMS ((bfd *abfd,
1822     arelent *reloc_entry,
1823     PTR data, bfd_vma data_start,
1824     asection *input_section,
1825     char **error_message));
1826
1827 enum bfd_reloc_code_real {
1828   _dummy_first_bfd_reloc_code_real,
1829
1830
1831 /* Basic absolute relocations of N bits. */
1832   BFD_RELOC_64,
1833   BFD_RELOC_32,
1834   BFD_RELOC_26,
1835   BFD_RELOC_24,
1836   BFD_RELOC_16,
1837   BFD_RELOC_14,
1838   BFD_RELOC_8,
1839
1840 /* PC-relative relocations.  Sometimes these are relative to the address
1841 of the relocation itself; sometimes they are relative to the start of
1842 the section containing the relocation.  It depends on the specific target.
1843
1844 The 24-bit relocation is used in some Intel 960 configurations. */
1845   BFD_RELOC_64_PCREL,
1846   BFD_RELOC_32_PCREL,
1847   BFD_RELOC_24_PCREL,
1848   BFD_RELOC_16_PCREL,
1849   BFD_RELOC_12_PCREL,
1850   BFD_RELOC_8_PCREL,
1851
1852 /* For ELF. */
1853   BFD_RELOC_32_GOT_PCREL,
1854   BFD_RELOC_16_GOT_PCREL,
1855   BFD_RELOC_8_GOT_PCREL,
1856   BFD_RELOC_32_GOTOFF,
1857   BFD_RELOC_16_GOTOFF,
1858   BFD_RELOC_LO16_GOTOFF,
1859   BFD_RELOC_HI16_GOTOFF,
1860   BFD_RELOC_HI16_S_GOTOFF,
1861   BFD_RELOC_8_GOTOFF,
1862   BFD_RELOC_32_PLT_PCREL,
1863   BFD_RELOC_24_PLT_PCREL,
1864   BFD_RELOC_16_PLT_PCREL,
1865   BFD_RELOC_8_PLT_PCREL,
1866   BFD_RELOC_32_PLTOFF,
1867   BFD_RELOC_16_PLTOFF,
1868   BFD_RELOC_LO16_PLTOFF,
1869   BFD_RELOC_HI16_PLTOFF,
1870   BFD_RELOC_HI16_S_PLTOFF,
1871   BFD_RELOC_8_PLTOFF,
1872
1873 /* Relocations used by 68K ELF. */
1874   BFD_RELOC_68K_GLOB_DAT,
1875   BFD_RELOC_68K_JMP_SLOT,
1876   BFD_RELOC_68K_RELATIVE,
1877
1878 /* Linkage-table relative. */
1879   BFD_RELOC_32_BASEREL,
1880   BFD_RELOC_16_BASEREL,
1881   BFD_RELOC_LO16_BASEREL,
1882   BFD_RELOC_HI16_BASEREL,
1883   BFD_RELOC_HI16_S_BASEREL,
1884   BFD_RELOC_8_BASEREL,
1885   BFD_RELOC_RVA,
1886
1887 /* Absolute 8-bit relocation, but used to form an address like 0xFFnn. */
1888   BFD_RELOC_8_FFnn,
1889
1890 /* These PC-relative relocations are stored as word displacements --
1891 i.e., byte displacements shifted right two bits.  The 30-bit word
1892 displacement (<<32_PCREL_S2>> -- 32 bits, shifted 2) is used on the
1893 SPARC.  (SPARC tools generally refer to this as <<WDISP30>>.)  The
1894 signed 16-bit displacement is used on the MIPS, and the 23-bit
1895 displacement is used on the Alpha. */
1896   BFD_RELOC_32_PCREL_S2,
1897   BFD_RELOC_16_PCREL_S2,
1898   BFD_RELOC_23_PCREL_S2,
1899
1900 /* High 22 bits and low 10 bits of 32-bit value, placed into lower bits of
1901 the target word.  These are used on the SPARC. */
1902   BFD_RELOC_HI22,
1903   BFD_RELOC_LO10,
1904
1905 /* For systems that allocate a Global Pointer register, these are
1906 displacements off that register.  These relocation types are
1907 handled specially, because the value the register will have is
1908 decided relatively late. */
1909   BFD_RELOC_GPREL16,
1910   BFD_RELOC_GPREL32,
1911
1912 /* Reloc types used for i960/b.out. */
1913   BFD_RELOC_I960_CALLJ,
1914
1915 /* SPARC ELF relocations.  There is probably some overlap with other
1916 relocation types already defined. */
1917   BFD_RELOC_NONE,
1918   BFD_RELOC_SPARC_WDISP22,
1919   BFD_RELOC_SPARC22,
1920   BFD_RELOC_SPARC13,
1921   BFD_RELOC_SPARC_GOT10,
1922   BFD_RELOC_SPARC_GOT13,
1923   BFD_RELOC_SPARC_GOT22,
1924   BFD_RELOC_SPARC_PC10,
1925   BFD_RELOC_SPARC_PC22,
1926   BFD_RELOC_SPARC_WPLT30,
1927   BFD_RELOC_SPARC_COPY,
1928   BFD_RELOC_SPARC_GLOB_DAT,
1929   BFD_RELOC_SPARC_JMP_SLOT,
1930   BFD_RELOC_SPARC_RELATIVE,
1931   BFD_RELOC_SPARC_UA16,
1932   BFD_RELOC_SPARC_UA32,
1933   BFD_RELOC_SPARC_UA64,
1934
1935 /* I think these are specific to SPARC a.out (e.g., Sun 4). */
1936   BFD_RELOC_SPARC_BASE13,
1937   BFD_RELOC_SPARC_BASE22,
1938
1939 /* SPARC64 relocations */
1940 #define BFD_RELOC_SPARC_64 BFD_RELOC_64
1941   BFD_RELOC_SPARC_10,
1942   BFD_RELOC_SPARC_11,
1943   BFD_RELOC_SPARC_OLO10,
1944   BFD_RELOC_SPARC_HH22,
1945   BFD_RELOC_SPARC_HM10,
1946   BFD_RELOC_SPARC_LM22,
1947   BFD_RELOC_SPARC_PC_HH22,
1948   BFD_RELOC_SPARC_PC_HM10,
1949   BFD_RELOC_SPARC_PC_LM22,
1950   BFD_RELOC_SPARC_WDISP16,
1951   BFD_RELOC_SPARC_WDISP19,
1952   BFD_RELOC_SPARC_7,
1953   BFD_RELOC_SPARC_6,
1954   BFD_RELOC_SPARC_5,
1955 #define BFD_RELOC_SPARC_DISP64 BFD_RELOC_64_PCREL
1956   BFD_RELOC_SPARC_PLT64,
1957   BFD_RELOC_SPARC_HIX22,
1958   BFD_RELOC_SPARC_LOX10,
1959   BFD_RELOC_SPARC_H44,
1960   BFD_RELOC_SPARC_M44,
1961   BFD_RELOC_SPARC_L44,
1962   BFD_RELOC_SPARC_REGISTER,
1963
1964 /* SPARC little endian relocation */
1965   BFD_RELOC_SPARC_REV32,
1966
1967 /* Alpha ECOFF and ELF relocations.  Some of these treat the symbol or
1968 "addend" in some special way.
1969 For GPDISP_HI16 ("gpdisp") relocations, the symbol is ignored when
1970 writing; when reading, it will be the absolute section symbol.  The
1971 addend is the displacement in bytes of the "lda" instruction from
1972 the "ldah" instruction (which is at the address of this reloc). */
1973   BFD_RELOC_ALPHA_GPDISP_HI16,
1974
1975 /* For GPDISP_LO16 ("ignore") relocations, the symbol is handled as
1976 with GPDISP_HI16 relocs.  The addend is ignored when writing the
1977 relocations out, and is filled in with the file's GP value on
1978 reading, for convenience. */
1979   BFD_RELOC_ALPHA_GPDISP_LO16,
1980
1981 /* The ELF GPDISP relocation is exactly the same as the GPDISP_HI16
1982 relocation except that there is no accompanying GPDISP_LO16
1983 relocation. */
1984   BFD_RELOC_ALPHA_GPDISP,
1985
1986 /* The Alpha LITERAL/LITUSE relocs are produced by a symbol reference;
1987 the assembler turns it into a LDQ instruction to load the address of
1988 the symbol, and then fills in a register in the real instruction.
1989
1990 The LITERAL reloc, at the LDQ instruction, refers to the .lita
1991 section symbol.  The addend is ignored when writing, but is filled
1992 in with the file's GP value on reading, for convenience, as with the
1993 GPDISP_LO16 reloc.
1994
1995 The ELF_LITERAL reloc is somewhere between 16_GOTOFF and GPDISP_LO16.
1996 It should refer to the symbol to be referenced, as with 16_GOTOFF,
1997 but it generates output not based on the position within the .got
1998 section, but relative to the GP value chosen for the file during the
1999 final link stage.
