bfd/reloc.c

   1 /* BFD support for handling relocation entries.
   2    Copyright 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
   3    2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
   4    Free Software Foundation, Inc.
   5    Written by Cygnus Support.
   6
   7    This file is part of BFD, the Binary File Descriptor library.
   8
   9    This program is free software; you can redistribute it and/or modify
  10    it under the terms of the GNU General Public License as published by
  11    the Free Software Foundation; either version 3 of the License, or
  12    (at your option) any later version.
  13
  14    This program is distributed in the hope that it will be useful,
  15    but WITHOUT ANY WARRANTY; without even the implied warranty of
  16    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17    GNU General Public License for more details.
  18
  19    You should have received a copy of the GNU General Public License
  20    along with this program; if not, write to the Free Software
  21    Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston,
  22    MA 02110-1301, USA.  */
  23
  24 /*
  25 SECTION
  26         Relocations
  27
  28         BFD maintains relocations in much the same way it maintains
  29         symbols: they are left alone until required, then read in
  30         en-masse and translated into an internal form.  A common
  31         routine <<bfd_perform_relocation>> acts upon the
  32         canonical form to do the fixup.
  33
  34         Relocations are maintained on a per section basis,
  35         while symbols are maintained on a per BFD basis.
  36
  37         All that a back end has to do to fit the BFD interface is to create
  38         a <<struct reloc_cache_entry>> for each relocation
  39         in a particular section, and fill in the right bits of the structures.
  40
  41 @menu
  42 @* typedef arelent::
  43 @* howto manager::
  44 @end menu
  45
  46 */
  47
  48 /* DO compile in the reloc_code name table from libbfd.h.  */
  49 #define _BFD_MAKE_TABLE_bfd_reloc_code_real
  50
  51 #include "sysdep.h"
  52 #include "bfd.h"
  53 #include "bfdlink.h"
  54 #include "libbfd.h"
  55 /*
  56 DOCDD
  57 INODE
  58         typedef arelent, howto manager, Relocations, Relocations
  59
  60 SUBSECTION
  61         typedef arelent
  62
  63         This is the structure of a relocation entry:
  64
  65 CODE_FRAGMENT
  66 .
  67 .typedef enum bfd_reloc_status
  68 .{
  69 .  {* No errors detected.  *}
  70 .  bfd_reloc_ok,
  71 .
  72 .  {* The relocation was performed, but there was an overflow.  *}
  73 .  bfd_reloc_overflow,
  74 .
  75 .  {* The address to relocate was not within the section supplied.  *}
  76 .  bfd_reloc_outofrange,
  77 .
  78 .  {* Used by special functions.  *}
  79 .  bfd_reloc_continue,
  80 .
  81 .  {* Unsupported relocation size requested.  *}
  82 .  bfd_reloc_notsupported,
  83 .
  84 .  {* Unused.  *}
  85 .  bfd_reloc_other,
  86 .
  87 .  {* The symbol to relocate against was undefined.  *}
  88 .  bfd_reloc_undefined,
  89 .
  90 .  {* The relocation was performed, but may not be ok - presently
  91 .     generated only when linking i960 coff files with i960 b.out
  92 .     symbols.  If this type is returned, the error_message argument
  93 .     to bfd_perform_relocation will be set.  *}
  94 .  bfd_reloc_dangerous
  95 . }
  96 . bfd_reloc_status_type;
  97 .
  98 .
  99 .typedef struct reloc_cache_entry
 100 .{
 101 .  {* A pointer into the canonical table of pointers.  *}
 102 .  struct bfd_symbol **sym_ptr_ptr;
 103 .
 104 .  {* offset in section.  *}
 105 .  bfd_size_type address;
 106 .
 107 .  {* addend for relocation value.  *}
 108 .  bfd_vma addend;
 109 .
 110 .  {* Pointer to how to perform the required relocation.  *}
 111 .  reloc_howto_type *howto;
 112 .
 113 .}
 114 .arelent;
 115 .
 116 */
 117
 118 /*
 119 DESCRIPTION
 120
 121         Here is a description of each of the fields within an <<arelent>>:
 122
 123         o <<sym_ptr_ptr>>
 124
 125         The symbol table pointer points to a pointer to the symbol
 126         associated with the relocation request.  It is the pointer
 127         into the table returned by the back end's
 128         <<canonicalize_symtab>> action. @xref{Symbols}. The symbol is
 129         referenced through a pointer to a pointer so that tools like
 130         the linker can fix up all the symbols of the same name by
 131         modifying only one pointer. The relocation routine looks in
 132         the symbol and uses the base of the section the symbol is
 133         attached to and the value of the symbol as the initial
 134         relocation offset. If the symbol pointer is zero, then the
 135         section provided is looked up.
 136
 137         o <<address>>
 138
 139         The <<address>> field gives the offset in bytes from the base of
 140         the section data which owns the relocation record to the first
 141         byte of relocatable information. The actual data relocated
 142         will be relative to this point; for example, a relocation
 143         type which modifies the bottom two bytes of a four byte word
 144         would not touch the first byte pointed to in a big endian
 145         world.
 146
 147         o <<addend>>
 148
 149         The <<addend>> is a value provided by the back end to be added (!)
 150         to the relocation offset. Its interpretation is dependent upon
 151         the howto. For example, on the 68k the code:
 152
 153 |        char foo[];
 154 |        main()
 155 |                {
 156 |                return foo[0x12345678];
 157 |                }
 158
 159         Could be compiled into:
 160
 161 |        linkw fp,#-4
 162 |        moveb @@#12345678,d0
 163 |        extbl d0
 164 |        unlk fp
 165 |        rts
 166
 167         This could create a reloc pointing to <<foo>>, but leave the
 168         offset in the data, something like:
 169
 170 |RELOCATION RECORDS FOR [.text]:
 171 |offset   type      value
 172 |00000006 32        _foo
 173 |
 174 |00000000 4e56 fffc          ; linkw fp,#-4
 175 |00000004 1039 1234 5678     ; moveb @@#12345678,d0
 176 |0000000a 49c0               ; extbl d0
 177 |0000000c 4e5e               ; unlk fp
 178 |0000000e 4e75               ; rts
 179
 180         Using coff and an 88k, some instructions don't have enough
 181         space in them to represent the full address range, and
 182         pointers have to be loaded in two parts. So you'd get something like:
 183
 184 |        or.u     r13,r0,hi16(_foo+0x12345678)
 185 |        ld.b     r2,r13,lo16(_foo+0x12345678)
 186 |        jmp      r1
 187
 188         This should create two relocs, both pointing to <<_foo>>, and with
 189         0x12340000 in their addend field. The data would consist of:
 190
 191 |RELOCATION RECORDS FOR [.text]:
 192 |offset   type      value
 193 |00000002 HVRT16    _foo+0x12340000
 194 |00000006 LVRT16    _foo+0x12340000
 195 |
 196 |00000000 5da05678           ; or.u r13,r0,0x5678
 197 |00000004 1c4d5678           ; ld.b r2,r13,0x5678
 198 |00000008 f400c001           ; jmp r1
 199
 200         The relocation routine digs out the value from the data, adds
 201         it to the addend to get the original offset, and then adds the
 202         value of <<_foo>>. Note that all 32 bits have to be kept around
 203         somewhere, to cope with carry from bit 15 to bit 16.
 204
 205         One further example is the sparc and the a.out format. The
 206         sparc has a similar problem to the 88k, in that some
 207         instructions don't have room for an entire offset, but on the
 208         sparc the parts are created in odd sized lumps. The designers of
 209         the a.out format chose to not use the data within the section
 210         for storing part of the offset; all the offset is kept within
 211         the reloc. Anything in the data should be ignored.
 212
 213 |        save %sp,-112,%sp
 214 |        sethi %hi(_foo+0x12345678),%g2
 215 |        ldsb [%g2+%lo(_foo+0x12345678)],%i0
 216 |        ret
 217 |        restore
 218
 219         Both relocs contain a pointer to <<foo>>, and the offsets
 220         contain junk.
 221
 222 |RELOCATION RECORDS FOR [.text]:
 223 |offset   type      value
 224 |00000004 HI22      _foo+0x12345678
 225 |00000008 LO10      _foo+0x12345678
 226 |
 227 |00000000 9de3bf90     ; save %sp,-112,%sp
 228 |00000004 05000000     ; sethi %hi(_foo+0),%g2
 229 |00000008 f048a000     ; ldsb [%g2+%lo(_foo+0)],%i0
 230 |0000000c 81c7e008     ; ret
 231 |00000010 81e80000     ; restore
 232
 233         o <<howto>>
 234
 235         The <<howto>> field can be imagined as a
 236         relocation instruction. It is a pointer to a structure which
 237         contains information on what to do with all of the other
 238         information in the reloc record and data section. A back end
 239         would normally have a relocation instruction set and turn
 240         relocations into pointers to the correct structure on input -
 241         but it would be possible to create each howto field on demand.
 242
 243 */
 244
 245 /*
 246 SUBSUBSECTION
 247         <<enum complain_overflow>>
 248
 249         Indicates what sort of overflow checking should be done when
 250         performing a relocation.
 251
 252 CODE_FRAGMENT
 253 .
 254 .enum complain_overflow
 255 .{
 256 .  {* Do not complain on overflow.  *}
 257 .  complain_overflow_dont,
 258 .
 259 .  {* Complain if the value overflows when considered as a signed
 260 .     number one bit larger than the field.  ie. A bitfield of N bits
 261 .     is allowed to represent -2**n to 2**n-1.  *}
 262 .  complain_overflow_bitfield,
 263 .
 264 .  {* Complain if the value overflows when considered as a signed
 265 .     number.  *}
 266 .  complain_overflow_signed,
 267 .
 268 .  {* Complain if the value overflows when considered as an
 269 .     unsigned number.  *}
 270 .  complain_overflow_unsigned
 271 .};
 272
 273 */
 274
 275 /*
 276 SUBSUBSECTION
 277         <<reloc_howto_type>>
 278
 279         The <<reloc_howto_type>> is a structure which contains all the
 280         information that libbfd needs to know to tie up a back end's data.
 281
 282 CODE_FRAGMENT
 283 .struct bfd_symbol;             {* Forward declaration.  *}
 284 .
 285 .struct reloc_howto_struct
 286 .{
 287 .  {*  The type field has mainly a documentary use - the back end can
 288 .      do what it wants with it, though normally the back end's
 289 .      external idea of what a reloc number is stored
 290 .      in this field.  For example, a PC relative word relocation
 291 .      in a coff environment has the type 023 - because that's
 292 .      what the outside world calls a R_PCRWORD reloc.  *}
 293 .  unsigned int type;
 294 .
 295 .  {*  The value the final relocation is shifted right by.  This drops
 296 .      unwanted data from the relocation.  *}
 297 .  unsigned int rightshift;
 298 .
 299 .  {*  The size of the item to be relocated.  This is *not* a
 300 .      power-of-two measure.  To get the number of bytes operated
 301 .      on by a type of relocation, use bfd_get_reloc_size.  *}
 302 .  int size;
 303 .
 304 .  {*  The number of bits in the item to be relocated.  This is used
 305 .      when doing overflow checking.  *}
 306 .  unsigned int bitsize;
 307 .
 308 .  {*  The relocation is relative to the field being relocated.  *}
 309 .  bfd_boolean pc_relative;
 310 .
 311 .  {*  The bit position of the reloc value in the destination.
 312 .      The relocated value is left shifted by this amount.  *}
 313 .  unsigned int bitpos;
 314 .
 315 .  {* What type of overflow error should be checked for when
 316 .     relocating.  *}
 317 .  enum complain_overflow complain_on_overflow;
 318 .
 319 .  {* If this field is non null, then the supplied function is
 320 .     called rather than the normal function.  This allows really
 321 .     strange relocation methods to be accommodated (e.g., i960 callj
 322 .     instructions).  *}
 323 .  bfd_reloc_status_type (*special_function)
 324 .    (bfd *, arelent *, struct bfd_symbol *, void *, asection *,
 325 .     bfd *, char **);
 326 .
 327 .  {* The textual name of the relocation type.  *}
 328 .  char *name;
 329 .
 330 .  {* Some formats record a relocation addend in the section contents
 331 .     rather than with the relocation.  For ELF formats this is the
 332 .     distinction between USE_REL and USE_RELA (though the code checks
 333 .     for USE_REL == 1/0).  The value of this field is TRUE if the
 334 .     addend is recorded with the section contents; when performing a
 335 .     partial link (ld -r) the section contents (the data) will be
 336 .     modified.  The value of this field is FALSE if addends are
 337 .     recorded with the relocation (in arelent.addend); when performing
 338 .     a partial link the relocation will be modified.
 339 .     All relocations for all ELF USE_RELA targets should set this field
 340 .     to FALSE (values of TRUE should be looked on with suspicion).
 341 .     However, the converse is not true: not all relocations of all ELF
 342 .     USE_REL targets set this field to TRUE.  Why this is so is peculiar
 343 .     to each particular target.  For relocs that aren't used in partial
 344 .     links (e.g. GOT stuff) it doesn't matter what this is set to.  *}
 345 .  bfd_boolean partial_inplace;
 346 .
 347 .  {* src_mask selects the part of the instruction (or data) to be used
 348 .     in the relocation sum.  If the target relocations don't have an
 349 .     addend in the reloc, eg. ELF USE_REL, src_mask will normally equal
 350 .     dst_mask to extract the addend from the section contents.  If
 351 .     relocations do have an addend in the reloc, eg. ELF USE_RELA, this
 352 .     field should be zero.  Non-zero values for ELF USE_RELA targets are
 353 .     bogus as in those cases the value in the dst_mask part of the
 354 .     section contents should be treated as garbage.  *}
 355 .  bfd_vma src_mask;
 356 .
 357 .  {* dst_mask selects which parts of the instruction (or data) are
 358 .     replaced with a relocated value.  *}
 359 .  bfd_vma dst_mask;
 360 .
 361 .  {* When some formats create PC relative instructions, they leave
 362 .     the value of the pc of the place being relocated in the offset
 363 .     slot of the instruction, so that a PC relative relocation can
 364 .     be made just by adding in an ordinary offset (e.g., sun3 a.out).
 365 .     Some formats leave the displacement part of an instruction
 366 .     empty (e.g., m88k bcs); this flag signals the fact.  *}
 367 .  bfd_boolean pcrel_offset;
 368 .};
 369 .
 370 */
 371
 372 /*
 373 FUNCTION
 374         The HOWTO Macro
 375
 376 DESCRIPTION
 377         The HOWTO define is horrible and will go away.
 378
 379 .#define HOWTO(C, R, S, B, P, BI, O, SF, NAME, INPLACE, MASKSRC, MASKDST, PC) \
 380 .  { (unsigned) C, R, S, B, P, BI, O, SF, NAME, INPLACE, MASKSRC, MASKDST, PC }
 381
 382 DESCRIPTION
 383         And will be replaced with the totally magic way. But for the
 384         moment, we are compatible, so do it this way.
 385
 386 .#define NEWHOWTO(FUNCTION, NAME, SIZE, REL, IN) \
 387 .  HOWTO (0, 0, SIZE, 0, REL, 0, complain_overflow_dont, FUNCTION, \
 388 .         NAME, FALSE, 0, 0, IN)
 389 .
 390
 391 DESCRIPTION
 392         This is used to fill in an empty howto entry in an array.
 393
 394 .#define EMPTY_HOWTO(C) \
 395 .  HOWTO ((C), 0, 0, 0, FALSE, 0, complain_overflow_dont, NULL, \
 396 .         NULL, FALSE, 0, 0, FALSE)
 397 .
 398
 399 DESCRIPTION
 400         Helper routine to turn a symbol into a relocation value.
 401
 402 .#define HOWTO_PREPARE(relocation, symbol)               \
 403 .  {                                                     \
 404 .    if (symbol != NULL)                                 \
 405 .      {                                                 \
 406 .        if (bfd_is_com_section (symbol->section))       \
 407 .          {                                             \
 408 .            relocation = 0;                             \
 409 .          }                                             \
 410 .        else                                            \
 411 .          {                                             \
 412 .            relocation = symbol->value;                 \
 413 .          }                                             \
 414 .      }                                                 \
 415 .  }
 416 .
 417 */
 418
 419 /*
 420 FUNCTION
 421         bfd_get_reloc_size
 422
 423 SYNOPSIS
 424         unsigned int bfd_get_reloc_size (reloc_howto_type *);
 425
 426 DESCRIPTION
 427         For a reloc_howto_type that operates on a fixed number of bytes,
 428         this returns the number of bytes operated on.
 429  */
 430
 431 unsigned int
 432 bfd_get_reloc_size (reloc_howto_type *howto)
 433 {
 434   switch (howto->size)
 435     {
 436     case 0: return 1;
 437     case 1: return 2;
 438     case 2: return 4;
 439     case 3: return 0;
 440     case 4: return 8;
 441     case 8: return 16;
 442     case -2: return 4;
 443     default: abort ();
 444     }
 445 }
 446
 447 /*
 448 TYPEDEF
 449         arelent_chain
 450
 451 DESCRIPTION
 452
 453         How relocs are tied together in an <<asection>>:
 454
 455 .typedef struct relent_chain
 456 .{
 457 .  arelent relent;
 458 .  struct relent_chain *next;
 459 .}
 460 .arelent_chain;
 461 .
 462 */
 463
 464 /* N_ONES produces N one bits, without overflowing machine arithmetic.  */
 465 #define N_ONES(n) (((((bfd_vma) 1 << ((n) - 1)) - 1) << 1) | 1)
 466
 467 /*
 468 FUNCTION
 469         bfd_check_overflow
 470
 471 SYNOPSIS
 472         bfd_reloc_status_type bfd_check_overflow
 473           (enum complain_overflow how,
 474            unsigned int bitsize,
 475            unsigned int rightshift,
 476            unsigned int addrsize,
 477            bfd_vma relocation);
 478
 479 DESCRIPTION
 480         Perform overflow checking on @var{relocation} which has
 481         @var{bitsize} significant bits and will be shifted right by
 482         @var{rightshift} bits, on a machine with addresses containing
 483         @var{addrsize} significant bits.  The result is either of
 484         @code{bfd_reloc_ok} or @code{bfd_reloc_overflow}.
 485
 486 */
 487
 488 bfd_reloc_status_type
 489 bfd_check_overflow (enum complain_overflow how,
 490                     unsigned int bitsize,
 491                     unsigned int rightshift,
 492                     unsigned int addrsize,
 493                     bfd_vma relocation)
 494 {
 495   bfd_vma fieldmask, addrmask, signmask, ss, a;
 496   bfd_reloc_status_type flag = bfd_reloc_ok;
 497
 498   /* Note: BITSIZE should always be <= ADDRSIZE, but in case it's not,
 499      we'll be permissive: extra bits in the field mask will
 500      automatically extend the address mask for purposes of the
 501      overflow check.  */
 502   fieldmask = N_ONES (bitsize);
 503   signmask = ~fieldmask;
 504   addrmask = N_ONES (addrsize) | (fieldmask << rightshift);
 505   a = (relocation & addrmask) >> rightshift;;
 506
 507   switch (how)
 508     {
 509     case complain_overflow_dont:
 510       break;
 511
 512     case complain_overflow_signed:
 513       /* If any sign bits are set, all sign bits must be set.  That
 514          is, A must be a valid negative address after shifting.  */
 515       signmask = ~ (fieldmask >> 1);
 516       /* Fall thru */
 517
 518     case complain_overflow_bitfield:
 519       /* Bitfields are sometimes signed, sometimes unsigned.  We
 520          explicitly allow an address wrap too, which means a bitfield
 521          of n bits is allowed to store -2**n to 2**n-1.  Thus overflow
 522          if the value has some, but not all, bits set outside the
 523          field.  */
 524       ss = a & signmask;
 525       if (ss != 0 && ss != ((addrmask >> rightshift) & signmask))
 526         flag = bfd_reloc_overflow;
 527       break;
 528
 529     case complain_overflow_unsigned:
 530       /* We have an overflow if the address does not fit in the field.  */
 531       if ((a & signmask) != 0)
 532         flag = bfd_reloc_overflow;
 533       break;
 534
 535     default:
 536       abort ();
 537     }
 538
 539   return flag;
 540 }
 541
 542 /*
 543 FUNCTION
 544         bfd_perform_relocation
 545
 546 SYNOPSIS
 547         bfd_reloc_status_type bfd_perform_relocation
 548           (bfd *abfd,
 549            arelent *reloc_entry,
 550            void *data,
 551            asection *input_section,
 552            bfd *output_bfd,
 553            char **error_message);
 554
 555 DESCRIPTION
 556         If @var{output_bfd} is supplied to this function, the
 557         generated image will be relocatable; the relocations are
 558         copied to the output file after they have been changed to
 559         reflect the new state of the world. There are two ways of
 560         reflecting the results of partial linkage in an output file:
 561         by modifying the output data in place, and by modifying the
 562         relocation record.  Some native formats (e.g., basic a.out and
 563         basic coff) have no way of specifying an addend in the
 564         relocation type, so the addend has to go in the output data.
 565         This is no big deal since in these formats the output data
 566         slot will always be big enough for the addend. Complex reloc
 567         types with addends were invented to solve just this problem.
 568         The @var{error_message} argument is set to an error message if
 569         this return @code{bfd_reloc_dangerous}.
 570
 571 */
 572
 573 bfd_reloc_status_type
 574 bfd_perform_relocation (bfd *abfd,
 575                         arelent *reloc_entry,
 576                         void *data,
 577                         asection *input_section,
 578                         bfd *output_bfd,
 579                         char **error_message)
 580 {
 581   bfd_vma relocation;
 582   bfd_reloc_status_type flag = bfd_reloc_ok;
 583   bfd_size_type octets = reloc_entry->address * bfd_octets_per_byte (abfd);
 584   bfd_vma output_base = 0;
 585   reloc_howto_type *howto = reloc_entry->howto;
 586   asection *reloc_target_output_section;
 587   asymbol *symbol;
 588
 589   symbol = *(reloc_entry->sym_ptr_ptr);
 590   if (bfd_is_abs_section (symbol->section)
 591       && output_bfd != NULL)
 592     {
 593       reloc_entry->address += input_section->output_offset;
 594       return bfd_reloc_ok;
 595     }
 596
 597   /* If we are not producing relocatable output, return an error if
 598      the symbol is not defined.  An undefined weak symbol is
 599      considered to have a value of zero (SVR4 ABI, p. 4-27).  */
 600   if (bfd_is_und_section (symbol->section)
 601       && (symbol->flags & BSF_WEAK) == 0
 602       && output_bfd == NULL)
 603     flag = bfd_reloc_undefined;
 604
 605   /* If there is a function supplied to handle this relocation type,
 606      call it.  It'll return `bfd_reloc_continue' if further processing
 607      can be done.  */
 608   if (howto->special_function)
 609     {
 610       bfd_reloc_status_type cont;
 611       cont = howto->special_function (abfd, reloc_entry, symbol, data,
 612                                       input_section, output_bfd,
 613                                       error_message);
 614       if (cont != bfd_reloc_continue)
 615         return cont;
 616     }
 617
 618   /* Is the address of the relocation really within the section?  */
 619   if (reloc_entry->address > bfd_get_section_limit (abfd, input_section))
 620     return bfd_reloc_outofrange;
 621
 622   /* Work out which section the relocation is targeted at and the
 623      initial relocation command value.  */
 624
 625   /* Get symbol value.  (Common symbols are special.)  */
 626   if (bfd_is_com_section (symbol->section))
 627     relocation = 0;
 628   else
 629     relocation = symbol->value;
 630
 631   reloc_target_output_section = symbol->section->output_section;
 632
 633   /* Convert input-section-relative symbol value to absolute.  */
 634   if ((output_bfd && ! howto->partial_inplace)
 635       || reloc_target_output_section == NULL)
 636     output_base = 0;
 637   else
 638     output_base = reloc_target_output_section->vma;
 639
 640   relocation += output_base + symbol->section->output_offset;
 641
 642   /* Add in supplied addend.  */
 643   relocation += reloc_entry->addend;
 644
 645   /* Here the variable relocation holds the final address of the
 646      symbol we are relocating against, plus any addend.  */
 647
 648   if (howto->pc_relative)
 649     {
 650       /* This is a PC relative relocation.  We want to set RELOCATION
 651          to the distance between the address of the symbol and the
 652          location.  RELOCATION is already the address of the symbol.
 653
 654          We start by subtracting the address of the section containing
 655          the location.
 656
 657          If pcrel_offset is set, we must further subtract the position
 658          of the location within the section.  Some targets arrange for
 659          the addend to be the negative of the position of the location
 660          within the section; for example, i386-aout does this.  For
 661          i386-aout, pcrel_offset is FALSE.  Some other targets do not
 662          include the position of the location; for example, m88kbcs,
 663          or ELF.  For those targets, pcrel_offset is TRUE.
 664
 665          If we are producing relocatable output, then we must ensure
 666          that this reloc will be correctly computed when the final
 667          relocation is done.  If pcrel_offset is FALSE we want to wind
 668          up with the negative of the location within the section,
 669          which means we must adjust the existing addend by the change
 670          in the location within the section.  If pcrel_offset is TRUE
 671          we do not want to adjust the existing addend at all.
 672
 673          FIXME: This seems logical to me, but for the case of
 674          producing relocatable output it is not what the code
 675          actually does.  I don't want to change it, because it seems
 676          far too likely that something will break.  */
 677
 678       relocation -=
 679         input_section->output_section->vma + input_section->output_offset;
 680
 681       if (howto->pcrel_offset)
 682         relocation -= reloc_entry->address;
 683     }
 684
 685   if (output_bfd != NULL)
 686     {
 687       if (! howto->partial_inplace)
 688         {
 689           /* This is a partial relocation, and we want to apply the relocation
 690              to the reloc entry rather than the raw data. Modify the reloc
 691              inplace to reflect what we now know.  */
 692           reloc_entry->addend = relocation;
 693           reloc_entry->address += input_section->output_offset;
 694           return flag;
 695         }
 696       else
 697         {
 698           /* This is a partial relocation, but inplace, so modify the
 699              reloc record a bit.
 700
 701              If we've relocated with a symbol with a section, change
 702              into a ref to the section belonging to the symbol.  */
 703
 704           reloc_entry->address += input_section->output_offset;
 705
 706           /* WTF?? */
 707           if (abfd->xvec->flavour == bfd_target_coff_flavour
 708               && strcmp (abfd->xvec->name, "coff-Intel-little") != 0
 709               && strcmp (abfd->xvec->name, "coff-Intel-big") != 0)
 710             {
 711               /* For m68k-coff, the addend was being subtracted twice during
 712                  relocation with -r.  Removing the line below this comment
 713                  fixes that problem; see PR 2953.
 714
 715 However, Ian wrote the following, regarding removing the line below,
 716 which explains why it is still enabled:  --djm
 717
 718 If you put a patch like that into BFD you need to check all the COFF
 719 linkers.  I am fairly certain that patch will break coff-i386 (e.g.,
 720 SCO); see coff_i386_reloc in coff-i386.c where I worked around the
 721 problem in a different way.  There may very well be a reason that the
 722 code works as it does.
 723
 724 Hmmm.  The first obvious point is that bfd_perform_relocation should
 725 not have any tests that depend upon the flavour.  It's seem like
 726 entirely the wrong place for such a thing.  The second obvious point
 727 is that the current code ignores the reloc addend when producing
 728 relocatable output for COFF.  That's peculiar.  In fact, I really
 729 have no idea what the point of the line you want to remove is.
 730
 731 A typical COFF reloc subtracts the old value of the symbol and adds in
 732 the new value to the location in the object file (if it's a pc
 733 relative reloc it adds the difference between the symbol value and the
 734 location).  When relocating we need to preserve that property.
 735
 736 BFD handles this by setting the addend to the negative of the old
 737 value of the symbol.  Unfortunately it handles common symbols in a
 738 non-standard way (it doesn't subtract the old value) but that's a
 739 different story (we can't change it without losing backward
 740 compatibility with old object files) (coff-i386 does subtract the old
 741 value, to be compatible with existing coff-i386 targets, like SCO).
