2009-05-25 Tristan Gingold <gingold@adacore.com>
[binutils.git] / install-sh
blob4d4a9519eaf88b18fb157dfe5fae59c1c5d005c7
1 #!/bin/sh
2 # install - install a program, script, or datafile
4 scriptversion=2005-05-14.22
6 # This originates from X11R5 (mit/util/scripts/install.sh), which was
7 # later released in X11R6 (xc/config/util/install.sh) with the
8 # following copyright and license.
10 # Copyright (C) 1994 X Consortium
12 # Permission is hereby granted, free of charge, to any person obtaining a copy
13 # of this software and associated documentation files (the "Software"), to
14 # deal in the Software without restriction, including without limitation the
15 # rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
16 # sell copies of the Software, and to permit persons to whom the Software is
17 # furnished to do so, subject to the following conditions:
19 # The above copyright notice and this permission notice shall be included in
20 # all copies or substantial portions of the Software.
22 # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
23 # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
24 # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
25 # X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
26 # AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
27 # TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
29 # Except as contained in this notice, the name of the X Consortium shall not
30 # be used in advertising or otherwise to promote the sale, use or other deal-
31 # ings in this Software without prior written authorization from the X Consor-
32 # tium.
35 # FSF changes to this file are in the public domain.
37 # Calling this script install-sh is preferred over install.sh, to prevent
38 # `make' implicit rules from creating a file called install from it
39 # when there is no Makefile.
41 # This script is compatible with the BSD install script, but was written
42 # from scratch. It can only install one file at a time, a restriction
43 # shared with many OS's install programs.
45 # set DOITPROG to echo to test this script
47 # Don't use :- since 4.3BSD and earlier shells don't like it.
48 doit="${DOITPROG-}"
50 # put in absolute paths if you don't have them in your path; or use env. vars.
52 mvprog="${MVPROG-mv}"
53 cpprog="${CPPROG-cp}"
54 chmodprog="${CHMODPROG-chmod}"
55 chownprog="${CHOWNPROG-chown}"
56 chgrpprog="${CHGRPPROG-chgrp}"
57 stripprog="${STRIPPROG-strip}"
58 rmprog="${RMPROG-rm}"
59 mkdirprog="${MKDIRPROG-mkdir}"
61 chmodcmd="$chmodprog 0755"
62 chowncmd=
63 chgrpcmd=
64 stripcmd=
65 rmcmd="$rmprog -f"
66 mvcmd="$mvprog"
67 src=
68 dst=
69 dir_arg=
70 dstarg=
71 no_target_directory=
73 usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
74 or: $0 [OPTION]... SRCFILES... DIRECTORY
75 or: $0 [OPTION]... -t DIRECTORY SRCFILES...
76 or: $0 [OPTION]... -d DIRECTORIES...
78 In the 1st form, copy SRCFILE to DSTFILE.
79 In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
80 In the 4th, create DIRECTORIES.
82 Options:
83 -c (ignored)
84 -d create directories instead of installing files.
85 -g GROUP $chgrpprog installed files to GROUP.
86 -m MODE $chmodprog installed files to MODE.
87 -o USER $chownprog installed files to USER.
88 -s $stripprog installed files.
89 -t DIRECTORY install into DIRECTORY.
90 -T report an error if DSTFILE is a directory.
91 --help display this help and exit.
92 --version display version info and exit.
94 Environment variables override the default commands:
95 CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG
98 while test -n "$1"; do
99 case $1 in
100 -c) shift
101 continue;;
103 -d) dir_arg=true
104 shift
105 continue;;
107 -g) chgrpcmd="$chgrpprog $2"
108 shift
109 shift
110 continue;;
112 --help) echo "$usage"; exit $?;;
114 -m) chmodcmd="$chmodprog $2"
115 shift
116 shift
117 continue;;
119 -o) chowncmd="$chownprog $2"
120 shift
121 shift
122 continue;;
124 -s) stripcmd=$stripprog
125 shift
126 continue;;
128 -t) dstarg=$2
129 shift
130 shift
131 continue;;
133 -T) no_target_directory=true
134 shift
135 continue;;
137 --version) echo "$0 $scriptversion"; exit $?;;
139 *) # When -d is used, all remaining arguments are directories to create.
140 # When -t is used, the destination is already specified.
141 test -n "$dir_arg$dstarg" && break
142 # Otherwise, the last argument is the destination. Remove it from $@.
143 for arg
145 if test -n "$dstarg"; then
146 # $@ is not empty: it contains at least $arg.
147 set fnord "$@" "$dstarg"
148 shift # fnord
150 shift # arg
151 dstarg=$arg
152 done
153 break;;
154 esac
155 done
157 if test -z "$1"; then
158 if test -z "$dir_arg"; then
159 echo "$0: no input file specified." >&2
160 exit 1
162 # It's OK to call `install-sh -d' without argument.