2000
2001 The LITUSE reloc, on the instruction using the loaded address, gives
2002 information to the linker that it might be able to use to optimize
2003 away some literal section references.  The symbol is ignored (read
2004 as the absolute section symbol), and the "addend" indicates the type
2005 of instruction using the register:
2006 1 - "memory" fmt insn
2007 2 - byte-manipulation (byte offset reg)
2008 3 - jsr (target of branch)
2009
2010 The GNU linker currently doesn't do any of this optimizing. */
2011   BFD_RELOC_ALPHA_LITERAL,
2012   BFD_RELOC_ALPHA_ELF_LITERAL,
2013   BFD_RELOC_ALPHA_LITUSE,
2014
2015 /* The BFD_RELOC_ALPHA_USER_* relocations are used by the assembler to
2016 process the explicit !<reloc>!sequence relocations, and are mapped
2017 into the normal relocations at the end of processing. */
2018   BFD_RELOC_ALPHA_USER_LITERAL,
2019   BFD_RELOC_ALPHA_USER_LITUSE_BASE,
2020   BFD_RELOC_ALPHA_USER_LITUSE_BYTOFF,
2021   BFD_RELOC_ALPHA_USER_LITUSE_JSR,
2022   BFD_RELOC_ALPHA_USER_GPDISP,
2023   BFD_RELOC_ALPHA_USER_GPRELHIGH,
2024   BFD_RELOC_ALPHA_USER_GPRELLOW,
2025
2026 /* The HINT relocation indicates a value that should be filled into the
2027 "hint" field of a jmp/jsr/ret instruction, for possible branch-
2028 prediction logic which may be provided on some processors. */
2029   BFD_RELOC_ALPHA_HINT,
2030
2031 /* The LINKAGE relocation outputs a linkage pair in the object file,
2032 which is filled by the linker. */
2033   BFD_RELOC_ALPHA_LINKAGE,
2034
2035 /* The CODEADDR relocation outputs a STO_CA in the object file,
2036 which is filled by the linker. */
2037   BFD_RELOC_ALPHA_CODEADDR,
2038
2039 /* Bits 27..2 of the relocation address shifted right 2 bits;
2040 simple reloc otherwise. */
2041   BFD_RELOC_MIPS_JMP,
2042
2043 /* The MIPS16 jump instruction. */
2044   BFD_RELOC_MIPS16_JMP,
2045
2046 /* MIPS16 GP relative reloc. */
2047   BFD_RELOC_MIPS16_GPREL,
2048
2049 /* High 16 bits of 32-bit value; simple reloc. */
2050   BFD_RELOC_HI16,
2051
2052 /* High 16 bits of 32-bit value but the low 16 bits will be sign
2053 extended and added to form the final result.  If the low 16
2054 bits form a negative number, we need to add one to the high value
2055 to compensate for the borrow when the low bits are added. */
2056   BFD_RELOC_HI16_S,
2057
2058 /* Low 16 bits. */
2059   BFD_RELOC_LO16,
2060
2061 /* Like BFD_RELOC_HI16_S, but PC relative. */
2062   BFD_RELOC_PCREL_HI16_S,
2063
2064 /* Like BFD_RELOC_LO16, but PC relative. */
2065   BFD_RELOC_PCREL_LO16,
2066
2067 /* Relocation relative to the global pointer. */
2068 #define BFD_RELOC_MIPS_GPREL BFD_RELOC_GPREL16
2069
2070 /* Relocation against a MIPS literal section. */
2071   BFD_RELOC_MIPS_LITERAL,
2072
2073 /* MIPS ELF relocations. */
2074   BFD_RELOC_MIPS_GOT16,
2075   BFD_RELOC_MIPS_CALL16,
2076 #define BFD_RELOC_MIPS_GPREL32 BFD_RELOC_GPREL32
2077   BFD_RELOC_MIPS_GOT_HI16,
2078   BFD_RELOC_MIPS_GOT_LO16,
2079   BFD_RELOC_MIPS_CALL_HI16,
2080   BFD_RELOC_MIPS_CALL_LO16,
2081   BFD_RELOC_MIPS_SUB,
2082   BFD_RELOC_MIPS_GOT_PAGE,
2083   BFD_RELOC_MIPS_GOT_OFST,
2084   BFD_RELOC_MIPS_GOT_DISP,
2085   BFD_RELOC_MIPS_SHIFT5,
2086   BFD_RELOC_MIPS_SHIFT6,
2087   BFD_RELOC_MIPS_INSERT_A,
2088   BFD_RELOC_MIPS_INSERT_B,
2089   BFD_RELOC_MIPS_DELETE,
2090   BFD_RELOC_MIPS_HIGHEST,
2091   BFD_RELOC_MIPS_HIGHER,
2092   BFD_RELOC_MIPS_SCN_DISP,
2093   BFD_RELOC_MIPS_REL16,
2094   BFD_RELOC_MIPS_RELGOT,
2095   BFD_RELOC_MIPS_JALR,
2096
2097
2098 /* i386/elf relocations */
2099   BFD_RELOC_386_GOT32,
2100   BFD_RELOC_386_PLT32,
2101   BFD_RELOC_386_COPY,
2102   BFD_RELOC_386_GLOB_DAT,
2103   BFD_RELOC_386_JUMP_SLOT,
2104   BFD_RELOC_386_RELATIVE,
2105   BFD_RELOC_386_GOTOFF,
2106   BFD_RELOC_386_GOTPC,
2107
2108 /* x86-64/elf relocations */
2109   BFD_RELOC_X86_64_GOT32,
2110   BFD_RELOC_X86_64_PLT32,
2111   BFD_RELOC_X86_64_COPY,
2112   BFD_RELOC_X86_64_GLOB_DAT,
2113   BFD_RELOC_X86_64_JUMP_SLOT,
2114   BFD_RELOC_X86_64_RELATIVE,
2115   BFD_RELOC_X86_64_GOTPCREL,
2116   BFD_RELOC_X86_64_32S,
2117
2118 /* ns32k relocations */
2119   BFD_RELOC_NS32K_IMM_8,
2120   BFD_RELOC_NS32K_IMM_16,
2121   BFD_RELOC_NS32K_IMM_32,
2122   BFD_RELOC_NS32K_IMM_8_PCREL,
2123   BFD_RELOC_NS32K_IMM_16_PCREL,
2124   BFD_RELOC_NS32K_IMM_32_PCREL,
2125   BFD_RELOC_NS32K_DISP_8,
2126   BFD_RELOC_NS32K_DISP_16,
2127   BFD_RELOC_NS32K_DISP_32,
2128   BFD_RELOC_NS32K_DISP_8_PCREL,
2129   BFD_RELOC_NS32K_DISP_16_PCREL,
2130   BFD_RELOC_NS32K_DISP_32_PCREL,
2131
2132 /* PDP11 relocations */
2133   BFD_RELOC_PDP11_DISP_8_PCREL,
2134   BFD_RELOC_PDP11_DISP_6_PCREL,
2135
2136 /* Picojava relocs.  Not all of these appear in object files. */
2137   BFD_RELOC_PJ_CODE_HI16,
2138   BFD_RELOC_PJ_CODE_LO16,
2139   BFD_RELOC_PJ_CODE_DIR16,
2140   BFD_RELOC_PJ_CODE_DIR32,
2141   BFD_RELOC_PJ_CODE_REL16,
2142   BFD_RELOC_PJ_CODE_REL32,
2143
2144 /* Power(rs6000) and PowerPC relocations. */
2145   BFD_RELOC_PPC_B26,
2146   BFD_RELOC_PPC_BA26,
2147   BFD_RELOC_PPC_TOC16,
2148   BFD_RELOC_PPC_B16,
2149   BFD_RELOC_PPC_B16_BRTAKEN,
2150   BFD_RELOC_PPC_B16_BRNTAKEN,
2151   BFD_RELOC_PPC_BA16,
2152   BFD_RELOC_PPC_BA16_BRTAKEN,
2153   BFD_RELOC_PPC_BA16_BRNTAKEN,
2154   BFD_RELOC_PPC_COPY,
2155   BFD_RELOC_PPC_GLOB_DAT,
2156   BFD_RELOC_PPC_JMP_SLOT,
2157   BFD_RELOC_PPC_RELATIVE,
2158   BFD_RELOC_PPC_LOCAL24PC,
2159   BFD_RELOC_PPC_EMB_NADDR32,
2160   BFD_RELOC_PPC_EMB_NADDR16,
2161   BFD_RELOC_PPC_EMB_NADDR16_LO,
2162   BFD_RELOC_PPC_EMB_NADDR16_HI,
2163   BFD_RELOC_PPC_EMB_NADDR16_HA,
2164   BFD_RELOC_PPC_EMB_SDAI16,
2165   BFD_RELOC_PPC_EMB_SDA2I16,
2166   BFD_RELOC_PPC_EMB_SDA2REL,
2167   BFD_RELOC_PPC_EMB_SDA21,
2168   BFD_RELOC_PPC_EMB_MRKREF,
2169   BFD_RELOC_PPC_EMB_RELSEC16,
2170   BFD_RELOC_PPC_EMB_RELST_LO,
2171   BFD_RELOC_PPC_EMB_RELST_HI,
2172   BFD_RELOC_PPC_EMB_RELST_HA,
2173   BFD_RELOC_PPC_EMB_BIT_FLD,
2174   BFD_RELOC_PPC_EMB_RELSDA,
2175
2176 /* IBM 370/390 relocations */
2177   BFD_RELOC_I370_D12,
2178
2179 /* The type of reloc used to build a contructor table - at the moment
2180 probably a 32 bit wide absolute relocation, but the target can choose.
2181 It generally does map to one of the other relocation types. */
2182   BFD_RELOC_CTOR,
2183
2184 /* ARM 26 bit pc-relative branch.  The lowest two bits must be zero and are
2185 not stored in the instruction. */
2186   BFD_RELOC_ARM_PCREL_BRANCH,
2187
2188 /* ARM 26 bit pc-relative branch.  The lowest bit must be zero and is
2189 not stored in the instruction.  The 2nd lowest bit comes from a 1 bit
2190 field in the instruction. */
2191   BFD_RELOC_ARM_PCREL_BLX,
2192
2193 /* Thumb 22 bit pc-relative branch.  The lowest bit must be zero and is
2194 not stored in the instruction.  The 2nd lowest bit comes from a 1 bit
2195 field in the instruction. */
2196   BFD_RELOC_THUMB_PCREL_BLX,
2197
2198 /* These relocs are only used within the ARM assembler.  They are not
2199 (at present) written to any object files. */
2200   BFD_RELOC_ARM_IMMEDIATE,
2201   BFD_RELOC_ARM_ADRL_IMMEDIATE,
2202   BFD_RELOC_ARM_OFFSET_IMM,
2203   BFD_RELOC_ARM_SHIFT_IMM,
2204   BFD_RELOC_ARM_SWI,
2205   BFD_RELOC_ARM_MULTI,
2206   BFD_RELOC_ARM_CP_OFF_IMM,
2207   BFD_RELOC_ARM_ADR_IMM,
2208   BFD_RELOC_ARM_LDR_IMM,
2209   BFD_RELOC_ARM_LITERAL,
2210   BFD_RELOC_ARM_IN_POOL,
2211   BFD_RELOC_ARM_OFFSET_IMM8,
2212   BFD_RELOC_ARM_HWLITERAL,
2213   BFD_RELOC_ARM_THUMB_ADD,
2214   BFD_RELOC_ARM_THUMB_IMM,
2215   BFD_RELOC_ARM_THUMB_SHIFT,
2216   BFD_RELOC_ARM_THUMB_OFFSET,
2217   BFD_RELOC_ARM_GOT12,
2218   BFD_RELOC_ARM_GOT32,
2219   BFD_RELOC_ARM_JUMP_SLOT,
2220   BFD_RELOC_ARM_COPY,
2221   BFD_RELOC_ARM_GLOB_DAT,
2222   BFD_RELOC_ARM_PLT32,
2223   BFD_RELOC_ARM_RELATIVE,
2224   BFD_RELOC_ARM_GOTOFF,
2225   BFD_RELOC_ARM_GOTPC,
2226
2227 /* Hitachi SH relocs.  Not all of these appear in object files. */
2228   BFD_RELOC_SH_PCDISP8BY2,
2229   BFD_RELOC_SH_PCDISP12BY2,
2230   BFD_RELOC_SH_IMM4,
2231   BFD_RELOC_SH_IMM4BY2,
2232   BFD_RELOC_SH_IMM4BY4,
2233   BFD_RELOC_SH_IMM8,
2234   BFD_RELOC_SH_IMM8BY2,
2235   BFD_RELOC_SH_IMM8BY4,
2236   BFD_RELOC_SH_PCRELIMM8BY2,
2237   BFD_RELOC_SH_PCRELIMM8BY4,
2238   BFD_RELOC_SH_SWITCH16,
2239   BFD_RELOC_SH_SWITCH32,
2240   BFD_RELOC_SH_USES,
2241   BFD_RELOC_SH_COUNT,
2242   BFD_RELOC_SH_ALIGN,
2243   BFD_RELOC_SH_CODE,
2244   BFD_RELOC_SH_DATA,
2245   BFD_RELOC_SH_LABEL,
2246   BFD_RELOC_SH_LOOP_START,
2247   BFD_RELOC_SH_LOOP_END,
2248   BFD_RELOC_SH_COPY,
2249   BFD_RELOC_SH_GLOB_DAT,
2250   BFD_RELOC_SH_JMP_SLOT,
2251   BFD_RELOC_SH_RELATIVE,
2252   BFD_RELOC_SH_GOTPC,
2253
2254 /* Thumb 23-, 12- and 9-bit pc-relative branches.  The lowest bit must
2255 be zero and is not stored in the instruction. */
2256   BFD_RELOC_THUMB_PCREL_BRANCH9,
2257   BFD_RELOC_THUMB_PCREL_BRANCH12,
2258   BFD_RELOC_THUMB_PCREL_BRANCH23,
2259
2260 /* ARC Cores relocs.