 742
 743 So everything works fine when not producing relocatable output.  When
 744 we are producing relocatable output, logically we should do exactly
 745 what we do when not producing relocatable output.  Therefore, your
 746 patch is correct.  In fact, it should probably always just set
 747 reloc_entry->addend to 0 for all cases, since it is, in fact, going to
 748 add the value into the object file.  This won't hurt the COFF code,
 749 which doesn't use the addend; I'm not sure what it will do to other
 750 formats (the thing to check for would be whether any formats both use
 751 the addend and set partial_inplace).
 752
 753 When I wanted to make coff-i386 produce relocatable output, I ran
 754 into the problem that you are running into: I wanted to remove that
 755 line.  Rather than risk it, I made the coff-i386 relocs use a special
 756 function; it's coff_i386_reloc in coff-i386.c.  The function
 757 specifically adds the addend field into the object file, knowing that
 758 bfd_perform_relocation is not going to.  If you remove that line, then
 759 coff-i386.c will wind up adding the addend field in twice.  It's
 760 trivial to fix; it just needs to be done.
 761
 762 The problem with removing the line is just that it may break some
 763 working code.  With BFD it's hard to be sure of anything.  The right
 764 way to deal with this is simply to build and test at least all the
 765 supported COFF targets.  It should be straightforward if time and disk
 766 space consuming.  For each target:
 767     1) build the linker
 768     2) generate some executable, and link it using -r (I would
 769        probably use paranoia.o and link against newlib/libc.a, which
 770        for all the supported targets would be available in
 771        /usr/cygnus/progressive/H-host/target/lib/libc.a).
 772     3) make the change to reloc.c
 773     4) rebuild the linker
 774     5) repeat step 2
 775     6) if the resulting object files are the same, you have at least
 776        made it no worse
 777     7) if they are different you have to figure out which version is
 778        right
 779 */
 780               relocation -= reloc_entry->addend;
 781               reloc_entry->addend = 0;
 782             }
 783           else
 784             {
 785               reloc_entry->addend = relocation;
 786             }
 787         }
 788     }
 789   else
 790     {
 791       reloc_entry->addend = 0;
 792     }
 793
 794   /* FIXME: This overflow checking is incomplete, because the value
 795      might have overflowed before we get here.  For a correct check we
 796      need to compute the value in a size larger than bitsize, but we
 797      can't reasonably do that for a reloc the same size as a host
 798      machine word.
 799      FIXME: We should also do overflow checking on the result after
 800      adding in the value contained in the object file.  */
 801   if (howto->complain_on_overflow != complain_overflow_dont
 802       && flag == bfd_reloc_ok)
 803     flag = bfd_check_overflow (howto->complain_on_overflow,
 804                                howto->bitsize,
 805                                howto->rightshift,
 806                                bfd_arch_bits_per_address (abfd),
 807                                relocation);
 808
 809   /* Either we are relocating all the way, or we don't want to apply
 810      the relocation to the reloc entry (probably because there isn't
 811      any room in the output format to describe addends to relocs).  */
 812
 813   /* The cast to bfd_vma avoids a bug in the Alpha OSF/1 C compiler
 814      (OSF version 1.3, compiler version 3.11).  It miscompiles the
 815      following program:
 816
 817      struct str
 818      {
 819        unsigned int i0;
 820      } s = { 0 };
 821
 822      int
 823      main ()
 824      {
 825        unsigned long x;
 826
 827        x = 0x100000000;
 828        x <<= (unsigned long) s.i0;
 829        if (x == 0)
 830          printf ("failed\n");
 831        else
 832          printf ("succeeded (%lx)\n", x);
 833      }
 834      */
 835
 836   relocation >>= (bfd_vma) howto->rightshift;
 837
 838   /* Shift everything up to where it's going to be used.  */
 839   relocation <<= (bfd_vma) howto->bitpos;
 840
 841   /* Wait for the day when all have the mask in them.  */
 842
 843   /* What we do:
 844      i instruction to be left alone
 845      o offset within instruction
 846      r relocation offset to apply
 847      S src mask
 848      D dst mask
 849      N ~dst mask
 850      A part 1
 851      B part 2
 852      R result
 853
 854      Do this:
 855      ((  i i i i i o o o o o  from bfd_get<size>
 856      and           S S S S S) to get the size offset we want
 857      +   r r r r r r r r r r) to get the final value to place
 858      and           D D D D D  to chop to right size
 859      -----------------------
 860      =             A A A A A
 861      And this:
 862      (   i i i i i o o o o o  from bfd_get<size>
 863      and N N N N N          ) get instruction
 864      -----------------------
 865      =   B B B B B
 866
 867      And then:
 868      (   B B B B B
 869      or            A A A A A)
 870      -----------------------
 871      =   R R R R R R R R R R  put into bfd_put<size>
 872      */
 873
 874 #define DOIT(x) \
 875   x = ( (x & ~howto->dst_mask) | (((x & howto->src_mask) +  relocation) & howto->dst_mask))
 876
 877   switch (howto->size)
 878     {
 879     case 0:
 880       {
 881         char x = bfd_get_8 (abfd, (char *) data + octets);
 882         DOIT (x);
 883         bfd_put_8 (abfd, x, (unsigned char *) data + octets);
 884       }
 885       break;
 886
 887     case 1:
 888       {
 889         short x = bfd_get_16 (abfd, (bfd_byte *) data + octets);
 890         DOIT (x);
 891         bfd_put_16 (abfd, (bfd_vma) x, (unsigned char *) data + octets);
 892       }
 893       break;
 894     case 2:
 895       {
 896         long x = bfd_get_32 (abfd, (bfd_byte *) data + octets);
 897         DOIT (x);
 898         bfd_put_32 (abfd, (bfd_vma) x, (bfd_byte *) data + octets);
 899       }
 900       break;
 901     case -2:
 902       {
 903         long x = bfd_get_32 (abfd, (bfd_byte *) data + octets);
 904         relocation = -relocation;
 905         DOIT (x);
 906         bfd_put_32 (abfd, (bfd_vma) x, (bfd_byte *) data + octets);
 907       }
 908       break;
 909
 910     case -1:
 911       {
 912         long x = bfd_get_16 (abfd, (bfd_byte *) data + octets);
 913         relocation = -relocation;
 914         DOIT (x);
 915         bfd_put_16 (abfd, (bfd_vma) x, (bfd_byte *) data + octets);
 916       }
 917       break;
 918
 919     case 3:
 920       /* Do nothing */
 921       break;
 922
 923     case 4:
 924 #ifdef BFD64
 925       {
 926         bfd_vma x = bfd_get_64 (abfd, (bfd_byte *) data + octets);
 927         DOIT (x);
 928         bfd_put_64 (abfd, x, (bfd_byte *) data + octets);
 929       }
 930 #else
 931       abort ();
 932 #endif
 933       break;
 934     default:
 935       return bfd_reloc_other;
 936     }
 937
 938   return flag;
 939 }
 940
 941 /*
 942 FUNCTION
 943         bfd_install_relocation
 944
 945 SYNOPSIS
 946         bfd_reloc_status_type bfd_install_relocation
 947           (bfd *abfd,
 948            arelent *reloc_entry,
 949            void *data, bfd_vma data_start,
 950            asection *input_section,
 951            char **error_message);
 952
 953 DESCRIPTION
 954         This looks remarkably like <<bfd_perform_relocation>>, except it
 955         does not expect that the section contents have been filled in.
 956         I.e., it's suitable for use when creating, rather than applying
 957         a relocation.
 958
 959         For now, this function should be considered reserved for the
 960         assembler.
 961 */
 962
 963 bfd_reloc_status_type
 964 bfd_install_relocation (bfd *abfd,
 965                         arelent *reloc_entry,
 966                         void *data_start,
 967                         bfd_vma data_start_offset,
 968                         asection *input_section,
 969                         char **error_message)
 970 {
 971   bfd_vma relocation;
 972   bfd_reloc_status_type flag = bfd_reloc_ok;
 973   bfd_size_type octets = reloc_entry->address * bfd_octets_per_byte (abfd);
 974   bfd_vma output_base = 0;
 975   reloc_howto_type *howto = reloc_entry->howto;
 976   asection *reloc_target_output_section;
 977   asymbol *symbol;
 978   bfd_byte *data;
 979
 980   symbol = *(reloc_entry->sym_ptr_ptr);
 981   if (bfd_is_abs_section (symbol->section))
 982     {
 983       reloc_entry->address += input_section->output_offset;
 984       return bfd_reloc_ok;
 985     }
 986
 987   /* If there is a function supplied to handle this relocation type,
 988      call it.  It'll return `bfd_reloc_continue' if further processing
 989      can be done.  */
 990   if (howto->special_function)
 991     {
 992       bfd_reloc_status_type cont;
 993
 994       /* XXX - The special_function calls haven't been fixed up to deal
 995          with creating new relocations and section contents.  */
 996       cont = howto->special_function (abfd, reloc_entry, symbol,
 997                                       /* XXX - Non-portable! */
 998                                       ((bfd_byte *) data_start
 999                                        - data_start_offset),
1000                                       input_section, abfd, error_message);
1001       if (cont != bfd_reloc_continue)
1002         return cont;
1003     }
1004
1005   /* Is the address of the relocation really within the section?  */
1006   if (reloc_entry->address > bfd_get_section_limit (abfd, input_section))
1007     return bfd_reloc_outofrange;
1008
1009   /* Work out which section the relocation is targeted at and the
1010      initial relocation command value.  */
1011
1012   /* Get symbol value.  (Common symbols are special.)  */
1013   if (bfd_is_com_section (symbol->section))
1014     relocation = 0;
1015   else
1016     relocation = symbol->value;
1017
1018   reloc_target_output_section = symbol->section->output_section;
1019
1020   /* Convert input-section-relative symbol value to absolute.  */
1021   if (! howto->partial_inplace)
1022     output_base = 0;
1023   else
1024     output_base = reloc_target_output_section->vma;
1025
1026   relocation += output_base + symbol->section->output_offset;
1027
1028   /* Add in supplied addend.  */
1029   relocation += reloc_entry->addend;
1030
1031   /* Here the variable relocation holds the final address of the
1032      symbol we are relocating against, plus any addend.  */
1033
1034   if (howto->pc_relative)
1035     {
1036       /* This is a PC relative relocation.  We want to set RELOCATION
1037          to the distance between the address of the symbol and the
1038          location.  RELOCATION is already the address of the symbol.
1039
1040          We start by subtracting the address of the section containing
1041          the location.
1042
1043          If pcrel_offset is set, we must further subtract the position
1044          of the location within the section.  Some targets arrange for
1045          the addend to be the negative of the position of the location
1046          within the section; for example, i386-aout does this.  For
1047          i386-aout, pcrel_offset is FALSE.  Some other targets do not
1048          include the position of the location; for example, m88kbcs,
1049          or ELF.  For those targets, pcrel_offset is TRUE.
1050
1051          If we are producing relocatable output, then we must ensure
1052          that this reloc will be correctly computed when the final
1053          relocation is done.  If pcrel_offset is FALSE we want to wind
1054          up with the negative of the location within the section,
1055          which means we must adjust the existing addend by the change
1056          in the location within the section.  If pcrel_offset is TRUE
1057          we do not want to adjust the existing addend at all.
1058
1059          FIXME: This seems logical to me, but for the case of
1060          producing relocatable output it is not what the code
1061          actually does.  I don't want to change it, because it seems
1062          far too likely that something will break.  */
1063
1064       relocation -=
1065         input_section->output_section->vma + input_section->output_offset;
1066
1067       if (howto->pcrel_offset && howto->partial_inplace)
1068         relocation -= reloc_entry->address;
1069     }
1070
1071   if (! howto->partial_inplace)
1072     {
1073       /* This is a partial relocation, and we want to apply the relocation
1074          to the reloc entry rather than the raw data. Modify the reloc
1075          inplace to reflect what we now know.  */
1076       reloc_entry->addend = relocation;
1077       reloc_entry->address += input_section->output_offset;
1078       return flag;
1079     }
1080   else
1081     {
1082       /* This is a partial relocation, but inplace, so modify the
1083          reloc record a bit.
1084
1085          If we've relocated with a symbol with a section, change
1086          into a ref to the section belonging to the symbol.  */
1087       reloc_entry->address += input_section->output_offset;
1088
1089       /* WTF?? */
1090       if (abfd->xvec->flavour == bfd_target_coff_flavour
1091           && strcmp (abfd->xvec->name, "coff-Intel-little") != 0
1092           && strcmp (abfd->xvec->name, "coff-Intel-big") != 0)
1093         {
1094
1095           /* For m68k-coff, the addend was being subtracted twice during
1096              relocation with -r.  Removing the line below this comment
1097              fixes that problem; see PR 2953.
1098
1099 However, Ian wrote the following, regarding removing the line below,
1100 which explains why it is still enabled:  --djm
1101
1102 If you put a patch like that into BFD you need to check all the COFF
1103 linkers.  I am fairly certain that patch will break coff-i386 (e.g.,
1104 SCO); see coff_i386_reloc in coff-i386.c where I worked around the
1105 problem in a different way.  There may very well be a reason that the
1106 code works as it does.
1107
1108 Hmmm.  The first obvious point is that bfd_install_relocation should
1109 not have any tests that depend upon the flavour.  It's seem like
1110 entirely the wrong place for such a thing.  The second obvious point
1111 is that the current code ignores the reloc addend when producing
1112 relocatable output for COFF.  That's peculiar.  In fact, I really
1113 have no idea what the point of the line you want to remove is.
1114
1115 A typical COFF reloc subtracts the old value of the symbol and adds in
1116 the new value to the location in the object file (if it's a pc
1117 relative reloc it adds the difference between the symbol value and the
1118 location).  When relocating we need to preserve that property.
1119
1120 BFD handles this by setting the addend to the negative of the old
1121 value of the symbol.  Unfortunately it handles common symbols in a
1122 non-standard way (it doesn't subtract the old value) but that's a
1123 different story (we can't change it without losing backward
1124 compatibility with old object files) (coff-i386 does subtract the old
1125 value, to be compatible with existing coff-i386 targets, like SCO).
1126
1127 So everything works fine when not producing relocatable output.  When
1128 we are producing relocatable output, logically we should do exactly
1129 what we do when not producing relocatable output.  Therefore, your
1130 patch is correct.  In fact, it should probably always just set
1131 reloc_entry->addend to 0 for all cases, since it is, in fact, going to
1132 add the value into the object file.  This won't hurt the COFF code,
1133 which doesn't use the addend; I'm not sure what it will do to other
1134 formats (the thing to check for would be whether any formats both use
1135 the addend and set partial_inplace).
1136
1137 When I wanted to make coff-i386 produce relocatable output, I ran
1138 into the problem that you are running into: I wanted to remove that
1139 line.  Rather than risk it, I made the coff-i386 relocs use a special
1140 function; it's coff_i386_reloc in coff-i386.c.  The function
1141 specifically adds the addend field into the object file, knowing that
1142 bfd_install_relocation is not going to.  If you remove that line, then
1143 coff-i386.c will wind up adding the addend field in twice.  It's
1144 trivial to fix; it just needs to be done.
1145
1146 The problem with removing the line is just that it may break some
1147 working code.  With BFD it's hard to be sure of anything.  The right
1148 way to deal with this is simply to build and test at least all the
1149 supported COFF targets.  It should be straightforward if time and disk
1150 space consuming.  For each target:
1151     1) build the linker
1152     2) generate some executable, and link it using -r (I would
1153        probably use paranoia.o and link against newlib/libc.a, which
1154        for all the supported targets would be available in
1155        /usr/cygnus/progressive/H-host/target/lib/libc.a).
1156     3) make the change to reloc.c
1157     4) rebuild the linker
1158     5) repeat step 2
1159     6) if the resulting object files are the same, you have at least
1160        made it no worse
1161     7) if they are different you have to figure out which version is
1162        right.  */
1163           relocation -= reloc_entry->addend;
1164           /* FIXME: There should be no target specific code here...  */
1165           if (strcmp (abfd->xvec->name, "coff-z8k") != 0)
1166             reloc_entry->addend = 0;
1167         }
1168       else
1169         {
1170           reloc_entry->addend = relocation;
1171         }
1172     }
1173
1174   /* FIXME: This overflow checking is incomplete, because the value
1175      might have overflowed before we get here.  For a correct check we
1176      need to compute the value in a size larger than bitsize, but we
1177      can't reasonably do that for a reloc the same size as a host
1178      machine word.
1179      FIXME: We should also do overflow checking on the result after
1180      adding in the value contained in the object file.  */
1181   if (howto->complain_on_overflow != complain_overflow_dont)
1182     flag = bfd_check_overflow (howto->complain_on_overflow,
1183                                howto->bitsize,
1184                                howto->rightshift,
1185                                bfd_arch_bits_per_address (abfd),
1186                                relocation);
1187
1188   /* Either we are relocating all the way, or we don't want to apply
1189      the relocation to the reloc entry (probably because there isn't
1190      any room in the output format to describe addends to relocs).  */
1191
1192   /* The cast to bfd_vma avoids a bug in the Alpha OSF/1 C compiler
1193      (OSF version 1.3, compiler version 3.11).  It miscompiles the
1194      following program:
1195
1196      struct str
1197      {
1198        unsigned int i0;
1199      } s = { 0 };
1200
1201      int
1202      main ()
1203      {
1204        unsigned long x;
1205
1206        x = 0x100000000;
1207        x <<= (unsigned long) s.i0;
1208        if (x == 0)
1209          printf ("failed\n");
1210        else
1211          printf ("succeeded (%lx)\n", x);
1212      }
1213      */
1214
1215   relocation >>= (bfd_vma) howto->rightshift;
1216
1217   /* Shift everything up to where it's going to be used.  */
1218   relocation <<= (bfd_vma) howto->bitpos;
1219
1220   /* Wait for the day when all have the mask in them.  */
1221
1222   /* What we do:
1223      i instruction to be left alone
1224      o offset within instruction
1225      r relocation offset to apply
1226      S src mask
1227      D dst mask
1228      N ~dst mask
1229      A part 1
1230      B part 2
1231      R result
1232
1233      Do this:
1234      ((  i i i i i o o o o o  from bfd_get<size>
1235      and           S S S S S) to get the size offset we want
1236      +   r r r r r r r r r r) to get the final value to place
1237      and           D D D D D  to chop to right size
1238      -----------------------
1239      =             A A A A A
1240      And this:
1241      (   i i i i i o o o o o  from bfd_get<size>
1242      and N N N N N          ) get instruction
1243      -----------------------
1244      =   B B B B B
1245
1246      And then:
1247      (   B B B B B
1248      or            A A A A A)
1249      -----------------------
1250      =   R R R R R R R R R R  put into bfd_put<size>
1251      */
1252
1253 #define DOIT(x) \
1254   x = ( (x & ~howto->dst_mask) | (((x & howto->src_mask) +  relocation) & howto->dst_mask))
1255
1256   data = (bfd_byte *) data_start + (octets - data_start_offset);
1257
1258   switch (howto->size)
1259     {
1260     case 0:
1261       {
1262         char x = bfd_get_8 (abfd, data);
1263         DOIT (x);
1264         bfd_put_8 (abfd, x, data);
1265       }
1266       break;
1267
1268     case 1:
1269       {
1270         short x = bfd_get_16 (abfd, data);
1271         DOIT (x);
1272         bfd_put_16 (abfd, (bfd_vma) x, data);
1273       }
1274       break;
1275     case 2:
1276       {
1277         long x = bfd_get_32 (abfd, data);
1278         DOIT (x);
1279         bfd_put_32 (abfd, (bfd_vma) x, data);
1280       }
1281       break;
1282     case -2:
1283       {
1284         long x = bfd_get_32 (abfd, data);
1285         relocation = -relocation;
1286         DOIT (x);
1287         bfd_put_32 (abfd, (bfd_vma) x, data);
1288       }
1289       break;
1290
1291     case 3:
1292       /* Do nothing */
1293       break;
1294
1295     case 4:
1296       {
1297         bfd_vma x = bfd_get_64 (abfd, data);
1298         DOIT (x);
1299         bfd_put_64 (abfd, x, data);
1300       }
1301       break;
1302     default:
1303       return bfd_reloc_other;
1304     }
1305
1306   return flag;
1307 }
1308
1309 /* This relocation routine is used by some of the backend linkers.
1310    They do not construct asymbol or arelent structures, so there is no
1311    reason for them to use bfd_perform_relocation.  Also,
1312    bfd_perform_relocation is so hacked up it is easier to write a new
1313    function than to try to deal with it.
1314
1315    This routine does a final relocation.  Whether it is useful for a
1316    relocatable link depends upon how the object format defines
1317    relocations.
1318
1319    FIXME: This routine ignores any special_function in the HOWTO,
1320    since the existing special_function values have been written for
1321    bfd_perform_relocation.
1322
1323    HOWTO is the reloc howto information.
1324    INPUT_BFD is the BFD which the reloc applies to.
1325    INPUT_SECTION is the section which the reloc applies to.
1326    CONTENTS is the contents of the section.
1327    ADDRESS is the address of the reloc within INPUT_SECTION.
1328    VALUE is the value of the symbol the reloc refers to.
1329    ADDEND is the addend of the reloc.  */
1330
1331 bfd_reloc_status_type
1332 _bfd_final_link_relocate (reloc_howto_type *howto,
1333                           bfd *input_bfd,
1334                           asection *input_section,
1335                           bfd_byte *contents,
1336                           bfd_vma address,
1337                           bfd_vma value,
1338                           bfd_vma addend)
1339 {
1340   bfd_vma relocation;
1341
1342   /* Sanity check the address.  */
1343   if (address > bfd_get_section_limit (input_bfd, input_section))
1344     return bfd_reloc_outofrange;
1345
1346   /* This function assumes that we are dealing with a basic relocation
1347      against a symbol.  We want to compute the value of the symbol to
1348      relocate to.  This is just VALUE, the value of the symbol, plus
1349      ADDEND, any addend associated with the reloc.  */
1350   relocation = value + addend;
1351
1352   /* If the relocation is PC relative, we want to set RELOCATION to
1353      the distance between the symbol (currently in RELOCATION) and the
1354      location we are relocating.  Some targets (e.g., i386-aout)
1355      arrange for the contents of the section to be the negative of the
1356      offset of the location within the section; for such targets
1357      pcrel_offset is FALSE.  Other targets (e.g., m88kbcs or ELF)
1358      simply leave the contents of the section as zero; for such
1359      targets pcrel_offset is TRUE.  If pcrel_offset is FALSE we do not
1360      need to subtract out the offset of the location within the
1361      section (which is just ADDRESS).  */
1362   if (howto->pc_relative)
1363     {
1364       relocation -= (input_section->output_section->vma
1365                      + input_section->output_offset);
1366       if (howto->pcrel_offset)
1367         relocation -= address;
1368     }
1369
1370   return _bfd_relocate_contents (howto, input_bfd, relocation,
1371                                  contents + address);
1372 }
1373
1374 /* Relocate a given location using a given value and howto.  */
1375
1376 bfd_reloc_status_type
1377 _bfd_relocate_contents (reloc_howto_type *howto,
1378                         bfd *input_bfd,
1379                         bfd_vma relocation,
1380                         bfd_byte *location)
1381 {
1382   int size;
1383   bfd_vma x = 0;
1384   bfd_reloc_status_type flag;
1385   unsigned int rightshift = howto->rightshift;
1386   unsigned int bitpos = howto->bitpos;
1387
1388   /* If the size is negative, negate RELOCATION.  This isn't very
1389      general.  */
1390   if (howto->size < 0)
1391     relocation = -relocation;
1392
1393   /* Get the value we are going to relocate.  */
1394   size = bfd_get_reloc_size (howto);
1395   switch (size)
1396     {
1397     default:
1398     case 0:
1399       abort ();
1400     case 1:
1401       x = bfd_get_8 (input_bfd, location);
1402       break;
1403     case 2:
1404       x = bfd_get_16 (input_bfd, location);
1405       break;
1406     case 4:
1407       x = bfd_get_32 (input_bfd, location);
1408       break;
1409     case 8:
1410 #ifdef BFD64
1411       x = bfd_get_64 (input_bfd, location);
1412 #else
1413       abort ();
1414 #endif
1415       break;
1416     }
1417
1418   /* Check for overflow.  FIXME: We may drop bits during the addition
1419      which we don't check for.  We must either check at every single
1420      operation, which would be tedious, or we must do the computations
1421      in a type larger than bfd_vma, which would be inefficient.  */
1422   flag = bfd_reloc_ok;
1423   if (howto->complain_on_overflow != complain_overflow_dont)
1424     {
1425       bfd_vma addrmask, fieldmask, signmask, ss;
1426       bfd_vma a, b, sum;
1427
1428       /* Get the values to be added together.  For signed and unsigned
1429          relocations, we assume that all values should be truncated to
1430          the size of an address.  For bitfields, all the bits matter.
1431          See also bfd_check_overflow.  */
1432       fieldmask = N_ONES (howto->bitsize);
1433       signmask = ~fieldmask;
1434       addrmask = (N_ONES (bfd_arch_bits_per_address (input_bfd))
1435                   | (fieldmask << rightshift));
1436       a = (relocation & addrmask) >> rightshift;
1437       b = (x & howto->src_mask & addrmask) >> bitpos;
1438       addrmask >>= rightshift;
1439
1440       switch (howto->complain_on_overflow)
1441         {
1442         case complain_overflow_signed:
1443           /* If any sign bits are set, all sign bits must be set.
1444              That is, A must be a valid negative address after
1445              shifting.  */
1446           signmask = ~(fieldmask >> 1);
1447           /* Fall thru */
1448
1449         case complain_overflow_bitfield:
1450           /* Much like the signed check, but for a field one bit
1451              wider.  We allow a bitfield to represent numbers in the
1452              range -2**n to 2**n-1, where n is the number of bits in the
1453              field.  Note that when bfd_vma is 32 bits, a 32-bit reloc
1454              can't overflow, which is exactly what we want.  */
1455           ss = a & signmask;
1456           if (ss != 0 && ss != (addrmask & signmask))
1457             flag = bfd_reloc_overflow;
1458
1459           /* We only need this next bit of code if the sign bit of B
1460              is below the sign bit of A.  This would only happen if
1461              SRC_MASK had fewer bits than BITSIZE.  Note that if
1462              SRC_MASK has more bits than BITSIZE, we can get into
1463              trouble; we would need to verify that B is in range, as
1464              we do for A above.  */
1465           ss = ((~howto->src_mask) >> 1) & howto->src_mask;
1466           ss >>= bitpos;
1467
1468           /* Set all the bits above the sign bit.  */
1469           b = (b ^ ss) - ss;
1470
1471           /* Now we can do the addition.  */
1472           sum = a + b;
1473
1474           /* See if the result has the correct sign.  Bits above the
1475              sign bit are junk now; ignore them.  If the sum is
1476              positive, make sure we did not have all negative inputs;
1477              if the sum is negative, make sure we did not have all
1478              positive inputs.  The test below looks only at the sign
1479              bits, and it really just
1480                  SIGN (A) == SIGN (B) && SIGN (A) != SIGN (SUM)
1481
1482              We mask with addrmask here to explicitly allow an address
1483              wrap-around.  The Linux kernel relies on it, and it is
1484              the only way to write assembler code which can run when
1485              loaded at a location 0x80000000 away from the location at
1486              which it is linked.  */
1487           if (((~(a ^ b)) & (a ^ sum)) & signmask & addrmask)
1488             flag = bfd_reloc_overflow;
1489           break;
1490
1491         case complain_overflow_unsigned:
1492           /* Checking for an unsigned overflow is relatively easy:
1493              trim the addresses and add, and trim the result as well.