163 # This can happen when creating conditional directories.
164 exit 0
167 for src
169 # Protect names starting with `-'.
170 case $src in
171 -*) src=./$src ;;
172 esac
174 if test -n "$dir_arg"; then
175 dst=$src
176 src=
178 if test -d "$dst"; then
179 mkdircmd=:
180 chmodcmd=
181 else
182 mkdircmd=$mkdirprog
184 else
185 # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
186 # might cause directories to be created, which would be especially bad
187 # if $src (and thus $dsttmp) contains '*'.
188 if test ! -f "$src" && test ! -d "$src"; then
189 echo "$0: $src does not exist." >&2
190 exit 1
193 if test -z "$dstarg"; then
194 echo "$0: no destination specified." >&2
195 exit 1
198 dst=$dstarg
199 # Protect names starting with `-'.
200 case $dst in
201 -*) dst=./$dst ;;
202 esac
204 # If destination is a directory, append the input filename; won't work
205 # if double slashes aren't ignored.
206 if test -d "$dst"; then
207 if test -n "$no_target_directory"; then
208 echo "$0: $dstarg: Is a directory" >&2
209 exit 1
211 dst=$dst/`basename "$src"`
215 # This sed command emulates the dirname command.
216 dstdir=`echo "$dst" | sed -e 's,/*$,,;s,[^/]*$,,;s,/*$,,;s,^$,.,'`
218 # Make sure that the destination directory exists.
220 # Skip lots of stat calls in the usual case.
221 if test ! -d "$dstdir"; then
222 defaultIFS='
224 IFS="${IFS-$defaultIFS}"
226 oIFS=$IFS
227 # Some sh's can't handle IFS=/ for some reason.
228 IFS='%'
229 set x `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'`
230 shift
231 IFS=$oIFS
233 pathcomp=
235 while test $# -ne 0 ; do
236 pathcomp=$pathcomp$1
237 shift
238 if test ! -d "$pathcomp"; then
239 $mkdirprog "$pathcomp"
240 # mkdir can fail with a `File exist' error in case several
241 # install-sh are creating the directory concurrently. This
242 # is OK.
243 test -d "$pathcomp" || exit
245 pathcomp=$pathcomp/
246 done
249 if test -n "$dir_arg"; then
250 $doit $mkdircmd "$dst" \
251 && { test -z "$chowncmd" || $doit $chowncmd "$dst"; } \
252 && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } \
253 && { test -z "$stripcmd" || $doit $stripcmd "$dst"; } \
254 && { test -z "$chmodcmd" || $doit $chmodcmd "$dst"; }
256 else
257 dstfile=`basename "$dst"`
259 # Make a couple of temp file names in the proper directory.
260 dsttmp=$dstdir/_inst.$$_
261 rmtmp=$dstdir/_rm.$$_
263 # Trap to clean up those temp files at exit.
264 trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
265 trap '(exit $?); exit' 1 2 13 15
267 # Copy the file name to the temp name.
268 $doit $cpprog "$src" "$dsttmp" &&
270 # and set any options; do chmod last to preserve setuid bits.
272 # If any of these fail, we abort the whole thing. If we want to
273 # ignore errors from any of these, just make sure not to ignore
274 # errors from the above "$doit $cpprog $src $dsttmp" command.
276 { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \
277 && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \
278 && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \
279 && { test -z "$chmodcmd" || $doit $chmodcmd "$dsttmp"; } &&
281 # Now rename the file to the real destination.
282 { $doit $mvcmd -f "$dsttmp" "$dstdir/$dstfile" 2>/dev/null \
283 || {
284 # The rename failed, perhaps because mv can't rename something else
285 # to itself, or perhaps because mv is so ancient that it does not
286 # support -f.
288 # Now remove or move aside any old file at destination location.
289 # We try this two ways since rm can't unlink itself on some
290 # systems and the destination file might be busy for other
291 # reasons. In this case, the final cleanup might fail but the new
292 # file should still install successfully.
294 if test -f "$dstdir/$dstfile"; then
295 $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null \
296 || $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null \
297 || {
298 echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2
299 (exit 1); exit 1
301 else
304 } &&
306 # Now rename the file to the real destination.
307 $doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
310 fi || { (exit 1); exit 1; }
311 done
313 # The final little trick to "correctly" pass the exit status to the exit trap.
315 (exit 0); exit 0
318 # Local variables:
319 # eval: (add-hook 'write-file-hooks 'time-stamp)
320 # time-stamp-start: "scriptversion="
321 # time-stamp-format: "%:y-%02m-%02d.%02H"
322 # time-stamp-end: "$"
323 # End: