bfd/reloc.c

   1 /* BFD support for handling relocation entries.
   2    Copyright 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
   3    2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
   4    Free Software Foundation, Inc.
   5    Written by Cygnus Support.
   6
   7    This file is part of BFD, the Binary File Descriptor library.
   8
   9    This program is free software; you can redistribute it and/or modify
  10    it under the terms of the GNU General Public License as published by
  11    the Free Software Foundation; either version 3 of the License, or
  12    (at your option) any later version.
  13
  14    This program is distributed in the hope that it will be useful,
  15    but WITHOUT ANY WARRANTY; without even the implied warranty of
  16    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17    GNU General Public License for more details.
  18
  19    You should have received a copy of the GNU General Public License
  20    along with this program; if not, write to the Free Software
  21    Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston,
  22    MA 02110-1301, USA.  */
  23
  24 /*
  25 SECTION
  26         Relocations
  27
  28         BFD maintains relocations in much the same way it maintains
  29         symbols: they are left alone until required, then read in
  30         en-masse and translated into an internal form.  A common
  31         routine <<bfd_perform_relocation>> acts upon the
  32         canonical form to do the fixup.
  33
  34         Relocations are maintained on a per section basis,
  35         while symbols are maintained on a per BFD basis.
  36
  37         All that a back end has to do to fit the BFD interface is to create
  38         a <<struct reloc_cache_entry>> for each relocation
  39         in a particular section, and fill in the right bits of the structures.
  40
  41 @menu
  42 @* typedef arelent::
  43 @* howto manager::
  44 @end menu
  45
  46 */
  47
  48 /* DO compile in the reloc_code name table from libbfd.h.  */
  49 #define _BFD_MAKE_TABLE_bfd_reloc_code_real
  50
  51 #include "sysdep.h"
  52 #include "bfd.h"
  53 #include "bfdlink.h"
  54 #include "libbfd.h"
  55 /*
  56 DOCDD
  57 INODE
  58         typedef arelent, howto manager, Relocations, Relocations
  59
  60 SUBSECTION
  61         typedef arelent
  62
  63         This is the structure of a relocation entry:
  64
  65 CODE_FRAGMENT
  66 .
  67 .typedef enum bfd_reloc_status
  68 .{
  69 .  {* No errors detected.  *}
  70 .  bfd_reloc_ok,
  71 .
  72 .  {* The relocation was performed, but there was an overflow.  *}
  73 .  bfd_reloc_overflow,
  74 .
  75 .  {* The address to relocate was not within the section supplied.  *}
  76 .  bfd_reloc_outofrange,
  77 .
  78 .  {* Used by special functions.  *}
  79 .  bfd_reloc_continue,
  80 .
  81 .  {* Unsupported relocation size requested.  *}
  82 .  bfd_reloc_notsupported,
  83 .
  84 .  {* Unused.  *}
  85 .  bfd_reloc_other,
  86 .
  87 .  {* The symbol to relocate against was undefined.  *}
  88 .  bfd_reloc_undefined,
  89 .
  90 .  {* The relocation was performed, but may not be ok - presently
  91 .     generated only when linking i960 coff files with i960 b.out
  92 .     symbols.  If this type is returned, the error_message argument
  93 .     to bfd_perform_relocation will be set.  *}
  94 .  bfd_reloc_dangerous
  95 . }
  96 . bfd_reloc_status_type;
  97 .
  98 .
  99 .typedef struct reloc_cache_entry
 100 .{
 101 .  {* A pointer into the canonical table of pointers.  *}
 102 .  struct bfd_symbol **sym_ptr_ptr;
 103 .
 104 .  {* offset in section.  *}
 105 .  bfd_size_type address;
 106 .
 107 .  {* addend for relocation value.  *}
 108 .  bfd_vma addend;
 109 .
 110 .  {* Pointer to how to perform the required relocation.  *}
 111 .  reloc_howto_type *howto;
 112 .
 113 .}
 114 .arelent;
 115 .
 116 */
 117
 118 /*
 119 DESCRIPTION
 120
 121         Here is a description of each of the fields within an <<arelent>>:
 122
 123         o <<sym_ptr_ptr>>
 124
 125         The symbol table pointer points to a pointer to the symbol
 126         associated with the relocation request.  It is the pointer
 127         into the table returned by the back end's
 128         <<canonicalize_symtab>> action. @xref{Symbols}. The symbol is
 129         referenced through a pointer to a pointer so that tools like
 130         the linker can fix up all the symbols of the same name by
 131         modifying only one pointer. The relocation routine looks in
 132         the symbol and uses the base of the section the symbol is
 133         attached to and the value of the symbol as the initial
 134         relocation offset. If the symbol pointer is zero, then the
 135         section provided is looked up.
 136
 137         o <<address>>
 138
 139         The <<address>> field gives the offset in bytes from the base of
 140         the section data which owns the relocation record to the first
 141         byte of relocatable information. The actual data relocated
 142         will be relative to this point; for example, a relocation
 143         type which modifies the bottom two bytes of a four byte word
 144         would not touch the first byte pointed to in a big endian
 145         world.
 146
 147         o <<addend>>
 148
 149         The <<addend>> is a value provided by the back end to be added (!)
 150         to the relocation offset. Its interpretation is dependent upon
 151         the howto. For example, on the 68k the code:
 152
 153 |        char foo[];
 154 |        main()
 155 |                {
 156 |                return foo[0x12345678];
 157 |                }
 158
 159         Could be compiled into:
 160
 161 |        linkw fp,#-4
 162 |        moveb @@#12345678,d0
 163 |        extbl d0
 164 |        unlk fp
 165 |        rts
 166
 167         This could create a reloc pointing to <<foo>>, but leave the
 168         offset in the data, something like:
 169
 170 |RELOCATION RECORDS FOR [.text]:
 171 |offset   type      value
 172 |00000006 32        _foo
 173 |
 174 |00000000 4e56 fffc          ; linkw fp,#-4
 175 |00000004 1039 1234 5678     ; moveb @@#12345678,d0
 176 |0000000a 49c0               ; extbl d0
 177 |0000000c 4e5e               ; unlk fp
 178 |0000000e 4e75               ; rts
 179
 180         Using coff and an 88k, some instructions don't have enough
 181         space in them to represent the full address range, and
 182         pointers have to be loaded in two parts. So you'd get something like:
 183
 184 |        or.u     r13,r0,hi16(_foo+0x12345678)
 185 |        ld.b     r2,r13,lo16(_foo+0x12345678)
 186 |        jmp      r1
 187
 188         This should create two relocs, both pointing to <<_foo>>, and with
 189         0x12340000 in their addend field. The data would consist of:
 190
 191 |RELOCATION RECORDS FOR [.text]:
 192 |offset   type      value
 193 |00000002 HVRT16    _foo+0x12340000
 194 |00000006 LVRT16    _foo+0x12340000
 195 |
 196 |00000000 5da05678           ; or.u r13,r0,0x5678
 197 |00000004 1c4d5678           ; ld.b r2,r13,0x5678
 198 |00000008 f400c001           ; jmp r1
 199
 200         The relocation routine digs out the value from the data, adds
 201         it to the addend to get the original offset, and then adds the
 202         value of <<_foo>>. Note that all 32 bits have to be kept around
 203         somewhere, to cope with carry from bit 15 to bit 16.
 204
 205         One further example is the sparc and the a.out format. The
 206         sparc has a similar problem to the 88k, in that some
 207         instructions don't have room for an entire offset, but on the
 208         sparc the parts are created in odd sized lumps. The designers of
 209         the a.out format chose to not use the data within the section
 210         for storing part of the offset; all the offset is kept within
 211         the reloc. Anything in the data should be ignored.
 212
 213 |        save %sp,-112,%sp
 214 |        sethi %hi(_foo+0x12345678),%g2
 215 |        ldsb [%g2+%lo(_foo+0x12345678)],%i0
 216 |        ret
 217 |        restore
 218
 219         Both relocs contain a pointer to <<foo>>, and the offsets
 220         contain junk.
 221
 222 |RELOCATION RECORDS FOR [.text]:
 223 |offset   type      value
 224 |00000004 HI22      _foo+0x12345678
 225 |00000008 LO10      _foo+0x12345678
 226 |
 227 |00000000 9de3bf90     ; save %sp,-112,%sp
 228 |00000004 05000000     ; sethi %hi(_foo+0),%g2
 229 |00000008 f048a000     ; ldsb [%g2+%lo(_foo+0)],%i0
 230 |0000000c 81c7e008     ; ret
 231 |00000010 81e80000     ; restore
 232
 233         o <<howto>>
 234
 235         The <<howto>> field can be imagined as a
 236         relocation instruction. It is a pointer to a structure which
 237         contains information on what to do with all of the other
 238         information in the reloc record and data section. A back end
 239         would normally have a relocation instruction set and turn
 240         relocations into pointers to the correct structure on input -
 241         but it would be possible to create each howto field on demand.
 242
 243 */
 244
 245 /*
 246 SUBSUBSECTION
 247         <<enum complain_overflow>>
 248
 249         Indicates what sort of overflow checking should be done when
 250         performing a relocation.
 251
 252 CODE_FRAGMENT
 253 .
 254 .enum complain_overflow
 255 .{
 256 .  {* Do not complain on overflow.  *}
 257 .  complain_overflow_dont,
 258 .
 259 .  {* Complain if the value overflows when considered as a signed
 260 .     number one bit larger than the field.  ie. A bitfield of N bits
 261 .     is allowed to represent -2**n to 2**n-1.  *}
 262 .  complain_overflow_bitfield,
 263 .
 264 .  {* Complain if the value overflows when considered as a signed
 265 .     number.  *}
 266 .  complain_overflow_signed,
 267 .
 268 .  {* Complain if the value overflows when considered as an
 269 .     unsigned number.  *}
 270 .  complain_overflow_unsigned
 271 .};
 272
 273 */
 274
 275 /*
 276 SUBSUBSECTION
 277         <<reloc_howto_type>>
 278
 279         The <<reloc_howto_type>> is a structure which contains all the
 280         information that libbfd needs to know to tie up a back end's data.
 281
 282 CODE_FRAGMENT
 283 .struct bfd_symbol;             {* Forward declaration.  *}
 284 .
 285 .struct reloc_howto_struct
 286 .{
 287 .  {*  The type field has mainly a documentary use - the back end can
 288 .      do what it wants with it, though normally the back end's
 289 .      external idea of what a reloc number is stored
 290 .      in this field.  For example, a PC relative word relocation
 291 .      in a coff environment has the type 023 - because that's
 292 .      what the outside world calls a R_PCRWORD reloc.  *}
 293 .  unsigned int type;
 294 .
 295 .  {*  The value the final relocation is shifted right by.  This drops
 296 .      unwanted data from the relocation.  *}
 297 .  unsigned int rightshift;
 298 .
 299 .  {*  The size of the item to be relocated.  This is *not* a
 300 .      power-of-two measure.  To get the number of bytes operated
 301 .      on by a type of relocation, use bfd_get_reloc_size.  *}
 302 .  int size;
 303 .
 304 .  {*  The number of bits in the item to be relocated.  This is used
 305 .      when doing overflow checking.  *}
 306 .  unsigned int bitsize;
 307 .
 308 .  {*  The relocation is relative to the field being relocated.  *}
 309 .  bfd_boolean pc_relative;
 310 .
 311 .  {*  The bit position of the reloc value in the destination.
 312 .      The relocated value is left shifted by this amount.  *}
 313 .  unsigned int bitpos;
 314 .
 315 .  {* What type of overflow error should be checked for when
 316 .     relocating.  *}
 317 .  enum complain_overflow complain_on_overflow;
 318 .
 319 .  {* If this field is non null, then the supplied function is
 320 .     called rather than the normal function.  This allows really
 321 .     strange relocation methods to be accommodated (e.g., i960 callj
 322 .     instructions).  *}
 323 .  bfd_reloc_status_type (*special_function)
 324 .    (bfd *, arelent *, struct bfd_symbol *, void *, asection *,
 325 .     bfd *, char **);
 326 .
 327 .  {* The textual name of the relocation type.  *}
 328 .  char *name;
 329 .
 330 .  {* Some formats record a relocation addend in the section contents
 331 .     rather than with the relocation.  For ELF formats this is the
 332 .     distinction between USE_REL and USE_RELA (though the code checks
 333 .     for USE_REL == 1/0).  The value of this field is TRUE if the
 334 .     addend is recorded with the section contents; when performing a
 335 .     partial link (ld -r) the section contents (the data) will be
 336 .     modified.  The value of this field is FALSE if addends are
 337 .     recorded with the relocation (in arelent.addend); when performing
 338 .     a partial link the relocation will be modified.
 339 .     All relocations for all ELF USE_RELA targets should set this field
 340 .     to FALSE (values of TRUE should be looked on with suspicion).
 341 .     However, the converse is not true: not all relocations of all ELF
 342 .     USE_REL targets set this field to TRUE.  Why this is so is peculiar
 343 .     to each particular target.  For relocs that aren't used in partial
 344 .     links (e.g. GOT stuff) it doesn't matter what this is set to.  *}
 345 .  bfd_boolean partial_inplace;
 346 .
 347 .  {* src_mask selects the part of the instruction (or data) to be used
 348 .     in the relocation sum.  If the target relocations don't have an
 349 .     addend in the reloc, eg. ELF USE_REL, src_mask will normally equal
 350 .     dst_mask to extract the addend from the section contents.  If
 351 .     relocations do have an addend in the reloc, eg. ELF USE_RELA, this
 352 .     field should be zero.  Non-zero values for ELF USE_RELA targets are
 353 .     bogus as in those cases the value in the dst_mask part of the
 354 .     section contents should be treated as garbage.  *}
 355 .  bfd_vma src_mask;
 356 .
 357 .  {* dst_mask selects which parts of the instruction (or data) are
 358 .     replaced with a relocated value.  *}
 359 .  bfd_vma dst_mask;
 360 .
 361 .  {* When some formats create PC relative instructions, they leave
 362 .     the value of the pc of the place being relocated in the offset
 363 .     slot of the instruction, so that a PC relative relocation can
 364 .     be made just by adding in an ordinary offset (e.g., sun3 a.out).
 365 .     Some formats leave the displacement part of an instruction
 366 .     empty (e.g., m88k bcs); this flag signals the fact.  *}
 367 .  bfd_boolean pcrel_offset;
 368 .};
 369 .
 370 */
 371
 372 /*
 373 FUNCTION
 374         The HOWTO Macro
 375
 376 DESCRIPTION
 377         The HOWTO define is horrible and will go away.
 378
 379 .#define HOWTO(C, R, S, B, P, BI, O, SF, NAME, INPLACE, MASKSRC, MASKDST, PC) \
 380 .  { (unsigned) C, R, S, B, P, BI, O, SF, NAME, INPLACE, MASKSRC, MASKDST, PC }
 381
 382 DESCRIPTION
 383         And will be replaced with the totally magic way. But for the
 384         moment, we are compatible, so do it this way.
 385
 386 .#define NEWHOWTO(FUNCTION, NAME, SIZE, REL, IN) \
 387 .  HOWTO (0, 0, SIZE, 0, REL, 0, complain_overflow_dont, FUNCTION, \
 388 .         NAME, FALSE, 0, 0, IN)
 389 .
 390
 391 DESCRIPTION
 392         This is used to fill in an empty howto entry in an array.
 393
 394 .#define EMPTY_HOWTO(C) \
 395 .  HOWTO ((C), 0, 0, 0, FALSE, 0, complain_overflow_dont, NULL, \
 396 .         NULL, FALSE, 0, 0, FALSE)
 397 .
 398
 399 DESCRIPTION
 400         Helper routine to turn a symbol into a relocation value.
 401
 402 .#define HOWTO_PREPARE(relocation, symbol)               \
 403 .  {                                                     \
 404 .    if (symbol != NULL)                                 \
 405 .      {                                                 \
 406 .        if (bfd_is_com_section (symbol->section))       \
 407 .          {                                             \
 408 .            relocation = 0;                             \
 409 .          }                                             \
 410 .        else                                            \
 411 .          {                                             \
 412 .            relocation = symbol->value;                 \
 413 .          }                                             \
 414 .      }                                                 \
 415 .  }
 416 .
 417 */
 418
 419 /*
 420 FUNCTION
 421         bfd_get_reloc_size
 422
 423 SYNOPSIS
 424         unsigned int bfd_get_reloc_size (reloc_howto_type *);
 425
 426 DESCRIPTION
 427         For a reloc_howto_type that operates on a fixed number of bytes,
 428         this returns the number of bytes operated on.
 429  */
 430
 431 unsigned int
 432 bfd_get_reloc_size (reloc_howto_type *howto)
 433 {
 434   switch (howto->size)
 435     {
 436     case 0: return 1;
 437     case 1: return 2;
 438     case 2: return 4;
 439     case 3: return 0;
 440     case 4: return 8;
 441     case 8: return 16;
 442     case -2: return 4;
 443     default: abort ();
 444     }
 445 }
 446
 447 /*
 448 TYPEDEF
 449         arelent_chain
 450
 451 DESCRIPTION
 452
 453         How relocs are tied together in an <<asection>>:
 454
 455 .typedef struct relent_chain
 456 .{
 457 .  arelent relent;
 458 .  struct relent_chain *next;
 459 .}
 460 .arelent_chain;
 461 .
 462 */
 463
 464 /* N_ONES produces N one bits, without overflowing machine arithmetic.  */
 465 #define N_ONES(n) (((((bfd_vma) 1 << ((n) - 1)) - 1) << 1) | 1)
 466
 467 /*
 468 FUNCTION
 469         bfd_check_overflow
 470
 471 SYNOPSIS
 472         bfd_reloc_status_type bfd_check_overflow
 473           (enum complain_overflow how,
 474            unsigned int bitsize,
 475            unsigned int rightshift,
 476            unsigned int addrsize,
 477            bfd_vma relocation);
 478
 479 DESCRIPTION
 480         Perform overflow checking on @var{relocation} which has
 481         @var{bitsize} significant bits and will be shifted right by
 482         @var{rightshift} bits, on a machine with addresses containing
 483         @var{addrsize} significant bits.  The result is either of
 484         @code{bfd_reloc_ok} or @code{bfd_reloc_overflow}.
 485
 486 */
 487
 488 bfd_reloc_status_type
 489 bfd_check_overflow (enum complain_overflow how,
 490                     unsigned int bitsize,
 491                     unsigned int rightshift,
 492                     unsigned int addrsize,
 493                     bfd_vma relocation)
 494 {
 495   bfd_vma fieldmask, addrmask, signmask, ss, a;
 496   bfd_reloc_status_type flag = bfd_reloc_ok;
 497
 498   /* Note: BITSIZE should always be <= ADDRSIZE, but in case it's not,
 499      we'll be permissive: extra bits in the field mask will
 500      automatically extend the address mask for purposes of the
 501      overflow check.  */
 502   fieldmask = N_ONES (bitsize);
 503   signmask = ~fieldmask;
 504   addrmask = N_ONES (addrsize) | (fieldmask << rightshift);
 505   a = (relocation & addrmask) >> rightshift;;
 506
 507   switch (how)
 508     {
 509     case complain_overflow_dont:
 510       break;
 511
 512     case complain_overflow_signed:
 513       /* If any sign bits are set, all sign bits must be set.  That
 514          is, A must be a valid negative address after shifting.  */
 515       signmask = ~ (fieldmask >> 1);
 516       /* Fall thru */
 517
 518     case complain_overflow_bitfield:
 519       /* Bitfields are sometimes signed, sometimes unsigned.  We
 520          explicitly allow an address wrap too, which means a bitfield
 521          of n bits is allowed to store -2**n to 2**n-1.  Thus overflow
 522          if the value has some, but not all, bits set outside the
 523          field.  */
 524       ss = a & signmask;
 525       if (ss != 0 && ss != ((addrmask >> rightshift) & signmask))
 526         flag = bfd_reloc_overflow;
 527       break;
 528
 529     case complain_overflow_unsigned:
 530       /* We have an overflow if the address does not fit in the field.  */
 531       if ((a & signmask) != 0)
 532         flag = bfd_reloc_overflow;
 533       break;
 534
 535     default:
 536       abort ();
 537     }
 538
 539   return flag;
 540 }
 541
 542 /*
 543 FUNCTION
 544         bfd_perform_relocation
 545
 546 SYNOPSIS
 547         bfd_reloc_status_type bfd_perform_relocation
 548           (bfd *abfd,
 549            arelent *reloc_entry,
 550            void *data,
 551            asection *input_section,
 552            bfd *output_bfd,
 553            char **error_message);
 554
 555 DESCRIPTION
 556         If @var{output_bfd} is supplied to this function, the
 557         generated image will be relocatable; the relocations are
 558         copied to the output file after they have been changed to
 559         reflect the new state of the world. There are two ways of
 560         reflecting the results of partial linkage in an output file:
 561         by modifying the output data in place, and by modifying the
 562         relocation record.  Some native formats (e.g., basic a.out and
 563         basic coff) have no way of specifying an addend in the
 564         relocation type, so the addend has to go in the output data.
 565         This is no big deal since in these formats the output data
 566         slot will always be big enough for the addend. Complex reloc
 567         types with addends were invented to solve just this problem.
 568         The @var{error_message} argument is set to an error message if
 569         this return @code{bfd_reloc_dangerous}.
 570
 571 */
 572
 573 bfd_reloc_status_type
 574 bfd_perform_relocation (bfd *abfd,
 575                         arelent *reloc_entry,
 576                         void *data,
 577                         asection *input_section,
 578                         bfd *output_bfd,
 579                         char **error_message)
 580 {
 581   bfd_vma relocation;
 582   bfd_reloc_status_type flag = bfd_reloc_ok;
 583   bfd_size_type octets = reloc_entry->address * bfd_octets_per_byte (abfd);
 584   bfd_vma output_base = 0;
 585   reloc_howto_type *howto = reloc_entry->howto;
 586   asection *reloc_target_output_section;
 587   asymbol *symbol;
 588
 589   symbol = *(reloc_entry->sym_ptr_ptr);
 590   if (bfd_is_abs_section (symbol->section)
 591       && output_bfd != NULL)
 592     {
 593       reloc_entry->address += input_section->output_offset;
 594       return bfd_reloc_ok;
 595     }
 596
 597   /* If we are not producing relocatable output, return an error if
 598      the symbol is not defined.  An undefined weak symbol is
 599      considered to have a value of zero (SVR4 ABI, p. 4-27).  */
 600   if (bfd_is_und_section (symbol->section)
 601       && (symbol->flags & BSF_WEAK) == 0
 602       && output_bfd == NULL)
 603     flag = bfd_reloc_undefined;
 604
 605   /* If there is a function supplied to handle this relocation type,
 606      call it.  It'll return `bfd_reloc_continue' if further processing
 607      can be done.  */
 608   if (howto->special_function)
 609     {
 610       bfd_reloc_status_type cont;
 611       cont = howto->special_function (abfd, reloc_entry, symbol, data,
 612                                       input_section, output_bfd,
 613                                       error_message);
 614       if (cont != bfd_reloc_continue)
 615         return cont;
 616     }
 617
 618   /* Is the address of the relocation really within the section?  */
 619   if (reloc_entry->address > bfd_get_section_limit (abfd, input_section))
 620     return bfd_reloc_outofrange;
 621
 622   /* Work out which section the relocation is targeted at and the
 623      initial relocation command value.  */
 624
 625   /* Get symbol value.  (Common symbols are special.)  */
 626   if (bfd_is_com_section (symbol->section))
 627     relocation = 0;
 628   else
 629     relocation = symbol->value;
 630
 631   reloc_target_output_section = symbol->section->output_section;
 632
 633   /* Convert input-section-relative symbol value to absolute.  */
 634   if ((output_bfd && ! howto->partial_inplace)
 635       || reloc_target_output_section == NULL)
 636     output_base = 0;
 637   else
 638     output_base = reloc_target_output_section->vma;
 639
 640   relocation += output_base + symbol->section->output_offset;
 641
 642   /* Add in supplied addend.  */
 643   relocation += reloc_entry->addend;
 644
 645   /* Here the variable relocation holds the final address of the
 646      symbol we are relocating against, plus any addend.  */
 647
 648   if (howto->pc_relative)
 649     {
 650       /* This is a PC relative relocation.  We want to set RELOCATION
 651          to the distance between the address of the symbol and the
 652          location.  RELOCATION is already the address of the symbol.
 653
 654          We start by subtracting the address of the section containing
 655          the location.
 656
 657          If pcrel_offset is set, we must further subtract the position
 658          of the location within the section.  Some targets arrange for
 659          the addend to be the negative of the position of the location
 660          within the section; for example, i386-aout does this.  For
 661          i386-aout, pcrel_offset is FALSE.  Some other targets do not
 662          include the position of the location; for example, m88kbcs,
 663          or ELF.  For those targets, pcrel_offset is TRUE.
 664
 665          If we are producing relocatable output, then we must ensure
 666          that this reloc will be correctly computed when the final
 667          relocation is done.  If pcrel_offset is FALSE we want to wind
 668          up with the negative of the location within the section,
 669          which means we must adjust the existing addend by the change
 670          in the location within the section.  If pcrel_offset is TRUE
 671          we do not want to adjust the existing addend at all.
 672
 673          FIXME: This seems logical to me, but for the case of
 674          producing relocatable output it is not what the code
 675          actually does.  I don't want to change it, because it seems
 676          far too likely that something will break.  */
 677
 678       relocation -=
 679         input_section->output_section->vma + input_section->output_offset;
 680
 681       if (howto->pcrel_offset)
 682         relocation -= reloc_entry->address;
 683     }
 684
 685   if (output_bfd != NULL)
 686     {
 687       if (! howto->partial_inplace)
 688         {
 689           /* This is a partial relocation, and we want to apply the relocation
 690              to the reloc entry rather than the raw data. Modify the reloc
 691              inplace to reflect what we now know.  */
 692           reloc_entry->addend = relocation;
 693           reloc_entry->address += input_section->output_offset;
 694           return flag;
 695         }
 696       else
 697         {
 698           /* This is a partial relocation, but inplace, so modify the
 699              reloc record a bit.
 700
 701              If we've relocated with a symbol with a section, change
 702              into a ref to the section belonging to the symbol.  */
 703
 704           reloc_entry->address += input_section->output_offset;
 705
 706           /* WTF?? */
 707           if (abfd->xvec->flavour == bfd_target_coff_flavour
 708               && strcmp (abfd->xvec->name, "coff-Intel-little") != 0
 709               && strcmp (abfd->xvec->name, "coff-Intel-big") != 0)
 710             {
 711               /* For m68k-coff, the addend was being subtracted twice during
 712                  relocation with -r.  Removing the line below this comment
 713                  fixes that problem; see PR 2953.
 714
 715 However, Ian wrote the following, regarding removing the line below,
 716 which explains why it is still enabled:  --djm
 717
 718 If you put a patch like that into BFD you need to check all the COFF
 719 linkers.  I am fairly certain that patch will break coff-i386 (e.g.,
 720 SCO); see coff_i386_reloc in coff-i386.c where I worked around the
 721 problem in a different way.  There may very well be a reason that the
 722 code works as it does.
 723
 724 Hmmm.  The first obvious point is that bfd_perform_relocation should
 725 not have any tests that depend upon the flavour.  It's seem like
 726 entirely the wrong place for such a thing.  The second obvious point
 727 is that the current code ignores the reloc addend when producing
 728 relocatable output for COFF.  That's peculiar.  In fact, I really
 729 have no idea what the point of the line you want to remove is.
 730
 731 A typical COFF reloc subtracts the old value of the symbol and adds in
 732 the new value to the location in the object file (if it's a pc
 733 relative reloc it adds the difference between the symbol value and the
 734 location).  When relocating we need to preserve that property.
 735
 736 BFD handles this by setting the addend to the negative of the old
 737 value of the symbol.  Unfortunately it handles common symbols in a
 738 non-standard way (it doesn't subtract the old value) but that's a
 739 different story (we can't change it without losing backward
 740 compatibility with old object files) (coff-i386 does subtract the old
 741 value, to be compatible with existing coff-i386 targets, like SCO).