1494              Overflow is normally indicated when the result does not
1495              fit in the field.  However, we also need to consider the
1496              case when, e.g., fieldmask is 0x7fffffff or smaller, an
1497              input is 0x80000000, and bfd_vma is only 32 bits; then we
1498              will get sum == 0, but there is an overflow, since the
1499              inputs did not fit in the field.  Instead of doing a
1500              separate test, we can check for this by or-ing in the
1501              operands when testing for the sum overflowing its final
1502              field.  */
1503           sum = (a + b) & addrmask;
1504           if ((a | b | sum) & signmask)
1505             flag = bfd_reloc_overflow;
1506           break;
1507
1508         default:
1509           abort ();
1510         }
1511     }
1512
1513   /* Put RELOCATION in the right bits.  */
1514   relocation >>= (bfd_vma) rightshift;
1515   relocation <<= (bfd_vma) bitpos;
1516
1517   /* Add RELOCATION to the right bits of X.  */
1518   x = ((x & ~howto->dst_mask)
1519        | (((x & howto->src_mask) + relocation) & howto->dst_mask));
1520
1521   /* Put the relocated value back in the object file.  */
1522   switch (size)
1523     {
1524     default:
1525       abort ();
1526     case 1:
1527       bfd_put_8 (input_bfd, x, location);
1528       break;
1529     case 2:
1530       bfd_put_16 (input_bfd, x, location);
1531       break;
1532     case 4:
1533       bfd_put_32 (input_bfd, x, location);
1534       break;
1535     case 8:
1536 #ifdef BFD64
1537       bfd_put_64 (input_bfd, x, location);
1538 #else
1539       abort ();
1540 #endif
1541       break;
1542     }
1543
1544   return flag;
1545 }
1546
1547 /* Clear a given location using a given howto, by applying a relocation value
1548    of zero and discarding any in-place addend.  This is used for fixed-up
1549    relocations against discarded symbols, to make ignorable debug or unwind
1550    information more obvious.  */
1551
1552 void
1553 _bfd_clear_contents (reloc_howto_type *howto,
1554                      bfd *input_bfd,
1555                      bfd_byte *location)
1556 {
1557   int size;
1558   bfd_vma x = 0;
1559
1560   /* Get the value we are going to relocate.  */
1561   size = bfd_get_reloc_size (howto);
1562   switch (size)
1563     {
1564     default:
1565     case 0:
1566       abort ();
1567     case 1:
1568       x = bfd_get_8 (input_bfd, location);
1569       break;
1570     case 2:
1571       x = bfd_get_16 (input_bfd, location);
1572       break;
1573     case 4:
1574       x = bfd_get_32 (input_bfd, location);
1575       break;
1576     case 8:
1577 #ifdef BFD64
1578       x = bfd_get_64 (input_bfd, location);
1579 #else
1580       abort ();
1581 #endif
1582       break;
1583     }
1584
1585   /* Zero out the unwanted bits of X.  */
1586   x &= ~howto->dst_mask;
1587
1588   /* Put the relocated value back in the object file.  */
1589   switch (size)
1590     {
1591     default:
1592     case 0:
1593       abort ();
1594     case 1:
1595       bfd_put_8 (input_bfd, x, location);
1596       break;
1597     case 2:
1598       bfd_put_16 (input_bfd, x, location);
1599       break;
1600     case 4:
1601       bfd_put_32 (input_bfd, x, location);
1602       break;
1603     case 8:
1604 #ifdef BFD64
1605       bfd_put_64 (input_bfd, x, location);
1606 #else
1607       abort ();
1608 #endif
1609       break;
1610     }
1611 }
1612
1613 /*
1614 DOCDD
1615 INODE
1616         howto manager,  , typedef arelent, Relocations
1617
1618 SUBSECTION
1619         The howto manager
1620
1621         When an application wants to create a relocation, but doesn't
1622         know what the target machine might call it, it can find out by
1623         using this bit of code.
1624
1625 */
1626
1627 /*
1628 TYPEDEF
1629         bfd_reloc_code_type
1630
1631 DESCRIPTION
1632         The insides of a reloc code.  The idea is that, eventually, there
1633         will be one enumerator for every type of relocation we ever do.
1634         Pass one of these values to <<bfd_reloc_type_lookup>>, and it'll
1635         return a howto pointer.
1636
1637         This does mean that the application must determine the correct
1638         enumerator value; you can't get a howto pointer from a random set
1639         of attributes.
1640
1641 SENUM
1642    bfd_reloc_code_real
1643
1644 ENUM
1645   BFD_RELOC_64
1646 ENUMX
1647   BFD_RELOC_32
1648 ENUMX
1649   BFD_RELOC_26
1650 ENUMX
1651   BFD_RELOC_24
1652 ENUMX
1653   BFD_RELOC_16
1654 ENUMX
1655   BFD_RELOC_14
1656 ENUMX
1657   BFD_RELOC_8
1658 ENUMDOC
1659   Basic absolute relocations of N bits.
1660
1661 ENUM
1662   BFD_RELOC_64_PCREL
1663 ENUMX
1664   BFD_RELOC_32_PCREL
1665 ENUMX
1666   BFD_RELOC_24_PCREL
1667 ENUMX
1668   BFD_RELOC_16_PCREL
1669 ENUMX
1670   BFD_RELOC_12_PCREL
1671 ENUMX
1672   BFD_RELOC_8_PCREL
1673 ENUMDOC
1674   PC-relative relocations.  Sometimes these are relative to the address
1675 of the relocation itself; sometimes they are relative to the start of
1676 the section containing the relocation.  It depends on the specific target.
1677
1678 The 24-bit relocation is used in some Intel 960 configurations.
1679
1680 ENUM
1681   BFD_RELOC_32_SECREL
1682 ENUMDOC
1683   Section relative relocations.  Some targets need this for DWARF2.
1684
1685 ENUM
1686   BFD_RELOC_32_GOT_PCREL
1687 ENUMX
1688   BFD_RELOC_16_GOT_PCREL
1689 ENUMX
1690   BFD_RELOC_8_GOT_PCREL
1691 ENUMX
1692   BFD_RELOC_32_GOTOFF
1693 ENUMX
1694   BFD_RELOC_16_GOTOFF
1695 ENUMX
1696   BFD_RELOC_LO16_GOTOFF
1697 ENUMX
1698   BFD_RELOC_HI16_GOTOFF
1699 ENUMX
1700   BFD_RELOC_HI16_S_GOTOFF
1701 ENUMX
1702   BFD_RELOC_8_GOTOFF
1703 ENUMX
1704   BFD_RELOC_64_PLT_PCREL
1705 ENUMX
1706   BFD_RELOC_32_PLT_PCREL
1707 ENUMX
1708   BFD_RELOC_24_PLT_PCREL
1709 ENUMX
1710   BFD_RELOC_16_PLT_PCREL
1711 ENUMX
1712   BFD_RELOC_8_PLT_PCREL
1713 ENUMX
1714   BFD_RELOC_64_PLTOFF
1715 ENUMX
1716   BFD_RELOC_32_PLTOFF
1717 ENUMX
1718   BFD_RELOC_16_PLTOFF
1719 ENUMX
1720   BFD_RELOC_LO16_PLTOFF
1721 ENUMX
1722   BFD_RELOC_HI16_PLTOFF
1723 ENUMX
1724   BFD_RELOC_HI16_S_PLTOFF
1725 ENUMX
1726   BFD_RELOC_8_PLTOFF
1727 ENUMDOC
1728   For ELF.
1729
1730 ENUM
1731   BFD_RELOC_68K_GLOB_DAT
1732 ENUMX
1733   BFD_RELOC_68K_JMP_SLOT
1734 ENUMX
1735   BFD_RELOC_68K_RELATIVE
1736 ENUMX
1737   BFD_RELOC_68K_TLS_GD32
1738 ENUMX
1739   BFD_RELOC_68K_TLS_GD16
1740 ENUMX
1741   BFD_RELOC_68K_TLS_GD8
1742 ENUMX
1743   BFD_RELOC_68K_TLS_LDM32
1744 ENUMX
1745   BFD_RELOC_68K_TLS_LDM16
1746 ENUMX
1747   BFD_RELOC_68K_TLS_LDM8
1748 ENUMX
1749   BFD_RELOC_68K_TLS_LDO32
1750 ENUMX
1751   BFD_RELOC_68K_TLS_LDO16
1752 ENUMX
1753   BFD_RELOC_68K_TLS_LDO8
1754 ENUMX
1755   BFD_RELOC_68K_TLS_IE32
1756 ENUMX
1757   BFD_RELOC_68K_TLS_IE16
1758 ENUMX
1759   BFD_RELOC_68K_TLS_IE8
1760 ENUMX
1761   BFD_RELOC_68K_TLS_LE32
1762 ENUMX
1763   BFD_RELOC_68K_TLS_LE16
1764 ENUMX
1765   BFD_RELOC_68K_TLS_LE8
1766 ENUMDOC
1767   Relocations used by 68K ELF.
1768
1769 ENUM
1770   BFD_RELOC_32_BASEREL
1771 ENUMX
1772   BFD_RELOC_16_BASEREL
1773 ENUMX
1774   BFD_RELOC_LO16_BASEREL
1775 ENUMX
1776   BFD_RELOC_HI16_BASEREL
1777 ENUMX
1778   BFD_RELOC_HI16_S_BASEREL
1779 ENUMX
1780   BFD_RELOC_8_BASEREL
1781 ENUMX
1782   BFD_RELOC_RVA
1783 ENUMDOC
1784   Linkage-table relative.
1785
1786 ENUM
1787   BFD_RELOC_8_FFnn
1788 ENUMDOC
1789   Absolute 8-bit relocation, but used to form an address like 0xFFnn.
1790
1791 ENUM
1792   BFD_RELOC_32_PCREL_S2
1793 ENUMX
1794   BFD_RELOC_16_PCREL_S2
1795 ENUMX
1796   BFD_RELOC_23_PCREL_S2
1797 ENUMDOC
1798   These PC-relative relocations are stored as word displacements --
1799 i.e., byte displacements shifted right two bits.  The 30-bit word
1800 displacement (<<32_PCREL_S2>> -- 32 bits, shifted 2) is used on the
1801 SPARC.  (SPARC tools generally refer to this as <<WDISP30>>.)  The
1802 signed 16-bit displacement is used on the MIPS, and the 23-bit
1803 displacement is used on the Alpha.
1804
1805 ENUM
1806   BFD_RELOC_HI22
1807 ENUMX
1808   BFD_RELOC_LO10
1809 ENUMDOC
1810   High 22 bits and low 10 bits of 32-bit value, placed into lower bits of
1811 the target word.  These are used on the SPARC.
1812
1813 ENUM
1814   BFD_RELOC_GPREL16
1815 ENUMX
1816   BFD_RELOC_GPREL32
1817 ENUMDOC
1818   For systems that allocate a Global Pointer register, these are
1819 displacements off that register.  These relocation types are
1820 handled specially, because the value the register will have is
1821 decided relatively late.
1822
1823 ENUM
1824   BFD_RELOC_I960_CALLJ
1825 ENUMDOC
1826   Reloc types used for i960/b.out.
1827
1828 ENUM
1829   BFD_RELOC_NONE
1830 ENUMX
1831   BFD_RELOC_SPARC_WDISP22
1832 ENUMX
1833   BFD_RELOC_SPARC22
1834 ENUMX
1835   BFD_RELOC_SPARC13
1836 ENUMX
1837   BFD_RELOC_SPARC_GOT10
1838 ENUMX
1839   BFD_RELOC_SPARC_GOT13
1840 ENUMX
1841   BFD_RELOC_SPARC_GOT22
1842 ENUMX
1843   BFD_RELOC_SPARC_PC10
1844 ENUMX
1845   BFD_RELOC_SPARC_PC22
1846 ENUMX
1847   BFD_RELOC_SPARC_WPLT30
1848 ENUMX
1849   BFD_RELOC_SPARC_COPY
1850 ENUMX
1851   BFD_RELOC_SPARC_GLOB_DAT
1852 ENUMX
1853   BFD_RELOC_SPARC_JMP_SLOT
1854 ENUMX
1855   BFD_RELOC_SPARC_RELATIVE
1856 ENUMX
1857   BFD_RELOC_SPARC_UA16
1858 ENUMX
1859   BFD_RELOC_SPARC_UA32
1860 ENUMX
1861   BFD_RELOC_SPARC_UA64
1862 ENUMX
1863   BFD_RELOC_SPARC_GOTDATA_HIX22
1864 ENUMX
1865   BFD_RELOC_SPARC_GOTDATA_LOX10
1866 ENUMX
1867   BFD_RELOC_SPARC_GOTDATA_OP_HIX22
1868 ENUMX
1869   BFD_RELOC_SPARC_GOTDATA_OP_LOX10
1870 ENUMX
1871   BFD_RELOC_SPARC_GOTDATA_OP
1872 ENUMX
1873   BFD_RELOC_SPARC_JMP_IREL
1874 ENUMX
1875   BFD_RELOC_SPARC_IRELATIVE
1876 ENUMDOC
1877   SPARC ELF relocations.  There is probably some overlap with other
1878   relocation types already defined.
1879
1880 ENUM
1881   BFD_RELOC_SPARC_BASE13
1882 ENUMX
1883   BFD_RELOC_SPARC_BASE22
1884 ENUMDOC
1885   I think these are specific to SPARC a.out (e.g., Sun 4).
1886
1887 ENUMEQ
1888   BFD_RELOC_SPARC_64
1889   BFD_RELOC_64
1890 ENUMX
1891   BFD_RELOC_SPARC_10
1892 ENUMX
1893   BFD_RELOC_SPARC_11
1894 ENUMX
1895   BFD_RELOC_SPARC_OLO10
1896 ENUMX
1897   BFD_RELOC_SPARC_HH22
1898 ENUMX
1899   BFD_RELOC_SPARC_HM10
1900 ENUMX
1901   BFD_RELOC_SPARC_LM22
1902 ENUMX
1903   BFD_RELOC_SPARC_PC_HH22
1904 ENUMX
1905   BFD_RELOC_SPARC_PC_HM10
1906 ENUMX
1907   BFD_RELOC_SPARC_PC_LM22
1908 ENUMX
1909   BFD_RELOC_SPARC_WDISP16
1910 ENUMX
1911   BFD_RELOC_SPARC_WDISP19
1912 ENUMX
1913   BFD_RELOC_SPARC_7
1914 ENUMX
1915   BFD_RELOC_SPARC_6
1916 ENUMX
1917   BFD_RELOC_SPARC_5
1918 ENUMEQX
1919   BFD_RELOC_SPARC_DISP64
1920   BFD_RELOC_64_PCREL
1921 ENUMX
1922   BFD_RELOC_SPARC_PLT32
1923 ENUMX
1924   BFD_RELOC_SPARC_PLT64
1925 ENUMX
1926   BFD_RELOC_SPARC_HIX22
1927 ENUMX
1928   BFD_RELOC_SPARC_LOX10
1929 ENUMX
1930   BFD_RELOC_SPARC_H44
1931 ENUMX
1932   BFD_RELOC_SPARC_M44
1933 ENUMX
1934   BFD_RELOC_SPARC_L44
1935 ENUMX
1936   BFD_RELOC_SPARC_REGISTER
1937 ENUMDOC
1938   SPARC64 relocations
1939
1940 ENUM
1941   BFD_RELOC_SPARC_REV32
1942 ENUMDOC
1943   SPARC little endian relocation
1944 ENUM
1945   BFD_RELOC_SPARC_TLS_GD_HI22
1946 ENUMX
1947   BFD_RELOC_SPARC_TLS_GD_LO10
1948 ENUMX
1949   BFD_RELOC_SPARC_TLS_GD_ADD
1950 ENUMX
1951   BFD_RELOC_SPARC_TLS_GD_CALL
1952 ENUMX
1953   BFD_RELOC_SPARC_TLS_LDM_HI22
1954 ENUMX
1955   BFD_RELOC_SPARC_TLS_LDM_LO10
1956 ENUMX
1957   BFD_RELOC_SPARC_TLS_LDM_ADD
1958 ENUMX
1959   BFD_RELOC_SPARC_TLS_LDM_CALL
1960 ENUMX
1961   BFD_RELOC_SPARC_TLS_LDO_HIX22
1962 ENUMX
1963   BFD_RELOC_SPARC_TLS_LDO_LOX10
1964 ENUMX
1965   BFD_RELOC_SPARC_TLS_LDO_ADD
1966 ENUMX
1967   BFD_RELOC_SPARC_TLS_IE_HI22
1968 ENUMX
1969   BFD_RELOC_SPARC_TLS_IE_LO10
1970 ENUMX
1971   BFD_RELOC_SPARC_TLS_IE_LD
1972 ENUMX
1973   BFD_RELOC_SPARC_TLS_IE_LDX
1974 ENUMX
1975   BFD_RELOC_SPARC_TLS_IE_ADD
1976 ENUMX
1977   BFD_RELOC_SPARC_TLS_LE_HIX22
1978 ENUMX
1979   BFD_RELOC_SPARC_TLS_LE_LOX10
1980 ENUMX
1981   BFD_RELOC_SPARC_TLS_DTPMOD32
1982 ENUMX
1983   BFD_RELOC_SPARC_TLS_DTPMOD64
1984 ENUMX
1985   BFD_RELOC_SPARC_TLS_DTPOFF32
1986 ENUMX
1987   BFD_RELOC_SPARC_TLS_DTPOFF64
1988 ENUMX
1989   BFD_RELOC_SPARC_TLS_TPOFF32
1990 ENUMX
1991   BFD_RELOC_SPARC_TLS_TPOFF64
1992 ENUMDOC
1993   SPARC TLS relocations
1994
1995 ENUM
1996   BFD_RELOC_SPU_IMM7
1997 ENUMX
1998   BFD_RELOC_SPU_IMM8
1999 ENUMX
2000   BFD_RELOC_SPU_IMM10
2001 ENUMX
2002   BFD_RELOC_SPU_IMM10W
2003 ENUMX
2004   BFD_RELOC_SPU_IMM16
2005 ENUMX
2006   BFD_RELOC_SPU_IMM16W
2007 ENUMX
2008   BFD_RELOC_SPU_IMM18
2009 ENUMX
2010   BFD_RELOC_SPU_PCREL9a
2011 ENUMX
2012   BFD_RELOC_SPU_PCREL9b
2013 ENUMX
2014   BFD_RELOC_SPU_PCREL16
2015 ENUMX
2016   BFD_RELOC_SPU_LO16
2017 ENUMX
2018   BFD_RELOC_SPU_HI16
2019 ENUMX
2020   BFD_RELOC_SPU_PPU32
2021 ENUMX
2022   BFD_RELOC_SPU_PPU64
2023 ENUMX
2024   BFD_RELOC_SPU_ADD_PIC
2025 ENUMDOC
2026   SPU Relocations.
2027
2028 ENUM
2029   BFD_RELOC_ALPHA_GPDISP_HI16
2030 ENUMDOC
2031   Alpha ECOFF and ELF relocations.  Some of these treat the symbol or
2032      "addend" in some special way.
2033   For GPDISP_HI16 ("gpdisp") relocations, the symbol is ignored when
2034      writing; when reading, it will be the absolute section symbol.  The
2035      addend is the displacement in bytes of the "lda" instruction from
2036      the "ldah" instruction (which is at the address of this reloc).
2037 ENUM
2038   BFD_RELOC_ALPHA_GPDISP_LO16
2039 ENUMDOC
2040   For GPDISP_LO16 ("ignore") relocations, the symbol is handled as
2041      with GPDISP_HI16 relocs.  The addend is ignored when writing the
2042      relocations out, and is filled in with the file's GP value on
2043      reading, for convenience.
2044
2045 ENUM
2046   BFD_RELOC_ALPHA_GPDISP
2047 ENUMDOC
2048   The ELF GPDISP relocation is exactly the same as the GPDISP_HI16
2049      relocation except that there is no accompanying GPDISP_LO16
2050      relocation.
2051
2052 ENUM
2053   BFD_RELOC_ALPHA_LITERAL
2054 ENUMX
2055   BFD_RELOC_ALPHA_ELF_LITERAL
2056 ENUMX
2057   BFD_RELOC_ALPHA_LITUSE
2058 ENUMDOC
2059   The Alpha LITERAL/LITUSE relocs are produced by a symbol reference;
2060      the assembler turns it into a LDQ instruction to load the address of
2061      the symbol, and then fills in a register in the real instruction.
2062
2063      The LITERAL reloc, at the LDQ instruction, refers to the .lita
2064      section symbol.  The addend is ignored when writing, but is filled
2065      in with the file's GP value on reading, for convenience, as with the
2066      GPDISP_LO16 reloc.
2067
2068      The ELF_LITERAL reloc is somewhere between 16_GOTOFF and GPDISP_LO16.
2069      It should refer to the symbol to be referenced, as with 16_GOTOFF,
2070      but it generates output not based on the position within the .got
2071      section, but relative to the GP value chosen for the file during the
2072      final link stage.
2073
2074      The LITUSE reloc, on the instruction using the loaded address, gives
2075      information to the linker that it might be able to use to optimize
2076      away some literal section references.  The symbol is ignored (read
2077      as the absolute section symbol), and the "addend" indicates the type
2078      of instruction using the register:
2079               1 - "memory" fmt insn
2080               2 - byte-manipulation (byte offset reg)
2081               3 - jsr (target of branch)
2082
2083 ENUM
2084   BFD_RELOC_ALPHA_HINT
2085 ENUMDOC
2086   The HINT relocation indicates a value that should be filled into the
2087      "hint" field of a jmp/jsr/ret instruction, for possible branch-
2088      prediction logic which may be provided on some processors.
2089
2090 ENUM
2091   BFD_RELOC_ALPHA_LINKAGE
2092 ENUMDOC
2093   The LINKAGE relocation outputs a linkage pair in the object file,
2094      which is filled by the linker.
2095
2096 ENUM
2097   BFD_RELOC_ALPHA_CODEADDR
2098 ENUMDOC
2099   The CODEADDR relocation outputs a STO_CA in the object file,
2100      which is filled by the linker.
2101
2102 ENUM
2103   BFD_RELOC_ALPHA_GPREL_HI16
2104 ENUMX
2105   BFD_RELOC_ALPHA_GPREL_LO16
2106 ENUMDOC
2107   The GPREL_HI/LO relocations together form a 32-bit offset from the
2108      GP register.
2109
2110 ENUM
2111   BFD_RELOC_ALPHA_BRSGP
2112 ENUMDOC
2113   Like BFD_RELOC_23_PCREL_S2, except that the source and target must
2114   share a common GP, and the target address is adjusted for
2115   STO_ALPHA_STD_GPLOAD.
2116
2117 ENUM
2118   BFD_RELOC_ALPHA_NOP
2119 ENUMDOC
2120   The NOP relocation outputs a NOP if the longword displacement
2121      between two procedure entry points is < 2^21.
2122
2123 ENUM
2124   BFD_RELOC_ALPHA_BSR
2125 ENUMDOC
2126   The BSR relocation outputs a BSR if the longword displacement
2127      between two procedure entry points is < 2^21.
2128
2129 ENUM
2130   BFD_RELOC_ALPHA_LDA
2131 ENUMDOC
2132   The LDA relocation outputs a LDA if the longword displacement
2133      between two procedure entry points is < 2^16.
2134
2135 ENUM
2136   BFD_RELOC_ALPHA_BOH
2137 ENUMDOC
2138   The BOH relocation outputs a BSR if the longword displacement
2139      between two procedure entry points is < 2^21, or else a hint.
2140
2141 ENUM
2142   BFD_RELOC_ALPHA_TLSGD
2143 ENUMX
2144   BFD_RELOC_ALPHA_TLSLDM
2145 ENUMX
2146   BFD_RELOC_ALPHA_DTPMOD64
2147 ENUMX
2148   BFD_RELOC_ALPHA_GOTDTPREL16
2149 ENUMX
2150   BFD_RELOC_ALPHA_DTPREL64
2151 ENUMX
2152   BFD_RELOC_ALPHA_DTPREL_HI16
2153 ENUMX
2154   BFD_RELOC_ALPHA_DTPREL_LO16
2155 ENUMX
2156   BFD_RELOC_ALPHA_DTPREL16
2157 ENUMX
2158   BFD_RELOC_ALPHA_GOTTPREL16
2159 ENUMX
2160   BFD_RELOC_ALPHA_TPREL64
2161 ENUMX
2162   BFD_RELOC_ALPHA_TPREL_HI16
2163 ENUMX
2164   BFD_RELOC_ALPHA_TPREL_LO16
2165 ENUMX
2166   BFD_RELOC_ALPHA_TPREL16
2167 ENUMDOC
2168   Alpha thread-local storage relocations.
2169
2170 ENUM
2171   BFD_RELOC_MIPS_JMP
2172 ENUMDOC
2173   Bits 27..2 of the relocation address shifted right 2 bits;
2174      simple reloc otherwise.
2175
2176 ENUM
2177   BFD_RELOC_MIPS16_JMP
2178 ENUMDOC
2179   The MIPS16 jump instruction.
2180
2181 ENUM
2182   BFD_RELOC_MIPS16_GPREL
2183 ENUMDOC
2184   MIPS16 GP relative reloc.
2185
2186 ENUM
2187   BFD_RELOC_HI16
2188 ENUMDOC
2189   High 16 bits of 32-bit value; simple reloc.
2190 ENUM
2191   BFD_RELOC_HI16_S
2192 ENUMDOC
2193   High 16 bits of 32-bit value but the low 16 bits will be sign
2194      extended and added to form the final result.  If the low 16
2195      bits form a negative number, we need to add one to the high value
2196      to compensate for the borrow when the low bits are added.
2197 ENUM
2198   BFD_RELOC_LO16
2199 ENUMDOC
2200   Low 16 bits.
2201
2202 ENUM
2203   BFD_RELOC_HI16_PCREL
2204 ENUMDOC
2205   High 16 bits of 32-bit pc-relative value
2206 ENUM
2207   BFD_RELOC_HI16_S_PCREL
2208 ENUMDOC
2209   High 16 bits of 32-bit pc-relative value, adjusted
2210 ENUM
2211   BFD_RELOC_LO16_PCREL
2212 ENUMDOC
2213   Low 16 bits of pc-relative value
2214
2215 ENUM
2216   BFD_RELOC_MIPS16_GOT16
2217 ENUMX
2218   BFD_RELOC_MIPS16_CALL16
2219 ENUMDOC
2220   Equivalent of BFD_RELOC_MIPS_*, but with the MIPS16 layout of
2221      16-bit immediate fields
2222 ENUM
2223   BFD_RELOC_MIPS16_HI16
2224 ENUMDOC
2225   MIPS16 high 16 bits of 32-bit value.
2226 ENUM
2227   BFD_RELOC_MIPS16_HI16_S
2228 ENUMDOC
2229   MIPS16 high 16 bits of 32-bit value but the low 16 bits will be sign
2230      extended and added to form the final result.  If the low 16
2231      bits form a negative number, we need to add one to the high value
2232      to compensate for the borrow when the low bits are added.
