imap/Makefile

   1 # ========================================================================
   2 # Copyright 2008-2011 Mark Crispin
   3 # ========================================================================
   4 #
   5
   6 # Program:      IMAP Toolkit Makefile
   7 #
   8 # Author:       Mark Crispin
   9 #
  10 # Date:         7 December 1989
  11 # Last Edited:  15 April 2013 (jonabbey@arlut.utexas.edu)
  12 #
  13 # Previous versions of this file were
  14 #
  15 # Copyright 1988-2008 University of Washington
  16 #
  17 # Licensed under the Apache License, Version 2.0 (the "License");
  18 # you may not use this file except in compliance with the License.
  19 # You may obtain a copy of the License at
  20 #
  21 #     http://www.apache.org/licenses/LICENSE-2.0
  22
  23
  24 # Normal command to build IMAP toolkit:
  25 #  make <port> [EXTRAAUTHENTICATORS=xxx] [EXTRADRIVERS=xxx] [EXTRACFLAGS=xxx]
  26 #              [PASSWDTYPE=xxx] [SSLTYPE=xxx] [IP=n]
  27
  28
  29 # Port name.  These refer to the *standard* compiler on the given system.
  30 # This means, for example, that the hpx port is for HP's compiler and not for
  31 # a non-standard compiler such as gcc.
  32 #
  33 # If you are using gcc and it is not the standard compiler on your system, try
  34 # using an ANSI port that is close to what you have.  For example, if your
  35 # system is SVR4ish, try a32 or lnx; if it's more BSDish, try nxt, mct, or bsi.
  36 #
  37 # The following ports are bundled:
  38 # a32   AIX 3.2 for RS/6000
  39 # a41   AIX 4.1 for RS/6000
  40 # a52   AIX 5.2
  41 # aix   AIX/370 (not RS/6000!!)
  42 # ami   AmigaDOS
  43 # am2   AmigaDOS with a 68020+
  44 # ama   AmigaDOS using AS225R2
  45 # amn   AmigaDOS with a 680x0 using "new" socket library
  46 # aos   AOS for RT
  47 # art   AIX 2.2.1 for RT
  48 # asv   Altos SVR4
  49 # aux   A/UX
  50 # bs3   BSD/i386 3.0 and higher
  51 # bsd   generic BSD 4.3 (as in ancient 1980s version)
  52 # bsf   FreeBSD
  53 # bsi   BSD/i386
  54 # bso   OpenBSD (yes, yet another one...)
  55 # cvx   Convex
  56 # cyg   Cygwin
  57 # d-g   Data General DG/UX prior to 5.4 (d41 port no longer exists)
  58 # d54   Data General DG/UX 5.4
  59 # do4   Apollo Domain/OS sr10.4
  60 # dpx   Bull DPX/2 B.O.S.
  61 # drs   ICL DRS/NX
  62 # dyn   Dynix
  63 # epx   EP/IX
  64 # ga4   GCC AIX 4.x for RS/6000
  65 # gas   GCC Altos SVR4
  66 # gcs   GCC Solaris with Blastwave Community Open Source Software
  67 # gh9   GCC HP-UX 9.x
  68 # ghp   GCC HP-UX 10.x
  69 # ghs   GCC HP-UX 10.x with Trusted Computer Base
  70 # go5   GCC 2.7.1 (95q4 from Skunkware _not_ 98q2!) SCO Open Server 5.0.x
  71 # gsc   GCC Santa Cruz Operation
  72 # gsg   GCC SGI
  73 # gso   GCC Solaris
  74 # gsu   GCC SUN-OS
  75 # gul   GCC RISC Ultrix (DEC-5000)
  76 # h11   HP-UX 11i
  77 # hpp   HP-UX 9.x (see gh9)
  78 # hpx   HP-UX 10.x (see ghp, ghs, hxd, and shp)
  79 # hxd   HP-UX 10.x with DCE security (see shp)
  80 # isc   Interactive Systems
  81 # ldb   Debian Linux
  82 # lfd   Fedora Linux
  83 # ln8   Linux for Nokia N800
  84 # lnx   Linux with traditional passwords and crypt() in the C library
  85 #        (see lnp, sl4, sl5, and slx)
  86 # lnp   Linux with Pluggable Authentication Modules (PAM)
  87 # lmd   Mandrake Linux
  88 # lr5   RedHat Enterprise Linux 5 and later (same as lfd)
  89 # lrh   RedHat Linux 7.2 and later
  90 # lsu   SuSE Linux (same as lrh)
  91 # lyn   LynxOS
  92 # mct   MachTen
  93 # mnt   Atari ST Mint (not MacMint)
  94 # neb   NetBSD
  95 # nec   NEC UX
  96 # nto   QNX Neutrino RTP
  97 # nxt   NEXTSTEP
  98 # nx3   NEXTSTEP 3.x
  99 # osf   OSF/1 (see sos, os4)
 100 # os4   OSF/1 (Digital UNIX) 4
 101 # osi   Apple iPhone and iPod Touch
 102 # osx   Mac OS X
 103 # oxp   Mac OS X with Pluggable Authentication Modules (PAM)
 104 # oxs   Mac OS X Snow Leopard
 105 # ptx   PTX
 106 # pyr   Pyramid
 107 # qnx   QNX 4
 108 # qn6   QNX 6
 109 # s40   SUN-OS 4.0 (*not* Solaris)
 110 # sc5   SCO Open Server 5.0.x (see go5)
 111 # sco   Santa Cruz Operation (see sc5, go5)