 742
 743 So everything works fine when not producing relocatable output.  When
 744 we are producing relocatable output, logically we should do exactly
 745 what we do when not producing relocatable output.  Therefore, your
 746 patch is correct.  In fact, it should probably always just set
 747 reloc_entry->addend to 0 for all cases, since it is, in fact, going to
 748 add the value into the object file.  This won't hurt the COFF code,
 749 which doesn't use the addend; I'm not sure what it will do to other
 750 formats (the thing to check for would be whether any formats both use
 751 the addend and set partial_inplace).
 752
 753 When I wanted to make coff-i386 produce relocatable output, I ran
 754 into the problem that you are running into: I wanted to remove that
 755 line.  Rather than risk it, I made the coff-i386 relocs use a special
 756 function; it's coff_i386_reloc in coff-i386.c.  The function
 757 specifically adds the addend field into the object file, knowing that
 758 bfd_perform_relocation is not going to.  If you remove that line, then
 759 coff-i386.c will wind up adding the addend field in twice.  It's
 760 trivial to fix; it just needs to be done.
 761
 762 The problem with removing the line is just that it may break some
 763 working code.  With BFD it's hard to be sure of anything.  The right
 764 way to deal with this is simply to build and test at least all the
 765 supported COFF targets.  It should be straightforward if time and disk
 766 space consuming.  For each target:
 767     1) build the linker
 768     2) generate some executable, and link it using -r (I would
 769        probably use paranoia.o and link against newlib/libc.a, which
 770        for all the supported targets would be available in
 771        /usr/cygnus/progressive/H-host/target/lib/libc.a).
 772     3) make the change to reloc.c
 773     4) rebuild the linker
 774     5) repeat step 2
 775     6) if the resulting object files are the same, you have at least
 776        made it no worse
 777     7) if they are different you have to figure out which version is
 778        right
 779 */
 780               relocation -= reloc_entry->addend;
 781               reloc_entry->addend = 0;
 782             }
 783           else
 784             {
 785               reloc_entry->addend = relocation;
 786             }
 787         }
 788     }
 789   else
 790     {
 791       reloc_entry->addend = 0;
 792     }
 793
 794   /* FIXME: This overflow checking is incomplete, because the value
 795      might have overflowed before we get here.  For a correct check we
 796      need to compute the value in a size larger than bitsize, but we
 797      can't reasonably do that for a reloc the same size as a host
 798      machine word.
 799      FIXME: We should also do overflow checking on the result after
 800      adding in the value contained in the object file.  */
 801   if (howto->complain_on_overflow != complain_overflow_dont
 802       && flag == bfd_reloc_ok)
 803     flag = bfd_check_overflow (howto->complain_on_overflow,
 804                                howto->bitsize,
 805                                howto->rightshift,
 806                                bfd_arch_bits_per_address (abfd),
 807                                relocation);
 808
 809   /* Either we are relocating all the way, or we don't want to apply
 810      the relocation to the reloc entry (probably because there isn't
 811      any room in the output format to describe addends to relocs).  */
 812
 813   /* The cast to bfd_vma avoids a bug in the Alpha OSF/1 C compiler
 814      (OSF version 1.3, compiler version 3.11).  It miscompiles the
 815      following program:
 816
 817      struct str
 818      {
 819        unsigned int i0;
 820      } s = { 0 };
 821
 822      int
 823      main ()
 824      {
 825        unsigned long x;
 826
 827        x = 0x100000000;
 828        x <<= (unsigned long) s.i0;
 829        if (x == 0)
 830          printf ("failed\n");
 831        else
 832          printf ("succeeded (%lx)\n", x);
 833      }
 834      */
 835
 836   relocation >>= (bfd_vma) howto->rightshift;
 837
 838   /* Shift everything up to where it's going to be used.  */
 839   relocation <<= (bfd_vma) howto->bitpos;
 840
 841   /* Wait for the day when all have the mask in them.  */
 842
 843   /* What we do:
 844      i instruction to be left alone
 845      o offset within instruction
 846      r relocation offset to apply
 847      S src mask
 848      D dst mask
 849      N ~dst mask
 850      A part 1
 851      B part 2
 852      R result
 853
 854      Do this:
 855      ((  i i i i i o o o o o  from bfd_get<size>
 856      and           S S S S S) to get the size offset we want
 857      +   r r r r r r r r r r) to get the final value to place
 858      and           D D D D D  to chop to right size
 859      -----------------------
 860      =             A A A A A
 861      And this:
 862      (   i i i i i o o o o o  from bfd_get<size>
 863      and N N N N N          ) get instruction
 864      -----------------------
 865      =   B B B B B
 866
 867      And then:
 868      (   B B B B B
 869      or            A A A A A)
 870      -----------------------
 871      =   R R R R R R R R R R  put into bfd_put<size>
 872      */
 873
 874 #define DOIT(x) \
 875   x = ( (x & ~howto->dst_mask) | (((x & howto->src_mask) +  relocation) & howto->dst_mask))
 876
 877   switch (howto->size)
 878     {
 879     case 0:
 880       {
 881         char x = bfd_get_8 (abfd, (char *) data + octets);
 882         DOIT (x);
 883         bfd_put_8 (abfd, x, (unsigned char *) data + octets);
 884       }
 885       break;
 886
 887     case 1:
 888       {
 889         short x = bfd_get_16 (abfd, (bfd_byte *) data + octets);
 890         DOIT (x);
 891         bfd_put_16 (abfd, (bfd_vma) x, (unsigned char *) data + octets);
 892       }
 893       break;
 894     case 2:
 895       {
 896         long x = bfd_get_32 (abfd, (bfd_byte *) data + octets);
 897         DOIT (x);
 898         bfd_put_32 (abfd, (bfd_vma) x, (bfd_byte *) data + octets);
 899       }
 900       break;
 901     case -2:
 902       {
 903         long x = bfd_get_32 (abfd, (bfd_byte *) data + octets);
 904         relocation = -relocation;
 905         DOIT (x);
 906         bfd_put_32 (abfd, (bfd_vma) x, (bfd_byte *) data + octets);
 907       }
 908       break;
 909
 910     case -1:
 911       {
 912         long x = bfd_get_16 (abfd, (bfd_byte *) data + octets);
 913         relocation = -relocation;
 914         DOIT (x);
 915         bfd_put_16 (abfd, (bfd_vma) x, (bfd_byte *) data + octets);
 916       }
 917       break;
 918
 919     case 3:
 920       /* Do nothing */
 921       break;
 922
 923     case 4:
 924 #ifdef BFD64
 925       {
 926         bfd_vma x = bfd_get_64 (abfd, (bfd_byte *) data + octets);
 927         DOIT (x);
 928         bfd_put_64 (abfd, x, (bfd_byte *) data + octets);
 929       }
 930 #else
 931       abort ();
 932 #endif
 933       break;
 934     default:
 935       return bfd_reloc_other;
 936     }
 937
 938   return flag;
 939 }
 940
 941 /*
 942 FUNCTION
 943         bfd_install_relocation
 944
 945 SYNOPSIS
 946         bfd_reloc_status_type bfd_install_relocation
 947           (bfd *abfd,
 948            arelent *reloc_entry,
 949            void *data, bfd_vma data_start,
 950            asection *input_section,
 951            char **error_message);
 952
 953 DESCRIPTION
 954         This looks remarkably like <<bfd_perform_relocation>>, except it
 955         does not expect that the section contents have been filled in.
 956         I.e., it's suitable for use when creating, rather than applying
 957         a relocation.
 958
 959         For now, this function should be considered reserved for the
 960         assembler.
 961 */
 962
 963 bfd_reloc_status_type
 964 bfd_install_relocation (bfd *abfd,
 965                         arelent *reloc_entry,
 966                         void *data_start,
 967                         bfd_vma data_start_offset,
 968                         asection *input_section,
 969                         char **error_message)
 970 {
 971   bfd_vma relocation;
 972   bfd_reloc_status_type flag = bfd_reloc_ok;
 973   bfd_size_type octets = reloc_entry->address * bfd_octets_per_byte (abfd);
 974   bfd_vma output_base = 0;
 975   reloc_howto_type *howto = reloc_entry->howto;
 976   asection *reloc_target_output_section;
 977   asymbol *symbol;
 978   bfd_byte *data;
 979
 980   symbol = *(reloc_entry->sym_ptr_ptr);
 981   if (bfd_is_abs_section (symbol->section))
 982     {
 983       reloc_entry->address += input_section->output_offset;
 984       return bfd_reloc_ok;
 985     }
 986
 987   /* If there is a function supplied to handle this relocation type,
 988      call it.  It'll return `bfd_reloc_continue' if further processing
 989      can be done.  */
 990   if (howto->special_function)
 991     {
 992       bfd_reloc_status_type cont;
 993
 994       /* XXX - The special_function calls haven't been fixed up to deal
 995          with creating new relocations and section contents.  */
 996       cont = howto->special_function (abfd, reloc_entry, symbol,
 997                                       /* XXX - Non-portable! */
 998                                       ((bfd_byte *) data_start
 999                                        - data_start_offset),
1000                                       input_section, abfd, error_message);
1001       if (cont != bfd_reloc_continue)
1002         return cont;
1003     }
1004
1005   /* Is the address of the relocation really within the section?  */
1006   if (reloc_entry->address > bfd_get_section_limit (abfd, input_section))
1007     return bfd_reloc_outofrange;
1008
1009   /* Work out which section the relocation is targeted at and the
1010      initial relocation command value.  */
1011
1012   /* Get symbol value.  (Common symbols are special.)  */
1013   if (bfd_is_com_section (symbol->section))
1014     relocation = 0;
1015   else
1016     relocation = symbol->value;
1017
1018   reloc_target_output_section = symbol->section->output_section;
1019
1020   /* Convert input-section-relative symbol value to absolute.  */
1021   if (! howto->partial_inplace)
1022     output_base = 0;
1023   else
1024     output_base = reloc_target_output_section->vma;
1025
1026   relocation += output_base + symbol->section->output_offset;
1027
1028   /* Add in supplied addend.  */
1029   relocation += reloc_entry->addend;
1030
1031   /* Here the variable relocation holds the final address of the
1032      symbol we are relocating against, plus any addend.  */
1033
1034   if (howto->pc_relative)
1035     {
1036       /* This is a PC relative relocation.  We want to set RELOCATION
1037          to the distance between the address of the symbol and the
1038          location.  RELOCATION is already the address of the symbol.
1039
1040          We start by subtracting the address of the section containing
1041          the location.
1042
1043          If pcrel_offset is set, we must further subtract the position
1044          of the location within the section.  Some targets arrange for
1045          the addend to be the negative of the position of the location
1046          within the section; for example, i386-aout does this.  For
1047          i386-aout, pcrel_offset is FALSE.  Some other targets do not
1048          include the position of the location; for example, m88kbcs,
1049          or ELF.  For those targets, pcrel_offset is TRUE.
1050
1051          If we are producing relocatable output, then we must ensure
1052          that this reloc will be correctly computed when the final
1053          relocation is done.  If pcrel_offset is FALSE we want to wind
1054          up with the negative of the location within the section,
1055          which means we must adjust the existing addend by the change
1056          in the location within the section.  If pcrel_offset is TRUE
1057          we do not want to adjust the existing addend at all.
1058
1059          FIXME: This seems logical to me, but for the case of
1060          producing relocatable output it is not what the code
1061          actually does.  I don't want to change it, because it seems
1062          far too likely that something will break.  */
1063
1064       relocation -=
1065         input_section->output_section->vma + input_section->output_offset;
1066
1067       if (howto->pcrel_offset && howto->partial_inplace)
1068         relocation -= reloc_entry->address;
1069     }
1070
1071   if (! howto->partial_inplace)
1072     {
1073       /* This is a partial relocation, and we want to apply the relocation
1074          to the reloc entry rather than the raw data. Modify the reloc
1075          inplace to reflect what we now know.  */
1076       reloc_entry->addend = relocation;
1077       reloc_entry->address += input_section->output_offset;
1078       return flag;
1079     }
1080   else
1081     {
1082       /* This is a partial relocation, but inplace, so modify the
1083          reloc record a bit.
1084
1085          If we've relocated with a symbol with a section, change
1086          into a ref to the section belonging to the symbol.  */
1087       reloc_entry->address += input_section->output_offset;
1088
1089       /* WTF?? */
1090       if (abfd->xvec->flavour == bfd_target_coff_flavour
1091           && strcmp (abfd->xvec->name, "coff-Intel-little") != 0
1092           && strcmp (abfd->xvec->name, "coff-Intel-big") != 0)
1093         {
1094
1095           /* For m68k-coff, the addend was being subtracted twice during
1096              relocation with -r.  Removing the line below this comment
1097              fixes that problem; see PR 2953.
1098
1099 However, Ian wrote the following, regarding removing the line below,
1100 which explains why it is still enabled:  --djm
1101
1102 If you put a patch like that into BFD you need to check all the COFF
1103 linkers.  I am fairly certain that patch will break coff-i386 (e.g.,
1104 SCO); see coff_i386_reloc in coff-i386.c where I worked around the
1105 problem in a different way.  There may very well be a reason that the
1106 code works as it does.
1107
1108 Hmmm.  The first obvious point is that bfd_install_relocation should
1109 not have any tests that depend upon the flavour.  It's seem like
1110 entirely the wrong place for such a thing.  The second obvious point
1111 is that the current code ignores the reloc addend when producing
1112 relocatable output for COFF.  That's peculiar.  In fact, I really
1113 have no idea what the point of the line you want to remove is.
1114
1115 A typical COFF reloc subtracts the old value of the symbol and adds in
1116 the new value to the location in the object file (if it's a pc
1117 relative reloc it adds the difference between the symbol value and the
1118 location).  When relocating we need to preserve that property.
1119
1120 BFD handles this by setting the addend to the negative of the old
1121 value of the symbol.  Unfortunately it handles common symbols in a
1122 non-standard way (it doesn't subtract the old value) but that's a
1123 different story (we can't change it without losing backward
1124 compatibility with old object files) (coff-i386 does subtract the old
1125 value, to be compatible with existing coff-i386 targets, like SCO).
1126
1127 So everything works fine when not producing relocatable output.  When
1128 we are producing relocatable output, logically we should do exactly
1129 what we do when not producing relocatable output.  Therefore, your
1130 patch is correct.  In fact, it should probably always just set
1131 reloc_entry->addend to 0 for all cases, since it is, in fact, going to
1132 add the value into the object file.  This won't hurt the COFF code,
1133 which doesn't use the addend; I'm not sure what it will do to other
1134 formats (the thing to check for would be whether any formats both use
1135 the addend and set partial_inplace).
1136
1137 When I wanted to make coff-i386 produce relocatable output, I ran
1138 into the problem that you are running into: I wanted to remove that
1139 line.  Rather than risk it, I made the coff-i386 relocs use a special
1140 function; it's coff_i386_reloc in coff-i386.c.  The function
1141 specifically adds the addend field into the object file, knowing that
1142 bfd_install_relocation is not going to.  If you remove that line, then
1143 coff-i386.c will wind up adding the addend field in twice.  It's
1144 trivial to fix; it just needs to be done.
1145
1146 The problem with removing the line is just that it may break some
1147 working code.  With BFD it's hard to be sure of anything.  The right
1148 way to deal with this is simply to build and test at least all the
1149 supported COFF targets.  It should be straightforward if time and disk
1150 space consuming.  For each target:
1151     1) build the linker
1152     2) generate some executable, and link it using -r (I would
1153        probably use paranoia.o and link against newlib/libc.a, which
1154        for all the supported targets would be available in
1155        /usr/cygnus/progressive/H-host/target/lib/libc.a).
1156     3) make the change to reloc.c
1157     4) rebuild the linker
1158     5) repeat step 2
1159     6) if the resulting object files are the same, you have at least
1160        made it no worse
1161     7) if they are different you have to figure out which version is
1162        right.  */
1163           relocation -= reloc_entry->addend;
1164           /* FIXME: There should be no target specific code here...  */
1165           if (strcmp (abfd->xvec->name, "coff-z8k") != 0)
1166             reloc_entry->addend = 0;
1167         }
1168       else
1169         {
1170           reloc_entry->addend = relocation;
1171         }
1172     }
1173
1174   /* FIXME: This overflow checking is incomplete, because the value
1175      might have overflowed before we get here.  For a correct check we
1176      need to compute the value in a size larger than bitsize, but we
1177      can't reasonably do that for a reloc the same size as a host
1178      machine word.
1179      FIXME: We should also do overflow checking on the result after
1180      adding in the value contained in the object file.  */
1181   if (howto->complain_on_overflow != complain_overflow_dont)
1182     flag = bfd_check_overflow (howto->complain_on_overflow,
1183                                howto->bitsize,
1184                                howto->rightshift,
1185                                bfd_arch_bits_per_address (abfd),
1186                                relocation);
1187
1188   /* Either we are relocating all the way, or we don't want to apply
1189      the relocation to the reloc entry (probably because there isn't
1190      any room in the output format to describe addends to relocs).  */
1191
1192   /* The cast to bfd_vma avoids a bug in the Alpha OSF/1 C compiler
1193      (OSF version 1.3, compiler version 3.11).  It miscompiles the
1194      following program:
1195
1196      struct str
1197      {
1198        unsigned int i0;
1199      } s = { 0 };
1200
1201      int
1202      main ()
1203      {
1204        unsigned long x;
1205
1206        x = 0x100000000;
1207        x <<= (unsigned long) s.i0;
1208        if (x == 0)
1209          printf ("failed\n");
1210        else
1211          printf ("succeeded (%lx)\n", x);
1212      }
1213      */
1214
1215   relocation >>= (bfd_vma) howto->rightshift;
1216
1217   /* Shift everything up to where it's going to be used.  */
1218   relocation <<= (bfd_vma) howto->bitpos;
1219
1220   /* Wait for the day when all have the mask in them.  */
1221
1222   /* What we do:
1223      i instruction to be left alone
1224      o offset within instruction
1225      r relocation offset to apply
1226      S src mask
1227      D dst mask
1228      N ~dst mask
1229      A part 1
1230      B part 2
1231      R result
1232
1233      Do this:
1234      ((  i i i i i o o o o o  from bfd_get<size>
1235      and           S S S S S) to get the size offset we want
1236      +   r r r r r r r r r r) to get the final value to place
1237      and           D D D D D  to chop to right size
1238      -----------------------
1239      =             A A A A A
1240      And this:
1241      (   i i i i i o o o o o  from bfd_get<size>
1242      and N N N N N          ) get instruction
1243      -----------------------
1244      =   B B B B B
1245
1246      And then:
1247      (   B B B B B
1248      or            A A A A A)
1249      -----------------------
1250      =   R R R R R R R R R R  put into bfd_put<size>
1251      */
1252
1253 #define DOIT(x) \
1254   x = ( (x & ~howto->dst_mask) | (((x & howto->src_mask) +  relocation) & howto->dst_mask))
1255
1256   data = (bfd_byte *) data_start + (octets - data_start_offset);
1257
1258   switch (howto->size)
1259     {
1260     case 0:
1261       {
1262         char x = bfd_get_8 (abfd, data);
1263         DOIT (x);
1264         bfd_put_8 (abfd, x, data);
1265       }
1266       break;
1267
1268     case 1:
1269       {
1270         short x = bfd_get_16 (abfd, data);
1271         DOIT (x);
1272         bfd_put_16 (abfd, (bfd_vma) x, data);
1273       }
1274       break;
1275     case 2:
1276       {
1277         long x = bfd_get_32 (abfd, data);
1278         DOIT (x);
1279         bfd_put_32 (abfd, (bfd_vma) x, data);
1280       }
1281       break;
1282     case -2:
1283       {
1284         long x = bfd_get_32 (abfd, data);
1285         relocation = -relocation;
1286         DOIT (x);
1287         bfd_put_32 (abfd, (bfd_vma) x, data);
1288       }
1289       break;
1290
1291     case 3:
1292       /* Do nothing */
1293       break;
1294
1295     case 4:
1296       {
1297         bfd_vma x = bfd_get_64 (abfd, data);
1298         DOIT (x);
1299         bfd_put_64 (abfd, x, data);
1300       }
1301       break;
1302     default:
1303       return bfd_reloc_other;
1304     }
1305
1306   return flag;
1307 }
1308
1309 /* This relocation routine is used by some of the backend linkers.
1310    They do not construct asymbol or arelent structures, so there is no
1311    reason for them to use bfd_perform_relocation.  Also,
1312    bfd_perform_relocation is so hacked up it is easier to write a new
1313    function than to try to deal with it.
1314
1315    This routine does a final relocation.  Whether it is useful for a
1316    relocatable link depends upon how the object format defines
1317    relocations.
1318
1319    FIXME: This routine ignores any special_function in the HOWTO,
1320    since the existing special_function values have been written for
1321    bfd_perform_relocation.
1322
1323    HOWTO is the reloc howto information.
1324    INPUT_BFD is the BFD which the reloc applies to.
1325    INPUT_SECTION is the section which the reloc applies to.
1326    CONTENTS is the contents of the section.
1327    ADDRESS is the address of the reloc within INPUT_SECTION.
1328    VALUE is the value of the symbol the reloc refers to.
1329    ADDEND is the addend of the reloc.  */
1330
1331 bfd_reloc_status_type
1332 _bfd_final_link_relocate (reloc_howto_type *howto,
1333                           bfd *input_bfd,
1334                           asection *input_section,
1335                           bfd_byte *contents,
1336                           bfd_vma address,
1337                           bfd_vma value,
1338                           bfd_vma addend)
1339 {
1340   bfd_vma relocation;
1341
1342   /* Sanity check the address.  */
1343   if (address > bfd_get_section_limit (input_bfd, input_section))
1344     return bfd_reloc_outofrange;
1345
1346   /* This function assumes that we are dealing with a basic relocation
1347      against a symbol.  We want to compute the value of the symbol to
1348      relocate to.  This is just VALUE, the value of the symbol, plus
1349      ADDEND, any addend associated with the reloc.  */
1350   relocation = value + addend;
1351
1352   /* If the relocation is PC relative, we want to set RELOCATION to
1353      the distance between the symbol (currently in RELOCATION) and the
1354      location we are relocating.  Some targets (e.g., i386-aout)
1355      arrange for the contents of the section to be the negative of the
1356      offset of the location within the section; for such targets
1357      pcrel_offset is FALSE.  Other targets (e.g., m88kbcs or ELF)
1358      simply leave the contents of the section as zero; for such
1359      targets pcrel_offset is TRUE.  If pcrel_offset is FALSE we do not
1360      need to subtract out the offset of the location within the
1361      section (which is just ADDRESS).  */
1362   if (howto->pc_relative)
1363     {
1364       relocation -= (input_section->output_section->vma
1365                      + input_section->output_offset);
1366       if (howto->pcrel_offset)
1367         relocation -= address;
1368     }
1369
1370   return _bfd_relocate_contents (howto, input_bfd, relocation,
1371                                  contents + address);
1372 }
1373
1374 /* Relocate a given location using a given value and howto.  */
1375
1376 bfd_reloc_status_type
1377 _bfd_relocate_contents (reloc_howto_type *howto,
1378                         bfd *input_bfd,
1379                         bfd_vma relocation,
1380                         bfd_byte *location)
1381 {
1382   int size;
1383   bfd_vma x = 0;
1384   bfd_reloc_status_type flag;
1385   unsigned int rightshift = howto->rightshift;
1386   unsigned int bitpos = howto->bitpos;
1387
1388   /* If the size is negative, negate RELOCATION.  This isn't very
1389      general.  */
1390   if (howto->size < 0)
1391     relocation = -relocation;
1392
1393   /* Get the value we are going to relocate.  */
1394   size = bfd_get_reloc_size (howto);
1395   switch (size)
1396     {
1397     default:
1398     case 0:
1399       abort ();
1400     case 1:
1401       x = bfd_get_8 (input_bfd, location);
1402       break;
1403     case 2:
1404       x = bfd_get_16 (input_bfd, location);
1405       break;
1406     case 4:
1407       x = bfd_get_32 (input_bfd, location);
1408       break;
1409     case 8:
1410 #ifdef BFD64
1411       x = bfd_get_64 (input_bfd, location);
1412 #else
1413       abort ();
1414 #endif
1415       break;
1416     }
1417
1418   /* Check for overflow.  FIXME: We may drop bits during the addition
1419      which we don't check for.  We must either check at every single
1420      operation, which would be tedious, or we must do the computations
1421      in a type larger than bfd_vma, which would be inefficient.  */
1422   flag = bfd_reloc_ok;
1423   if (howto->complain_on_overflow != complain_overflow_dont)
1424     {
1425       bfd_vma addrmask, fieldmask, signmask, ss;
1426       bfd_vma a, b, sum;
1427
1428       /* Get the values to be added together.  For signed and unsigned
1429          relocations, we assume that all values should be truncated to
1430          the size of an address.  For bitfields, all the bits matter.
1431          See also bfd_check_overflow.  */
1432       fieldmask = N_ONES (howto->bitsize);
1433       signmask = ~fieldmask;
1434       addrmask = (N_ONES (bfd_arch_bits_per_address (input_bfd))
1435                   | (fieldmask << rightshift));
1436       a = (relocation & addrmask) >> rightshift;
1437       b = (x & howto->src_mask & addrmask) >> bitpos;
1438       addrmask >>= rightshift;
1439
1440       switch (howto->complain_on_overflow)
1441         {
1442         case complain_overflow_signed:
1443           /* If any sign bits are set, all sign bits must be set.
1444              That is, A must be a valid negative address after
1445              shifting.  */
1446           signmask = ~(fieldmask >> 1);
1447           /* Fall thru */
1448
1449         case complain_overflow_bitfield:
1450           /* Much like the signed check, but for a field one bit
1451              wider.  We allow a bitfield to represent numbers in the
1452              range -2**n to 2**n-1, where n is the number of bits in the
1453              field.  Note that when bfd_vma is 32 bits, a 32-bit reloc
1454              can't overflow, which is exactly what we want.  */
1455           ss = a & signmask;
1456           if (ss != 0 && ss != (addrmask & signmask))
1457             flag = bfd_reloc_overflow;
1458
1459           /* We only need this next bit of code if the sign bit of B
1460              is below the sign bit of A.  This would only happen if
1461              SRC_MASK had fewer bits than BITSIZE.  Note that if
1462              SRC_MASK has more bits than BITSIZE, we can get into
1463              trouble; we would need to verify that B is in range, as
1464              we do for A above.  */
1465           ss = ((~howto->src_mask) >> 1) & howto->src_mask;
1466           ss >>= bitpos;
1467
1468           /* Set all the bits above the sign bit.  */
1469           b = (b ^ ss) - ss;
1470
1471           /* Now we can do the addition.  */
1472           sum = a + b;
1473
1474           /* See if the result has the correct sign.  Bits above the
1475              sign bit are junk now; ignore them.  If the sum is
1476              positive, make sure we did not have all negative inputs;
1477              if the sum is negative, make sure we did not have all
1478              positive inputs.  The test below looks only at the sign
1479              bits, and it really just
1480                  SIGN (A) == SIGN (B) && SIGN (A) != SIGN (SUM)
1481
1482              We mask with addrmask here to explicitly allow an address
1483              wrap-around.  The Linux kernel relies on it, and it is
1484              the only way to write assembler code which can run when
1485              loaded at a location 0x80000000 away from the location at
1486              which it is linked.  */
1487           if (((~(a ^ b)) & (a ^ sum)) & signmask & addrmask)
1488             flag = bfd_reloc_overflow;
1489           break;
1490
1491         case complain_overflow_unsigned:
1492           /* Checking for an unsigned overflow is relatively easy:
1493              trim the addresses and add, and trim the result as well.
1494              Overflow is normally indicated when the result does not
1495              fit in the field.  However, we also need to consider the
1496              case when, e.g., fieldmask is 0x7fffffff or smaller, an
1497              input is 0x80000000, and bfd_vma is only 32 bits; then we
1498              will get sum == 0, but there is an overflow, since the
1499              inputs did not fit in the field.  Instead of doing a
1500              separate test, we can check for this by or-ing in the
1501              operands when testing for the sum overflowing its final
1502              field.  */
1503           sum = (a + b) & addrmask;
1504           if ((a | b | sum) & signmask)
1505             flag = bfd_reloc_overflow;
1506           break;
1507
1508         default:
1509           abort ();
1510         }
1511     }
1512
1513   /* Put RELOCATION in the right bits.  */
1514   relocation >>= (bfd_vma) rightshift;
1515   relocation <<= (bfd_vma) bitpos;
1516
1517   /* Add RELOCATION to the right bits of X.  */
1518   x = ((x & ~howto->dst_mask)
1519        | (((x & howto->src_mask) + relocation) & howto->dst_mask));
1520
1521   /* Put the relocated value back in the object file.  */
1522   switch (size)
1523     {
1524     default:
1525       abort ();
1526     case 1:
1527       bfd_put_8 (input_bfd, x, location);
1528       break;
1529     case 2:
1530       bfd_put_16 (input_bfd, x, location);
1531       break;
1532     case 4:
1533       bfd_put_32 (input_bfd, x, location);
1534       break;
1535     case 8:
1536 #ifdef BFD64
1537       bfd_put_64 (input_bfd, x, location);
1538 #else
1539       abort ();
1540 #endif
1541       break;
1542     }
1543
1544   return flag;
1545 }
1546
1547 /* Clear a given location using a given howto, by applying a fixed relocation
1548    value and discarding any in-place addend.  This is used for fixed-up
1549    relocations against discarded symbols, to make ignorable debug or unwind
1550    information more obvious.  */
1551
1552 void
1553 _bfd_clear_contents (reloc_howto_type *howto,
1554                      bfd *input_bfd,
1555                      asection *input_section,
1556                      bfd_byte *location)
1557 {
1558   int size;
1559   bfd_vma x = 0;
1560
1561   /* Get the value we are going to relocate.  */
1562   size = bfd_get_reloc_size (howto);
1563   switch (size)
1564     {
1565     default:
1566     case 0:
1567       abort ();
1568     case 1:
1569       x = bfd_get_8 (input_bfd, location);
1570       break;
1571     case 2:
1572       x = bfd_get_16 (input_bfd, location);
1573       break;
1574     case 4:
1575       x = bfd_get_32 (input_bfd, location);
1576       break;
1577     case 8:
1578 #ifdef BFD64
1579       x = bfd_get_64 (input_bfd, location);
1580 #else
1581       abort ();
1582 #endif
1583       break;
1584     }
1585
1586   /* Zero out the unwanted bits of X.  */
1587   x &= ~howto->dst_mask;
1588
1589   /* For a range list, use 1 instead of 0 as placeholder.  0
1590      would terminate the list, hiding any later entries.  */
1591   if (strcmp (bfd_get_section_name (input_bfd, input_section),
1592               ".debug_ranges") == 0
1593       && (howto->dst_mask & 1) != 0)
1594     x |= 1;
1595
1596   /* Put the relocated value back in the object file.  */
1597   switch (size)
1598     {
1599     default:
1600     case 0:
1601       abort ();
1602     case 1:
1603       bfd_put_8 (input_bfd, x, location);
1604       break;
1605     case 2:
1606       bfd_put_16 (input_bfd, x, location);
1607       break;
1608     case 4:
1609       bfd_put_32 (input_bfd, x, location);
1610       break;
1611     case 8:
1612 #ifdef BFD64
1613       bfd_put_64 (input_bfd, x, location);
1614 #else
1615       abort ();
1616 #endif
1617       break;
1618     }
1619 }
1620
1621 /*
1622 DOCDD
1623 INODE
1624         howto manager,  , typedef arelent, Relocations
1625
1626 SUBSECTION
1627         The howto manager
1628
1629         When an application wants to create a relocation, but doesn't
1630         know what the target machine might call it, it can find out by
1631         using this bit of code.
1632
1633 */
1634
1635 /*
1636 TYPEDEF
1637         bfd_reloc_code_type
1638
1639 DESCRIPTION
1640         The insides of a reloc code.  The idea is that, eventually, there
1641         will be one enumerator for every type of relocation we ever do.
1642         Pass one of these values to <<bfd_reloc_type_lookup>>, and it'll
1643         return a howto pointer.
1644
1645         This does mean that the application must determine the correct
1646         enumerator value; you can't get a howto pointer from a random set
1647         of attributes.
1648
1649 SENUM
1650    bfd_reloc_code_real
1651
1652 ENUM
1653   BFD_RELOC_64
1654 ENUMX
1655   BFD_RELOC_32
1656 ENUMX
1657   BFD_RELOC_26
1658 ENUMX
1659   BFD_RELOC_24
1660 ENUMX
1661   BFD_RELOC_16
1662 ENUMX
1663   BFD_RELOC_14
1664 ENUMX
1665   BFD_RELOC_8
1666 ENUMDOC
1667   Basic absolute relocations of N bits.
1668
1669 ENUM
1670   BFD_RELOC_64_PCREL
1671 ENUMX
1672   BFD_RELOC_32_PCREL
1673 ENUMX
1674   BFD_RELOC_24_PCREL
1675 ENUMX
1676   BFD_RELOC_16_PCREL
1677 ENUMX
1678   BFD_RELOC_12_PCREL
1679 ENUMX
1680   BFD_RELOC_8_PCREL
1681 ENUMDOC
1682   PC-relative relocations.  Sometimes these are relative to the address
1683 of the relocation itself; sometimes they are relative to the start of
1684 the section containing the relocation.  It depends on the specific target.
1685
1686 The 24-bit relocation is used in some Intel 960 configurations.
1687
1688 ENUM
1689   BFD_RELOC_32_SECREL
1690 ENUMDOC
1691   Section relative relocations.  Some targets need this for DWARF2.
1692
1693 ENUM
1694   BFD_RELOC_32_GOT_PCREL
1695 ENUMX
1696   BFD_RELOC_16_GOT_PCREL
1697 ENUMX
1698   BFD_RELOC_8_GOT_PCREL
1699 ENUMX
1700   BFD_RELOC_32_GOTOFF
1701 ENUMX
1702   BFD_RELOC_16_GOTOFF
1703 ENUMX
1704   BFD_RELOC_LO16_GOTOFF
1705 ENUMX
1706   BFD_RELOC_HI16_GOTOFF
1707 ENUMX
1708   BFD_RELOC_HI16_S_GOTOFF
1709 ENUMX
1710   BFD_RELOC_8_GOTOFF
1711 ENUMX
1712   BFD_RELOC_64_PLT_PCREL
1713 ENUMX
1714   BFD_RELOC_32_PLT_PCREL
1715 ENUMX
1716   BFD_RELOC_24_PLT_PCREL
1717 ENUMX
1718   BFD_RELOC_16_PLT_PCREL
1719 ENUMX
1720   BFD_RELOC_8_PLT_PCREL
1721 ENUMX
1722   BFD_RELOC_64_PLTOFF
1723 ENUMX
1724   BFD_RELOC_32_PLTOFF
1725 ENUMX
1726   BFD_RELOC_16_PLTOFF
1727 ENUMX
1728   BFD_RELOC_LO16_PLTOFF
1729 ENUMX
1730   BFD_RELOC_HI16_PLTOFF
1731 ENUMX
1732   BFD_RELOC_HI16_S_PLTOFF
1733 ENUMX
1734   BFD_RELOC_8_PLTOFF
1735 ENUMDOC
1736   For ELF.
1737
1738 ENUM
1739   BFD_RELOC_68K_GLOB_DAT
1740 ENUMX
1741   BFD_RELOC_68K_JMP_SLOT
1742 ENUMX
1743   BFD_RELOC_68K_RELATIVE
1744 ENUMX
1745   BFD_RELOC_68K_TLS_GD32
1746 ENUMX
1747   BFD_RELOC_68K_TLS_GD16
1748 ENUMX
1749   BFD_RELOC_68K_TLS_GD8
1750 ENUMX
1751   BFD_RELOC_68K_TLS_LDM32
1752 ENUMX
1753   BFD_RELOC_68K_TLS_LDM16
1754 ENUMX
1755   BFD_RELOC_68K_TLS_LDM8
1756 ENUMX
1757   BFD_RELOC_68K_TLS_LDO32
1758 ENUMX
1759   BFD_RELOC_68K_TLS_LDO16
1760 ENUMX
1761   BFD_RELOC_68K_TLS_LDO8
1762 ENUMX
1763   BFD_RELOC_68K_TLS_IE32
1764 ENUMX
1765   BFD_RELOC_68K_TLS_IE16
1766 ENUMX
1767   BFD_RELOC_68K_TLS_IE8
1768 ENUMX
1769   BFD_RELOC_68K_TLS_LE32
1770 ENUMX
1771   BFD_RELOC_68K_TLS_LE16
1772 ENUMX
1773   BFD_RELOC_68K_TLS_LE8
1774 ENUMDOC
1775   Relocations used by 68K ELF.
1776
1777 ENUM
1778   BFD_RELOC_32_BASEREL
1779 ENUMX
1780   BFD_RELOC_16_BASEREL
1781 ENUMX
1782   BFD_RELOC_LO16_BASEREL
1783 ENUMX
1784   BFD_RELOC_HI16_BASEREL
1785 ENUMX
1786   BFD_RELOC_HI16_S_BASEREL
1787 ENUMX
1788   BFD_RELOC_8_BASEREL
1789 ENUMX
1790   BFD_RELOC_RVA
1791 ENUMDOC
1792   Linkage-table relative.
1793
1794 ENUM
1795   BFD_RELOC_8_FFnn
1796 ENUMDOC
1797   Absolute 8-bit relocation, but used to form an address like 0xFFnn.
1798
1799 ENUM
1800   BFD_RELOC_32_PCREL_S2
1801 ENUMX
1802   BFD_RELOC_16_PCREL_S2
1803 ENUMX
1804   BFD_RELOC_23_PCREL_S2
1805 ENUMDOC
1806   These PC-relative relocations are stored as word displacements --
1807 i.e., byte displacements shifted right two bits.  The 30-bit word
1808 displacement (<<32_PCREL_S2>> -- 32 bits, shifted 2) is used on the
1809 SPARC.  (SPARC tools generally refer to this as <<WDISP30>>.)  The
1810 signed 16-bit displacement is used on the MIPS, and the 23-bit
1811 displacement is used on the Alpha.
1812
1813 ENUM
1814   BFD_RELOC_HI22
1815 ENUMX
1816   BFD_RELOC_LO10
1817 ENUMDOC
1818   High 22 bits and low 10 bits of 32-bit value, placed into lower bits of
1819 the target word.  These are used on the SPARC.
1820
1821 ENUM
1822   BFD_RELOC_GPREL16
1823 ENUMX
1824   BFD_RELOC_GPREL32
1825 ENUMDOC
1826   For systems that allocate a Global Pointer register, these are
1827 displacements off that register.  These relocation types are
1828 handled specially, because the value the register will have is
1829 decided relatively late.
1830
1831 ENUM
1832   BFD_RELOC_I960_CALLJ
1833 ENUMDOC
1834   Reloc types used for i960/b.out.
1835
1836 ENUM
1837   BFD_RELOC_NONE
1838 ENUMX
1839   BFD_RELOC_SPARC_WDISP22
1840 ENUMX
1841   BFD_RELOC_SPARC22
1842 ENUMX
1843   BFD_RELOC_SPARC13
1844 ENUMX
1845   BFD_RELOC_SPARC_GOT10
1846 ENUMX
1847   BFD_RELOC_SPARC_GOT13
1848 ENUMX
1849   BFD_RELOC_SPARC_GOT22
1850 ENUMX
1851   BFD_RELOC_SPARC_PC10
1852 ENUMX
1853   BFD_RELOC_SPARC_PC22
1854 ENUMX
1855   BFD_RELOC_SPARC_WPLT30
1856 ENUMX
1857   BFD_RELOC_SPARC_COPY
1858 ENUMX
1859   BFD_RELOC_SPARC_GLOB_DAT
1860 ENUMX
1861   BFD_RELOC_SPARC_JMP_SLOT
1862 ENUMX
1863   BFD_RELOC_SPARC_RELATIVE
1864 ENUMX
1865   BFD_RELOC_SPARC_UA16
1866 ENUMX
1867   BFD_RELOC_SPARC_UA32
1868 ENUMX
1869   BFD_RELOC_SPARC_UA64
1870 ENUMX
1871   BFD_RELOC_SPARC_GOTDATA_HIX22
1872 ENUMX
1873   BFD_RELOC_SPARC_GOTDATA_LOX10
1874 ENUMX
1875   BFD_RELOC_SPARC_GOTDATA_OP_HIX22
1876 ENUMX
1877   BFD_RELOC_SPARC_GOTDATA_OP_LOX10
1878 ENUMX
1879   BFD_RELOC_SPARC_GOTDATA_OP
1880 ENUMX
1881   BFD_RELOC_SPARC_JMP_IREL
1882 ENUMX
1883   BFD_RELOC_SPARC_IRELATIVE
1884 ENUMDOC
1885   SPARC ELF relocations.  There is probably some overlap with other
1886   relocation types already defined.
1887
1888 ENUM
1889   BFD_RELOC_SPARC_BASE13
1890 ENUMX
1891   BFD_RELOC_SPARC_BASE22
1892 ENUMDOC
1893   I think these are specific to SPARC a.out (e.g., Sun 4).
1894
1895 ENUMEQ
1896   BFD_RELOC_SPARC_64
1897   BFD_RELOC_64
1898 ENUMX
1899   BFD_RELOC_SPARC_10
1900 ENUMX
1901   BFD_RELOC_SPARC_11
1902 ENUMX
1903   BFD_RELOC_SPARC_OLO10
1904 ENUMX
1905   BFD_RELOC_SPARC_HH22
1906 ENUMX
1907   BFD_RELOC_SPARC_HM10
1908 ENUMX
1909   BFD_RELOC_SPARC_LM22
1910 ENUMX
1911   BFD_RELOC_SPARC_PC_HH22
1912 ENUMX
1913   BFD_RELOC_SPARC_PC_HM10
1914 ENUMX
1915   BFD_RELOC_SPARC_PC_LM22
1916 ENUMX
1917   BFD_RELOC_SPARC_WDISP16
1918 ENUMX
1919   BFD_RELOC_SPARC_WDISP19
1920 ENUMX
1921   BFD_RELOC_SPARC_7
1922 ENUMX
1923   BFD_RELOC_SPARC_6
1924 ENUMX
1925   BFD_RELOC_SPARC_5
1926 ENUMEQX
1927   BFD_RELOC_SPARC_DISP64
1928   BFD_RELOC_64_PCREL
1929 ENUMX
1930   BFD_RELOC_SPARC_PLT32
1931 ENUMX
1932   BFD_RELOC_SPARC_PLT64
1933 ENUMX
1934   BFD_RELOC_SPARC_HIX22
1935 ENUMX
1936   BFD_RELOC_SPARC_LOX10
1937 ENUMX
1938   BFD_RELOC_SPARC_H44
1939 ENUMX
1940   BFD_RELOC_SPARC_M44
1941 ENUMX
1942   BFD_RELOC_SPARC_L44
1943 ENUMX
1944   BFD_RELOC_SPARC_REGISTER
1945 ENUMDOC
1946   SPARC64 relocations
1947
1948 ENUM
1949   BFD_RELOC_SPARC_REV32
1950 ENUMDOC
1951   SPARC little endian relocation
1952 ENUM
1953   BFD_RELOC_SPARC_TLS_GD_HI22
1954 ENUMX
1955   BFD_RELOC_SPARC_TLS_GD_LO10
1956 ENUMX
1957   BFD_RELOC_SPARC_TLS_GD_ADD
1958 ENUMX
1959   BFD_RELOC_SPARC_TLS_GD_CALL
1960 ENUMX
1961   BFD_RELOC_SPARC_TLS_LDM_HI22
1962 ENUMX
1963   BFD_RELOC_SPARC_TLS_LDM_LO10
1964 ENUMX
1965   BFD_RELOC_SPARC_TLS_LDM_ADD
1966 ENUMX
1967   BFD_RELOC_SPARC_TLS_LDM_CALL
1968 ENUMX
1969   BFD_RELOC_SPARC_TLS_LDO_HIX22
1970 ENUMX
1971   BFD_RELOC_SPARC_TLS_LDO_LOX10
1972 ENUMX
1973   BFD_RELOC_SPARC_TLS_LDO_ADD
1974 ENUMX
1975   BFD_RELOC_SPARC_TLS_IE_HI22
1976 ENUMX
1977   BFD_RELOC_SPARC_TLS_IE_LO10
1978 ENUMX
1979   BFD_RELOC_SPARC_TLS_IE_LD
1980 ENUMX
1981   BFD_RELOC_SPARC_TLS_IE_LDX
1982 ENUMX
1983   BFD_RELOC_SPARC_TLS_IE_ADD
1984 ENUMX
1985   BFD_RELOC_SPARC_TLS_LE_HIX22
1986 ENUMX
1987   BFD_RELOC_SPARC_TLS_LE_LOX10
1988 ENUMX
1989   BFD_RELOC_SPARC_TLS_DTPMOD32
1990 ENUMX
1991   BFD_RELOC_SPARC_TLS_DTPMOD64
1992 ENUMX
1993   BFD_RELOC_SPARC_TLS_DTPOFF32
1994 ENUMX
1995   BFD_RELOC_SPARC_TLS_DTPOFF64
1996 ENUMX
1997   BFD_RELOC_SPARC_TLS_TPOFF32
1998 ENUMX
1999   BFD_RELOC_SPARC_TLS_TPOFF64
2000 ENUMDOC
2001   SPARC TLS relocations
2002
2003 ENUM
2004   BFD_RELOC_SPU_IMM7
2005 ENUMX
2006   BFD_RELOC_SPU_IMM8
2007 ENUMX
2008   BFD_RELOC_SPU_IMM10
2009 ENUMX
2010   BFD_RELOC_SPU_IMM10W
2011 ENUMX
2012   BFD_RELOC_SPU_IMM16
2013 ENUMX
2014   BFD_RELOC_SPU_IMM16W
2015 ENUMX
2016   BFD_RELOC_SPU_IMM18
2017 ENUMX
2018   BFD_RELOC_SPU_PCREL9a
2019 ENUMX
2020   BFD_RELOC_SPU_PCREL9b
2021 ENUMX
2022   BFD_RELOC_SPU_PCREL16
2023 ENUMX
2024   BFD_RELOC_SPU_LO16
2025 ENUMX
2026   BFD_RELOC_SPU_HI16
2027 ENUMX
2028   BFD_RELOC_SPU_PPU32
2029 ENUMX
2030   BFD_RELOC_SPU_PPU64
2031 ENUMX
2032   BFD_RELOC_SPU_ADD_PIC
2033 ENUMDOC
2034   SPU Relocations.
2035
2036 ENUM
2037   BFD_RELOC_ALPHA_GPDISP_HI16
2038 ENUMDOC
2039   Alpha ECOFF and ELF relocations.  Some of these treat the symbol or
2040      "addend" in some special way.
2041   For GPDISP_HI16 ("gpdisp") relocations, the symbol is ignored when
2042      writing; when reading, it will be the absolute section symbol.  The
2043      addend is the displacement in bytes of the "lda" instruction from
2044      the "ldah" instruction (which is at the address of this reloc).
2045 ENUM
2046   BFD_RELOC_ALPHA_GPDISP_LO16
2047 ENUMDOC
2048   For GPDISP_LO16 ("ignore") relocations, the symbol is handled as
2049      with GPDISP_HI16 relocs.  The addend is ignored when writing the
2050      relocations out, and is filled in with the file's GP value on
2051      reading, for convenience.
2052
2053 ENUM
2054   BFD_RELOC_ALPHA_GPDISP
2055 ENUMDOC
2056   The ELF GPDISP relocation is exactly the same as the GPDISP_HI16
2057      relocation except that there is no accompanying GPDISP_LO16
2058      relocation.
2059
2060 ENUM
2061   BFD_RELOC_ALPHA_LITERAL
2062 ENUMX
2063   BFD_RELOC_ALPHA_ELF_LITERAL
2064 ENUMX
2065   BFD_RELOC_ALPHA_LITUSE
2066 ENUMDOC
2067   The Alpha LITERAL/LITUSE relocs are produced by a symbol reference;
2068      the assembler turns it into a LDQ instruction to load the address of
2069      the symbol, and then fills in a register in the real instruction.
2070
2071      The LITERAL reloc, at the LDQ instruction, refers to the .lita
2072      section symbol.  The addend is ignored when writing, but is filled
2073      in with the file's GP value on reading, for convenience, as with the
2074      GPDISP_LO16 reloc.
2075
2076      The ELF_LITERAL reloc is somewhere between 16_GOTOFF and GPDISP_LO16.
2077      It should refer to the symbol to be referenced, as with 16_GOTOFF,
2078      but it generates output not based on the position within the .got
2079      section, but relative to the GP value chosen for the file during the
2080      final link stage.
2081
2082      The LITUSE reloc, on the instruction using the loaded address, gives
2083      information to the linker that it might be able to use to optimize
2084      away some literal section references.  The symbol is ignored (read
2085      as the absolute section symbol), and the "addend" indicates the type
2086      of instruction using the register:
2087               1 - "memory" fmt insn
2088               2 - byte-manipulation (byte offset reg)
2089               3 - jsr (target of branch)
2090
2091 ENUM
2092   BFD_RELOC_ALPHA_HINT
2093 ENUMDOC
2094   The HINT relocation indicates a value that should be filled into the
2095      "hint" field of a jmp/jsr/ret instruction, for possible branch-
2096      prediction logic which may be provided on some processors.
2097
2098 ENUM
2099   BFD_RELOC_ALPHA_LINKAGE
2100 ENUMDOC
2101   The LINKAGE relocation outputs a linkage pair in the object file,
2102      which is filled by the linker.
2103
2104 ENUM
2105   BFD_RELOC_ALPHA_CODEADDR
2106 ENUMDOC
2107   The CODEADDR relocation outputs a STO_CA in the object file,
2108      which is filled by the linker.
2109
2110 ENUM
2111   BFD_RELOC_ALPHA_GPREL_HI16
2112 ENUMX
2113   BFD_RELOC_ALPHA_GPREL_LO16
2114 ENUMDOC
2115   The GPREL_HI/LO relocations together form a 32-bit offset from the
2116      GP register.
2117
2118 ENUM
2119   BFD_RELOC_ALPHA_BRSGP
2120 ENUMDOC
2121   Like BFD_RELOC_23_PCREL_S2, except that the source and target must
2122   share a common GP, and the target address is adjusted for
2123   STO_ALPHA_STD_GPLOAD.
2124
2125 ENUM
2126   BFD_RELOC_ALPHA_NOP
2127 ENUMDOC
2128   The NOP relocation outputs a NOP if the longword displacement
2129      between two procedure entry points is < 2^21.
2130
2131 ENUM
2132   BFD_RELOC_ALPHA_BSR
2133 ENUMDOC
2134   The BSR relocation outputs a BSR if the longword displacement
2135      between two procedure entry points is < 2^21.
2136
2137 ENUM
2138   BFD_RELOC_ALPHA_LDA
2139 ENUMDOC
2140   The LDA relocation outputs a LDA if the longword displacement
2141      between two procedure entry points is < 2^16.
2142
2143 ENUM
2144   BFD_RELOC_ALPHA_BOH
2145 ENUMDOC
2146   The BOH relocation outputs a BSR if the longword displacement
2147      between two procedure entry points is < 2^21, or else a hint.
2148
2149 ENUM
2150   BFD_RELOC_ALPHA_TLSGD
2151 ENUMX
2152   BFD_RELOC_ALPHA_TLSLDM
2153 ENUMX
2154   BFD_RELOC_ALPHA_DTPMOD64
2155 ENUMX
2156   BFD_RELOC_ALPHA_GOTDTPREL16
2157 ENUMX
2158   BFD_RELOC_ALPHA_DTPREL64
2159 ENUMX
2160   BFD_RELOC_ALPHA_DTPREL_HI16
2161 ENUMX
2162   BFD_RELOC_ALPHA_DTPREL_LO16
2163 ENUMX
2164   BFD_RELOC_ALPHA_DTPREL16
2165 ENUMX
2166   BFD_RELOC_ALPHA_GOTTPREL16
2167 ENUMX
2168   BFD_RELOC_ALPHA_TPREL64
2169 ENUMX
2170   BFD_RELOC_ALPHA_TPREL_HI16
2171 ENUMX
2172   BFD_RELOC_ALPHA_TPREL_LO16
2173 ENUMX
2174   BFD_RELOC_ALPHA_TPREL16
2175 ENUMDOC
2176   Alpha thread-local storage relocations.
2177
2178 ENUM
2179   BFD_RELOC_MIPS_JMP
2180 ENUMDOC
2181   Bits 27..2 of the relocation address shifted right 2 bits;
2182      simple reloc otherwise.
2183
2184 ENUM
2185   BFD_RELOC_MIPS16_JMP
2186 ENUMDOC
2187   The MIPS16 jump instruction.
2188
2189 ENUM
2190   BFD_RELOC_MIPS16_GPREL
2191 ENUMDOC
2192   MIPS16 GP relative reloc.
2193
2194 ENUM
2195   BFD_RELOC_HI16
2196 ENUMDOC
2197   High 16 bits of 32-bit value; simple reloc.
2198 ENUM
2199   BFD_RELOC_HI16_S
2200 ENUMDOC
2201   High 16 bits of 32-bit value but the low 16 bits will be sign
2202      extended and added to form the final result.  If the low 16
2203      bits form a negative number, we need to add one to the high value
2204      to compensate for the borrow when the low bits are added.
2205 ENUM
2206   BFD_RELOC_LO16
2207 ENUMDOC
2208   Low 16 bits.
2209
2210 ENUM
2211   BFD_RELOC_HI16_PCREL
2212 ENUMDOC
2213   High 16 bits of 32-bit pc-relative value
2214 ENUM
2215   BFD_RELOC_HI16_S_PCREL
2216 ENUMDOC
2217   High 16 bits of 32-bit pc-relative value, adjusted
2218 ENUM
2219   BFD_RELOC_LO16_PCREL
2220 ENUMDOC
2221   Low 16 bits of pc-relative value
2222
2223 ENUM
2224   BFD_RELOC_MIPS16_GOT16
2225 ENUMX
2226   BFD_RELOC_MIPS16_CALL16
2227 ENUMDOC
2228   Equivalent of BFD_RELOC_MIPS_*, but with the MIPS16 layout of
2229      16-bit immediate fields
2230 ENUM
2231   BFD_RELOC_MIPS16_HI16
2232 ENUMDOC
2233   MIPS16 high 16 bits of 32-bit value.
2234 ENUM
2235   BFD_RELOC_MIPS16_HI16_S
2236 ENUMDOC
2237   MIPS16 high 16 bits of 32-bit value but the low 16 bits will be sign
2238      extended and added to form the final result.  If the low 16
2239      bits form a negative number, we need to add one to the high value
2240      to compensate for the borrow when the low bits are added.
2241 ENUM
2242   BFD_RELOC_MIPS16_LO16
2243 ENUMDOC
2244   MIPS16 low 16 bits.
2245
2246 ENUM
2247   BFD_RELOC_MIPS_LITERAL
2248 ENUMDOC
2249   Relocation against a MIPS literal section.
2250
2251 ENUM
2252   BFD_RELOC_MIPS_GOT16
2253 ENUMX
2254   BFD_RELOC_MIPS_CALL16
2255 ENUMX
2256   BFD_RELOC_MIPS_GOT_HI16
2257 ENUMX
2258   BFD_RELOC_MIPS_GOT_LO16
2259 ENUMX
2260   BFD_RELOC_MIPS_CALL_HI16
2261 ENUMX
2262   BFD_RELOC_MIPS_CALL_LO16
2263 ENUMX
2264   BFD_RELOC_MIPS_SUB
2265 ENUMX
2266   BFD_RELOC_MIPS_GOT_PAGE
2267 ENUMX
2268   BFD_RELOC_MIPS_GOT_OFST
2269 ENUMX
2270   BFD_RELOC_MIPS_GOT_DISP
2271 ENUMX
2272   BFD_RELOC_MIPS_SHIFT5
2273 ENUMX
2274   BFD_RELOC_MIPS_SHIFT6
2275 ENUMX
2276   BFD_RELOC_MIPS_INSERT_A
2277 ENUMX
2278   BFD_RELOC_MIPS_INSERT_B
2279 ENUMX
2280   BFD_RELOC_MIPS_DELETE
2281 ENUMX
2282   BFD_RELOC_MIPS_HIGHEST
2283 ENUMX
2284   BFD_RELOC_MIPS_HIGHER
2285 ENUMX
2286   BFD_RELOC_MIPS_SCN_DISP
2287 ENUMX
2288   BFD_RELOC_MIPS_REL16
2289 ENUMX
2290   BFD_RELOC_MIPS_RELGOT
2291 ENUMX
2292   BFD_RELOC_MIPS_JALR
2293 ENUMX
2294   BFD_RELOC_MIPS_TLS_DTPMOD32
2295 ENUMX
2296   BFD_RELOC_MIPS_TLS_DTPREL32
2297 ENUMX
2298   BFD_RELOC_MIPS_TLS_DTPMOD64
2299 ENUMX
2300   BFD_RELOC_MIPS_TLS_DTPREL64
2301 ENUMX
2302   BFD_RELOC_MIPS_TLS_GD
2303 ENUMX
2304   BFD_RELOC_MIPS_TLS_LDM
2305 ENUMX
2306   BFD_RELOC_MIPS_TLS_DTPREL_HI16
2307 ENUMX
2308   BFD_RELOC_MIPS_TLS_DTPREL_LO16
2309 ENUMX
2310   BFD_RELOC_MIPS_TLS_GOTTPREL
2311 ENUMX
2312   BFD_RELOC_MIPS_TLS_TPREL32
2313 ENUMX
2314   BFD_RELOC_MIPS_TLS_TPREL64
2315 ENUMX
2316   BFD_RELOC_MIPS_TLS_TPREL_HI16
2317 ENUMX
2318   BFD_RELOC_MIPS_TLS_TPREL_LO16
2319 ENUMDOC
2320   MIPS ELF relocations.
2321 COMMENT
2322
2323 ENUM
2324   BFD_RELOC_MIPS_COPY
2325 ENUMX
2326   BFD_RELOC_MIPS_JUMP_SLOT
2327 ENUMDOC
2328   MIPS ELF relocations (VxWorks and PLT extensions).
2329 COMMENT
2330
2331 ENUM
2332   BFD_RELOC_MOXIE_10_PCREL
2333 ENUMDOC
2334   Moxie ELF relocations.
2335 COMMENT
2336
2337 ENUM
2338   BFD_RELOC_FRV_LABEL16
2339 ENUMX
2340   BFD_RELOC_FRV_LABEL24
2341 ENUMX
2342   BFD_RELOC_FRV_LO16
2343 ENUMX
2344   BFD_RELOC_FRV_HI16
2345 ENUMX
2346   BFD_RELOC_FRV_GPREL12
2347 ENUMX
2348   BFD_RELOC_FRV_GPRELU12
2349 ENUMX
2350   BFD_RELOC_FRV_GPREL32
2351 ENUMX
2352   BFD_RELOC_FRV_GPRELHI
2353 ENUMX
2354   BFD_RELOC_FRV_GPRELLO
2355 ENUMX
2356   BFD_RELOC_FRV_GOT12
2357 ENUMX
2358   BFD_RELOC_FRV_GOTHI
2359 ENUMX
2360   BFD_RELOC_FRV_GOTLO
2361 ENUMX
2362   BFD_RELOC_FRV_FUNCDESC
2363 ENUMX
2364   BFD_RELOC_FRV_FUNCDESC_GOT12
2365 ENUMX
2366   BFD_RELOC_FRV_FUNCDESC_GOTHI
2367 ENUMX
2368   BFD_RELOC_FRV_FUNCDESC_GOTLO
2369 ENUMX
2370   BFD_RELOC_FRV_FUNCDESC_VALUE
2371 ENUMX
2372   BFD_RELOC_FRV_FUNCDESC_GOTOFF12
2373 ENUMX
2374   BFD_RELOC_FRV_FUNCDESC_GOTOFFHI
2375 ENUMX
2376   BFD_RELOC_FRV_FUNCDESC_GOTOFFLO
2377 ENUMX
2378   BFD_RELOC_FRV_GOTOFF12
2379 ENUMX
2380   BFD_RELOC_FRV_GOTOFFHI
2381 ENUMX
2382   BFD_RELOC_FRV_GOTOFFLO
2383 ENUMX
2384   BFD_RELOC_FRV_GETTLSOFF
2385 ENUMX
2386   BFD_RELOC_FRV_TLSDESC_VALUE
2387 ENUMX
2388   BFD_RELOC_FRV_GOTTLSDESC12
2389 ENUMX
2390   BFD_RELOC_FRV_GOTTLSDESCHI
2391 ENUMX
2392   BFD_RELOC_FRV_GOTTLSDESCLO
2393 ENUMX
2394   BFD_RELOC_FRV_TLSMOFF12
2395 ENUMX
2396   BFD_RELOC_FRV_TLSMOFFHI
2397 ENUMX
2398   BFD_RELOC_FRV_TLSMOFFLO
2399 ENUMX
2400   BFD_RELOC_FRV_GOTTLSOFF12
2401 ENUMX
2402   BFD_RELOC_FRV_GOTTLSOFFHI
2403 ENUMX
2404   BFD_RELOC_FRV_GOTTLSOFFLO
2405 ENUMX
2406   BFD_RELOC_FRV_TLSOFF
2407 ENUMX
2408   BFD_RELOC_FRV_TLSDESC_RELAX
2409 ENUMX
2410   BFD_RELOC_FRV_GETTLSOFF_RELAX
2411 ENUMX
2412   BFD_RELOC_FRV_TLSOFF_RELAX
2413 ENUMX
2414   BFD_RELOC_FRV_TLSMOFF
2415 ENUMDOC
2416   Fujitsu Frv Relocations.
2417 COMMENT
2418
2419 ENUM
2420   BFD_RELOC_MN10300_GOTOFF24
2421 ENUMDOC
2422   This is a 24bit GOT-relative reloc for the mn10300.
2423 ENUM
2424   BFD_RELOC_MN10300_GOT32
2425 ENUMDOC
2426   This is a 32bit GOT-relative reloc for the mn10300, offset by two bytes
2427   in the instruction.
2428 ENUM
2429   BFD_RELOC_MN10300_GOT24
2430 ENUMDOC
2431   This is a 24bit GOT-relative reloc for the mn10300, offset by two bytes
2432   in the instruction.
2433 ENUM
2434   BFD_RELOC_MN10300_GOT16
2435 ENUMDOC
2436   This is a 16bit GOT-relative reloc for the mn10300, offset by two bytes
2437   in the instruction.
2438 ENUM
2439   BFD_RELOC_MN10300_COPY
2440 ENUMDOC
2441   Copy symbol at runtime.
2442 ENUM
2443   BFD_RELOC_MN10300_GLOB_DAT
2444 ENUMDOC
2445   Create GOT entry.
2446 ENUM
2447   BFD_RELOC_MN10300_JMP_SLOT
2448 ENUMDOC
2449   Create PLT entry.
2450 ENUM
2451   BFD_RELOC_MN10300_RELATIVE
2452 ENUMDOC
2453   Adjust by program base.
2454 ENUM
2455   BFD_RELOC_MN10300_SYM_DIFF
2456 ENUMDOC
2457   Together with another reloc targeted at the same location,
2458   allows for a value that is the difference of two symbols
2459   in the same section.
2460 ENUM
2461   BFD_RELOC_MN10300_ALIGN
2462 ENUMDOC
2463   The addend of this reloc is an alignment power that must
2464   be honoured at the offset's location, regardless of linker
2465   relaxation.
2466 COMMENT
2467
2468 ENUM
2469   BFD_RELOC_386_GOT32
2470 ENUMX
2471   BFD_RELOC_386_PLT32
2472 ENUMX
2473   BFD_RELOC_386_COPY
2474 ENUMX
2475   BFD_RELOC_386_GLOB_DAT
2476 ENUMX
2477   BFD_RELOC_386_JUMP_SLOT
2478 ENUMX
2479   BFD_RELOC_386_RELATIVE
2480 ENUMX
2481   BFD_RELOC_386_GOTOFF
2482 ENUMX
2483   BFD_RELOC_386_GOTPC
2484 ENUMX
2485   BFD_RELOC_386_TLS_TPOFF
2486 ENUMX
2487   BFD_RELOC_386_TLS_IE
2488 ENUMX
2489   BFD_RELOC_386_TLS_GOTIE
2490 ENUMX
2491   BFD_RELOC_386_TLS_LE
2492 ENUMX
2493   BFD_RELOC_386_TLS_GD
2494 ENUMX
2495   BFD_RELOC_386_TLS_LDM
2496 ENUMX
2497   BFD_RELOC_386_TLS_LDO_32
2498 ENUMX
2499   BFD_RELOC_386_TLS_IE_32
2500 ENUMX
2501   BFD_RELOC_386_TLS_LE_32
2502 ENUMX
2503   BFD_RELOC_386_TLS_DTPMOD32
2504 ENUMX
2505   BFD_RELOC_386_TLS_DTPOFF32
2506 ENUMX
2507   BFD_RELOC_386_TLS_TPOFF32
2508 ENUMX
2509   BFD_RELOC_386_TLS_GOTDESC
2510 ENUMX
2511   BFD_RELOC_386_TLS_DESC_CALL
2512 ENUMX
2513   BFD_RELOC_386_TLS_DESC
2514 ENUMX
2515   BFD_RELOC_386_IRELATIVE
2516 ENUMDOC
2517   i386/elf relocations
2518
2519 ENUM
2520   BFD_RELOC_X86_64_GOT32
2521 ENUMX
2522   BFD_RELOC_X86_64_PLT32
2523 ENUMX
2524   BFD_RELOC_X86_64_COPY
2525 ENUMX
2526   BFD_RELOC_X86_64_GLOB_DAT
2527 ENUMX
2528   BFD_RELOC_X86_64_JUMP_SLOT
2529 ENUMX
2530   BFD_RELOC_X86_64_RELATIVE
2531 ENUMX
2532   BFD_RELOC_X86_64_GOTPCREL
2533 ENUMX
2534   BFD_RELOC_X86_64_32S
2535 ENUMX
2536   BFD_RELOC_X86_64_DTPMOD64
2537 ENUMX
2538   BFD_RELOC_X86_64_DTPOFF64
2539 ENUMX
2540   BFD_RELOC_X86_64_TPOFF64
2541 ENUMX
2542   BFD_RELOC_X86_64_TLSGD
2543 ENUMX
2544   BFD_RELOC_X86_64_TLSLD
2545 ENUMX
2546   BFD_RELOC_X86_64_DTPOFF32
2547 ENUMX
2548   BFD_RELOC_X86_64_GOTTPOFF
2549 ENUMX
2550   BFD_RELOC_X86_64_TPOFF32
2551 ENUMX
2552   BFD_RELOC_X86_64_GOTOFF64
2553 ENUMX
2554   BFD_RELOC_X86_64_GOTPC32
2555 ENUMX
2556   BFD_RELOC_X86_64_GOT64
2557 ENUMX
2558   BFD_RELOC_X86_64_GOTPCREL64
2559 ENUMX
2560   BFD_RELOC_X86_64_GOTPC64
2561 ENUMX
2562   BFD_RELOC_X86_64_GOTPLT64
2563 ENUMX
2564   BFD_RELOC_X86_64_PLTOFF64
2565 ENUMX
2566   BFD_RELOC_X86_64_GOTPC32_TLSDESC
2567 ENUMX
2568   BFD_RELOC_X86_64_TLSDESC_CALL
2569 ENUMX
2570   BFD_RELOC_X86_64_TLSDESC
2571 ENUMX
2572   BFD_RELOC_X86_64_IRELATIVE
2573 ENUMDOC
2574   x86-64/elf relocations
2575
2576 ENUM
2577   BFD_RELOC_NS32K_IMM_8
2578 ENUMX
2579   BFD_RELOC_NS32K_IMM_16
2580 ENUMX
2581   BFD_RELOC_NS32K_IMM_32
2582 ENUMX
2583   BFD_RELOC_NS32K_IMM_8_PCREL
2584 ENUMX
2585   BFD_RELOC_NS32K_IMM_16_PCREL
2586 ENUMX
2587   BFD_RELOC_NS32K_IMM_32_PCREL
2588 ENUMX
2589   BFD_RELOC_NS32K_DISP_8
2590 ENUMX
2591   BFD_RELOC_NS32K_DISP_16
2592 ENUMX
2593   BFD_RELOC_NS32K_DISP_32
2594 ENUMX
2595   BFD_RELOC_NS32K_DISP_8_PCREL
2596 ENUMX
2597   BFD_RELOC_NS32K_DISP_16_PCREL
2598 ENUMX
2599   BFD_RELOC_NS32K_DISP_32_PCREL
2600 ENUMDOC
2601   ns32k relocations
2602
2603 ENUM
2604   BFD_RELOC_PDP11_DISP_8_PCREL
2605 ENUMX
2606   BFD_RELOC_PDP11_DISP_6_PCREL
2607 ENUMDOC
2608   PDP11 relocations
2609
2610 ENUM
2611   BFD_RELOC_PJ_CODE_HI16
2612 ENUMX
2613   BFD_RELOC_PJ_CODE_LO16
2614 ENUMX
2615   BFD_RELOC_PJ_CODE_DIR16
2616 ENUMX
2617   BFD_RELOC_PJ_CODE_DIR32
2618 ENUMX
2619   BFD_RELOC_PJ_CODE_REL16
2620 ENUMX
2621   BFD_RELOC_PJ_CODE_REL32
2622 ENUMDOC
2623   Picojava relocs.  Not all of these appear in object files.
2624
2625 ENUM
2626   BFD_RELOC_PPC_B26
2627 ENUMX
2628   BFD_RELOC_PPC_BA26
2629 ENUMX
2630   BFD_RELOC_PPC_TOC16
2631 ENUMX
2632   BFD_RELOC_PPC_B16
2633 ENUMX
2634   BFD_RELOC_PPC_B16_BRTAKEN
2635 ENUMX
2636   BFD_RELOC_PPC_B16_BRNTAKEN
2637 ENUMX
2638   BFD_RELOC_PPC_BA16
2639 ENUMX
2640   BFD_RELOC_PPC_BA16_BRTAKEN
2641 ENUMX
2642   BFD_RELOC_PPC_BA16_BRNTAKEN
2643 ENUMX
2644   BFD_RELOC_PPC_COPY
2645 ENUMX
2646   BFD_RELOC_PPC_GLOB_DAT
2647 ENUMX
2648   BFD_RELOC_PPC_JMP_SLOT
2649 ENUMX
2650   BFD_RELOC_PPC_RELATIVE
2651 ENUMX
2652   BFD_RELOC_PPC_LOCAL24PC
2653 ENUMX
2654   BFD_RELOC_PPC_EMB_NADDR32
2655 ENUMX
2656   BFD_RELOC_PPC_EMB_NADDR16
2657 ENUMX
2658   BFD_RELOC_PPC_EMB_NADDR16_LO
2659 ENUMX
2660   BFD_RELOC_PPC_EMB_NADDR16_HI
2661 ENUMX
2662   BFD_RELOC_PPC_EMB_NADDR16_HA
2663 ENUMX
2664   BFD_RELOC_PPC_EMB_SDAI16
2665 ENUMX
2666   BFD_RELOC_PPC_EMB_SDA2I16
2667 ENUMX
2668   BFD_RELOC_PPC_EMB_SDA2REL
2669 ENUMX
2670   BFD_RELOC_PPC_EMB_SDA21
2671 ENUMX
2672   BFD_RELOC_PPC_EMB_MRKREF
2673 ENUMX
2674   BFD_RELOC_PPC_EMB_RELSEC16
2675 ENUMX
2676   BFD_RELOC_PPC_EMB_RELST_LO
2677 ENUMX
2678   BFD_RELOC_PPC_EMB_RELST_HI
2679 ENUMX
2680   BFD_RELOC_PPC_EMB_RELST_HA
2681 ENUMX
2682   BFD_RELOC_PPC_EMB_BIT_FLD
2683 ENUMX
2684   BFD_RELOC_PPC_EMB_RELSDA
2685 ENUMX
2686   BFD_RELOC_PPC64_HIGHER
2687 ENUMX
2688   BFD_RELOC_PPC64_HIGHER_S
2689 ENUMX
2690   BFD_RELOC_PPC64_HIGHEST
2691 ENUMX
2692   BFD_RELOC_PPC64_HIGHEST_S
2693 ENUMX
2694   BFD_RELOC_PPC64_TOC16_LO
2695 ENUMX
2696   BFD_RELOC_PPC64_TOC16_HI
2697 ENUMX
2698   BFD_RELOC_PPC64_TOC16_HA
2699 ENUMX
2700   BFD_RELOC_PPC64_TOC
2701 ENUMX
2702   BFD_RELOC_PPC64_PLTGOT16
2703 ENUMX
2704   BFD_RELOC_PPC64_PLTGOT16_LO
2705 ENUMX
2706   BFD_RELOC_PPC64_PLTGOT16_HI
2707 ENUMX
2708   BFD_RELOC_PPC64_PLTGOT16_HA
2709 ENUMX
2710   BFD_RELOC_PPC64_ADDR16_DS
2711 ENUMX
2712   BFD_RELOC_PPC64_ADDR16_LO_DS
2713 ENUMX
2714   BFD_RELOC_PPC64_GOT16_DS
2715 ENUMX
2716   BFD_RELOC_PPC64_GOT16_LO_DS
2717 ENUMX
2718   BFD_RELOC_PPC64_PLT16_LO_DS
2719 ENUMX
2720   BFD_RELOC_PPC64_SECTOFF_DS
2721 ENUMX
2722   BFD_RELOC_PPC64_SECTOFF_LO_DS
2723 ENUMX
2724   BFD_RELOC_PPC64_TOC16_DS
2725 ENUMX
2726   BFD_RELOC_PPC64_TOC16_LO_DS
2727 ENUMX
2728   BFD_RELOC_PPC64_PLTGOT16_DS
2729 ENUMX
2730   BFD_RELOC_PPC64_PLTGOT16_LO_DS
2731 ENUMDOC
2732   Power(rs6000) and PowerPC relocations.
2733
2734 ENUM
2735   BFD_RELOC_PPC_TLS
2736 ENUMX
2737   BFD_RELOC_PPC_TLSGD
2738 ENUMX
2739   BFD_RELOC_PPC_TLSLD
2740 ENUMX
2741   BFD_RELOC_PPC_DTPMOD
2742 ENUMX
2743   BFD_RELOC_PPC_TPREL16
2744 ENUMX
2745   BFD_RELOC_PPC_TPREL16_LO
2746 ENUMX
2747   BFD_RELOC_PPC_TPREL16_HI
2748 ENUMX
2749   BFD_RELOC_PPC_TPREL16_HA
2750 ENUMX
2751   BFD_RELOC_PPC_TPREL
2752 ENUMX
2753   BFD_RELOC_PPC_DTPREL16
2754 ENUMX
2755   BFD_RELOC_PPC_DTPREL16_LO
2756 ENUMX
2757   BFD_RELOC_PPC_DTPREL16_HI
2758 ENUMX
2759   BFD_RELOC_PPC_DTPREL16_HA
2760 ENUMX
2761   BFD_RELOC_PPC_DTPREL
2762 ENUMX
2763   BFD_RELOC_PPC_GOT_TLSGD16
2764 ENUMX
2765   BFD_RELOC_PPC_GOT_TLSGD16_LO
2766 ENUMX
2767   BFD_RELOC_PPC_GOT_TLSGD16_HI
2768 ENUMX
2769   BFD_RELOC_PPC_GOT_TLSGD16_HA
2770 ENUMX
2771   BFD_RELOC_PPC_GOT_TLSLD16
2772 ENUMX
2773   BFD_RELOC_PPC_GOT_TLSLD16_LO
2774 ENUMX
2775   BFD_RELOC_PPC_GOT_TLSLD16_HI
2776 ENUMX
2777   BFD_RELOC_PPC_GOT_TLSLD16_HA
2778 ENUMX
2779   BFD_RELOC_PPC_GOT_TPREL16
2780 ENUMX
2781   BFD_RELOC_PPC_GOT_TPREL16_LO
2782 ENUMX
2783   BFD_RELOC_PPC_GOT_TPREL16_HI
2784 ENUMX
2785   BFD_RELOC_PPC_GOT_TPREL16_HA
2786 ENUMX
2787   BFD_RELOC_PPC_GOT_DTPREL16
2788 ENUMX
2789   BFD_RELOC_PPC_GOT_DTPREL16_LO
2790 ENUMX
2791   BFD_RELOC_PPC_GOT_DTPREL16_HI
2792 ENUMX
2793   BFD_RELOC_PPC_GOT_DTPREL16_HA
2794 ENUMX
2795   BFD_RELOC_PPC64_TPREL16_DS
2796 ENUMX
2797   BFD_RELOC_PPC64_TPREL16_LO_DS
2798 ENUMX
2799   BFD_RELOC_PPC64_TPREL16_HIGHER
2800 ENUMX
2801   BFD_RELOC_PPC64_TPREL16_HIGHERA
2802 ENUMX
2803   BFD_RELOC_PPC64_TPREL16_HIGHEST
2804 ENUMX
2805   BFD_RELOC_PPC64_TPREL16_HIGHESTA
2806 ENUMX
2807   BFD_RELOC_PPC64_DTPREL16_DS
2808 ENUMX
2809   BFD_RELOC_PPC64_DTPREL16_LO_DS
2810 ENUMX
2811   BFD_RELOC_PPC64_DTPREL16_HIGHER
2812 ENUMX
2813   BFD_RELOC_PPC64_DTPREL16_HIGHERA
2814 ENUMX
2815   BFD_RELOC_PPC64_DTPREL16_HIGHEST
2816 ENUMX
2817   BFD_RELOC_PPC64_DTPREL16_HIGHESTA
2818 ENUMDOC
2819   PowerPC and PowerPC64 thread-local storage relocations.
2820
2821 ENUM
2822   BFD_RELOC_I370_D12
2823 ENUMDOC
2824   IBM 370/390 relocations
2825
2826 ENUM
2827   BFD_RELOC_CTOR
2828 ENUMDOC
2829   The type of reloc used to build a constructor table - at the moment
2830   probably a 32 bit wide absolute relocation, but the target can choose.
2831   It generally does map to one of the other relocation types.
2832
2833 ENUM
2834   BFD_RELOC_ARM_PCREL_BRANCH
2835 ENUMDOC
2836   ARM 26 bit pc-relative branch.  The lowest two bits must be zero and are
2837   not stored in the instruction.
2838 ENUM
2839   BFD_RELOC_ARM_PCREL_BLX
2840 ENUMDOC
2841   ARM 26 bit pc-relative branch.  The lowest bit must be zero and is
2842   not stored in the instruction.  The 2nd lowest bit comes from a 1 bit
2843   field in the instruction.
2844 ENUM
2845   BFD_RELOC_THUMB_PCREL_BLX
2846 ENUMDOC
2847   Thumb 22 bit pc-relative branch.  The lowest bit must be zero and is
2848   not stored in the instruction.  The 2nd lowest bit comes from a 1 bit
2849   field in the instruction.
2850 ENUM
2851   BFD_RELOC_ARM_PCREL_CALL
2852 ENUMDOC
2853   ARM 26-bit pc-relative branch for an unconditional BL or BLX instruction.
2854 ENUM
2855   BFD_RELOC_ARM_PCREL_JUMP
2856 ENUMDOC
2857   ARM 26-bit pc-relative branch for B or conditional BL instruction.
2858
2859 ENUM
2860   BFD_RELOC_THUMB_PCREL_BRANCH7
2861 ENUMX
2862   BFD_RELOC_THUMB_PCREL_BRANCH9
2863 ENUMX
2864   BFD_RELOC_THUMB_PCREL_BRANCH12
2865 ENUMX
2866   BFD_RELOC_THUMB_PCREL_BRANCH20
2867 ENUMX
2868   BFD_RELOC_THUMB_PCREL_BRANCH23
2869 ENUMX
2870   BFD_RELOC_THUMB_PCREL_BRANCH25
2871 ENUMDOC
2872   Thumb 7-, 9-, 12-, 20-, 23-, and 25-bit pc-relative branches.
2873   The lowest bit must be zero and is not stored in the instruction.
2874   Note that the corresponding ELF R_ARM_THM_JUMPnn constant has an
2875   "nn" one smaller in all cases.  Note further that BRANCH23
2876   corresponds to R_ARM_THM_CALL.
2877
2878 ENUM
2879   BFD_RELOC_ARM_OFFSET_IMM
2880 ENUMDOC
2881   12-bit immediate offset, used in ARM-format ldr and str instructions.
2882
2883 ENUM
2884   BFD_RELOC_ARM_THUMB_OFFSET
2885 ENUMDOC
2886   5-bit immediate offset, used in Thumb-format ldr and str instructions.
2887
2888 ENUM
2889   BFD_RELOC_ARM_TARGET1
2890 ENUMDOC
2891   Pc-relative or absolute relocation depending on target.  Used for
2892   entries in .init_array sections.
2893 ENUM
2894   BFD_RELOC_ARM_ROSEGREL32
2895 ENUMDOC
2896   Read-only segment base relative address.
2897 ENUM
2898   BFD_RELOC_ARM_SBREL32
2899 ENUMDOC
2900   Data segment base relative address.
2901 ENUM
2902   BFD_RELOC_ARM_TARGET2
2903 ENUMDOC
2904   This reloc is used for references to RTTI data from exception handling
2905   tables.  The actual definition depends on the target.  It may be a
2906   pc-relative or some form of GOT-indirect relocation.
2907 ENUM
2908   BFD_RELOC_ARM_PREL31
2909 ENUMDOC
2910   31-bit PC relative address.
2911 ENUM
2912   BFD_RELOC_ARM_MOVW
2913 ENUMX
2914   BFD_RELOC_ARM_MOVT
2915 ENUMX
2916   BFD_RELOC_ARM_MOVW_PCREL
2917 ENUMX
2918   BFD_RELOC_ARM_MOVT_PCREL
2919 ENUMX
2920   BFD_RELOC_ARM_THUMB_MOVW
2921 ENUMX
2922   BFD_RELOC_ARM_THUMB_MOVT
2923 ENUMX
2924   BFD_RELOC_ARM_THUMB_MOVW_PCREL
2925 ENUMX
2926   BFD_RELOC_ARM_THUMB_MOVT_PCREL
2927 ENUMDOC
2928   Low and High halfword relocations for MOVW and MOVT instructions.
2929
2930 ENUM
2931   BFD_RELOC_ARM_JUMP_SLOT
2932 ENUMX
2933   BFD_RELOC_ARM_GLOB_DAT
2934 ENUMX
2935   BFD_RELOC_ARM_GOT32
2936 ENUMX
2937   BFD_RELOC_ARM_PLT32
2938 ENUMX
2939   BFD_RELOC_ARM_RELATIVE
2940 ENUMX
2941   BFD_RELOC_ARM_GOTOFF
2942 ENUMX
2943   BFD_RELOC_ARM_GOTPC
2944 ENUMX
2945   BFD_RELOC_ARM_GOT_PREL
2946 ENUMDOC
2947   Relocations for setting up GOTs and PLTs for shared libraries.
2948
2949 ENUM
2950   BFD_RELOC_ARM_TLS_GD32
2951 ENUMX
2952   BFD_RELOC_ARM_TLS_LDO32
2953 ENUMX
2954   BFD_RELOC_ARM_TLS_LDM32
2955 ENUMX
2956   BFD_RELOC_ARM_TLS_DTPOFF32
2957 ENUMX
2958   BFD_RELOC_ARM_TLS_DTPMOD32
2959 ENUMX
2960   BFD_RELOC_ARM_TLS_TPOFF32
2961 ENUMX
2962   BFD_RELOC_ARM_TLS_IE32
2963 ENUMX
2964   BFD_RELOC_ARM_TLS_LE32
2965 ENUMX
2966   BFD_RELOC_ARM_TLS_GOTDESC
2967 ENUMX
2968   BFD_RELOC_ARM_TLS_CALL
2969 ENUMX
2970   BFD_RELOC_ARM_THM_TLS_CALL
2971 ENUMX
2972   BFD_RELOC_ARM_TLS_DESCSEQ
2973 ENUMX
2974   BFD_RELOC_ARM_THM_TLS_DESCSEQ
2975 ENUMX
2976   BFD_RELOC_ARM_TLS_DESC
2977 ENUMDOC
2978   ARM thread-local storage relocations.
2979
2980 ENUM
2981   BFD_RELOC_ARM_ALU_PC_G0_NC
2982 ENUMX
2983   BFD_RELOC_ARM_ALU_PC_G0
2984 ENUMX
2985   BFD_RELOC_ARM_ALU_PC_G1_NC
2986 ENUMX
2987   BFD_RELOC_ARM_ALU_PC_G1
2988 ENUMX
2989   BFD_RELOC_ARM_ALU_PC_G2
2990 ENUMX
2991   BFD_RELOC_ARM_LDR_PC_G0
2992 ENUMX
2993   BFD_RELOC_ARM_LDR_PC_G1
2994 ENUMX
2995   BFD_RELOC_ARM_LDR_PC_G2
2996 ENUMX
2997   BFD_RELOC_ARM_LDRS_PC_G0
2998 ENUMX
2999   BFD_RELOC_ARM_LDRS_PC_G1
3000 ENUMX
3001   BFD_RELOC_ARM_LDRS_PC_G2
3002 ENUMX
3003   BFD_RELOC_ARM_LDC_PC_G0
3004 ENUMX
3005   BFD_RELOC_ARM_LDC_PC_G1
3006 ENUMX
3007   BFD_RELOC_ARM_LDC_PC_G2
3008 ENUMX
3009   BFD_RELOC_ARM_ALU_SB_G0_NC
3010 ENUMX
3011   BFD_RELOC_ARM_ALU_SB_G0
3012 ENUMX
3013   BFD_RELOC_ARM_ALU_SB_G1_NC
3014 ENUMX
3015   BFD_RELOC_ARM_ALU_SB_G1
3016 ENUMX
3017   BFD_RELOC_ARM_ALU_SB_G2
3018 ENUMX
3019   BFD_RELOC_ARM_LDR_SB_G0
3020 ENUMX
3021   BFD_RELOC_ARM_LDR_SB_G1
3022 ENUMX
3023   BFD_RELOC_ARM_LDR_SB_G2
3024 ENUMX
3025   BFD_RELOC_ARM_LDRS_SB_G0
3026 ENUMX
3027   BFD_RELOC_ARM_LDRS_SB_G1
3028 ENUMX
3029   BFD_RELOC_ARM_LDRS_SB_G2
3030 ENUMX
3031   BFD_RELOC_ARM_LDC_SB_G0
3032 ENUMX
3033   BFD_RELOC_ARM_LDC_SB_G1
3034 ENUMX
3035   BFD_RELOC_ARM_LDC_SB_G2
3036 ENUMDOC
3037   ARM group relocations.
3038
3039 ENUM
3040   BFD_RELOC_ARM_V4BX
3041 ENUMDOC
3042   Annotation of BX instructions.
3043
3044 ENUM
3045   BFD_RELOC_ARM_IRELATIVE
3046 ENUMDOC
3047   ARM support for STT_GNU_IFUNC.
3048
3049 ENUM
3050   BFD_RELOC_ARM_IMMEDIATE
3051 ENUMX
3052   BFD_RELOC_ARM_ADRL_IMMEDIATE
3053 ENUMX
3054   BFD_RELOC_ARM_T32_IMMEDIATE
3055 ENUMX
3056   BFD_RELOC_ARM_T32_ADD_IMM
3057 ENUMX
3058   BFD_RELOC_ARM_T32_IMM12
3059 ENUMX
3060   BFD_RELOC_ARM_T32_ADD_PC12
3061 ENUMX
3062   BFD_RELOC_ARM_SHIFT_IMM
3063 ENUMX
3064   BFD_RELOC_ARM_SMC
3065 ENUMX
3066   BFD_RELOC_ARM_HVC
3067 ENUMX
3068   BFD_RELOC_ARM_SWI
3069 ENUMX
3070   BFD_RELOC_ARM_MULTI
3071 ENUMX
3072   BFD_RELOC_ARM_CP_OFF_IMM
3073 ENUMX
3074   BFD_RELOC_ARM_CP_OFF_IMM_S2
3075 ENUMX
3076   BFD_RELOC_ARM_T32_CP_OFF_IMM
3077 ENUMX
3078   BFD_RELOC_ARM_T32_CP_OFF_IMM_S2
3079 ENUMX
3080   BFD_RELOC_ARM_ADR_IMM
3081 ENUMX
3082   BFD_RELOC_ARM_LDR_IMM
3083 ENUMX
3084   BFD_RELOC_ARM_LITERAL
3085 ENUMX
3086   BFD_RELOC_ARM_IN_POOL
3087 ENUMX
3088   BFD_RELOC_ARM_OFFSET_IMM8
3089 ENUMX
3090   BFD_RELOC_ARM_T32_OFFSET_U8
3091 ENUMX
3092   BFD_RELOC_ARM_T32_OFFSET_IMM
3093 ENUMX
3094   BFD_RELOC_ARM_HWLITERAL
3095 ENUMX
3096   BFD_RELOC_ARM_THUMB_ADD
3097 ENUMX
3098   BFD_RELOC_ARM_THUMB_IMM
3099 ENUMX
3100   BFD_RELOC_ARM_THUMB_SHIFT
3101 ENUMDOC
3102   These relocs are only used within the ARM assembler.  They are not
3103   (at present) written to any object files.
3104
3105 ENUM
3106   BFD_RELOC_SH_PCDISP8BY2
3107 ENUMX
3108   BFD_RELOC_SH_PCDISP12BY2
3109 ENUMX
3110   BFD_RELOC_SH_IMM3
3111 ENUMX
3112   BFD_RELOC_SH_IMM3U
3113 ENUMX
3114   BFD_RELOC_SH_DISP12
3115 ENUMX
3116   BFD_RELOC_SH_DISP12BY2
3117 ENUMX
3118   BFD_RELOC_SH_DISP12BY4
3119 ENUMX
3120   BFD_RELOC_SH_DISP12BY8
3121 ENUMX
3122   BFD_RELOC_SH_DISP20
3123 ENUMX
3124   BFD_RELOC_SH_DISP20BY8
3125 ENUMX
3126   BFD_RELOC_SH_IMM4
3127 ENUMX
3128   BFD_RELOC_SH_IMM4BY2
3129 ENUMX
3130   BFD_RELOC_SH_IMM4BY4
3131 ENUMX
3132   BFD_RELOC_SH_IMM8
3133 ENUMX
3134   BFD_RELOC_SH_IMM8BY2
3135 ENUMX
3136   BFD_RELOC_SH_IMM8BY4
3137 ENUMX
3138   BFD_RELOC_SH_PCRELIMM8BY2
3139 ENUMX
3140   BFD_RELOC_SH_PCRELIMM8BY4
3141 ENUMX
3142   BFD_RELOC_SH_SWITCH16
3143 ENUMX
3144   BFD_RELOC_SH_SWITCH32
3145 ENUMX
3146   BFD_RELOC_SH_USES
3147 ENUMX
3148   BFD_RELOC_SH_COUNT
3149 ENUMX
3150   BFD_RELOC_SH_ALIGN
3151 ENUMX
3152   BFD_RELOC_SH_CODE
3153 ENUMX
3154   BFD_RELOC_SH_DATA
3155 ENUMX
3156   BFD_RELOC_SH_LABEL
3157 ENUMX
3158   BFD_RELOC_SH_LOOP_START
3159 ENUMX
3160   BFD_RELOC_SH_LOOP_END
3161 ENUMX
3162   BFD_RELOC_SH_COPY
3163 ENUMX
3164   BFD_RELOC_SH_GLOB_DAT
3165 ENUMX
3166   BFD_RELOC_SH_JMP_SLOT
3167 ENUMX
3168   BFD_RELOC_SH_RELATIVE
3169 ENUMX
3170   BFD_RELOC_SH_GOTPC
3171 ENUMX
3172   BFD_RELOC_SH_GOT_LOW16
3173 ENUMX
3174   BFD_RELOC_SH_GOT_MEDLOW16
3175 ENUMX
3176   BFD_RELOC_SH_GOT_MEDHI16
3177 ENUMX
3178   BFD_RELOC_SH_GOT_HI16
3179 ENUMX
3180   BFD_RELOC_SH_GOTPLT_LOW16
3181 ENUMX
3182   BFD_RELOC_SH_GOTPLT_MEDLOW16
3183 ENUMX
3184   BFD_RELOC_SH_GOTPLT_MEDHI16
3185 ENUMX
3186   BFD_RELOC_SH_GOTPLT_HI16
3187 ENUMX
3188   BFD_RELOC_SH_PLT_LOW16
3189 ENUMX
3190   BFD_RELOC_SH_PLT_MEDLOW16
3191 ENUMX
3192   BFD_RELOC_SH_PLT_MEDHI16
3193 ENUMX
3194   BFD_RELOC_SH_PLT_HI16
3195 ENUMX
3196   BFD_RELOC_SH_GOTOFF_LOW16
3197 ENUMX
3198   BFD_RELOC_SH_GOTOFF_MEDLOW16
3199 ENUMX
3200   BFD_RELOC_SH_GOTOFF_MEDHI16
3201 ENUMX
3202   BFD_RELOC_SH_GOTOFF_HI16
3203 ENUMX
3204   BFD_RELOC_SH_GOTPC_LOW16
3205 ENUMX
3206   BFD_RELOC_SH_GOTPC_MEDLOW16
3207 ENUMX
3208   BFD_RELOC_SH_GOTPC_MEDHI16
3209 ENUMX
3210   BFD_RELOC_SH_GOTPC_HI16
3211 ENUMX
3212   BFD_RELOC_SH_COPY64
3213 ENUMX
3214   BFD_RELOC_SH_GLOB_DAT64
3215 ENUMX
3216   BFD_RELOC_SH_JMP_SLOT64
3217 ENUMX
3218   BFD_RELOC_SH_RELATIVE64
3219 ENUMX
3220   BFD_RELOC_SH_GOT10BY4
3221 ENUMX
3222   BFD_RELOC_SH_GOT10BY8
3223 ENUMX
3224   BFD_RELOC_SH_GOTPLT10BY4
3225 ENUMX
3226   BFD_RELOC_SH_GOTPLT10BY8
3227 ENUMX
3228   BFD_RELOC_SH_GOTPLT32
3229 ENUMX
3230   BFD_RELOC_SH_SHMEDIA_CODE
3231 ENUMX
3232   BFD_RELOC_SH_IMMU5
3233 ENUMX
3234   BFD_RELOC_SH_IMMS6
3235 ENUMX
3236   BFD_RELOC_SH_IMMS6BY32
3237 ENUMX
3238   BFD_RELOC_SH_IMMU6
3239 ENUMX
3240   BFD_RELOC_SH_IMMS10
3241 ENUMX
3242   BFD_RELOC_SH_IMMS10BY2
3243 ENUMX
3244   BFD_RELOC_SH_IMMS10BY4
3245 ENUMX
3246   BFD_RELOC_SH_IMMS10BY8
3247 ENUMX
3248   BFD_RELOC_SH_IMMS16
3249 ENUMX
3250   BFD_RELOC_SH_IMMU16
3251 ENUMX
3252   BFD_RELOC_SH_IMM_LOW16
3253 ENUMX
3254   BFD_RELOC_SH_IMM_LOW16_PCREL
3255 ENUMX
3256   BFD_RELOC_SH_IMM_MEDLOW16
3257 ENUMX
3258   BFD_RELOC_SH_IMM_MEDLOW16_PCREL
3259 ENUMX
3260   BFD_RELOC_SH_IMM_MEDHI16
3261 ENUMX
3262   BFD_RELOC_SH_IMM_MEDHI16_PCREL
3263 ENUMX
3264   BFD_RELOC_SH_IMM_HI16
3265 ENUMX
3266   BFD_RELOC_SH_IMM_HI16_PCREL
3267 ENUMX
3268   BFD_RELOC_SH_PT_16
3269 ENUMX
3270   BFD_RELOC_SH_TLS_GD_32
3271 ENUMX
3272   BFD_RELOC_SH_TLS_LD_32
3273 ENUMX
3274   BFD_RELOC_SH_TLS_LDO_32
3275 ENUMX
3276   BFD_RELOC_SH_TLS_IE_32
3277 ENUMX
3278   BFD_RELOC_SH_TLS_LE_32
3279 ENUMX
3280   BFD_RELOC_SH_TLS_DTPMOD32
3281 ENUMX
3282   BFD_RELOC_SH_TLS_DTPOFF32
3283 ENUMX
3284   BFD_RELOC_SH_TLS_TPOFF32
3285 ENUMX
3286   BFD_RELOC_SH_GOT20
3287 ENUMX
3288   BFD_RELOC_SH_GOTOFF20
3289 ENUMX
3290   BFD_RELOC_SH_GOTFUNCDESC
3291 ENUMX
3292   BFD_RELOC_SH_GOTFUNCDESC20
3293 ENUMX
3294   BFD_RELOC_SH_GOTOFFFUNCDESC
3295 ENUMX
3296   BFD_RELOC_SH_GOTOFFFUNCDESC20
3297 ENUMX
3298   BFD_RELOC_SH_FUNCDESC
3299 ENUMDOC
3300   Renesas / SuperH SH relocs.  Not all of these appear in object files.
3301
3302 ENUM
3303   BFD_RELOC_ARC_B22_PCREL
3304 ENUMDOC
3305   ARC Cores relocs.
3306   ARC 22 bit pc-relative branch.  The lowest two bits must be zero and are
3307   not stored in the instruction.  The high 20 bits are installed in bits 26
3308   through 7 of the instruction.
3309 ENUM
3310   BFD_RELOC_ARC_B26
3311 ENUMDOC
3312   ARC 26 bit absolute branch.  The lowest two bits must be zero and are not
3313   stored in the instruction.  The high 24 bits are installed in bits 23
3314   through 0.
3315
3316 ENUM
3317   BFD_RELOC_BFIN_16_IMM
3318 ENUMDOC
3319   ADI Blackfin 16 bit immediate absolute reloc.
3320 ENUM
3321   BFD_RELOC_BFIN_16_HIGH
3322 ENUMDOC
3323   ADI Blackfin 16 bit immediate absolute reloc higher 16 bits.
3324 ENUM
3325   BFD_RELOC_BFIN_4_PCREL
3326 ENUMDOC
3327   ADI Blackfin 'a' part of LSETUP.
3328 ENUM
3329   BFD_RELOC_BFIN_5_PCREL
3330 ENUMDOC
3331   ADI Blackfin.
3332 ENUM
3333   BFD_RELOC_BFIN_16_LOW
3334 ENUMDOC
3335   ADI Blackfin 16 bit immediate absolute reloc lower 16 bits.
3336 ENUM
3337   BFD_RELOC_BFIN_10_PCREL
3338 ENUMDOC
3339   ADI Blackfin.
3340 ENUM
3341   BFD_RELOC_BFIN_11_PCREL
3342 ENUMDOC
3343   ADI Blackfin 'b' part of LSETUP.
3344 ENUM
3345   BFD_RELOC_BFIN_12_PCREL_JUMP
3346 ENUMDOC
3347   ADI Blackfin.
3348 ENUM
3349   BFD_RELOC_BFIN_12_PCREL_JUMP_S
3350 ENUMDOC
3351   ADI Blackfin Short jump, pcrel.
3352 ENUM
3353   BFD_RELOC_BFIN_24_PCREL_CALL_X
3354 ENUMDOC
3355   ADI Blackfin Call.x not implemented.
3356 ENUM
3357   BFD_RELOC_BFIN_24_PCREL_JUMP_L
3358 ENUMDOC
3359   ADI Blackfin Long Jump pcrel.
3360 ENUM
3361   BFD_RELOC_BFIN_GOT17M4
3362 ENUMX
3363   BFD_RELOC_BFIN_GOTHI
3364 ENUMX
3365   BFD_RELOC_BFIN_GOTLO
3366 ENUMX
3367   BFD_RELOC_BFIN_FUNCDESC
3368 ENUMX
3369   BFD_RELOC_BFIN_FUNCDESC_GOT17M4
3370 ENUMX
3371   BFD_RELOC_BFIN_FUNCDESC_GOTHI
3372 ENUMX
3373   BFD_RELOC_BFIN_FUNCDESC_GOTLO
3374 ENUMX
3375   BFD_RELOC_BFIN_FUNCDESC_VALUE
3376 ENUMX
3377   BFD_RELOC_BFIN_FUNCDESC_GOTOFF17M4
3378 ENUMX
3379   BFD_RELOC_BFIN_FUNCDESC_GOTOFFHI
3380 ENUMX
3381   BFD_RELOC_BFIN_FUNCDESC_GOTOFFLO
3382 ENUMX
3383   BFD_RELOC_BFIN_GOTOFF17M4
3384 ENUMX
3385   BFD_RELOC_BFIN_GOTOFFHI
3386 ENUMX
3387   BFD_RELOC_BFIN_GOTOFFLO
3388 ENUMDOC
3389   ADI Blackfin FD-PIC relocations.
3390 ENUM
3391   BFD_RELOC_BFIN_GOT
3392 ENUMDOC
3393   ADI Blackfin GOT relocation.
3394 ENUM
3395   BFD_RELOC_BFIN_PLTPC
3396 ENUMDOC
3397   ADI Blackfin PLTPC relocation.
3398 ENUM
3399   BFD_ARELOC_BFIN_PUSH
3400 ENUMDOC
3401   ADI Blackfin arithmetic relocation.
3402 ENUM
3403   BFD_ARELOC_BFIN_CONST
3404 ENUMDOC
3405   ADI Blackfin arithmetic relocation.
3406 ENUM
3407   BFD_ARELOC_BFIN_ADD
3408 ENUMDOC
3409   ADI Blackfin arithmetic relocation.
3410 ENUM
3411   BFD_ARELOC_BFIN_SUB
3412 ENUMDOC
3413   ADI Blackfin arithmetic relocation.
3414 ENUM
3415   BFD_ARELOC_BFIN_MULT
3416 ENUMDOC
3417   ADI Blackfin arithmetic relocation.
3418 ENUM
3419   BFD_ARELOC_BFIN_DIV
3420 ENUMDOC
3421   ADI Blackfin arithmetic relocation.
3422 ENUM
3423   BFD_ARELOC_BFIN_MOD
3424 ENUMDOC
3425   ADI Blackfin arithmetic relocation.
3426 ENUM
3427   BFD_ARELOC_BFIN_LSHIFT
3428 ENUMDOC
3429   ADI Blackfin arithmetic relocation.
3430 ENUM
3431   BFD_ARELOC_BFIN_RSHIFT
3432 ENUMDOC
3433   ADI Blackfin arithmetic relocation.
3434 ENUM
3435   BFD_ARELOC_BFIN_AND
3436 ENUMDOC
3437   ADI Blackfin arithmetic relocation.
3438 ENUM
3439   BFD_ARELOC_BFIN_OR
3440 ENUMDOC
3441   ADI Blackfin arithmetic relocation.
3442 ENUM
3443   BFD_ARELOC_BFIN_XOR
3444 ENUMDOC
3445   ADI Blackfin arithmetic relocation.
3446 ENUM
3447   BFD_ARELOC_BFIN_LAND
3448 ENUMDOC
3449   ADI Blackfin arithmetic relocation.
3450 ENUM
3451   BFD_ARELOC_BFIN_LOR
3452 ENUMDOC
3453   ADI Blackfin arithmetic relocation.
3454 ENUM
3455   BFD_ARELOC_BFIN_LEN
3456 ENUMDOC
3457   ADI Blackfin arithmetic relocation.
3458 ENUM
3459   BFD_ARELOC_BFIN_NEG
3460 ENUMDOC
3461   ADI Blackfin arithmetic relocation.
3462 ENUM
3463   BFD_ARELOC_BFIN_COMP
3464 ENUMDOC
3465   ADI Blackfin arithmetic relocation.
3466 ENUM
3467   BFD_ARELOC_BFIN_PAGE
3468 ENUMDOC
3469   ADI Blackfin arithmetic relocation.
3470 ENUM
3471   BFD_ARELOC_BFIN_HWPAGE
3472 ENUMDOC
3473   ADI Blackfin arithmetic relocation.
3474 ENUM
3475   BFD_ARELOC_BFIN_ADDR
3476 ENUMDOC
3477   ADI Blackfin arithmetic relocation.
3478
3479 ENUM
3480   BFD_RELOC_D10V_10_PCREL_R
3481 ENUMDOC
3482   Mitsubishi D10V relocs.
3483   This is a 10-bit reloc with the right 2 bits
3484   assumed to be 0.
3485 ENUM
3486   BFD_RELOC_D10V_10_PCREL_L
3487 ENUMDOC
3488   Mitsubishi D10V relocs.
3489   This is a 10-bit reloc with the right 2 bits
3490   assumed to be 0.  This is the same as the previous reloc
3491   except it is in the left container, i.e.,
3492   shifted left 15 bits.
3493 ENUM
3494   BFD_RELOC_D10V_18
3495 ENUMDOC
3496   This is an 18-bit reloc with the right 2 bits
3497   assumed to be 0.
3498 ENUM
3499   BFD_RELOC_D10V_18_PCREL
3500 ENUMDOC
3501   This is an 18-bit reloc with the right 2 bits
3502   assumed to be 0.
3503
3504 ENUM
3505   BFD_RELOC_D30V_6
3506 ENUMDOC
3507   Mitsubishi D30V relocs.
3508   This is a 6-bit absolute reloc.
3509 ENUM
3510   BFD_RELOC_D30V_9_PCREL
3511 ENUMDOC
3512   This is a 6-bit pc-relative reloc with
3513   the right 3 bits assumed to be 0.
3514 ENUM
3515   BFD_RELOC_D30V_9_PCREL_R
3516 ENUMDOC
3517   This is a 6-bit pc-relative reloc with
3518   the right 3 bits assumed to be 0. Same
3519   as the previous reloc but on the right side
3520   of the container.
3521 ENUM
3522   BFD_RELOC_D30V_15
3523 ENUMDOC
3524   This is a 12-bit absolute reloc with the
3525   right 3 bitsassumed to be 0.
3526 ENUM
3527   BFD_RELOC_D30V_15_PCREL
3528 ENUMDOC
3529   This is a 12-bit pc-relative reloc with
3530   the right 3 bits assumed to be 0.
3531 ENUM
3532   BFD_RELOC_D30V_15_PCREL_R
3533 ENUMDOC
3534   This is a 12-bit pc-relative reloc with
3535   the right 3 bits assumed to be 0. Same
3536   as the previous reloc but on the right side
3537   of the container.
3538 ENUM
3539   BFD_RELOC_D30V_21
3540 ENUMDOC
3541   This is an 18-bit absolute reloc with
3542   the right 3 bits assumed to be 0.
3543 ENUM
3544   BFD_RELOC_D30V_21_PCREL
3545 ENUMDOC
3546   This is an 18-bit pc-relative reloc with
3547   the right 3 bits assumed to be 0.
3548 ENUM
3549   BFD_RELOC_D30V_21_PCREL_R
3550 ENUMDOC
3551   This is an 18-bit pc-relative reloc with
3552   the right 3 bits assumed to be 0. Same
3553   as the previous reloc but on the right side
3554   of the container.
3555 ENUM
3556   BFD_RELOC_D30V_32
3557 ENUMDOC
3558   This is a 32-bit absolute reloc.
3559 ENUM
3560   BFD_RELOC_D30V_32_PCREL
3561 ENUMDOC
3562   This is a 32-bit pc-relative reloc.
3563
3564 ENUM
3565   BFD_RELOC_DLX_HI16_S
3566 ENUMDOC
3567   DLX relocs
3568 ENUM
3569   BFD_RELOC_DLX_LO16
3570 ENUMDOC
3571   DLX relocs
3572 ENUM
3573   BFD_RELOC_DLX_JMP26
3574 ENUMDOC
3575   DLX relocs
3576
3577 ENUM
3578   BFD_RELOC_M32C_HI8
3579 ENUMX
3580   BFD_RELOC_M32C_RL_JUMP
3581 ENUMX
3582   BFD_RELOC_M32C_RL_1ADDR
3583 ENUMX
3584   BFD_RELOC_M32C_RL_2ADDR
3585 ENUMDOC
3586   Renesas M16C/M32C Relocations.
3587
3588 ENUM
3589   BFD_RELOC_M32R_24
3590 ENUMDOC
3591   Renesas M32R (formerly Mitsubishi M32R) relocs.
3592   This is a 24 bit absolute address.
3593 ENUM
3594   BFD_RELOC_M32R_10_PCREL
3595 ENUMDOC
3596   This is a 10-bit pc-relative reloc with the right 2 bits assumed to be 0.
3597 ENUM
3598   BFD_RELOC_M32R_18_PCREL
3599 ENUMDOC
3600   This is an 18-bit reloc with the right 2 bits assumed to be 0.
3601 ENUM
3602   BFD_RELOC_M32R_26_PCREL
3603 ENUMDOC
3604   This is a 26-bit reloc with the right 2 bits assumed to be 0.
3605 ENUM
3606   BFD_RELOC_M32R_HI16_ULO
3607 ENUMDOC
3608   This is a 16-bit reloc containing the high 16 bits of an address
3609   used when the lower 16 bits are treated as unsigned.
3610 ENUM
3611   BFD_RELOC_M32R_HI16_SLO
3612 ENUMDOC
3613   This is a 16-bit reloc containing the high 16 bits of an address
3614   used when the lower 16 bits are treated as signed.
3615 ENUM
3616   BFD_RELOC_M32R_LO16
3617 ENUMDOC
3618   This is a 16-bit reloc containing the lower 16 bits of an address.
3619 ENUM
3620   BFD_RELOC_M32R_SDA16
3621 ENUMDOC
3622   This is a 16-bit reloc containing the small data area offset for use in
3623   add3, load, and store instructions.
3624 ENUM
3625   BFD_RELOC_M32R_GOT24
3626 ENUMX
3627   BFD_RELOC_M32R_26_PLTREL
3628 ENUMX
3629   BFD_RELOC_M32R_COPY
3630 ENUMX
3631   BFD_RELOC_M32R_GLOB_DAT
3632 ENUMX
3633   BFD_RELOC_M32R_JMP_SLOT
3634 ENUMX
3635   BFD_RELOC_M32R_RELATIVE
3636 ENUMX
3637   BFD_RELOC_M32R_GOTOFF
3638 ENUMX
3639   BFD_RELOC_M32R_GOTOFF_HI_ULO
3640 ENUMX
3641   BFD_RELOC_M32R_GOTOFF_HI_SLO
3642 ENUMX
3643   BFD_RELOC_M32R_GOTOFF_LO
3644 ENUMX
3645   BFD_RELOC_M32R_GOTPC24
3646 ENUMX
3647   BFD_RELOC_M32R_GOT16_HI_ULO
3648 ENUMX
3649   BFD_RELOC_M32R_GOT16_HI_SLO
3650 ENUMX
3651   BFD_RELOC_M32R_GOT16_LO
3652 ENUMX
3653   BFD_RELOC_M32R_GOTPC_HI_ULO
3654 ENUMX
3655   BFD_RELOC_M32R_GOTPC_HI_SLO
3656 ENUMX
3657   BFD_RELOC_M32R_GOTPC_LO
3658 ENUMDOC
3659   For PIC.
3660
3661
3662 ENUM
3663   BFD_RELOC_V850_9_PCREL
3664 ENUMDOC
3665   This is a 9-bit reloc
3666 ENUM
3667   BFD_RELOC_V850_22_PCREL
3668 ENUMDOC
3669   This is a 22-bit reloc
3670
3671 ENUM
3672   BFD_RELOC_V850_SDA_16_16_OFFSET
3673 ENUMDOC
3674   This is a 16 bit offset from the short data area pointer.
3675 ENUM
3676   BFD_RELOC_V850_SDA_15_16_OFFSET
3677 ENUMDOC
3678   This is a 16 bit offset (of which only 15 bits are used) from the
3679   short data area pointer.
3680 ENUM
3681   BFD_RELOC_V850_ZDA_16_16_OFFSET
3682 ENUMDOC
3683   This is a 16 bit offset from the zero data area pointer.
3684 ENUM
3685   BFD_RELOC_V850_ZDA_15_16_OFFSET
3686 ENUMDOC
3687   This is a 16 bit offset (of which only 15 bits are used) from the
3688   zero data area pointer.
3689 ENUM
3690   BFD_RELOC_V850_TDA_6_8_OFFSET
3691 ENUMDOC
3692   This is an 8 bit offset (of which only 6 bits are used) from the
3693   tiny data area pointer.
3694 ENUM
3695   BFD_RELOC_V850_TDA_7_8_OFFSET
3696 ENUMDOC
3697   This is an 8bit offset (of which only 7 bits are used) from the tiny
3698   data area pointer.
3699 ENUM
3700   BFD_RELOC_V850_TDA_7_7_OFFSET
3701 ENUMDOC
3702   This is a 7 bit offset from the tiny data area pointer.
3703 ENUM
3704   BFD_RELOC_V850_TDA_16_16_OFFSET
3705 ENUMDOC
3706   This is a 16 bit offset from the tiny data area pointer.
3707 COMMENT
3708 ENUM
3709   BFD_RELOC_V850_TDA_4_5_OFFSET
3710 ENUMDOC
3711   This is a 5 bit offset (of which only 4 bits are used) from the tiny
3712   data area pointer.
3713 ENUM
3714   BFD_RELOC_V850_TDA_4_4_OFFSET
3715 ENUMDOC
3716   This is a 4 bit offset from the tiny data area pointer.
3717 ENUM
3718   BFD_RELOC_V850_SDA_16_16_SPLIT_OFFSET
3719 ENUMDOC
3720   This is a 16 bit offset from the short data area pointer, with the
3721   bits placed non-contiguously in the instruction.
3722 ENUM
3723   BFD_RELOC_V850_ZDA_16_16_SPLIT_OFFSET
3724 ENUMDOC
3725   This is a 16 bit offset from the zero data area pointer, with the
3726   bits placed non-contiguously in the instruction.
3727 ENUM
3728   BFD_RELOC_V850_CALLT_6_7_OFFSET
3729 ENUMDOC
3730   This is a 6 bit offset from the call table base pointer.
3731 ENUM
3732   BFD_RELOC_V850_CALLT_16_16_OFFSET
3733 ENUMDOC
3734   This is a 16 bit offset from the call table base pointer.
3735 ENUM
3736   BFD_RELOC_V850_LONGCALL
3737 ENUMDOC
3738   Used for relaxing indirect function calls.
3739 ENUM
3740   BFD_RELOC_V850_LONGJUMP
3741 ENUMDOC
3742   Used for relaxing indirect jumps.
3743 ENUM
3744   BFD_RELOC_V850_ALIGN
3745 ENUMDOC
3746   Used to maintain alignment whilst relaxing.
3747 ENUM
3748   BFD_RELOC_V850_LO16_SPLIT_OFFSET
3749 ENUMDOC
3750   This is a variation of BFD_RELOC_LO16 that can be used in v850e ld.bu
3751   instructions.
3752 ENUM
3753   BFD_RELOC_V850_16_PCREL
3754 ENUMDOC
3755   This is a 16-bit reloc.
3756 ENUM
3757   BFD_RELOC_V850_17_PCREL
3758 ENUMDOC
3759   This is a 17-bit reloc.
3760 ENUM
3761   BFD_RELOC_V850_23
3762 ENUMDOC
3763   This is a 23-bit reloc.
3764 ENUM
3765   BFD_RELOC_V850_32_PCREL
3766 ENUMDOC
3767   This is a 32-bit reloc.
3768 ENUM
3769   BFD_RELOC_V850_32_ABS
3770 ENUMDOC
3771   This is a 32-bit reloc.
3772 ENUM
3773   BFD_RELOC_V850_16_SPLIT_OFFSET
3774 ENUMDOC
3775   This is a 16-bit reloc.
3776 ENUM
3777   BFD_RELOC_V850_16_S1
3778 ENUMDOC
3779   This is a 16-bit reloc.
3780 ENUM
3781   BFD_RELOC_V850_LO16_S1
3782 ENUMDOC
3783   Low 16 bits. 16 bit shifted by 1.
3784 ENUM
3785   BFD_RELOC_V850_CALLT_15_16_OFFSET
3786 ENUMDOC
3787   This is a 16 bit offset from the call table base pointer.
3788 ENUM
3789   BFD_RELOC_V850_32_GOTPCREL
3790 ENUMDOC
3791   DSO relocations.
3792 ENUM
3793   BFD_RELOC_V850_16_GOT
3794 ENUMDOC
3795   DSO relocations.
3796 ENUM
3797   BFD_RELOC_V850_32_GOT
3798 ENUMDOC
3799   DSO relocations.
3800 ENUM
3801   BFD_RELOC_V850_22_PLT_PCREL
3802 ENUMDOC
3803   DSO relocations.
3804 ENUM
3805   BFD_RELOC_V850_32_PLT_PCREL
3806 ENUMDOC
3807   DSO relocations.
3808 ENUM
3809   BFD_RELOC_V850_COPY
3810 ENUMDOC
3811   DSO relocations.
3812 ENUM
3813   BFD_RELOC_V850_GLOB_DAT
3814 ENUMDOC
3815   DSO relocations.
3816 ENUM
3817   BFD_RELOC_V850_JMP_SLOT
3818 ENUMDOC
3819   DSO relocations.
3820 ENUM
3821   BFD_RELOC_V850_RELATIVE
3822 ENUMDOC
3823   DSO relocations.
3824 ENUM
3825   BFD_RELOC_V850_16_GOTOFF
3826 ENUMDOC
3827   DSO relocations.
3828 ENUM
3829   BFD_RELOC_V850_32_GOTOFF
3830 ENUMDOC
3831   DSO relocations.
3832 ENUM
3833   BFD_RELOC_V850_CODE
3834 ENUMDOC
3835   start code.
3836 ENUM
3837   BFD_RELOC_V850_DATA
3838 ENUMDOC
3839   start data in text.
3840 ENUM
3841   BFD_RELOC_MN10300_32_PCREL
3842 ENUMDOC
3843   This is a 32bit pcrel reloc for the mn10300, offset by two bytes in the
3844   instruction.
3845 ENUM
3846   BFD_RELOC_MN10300_16_PCREL
3847 ENUMDOC
3848   This is a 16bit pcrel reloc for the mn10300, offset by two bytes in the
3849   instruction.
3850
3851 ENUM
3852   BFD_RELOC_TIC30_LDP
3853 ENUMDOC
3854   This is a 8bit DP reloc for the tms320c30, where the most
3855   significant 8 bits of a 24 bit word are placed into the least
3856   significant 8 bits of the opcode.
3857
3858 ENUM
3859   BFD_RELOC_TIC54X_PARTLS7
3860 ENUMDOC
3861   This is a 7bit reloc for the tms320c54x, where the least
3862   significant 7 bits of a 16 bit word are placed into the least
3863   significant 7 bits of the opcode.
3864
3865 ENUM
3866   BFD_RELOC_TIC54X_PARTMS9
3867 ENUMDOC
3868   This is a 9bit DP reloc for the tms320c54x, where the most
3869   significant 9 bits of a 16 bit word are placed into the least
3870   significant 9 bits of the opcode.
3871
3872 ENUM
3873   BFD_RELOC_TIC54X_23
3874 ENUMDOC
3875   This is an extended address 23-bit reloc for the tms320c54x.
3876
3877 ENUM
3878   BFD_RELOC_TIC54X_16_OF_23
3879 ENUMDOC
3880   This is a 16-bit reloc for the tms320c54x, where the least
3881   significant 16 bits of a 23-bit extended address are placed into
3882   the opcode.
3883
3884 ENUM
3885   BFD_RELOC_TIC54X_MS7_OF_23
3886 ENUMDOC
3887   This is a reloc for the tms320c54x, where the most
3888   significant 7 bits of a 23-bit extended address are placed into
3889   the opcode.
3890
3891 ENUM
3892   BFD_RELOC_C6000_PCR_S21
3893 ENUMX
3894   BFD_RELOC_C6000_PCR_S12
3895 ENUMX
3896   BFD_RELOC_C6000_PCR_S10
3897 ENUMX
3898   BFD_RELOC_C6000_PCR_S7
3899 ENUMX
3900   BFD_RELOC_C6000_ABS_S16
3901 ENUMX
3902   BFD_RELOC_C6000_ABS_L16
3903 ENUMX
3904   BFD_RELOC_C6000_ABS_H16
3905 ENUMX
3906   BFD_RELOC_C6000_SBR_U15_B
3907 ENUMX
3908   BFD_RELOC_C6000_SBR_U15_H
3909 ENUMX
3910   BFD_RELOC_C6000_SBR_U15_W
3911 ENUMX
3912   BFD_RELOC_C6000_SBR_S16
3913 ENUMX
3914   BFD_RELOC_C6000_SBR_L16_B
3915 ENUMX
3916   BFD_RELOC_C6000_SBR_L16_H
3917 ENUMX
3918   BFD_RELOC_C6000_SBR_L16_W
3919 ENUMX
3920   BFD_RELOC_C6000_SBR_H16_B
3921 ENUMX
3922   BFD_RELOC_C6000_SBR_H16_H
3923 ENUMX
3924   BFD_RELOC_C6000_SBR_H16_W
3925 ENUMX
3926   BFD_RELOC_C6000_SBR_GOT_U15_W
3927 ENUMX
3928   BFD_RELOC_C6000_SBR_GOT_L16_W
3929 ENUMX
3930   BFD_RELOC_C6000_SBR_GOT_H16_W
3931 ENUMX
3932   BFD_RELOC_C6000_DSBT_INDEX
3933 ENUMX
3934   BFD_RELOC_C6000_PREL31
3935 ENUMX
3936   BFD_RELOC_C6000_COPY
3937 ENUMX
3938   BFD_RELOC_C6000_ALIGN
3939 ENUMX
3940   BFD_RELOC_C6000_FPHEAD
3941 ENUMX
3942   BFD_RELOC_C6000_NOCMP
3943 ENUMDOC
3944   TMS320C6000 relocations.
3945
3946 ENUM
3947   BFD_RELOC_FR30_48
3948 ENUMDOC
3949   This is a 48 bit reloc for the FR30 that stores 32 bits.
3950 ENUM
3951   BFD_RELOC_FR30_20
3952 ENUMDOC
3953   This is a 32 bit reloc for the FR30 that stores 20 bits split up into
3954   two sections.
3955 ENUM
3956   BFD_RELOC_FR30_6_IN_4
3957 ENUMDOC
3958   This is a 16 bit reloc for the FR30 that stores a 6 bit word offset in
3959   4 bits.
3960 ENUM
3961   BFD_RELOC_FR30_8_IN_8
3962 ENUMDOC
3963   This is a 16 bit reloc for the FR30 that stores an 8 bit byte offset
3964   into 8 bits.
3965 ENUM
3966   BFD_RELOC_FR30_9_IN_8
3967 ENUMDOC
3968   This is a 16 bit reloc for the FR30 that stores a 9 bit short offset
3969   into 8 bits.
3970 ENUM
3971   BFD_RELOC_FR30_10_IN_8
3972 ENUMDOC
3973   This is a 16 bit reloc for the FR30 that stores a 10 bit word offset
3974   into 8 bits.
3975 ENUM
3976   BFD_RELOC_FR30_9_PCREL
3977 ENUMDOC
3978   This is a 16 bit reloc for the FR30 that stores a 9 bit pc relative
3979   short offset into 8 bits.
3980 ENUM
3981   BFD_RELOC_FR30_12_PCREL
3982 ENUMDOC
3983   This is a 16 bit reloc for the FR30 that stores a 12 bit pc relative
3984   short offset into 11 bits.
3985
3986 ENUM
3987   BFD_RELOC_MCORE_PCREL_IMM8BY4
3988 ENUMX
3989   BFD_RELOC_MCORE_PCREL_IMM11BY2
3990 ENUMX
3991   BFD_RELOC_MCORE_PCREL_IMM4BY2
3992 ENUMX
3993   BFD_RELOC_MCORE_PCREL_32
3994 ENUMX
3995   BFD_RELOC_MCORE_PCREL_JSR_IMM11BY2
3996 ENUMX
3997   BFD_RELOC_MCORE_RVA
3998 ENUMDOC
3999   Motorola Mcore relocations.
4000
4001 ENUM
4002   BFD_RELOC_MEP_8
4003 ENUMX
4004   BFD_RELOC_MEP_16
4005 ENUMX
4006   BFD_RELOC_MEP_32
4007 ENUMX
4008   BFD_RELOC_MEP_PCREL8A2
4009 ENUMX
4010   BFD_RELOC_MEP_PCREL12A2
4011 ENUMX
4012   BFD_RELOC_MEP_PCREL17A2
4013 ENUMX
4014   BFD_RELOC_MEP_PCREL24A2
4015 ENUMX
4016   BFD_RELOC_MEP_PCABS24A2
4017 ENUMX
4018   BFD_RELOC_MEP_LOW16
4019 ENUMX
4020   BFD_RELOC_MEP_HI16U
4021 ENUMX
4022   BFD_RELOC_MEP_HI16S
4023 ENUMX
4024   BFD_RELOC_MEP_GPREL
4025 ENUMX
4026   BFD_RELOC_MEP_TPREL
4027 ENUMX
4028   BFD_RELOC_MEP_TPREL7
4029 ENUMX
4030   BFD_RELOC_MEP_TPREL7A2
4031 ENUMX
4032   BFD_RELOC_MEP_TPREL7A4
4033 ENUMX
4034   BFD_RELOC_MEP_UIMM24
4035 ENUMX
4036   BFD_RELOC_MEP_ADDR24A4
4037 ENUMX
4038   BFD_RELOC_MEP_GNU_VTINHERIT
4039 ENUMX
4040   BFD_RELOC_MEP_GNU_VTENTRY
4041 ENUMDOC
4042   Toshiba Media Processor Relocations.
4043 COMMENT
4044
4045 ENUM
4046   BFD_RELOC_MMIX_GETA
4047 ENUMX
4048   BFD_RELOC_MMIX_GETA_1
4049 ENUMX
4050   BFD_RELOC_MMIX_GETA_2
4051 ENUMX
4052   BFD_RELOC_MMIX_GETA_3
4053 ENUMDOC
4054   These are relocations for the GETA instruction.
4055 ENUM
4056   BFD_RELOC_MMIX_CBRANCH
4057 ENUMX
4058   BFD_RELOC_MMIX_CBRANCH_J
4059 ENUMX
4060   BFD_RELOC_MMIX_CBRANCH_1
4061 ENUMX
4062   BFD_RELOC_MMIX_CBRANCH_2
4063 ENUMX
4064   BFD_RELOC_MMIX_CBRANCH_3
4065 ENUMDOC
4066   These are relocations for a conditional branch instruction.
4067 ENUM
4068   BFD_RELOC_MMIX_PUSHJ
4069 ENUMX
4070   BFD_RELOC_MMIX_PUSHJ_1
4071 ENUMX
4072   BFD_RELOC_MMIX_PUSHJ_2
4073 ENUMX
4074   BFD_RELOC_MMIX_PUSHJ_3
4075 ENUMX
4076   BFD_RELOC_MMIX_PUSHJ_STUBBABLE
4077 ENUMDOC
4078   These are relocations for the PUSHJ instruction.
4079 ENUM
4080   BFD_RELOC_MMIX_JMP
4081 ENUMX
4082   BFD_RELOC_MMIX_JMP_1
4083 ENUMX
4084   BFD_RELOC_MMIX_JMP_2
4085 ENUMX
4086   BFD_RELOC_MMIX_JMP_3
4087 ENUMDOC
4088   These are relocations for the JMP instruction.
4089 ENUM
4090   BFD_RELOC_MMIX_ADDR19
4091 ENUMDOC
4092   This is a relocation for a relative address as in a GETA instruction or
4093   a branch.
4094 ENUM
4095   BFD_RELOC_MMIX_ADDR27
4096 ENUMDOC
4097   This is a relocation for a relative address as in a JMP instruction.
4098 ENUM
4099   BFD_RELOC_MMIX_REG_OR_BYTE
4100 ENUMDOC
4101   This is a relocation for an instruction field that may be a general
4102   register or a value 0..255.
4103 ENUM
4104   BFD_RELOC_MMIX_REG
4105 ENUMDOC
4106   This is a relocation for an instruction field that may be a general
4107   register.
4108 ENUM
4109   BFD_RELOC_MMIX_BASE_PLUS_OFFSET
4110 ENUMDOC
4111   This is a relocation for two instruction fields holding a register and
4112   an offset, the equivalent of the relocation.
4113 ENUM
4114   BFD_RELOC_MMIX_LOCAL
4115 ENUMDOC
4116   This relocation is an assertion that the expression is not allocated as
4117   a global register.  It does not modify contents.
4118
4119 ENUM
4120   BFD_RELOC_AVR_7_PCREL
4121 ENUMDOC
4122   This is a 16 bit reloc for the AVR that stores 8 bit pc relative
4123   short offset into 7 bits.
4124 ENUM
4125   BFD_RELOC_AVR_13_PCREL
4126 ENUMDOC
4127   This is a 16 bit reloc for the AVR that stores 13 bit pc relative
4128   short offset into 12 bits.
4129 ENUM
4130   BFD_RELOC_AVR_16_PM
4131 ENUMDOC
4132   This is a 16 bit reloc for the AVR that stores 17 bit value (usually
4133   program memory address) into 16 bits.
4134 ENUM
4135   BFD_RELOC_AVR_LO8_LDI
4136 ENUMDOC
4137   This is a 16 bit reloc for the AVR that stores 8 bit value (usually
4138   data memory address) into 8 bit immediate value of LDI insn.
4139 ENUM
4140   BFD_RELOC_AVR_HI8_LDI
4141 ENUMDOC
4142   This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit
4143   of data memory address) into 8 bit immediate value of LDI insn.
4144 ENUM
4145   BFD_RELOC_AVR_HH8_LDI
4146 ENUMDOC
4147   This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit
4148   of program memory address) into 8 bit immediate value of LDI insn.
4149 ENUM
4150   BFD_RELOC_AVR_MS8_LDI
4151 ENUMDOC
4152   This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit
4153   of 32 bit value) into 8 bit immediate value of LDI insn.
4154 ENUM
4155   BFD_RELOC_AVR_LO8_LDI_NEG
4156 ENUMDOC
4157   This is a 16 bit reloc for the AVR that stores negated 8 bit value
4158   (usually data memory address) into 8 bit immediate value of SUBI insn.
4159 ENUM
4160   BFD_RELOC_AVR_HI8_LDI_NEG
4161 ENUMDOC
4162   This is a 16 bit reloc for the AVR that stores negated 8 bit value
4163   (high 8 bit of data memory address) into 8 bit immediate value of
4164   SUBI insn.
4165 ENUM
4166   BFD_RELOC_AVR_HH8_LDI_NEG
4167 ENUMDOC
4168   This is a 16 bit reloc for the AVR that stores negated 8 bit value
4169   (most high 8 bit of program memory address) into 8 bit immediate value
4170   of LDI or SUBI insn.
4171 ENUM
4172   BFD_RELOC_AVR_MS8_LDI_NEG
4173 ENUMDOC
4174   This is a 16 bit reloc for the AVR that stores negated 8 bit value (msb
4175   of 32 bit value) into 8 bit immediate value of LDI insn.
4176 ENUM
4177   BFD_RELOC_AVR_LO8_LDI_PM
4178 ENUMDOC
4179   This is a 16 bit reloc for the AVR that stores 8 bit value (usually
4180   command address) into 8 bit immediate value of LDI insn.
4181 ENUM
4182   BFD_RELOC_AVR_LO8_LDI_GS
4183 ENUMDOC
4184   This is a 16 bit reloc for the AVR that stores 8 bit value
4185   (command address) into 8 bit immediate value of LDI insn. If the address
4186   is beyond the 128k boundary, the linker inserts a jump stub for this reloc
4187   in the lower 128k.
4188 ENUM
4189   BFD_RELOC_AVR_HI8_LDI_PM
4190 ENUMDOC
4191   This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit
4192   of command address) into 8 bit immediate value of LDI insn.
4193 ENUM
4194   BFD_RELOC_AVR_HI8_LDI_GS
4195 ENUMDOC
4196   This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit
4197   of command address) into 8 bit immediate value of LDI insn.  If the address
4198   is beyond the 128k boundary, the linker inserts a jump stub for this reloc
4199   below 128k.
4200 ENUM
4201   BFD_RELOC_AVR_HH8_LDI_PM
4202 ENUMDOC
4203   This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit
4204   of command address) into 8 bit immediate value of LDI insn.
4205 ENUM
4206   BFD_RELOC_AVR_LO8_LDI_PM_NEG
4207 ENUMDOC
4208   This is a 16 bit reloc for the AVR that stores negated 8 bit value
4209   (usually command address) into 8 bit immediate value of SUBI insn.
4210 ENUM
4211   BFD_RELOC_AVR_HI8_LDI_PM_NEG
4212 ENUMDOC
4213   This is a 16 bit reloc for the AVR that stores negated 8 bit value
4214   (high 8 bit of 16 bit command address) into 8 bit immediate value
4215   of SUBI insn.
4216 ENUM
4217   BFD_RELOC_AVR_HH8_LDI_PM_NEG
4218 ENUMDOC
4219   This is a 16 bit reloc for the AVR that stores negated 8 bit value
4220   (high 6 bit of 22 bit command address) into 8 bit immediate
4221   value of SUBI insn.
4222 ENUM
4223   BFD_RELOC_AVR_CALL
4224 ENUMDOC
4225   This is a 32 bit reloc for the AVR that stores 23 bit value
4226   into 22 bits.
4227 ENUM
4228   BFD_RELOC_AVR_LDI
4229 ENUMDOC
4230   This is a 16 bit reloc for the AVR that stores all needed bits
4231   for absolute addressing with ldi with overflow check to linktime
4232 ENUM
4233   BFD_RELOC_AVR_6
4234 ENUMDOC
4235   This is a 6 bit reloc for the AVR that stores offset for ldd/std
4236   instructions
4237 ENUM
4238   BFD_RELOC_AVR_6_ADIW
4239 ENUMDOC
4240   This is a 6 bit reloc for the AVR that stores offset for adiw/sbiw
4241   instructions
4242
4243 ENUM
4244   BFD_RELOC_RX_NEG8
4245 ENUMX
4246   BFD_RELOC_RX_NEG16
4247 ENUMX
4248   BFD_RELOC_RX_NEG24
4249 ENUMX
4250   BFD_RELOC_RX_NEG32
4251 ENUMX
4252   BFD_RELOC_RX_16_OP
4253 ENUMX
4254   BFD_RELOC_RX_24_OP
4255 ENUMX
4256   BFD_RELOC_RX_32_OP
4257 ENUMX
4258   BFD_RELOC_RX_8U
4259 ENUMX
4260   BFD_RELOC_RX_16U
4261 ENUMX
4262   BFD_RELOC_RX_24U
4263 ENUMX
4264   BFD_RELOC_RX_DIR3U_PCREL
4265 ENUMX
4266   BFD_RELOC_RX_DIFF
4267 ENUMX
4268   BFD_RELOC_RX_GPRELB
4269 ENUMX
4270   BFD_RELOC_RX_GPRELW
4271 ENUMX
4272   BFD_RELOC_RX_GPRELL
4273 ENUMX
4274   BFD_RELOC_RX_SYM
4275 ENUMX
4276   BFD_RELOC_RX_OP_SUBTRACT
4277 ENUMX
4278   BFD_RELOC_RX_OP_NEG
4279 ENUMX
4280   BFD_RELOC_RX_ABS8
4281 ENUMX
4282   BFD_RELOC_RX_ABS16
4283 ENUMX
4284   BFD_RELOC_RX_ABS16_REV
4285 ENUMX
4286   BFD_RELOC_RX_ABS32
4287 ENUMX
4288   BFD_RELOC_RX_ABS32_REV
4289 ENUMX
4290   BFD_RELOC_RX_ABS16U
4291 ENUMX
4292   BFD_RELOC_RX_ABS16UW
4293 ENUMX
4294   BFD_RELOC_RX_ABS16UL
4295 ENUMX
4296   BFD_RELOC_RX_RELAX
4297 ENUMDOC
4298   Renesas RX Relocations.
4299
4300 ENUM
4301   BFD_RELOC_390_12
4302 ENUMDOC
4303    Direct 12 bit.
4304 ENUM
4305   BFD_RELOC_390_GOT12
4306 ENUMDOC
4307   12 bit GOT offset.
4308 ENUM
4309   BFD_RELOC_390_PLT32
4310 ENUMDOC
4311   32 bit PC relative PLT address.
4312 ENUM
4313   BFD_RELOC_390_COPY
4314 ENUMDOC
4315   Copy symbol at runtime.
4316 ENUM
4317   BFD_RELOC_390_GLOB_DAT
4318 ENUMDOC
4319   Create GOT entry.
4320 ENUM
4321   BFD_RELOC_390_JMP_SLOT
4322 ENUMDOC
4323   Create PLT entry.
4324 ENUM
4325   BFD_RELOC_390_RELATIVE
4326 ENUMDOC
4327   Adjust by program base.
4328 ENUM
4329   BFD_RELOC_390_GOTPC
4330 ENUMDOC
4331   32 bit PC relative offset to GOT.
4332 ENUM
4333   BFD_RELOC_390_GOT16
4334 ENUMDOC
4335   16 bit GOT offset.
4336 ENUM
4337   BFD_RELOC_390_PC16DBL
4338 ENUMDOC
4339   PC relative 16 bit shifted by 1.
4340 ENUM
4341   BFD_RELOC_390_PLT16DBL
4342 ENUMDOC
4343   16 bit PC rel. PLT shifted by 1.
4344 ENUM
4345   BFD_RELOC_390_PC32DBL
4346 ENUMDOC
4347   PC relative 32 bit shifted by 1.
4348 ENUM
4349   BFD_RELOC_390_PLT32DBL
4350 ENUMDOC
4351   32 bit PC rel. PLT shifted by 1.
4352 ENUM
4353   BFD_RELOC_390_GOTPCDBL
4354 ENUMDOC
4355   32 bit PC rel. GOT shifted by 1.
4356 ENUM
4357   BFD_RELOC_390_GOT64
4358 ENUMDOC
4359   64 bit GOT offset.
4360 ENUM
4361   BFD_RELOC_390_PLT64
4362 ENUMDOC
4363   64 bit PC relative PLT address.
4364 ENUM
4365   BFD_RELOC_390_GOTENT
4366 ENUMDOC
4367   32 bit rel. offset to GOT entry.
4368 ENUM
4369   BFD_RELOC_390_GOTOFF64
4370 ENUMDOC
4371   64 bit offset to GOT.
4372 ENUM
4373   BFD_RELOC_390_GOTPLT12
4374 ENUMDOC
4375   12-bit offset to symbol-entry within GOT, with PLT handling.
4376 ENUM
4377   BFD_RELOC_390_GOTPLT16
4378 ENUMDOC
4379   16-bit offset to symbol-entry within GOT, with PLT handling.
4380 ENUM
4381   BFD_RELOC_390_GOTPLT32
4382 ENUMDOC
4383   32-bit offset to symbol-entry within GOT, with PLT handling.
4384 ENUM
4385   BFD_RELOC_390_GOTPLT64
4386 ENUMDOC
4387   64-bit offset to symbol-entry within GOT, with PLT handling.
4388 ENUM
4389   BFD_RELOC_390_GOTPLTENT
4390 ENUMDOC
4391   32-bit rel. offset to symbol-entry within GOT, with PLT handling.
4392 ENUM
4393   BFD_RELOC_390_PLTOFF16
4394 ENUMDOC
4395   16-bit rel. offset from the GOT to a PLT entry.
4396 ENUM
4397   BFD_RELOC_390_PLTOFF32
4398 ENUMDOC
4399   32-bit rel. offset from the GOT to a PLT entry.
4400 ENUM
4401   BFD_RELOC_390_PLTOFF64
4402 ENUMDOC
4403   64-bit rel. offset from the GOT to a PLT entry.
4404
4405 ENUM
4406   BFD_RELOC_390_TLS_LOAD
4407 ENUMX
4408   BFD_RELOC_390_TLS_GDCALL
4409 ENUMX
4410   BFD_RELOC_390_TLS_LDCALL
4411 ENUMX
4412   BFD_RELOC_390_TLS_GD32
4413 ENUMX
4414   BFD_RELOC_390_TLS_GD64
4415 ENUMX
4416   BFD_RELOC_390_TLS_GOTIE12
4417 ENUMX
4418   BFD_RELOC_390_TLS_GOTIE32
4419 ENUMX
4420   BFD_RELOC_390_TLS_GOTIE64
4421 ENUMX
4422   BFD_RELOC_390_TLS_LDM32
4423 ENUMX
4424   BFD_RELOC_390_TLS_LDM64
4425 ENUMX
4426   BFD_RELOC_390_TLS_IE32
4427 ENUMX
4428   BFD_RELOC_390_TLS_IE64
4429 ENUMX
4430   BFD_RELOC_390_TLS_IEENT
4431 ENUMX
4432   BFD_RELOC_390_TLS_LE32
4433 ENUMX
4434   BFD_RELOC_390_TLS_LE64
4435 ENUMX
4436   BFD_RELOC_390_TLS_LDO32
4437 ENUMX
4438   BFD_RELOC_390_TLS_LDO64
4439 ENUMX
4440   BFD_RELOC_390_TLS_DTPMOD
4441 ENUMX
4442   BFD_RELOC_390_TLS_DTPOFF
4443 ENUMX
4444   BFD_RELOC_390_TLS_TPOFF
4445 ENUMDOC
4446   s390 tls relocations.
4447
4448 ENUM
4449   BFD_RELOC_390_20
4450 ENUMX
4451   BFD_RELOC_390_GOT20
4452 ENUMX
4453   BFD_RELOC_390_GOTPLT20
4454 ENUMX
4455   BFD_RELOC_390_TLS_GOTIE20
4456 ENUMDOC
4457   Long displacement extension.
4458
4459 ENUM
4460   BFD_RELOC_SCORE_GPREL15
4461 ENUMDOC
4462   Score relocations
4463   Low 16 bit for load/store
4464 ENUM
4465   BFD_RELOC_SCORE_DUMMY2
4466 ENUMX
4467   BFD_RELOC_SCORE_JMP
4468 ENUMDOC
4469   This is a 24-bit reloc with the right 1 bit assumed to be 0
4470 ENUM
4471   BFD_RELOC_SCORE_BRANCH
4472 ENUMDOC
4473   This is a 19-bit reloc with the right 1 bit assumed to be 0
4474 ENUM
4475   BFD_RELOC_SCORE_IMM30
4476 ENUMDOC
4477   This is a 32-bit reloc for 48-bit instructions.
4478 ENUM
4479   BFD_RELOC_SCORE_IMM32
4480 ENUMDOC
4481   This is a 32-bit reloc for 48-bit instructions.
4482 ENUM
4483   BFD_RELOC_SCORE16_JMP
4484 ENUMDOC
4485   This is a 11-bit reloc with the right 1 bit assumed to be 0
4486 ENUM
4487   BFD_RELOC_SCORE16_BRANCH
4488 ENUMDOC
4489   This is a 8-bit reloc with the right 1 bit assumed to be 0
4490 ENUM
4491   BFD_RELOC_SCORE_BCMP
4492 ENUMDOC
4493    This is a 9-bit reloc with the right 1 bit assumed to be 0
4494 ENUM
4495   BFD_RELOC_SCORE_GOT15
4496 ENUMX
4497   BFD_RELOC_SCORE_GOT_LO16
4498 ENUMX
4499   BFD_RELOC_SCORE_CALL15
4500 ENUMX
4501   BFD_RELOC_SCORE_DUMMY_HI16
4502 ENUMDOC
4503   Undocumented Score relocs
4504
4505 ENUM
4506   BFD_RELOC_IP2K_FR9
4507 ENUMDOC
4508   Scenix IP2K - 9-bit register number / data address
4509 ENUM
4510   BFD_RELOC_IP2K_BANK
4511 ENUMDOC
4512   Scenix IP2K - 4-bit register/data bank number
4513 ENUM
4514   BFD_RELOC_IP2K_ADDR16CJP
4515 ENUMDOC
4516   Scenix IP2K - low 13 bits of instruction word address
4517 ENUM
4518   BFD_RELOC_IP2K_PAGE3
4519 ENUMDOC
4520   Scenix IP2K - high 3 bits of instruction word address
4521 ENUM
4522   BFD_RELOC_IP2K_LO8DATA
4523 ENUMX
4524   BFD_RELOC_IP2K_HI8DATA
4525 ENUMX
4526   BFD_RELOC_IP2K_EX8DATA
4527 ENUMDOC
4528   Scenix IP2K - ext/low/high 8 bits of data address
4529 ENUM
4530   BFD_RELOC_IP2K_LO8INSN
4531 ENUMX
4532   BFD_RELOC_IP2K_HI8INSN
4533 ENUMDOC
4534   Scenix IP2K - low/high 8 bits of instruction word address
4535 ENUM
4536   BFD_RELOC_IP2K_PC_SKIP
4537 ENUMDOC
4538   Scenix IP2K - even/odd PC modifier to modify snb pcl.0
4539 ENUM
4540   BFD_RELOC_IP2K_TEXT
4541 ENUMDOC
4542   Scenix IP2K - 16 bit word address in text section.
4543 ENUM
4544   BFD_RELOC_IP2K_FR_OFFSET
4545 ENUMDOC
4546   Scenix IP2K - 7-bit sp or dp offset
4547 ENUM
4548   BFD_RELOC_VPE4KMATH_DATA
4549 ENUMX
4550   BFD_RELOC_VPE4KMATH_INSN
4551 ENUMDOC
4552   Scenix VPE4K coprocessor - data/insn-space addressing
4553
4554 ENUM
4555   BFD_RELOC_VTABLE_INHERIT
4556 ENUMX
4557   BFD_RELOC_VTABLE_ENTRY
4558 ENUMDOC
4559   These two relocations are used by the linker to determine which of
4560   the entries in a C++ virtual function table are actually used.  When
4561   the --gc-sections option is given, the linker will zero out the entries
4562   that are not used, so that the code for those functions need not be
4563   included in the output.
4564
4565   VTABLE_INHERIT is a zero-space relocation used to describe to the
4566   linker the inheritance tree of a C++ virtual function table.  The
4567   relocation's symbol should be the parent class' vtable, and the
4568   relocation should be located at the child vtable.
4569
4570   VTABLE_ENTRY is a zero-space relocation that describes the use of a
4571   virtual function table entry.  The reloc's symbol should refer to the
4572   table of the class mentioned in the code.  Off of that base, an offset
4573   describes the entry that is being used.  For Rela hosts, this offset
4574   is stored in the reloc's addend.  For Rel hosts, we are forced to put
4575   this offset in the reloc's section offset.
4576
4577 ENUM
4578   BFD_RELOC_IA64_IMM14
4579 ENUMX
4580   BFD_RELOC_IA64_IMM22
4581 ENUMX
4582   BFD_RELOC_IA64_IMM64
4583 ENUMX
4584   BFD_RELOC_IA64_DIR32MSB
4585 ENUMX
4586   BFD_RELOC_IA64_DIR32LSB
4587 ENUMX
4588   BFD_RELOC_IA64_DIR64MSB
4589 ENUMX
4590   BFD_RELOC_IA64_DIR64LSB
4591 ENUMX
4592   BFD_RELOC_IA64_GPREL22
4593 ENUMX
4594   BFD_RELOC_IA64_GPREL64I
4595 ENUMX
4596   BFD_RELOC_IA64_GPREL32MSB
4597 ENUMX
4598   BFD_RELOC_IA64_GPREL32LSB
4599 ENUMX
4600   BFD_RELOC_IA64_GPREL64MSB
4601 ENUMX
4602   BFD_RELOC_IA64_GPREL64LSB
4603 ENUMX
4604   BFD_RELOC_IA64_LTOFF22
4605 ENUMX
4606   BFD_RELOC_IA64_LTOFF64I
4607 ENUMX
4608   BFD_RELOC_IA64_PLTOFF22
4609 ENUMX
4610   BFD_RELOC_IA64_PLTOFF64I
4611 ENUMX
4612   BFD_RELOC_IA64_PLTOFF64MSB
4613 ENUMX
4614   BFD_RELOC_IA64_PLTOFF64LSB
4615 ENUMX
4616   BFD_RELOC_IA64_FPTR64I
4617 ENUMX
4618   BFD_RELOC_IA64_FPTR32MSB
4619 ENUMX
4620   BFD_RELOC_IA64_FPTR32LSB
4621 ENUMX
4622   BFD_RELOC_IA64_FPTR64MSB
4623 ENUMX
4624   BFD_RELOC_IA64_FPTR64LSB
4625 ENUMX
4626   BFD_RELOC_IA64_PCREL21B
4627 ENUMX
4628   BFD_RELOC_IA64_PCREL21BI
4629 ENUMX
4630   BFD_RELOC_IA64_PCREL21M
4631 ENUMX
4632   BFD_RELOC_IA64_PCREL21F
4633 ENUMX
4634   BFD_RELOC_IA64_PCREL22
4635 ENUMX
4636   BFD_RELOC_IA64_PCREL60B
4637 ENUMX
4638   BFD_RELOC_IA64_PCREL64I
4639 ENUMX
4640   BFD_RELOC_IA64_PCREL32MSB
4641 ENUMX
4642   BFD_RELOC_IA64_PCREL32LSB
4643 ENUMX
4644   BFD_RELOC_IA64_PCREL64MSB
4645 ENUMX
4646   BFD_RELOC_IA64_PCREL64LSB
4647 ENUMX
4648   BFD_RELOC_IA64_LTOFF_FPTR22
4649 ENUMX
4650   BFD_RELOC_IA64_LTOFF_FPTR64I
4651 ENUMX
4652   BFD_RELOC_IA64_LTOFF_FPTR32MSB
4653 ENUMX
4654   BFD_RELOC_IA64_LTOFF_FPTR32LSB
4655 ENUMX
4656   BFD_RELOC_IA64_LTOFF_FPTR64MSB
4657 ENUMX
4658   BFD_RELOC_IA64_LTOFF_FPTR64LSB
4659 ENUMX
4660   BFD_RELOC_IA64_SEGREL32MSB
4661 ENUMX
4662   BFD_RELOC_IA64_SEGREL32LSB
4663 ENUMX
4664   BFD_RELOC_IA64_SEGREL64MSB
4665 ENUMX
4666   BFD_RELOC_IA64_SEGREL64LSB
4667 ENUMX
4668   BFD_RELOC_IA64_SECREL32MSB
4669 ENUMX
4670   BFD_RELOC_IA64_SECREL32LSB
4671 ENUMX
4672   BFD_RELOC_IA64_SECREL64MSB
4673 ENUMX
4674   BFD_RELOC_IA64_SECREL64LSB
4675 ENUMX
4676   BFD_RELOC_IA64_REL32MSB
4677 ENUMX
4678   BFD_RELOC_IA64_REL32LSB
4679 ENUMX
4680   BFD_RELOC_IA64_REL64MSB
4681 ENUMX
4682   BFD_RELOC_IA64_REL64LSB
4683 ENUMX
4684   BFD_RELOC_IA64_LTV32MSB
4685 ENUMX
4686   BFD_RELOC_IA64_LTV32LSB
4687 ENUMX
4688   BFD_RELOC_IA64_LTV64MSB
4689 ENUMX
4690   BFD_RELOC_IA64_LTV64LSB
4691 ENUMX
4692   BFD_RELOC_IA64_IPLTMSB
4693 ENUMX
4694   BFD_RELOC_IA64_IPLTLSB
4695 ENUMX
4696   BFD_RELOC_IA64_COPY
4697 ENUMX
4698   BFD_RELOC_IA64_LTOFF22X
4699 ENUMX
4700   BFD_RELOC_IA64_LDXMOV
4701 ENUMX
4702   BFD_RELOC_IA64_TPREL14
4703 ENUMX
4704   BFD_RELOC_IA64_TPREL22
4705 ENUMX
4706   BFD_RELOC_IA64_TPREL64I
4707 ENUMX
4708   BFD_RELOC_IA64_TPREL64MSB
4709 ENUMX
4710   BFD_RELOC_IA64_TPREL64LSB
4711 ENUMX
4712   BFD_RELOC_IA64_LTOFF_TPREL22
4713 ENUMX
4714   BFD_RELOC_IA64_DTPMOD64MSB
4715 ENUMX
4716   BFD_RELOC_IA64_DTPMOD64LSB
4717 ENUMX
4718   BFD_RELOC_IA64_LTOFF_DTPMOD22
4719 ENUMX
4720   BFD_RELOC_IA64_DTPREL14
4721 ENUMX
4722   BFD_RELOC_IA64_DTPREL22
4723 ENUMX
4724   BFD_RELOC_IA64_DTPREL64I
4725 ENUMX
4726   BFD_RELOC_IA64_DTPREL32MSB
4727 ENUMX
4728   BFD_RELOC_IA64_DTPREL32LSB
4729 ENUMX
4730   BFD_RELOC_IA64_DTPREL64MSB
4731 ENUMX
4732   BFD_RELOC_IA64_DTPREL64LSB
4733 ENUMX
4734   BFD_RELOC_IA64_LTOFF_DTPREL22
4735 ENUMDOC
4736   Intel IA64 Relocations.
4737
4738 ENUM
4739   BFD_RELOC_M68HC11_HI8
4740 ENUMDOC
4741   Motorola 68HC11 reloc.
4742   This is the 8 bit high part of an absolute address.
4743 ENUM
4744   BFD_RELOC_M68HC11_LO8
4745 ENUMDOC
4746   Motorola 68HC11 reloc.
4747   This is the 8 bit low part of an absolute address.
4748 ENUM
4749   BFD_RELOC_M68HC11_3B
4750 ENUMDOC
4751   Motorola 68HC11 reloc.
4752   This is the 3 bit of a value.
4753 ENUM
4754   BFD_RELOC_M68HC11_RL_JUMP
4755 ENUMDOC
4756   Motorola 68HC11 reloc.
4757   This reloc marks the beginning of a jump/call instruction.
4758   It is used for linker relaxation to correctly identify beginning
4759   of instruction and change some branches to use PC-relative
4760   addressing mode.
4761 ENUM
4762   BFD_RELOC_M68HC11_RL_GROUP
4763 ENUMDOC
4764   Motorola 68HC11 reloc.
4765   This reloc marks a group of several instructions that gcc generates
4766   and for which the linker relaxation pass can modify and/or remove
4767   some of them.
4768 ENUM
4769   BFD_RELOC_M68HC11_LO16
4770 ENUMDOC
4771   Motorola 68HC11 reloc.
4772   This is the 16-bit lower part of an address.  It is used for 'call'
4773   instruction to specify the symbol address without any special
4774   transformation (due to memory bank window).
4775 ENUM
4776   BFD_RELOC_M68HC11_PAGE
4777 ENUMDOC
4778   Motorola 68HC11 reloc.
4779   This is a 8-bit reloc that specifies the page number of an address.
4780   It is used by 'call' instruction to specify the page number of
4781   the symbol.
4782 ENUM
4783   BFD_RELOC_M68HC11_24
4784 ENUMDOC
4785   Motorola 68HC11 reloc.
4786   This is a 24-bit reloc that represents the address with a 16-bit
4787   value and a 8-bit page number.  The symbol address is transformed
4788   to follow the 16K memory bank of 68HC12 (seen as mapped in the window).
4789 ENUM
4790   BFD_RELOC_M68HC12_5B
4791 ENUMDOC
4792   Motorola 68HC12 reloc.
4793   This is the 5 bits of a value.
4794
4795 ENUM
4796   BFD_RELOC_16C_NUM08
4797 ENUMX
4798   BFD_RELOC_16C_NUM08_C
4799 ENUMX
4800   BFD_RELOC_16C_NUM16
4801 ENUMX
4802   BFD_RELOC_16C_NUM16_C
4803 ENUMX
4804   BFD_RELOC_16C_NUM32
4805 ENUMX
4806   BFD_RELOC_16C_NUM32_C
4807 ENUMX
4808   BFD_RELOC_16C_DISP04
4809 ENUMX
4810   BFD_RELOC_16C_DISP04_C
4811 ENUMX
4812   BFD_RELOC_16C_DISP08
4813 ENUMX
4814   BFD_RELOC_16C_DISP08_C
4815 ENUMX
4816   BFD_RELOC_16C_DISP16
4817 ENUMX
4818   BFD_RELOC_16C_DISP16_C
4819 ENUMX
4820   BFD_RELOC_16C_DISP24
4821 ENUMX
4822   BFD_RELOC_16C_DISP24_C
4823 ENUMX
4824   BFD_RELOC_16C_DISP24a
4825 ENUMX
4826   BFD_RELOC_16C_DISP24a_C
4827 ENUMX
4828   BFD_RELOC_16C_REG04
4829 ENUMX
4830   BFD_RELOC_16C_REG04_C
4831 ENUMX
4832   BFD_RELOC_16C_REG04a
4833 ENUMX
4834   BFD_RELOC_16C_REG04a_C
4835 ENUMX
4836   BFD_RELOC_16C_REG14
4837 ENUMX
4838   BFD_RELOC_16C_REG14_C
4839 ENUMX
4840   BFD_RELOC_16C_REG16
4841 ENUMX
4842   BFD_RELOC_16C_REG16_C
4843 ENUMX
4844   BFD_RELOC_16C_REG20
4845 ENUMX
4846   BFD_RELOC_16C_REG20_C
4847 ENUMX
4848   BFD_RELOC_16C_ABS20
4849 ENUMX
4850   BFD_RELOC_16C_ABS20_C
4851 ENUMX
4852   BFD_RELOC_16C_ABS24
4853 ENUMX
4854   BFD_RELOC_16C_ABS24_C
4855 ENUMX
4856   BFD_RELOC_16C_IMM04
4857 ENUMX
4858   BFD_RELOC_16C_IMM04_C
4859 ENUMX
4860   BFD_RELOC_16C_IMM16
4861 ENUMX
4862   BFD_RELOC_16C_IMM16_C
4863 ENUMX
4864   BFD_RELOC_16C_IMM20
4865 ENUMX
4866   BFD_RELOC_16C_IMM20_C
4867 ENUMX
4868   BFD_RELOC_16C_IMM24
4869 ENUMX
4870   BFD_RELOC_16C_IMM24_C
4871 ENUMX
4872   BFD_RELOC_16C_IMM32
4873 ENUMX
4874   BFD_RELOC_16C_IMM32_C
4875 ENUMDOC
4876   NS CR16C Relocations.
4877
4878 ENUM
4879   BFD_RELOC_CR16_NUM8
4880 ENUMX
4881   BFD_RELOC_CR16_NUM16
4882 ENUMX
4883   BFD_RELOC_CR16_NUM32
4884 ENUMX
4885   BFD_RELOC_CR16_NUM32a
4886 ENUMX
4887   BFD_RELOC_CR16_REGREL0
4888 ENUMX
4889   BFD_RELOC_CR16_REGREL4
4890 ENUMX
4891   BFD_RELOC_CR16_REGREL4a
4892 ENUMX
4893   BFD_RELOC_CR16_REGREL14
4894 ENUMX
4895   BFD_RELOC_CR16_REGREL14a
4896 ENUMX
4897   BFD_RELOC_CR16_REGREL16
4898 ENUMX
4899   BFD_RELOC_CR16_REGREL20
4900 ENUMX
4901   BFD_RELOC_CR16_REGREL20a
4902 ENUMX
4903   BFD_RELOC_CR16_ABS20
4904 ENUMX
4905   BFD_RELOC_CR16_ABS24
4906 ENUMX
4907   BFD_RELOC_CR16_IMM4
4908 ENUMX
4909   BFD_RELOC_CR16_IMM8
4910 ENUMX
4911   BFD_RELOC_CR16_IMM16
4912 ENUMX
4913   BFD_RELOC_CR16_IMM20
4914 ENUMX
4915   BFD_RELOC_CR16_IMM24
4916 ENUMX
4917   BFD_RELOC_CR16_IMM32
4918 ENUMX
4919   BFD_RELOC_CR16_IMM32a
4920 ENUMX
4921   BFD_RELOC_CR16_DISP4
4922 ENUMX
4923   BFD_RELOC_CR16_DISP8
4924 ENUMX
4925   BFD_RELOC_CR16_DISP16
4926 ENUMX
4927   BFD_RELOC_CR16_DISP20
4928 ENUMX
4929   BFD_RELOC_CR16_DISP24
4930 ENUMX
4931   BFD_RELOC_CR16_DISP24a
4932 ENUMX
4933   BFD_RELOC_CR16_SWITCH8
4934 ENUMX
4935   BFD_RELOC_CR16_SWITCH16
4936 ENUMX
4937   BFD_RELOC_CR16_SWITCH32
4938 ENUMX
4939   BFD_RELOC_CR16_GOT_REGREL20
4940 ENUMX
4941   BFD_RELOC_CR16_GOTC_REGREL20
4942 ENUMX
4943   BFD_RELOC_CR16_GLOB_DAT
4944 ENUMDOC
4945   NS CR16 Relocations.
4946
4947 ENUM
4948   BFD_RELOC_CRX_REL4
4949 ENUMX
4950   BFD_RELOC_CRX_REL8
4951 ENUMX
4952   BFD_RELOC_CRX_REL8_CMP
4953 ENUMX
4954   BFD_RELOC_CRX_REL16
4955 ENUMX
4956   BFD_RELOC_CRX_REL24
4957 ENUMX
4958   BFD_RELOC_CRX_REL32
4959 ENUMX
4960   BFD_RELOC_CRX_REGREL12
4961 ENUMX
4962   BFD_RELOC_CRX_REGREL22
4963 ENUMX
4964   BFD_RELOC_CRX_REGREL28
4965 ENUMX
4966   BFD_RELOC_CRX_REGREL32
4967 ENUMX
4968   BFD_RELOC_CRX_ABS16
4969 ENUMX
4970   BFD_RELOC_CRX_ABS32
4971 ENUMX
4972   BFD_RELOC_CRX_NUM8
4973 ENUMX
4974   BFD_RELOC_CRX_NUM16
4975 ENUMX
4976   BFD_RELOC_CRX_NUM32
4977 ENUMX
4978   BFD_RELOC_CRX_IMM16
4979 ENUMX
4980   BFD_RELOC_CRX_IMM32
4981 ENUMX
4982   BFD_RELOC_CRX_SWITCH8
4983 ENUMX
4984   BFD_RELOC_CRX_SWITCH16
4985 ENUMX
4986   BFD_RELOC_CRX_SWITCH32
4987 ENUMDOC
4988   NS CRX Relocations.
4989
4990 ENUM
4991   BFD_RELOC_CRIS_BDISP8
4992 ENUMX
4993   BFD_RELOC_CRIS_UNSIGNED_5
4994 ENUMX
4995   BFD_RELOC_CRIS_SIGNED_6
4996 ENUMX
4997   BFD_RELOC_CRIS_UNSIGNED_6
4998 ENUMX
4999   BFD_RELOC_CRIS_SIGNED_8
5000 ENUMX
5001   BFD_RELOC_CRIS_UNSIGNED_8
5002 ENUMX
5003   BFD_RELOC_CRIS_SIGNED_16
5004 ENUMX
5005   BFD_RELOC_CRIS_UNSIGNED_16
5006 ENUMX
5007   BFD_RELOC_CRIS_LAPCQ_OFFSET
5008 ENUMX
5009   BFD_RELOC_CRIS_UNSIGNED_4
5010 ENUMDOC
5011   These relocs are only used within the CRIS assembler.  They are not
5012   (at present) written to any object files.
5013 ENUM
5014   BFD_RELOC_CRIS_COPY
5015 ENUMX
5016   BFD_RELOC_CRIS_GLOB_DAT
5017 ENUMX
5018   BFD_RELOC_CRIS_JUMP_SLOT
5019 ENUMX
5020   BFD_RELOC_CRIS_RELATIVE
5021 ENUMDOC
5022   Relocs used in ELF shared libraries for CRIS.
5023 ENUM
5024   BFD_RELOC_CRIS_32_GOT
5025 ENUMDOC
5026   32-bit offset to symbol-entry within GOT.
5027 ENUM
5028   BFD_RELOC_CRIS_16_GOT
5029 ENUMDOC
5030   16-bit offset to symbol-entry within GOT.
5031 ENUM
5032   BFD_RELOC_CRIS_32_GOTPLT
5033 ENUMDOC
5034   32-bit offset to symbol-entry within GOT, with PLT handling.
5035 ENUM
5036   BFD_RELOC_CRIS_16_GOTPLT
5037 ENUMDOC
5038   16-bit offset to symbol-entry within GOT, with PLT handling.
5039 ENUM
5040   BFD_RELOC_CRIS_32_GOTREL
5041 ENUMDOC
5042   32-bit offset to symbol, relative to GOT.
5043 ENUM
5044   BFD_RELOC_CRIS_32_PLT_GOTREL
5045 ENUMDOC
5046   32-bit offset to symbol with PLT entry, relative to GOT.
5047 ENUM
5048   BFD_RELOC_CRIS_32_PLT_PCREL
5049 ENUMDOC
5050   32-bit offset to symbol with PLT entry, relative to this relocation.
5051
5052 ENUM
5053   BFD_RELOC_CRIS_32_GOT_GD
5054 ENUMX
5055   BFD_RELOC_CRIS_16_GOT_GD
5056 ENUMX
5057   BFD_RELOC_CRIS_32_GD
5058 ENUMX
5059   BFD_RELOC_CRIS_DTP
5060 ENUMX
5061   BFD_RELOC_CRIS_32_DTPREL
5062 ENUMX
5063   BFD_RELOC_CRIS_16_DTPREL
5064 ENUMX
5065   BFD_RELOC_CRIS_32_GOT_TPREL
5066 ENUMX
5067   BFD_RELOC_CRIS_16_GOT_TPREL
5068 ENUMX
5069   BFD_RELOC_CRIS_32_TPREL
5070 ENUMX
5071   BFD_RELOC_CRIS_16_TPREL
5072 ENUMX
5073   BFD_RELOC_CRIS_DTPMOD
5074 ENUMX
5075   BFD_RELOC_CRIS_32_IE
5076 ENUMDOC
5077   Relocs used in TLS code for CRIS.
5078
5079 ENUM
5080   BFD_RELOC_860_COPY
5081 ENUMX
5082   BFD_RELOC_860_GLOB_DAT
5083 ENUMX
5084   BFD_RELOC_860_JUMP_SLOT
5085 ENUMX
5086   BFD_RELOC_860_RELATIVE
5087 ENUMX
5088   BFD_RELOC_860_PC26
5089 ENUMX
5090   BFD_RELOC_860_PLT26
5091 ENUMX
5092   BFD_RELOC_860_PC16
5093 ENUMX
5094   BFD_RELOC_860_LOW0
5095 ENUMX
5096   BFD_RELOC_860_SPLIT0
5097 ENUMX
5098   BFD_RELOC_860_LOW1
5099 ENUMX
5100   BFD_RELOC_860_SPLIT1
5101 ENUMX
5102   BFD_RELOC_860_LOW2
5103 ENUMX
5104   BFD_RELOC_860_SPLIT2
5105 ENUMX
5106   BFD_RELOC_860_LOW3
5107 ENUMX
5108   BFD_RELOC_860_LOGOT0
5109 ENUMX
5110   BFD_RELOC_860_SPGOT0
5111 ENUMX
5112   BFD_RELOC_860_LOGOT1
5113 ENUMX
5114   BFD_RELOC_860_SPGOT1
5115 ENUMX
5116   BFD_RELOC_860_LOGOTOFF0
5117 ENUMX
5118   BFD_RELOC_860_SPGOTOFF0
5119 ENUMX
5120   BFD_RELOC_860_LOGOTOFF1
5121 ENUMX
5122   BFD_RELOC_860_SPGOTOFF1
5123 ENUMX
5124   BFD_RELOC_860_LOGOTOFF2
5125 ENUMX
5126   BFD_RELOC_860_LOGOTOFF3
5127 ENUMX
5128   BFD_RELOC_860_LOPC
5129 ENUMX
5130   BFD_RELOC_860_HIGHADJ
5131 ENUMX
5132   BFD_RELOC_860_HAGOT
5133 ENUMX
5134   BFD_RELOC_860_HAGOTOFF
5135 ENUMX
5136   BFD_RELOC_860_HAPC
5137 ENUMX
5138   BFD_RELOC_860_HIGH
5139 ENUMX
5140   BFD_RELOC_860_HIGOT
5141 ENUMX
5142   BFD_RELOC_860_HIGOTOFF
5143 ENUMDOC
5144   Intel i860 Relocations.
5145
5146 ENUM
5147   BFD_RELOC_OPENRISC_ABS_26
5148 ENUMX
5149   BFD_RELOC_OPENRISC_REL_26
5150 ENUMDOC
5151   OpenRISC Relocations.
5152
5153 ENUM
5154   BFD_RELOC_H8_DIR16A8
5155 ENUMX
5156   BFD_RELOC_H8_DIR16R8
5157 ENUMX
5158   BFD_RELOC_H8_DIR24A8
5159 ENUMX
5160   BFD_RELOC_H8_DIR24R8
5161 ENUMX
5162   BFD_RELOC_H8_DIR32A16
5163 ENUMDOC
5164   H8 elf Relocations.
5165
5166 ENUM
5167   BFD_RELOC_XSTORMY16_REL_12
5168 ENUMX
5169   BFD_RELOC_XSTORMY16_12
5170 ENUMX
5171   BFD_RELOC_XSTORMY16_24
5172 ENUMX
5173   BFD_RELOC_XSTORMY16_FPTR16
5174 ENUMDOC
5175   Sony Xstormy16 Relocations.
5176
5177 ENUM
5178   BFD_RELOC_RELC
5179 ENUMDOC
5180   Self-describing complex relocations.
5181 COMMENT
5182
5183 ENUM
5184   BFD_RELOC_XC16X_PAG
5185 ENUMX
5186   BFD_RELOC_XC16X_POF
5187 ENUMX
5188   BFD_RELOC_XC16X_SEG
5189 ENUMX
5190   BFD_RELOC_XC16X_SOF
5191 ENUMDOC
5192   Infineon Relocations.
5193
5194 ENUM
5195   BFD_RELOC_VAX_GLOB_DAT
5196 ENUMX
5197   BFD_RELOC_VAX_JMP_SLOT
5198 ENUMX
5199   BFD_RELOC_VAX_RELATIVE
5200 ENUMDOC
5201   Relocations used by VAX ELF.
5202
5203 ENUM
5204   BFD_RELOC_MT_PC16
5205 ENUMDOC
5206   Morpho MT - 16 bit immediate relocation.
5207 ENUM
5208   BFD_RELOC_MT_HI16
5209 ENUMDOC
5210   Morpho MT - Hi 16 bits of an address.
5211 ENUM
5212   BFD_RELOC_MT_LO16
5213 ENUMDOC
5214   Morpho MT - Low 16 bits of an address.
5215 ENUM
5216   BFD_RELOC_MT_GNU_VTINHERIT
5217 ENUMDOC
5218   Morpho MT - Used to tell the linker which vtable entries are used.
5219 ENUM
5220   BFD_RELOC_MT_GNU_VTENTRY
5221 ENUMDOC
5222   Morpho MT - Used to tell the linker which vtable entries are used.
5223 ENUM
5224   BFD_RELOC_MT_PCINSN8
5225 ENUMDOC
5226   Morpho MT - 8 bit immediate relocation.
5227
5228 ENUM
5229   BFD_RELOC_MSP430_10_PCREL
5230 ENUMX
5231   BFD_RELOC_MSP430_16_PCREL
5232 ENUMX
5233   BFD_RELOC_MSP430_16
5234 ENUMX
5235   BFD_RELOC_MSP430_16_PCREL_BYTE
5236 ENUMX
5237   BFD_RELOC_MSP430_16_BYTE
5238 ENUMX
5239   BFD_RELOC_MSP430_2X_PCREL
5240 ENUMX
5241   BFD_RELOC_MSP430_RL_PCREL
5242 ENUMDOC
5243   msp430 specific relocation codes
5244
5245 ENUM
5246   BFD_RELOC_IQ2000_OFFSET_16
5247 ENUMX
5248   BFD_RELOC_IQ2000_OFFSET_21
5249 ENUMX
5250   BFD_RELOC_IQ2000_UHI16
5251 ENUMDOC
5252   IQ2000 Relocations.
5253
5254 ENUM
5255   BFD_RELOC_XTENSA_RTLD
5256 ENUMDOC
5257   Special Xtensa relocation used only by PLT entries in ELF shared
5258   objects to indicate that the runtime linker should set the value
5259   to one of its own internal functions or data structures.
5260 ENUM
5261   BFD_RELOC_XTENSA_GLOB_DAT
5262 ENUMX
5263   BFD_RELOC_XTENSA_JMP_SLOT
5264 ENUMX
5265   BFD_RELOC_XTENSA_RELATIVE
5266 ENUMDOC
5267   Xtensa relocations for ELF shared objects.
5268 ENUM
5269   BFD_RELOC_XTENSA_PLT
5270 ENUMDOC
5271   Xtensa relocation used in ELF object files for symbols that may require
5272   PLT entries.  Otherwise, this is just a generic 32-bit relocation.
5273 ENUM
5274   BFD_RELOC_XTENSA_DIFF8
5275 ENUMX
5276   BFD_RELOC_XTENSA_DIFF16
5277 ENUMX
5278   BFD_RELOC_XTENSA_DIFF32
5279 ENUMDOC
5280   Xtensa relocations to mark the difference of two local symbols.
5281   These are only needed to support linker relaxation and can be ignored
5282   when not relaxing.  The field is set to the value of the difference
5283   assuming no relaxation.  The relocation encodes the position of the
5284   first symbol so the linker can determine whether to adjust the field
5285   value.
5286 ENUM
5287   BFD_RELOC_XTENSA_SLOT0_OP
5288 ENUMX
5289   BFD_RELOC_XTENSA_SLOT1_OP
5290 ENUMX
5291   BFD_RELOC_XTENSA_SLOT2_OP
5292 ENUMX
5293   BFD_RELOC_XTENSA_SLOT3_OP
5294 ENUMX
5295   BFD_RELOC_XTENSA_SLOT4_OP
5296 ENUMX
5297   BFD_RELOC_XTENSA_SLOT5_OP
5298 ENUMX
5299   BFD_RELOC_XTENSA_SLOT6_OP
5300 ENUMX
5301   BFD_RELOC_XTENSA_SLOT7_OP
5302 ENUMX
5303   BFD_RELOC_XTENSA_SLOT8_OP
5304 ENUMX
5305   BFD_RELOC_XTENSA_SLOT9_OP
5306 ENUMX
5307   BFD_RELOC_XTENSA_SLOT10_OP
5308 ENUMX
5309   BFD_RELOC_XTENSA_SLOT11_OP
5310 ENUMX
5311   BFD_RELOC_XTENSA_SLOT12_OP
5312 ENUMX
5313   BFD_RELOC_XTENSA_SLOT13_OP
5314 ENUMX
5315   BFD_RELOC_XTENSA_SLOT14_OP
5316 ENUMDOC
5317   Generic Xtensa relocations for instruction operands.  Only the slot
5318   number is encoded in the relocation.  The relocation applies to the
5319   last PC-relative immediate operand, or if there are no PC-relative
5320   immediates, to the last immediate operand.
5321 ENUM
5322   BFD_RELOC_XTENSA_SLOT0_ALT
5323 ENUMX
5324   BFD_RELOC_XTENSA_SLOT1_ALT
5325 ENUMX
5326   BFD_RELOC_XTENSA_SLOT2_ALT
5327 ENUMX
5328   BFD_RELOC_XTENSA_SLOT3_ALT
5329 ENUMX
5330   BFD_RELOC_XTENSA_SLOT4_ALT
5331 ENUMX
5332   BFD_RELOC_XTENSA_SLOT5_ALT
5333 ENUMX
5334   BFD_RELOC_XTENSA_SLOT6_ALT
5335 ENUMX
5336   BFD_RELOC_XTENSA_SLOT7_ALT
5337 ENUMX
5338   BFD_RELOC_XTENSA_SLOT8_ALT
5339 ENUMX
5340   BFD_RELOC_XTENSA_SLOT9_ALT
5341 ENUMX
5342   BFD_RELOC_XTENSA_SLOT10_ALT
5343 ENUMX
5344   BFD_RELOC_XTENSA_SLOT11_ALT
5345 ENUMX
5346   BFD_RELOC_XTENSA_SLOT12_ALT
5347 ENUMX
5348   BFD_RELOC_XTENSA_SLOT13_ALT
5349 ENUMX
5350   BFD_RELOC_XTENSA_SLOT14_ALT
5351 ENUMDOC
5352   Alternate Xtensa relocations.  Only the slot is encoded in the
5353   relocation.  The meaning of these relocations is opcode-specific.
5354 ENUM
5355   BFD_RELOC_XTENSA_OP0
5356 ENUMX
5357   BFD_RELOC_XTENSA_OP1
5358 ENUMX
5359   BFD_RELOC_XTENSA_OP2
5360 ENUMDOC
5361   Xtensa relocations for backward compatibility.  These have all been
5362   replaced by BFD_RELOC_XTENSA_SLOT0_OP.
5363 ENUM
5364   BFD_RELOC_XTENSA_ASM_EXPAND
5365 ENUMDOC
5366   Xtensa relocation to mark that the assembler expanded the
5367   instructions from an original target.  The expansion size is
5368   encoded in the reloc size.
5369 ENUM
5370   BFD_RELOC_XTENSA_ASM_SIMPLIFY
5371 ENUMDOC
5372   Xtensa relocation to mark that the linker should simplify
5373   assembler-expanded instructions.  This is commonly used
5374   internally by the linker after analysis of a
5375   BFD_RELOC_XTENSA_ASM_EXPAND.
5376 ENUM
5377   BFD_RELOC_XTENSA_TLSDESC_FN
5378 ENUMX
5379   BFD_RELOC_XTENSA_TLSDESC_ARG
5380 ENUMX
5381   BFD_RELOC_XTENSA_TLS_DTPOFF
5382 ENUMX
5383   BFD_RELOC_XTENSA_TLS_TPOFF
5384 ENUMX
5385   BFD_RELOC_XTENSA_TLS_FUNC
5386 ENUMX
5387   BFD_RELOC_XTENSA_TLS_ARG
5388 ENUMX
5389   BFD_RELOC_XTENSA_TLS_CALL
5390 ENUMDOC
5391   Xtensa TLS relocations.
5392
5393 ENUM
5394   BFD_RELOC_Z80_DISP8
5395 ENUMDOC
5396   8 bit signed offset in (ix+d) or (iy+d).
5397
5398 ENUM
5399   BFD_RELOC_Z8K_DISP7
5400 ENUMDOC
5401   DJNZ offset.
5402 ENUM
5403   BFD_RELOC_Z8K_CALLR
5404 ENUMDOC
5405   CALR offset.
5406 ENUM
5407   BFD_RELOC_Z8K_IMM4L
5408 ENUMDOC
5409   4 bit value.
5410
5411 ENUM
5412    BFD_RELOC_LM32_CALL
5413 ENUMX
5414    BFD_RELOC_LM32_BRANCH
5415 ENUMX
5416    BFD_RELOC_LM32_16_GOT
5417 ENUMX
5418    BFD_RELOC_LM32_GOTOFF_HI16
5419 ENUMX
5420    BFD_RELOC_LM32_GOTOFF_LO16
5421 ENUMX
5422    BFD_RELOC_LM32_COPY
5423 ENUMX
5424    BFD_RELOC_LM32_GLOB_DAT
5425 ENUMX
5426    BFD_RELOC_LM32_JMP_SLOT
5427 ENUMX
5428    BFD_RELOC_LM32_RELATIVE
5429 ENUMDOC
5430  Lattice Mico32 relocations.
5431
5432 ENUM
5433   BFD_RELOC_MACH_O_SECTDIFF
5434 ENUMDOC
5435   Difference between two section addreses.  Must be followed by a
5436   BFD_RELOC_MACH_O_PAIR.
5437 ENUM
5438   BFD_RELOC_MACH_O_PAIR
5439 ENUMDOC
5440   Pair of relocation.  Contains the first symbol.
5441
5442 ENUM
5443   BFD_RELOC_MACH_O_X86_64_BRANCH32
5444 ENUMX
5445   BFD_RELOC_MACH_O_X86_64_BRANCH8
5446 ENUMDOC
5447   PCREL relocations.  They are marked as branch to create PLT entry if
5448   required.
5449 ENUM
5450   BFD_RELOC_MACH_O_X86_64_GOT
5451 ENUMDOC
5452   Used when referencing a GOT entry.
5453 ENUM
5454   BFD_RELOC_MACH_O_X86_64_GOT_LOAD
5455 ENUMDOC
5456   Used when loading a GOT entry with movq.  It is specially marked so that
5457   the linker could optimize the movq to a leaq if possible.
5458 ENUM
5459   BFD_RELOC_MACH_O_X86_64_SUBTRACTOR32
5460 ENUMDOC
5461   Symbol will be substracted.  Must be followed by a BFD_RELOC_64.
5462 ENUM
5463   BFD_RELOC_MACH_O_X86_64_SUBTRACTOR64
5464 ENUMDOC
5465   Symbol will be substracted.  Must be followed by a BFD_RELOC_64.
5466 ENUM
5467   BFD_RELOC_MACH_O_X86_64_PCREL32_1
5468 ENUMDOC
5469   Same as BFD_RELOC_32_PCREL but with an implicit -1 addend.
5470 ENUM
5471   BFD_RELOC_MACH_O_X86_64_PCREL32_2
5472 ENUMDOC
5473   Same as BFD_RELOC_32_PCREL but with an implicit -2 addend.
5474 ENUM
5475   BFD_RELOC_MACH_O_X86_64_PCREL32_4
5476 ENUMDOC
5477   Same as BFD_RELOC_32_PCREL but with an implicit -4 addend.
5478
5479 ENUM
5480   BFD_RELOC_MICROBLAZE_32_LO
5481 ENUMDOC
5482   This is a 32 bit reloc for the microblaze that stores the
5483   low 16 bits of a value
5484 ENUM
5485   BFD_RELOC_MICROBLAZE_32_LO_PCREL
5486 ENUMDOC
5487   This is a 32 bit pc-relative reloc for the microblaze that
5488   stores the low 16 bits of a value
5489 ENUM
5490   BFD_RELOC_MICROBLAZE_32_ROSDA
5491 ENUMDOC
5492   This is a 32 bit reloc for the microblaze that stores a
5493   value relative to the read-only small data area anchor
5494 ENUM
5495   BFD_RELOC_MICROBLAZE_32_RWSDA
5496 ENUMDOC
5497   This is a 32 bit reloc for the microblaze that stores a
5498   value relative to the read-write small data area anchor
5499 ENUM
5500   BFD_RELOC_MICROBLAZE_32_SYM_OP_SYM
5501 ENUMDOC
5502   This is a 32 bit reloc for the microblaze to handle
5503   expressions of the form "Symbol Op Symbol"
5504 ENUM
5505   BFD_RELOC_MICROBLAZE_64_NONE
5506 ENUMDOC
5507   This is a 64 bit reloc that stores the 32 bit pc relative
5508   value in two words (with an imm instruction).  No relocation is
5509   done here - only used for relaxing
5510 ENUM
5511   BFD_RELOC_MICROBLAZE_64_GOTPC
5512 ENUMDOC
5513   This is a 64 bit reloc that stores the 32 bit pc relative
5514   value in two words (with an imm instruction).  The relocation is
5515   PC-relative GOT offset
5516 ENUM
5517   BFD_RELOC_MICROBLAZE_64_GOT
5518 ENUMDOC
5519   This is a 64 bit reloc that stores the 32 bit pc relative
5520   value in two words (with an imm instruction).  The relocation is
5521   GOT offset
5522 ENUM
5523   BFD_RELOC_MICROBLAZE_64_PLT
5524 ENUMDOC
5525   This is a 64 bit reloc that stores the 32 bit pc relative
5526   value in two words (with an imm instruction).  The relocation is
5527   PC-relative offset into PLT
5528 ENUM
5529   BFD_RELOC_MICROBLAZE_64_GOTOFF
5530 ENUMDOC
5531   This is a 64 bit reloc that stores the 32 bit GOT relative
5532   value in two words (with an imm instruction).  The relocation is
5533   relative offset from _GLOBAL_OFFSET_TABLE_
5534 ENUM
5535   BFD_RELOC_MICROBLAZE_32_GOTOFF
5536 ENUMDOC
5537   This is a 32 bit reloc that stores the 32 bit GOT relative
5538   value in a word.  The relocation is relative offset from
5539   _GLOBAL_OFFSET_TABLE_
5540 ENUM
5541   BFD_RELOC_MICROBLAZE_COPY
5542 ENUMDOC
5543   This is used to tell the dynamic linker to copy the value out of
5544   the dynamic object into the runtime process image.
5545
5546
5547 ENDSENUM
5548   BFD_RELOC_UNUSED
5549 CODE_FRAGMENT
5550 .
5551 .typedef enum bfd_reloc_code_real bfd_reloc_code_real_type;
5552 */
5553
5554 /*
5555 FUNCTION
5556         bfd_reloc_type_lookup
5557         bfd_reloc_name_lookup
5558
5559 SYNOPSIS
5560         reloc_howto_type *bfd_reloc_type_lookup
5561           (bfd *abfd, bfd_reloc_code_real_type code);
5562         reloc_howto_type *bfd_reloc_name_lookup
5563           (bfd *abfd, const char *reloc_name);
5564
5565 DESCRIPTION
5566         Return a pointer to a howto structure which, when
5567         invoked, will perform the relocation @var{code} on data from the
5568         architecture noted.
5569
5570 */
5571
5572 reloc_howto_type *
5573 bfd_reloc_type_lookup (bfd *abfd, bfd_reloc_code_real_type code)
5574 {
5575   return BFD_SEND (abfd, reloc_type_lookup, (abfd, code));
5576 }
5577
5578 reloc_howto_type *
5579 bfd_reloc_name_lookup (bfd *abfd, const char *reloc_name)
5580 {
5581   return BFD_SEND (abfd, reloc_name_lookup, (abfd, reloc_name));
5582 }
5583
5584 static reloc_howto_type bfd_howto_32 =
5585 HOWTO (0, 00, 2, 32, FALSE, 0, complain_overflow_dont, 0, "VRT32", FALSE, 0xffffffff, 0xffffffff, TRUE);
5586
5587 /*
5588 INTERNAL_FUNCTION
5589         bfd_default_reloc_type_lookup
5590
5591 SYNOPSIS
5592         reloc_howto_type *bfd_default_reloc_type_lookup
5593           (bfd *abfd, bfd_reloc_code_real_type  code);
5594
5595 DESCRIPTION
5596         Provides a default relocation lookup routine for any architecture.
5597
5598 */
5599
5600 reloc_howto_type *
5601 bfd_default_reloc_type_lookup (bfd *abfd, bfd_reloc_code_real_type code)
5602 {
5603   switch (code)
5604     {
5605     case BFD_RELOC_CTOR:
5606       /* The type of reloc used in a ctor, which will be as wide as the
5607          address - so either a 64, 32, or 16 bitter.  */
5608       switch (bfd_arch_bits_per_address (abfd))
5609         {
5610         case 64:
5611           BFD_FAIL ();
5612         case 32:
5613           return &bfd_howto_32;
5614         case 16:
5615           BFD_FAIL ();
5616         default:
5617           BFD_FAIL ();
5618         }
5619     default:
5620       BFD_FAIL ();
5621     }
5622   return NULL;
5623 }
5624
5625 /*
5626 FUNCTION
5627         bfd_get_reloc_code_name
5628
5629 SYNOPSIS
5630         const char *bfd_get_reloc_code_name (bfd_reloc_code_real_type code);
5631
5632 DESCRIPTION
5633         Provides a printable name for the supplied relocation code.
5634         Useful mainly for printing error messages.
5635 */
5636
5637 const char *
5638 bfd_get_reloc_code_name (bfd_reloc_code_real_type code)
5639 {
5640   if (code > BFD_RELOC_UNUSED)
5641     return 0;
5642   return bfd_reloc_code_real_names[code];
5643 }
5644
5645 /*
5646 INTERNAL_FUNCTION
5647         bfd_generic_relax_section
5648
5649 SYNOPSIS
5650         bfd_boolean bfd_generic_relax_section
5651           (bfd *abfd,
5652            asection *section,
5653            struct bfd_link_info *,
5654            bfd_boolean *);
5655
5656 DESCRIPTION
5657         Provides default handling for relaxing for back ends which
5658         don't do relaxing.
5659 */
5660
5661 bfd_boolean
5662 bfd_generic_relax_section (bfd *abfd ATTRIBUTE_UNUSED,
5663                            asection *section ATTRIBUTE_UNUSED,
5664                            struct bfd_link_info *link_info ATTRIBUTE_UNUSED,
5665                            bfd_boolean *again)
5666 {
5667   if (link_info->relocatable)
5668     (*link_info->callbacks->einfo)
5669       (_("%P%F: --relax and -r may not be used together\n"));
5670
5671   *again = FALSE;
5672   return TRUE;
5673 }
5674
5675 /*
5676 INTERNAL_FUNCTION
5677         bfd_generic_gc_sections
5678
5679 SYNOPSIS
5680         bfd_boolean bfd_generic_gc_sections
5681           (bfd *, struct bfd_link_info *);
5682
5683 DESCRIPTION
5684         Provides default handling for relaxing for back ends which
5685         don't do section gc -- i.e., does nothing.
5686 */
5687
5688 bfd_boolean
5689 bfd_generic_gc_sections (bfd *abfd ATTRIBUTE_UNUSED,
5690                          struct bfd_link_info *info ATTRIBUTE_UNUSED)
5691 {
5692   return TRUE;
5693 }
5694
5695 /*
5696 INTERNAL_FUNCTION
5697         bfd_generic_merge_sections
5698
5699 SYNOPSIS
5700         bfd_boolean bfd_generic_merge_sections
5701           (bfd *, struct bfd_link_info *);
5702
5703 DESCRIPTION
5704         Provides default handling for SEC_MERGE section merging for back ends
5705         which don't have SEC_MERGE support -- i.e., does nothing.
5706 */
5707
5708 bfd_boolean
5709 bfd_generic_merge_sections (bfd *abfd ATTRIBUTE_UNUSED,
5710                             struct bfd_link_info *link_info ATTRIBUTE_UNUSED)
5711 {
5712   return TRUE;
5713 }
5714
5715 /*
5716 INTERNAL_FUNCTION
5717         bfd_generic_get_relocated_section_contents
5718
5719 SYNOPSIS
5720         bfd_byte *bfd_generic_get_relocated_section_contents
5721           (bfd *abfd,
5722            struct bfd_link_info *link_info,
5723            struct bfd_link_order *link_order,
5724            bfd_byte *data,
5725            bfd_boolean relocatable,
5726            asymbol **symbols);
5727
5728 DESCRIPTION
5729         Provides default handling of relocation effort for back ends
5730         which can't be bothered to do it efficiently.
5731
5732 */
5733
5734 bfd_byte *
5735 bfd_generic_get_relocated_section_contents (bfd *abfd,
5736                                             struct bfd_link_info *link_info,
5737                                             struct bfd_link_order *link_order,
5738                                             bfd_byte *data,
5739                                             bfd_boolean relocatable,
5740                                             asymbol **symbols)
5741 {
5742   bfd *input_bfd = link_order->u.indirect.section->owner;
5743   asection *input_section = link_order->u.indirect.section;
5744   long reloc_size;
5745   arelent **reloc_vector;
5746   long reloc_count;
5747
5748   reloc_size = bfd_get_reloc_upper_bound (input_bfd, input_section);
5749   if (reloc_size < 0)
5750     return NULL;
5751
5752   /* Read in the section.  */
5753   if (!bfd_get_full_section_contents (input_bfd, input_section, &data))
5754     return NULL;
5755
5756   if (reloc_size == 0)
5757     return data;
5758
5759   reloc_vector = (arelent **) bfd_malloc (reloc_size);
5760   if (reloc_vector == NULL)
5761     return NULL;
5762
5763   reloc_count = bfd_canonicalize_reloc (input_bfd,
5764                                         input_section,
5765                                         reloc_vector,
5766                                         symbols);
5767   if (reloc_count < 0)
5768     goto error_return;
5769
5770   if (reloc_count > 0)
5771     {
5772       arelent **parent;
5773       for (parent = reloc_vector; *parent != NULL; parent++)
5774         {
5775           char *error_message = NULL;
5776           asymbol *symbol;
5777           bfd_reloc_status_type r;
5778
5779           symbol = *(*parent)->sym_ptr_ptr;
5780           if (symbol->section && elf_discarded_section (symbol->section))
5781             {
5782               bfd_byte *p;
5783               static reloc_howto_type none_howto
5784                 = HOWTO (0, 0, 0, 0, FALSE, 0, complain_overflow_dont, NULL,
5785                          "unused", FALSE, 0, 0, FALSE);
5786
5787               p = data + (*parent)->address * bfd_octets_per_byte (input_bfd);
5788               _bfd_clear_contents ((*parent)->howto, input_bfd, input_section,
5789                                    p);
5790               (*parent)->sym_ptr_ptr = bfd_abs_section.symbol_ptr_ptr;
5791               (*parent)->addend = 0;
5792               (*parent)->howto = &none_howto;
5793               r = bfd_reloc_ok;
5794             }
5795           else
5796             r = bfd_perform_relocation (input_bfd,
5797                                         *parent,
5798                                         data,
5799                                         input_section,
5800                                         relocatable ? abfd : NULL,
5801                                         &error_message);
5802
5803           if (relocatable)
5804             {
5805               asection *os = input_section->output_section;
5806
5807               /* A partial link, so keep the relocs.  */
5808               os->orelocation[os->reloc_count] = *parent;
5809               os->reloc_count++;
5810             }
5811
5812           if (r != bfd_reloc_ok)
5813             {
5814               switch (r)
5815                 {
5816                 case bfd_reloc_undefined:
5817                   if (!((*link_info->callbacks->undefined_symbol)
5818                         (link_info, bfd_asymbol_name (*(*parent)->sym_ptr_ptr),
5819                          input_bfd, input_section, (*parent)->address,
5820                          TRUE)))
5821                     goto error_return;
5822                   break;
5823                 case bfd_reloc_dangerous:
5824                   BFD_ASSERT (error_message != NULL);
5825                   if (!((*link_info->callbacks->reloc_dangerous)
5826                         (link_info, error_message, input_bfd, input_section,
5827                          (*parent)->address)))
5828                     goto error_return;
5829                   break;
5830                 case bfd_reloc_overflow:
5831                   if (!((*link_info->callbacks->reloc_overflow)
5832                         (link_info, NULL,
5833                          bfd_asymbol_name (*(*parent)->sym_ptr_ptr),
5834                          (*parent)->howto->name, (*parent)->addend,
5835                          input_bfd, input_section, (*parent)->address)))
5836                     goto error_return;
5837                   break;
5838                 case bfd_reloc_outofrange:
5839                 default:
5840                   abort ();
5841                   break;
5842                 }
5843
5844             }
5845         }
5846     }
5847
5848   free (reloc_vector);
5849   return data;
5850
5851 error_return:
5852   free (reloc_vector);
5853   return NULL;
5854 }