1 2005-04-14 Mark Kettenis <kettenis@gnu.org>
3 * configure.tgt: Set emulation for mips-*-openbsd*.
4 Remove broken mips-dec-openbsd* config.
5 * configure.in: Set default ABI for mips64-*-openbsd*.
6 * configure: Regenerate.
8 2005-04-14 Maciej W. Rozycki <macro@linux-mips.org>
10 * config/tc-mips.c (macro) [ldd_std]: Don't attempt the GP
11 optimization for constant addresses.
13 2005-04-14 Nick Clifton <nickc@redhat.com>
15 * as.c (main): Move parse_args before symbol_begin and frag_init
16 so that the hash table size can be set before it is used.
17 * hash.c: Use an unsigned long type for the size of the hash
19 * hash.h (set_gas_hash_table_size): Update the prototype.
21 2005-04-14 Alan Modra <amodra@bigpond.net.au>
23 * Makefile.am (NO_WERROR): Define. Use instead of -Wno-error.
24 * acinclude.m4: Include ../bfd/warning.m4.
25 * configure.in: Invoke AM_BINUTILS_WARNINGS.
26 * Makefile.in: Regenerate.
27 * configure: Regenerate.
28 * doc/Makefile.in: Regenerate.
30 2005-04-13 Maciej W. Rozycki <macro@linux-mips.org>
32 * config/tc-mips.c (IS_ZEXT_32BIT_NUM): New macro.
33 (normalize_address_expr): New function to sign-extend address
34 offsets that fit into 32 bits in 32-bit mode.
35 (macro_build_ldst_constoffset): Use normalize_address_expr()
36 instead of a handcoded sequence.
37 (load_register): Likewise. Report oversized numbers in a useful
39 (macro) [ld_st, ldd_std]: Reject all oversized offsets, not only
40 for constant addresses. Report oversized numbers in a useful way.
41 (mips_ip): Use normalize_address_expr() for addresses.
43 2005-04-12 Mark Kettenis <kettenis@gnu.org>
45 * config/tc-i386.c (output_insn): Handle VIA PadLock instructions
46 similar to other instructions now that they're marked as ImmExt.
48 2005-04-12 Nick Clifton <nickc@redhat.com>
50 * hash.c (DEFAULT_SIZE): Delete. Replace with:
51 (gas_hash_table_size): New static variable.
52 (set_gas_hash_table_size): New function: Records a requested size
54 (get_gas_hash_table_size): New function: Return a prime number
55 near the requested size of the hash table.
56 (hash_new): Use get_gas_hash_table_size.
57 * hash.h: Add a prototype for set_gas_hash_table_size.
58 * as.c (show_usage): Add description of new switches: --hash-size
59 and --reduce-memory-overheads.
60 (option_values): Add OPTION_HASH_TABLE_SIZE and
61 OPTION_REDUCE_MEMORY_OVERHEADS.
62 (std_longpopts): Add entries for the new options.
63 (parse_args): Handle the new options.
64 * Makefile.am: Add a dependency of as.c on hash.h.
65 * Makefile.in: Regenerate.
66 * doc/as.texinfo: Document the new switches.
67 * NEWS: Mention the new switches.
69 2005-04-12 Nick Clifton <nickc@redhat.com>
72 * config/tc-hppa.c (pre_defined_registers): Fix %farg[0-3]
75 2005-04-12 Alan Modra <amodra@bigpond.net.au>
77 * Makefile.am: Run "make dep-am".
78 * Makefile.in: Regenerate.
80 2005-04-11 Sterling Augustine <sterling@tensilica.com>
81 Bob Wilson <bob.wilson@acm.org>
83 * config/tc-xtensa.c (check_t1_t2_reads_and_writes): Fix typo.
85 2005-04-11 Mark Kettenis <kettenis@gnu.org>
87 * configure.tgt (generic_target): Add support for OpenBSD/i386 ELF.
89 2005-04-11 Jan Beulich <jbeulich@novell.com>
91 * NEWS: Mention these changes and their effects.
92 * macro.c (get_token): Use is_name_beginner/is_part_of_name/
94 (check_macro): Likewise.
95 (buffer_and_nest): Likewise. Permit multiple labels. Don't discard
96 labels together with the closing pseudo-op.
97 (macro_expand_body): Adjust comment. Range-check input before use.
98 Adjust mis-spelled diagnostic. Use is_name_beginner.
99 * read.c (try_macro): New.
100 (read_a_source_file): New static variable last_eol. Don't list
101 macro expansion lines more than once. Call try_macro.
102 (s_macro): Set section of line_label to absolute instead of undefined.
103 * doc/as.texinfo: Add information on the caveats of these changes.
105 2005-04-11 Alan Modra <amodra@bigpond.net.au>
107 * symbols.c (symbol_X_add_number): Change return type to "offsetT *".
108 * symbols.h (symbol_X_add_number): Update prototype.
110 2005-04-10 Eric Christopher <echristo@redhat.com>
112 * symbols.c (symbol_X_add_number): Fix warning.
114 2005-04-10 H.J. Lu <hongjiu.lu@intel.com>
116 * config/tc-m68k.c (md_begin): Support 64bit host.
117 (get_num): Support 64bit BFD on 32bit host.
119 2005-04-10 H.J. Lu <hongjiu.lu@intel.com>
121 * config/tc-mips.c (md_apply_fix3): Fix typos in BFD_RELOC_64.
123 2005-04-09 Alan Modra <amodra@bigpond.net.au>
125 * read.c (assign_symbol): Remove const from parm. Fix xcalloc
126 call. Don't do the COFF hacks for multi-emulation gas. Move
127 demand_empty_rest_of_line back to caller.
128 (s_set, equals): demand_empty_rest_of_line here.
131 * as.h (rs_dummy): Define.
132 * symbols.c (symbol_X_add_number): New function.
133 * symbols.h (symbol_X_add_number): Declare.
134 * stabs.c (aout_process_stab): Tidy symbol frag setting.
135 * read.c (assign_symbol): New function, split out from s_set.
136 Use symbol_find_or_make. Leave fr_type of dummy frag as rs_dummy.
137 Fix COFF hacks for multi-emulation gas.
138 (s_set): Call assign_symbol. Remove "register" keyword.
139 (set_zero_frag): New function.
140 (pseudo_set): Always check for assignment to section syms.
141 Always set segment and frag of symbol, and likewise extern for
142 aout/bout. Handle assignment of sym=sym+/-const specially. Don't
143 special case exp.X_add_number non-zero for O_symbol expressions.
144 (equals): Use assign_symbol.
146 2005-04-08 Bob Wilson <bob.wilson@acm.org>
148 * config/tc-xtensa.c (xtensa_create_xproperty_segments): Skip
151 2005-04-06 H.J. Lu <hongjiu.lu@intel.com>
153 * config/tc-i386.c (tc_gen_reloc): Don't turn
154 BFD_RELOC_X86_64_32S into BFD_RELOC_32.
156 2005-04-06 Nick Clifton <nickc@redhat.com>
158 * po/rw.po: New translation: Kinyarwanda
159 * configure.in (ALL_LINGUAS): Add rw
160 * configure: Regenerate.
162 2005-04-05 Sterling Augustine <sterling@tensilica.com>
163 Bob Wilson <bob.wilson@acm.org>
165 * config/tc-xtensa.c (branch_align_power): New.
166 (xtensa_find_unaligned_branch_targets, get_aligned_diff,
167 future_alignment_required): Use branch_align_power to check section
168 alignment as well as xtensa_fetch_width when aligning branch targets.
170 2005-04-05 Bob Wilson <bob.wilson@acm.org>
172 * config/tc-xtensa.c: Warning fixes throughout.
173 (xtensa_fetch_width): Change to unsigned.
174 (assemble_nop, xtensa_find_unaligned_branch_targets,
175 xtensa_find_unaligned_loops, xg_assemble_vliw_tokens,
176 is_narrow_branch_guaranteed_in_range, xtensa_fix_close_loop_end_frags,
177 min_bytes_to_other_loop_end, unrelaxed_frag_min_size,
178 unrelaxed_frag_max_size, xtensa_fix_short_loop_frags,
179 count_insns_to_loop_end, unrelaxed_frag_min_insn_count,
180 get_text_align_max_fill_size, get_text_align_nop_count,
181 get_text_align_nth_nop_size, get_noop_aligned_address,
182 get_aligned_diff, convert_frag_align_next_opcode,
183 convert_frag_immed_finish_loop, xtensa_create_property_segments,
184 xtensa_create_xproperty_segments, xt_block_aligned_size): Clean up
185 types, avoiding size_t and using offsetT and addressT appropriately.
186 (get_text_align_power): Clean up types. Avoid incorrect bound.
187 (get_text_align_fill_size): Clean up types. Restructure for clarity.
189 2005-04-04 H.J. Lu <hongjiu.lu@intel.com>
191 * config/tc-ia64.c (start_unwind_section): Undo the change
193 (generate_unwind_image, dot_endp): Likewise.
195 2005-04-01 David Mosberger <davidm@hpl.hp.com>
197 * config/tc-ia64.c (ia64_handle_align): Move le_nop and
198 le_nop_stop arrays and initializers to file scope.
199 (md_begin): When generating code for anything other than
200 Itanium 1, use MMI instead of MFI NOP bundles as a filler.
202 2005-04-01 Jan Beulich <jbeulich@novell.com>
204 * config/tc-i386.c (output_imm): Also set sign flag for 64-bit push
207 2005-04-01 Jan-Benedict Glaw <jbglaw@lug-owl.de>
209 * NEWS: Mention [fdgh]_floating.
210 * config/atof-vax.c: Fix some whitespace.
211 * config/tc-vax.c (md_pseudo_table): Add "[fdgh]_floating".
213 2005-04-01 Nick Clifton <nickc@redhat.com>
215 * configure.in: Add a check for <unistd.h> providing a prototype
216 for getopt() which is compatible with the one in
217 include/getopt.h. If so then define HAVE_DECL_GETOPT.
218 * configure: Regenerate.
219 * config.in (HAVE_DECL_GETOPT): Add.
221 2005-04-01 Jan Beulich <jbeulich@novell.com>
223 * config/tc-i386.c (s_bss): Call obj_elf_section_change_hook.
225 2005-04-01 Jan Beulich <jbeulich@novell.com>
227 * config/tc-i386.c (md_apply_fix3): Also handle BFD_RELOC_X86_64_32S.
228 (tc_gen_reloc): Handle BFD_RELOC_X86_64_32S in the default case.
230 2005-03-30 Julian Brown <julian@codesourcery.com>
232 * config/tc-arm.c (arm_adjust_symtab): Rename
233 bfd_elf32_is_arm_mapping_symbol_name to bfd_is_arm_mapping_symbol_name.
235 2005-03-30 Julian Brown <julian@codesourcery.com>
237 * config/tc-arm.c (mapping_state): Change documentation in function
238 comment to cross-reference spec instead. Change type of mapping symbols
240 (arm_adjust_symtab): Don't change type of mapping symbols here.
242 2005-03-30 Aaron W. LaFramboise <aaron98wiridge9@aaronwl.com>
244 * as.h [NEED_DECLARATION_FFS] (ffs): Prototype and alphabetize.
245 * config.in: Regenerate.
246 * configure: Regenerate.
247 * configure.in: Check for ffs decl and alphabetize.
249 2005-03-29 Daniel Jacobowitz <dan@codesourcery.com>
250 Phil Blundell <philb@gnu.org>
252 * config/tc-arm.c (arm_parse_reloc): Add TLS relocations.
253 (md_apply_fix3): Mark TLS symbols.
254 (tc_gen_reloc): Handle TLS relocations.
255 (arm_fix_adjustable): Ignore TLS relocations.
256 (s_arm_elf_cons): Support expressions after decorated symbols.
258 2005-03-29 Julian Brown <julian@codesourcery.com>
260 * config/tc-arm.c (marked_pr_dependency): New bitmap, bit N indicates
261 whether personality routine index N has been output for this section.
262 (mapping_state): tc_segment_info_data now struct not enum.
263 (arm_elf_change_section): Likewise, and marked_pr_dependency is now
264 handled on section change.
265 (create_unwind_entry): Previous code to output dependency removed.
266 (s_arm_unwind_fnend): Output dependency if it hasn't been done already
268 * config/tc-arm.h (TC_SEGMENT_INFO_TYPE): Redefined as struct
269 arm_segment_info_type.
270 (arm_segment_info_type): New struct.
271 * testsuite/gas/arm/unwind.d: Update expected output.
273 2005-03-28 Sterling Augustine <sterling@tensilica.com>
274 Bob Wilson <bob.wilson@acm.org>
276 * config/tc-xtensa.c (do_align_targets): Update comment.
277 (xtensa_frob_label): Compute "freq" before possibly switching frags.
278 Insert a LOOP_END frag before every loop target, and do not overload
279 DESIRE_ALIGN_IF_TARGET frags with loop end information.
280 (xg_assemble_vliw_tokens): Use do_align_targets.
281 (xtensa_fix_target_frags): Remove code to convert a
282 DESIRE_ALIGN_IF_TARGET frag to a LOOP_END frag when there is a
283 negatable branch at the end of a loop.
284 (frag_can_negate_branch): Delete.
286 2005-03-28 David Mosberger <davidm@hpl.hp.com>
287 H.J. Lu <hongjiu.lu@intel.com>
290 NEWS: Mention "-mtune=[itanium1|itanium2]".
292 * config/tc-ia64.c (md): Add tune.
293 (md_parse_option): Accepted "-mtune=[itanium1|itanium2]".
294 (md_show_usage): Add "-mtune=[itanium1|itanium2]".
295 (extra_goodness): Prefer M- and I-unit NOPs for itanium2. F and
296 B unit NOPs are discouraged for McKinley-derived cores.
297 (md_begin): Don't hardcode the "extra_goodness()" function in
299 (ia64_init): Set md.tune to itanium2.
301 * doc/as.texinfo: Add -mtune=[itanium1|itanium2]".
302 * doc/c-ia64.texi: Likewise.
304 2005-03-27 Ian Lance Taylor <ian@airs.com>
306 * config/obj-coff.c (coff_frob_symbol): When crashing because of a
307 bad C_EFCN symbol, print its name.
309 2005-03-25 Bob Wilson <bob.wilson@acm.org>
311 * config/tc-xtensa.c (use_longcalls): Delete.
312 (xg_symbolic_immeds_fit): Check for direct calls and return TRUE if
313 the use_longcalls flag is set. Do this before checking the segment.
314 (xg_expand_assembly_insn): Rearrange to use new do_expand flag. Never
315 expand direct calls at this point.
316 (xtensa_set_frag_assembly_state): Set use_longcalls flag.
317 (xtensa_find_unmarked_state_frags): Likewise.
318 (md_assemble): Do not disable longcalls by setting is_specific_opcode.
319 (xg_assemble_vliw_tokens): Switch frags when use_longcalls changes.
320 (convert_frag_immed): Remove unnecessary check of is_specific_opcode.
321 * config/tc-xtensa.h (xtensa_frag_type): Add use_longcalls flag.
323 2005-03-25 Hans-Peter Nilsson <hp@bitrange.com>
325 * config/tc-mmix.c, config/tc-mmix.h: Convert to ISO C90.
327 2005-03-25 Hans-Peter Nilsson <hp@axis.com>
329 * config/tc-cris.h: Convert to ISO C90.
330 * config/tc-cris.c: Ditto.
331 (md_estimate_size_before_relax): Remove obsolete comment for
332 parameter "segment_type".
333 (md_begin): Document reason for cast of hash_insert argument.
334 (md_atof): Correct type of parameter "type".
336 2005-03-24 Nick Clifton <nickc@redhat.com>
338 * write.h (bit_fix_new): Remove redundant prototype.
339 * config/atof-ieee.c: Convert to ISO-C90 and fix formatting.
340 * config/obj-aout.c: Convert to ISO-C90 and fix formatting.
341 * config/obj-aout.h: Convert to ISO-C90 and fix formatting.
342 * config/obj-bout.c: Convert to ISO-C90 and fix formatting.
343 * config/obj-bout.h: Convert to ISO-C90 and fix formatting.
344 * config/obj-ecoff.c: Convert to ISO-C90 and fix formatting.
345 * config/obj-ecoff.h: Convert to ISO-C90 and fix formatting.
346 * config/obj-som.c: Convert to ISO-C90 and fix formatting.
347 * config/obj-som.h: Convert to ISO-C90 and fix formatting.
348 * config/tc-a29k.c: Convert to ISO-C90 and fix formatting.
349 * config/tc-a29k.h: Convert to ISO-C90 and fix formatting.
350 * config/tc-alpha.c: Convert to ISO-C90 and fix formatting.
351 * config/tc-alpha.h: Convert to ISO-C90 and fix formatting.
352 * config/tc-arc.c: Convert to ISO-C90 and fix formatting.
353 * config/tc-arc.h: Convert to ISO-C90 and fix formatting.
354 * config/tc-d10v.c: Convert to ISO-C90 and fix formatting.
355 * config/tc-d10v.h: Convert to ISO-C90 and fix formatting.
356 * config/tc-d30v.c: Convert to ISO-C90 and fix formatting.
357 * config/tc-d30v.h: Convert to ISO-C90 and fix formatting.
358 * config/tc-dlx.c: Convert to ISO-C90 and fix formatting.
359 * config/tc-dlx.h: Convert to ISO-C90 and fix formatting.
360 * config/tc-fr30.c: Convert to ISO-C90 and fix formatting.
361 * config/tc-fr30.h: Convert to ISO-C90 and fix formatting.
362 * config/tc-h8500.c: Convert to ISO-C90 and fix formatting.
363 * config/tc-h8500.h: Convert to ISO-C90 and fix formatting.
364 * config/tc-i370.c: Convert to ISO-C90 and fix formatting.
365 * config/tc-i370.h: Convert to ISO-C90 and fix formatting.
366 * config/tc-i960.c: Convert to ISO-C90 and fix formatting.
367 * config/tc-ip2k.c: Convert to ISO-C90 and fix formatting.
368 * config/tc-ip2k.h: Convert to ISO-C90 and fix formatting.
369 * config/tc-m32r.c: Convert to ISO-C90 and fix formatting.
370 * config/tc-m32r.h: Convert to ISO-C90 and fix formatting.
371 * config/tc-m88k.c: Convert to ISO-C90 and fix formatting.
372 * config/tc-m88k.h: Convert to ISO-C90 and fix formatting.
373 * config/tc-mcore.c: Convert to ISO-C90 and fix formatting.
374 * config/tc-mcore.h: Convert to ISO-C90 and fix formatting.
375 * config/tc-mn10200.c: Convert to ISO-C90 and fix formatting.
376 * config/tc-ns32k.c: Convert to ISO-C90 and fix formatting.
377 * config/tc-ns32k.h: Convert to ISO-C90 and fix formatting.
378 * config/tc-openrisc.c: Convert to ISO-C90 and fix formatting.
379 * config/tc-openrisc.h: Convert to ISO-C90 and fix formatting.
380 * config/tc-or32.c: Convert to ISO-C90 and fix formatting.
381 * config/tc-or32.h: Convert to ISO-C90 and fix formatting.
382 * config/tc-pdp11.h: Convert to ISO-C90 and fix formatting.
383 * config/tc-pj.c: Convert to ISO-C90 and fix formatting.
384 * config/tc-pj.h: Convert to ISO-C90 and fix formatting.
385 * config/tc-tahoe.c: Convert to ISO-C90 and fix formatting.
386 * config/tc-tic80.c: Convert to ISO-C90 and fix formatting.
387 * config/tc-tic80.h: Convert to ISO-C90 and fix formatting.
388 * config/tc-v850.c: Convert to ISO-C90 and fix formatting.
389 * config/tc-v850.h: Convert to ISO-C90 and fix formatting.
390 * config/tc-w65.c: Convert to ISO-C90 and fix formatting.
391 * config/tc-w65.h: Convert to ISO-C90 and fix formatting.
392 * config/tc-xstormy16.c: Convert to ISO-C90 and fix formatting.
393 * config/tc-xstormy16.h: Convert to ISO-C90 and fix formatting.
395 2005-03-23 Jim Blandy <jimb@redhat.com>
397 * config/tc-arm.c (arm_adjust_symtab): Fetch elf_sym's binding
400 2005-03-23 Mike Frysinger <vapier@gentoo.org>
401 Nick Clifton <nickc@redhat.com>
403 * configure.tgt: Accept any C library to accompany a GNU Linux
404 implementation, not just the GNU C library.
405 * configure.in: Likewise.
406 * configure: Regenerate.
408 2005-03-23 Nick Clifton <nickc@redhat.com>
410 * config/tc-tic30.c: Convert to ISO C90 formatting.
411 * config/tc-tic30.h: Convert to ISO C90 formatting.
412 * config/tc-pdp11.c: Convert to ISO C90 formatting.
413 * config/atof-vax.c: Convert to ISO C90 formatting.
415 2005-03-21 Maciej W. Rozycki <macro@mips.com>
417 * config/tc-mips.c (mips_frob_file): Sort BFD_RELOC_MIPS16_LO16
418 relocations correctly as well.
419 (mips_fix_adjustable): Don't make BFD_RELOC_MIPS16_LO16
420 relocations in mergeable sections section-relative either.
422 2005-03-21 Bob Wilson <bob.wilson@acm.org>
424 * config/tc-xtensa.c (md_apply_fix3): Recognize XTENSA_PLT relocations.
426 2005-03-21 Nick Clifton <nickc@redhat.com>
428 * config/tc-sh.c (sh_elf_final_processing): Fix compile time
429 warning by providing a prototype for sh_symbian_find_elf_flags.
431 * cgen.c (gas_cgen_parse_operand): Fix typo introduced by
434 2005-03-21 Alan Modra <amodra@bigpond.net.au>
436 * configure.tgt: Handle setting of bfd_gas for fmt=multi targets
437 along with other formats that set bfd_gas. Remove unnecessary
438 setting of bfd_gas. Delete strongarm cases in generic_target
441 2005-03-21 Alan Modra <amodra@bigpond.net.au>
444 * config/tc-m68k.c (TRUNC, SEXT): Define.
445 (issbyte, isubyte, issword, isuword, isbyte, isword): Use the above.
446 (m68k_ip): Truncate or sign extend expressions as appropriate.
448 (md_apply_fix3): Use SEXT.
450 2005-03-21 Alan Modra <amodra@bigpond.net.au>
452 * Makefile.am (OBJ_FORMAT_CFILES): Prune config/obj-vms.c.
453 (OBJ_FORMAT_HFILES): Prune config/obj-vms.h.
454 (obj-vms.o): Delete rule.
456 * Makefile.in: Regenerate.
457 * aclocal.m4: Regenerate.
458 * doc/Makefile.in: Regenerate.
459 * po/POTFILES.in: Regenerate.
461 2005-03-18 C Jaiprakash <cjaiprakash@noida.hcltech.com>
463 * config/tc-m68k.c (m68k_elf_final_processing): Set file specific
464 flag for coldfire v4e.
466 2005-03-17 Bob Wilson <bob.wilson@acm.org>
468 * config/tc-xtensa.c (xg_apply_tentative_value): Rename to
469 xg_apply_fix_value and return a value to indicate success.
470 (md_pcrel_from): Skip check of fx_done. Return 0 if not PC-relative.
471 (xtensa_force_relocation): Remove checks for VTABLE relocs.
472 (xtensa_validate_fix_sub): New.
473 (xtensa_fix_adjustable): Remove check for external or weak symbols.
474 (tc_gen_reloc): Move code to handle difference of symbols and code to
475 apply tentative fix values to ...
476 (md_apply_fix3): ...here. Enable standard overflow checks for simple
477 8, 16, and 32 bit relocations. Apply fixes for slot-specific
478 relocations when linkrelax flag is not set.
479 * config/tc-xtensa.h (xtensa_validate_fix_sub): Add prototype.
480 (TC_FORCE_RELOCATION_SUB_SAME, TC_VALIDATE_FIX_SUB): Define.
482 2005-03-17 Jan Beulich <jbeulich@novell.com>
484 * config/tc-i386.c (i386_scale): Beautify error message.
485 (Intel syntax comments): Update.
486 (struct intel_parser_s): Add fields in_offset, in_bracket, and
488 (intel_e04_1, intel_e05_1, intel_e05_1, intel_e09_1, intel_e10_1):
490 (intel_bracket_expr): Declare.
491 (i386_intel_operand): Initialize new intel_parser fields. Wrap most
492 of the function body in a loop allowing to split an operand into two.
493 Replace calls to malloc and checks of it returning non-NULL with
494 calls to xmalloc/xstrdup.
495 (intel_expr): SHORT no longer handled here. Add comment indicating
496 comparison ops need implementation.
497 (intel_e04, intel_e04_1): Combine, replace recursion with loop.
498 Check right operand of - does not specify a register when parsing
499 the address of a memory reference.
500 (intel_e05, intel_e05_1): Combine, replace recursion with loop.
501 Check operands do not specify a register when parsing the address of
503 (intel_e06, intel_e06_1): Likewise.
504 (intel_e09, intel_e09_1): Combine, replace recursion with loop. Also
505 handle SHORT as well as unary + and -. Don't accept : except for
506 segment overrides or in direct far jump/call insns.
507 (intel_brack_expr): New.
508 (intel_e10, intel_e10_1): Combine, replace recursion with loop. Use
510 (intel_e11): Replace chain of if/else-if by switch, alloing fall-
511 through in certain cases. Use intel_brack_expr. Add new diagnostics.
512 Allow symbolic constants as register scale value.
513 (intel_get_token): Replace call to malloc and check of return value
514 with call to xmalloc. Change handling for FLAT to match MASM's.
515 (intel_putback_token): Don't try to back up/free current token if
518 2005-03-16 Daniel Jacobowitz <dan@codesourcery.com>
520 * configure.tgt: Set emulation for arm-*-eabi*.
521 * config/tc-arm.c (meabi_flags): Check EABI_DEFAULT.
522 * config/te-armeabi.h: New file.
523 * config/te-armlinuxeabi.h (EABI_DEFAULT): Define.
524 * config/te-symbian.h: Include "te-armeabi.h".
526 2005-03-16 Nick Clifton <nickc@redhat.com>
528 * cgen.c (gas_cgen_parse_operand): Copy opinfo parameter into a
529 local variable in case it is clobbered by the setjmp.
531 2005-03-16 Nick Clifton <nickc@redhat.com>
532 Ben Elliston <bje@au.ibm.com>
534 * configure.in (werror): New switch: Add -Werror to the
535 compiler command line. Enabled by default. Disable via
537 * configure: Regenerate.