2233 ENUM
2234   BFD_RELOC_MIPS16_LO16
2235 ENUMDOC
2236   MIPS16 low 16 bits.
2237
2238 ENUM
2239   BFD_RELOC_MIPS_LITERAL
2240 ENUMDOC
2241   Relocation against a MIPS literal section.
2242
2243 ENUM
2244   BFD_RELOC_MIPS_GOT16
2245 ENUMX
2246   BFD_RELOC_MIPS_CALL16
2247 ENUMX
2248   BFD_RELOC_MIPS_GOT_HI16
2249 ENUMX
2250   BFD_RELOC_MIPS_GOT_LO16
2251 ENUMX
2252   BFD_RELOC_MIPS_CALL_HI16
2253 ENUMX
2254   BFD_RELOC_MIPS_CALL_LO16
2255 ENUMX
2256   BFD_RELOC_MIPS_SUB
2257 ENUMX
2258   BFD_RELOC_MIPS_GOT_PAGE
2259 ENUMX
2260   BFD_RELOC_MIPS_GOT_OFST
2261 ENUMX
2262   BFD_RELOC_MIPS_GOT_DISP
2263 ENUMX
2264   BFD_RELOC_MIPS_SHIFT5
2265 ENUMX
2266   BFD_RELOC_MIPS_SHIFT6
2267 ENUMX
2268   BFD_RELOC_MIPS_INSERT_A
2269 ENUMX
2270   BFD_RELOC_MIPS_INSERT_B
2271 ENUMX
2272   BFD_RELOC_MIPS_DELETE
2273 ENUMX
2274   BFD_RELOC_MIPS_HIGHEST
2275 ENUMX
2276   BFD_RELOC_MIPS_HIGHER
2277 ENUMX
2278   BFD_RELOC_MIPS_SCN_DISP
2279 ENUMX
2280   BFD_RELOC_MIPS_REL16
2281 ENUMX
2282   BFD_RELOC_MIPS_RELGOT
2283 ENUMX
2284   BFD_RELOC_MIPS_JALR
2285 ENUMX
2286   BFD_RELOC_MIPS_TLS_DTPMOD32
2287 ENUMX
2288   BFD_RELOC_MIPS_TLS_DTPREL32
2289 ENUMX
2290   BFD_RELOC_MIPS_TLS_DTPMOD64
2291 ENUMX
2292   BFD_RELOC_MIPS_TLS_DTPREL64
2293 ENUMX
2294   BFD_RELOC_MIPS_TLS_GD
2295 ENUMX
2296   BFD_RELOC_MIPS_TLS_LDM
2297 ENUMX
2298   BFD_RELOC_MIPS_TLS_DTPREL_HI16
2299 ENUMX
2300   BFD_RELOC_MIPS_TLS_DTPREL_LO16
2301 ENUMX
2302   BFD_RELOC_MIPS_TLS_GOTTPREL
2303 ENUMX
2304   BFD_RELOC_MIPS_TLS_TPREL32
2305 ENUMX
2306   BFD_RELOC_MIPS_TLS_TPREL64
2307 ENUMX
2308   BFD_RELOC_MIPS_TLS_TPREL_HI16
2309 ENUMX
2310   BFD_RELOC_MIPS_TLS_TPREL_LO16
2311 ENUMDOC
2312   MIPS ELF relocations.
2313 COMMENT
2314
2315 ENUM
2316   BFD_RELOC_MIPS_COPY
2317 ENUMX
2318   BFD_RELOC_MIPS_JUMP_SLOT
2319 ENUMDOC
2320   MIPS ELF relocations (VxWorks and PLT extensions).
2321 COMMENT
2322
2323 ENUM
2324   BFD_RELOC_MOXIE_10_PCREL
2325 ENUMDOC
2326   Moxie ELF relocations.
2327 COMMENT
2328
2329 ENUM
2330   BFD_RELOC_FRV_LABEL16
2331 ENUMX
2332   BFD_RELOC_FRV_LABEL24
2333 ENUMX
2334   BFD_RELOC_FRV_LO16
2335 ENUMX
2336   BFD_RELOC_FRV_HI16
2337 ENUMX
2338   BFD_RELOC_FRV_GPREL12
2339 ENUMX
2340   BFD_RELOC_FRV_GPRELU12
2341 ENUMX
2342   BFD_RELOC_FRV_GPREL32
2343 ENUMX
2344   BFD_RELOC_FRV_GPRELHI
2345 ENUMX
2346   BFD_RELOC_FRV_GPRELLO
2347 ENUMX
2348   BFD_RELOC_FRV_GOT12
2349 ENUMX
2350   BFD_RELOC_FRV_GOTHI
2351 ENUMX
2352   BFD_RELOC_FRV_GOTLO
2353 ENUMX
2354   BFD_RELOC_FRV_FUNCDESC
2355 ENUMX
2356   BFD_RELOC_FRV_FUNCDESC_GOT12
2357 ENUMX
2358   BFD_RELOC_FRV_FUNCDESC_GOTHI
2359 ENUMX
2360   BFD_RELOC_FRV_FUNCDESC_GOTLO
2361 ENUMX
2362   BFD_RELOC_FRV_FUNCDESC_VALUE
2363 ENUMX
2364   BFD_RELOC_FRV_FUNCDESC_GOTOFF12
2365 ENUMX
2366   BFD_RELOC_FRV_FUNCDESC_GOTOFFHI
2367 ENUMX
2368   BFD_RELOC_FRV_FUNCDESC_GOTOFFLO
2369 ENUMX
2370   BFD_RELOC_FRV_GOTOFF12
2371 ENUMX
2372   BFD_RELOC_FRV_GOTOFFHI
2373 ENUMX
2374   BFD_RELOC_FRV_GOTOFFLO
2375 ENUMX
2376   BFD_RELOC_FRV_GETTLSOFF
2377 ENUMX
2378   BFD_RELOC_FRV_TLSDESC_VALUE
2379 ENUMX
2380   BFD_RELOC_FRV_GOTTLSDESC12
2381 ENUMX
2382   BFD_RELOC_FRV_GOTTLSDESCHI
2383 ENUMX
2384   BFD_RELOC_FRV_GOTTLSDESCLO
2385 ENUMX
2386   BFD_RELOC_FRV_TLSMOFF12
2387 ENUMX
2388   BFD_RELOC_FRV_TLSMOFFHI
2389 ENUMX
2390   BFD_RELOC_FRV_TLSMOFFLO
2391 ENUMX
2392   BFD_RELOC_FRV_GOTTLSOFF12
2393 ENUMX
2394   BFD_RELOC_FRV_GOTTLSOFFHI
2395 ENUMX
2396   BFD_RELOC_FRV_GOTTLSOFFLO
2397 ENUMX
2398   BFD_RELOC_FRV_TLSOFF
2399 ENUMX
2400   BFD_RELOC_FRV_TLSDESC_RELAX
2401 ENUMX
2402   BFD_RELOC_FRV_GETTLSOFF_RELAX
2403 ENUMX
2404   BFD_RELOC_FRV_TLSOFF_RELAX
2405 ENUMX
2406   BFD_RELOC_FRV_TLSMOFF
2407 ENUMDOC
2408   Fujitsu Frv Relocations.
2409 COMMENT
2410
2411 ENUM
2412   BFD_RELOC_MN10300_GOTOFF24
2413 ENUMDOC
2414   This is a 24bit GOT-relative reloc for the mn10300.
2415 ENUM
2416   BFD_RELOC_MN10300_GOT32
2417 ENUMDOC
2418   This is a 32bit GOT-relative reloc for the mn10300, offset by two bytes
2419   in the instruction.
2420 ENUM
2421   BFD_RELOC_MN10300_GOT24
2422 ENUMDOC
2423   This is a 24bit GOT-relative reloc for the mn10300, offset by two bytes
2424   in the instruction.
2425 ENUM
2426   BFD_RELOC_MN10300_GOT16
2427 ENUMDOC
2428   This is a 16bit GOT-relative reloc for the mn10300, offset by two bytes
2429   in the instruction.
2430 ENUM
2431   BFD_RELOC_MN10300_COPY
2432 ENUMDOC
2433   Copy symbol at runtime.
2434 ENUM
2435   BFD_RELOC_MN10300_GLOB_DAT
2436 ENUMDOC
2437   Create GOT entry.
2438 ENUM
2439   BFD_RELOC_MN10300_JMP_SLOT
2440 ENUMDOC
2441   Create PLT entry.
2442 ENUM
2443   BFD_RELOC_MN10300_RELATIVE
2444 ENUMDOC
2445   Adjust by program base.
2446 ENUM
2447   BFD_RELOC_MN10300_SYM_DIFF
2448 ENUMDOC
2449   Together with another reloc targeted at the same location,
2450   allows for a value that is the difference of two symbols
2451   in the same section.
2452 ENUM
2453   BFD_RELOC_MN10300_ALIGN
2454 ENUMDOC
2455   The addend of this reloc is an alignment power that must
2456   be honoured at the offset's location, regardless of linker
2457   relaxation.
2458 COMMENT
2459
2460 ENUM
2461   BFD_RELOC_386_GOT32
2462 ENUMX
2463   BFD_RELOC_386_PLT32
2464 ENUMX
2465   BFD_RELOC_386_COPY
2466 ENUMX
2467   BFD_RELOC_386_GLOB_DAT
2468 ENUMX
2469   BFD_RELOC_386_JUMP_SLOT
2470 ENUMX
2471   BFD_RELOC_386_RELATIVE
2472 ENUMX
2473   BFD_RELOC_386_GOTOFF
2474 ENUMX
2475   BFD_RELOC_386_GOTPC
2476 ENUMX
2477   BFD_RELOC_386_TLS_TPOFF
2478 ENUMX
2479   BFD_RELOC_386_TLS_IE
2480 ENUMX
2481   BFD_RELOC_386_TLS_GOTIE
2482 ENUMX
2483   BFD_RELOC_386_TLS_LE
2484 ENUMX
2485   BFD_RELOC_386_TLS_GD
2486 ENUMX
2487   BFD_RELOC_386_TLS_LDM
2488 ENUMX
2489   BFD_RELOC_386_TLS_LDO_32
2490 ENUMX
2491   BFD_RELOC_386_TLS_IE_32
2492 ENUMX
2493   BFD_RELOC_386_TLS_LE_32
2494 ENUMX
2495   BFD_RELOC_386_TLS_DTPMOD32
2496 ENUMX
2497   BFD_RELOC_386_TLS_DTPOFF32
2498 ENUMX
2499   BFD_RELOC_386_TLS_TPOFF32
2500 ENUMX
2501   BFD_RELOC_386_TLS_GOTDESC
2502 ENUMX
2503   BFD_RELOC_386_TLS_DESC_CALL
2504 ENUMX
2505   BFD_RELOC_386_TLS_DESC
2506 ENUMX
2507   BFD_RELOC_386_IRELATIVE
2508 ENUMDOC
2509   i386/elf relocations
2510
2511 ENUM
2512   BFD_RELOC_X86_64_GOT32
2513 ENUMX
2514   BFD_RELOC_X86_64_PLT32
2515 ENUMX
2516   BFD_RELOC_X86_64_COPY
2517 ENUMX
2518   BFD_RELOC_X86_64_GLOB_DAT
2519 ENUMX
2520   BFD_RELOC_X86_64_JUMP_SLOT
2521 ENUMX
2522   BFD_RELOC_X86_64_RELATIVE
2523 ENUMX
2524   BFD_RELOC_X86_64_GOTPCREL
2525 ENUMX
2526   BFD_RELOC_X86_64_32S
2527 ENUMX
2528   BFD_RELOC_X86_64_DTPMOD64
2529 ENUMX
2530   BFD_RELOC_X86_64_DTPOFF64
2531 ENUMX
2532   BFD_RELOC_X86_64_TPOFF64
2533 ENUMX
2534   BFD_RELOC_X86_64_TLSGD
2535 ENUMX
2536   BFD_RELOC_X86_64_TLSLD
2537 ENUMX
2538   BFD_RELOC_X86_64_DTPOFF32
2539 ENUMX
2540   BFD_RELOC_X86_64_GOTTPOFF
2541 ENUMX
2542   BFD_RELOC_X86_64_TPOFF32
2543 ENUMX
2544   BFD_RELOC_X86_64_GOTOFF64
2545 ENUMX
2546   BFD_RELOC_X86_64_GOTPC32
2547 ENUMX
2548   BFD_RELOC_X86_64_GOT64
2549 ENUMX
2550   BFD_RELOC_X86_64_GOTPCREL64
2551 ENUMX
2552   BFD_RELOC_X86_64_GOTPC64
2553 ENUMX
2554   BFD_RELOC_X86_64_GOTPLT64
2555 ENUMX
2556   BFD_RELOC_X86_64_PLTOFF64
2557 ENUMX
2558   BFD_RELOC_X86_64_GOTPC32_TLSDESC
2559 ENUMX
2560   BFD_RELOC_X86_64_TLSDESC_CALL
2561 ENUMX
2562   BFD_RELOC_X86_64_TLSDESC
2563 ENUMX
2564   BFD_RELOC_X86_64_IRELATIVE
2565 ENUMDOC
2566   x86-64/elf relocations
2567
2568 ENUM
2569   BFD_RELOC_NS32K_IMM_8
2570 ENUMX
2571   BFD_RELOC_NS32K_IMM_16
2572 ENUMX
2573   BFD_RELOC_NS32K_IMM_32
2574 ENUMX
2575   BFD_RELOC_NS32K_IMM_8_PCREL
2576 ENUMX
2577   BFD_RELOC_NS32K_IMM_16_PCREL
2578 ENUMX
2579   BFD_RELOC_NS32K_IMM_32_PCREL
2580 ENUMX
2581   BFD_RELOC_NS32K_DISP_8
2582 ENUMX
2583   BFD_RELOC_NS32K_DISP_16
2584 ENUMX
2585   BFD_RELOC_NS32K_DISP_32
2586 ENUMX
2587   BFD_RELOC_NS32K_DISP_8_PCREL
2588 ENUMX
2589   BFD_RELOC_NS32K_DISP_16_PCREL
2590 ENUMX
2591   BFD_RELOC_NS32K_DISP_32_PCREL
2592 ENUMDOC
2593   ns32k relocations
2594
2595 ENUM
2596   BFD_RELOC_PDP11_DISP_8_PCREL
2597 ENUMX
2598   BFD_RELOC_PDP11_DISP_6_PCREL
2599 ENUMDOC
2600   PDP11 relocations
2601
2602 ENUM
2603   BFD_RELOC_PJ_CODE_HI16
2604 ENUMX
2605   BFD_RELOC_PJ_CODE_LO16
2606 ENUMX
2607   BFD_RELOC_PJ_CODE_DIR16
2608 ENUMX
2609   BFD_RELOC_PJ_CODE_DIR32
2610 ENUMX
2611   BFD_RELOC_PJ_CODE_REL16
2612 ENUMX
2613   BFD_RELOC_PJ_CODE_REL32
2614 ENUMDOC
2615   Picojava relocs.  Not all of these appear in object files.
2616
2617 ENUM
2618   BFD_RELOC_PPC_B26
2619 ENUMX
2620   BFD_RELOC_PPC_BA26
2621 ENUMX
2622   BFD_RELOC_PPC_TOC16
2623 ENUMX
2624   BFD_RELOC_PPC_B16
2625 ENUMX
2626   BFD_RELOC_PPC_B16_BRTAKEN
2627 ENUMX
2628   BFD_RELOC_PPC_B16_BRNTAKEN
2629 ENUMX
2630   BFD_RELOC_PPC_BA16
2631 ENUMX
2632   BFD_RELOC_PPC_BA16_BRTAKEN
2633 ENUMX
2634   BFD_RELOC_PPC_BA16_BRNTAKEN
2635 ENUMX
2636   BFD_RELOC_PPC_COPY
2637 ENUMX
2638   BFD_RELOC_PPC_GLOB_DAT
2639 ENUMX
2640   BFD_RELOC_PPC_JMP_SLOT
2641 ENUMX
2642   BFD_RELOC_PPC_RELATIVE
2643 ENUMX
2644   BFD_RELOC_PPC_LOCAL24PC
2645 ENUMX
2646   BFD_RELOC_PPC_EMB_NADDR32
2647 ENUMX
2648   BFD_RELOC_PPC_EMB_NADDR16
2649 ENUMX
2650   BFD_RELOC_PPC_EMB_NADDR16_LO
2651 ENUMX
2652   BFD_RELOC_PPC_EMB_NADDR16_HI
2653 ENUMX
2654   BFD_RELOC_PPC_EMB_NADDR16_HA
2655 ENUMX
2656   BFD_RELOC_PPC_EMB_SDAI16
2657 ENUMX
2658   BFD_RELOC_PPC_EMB_SDA2I16
2659 ENUMX
2660   BFD_RELOC_PPC_EMB_SDA2REL
2661 ENUMX
2662   BFD_RELOC_PPC_EMB_SDA21
2663 ENUMX
2664   BFD_RELOC_PPC_EMB_MRKREF
2665 ENUMX
2666   BFD_RELOC_PPC_EMB_RELSEC16
2667 ENUMX
2668   BFD_RELOC_PPC_EMB_RELST_LO
2669 ENUMX
2670   BFD_RELOC_PPC_EMB_RELST_HI
2671 ENUMX
2672   BFD_RELOC_PPC_EMB_RELST_HA
2673 ENUMX
2674   BFD_RELOC_PPC_EMB_BIT_FLD
2675 ENUMX
2676   BFD_RELOC_PPC_EMB_RELSDA
2677 ENUMX
2678   BFD_RELOC_PPC64_HIGHER
2679 ENUMX
2680   BFD_RELOC_PPC64_HIGHER_S
2681 ENUMX
2682   BFD_RELOC_PPC64_HIGHEST
2683 ENUMX
2684   BFD_RELOC_PPC64_HIGHEST_S
2685 ENUMX
2686   BFD_RELOC_PPC64_TOC16_LO
2687 ENUMX
2688   BFD_RELOC_PPC64_TOC16_HI
2689 ENUMX
2690   BFD_RELOC_PPC64_TOC16_HA
2691 ENUMX
2692   BFD_RELOC_PPC64_TOC
2693 ENUMX
2694   BFD_RELOC_PPC64_PLTGOT16
2695 ENUMX
2696   BFD_RELOC_PPC64_PLTGOT16_LO
2697 ENUMX
2698   BFD_RELOC_PPC64_PLTGOT16_HI
2699 ENUMX
2700   BFD_RELOC_PPC64_PLTGOT16_HA
2701 ENUMX
2702   BFD_RELOC_PPC64_ADDR16_DS
2703 ENUMX
2704   BFD_RELOC_PPC64_ADDR16_LO_DS
2705 ENUMX
2706   BFD_RELOC_PPC64_GOT16_DS
2707 ENUMX
2708   BFD_RELOC_PPC64_GOT16_LO_DS
2709 ENUMX
2710   BFD_RELOC_PPC64_PLT16_LO_DS
2711 ENUMX
2712   BFD_RELOC_PPC64_SECTOFF_DS
2713 ENUMX
2714   BFD_RELOC_PPC64_SECTOFF_LO_DS
2715 ENUMX
2716   BFD_RELOC_PPC64_TOC16_DS
2717 ENUMX
2718   BFD_RELOC_PPC64_TOC16_LO_DS
2719 ENUMX
2720   BFD_RELOC_PPC64_PLTGOT16_DS
2721 ENUMX
2722   BFD_RELOC_PPC64_PLTGOT16_LO_DS
2723 ENUMDOC
2724   Power(rs6000) and PowerPC relocations.
2725
2726 ENUM
2727   BFD_RELOC_PPC_TLS
2728 ENUMX
2729   BFD_RELOC_PPC_TLSGD
2730 ENUMX
2731   BFD_RELOC_PPC_TLSLD
2732 ENUMX
2733   BFD_RELOC_PPC_DTPMOD
2734 ENUMX
2735   BFD_RELOC_PPC_TPREL16
2736 ENUMX
2737   BFD_RELOC_PPC_TPREL16_LO
2738 ENUMX
2739   BFD_RELOC_PPC_TPREL16_HI
2740 ENUMX
2741   BFD_RELOC_PPC_TPREL16_HA
2742 ENUMX
2743   BFD_RELOC_PPC_TPREL
2744 ENUMX
2745   BFD_RELOC_PPC_DTPREL16
2746 ENUMX
2747   BFD_RELOC_PPC_DTPREL16_LO
2748 ENUMX
2749   BFD_RELOC_PPC_DTPREL16_HI
2750 ENUMX
2751   BFD_RELOC_PPC_DTPREL16_HA
2752 ENUMX
2753   BFD_RELOC_PPC_DTPREL
2754 ENUMX
2755   BFD_RELOC_PPC_GOT_TLSGD16
2756 ENUMX
2757   BFD_RELOC_PPC_GOT_TLSGD16_LO
2758 ENUMX
2759   BFD_RELOC_PPC_GOT_TLSGD16_HI
2760 ENUMX
2761   BFD_RELOC_PPC_GOT_TLSGD16_HA
2762 ENUMX
2763   BFD_RELOC_PPC_GOT_TLSLD16
2764 ENUMX
2765   BFD_RELOC_PPC_GOT_TLSLD16_LO
2766 ENUMX
2767   BFD_RELOC_PPC_GOT_TLSLD16_HI
2768 ENUMX
2769   BFD_RELOC_PPC_GOT_TLSLD16_HA
2770 ENUMX
2771   BFD_RELOC_PPC_GOT_TPREL16
2772 ENUMX
2773   BFD_RELOC_PPC_GOT_TPREL16_LO
2774 ENUMX
2775   BFD_RELOC_PPC_GOT_TPREL16_HI
2776 ENUMX
2777   BFD_RELOC_PPC_GOT_TPREL16_HA
2778 ENUMX
2779   BFD_RELOC_PPC_GOT_DTPREL16
2780 ENUMX
2781   BFD_RELOC_PPC_GOT_DTPREL16_LO
2782 ENUMX
2783   BFD_RELOC_PPC_GOT_DTPREL16_HI
2784 ENUMX
2785   BFD_RELOC_PPC_GOT_DTPREL16_HA
2786 ENUMX
2787   BFD_RELOC_PPC64_TPREL16_DS
2788 ENUMX
2789   BFD_RELOC_PPC64_TPREL16_LO_DS
2790 ENUMX
2791   BFD_RELOC_PPC64_TPREL16_HIGHER
2792 ENUMX
2793   BFD_RELOC_PPC64_TPREL16_HIGHERA
2794 ENUMX
2795   BFD_RELOC_PPC64_TPREL16_HIGHEST
2796 ENUMX
2797   BFD_RELOC_PPC64_TPREL16_HIGHESTA
2798 ENUMX
2799   BFD_RELOC_PPC64_DTPREL16_DS
2800 ENUMX
2801   BFD_RELOC_PPC64_DTPREL16_LO_DS
2802 ENUMX
2803   BFD_RELOC_PPC64_DTPREL16_HIGHER
2804 ENUMX
2805   BFD_RELOC_PPC64_DTPREL16_HIGHERA
2806 ENUMX
2807   BFD_RELOC_PPC64_DTPREL16_HIGHEST
2808 ENUMX
2809   BFD_RELOC_PPC64_DTPREL16_HIGHESTA
2810 ENUMDOC
2811   PowerPC and PowerPC64 thread-local storage relocations.
2812
2813 ENUM
2814   BFD_RELOC_I370_D12
2815 ENUMDOC
2816   IBM 370/390 relocations
2817
2818 ENUM
2819   BFD_RELOC_CTOR
2820 ENUMDOC
2821   The type of reloc used to build a constructor table - at the moment
2822   probably a 32 bit wide absolute relocation, but the target can choose.
2823   It generally does map to one of the other relocation types.
2824
2825 ENUM
2826   BFD_RELOC_ARM_PCREL_BRANCH
2827 ENUMDOC
2828   ARM 26 bit pc-relative branch.  The lowest two bits must be zero and are
2829   not stored in the instruction.
2830 ENUM
2831   BFD_RELOC_ARM_PCREL_BLX
2832 ENUMDOC
2833   ARM 26 bit pc-relative branch.  The lowest bit must be zero and is
2834   not stored in the instruction.  The 2nd lowest bit comes from a 1 bit
2835   field in the instruction.
2836 ENUM
2837   BFD_RELOC_THUMB_PCREL_BLX
2838 ENUMDOC
2839   Thumb 22 bit pc-relative branch.  The lowest bit must be zero and is
2840   not stored in the instruction.  The 2nd lowest bit comes from a 1 bit
2841   field in the instruction.
2842 ENUM
2843   BFD_RELOC_ARM_PCREL_CALL
2844 ENUMDOC
2845   ARM 26-bit pc-relative branch for an unconditional BL or BLX instruction.
2846 ENUM
2847   BFD_RELOC_ARM_PCREL_JUMP
2848 ENUMDOC
2849   ARM 26-bit pc-relative branch for B or conditional BL instruction.
2850
2851 ENUM
2852   BFD_RELOC_THUMB_PCREL_BRANCH7
2853 ENUMX
2854   BFD_RELOC_THUMB_PCREL_BRANCH9
2855 ENUMX
2856   BFD_RELOC_THUMB_PCREL_BRANCH12
2857 ENUMX
2858   BFD_RELOC_THUMB_PCREL_BRANCH20
2859 ENUMX
2860   BFD_RELOC_THUMB_PCREL_BRANCH23
2861 ENUMX
2862   BFD_RELOC_THUMB_PCREL_BRANCH25
2863 ENUMDOC
2864   Thumb 7-, 9-, 12-, 20-, 23-, and 25-bit pc-relative branches.
2865   The lowest bit must be zero and is not stored in the instruction.
2866   Note that the corresponding ELF R_ARM_THM_JUMPnn constant has an
2867   "nn" one smaller in all cases.  Note further that BRANCH23
2868   corresponds to R_ARM_THM_CALL.
2869
2870 ENUM
2871   BFD_RELOC_ARM_OFFSET_IMM
2872 ENUMDOC
2873   12-bit immediate offset, used in ARM-format ldr and str instructions.
2874
2875 ENUM
2876   BFD_RELOC_ARM_THUMB_OFFSET
2877 ENUMDOC
2878   5-bit immediate offset, used in Thumb-format ldr and str instructions.
2879
2880 ENUM
2881   BFD_RELOC_ARM_TARGET1
2882 ENUMDOC
2883   Pc-relative or absolute relocation depending on target.  Used for
2884   entries in .init_array sections.
2885 ENUM
2886   BFD_RELOC_ARM_ROSEGREL32
2887 ENUMDOC
2888   Read-only segment base relative address.
2889 ENUM
2890   BFD_RELOC_ARM_SBREL32
2891 ENUMDOC
2892   Data segment base relative address.
2893 ENUM
2894   BFD_RELOC_ARM_TARGET2
2895 ENUMDOC
2896   This reloc is used for references to RTTI data from exception handling
2897   tables.  The actual definition depends on the target.  It may be a
2898   pc-relative or some form of GOT-indirect relocation.
2899 ENUM
2900   BFD_RELOC_ARM_PREL31
2901 ENUMDOC
2902   31-bit PC relative address.
2903 ENUM
2904   BFD_RELOC_ARM_MOVW
2905 ENUMX
2906   BFD_RELOC_ARM_MOVT
2907 ENUMX
2908   BFD_RELOC_ARM_MOVW_PCREL
2909 ENUMX
2910   BFD_RELOC_ARM_MOVT_PCREL
2911 ENUMX
2912   BFD_RELOC_ARM_THUMB_MOVW
2913 ENUMX
2914   BFD_RELOC_ARM_THUMB_MOVT
2915 ENUMX
2916   BFD_RELOC_ARM_THUMB_MOVW_PCREL
2917 ENUMX
2918   BFD_RELOC_ARM_THUMB_MOVT_PCREL
2919 ENUMDOC
2920   Low and High halfword relocations for MOVW and MOVT instructions.
2921
2922 ENUM
2923   BFD_RELOC_ARM_JUMP_SLOT
2924 ENUMX
2925   BFD_RELOC_ARM_GLOB_DAT
2926 ENUMX
2927   BFD_RELOC_ARM_GOT32
2928 ENUMX
2929   BFD_RELOC_ARM_PLT32
2930 ENUMX
2931   BFD_RELOC_ARM_RELATIVE
2932 ENUMX
2933   BFD_RELOC_ARM_GOTOFF
2934 ENUMX
2935   BFD_RELOC_ARM_GOTPC
2936 ENUMX
2937   BFD_RELOC_ARM_GOT_PREL
2938 ENUMDOC
2939   Relocations for setting up GOTs and PLTs for shared libraries.
2940
2941 ENUM
2942   BFD_RELOC_ARM_TLS_GD32
2943 ENUMX
2944   BFD_RELOC_ARM_TLS_LDO32
2945 ENUMX
2946   BFD_RELOC_ARM_TLS_LDM32
2947 ENUMX
2948   BFD_RELOC_ARM_TLS_DTPOFF32
2949 ENUMX
2950   BFD_RELOC_ARM_TLS_DTPMOD32
2951 ENUMX
2952   BFD_RELOC_ARM_TLS_TPOFF32
2953 ENUMX
2954   BFD_RELOC_ARM_TLS_IE32
2955 ENUMX
2956   BFD_RELOC_ARM_TLS_LE32
2957 ENUMDOC
2958   ARM thread-local storage relocations.
2959
2960 ENUM
2961   BFD_RELOC_ARM_ALU_PC_G0_NC
2962 ENUMX
2963   BFD_RELOC_ARM_ALU_PC_G0
2964 ENUMX
2965   BFD_RELOC_ARM_ALU_PC_G1_NC
2966 ENUMX
2967   BFD_RELOC_ARM_ALU_PC_G1
2968 ENUMX
2969   BFD_RELOC_ARM_ALU_PC_G2
2970 ENUMX
2971   BFD_RELOC_ARM_LDR_PC_G0
2972 ENUMX
2973   BFD_RELOC_ARM_LDR_PC_G1
2974 ENUMX
2975   BFD_RELOC_ARM_LDR_PC_G2
2976 ENUMX
2977   BFD_RELOC_ARM_LDRS_PC_G0
2978 ENUMX
2979   BFD_RELOC_ARM_LDRS_PC_G1
2980 ENUMX
2981   BFD_RELOC_ARM_LDRS_PC_G2
2982 ENUMX
2983   BFD_RELOC_ARM_LDC_PC_G0
2984 ENUMX
2985   BFD_RELOC_ARM_LDC_PC_G1
2986 ENUMX
2987   BFD_RELOC_ARM_LDC_PC_G2
2988 ENUMX
2989   BFD_RELOC_ARM_ALU_SB_G0_NC
2990 ENUMX
2991   BFD_RELOC_ARM_ALU_SB_G0
2992 ENUMX
2993   BFD_RELOC_ARM_ALU_SB_G1_NC
2994 ENUMX
2995   BFD_RELOC_ARM_ALU_SB_G1
2996 ENUMX
2997   BFD_RELOC_ARM_ALU_SB_G2
2998 ENUMX
2999   BFD_RELOC_ARM_LDR_SB_G0
3000 ENUMX
3001   BFD_RELOC_ARM_LDR_SB_G1
3002 ENUMX
3003   BFD_RELOC_ARM_LDR_SB_G2
3004 ENUMX
3005   BFD_RELOC_ARM_LDRS_SB_G0
3006 ENUMX
3007   BFD_RELOC_ARM_LDRS_SB_G1
3008 ENUMX
3009   BFD_RELOC_ARM_LDRS_SB_G2
3010 ENUMX
3011   BFD_RELOC_ARM_LDC_SB_G0
3012 ENUMX
3013   BFD_RELOC_ARM_LDC_SB_G1
3014 ENUMX
3015   BFD_RELOC_ARM_LDC_SB_G2
3016 ENUMDOC
3017   ARM group relocations.
3018
3019 ENUM
3020   BFD_RELOC_ARM_V4BX
3021 ENUMDOC
3022   Annotation of BX instructions.
3023
3024 ENUM
3025   BFD_RELOC_ARM_IMMEDIATE
3026 ENUMX
3027   BFD_RELOC_ARM_ADRL_IMMEDIATE
3028 ENUMX
3029   BFD_RELOC_ARM_T32_IMMEDIATE
3030 ENUMX
3031   BFD_RELOC_ARM_T32_ADD_IMM
3032 ENUMX
3033   BFD_RELOC_ARM_T32_IMM12
3034 ENUMX
3035   BFD_RELOC_ARM_T32_ADD_PC12
3036 ENUMX
3037   BFD_RELOC_ARM_SHIFT_IMM
3038 ENUMX
3039   BFD_RELOC_ARM_SMC
3040 ENUMX
3041   BFD_RELOC_ARM_SWI
3042 ENUMX
3043   BFD_RELOC_ARM_MULTI
3044 ENUMX
3045   BFD_RELOC_ARM_CP_OFF_IMM
3046 ENUMX
3047   BFD_RELOC_ARM_CP_OFF_IMM_S2
3048 ENUMX
3049   BFD_RELOC_ARM_T32_CP_OFF_IMM
3050 ENUMX
3051   BFD_RELOC_ARM_T32_CP_OFF_IMM_S2
3052 ENUMX
3053   BFD_RELOC_ARM_ADR_IMM
3054 ENUMX
3055   BFD_RELOC_ARM_LDR_IMM
3056 ENUMX
3057   BFD_RELOC_ARM_LITERAL
3058 ENUMX
3059   BFD_RELOC_ARM_IN_POOL
3060 ENUMX
3061   BFD_RELOC_ARM_OFFSET_IMM8
3062 ENUMX
3063   BFD_RELOC_ARM_T32_OFFSET_U8
3064 ENUMX
3065   BFD_RELOC_ARM_T32_OFFSET_IMM
3066 ENUMX
3067   BFD_RELOC_ARM_HWLITERAL
3068 ENUMX
3069   BFD_RELOC_ARM_THUMB_ADD
3070 ENUMX
3071   BFD_RELOC_ARM_THUMB_IMM
3072 ENUMX
3073   BFD_RELOC_ARM_THUMB_SHIFT
3074 ENUMDOC
3075   These relocs are only used within the ARM assembler.  They are not
3076   (at present) written to any object files.
3077
3078 ENUM
3079   BFD_RELOC_SH_PCDISP8BY2
3080 ENUMX
3081   BFD_RELOC_SH_PCDISP12BY2
3082 ENUMX
3083   BFD_RELOC_SH_IMM3
3084 ENUMX
3085   BFD_RELOC_SH_IMM3U
3086 ENUMX
3087   BFD_RELOC_SH_DISP12
3088 ENUMX
3089   BFD_RELOC_SH_DISP12BY2
3090 ENUMX
3091   BFD_RELOC_SH_DISP12BY4
3092 ENUMX
3093   BFD_RELOC_SH_DISP12BY8
3094 ENUMX
3095   BFD_RELOC_SH_DISP20
3096 ENUMX
3097   BFD_RELOC_SH_DISP20BY8
3098 ENUMX
3099   BFD_RELOC_SH_IMM4
3100 ENUMX
3101   BFD_RELOC_SH_IMM4BY2
3102 ENUMX
3103   BFD_RELOC_SH_IMM4BY4
3104 ENUMX
3105   BFD_RELOC_SH_IMM8
3106 ENUMX
3107   BFD_RELOC_SH_IMM8BY2
3108 ENUMX
3109   BFD_RELOC_SH_IMM8BY4
3110 ENUMX
3111   BFD_RELOC_SH_PCRELIMM8BY2
3112 ENUMX
3113   BFD_RELOC_SH_PCRELIMM8BY4
3114 ENUMX
3115   BFD_RELOC_SH_SWITCH16
3116 ENUMX
3117   BFD_RELOC_SH_SWITCH32
3118 ENUMX
3119   BFD_RELOC_SH_USES
3120 ENUMX
3121   BFD_RELOC_SH_COUNT
3122 ENUMX
3123   BFD_RELOC_SH_ALIGN
3124 ENUMX
3125   BFD_RELOC_SH_CODE
3126 ENUMX
3127   BFD_RELOC_SH_DATA
3128 ENUMX
3129   BFD_RELOC_SH_LABEL
3130 ENUMX
3131   BFD_RELOC_SH_LOOP_START
3132 ENUMX
3133   BFD_RELOC_SH_LOOP_END
3134 ENUMX
3135   BFD_RELOC_SH_COPY
3136 ENUMX
3137   BFD_RELOC_SH_GLOB_DAT
3138 ENUMX
3139   BFD_RELOC_SH_JMP_SLOT
3140 ENUMX
3141   BFD_RELOC_SH_RELATIVE
3142 ENUMX
3143   BFD_RELOC_SH_GOTPC
3144 ENUMX
3145   BFD_RELOC_SH_GOT_LOW16
3146 ENUMX
3147   BFD_RELOC_SH_GOT_MEDLOW16
3148 ENUMX
3149   BFD_RELOC_SH_GOT_MEDHI16
3150 ENUMX
3151   BFD_RELOC_SH_GOT_HI16
3152 ENUMX
3153   BFD_RELOC_SH_GOTPLT_LOW16
3154 ENUMX
3155   BFD_RELOC_SH_GOTPLT_MEDLOW16
3156 ENUMX
3157   BFD_RELOC_SH_GOTPLT_MEDHI16
3158 ENUMX
3159   BFD_RELOC_SH_GOTPLT_HI16
3160 ENUMX
3161   BFD_RELOC_SH_PLT_LOW16
3162 ENUMX
3163   BFD_RELOC_SH_PLT_MEDLOW16
3164 ENUMX
3165   BFD_RELOC_SH_PLT_MEDHI16
3166 ENUMX
3167   BFD_RELOC_SH_PLT_HI16
3168 ENUMX
3169   BFD_RELOC_SH_GOTOFF_LOW16
3170 ENUMX
3171   BFD_RELOC_SH_GOTOFF_MEDLOW16
3172 ENUMX
3173   BFD_RELOC_SH_GOTOFF_MEDHI16
3174 ENUMX
3175   BFD_RELOC_SH_GOTOFF_HI16
3176 ENUMX
3177   BFD_RELOC_SH_GOTPC_LOW16
3178 ENUMX
3179   BFD_RELOC_SH_GOTPC_MEDLOW16
3180 ENUMX
3181   BFD_RELOC_SH_GOTPC_MEDHI16
3182 ENUMX
3183   BFD_RELOC_SH_GOTPC_HI16
3184 ENUMX
3185   BFD_RELOC_SH_COPY64
3186 ENUMX
3187   BFD_RELOC_SH_GLOB_DAT64
3188 ENUMX
3189   BFD_RELOC_SH_JMP_SLOT64
3190 ENUMX
3191   BFD_RELOC_SH_RELATIVE64
3192 ENUMX
3193   BFD_RELOC_SH_GOT10BY4
3194 ENUMX
3195   BFD_RELOC_SH_GOT10BY8
3196 ENUMX
3197   BFD_RELOC_SH_GOTPLT10BY4
3198 ENUMX
3199   BFD_RELOC_SH_GOTPLT10BY8
3200 ENUMX
3201   BFD_RELOC_SH_GOTPLT32
3202 ENUMX
3203   BFD_RELOC_SH_SHMEDIA_CODE
3204 ENUMX
3205   BFD_RELOC_SH_IMMU5
3206 ENUMX
3207   BFD_RELOC_SH_IMMS6
3208 ENUMX
3209   BFD_RELOC_SH_IMMS6BY32
3210 ENUMX
3211   BFD_RELOC_SH_IMMU6
3212 ENUMX
3213   BFD_RELOC_SH_IMMS10
3214 ENUMX
3215   BFD_RELOC_SH_IMMS10BY2
3216 ENUMX
3217   BFD_RELOC_SH_IMMS10BY4
3218 ENUMX
3219   BFD_RELOC_SH_IMMS10BY8
3220 ENUMX
3221   BFD_RELOC_SH_IMMS16
3222 ENUMX
3223   BFD_RELOC_SH_IMMU16
3224 ENUMX
3225   BFD_RELOC_SH_IMM_LOW16
3226 ENUMX
3227   BFD_RELOC_SH_IMM_LOW16_PCREL
3228 ENUMX
3229   BFD_RELOC_SH_IMM_MEDLOW16
3230 ENUMX
3231   BFD_RELOC_SH_IMM_MEDLOW16_PCREL
3232 ENUMX
3233   BFD_RELOC_SH_IMM_MEDHI16
3234 ENUMX
3235   BFD_RELOC_SH_IMM_MEDHI16_PCREL
3236 ENUMX
3237   BFD_RELOC_SH_IMM_HI16
3238 ENUMX
3239   BFD_RELOC_SH_IMM_HI16_PCREL
3240 ENUMX
3241   BFD_RELOC_SH_PT_16
3242 ENUMX
3243   BFD_RELOC_SH_TLS_GD_32
3244 ENUMX
3245   BFD_RELOC_SH_TLS_LD_32
3246 ENUMX
3247   BFD_RELOC_SH_TLS_LDO_32
3248 ENUMX
3249   BFD_RELOC_SH_TLS_IE_32
3250 ENUMX
3251   BFD_RELOC_SH_TLS_LE_32
3252 ENUMX
3253   BFD_RELOC_SH_TLS_DTPMOD32
3254 ENUMX
3255   BFD_RELOC_SH_TLS_DTPOFF32
3256 ENUMX
3257   BFD_RELOC_SH_TLS_TPOFF32
3258 ENUMX
3259   BFD_RELOC_SH_GOT20
3260 ENUMX
3261   BFD_RELOC_SH_GOTOFF20
3262 ENUMX
3263   BFD_RELOC_SH_GOTFUNCDESC
3264 ENUMX
3265   BFD_RELOC_SH_GOTFUNCDESC20
3266 ENUMX
3267   BFD_RELOC_SH_GOTOFFFUNCDESC
3268 ENUMX
3269   BFD_RELOC_SH_GOTOFFFUNCDESC20
3270 ENUMX
3271   BFD_RELOC_SH_FUNCDESC
3272 ENUMDOC
3273   Renesas / SuperH SH relocs.  Not all of these appear in object files.
3274
3275 ENUM
3276   BFD_RELOC_ARC_B22_PCREL
3277 ENUMDOC
3278   ARC Cores relocs.
3279   ARC 22 bit pc-relative branch.  The lowest two bits must be zero and are
3280   not stored in the instruction.  The high 20 bits are installed in bits 26
3281   through 7 of the instruction.
3282 ENUM
3283   BFD_RELOC_ARC_B26
3284 ENUMDOC
3285   ARC 26 bit absolute branch.  The lowest two bits must be zero and are not
3286   stored in the instruction.  The high 24 bits are installed in bits 23
3287   through 0.
3288
3289 ENUM
3290   BFD_RELOC_BFIN_16_IMM
3291 ENUMDOC
3292   ADI Blackfin 16 bit immediate absolute reloc.
3293 ENUM
3294   BFD_RELOC_BFIN_16_HIGH
3295 ENUMDOC
3296   ADI Blackfin 16 bit immediate absolute reloc higher 16 bits.
3297 ENUM
3298   BFD_RELOC_BFIN_4_PCREL
3299 ENUMDOC
3300   ADI Blackfin 'a' part of LSETUP.
3301 ENUM
3302   BFD_RELOC_BFIN_5_PCREL
3303 ENUMDOC
3304   ADI Blackfin.
3305 ENUM
3306   BFD_RELOC_BFIN_16_LOW
3307 ENUMDOC
3308   ADI Blackfin 16 bit immediate absolute reloc lower 16 bits.
3309 ENUM
3310   BFD_RELOC_BFIN_10_PCREL
3311 ENUMDOC
3312   ADI Blackfin.
3313 ENUM
3314   BFD_RELOC_BFIN_11_PCREL
3315 ENUMDOC
3316   ADI Blackfin 'b' part of LSETUP.
3317 ENUM
3318   BFD_RELOC_BFIN_12_PCREL_JUMP
3319 ENUMDOC
3320   ADI Blackfin.
3321 ENUM
3322   BFD_RELOC_BFIN_12_PCREL_JUMP_S
3323 ENUMDOC
3324   ADI Blackfin Short jump, pcrel.
3325 ENUM
3326   BFD_RELOC_BFIN_24_PCREL_CALL_X
3327 ENUMDOC
3328   ADI Blackfin Call.x not implemented.
3329 ENUM
3330   BFD_RELOC_BFIN_24_PCREL_JUMP_L
3331 ENUMDOC
3332   ADI Blackfin Long Jump pcrel.
3333 ENUM
3334   BFD_RELOC_BFIN_GOT17M4
3335 ENUMX
3336   BFD_RELOC_BFIN_GOTHI
3337 ENUMX
3338   BFD_RELOC_BFIN_GOTLO
3339 ENUMX
3340   BFD_RELOC_BFIN_FUNCDESC
3341 ENUMX
3342   BFD_RELOC_BFIN_FUNCDESC_GOT17M4
3343 ENUMX
3344   BFD_RELOC_BFIN_FUNCDESC_GOTHI
3345 ENUMX
3346   BFD_RELOC_BFIN_FUNCDESC_GOTLO
3347 ENUMX
3348   BFD_RELOC_BFIN_FUNCDESC_VALUE
3349 ENUMX
3350   BFD_RELOC_BFIN_FUNCDESC_GOTOFF17M4
3351 ENUMX
3352   BFD_RELOC_BFIN_FUNCDESC_GOTOFFHI
3353 ENUMX
3354   BFD_RELOC_BFIN_FUNCDESC_GOTOFFLO
3355 ENUMX
3356   BFD_RELOC_BFIN_GOTOFF17M4
3357 ENUMX
3358   BFD_RELOC_BFIN_GOTOFFHI
3359 ENUMX
3360   BFD_RELOC_BFIN_GOTOFFLO
3361 ENUMDOC
3362   ADI Blackfin FD-PIC relocations.
3363 ENUM
3364   BFD_RELOC_BFIN_GOT
3365 ENUMDOC
3366   ADI Blackfin GOT relocation.
3367 ENUM
3368   BFD_RELOC_BFIN_PLTPC
3369 ENUMDOC
3370   ADI Blackfin PLTPC relocation.
3371 ENUM
3372   BFD_ARELOC_BFIN_PUSH
3373 ENUMDOC
3374   ADI Blackfin arithmetic relocation.
3375 ENUM
3376   BFD_ARELOC_BFIN_CONST
3377 ENUMDOC
3378   ADI Blackfin arithmetic relocation.
3379 ENUM
3380   BFD_ARELOC_BFIN_ADD
3381 ENUMDOC
3382   ADI Blackfin arithmetic relocation.
3383 ENUM
3384   BFD_ARELOC_BFIN_SUB
3385 ENUMDOC
3386   ADI Blackfin arithmetic relocation.
3387 ENUM
3388   BFD_ARELOC_BFIN_MULT
3389 ENUMDOC
3390   ADI Blackfin arithmetic relocation.
3391 ENUM
3392   BFD_ARELOC_BFIN_DIV
3393 ENUMDOC
3394   ADI Blackfin arithmetic relocation.
3395 ENUM
3396   BFD_ARELOC_BFIN_MOD
3397 ENUMDOC
3398   ADI Blackfin arithmetic relocation.
3399 ENUM
3400   BFD_ARELOC_BFIN_LSHIFT
3401 ENUMDOC
3402   ADI Blackfin arithmetic relocation.
3403 ENUM
3404   BFD_ARELOC_BFIN_RSHIFT
3405 ENUMDOC
3406   ADI Blackfin arithmetic relocation.
3407 ENUM
3408   BFD_ARELOC_BFIN_AND
3409 ENUMDOC
3410   ADI Blackfin arithmetic relocation.
3411 ENUM
3412   BFD_ARELOC_BFIN_OR
3413 ENUMDOC
3414   ADI Blackfin arithmetic relocation.
3415 ENUM
3416   BFD_ARELOC_BFIN_XOR
3417 ENUMDOC
3418   ADI Blackfin arithmetic relocation.
3419 ENUM
3420   BFD_ARELOC_BFIN_LAND
3421 ENUMDOC
3422   ADI Blackfin arithmetic relocation.
3423 ENUM
3424   BFD_ARELOC_BFIN_LOR
3425 ENUMDOC
3426   ADI Blackfin arithmetic relocation.
3427 ENUM
3428   BFD_ARELOC_BFIN_LEN
3429 ENUMDOC
3430   ADI Blackfin arithmetic relocation.
3431 ENUM
3432   BFD_ARELOC_BFIN_NEG
3433 ENUMDOC
3434   ADI Blackfin arithmetic relocation.
3435 ENUM
3436   BFD_ARELOC_BFIN_COMP
3437 ENUMDOC
3438   ADI Blackfin arithmetic relocation.
3439 ENUM
3440   BFD_ARELOC_BFIN_PAGE
3441 ENUMDOC
3442   ADI Blackfin arithmetic relocation.
3443 ENUM
3444   BFD_ARELOC_BFIN_HWPAGE
3445 ENUMDOC
3446   ADI Blackfin arithmetic relocation.
3447 ENUM
3448   BFD_ARELOC_BFIN_ADDR
3449 ENUMDOC
3450   ADI Blackfin arithmetic relocation.
3451
3452 ENUM
3453   BFD_RELOC_D10V_10_PCREL_R
3454 ENUMDOC
3455   Mitsubishi D10V relocs.
3456   This is a 10-bit reloc with the right 2 bits
3457   assumed to be 0.
3458 ENUM
3459   BFD_RELOC_D10V_10_PCREL_L
3460 ENUMDOC
3461   Mitsubishi D10V relocs.
3462   This is a 10-bit reloc with the right 2 bits
3463   assumed to be 0.  This is the same as the previous reloc
3464   except it is in the left container, i.e.,
3465   shifted left 15 bits.
3466 ENUM
3467   BFD_RELOC_D10V_18
3468 ENUMDOC
3469   This is an 18-bit reloc with the right 2 bits
3470   assumed to be 0.
3471 ENUM
3472   BFD_RELOC_D10V_18_PCREL
3473 ENUMDOC
3474   This is an 18-bit reloc with the right 2 bits
3475   assumed to be 0.
3476
3477 ENUM
3478   BFD_RELOC_D30V_6
3479 ENUMDOC
3480   Mitsubishi D30V relocs.
3481   This is a 6-bit absolute reloc.
3482 ENUM
3483   BFD_RELOC_D30V_9_PCREL
3484 ENUMDOC
3485   This is a 6-bit pc-relative reloc with
3486   the right 3 bits assumed to be 0.
3487 ENUM
3488   BFD_RELOC_D30V_9_PCREL_R
3489 ENUMDOC
3490   This is a 6-bit pc-relative reloc with
3491   the right 3 bits assumed to be 0. Same
3492   as the previous reloc but on the right side
3493   of the container.
3494 ENUM
3495   BFD_RELOC_D30V_15
3496 ENUMDOC
3497   This is a 12-bit absolute reloc with the
3498   right 3 bitsassumed to be 0.
3499 ENUM
3500   BFD_RELOC_D30V_15_PCREL
3501 ENUMDOC
3502   This is a 12-bit pc-relative reloc with
3503   the right 3 bits assumed to be 0.
3504 ENUM
3505   BFD_RELOC_D30V_15_PCREL_R
3506 ENUMDOC
3507   This is a 12-bit pc-relative reloc with
3508   the right 3 bits assumed to be 0. Same
3509   as the previous reloc but on the right side
3510   of the container.
3511 ENUM
3512   BFD_RELOC_D30V_21
3513 ENUMDOC
3514   This is an 18-bit absolute reloc with
3515   the right 3 bits assumed to be 0.
3516 ENUM
3517   BFD_RELOC_D30V_21_PCREL
3518 ENUMDOC
3519   This is an 18-bit pc-relative reloc with
3520   the right 3 bits assumed to be 0.
3521 ENUM
3522   BFD_RELOC_D30V_21_PCREL_R
3523 ENUMDOC
3524   This is an 18-bit pc-relative reloc with
3525   the right 3 bits assumed to be 0. Same
3526   as the previous reloc but on the right side
3527   of the container.
3528 ENUM
3529   BFD_RELOC_D30V_32
3530 ENUMDOC
3531   This is a 32-bit absolute reloc.
3532 ENUM
3533   BFD_RELOC_D30V_32_PCREL
3534 ENUMDOC
3535   This is a 32-bit pc-relative reloc.
3536
3537 ENUM
3538   BFD_RELOC_DLX_HI16_S
3539 ENUMDOC
3540   DLX relocs
3541 ENUM
3542   BFD_RELOC_DLX_LO16
3543 ENUMDOC
3544   DLX relocs
3545 ENUM
3546   BFD_RELOC_DLX_JMP26
3547 ENUMDOC
3548   DLX relocs
3549
3550 ENUM
3551   BFD_RELOC_M32C_HI8
3552 ENUMX
3553   BFD_RELOC_M32C_RL_JUMP
3554 ENUMX
3555   BFD_RELOC_M32C_RL_1ADDR
3556 ENUMX
3557   BFD_RELOC_M32C_RL_2ADDR
3558 ENUMDOC
3559   Renesas M16C/M32C Relocations.
3560
3561 ENUM
3562   BFD_RELOC_M32R_24
3563 ENUMDOC
3564   Renesas M32R (formerly Mitsubishi M32R) relocs.
3565   This is a 24 bit absolute address.
3566 ENUM
3567   BFD_RELOC_M32R_10_PCREL
3568 ENUMDOC
3569   This is a 10-bit pc-relative reloc with the right 2 bits assumed to be 0.
3570 ENUM
3571   BFD_RELOC_M32R_18_PCREL
3572 ENUMDOC
3573   This is an 18-bit reloc with the right 2 bits assumed to be 0.
3574 ENUM
3575   BFD_RELOC_M32R_26_PCREL
3576 ENUMDOC
3577   This is a 26-bit reloc with the right 2 bits assumed to be 0.
3578 ENUM
3579   BFD_RELOC_M32R_HI16_ULO
3580 ENUMDOC
3581   This is a 16-bit reloc containing the high 16 bits of an address
3582   used when the lower 16 bits are treated as unsigned.
3583 ENUM
3584   BFD_RELOC_M32R_HI16_SLO
3585 ENUMDOC
3586   This is a 16-bit reloc containing the high 16 bits of an address
3587   used when the lower 16 bits are treated as signed.
3588 ENUM
3589   BFD_RELOC_M32R_LO16
3590 ENUMDOC
3591   This is a 16-bit reloc containing the lower 16 bits of an address.
3592 ENUM
3593   BFD_RELOC_M32R_SDA16
3594 ENUMDOC
3595   This is a 16-bit reloc containing the small data area offset for use in
3596   add3, load, and store instructions.
3597 ENUM
3598   BFD_RELOC_M32R_GOT24
3599 ENUMX
3600   BFD_RELOC_M32R_26_PLTREL
3601 ENUMX
3602   BFD_RELOC_M32R_COPY
3603 ENUMX
3604   BFD_RELOC_M32R_GLOB_DAT
3605 ENUMX
3606   BFD_RELOC_M32R_JMP_SLOT
3607 ENUMX
3608   BFD_RELOC_M32R_RELATIVE
3609 ENUMX
3610   BFD_RELOC_M32R_GOTOFF
3611 ENUMX
3612   BFD_RELOC_M32R_GOTOFF_HI_ULO
3613 ENUMX
3614   BFD_RELOC_M32R_GOTOFF_HI_SLO
3615 ENUMX
3616   BFD_RELOC_M32R_GOTOFF_LO
3617 ENUMX
3618   BFD_RELOC_M32R_GOTPC24
3619 ENUMX
3620   BFD_RELOC_M32R_GOT16_HI_ULO
3621 ENUMX
3622   BFD_RELOC_M32R_GOT16_HI_SLO
3623 ENUMX
3624   BFD_RELOC_M32R_GOT16_LO
3625 ENUMX
3626   BFD_RELOC_M32R_GOTPC_HI_ULO
3627 ENUMX
3628   BFD_RELOC_M32R_GOTPC_HI_SLO
3629 ENUMX
3630   BFD_RELOC_M32R_GOTPC_LO
3631 ENUMDOC
3632   For PIC.
3633
3634
3635 ENUM
3636   BFD_RELOC_V850_9_PCREL
3637 ENUMDOC
3638   This is a 9-bit reloc
3639 ENUM
3640   BFD_RELOC_V850_22_PCREL
3641 ENUMDOC
3642   This is a 22-bit reloc
3643
3644 ENUM
3645   BFD_RELOC_V850_SDA_16_16_OFFSET
3646 ENUMDOC
3647   This is a 16 bit offset from the short data area pointer.
3648 ENUM
3649   BFD_RELOC_V850_SDA_15_16_OFFSET
3650 ENUMDOC
3651   This is a 16 bit offset (of which only 15 bits are used) from the
3652   short data area pointer.
3653 ENUM
3654   BFD_RELOC_V850_ZDA_16_16_OFFSET
3655 ENUMDOC
3656   This is a 16 bit offset from the zero data area pointer.
3657 ENUM
3658   BFD_RELOC_V850_ZDA_15_16_OFFSET
3659 ENUMDOC
3660   This is a 16 bit offset (of which only 15 bits are used) from the
3661   zero data area pointer.
3662 ENUM
3663   BFD_RELOC_V850_TDA_6_8_OFFSET
3664 ENUMDOC
3665   This is an 8 bit offset (of which only 6 bits are used) from the
3666   tiny data area pointer.
3667 ENUM
3668   BFD_RELOC_V850_TDA_7_8_OFFSET
3669 ENUMDOC
3670   This is an 8bit offset (of which only 7 bits are used) from the tiny
3671   data area pointer.
3672 ENUM
3673   BFD_RELOC_V850_TDA_7_7_OFFSET
3674 ENUMDOC
3675   This is a 7 bit offset from the tiny data area pointer.
3676 ENUM
3677   BFD_RELOC_V850_TDA_16_16_OFFSET
3678 ENUMDOC
3679   This is a 16 bit offset from the tiny data area pointer.
3680 COMMENT
3681 ENUM
3682   BFD_RELOC_V850_TDA_4_5_OFFSET
3683 ENUMDOC
3684   This is a 5 bit offset (of which only 4 bits are used) from the tiny
3685   data area pointer.
3686 ENUM
3687   BFD_RELOC_V850_TDA_4_4_OFFSET
3688 ENUMDOC
3689   This is a 4 bit offset from the tiny data area pointer.
3690 ENUM
3691   BFD_RELOC_V850_SDA_16_16_SPLIT_OFFSET
3692 ENUMDOC
3693   This is a 16 bit offset from the short data area pointer, with the
3694   bits placed non-contiguously in the instruction.
3695 ENUM
3696   BFD_RELOC_V850_ZDA_16_16_SPLIT_OFFSET
3697 ENUMDOC
3698   This is a 16 bit offset from the zero data area pointer, with the
3699   bits placed non-contiguously in the instruction.
3700 ENUM
3701   BFD_RELOC_V850_CALLT_6_7_OFFSET
3702 ENUMDOC
3703   This is a 6 bit offset from the call table base pointer.
3704 ENUM
3705   BFD_RELOC_V850_CALLT_16_16_OFFSET
3706 ENUMDOC
3707   This is a 16 bit offset from the call table base pointer.
3708 ENUM
3709   BFD_RELOC_V850_LONGCALL
3710 ENUMDOC
3711   Used for relaxing indirect function calls.
3712 ENUM
3713   BFD_RELOC_V850_LONGJUMP
3714 ENUMDOC
3715   Used for relaxing indirect jumps.
3716 ENUM
3717   BFD_RELOC_V850_ALIGN
3718 ENUMDOC
3719   Used to maintain alignment whilst relaxing.
3720 ENUM
3721   BFD_RELOC_V850_LO16_SPLIT_OFFSET
3722 ENUMDOC
3723   This is a variation of BFD_RELOC_LO16 that can be used in v850e ld.bu
3724   instructions.
3725 ENUM
3726   BFD_RELOC_V850_16_PCREL
3727 ENUMDOC
3728   This is a 16-bit reloc.
3729 ENUM
3730   BFD_RELOC_V850_17_PCREL
3731 ENUMDOC
3732   This is a 17-bit reloc.
3733 ENUM
3734   BFD_RELOC_V850_23
3735 ENUMDOC
3736   This is a 23-bit reloc.
3737 ENUM
3738   BFD_RELOC_V850_32_PCREL
3739 ENUMDOC
3740   This is a 32-bit reloc.
3741 ENUM
3742   BFD_RELOC_V850_32_ABS
3743 ENUMDOC
3744   This is a 32-bit reloc.
3745 ENUM
3746   BFD_RELOC_V850_16_SPLIT_OFFSET
3747 ENUMDOC
3748   This is a 16-bit reloc.
3749 ENUM
3750   BFD_RELOC_V850_16_S1
3751 ENUMDOC
3752   This is a 16-bit reloc.
3753 ENUM
3754   BFD_RELOC_V850_LO16_S1
3755 ENUMDOC
3756   Low 16 bits. 16 bit shifted by 1.
3757 ENUM
3758   BFD_RELOC_V850_CALLT_15_16_OFFSET
3759 ENUMDOC
3760   This is a 16 bit offset from the call table base pointer.
3761 ENUM
3762   BFD_RELOC_V850_32_GOTPCREL
3763 ENUMDOC
3764   DSO relocations.
3765 ENUM
3766   BFD_RELOC_V850_16_GOT
3767 ENUMDOC
3768   DSO relocations.
3769 ENUM
3770   BFD_RELOC_V850_32_GOT
3771 ENUMDOC
3772   DSO relocations.
3773 ENUM
3774   BFD_RELOC_V850_22_PLT_PCREL
3775 ENUMDOC
3776   DSO relocations.
3777 ENUM
3778   BFD_RELOC_V850_32_PLT_PCREL
3779 ENUMDOC
3780   DSO relocations.
3781 ENUM
3782   BFD_RELOC_V850_COPY
3783 ENUMDOC
3784   DSO relocations.
3785 ENUM
3786   BFD_RELOC_V850_GLOB_DAT
3787 ENUMDOC
3788   DSO relocations.
3789 ENUM
3790   BFD_RELOC_V850_JMP_SLOT
3791 ENUMDOC
3792   DSO relocations.
3793 ENUM
3794   BFD_RELOC_V850_RELATIVE
3795 ENUMDOC
3796   DSO relocations.
3797 ENUM
3798   BFD_RELOC_V850_16_GOTOFF
3799 ENUMDOC
3800   DSO relocations.
3801 ENUM
3802   BFD_RELOC_V850_32_GOTOFF
3803 ENUMDOC
3804   DSO relocations.
3805 ENUM
3806   BFD_RELOC_V850_CODE
3807 ENUMDOC
3808   start code.
3809 ENUM
3810   BFD_RELOC_V850_DATA
3811 ENUMDOC
3812   start data in text.
3813 ENUM
3814   BFD_RELOC_MN10300_32_PCREL
3815 ENUMDOC
3816   This is a 32bit pcrel reloc for the mn10300, offset by two bytes in the
3817   instruction.
3818 ENUM
3819   BFD_RELOC_MN10300_16_PCREL
3820 ENUMDOC
3821   This is a 16bit pcrel reloc for the mn10300, offset by two bytes in the
3822   instruction.
3823
3824 ENUM
3825   BFD_RELOC_TIC30_LDP
3826 ENUMDOC
3827   This is a 8bit DP reloc for the tms320c30, where the most
3828   significant 8 bits of a 24 bit word are placed into the least
3829   significant 8 bits of the opcode.
3830
3831 ENUM
3832   BFD_RELOC_TIC54X_PARTLS7
3833 ENUMDOC
3834   This is a 7bit reloc for the tms320c54x, where the least
3835   significant 7 bits of a 16 bit word are placed into the least
3836   significant 7 bits of the opcode.
3837
3838 ENUM
3839   BFD_RELOC_TIC54X_PARTMS9
3840 ENUMDOC
3841   This is a 9bit DP reloc for the tms320c54x, where the most
3842   significant 9 bits of a 16 bit word are placed into the least
3843   significant 9 bits of the opcode.
3844
3845 ENUM
3846   BFD_RELOC_TIC54X_23
3847 ENUMDOC
3848   This is an extended address 23-bit reloc for the tms320c54x.
3849
3850 ENUM
3851   BFD_RELOC_TIC54X_16_OF_23
3852 ENUMDOC
3853   This is a 16-bit reloc for the tms320c54x, where the least
3854   significant 16 bits of a 23-bit extended address are placed into
3855   the opcode.
3856
3857 ENUM
3858   BFD_RELOC_TIC54X_MS7_OF_23
3859 ENUMDOC
3860   This is a reloc for the tms320c54x, where the most
3861   significant 7 bits of a 23-bit extended address are placed into
3862   the opcode.
3863
3864 ENUM
3865   BFD_RELOC_C6000_PCR_S21
3866 ENUMX
3867   BFD_RELOC_C6000_PCR_S12
3868 ENUMX
3869   BFD_RELOC_C6000_PCR_S10
3870 ENUMX
3871   BFD_RELOC_C6000_PCR_S7
3872 ENUMX
3873   BFD_RELOC_C6000_ABS_S16
3874 ENUMX
3875   BFD_RELOC_C6000_ABS_L16
3876 ENUMX
3877   BFD_RELOC_C6000_ABS_H16
3878 ENUMX
3879   BFD_RELOC_C6000_SBR_U15_B
3880 ENUMX
3881   BFD_RELOC_C6000_SBR_U15_H
3882 ENUMX
3883   BFD_RELOC_C6000_SBR_U15_W
3884 ENUMX
3885   BFD_RELOC_C6000_SBR_S16
3886 ENUMX
3887   BFD_RELOC_C6000_SBR_L16_B
3888 ENUMX
3889   BFD_RELOC_C6000_SBR_L16_H
3890 ENUMX
3891   BFD_RELOC_C6000_SBR_L16_W
3892 ENUMX
3893   BFD_RELOC_C6000_SBR_H16_B
3894 ENUMX
3895   BFD_RELOC_C6000_SBR_H16_H
3896 ENUMX
3897   BFD_RELOC_C6000_SBR_H16_W
3898 ENUMX
3899   BFD_RELOC_C6000_SBR_GOT_U15_W
3900 ENUMX
3901   BFD_RELOC_C6000_SBR_GOT_L16_W
3902 ENUMX
3903   BFD_RELOC_C6000_SBR_GOT_H16_W
3904 ENUMX
3905   BFD_RELOC_C6000_DSBT_INDEX
3906 ENUMX
3907   BFD_RELOC_C6000_PREL31
3908 ENUMX
3909   BFD_RELOC_C6000_COPY
3910 ENUMX
3911   BFD_RELOC_C6000_ALIGN
3912 ENUMX
3913   BFD_RELOC_C6000_FPHEAD
3914 ENUMX
3915   BFD_RELOC_C6000_NOCMP
3916 ENUMDOC
3917   TMS320C6000 relocations.
3918
3919 ENUM
3920   BFD_RELOC_FR30_48
3921 ENUMDOC
3922   This is a 48 bit reloc for the FR30 that stores 32 bits.
3923 ENUM
3924   BFD_RELOC_FR30_20
3925 ENUMDOC
3926   This is a 32 bit reloc for the FR30 that stores 20 bits split up into
3927   two sections.
3928 ENUM
3929   BFD_RELOC_FR30_6_IN_4
3930 ENUMDOC
3931   This is a 16 bit reloc for the FR30 that stores a 6 bit word offset in
3932   4 bits.
3933 ENUM
3934   BFD_RELOC_FR30_8_IN_8
3935 ENUMDOC
3936   This is a 16 bit reloc for the FR30 that stores an 8 bit byte offset
3937   into 8 bits.
3938 ENUM
3939   BFD_RELOC_FR30_9_IN_8
3940 ENUMDOC
3941   This is a 16 bit reloc for the FR30 that stores a 9 bit short offset
3942   into 8 bits.
3943 ENUM
3944   BFD_RELOC_FR30_10_IN_8
3945 ENUMDOC
3946   This is a 16 bit reloc for the FR30 that stores a 10 bit word offset
3947   into 8 bits.
3948 ENUM
3949   BFD_RELOC_FR30_9_PCREL
3950 ENUMDOC
3951   This is a 16 bit reloc for the FR30 that stores a 9 bit pc relative
3952   short offset into 8 bits.
3953 ENUM
3954   BFD_RELOC_FR30_12_PCREL
3955 ENUMDOC
3956   This is a 16 bit reloc for the FR30 that stores a 12 bit pc relative
3957   short offset into 11 bits.
3958
3959 ENUM
3960   BFD_RELOC_MCORE_PCREL_IMM8BY4
3961 ENUMX
3962   BFD_RELOC_MCORE_PCREL_IMM11BY2
3963 ENUMX
3964   BFD_RELOC_MCORE_PCREL_IMM4BY2
3965 ENUMX
3966   BFD_RELOC_MCORE_PCREL_32
3967 ENUMX
3968   BFD_RELOC_MCORE_PCREL_JSR_IMM11BY2
3969 ENUMX
3970   BFD_RELOC_MCORE_RVA
3971 ENUMDOC
3972   Motorola Mcore relocations.
3973
3974 ENUM
3975   BFD_RELOC_MEP_8
3976 ENUMX
3977   BFD_RELOC_MEP_16
3978 ENUMX
3979   BFD_RELOC_MEP_32
3980 ENUMX
3981   BFD_RELOC_MEP_PCREL8A2
3982 ENUMX
3983   BFD_RELOC_MEP_PCREL12A2
3984 ENUMX
3985   BFD_RELOC_MEP_PCREL17A2
3986 ENUMX
3987   BFD_RELOC_MEP_PCREL24A2
3988 ENUMX
3989   BFD_RELOC_MEP_PCABS24A2
3990 ENUMX
3991   BFD_RELOC_MEP_LOW16
3992 ENUMX
3993   BFD_RELOC_MEP_HI16U
3994 ENUMX
3995   BFD_RELOC_MEP_HI16S
3996 ENUMX
3997   BFD_RELOC_MEP_GPREL
3998 ENUMX
3999   BFD_RELOC_MEP_TPREL
4000 ENUMX
4001   BFD_RELOC_MEP_TPREL7
4002 ENUMX
4003   BFD_RELOC_MEP_TPREL7A2
4004 ENUMX
4005   BFD_RELOC_MEP_TPREL7A4
4006 ENUMX
4007   BFD_RELOC_MEP_UIMM24
4008 ENUMX
4009   BFD_RELOC_MEP_ADDR24A4
4010 ENUMX
4011   BFD_RELOC_MEP_GNU_VTINHERIT
4012 ENUMX
4013   BFD_RELOC_MEP_GNU_VTENTRY
4014 ENUMDOC
4015   Toshiba Media Processor Relocations.
4016 COMMENT
4017
4018 ENUM
4019   BFD_RELOC_MMIX_GETA
4020 ENUMX
4021   BFD_RELOC_MMIX_GETA_1
4022 ENUMX
4023   BFD_RELOC_MMIX_GETA_2
4024 ENUMX
4025   BFD_RELOC_MMIX_GETA_3
4026 ENUMDOC
4027   These are relocations for the GETA instruction.
4028 ENUM
4029   BFD_RELOC_MMIX_CBRANCH
4030 ENUMX
4031   BFD_RELOC_MMIX_CBRANCH_J
4032 ENUMX
4033   BFD_RELOC_MMIX_CBRANCH_1
4034 ENUMX
4035   BFD_RELOC_MMIX_CBRANCH_2
4036 ENUMX
4037   BFD_RELOC_MMIX_CBRANCH_3
4038 ENUMDOC
4039   These are relocations for a conditional branch instruction.
4040 ENUM
4041   BFD_RELOC_MMIX_PUSHJ
4042 ENUMX
4043   BFD_RELOC_MMIX_PUSHJ_1
4044 ENUMX
4045   BFD_RELOC_MMIX_PUSHJ_2
4046 ENUMX
4047   BFD_RELOC_MMIX_PUSHJ_3
4048 ENUMX
4049   BFD_RELOC_MMIX_PUSHJ_STUBBABLE
4050 ENUMDOC
4051   These are relocations for the PUSHJ instruction.
4052 ENUM
4053   BFD_RELOC_MMIX_JMP
4054 ENUMX
4055   BFD_RELOC_MMIX_JMP_1
4056 ENUMX
4057   BFD_RELOC_MMIX_JMP_2
4058 ENUMX
4059   BFD_RELOC_MMIX_JMP_3
4060 ENUMDOC
4061   These are relocations for the JMP instruction.
4062 ENUM
4063   BFD_RELOC_MMIX_ADDR19
4064 ENUMDOC
4065   This is a relocation for a relative address as in a GETA instruction or
4066   a branch.
4067 ENUM
4068   BFD_RELOC_MMIX_ADDR27
4069 ENUMDOC
4070   This is a relocation for a relative address as in a JMP instruction.
4071 ENUM
4072   BFD_RELOC_MMIX_REG_OR_BYTE
4073 ENUMDOC
4074   This is a relocation for an instruction field that may be a general
4075   register or a value 0..255.
4076 ENUM
4077   BFD_RELOC_MMIX_REG
4078 ENUMDOC
4079   This is a relocation for an instruction field that may be a general
4080   register.
4081 ENUM
4082   BFD_RELOC_MMIX_BASE_PLUS_OFFSET
4083 ENUMDOC
4084   This is a relocation for two instruction fields holding a register and
4085   an offset, the equivalent of the relocation.
4086 ENUM
4087   BFD_RELOC_MMIX_LOCAL
4088 ENUMDOC
4089   This relocation is an assertion that the expression is not allocated as
4090   a global register.  It does not modify contents.
4091
4092 ENUM
4093   BFD_RELOC_AVR_7_PCREL
4094 ENUMDOC
4095   This is a 16 bit reloc for the AVR that stores 8 bit pc relative
4096   short offset into 7 bits.
4097 ENUM
4098   BFD_RELOC_AVR_13_PCREL
4099 ENUMDOC
4100   This is a 16 bit reloc for the AVR that stores 13 bit pc relative
4101   short offset into 12 bits.
4102 ENUM
4103   BFD_RELOC_AVR_16_PM
4104 ENUMDOC
4105   This is a 16 bit reloc for the AVR that stores 17 bit value (usually
4106   program memory address) into 16 bits.
4107 ENUM
4108   BFD_RELOC_AVR_LO8_LDI
4109 ENUMDOC
4110   This is a 16 bit reloc for the AVR that stores 8 bit value (usually
4111   data memory address) into 8 bit immediate value of LDI insn.
4112 ENUM
4113   BFD_RELOC_AVR_HI8_LDI
4114 ENUMDOC
4115   This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit
4116   of data memory address) into 8 bit immediate value of LDI insn.
4117 ENUM
4118   BFD_RELOC_AVR_HH8_LDI
4119 ENUMDOC
4120   This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit
4121   of program memory address) into 8 bit immediate value of LDI insn.
4122 ENUM
4123   BFD_RELOC_AVR_MS8_LDI
4124 ENUMDOC
4125   This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit
4126   of 32 bit value) into 8 bit immediate value of LDI insn.
4127 ENUM
4128   BFD_RELOC_AVR_LO8_LDI_NEG
4129 ENUMDOC
4130   This is a 16 bit reloc for the AVR that stores negated 8 bit value
4131   (usually data memory address) into 8 bit immediate value of SUBI insn.
4132 ENUM
4133   BFD_RELOC_AVR_HI8_LDI_NEG
4134 ENUMDOC
4135   This is a 16 bit reloc for the AVR that stores negated 8 bit value
4136   (high 8 bit of data memory address) into 8 bit immediate value of
4137   SUBI insn.
4138 ENUM
4139   BFD_RELOC_AVR_HH8_LDI_NEG
4140 ENUMDOC
4141   This is a 16 bit reloc for the AVR that stores negated 8 bit value
4142   (most high 8 bit of program memory address) into 8 bit immediate value
4143   of LDI or SUBI insn.
4144 ENUM
4145   BFD_RELOC_AVR_MS8_LDI_NEG
4146 ENUMDOC
4147   This is a 16 bit reloc for the AVR that stores negated 8 bit value (msb
4148   of 32 bit value) into 8 bit immediate value of LDI insn.
4149 ENUM
4150   BFD_RELOC_AVR_LO8_LDI_PM
4151 ENUMDOC
4152   This is a 16 bit reloc for the AVR that stores 8 bit value (usually
4153   command address) into 8 bit immediate value of LDI insn.
4154 ENUM
4155   BFD_RELOC_AVR_LO8_LDI_GS
4156 ENUMDOC
4157   This is a 16 bit reloc for the AVR that stores 8 bit value
4158   (command address) into 8 bit immediate value of LDI insn. If the address
4159   is beyond the 128k boundary, the linker inserts a jump stub for this reloc
4160   in the lower 128k.
4161 ENUM
4162   BFD_RELOC_AVR_HI8_LDI_PM
4163 ENUMDOC
4164   This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit
4165   of command address) into 8 bit immediate value of LDI insn.
4166 ENUM
4167   BFD_RELOC_AVR_HI8_LDI_GS
4168 ENUMDOC
4169   This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit
4170   of command address) into 8 bit immediate value of LDI insn.  If the address
4171   is beyond the 128k boundary, the linker inserts a jump stub for this reloc
4172   below 128k.
4173 ENUM
4174   BFD_RELOC_AVR_HH8_LDI_PM
4175 ENUMDOC
4176   This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit
4177   of command address) into 8 bit immediate value of LDI insn.
4178 ENUM
4179   BFD_RELOC_AVR_LO8_LDI_PM_NEG
4180 ENUMDOC
4181   This is a 16 bit reloc for the AVR that stores negated 8 bit value
4182   (usually command address) into 8 bit immediate value of SUBI insn.
4183 ENUM
4184   BFD_RELOC_AVR_HI8_LDI_PM_NEG
4185 ENUMDOC
4186   This is a 16 bit reloc for the AVR that stores negated 8 bit value
4187   (high 8 bit of 16 bit command address) into 8 bit immediate value
4188   of SUBI insn.
4189 ENUM
4190   BFD_RELOC_AVR_HH8_LDI_PM_NEG
4191 ENUMDOC
4192   This is a 16 bit reloc for the AVR that stores negated 8 bit value
4193   (high 6 bit of 22 bit command address) into 8 bit immediate
4194   value of SUBI insn.
4195 ENUM
4196   BFD_RELOC_AVR_CALL
4197 ENUMDOC
4198   This is a 32 bit reloc for the AVR that stores 23 bit value
4199   into 22 bits.
4200 ENUM
4201   BFD_RELOC_AVR_LDI
4202 ENUMDOC
4203   This is a 16 bit reloc for the AVR that stores all needed bits
4204   for absolute addressing with ldi with overflow check to linktime
4205 ENUM
4206   BFD_RELOC_AVR_6
4207 ENUMDOC
4208   This is a 6 bit reloc for the AVR that stores offset for ldd/std
4209   instructions
4210 ENUM
4211   BFD_RELOC_AVR_6_ADIW
4212 ENUMDOC
4213   This is a 6 bit reloc for the AVR that stores offset for adiw/sbiw
4214   instructions
4215
4216 ENUM
4217   BFD_RELOC_RX_NEG8
4218 ENUMX
4219   BFD_RELOC_RX_NEG16
4220 ENUMX
4221   BFD_RELOC_RX_NEG24
4222 ENUMX
4223   BFD_RELOC_RX_NEG32
4224 ENUMX
4225   BFD_RELOC_RX_16_OP
4226 ENUMX
4227   BFD_RELOC_RX_24_OP
4228 ENUMX
4229   BFD_RELOC_RX_32_OP
4230 ENUMX
4231   BFD_RELOC_RX_8U
4232 ENUMX
4233   BFD_RELOC_RX_16U
4234 ENUMX
4235   BFD_RELOC_RX_24U
4236 ENUMX
4237   BFD_RELOC_RX_DIR3U_PCREL
4238 ENUMX
4239   BFD_RELOC_RX_DIFF
4240 ENUMX
4241   BFD_RELOC_RX_GPRELB
4242 ENUMX
4243   BFD_RELOC_RX_GPRELW
4244 ENUMX
4245   BFD_RELOC_RX_GPRELL
4246 ENUMX
4247   BFD_RELOC_RX_SYM
4248 ENUMX
4249   BFD_RELOC_RX_OP_SUBTRACT
4250 ENUMX
4251   BFD_RELOC_RX_ABS8
4252 ENUMX
4253   BFD_RELOC_RX_ABS16
4254 ENUMX
4255   BFD_RELOC_RX_ABS32
4256 ENUMX
4257   BFD_RELOC_RX_ABS16U
4258 ENUMX
4259   BFD_RELOC_RX_ABS16UW
4260 ENUMX
4261   BFD_RELOC_RX_ABS16UL
4262 ENUMX
4263   BFD_RELOC_RX_RELAX
4264 ENUMDOC
4265   Renesas RX Relocations.
4266
4267 ENUM
4268   BFD_RELOC_390_12
4269 ENUMDOC
4270    Direct 12 bit.
4271 ENUM
4272   BFD_RELOC_390_GOT12
4273 ENUMDOC
4274   12 bit GOT offset.
4275 ENUM
4276   BFD_RELOC_390_PLT32
4277 ENUMDOC
4278   32 bit PC relative PLT address.
4279 ENUM
4280   BFD_RELOC_390_COPY
4281 ENUMDOC
4282   Copy symbol at runtime.
4283 ENUM
4284   BFD_RELOC_390_GLOB_DAT
4285 ENUMDOC
4286   Create GOT entry.
4287 ENUM
4288   BFD_RELOC_390_JMP_SLOT
4289 ENUMDOC
4290   Create PLT entry.
4291 ENUM
4292   BFD_RELOC_390_RELATIVE
4293 ENUMDOC
4294   Adjust by program base.
4295 ENUM
4296   BFD_RELOC_390_GOTPC
4297 ENUMDOC
4298   32 bit PC relative offset to GOT.
4299 ENUM
4300   BFD_RELOC_390_GOT16
4301 ENUMDOC
4302   16 bit GOT offset.
4303 ENUM
4304   BFD_RELOC_390_PC16DBL
4305 ENUMDOC
4306   PC relative 16 bit shifted by 1.
4307 ENUM
4308   BFD_RELOC_390_PLT16DBL
4309 ENUMDOC
4310   16 bit PC rel. PLT shifted by 1.
4311 ENUM
4312   BFD_RELOC_390_PC32DBL
4313 ENUMDOC
4314   PC relative 32 bit shifted by 1.
4315 ENUM
4316   BFD_RELOC_390_PLT32DBL
4317 ENUMDOC
4318   32 bit PC rel. PLT shifted by 1.
4319 ENUM
4320   BFD_RELOC_390_GOTPCDBL
4321 ENUMDOC
4322   32 bit PC rel. GOT shifted by 1.
4323 ENUM
4324   BFD_RELOC_390_GOT64
4325 ENUMDOC
4326   64 bit GOT offset.
4327 ENUM
4328   BFD_RELOC_390_PLT64
4329 ENUMDOC
4330   64 bit PC relative PLT address.
4331 ENUM
4332   BFD_RELOC_390_GOTENT
4333 ENUMDOC
4334   32 bit rel. offset to GOT entry.
4335 ENUM
4336   BFD_RELOC_390_GOTOFF64
4337 ENUMDOC
4338   64 bit offset to GOT.
4339 ENUM
4340   BFD_RELOC_390_GOTPLT12
4341 ENUMDOC
4342   12-bit offset to symbol-entry within GOT, with PLT handling.
4343 ENUM
4344   BFD_RELOC_390_GOTPLT16
4345 ENUMDOC
4346   16-bit offset to symbol-entry within GOT, with PLT handling.
4347 ENUM
4348   BFD_RELOC_390_GOTPLT32
4349 ENUMDOC
4350   32-bit offset to symbol-entry within GOT, with PLT handling.
4351 ENUM
4352   BFD_RELOC_390_GOTPLT64
4353 ENUMDOC
4354   64-bit offset to symbol-entry within GOT, with PLT handling.
4355 ENUM
4356   BFD_RELOC_390_GOTPLTENT
4357 ENUMDOC
4358   32-bit rel. offset to symbol-entry within GOT, with PLT handling.
4359 ENUM
4360   BFD_RELOC_390_PLTOFF16
4361 ENUMDOC
4362   16-bit rel. offset from the GOT to a PLT entry.
4363 ENUM
4364   BFD_RELOC_390_PLTOFF32
4365 ENUMDOC
4366   32-bit rel. offset from the GOT to a PLT entry.
4367 ENUM
4368   BFD_RELOC_390_PLTOFF64
4369 ENUMDOC
4370   64-bit rel. offset from the GOT to a PLT entry.
4371
4372 ENUM
4373   BFD_RELOC_390_TLS_LOAD
4374 ENUMX
4375   BFD_RELOC_390_TLS_GDCALL
4376 ENUMX
4377   BFD_RELOC_390_TLS_LDCALL
4378 ENUMX
4379   BFD_RELOC_390_TLS_GD32
4380 ENUMX
4381   BFD_RELOC_390_TLS_GD64
4382 ENUMX
4383   BFD_RELOC_390_TLS_GOTIE12
4384 ENUMX
4385   BFD_RELOC_390_TLS_GOTIE32
4386 ENUMX
4387   BFD_RELOC_390_TLS_GOTIE64
4388 ENUMX
4389   BFD_RELOC_390_TLS_LDM32
4390 ENUMX
4391   BFD_RELOC_390_TLS_LDM64
4392 ENUMX
4393   BFD_RELOC_390_TLS_IE32
4394 ENUMX
4395   BFD_RELOC_390_TLS_IE64
4396 ENUMX
4397   BFD_RELOC_390_TLS_IEENT
4398 ENUMX
4399   BFD_RELOC_390_TLS_LE32
4400 ENUMX
4401   BFD_RELOC_390_TLS_LE64
4402 ENUMX
4403   BFD_RELOC_390_TLS_LDO32
4404 ENUMX
4405   BFD_RELOC_390_TLS_LDO64
4406 ENUMX
4407   BFD_RELOC_390_TLS_DTPMOD
4408 ENUMX
4409   BFD_RELOC_390_TLS_DTPOFF
4410 ENUMX
4411   BFD_RELOC_390_TLS_TPOFF
4412 ENUMDOC
4413   s390 tls relocations.
4414
4415 ENUM
4416   BFD_RELOC_390_20
4417 ENUMX
4418   BFD_RELOC_390_GOT20
4419 ENUMX
4420   BFD_RELOC_390_GOTPLT20
4421 ENUMX
4422   BFD_RELOC_390_TLS_GOTIE20
4423 ENUMDOC
4424   Long displacement extension.
4425
4426 ENUM
4427   BFD_RELOC_SCORE_GPREL15
4428 ENUMDOC
4429   Score relocations
4430   Low 16 bit for load/store
4431 ENUM
4432   BFD_RELOC_SCORE_DUMMY2
4433 ENUMX
4434   BFD_RELOC_SCORE_JMP
4435 ENUMDOC
4436   This is a 24-bit reloc with the right 1 bit assumed to be 0
4437 ENUM
4438   BFD_RELOC_SCORE_BRANCH
4439 ENUMDOC
4440   This is a 19-bit reloc with the right 1 bit assumed to be 0
4441 ENUM
4442   BFD_RELOC_SCORE_IMM30
4443 ENUMDOC
4444   This is a 32-bit reloc for 48-bit instructions.
4445 ENUM
4446   BFD_RELOC_SCORE_IMM32
4447 ENUMDOC
4448   This is a 32-bit reloc for 48-bit instructions.
4449 ENUM
4450   BFD_RELOC_SCORE16_JMP
4451 ENUMDOC
4452   This is a 11-bit reloc with the right 1 bit assumed to be 0
4453 ENUM
4454   BFD_RELOC_SCORE16_BRANCH
4455 ENUMDOC
4456   This is a 8-bit reloc with the right 1 bit assumed to be 0
4457 ENUM
4458   BFD_RELOC_SCORE_BCMP
4459 ENUMDOC
4460    This is a 9-bit reloc with the right 1 bit assumed to be 0
4461 ENUM
4462   BFD_RELOC_SCORE_GOT15
4463 ENUMX
4464   BFD_RELOC_SCORE_GOT_LO16
4465 ENUMX
4466   BFD_RELOC_SCORE_CALL15
4467 ENUMX
4468   BFD_RELOC_SCORE_DUMMY_HI16
4469 ENUMDOC
4470   Undocumented Score relocs
4471
4472 ENUM
4473   BFD_RELOC_IP2K_FR9
4474 ENUMDOC
4475   Scenix IP2K - 9-bit register number / data address
4476 ENUM
4477   BFD_RELOC_IP2K_BANK
4478 ENUMDOC
4479   Scenix IP2K - 4-bit register/data bank number
4480 ENUM
4481   BFD_RELOC_IP2K_ADDR16CJP
4482 ENUMDOC
4483   Scenix IP2K - low 13 bits of instruction word address
4484 ENUM
4485   BFD_RELOC_IP2K_PAGE3
4486 ENUMDOC
4487   Scenix IP2K - high 3 bits of instruction word address
4488 ENUM
4489   BFD_RELOC_IP2K_LO8DATA
4490 ENUMX
4491   BFD_RELOC_IP2K_HI8DATA
4492 ENUMX
4493   BFD_RELOC_IP2K_EX8DATA
4494 ENUMDOC
4495   Scenix IP2K - ext/low/high 8 bits of data address
4496 ENUM
4497   BFD_RELOC_IP2K_LO8INSN
4498 ENUMX
4499   BFD_RELOC_IP2K_HI8INSN
4500 ENUMDOC
4501   Scenix IP2K - low/high 8 bits of instruction word address
4502 ENUM
4503   BFD_RELOC_IP2K_PC_SKIP
4504 ENUMDOC
4505   Scenix IP2K - even/odd PC modifier to modify snb pcl.0
4506 ENUM
4507   BFD_RELOC_IP2K_TEXT
4508 ENUMDOC
4509   Scenix IP2K - 16 bit word address in text section.
4510 ENUM
4511   BFD_RELOC_IP2K_FR_OFFSET
4512 ENUMDOC
4513   Scenix IP2K - 7-bit sp or dp offset
4514 ENUM
4515   BFD_RELOC_VPE4KMATH_DATA
4516 ENUMX
4517   BFD_RELOC_VPE4KMATH_INSN
4518 ENUMDOC
4519   Scenix VPE4K coprocessor - data/insn-space addressing
4520
4521 ENUM
4522   BFD_RELOC_VTABLE_INHERIT
4523 ENUMX
4524   BFD_RELOC_VTABLE_ENTRY
4525 ENUMDOC
4526   These two relocations are used by the linker to determine which of
4527   the entries in a C++ virtual function table are actually used.  When
4528   the --gc-sections option is given, the linker will zero out the entries
4529   that are not used, so that the code for those functions need not be
4530   included in the output.
4531
4532   VTABLE_INHERIT is a zero-space relocation used to describe to the
4533   linker the inheritance tree of a C++ virtual function table.  The
4534   relocation's symbol should be the parent class' vtable, and the
4535   relocation should be located at the child vtable.
4536
4537   VTABLE_ENTRY is a zero-space relocation that describes the use of a
4538   virtual function table entry.  The reloc's symbol should refer to the
4539   table of the class mentioned in the code.  Off of that base, an offset
4540   describes the entry that is being used.  For Rela hosts, this offset
4541   is stored in the reloc's addend.  For Rel hosts, we are forced to put
4542   this offset in the reloc's section offset.
4543
4544 ENUM
4545   BFD_RELOC_IA64_IMM14
4546 ENUMX
4547   BFD_RELOC_IA64_IMM22
4548 ENUMX
4549   BFD_RELOC_IA64_IMM64
4550 ENUMX
4551   BFD_RELOC_IA64_DIR32MSB
4552 ENUMX
4553   BFD_RELOC_IA64_DIR32LSB
4554 ENUMX
4555   BFD_RELOC_IA64_DIR64MSB
4556 ENUMX
4557   BFD_RELOC_IA64_DIR64LSB
4558 ENUMX
4559   BFD_RELOC_IA64_GPREL22
4560 ENUMX
4561   BFD_RELOC_IA64_GPREL64I
4562 ENUMX
4563   BFD_RELOC_IA64_GPREL32MSB
4564 ENUMX
4565   BFD_RELOC_IA64_GPREL32LSB
4566 ENUMX
4567   BFD_RELOC_IA64_GPREL64MSB
4568 ENUMX
4569   BFD_RELOC_IA64_GPREL64LSB
4570 ENUMX
4571   BFD_RELOC_IA64_LTOFF22
4572 ENUMX
4573   BFD_RELOC_IA64_LTOFF64I
4574 ENUMX
4575   BFD_RELOC_IA64_PLTOFF22
4576 ENUMX
4577   BFD_RELOC_IA64_PLTOFF64I
4578 ENUMX
4579   BFD_RELOC_IA64_PLTOFF64MSB
4580 ENUMX
4581   BFD_RELOC_IA64_PLTOFF64LSB
4582 ENUMX
4583   BFD_RELOC_IA64_FPTR64I
4584 ENUMX
4585   BFD_RELOC_IA64_FPTR32MSB
4586 ENUMX
4587   BFD_RELOC_IA64_FPTR32LSB
4588 ENUMX
4589   BFD_RELOC_IA64_FPTR64MSB
4590 ENUMX
4591   BFD_RELOC_IA64_FPTR64LSB
4592 ENUMX
4593   BFD_RELOC_IA64_PCREL21B
4594 ENUMX
4595   BFD_RELOC_IA64_PCREL21BI
4596 ENUMX
4597   BFD_RELOC_IA64_PCREL21M
4598 ENUMX
4599   BFD_RELOC_IA64_PCREL21F
4600 ENUMX
4601   BFD_RELOC_IA64_PCREL22
4602 ENUMX
4603   BFD_RELOC_IA64_PCREL60B
4604 ENUMX
4605   BFD_RELOC_IA64_PCREL64I
4606 ENUMX
4607   BFD_RELOC_IA64_PCREL32MSB
4608 ENUMX
4609   BFD_RELOC_IA64_PCREL32LSB
4610 ENUMX
4611   BFD_RELOC_IA64_PCREL64MSB
4612 ENUMX
4613   BFD_RELOC_IA64_PCREL64LSB
4614 ENUMX
4615   BFD_RELOC_IA64_LTOFF_FPTR22
4616 ENUMX
4617   BFD_RELOC_IA64_LTOFF_FPTR64I
4618 ENUMX
4619   BFD_RELOC_IA64_LTOFF_FPTR32MSB
4620 ENUMX
4621   BFD_RELOC_IA64_LTOFF_FPTR32LSB
4622 ENUMX
4623   BFD_RELOC_IA64_LTOFF_FPTR64MSB
4624 ENUMX
4625   BFD_RELOC_IA64_LTOFF_FPTR64LSB
4626 ENUMX
4627   BFD_RELOC_IA64_SEGREL32MSB
4628 ENUMX
4629   BFD_RELOC_IA64_SEGREL32LSB
4630 ENUMX
4631   BFD_RELOC_IA64_SEGREL64MSB
4632 ENUMX
4633   BFD_RELOC_IA64_SEGREL64LSB
4634 ENUMX
4635   BFD_RELOC_IA64_SECREL32MSB
4636 ENUMX
4637   BFD_RELOC_IA64_SECREL32LSB
4638 ENUMX
4639   BFD_RELOC_IA64_SECREL64MSB
4640 ENUMX
4641   BFD_RELOC_IA64_SECREL64LSB
4642 ENUMX
4643   BFD_RELOC_IA64_REL32MSB
4644 ENUMX
4645   BFD_RELOC_IA64_REL32LSB
4646 ENUMX
4647   BFD_RELOC_IA64_REL64MSB
4648 ENUMX
4649   BFD_RELOC_IA64_REL64LSB
4650 ENUMX
4651   BFD_RELOC_IA64_LTV32MSB
4652 ENUMX
4653   BFD_RELOC_IA64_LTV32LSB
4654 ENUMX
4655   BFD_RELOC_IA64_LTV64MSB
4656 ENUMX
4657   BFD_RELOC_IA64_LTV64LSB
4658 ENUMX
4659   BFD_RELOC_IA64_IPLTMSB
4660 ENUMX
4661   BFD_RELOC_IA64_IPLTLSB
4662 ENUMX
4663   BFD_RELOC_IA64_COPY
4664 ENUMX
4665   BFD_RELOC_IA64_LTOFF22X
4666 ENUMX
4667   BFD_RELOC_IA64_LDXMOV
4668 ENUMX
4669   BFD_RELOC_IA64_TPREL14
4670 ENUMX
4671   BFD_RELOC_IA64_TPREL22
4672 ENUMX
4673   BFD_RELOC_IA64_TPREL64I
4674 ENUMX
4675   BFD_RELOC_IA64_TPREL64MSB
4676 ENUMX
4677   BFD_RELOC_IA64_TPREL64LSB
4678 ENUMX
4679   BFD_RELOC_IA64_LTOFF_TPREL22
4680 ENUMX
4681   BFD_RELOC_IA64_DTPMOD64MSB
4682 ENUMX
4683   BFD_RELOC_IA64_DTPMOD64LSB
4684 ENUMX
4685   BFD_RELOC_IA64_LTOFF_DTPMOD22
4686 ENUMX
4687   BFD_RELOC_IA64_DTPREL14
4688 ENUMX
4689   BFD_RELOC_IA64_DTPREL22
4690 ENUMX
4691   BFD_RELOC_IA64_DTPREL64I
4692 ENUMX
4693   BFD_RELOC_IA64_DTPREL32MSB
4694 ENUMX
4695   BFD_RELOC_IA64_DTPREL32LSB
4696 ENUMX
4697   BFD_RELOC_IA64_DTPREL64MSB
4698 ENUMX
4699   BFD_RELOC_IA64_DTPREL64LSB
4700 ENUMX
4701   BFD_RELOC_IA64_LTOFF_DTPREL22
4702 ENUMDOC
4703   Intel IA64 Relocations.
4704
4705 ENUM
4706   BFD_RELOC_M68HC11_HI8
4707 ENUMDOC
4708   Motorola 68HC11 reloc.
4709   This is the 8 bit high part of an absolute address.
4710 ENUM
4711   BFD_RELOC_M68HC11_LO8
4712 ENUMDOC
4713   Motorola 68HC11 reloc.
4714   This is the 8 bit low part of an absolute address.
4715 ENUM
4716   BFD_RELOC_M68HC11_3B
4717 ENUMDOC
4718   Motorola 68HC11 reloc.
4719   This is the 3 bit of a value.
4720 ENUM
4721   BFD_RELOC_M68HC11_RL_JUMP
4722 ENUMDOC
4723   Motorola 68HC11 reloc.
4724   This reloc marks the beginning of a jump/call instruction.
4725   It is used for linker relaxation to correctly identify beginning
4726   of instruction and change some branches to use PC-relative
4727   addressing mode.
4728 ENUM
4729   BFD_RELOC_M68HC11_RL_GROUP
4730 ENUMDOC
4731   Motorola 68HC11 reloc.
4732   This reloc marks a group of several instructions that gcc generates
4733   and for which the linker relaxation pass can modify and/or remove
4734   some of them.
4735 ENUM
4736   BFD_RELOC_M68HC11_LO16
4737 ENUMDOC
4738   Motorola 68HC11 reloc.
4739   This is the 16-bit lower part of an address.  It is used for 'call'
4740   instruction to specify the symbol address without any special
4741   transformation (due to memory bank window).
4742 ENUM
4743   BFD_RELOC_M68HC11_PAGE
4744 ENUMDOC
4745   Motorola 68HC11 reloc.
4746   This is a 8-bit reloc that specifies the page number of an address.
4747   It is used by 'call' instruction to specify the page number of
4748   the symbol.
4749 ENUM
4750   BFD_RELOC_M68HC11_24
4751 ENUMDOC
4752   Motorola 68HC11 reloc.
4753   This is a 24-bit reloc that represents the address with a 16-bit
4754   value and a 8-bit page number.  The symbol address is transformed
4755   to follow the 16K memory bank of 68HC12 (seen as mapped in the window).
4756 ENUM
4757   BFD_RELOC_M68HC12_5B
4758 ENUMDOC
4759   Motorola 68HC12 reloc.
4760   This is the 5 bits of a value.
4761
4762 ENUM
4763   BFD_RELOC_16C_NUM08
4764 ENUMX
4765   BFD_RELOC_16C_NUM08_C
4766 ENUMX
4767   BFD_RELOC_16C_NUM16
4768 ENUMX
4769   BFD_RELOC_16C_NUM16_C
4770 ENUMX
4771   BFD_RELOC_16C_NUM32
4772 ENUMX
4773   BFD_RELOC_16C_NUM32_C
4774 ENUMX
4775   BFD_RELOC_16C_DISP04
4776 ENUMX
4777   BFD_RELOC_16C_DISP04_C
4778 ENUMX
4779   BFD_RELOC_16C_DISP08
4780 ENUMX
4781   BFD_RELOC_16C_DISP08_C
4782 ENUMX
4783   BFD_RELOC_16C_DISP16
4784 ENUMX
4785   BFD_RELOC_16C_DISP16_C
4786 ENUMX
4787   BFD_RELOC_16C_DISP24
4788 ENUMX
4789   BFD_RELOC_16C_DISP24_C
4790 ENUMX
4791   BFD_RELOC_16C_DISP24a
4792 ENUMX
4793   BFD_RELOC_16C_DISP24a_C
4794 ENUMX
4795   BFD_RELOC_16C_REG04
4796 ENUMX
4797   BFD_RELOC_16C_REG04_C
4798 ENUMX
4799   BFD_RELOC_16C_REG04a
4800 ENUMX
4801   BFD_RELOC_16C_REG04a_C
4802 ENUMX
4803   BFD_RELOC_16C_REG14
4804 ENUMX
4805   BFD_RELOC_16C_REG14_C
4806 ENUMX
4807   BFD_RELOC_16C_REG16
4808 ENUMX
4809   BFD_RELOC_16C_REG16_C
4810 ENUMX
4811   BFD_RELOC_16C_REG20
4812 ENUMX
4813   BFD_RELOC_16C_REG20_C
4814 ENUMX
4815   BFD_RELOC_16C_ABS20
4816 ENUMX
4817   BFD_RELOC_16C_ABS20_C
4818 ENUMX
4819   BFD_RELOC_16C_ABS24
4820 ENUMX
4821   BFD_RELOC_16C_ABS24_C
4822 ENUMX
4823   BFD_RELOC_16C_IMM04
4824 ENUMX
4825   BFD_RELOC_16C_IMM04_C
4826 ENUMX
4827   BFD_RELOC_16C_IMM16
4828 ENUMX
4829   BFD_RELOC_16C_IMM16_C
4830 ENUMX
4831   BFD_RELOC_16C_IMM20
4832 ENUMX
4833   BFD_RELOC_16C_IMM20_C
4834 ENUMX
4835   BFD_RELOC_16C_IMM24
4836 ENUMX
4837   BFD_RELOC_16C_IMM24_C
4838 ENUMX
4839   BFD_RELOC_16C_IMM32
4840 ENUMX
4841   BFD_RELOC_16C_IMM32_C
4842 ENUMDOC
4843   NS CR16C Relocations.
4844
4845 ENUM
4846   BFD_RELOC_CR16_NUM8
4847 ENUMX
4848   BFD_RELOC_CR16_NUM16
4849 ENUMX
4850   BFD_RELOC_CR16_NUM32
4851 ENUMX
4852   BFD_RELOC_CR16_NUM32a
4853 ENUMX
4854   BFD_RELOC_CR16_REGREL0
4855 ENUMX
4856   BFD_RELOC_CR16_REGREL4
4857 ENUMX
4858   BFD_RELOC_CR16_REGREL4a
4859 ENUMX
4860   BFD_RELOC_CR16_REGREL14
4861 ENUMX
4862   BFD_RELOC_CR16_REGREL14a
4863 ENUMX
4864   BFD_RELOC_CR16_REGREL16
4865 ENUMX
4866   BFD_RELOC_CR16_REGREL20
4867 ENUMX
4868   BFD_RELOC_CR16_REGREL20a
4869 ENUMX
4870   BFD_RELOC_CR16_ABS20
4871 ENUMX
4872   BFD_RELOC_CR16_ABS24
4873 ENUMX
4874   BFD_RELOC_CR16_IMM4
4875 ENUMX
4876   BFD_RELOC_CR16_IMM8
4877 ENUMX
4878   BFD_RELOC_CR16_IMM16
4879 ENUMX
4880   BFD_RELOC_CR16_IMM20
4881 ENUMX
4882   BFD_RELOC_CR16_IMM24
4883 ENUMX
4884   BFD_RELOC_CR16_IMM32
4885 ENUMX
4886   BFD_RELOC_CR16_IMM32a
4887 ENUMX
4888   BFD_RELOC_CR16_DISP4
4889 ENUMX
4890   BFD_RELOC_CR16_DISP8
4891 ENUMX
4892   BFD_RELOC_CR16_DISP16
4893 ENUMX
4894   BFD_RELOC_CR16_DISP20
4895 ENUMX
4896   BFD_RELOC_CR16_DISP24
4897 ENUMX
4898   BFD_RELOC_CR16_DISP24a
4899 ENUMX
4900   BFD_RELOC_CR16_SWITCH8
4901 ENUMX
4902   BFD_RELOC_CR16_SWITCH16
4903 ENUMX
4904   BFD_RELOC_CR16_SWITCH32
4905 ENUMX
4906   BFD_RELOC_CR16_GOT_REGREL20
4907 ENUMX
4908   BFD_RELOC_CR16_GOTC_REGREL20
4909 ENUMX
4910   BFD_RELOC_CR16_GLOB_DAT
4911 ENUMDOC
4912   NS CR16 Relocations.
4913
4914 ENUM
4915   BFD_RELOC_CRX_REL4
4916 ENUMX
4917   BFD_RELOC_CRX_REL8
4918 ENUMX
4919   BFD_RELOC_CRX_REL8_CMP
4920 ENUMX
4921   BFD_RELOC_CRX_REL16
4922 ENUMX
4923   BFD_RELOC_CRX_REL24
4924 ENUMX
4925   BFD_RELOC_CRX_REL32
4926 ENUMX
4927   BFD_RELOC_CRX_REGREL12
4928 ENUMX
4929   BFD_RELOC_CRX_REGREL22
4930 ENUMX
4931   BFD_RELOC_CRX_REGREL28
4932 ENUMX
4933   BFD_RELOC_CRX_REGREL32
4934 ENUMX
4935   BFD_RELOC_CRX_ABS16
4936 ENUMX
4937   BFD_RELOC_CRX_ABS32
4938 ENUMX
4939   BFD_RELOC_CRX_NUM8
4940 ENUMX
4941   BFD_RELOC_CRX_NUM16
4942 ENUMX
4943   BFD_RELOC_CRX_NUM32
4944 ENUMX
4945   BFD_RELOC_CRX_IMM16
4946 ENUMX
4947   BFD_RELOC_CRX_IMM32
4948 ENUMX
4949   BFD_RELOC_CRX_SWITCH8
4950 ENUMX
4951   BFD_RELOC_CRX_SWITCH16
4952 ENUMX
4953   BFD_RELOC_CRX_SWITCH32
4954 ENUMDOC
4955   NS CRX Relocations.
4956
4957 ENUM
4958   BFD_RELOC_CRIS_BDISP8
4959 ENUMX
4960   BFD_RELOC_CRIS_UNSIGNED_5
4961 ENUMX
4962   BFD_RELOC_CRIS_SIGNED_6
4963 ENUMX
4964   BFD_RELOC_CRIS_UNSIGNED_6
4965 ENUMX
4966   BFD_RELOC_CRIS_SIGNED_8
4967 ENUMX
4968   BFD_RELOC_CRIS_UNSIGNED_8
4969 ENUMX
4970   BFD_RELOC_CRIS_SIGNED_16
4971 ENUMX
4972   BFD_RELOC_CRIS_UNSIGNED_16
4973 ENUMX
4974   BFD_RELOC_CRIS_LAPCQ_OFFSET
4975 ENUMX
4976   BFD_RELOC_CRIS_UNSIGNED_4
4977 ENUMDOC
4978   These relocs are only used within the CRIS assembler.  They are not
4979   (at present) written to any object files.
4980 ENUM
4981   BFD_RELOC_CRIS_COPY
4982 ENUMX
4983   BFD_RELOC_CRIS_GLOB_DAT
4984 ENUMX
4985   BFD_RELOC_CRIS_JUMP_SLOT
4986 ENUMX
4987   BFD_RELOC_CRIS_RELATIVE
4988 ENUMDOC
4989   Relocs used in ELF shared libraries for CRIS.
4990 ENUM
4991   BFD_RELOC_CRIS_32_GOT
4992 ENUMDOC
4993   32-bit offset to symbol-entry within GOT.
4994 ENUM
4995   BFD_RELOC_CRIS_16_GOT
4996 ENUMDOC
4997   16-bit offset to symbol-entry within GOT.
4998 ENUM
4999   BFD_RELOC_CRIS_32_GOTPLT
5000 ENUMDOC
5001   32-bit offset to symbol-entry within GOT, with PLT handling.
5002 ENUM
5003   BFD_RELOC_CRIS_16_GOTPLT
5004 ENUMDOC
5005   16-bit offset to symbol-entry within GOT, with PLT handling.
5006 ENUM
5007   BFD_RELOC_CRIS_32_GOTREL
5008 ENUMDOC
5009   32-bit offset to symbol, relative to GOT.
5010 ENUM
5011   BFD_RELOC_CRIS_32_PLT_GOTREL
5012 ENUMDOC
5013   32-bit offset to symbol with PLT entry, relative to GOT.
5014 ENUM
5015   BFD_RELOC_CRIS_32_PLT_PCREL
5016 ENUMDOC
5017   32-bit offset to symbol with PLT entry, relative to this relocation.
5018
5019 ENUM
5020   BFD_RELOC_CRIS_32_GOT_GD
5021 ENUMX
5022   BFD_RELOC_CRIS_16_GOT_GD
5023 ENUMX
5024   BFD_RELOC_CRIS_32_GD
5025 ENUMX
5026   BFD_RELOC_CRIS_DTP
5027 ENUMX
5028   BFD_RELOC_CRIS_32_DTPREL
5029 ENUMX
5030   BFD_RELOC_CRIS_16_DTPREL
5031 ENUMX
5032   BFD_RELOC_CRIS_32_GOT_TPREL
5033 ENUMX
5034   BFD_RELOC_CRIS_16_GOT_TPREL
5035 ENUMX
5036   BFD_RELOC_CRIS_32_TPREL
5037 ENUMX
5038   BFD_RELOC_CRIS_16_TPREL
5039 ENUMX
5040   BFD_RELOC_CRIS_DTPMOD
5041 ENUMX
5042   BFD_RELOC_CRIS_32_IE
5043 ENUMDOC
5044   Relocs used in TLS code for CRIS.
5045
5046 ENUM
5047   BFD_RELOC_860_COPY
5048 ENUMX
5049   BFD_RELOC_860_GLOB_DAT
5050 ENUMX
5051   BFD_RELOC_860_JUMP_SLOT
5052 ENUMX
5053   BFD_RELOC_860_RELATIVE
5054 ENUMX
5055   BFD_RELOC_860_PC26
5056 ENUMX
5057   BFD_RELOC_860_PLT26
5058 ENUMX
5059   BFD_RELOC_860_PC16
5060 ENUMX
5061   BFD_RELOC_860_LOW0
5062 ENUMX
5063   BFD_RELOC_860_SPLIT0
5064 ENUMX
5065   BFD_RELOC_860_LOW1
5066 ENUMX
5067   BFD_RELOC_860_SPLIT1
5068 ENUMX
5069   BFD_RELOC_860_LOW2
5070 ENUMX
5071   BFD_RELOC_860_SPLIT2
5072 ENUMX
5073   BFD_RELOC_860_LOW3
5074 ENUMX
5075   BFD_RELOC_860_LOGOT0
5076 ENUMX
5077   BFD_RELOC_860_SPGOT0
5078 ENUMX
5079   BFD_RELOC_860_LOGOT1
5080 ENUMX
5081   BFD_RELOC_860_SPGOT1
5082 ENUMX
5083   BFD_RELOC_860_LOGOTOFF0
5084 ENUMX
5085   BFD_RELOC_860_SPGOTOFF0
5086 ENUMX
5087   BFD_RELOC_860_LOGOTOFF1
5088 ENUMX
5089   BFD_RELOC_860_SPGOTOFF1
5090 ENUMX
5091   BFD_RELOC_860_LOGOTOFF2
5092 ENUMX
5093   BFD_RELOC_860_LOGOTOFF3
5094 ENUMX
5095   BFD_RELOC_860_LOPC
5096 ENUMX
5097   BFD_RELOC_860_HIGHADJ
5098 ENUMX
5099   BFD_RELOC_860_HAGOT
5100 ENUMX
5101   BFD_RELOC_860_HAGOTOFF
5102 ENUMX
5103   BFD_RELOC_860_HAPC
5104 ENUMX
5105   BFD_RELOC_860_HIGH
5106 ENUMX
5107   BFD_RELOC_860_HIGOT
5108 ENUMX
5109   BFD_RELOC_860_HIGOTOFF
5110 ENUMDOC
5111   Intel i860 Relocations.
5112
5113 ENUM
5114   BFD_RELOC_OPENRISC_ABS_26
5115 ENUMX
5116   BFD_RELOC_OPENRISC_REL_26
5117 ENUMDOC
5118   OpenRISC Relocations.
5119
5120 ENUM
5121   BFD_RELOC_H8_DIR16A8
5122 ENUMX
5123   BFD_RELOC_H8_DIR16R8
5124 ENUMX
5125   BFD_RELOC_H8_DIR24A8
5126 ENUMX
5127   BFD_RELOC_H8_DIR24R8
5128 ENUMX
5129   BFD_RELOC_H8_DIR32A16
5130 ENUMDOC
5131   H8 elf Relocations.
5132
5133 ENUM
5134   BFD_RELOC_XSTORMY16_REL_12
5135 ENUMX
5136   BFD_RELOC_XSTORMY16_12
5137 ENUMX
5138   BFD_RELOC_XSTORMY16_24
5139 ENUMX
5140   BFD_RELOC_XSTORMY16_FPTR16
5141 ENUMDOC
5142   Sony Xstormy16 Relocations.
5143
5144 ENUM
5145   BFD_RELOC_RELC
5146 ENUMDOC
5147   Self-describing complex relocations.
5148 COMMENT
5149
5150 ENUM
5151   BFD_RELOC_XC16X_PAG
5152 ENUMX
5153   BFD_RELOC_XC16X_POF
5154 ENUMX
5155   BFD_RELOC_XC16X_SEG
5156 ENUMX
5157   BFD_RELOC_XC16X_SOF
5158 ENUMDOC
5159   Infineon Relocations.
5160
5161 ENUM
5162   BFD_RELOC_VAX_GLOB_DAT
5163 ENUMX
5164   BFD_RELOC_VAX_JMP_SLOT
5165 ENUMX
5166   BFD_RELOC_VAX_RELATIVE
5167 ENUMDOC
5168   Relocations used by VAX ELF.
5169
5170 ENUM
5171   BFD_RELOC_MT_PC16
5172 ENUMDOC
5173   Morpho MT - 16 bit immediate relocation.
5174 ENUM
5175   BFD_RELOC_MT_HI16
5176 ENUMDOC
5177   Morpho MT - Hi 16 bits of an address.
5178 ENUM
5179   BFD_RELOC_MT_LO16
5180 ENUMDOC
5181   Morpho MT - Low 16 bits of an address.
5182 ENUM
5183   BFD_RELOC_MT_GNU_VTINHERIT
5184 ENUMDOC
5185   Morpho MT - Used to tell the linker which vtable entries are used.
5186 ENUM
5187   BFD_RELOC_MT_GNU_VTENTRY
5188 ENUMDOC
5189   Morpho MT - Used to tell the linker which vtable entries are used.
5190 ENUM
5191   BFD_RELOC_MT_PCINSN8
5192 ENUMDOC
5193   Morpho MT - 8 bit immediate relocation.
5194
5195 ENUM
5196   BFD_RELOC_MSP430_10_PCREL
5197 ENUMX
5198   BFD_RELOC_MSP430_16_PCREL
5199 ENUMX
5200   BFD_RELOC_MSP430_16
5201 ENUMX
5202   BFD_RELOC_MSP430_16_PCREL_BYTE
5203 ENUMX
5204   BFD_RELOC_MSP430_16_BYTE
5205 ENUMX
5206   BFD_RELOC_MSP430_2X_PCREL
5207 ENUMX
5208   BFD_RELOC_MSP430_RL_PCREL
5209 ENUMDOC
5210   msp430 specific relocation codes
5211
5212 ENUM
5213   BFD_RELOC_IQ2000_OFFSET_16
5214 ENUMX
5215   BFD_RELOC_IQ2000_OFFSET_21
5216 ENUMX
5217   BFD_RELOC_IQ2000_UHI16
5218 ENUMDOC
5219   IQ2000 Relocations.
5220
5221 ENUM
5222   BFD_RELOC_XTENSA_RTLD
5223 ENUMDOC
5224   Special Xtensa relocation used only by PLT entries in ELF shared
5225   objects to indicate that the runtime linker should set the value
5226   to one of its own internal functions or data structures.
5227 ENUM
5228   BFD_RELOC_XTENSA_GLOB_DAT
5229 ENUMX
5230   BFD_RELOC_XTENSA_JMP_SLOT
5231 ENUMX
5232   BFD_RELOC_XTENSA_RELATIVE
5233 ENUMDOC
5234   Xtensa relocations for ELF shared objects.
5235 ENUM
5236   BFD_RELOC_XTENSA_PLT
5237 ENUMDOC
5238   Xtensa relocation used in ELF object files for symbols that may require
5239   PLT entries.  Otherwise, this is just a generic 32-bit relocation.
5240 ENUM
5241   BFD_RELOC_XTENSA_DIFF8
5242 ENUMX
5243   BFD_RELOC_XTENSA_DIFF16
5244 ENUMX
5245   BFD_RELOC_XTENSA_DIFF32
5246 ENUMDOC
5247   Xtensa relocations to mark the difference of two local symbols.
5248   These are only needed to support linker relaxation and can be ignored
5249   when not relaxing.  The field is set to the value of the difference
5250   assuming no relaxation.  The relocation encodes the position of the
5251   first symbol so the linker can determine whether to adjust the field
5252   value.
5253 ENUM
5254   BFD_RELOC_XTENSA_SLOT0_OP
5255 ENUMX
5256   BFD_RELOC_XTENSA_SLOT1_OP
5257 ENUMX
5258   BFD_RELOC_XTENSA_SLOT2_OP
5259 ENUMX
5260   BFD_RELOC_XTENSA_SLOT3_OP
5261 ENUMX
5262   BFD_RELOC_XTENSA_SLOT4_OP
5263 ENUMX
5264   BFD_RELOC_XTENSA_SLOT5_OP
5265 ENUMX
5266   BFD_RELOC_XTENSA_SLOT6_OP
5267 ENUMX
5268   BFD_RELOC_XTENSA_SLOT7_OP
5269 ENUMX
5270   BFD_RELOC_XTENSA_SLOT8_OP
5271 ENUMX
5272   BFD_RELOC_XTENSA_SLOT9_OP
5273 ENUMX
5274   BFD_RELOC_XTENSA_SLOT10_OP
5275 ENUMX
5276   BFD_RELOC_XTENSA_SLOT11_OP
5277 ENUMX
5278   BFD_RELOC_XTENSA_SLOT12_OP
5279 ENUMX
5280   BFD_RELOC_XTENSA_SLOT13_OP
5281 ENUMX
5282   BFD_RELOC_XTENSA_SLOT14_OP
5283 ENUMDOC
5284   Generic Xtensa relocations for instruction operands.  Only the slot
5285   number is encoded in the relocation.  The relocation applies to the
5286   last PC-relative immediate operand, or if there are no PC-relative
5287   immediates, to the last immediate operand.
5288 ENUM
5289   BFD_RELOC_XTENSA_SLOT0_ALT
5290 ENUMX
5291   BFD_RELOC_XTENSA_SLOT1_ALT
5292 ENUMX
5293   BFD_RELOC_XTENSA_SLOT2_ALT
5294 ENUMX
5295   BFD_RELOC_XTENSA_SLOT3_ALT
5296 ENUMX
5297   BFD_RELOC_XTENSA_SLOT4_ALT
5298 ENUMX
5299   BFD_RELOC_XTENSA_SLOT5_ALT
5300 ENUMX
5301   BFD_RELOC_XTENSA_SLOT6_ALT
5302 ENUMX
5303   BFD_RELOC_XTENSA_SLOT7_ALT
5304 ENUMX
5305   BFD_RELOC_XTENSA_SLOT8_ALT
5306 ENUMX
5307   BFD_RELOC_XTENSA_SLOT9_ALT
5308 ENUMX
5309   BFD_RELOC_XTENSA_SLOT10_ALT
5310 ENUMX
5311   BFD_RELOC_XTENSA_SLOT11_ALT
5312 ENUMX
5313   BFD_RELOC_XTENSA_SLOT12_ALT
5314 ENUMX
5315   BFD_RELOC_XTENSA_SLOT13_ALT
5316 ENUMX
5317   BFD_RELOC_XTENSA_SLOT14_ALT
5318 ENUMDOC
5319   Alternate Xtensa relocations.  Only the slot is encoded in the
5320   relocation.  The meaning of these relocations is opcode-specific.
5321 ENUM
5322   BFD_RELOC_XTENSA_OP0
5323 ENUMX
5324   BFD_RELOC_XTENSA_OP1
5325 ENUMX
5326   BFD_RELOC_XTENSA_OP2
5327 ENUMDOC
5328   Xtensa relocations for backward compatibility.  These have all been
5329   replaced by BFD_RELOC_XTENSA_SLOT0_OP.
5330 ENUM
5331   BFD_RELOC_XTENSA_ASM_EXPAND
5332 ENUMDOC
5333   Xtensa relocation to mark that the assembler expanded the
5334   instructions from an original target.  The expansion size is
5335   encoded in the reloc size.
5336 ENUM
5337   BFD_RELOC_XTENSA_ASM_SIMPLIFY
5338 ENUMDOC
5339   Xtensa relocation to mark that the linker should simplify
5340   assembler-expanded instructions.  This is commonly used
5341   internally by the linker after analysis of a
5342   BFD_RELOC_XTENSA_ASM_EXPAND.
5343 ENUM
5344   BFD_RELOC_XTENSA_TLSDESC_FN
5345 ENUMX
5346   BFD_RELOC_XTENSA_TLSDESC_ARG
5347 ENUMX
5348   BFD_RELOC_XTENSA_TLS_DTPOFF
5349 ENUMX
5350   BFD_RELOC_XTENSA_TLS_TPOFF
5351 ENUMX
5352   BFD_RELOC_XTENSA_TLS_FUNC
5353 ENUMX
5354   BFD_RELOC_XTENSA_TLS_ARG
5355 ENUMX
5356   BFD_RELOC_XTENSA_TLS_CALL
5357 ENUMDOC
5358   Xtensa TLS relocations.
5359
5360 ENUM
5361   BFD_RELOC_Z80_DISP8
5362 ENUMDOC
5363   8 bit signed offset in (ix+d) or (iy+d).
5364
5365 ENUM
5366   BFD_RELOC_Z8K_DISP7
5367 ENUMDOC
5368   DJNZ offset.
5369 ENUM
5370   BFD_RELOC_Z8K_CALLR
5371 ENUMDOC
5372   CALR offset.
5373 ENUM
5374   BFD_RELOC_Z8K_IMM4L
5375 ENUMDOC
5376   4 bit value.
5377
5378 ENUM
5379    BFD_RELOC_LM32_CALL
5380 ENUMX
5381    BFD_RELOC_LM32_BRANCH
5382 ENUMX
5383    BFD_RELOC_LM32_16_GOT
5384 ENUMX
5385    BFD_RELOC_LM32_GOTOFF_HI16
5386 ENUMX
5387    BFD_RELOC_LM32_GOTOFF_LO16
5388 ENUMX
5389    BFD_RELOC_LM32_COPY
5390 ENUMX
5391    BFD_RELOC_LM32_GLOB_DAT
5392 ENUMX
5393    BFD_RELOC_LM32_JMP_SLOT
5394 ENUMX
5395    BFD_RELOC_LM32_RELATIVE
5396 ENUMDOC
5397  Lattice Mico32 relocations.
5398
5399 ENUM
5400   BFD_RELOC_MACH_O_SECTDIFF
5401 ENUMDOC
5402   Difference between two section addreses.  Must be followed by a
5403   BFD_RELOC_MACH_O_PAIR.
5404 ENUM
5405   BFD_RELOC_MACH_O_PAIR
5406 ENUMDOC
5407   Pair of relocation.  Contains the first symbol.
5408
5409 ENUM
5410   BFD_RELOC_MACH_O_X86_64_BRANCH32
5411 ENUMX
5412   BFD_RELOC_MACH_O_X86_64_BRANCH8
5413 ENUMDOC
5414   PCREL relocations.  They are marked as branch to create PLT entry if
5415   required.
5416 ENUM
5417   BFD_RELOC_MACH_O_X86_64_GOT
5418 ENUMDOC
5419   Used when referencing a GOT entry.
5420 ENUM
5421   BFD_RELOC_MACH_O_X86_64_GOT_LOAD
5422 ENUMDOC
5423   Used when loading a GOT entry with movq.  It is specially marked so that
5424   the linker could optimize the movq to a leaq if possible.
5425 ENUM
5426   BFD_RELOC_MACH_O_X86_64_SUBTRACTOR32
5427 ENUMDOC
5428   Symbol will be substracted.  Must be followed by a BFD_RELOC_64.
5429 ENUM
5430   BFD_RELOC_MACH_O_X86_64_SUBTRACTOR64
5431 ENUMDOC
5432   Symbol will be substracted.  Must be followed by a BFD_RELOC_64.
5433 ENUM
5434   BFD_RELOC_MACH_O_X86_64_PCREL32_1
5435 ENUMDOC
5436   Same as BFD_RELOC_32_PCREL but with an implicit -1 addend.
5437 ENUM
5438   BFD_RELOC_MACH_O_X86_64_PCREL32_2
5439 ENUMDOC
5440   Same as BFD_RELOC_32_PCREL but with an implicit -2 addend.
5441 ENUM
5442   BFD_RELOC_MACH_O_X86_64_PCREL32_4
5443 ENUMDOC
5444   Same as BFD_RELOC_32_PCREL but with an implicit -4 addend.
5445
5446 ENUM
5447   BFD_RELOC_MICROBLAZE_32_LO
5448 ENUMDOC
5449   This is a 32 bit reloc for the microblaze that stores the
5450   low 16 bits of a value
5451 ENUM
5452   BFD_RELOC_MICROBLAZE_32_LO_PCREL
5453 ENUMDOC
5454   This is a 32 bit pc-relative reloc for the microblaze that
5455   stores the low 16 bits of a value
5456 ENUM
5457   BFD_RELOC_MICROBLAZE_32_ROSDA
5458 ENUMDOC
5459   This is a 32 bit reloc for the microblaze that stores a
5460   value relative to the read-only small data area anchor
5461 ENUM
5462   BFD_RELOC_MICROBLAZE_32_RWSDA
5463 ENUMDOC
5464   This is a 32 bit reloc for the microblaze that stores a
5465   value relative to the read-write small data area anchor
5466 ENUM
5467   BFD_RELOC_MICROBLAZE_32_SYM_OP_SYM
5468 ENUMDOC
5469   This is a 32 bit reloc for the microblaze to handle
5470   expressions of the form "Symbol Op Symbol"
5471 ENUM
5472   BFD_RELOC_MICROBLAZE_64_NONE
5473 ENUMDOC
5474   This is a 64 bit reloc that stores the 32 bit pc relative
5475   value in two words (with an imm instruction).  No relocation is
5476   done here - only used for relaxing
5477 ENUM
5478   BFD_RELOC_MICROBLAZE_64_GOTPC
5479 ENUMDOC
5480   This is a 64 bit reloc that stores the 32 bit pc relative
5481   value in two words (with an imm instruction).  The relocation is
5482   PC-relative GOT offset
5483 ENUM
5484   BFD_RELOC_MICROBLAZE_64_GOT
5485 ENUMDOC
5486   This is a 64 bit reloc that stores the 32 bit pc relative
5487   value in two words (with an imm instruction).  The relocation is
5488   GOT offset
5489 ENUM
5490   BFD_RELOC_MICROBLAZE_64_PLT
5491 ENUMDOC
5492   This is a 64 bit reloc that stores the 32 bit pc relative
5493   value in two words (with an imm instruction).  The relocation is
5494   PC-relative offset into PLT
5495 ENUM
5496   BFD_RELOC_MICROBLAZE_64_GOTOFF
5497 ENUMDOC
5498   This is a 64 bit reloc that stores the 32 bit GOT relative
5499   value in two words (with an imm instruction).  The relocation is
5500   relative offset from _GLOBAL_OFFSET_TABLE_
5501 ENUM
5502   BFD_RELOC_MICROBLAZE_32_GOTOFF
5503 ENUMDOC
5504   This is a 32 bit reloc that stores the 32 bit GOT relative
5505   value in a word.  The relocation is relative offset from
5506   _GLOBAL_OFFSET_TABLE_
5507 ENUM
5508   BFD_RELOC_MICROBLAZE_COPY
5509 ENUMDOC
5510   This is used to tell the dynamic linker to copy the value out of
5511   the dynamic object into the runtime process image.
5512
5513
5514 ENDSENUM
5515   BFD_RELOC_UNUSED
5516 CODE_FRAGMENT
5517 .
5518 .typedef enum bfd_reloc_code_real bfd_reloc_code_real_type;
5519 */
5520
5521 /*
5522 FUNCTION
5523         bfd_reloc_type_lookup
5524         bfd_reloc_name_lookup
5525
5526 SYNOPSIS
5527         reloc_howto_type *bfd_reloc_type_lookup
5528           (bfd *abfd, bfd_reloc_code_real_type code);
5529         reloc_howto_type *bfd_reloc_name_lookup
5530           (bfd *abfd, const char *reloc_name);
5531
5532 DESCRIPTION
5533         Return a pointer to a howto structure which, when
5534         invoked, will perform the relocation @var{code} on data from the
5535         architecture noted.
5536
5537 */
5538
5539 reloc_howto_type *
5540 bfd_reloc_type_lookup (bfd *abfd, bfd_reloc_code_real_type code)
5541 {
5542   return BFD_SEND (abfd, reloc_type_lookup, (abfd, code));
5543 }
5544
5545 reloc_howto_type *
5546 bfd_reloc_name_lookup (bfd *abfd, const char *reloc_name)
5547 {
5548   return BFD_SEND (abfd, reloc_name_lookup, (abfd, reloc_name));
5549 }
5550
5551 static reloc_howto_type bfd_howto_32 =
5552 HOWTO (0, 00, 2, 32, FALSE, 0, complain_overflow_dont, 0, "VRT32", FALSE, 0xffffffff, 0xffffffff, TRUE);
5553
5554 /*
5555 INTERNAL_FUNCTION
5556         bfd_default_reloc_type_lookup
5557
5558 SYNOPSIS
5559         reloc_howto_type *bfd_default_reloc_type_lookup
5560           (bfd *abfd, bfd_reloc_code_real_type  code);
5561
5562 DESCRIPTION
5563         Provides a default relocation lookup routine for any architecture.
5564
5565 */
5566
5567 reloc_howto_type *
5568 bfd_default_reloc_type_lookup (bfd *abfd, bfd_reloc_code_real_type code)
5569 {
5570   switch (code)
5571     {
5572     case BFD_RELOC_CTOR:
5573       /* The type of reloc used in a ctor, which will be as wide as the
5574          address - so either a 64, 32, or 16 bitter.  */
5575       switch (bfd_get_arch_info (abfd)->bits_per_address)
5576         {
5577         case 64:
5578           BFD_FAIL ();
5579         case 32:
5580           return &bfd_howto_32;
5581         case 16:
5582           BFD_FAIL ();
5583         default:
5584           BFD_FAIL ();
5585         }
5586     default:
5587       BFD_FAIL ();
5588     }
5589   return NULL;
5590 }
5591
5592 /*
5593 FUNCTION
5594         bfd_get_reloc_code_name
5595
5596 SYNOPSIS
5597         const char *bfd_get_reloc_code_name (bfd_reloc_code_real_type code);
5598
5599 DESCRIPTION
5600         Provides a printable name for the supplied relocation code.
5601         Useful mainly for printing error messages.
5602 */
5603
5604 const char *
5605 bfd_get_reloc_code_name (bfd_reloc_code_real_type code)
5606 {
5607   if (code > BFD_RELOC_UNUSED)
5608     return 0;
5609   return bfd_reloc_code_real_names[code];
5610 }
5611
5612 /*
5613 INTERNAL_FUNCTION
5614         bfd_generic_relax_section
5615
5616 SYNOPSIS
5617         bfd_boolean bfd_generic_relax_section
5618           (bfd *abfd,
5619            asection *section,
5620            struct bfd_link_info *,
5621            bfd_boolean *);
5622
5623 DESCRIPTION
5624         Provides default handling for relaxing for back ends which
5625         don't do relaxing.
5626 */
5627
5628 bfd_boolean
5629 bfd_generic_relax_section (bfd *abfd ATTRIBUTE_UNUSED,
5630                            asection *section ATTRIBUTE_UNUSED,
5631                            struct bfd_link_info *link_info ATTRIBUTE_UNUSED,
5632                            bfd_boolean *again)
5633 {
5634   if (link_info->relocatable)
5635     (*link_info->callbacks->einfo)
5636       (_("%P%F: --relax and -r may not be used together\n"));
5637
5638   *again = FALSE;
5639   return TRUE;
5640 }
5641
5642 /*
5643 INTERNAL_FUNCTION
5644         bfd_generic_gc_sections
5645
5646 SYNOPSIS
5647         bfd_boolean bfd_generic_gc_sections
5648           (bfd *, struct bfd_link_info *);
5649
5650 DESCRIPTION
5651         Provides default handling for relaxing for back ends which
5652         don't do section gc -- i.e., does nothing.
5653 */
5654
5655 bfd_boolean
5656 bfd_generic_gc_sections (bfd *abfd ATTRIBUTE_UNUSED,
5657                          struct bfd_link_info *info ATTRIBUTE_UNUSED)
5658 {
5659   return TRUE;
5660 }
5661
5662 /*
5663 INTERNAL_FUNCTION
5664         bfd_generic_merge_sections
5665
5666 SYNOPSIS
5667         bfd_boolean bfd_generic_merge_sections
5668           (bfd *, struct bfd_link_info *);
5669
5670 DESCRIPTION
5671         Provides default handling for SEC_MERGE section merging for back ends
5672         which don't have SEC_MERGE support -- i.e., does nothing.
5673 */
5674
5675 bfd_boolean
5676 bfd_generic_merge_sections (bfd *abfd ATTRIBUTE_UNUSED,
5677                             struct bfd_link_info *link_info ATTRIBUTE_UNUSED)
5678 {
5679   return TRUE;
5680 }
5681
5682 /*
5683 INTERNAL_FUNCTION
5684         bfd_generic_get_relocated_section_contents
5685
5686 SYNOPSIS
5687         bfd_byte *bfd_generic_get_relocated_section_contents
5688           (bfd *abfd,
5689            struct bfd_link_info *link_info,
5690            struct bfd_link_order *link_order,
5691            bfd_byte *data,
5692            bfd_boolean relocatable,
5693            asymbol **symbols);
5694
5695 DESCRIPTION
5696         Provides default handling of relocation effort for back ends
5697         which can't be bothered to do it efficiently.
5698
5699 */
5700
5701 bfd_byte *
5702 bfd_generic_get_relocated_section_contents (bfd *abfd,
5703                                             struct bfd_link_info *link_info,
5704                                             struct bfd_link_order *link_order,
5705                                             bfd_byte *data,
5706                                             bfd_boolean relocatable,
5707                                             asymbol **symbols)
5708 {
5709   bfd *input_bfd = link_order->u.indirect.section->owner;
5710   asection *input_section = link_order->u.indirect.section;
5711   long reloc_size;
5712   arelent **reloc_vector;
5713   long reloc_count;
5714   bfd_size_type sz;
5715
5716   reloc_size = bfd_get_reloc_upper_bound (input_bfd, input_section);
5717   if (reloc_size < 0)
5718     return NULL;
5719
5720   /* Read in the section.  */
5721   sz = input_section->rawsize ? input_section->rawsize : input_section->size;
5722   if (!bfd_get_section_contents (input_bfd, input_section, data, 0, sz))
5723     return NULL;
5724
5725   if (reloc_size == 0)
5726     return data;
5727
5728   reloc_vector = (arelent **) bfd_malloc (reloc_size);
5729   if (reloc_vector == NULL)
5730     return NULL;
5731
5732   reloc_count = bfd_canonicalize_reloc (input_bfd,
5733                                         input_section,
5734                                         reloc_vector,
5735                                         symbols);
5736   if (reloc_count < 0)
5737     goto error_return;
5738
5739   if (reloc_count > 0)
5740     {
5741       arelent **parent;
5742       for (parent = reloc_vector; *parent != NULL; parent++)
5743         {
5744           char *error_message = NULL;
5745           asymbol *symbol;
5746           bfd_reloc_status_type r;
5747
5748           symbol = *(*parent)->sym_ptr_ptr;
5749           if (symbol->section && elf_discarded_section (symbol->section))
5750             {
5751               bfd_byte *p;
5752               static reloc_howto_type none_howto
5753                 = HOWTO (0, 0, 0, 0, FALSE, 0, complain_overflow_dont, NULL,
5754                          "unused", FALSE, 0, 0, FALSE);
5755
5756               p = data + (*parent)->address * bfd_octets_per_byte (input_bfd);
5757               _bfd_clear_contents ((*parent)->howto, input_bfd, p);
5758               (*parent)->sym_ptr_ptr = bfd_abs_section.symbol_ptr_ptr;
5759               (*parent)->addend = 0;
5760               (*parent)->howto = &none_howto;
5761               r = bfd_reloc_ok;
5762             }
5763           else
5764             r = bfd_perform_relocation (input_bfd,
5765                                         *parent,
5766                                         data,
5767                                         input_section,
5768                                         relocatable ? abfd : NULL,
5769                                         &error_message);
5770
5771           if (relocatable)
5772             {
5773               asection *os = input_section->output_section;
5774
5775               /* A partial link, so keep the relocs.  */
5776               os->orelocation[os->reloc_count] = *parent;
5777               os->reloc_count++;
5778             }
5779
5780           if (r != bfd_reloc_ok)
5781             {
5782               switch (r)
5783                 {
5784                 case bfd_reloc_undefined:
5785                   if (!((*link_info->callbacks->undefined_symbol)
5786                         (link_info, bfd_asymbol_name (*(*parent)->sym_ptr_ptr),
5787                          input_bfd, input_section, (*parent)->address,
5788                          TRUE)))
5789                     goto error_return;
5790                   break;
5791                 case bfd_reloc_dangerous:
5792                   BFD_ASSERT (error_message != NULL);
5793                   if (!((*link_info->callbacks->reloc_dangerous)
5794                         (link_info, error_message, input_bfd, input_section,
5795                          (*parent)->address)))
5796                     goto error_return;
5797                   break;
5798                 case bfd_reloc_overflow:
5799                   if (!((*link_info->callbacks->reloc_overflow)
5800                         (link_info, NULL,
5801                          bfd_asymbol_name (*(*parent)->sym_ptr_ptr),
5802                          (*parent)->howto->name, (*parent)->addend,
5803                          input_bfd, input_section, (*parent)->address)))
5804                     goto error_return;
5805                   break;
5806                 case bfd_reloc_outofrange:
5807                 default:
5808                   abort ();
5809                   break;
5810                 }
5811
5812             }
5813         }
5814     }
5815
5816   free (reloc_vector);
5817   return data;
5818
5819 error_return:
5820   free (reloc_vector);
5821   return NULL;
5822 }