2261 ARC 22 bit pc-relative branch.  The lowest two bits must be zero and are
2262 not stored in the instruction.  The high 20 bits are installed in bits 26
2263 through 7 of the instruction. */
2264   BFD_RELOC_ARC_B22_PCREL,
2265
2266 /* ARC 26 bit absolute branch.  The lowest two bits must be zero and are not
2267 stored in the instruction.  The high 24 bits are installed in bits 23
2268 through 0. */
2269   BFD_RELOC_ARC_B26,
2270
2271 /* Mitsubishi D10V relocs.
2272 This is a 10-bit reloc with the right 2 bits
2273 assumed to be 0. */
2274   BFD_RELOC_D10V_10_PCREL_R,
2275
2276 /* Mitsubishi D10V relocs.
2277 This is a 10-bit reloc with the right 2 bits
2278 assumed to be 0.  This is the same as the previous reloc
2279 except it is in the left container, i.e.,
2280 shifted left 15 bits. */
2281   BFD_RELOC_D10V_10_PCREL_L,
2282
2283 /* This is an 18-bit reloc with the right 2 bits
2284 assumed to be 0. */
2285   BFD_RELOC_D10V_18,
2286
2287 /* This is an 18-bit reloc with the right 2 bits
2288 assumed to be 0. */
2289   BFD_RELOC_D10V_18_PCREL,
2290
2291 /* Mitsubishi D30V relocs.
2292 This is a 6-bit absolute reloc. */
2293   BFD_RELOC_D30V_6,
2294
2295 /* This is a 6-bit pc-relative reloc with
2296 the right 3 bits assumed to be 0. */
2297   BFD_RELOC_D30V_9_PCREL,
2298
2299 /* This is a 6-bit pc-relative reloc with
2300 the right 3 bits assumed to be 0. Same
2301 as the previous reloc but on the right side
2302 of the container. */
2303   BFD_RELOC_D30V_9_PCREL_R,
2304
2305 /* This is a 12-bit absolute reloc with the
2306 right 3 bitsassumed to be 0. */
2307   BFD_RELOC_D30V_15,
2308
2309 /* This is a 12-bit pc-relative reloc with
2310 the right 3 bits assumed to be 0. */
2311   BFD_RELOC_D30V_15_PCREL,
2312
2313 /* This is a 12-bit pc-relative reloc with
2314 the right 3 bits assumed to be 0. Same
2315 as the previous reloc but on the right side
2316 of the container. */
2317   BFD_RELOC_D30V_15_PCREL_R,
2318
2319 /* This is an 18-bit absolute reloc with
2320 the right 3 bits assumed to be 0. */
2321   BFD_RELOC_D30V_21,
2322
2323 /* This is an 18-bit pc-relative reloc with
2324 the right 3 bits assumed to be 0. */
2325   BFD_RELOC_D30V_21_PCREL,
2326
2327 /* This is an 18-bit pc-relative reloc with
2328 the right 3 bits assumed to be 0. Same
2329 as the previous reloc but on the right side
2330 of the container. */
2331   BFD_RELOC_D30V_21_PCREL_R,
2332
2333 /* This is a 32-bit absolute reloc. */
2334   BFD_RELOC_D30V_32,
2335
2336 /* This is a 32-bit pc-relative reloc. */
2337   BFD_RELOC_D30V_32_PCREL,
2338
2339 /* Mitsubishi M32R relocs.
2340 This is a 24 bit absolute address. */
2341   BFD_RELOC_M32R_24,
2342
2343 /* This is a 10-bit pc-relative reloc with the right 2 bits assumed to be 0. */
2344   BFD_RELOC_M32R_10_PCREL,
2345
2346 /* This is an 18-bit reloc with the right 2 bits assumed to be 0. */
2347   BFD_RELOC_M32R_18_PCREL,
2348
2349 /* This is a 26-bit reloc with the right 2 bits assumed to be 0. */
2350   BFD_RELOC_M32R_26_PCREL,
2351
2352 /* This is a 16-bit reloc containing the high 16 bits of an address
2353 used when the lower 16 bits are treated as unsigned. */
2354   BFD_RELOC_M32R_HI16_ULO,
2355
2356 /* This is a 16-bit reloc containing the high 16 bits of an address
2357 used when the lower 16 bits are treated as signed. */
2358   BFD_RELOC_M32R_HI16_SLO,
2359
2360 /* This is a 16-bit reloc containing the lower 16 bits of an address. */
2361   BFD_RELOC_M32R_LO16,
2362
2363 /* This is a 16-bit reloc containing the small data area offset for use in
2364 add3, load, and store instructions. */
2365   BFD_RELOC_M32R_SDA16,
2366
2367 /* This is a 9-bit reloc */
2368   BFD_RELOC_V850_9_PCREL,
2369
2370 /* This is a 22-bit reloc */
2371   BFD_RELOC_V850_22_PCREL,
2372
2373 /* This is a 16 bit offset from the short data area pointer. */
2374   BFD_RELOC_V850_SDA_16_16_OFFSET,
2375
2376 /* This is a 16 bit offset (of which only 15 bits are used) from the
2377 short data area pointer. */
2378   BFD_RELOC_V850_SDA_15_16_OFFSET,
2379
2380 /* This is a 16 bit offset from the zero data area pointer. */
2381   BFD_RELOC_V850_ZDA_16_16_OFFSET,
2382
2383 /* This is a 16 bit offset (of which only 15 bits are used) from the
2384 zero data area pointer. */
2385   BFD_RELOC_V850_ZDA_15_16_OFFSET,
2386
2387 /* This is an 8 bit offset (of which only 6 bits are used) from the
2388 tiny data area pointer. */
2389   BFD_RELOC_V850_TDA_6_8_OFFSET,
2390
2391 /* This is an 8bit offset (of which only 7 bits are used) from the tiny
2392 data area pointer. */
2393   BFD_RELOC_V850_TDA_7_8_OFFSET,
2394
2395 /* This is a 7 bit offset from the tiny data area pointer. */
2396   BFD_RELOC_V850_TDA_7_7_OFFSET,
2397
2398 /* This is a 16 bit offset from the tiny data area pointer. */
2399   BFD_RELOC_V850_TDA_16_16_OFFSET,
2400
2401 /* This is a 5 bit offset (of which only 4 bits are used) from the tiny
2402 data area pointer. */
2403   BFD_RELOC_V850_TDA_4_5_OFFSET,
2404
2405 /* This is a 4 bit offset from the tiny data area pointer. */
2406   BFD_RELOC_V850_TDA_4_4_OFFSET,
2407
2408 /* This is a 16 bit offset from the short data area pointer, with the
2409 bits placed non-contigously in the instruction. */
2410   BFD_RELOC_V850_SDA_16_16_SPLIT_OFFSET,
2411
2412 /* This is a 16 bit offset from the zero data area pointer, with the
2413 bits placed non-contigously in the instruction. */
2414   BFD_RELOC_V850_ZDA_16_16_SPLIT_OFFSET,
2415
2416 /* This is a 6 bit offset from the call table base pointer. */
2417   BFD_RELOC_V850_CALLT_6_7_OFFSET,
2418
2419 /* This is a 16 bit offset from the call table base pointer. */
2420   BFD_RELOC_V850_CALLT_16_16_OFFSET,
2421
2422
2423 /* This is a 32bit pcrel reloc for the mn10300, offset by two bytes in the
2424 instruction. */
2425   BFD_RELOC_MN10300_32_PCREL,
2426
2427 /* This is a 16bit pcrel reloc for the mn10300, offset by two bytes in the
2428 instruction. */
2429   BFD_RELOC_MN10300_16_PCREL,
2430
2431 /* This is a 8bit DP reloc for the tms320c30, where the most
2432 significant 8 bits of a 24 bit word are placed into the least
2433 significant 8 bits of the opcode. */
2434   BFD_RELOC_TIC30_LDP,
2435
2436 /* This is a 7bit reloc for the tms320c54x, where the least
2437 significant 7 bits of a 16 bit word are placed into the least
2438 significant 7 bits of the opcode. */
2439   BFD_RELOC_TIC54X_PARTLS7,
2440
2441 /* This is a 9bit DP reloc for the tms320c54x, where the most
2442 significant 9 bits of a 16 bit word are placed into the least
2443 significant 9 bits of the opcode. */
2444   BFD_RELOC_TIC54X_PARTMS9,
2445
2446 /* This is an extended address 23-bit reloc for the tms320c54x. */
2447   BFD_RELOC_TIC54X_23,
2448
2449 /* This is a 16-bit reloc for the tms320c54x, where the least
2450 significant 16 bits of a 23-bit extended address are placed into
2451 the opcode. */
2452   BFD_RELOC_TIC54X_16_OF_23,
2453
2454 /* This is a reloc for the tms320c54x, where the most
2455 significant 7 bits of a 23-bit extended address are placed into
2456 the opcode. */
2457   BFD_RELOC_TIC54X_MS7_OF_23,
2458
2459 /* This is a 48 bit reloc for the FR30 that stores 32 bits. */
2460   BFD_RELOC_FR30_48,
2461
2462 /* This is a 32 bit reloc for the FR30 that stores 20 bits split up into
2463 two sections. */
2464   BFD_RELOC_FR30_20,
2465
2466 /* This is a 16 bit reloc for the FR30 that stores a 6 bit word offset in
2467 4 bits. */
2468   BFD_RELOC_FR30_6_IN_4,
2469
2470 /* This is a 16 bit reloc for the FR30 that stores an 8 bit byte offset
2471 into 8 bits. */
2472   BFD_RELOC_FR30_8_IN_8,
2473
2474 /* This is a 16 bit reloc for the FR30 that stores a 9 bit short offset
2475 into 8 bits. */
2476   BFD_RELOC_FR30_9_IN_8,
2477
2478 /* This is a 16 bit reloc for the FR30 that stores a 10 bit word offset
2479 into 8 bits. */
2480   BFD_RELOC_FR30_10_IN_8,
2481
2482 /* This is a 16 bit reloc for the FR30 that stores a 9 bit pc relative