539 2005-03-16 Nick Clifton <nickc@redhat.com>
541 * config/obj-coff.h: Convert to ISO C90 formatting.
542 * config/obj-coff.c: Convert to ISO C90 formatting.
544 2005-03-15 Zack Weinberg <zack@codesourcery.com>
546 * config/tc-arm.c (do_mla): Rename to do_mlas, take second
547 is_mls parameter; do not diagnose Rm==Rd when is_mls.
548 (do_mla, do_mls, five_bit_unsigned_immediate, bfci_lsb_and_width)
549 (do_bfc, do_bfi, do_bfx, do_rbit, do_mov16, do_ldsttv4): New functions.
550 (insns): Add ARMv6T2 instructions:
551 bfc bfi mls movw movt rbit sbfx ubfx ldrht ldrsht ldrsbt strht.
552 (arm_archs): Add V6T2 variants.
554 2005-03-15 Nick Clifton <nickc@redhat.com>
556 * NEWS: Add cutoff for changes in 2.16 release.
558 2005-03-15 Jan Beulich <jbeulich@novell.com>
560 * expr.c (operand): Merge handling of unary + into that for unary
563 2005-03-14 Eric Christopher <echristo@redhat.com>
565 * config/tc-mips.c: Include dw2gencfi.h.
566 (mips_cfi_frame_initial_instructions): New.
567 * config/tc-mips.h (TARGET_USE_CFIPOP): Define.
568 (tc_cfi_frame_initial_instructions): Ditto.
569 (DWARF2_DEFAULT_RETURN_COLUMN): Ditto.
570 (DWARF2_CIE_DATA_ALIGNMENT): Ditto.
571 * Makefile.am: Update dependencies.
572 * Makefile.in: Regenerate.
574 2005-03-15 Alan Modra <amodra@bigpond.net.au>
576 * po/es.po: Commit new Spanish translation.
578 2005-03-14 Alan Modra <amodra@bigpond.net.au>
580 * po/tr.po: Commit new Turkish translation.
582 2005-03-12 Zack Weinberg <zack@codesourcery.com>
584 * config/tc-arm.c (tinsns): Add ARMv6K instructions sev, wfe,
587 2005-03-11 Daniel Jacobowitz <dan@codesourcery.com>
589 * config-gas.com: Mark vax-vms as obsolete.
590 * configure.in: Remove fmt=vms support.
591 * config.in: Regenerate.
592 * configure: Regenerate.
593 * config/obj-vms.h, config/obj-vms.c, config/vms-conf.h: Remove.
595 2005-03-10 Sterling Augustine <sterling@tensilica.com>
596 Bob Wilson <bob.wilson@acm.org>
598 * config/tc-xtensa.c (finish_vinsn): Include the last instruction slot
599 when checking if xg_resolve_literals needs to be called.
600 * config/tc-xtensa.h: Fix spelling typo in a comment.
602 2005-03-10 Jan Beulich <jbeulich@novell.com>
604 * config/tc-tic54x.h (tic54x_macro_info): Change parameter type.
605 * config/tc-tic54x.c (tic54x_macro_info): Likewise. Replace hand-
606 crafted structure declarations with the types from macro.h.
608 2005-03-09 Richard Sandiford <rsandifo@redhat.com>
610 * config/tc-mips.c (s_cpsetup): Use '__gnu_local_gp' instead of '_gp'
611 for -mno-shared optimization.
613 2005-03-09 Richard Sandiford <rsandifo@redhat.com>
615 * config/tc-mips.c (MAX_VR4130_NOPS, MAX_DELAY_NOPS): New macros.
616 (MAX_NOPS): Bump to 4.
617 (mips_fix_vr4130): New variable.
618 (nops_for_vr4130): New function.
619 (nops_for_insn): Use MAX_DELAY_NOPS rather than MAX_NOPS. Use
620 nops_for_vr4130 if working around VR4130 errata.
621 (OPTION_FIX_VR4130, OPTION_NO_FIX_VR4130): New macros.
622 (md_longopts): Add -mfix-vr4130 and -mno-fix-vr4130.
623 (md_parse_option): Handle them.
624 (md_show_usage): Print them.
625 * doc/c-mips.texi: Document -mfix-vr4130 and -mno-fix-vr4130.
627 2005-03-09 Richard Sandiford <rsandifo@redhat.com>
629 * config/tc-mips.c (append_insn): Remove cop_interlocks test from
632 2005-03-09 Richard Sandiford <rsandifo@redhat.com>
634 * config/tc-mips.h (mips_flush_pending_output): Delete.
635 (mips_emit_delays): Declare.
636 (md_flush_pending_output): Use mips_emit_delays.
637 * config/tc-mips.c (mips_no_prev_insn): Remove parameter; always forget
638 the previous instructions.
639 (md_begin, append_insn, md_parse_option): Update callers.
640 (mips_emit_delay): Remove parameter. Move INSNS != 0 code to
642 (mips_align, s_change_sec, s_cons, s_float_cons, s_gpword)
643 (s_gpdword): Update callers.
644 (start_noreorder, end_noreorder): New functions.
645 (macro, macro2, mips16_macro, s_mipsset): Use them instead of
646 manipulating mips_opts or prev_nop_frag directly.
647 (mips_flush_pending_output): Delete.
649 2005-03-09 Richard Sandiford <rsandifo@redhat.com>
651 * config/tc-mips.c (mips_move_labels): New function, taken from...
652 (append_insn, mips_emit_delays): ...here.
654 2005-03-09 Richard Sandiford <rsandifo@redhat.com>
656 * config/tc-mips.c (MAX_NOPS): New macro.
657 (history): Resize to 1 + MAX_NOPS.
658 (fix_vr4120_class): New enumeration.
659 (vr4120_conflicts): New variable.
660 (init_vr4120_conflicts): New function.
662 (insn_uses_reg): Constify first argument.
663 (classify_vr4120_insn, insns_between, nops_for_insn, nops_for_sequence)
664 (nops_for_insn_or_target): New functions.
665 (append_insn): Use the new nops_for_* functions instead of inline
666 delay checks. Generalize prev_nop_frag handling to handle an
667 arbitrary history length. Insert nops into the history buffer
668 once the number of nops in prev_nop_frag is fixed.
669 (emit_delays): Use nops_for_insn instead of inline delay checks.
671 2005-03-09 Richard Sandiford <rsandifo@redhat.com>
673 * config/tc-mips.c (append_insn): Remove now-redundant nops != 0
674 check from branch delay code. Remove unnecessary check for branches.
676 2005-03-09 Richard Sandiford <rsandifo@redhat.com>
678 * config/tc-mips.c (dummy_opcode): Delete.
679 (nop_insn, mips16_nop_insn): New variables.
680 (NOP_INSN): New macro.
681 (insn_length, create_insn, install_insn, move_insn, add_fixed_insn)
682 (add_relaxed_insn, insert_into_history, emit_nop): New functions.
683 (md_begin): Initialize nop_insn and mips16_nop_insn.
684 (append_insn): Use the new emit_nop function to add nops, recording
685 them in the history buffer. Use add_fixed_insn or add_relaxed_insn
686 to reserve room for the instruction and install_insn to install the
687 final form. Use insert_into_history to record the instruction in
688 the history buffer. Use move_insn to do delay slot filling.
689 (mips_emit_delays): Use add_fixed_insn instead of the emit_nop macro.
690 (macro_build, mips16_macro_build, macro_build_lui, mips_ip)
691 (mips16_ip): Use create_insn to initialize mips_cl_insns.
693 2005-03-09 Richard Sandiford <rsandifo@redhat.com>
695 * config/tc-mips.c (INSERT_BITS, EXTRACT_BITS, INSERT_OPERAND)
696 (EXTRACT_OPERAND, MIPS16_INSERT_OPERAND, MIPS16_EXTRACT_OPERAND): New.
697 (insn_uses_reg, reg_needs_delay, append_insn, macro_build)
698 (mips16_macro_build, macro_build_lui, mips16_macro, mips_ip)
699 (mips16_ip): Use the new macros instead of explicit masks and shifts.
701 2005-03-09 Richard Sandiford <rsandifo@redhat.com>
703 * config/tc-mips.c (mips_cl_insn): Replace the valid_p, delay_slot_p
704 and extended_p fields with a single fixed_p field.
705 (append_insn, mips_no_prev_insn): Adjust accordingly.
707 2005-03-09 Richard Sandiford <rsandifo@redhat.com>
709 * config/tc-mips.c (mips_cl_insn): Replace reloc_type array with
710 a single mips16_absolute_jump_p bit.
711 (append_insn): Adjust accordingly.
713 2005-03-09 Richard Sandiford <rsandifo@redhat.com>
715 * config/tc-mips.h (mips_cl_insn): Move definition to...
716 * config/tc-mips.c (mips_cl_insn): ...here. Add new fields:
717 frag, where, fixp, reloc_type, valid_p, noreorder_p, delay_slot_p
719 (history): New variable.
720 (prev_insn, prev_prev_insn, prev_insn_valid, prev_insn_frag)
721 (prev_insn_where, prev_insn_reloc_type, prev_insn_fixp)
722 (prev_insn_is_delay_slot, prev_insn_unreordered, prev_insn_extended)
723 (prev_prev_insn_unreordered): Delete.
724 (reg_needs_delay, append_insn, mips_no_prev_insn, mips_emit_delays)
725 (macro_start): Replace uses of prev_insn* with the equivalent history[]
728 2005-03-08 Daniel Jacobowitz <dan@codesourcery.com>
730 * doc/Makefile.am: Update as.info dependencies.
731 * aclocal.m4, Makefile.in, doc/Makefile.in: Regenerated.
733 2005-03-08 Jan Beulich <jbeulich@novell.com>
735 * doc/as.texinfo: Add sentence to indicate redefining a macro is an
736 error, and point to .purgem documentation if someone really needs
738 * NEWS: Mention macro redefinition is now an error.
740 2005-03-08 Jan Beulich <jbeulich@novell.com>
742 * config/tc-ia64.c (emit_one_bundle): Track last slot user insn was
743 emitted to. Add more precise diagnostics for non-fitting insns based
744 on that. Eliminate now superfluous special casing of MLX. Clear out
745 slot information when dropping an insn.
747 2005-03-08 Jan Beulich <jbeulich@novell.com>
749 * config/tc-ia64.c (parse_section_name): Rename to...
750 (cross_section): In addition to separating the name from the rest of
751 the arguments, also carry out the operation.
752 (dot_xdata): Use cross_section.
753 (dot_float_cons): Likewise.
754 (dot_xstringer): Likewise.
755 (dot_xdata_ua): Likewise.
756 (dot_float_cons_ua): Likewise. Pass float_cons, not stmt_float_cons.
758 2005-03-05 Alan Modra <amodra@bigpond.net.au>
760 * po/gas.pot: Regenerate.
762 2005-03-04 David Daney <ddaney@avtrex.com>
764 * config/tc-mips.c (macro_build_lui): Use '__gnu_local_gp'
765 instead of '_gp' for -mno-shared optimization.
767 (s_abicalls): Document it in the comment.
768 (md_show_usage): Document the -mno-shared option.
770 2005-03-04 Richard Sandiford <rsandifo@redhat.com>
772 * config/tc-mips.c (mips_set_options): Add sym32 field.
773 (mips_opts): Initialize it.
774 (HAVE_32BIT_ADDRESSES): Set to true if pointers are 32 bits wide.
775 (HAVE_64BIT_ADDRESSES): Redefine as !HAVE_32BIT_ADDRESSES.
776 (HAVE_32BIT_SYMBOLS, HAVE_64BIT_SYMBOLS): New macros.
777 (load_address): Use HAVE_64BIT_SYMBOLS instead of HAVE_64BIT_ADDRESSES
778 when deciding whether to use a symbolic %highest/%higher expansion.
779 (macro): Likewise. Remove o64/n32 linux hack. Always use
780 ADDRESS_ADD*_INSN for address addition in the expansion of "dla"
781 and "la". Handle constants separately from symbolic expressions in
782 the "ld_st:" case, using 64-bit arithmetic if HAVE_64BIT_ADDRESSES
783 and using load_register to load the high part of the address.
784 (OPTION_MSYM32, OPTION_NO_MSYM32): New macros.
785 (OPTION_ELF_BASE): Bump by 2.
786 (md_longopts): Add entries for -msym32 and -mno-sym32.
787 (md_parse_option): Handle them.
788 (usage): Document them.
789 (s_mipsset): Handle ".set sym32" and ".set nosym32".
790 (s_cpload, s_cpsetup): Use HAVE_64BIT_SYMBOLS instead of
791 HAVE_64BIT_ADDRESSES to detect 64-bit values of "_gp".
792 * doc/c-mips.texi: Document ".set sym32", ".set nosym32",
793 -msym32 and -mno-sym32.
795 2005-03-03 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
797 * config/tc-mips.c (load_address): Implement GP optimization
798 for 64bit address space non-PIC. Fix formatting.
799 (macro): Likewise. Simplify code.
800 (md_parse_option): Don't bail out if -G 0 is set for PIC code.
801 (mips_after_parse_args): Simplify code.
803 2005-03-03 Nick Clifton <nickc@redhat.com>
805 * expr.c (operand): Remove redundant code enclosed by #ifdef
806 RELAX_PAREN_GROUPING....#endif.
808 * config/tc-mn10200.c (tc_gen_reloc): Handle the case where the
809 reloc is the difference of two symbols defined in the same
812 * config/tc-iq2000.c (line_comment_chars): Include the # character
813 as otherwise this breaks #APP/#NO_APP processing.
815 2005-03-03 Ramana Radhakrishnan <ramana.radhakrishnan@codito.com>
817 * config/tc-arc.c(md_assemble): Remove dead code for handling
818 immediate indexing of ld and st .
820 2005-03-02 Daniel Jacobowitz <dan@codesourcery.com>
821 Joseph Myers <joseph@codesourcery.com>
823 * config/tc-mips.c (percent_op): Add %tlsgd, %tlsldm, %dtprel_hi,
824 %dtprel_lo, %tprel_hi, %tprel_lo, and %gottprel.
825 (parse_relocation): Check for a word break after a relocation
827 (md_apply_fix3): Handle TLS relocations, and mark thread-local
830 2005-03-02 Alan Modra <amodra@bigpond.net.au>
832 * config/tc-ppc.c (ppc_fix_adjustable <ELF>): Remove bogus checks.
834 2005-03-02 Jan Beulich <jbeulich@novell.com>
836 * as.c (main): Use unlink_if_ordinary instead of unlink.
837 * messages.c (as_fatal): Likewise.
839 2005-03-02 Jan Beulich <jbeulich@novell.com>
841 * config/tc-i386.c (build_modrm_byte): Add lock prefix for cr8...15
843 (parse_register): Allow cr8...15 in all modes.
845 2005-03-02 Jan Beulich <jbeulich@novell.com>
847 * config/tc-i386.c (intel_e11): If not followed by T_PTR, treat T_BYTE
848 etc. like normal symbol references (T_ID).
850 2005-03-02 Alan Modra <amodra@bigpond.net.au>
852 * symbols.c (fb_label_name): Fix silly thinko in last change.
854 2005-03-02 Alan Modra <amodra@bigpond.net.au>
856 * expr.c (integer_constant): Remove TARGET_WORD_SIZE hack.
857 * config/tc-m68k.h (TARGET_WORD_SIZE): Delete.
859 * symbols.c (fb_label_name): Allow an augend of 2 for mmix.
861 2005-03-01 Ramana Radhakrishnan <ramana.radhakrishnan@codito.com>
864 * config/tc-arc.c (md_assemble): Initialize suffix for extension
867 2005-03-01 Alan Modra <amodra@bigpond.net.au>
869 * config/obj-coff.c (fixup_segment): Delete sy_mri_common assertion.
871 * as.h (assert): Warning fix.
872 * expr.c (expr): Correct assertion.
873 * read.c (s_comm_internal): Remove assertion.
874 * write.c (relax_segment): Enable vma assertion only for BFD_ASSEMBLER.
875 (fixup_segment): Remove assertion.
876 * config/tc-dlx.c (machine_ip): Remove untrue assertions.
877 (md_apply_fix3): Likewise.
878 * config/tc-i370.c (md_begin): Correct assertion.
879 (i370_macro): Warning fix for assertion.
881 2005-03-01 Alan Modra <amodra@bigpond.net.au>
883 * configure.in (AC_C_BIGENDIAN): Invoke.
884 * configure: Regenerate.
885 * write.c (write_object_file <!BFD_ASSEMBLER>): Don't use sizeof
886 host variable to set string header size.
887 * config/obj-aout.c (obj_header_append): Don't use host structs.
888 (obj_symbol_to_chars): Likewise.
889 (obj_emit_strings): Likewise. Use the passed in output pointer.
890 * config/obj-aout.h (H_GET_FILE_SIZE): Include H_GET_LINENO_SIZE.
891 * config/obj-bout.c (obj_emit_relocations): Use md_reloc_size,
892 not sizeof host struct.
893 (obj_header_append, obj_symbol_to_chars): Don't use host structs.
894 (obj_emit_strings): Likewise.
895 * config/obj-bout.h (EXEC_BYTES_SIZE): Define.
896 (N_TXTOFF, H_GET_FILE_SIZE, H_GET_HEADER_SIZE): Use instead of
898 (H_SET_SYMBOL_TABLE_SIZE): Hard code sym size rather than using
900 (host_number_to_chars): Define.
901 * config/obj-hp300.c (hp300_header_append): Don't use sizeof
902 host internal struct to set header sizes.
903 * config/tc-i960.c (md_number_to_field): Warning fix.
904 (md_ri_to_chars): Use host byte order.
905 (get_cdisp, md_apply_fix3): Warning fix.
906 * config/tc-m68k.c (md_assemble): Don't use sizeof host short.
908 2005-02-28 Ramana Radhakrishnan <ramana.radhakrishnan@codito.com>
910 * doc/c-arc.texi: Update documentation about ARC's extension
913 2005-02-27 Svein E. Seldal <svein@dev.seldal.com>
915 * config/tc-tic4x.c (tic4x_gen_to_words): Changed mail
918 2005-02-23 Alan Modra <amodra@bigpond.net.au>
920 * cgen.c: Warning fixes.
921 * config/tc-arc.c: Likewise.
922 * config/tc-arm.c: Likewise.
923 * config/tc-avr.c: Likewise.
924 * config/tc-d10v.c: Likewise.
925 * config/tc-d30v.c: Likewise.
926 * config/tc-frv.c: Likewise.
927 * config/tc-frv.h: Likewise.
928 * config/tc-h8300.c: Likewise.
929 * config/tc-h8500.c: Likewise.
930 * config/tc-i370.c: Likewise.
931 * config/tc-i960.c: Likewise.
932 * config/tc-ia64.c: Likewise.
933 * config/tc-ip2k.c: Likewise.
934 * config/tc-m68hc11.c: Likewise.
935 * config/tc-maxq.c: Likewise.
936 * config/tc-mcore.c: Likewise.
937 * config/tc-mips.c: Likewise.
938 * config/tc-msp430.c: Likewise.
939 * config/tc-pj.c: Likewise.
940 * config/tc-ppc.c: Likewise.
941 * config/tc-ppc.h: Likewise.
942 * config/tc-s390.c: Likewise.
943 * config/tc-sh.c: Likewise.
944 * config/tc-sh64.c: Likewise.
945 * config/tc-tic4x.c: Likewise.
946 * config/tc-tic80.c: Likewise.
947 * config/tc-v850.c: Likewise.
948 * config/tc-vax.c: Likewise.
949 * config/tc-w65.c: Likewise.
950 * config/tc-xstormy16.c: Likewise.
951 * config/tc-z8k.c: Likewise.
953 2005-02-22 Catherine Moore <clm@cm00re.com>
955 * read.c (read_a_source_file): Reinstate TC_EQUAL_IN_INSN test.
956 * doc/internals.texi (TC_EQUAL_IN_INSN): Reinstate.
958 2005-02-22 Eric Christopher <echristo@redhat.com>
960 * config/tc-mips.c (struct proc): Change isym to
961 func_sym. New member func_end_sym.
962 (s_mips_ent): Update.
963 (s_mips_end): Ditto. Add code to compute function size.
965 2005-02-22 Alan Modra <amodra@bigpond.net.au>
967 * read.c: Warning fixes.
968 * config/obj-elf.c: Likewise.
970 2005-02-22 Maciej W. Rozycki <macro@mips.com>
972 * config/tc-mips.c (append_insn): Call dwarf2_emit_insn() before
975 2005-02-21 H.J. Lu <hongjiu.lu@intel.com>
977 * config/obj-coff.c (obj_coff_section): Replace SEC_SHARED with
980 * config/tc-tic54x.c (tic54x_bss): Replace SEC_BLOCK with
982 (demand_empty_rest_of_line): Likewise.
983 (tic54x_sblock): Likewise.
984 (tic54x_clink): Replace with SEC_CLINK with SEC_TIC54X_CLINK.
986 2005-02-21 Alan Modra <amodra@bigpond.net.au>
988 * read.c (address_bytes): New function.
989 (TC_ADDRESS_BYTES): Default for BSD_ASSEMBLER to address_bytes.
990 (potable): Add "dc.a".
991 (cons_worker): Handle "dc.a".
992 * doc/internals.texi (TC_ADDRESS_BYTES): Document.
994 2005-02-21 Alan Modra <amodra@bigpond.net.au>
996 * input-file.c (input_file_open): Rearrange to avoid warning.
998 2005-02-19 Alan Modra <amodra@bigpond.net.au>
1000 * config/tc-hppa.h (TC_EQUAL_IN_INSN): Delete.
1001 * read.c (read_a_source_file): Remove TC_EQUAL_IN_INSN test.
1002 * doc/internals.texi (TC_EQUAL_IN_INSN): Delete.
1004 2005-02-18 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
1006 * config/tc-mips.c (macro_build_ldst_constoffset): Fail on $at
1007 uses after .set noat.
1008 (load_address): Likewise.
1009 (macro): Likewise. Don't try to avoid $at use by sacrificing
1010 the target register before it is stored, it won't work.
1012 2005-02-17 James E Wilson <wilson@specifixinc.com>
1014 * config/tc-ia64.c (emit_one_bundle): Stop filling a bundle if we
1015 see an instruction that specifies a template.
1017 2005-02-18 Alan Modra <amodra@bigpond.net.au>
1019 * config/tc-openrisc.c (openrisc_relax_frag): Delete unused function.
1020 * config/tc-sparc.c (sparc_ip): Make op_exp static to silence warnings.
1021 * config/tc-tic80.c (build_insn): Init insn[1] to silence warning.
1023 2005-02-17 H.J. Lu <hongjiu.lu@intel.com>
1025 * NEWS: Mention "-mhint.b=[ok|warning|error]".
1027 * config/tc-ia64.c (md): Add hint_b.
1028 (emit_one_bundle): Handle md.hint_b for "hint".
1029 (md_parse_option): Accepted "-mhint.b=[ok|warning|error]".
1030 (md_show_usage): Add "-mhint.b=[ok|warning|error]".
1031 (ia64_init): Set md.hint_b to error.
1032 (md_assemble): Handle md.hint_b for "hint.b".
1034 * doc/as.texinfo: Add "-mhint.b=[ok|warning|error]".
1035 * doc/c-ia64.texi: Likewise.
1037 2005-02-17 Alan Modra <amodra@bigpond.net.au>
1039 * tc.h (struct relax_type, relax_typeS): Move from here..
1040 * as.h: ..to here. Make rlx_forward and rlx_backward an offsetT.
1041 * ecoff.c (ecoff_new_file): Add appfile param.
1042 * ecoff.h (ecoff_new_file): Likewise.
1043 * itbl-lex.h: New file.
1044 * itbl-lex.l: Include itbl-lex.h.
1045 * itbl-parse.y: Likewise.
1046 (insntbl_line, yyparse, yylex): Move to itbl-lex.h.
1047 * read.c (s_app_file_string): Mark appfile possibly unused.
1048 * subsegs.c (seg_not_empty_p): Make sec possibly unused.
1049 * subsegs.h (struct seg_info_trash): Delete.
1050 (seg_info): Use segment_info_type instead.
1051 * config/obj-coff.c (struct filename_list): Make filename const char *.
1052 * config/obj-ecoff.h (obj_app_file): Pass app to ecoff_new_file.
1053 * config/obj-elf.c (elf_file_symbol): Similarly.
1054 * config/tc-a29k.c (md_apply_fix3): Make val a valueT. Don't use
1056 * config/tc-arc.c (md_operand): Warning fix.
1057 * config/tc-arm.c (arm_parse_reloc): Only define when OBJ_ELF.
1058 (md_begin): Rearrange #if defined OBJ_COFF || defined OBJ_ELF.
1059 * config/tc-cris.h (TC_IMPLICIT_LCOMM_ALIGNMENT): Use do while.
1060 * config/tc-frv.c (frv_force_relocation): Warning fix.
1061 * config/tc-m68k.c (md_parse_option): Delete unused var.
1062 * config/tc-mcore.c (mylog2): Rename from log2 throughout.
1063 * config/tc-sparc.c: Likewise.
1064 (s_common): Warning fix.
1065 * config/tc-mips.c (append_insn): Use unsigned long long expressions.
1066 * config/tc-mmix.c (PUSHJSTUB_MAX, PUSHJSTUB_MIN): Define from
1068 * config/tc-s390.c (s390_insn): Delete test of unsigned >= 0.
1069 * config/tc-sh.c (sh_cfi_frame_initial_instructions,
1070 sh_regname_to_dw2regnum): Only define for OBJ_ELF.
1071 * config/tc-tic4x.c (tic4x_insert_reg): Use ISLOWER.
1072 (tic4x_do_align): Use TIC_NOP_OPCODE.
1073 * config/tc-tic4x.h (TIC_NOP_OPCODE): Rename from NOP_OPCODE.
1074 * config/tc-vax.c: Include netinet/in.h.
1075 (tc_headers_hook): Formatting.
1076 * config/tc-xstormy16.c (md_pcrel_from_section): Correct parens.
1078 2005-02-17 Jan Beulich <jbeulich@novell.com>
1080 * config/tc-ia64.c (ia64_parse_name): Don't advance 'name' when
1081 parsing inN, locN, outN. Set 'idx' to offset register number starts
1082 at. Don't handle numbers with leading zeroes or beyond 95. Remove
1085 2005-02-16 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
1087 * config/tc-mips.c (load_address): Fix formatting.
1088 (macro): Don't use AT if .set noat is in effect. Fix formatting.
1089 Catch macros which are unexpandable without AT. Remove duplicate
1091 (macro2): Remove duplicate zeroing of used_at.
1093 2005-02-16 Alan Modra <amodra@bigpond.net.au>
1095 * dw2gencfi.c (output_cie, output_fde): Use DW_CFA_nop rather
1098 2005-02-15 Nigel Stephens <nigel@mips.com>
1099 Maciej W. Rozycki <macro@mips.com>
1101 * config/tc-mips.c (reloc_needs_lo_p): Handle
1102 BFD_RELOC_MIPS16_HI16_S.
1103 (fixup_has_matching_lo_p): Handle BFD_RELOC_MIPS16_LO16.
1104 (append_insn): Add BFD_RELOC_MIPS16_GPREL, BFD_RELOC_MIPS16_HI16_S
1105 and BFD_RELOC_MIPS16_LO16 to relocs to suppress overflow
1107 (mips16_ip): Resolve BFD_RELOC_MIPS16_HI16_S,
1108 BFD_RELOC_MIPS16_HI16 and BFD_RELOC_MIPS16_LO16 for constants.
1109 Call my_getSmallExpression() to parse percent operators.
1110 (percent_op_match, mips_percent_op): Separate definitions.
1111 (mips16_percent_op): Define percent operators for the MIPS16 mode.
1112 (parse_relocation): Handle the MIPS16 mode using
1114 (md_apply_fix3): Handle BFD_RELOC_MIPS16_HI16,
1115 BFD_RELOC_MIPS16_HI16_S and BFD_RELOC_MIPS16_LO16.
1117 2005-02-15 Jan Beulich <jbeulich@novell.com>
1119 * config/tc-ia64.c (md_apply_fix3): Call ia64_gen_real_reloc_type
1120 instead of explicitly dealing with the translation; exclude
1121 relocations that are already pcrel, however.
1123 2005-02-15 Jan Beulich <jbeulich@novell.com>
1125 * config/tc-ia64.c: Include limits.h (if available).
1126 (gr_values[0]): Set path to INT_MAX.
1127 (dot_reg_val): Don't allow changing value of r0. Limit range of
1128 general registers at r127.
1129 (specify_resource): Default resource index is -1. Don't set resource
1130 index (in case IA64_RS_RSE) without setting the specific flag.
1131 (note_register_values): Check operand is O_constant before tracking
1132 input value of moves. Add tracking for dep.z with constant inputs.
1133 (print_dependency): Resource index of specific resource may be zero.
1134 (check_dependencies): Likewise.
1136 2005-02-15 Jan Beulich <jbeulich@novell.com>
1138 * config/tc-ia64.c (parse_operands): New local variables reg1, reg2,
1139 reg_class. Check operands and emit diagnostics for illegal use of
1142 2005-02-15 Jan Beulich <jbeulich@novell.com>
1144 * config/tc-ia64.c (ia64_gen_real_reloc_type): Define and initialize
1145 new variables type, suffix, and width. Handle
1146 BFD_RELOC_IA64_DIR(32|64)[LM]SB in FUNC_LT_FPTR_RELATIVE case.
1147 Handle BFD_RELOC_IA64_DIR64[LM]SB in FUNC_TP_RELATIVE case. Add
1148 FUNC_DTP_MODULE case. Handle BFD_RELOC_IA64_DIR32[LM]SB in
1149 FUNC_DTP_RELATIVE case. Return incoming relocation type if
1150 BFD_RELOC_IA64_IPLT[LM]SB in FUNC_IPLT_RELOC case. Generate warning
1151 if unable to translate relocation type, using the new variables.
1153 2005-02-15 Jan Beulich <jbeulich@novell.com>
1155 * config/tc-ia64.h (ia64_symbol_chars): Declare.
1156 (ty_symbol_chars): Define.
1157 * config/tc-ia64.c (ia64_symbol_chars): Define.
1159 2005-02-15 Jan Beulich <jbeulich@novell.com>
1161 * config/tc-ia64.c (ia64_parse_name): Only update next character if
1162 input_line_pointer was advanced.
1164 2005-02-14 Kaz Kojima <kkojima@rr.iij4u.or.jp>
1166 * config/tc-sh.c (md_apply_fix3): Add parentheses around &
1169 2005-02-13 Jan Beulich <jbeulich@novell.com>
1171 * config/tc-ia64.c (md_parse_option): Handle -xnone and -xdebugn.
1172 (md_show_usage): Add -xnone, -xdebugn, and -xdebugx. Relocate default
1174 (ia64_init): Set md.detect_dv.
1175 (ia64_start_line): New static variable warned. Warn only once when
1176 encountering explicit stops in automatic mode.
1177 * doc/c-ia64.texi: Describe -xnone, -xdebugn, and -xdebugx.
1178 * NEWS: Mention new default mode.
1180 2005-02-13 Jan Beulich <jbeulich@novell.com>
1182 * config/tc-ia64.c (dot_rot): Add comment that name strings should
1183 be freed when wiping out previous state. Canonicalize names before
1184 use. Free name string when detecting redefinition.
1185 (dot_pred_rel): Call generic expression parser to process arguments.
1186 Handle O_register case for individual predicates and O_subtract for
1188 (ia64_parse_name): Canonicalize name before looking it up in dynamic
1190 (ia64_canonicalize_symbol_name): Strip off all trailing # characters.
1191 Warn if multiple found, issue error if resulting symbol name has zero
1193 (dot_alias): Canonicalize name before use.
1195 2005-02-11 H.J. Lu <hongjiu.lu@intel.com>
1197 * config/tc-ia64.c (unwind_diagnostic): Return -1 for warning
1199 (in_procedure): Return -1 for warning.
1200 (in_prologue): Likewise.
1201 (in_body): Likewise.
1203 2005-02-11 H.J. Lu <hongjiu.lu@intel.com>
1205 * config/tc-ia64.c (dot_xdata): Undo the last change.
1206 (dot_float_cons): Likewise.
1207 (dot_xstringer): Likewise.
1208 (dot_xdata_ua): Likewise.
1209 (dot_float_cons_ua): Likewise.
1211 2005-02-11 H.J. Lu <hongjiu.lu@intel.com>
1213 * NEWS: Mention "-munwind-check=[warning|error]".
1215 * config/tc-ia64.c (md): Add unwind_check.
1216 (unwind_diagnostic): New.
1217 (in_procedure): Call unwind_diagnostic when a directive isn't
1219 (in_prologue): Call unwind_diagnostic when a directive isn't in
1221 (in_body): Call unwind_diagnostic when a directive isn't in
1223 (dot_endp): Set md.unwind_check to error before calling
1224 in_procedure and restore it after. When the name is missing or
1225 couldn't be found, use the one from the last .proc if
1226 md.unwind_check isn't error. Warn if md.unwind_check is
1228 (md_parse_option): Handle "-munwind-check=[warning|error]".
1229 (md_show_usage): Add "-munwind-check=[warning|error]".
1230 (ia64_init): Set md.unwind_check to warning.
1232 * doc/as.texinfo: Add "-munwind-check=[none|warning|error]".
1233 * doc/c-ia64.texi: Likewise.
1235 2005-02-11 Jan Beulich <jbeulich@novell.com>
1237 * config/tc-ia64.h (LEX_AT): Include LEX_BEGIN_NAME.
1239 (ia64_parse_name): New third parameter.
1240 (md_parse_name): Pass third argument.
1241 * config/tc-ia64.c (pseudo_func): Placeholders use NULL as name.
1242 (md_operand): Handling of '@'-prefixed symbols moved from here...
1243 (ia64_parse_name): ...to here.
1245 2005-02-11 Jan Beulich <jbeulich@novell.com>
1247 * config/tc-ia64.c (md): Remove last_groups and group_idx.
1248 (errata_nop_necessary_p): Remove declaraction and definition.
1249 (emit_one_bundle): Don't call errata_nop_necessary_p. Don't
1250 update md.group_idx. Don't reset md.last_groups.
1252 2005-02-11 Jan Beulich <jbeulich@novell.com>
1254 * config/tc-ia64.c (parse_section_name): Handle non-quoted first
1256 (dot_xdata): Free section name after use.
1257 (dot_float_cons): Likewise.
1258 (dot_xstringer): Likewise.
1259 (dot_xdata_ua): Likewise.
1260 (dot_float_cons_ua): Likewise.
1261 (md_pseudo_table): Add xdata16 and xdata16.ua.
1263 2005-02-10 H.J. Lu <hongjiu.lu@intel.com>
1265 * doc/all.texi: Add IA64.
1266 * doc/as.texinfo: Likewise.
1268 * doc/c-ia64.texi: Fix typos.
1270 2005-02-10 Julian Brown <julian@codesourcery.com>
1272 * config/tc-arm.c (do_t_ldmstm): Change BFD_RELOC_NONE to
1274 (do_t_push_pop): Likewise.
1275 (md_assemble): Likewise.
1276 (md_apply_fix3): Handle BFD_RELOC_NONE correctly, make
1277 BFD_RELOC_UNUSED same as previous meaning of BFD_RELOC_NONE.
1278 (create_unwind_entry): Output dependency on the required personality
1280 testsuite/gas/arm/unwind.d: Alter expected output to include
1281 dependency on __aeabi_unwind_cpp_pr[01].
1283 2005-02-07 Nathan Sidwell <nathan@codesourcery.com>
1285 * as.h (seg_not_empty_p): Return int, not bfd_boolean.
1286 * subsegs.c (seg_not_empty_p): Likewise.
1288 2005-02-07 Inderpreet Singh <inderpreetb@noida.hcltech.com>
1290 * config/tc-maxq.c (md_estimate_size_before_relax): Correct the
1291 relative jump calculation.
1292 <md_convert_frag) : Likewise.
1293 <output_disp): Likewise.
1295 2005-02-07 Hans-Peter Nilsson <hp@axis.com>
1297 * write.c (write_object_file): Recognize warning-symbol construct
1298 and skip object- and target- handling for the second symbol.
1300 2005-02-02 Jan Beulich <jbeulich@novell.com>
1302 * config/tc-ia64.c (dot_pred_rel): Update comment. Handle @-prefixed
1303 designators along with quoted ones. Free copy of quoted designator
1306 2005-02-01 Ben Elliston <bje@au.ibm.com>
1308 * config/atof-ieee.c, config/obj-coff.c, config/obj-elf.c,
1309 config/obj-ieee.c, config/obj-som.c, config/obj-vms.c,
1310 config/tc-a29k.c, config/tc-alpha.c, config/tc-arc.c,
1311 config/tc-arm.c, config/tc-d30v.c, config/tc-dlx.c,
1312 config/tc-fr30.c, config/tc-h8300.c, config/tc-h8500.c,
1313 config/tc-i370.c, config/tc-i386.c, config/tc-i960.c,
1314 config/tc-ia64.c, config/tc-m32r.c, config/tc-m32r.h,
1315 config/tc-m68hc11.c, config/tc-m68hc11.h, config/tc-mips.c,
1316 config/tc-mn10200.c, config/tc-msp430.c, config/tc-ns32k.c,
1317 config/tc-openrisc.c, config/tc-or32.c, config/tc-pdp11.c,
1318 config/tc-pj.c, config/tc-sparc.h, config/tc-tic54x.c,
1319 config/tc-tic80.c, config/tc-v850.c, config/tc-w65.c,
1320 config/tc-xtensa.c, config/tc-z8k.c, config/xtensa-relax.c: Remove
1321 #if 0'd code throughout.
1323 2005-01-31 Nick Clifton <nickc@redhat.com>
1325 * as.c (parse_args): Bump copyright date reported by --version to
1328 2005-01-31 Nick Clifton <nickc@redhat.com>
1330 * configure.tgt: Remove obsolete targets m68k-lynxos, sparc-lynxos
1333 2005-01-31 Jan Beulich <jbeulich@novell.com>
1335 * macro.c (buffer_and_nest): Allow 'from' being NULL; handle anything
1336 that can end with .endr in that case. Make requiring/permitting
1337 pseudo-ops without leading dot closer to the logic in read.c serving
1339 (expand_irp): Don't pass a mnemonic to buffer_and_nest as it will be
1342 2005-01-31 Jan Beulich <jbeulich@novell.com>
1344 * macro.c (do_formals): Adjust to no longer accept empty parameter
1346 (define_macro): Adjust to no longer accept empty macro name, garbage
1347 following the parameters, or macros that were previously defined.
1348 * read.c (s_bad_end): Declare.
1349 (potable): Add endm. Handler for endr and endm is s_bad_end.
1350 (s_bad_end): Rename from s_bad_endr. Adjust to handle both .endm
1352 * read.h (s_bad_endr): Remove.
1354 2005-01-31 Jan Beulich <jbeulich@novell.com>
1356 * config/tc-ia64.c (parse_operands): Parse all specified operands,
1357 immediately discarding (but counting) those exceeding the maximum
1358 possible amount. Track whether output and input operand counts ever
1359 matched, and use this to better indicate which of the operands/
1360 operand types was wrong; specifically don't default to pointing to
1363 2005-01-31 Jan Beulich <jbeulich@novell.com>
1365 * config/tc-ia64.c (unwind): Remove proc_end (now an automatic
1366 variable in dot_endp). Add body and insn. Make prologue,
1367 prologue_mask, body, and insn bitfields.
1368 (fixup_unw_records): Remove spurious new-lines from end of diagnostic
1370 (in_procedure, in_prologue, in_body): New.
1371 (dot_fframe, dot_vframe, dot_vframesp, dot_vframepsp, dot_save,
1372 dot_restore, dot_restorereg, dot_restorereg_p, dot_handlerdata,
1373 dot_unwentry, dot_altrp, dot_savemem, dot_saveg, dot_savef, dot_saveb,
1374 dot_savegf, dot_spill, dot_spillreg, dot_spillmem, dot_spillreg_p,
1375 dot_spillmem_p, dot_label_state, dot_copy_state, dot_unwabi,
1376 dot_personality): Use the appropriate one of the above.
1377 (dot_proc): Clear unwind.proc_start; set to current location only if
1378 none of the entry points were valid. Check for non-zero-length entry
1379 point names. Check that entry points aren't defined, yet. Clear
1380 unwind.prologue, unwind.body, and unwind.insn.
1381 (dot_body): Call in_procedure. Check that first directive in procedure
1382 had no insns emitted before. Set unwind.body.
1383 (dot_prologue): Call in_procedure. Check that not already in prologue.
1384 Check that first directive in procedure had no insns emitted before.
1386 (dot_endp): Call in_procedure. Declare proc_end. Check for non-zero-
1387 length entry point names. Check that entry points became defined.
1388 (md_assemble): Set unwind.insn once unwind.proc_start is defined.
1390 2005-01-31 Jan Beulich <jbeulich@novell.com>
1392 * config/tc-ia64.c (emit_one_bundle): Snapshot manual bundling state
1393 before actually using it. Don't generate an error in manual bundling
1394 mode when looking at an insn requiring slot 2 but not yet at slot 2.
1395 Don't generate an error in manual bundling mode when looking at an
1396 insn required to be last in its group but the required slot hasn't
1397 been reached, yet. Allow conversion from MII to MI;I for bundle
1398 consisting of only 2 insns with the stop between them. Suppress
1399 various meaningless errors resulting from detecting earlier ones.
1401 2005-01-31 Jan Beulich <jbeulich@novell.com>
1403 * config/tc-ia64.c (parse_operands): Also handle alloc without first
1406 2005-01-28 Christian Groessler <chris@groessler.org>
1408 * config/tc-z8k.c (md_assemble): Improve error detection.
1410 2005-01-28 Jan Beulich <jbeulich@novell.com>
1412 * config/tc-ia64.c (ia64_estimate_size_before_relax): Allocate space
1413 for personality routine pointer only if there is one.
1414 (ia64_convert_frag): Likewise.
1415 (generate_unwind_image): Likewise.
1417 2005-01-27 Christian Groessler <chris@groessler.org>
1419 * config/tc-z8k.c (INSERT): Remove, not used anywhere.
1420 (md_apply_fix3): Make relative branches out of range an error
1421 instead of a warning. Display correct line number for out of
1422 range branches/calls/memory accesses.
1424 2005-01-27 Nathan Sidwell <nathan@codesourcery.com>
1426 * dwarf2dbg.c (dwarf2_finish): Correct logic for determining when
1427 to emit .debug_line and other debug sections.
1428 * as.h (seg_not_empty_p): Declare.
1429 * subsegs.c (seg_not_empty_p): New predicate.
1431 2005-01-27 Andrew Cagney <cagney@gnu.org>
1433 * configure: Regenerate to track ../gettext.m4 change.
1435 2005-01-27 Jan Beulich <jbeulich@novell.com>
1437 * config/tc-ia64.c (emit_one_bundle): Change "?imbf??" to "?ibmfxx".
1439 2005-01-27 Jan Beulich <jbeulich@novell.com>
1441 * config/tc-ia64.c (emit_one_bundle): Add late resolution of move
1442 to/from application registers dynamic insns.
1443 (md_assemble): Defer resolution of move to/from application registers
1444 dynamic insns when they can be issued on either the I- or M-units.
1446 2005-01-25 Alexandre Oliva <aoliva@redhat.com>
1448 * config/tc-frv.c (md_apply_fix3): Mark TLS symbols as such.
1449 2004-12-10 Alexandre Oliva <aoliva@redhat.com>
1450 * config/tc-frv.c (frv_pic_ptr): Add tlsmoff support.
1451 2004-11-10 Alexandre Oliva <aoliva@redhat.com>
1452 * cgen.c (gas_cgen_parse_operand): Handle
1453 CGEN_PARSE_OPERAND_SYMBOLIC.
1454 * config/tc-frv.c (md_cgen_lookup_reloc): Handle TLS relocations.
1455 (frv_force_relocation): Likewise. Fix handling of PIC
1457 (md_apply_fix3): Likewise.
1459 2005-01-21 Ben Elliston <bje@au.ibm.com>
1461 * as.h: Remove #if 0'd code.
1462 * atof-generic.c (atof_generic): Likewise.
1463 * ecoff.c (ecoff_directive_frame): Likewise.
1464 * frags.h (FRAG_APPEND_1_CHAR): Likewise.
1465 * itbl-ops.c (itbl_add_reg): Likewise.
1466 * listing.c (calc_hex): Likewise.
1467 * read.c (MASK_CHAR): Likewise.
1468 * subsegs.c (subsegs_print_statistics): Likewise.
1469 * symbols.c (indent): Likewise.
1470 * write.c (write_relocs): Likewise.
1471 (write_object_file): Likewise.
1472 (relax_frag): Likewise.
1474 2005-01-20 Nick Clifton <nickc@redhat.com>
1476 * as.c (std_longopts): Add an entry for "--a" in order to prevent
1477 getopt_long_only() from considering -a as an abbreviation for
1479 (parse_args): Fix the parsing of -a=<file>.
1481 2005-01-20 Alan Modra <amodra@bigpond.net.au>
1484 * read.c (s_incbin): Adjust default count for skip. Check validity
1485 of count and skip rigorously.
1487 2005-01-19 Fred Fish <fnf@specifixinc.com>
1489 * config/tc-mips.c (dummy_opcode): Add init for new struct member.
1491 2005-01-19 Richard Sandiford <rsandifo@redhat.com>
1493 * read.c (convert_to_bignum): New function, split out from...
1494 (emit_expr): ...here. Handle the case where X_add_number is
1495 positive and the input value is negative.
1496 (output_big_sleb128): Fix setting of continuation bit. Check whether
1497 the final byte needs to be sign-extended. Fix size-shrinking loop.
1498 (emit_leb128_expr): When generating a signed leb128, see whether the
1499 sign of an O_constant's X_add_number matches the sign of the input
1500 value. Use a bignum if not.
1502 2005-01-17 Andrew Stubbs <andrew.stubbs@st.com>
1504 * tc-sh.c (md_begin,md_parse_option): Change arch_sh1_up to
1505 arch_sh_up in order to match the external name and make the
1506 testsuite's job easier.
1508 2005-01-14 H.J. Lu <hongjiu.lu@intel.com>
1511 * config/tc-i386.c (i386_scale): Disallow 0 scale.
1513 2005-01-12 Nick Clifton <nickc@redhat.com>
1515 * config/tc-iq2000.c (s_iq2000_set): Fix thinko parsing
1516 ignored_arguments array.
1518 2005-01-10 H.J. Lu <hongjiu.lu@intel.com>
1520 * write.c (write_object_file): Disallow a symbol equated to
1523 2005-01-10 Inderpreet Singh <inderpreetb@noida.hcltech.com>
1525 * tc-maxq.c: Replace constants 10 and 20 with bfd_mach_maxq10 and
1527 (md_pseudo_table): Add new pseudo ops for maxq10 and maxq20.
1528 (maxq_target): New function: Set the machine type.
1530 2005-01-06 Paul Brook <paul@codesourcery.com>
1532 * config/tc-arm.c (FPU_DEFAULT): Define for TE_VXWORKS.
1533 (md_begin): Handle TE_VXWORKS for FP defaults.
1534 (md_apply_fix3): Correct rela offsets.
1535 (elf32_arm_target_format): Add VxWorks targets.
1537 2005-01-06 Paul Brook <paul@codesourcery.com>
1539 * configure.tgt: Set em=vxworks for *-*-vxworks.
1540 * config/te-vxworks.h: New File.
1542 2005-01-06 Paul Brook <paul@codesourcery.com>
1544 * config/tc-arm.c (arm_cpus): Correct arch field for arm1026ej-s.
1546 2005-01-04 Dmitry Diky <diwil@spec.ru>
1548 * config/tc-msp430.c (md_apply_fix3): Fix offset calculation for
1551 2005-01-03 David Mosberger <davidm@hpl.hp.com>
1553 * config/tc-ia64.c (md): Add member "loc_directive_seen".
1554 (dot_loc): New function.
1555 (md_pseudo_table): Add entry to map .loc to dot_loc().
1556 (emit_one_bundle): Only call dwarf2_gen_line_info() if we have
1557 seen a .loc directive or we're generating DWARF2 debug info for
1560 2004-12-29 Alan Modra <amodra@bigpond.net.au>
1563 * read.c (s_comm_internal): Don't zero end of name until size
1564 expression has been parsed.
1566 2004-12-25 Marek Michalkiewicz <marekm@amelek.gda.pl>
1568 * config/tc-avr.c (mcu_types): Move attiny{13,2313} from avr4 to avr2.
1570 2004-12-23 Tomer Levi <Tomer.Levi@nsc.com>
1572 * config/tc-crx.c: Support 'bcop' relaxation (dealt as in 'cmp&branch'
1575 2004-12-22 Ian Lance Taylor <ian@airs.com>
1577 * configure.tgt: New.
1578 * configure.in: Move setting of cpu_type, fmt, etc., to
1580 * Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add
1581 $(srcdir)/configure.tgt.
1582 * configure, Makefile.in: Rebuild.
1584 2004-12-22 Klaus Rudolph <lts-rudolph@gmx.de>
1586 * config/tc-avr.c: Add support for the new R_AVR_LDI, R_AVR_6 and
1587 R_AVR_6_ADIW relocs for the LDI, ADIW/SBIW and LDD/STD
1589 (avr_offset_expression): New function to parse offsets for LDI
1591 (avr_operand): Use it.
1592 (md_apply_fix3): Generate the relocs.
1594 2004-12-16 Andrew Stubbs <andrew.stubbs@st.com>
1596 * config/tc-sh64.c (shmedia_md_apply_fix3): Add missing
1597 BFD_RELOC_SH_IMMS10BY8 relocation.
1599 * config/tc-sh64.c (shmedia_build_Mytes): Emit an error message rather
1600 than just ignoring bad code.
1602 2004-12-16 Richard Sandiford <rsandifo@redhat.com>
1604 * config/tc-v850.c (handle_lo16): New function.
1605 (v850_reloc_prefix): Use it to check lo().
1606 (md_assemble, md_apply_fix3): Handle BFD_RELOC_V850_LO16_SPLIT_OFFSET.
1608 2004-12-14 P.J. Darcy <darcypj@us.ibm.com>
1610 * configure.in: Add s390x-ibm-tpf support.
1611 * configure: Regenerate.
1613 2004-12-15 Jan Beulich <jbeulich@novell.com>
1615 * config/obj-elf.c (obj_elf_change_section): Only set type and
1616 attributes on new sections. Emit warning when type of re-declared
1617 section doesn't match.
1619 2004-12-15 Jan Beulich <jbeulich@novell.com>
1621 * dw2gencfi.c (dot.cfi.startproc): Clear cur_cfa_offset so
1622 '.cfi_startproc simple' doesn't inherit the old value.
1624 2004-12-15 Jan Beulich <jbeulich@novell.com>
1626 * dw2gencfi.c (output_cfi_insn): Adjust DW_CFA_def_cfa_sf generation
1627 to emit a signed and factored offset. Adjust DW_CFA_def_cfa_offset_sf
1628 generation to emit a factored offset.
1630 2004-12-10 Ian Lance Taylor <ian@wasabisystems.com>
1632 * config/tc-mips.c (macro) [M_LA_AB]: Give an error for a offset
1633 which is too large in the case of NO_PIC without 64-bit
1636 * config/tc-mips.c (mips_in_shared): New static variable.
1637 (macro_build_lui): Permit "_gp" if !mips_in_shared.
1638 (md_longopts): Add -mshared and -mno-shared.
1639 (md_parse_option): Handle OPTION_MSHARED and OPTION_MNO_SHARED.
1640 (s_cpload): Implement !mips_in_shared case.
1641 (s_cpsetup): Likewise.
1642 * doc/c-mips.texi (MIPS Opts): Document -mno-shared.
1643 * NEWS: Mention -mno-shared.
1645 2004-12-09 Paul Brook <paul@codesourcery.com>
1647 * config/tc-arm.c (s_arm_unwind_fnend): Use R_ARM_PREL31 relocation
1650 2004-12-09 Ian Lance Taylor <ian@wasabisystems.com>
1652 * config/tc-mips.c (append_insn): If we emit a nop during a relax
1653 sequence, increase the size of the sequence.
1655 * config/tc-mips.c (mips_cpu_info_table): Change "9000" entry to
1658 2004-12-07 Ben Elliston <bje@gnu.org>
1660 * read.c (s_align): Use an align_limit temporary to allay a GCC
1661 signed/unsigned comparison warning.
1663 2004-12-01 Mark Mitchell <mark@codesourcery.com>
1665 * Makefile.am (TARG_ENV_HFILES): Add te-armlinuxeabi.h.
1666 * configure.in: Use it for arm*-*-linux-gnueabi*.
1667 * config/tc-arm.c: Allow emulation file to set FPU_DEFAULT.
1668 * config/te-armlinuxeabi.h: New file.
1669 * Makefile.in: Regenerated.
1670 * aclocal.m4: Likewise.
1671 * configure: Likewise.
1672 * doc/Makefile.in: Regenerated.
1674 2004-12-02 Bob Wilson <bob.wilson@acm.org>
1676 * config/tc-xtensa.c (xtensa_switch_section_emit_state): Use subseg_set.
1677 (xtensa_restore_emit_state): Likewise.
1679 2004-12-02 Alan Modra <amodra@bigpond.net.au>
1681 * read.c (ALIGN_LIMIT): Define, increasing limit for BFD_ASSEMBLER.
1684 2004-11-30 Tero Niemela <tero_niemela@yahoo.com>
1686 * Makefile.am: Change LOCALEDIR to $(datadir)/share.
1687 * Makefile.in: Regenerate.
1689 2004-11-29 Tomer Levi <Tomer.Levi@nsc.com>
1691 * config/tc-crx.c: Major code cleanup. Remove unused variables and
1692 functions, give functions a meaningful name, add comments.
1693 (check_range): New function - Replace operand size calculation
1694 with range checking.
1695 (assemble_insn): Update Algorithm, improve error issuing.
1697 (process_label_constant): Bug fix regarding COP_BRANCH_INS relocation
1700 2004-11-29 Kazuhiro Inaoka <inaoka.kazuhiro@renesas.com>
1702 * config/tc-m32r.c (md_pcrel_from_section): Fixed a pcrel relocte
1703 miss between different section in the same module.
1704 (tc_gen_reloc): Likewise.
1706 2004-11-25 Theodore A. Roth <troth@openavr.org>
1708 * gas/config/tc-avr.c (mcu_types): Add support for atmega165,
1709 atmega325, atmega3250, atmega645 and atmega6450.
1711 2004-11-25 Jan Beulich <jbeulich@novell.com>
1713 * config/tc-i386.c (optimize_imm): Adjust immediates to only those
1714 permissible for the selected instruction suffix.
1715 (process_suffix): For DefaultSize instructions, suppressing the
1716 guessing of a 'q' suffix if the instruction doesn't support it is
1717 pointless, because only an 'l' suffix can be guessed in this place.
1719 2004-11-24 Nick Clifton <nickc@redhat.com>
1721 * config/tc-iq2000.c: Remove support for IQ10 processor.
1722 Convert to ISO C90 formatting.
1723 * config/tc-iq2000.h: Likewise.
1725 2004-11-23 Nick Clifton <nickc@redhat.com>
1727 * config/tc-mn10300.c (md_relax_table): More fixes to the offsets
1728 in this table. They should be correct now.
1730 2004-11-23 Jan Beulich <jbeulich@novell.com>
1732 * config/tc-i386.h (CpuMMX2): Declare. Artificial classifier to
1733 indicate the MMX extensions added by both SSE and 3DNow!A.
1734 (Cpu3dnowA): Declare.
1735 (CpuUnknownFlags): Update.
1736 * config/tc-i386.c (cpu_sub_arch_name): Declare.
1737 (cpu_arch): i586 and pentium do not imply MMX. i686 and pentiumpro do
1738 neither imply SSE nor MMX. k6 implies MMX. k6_2 additionally implies
1739 3DNow!. Athlon additionally implies 3DNow!A. Several new
1740 entries (those starting with a dot are for sub-arch specification).
1741 (set_cpu_arch): Handle sub-arch specifications.
1742 (parse_insn): Distinguish between instructions not supported because
1743 of insufficient CPU features and because of 64-bit mode.
1744 * doc/c-i386.texi: Describe enhanced .arch directive.
1746 2004-11-22 Bob Wilson <bob.wilson@acm.org>
1748 * config/tc-xtensa.c (xg_add_opcode_fix): Set fx_no_overflow.
1750 2004-11-22 Bob Wilson <bob.wilson@acm.org>
1752 * dwarf2dbg.c (dwarf2_finish): Don't write a .debug_line section
1753 without a corresponding .debug_info section.
1755 2004-11-22 Hans-Peter Nilsson <hp@axis.com>
1757 * read.c (potable): Add "error" and "warning".
1758 (s_errwarn): New function.
1759 * read.h (s_errwarn): Declare.
1760 * doc/as.texinfo (Error, Warning): Document .error and .warning.
1762 2004-11-22 Nick Clifton <nickc@redhat.com>
1764 * config/tc-tic54x.c (tic54x_adjust_symtab): Adjust call to
1767 2004-11-19 Alan Modra <amodra@bigpond.net.au>
1769 * config/tc-msp430.c (struct rcodes_s, MSP430_RLC, msp430_rcodes,
1770 struct hcodes_s, msp430_hcodes): From include/opcode/msp430.h.
1772 2004-11-19 Alan Modra <amodra@bigpond.net.au>
1774 * config/obj-coff.c (c_dot_file_symbol): Add "app" param.
1775 (coff_adjust_symtab): Adjust call.
1776 (crawl_symbols): Likewise.
1777 * config/obj-coff.h (c_dot_file_symbol): Add "app" param.
1778 (obj_app_file): Adjust.
1780 2004-11-18 Inderpreet Singh <inderpreetb@nioda.hcltech.com>
1782 * configure.in: Enable bfd_assember for the MAXQ port.
1783 * configure: Regenerate.
1785 2004-11-12 Bob Wilson <bob.wilson@acm.org>
1786 Sterling Augustine <sterling@tensilica.com>
1788 * config/tc-xtensa.c (finish_vinsn): Clear pending instruction if
1789 there is a conflict.
1790 (check_t1_t2_reads_and_writes): Check for both reads and writes to
1791 interfaces that are related as determined by xtensa_interface_class_id.
1793 2004-11-12 Nick Clifton <nickc@redhat.com>
1795 * config/tc-mn10300.c (md_relax_table): Fix off by one negative
1796 offsets for conditional branches.
1798 2004-11-11 Bob Wilson <bob.wilson@acm.org>
1800 * config/tc-xtensa.c (MAX_IMMED6): Change value to 65.
1802 2004-11-10 Bob Wilson <bob.wilson@acm.org>
1804 * config/tc-xtensa.c (update_next_frag_state): Always add a NOP if
1805 relaxing at the end of a loop. Don't mark frags as UNREACHABLE or
1807 (relax_frag_immed): Update call to update_next_frag_state.
1809 2004-11-10 Alan Modra <amodra@bigpond.net.au>
1811 * obj.h (struct format_ops <app_file>): Add int param.
1812 * read.h (s_app_file_string): Likewise.
1813 * read.c (s_app_file_string): Likewise.
1814 (s_app_file): Adjust s_app_file_string call.
1815 * config/tc-mips.c (s_mips_file): Likewise.
1816 * config/obj-coff.h (obj_app_file): Add app param.
1817 * config/obj-ecoff.h (obj_app_file): Likewise.
1818 * config/obj-multi.h (obj_app_file): Likewise.
1819 * config/obj-elf.h (elf_file_symbol): Likewise.
1820 * config/obj-elf.c (elf_file_symbol): Only emit one file symbol
1821 if called for # preprocessor lines.
1823 2004-11-08 H.J. Lu <hongjiu.lu@intel.com>
1826 * symbols.c (resolve_symbol_value): Convert weak symbols only
1828 (symbol_equated_reloc_p): Don't equate weaks when relocating
1829 only for Windows PECOFF.
1831 2004-11-08 Tomer Levi <Tomer.Levi@nsc.com>
1833 * config/tc-crx.c (print_insn): Check and set insn_addr.
1834 * config/tc-crx.h (md_frag_check): Define.
1836 2004-11-08 Inderpreet Singh <inderpreetb@nioda.hcltech.com>
1837 Vineet Sharma <vineets@noida.hcltech.com>
1839 * configure.in: Add support for new target maxq-coff.
1840 * configure: Regenerate.
1841 * NEWS: Mention new support.
1842 * config/tc-maxq.c: New file.
1843 * config/tc-maxq.h: New file.
1844 * config/obj-coff.h: Add support for maxq-coff.
1846 2004-11-08 Aaron W. LaFramboise <aaron98wiridge9@aaronwl.com>
1848 * symbols.c (any_external_name): Define.
1849 (resolve_symbol_value): Convert weak symbols.
1850 (S_SET_EXTERNAL): Support any_external_name.
1851 (S_SET_NAME): Qualify parameter const.
1852 (symbol_equated_reloc_p): Equate to weaks when relocating.
1853 * symbols.h (S_SET_NAME): Qualfiy parameter const.
1854 * tc.h (any_external_name): Declare.
1855 * config/obj-coff.c ("coff/pe.h"): Include for BFD
1857 (weak_is_altname): Declare and define.
1858 (weak_name2altname): Same.
1859 (weak_altname2name): Same.
1860 (weak_uniquify): Same.
1861 (weak_altprefix): Define.
1862 (obj_coff_weak): Change .weak syntax and handling.
1863 (coff_frob_symbol): Fix PE weak symbol alternates.
1864 * config/obj-coff.h (USE_UNIQUE): Define.
1865 * config/tc-i386.c (md_apply_fix3): Assume weak symbols
1866 are in another segment.
1867 (tc_gen_reloc): Remove broken addend hack.
1868 doc/as.texinfo: Update.
1870 2004-11-05 Sterling Augustine <sterling@tensilica.com>
1872 * config/tc-xtensa.c (total_frag_text_expansion): New.
1873 (md_estimate_size_before_relax): Use it.
1874 (find_address_of_next_align_frag): Likewise.
1876 2004-11-05 Tomer Levi <Tomer.Levi@nsc.com>
1878 * config/tc-crx.c: Rename argument types.
1879 (processing_arg_number): Rename to 'cur_arg_num'.
1880 (get_number_of_bits): Rename to 'set_operand_size'.
1881 (get_operandtype): Rename to 'parse_operand', totally rewrite.
1882 (set_cons_rparams): Rename to 'set_operand', totally rewrite.
1883 (set_indexmode_parameters): Remove function, integrate its code into
1885 (set_operand_size): Get rid of 'Operand Number' function parameter -
1886 use global variable 'cur_arg_num' instead.
1887 Use a local 'argument' pointer to reference the current argument.
1888 (parse_operand): Likewise.
1889 (set_operand): Likewise.
1890 (process_label_constant): Likewise.
1892 2004-11-04 Bob Wilson <bob.wilson@acm.org>
1894 * config/tc-xtensa.c: Remove XTENSA_SECTION_RENAME ifdefs.
1895 (add_section_rename): Delete. Inlined into...
1896 (build_section_rename): ...here. Use xstrdup instead of strdup.
1897 (xtensa_section_rename): Drop "const" from argument and return types.
1898 (md_show_usage): Indent to match show_usage().
1899 * config/tc-xtensa.h: Remove XTENSA_SECTION_RENAME ifdefs.
1900 (tc_canonicalize_section_name): Define.
1901 (md_elf_section_rename): Remove unused macro.
1902 * doc/as.texinfo (Overview): Document Xtensa --rename-section option.
1903 * doc/c-xtensa.texi (Xtensa Options): Likewise.
1904 (Frame Directive): Delete.
1906 2004-11-04 Daniel Jacobowitz <dan@debian.org>
1908 * configure.in: Remove arm-*-oabi and thumb-*-oabi.
1909 * config/tc-arm.c (target_oabi): Delete.
1910 (md_apply_fix3, elf32_arm_target_format): Remove target_oabi checks.
1911 (arm_opts): Remove moabi.
1912 * doc/as.texinfo (Overview): Remove documentation of -moabi.
1913 * doc/c-arm.texi (ARM Options): Likewise.
1914 * configure: Regenerated.
1916 2004-11-04 Hans-Peter Nilsson <hp@axis.com>
1918 * configure.in (crisv32): Recognize. AC_DEFINE_UNQUOTED
1919 DEFAULT_CRIS_ARCH. Handle crisv32-*-linux-gnu* like
1920 cris-*-linux-gnu* and crisv32-*-* like cris-*-*.
1921 * configure: Regenerate.
1922 * config/tc-cris.c (enum cris_archs): New.
1923 (cris_mach, cris_arch_from_string, s_cris_arch, get_sup_reg)
1924 (cris_insn_ver_valid_for_arch): New functions.
1925 (DEFAULT_CRIS_ARCH): New macro, default to cris_any_v0_v10.
1926 (cris_arch): New variable.
1927 (md_pseudo_table): New pseudo .arch.
1928 (err_for_dangerous_mul_placement): Initialize according to
1930 (STATE_COND_BRANCH): Renamed from STATE_CONDITIONAL_BRANCH.
1932 (STATE_COND_BRANCH_V32, STATE_COND_BRANCH_COMMON)
1933 (STATE_ABS_BRANCH_V32, STATE_LAPC, BRANCH_BF_V32, BRANCH_BB_V32)
1934 (BRANCH_WF_V32, BRANCH_WB_V32): New.
1935 (BRANCH_BF, BRANCH_BB, BRANCH_WF, BRANCH_WB): Don't undef after
1936 use in md_cris_relax_table.
1937 (md_cris_relax_table): Add entries for STATE_COND_BRANCH_V32,
1938 STATE_COND_BRANCH_COMMON, STATE_ABS_BRANCH_V32, STATE_LAPC.
1939 Update and improve head comment.
1940 (OPTION_PIC): Define in terms of previous option, OPTION_US.
1941 (OPTION_MULBUG_ABORT_ON, OPTION_MULBUG_ABORT_OFF): Similar.
1943 (md_longopts): New option --march=...
1944 (cris_any_v0_v10_long_jump_size, crisv32_long_jump_size): New
1946 (md_long_jump_size): Initialize in terms of DEFAULT_CRIS_ARCH.
1947 (HANDLE_RELAXABLE): New macro.
1948 (md_estimate_size_before_relax): Use HANDLE_RELAXABLE for common
1949 cases. Check for weak symbols and assume not relaxable. Handle
1950 STATE_COND_BRANCH_V32, STATE_COND_BRANCH_COMMON,
1951 STATE_ABS_BRANCH_V32, STATE_LAPC. Use new variable symbolP, not
1953 (md_convert_frag): Handle STATE_COND_BRANCH_V32,
1954 STATE_COND_BRANCH_COMMON, STATE_ABS_BRANCH_V32, STATE_LAPC.
1955 (cris_create_short_jump): Adjust for CRISv32.
1956 (cris_relax_frag): Handle new states.
1957 (md_create_long_jump): Ditto. Emit error for common_v10_v32.
1958 (md_begin): Define symbols "..asm.arch.cris.v32",
1959 "..asm.arch.cris.v10", "..asm.arch.cris.common_v10_v32" and
1960 "..asm.arch.cris.any_v0_v10". Use cris_insn_ver_valid_for_arch
1961 when entering opcode table entry points.
1962 (md_assemble): Adjust branch handling for CRISv32. Handle LAPC
1963 relaxation. In fix_new_exp call for main insn, pass 1 for pcrel
1964 parameter for 8, 16 and 32-bit pc-relative insns and LAPC.
1965 (cris_process_instruction): Initialize out_insnp->insn_type to
1966 CRIS_INSN_NONE, not CRIS_INSN_NORMAL.
1967 <case ']', '[', 'A', 'd', 'Q', 'N', 'n', 'Y', 'U', 'u', 'T'>: New
1969 <case 'm'>: Check that modified_char == '.'.
1970 <invalid operands>: Consume the rest of the line.
1971 When operands don't match, skip over subsequent insns with
1972 non-matching version specifier but same mnemonic.
1973 <immediate constant, case SIZE_SPEC_REG>: Immediate operands for
1974 special registers in CRISv32 are always 32 bit long.
1975 <immediate constant, case SIZE_FIELD_SIGNED, SIZE_FIELD_UNSIGNED>:
1977 (get_gen_reg): Only recognize "PC" when followed by "+]" for v32
1978 and compatible. Recognize "ACR" for v32, unless followed by "+".
1979 (get_spec_reg): Consider cris_arch when looking up register.
1980 (get_autoinc_prefix_or_indir_op): Don't recognize assignment for
1982 (get_3op_or_dip_prefix_op): Check for ']' after seeing '[rN+'.
1983 (cris_get_expression): Restore input_line_pointer if failing "early".
1984 (get_flags): Consider cris_arch and recognize flags accordingly.
1985 (branch_disp): Adjust for CRISv32.
1986 (gen_cond_branch_32): Similar. Emit error for common_v10_v32.
1987 (cris_number_to_imm): Use as_bad_where, not as_bad. Remove
1988 related FIXME. Don't insist on BFD_RELOC_32_PCREL fixup to be
1989 resolved. Don't enter zeros in object file for
1991 <case BFD_RELOC_CRIS_LAPCQ_OFFSET, BFD_RELOC_CRIS_SIGNED_16>
1992 <case BFD_RELOC_CRIS_SIGNED_8>: New case.
1993 (md_parse_option): Break out "return 1".
1994 <OPTION_ARCH> New case.
1995 (tc_gen_reloc): <case BFD_RELOC_CRIS_LAPCQ_OFFSET>
1996 <case BFD_RELOC_CRIS_SIGNED_16, BFD_RELOC_CRIS_SIGNED_8>
1997 <case BFD_RELOC_CRIS_UNSIGNED_8, BFD_RELOC_CRIS_UNSIGNED_16>
1998 <case BFD_RELOC_32_PCREL>: New cases.
1999 Addends for non-zero fx_pcrel are too in fx_offset.
2000 (md_show_usage): Show --march=<arch>.
2001 (md_apply_fix3): Adjust val for BFD_RELOC_CRIS_LAPCQ_OFFSET.
2002 (md_pcrel_from): BFD_RELOC_CRIS_LAPCQ_OFFSET is PC-relative too.
2003 (s_syntax) <struct syntaxes>: Properly constify member operand.
2004 * config/tc-cris.h (TARGET_MACH): Define.
2005 (cris_mach): Declare.
2006 * doc/as.texinfo (Overview) <CRIS>: Add --march=...
2007 * doc/c-cris.texi (CRIS-Symbols): New node for built-in symbols.
2008 (CRIS-Opts): Document --march=...
2009 (CRIS-Pseudos): Document .arch.
2011 2004-11-04 Jan Beulich <jbeulich@novell.com>
2013 * config/tc-i386.c (set_intel_syntax): Allow % in symbol names when
2014 intel syntax and no register prefix, allow $ in symbol names when
2016 (set_16bit_gcc_code_flag): Replace literal 'l' by LONG_MNEM_SUFFIX.
2017 (intel_float_operand): Add fourth return value indicating math control
2018 operations. Make classification more precise.
2019 (md_assemble): Complain if memory operand of mov[sz]x has no size
2021 (parse_insn): Translate word operands to floating point instructions
2022 operating on integers as well as control instructions to short ones
2023 as expected by AT&T syntax. Translate 'd' suffix to short one only for
2024 floating point instructions operating on non-integer operands.
2025 (match_template): Remove fldcw special case. Adjust q-suffix handling
2026 to permit it on fild/fistp/fisttp in AT&T mode.
2027 (process_suffix): Don't guess DefaultSize insns' suffix from
2028 stackop_size for certain floating point control instructions. Guess
2029 suffix for branch and [ls][gi]dt based on flag_code. Split error
2030 messages for Intel and AT&T syntax, and make the condition more strict
2031 for the former. Adjust suppressing of generation of operand size
2033 (intel parser): Allow the full set of MASM operators. Add FWORD, TBYTE,
2034 OWORD, and XMMWORD operand size specifiers (TBYTE replaces XWORD). Add
2035 more error checking.
2036 * config/tc-i386.h (BYTE_PTR WORD_PTR DWORD_PTR QWORD_PTR XWORD_PTR
2037 SHORT OFFSET_FLAT FLAT NONE_FOUND): Remove unused defines.
2039 2004-11-03 Hans-Peter Nilsson <hp@axis.com>
2041 * symbols.c (colon) [!WORKING_DOT_WORD]: Don't declare
2042 md_short_jump_size, md_long_jump_size.
2043 * write.c [!WORKING_DOT_WORD]: Ditto.
2044 * tc.h [!WORKING_DOT_WORD]: Declare them here. Drop const
2046 * config/tc-cris.h (md_short_jump_size, md_long_jump_size): Don't
2048 * config/tc-cris.c (md_short_jump_size, md_long_jump_size): Drop
2049 const qualifier in these definitions.
2050 * config/tc-i370.c, config/tc-m68k.c, config/tc-pdp11.c,
2051 config/tc-s390.c, config/tc-tahoe.c, config/tc-vax.c: Ditto.
2053 2004-11-02 Nick Clifton <nickc@redhat.com>
2055 * dwarf2dbg.c (dwarf2_finish): Check for the existence of a file
2056 table before deciding to produce a .debug_line section to match up
2057 with a user provided .debug_info section.
2059 2004-10-28 Tomer Levi <Tomer.Levi@nsc.com>
2061 * config/tc-crx.c (getreg_image): Bug fix, a return value was
2062 mistakenly omitted from CRX_C_REGTYPE and CRX_CS_REGTYPE cases.
2064 2004-10-27 Tomer Levi <Tomer.Levi@nsc.com>
2066 * config/tc-crx.c: Remove global variable 'post_inc_mode'.
2067 (get_flags): New function.
2068 (get_number_of_bits): Edit comments, update numeric values to
2070 (process_label_constant): Don't support the colon
2071 format (SYMBOL:[s|m|l]).
2072 (set_cons_rparams): Support argument type 'arg_rbase'.
2073 (get_operandtype): Bug fix in 'rbase' operand type parsing.
2074 (handle_LoadStor): Bug fix, first handle post-increment mode.
2075 (getreg_image): Remove redundant code, update according to latest
2077 (print_constant): Bug fix relate to 3-word instructions.
2078 (assemble_insn): Bug fix, when matching instructions, verify also
2079 instruction type (not only mnemonic).
2080 Add various error checking.
2081 (preprocess_reglist): Support HI/LO and user registers.
2083 2004-10-25 David Mosberger-Tang <davidm@hpl.hp.com>
2085 * config/tc-ia64.c (fixup_unw_records): Don't let the "t" value
2086 in an epilogue directive go negative.
2088 2004-10-25 H.J. Lu <hongjiu.lu@intel.com>
2091 * config/tc-ia64.c (emit_one_bundle): Decrement md.num_slots_in_use
2092 after reporting template error during manual bundling. Reported
2093 by Michael Dupont, michaelx.dupont@intel.com.
2095 2004-10-25 Daniel Jacobowitz <dan@debian.org>
2097 * Makefile.am: Run dep-am.
2098 * aclocal.m4: Regenerate with automake 1.9.2.
2099 * Makefile.in: Regenerate with automake 1.9.2.
2100 * doc/Makefile.in: Likewise.
2102 * config/tc-arm.c: Include "dw2gencfi.h".
2103 (tc_arm_regname_to_dw2regnum, tc_arm_frame_initial_instructions):
2105 * config/tc-arm.h (TARGET_USE_CFIPOP, DWARF2_DEFAULT_RETURN_COLUMN)
2106 (DWARF2_CIE_DATA_ALIGNMENT, tc_regname_to_dw2regnum)
2107 (tc_cfi_frame_initial_instructions): Define.
2108 (tc_arm_regname_to_dw2regnum, tc_arm_frame_initial_instructions):
2111 2004-10-21 Tomer Levi <Tomer.Levi@nsc.com>
2113 * config/tc-crx.c (assemble_insn): Check unsigned immediate
2115 Update coprocessor id to be unsigned immediate.
2117 2004-10-18 Aaron W. LaFramboise <aaron98wiridge9@aaronwl.com>
2119 * config/tc-i386.c (O_secrel): Delete.
2120 (tc_pe_dwarf2_emit_offset): New function.
2121 * config/tc-i386.h (O_secrel): Define as O_md1.
2122 (TC_DWARF2_EMIT_OFFSET): Define.
2124 2004-10-18 Nick Clifton <nickc@redhat.com>
2126 * config/tc-xstormy16.c (xstormy16_cons_fix_new): Accept and
2127 ignore @fptr() directives for 4-byte fixups.
2129 2004-10-15 Alan Modra <amodra@bigpond.net.au>
2131 * Makefile.am: Run "make dep-am"
2132 * Makefile.in: Regenerate.
2134 2004-10-14 Bob Wilson <bob.wilson@acm.org>
2136 * doc/c-xtensa.texi (Xtensa Options, Absolute Literals Directive):
2137 Remove comments about placement of literal pools.
2138 (Literal Directive): Update description of literal placement.
2139 (Literal Prefix Directive): Remove statement that this does not apply
2140 to absolute-mode literals. Describe new section naming scheme.
2142 2004-10-12 Bob Wilson <bob.wilson@acm.org>
2144 * config/tc-xtensa.c (xtensa_frequency_pseudo): Use set_subseg_freq.
2145 (is_entry_opcode, is_movi_opcode, is_the_loop_opcode, is_jx_opcode,
2146 is_windowed_return_opcode): Delete.
2147 (xtensa_frob_label): Use get_subseg_target_freq.
2148 (md_assemble): Inline call to is_entry_opcode.
2149 (xtensa_handle_align): Inline call to get_frag_is_literal.
2150 (relaxation_requirements): Inline call to is_jx_opcode.
2151 (emit_single_op): Inline call to is_movi_opcode.
2152 (xg_assemble_vliw_tokens): Inline calls to get_frag_is_insn,
2153 get_frag_is_no_transform, is_entry_opcode, and
2154 set_frag_is_specific_opcode. Use get_subseg_total_freq.
2155 (xtensa_fix_a0_b_retw_frags, xtensa_fix_b_j_loop_end_frags,
2156 xtensa_fix_close_loop_end_frags, relax_frag_immed, convert_frag_immed):
2157 Inline calls to get_frag_is_no_transform.
2158 (next_instrs_are_b_retw): Inline call to is_windowed_return_opcode.
2159 (xtensa_fix_short_loop_frags): Inline calls to is_the_loop_opcode and
2160 get_frag_is_no_transform.
2161 (convert_frag_immed_finish_loop): Inline calls to get_expression_value
2162 and set_frag_is_no_transform.
2163 (get_expression_value): Delete.
2164 (subseg_map struct): Rename cur_total_freq to total_freq. Rename
2165 cur_target_freq to target_freq.
2166 (get_subseg_info): Split out code to create a new map entry into ...
2167 (add_subseg_info): ... this new function.
2168 (get_last_insn_flags): Check if get_subseg_info succeeded.
2169 (set_last_insn_flags): Call add_subseg_info if needed.
2170 (get_subseg_total_freq, get_subseg_target_freq, set_subseg_freq): New.
2171 (xtensa_reorder_segments): Compute last_sec while counting sections.
2172 Remove call to get_last_sec.
2173 (get_last_sec): Delete.
2174 (cache_literal_section): Inline call to retrieve_literal_seg and its
2175 callees, seg_present and add_seg_list.
2176 (retrieve_literal_seg, seg_present, add_seg_list): Delete.
2177 (get_frag_is_insn, get_frag_is_no_transform,
2178 set_frag_is_specific_opcode, set_frag_is_no_transform): Delete.
2179 * config/tc-xtensa.h (MAX_SLOTS): Reduce from 31 to 15.
2181 2004-10-12 Bob Wilson <bob.wilson@acm.org>
2183 * config/tc-xtensa.c: Use ISO C90 formatting.
2184 * config/tc-xtensa.h: Likewise.
2185 * config/xtensa-istack.h: Likewise.
2186 * config/xtensa-relax.c: Likewise.
2187 * config/xtensa-relax.h: Likewise.
2189 2004-10-12 Paul Brook <paul@codesourcery.com>
2191 * config/tc-arm.c (md_begin): Change EF_ARM_EABI_VER3 to
2194 * doc/c-arm.texi: Document that we actually support -meabi=4, not
2197 2004-10-08 Bob Wilson <bob.wilson@acm.org>
2199 * doc/as.texinfo (VTableEntry, VTableInherit): Add "directive" to index
2201 (Acknowledgements): Use "GAS" instead of AS variable.
2203 2004-10-08 Daniel Jacobowitz <dan@debian.org>
2205 * config/tc-i386.c: Include "elf/x86-64.h".
2206 (i386_elf_section_type): New function.
2207 * config/tc-i386.h (md_elf_section_type): Define.
2208 (i386_elf_section_type): New prototype.
2210 2004-10-08 Linus Nielsen Feltzing <linus@haxx.se>
2212 * config/m68k-parse.h (enum m68k_register): New control register,
2214 * config/tc-m68k.c: Correct control register set for MCF5249.
2216 2004-10-07 Bob Wilson <bob.wilson@acm.org>
2217 Sterling Augustine <sterling@tensilica.com>
2219 * config/tc-xtensa.c (absolute_literals_supported): New global flag.
2220 (UNREACHABLE_MAX_WIDTH): Define.
2221 (XTENSA_FETCH_WIDTH): Delete.
2222 (cur_vinsn, xtensa_fetch_width, xt_saved_debug_type, past_xtensa_end,
2223 prefer_const16, prefer_l32r): New global variables.
2224 (LIT4_SECTION_NAME): Define.
2225 (lit4_state struct): Add lit4_seg_name and lit4_seg fields.
2226 (XTENSA_PROP_*, GET_XTENSA_PROP_*, SET_XTENSA_PROP_*): Define.
2227 (frag_flags struct): New.
2228 (xtensa_block_info struct): Move from tc-xtensa.h. Add flags field.
2229 (subseg_map struct): Add cur_total_freq and cur_target_freq fields.
2230 (bitfield, bit_is_set, set_bit, clear_bit): Define.
2231 (MAX_FORMATS): Define.
2232 (op_placement_info struct, op_placement_table): New.
2233 (O_pltrel, O_hi16, O_lo16): Define.
2234 (directiveE enum): Rename directive_generics to directive_transform.
2235 Delete directive_relax. Add directive_schedule,
2236 directive_absolute_literals, and directive_last_directive.
2237 (directive_info): Rename "generics" to "transform". Delete "relax".
2238 Add "schedule" and "absolute-literals".
2239 (directive_state): Adjust entries to match changes in directive_info.
2240 (xtensa_relax_statesE, RELAX_IMMED_MAXSTEPS): Move to tc-xtensa.h.
2241 (xtensa_const16_opcode, xtensa_movi_opcode, xtensa_movi_n_opcode,
2242 xtensa_l32r_opcode, xtensa_nop_opcode, xtensa_rsr_lcount_opcode): New.
2243 (xtensa_j_opcode, xtensa_rsr_opcode): Delete.
2244 (align_only_targets, software_a0_b_retw_interlock,
2245 software_avoid_b_j_loop_end, maybe_has_b_j_loop_end,
2246 software_avoid_short_loop, software_avoid_close_loop_end,
2247 software_avoid_all_short_loops, specific_opcode): Delete.
2248 (warn_unaligned_branch_targets): New.
2249 (workaround_a0_b_retw, workaround_b_j_loop_end, workaround_short_loop,
2250 workaround_close_loop_end, workaround_all_short_loops): Default FALSE.
2251 (option_[no_]link_relax, option_[no_]transform,
2252 option_[no_]absolute_literals, option_warn_unaligned_targets,
2253 option_prefer_l32r, option_prefer_const16, option_target_hardware):
2255 (option_[no_]align_only_targets, option_literal_section_name,
2256 option_text_section_name, option_data_section_name,
2257 option_bss_section_name, option_eb, option_el): Delete.
2258 (md_longopts): Add entries for: [no-]transform, [no-]absolute-literals,
2259 warn-unaligned-targets, prefer-l32r, prefer-const16, [no-]link-relax,
2260 and target-hardware. Delete entries for [no-]target-align-only,
2261 literal-section-name, text-section-name, data-section-name, and
2263 (md_parse_option): Handle new options and remove old ones. Accept but
2264 ignore [no-]density options. Warn for [no-]generics and [no-]relax
2265 and treat them as [no-]transform.
2266 (md_show_usage): Add new options and remove old ones.
2267 (xtensa_setup_hw_workarounds): New.
2268 (md_pseudo_table): Change "word" entry to use xtensa_elf_cons. Add
2269 "long", "short", "loc" and "frequency" entries.
2270 (use_generics): Rename to ...
2271 (use_transform): ... this function. Add past_xtensa_end check.
2272 (use_longcalls): Add past_xtensa_end check.
2273 (code_density_available, can_relax): Delete.
2274 (do_align_targets): New.
2275 (get_directive): Accept dashes in directive names. Warn about
2276 [no-]generics and [no-]relax directives and treat them as
2278 (xtensa_begin_directive): Call md_flush_pending_output only for some
2279 directives. Check for directives inside instruction bundles. Warn
2280 about deprecated ".begin literal" usage. Warn and ignore [no-]density
2281 directives. Handle new directives. Check generating_literals flag
2283 (xtensa_end_directive): Check for directives inside instruction
2284 bundles. Warn and ignore [no-]density directives. Handle new
2285 directives. Call xtensa_set_frag_assembly_state.
2286 (xtensa_loc_directive_seen, xtensa_dwarf2_directive_loc,
2287 xtensa_dwarf2_emit_insn): New.
2288 (xtensa_literal_position): Call md_flush_pending_output. Do not check
2289 use_literal_section flag.
2290 (xtensa_literal_pseudo): Call md_flush_pending_output. Handle absolute
2291 literals. Use xtensa_elf_cons to parse the expression.
2292 (xtensa_literal_prefix): Do not check use_literal_section. Support
2293 ".lit4" sections for absolute literals. Change prefix convention to
2294 replace ".text" (or ".t" in a linkonce section). No need to call
2296 (xtensa_frequency_pseudo, xtensa_elf_cons, xtensa_elf_suffix): New.
2297 (expression_end): Handle closing braces and colons.
2298 (PLT_SUFFIX, plt_suffix): Delete.
2299 (expression_maybe_register): Use new xtensa-isa.h functions. Use
2300 xtensa_elf_suffix instead of checking for plt suffix, and handle O_lo16
2301 and O_hi16 expressions as well.
2302 (tokenize_arguments): Handle closing braces and colons.
2303 (parse_arguments): Use new xtensa-isa.h functions. Handle "invisible"
2304 operands and paired register syntax.
2305 (get_invisible_operands): New.
2306 (xg_translate_sysreg_op): Handle new Xtensa LX RSR/WSR/XSR syntax. Use
2307 new xtensa-isa.h functions.
2308 (xtensa_translate_old_userreg_ops, xtensa_translate_zero_immed): New.
2309 (xg_translate_idioms): Check if inside bundle. Use use_transform.
2310 Handle new Xtensa LX RSR/WSR/XSR syntax. Remove code to widen density
2311 instructions. Use xtensa_translate_zero_immed.
2312 (operand_is_immed, operand_is_pcrel_label): Delete.
2313 (get_relaxable_immed): Use new xtensa-isa.h functions.
2314 (get_opcode_from_buf): Add slot parameter. Use new xtensa-isa.h
2316 (xtensa_print_insn_table, print_vliw_insn): New.
2317 (is_direct_call_opcode): Use new xtensa-isa.h functions.
2318 (is_call_opcode, is_loop_opcode, is_conditional_branch_opcode,
2319 is_branch_or_jump_opcode): Delete.
2320 (is_movi_opcode, decode_reloc, encode_reloc, encode_alt_reloc): New.
2321 (opnum_to_reloc, reloc_to_opnum): Delete.
2322 (xtensa_insnbuf_set_operand, xtensa_insnbuf_get_operand): Use new
2323 xtensa-isa.h functions. Operate on one slot of an instruction.
2324 (xtensa_insnbuf_set_immediate_field, is_negatable_branch,
2325 xg_get_insn_size): Delete.
2326 (xg_get_build_instr_size): Use xg_get_single_size.
2327 (xg_is_narrow_insn, xg_is_single_relaxable_insn): Update calls to
2328 xg_build_widen_table. Use xg_get_single_size.
2329 (xg_get_max_narrow_insn_size): Delete.
2330 (xg_get_max_insn_widen_size, xg_get_max_insn_widen_literal_size,
2331 xg_is_relaxable_insn): Update calls to xg_build_widen_table. Use
2333 (xg_build_to_insn): Record the loc field. Handle OP_OPERAND_HI16U and
2334 OP_OPERAND_LOW16U. Check xg_valid_literal_expression.
2335 (xg_expand_to_stack, xg_expand_narrow): Update calls to
2336 xg_build_widen_table. Use xg_get_single_size.
2337 (xg_immeds_fit): Use new xtensa-isa.h functions. Update call to
2339 (xg_symbolic_immeds_fit): Likewise. Also handle O_lo16 and O_hi16, and
2340 treat weak symbols conservatively.
2341 (xg_check_operand): Use new xtensa-isa.h functions.
2342 (is_dnrange): Delete.
2343 (xg_assembly_relax): Inline previous calls to tinsn_copy.
2344 (xg_finish_frag): Specify separate relax states for the frag and slot0.
2345 (is_branch_jmp_to_next, xg_add_branch_and_loop_targets): Use new
2346 xtensa-isa.h functions.
2347 (xg_instruction_matches_option_term, xg_instruction_matches_or_options,
2348 xg_instruction_matches_options): New.
2349 (xg_instruction_matches_rule): Handle O_register expressions. Call
2350 xg_instruction_matches_options.
2351 (transition_rule_cmp): New.
2352 (xg_instruction_match): Update call to xg_build_simplify_table.
2353 (xg_build_token_insn): Record loc fields.
2354 (xg_simplify_insn): Check is_specific_opcode field and
2355 density_supported flag.
2356 (xg_expand_assembly_insn): Skip checking code_density_available. Use
2357 new xtensa-isa.h functions. Call use_transform instead of can_relax.
2358 (xg_assemble_literal): Add error handling for O_big. Call
2359 record_alignment. Handle O_pltrel.
2360 (xg_valid_literal_expression): New.
2361 (xg_assemble_literal_space): Add slot parameter. Remove call to
2362 set_expr_symbol_offset. Add call to record_alignment. Update call to
2364 (xg_emit_insn): Delete.
2365 (xg_emit_insn_to_buf): Add format parameter. Update calls to
2366 xg_add_opcode_fix and xtensa_insnbuf_to_chars.
2367 (xg_add_opcode_fix): Change opcode parameter to tinsn and add format
2368 and slot parameters. Handle new "alternate" relocations for absolute
2369 literals and CONST16 instructions. Check for bad uses of O_lo16 and
2370 O_hi16. Use new xtensa-isa.h functions.
2371 (xg_assemble_tokens): Delete.
2372 (is_register_writer): Use new xtensa-isa.h functions.
2373 (is_bad_loopend_opcode): Check for xtensa_rsr_lcount_opcode instead of
2374 old-style RSR from LCOUNT.
2375 (next_frag_opcode): Delete.
2376 (next_frag_opcode_is_loop, next_frag_format_size, frag_format_size,
2377 update_next_frag_state): New.
2378 (update_next_frag_nop_state): Delete.
2379 (next_frag_pre_opcode_bytes): Use next_frag_opcode_is_loop.
2380 (xtensa_mark_literal_pool_location): Check use_literal_section flag and
2381 the state of the absolute-literals directive. Add calls to
2382 record_alignment and xtensa_set_frag_assembly_state. Call
2383 xtensa_switch_to_non_abs_literal_fragment instead of
2384 xtensa_switch_to_literal_fragment.
2386 (assemble_nop): Use build_nop. Update call to xtensa_insnbuf_to_chars.
2387 (get_expanded_loop_offset): Change check for undefined opcode to an
2389 (xtensa_set_frag_assembly_state, relaxable_section,
2390 xtensa_find_unmarked_state_frags, xtensa_find_unaligned_branch_targets,
2391 xtensa_find_unaligned_loops, xg_apply_tentative_value): New.
2392 (md_begin): Update call to xtensa_isa_init. Initialize linkrelax to 1.
2393 Set lit4_seg_name. Call xg_init_vinsn. Initialize new global opcodes.
2394 Call init_op_placement_info_table and xtensa_set_frag_assembly_state.
2395 (xtensa_init_fix_data): New.
2396 (xtensa_frob_label): Reset label symbol to the current frag. Check
2397 do_align_targets and generating_literals flag. Propagate frequency
2398 info to new alignment frag. Call xtensa_set_frag_assembly_state.
2399 (xtensa_unrecognized_line): New.
2400 (xtensa_flush_pending_output): Check if inside a bundle. Add a call
2401 to xtensa_set_frag_assembly_state.
2402 (error_reset_cur_vinsn): New.
2403 (md_assemble): Remove check for literal frag. Remove call to
2404 istack_init. Call use_transform instead of use_generics. Parse
2405 explicit instruction format specifiers. Move code for
2406 a0_b_retw_interlock workaround to xg_assemble_vliw_tokens. Call
2407 error_reset_cur_vinsn on errors. Add call to get_invisible_operands.
2408 Add dwarf2_where call. Remote automatic alignment for ENTRY
2409 instructions. Move call to xtensa_clear_insn_labels to the end.
2410 Rearrange to handle bundles.
2411 (xtensa_cons_fix_new): Delete.
2412 (xtensa_handle_align): New.
2413 (xtensa_frag_init): Call xtensa_set_frag_assembly_state. Remove
2414 assignment to is_no_density field.
2415 (md_pcrel_from): Use new xtensa-isa.h functions. Use decode_reloc
2416 instead of reloc_to_opnum. Handle "alternate" relocations.
2417 (xtensa_force_relocation, xtensa_check_inside_bundle,
2418 xtensa_elf_section_change_hook): New.
2419 (xtensa_symbol_new_hook): Delete.
2420 (xtensa_fix_adjustable): Check for difference of symbols with an
2421 offset. Check for external and weak symbols.
2422 (md_apply_fix3): Remove cases for XTENSA_OP{0,1,2} relocs.
2423 (md_estimate_size_before_relax): Return expansion for the first slot.
2424 (tc_gen_reloc): Handle difference of symbols by producing
2425 XTENSA_DIFF{8,16,32} relocs and by writing the value of the difference
2426 into the output. Handle new XTENSA_SLOT*_OP relocs by storing the
2427 tentative values into the output when linkrelax is set.
2428 (XTENSA_PROP_SEC_NAME): Define.
2429 (xtensa_post_relax_hook): Call xtensa_find_unmarked_state_frags.
2430 Create literal tables only if using literal sections. Create new
2431 property tables instead of old instruction tables. Check for unaligned
2432 branch targets and loops.
2433 (finish_vinsn, find_vinsn_conflicts, check_t1_t2_reads_and_writes,
2434 new_resource_table, clear_resource_table, resize_resource_table,
2435 resources_available, reserve_resources, release_resources,
2436 opcode_funcUnit_use_unit, opcode_funcUnit_use_stage,
2437 resources_conflict, xg_find_narrowest_format, relaxation_requirements,
2438 bundle_single_op, emit_single_op, xg_assemble_vliw_tokens): New.
2439 (xtensa_end): Call xtensa_flush_pending_output. Set past_xtensa_end
2440 flag. Update checks for workaround options. Call
2441 xtensa_mark_narrow_branches and xtensa_mark_zcl_first_insns.
2442 (xtensa_cleanup_align_frags): Add special case for branch targets.
2443 Check for and mark unreachable frags.
2444 (xtensa_fix_target_frags): Remove use of align_only_targets flag.
2445 Use RELAX_LOOP_END_BYTES in special case for negatable branch at the
2446 end of a zero-overhead loop body.
2447 (frag_can_negate_branch): Handle instructions with multiple slots.
2448 Use new xtensa-isa.h functions
2449 (xtensa_mark_narrow_branches, is_narrow_branch_guaranteed_in_range,
2450 xtensa_mark_zcl_first_insns): New.
2451 (xtensa_fix_a0_b_retw_frags, xtensa_fix_b_j_loop_end_frags): Error if
2452 transformations are disabled.
2453 (next_instrs_are_b_retw): Use new xtensa-isa.h functions. Handle
2454 multislot instructions.
2455 (xtensa_fix_close_loop_end_frags, xtensa_fix_short_loop_frags):
2456 Likewise. Also error if transformations are disabled.
2457 (unrelaxed_frag_max_size): New.
2458 (unrelaxed_frag_min_insn_count, unrelax_frag_has_b_j): Use new
2459 xtensa-isa.h functions.
2460 (xtensa_sanity_check, is_empty_loop, is_local_forward_loop): Use
2461 xtensa_opcode_is_loop instead of is_loop_opcode.
2462 (get_text_align_power): Replace as_fatal with assertion.
2463 (get_text_align_fill_size): Iterate instead of using modulus when
2465 (get_noop_aligned_address): Assert that this is for a machine-dependent
2466 RELAX_ALIGN_NEXT_OPCODE frag. Use next_frag_opcode_is_loop,
2467 xg_get_single_size, and frag_format_size.
2468 (get_widen_aligned_address): Rename to ...
2469 (get_aligned_diff): ... this function. Add max_diff parameter.
2470 Remove handling of rs_align/rs_align_code frags. Use
2471 next_frag_format_size, get_text_align_power, get_text_align_fill_size,
2472 next_frag_opcode_is_loop, and xg_get_single_size. Compute max_diff
2473 and pass it back to caller.
2474 (xtensa_relax_frag): Use relax_frag_loop_align. Add code for new
2475 RELAX_SLOTS, RELAX_MAYBE_UNREACHABLE, RELAX_MAYBE_DESIRE_ALIGN,
2476 RELAX_FILL_NOP, and RELAX_UNREACHABLE frag types. Check relax_seen.
2477 (relax_frag_text_align): Rename to ...
2478 (relax_frag_loop_align): ... this function. Assume loops can only be
2479 in the first slot of an instruction.
2480 (relax_frag_add_nop): Use assemble_nop instead of constructing an OR
2481 instruction. Remove call to frag_wane.
2482 (relax_frag_narrow): Rename to ...
2483 (relax_frag_for_align): ... this function. Extend to handle
2484 RELAX_FILL_NOP and RELAX_UNREACHABLE, as well as RELAX_SLOTS with
2485 RELAX_NARROW for the first slot.
2486 (find_address_of_next_align_frag, bytes_to_stretch): New.
2487 (future_alignment_required): Use find_address_of_next_align_frag and
2488 bytes_to_stretch. Look ahead to subsequent frags to make smarter
2489 alignment decisions.
2490 (relax_frag_immed): Add format, slot, and estimate_only parameters.
2491 Check if transformations are enabled for b_j_loop_end workaround.
2492 Use new xtensa-isa.h functions and handle multislot instructions.
2493 Update call to xg_assembly_relax.
2494 (md_convert_frag): Handle new RELAX_SLOTS, RELAX_UNREACHABLE,
2495 RELAX_MAYBE_UNREACHABLE, RELAX_MAYBE_DESIRE_ALIGN, and RELAX_FILL_NOP
2497 (convert_frag_narrow): Add segP, format and slot parameters. Call
2498 convert_frag_immed for branch instructions. Adjust calls to
2499 tinsn_from_chars, tinsn_immed_from_frag, and xg_emit_insn_to_buf. Use
2500 xg_get_single_size and xg_get_single_format.
2501 (convert_frag_fill_nop): New.
2502 (convert_frag_immed): Add format and slot parameters. Handle multislot
2503 instructions and use new xtensa-isa.h functions. Update calls to
2504 tinsn_immed_from_frag and xg_assembly_relax. Check if transformations
2505 enabled for b_j_loop_end workaround. Use build_nop instead of
2506 assemble_nop. Check is_specific_opcode flag. Check for unreachable
2507 frags. Use xg_get_single_size. Handle O_pltrel.
2508 (fix_new_exp_in_seg): Remove check for old plt flag.
2509 (convert_frag_immed_finish_loop): Update calls to tinsn_from_chars and
2510 xtensa_insnbuf_to_chars. Call tinsn_immed_from_frag. Change check
2511 for loop opcode to an assertion. Mark all frags up to the end of the
2512 loop as not transformable.
2513 (get_last_insn_flags, set_last_insn_flags): Use get_subseg_info.
2514 (get_subseg_info): New.
2515 (xtensa_move_literals): Call xtensa_set_frag_assembly_state. Add null
2517 (xtensa_switch_to_literal_fragment): Rewrite to handle absolute
2518 literals and use xtensa_switch_to_non_abs_literal_fragment otherwise.
2519 (xtensa_switch_to_non_abs_literal_fragment): New.
2520 (cache_literal_section): Add is_code parameter and pass it through to
2521 retrieve_literal_seg.
2522 (retrieve_literal_seg): Add is_code parameter and use it to set the
2523 flags on the literal section. Handle case where head parameter is 0.
2524 (get_frag_is_no_transform, set_frag_is_specific_opcode,
2525 set_frag_is_no_transform): New.
2526 (xtensa_create_property_segments): Add end_property_function parameter
2527 and pass it through to add_xt_block_frags. Call bfd_get_section_flags
2528 and skip SEC_DEBUGGING and !SEC_ALLOC sections.
2529 (xtensa_create_xproperty_segments, section_has_xproperty): New.
2530 (add_xt_block_frags): Add end_property_function parameter and call it
2531 if it is non-zero. Call xtensa_frag_flags_init.
2532 (xtensa_frag_flags_is_empty, xtensa_frag_flags_init,
2533 get_frag_property_flags, frag_flags_to_number,
2534 xtensa_frag_flags_combinable, xt_block_aligned_size,
2535 xtensa_xt_block_combine, add_xt_prop_frags,
2536 init_op_placement_info_table, opcode_fits_format_slot,
2537 xg_get_single_size, xg_get_single_format): New.
2538 (istack_push): Inline call to tinsn_copy.
2539 (tinsn_copy): Delete.
2540 (tinsn_has_invalid_symbolic_operands): Handle O_hi16 and O_lo16 and
2541 CONST16 opcodes. Handle O_big, O_illegal, and O_absent.
2542 (tinsn_has_complex_operands): Handle O_hi16 and O_lo16.
2543 (tinsn_to_insnbuf): Use xg_get_single_format and new xtensa-isa.h
2544 functions. Handle invisible operands.
2545 (tinsn_to_slotbuf): New.
2546 (tinsn_check_arguments): Use new xtensa-isa.h functions.
2547 (tinsn_from_chars): Add slot parameter. Rewrite using xg_init_vinsn,
2548 vinsn_from_chars, and xg_free_vinsn.
2549 (tinsn_from_insnbuf): New.
2550 (tinsn_immed_from_frag): Add slot parameter and handle multislot
2551 instructions. Handle symbol differences.
2552 (get_num_stack_text_bytes): Use xg_get_single_size.
2553 (xg_init_vinsn, xg_clear_vinsn, vinsn_has_specific_opcodes,
2554 xg_free_vinsn, vinsn_to_insnbuf, vinsn_from_chars, expr_is_register,
2555 get_expr_register, set_expr_symbol_offset_diff): New.
2556 * config/tc-xtensa.h (MAX_SLOTS): Define.
2557 (xtensa_relax_statesE): Move from tc-xtensa.c. Add
2558 RELAX_CHECK_ALIGN_NEXT_OPCODE, RELAX_MAYBE_DESIRE_ALIGN, RELAX_SLOTS,
2559 RELAX_FILL_NOP, RELAX_UNREACHABLE, RELAX_MAYBE_UNREACHABLE, and
2561 (RELAX_IMMED_MAXSTEPS): Move from tc-xtensa.c.
2562 (xtensa_frag_type struct): Add is_assembly_state_set,
2563 use_absolute_literals, relax_seen, is_unreachable, is_specific_opcode,
2564 is_align, is_text_align, alignment, and is_first_loop_insn fields.
2565 Replace is_generics and is_relax fields by is_no_transform field.
2566 Delete is_text and is_longcalls fields. Change text_expansion and
2567 literal_expansion to arrays of MAX_SLOTS entries. Add arrays of
2568 per-slot information: literal_frags, slot_subtypes, slot_symbols,
2569 slot_sub_symbols, and slot_offsets. Add fr_prev field.
2570 (xtensa_fix_data struct): New.
2571 (xtensa_symfield_type struct): Delete plt field.
2572 (xtensa_block_info struct): Move definition to tc-xtensa.h. Add
2573 forward declaration here.
2574 (xt_section_type enum): Delete xt_insn_sec. Add xt_prop_sec.
2575 (XTENSA_SECTION_RENAME): Undefine.
2576 (TC_FIX_TYPE, TC_INIT_FIX_DATA, TC_FORCE_RELOCATION, NO_PSEUDO_DOT,
2577 tc_unrecognized_line, md_do_align, md_elf_section_change_hook,
2578 HANDLE_ALIGN, TC_LINKRELAX_FIXUP, SUB_SEGMENT_ALIGN): Define.
2579 (TC_CONS_FIX_NEW, tc_symbol_new_hook): Delete.
2580 (unit_num_copies_func, opcode_num_units_func,
2581 opcode_funcUnit_use_unit_func, opcode_funcUnit_use_stage_func): New.
2582 (resource_table struct): New.
2583 * config/xtensa-istack.h (MAX_INSN_ARGS): Increase from 6 to 10.
2584 (TInsn struct): Add keep_wide, loc, fixup, record_fix, subtype,
2585 literal_space, symbol, sub_symbol, offset, and literal_frag fields.
2586 (tinsn_copy): Delete prototype.
2587 (vliw_insn struct): New.
2588 * config/xtensa-relax.c (insn_pattern_struct): Add options field.
2589 (widen_spec_list): Add option conditions for density and boolean
2590 instructions. Add expansions using CONST16 and conditions for using
2591 CONST16 vs. L32R. Use new Xtensa LX RSR/WSR syntax. Add entries for
2593 (simplify_spec_list): Add option conditions for density instructions.
2594 Add entry for NOP instruction.
2595 (append_transition): Add cmp function pointer parameter and use it to
2596 insert the new entry in order.
2597 (operand_function_LOW16U, operand_function_HI16U): New.
2598 (xg_has_userdef_op_fn, xg_apply_userdef_op_fn): Handle
2599 OP_OPERAND_LOW16U and OP_OPERAND_HI16U.
2600 (enter_opname, split_string): Use xstrdup instead of strdup.
2601 (init_insn_pattern): Initialize new options field.
2602 (clear_req_or_option_list, clear_req_option_list,
2603 clone_req_or_option_list, clone_req_option_list, parse_option_cond):
2605 (parse_insn_pattern): Parse option conditions.
2606 (transition_applies): New.
2607 (build_transition): Use new xtensa-isa.h functions. Fix incorrectly
2608 swapped last arguments in calls to append_constant_value_condition.
2609 Call clone_req_option_list. Add warning about invalid opcode.
2610 Handle LOW16U and HI16U function names.
2611 (build_transition_table): Add cmp parameter and use it in calls to
2612 append_transition. Use new xtensa-isa.h functions. Check
2613 transition_applies before adding entries.
2614 (xg_build_widen_table, xg_build_simplify_table): Add cmp parameter and
2615 pass it through to build_transition_table.
2616 * config/xtensa-relax.h (ReqOrOptionList, ReqOrOption, ReqOptionList,
2617 ReqOption, transition_cmp_fn): New types.
2618 (OpType enum): Add OP_OPERAND_LOW16U and OP_OPERAND_HI16U.
2619 (transition_rule struct): Add options field.
2620 * doc/as.texinfo (Overview): Update Xtensa options.
2621 * doc/c-xtensa.texi (Xtensa Options): Delete --[no-]density,
2622 --[no-]relax, and --[no-]generics options. Update descriptions of
2623 --text-section-literals and --[no-]longcalls. Add
2624 --[no-]absolute-literals and --[no-]transform.
2625 (Xtensa Syntax): Add description of syntax for FLIX instructions.
2626 Remove use of "generic" and "specific" terminology for opcodes.
2627 (Xtensa Registers): Generalize the syntax description to include
2628 user-defined register files.
2629 (Xtensa Automatic Alignment): Update.
2630 (Xtensa Branch Relaxation): Mention limitation of unconditional jumps.
2631 (Xtensa Call Relaxation): Linker can now remove most of the overhead.
2632 (Xtensa Directives): Remove confusing rules about precedence.
2633 (Density Directive, Relax Directive): Delete.
2634 (Schedule Directive): New.
2635 (Generics Directive): Rename to ...
2636 (Transform Directive): ... this node.
2637 (Literal Directive): Update for absolute literals. Missing
2638 literal_position directive is now an error.
2639 (Literal Position Directive): Update for absolute literals.
2640 (Freeregs Directive): Delete.
2641 (Absolute Literals Directive): New.
2642 (Frame Directive): Minor editing.
2643 * Makefile.am (DEPTC_xtensa_elf, DEPOBJ_xtensa_elf, DEP_xtensa_elf):
2644 Update dependencies.
2645 * Makefile.in: Regenerate.
2647 2004-10-07 Richard Sandiford <rsandifo@redhat.com>
2649 * config/tc-mips.c (append_insn): Use fix_new rather than fix_new_exp
2650 to build the second and third fixups for a composite relocation.
2651 (macro_read_relocs): New function.
2652 (macro_build): Use it.
2653 (s_cpsetup): Pass all three composite relocation codes to macro_build.
2654 Simplify fragging code accordingly.
2655 (s_gpdword): Use fix_new rather than fix_new_exp for the second part
2656 of the composite relocation. Set fx_tcbit in both fixups.
2658 2004-10-07 Richard Sandiford <rsandifo@redhat.com>
2660 * config/tc-mips.c (append_insn): Set fx_tcbit for composite relocs.
2661 (md_apply_fix3): Don't treat composite relocs as done.
2663 2004-10-07 Jan Beulich <jbeulich@novell.com>
2665 * macro.c (macro_expand_body): When ELF, use .LL rather than LL as
2666 prefix for symbol names generated from the LOCAL macro directive.
2668 * dw2gencfi.c (select_cie_for_fde): When separating CIE out from
2669 FDE, treat a DW_CFA_remember_state as we do a DW_CFA_advance_loc.
2671 2004-10-07 Tomer Levi <Tomer.Levi@nsc.com>
2673 * config/tc-crx.c (preprocess_reglist): Handle Co-processor
2675 (md_assemble): Add error checking for Co-Processor instructions.
2676 (get_cinv_parameters): Add 'b' option to invalidate the
2677 branch-target cache.
2679 2004-10-05 Paul Brook <paul@codesourcery.com>
2681 * config/tc-arm.c (unwind): New variable.
2682 (vfp_sp_encode_reg): New function.
2683 (vfp_sp_reg_required_here): Use it.
2684 (vfp_sp_reg_list, vfp_dp_reg_list): Remove.
2685 (vfp_parse_reg_list): New function.
2686 (s_arm_unwind_fnstart, s_arm_unwind_fnend, s_arm_unwind_cantunwind,
2687 s_arm_unwind_personality, s_arm_unwind_personalityindex,
2688 s_arm_unwind_handlerdata, s_arm_unwind_save, s_arm_unwind_movsp,
2689 s_arm_unwind_pad, s_arm_unwind_setfp, s_arm_unwind_raw): New
2691 (md_pseudo_table): Add them.
2692 (do_vfp_reg2_from_sp2): Use vfp_parse_reg_list and vfp_sp_encode_reg.
2693 (do_vfp_sp2_from_reg2, vfp_sp_ldstm, vfp_dp_ldstm): Ditto.
2694 (set_section, add_unwind_adjustsp, flush_pending_unwind,
2695 finish_unwind_opcodes, start_unwind_section, create_unwind_entry,
2696 require_hashconst, add_unwind_opcode): New functions.
2697 * doc/c-arm.texi: Document unwinding opcodes.
2698 * NEWS: Mention the new feature.
2700 2004-10-04 Eric Christopher <echristo@redhat.com>
2702 * config/tc-mips.c (md_apply_fix3): Remove erroneous assert.
2704 2004-10-01 H.J. Lu <hongjiu.lu@intel.com>
2706 * config/tc-ppc.c (md_apply_fix3): Call S_SET_THREAD_LOCAL for
2708 * config/tc-s390.c (md_apply_fix3): Likewise.
2709 * config/tc-sparc.c (md_apply_fix3): Likewise.
2711 2004-10-01 Paul Brook <paul@codesourcery.com>
2713 * config/tc-arm.c (arm_elf_section_type): New function.
2714 (arm_elf_change_section): Set section link for exidx sections.
2715 * config/tc-arm.h (arm_elf_section_type): Add prototype.
2716 (md_elf_section_type): Define.
2718 2004-10-01 Bill Farmer <Bill@the-farmers.freeserve.co.uk>
2720 * config/tc-pdp11.c (md_apply_fix3): Change to sign of the SOB
2721 instruction's offset.
2723 2004-10-01 Adam Nemet <anemet@lnxw.com>
2725 * (TARGET_FORMAT): Remove LynxOS COFF definition.
2727 2004-10-01 Ravi Ramaseshan <ravi.ramaseshan@codito.com>
2729 * config/tc-arc.c (tc_gen_reloc): Don't assume fixP->fx_addsy is an
2730 asymbol *, instead use symbol_get_bfdsym.
2732 2004-09-30 Linus Nielsen Feltzing <linus@haxx.se>
2734 * config/tc-m68k.c (select_control_regs): Add mcf5249.
2736 2004-09-30 Paul Brook <paul@codesourcery.com>
2738 * config/tc-arm.c (do_smi, do_nop): New functions.
2739 (insns): Add ARMv6ZK instructions.
2740 (md_apply_fix3): Handle BFD_RELOC_ARM_SMI.
2741 (tc_gen_reloc): Ditto.
2742 (arm_cpus): Add mpcore and arm1176.
2743 (arm_archs): Add armv6{k,z,zk}.
2744 * doc/c-arm.texi: Document new cores and architectures.
2746 2004-09-30 Nick Clifton <nickc@redhat.com>
2748 * config/tc-arm.c: Use ISO C90 formatting.
2750 2004-09-30 Vladimir Ivanov <vladitx@nucleusys.com>
2752 * config/tc-arm.c (mav_reg_required_here): Allow REG_TYPE_CN
2753 as alternative when REG_TYPE_MVF, REG_TYPE_MVD, REG_TYPE_MVFX or
2754 REG_TYPE_MVDX is expected.
2756 2004-09-29 Marc Bevand <m.bevand@gmail.com>
2758 * doc/c-i386.texi (i386-Mnemonics): Fix typo.
2760 2004-09-21 James E Wilson <wilson@specifixinc.com>
2762 * config/tc-ia64.c (ENCODED_PSP_OFFSET): New.
2763 (output_rp_psprel, output_pfs_psprel, output_preds_psprel,
2764 output_spill_base, output_unat_psprel, output_lc_psprel,
2765 output_fpsr_psprel, output_priunat_psprel, output_bsp_psprel,
2766 output_bsprestore_psprel, output_rnat_psprel, output_spill_psprel,
2767 output_spill_psprel_p): Use it.
2769 2004-09-20 Tomer Levi <Tomer.Levi@nsc.com>
2771 * config/tc-crx.c (handle_LoadStor): New function.
2772 Handle load/stor unique instructions before parsing.
2774 2004-09-17 Paul Brook <paul@codesourcery.com>
2776 * config/tc-arm.c (s_arm_rel31): New funciton.
2777 (md_pseudo_table): Add .rel31.
2778 (md_apply_fix3): Handle BFD_RELOC_ARM_TARGET2,
2779 BFD_RELOC_32_PCREL and BFD_RELOC_ARM_PREL31.
2780 (tc_gen_reloc): Handle BFD_RELOC_ARM_PREL31 and BFD_RELOC_ARM_TARGET2.
2781 (arm_fix_adjustable): Return 0 for BFD_RELOC_ARM_TARGET2.
2782 (arm_parse_reloc): Add (target2).
2784 2004-09-17 Alan Modra <amodra@bigpond.net.au>
2786 * Makefile.am: Run "make dep-am".
2787 * Makefile.in: Regenerate.
2788 * aclocal.m4: Regenerate.
2789 * configure: Regenerate.
2790 * doc/Makefile.in: Regenerate.
2791 * po/POTFILES.in: Regenerate.
2792 * po/gas.pot: Regenerate.
2794 2004-09-14 Hideki IWAMOTO <h-iwamoto@kit.hi-ho.ne.jp>
2796 * config/tc-mmix.c [!LLONG_MIN]: Correct #elsif to #elif.
2797 [!LLONG_MAX]: Ditto.
2799 2004-09-13 Paul Brook <paul@codesourcery.com>
2801 * config/tc-arm.c: Rename RELABS to TARGET1.
2803 2004-09-13 Alan Modra <amodra@bigpond.net.au>
2805 * messages.c (as_internal_value_out_of_range): Cast values passed
2806 to as_bad_where or as_warn_where to proper type.
2808 2004-09-11 Theodore A. Roth <troth@openavr.org>
2810 * config/tc-avr.c: Add support for
2811 atmega48, atmega88, atmega168, attiny13, attiny2313, at90can128.
2813 2004-09-09 Alan Modra <amodra@bigpond.net.au>
2815 * dw2gencfi.c (select_cie_for_fde): When separating CIE out
2816 from FDE, treat a CFI_escape as we do a DW_CFA_advance_loc.
2818 2004-09-08 Paul Brook <paul@codesourcery.com>
2820 * config/obj-elf.c (obj_elf_section_type): Handle init_array,
2821 fini_array and preinit_array section types.
2822 * config/tc-ia64.c (ia64_elf_section_type): Remove init_array
2824 * doc/as.texinfo: Document extra section types.
2826 2004-09-02 Mark Mitchell <mark@codesourcery.com>
2828 * Makefile.am (TARG_ENV_HFILES): Add te-symbian.h.
2829 * Makefile.in: Regenerated.
2830 * configure.in: Set em for arm*-*-symbianelf*.
2831 * configure: Regenerated.
2832 * config/tc-arm.c (elf32_arm_target_format): Use Symbian target
2833 vectors when appropriate.
2834 * config/te-symbian.h: New file.
2836 2004-09-03 Tomer Levi <Tomer.Levi@nsc.com>
2838 * config/tc-crx.c (gettrap): Exception vector can be case
2840 (process_label_constant): Fix a 32-bit displacement bug in branch
2842 (get_operandtype) : Bug fix, wrong operand was used.
2843 (process_label_constant): Initialize relocation type to
2846 2004-09-01 Richard Earnshaw < reanrsha@arm.com>
2848 * tc-arm.c (arm_cpus, arm_fpus): Allow <cpu>-s as well as <cpu>s
2849 for synthesizable cores.
2851 * doc/c-arm.texi (ARM Options): Document canonical names of CPUs.
2853 2004-08-25 Dmitry Diky <diwil@spec.ru>
2855 * config/tc-msp430.c: Clean-up the code.
2856 (md_relax_table): New relax table.
2857 (mcu_types): Sort MCU types.
2858 (md_pseudo_table): Add .profiler pseudo handler.
2859 (pow2value): New function.
2860 (msp430_profiler): New function.
2861 (msp430_operands): Add new insns handlers.
2862 (msp430_srcoperand): Add register operand handler, allow complex
2864 (md_estimate_size_before_relax): Rewritten.
2865 (md_convert_frag): Rewritten.
2866 (msp430_relax_frag): New function.
2867 * config/tc-msp430.h (md_relax_frag): define macro
2868 * doc/c-msp430.texi: Update information.
2870 2004-08-24 Nick Clifton <nickc@redhat.com>
2872 * as.c (std_shortopts): Allow -g to take an optional argument.
2873 (parse_args): Pass any switch starting with -g on to the backend
2876 2004-08-18 Mark Mitchell <mark@codesourcery.com>
2878 * configure.in (arm*-*-symbianelf*): New target.
2879 (arm*-*-eabi*): Likewise.
2880 * configure: Regenerated.
2882 2004-08-18 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
2883 * config/tc-mips.c (append_insn): Handle delay slots in branch likely
2886 2004-08-18 Jakub Jelinek <jakub@redhat.com>
2888 * config/tc-ia64.c (start_unwind_section): Add linkonce_empty
2889 argument, don't do anything if current section is not
2890 .gnu.linkonce.t.* and linkonce_empty is set.
2891 (generate_unwind_image, dot_endp): Adjust callers, call
2892 start_unwind_section (*, 1) if nothing will be put into the
2895 2004-08-17 Nick Clifton <nickc@redhat.com>
2897 * as.c (MD_DEBUG_FORMAT_SELECTOR): Provide default definition.
2898 (show_usage): Add -g.
2899 (std_longopts): Add --gen-debug. Alpha sort the table.
2900 (parse_args): Print an error message if a switch is not handled.
2901 Handle the -g switch, calling md_debug_format_selector() if
2903 * NEWS: Mention new feature.
2904 * doc/as.texinfo: Document new switch.
2905 * doc/internals.texi: Document behaviour of md_parse_option.
2907 * config/tc-arm.c (md_parse_option): Do not issue an error message
2908 if the switch is not recognised.
2909 * config/tc-m68k.c (md_parse_option): Likewise.
2910 * config/tc-pdp11.c (md_parse_option): Likewise.
2911 * config/tc-v850.c (md_parse_option): Likewise.
2913 * as.h: Fix up formatting.
2916 2004-08-16 Nick Clifton <nickc@redhat.com>
2918 * macro.c (macro_set_alternate): Use ISO C90 formatting.
2920 * configure.in: Sort architecture based tables alphabetically.
2921 * configure: Regenerate.
2923 2004-08-16 Alan Modra <amodra@bigpond.net.au>
2925 * config/tc-ppc.c (tc_ppc_regname_to_dw2regnum <regnames>): Replace
2926 { "cc", 68 }, with { "cr", 70 }.
2928 2004-08-13 Jan Beulich <jbeulich@novell.com>
2929 Nick Clifton <nickc@redhat.com>
2931 * as.c: Add and handle new --alternate command line option.
2932 * macro.c (macro_set_alternate): New.
2933 * macro.h (macro_set_alternate): Declare.
2934 * read.c: Add and handle new .altmacro and .noaltmacro directives.
2935 * doc/as.texinfo: Document new command line option and pseudo-ops
2936 as well as insert documentation originating from gasp about
2937 alternate macro syntax.
2938 * NEWS: Mention new command line option and pseudo-ops.
2940 2004-08-10 Mark Mitchell <mark@codesourcery.com>
2942 * expr.c (operand): Handle the "~", "-", and "!" operators applied
2945 2004-08-06 Paul Brook <paul@codesourcery.com>
2947 * config/tc-arm.c (md_apply_fix3, tc_gen_reloc, arm_parse_reloc):
2948 Handle new relocations.
2949 * include/elf/arm.h (elf_arm_reloc_type): Add new EABI relocations.
2951 2004-08-05 Bob Wilson <bob.wilson@acm.org>
2953 * write.c (relax_segment): Use was_address instead of address when
2954 setting fr_fix field for align frag due to backwards .org.
2956 2004-07-29 Alexandre Oliva <aoliva@redhat.com>
2958 Introduce SH2a support.
2959 2004-02-24 Corinna Vinschen <vinschen@redhat.com>
2960 * config/tc-sh.c (get_specific): Change arch_sh2a_up to
2962 2004-02-24 Corinna Vinschen <vinschen@redhat.com>
2963 * config/tc-sh.c (md_parse_option): Add sh2a-nofpu ISA handling.
2964 2004-02-20 Corinna Vinschen <vinschen@redhat.com>
2965 * config/tc-sh.c (sh_elf_final_processing): Move sh2a recognition
2966 to end of conditional expression.
2967 2004-02-20 Corinna Vinschen <vinschen@redhat.com>
2968 * config/tc-sh.c: Add sh2a-nofpu support.
2969 2003-12-29 DJ Delorie <dj@redhat.com>
2970 * tc-sh.c: Add sh2a support.
2971 (parse_reg): Add tbr.
2972 (parse_at): Support @@(disp,tbr).
2973 (get_specific): Support sh2a opcodes.
2974 (insert4): New, for 4 byte relocs.
2975 (build_Mytes): Support sh2a opcodes.
2976 (md_apply_fix3_Mytes): Support sh2a opcodes.
2977 2003-12-02 Michael Snyder <msnyder@redhat.com>
2978 * config/tc-sh.c (md_parse_option): Handle sh2a.
2979 (sh_elf_final_processing): Ditto.
2981 2004-07-27 Jason Thorpe <thorpej@wasabisystems.com>
2983 * config/tc-hppa.h (TARGET_FORMAT): Set to "elf32-hppa-netbsd"
2986 2004-07-27 Alan Modra <amodra@bigpond.net.au>
2988 * config/tc-ppc.c (ppc_frob_file_before_adjust): Warn if .toc too big.
2989 (ppc_arch): Expand comment.
2991 2004-07-27 Tomer Levi <Tomer.Levi@nsc.com>
2993 * config/tc-crx.c: Support evaluating the difference between two
2995 * config/tc-crx.h: Likewise.
2997 2004-07-26 H.J. Lu <hongjiu.lu@intel.com>
2999 * config/tc-ia64.c (start_unwind_section): Set the linked-to
3001 (ia64_elf_section_change_hook): Set the linked-to section for
3004 2004-07-26 Dmitry Diky <diwil@spec.ru>
3006 * config/tc-msp430.c: Add new subtargets: msp430x1610,
3007 msp430x1611, msp430x1612, msp430x415, msp430x417, msp430xG437,
3008 msp430xG438, msp430xG439.
3010 2004-07-25 Daniel Jacobowitz <dan@debian.org>
3012 * doc/as.texinfo (Section, PushSection): Correct documentation
3015 2004-07-21 Jan Beulich <jbeulich@novell.com>
3017 * config/tc-i386.c (optimize_imm): Adjust immediates to only those
3018 permissible for the selected instruction suffix.
3019 (match_template): Don't permit 64-bit general purpose operands in
3021 (finalize_imm): Permit 64-bit immediates.
3022 (build_modrm_byte): Don't treat 32-bit addressing in 64-bit mode
3023 specially except for the width of the used base and/or index
3024 registers. For 32-bit displacements, use sign-extended
3025 relocations only when using 64-bit addressing.
3026 Force zero displacement on rip-relative addressing when there is
3027 no other displacement.
3028 (i386_index_check): Don't treat 32-bit addressing in 64-bit mode
3029 specially except for the width of the used base and/or index
3031 (parse_register): Disallow Reg64 registers in 32-bit mode.
3033 * config/tc-i386.c: For DefaultSize instructions, don't guess a 'q'
3034 suffix if the instruction doesn't support it.
3036 2004-07-20 Maciej W. Rozycki <macro@linux-mips.org>
3038 * config/tc-mips.c (append_insn): Handle constant expressions with
3039 no associated relocation.
3040 (mips_ip): Cancel the expression after use for the Q format
3042 (parse_relocation): Return no relocation for unsupported
3044 (my_getSmallExpression): Return no relocation if no relocation
3047 2004-07-19 John David Anglin <dave.anglin@nrc-cnrc.gc.ca>
3049 * config/obj-som.c (adjust_stab_sections): Add prototype.
3050 (obj_som_compiler, obj_som_version, obj_som_copyright,
3051 adjust_stab_sections): Add ATTRIBUTE_UNUSED to unused arguments.
3052 * config/tc-hppa.c (update_subspace): Likewise.
3053 (is_defined_subspace): Amplify comment.
3054 * config/obj-som.h (som_frob_file): Add prototype.
3056 2004-07-19 Christopher Faylor <cgf@timesys.com>
3057 H.J. Lu <hongjiu.lu@intel.com>
3059 * subsegs.c (section_symbol): Don't create a new segment when
3060 existing segment is undefined.
3062 2004-07-16 Richard Earnshaw <rearnsha@arm.com>
3064 * config/tc-arm.c: Include include/opcode/arm.h.
3065 (ARM_EXT_*, ARM_ARCH_*, ARM_ANY, ARM_ALL, COPROC_ANY): Delete.
3066 (FPU_FPA_EXT_* FPU_VFP_EXT_*, FPU_ANY, FPU_NONE, FPU_MAVERICK): Delete.
3067 (FPU_ARCH_*): Delete.
3068 * Makefile.am: Update dependencies.
3069 * Makefile.in: Regenerate.
3071 2004-07-15 Nick Clifton <nickc@redhat.com>
3073 * configure.in: Accept armbe as a big-endian arm configuration.
3074 * configure: Regenerate.
3076 2004-07-13 Thomas Nystrom <thn@saeab.se>
3078 * config/tc-i386.c (T_SHIFTOP): New constant.
3079 (intel_e05_1): Handle '&', '|' and T_SHIFTOP.
3080 (intel_el1): Handle '~'.
3081 (intel_get_token): Handle '<>', '&', '|' and '~'.
3083 2004-07-13 Nick Clifton <nickc@redhat.com>
3085 (md_assemble): Remove spurious newline from end of as_bad error
3087 (intel_e05_1): Likewise.
3088 (intel_e11): Likewise.
3089 (intel_match_token): Likewise.
3091 2004-07-11 Andreas Schwab <schwab@suse.de>
3093 * config/tc-m68k.c: Convert to C90. Remove redundant
3094 declarations. Indentation fixup.
3095 [M68KCOFF]: Include "obj-coff.h" instead of declaring
3096 obj_coff_section ourselves.
3098 2004-07-09 James E Wilson <wilson@specifixinc.com>
3100 * config/tc-ia64.c (default_big_endian): New.
3101 (dot_byteorder, md_begin): Use it.
3102 (md_parse_option): Set it.
3104 2004-07-09 Nick Clifton <nickc@redhat.com>
3106 * configure.in: Change sh-sybmian-elf to sh-*-symbianelf.
3107 * configure: Regenerate.
3108 * NEWS: Change sh-sybmian-elf to sh-*-symbianelf.
3109 * config/tc-sh.c (sh_elf_final_processing): Use renamed version of
3110 sh_find_elf_flags if necessary.
3112 2004-07-08 Richard Sandiford <rsandifo@redhat.com>
3114 * config/tc-mips.c (mips_fix_adjustable): If the full addend is
3115 going to be split into more than one in-place addend, return 0
3116 for relocations against mergeable sections. Associate comments
3119 2004-07-07 Tomer Levi <Tomer.Levi@nsc.com>
3121 * Makefile.am (CPU_TYPES): Add crx.
3122 (TARGET_CPU_CFILES): Add config/tc-crx.c.
3123 (TARGET_CPU_HFILES): Add config/tc-crx.h.
3124 (DEPTC_crx_elf): New target.
3125 (DEPOBJ_crx_elf): Likewise.
3126 (DEP_crx_elf): Likewise.
3127 * Makefile.in: Regenerate.
3128 * configure.in: Add crx* target.
3129 * configure: Regenerate.
3130 * config/tc-crx.c: New file.
3131 * config/tc-crx.h: New file.
3132 * NEWS: Mention new target.
3134 2004-07-06 Nick Clifton <nickc@redhat.com>
3136 * config.in: Undefine TARGET_SYMBIAN by default.
3138 * configure: Regenerate. Add sh-symbian-elf target. If
3139 selected define TARGET_SYMBIAN.
3140 * config/tc-sh.h (TARGET_FORMAT): Select a Symbian target
3141 format if TARGET_SYMBIAN has been defined.