2483 short offset into 8 bits. */
2484   BFD_RELOC_FR30_9_PCREL,
2485
2486 /* This is a 16 bit reloc for the FR30 that stores a 12 bit pc relative
2487 short offset into 11 bits. */
2488   BFD_RELOC_FR30_12_PCREL,
2489
2490 /* Motorola Mcore relocations. */
2491   BFD_RELOC_MCORE_PCREL_IMM8BY4,
2492   BFD_RELOC_MCORE_PCREL_IMM11BY2,
2493   BFD_RELOC_MCORE_PCREL_IMM4BY2,
2494   BFD_RELOC_MCORE_PCREL_32,
2495   BFD_RELOC_MCORE_PCREL_JSR_IMM11BY2,
2496   BFD_RELOC_MCORE_RVA,
2497
2498 /* This is a 16 bit reloc for the AVR that stores 8 bit pc relative
2499 short offset into 7 bits. */
2500   BFD_RELOC_AVR_7_PCREL,
2501
2502 /* This is a 16 bit reloc for the AVR that stores 13 bit pc relative
2503 short offset into 12 bits. */
2504   BFD_RELOC_AVR_13_PCREL,
2505
2506 /* This is a 16 bit reloc for the AVR that stores 17 bit value (usually
2507 program memory address) into 16 bits. */
2508   BFD_RELOC_AVR_16_PM,
2509
2510 /* This is a 16 bit reloc for the AVR that stores 8 bit value (usually
2511 data memory address) into 8 bit immediate value of LDI insn. */
2512   BFD_RELOC_AVR_LO8_LDI,
2513
2514 /* This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit
2515 of data memory address) into 8 bit immediate value of LDI insn. */
2516   BFD_RELOC_AVR_HI8_LDI,
2517
2518 /* This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit
2519 of program memory address) into 8 bit immediate value of LDI insn. */
2520   BFD_RELOC_AVR_HH8_LDI,
2521
2522 /* This is a 16 bit reloc for the AVR that stores negated 8 bit value
2523 (usually data memory address) into 8 bit immediate value of SUBI insn. */
2524   BFD_RELOC_AVR_LO8_LDI_NEG,
2525
2526 /* This is a 16 bit reloc for the AVR that stores negated 8 bit value
2527 (high 8 bit of data memory address) into 8 bit immediate value of
2528 SUBI insn. */
2529   BFD_RELOC_AVR_HI8_LDI_NEG,
2530
2531 /* This is a 16 bit reloc for the AVR that stores negated 8 bit value
2532 (most high 8 bit of program memory address) into 8 bit immediate value
2533 of LDI or SUBI insn. */
2534   BFD_RELOC_AVR_HH8_LDI_NEG,
2535
2536 /* This is a 16 bit reloc for the AVR that stores 8 bit value (usually
2537 command address) into 8 bit immediate value of LDI insn. */
2538   BFD_RELOC_AVR_LO8_LDI_PM,
2539
2540 /* This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit
2541 of command address) into 8 bit immediate value of LDI insn. */
2542   BFD_RELOC_AVR_HI8_LDI_PM,
2543
2544 /* This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit
2545 of command address) into 8 bit immediate value of LDI insn. */
2546   BFD_RELOC_AVR_HH8_LDI_PM,
2547
2548 /* This is a 16 bit reloc for the AVR that stores negated 8 bit value
2549 (usually command address) into 8 bit immediate value of SUBI insn. */
2550   BFD_RELOC_AVR_LO8_LDI_PM_NEG,
2551
2552 /* This is a 16 bit reloc for the AVR that stores negated 8 bit value
2553 (high 8 bit of 16 bit command address) into 8 bit immediate value
2554 of SUBI insn. */
2555   BFD_RELOC_AVR_HI8_LDI_PM_NEG,
2556
2557 /* This is a 16 bit reloc for the AVR that stores negated 8 bit value
2558 (high 6 bit of 22 bit command address) into 8 bit immediate
2559 value of SUBI insn. */
2560   BFD_RELOC_AVR_HH8_LDI_PM_NEG,
2561
2562 /* This is a 32 bit reloc for the AVR that stores 23 bit value
2563 into 22 bits. */
2564   BFD_RELOC_AVR_CALL,
2565
2566 /* Direct 12 bit. */
2567   BFD_RELOC_390_12,
2568
2569 /* 12 bit GOT offset. */
2570   BFD_RELOC_390_GOT12,
2571
2572 /* 32 bit PC relative PLT address. */
2573   BFD_RELOC_390_PLT32,
2574
2575 /* Copy symbol at runtime. */
2576   BFD_RELOC_390_COPY,
2577
2578 /* Create GOT entry. */
2579   BFD_RELOC_390_GLOB_DAT,
2580
2581 /* Create PLT entry. */
2582   BFD_RELOC_390_JMP_SLOT,
2583
2584 /* Adjust by program base. */
2585   BFD_RELOC_390_RELATIVE,
2586
2587 /* 32 bit PC relative offset to GOT. */
2588   BFD_RELOC_390_GOTPC,
2589
2590 /* 16 bit GOT offset. */
2591   BFD_RELOC_390_GOT16,
2592
2593 /* PC relative 16 bit shifted by 1. */
2594   BFD_RELOC_390_PC16DBL,
2595
2596 /* 16 bit PC rel. PLT shifted by 1. */
2597   BFD_RELOC_390_PLT16DBL,
2598
2599 /* PC relative 32 bit shifted by 1. */
2600   BFD_RELOC_390_PC32DBL,
2601
2602 /* 32 bit PC rel. PLT shifted by 1. */
2603   BFD_RELOC_390_PLT32DBL,
2604
2605 /* 32 bit PC rel. GOT shifted by 1. */
2606   BFD_RELOC_390_GOTPCDBL,
2607
2608 /* 64 bit GOT offset. */
2609   BFD_RELOC_390_GOT64,
2610
2611 /* 64 bit PC relative PLT address. */
2612   BFD_RELOC_390_PLT64,
2613
2614 /* 32 bit rel. offset to GOT entry. */
2615   BFD_RELOC_390_GOTENT,
2616
2617 /* These two relocations are used by the linker to determine which of
2618 the entries in a C++ virtual function table are actually used.  When
2619 the --gc-sections option is given, the linker will zero out the entries
2620 that are not used, so that the code for those functions need not be
2621 included in the output.
2622
2623 VTABLE_INHERIT is a zero-space relocation used to describe to the
2624 linker the inheritence tree of a C++ virtual function table.  The
2625 relocation's symbol should be the parent class' vtable, and the
2626 relocation should be located at the child vtable.
2627
2628 VTABLE_ENTRY is a zero-space relocation that describes the use of a
2629 virtual function table entry.  The reloc's symbol should refer to the
2630 table of the class mentioned in the code.  Off of that base, an offset
2631 describes the entry that is being used.  For Rela hosts, this offset
2632 is stored in the reloc's addend.  For Rel hosts, we are forced to put
2633 this offset in the reloc's section offset. */
2634   BFD_RELOC_VTABLE_INHERIT,
2635   BFD_RELOC_VTABLE_ENTRY,
2636
2637 /* Intel IA64 Relocations. */
2638   BFD_RELOC_IA64_IMM14,
2639   BFD_RELOC_IA64_IMM22,
2640   BFD_RELOC_IA64_IMM64,
2641   BFD_RELOC_IA64_DIR32MSB,
2642   BFD_RELOC_IA64_DIR32LSB,
2643   BFD_RELOC_IA64_DIR64MSB,
2644   BFD_RELOC_IA64_DIR64LSB,
2645   BFD_RELOC_IA64_GPREL22,
2646   BFD_RELOC_IA64_GPREL64I,
2647   BFD_RELOC_IA64_GPREL32MSB,
2648   BFD_RELOC_IA64_GPREL32LSB,
2649   BFD_RELOC_IA64_GPREL64MSB,
2650   BFD_RELOC_IA64_GPREL64LSB,
2651   BFD_RELOC_IA64_LTOFF22,
2652   BFD_RELOC_IA64_LTOFF64I,
2653   BFD_RELOC_IA64_PLTOFF22,
2654   BFD_RELOC_IA64_PLTOFF64I,
2655   BFD_RELOC_IA64_PLTOFF64MSB,
2656   BFD_RELOC_IA64_PLTOFF64LSB,
2657   BFD_RELOC_IA64_FPTR64I,
2658   BFD_RELOC_IA64_FPTR32MSB,
2659   BFD_RELOC_IA64_FPTR32LSB,
2660   BFD_RELOC_IA64_FPTR64MSB,
2661   BFD_RELOC_IA64_FPTR64LSB,
2662   BFD_RELOC_IA64_PCREL21B,
2663   BFD_RELOC_IA64_PCREL21BI,
2664   BFD_RELOC_IA64_PCREL21M,
2665   BFD_RELOC_IA64_PCREL21F,
2666   BFD_RELOC_IA64_PCREL22,
2667   BFD_RELOC_IA64_PCREL60B,
2668   BFD_RELOC_IA64_PCREL64I,
2669   BFD_RELOC_IA64_PCREL32MSB,
2670   BFD_RELOC_IA64_PCREL32LSB,
2671   BFD_RELOC_IA64_PCREL64MSB,
2672   BFD_RELOC_IA64_PCREL64LSB,
2673   BFD_RELOC_IA64_LTOFF_FPTR22,
2674   BFD_RELOC_IA64_LTOFF_FPTR64I,
2675   BFD_RELOC_IA64_LTOFF_FPTR32MSB,
2676   BFD_RELOC_IA64_LTOFF_FPTR32LSB,
2677   BFD_RELOC_IA64_LTOFF_FPTR64MSB,
2678   BFD_RELOC_IA64_LTOFF_FPTR64LSB,
2679   BFD_RELOC_IA64_SEGREL32MSB,
2680   BFD_RELOC_IA64_SEGREL32LSB,
2681   BFD_RELOC_IA64_SEGREL64MSB,
2682   BFD_RELOC_IA64_SEGREL64LSB,
2683   BFD_RELOC_IA64_SECREL32MSB,
2684   BFD_RELOC_IA64_SECREL32LSB,
2685   BFD_RELOC_IA64_SECREL64MSB,
2686   BFD_RELOC_IA64_SECREL64LSB,
2687   BFD_RELOC_IA64_REL32MSB,
2688   BFD_RELOC_IA64_REL32LSB,
2689   BFD_RELOC_IA64_REL64MSB,
2690   BFD_RELOC_IA64_REL64LSB,
2691   BFD_RELOC_IA64_LTV32MSB,
2692   BFD_RELOC_IA64_LTV32LSB,
2693   BFD_RELOC_IA64_LTV64MSB,
2694   BFD_RELOC_IA64_LTV64LSB,
2695   BFD_RELOC_IA64_IPLTMSB,
2696   BFD_RELOC_IA64_IPLTLSB,
2697   BFD_RELOC_IA64_COPY,
2698   BFD_RELOC_IA64_TPREL22,
2699   BFD_RELOC_IA64_TPREL64MSB,
2700   BFD_RELOC_IA64_TPREL64LSB,
2701   BFD_RELOC_IA64_LTOFF_TP22,
2702   BFD_RELOC_IA64_LTOFF22X,
2703   BFD_RELOC_IA64_LDXMOV,
2704
2705 /* Motorola 68HC11 reloc.
2706 This is the 8 bits high part of an absolute address. */
2707   BFD_RELOC_M68HC11_HI8,
2708
2709 /* Motorola 68HC11 reloc.
2710 This is the 8 bits low part of an absolute address. */
2711   BFD_RELOC_M68HC11_LO8,
2712
2713 /* Motorola 68HC11 reloc.
2714 This is the 3 bits of a value. */
2715   BFD_RELOC_M68HC11_3B,
2716
2717 /* These relocs are only used within the CRIS assembler.  They are not
2718 (at present) written to any object files. */
2719   BFD_RELOC_CRIS_BDISP8,
2720   BFD_RELOC_CRIS_UNSIGNED_5,
2721   BFD_RELOC_CRIS_SIGNED_6,
2722   BFD_RELOC_CRIS_UNSIGNED_6,
2723   BFD_RELOC_CRIS_UNSIGNED_4,
2724
2725 /* Relocs used in ELF shared libraries for CRIS. */
2726   BFD_RELOC_CRIS_COPY,
2727   BFD_RELOC_CRIS_GLOB_DAT,
2728   BFD_RELOC_CRIS_JUMP_SLOT,
2729   BFD_RELOC_CRIS_RELATIVE,
2730
2731 /* 32-bit offset to symbol-entry within GOT. */
2732   BFD_RELOC_CRIS_32_GOT,
2733
2734 /* 16-bit offset to symbol-entry within GOT. */
2735   BFD_RELOC_CRIS_16_GOT,
2736
2737 /* 32-bit offset to symbol-entry within GOT, with PLT handling. */
2738   BFD_RELOC_CRIS_32_GOTPLT,
2739
2740 /* 16-bit offset to symbol-entry within GOT, with PLT handling. */
2741   BFD_RELOC_CRIS_16_GOTPLT,
2742
2743 /* 32-bit offset to symbol, relative to GOT. */
2744   BFD_RELOC_CRIS_32_GOTREL,
2745
2746 /* 32-bit offset to symbol with PLT entry, relative to GOT. */
2747   BFD_RELOC_CRIS_32_PLT_GOTREL,
2748
2749 /* 32-bit offset to symbol with PLT entry, relative to this relocation. */
2750   BFD_RELOC_CRIS_32_PLT_PCREL,
2751
2752 /* Intel i860 Relocations. */
2753   BFD_RELOC_860_COPY,
2754   BFD_RELOC_860_GLOB_DAT,
2755   BFD_RELOC_860_JUMP_SLOT,
2756   BFD_RELOC_860_RELATIVE,
2757   BFD_RELOC_860_PC26,
2758   BFD_RELOC_860_PLT26,
2759   BFD_RELOC_860_PC16,
2760   BFD_RELOC_860_LOW0,
2761   BFD_RELOC_860_SPLIT0,
2762   BFD_RELOC_860_LOW1,
2763   BFD_RELOC_860_SPLIT1,
2764   BFD_RELOC_860_LOW2,
2765   BFD_RELOC_860_SPLIT2,
2766   BFD_RELOC_860_LOW3,
2767   BFD_RELOC_860_LOGOT0,
2768   BFD_RELOC_860_SPGOT0,
2769   BFD_RELOC_860_LOGOT1,
2770   BFD_RELOC_860_SPGOT1,
2771   BFD_RELOC_860_LOGOTOFF0,
2772   BFD_RELOC_860_SPGOTOFF0,
2773   BFD_RELOC_860_LOGOTOFF1,
2774   BFD_RELOC_860_SPGOTOFF1,
2775   BFD_RELOC_860_LOGOTOFF2,
2776   BFD_RELOC_860_LOGOTOFF3,
2777   BFD_RELOC_860_LOPC,
2778   BFD_RELOC_860_HIGHADJ,
2779   BFD_RELOC_860_HAGOT,
2780   BFD_RELOC_860_HAGOTOFF,
2781   BFD_RELOC_860_HAPC,
2782   BFD_RELOC_860_HIGH,
2783   BFD_RELOC_860_HIGOT,
2784   BFD_RELOC_860_HIGOTOFF,
2785
2786 /* OpenRISC Relocations. */
2787   BFD_RELOC_OPENRISC_ABS_26,
2788   BFD_RELOC_OPENRISC_REL_26,
2789   BFD_RELOC_UNUSED };
2790 typedef enum bfd_reloc_code_real bfd_reloc_code_real_type;
2791 reloc_howto_type *
2792 bfd_reloc_type_lookup PARAMS ((bfd *abfd, bfd_reloc_code_real_type code));
2793
2794 const char *
2795 bfd_get_reloc_code_name PARAMS ((bfd_reloc_code_real_type code));
2796
2797
2798 typedef struct symbol_cache_entry
2799 {
2800        /* A pointer to the BFD which owns the symbol. This information
2801           is necessary so that a back end can work out what additional
2802           information (invisible to the application writer) is carried
2803           with the symbol.
2804
2805           This field is *almost* redundant, since you can use section->owner
2806           instead, except that some symbols point to the global sections
2807           bfd_{abs,com,und}_section.  This could be fixed by making
2808           these globals be per-bfd (or per-target-flavor).  FIXME. */
2809
2810   struct _bfd *the_bfd; /* Use bfd_asymbol_bfd(sym) to access this field. */
2811
2812        /* The text of the symbol. The name is left alone, and not copied; the
2813           application may not alter it. */
2814   CONST char *name;
2815
2816        /* The value of the symbol.  This really should be a union of a
2817           numeric value with a pointer, since some flags indicate that
2818           a pointer to another symbol is stored here.  */
2819   symvalue value;
2820
2821        /* Attributes of a symbol: */
2822
2823 #define BSF_NO_FLAGS    0x00
2824
2825        /* The symbol has local scope; <<static>> in <<C>>. The value
2826           is the offset into the section of the data. */
2827 #define BSF_LOCAL      0x01
2828
2829        /* The symbol has global scope; initialized data in <<C>>. The
2830           value is the offset into the section of the data. */
2831 #define BSF_GLOBAL     0x02
2832
2833        /* The symbol has global scope and is exported. The value is
2834           the offset into the section of the data. */
2835 #define BSF_EXPORT     BSF_GLOBAL /* no real difference */
2836
2837        /* A normal C symbol would be one of:
2838           <<BSF_LOCAL>>, <<BSF_FORT_COMM>>,  <<BSF_UNDEFINED>> or
2839           <<BSF_GLOBAL>> */
2840
2841        /* The symbol is a debugging record. The value has an arbitary
2842           meaning, unless BSF_DEBUGGING_RELOC is also set.  */
2843 #define BSF_DEBUGGING  0x08
2844
2845        /* The symbol denotes a function entry point.  Used in ELF,
2846           perhaps others someday.  */
2847 #define BSF_FUNCTION    0x10
2848
2849        /* Used by the linker. */
2850 #define BSF_KEEP        0x20
2851 #define BSF_KEEP_G      0x40
2852
2853        /* A weak global symbol, overridable without warnings by
2854           a regular global symbol of the same name.  */
2855 #define BSF_WEAK        0x80
2856
2857        /* This symbol was created to point to a section, e.g. ELF's
2858           STT_SECTION symbols.  */
2859 #define BSF_SECTION_SYM 0x100
2860
2861        /* The symbol used to be a common symbol, but now it is
2862           allocated. */
2863 #define BSF_OLD_COMMON  0x200
2864
2865        /* The default value for common data. */
2866 #define BFD_FORT_COMM_DEFAULT_VALUE 0
2867
2868        /* In some files the type of a symbol sometimes alters its
2869           location in an output file - ie in coff a <<ISFCN>> symbol
2870           which is also <<C_EXT>> symbol appears where it was
2871           declared and not at the end of a section.  This bit is set
2872           by the target BFD part to convey this information. */
2873
2874 #define BSF_NOT_AT_END    0x400
2875
2876        /* Signal that the symbol is the label of constructor section. */
2877 #define BSF_CONSTRUCTOR   0x800
2878
2879        /* Signal that the symbol is a warning symbol.  The name is a
2880           warning.  The name of the next symbol is the one to warn about;
2881           if a reference is made to a symbol with the same name as the next
2882           symbol, a warning is issued by the linker. */
2883 #define BSF_WARNING       0x1000
2884
2885        /* Signal that the symbol is indirect.  This symbol is an indirect
2886           pointer to the symbol with the same name as the next symbol. */
2887 #define BSF_INDIRECT      0x2000
2888
2889        /* BSF_FILE marks symbols that contain a file name.  This is used
2890           for ELF STT_FILE symbols.  */
2891 #define BSF_FILE          0x4000
2892
2893        /* Symbol is from dynamic linking information.  */
2894 #define BSF_DYNAMIC       0x8000
2895
2896        /* The symbol denotes a data object.  Used in ELF, and perhaps
2897           others someday.  */
2898 #define BSF_OBJECT        0x10000
2899
2900        /* This symbol is a debugging symbol.  The value is the offset
2901           into the section of the data.  BSF_DEBUGGING should be set
2902           as well.  */
2903 #define BSF_DEBUGGING_RELOC 0x20000
2904
2905   flagword flags;
2906
2907        /* A pointer to the section to which this symbol is
2908           relative.  This will always be non NULL, there are special
2909           sections for undefined and absolute symbols.  */
2910   struct sec *section;
2911
2912        /* Back end special data.  */
2913   union
2914     {
2915       PTR p;
2916       bfd_vma i;
2917     } udata;
2918
2919 } asymbol;
2920 #define bfd_get_symtab_upper_bound(abfd) \
2921      BFD_SEND (abfd, _bfd_get_symtab_upper_bound, (abfd))
2922 boolean
2923 bfd_is_local_label PARAMS ((bfd *abfd, asymbol *sym));
2924
2925 boolean
2926 bfd_is_local_label_name PARAMS ((bfd *abfd, const char *name));
2927
2928 #define bfd_is_local_label_name(abfd, name) \
2929      BFD_SEND (abfd, _bfd_is_local_label_name, (abfd, name))
2930 #define bfd_canonicalize_symtab(abfd, location) \
2931      BFD_SEND (abfd, _bfd_canonicalize_symtab,\
2932                   (abfd, location))
2933 boolean
2934 bfd_set_symtab PARAMS ((bfd *abfd, asymbol **location, unsigned int count));
2935
2936 void
2937 bfd_print_symbol_vandf PARAMS ((PTR file, asymbol *symbol));
2938
2939 #define bfd_make_empty_symbol(abfd) \
2940      BFD_SEND (abfd, _bfd_make_empty_symbol, (abfd))
2941 #define bfd_make_debug_symbol(abfd,ptr,size) \
2942         BFD_SEND (abfd, _bfd_make_debug_symbol, (abfd, ptr, size))
2943 int
2944 bfd_decode_symclass PARAMS ((asymbol *symbol));
2945
2946 boolean
2947 bfd_is_undefined_symclass PARAMS ((int symclass));
2948
2949 void
2950 bfd_symbol_info PARAMS ((asymbol *symbol, symbol_info *ret));
2951
2952 boolean
2953 bfd_copy_private_symbol_data PARAMS ((bfd *ibfd, asymbol *isym, bfd *obfd, asymbol *osym));
2954
2955 #define bfd_copy_private_symbol_data(ibfd, isymbol, obfd, osymbol) \
2956      BFD_SEND (obfd, _bfd_copy_private_symbol_data, \
2957                (ibfd, isymbol, obfd, osymbol))
2958 struct _bfd
2959 {
2960     /* The filename the application opened the BFD with.  */
2961     CONST char *filename;
2962
2963     /* A pointer to the target jump table.             */
2964     const struct bfd_target *xvec;
2965
2966     /* To avoid dragging too many header files into every file that
2967        includes `<<bfd.h>>', IOSTREAM has been declared as a "char
2968        *", and MTIME as a "long".  Their correct types, to which they
2969        are cast when used, are "FILE *" and "time_t".    The iostream
2970        is the result of an fopen on the filename.  However, if the
2971        BFD_IN_MEMORY flag is set, then iostream is actually a pointer
2972        to a bfd_in_memory struct.  */
2973     PTR iostream;
2974
2975     /* Is the file descriptor being cached?  That is, can it be closed as
2976        needed, and re-opened when accessed later?  */
2977
2978     boolean cacheable;
2979
2980     /* Marks whether there was a default target specified when the
2981        BFD was opened. This is used to select which matching algorithm
2982        to use to choose the back end. */
2983
2984     boolean target_defaulted;
2985
2986     /* The caching routines use these to maintain a
2987        least-recently-used list of BFDs */
2988
2989     struct _bfd *lru_prev, *lru_next;
2990
2991     /* When a file is closed by the caching routines, BFD retains
2992        state information on the file here: */
2993
2994     file_ptr where;
2995
2996     /* and here: (``once'' means at least once) */
2997
2998     boolean opened_once;
2999
3000     /* Set if we have a locally maintained mtime value, rather than
3001        getting it from the file each time: */
3002
3003     boolean mtime_set;
3004
3005     /* File modified time, if mtime_set is true: */
3006
3007     long mtime;
3008
3009     /* Reserved for an unimplemented file locking extension.*/
3010
3011     int ifd;
3012
3013     /* The format which belongs to the BFD. (object, core, etc.) */
3014
3015     bfd_format format;
3016
3017     /* The direction the BFD was opened with*/
3018
3019     enum bfd_direction {no_direction = 0,
3020                         read_direction = 1,
3021                         write_direction = 2,
3022                         both_direction = 3} direction;
3023
3024     /* Format_specific flags*/
3025
3026     flagword flags;
3027
3028     /* Currently my_archive is tested before adding origin to
3029        anything. I believe that this can become always an add of
3030        origin, with origin set to 0 for non archive files.   */
3031
3032     file_ptr origin;
3033
3034     /* Remember when output has begun, to stop strange things
3035        from happening. */
3036     boolean output_has_begun;
3037
3038     /* Pointer to linked list of sections*/
3039     struct sec  *sections;
3040
3041     /* The number of sections */
3042     unsigned int section_count;
3043
3044     /* Stuff only useful for object files:
3045        The start address. */
3046     bfd_vma start_address;
3047
3048     /* Used for input and output*/
3049     unsigned int symcount;
3050
3051     /* Symbol table for output BFD (with symcount entries) */
3052     struct symbol_cache_entry  **outsymbols;
3053
3054     /* Pointer to structure which contains architecture information*/
3055     const struct bfd_arch_info *arch_info;
3056
3057     /* Stuff only useful for archives:*/
3058     PTR arelt_data;
3059     struct _bfd *my_archive;     /* The containing archive BFD.  */
3060     struct _bfd *next;           /* The next BFD in the archive.  */
3061     struct _bfd *archive_head;   /* The first BFD in the archive.  */
3062     boolean has_armap;
3063
3064     /* A chain of BFD structures involved in a link.  */
3065     struct _bfd *link_next;
3066
3067     /* A field used by _bfd_generic_link_add_archive_symbols.  This will
3068        be used only for archive elements.  */
3069     int archive_pass;
3070
3071     /* Used by the back end to hold private data. */
3072
3073     union
3074       {
3075       struct aout_data_struct *aout_data;
3076       struct artdata *aout_ar_data;
3077       struct _oasys_data *oasys_obj_data;
3078       struct _oasys_ar_data *oasys_ar_data;
3079       struct coff_tdata *coff_obj_data;
3080       struct pe_tdata *pe_obj_data;
3081       struct xcoff_tdata *xcoff_obj_data;
3082       struct ecoff_tdata *ecoff_obj_data;
3083       struct ieee_data_struct *ieee_data;
3084       struct ieee_ar_data_struct *ieee_ar_data;
3085       struct srec_data_struct *srec_data;
3086       struct ihex_data_struct *ihex_data;
3087       struct tekhex_data_struct *tekhex_data;
3088       struct elf_obj_tdata *elf_obj_data;
3089       struct nlm_obj_tdata *nlm_obj_data;
3090       struct bout_data_struct *bout_data;
3091       struct sun_core_struct *sun_core_data;
3092       struct sco5_core_struct *sco5_core_data;
3093       struct trad_core_struct *trad_core_data;
3094       struct som_data_struct *som_data;
3095       struct hpux_core_struct *hpux_core_data;
3096       struct hppabsd_core_struct *hppabsd_core_data;
3097       struct sgi_core_struct *sgi_core_data;
3098       struct lynx_core_struct *lynx_core_data;
3099       struct osf_core_struct *osf_core_data;
3100       struct cisco_core_struct *cisco_core_data;
3101       struct versados_data_struct *versados_data;
3102       struct netbsd_core_struct *netbsd_core_data;
3103       PTR any;
3104       } tdata;
3105
3106     /* Used by the application to hold private data*/
3107     PTR usrdata;
3108
3109   /* Where all the allocated stuff under this BFD goes.  This is a
3110      struct objalloc *, but we use PTR to avoid requiring the inclusion of
3111      objalloc.h.  */
3112     PTR memory;
3113 };
3114
3115 typedef enum bfd_error
3116 {
3117   bfd_error_no_error = 0,
3118   bfd_error_system_call,
3119   bfd_error_invalid_target,
3120   bfd_error_wrong_format,
3121   bfd_error_invalid_operation,
3122   bfd_error_no_memory,
3123   bfd_error_no_symbols,
3124   bfd_error_no_armap,
3125   bfd_error_no_more_archived_files,
3126   bfd_error_malformed_archive,
3127   bfd_error_file_not_recognized,
3128   bfd_error_file_ambiguously_recognized,
3129   bfd_error_no_contents,
3130   bfd_error_nonrepresentable_section,
3131   bfd_error_no_debug_section,
3132   bfd_error_bad_value,
3133   bfd_error_file_truncated,
3134   bfd_error_file_too_big,
3135   bfd_error_invalid_error_code
3136 } bfd_error_type;
3137
3138 bfd_error_type
3139 bfd_get_error PARAMS ((void));
3140
3141 void
3142 bfd_set_error PARAMS ((bfd_error_type error_tag));
3143
3144 CONST char *
3145 bfd_errmsg PARAMS ((bfd_error_type error_tag));
3146
3147 void
3148 bfd_perror PARAMS ((CONST char *message));
3149
3150 typedef void (*bfd_error_handler_type) PARAMS ((const char *, ...));
3151
3152 bfd_error_handler_type
3153 bfd_set_error_handler PARAMS ((bfd_error_handler_type));
3154
3155 void
3156 bfd_set_error_program_name PARAMS ((const char *));
3157
3158 bfd_error_handler_type
3159 bfd_get_error_handler PARAMS ((void));
3160
3161 long
3162 bfd_get_reloc_upper_bound PARAMS ((bfd *abfd, asection *sect));
3163
3164 long
3165 bfd_canonicalize_reloc PARAMS ((bfd *abfd,
3166     asection *sec,
3167     arelent **loc,
3168     asymbol **syms));
3169
3170 void
3171 bfd_set_reloc PARAMS ((bfd *abfd, asection *sec, arelent **rel, unsigned int count)
3172
3173     );
3174
3175 boolean
3176 bfd_set_file_flags PARAMS ((bfd *abfd, flagword flags));
3177
3178 int
3179 bfd_get_arch_size PARAMS ((bfd *abfd));
3180
3181 int
3182 bfd_get_sign_extend_vma PARAMS ((bfd *abfd));
3183
3184 boolean
3185 bfd_set_start_address PARAMS ((bfd *abfd, bfd_vma vma));
3186
3187 long
3188 bfd_get_mtime PARAMS ((bfd *abfd));
3189
3190 long
3191 bfd_get_size PARAMS ((bfd *abfd));
3192
3193 int
3194 bfd_get_gp_size PARAMS ((bfd *abfd));
3195
3196 void
3197 bfd_set_gp_size PARAMS ((bfd *abfd, int i));
3198
3199 bfd_vma
3200 bfd_scan_vma PARAMS ((CONST char *string, CONST char **end, int base));
3201
3202 boolean
3203 bfd_copy_private_bfd_data PARAMS ((bfd *ibfd, bfd *obfd));
3204
3205 #define bfd_copy_private_bfd_data(ibfd, obfd) \
3206      BFD_SEND (obfd, _bfd_copy_private_bfd_data, \
3207                (ibfd, obfd))
3208 boolean
3209 bfd_merge_private_bfd_data PARAMS ((bfd *ibfd, bfd *obfd));
3210
3211 #define bfd_merge_private_bfd_data(ibfd, obfd) \
3212      BFD_SEND (obfd, _bfd_merge_private_bfd_data, \
3213                (ibfd, obfd))
3214 boolean
3215 bfd_set_private_flags PARAMS ((bfd *abfd, flagword flags));
3216
3217 #define bfd_set_private_flags(abfd, flags) \
3218      BFD_SEND (abfd, _bfd_set_private_flags, \
3219                (abfd, flags))
3220 #define bfd_sizeof_headers(abfd, reloc) \
3221      BFD_SEND (abfd, _bfd_sizeof_headers, (abfd, reloc))
3222
3223 #define bfd_find_nearest_line(abfd, sec, syms, off, file, func, line) \
3224      BFD_SEND (abfd, _bfd_find_nearest_line,  (abfd, sec, syms, off, file, func, line))
3225
3226        /* Do these three do anything useful at all, for any back end?  */
3227 #define bfd_debug_info_start(abfd) \
3228         BFD_SEND (abfd, _bfd_debug_info_start, (abfd))
3229
3230 #define bfd_debug_info_end(abfd) \
3231         BFD_SEND (abfd, _bfd_debug_info_end, (abfd))
3232
3233 #define bfd_debug_info_accumulate(abfd, section) \
3234         BFD_SEND (abfd, _bfd_debug_info_accumulate, (abfd, section))
3235
3236
3237 #define bfd_stat_arch_elt(abfd, stat) \
3238         BFD_SEND (abfd, _bfd_stat_arch_elt,(abfd, stat))
3239
3240 #define bfd_update_armap_timestamp(abfd) \
3241         BFD_SEND (abfd, _bfd_update_armap_timestamp, (abfd))
3242
3243 #define bfd_set_arch_mach(abfd, arch, mach)\
3244         BFD_SEND ( abfd, _bfd_set_arch_mach, (abfd, arch, mach))
3245
3246 #define bfd_relax_section(abfd, section, link_info, again) \
3247        BFD_SEND (abfd, _bfd_relax_section, (abfd, section, link_info, again))
3248
3249 #define bfd_gc_sections(abfd, link_info) \
3250        BFD_SEND (abfd, _bfd_gc_sections, (abfd, link_info))
3251
3252 #define bfd_merge_sections(abfd, link_info) \
3253        BFD_SEND (abfd, _bfd_merge_sections, (abfd, link_info))
3254
3255 #define bfd_link_hash_table_create(abfd) \
3256        BFD_SEND (abfd, _bfd_link_hash_table_create, (abfd))
3257
3258 #define bfd_link_add_symbols(abfd, info) \
3259        BFD_SEND (abfd, _bfd_link_add_symbols, (abfd, info))
3260
3261 #define bfd_final_link(abfd, info) \
3262        BFD_SEND (abfd, _bfd_final_link, (abfd, info))
3263
3264 #define bfd_free_cached_info(abfd) \
3265        BFD_SEND (abfd, _bfd_free_cached_info, (abfd))
3266
3267 #define bfd_get_dynamic_symtab_upper_bound(abfd) \
3268        BFD_SEND (abfd, _bfd_get_dynamic_symtab_upper_bound, (abfd))
3269
3270 #define bfd_print_private_bfd_data(abfd, file)\
3271        BFD_SEND (abfd, _bfd_print_private_bfd_data, (abfd, file))
3272
3273 #define bfd_canonicalize_dynamic_symtab(abfd, asymbols) \
3274        BFD_SEND (abfd, _bfd_canonicalize_dynamic_symtab, (abfd, asymbols))
3275
3276 #define bfd_get_dynamic_reloc_upper_bound(abfd) \
3277        BFD_SEND (abfd, _bfd_get_dynamic_reloc_upper_bound, (abfd))
3278
3279 #define bfd_canonicalize_dynamic_reloc(abfd, arels, asyms) \
3280        BFD_SEND (abfd, _bfd_canonicalize_dynamic_reloc, (abfd, arels, asyms))
3281
3282 extern bfd_byte *bfd_get_relocated_section_contents
3283        PARAMS ((bfd *, struct bfd_link_info *,
3284                  struct bfd_link_order *, bfd_byte *,
3285                  boolean, asymbol **));
3286
3287 symindex
3288 bfd_get_next_mapent PARAMS ((bfd *abfd, symindex previous, carsym **sym));
3289
3290 boolean
3291 bfd_set_archive_head PARAMS ((bfd *output, bfd *new_head));
3292
3293 bfd *
3294 bfd_openr_next_archived_file PARAMS ((bfd *archive, bfd *previous));
3295
3296 CONST char *
3297 bfd_core_file_failing_command PARAMS ((bfd *abfd));
3298
3299 int
3300 bfd_core_file_failing_signal PARAMS ((bfd *abfd));
3301
3302 boolean
3303 core_file_matches_executable_p PARAMS ((bfd *core_bfd, bfd *exec_bfd));
3304
3305 #define BFD_SEND(bfd, message, arglist) \
3306                ((*((bfd)->xvec->message)) arglist)
3307
3308 #ifdef DEBUG_BFD_SEND
3309 #undef BFD_SEND
3310 #define BFD_SEND(bfd, message, arglist) \
3311   (((bfd) && (bfd)->xvec && (bfd)->xvec->message) ? \
3312     ((*((bfd)->xvec->message)) arglist) : \
3313     (bfd_assert (__FILE__,__LINE__), NULL))
3314 #endif
3315 #define BFD_SEND_FMT(bfd, message, arglist) \
3316             (((bfd)->xvec->message[(int) ((bfd)->format)]) arglist)
3317
3318 #ifdef DEBUG_BFD_SEND
3319 #undef BFD_SEND_FMT
3320 #define BFD_SEND_FMT(bfd, message, arglist) \
3321   (((bfd) && (bfd)->xvec && (bfd)->xvec->message) ? \
3322    (((bfd)->xvec->message[(int) ((bfd)->format)]) arglist) : \
3323    (bfd_assert (__FILE__,__LINE__), NULL))
3324 #endif
3325 enum bfd_flavour {
3326   bfd_target_unknown_flavour,
3327   bfd_target_aout_flavour,
3328   bfd_target_coff_flavour,
3329   bfd_target_ecoff_flavour,
3330   bfd_target_xcoff_flavour,
3331   bfd_target_elf_flavour,
3332   bfd_target_ieee_flavour,
3333   bfd_target_nlm_flavour,
3334   bfd_target_oasys_flavour,
3335   bfd_target_tekhex_flavour,
3336   bfd_target_srec_flavour,
3337   bfd_target_ihex_flavour,
3338   bfd_target_som_flavour,
3339   bfd_target_os9k_flavour,
3340   bfd_target_versados_flavour,
3341   bfd_target_msdos_flavour,
3342   bfd_target_ovax_flavour,
3343   bfd_target_evax_flavour
3344 };
3345
3346 enum bfd_endian { BFD_ENDIAN_BIG, BFD_ENDIAN_LITTLE, BFD_ENDIAN_UNKNOWN };
3347
3348 /* Forward declaration.  */
3349 typedef struct bfd_link_info _bfd_link_info;
3350
3351 typedef struct bfd_target
3352 {
3353   char *name;
3354   enum bfd_flavour flavour;
3355   enum bfd_endian byteorder;
3356   enum bfd_endian header_byteorder;
3357   flagword object_flags;
3358   flagword section_flags;
3359   char symbol_leading_char;
3360   char ar_pad_char;
3361   unsigned short ar_max_namelen;
3362   bfd_vma      (*bfd_getx64) PARAMS ((const bfd_byte *));
3363   bfd_signed_vma (*bfd_getx_signed_64) PARAMS ((const bfd_byte *));
3364   void         (*bfd_putx64) PARAMS ((bfd_vma, bfd_byte *));
3365   bfd_vma      (*bfd_getx32) PARAMS ((const bfd_byte *));
3366   bfd_signed_vma (*bfd_getx_signed_32) PARAMS ((const bfd_byte *));
3367   void         (*bfd_putx32) PARAMS ((bfd_vma, bfd_byte *));
3368   bfd_vma      (*bfd_getx16) PARAMS ((const bfd_byte *));
3369   bfd_signed_vma (*bfd_getx_signed_16) PARAMS ((const bfd_byte *));
3370   void         (*bfd_putx16) PARAMS ((bfd_vma, bfd_byte *));
3371   bfd_vma      (*bfd_h_getx64) PARAMS ((const bfd_byte *));
3372   bfd_signed_vma (*bfd_h_getx_signed_64) PARAMS ((const bfd_byte *));
3373   void         (*bfd_h_putx64) PARAMS ((bfd_vma, bfd_byte *));
3374   bfd_vma      (*bfd_h_getx32) PARAMS ((const bfd_byte *));
3375   bfd_signed_vma (*bfd_h_getx_signed_32) PARAMS ((const bfd_byte *));
3376   void         (*bfd_h_putx32) PARAMS ((bfd_vma, bfd_byte *));
3377   bfd_vma      (*bfd_h_getx16) PARAMS ((const bfd_byte *));
3378   bfd_signed_vma (*bfd_h_getx_signed_16) PARAMS ((const bfd_byte *));
3379   void         (*bfd_h_putx16) PARAMS ((bfd_vma, bfd_byte *));
3380   const struct bfd_target *(*_bfd_check_format[bfd_type_end]) PARAMS ((bfd *));
3381   boolean             (*_bfd_set_format[bfd_type_end]) PARAMS ((bfd *));
3382   boolean             (*_bfd_write_contents[bfd_type_end]) PARAMS ((bfd *));
3383
3384   /* Generic entry points.  */
3385 #define BFD_JUMP_TABLE_GENERIC(NAME)\
3386 CAT(NAME,_close_and_cleanup),\
3387 CAT(NAME,_bfd_free_cached_info),\
3388 CAT(NAME,_new_section_hook),\
3389 CAT(NAME,_get_section_contents),\
3390 CAT(NAME,_get_section_contents_in_window)
3391
3392   /* Called when the BFD is being closed to do any necessary cleanup.  */
3393   boolean       (*_close_and_cleanup) PARAMS ((bfd *));
3394   /* Ask the BFD to free all cached information.  */
3395   boolean (*_bfd_free_cached_info) PARAMS ((bfd *));
3396   /* Called when a new section is created.  */
3397   boolean       (*_new_section_hook) PARAMS ((bfd *, sec_ptr));
3398   /* Read the contents of a section.  */
3399   boolean       (*_bfd_get_section_contents) PARAMS ((bfd *, sec_ptr, PTR,
3400                                             file_ptr, bfd_size_type));
3401   boolean       (*_bfd_get_section_contents_in_window)
3402                           PARAMS ((bfd *, sec_ptr, bfd_window *,
3403                                    file_ptr, bfd_size_type));
3404
3405   /* Entry points to copy private data.  */
3406 #define BFD_JUMP_TABLE_COPY(NAME)\
3407 CAT(NAME,_bfd_copy_private_bfd_data),\
3408 CAT(NAME,_bfd_merge_private_bfd_data),\
3409 CAT(NAME,_bfd_copy_private_section_data),\
3410 CAT(NAME,_bfd_copy_private_symbol_data),\
3411 CAT(NAME,_bfd_set_private_flags),\
3412 CAT(NAME,_bfd_print_private_bfd_data)\
3413   /* Called to copy BFD general private data from one object file
3414      to another.  */
3415   boolean       (*_bfd_copy_private_bfd_data) PARAMS ((bfd *, bfd *));
3416   /* Called to merge BFD general private data from one object file
3417      to a common output file when linking.  */
3418   boolean       (*_bfd_merge_private_bfd_data) PARAMS ((bfd *, bfd *));
3419   /* Called to copy BFD private section data from one object file
3420      to another.  */
3421   boolean       (*_bfd_copy_private_section_data) PARAMS ((bfd *, sec_ptr,
3422                                                        bfd *, sec_ptr));
3423   /* Called to copy BFD private symbol data from one symbol
3424      to another.  */
3425   boolean       (*_bfd_copy_private_symbol_data) PARAMS ((bfd *, asymbol *,
3426                                                           bfd *, asymbol *));
3427   /* Called to set private backend flags */
3428   boolean       (*_bfd_set_private_flags) PARAMS ((bfd *, flagword));
3429
3430   /* Called to print private BFD data */
3431   boolean       (*_bfd_print_private_bfd_data) PARAMS ((bfd *, PTR));
3432
3433   /* Core file entry points.  */
3434 #define BFD_JUMP_TABLE_CORE(NAME)\
3435 CAT(NAME,_core_file_failing_command),\
3436 CAT(NAME,_core_file_failing_signal),\
3437 CAT(NAME,_core_file_matches_executable_p)
3438   char *   (*_core_file_failing_command) PARAMS ((bfd *));
3439   int      (*_core_file_failing_signal) PARAMS ((bfd *));
3440   boolean  (*_core_file_matches_executable_p) PARAMS ((bfd *, bfd *));
3441
3442   /* Archive entry points.  */
3443 #define BFD_JUMP_TABLE_ARCHIVE(NAME)\
3444 CAT(NAME,_slurp_armap),\
3445 CAT(NAME,_slurp_extended_name_table),\
3446 CAT(NAME,_construct_extended_name_table),\
3447 CAT(NAME,_truncate_arname),\
3448 CAT(NAME,_write_armap),\
3449 CAT(NAME,_read_ar_hdr),\
3450 CAT(NAME,_openr_next_archived_file),\
3451 CAT(NAME,_get_elt_at_index),\
3452 CAT(NAME,_generic_stat_arch_elt),\
3453 CAT(NAME,_update_armap_timestamp)
3454   boolean  (*_bfd_slurp_armap) PARAMS ((bfd *));
3455   boolean  (*_bfd_slurp_extended_name_table) PARAMS ((bfd *));
3456   boolean  (*_bfd_construct_extended_name_table)
3457              PARAMS ((bfd *, char **, bfd_size_type *, const char **));
3458   void     (*_bfd_truncate_arname) PARAMS ((bfd *, CONST char *, char *));
3459   boolean  (*write_armap) PARAMS ((bfd *arch,
3460                               unsigned int elength,
3461                               struct orl *map,
3462                               unsigned int orl_count,
3463                               int stridx));
3464   PTR (*_bfd_read_ar_hdr_fn) PARAMS ((bfd *));
3465   bfd *    (*openr_next_archived_file) PARAMS ((bfd *arch, bfd *prev));
3466 #define bfd_get_elt_at_index(b,i) BFD_SEND(b, _bfd_get_elt_at_index, (b,i))
3467   bfd *    (*_bfd_get_elt_at_index) PARAMS ((bfd *, symindex));
3468   int      (*_bfd_stat_arch_elt) PARAMS ((bfd *, struct stat *));
3469   boolean  (*_bfd_update_armap_timestamp) PARAMS ((bfd *));
3470
3471   /* Entry points used for symbols.  */
3472 #define BFD_JUMP_TABLE_SYMBOLS(NAME)\
3473 CAT(NAME,_get_symtab_upper_bound),\
3474 CAT(NAME,_get_symtab),\
3475 CAT(NAME,_make_empty_symbol),\
3476 CAT(NAME,_print_symbol),\
3477 CAT(NAME,_get_symbol_info),\
3478 CAT(NAME,_bfd_is_local_label_name),\
3479 CAT(NAME,_get_lineno),\
3480 CAT(NAME,_find_nearest_line),\
3481 CAT(NAME,_bfd_make_debug_symbol),\
3482 CAT(NAME,_read_minisymbols),\
3483 CAT(NAME,_minisymbol_to_symbol)
3484   long  (*_bfd_get_symtab_upper_bound) PARAMS ((bfd *));
3485   long  (*_bfd_canonicalize_symtab) PARAMS ((bfd *,
3486                                              struct symbol_cache_entry **));
3487   struct symbol_cache_entry  *
3488                 (*_bfd_make_empty_symbol) PARAMS ((bfd *));
3489   void          (*_bfd_print_symbol) PARAMS ((bfd *, PTR,
3490                                       struct symbol_cache_entry *,
3491                                       bfd_print_symbol_type));
3492 #define bfd_print_symbol(b,p,s,e) BFD_SEND(b, _bfd_print_symbol, (b,p,s,e))
3493   void          (*_bfd_get_symbol_info) PARAMS ((bfd *,
3494                                       struct symbol_cache_entry *,
3495                                       symbol_info *));
3496 #define bfd_get_symbol_info(b,p,e) BFD_SEND(b, _bfd_get_symbol_info, (b,p,e))
3497   boolean       (*_bfd_is_local_label_name) PARAMS ((bfd *, const char *));
3498
3499   alent *    (*_get_lineno) PARAMS ((bfd *, struct symbol_cache_entry *));
3500   boolean    (*_bfd_find_nearest_line) PARAMS ((bfd *abfd,
3501                     struct sec *section, struct symbol_cache_entry **symbols,
3502                     bfd_vma offset, CONST char **file, CONST char **func,
3503                     unsigned int *line));
3504  /* Back-door to allow format-aware applications to create debug symbols
3505     while using BFD for everything else.  Currently used by the assembler
3506     when creating COFF files.  */
3507   asymbol *  (*_bfd_make_debug_symbol) PARAMS ((
3508        bfd *abfd,
3509        void *ptr,
3510        unsigned long size));
3511 #define bfd_read_minisymbols(b, d, m, s) \
3512   BFD_SEND (b, _read_minisymbols, (b, d, m, s))
3513   long  (*_read_minisymbols) PARAMS ((bfd *, boolean, PTR *,
3514                                       unsigned int *));
3515 #define bfd_minisymbol_to_symbol(b, d, m, f) \
3516   BFD_SEND (b, _minisymbol_to_symbol, (b, d, m, f))
3517   asymbol *(*_minisymbol_to_symbol) PARAMS ((bfd *, boolean, const PTR,
3518                                              asymbol *));
3519
3520   /* Routines for relocs.  */
3521 #define BFD_JUMP_TABLE_RELOCS(NAME)\
3522 CAT(NAME,_get_reloc_upper_bound),\
3523 CAT(NAME,_canonicalize_reloc),\
3524 CAT(NAME,_bfd_reloc_type_lookup)
3525   long  (*_get_reloc_upper_bound) PARAMS ((bfd *, sec_ptr));
3526   long  (*_bfd_canonicalize_reloc) PARAMS ((bfd *, sec_ptr, arelent **,
3527                                             struct symbol_cache_entry **));
3528   /* See documentation on reloc types.  */
3529   reloc_howto_type *
3530        (*reloc_type_lookup) PARAMS ((bfd *abfd,
3531                                      bfd_reloc_code_real_type code));
3532
3533   /* Routines used when writing an object file.  */
3534 #define BFD_JUMP_TABLE_WRITE(NAME)\
3535 CAT(NAME,_set_arch_mach),\
3536 CAT(NAME,_set_section_contents)
3537   boolean    (*_bfd_set_arch_mach) PARAMS ((bfd *, enum bfd_architecture,
3538                     unsigned long));
3539   boolean       (*_bfd_set_section_contents) PARAMS ((bfd *, sec_ptr, PTR,
3540                                             file_ptr, bfd_size_type));
3541
3542   /* Routines used by the linker.  */
3543 #define BFD_JUMP_TABLE_LINK(NAME)\
3544 CAT(NAME,_sizeof_headers),\
3545 CAT(NAME,_bfd_get_relocated_section_contents),\
3546 CAT(NAME,_bfd_relax_section),\
3547 CAT(NAME,_bfd_link_hash_table_create),\
3548 CAT(NAME,_bfd_link_add_symbols),\
3549 CAT(NAME,_bfd_final_link),\
3550 CAT(NAME,_bfd_link_split_section),\
3551 CAT(NAME,_bfd_gc_sections),\
3552 CAT(NAME,_bfd_merge_sections)
3553   int        (*_bfd_sizeof_headers) PARAMS ((bfd *, boolean));
3554   bfd_byte * (*_bfd_get_relocated_section_contents) PARAMS ((bfd *,
3555                     struct bfd_link_info *, struct bfd_link_order *,
3556                     bfd_byte *data, boolean relocateable,
3557                     struct symbol_cache_entry **));
3558
3559   boolean    (*_bfd_relax_section) PARAMS ((bfd *, struct sec *,
3560                     struct bfd_link_info *, boolean *again));
3561
3562   /* Create a hash table for the linker.  Different backends store
3563      different information in this table.  */
3564   struct bfd_link_hash_table *(*_bfd_link_hash_table_create) PARAMS ((bfd *));
3565
3566   /* Add symbols from this object file into the hash table.  */
3567   boolean (*_bfd_link_add_symbols) PARAMS ((bfd *, struct bfd_link_info *));
3568
3569   /* Do a link based on the link_order structures attached to each
3570      section of the BFD.  */
3571   boolean (*_bfd_final_link) PARAMS ((bfd *, struct bfd_link_info *));
3572
3573   /* Should this section be split up into smaller pieces during linking.  */
3574   boolean (*_bfd_link_split_section) PARAMS ((bfd *, struct sec *));
3575
3576   /* Remove sections that are not referenced from the output.  */
3577   boolean (*_bfd_gc_sections) PARAMS ((bfd *, struct bfd_link_info *));
3578
3579   /* Attempt to merge SEC_MERGE sections.  */
3580   boolean (*_bfd_merge_sections) PARAMS ((bfd *, struct bfd_link_info *));
3581
3582   /* Routines to handle dynamic symbols and relocs.  */
3583 #define BFD_JUMP_TABLE_DYNAMIC(NAME)\
3584 CAT(NAME,_get_dynamic_symtab_upper_bound),\
3585 CAT(NAME,_canonicalize_dynamic_symtab),\
3586 CAT(NAME,_get_dynamic_reloc_upper_bound),\
3587 CAT(NAME,_canonicalize_dynamic_reloc)
3588   /* Get the amount of memory required to hold the dynamic symbols. */
3589   long  (*_bfd_get_dynamic_symtab_upper_bound) PARAMS ((bfd *));
3590   /* Read in the dynamic symbols.  */
3591   long  (*_bfd_canonicalize_dynamic_symtab)
3592     PARAMS ((bfd *, struct symbol_cache_entry **));
3593   /* Get the amount of memory required to hold the dynamic relocs.  */
3594   long  (*_bfd_get_dynamic_reloc_upper_bound) PARAMS ((bfd *));
3595   /* Read in the dynamic relocs.  */
3596   long  (*_bfd_canonicalize_dynamic_reloc)
3597     PARAMS ((bfd *, arelent **, struct symbol_cache_entry **));
3598
3599  /* Opposite endian version of this target.  */
3600  const struct bfd_target * alternative_target;
3601
3602  PTR backend_data;
3603
3604 } bfd_target;
3605 boolean
3606 bfd_set_default_target PARAMS ((const char *name));
3607
3608 const bfd_target *
3609 bfd_find_target PARAMS ((CONST char *target_name, bfd *abfd));
3610
3611 const char **
3612 bfd_target_list PARAMS ((void));
3613
3614 const bfd_target *
3615 bfd_search_for_target PARAMS ((int (* search_func) (const bfd_target *, void *), void *));
3616
3617 boolean
3618 bfd_check_format PARAMS ((bfd *abfd, bfd_format format));
3619
3620 boolean
3621 bfd_check_format_matches PARAMS ((bfd *abfd, bfd_format format, char ***matching));
3622
3623 boolean
3624 bfd_set_format PARAMS ((bfd *abfd, bfd_format format));
3625
3626 CONST char *
3627 bfd_format_string PARAMS ((bfd_format format));
3628
3629 #ifdef __cplusplus
3630 }
3631 #endif
3632 #endif