3143 * output-file.c (output_file_create): Report the target format
3144 chosen when bfd_openw reports that it is invalid.
3146 * config/obj-coff.c (coff_pseudo_table): Only define the weak
3147 pseudo for BFD based assemblers.
3149 2004-07-05 Andrew Stubbs <andrew.stubbs@superh.com>
3152 * config/tc-sh.c (md_assemble): Change isspace to ISSPACE.
3153 (md_parse_option): Remove redundant -isa testing.
3154 Make bfd_arch variable const.
3155 (md_show_usage): Make bfd_arch variable const.
3157 2004-07-03 James E Wilson <wilson@specifixinc.com>
3159 * config/tc-ia64.c (emit_one_bundle): Check and set insn_addr.
3160 * config/tc-ia64.h (md_frag_check): Define.
3162 2004-07-03 Aaron W. LaFramboise <aaron98wiridge9@aaronwl.com>
3164 * config/obj-coff.c (obj_coff_weak): New .weak syntax for PE weak
3166 * doc/as.texinfo (Weak): Document PE weak symbols.
3168 2004-07-03 Richard Sandiford <rsandifo@redhat.com>
3170 * config/tc-mips.c (HAVE_IN_PLACE_ADDENDS): New macro.
3171 (reloc_needs_lo_p): Only return true if HAVE_IN_PLACE_ADDENDS.
3172 (mips_frob_file): Rework so that only a single pass through the
3173 relocs is needed. Allow %lo()s to have higher offsets than their
3174 corresponding %hi()s or %got()s.
3176 2004-07-02 Nick Clifton <nickc@redhat.com>
3178 * config/tc-arm.c (md_apply_fix3:BFD_RELOC_ARM_IMMEDIATE): Do not
3179 allow values which have come from undefined symbols.
3180 Always consider this fixup to have been processed as a reloc
3181 cannot be generated for it.
3183 2004-07-02 Alan Modra <amodra@bigpond.net.au>
3185 * frags.h (struct frag): Add has_code and insn_addr fields.
3186 * write.c (cvt_frag_to_fill): Invoke md_frag_check.
3187 * config/tc-ppc.c (md_assemble): Check and set insn_addr.
3188 * config/tc-ppc.h (md_frag_check): Define.
3190 2004-06-28 Maciej W. Rozycki <macro@linux-mips.org>
3192 * doc/Makefile.am (info): Rename goal to...
3193 (info-local): ... this, to preserve implicit dependencies.
3194 * doc/Makefile.in: Regenerate with automake 1.8.5.
3196 2004-06-25 Kazuhiro Inaoka <inaoka.kazuhiro@renesas.com>
3198 * config/tc-m32r.c (md_convert_frag): Changed for @PLT.
3199 (m32r_cgen_record_fixup_exp): Changed for @GOTOFF, @GOT.
3200 (m32r_fix_adjustable): Changed for @GOTOFF, @GOT, @PLT.
3201 (tc_gen_reloc): Likewise.
3202 (m32r_end_of_match): Add for @GOTOFF, @GOT, @PLT.
3203 (m32r_parse_name): Likewise.
3204 (m32r_cgen_parse_fix_exp): Likewise.
3205 * config/tc-m32r.h (md_parse_name): Define for @GOTOFF, @GOT, @PLT.
3206 (O_PIC_reloc): Likewise.
3207 (TC_CGEN_PARSE_FIX_EXP): Likewise..
3208 * cgen.c (gas_cgen_parse_operand): Add TC_CGEN_PARSE_FIX_EXP
3209 for @GOTOFF, @GOT, @PLT.
3211 2004-06-21 Jan Beulich <jbeulich@novell.com>
3213 * gas/symbols.c: While discarding ordinary local absolute symbols
3214 when --strip-local-absolute is in effect, retain file symbols.
3216 2004-06-20 Andreas Schwab <schwab@suse.de>
3218 * config/tc-m68k.c (mri_chip): Replace current_chip, not augment.
3219 (md_parse_option): Likewise.
3221 2004-06-17 Jan Beulich <jbeulich@novell.com>
3223 * config/tc-i386.c: Deal with LEX_QM the same way as with LEX_AT.
3224 * config/te-netware.h: New file.
3225 * config/te-ppcnw.h: Delete: Obsolete.
3226 * configure.in: Eliminate ill NetWare targets. Make generic
3227 NetWare target use proper emulation.
3228 * Makefile.am: Eliminate reference to obsolete te-ppcnw.h, add
3229 reference to new te-netware.h.
3230 * configure: Regenerate.
3231 * Makefile.in: Regenerate.
3233 2004-06-15 Martin Schwidefsky <schwidefsky@de.ibm.com>
3235 * config/tc-s390.c (s390_insn): Avoid incorrect signed/unsigned
3236 comparison in .insn pseudo operation.
3238 2004-06-15 Alan Modra <amodra@bigpond.net.au>
3240 * config/obj-coff.c (coff_adjust_section_syms): Use
3241 bfd_get_section_size instead of bfd_get_section_size_before_reloc.
3242 (coff_frob_section): Likewise.
3243 * config/tc-mips.c (md_apply_fix3): Likewise.
3244 * config/obj-elf.c (elf_frob_file): Use bfd_set_section_size.
3245 (elf_frob_file_after_relocs): Likewise.
3247 2004-06-10 John David Anglin <dave.anglin@nrc-cnrc.gc.ca>
3249 * config/tc-hppa.c (log2): Rename to exact_log2.
3250 (pa_next_subseg): Delete unused function.
3251 (create_new_space): Mark unused arguments with ATTRIBUTE_UNUSED.
3252 (create_new_subspace): Likewise.
3255 * config/tc-hppa.c (hppa_fix_adjustable): Allow reduction of fake
3256 labels. Fix warning.
3258 2004-05-28 DJ Delorie <dj@redhat.com>
3260 * config/tc-mn10300.h (tc_fix_adjustable): Define.
3261 * config/tc-mn10300.c (mn10300_fix_adjustable): Don't adjust debug
3262 or non-merged symbols.
3264 2004-05-28 H.J. Lu <hongjiu.lu@intel.com>
3266 * config/tc-ia64.c (remove_marked_resource): Save, clear and
3267 restore the old slot when inserting srlz.i/srlz.d.
3269 2004-05-28 Andrew Stubbs <andrew.stubbs@superh.com>
3271 * Makefile.am: Regenerate dependecies.
3272 * Makefile.in: Regenerate.
3273 * config/tc-sh.c (valid_arch): Make unsigned.
3274 (preset_target_arch): Likewise.
3275 (md_begin): Use new architecture flags system.
3276 (get_specific): Likewise.
3277 (assemble_ppi): Likewise.
3278 (md_assemble): Likewise. Also fix error check for bad opcodes.
3279 (md_parse_option): Likewise. Also generate -isa values according
3280 to the table in bfd/cpu-sh.c instead of just constants. Also
3281 allow <arch>-up ISA variants.
3282 (sh_elf_final_processing): Replace if-else chain with a call to
3283 sh_find_elf_flags().
3284 * testsuite/gas/sh/arch: New directory.
3285 * testsuite/gas/sh/arch/arch.exp: New test script.
3286 * testsuite/gas/sh/arch/arch_expected.txt: New file.
3287 * testsuite/gas/sh/arch/sh.s: New file.
3288 * testsuite/gas/sh/arch/sh2.s: New file.
3289 * testsuite/gas/sh/arch/sh-dsp.s: New file.
3290 * testsuite/gas/sh/arch/sh2e.s: New file.
3291 * testsuite/gas/sh/arch/sh3-nommu.s: New file.
3292 * testsuite/gas/sh/arch/sh3.s: New file.
3293 * testsuite/gas/sh/arch/sh3-dsp.s: New file.
3294 * testsuite/gas/sh/arch/sh3e.s: New file.
3295 * testsuite/gas/sh/arch/sh4-nommu-nofpu.s: New file.
3296 * testsuite/gas/sh/arch/sh4-nofpu.s: New file.
3297 * testsuite/gas/sh/arch/sh4.s: New file.
3298 * testsuite/gas/sh/arch/sh4a-nofpu.s: New file.
3299 * testsuite/gas/sh/arch/sh4al-dsp.s: New file.
3300 * testsuite/gas/sh/arch/sh4a.s: New file.
3302 2004-05-28 Peter Barada <peter@the-baradas.com>
3304 * config/gc-m68k.c(m68k_ip): Convert mode 5 addressing
3305 with zero offset into mode 2 addressing to save a word.
3307 2004-05-27 H.J. Lu <hongjiu.lu@intel.com>
3309 * config/tc-ia64.c (ar_is_in_integer_unit): Removed.
3310 (ar_is_only_in_integer_unit): New.
3311 (ar_is_only_in_memory_unit): New.
3312 (generate_unwind_image): Silence gcc on 32bit host.
3313 (md_assemble): Use ar_is_only_in_integer_unit instead of
3314 ar_is_in_integer_unit. Check AR access.
3316 2004-05-27 Peter Barada <peter@the-baradas.com>
3318 * config/tc-m68k.c (md_begin): Sort the opcode table into
3320 (m68k_compare_opcode): New function to do the sorting.
3322 2004-05-24 Peter Barada <peter@the-baradas.com>
3324 * config/m68k-parse.y(operand): Allow for MAC/EMAC mask
3325 addressing on MIT style operands.
3326 * config/m68k-parse.y(yylex): Allow '-&' for predecrement
3328 * config/tc-m68k.c(install_operand): Comment 'G' and 'H' type
3331 2004-05-23 Alan Modra <amodra@bigpond.net.au>
3333 * expr.c (operand, operator): Don't reject '++' and '--'.
3335 2004-05-20 Richard Sandiford <rsandifo@redhat.com>
3337 * config/tc-mips.c (append_insn): Use ISA-encoded addresses in MIPS16
3340 2004-05-17 Adam Nemet <anemet@lnxw.com>
3342 * configure.in: Add ppc-*-lynxos*. Update i386-*-lynxos* to ELF.
3343 * configure: Regenerate.
3345 2004-05-13 Paul Brook <paul@codesourcery.com>
3347 * dw2gencfi.c (output_cie): Handle dwarf3 format CIE entries.
3349 2004-05-13 Joel Sherrill <joel@oarcorp.com>
3351 * configure.in (or32-*-rtems*): Switch to elf.
3352 * configure: Regenerate.
3354 2004-05-13 Nick Clifton <nickc@redhat.com>
3356 * po/fr.po: Updated French translation.
3358 2004-05-11 Nick Clifton <nickc@redhat.com>
3360 * doc/as.texinfo (Section): Document G and T flags to .section
3361 directive. Document the extra arguments that the G flag
3362 requires. Document the #tls flag.
3364 2004-05-11 H.J. Lu <hongjiu.lu@intel.com>
3366 * subsegs.c (section_symbol): Create a new section symbol if
3367 the existing one doesn't match.
3368 * symbols.c (symbol_set_bfdsym): Don't reset BFD section symbol.
3370 2004-05-07 Richard Sandiford <rsandifo@redhat.com>
3372 * config/tc-mips.c (append_insn, mips_emit_delays): Extend -mfix-vr4120
3373 to cope with VR4181A errata MD(1) and MD(4).
3375 2004-05-07 Brian Ford <ford@vss.fsi.com>
3377 * NEWS: Mention .secrel32 for pe[i]-i386.
3379 2004-05-07 Alexandre Oliva <aoliva@redhat.com>
3381 * config/tc-frv.h (MAX_MEM_FOR_RS_ALIGN_CODE): New.
3382 (HANDLE_ALIGN): New.
3384 2004-05-06 Daniel Jacobowitz <dan@debian.org>
3386 * Makefile.am (DIST_SUBDIRS): Define.
3387 * aclocal.m4: Regenerate with automake 1.8.4.
3388 * Makefile.in: Likewise.
3389 * doc/Makefile.in: Likewise.
3391 2004-05-06 David Mosberger-Tang <davidm@hpl.hp.com>
3393 * config/tc-ia64.c (dot_serialize): Declare.
3394 (dot_serialize): New function.
3395 (md_pseudo_table): Add ".serialize.data" and
3396 ".serialize.instruction" directives.
3398 2004-05-06 Nick Clifton <nickc@redhat.com>
3400 * messages (as_internal_value_out_of_range): Print a message about
3401 a value being out of range. Be consistent about whether the
3402 values are printed in decimal or hexadecimal.
3403 (as_warn_value_out_of_range): Generate a warning message about an
3405 (as_bad_value_out_of_range): Generate an error message about an
3407 * as.h: Prototype the new functions.
3408 * config/tc-alpha.c (insert_operand): Use new function.
3409 * config/tc-arc.c (arc_insert_operand): Likewise.
3410 * config/tc-mn10200.c (mn10200_insert_operand): Likewise.
3411 * config/tc-mn10300.c (mn10300_insert_operand): Likewise.
3412 * config/tc-ppc.c (ppc_insert_operand): Likewise.
3413 * config/tc-s390.c (s390_insert_operand): Likewise.
3414 * config/tc-v850.c (v850_insert_operand): Likewise.
3416 2004-05-05 Alexandre Oliva <aoliva@redhat.com>
3418 * configure.in: Set em=linux for frv-*-*linux*.
3419 * configure: Rebuilt.
3420 * config/tc-frv.h (TARGET_FORMAT): Use elf32-frvfdpic if...
3421 (frv_md_fdpic_enabled): New.
3422 * config/tc-frv.c (frv_md_fdpic_enabled): New.
3423 (DEFAULT_FDPIC): New.
3424 (frv_flags): Use DEFAULT_FDPIC.
3425 (frv_pic_flag): Likewise.
3426 (OPTION_NOPIC): New.
3427 (md_longopts): Add -mnopic.
3428 (md_parse_option): Handle it.
3429 (md_show_usage): Add -mfdpic and -mnopic.
3431 2004-05-05 Peter Barada <peter@the-baradas.com>
3433 * config/tc-m68k.c: Add find_cf_chip to print list of valid
3434 chips for invalid coldfire instructions, rename selectors
3435 for ColdFire sub-variants, add 521x,5249,547x,548x and aliases,
3436 add current_chip to track which chip is referred to(including save/restore),
3437 use current_chip to select control registers, not current_arch.
3438 (md_show_usage): Add new chips.
3439 * doc/c-m68k.texi: Document new command line switches.
3441 2004-05-05 Jakub Jelinek <jakub@redhat.com>
3443 * tc-s390.h (md_do_align, HANDLE_ALIGN): Remove.
3444 (NOP_OPCODE): Define.
3445 (s390_align_code): Remove prototype.
3446 * tc-s390.c (s390_align_code): Remove.
3448 2004-05-04 H.J. Lu <hongjiu.lu@intel.com>
3450 * config/tc-ia64.c (make_unw_section_name): Removed.
3451 (start_unwind_section): New function.
3452 (generate_unwind_image): Take const segT instead of const
3454 (dot_handlerdata): Adjusted.
3455 (dot_endp): Likewise.
3457 2004-05-02 H.J. Lu <hongjiu.lu@intel.com>
3459 * config/obj-elf.c (obj_elf_change_section): Allow the
3460 ".note.GNU-stack" section has SHF_EXECINSTR.
3462 2004-05-02 H.J. Lu <hongjiu.lu@intel.com>
3464 * config/obj-elf.c (get_section): Return bfd_boolean.
3465 (obj_elf_change_section): Call bfd_get_section_by_name_if
3466 instead of bfd_map_over_sections.
3468 2004-04-30 H.J. Lu <hongjiu.lu@intel.com>
3470 * config/obj-elf.c (get_section): New function.
3471 (obj_elf_change_section): Support multiple sections with same
3474 2004-04-30 Nick Clifton <nickc@redhat.com>
3476 * config/tc-arm.c (create_register_alias): Fix typo checking for
3477 case sensitive register aliases.
3478 (co_proc_number): Use error message string in all_reg_maps[]
3480 (cp_reg_required_here): Likewise.
3481 (fp_reg_required_here): Likewise.
3483 2004-04-29 Brian Ford <ford@vss.fsi.com>
3485 * dwarf2dbg.c (dwarf2_finish): Add SEC_DEBUGGING to section flags.
3487 2004-04-28 Chris Demetriou <cgd@broadcom.com>
3489 * config/tc-mips.c (HAVE_32BIT_ADDRESSES, append_insn, macro_build)
3490 (load_address, macro, mips_ip, md_parse_option)
3491 (mips_force_relocation, mips_validate_fix, md_apply_fix3)
3492 (s_change_sec, pic_need_relax, tc_gen_reloc): Remove all
3493 embedded-PIC handling, and update comments.
3494 (SWITCH_TABLE): Remove.
3495 * config/tc-mips.h (DIFF_EXPR_OK): Delete.
3496 (enum mips_pic_level): Remove EMBEDDED_PIC.
3497 (EXTERN_FORCE_RELOC): Remove embedded-PIC handling.
3498 (TC_FORCE_RELOCATION): Update comment.
3499 * ecoff.c (ecoff_build_lineno): Add comment about some code that
3500 might be safe to remove now that MIPS embedded-PIC is gone.
3502 2004-04-28 John David Anglin <dave.anglin@nrc-cnrc.gc.ca>
3504 * config/obj-som.c (obj_som_init_stab_section): Add new arguments in
3505 call to obj_set_subsection_attributes.
3506 (obj_som_init_stab_section): Likewise.
3507 * config/tc-hppa.c (default_subspace_dict): Add comdat field.
3508 (pa_def_subspaces): Provide comdat default.
3509 (pa_subspace): Handle new "comdat" parameter. Set SEC_LINK_ONCE and
3510 not SEC_IS_COMMON if section is comdat, common or dup_common. Update
3511 calls to create_new_subspace and update_subspace to pass comdat flag.
3512 (create_new_subspace, update_subspace): Add new comdat argument. Use
3513 it in calls to obj_set_subsection_attributes.
3514 * doc/c-hppa.texi (.subspa, .nsubspa): Document new comdat parameter
3515 and use of comdat, common and dup_comm parameters.
3517 2004-04-26 H.J. Lu <hongjiu.lu@intel.com>
3519 * config/obj-elf.c (obj_elf_change_section): Check if the old
3520 group name is NULL before comparison.
3522 2004-04-23 Chris Demetriou <cgd@broadcom.com>
3524 * config/tc-mips.h (mips_dwarf2_addr_size): Prototype.
3526 2004-04-23 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
3528 * config/tc-mips.c (s_mipsset): Set default CPU type for .set mipsN.
3530 2004-04-23 Chris Demetriou <cgd@broadcom.com>
3532 * config/tc-mips.c (md_longopts): Remove -membedded-pic option.
3533 (OPTION_MEMBEDDED_PIC): Remove.
3534 (OPTION_TRAP, OPTION_BREAK, OPTION_EB, OPTION_EL)
3535 (OPTION_FP32, OPTION_GP32, OPTION_CONSTRUCT_FLOATS)
3536 (OPTION_NO_CONSTRUCT_FLOATS, OPTIONS_FP64, OPTION_GP64)
3537 (OPTION_RELAX_BRANCH, OPTION_NO_RELAX_BRANCH)
3538 (OPTION_ELF_BASE): Renumber.
3539 (md_parse_option): Remove OPTION_MEMBEDDED_PIC handling.
3540 (md_show_usage): Remove mention of -membedded-pic.
3541 * doc/as.texinfo: Remove mention of -membedded-pic.
3543 2004-04-23 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
3545 * config/tc-mips.h (USE_GLOBAL_POINTER_OPT): Remove.
3546 * config/tc-mips.c (RDATA_SECTION_NAME, mips_target_format): Remove
3548 (md_begin, mips_ip, md_parse_option, s_change_sec, s_option,
3549 s_abicalls, nopic_need_relax, tc_gen_reloc): Remove uses of
3550 USE_GLOBAL_POINTER_OPT.
3552 2004-04-22 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
3554 * config/tc-mips.c (macro): One more use of load_delay_nop.
3556 2004-04-22 Atsushi Nemoto <anemo@mba.ocn.ne.jp>
3558 * config/tc-mips.c (load_delay_nop): New function.
3559 (load_address, macro): Use load_delay_nop() to build a nop
3560 which can be omitted with gpr_interlocks.
3562 2004-04-22 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
3564 * config/tc-mips.c (hilo_interlocks, gpr_interlocks,
3565 cop_interlocks): Remove superfluous CPU entries.
3567 2004-04-22 Paul Brook <paul@codesourcery.com>
3569 * config/tc-arm.c (mav_parse_offset): Value must be multiple of 4.
3571 2004-04-22 Peter Barada <peter@the-baradas.com>
3573 * NEWS: Added support for EMAC instructions and MAC/EMAC
3575 * config/m68k-parse.h: Add ACC[123], ACCEXT{01,23}, MAC/EMAC
3576 scale factor tokens, trailing_ampersand to mark mask addressing
3577 for MAC/EMAC instructions.
3578 * config/m68k-parse.y: Add options_ampersand clause, '<<',
3580 (yylex): Handle '>', '<', and '&' following '+'.
3581 * config/tc-m68k.c: Set mcfmac/mcfemac on appropriate ColdFire
3582 architectures in archs[].
3583 (m68k-ip): Add '4', 'e', 'g', 'i', cases to handle mask addressing
3584 for MAC/EMAC instructions, ACC[0123], ACCEXT{01,23}, and '<<'/'>>'
3586 (m68k_ip): Handle trailing '&' on MAC/EMAC insns.
3587 (install_operand): Fix 'n' case, Add 'F', 'f', 'G', 'H', 'I', ']'
3589 Add EMAC operands to init_table[].
3591 2004-04-22 Bruno De Bus <bdebus@elis.ugent.be>
3593 * config/tc-arm.h (enum mstate): Move here, add MAP_UNDEFINED
3595 (TC_SEGMENT_INFO_TYPE): Define to enum mstate.
3596 * config/tc-arm.c (enum mstate): Delete from here.
3597 (mapping_state): Remove the static mapstate variable and instead
3598 store the state in the segment. This allows a per-section mapping
3599 state. Handle and ignore MAP_UNDEFINED states.
3600 (arm_elf_change_section): Get the current mapping state from the
3602 (s_ltorg): Set the mapping state to MAP_DATA.
3603 (arm_cleanup): Use arm_elf_change_section to get the mapping state
3604 for each pool as it is emitted.
3606 2004-04-22 Nick Clifton <nickc@redhat.com>
3608 * config/tc-arm.h: Formatting tidy ups.
3610 2004-04-20 Chris Demetriou <cgd@broadcom.com>
3612 * NEWS: Note that MIPS -membedded-pic option is deprecated.
3614 2004-04-20 DJ Delorie <dj@redhat.com>
3616 * config/tc-i386.h [TE_PE] (TC_CONS_FIX_NEW): Define.
3617 * config/tc-i386.c (md_pseudo_table) [TE_PE]: Add "secrel32".
3618 [TE_PE] (O_secrel): Define.
3619 [TE_PE] (x86_pe_cons_fix_new): New.
3620 [TE_PE] (pe_directive_secrel): Likewise.
3621 (tc_gen_reloc) [TE_PE]: Support BFD_RELOC_32_SECREL.
3623 2004-04-19 Eric Christopher <echristo@redhat.com>
3625 * config/tc-mips.c (mips_dwarf2_addr_size): Revert part
3626 of previous patch for fix in gcc.
3628 2004-04-19 Jakub Jelinek <jakub@redhat.com>
3630 * config/tc-xtensa.c (xg_assembler_literal): Fix a typo.
3632 2004-04-19 Nathan Sidwell <nathan@codesourcery.com>
3634 * read.c (do_align): Call md_flush_pending_output, if defined.
3636 2004-04-16 Alan Modra <amodra@bigpond.net.au>
3638 * expr.c (operand): Correct checks for ++ and --.
3640 2004-04-14 H.J. Lu <hongjiu.lu@intel.com>
3642 * config/tc-generic.c: Add some comments.
3644 2004-04-14 Richard Sandiford <rsandifo@redhat.com>
3646 * doc/c-mips.texi (-m{no-,}fix-vr4120): Renamed from
3647 -{no-}mfix-vr4122-bugs.
3648 * config/tc-mips.c (mips_fix_vr4120): Renamed from mips_fix_4122_bugs.
3649 (append_insn, mips_emit_delays): Update accordingly.
3650 (OPTION_FIX_VR4120, OPTION_NO_FIX_VR4120): Renamed from *VR4122.
3651 (md_longopts): Change -{no-,}mfix-vr4122-bugs to -m{no-,}fix-vr4120.
3652 (md_parse_option): Update after above changes.
3653 (md_show_usage): Add -mfix-vr4120.
3655 2004-04-13 Bob Wilson <bob.wilson@acm.org>
3657 * doc/as.texinfo (Sub-Sections): Conditionalize COFF-specific use
3658 of .section directive; add a reference to the ELF .subsection
3661 2004-04-13 Kazuhiro Inaoka <inaoka.kazuhiro@renesas.com>
3663 * config/tc-m32r.c (md_assemble): Fixed infinite loop bug
3666 2004-04-11 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
3668 * Makefile.am: Remove mips from aout targets.
3669 * Makefile.in: Regenerate.
3670 * configure.in: Remove mips-dec-bsd* target.
3671 * configure: Regenerate.
3673 2004-04-07 Alan Modra <amodra@bigpond.net.au>
3676 * config/tc-ppc.c (ppc_elf_suffix): Add valid32 and valid64 fields
3677 to struct map_bfd. Adjust MAP macro, and define MAP32, MAP64.
3678 Update "mapping". Restrict some @ modifiers to 32 bit.
3680 2004-04-01 Asgari Jinia <asgarij@kpitcummins.com>
3681 Dhananjay Deshpande <dhananjayd@kpitcummins.com>
3683 * config/tc-sh.c (dont_adjust_reloc_32): New variable.
3684 (sh_fix_adjustable): Avoid adjusting BFD_RELOC_32 when
3685 dont_adjust_reloc_32 is set.
3686 (md_longopts): Add option -renesas.
3687 (md_parse_option, md_show_usage): Likewise.
3688 * doc/c-sh.texi: Likewise.
3690 2004-04-01 Dave Korn <dk@artimi.com>
3692 * config/tc-dlx.c (md_assemble): set fx_no_overflow flag for
3693 hi16 and lo16 fixS structs.
3694 (md_assemble): generate bit_fixS for RELOC_DLX_LO16 in
3695 exactly the same way as for RELOC_DLX_REL16.
3696 (machine_ip): properly respect LO flag in the_insn and
3697 output RELOC_DLX_LO16 rather than RELOC_DLX_16.
3698 (md_apply_fix3): apply RELOC_DLX_LO16.
3700 2004-03-30 Stan Shebs <shebs@apple.com>
3702 Remove long-obsolete MPW support.
3703 * mpw-config.in, mpw-make.sed, mac-as.r: Remove files.
3704 * configure.in: Remove mention of ppc-*-mpw* config.
3705 * configure.in: Likewise.
3707 2004-03-30 Nick Clifton <nickc@redhat.com>
3709 * config/tc-arm.c (meabi_flags): Make its use conditional upon
3710 OBJ_ELF being defined.
3712 2004-03-27 Alan Modra <amodra@bigpond.net.au>
3714 * config/obj-aout.c (obj_aout_type): Remove #ifdef BFD_ASSEMBLER code.
3716 2004-03-23 Paul Brook <paul@codesourcery.com>
3718 * config/tc-arm.c (meabi_flags): New variable.
3719 (arm_parse_eabi): New function.
3720 (md_begin): Set flags for EABI v3.
3722 (arm_long_opts): Add meabi.
3723 * doc/as.texinfo <ARM>: Document -meabi.
3724 * doc/c-arm.texi: Ditto.
3726 2004-03-22 Bob Wilson <bob.wilson@acm.org>
3728 * config/tc-xtensa.c (xtensa_post_relax_hook): Create literal
3729 tables even when use_literal_section flag is not set.
3731 2004-03-22 Alan Modra <amodra@bigpond.net.au>
3733 * config/tc-sh.c: Remove trailing whitespace.
3735 2004-03-22 Hans-Peter Nilsson <hp@axis.com>
3737 * doc/c-cris.texi (CRIS-Opts): Document --no-mul-bug-abort,
3738 --mul-bug-abort and the default behavior.
3739 * config/tc-cris.c (cris_insn_kind): New member CRIS_INSN_MUL.
3740 (err_for_dangerous_mul_placement): New variable.
3741 (STATE_MUL, OPTION_MULBUG_ABORT_ON, OPTION_MULBUG_ABORT_OFF): New
3743 (md_cris_relax_table): Have placeholder for STATE_MUL.
3744 (md_longopts): New options --mul-bug-abort and --no-mul-bug-abort.
3745 (cris_relax_frag) <case ENCODE_RELAX (STATE_MUL, STATE_BYTE)>: New
3747 (md_estimate_size_before_relax) <case ENCODE_RELAX (STATE_MUL,
3748 STATE_BYTE)>: Ditto.
3749 (md_convert_frag) <ENCODE_RELAX (STATE_MUL, STATE_BYTE)>: Check
3750 alignment and position of this frag, emit error message if
3752 (md_assemble): For a multiply insn and when checking it,
3753 transform the current frag into a special frag for that purpose.
3754 (md_parse_option) <case OPTION_MULBUG_ABORT_OFF, case
3755 OPTION_MULBUG_ABORT_ON>: Handle new options.
3757 2004-03-19 Bob Wilson <bob.wilson@acm.org>
3759 * config/tc-xtensa.c (mark_literal_frags): New function.
3760 (xtensa_move_literals): Call mark_literal_frags for all literal
3761 segments, including init and fini literal segments.
3762 (xtensa_post_relax_hook): Swap use of xt_insn_sec and xt_literal_sec.
3764 2004-03-19 John David Anglin <dave.anglin@nrc-cnrc.gc.ca>
3766 * tc-hppa.c (cons_fix_new_hppa): Check for PC relative base type.
3767 (pa_comm): Set BSF_OBJECT in symbol flags.
3769 2004-03-19 Alan Modra <amodra@bigpond.net.au>
3771 * Makefile.am: Run "make dep-am".
3772 * Makefile.in: Regenerate.
3773 * doc/Makefile.in: Regenerate.
3774 * config.in: Regenerate.
3775 * po/gas.pot: Regenerate.
3777 2004-03-18 Nathan Sidwell <nathan@codesourcery.com>
3779 * read.c (read_a_source_file): Use demand_empty_rest_of_line.
3780 (demand_empty_rest_of_line): Issue an error here.
3781 (ignore_rest_of_line): Silently skip to end.
3782 (demand_copy_string): Issue an error, not warning.
3784 * config/obj-elf.c (obj_elf_section_name): Likewise.
3785 (obj_elf_section): Likewise.
3786 * config/tc-arc.c (arc_extoper): Remove bogus NULL checks.
3787 (arc_extinst): Likewise.
3788 * config/tc-ia64.c (dot_saveb): Use demand_empty_rest_of_line.
3789 (dot_spill): Likewise.
3790 (dot_unwabi): Likewise.
3791 (dot_prologue): Likewise.
3793 * expr.c (operand): Reject ++ and --.
3794 (operator): Likewise.
3796 2004-03-17 Kaz Kojima <kkojima@rr.iij4u.or.jp>
3798 * config/tc-sh.c: Include dw2gencfi.h.
3799 (sh_cfi_frame_initial_instructions): New function.
3800 (sh_regname_to_dw2regnum): Likewise.
3801 * config/tc-sh.h (DWARF2_LINE_MIN_INSN_LENGTH): Move to the end of
3803 (TARGET_USE_CFIPOP): Define.
3804 (tc_cfi_frame_initial_instructions): Likewise.
3805 (tc_regname_to_dw2regnum): Likewise.
3806 (DWARF2_DEFAULT_RETURN_COLUMN, DWARF2_CIE_DATA_ALIGNMENT): Likewise.
3807 * Makefile.am: Update dependencies.
3808 * Makefile.in: Regenerate.
3810 2004-03-17 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
3812 * configure.in: Switch sh-*-rtems* to ELF. Add sh-*-rtemscoff*.
3813 * configure: Regenerate.
3815 2004-03-12 Bob Wilson <bob.wilson@acm.org>
3817 * read.c (s_leb128): Call md_flush_pending_output.
3819 2004-03-12 Michal Ludvig <mludvig@suse.cz>
3821 * config/tc-i386.c (output_insn): Handle PadLock instructions.
3822 * config/tc-i386.h (CpuPadLock): New define.
3823 (CpuUnknownFlags): Added CpuPadLock.
3825 2004-03-07 Andreas Schwab <schwab@suse.de>
3827 * doc/c-hppa.texi (HPPA Directives): Fix typo.
3829 2004-03-07 Richard Henderson <rth@redhat.com>
3831 * dw2gencfi.c (output_cie): Align length to 4 byte boundary.
3832 (cfi_finish): Likewise for fde.
3834 2004-03-05 H.J. Lu <hongjiu.lu@intel.com>
3836 * config/tc-ia64.c (md_assemble): Properly handle NULL
3838 (ia64_handle_align): Don't abort if failed to add a stop bit.
3840 2004-03-04 H.J. Lu <hongjiu.lu@intel.com>
3842 * Makefile.in: Regenerated.
3843 * aclocal.m4: Likewise.
3844 * configure: Likewise.
3845 * doc/Makefile.in: Likewise.
3847 2004-03-03 H.J. Lu <hongjiu.lu@intel.com>
3849 * config/tc-ia64.c (dot_align): New.
3850 (ia64_do_align): Make it static.
3851 (md_pseudo_table): Use "dot_align" for "align".
3852 (ia64_md_do_align): Don't set align_frag here.
3853 (ia64_handle_align): Add a stop bit to the previous bundle if
3856 * config/tc-ia64.h (ia64_do_align): Removed.
3858 2003-03-03 Andrew Stubbs <andrew.stubbs@superh.com>
3860 * config/tc-sh.c (md_parse_option): Add -isa=sh4-nofpu and
3861 -isa=sh4-nommu-nofpu options. Adjust help messages accordingly.
3862 (sh_elf_final_processing): Output BFD type sh4_nofpu if that is
3863 the most general type or the user specifically requested it.
3864 (md_assemble): Add a new error message for when an instruction
3865 is understood, but is not allowed due to an -isa option.
3867 2004-03-02 H.J. Lu <hongjiu.lu@intel.com>
3869 * config/tc-ia64.c (align_frag): New.
3870 (md_assemble): Set the tc_frag_data field in align_frag for
3871 IA64_OPCODE_FIRST instructions.
3872 (ia64_md_do_align): Set align_frag.
3873 (ia64_handle_align): Add a stop bit if needed.
3875 * config/tc-ia64.h (TC_FRAG_TYPE): New.
3876 (TC_FRAG_INIT): New.
3878 2004-03-01 Richard Sandiford <rsandifo@redhat.com>
3880 * config/tc-frv.c (fr400_audio): New variable.
3881 (md_parse_option, md_show_usage): Add -mcpu=fr405 and -mcpu=fr450.
3882 (md_parse_option): Set fr400_audio for -mcpu=fr400 and -mcpu=fr405.
3883 (target_implements_insn_p): New function.
3884 (md_assemble): Report an error if the processor doesn't implement
3887 2004-02-27 Kazuhiro Inaoka <inaoka.kazuhiro@renesas.com>
3889 * config/tc-m32r.c (md_longopts): Added -no-bitinst option.
3890 (md_parse_option): Ditto.
3891 (OPTION_NO_SPECIAL_M32R): Added.
3892 (md_show_usage): Document it.
3893 (enable_speial_m32r): Changed a default value from 0 to 1.
3894 * doc/c-m32r.texi: Document the -no-bitinst option.
3896 2004-02-27 Nick Clifton <nickc@redhat.com>
3898 * config/tc-sh.c (get_operand): Revert previous delta.
3899 (tc_gen_reloc): Check for an unknown reloc type before processing
3902 2004-02-27 Hannes Reinecke <hare@suse.de>
3904 * config/tc-s390.c (s390_insn): Correct range check for opcode in
3905 .insn pseudo operation.
3907 2004-02-27 Anil Paranjpe <anilp1@kpitcummins.com>
3909 * config/tc-sh.c (get_operand): In case of #Imm, check has been
3910 added for wrong syntax.
3912 2004-02-26 Eric Christopher <echristo@redhat.com>
3914 * config/tc-mips.c (mips_dwarf2_addr_size): New.
3915 * config/tc-mips.h (DWARF2_ADDR_SIZE): Use.
3917 2004-02-26 Andrew Stubbs <andrew.stubbs@superh.com>
3919 * config/tc-sh.c (build_Mytes): Add REG_N_D and REG_N_B01
3920 nibble types to assembler.
3922 2004-02-25 Fred Fish <fnf@redhat.com>
3924 * config/tc-iq2000.c: Add missing \n\ in multiline string literal.
3926 2004-02-20 James E Wilson <wilson@specifixinc.com>
3928 * config/tc-ia64.c (slot_index): New arg before_relax. Use instead of
3930 (fixup_unw_records): New arg before_relax. Pass to slot_index.
3931 (ia64_estimate_size_before_relax): New.
3932 (ia64_convert_frag): Pass 0 to fixup_unw_records. Add comment.
3933 (generate_unwind_image): Pass 1 to fixup_unw_records.
3934 * config/tc-ia64.h (ia64_estimate_size_before_relax): Declare.
3935 (md_estimate_size_before_relax): Call ia64_estimate_size_before_relax.
3937 2004-02-19 Jakub Jelinek <jakub@redhat.com>
3939 * stabs.c (generate_asm_file): Avoid warning about use of
3940 uninitialized variable.
3942 2004-02-18 David Mosberger <davidm@hpl.hp.com>
3944 * config/tc-ia64.c (ia64_flush_insns): In addition to prologue,
3945 body, and endp, allow unwind records which do not have a "t"
3946 (time/instruction) field.
3948 2004-02-17 Petko Manolov <petkan@nucleusys.com>
3950 * config/tc-arm.c (do_mav_dspsc_1): Correct offset of CRn.
3951 (do_mav_dspsc_2): Likewise.
3952 Fix accumulator registers move opcodes.
3954 2004-02-13 Hannes Reinecke <hare@suse.de>
3955 Jakub Jelinek <jakub@redhat.com>
3957 * dwarf2dbg.c (get_filenum): Do not read beyond allocated memory.
3959 2004-02-10 Steve Ellcey <sje@cup.hp.com>
3961 * config/tc-ia64.h (ia64_frob_symbol): New declaration.
3962 (tc_frob_symbol): New macro definition.
3963 * config/tc-ia64.c (ia64_frob_symbol): New routine.
3965 2004-02-09 Daniel Jacobowitz <drow@mvista.com>
3967 * config/tc-arm.c (md_begin): Mark .note.gnu.arm.ident as
3970 2004-02-09 Nathan Sidwell <nathan@codesourcery.com>
3972 * read.h (IGNORE_OPCODE_CASE): Do not define. Replace with ...
3973 (TC_CASE_SENSITIVE): ... this.
3974 * read.c: Replace IGNORE_OPCODE_CASE with TC_CASE_SENSITIVE.
3975 * doc/internals.texi (TC_CASE_SENSITIVE): Document.
3977 2004-02-06 James E Wilson <wilson@specifixinc.com>
3979 * config/tc-ia64.c (dot_endp): Delete call to output_endp.
3980 (generate_unwind_image): Re-add it here.
3982 2004-02-06 Nathan Sidwell <nathan@codesourcery.com>
3984 * dwarf2dbg.c (DWARF2_ADDR_SIZE): Remove trailing ';'
3985 * read.h (SKIP_WHITESPACE): Turn into an expression.
3986 * read.c (read_a_source_file): A pseudo is removed by having a
3989 2004-02-05 James E Wilson <wilson@specifixinc.com>
3991 * config/tc-ia64.c (output_endp): New.
3992 (count_bits): Delete.
3993 (ia64_flush_insns, process_one_record, optimize_unw_records): Handle
3994 endp unwind records.
3995 (fixup_unw_records): Handle endp unwind records. Delete code for
3996 shortening prologue regions not followed by a body record.
3997 (dot_endp): Call add_unwind_entry to emit endp unwind record.
3998 * config/tc-ia64.h (unw_record_type): Add endp.
4000 2004-02-03 James E Wilson <wilson@specifixinc.com>
4002 * config/tc-ia64.c (ia64_convert_frag): Call md_number_to_chars to
4003 fill padding bytes with zeroes.
4004 (emit_one_bundle): New locals last_ptr, end_ptr. Rewrite code that
4005 sets unwind_record slot_number and slot_frag fields.
4007 2004-02-02 Maciej W. Rozycki <macro@ds2.pg.gda.pl>
4009 * config/tc-mips.c (add_got_offset_hilo): New function.
4010 (macro): Use load_register() and add_got_offset_hilo() to load
4011 constants instead of hardcoding code sequences throughout.
4013 2004-01-28 H.J. Lu <hongjiu.lu@intel.com>
4015 * config/tc-ia64.c (emit_one_bundle): Add proper indentation.
4017 2004-01-26 Bernardo Innocenti <bernie@develer.com>
4019 * config/tc-m68k.h (EXTERN_FORCE_RELOC): Handle m68k-uclinux specially,
4021 * config/tc-m68k.c (RELAXABLE_SYMBOL): Use EXTERN_FORCE_RELOC instead
4022 of hard-coded test for TARGET_OS=elf.
4024 2004-01-24 Chris Demetriou <cgd@broadcom.com>
4026 * config/tc-mips.c (hilo_interlocks): Change definition
4027 so that MIPS32, MIPS64 and later ISAs are included, along with
4028 the already-included machines. Update comments.
4030 2004-01-23 Daniel Jacobowitz <drow@mvista.com>
4032 * config/tc-arm.c (tc_gen_reloc): Improve error message for
4033 undefined local labels.
4035 2004-01-23 Richard Sandiford <rsandifo@redhat.com>
4037 * config/tc-mips.c (load_address, macro): Update comments about
4038 NewABI GP relaxation.
4040 2004-01-23 Richard Sandiford <rsandifo@redhat.com>
4042 * config/tc-mips.c (macro_build): Remove place and counter arguments.
4043 (mips_build_lui, macro_build_ldst_constoffset): Likewise.
4044 (mips16_macro_build, macro_build_jalr): Remove counter argument.
4045 (set_at, load_register, load_address, move_register): Likewise.
4046 (load_got_offset, add_got_offset): Likewise.
4047 Update all calls and tidy accordingly.
4049 2004-01-23 Richard Sandiford <rsandifo@redhat.com>
4051 * config/tc-mips.c (RELAX_ENCODE): Remove WARN argument.
4052 (RELAX_FIRST, RELAX_SECOND): Turn into 8-bit quantities.
4053 (RELAX_USE_SECOND): Bump to 0x10000.
4054 (RELAX_SECOND_LONGER, RELAX_NOMACRO, RELAX_DELAY_SLOT): New flags.
4055 (mips_macro_warning): New variable.
4056 (md_assemble): Wrap macro expansion in macro_start() and macro_end().
4057 (s_cpload, s_cpsetup, s_cprestore, s_cpreturn): Likewise.
4058 (relax_close_frag): Set mips_macro_warning.first_frag. Adjust use
4060 (append_insn): Update mips_macro_warning.sizes.
4061 (macro_start, macro_warning, macro_end): New functions.
4062 (macro_build): Don't emit warnings here.
4063 (macro_build_lui, md_estimate_size_before_relax): ...or here.
4064 (md_convert_frag): Check for cases where one macro alternative
4065 needs a warning and the other doesn't. Emit a warning if the
4066 longer sequence was chosen.
4068 2004-01-23 Richard Sandiford <rsandifo@redhat.com>
4070 * config/tc-mips.h (tc_frag_data_type, TC_FRAG_TYPE): Remove.
4071 * config/tc-mips.c (RELAX_ENCODE): Take three arguments: the size of
4072 the first sequence, the size of the second sequence, and a flag
4073 that says whether we should warn.
4074 (RELAX_OLD, RELAX_NEW, RELAX_RELOC[123]): Delete.
4075 (RELAX_FIRST, RELAX_SECOND): New.
4076 (mips_relax): New variable.
4077 (relax_close_frag, relax_start, relax_switch, relax_end): New fns.
4078 (append_insn): Remove "place" argument. Use mips_relax.sequence
4079 rather than "place" to check whether we're expanding the second
4080 alternative of a relaxable macro. Remove redundant check for
4081 branch relaxation. If generating a normal insn, and there
4082 is not enough room in the current frag, call relax_close_frag()
4083 to close it. Update mips_relax.sizes[]. Emit fixups for the
4084 second version of a relaxable macro. Record the first relaxable
4085 fixup in mips_relax. Remove tc_gen_reloc workaround.
4086 (macro_build): Remove all uses of "place". Use mips_relax.sequence
4087 in the same way as in append_insn.
4088 (mips16_macro_build): Remove "place" argument.
4089 (macro_build_lui): As for macro_build. Don't drop the add_symbol
4090 when generating the second version of a relaxable macro.
4091 (load_got_offset, add_got_offset): New functions.
4092 (load_address, macro): Use new relaxation machinery. Remove
4093 tc_gen_reloc workarounds.
4094 (md_estimate_size_before_relax): Set RELAX_USE_SECOND if the second
4095 version of a relaxable macro is needed. Return -RELAX_SECOND if the
4096 first version is needed.
4097 (tc_gen_reloc): Remove relaxation handling.
4098 (md_convert_frag): Go through the fixups for a relaxable macro and
4099 mark those that belong to the unneeded alternative as done. If the
4100 second alternative is needed, adjust the fixup addresses to account
4101 for the deleted first alternative.
4103 2004-01-23 Richard Sandiford <rsandifo@redhat.com>
4105 * frags.h (frag_room): Declare.
4106 * frags.c (frag_room): New function.
4107 * doc/internals.texi: Document it.
4109 2004-01-22 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
4111 * config/tc-mips.c (append_insn): Don't do r3900 interlock
4112 optimization for -mtune=r3900, as this will break on other CPUs.
4114 2004-01-11 Tom Rix <tcrix@worldnet.att.net>
4116 * config/tc-m68hc11.c (build_indexed_byte): movb and movw cannot
4117 be relaxed, use fixup.
4118 (md_apply_fix3): Use 5 bit reloc from movb and movw fixup.
4120 2004-01-19 Jakub Jelinek <jakub@redhat.com>
4122 * config/tc-sparc.c (sparc_ip): Disallow %f32-%f63 for single
4125 2004-01-14 Maciej W. Rozycki <macro@ds2.pg.gda.pl>
4127 * config/tc-mips.c (append_insn): Properly detect variant frags
4128 that preclude swapping of relaxed branches. Correctly swap
4129 instructions between frags when dealing with relaxed branches.
4131 2004-01-14 Maciej W. Rozycki <macro@ds2.pg.gda.pl>
4133 * acinclude.m4: Quote names of macros to be defined by AC_DEFUN
4135 * aclocal.m4: Regenerate.
4136 * configure: Regenerate.
4138 2004-01-12 Anil Paranjpe <anilp1@KPITCummins.com>
4140 * config/tc-h8300.c (build_bytes): Apply relaxation to bit
4143 2004-01-12 Richard Sandiford <rsandifo@redhat.com>
4145 * config/tc-mips.c (macro_build_jalr): When adding an R_MIPS_JALR
4146 reloc, reserve space for the delay slot as well as the jalr itself.
4148 2004-01-09 Paul Brook <paul@codesourcery.com>
4150 * config/tc-arm.c (do_vfp_reg2_from_sp2): Rename from do_vfp_sp_reg2.
4151 (do_vfp_sp2_from_reg2): New function.
4153 (do_vfp_dp_from_reg2): Check return values properly.
4155 2004-01-08 Ian Lance Taylor <ian@wasabisystems.com>
4157 * config/tc-mips.c (warn_nops): Remove static variable.
4158 (macro): Remove test of warn_nops.
4159 (md_shortops): Remove 'n'.
4160 (md_parse_option): Remove 'n' case.
4161 (md_show_usage): Remove -n.
4162 * doc/as.texinfo (Overview): Remove MIPS -n option.
4163 * doc/c-mips.texi (MIPS Opts): Remove mention -n.
4164 * NEWS: Mention removal of MIPS -n option.
4166 * config/tc-mips.c (ISA_HAS_COPROC_DELAYS): Remove.
4167 (cop_interlocks): Check ISA level.
4168 (cop_mem_interlocks): Define.
4169 (reg_needs_delay): Check cop_interlocks rather than
4170 ISA_HAS_COPROC_DELAYS.
4171 (append_insn): Likewise. Use cop_mem_interlocks rather than
4172 directly checking mips_opts.isa.
4173 (mips_emit_delays): Likewise.
4175 2004-01-07 H.J. Lu <hongjiu.lu@intel.com>
4177 * config/tc-ia64.c (unwind): Move next_slot_number and
4178 next_slot_frag to ...
4179 (unw_rec_list): Here.
4180 (free_list_records): Removed.
4181 (output_unw_records): Likewise.
4182 (generate_unwind_image): Make it void.
4183 (alloc_record): Initialize next_slot_number and next_slot_frag.
4184 (slot_index): Take .org, .space and .align into account.
4185 (fixup_unw_records): Don't set slot_number to 0. Use
4186 list->next_slot_number and list->next_slot_frag instead of
4187 unwind.next_slot_number and unwind.next_slot_frag.
4188 (ia64_convert_frag): New.
4189 (generate_unwind_image): Generate a rs_machine_dependent frag
4191 (emit_one_bundle): Use list->next_slot_number and
4192 list->next_slot_frag instead of unwind.next_slot_number and
4193 unwind.next_slot_frag.
4195 * config/tc-ia64.h (md_convert_frag): Defined as
4197 (md_estimate_size_before_relax): Defined as (f)->fr_var.
4199 2004-01-06 Alexandre Oliva <aoliva@redhat.com>
4201 2003-12-19 Alexandre Oliva <aoliva@redhat.com>
4202 * config/tc-frv.h (md_apply_fix3): Don't define.
4203 * config/tc-frv.c (md_apply_fix3): New. Shift/truncate %hi/%lo
4205 * config/tc-frv.h (TC_FORCE_RELOCATION_SUB_LOCAL): Define.
4206 2003-10-07 Alexandre Oliva <aoliva@redhat.com>
4207 * config/tc-frv.c (line_separator_chars): Add `!'.
4208 2003-09-19 Alexandre Oliva <aoliva@redhat.com>
4209 * config/tc-frv.c (md_assemble): Clear insn upfront.
4210 2003-09-18 Alexandre Oliva <aoliva@redhat.com>
4211 * config/tc-frv.c (OPTION_FDPIC): New macro.
4212 (md_longopts): Add mfdpic.
4213 (md_parse_option): Handle it.
4214 2003-08-04 Alexandre Oliva <aoliva@redhat.com>
4215 * config/tc-frv.c (md_cgen_lookup_reloc) <FRV_OPERAND_D12,
4216 FRV_OPERAND_S12>: Use reloc type encoded in fix-up.
4217 (frv_pic_ptr): Parse funcdesc.
4219 2004-01-05 Maciej W. Rozycki <macro@ds2.pg.gda.pl>
4221 * doc/as.texinfo: Let texi2pod parse asconfig.texi and
4222 gasver.texi. Remove duplicate symbol definitions for texi2pod.
4224 2004-01-05 Maciej W. Rozycki <macro@ds2.pg.gda.pl>
4226 * Makefile.am (Makefile): Move the dependency on
4227 $(BFDDIR)/configure.in to...
4228 (CONFIG_STATUS_DEPENDENCIES): ... here.
4229 (AUTOMAKE_OPTIONS): Require automake 1.8.
4230 * Makefile.in: Regenerate.
4231 * doc/Makefile.am (BASEDIR, BFDDIR): Define.
4232 (CONFIG_STATUS_DEPENDENCIES): Add a dependency on
4233 $(BFDDIR)/configure.in here as well.
4234 * doc/Makefile.in: Regenerate.
4236 2004-01-05 Maciej W. Rozycki <macro@ds2.pg.gda.pl>
4238 * Makefile.am (install, install-info, RECURSIVE_TARGETS): Remove.
4239 * Makefile.in: Regenerate.
4240 * aclocal.m4: Regenerate.
4241 * doc/Makefile.am (install, install-info): Remove.
4242 (install-data-local): A new hook for install-info.
4243 (AUTOMAKE_OPTIONS): Require automake 1.8.
4244 * doc/Makefile.in: Regenerate.
4246 2004-01-02 Nutan Singh <nutan@kpitcummins.com>
4248 * doc/c-sh.texi: Update description about floating point behavior
4251 2004-01-02 Bernardo Innocenti <bernie@develer.com>
4253 * configure.in: Add m68k-uClinux target.
4254 * configure: Regenerate.
4256 For older changes see ChangeLog-0203
4262 version-control: never