 112 # shp   HP-UX with Trusted Computer Base
 113 # sgi   Silicon Graphics IRIX
 114 # sg6   Silicon Graphics IRIX 6.5
 115 # sl4   Linux using -lshadow to get the crypt() function
 116 # sl5   Linux with shadow passwords, no extra libraries
 117 # slx   Linux using -lcrypt to get the crypt() function
 118 # snx   Siemens Nixdorf SININX or Reliant UNIX
 119 # soc   Solaris with /opt/SUNWspro/bin/cc
 120 # sol   Solaris (won't work unless "ucbcc" works -- use gso instead)
 121 # sos   OSF/1 with SecureWare
 122 # ssn   SUN-OS with shadow password security
 123 # sua   Windows Vista (Enterprise or Ultima) Subsystem for Unix Applications
 124 # sun   SUN-OS 4.1 or better (*not* Solaris) (see ssn)
 125 # sv2   SVR2 on AT&T PC-7300 (incomplete port)
 126 # sv4   generic SVR4
 127 # ult   RISC Ultrix (DEC-5000)
 128 # uw2   UnixWare SVR4.2
 129 # vul   VAX Ultrix
 130 # vu2   VAX Ultrix 2.3 (e.g. for VAXstation-2000 or similar old version)
 131
 132
 133 # Extra authenticators (e.g. OTP, Kerberos, etc.).  Adds linkage for
 134 # auth_xxx.c and executes Makefile.xxx, where xxx is the name of the
 135 # authenticator.  Some authenticators are only available from third parties.
 136 #
 137 # The following extra authenticators are bundled:
 138 # gss   Kerberos V
 139
 140 EXTRAAUTHENTICATORS=
 141
 142
 143 # Additional mailbox drivers.  Add linkage for xxxdriver.  Some drivers are
 144 # only available from third parties.
 145 #
 146 # The following extra drivers are bundled:
 147 # mbox  if file "mbox" exists on the home directory, automatically moves mail
 148 #        from the spool directory to "mbox" and uses "mbox" as INBOX.
 149
 150 EXTRADRIVERS=mbox
 151
 152
 153 # Plaintext password type.  Defines how plaintext password authentication is
 154 # done on this system.
 155 #
 156 # The following plaintext login types are bundled:
 157 # afs   AFS authentication database
 158 # dce   DCE authentication database
 159 # gss   Kerberos V
 160 # nul   plaintext authentication never permitted
 161 # pam   PAM authentication (note: for Linux, you should use the "lnp" port
 162 #        instead of setting this...also, you may have to modify PAMLDFLAGS
 163 #        in the imap-[]/src/osdep/unix/Makefile
 164 # pmb   PAM authentication for broken implementations such as Solaris.
 165 #        you may have to modify PAMLDFLAGS
 166 # std   system standard (typically passwd file), determined by port
 167 # two   try alternative (defined by CHECKPWALT), then std
 168
 169 PASSWDTYPE=std
 170
 171
 172 # SSL type.  Defines whether or not SSL support is on this system
 173 #
 174 # The following SSL types are bundled:
 175 # none  no SSL support
 176 # unix  SSL support using OpenSSL
 177 # nopwd SSL support using OpenSSL, and plaintext authentication permitted only
 178 #       in SSL/TLS sessions
 179 # sco   link SSL before other libraries (for SCO systems)
 180 # unix.nopwd    same as nopwd
 181 # sco.nopwd     same as nopwd, plaintext authentication in SSL/TLS only
 182 #
 183 # SSLTYPE=nopwd is now the default as required by RFC 3501
 184
 185 SSLTYPE=nopwd
 186
 187
 188 # IP protocol version
 189 #
 190 # The following IP protocol versions are defined:
 191 # 4     (default) IPv4 support only
 192 # 6     IPv6 and IPv4 support
 193
 194 IP=4
 195 IP6=6
 196
 197
 198 # The following extra compilation flags are defined.  None of these flags are
 199 # recommended.  If you use these, include them in the EXTRACFLAGS.
 200 #
 201 # -DDISABLE_POP_PROXY
 202 #       By default, the ipop[23]d servers offer POP->IMAP proxy access,
 203 #       which allow a POP client to access mail on an IMAP server by using the
 204 #       POP server as a go-between.  Setting this option disables this
 205 #       facility.
 206 #
 207 # -DOLDFILESUFFIX=\"xxx\"
 208 #       Change the default suffix appended to the backup .newsrc file from
 209 #       "old".
 210 #
 211 # -DSTRICT_RFC822_TIMEZONES
 212 #       Disable recognition of the non-standard UTC (0000), MET (+0100),
 213 #       EET (+0200), JST (+0900), ADT (-0300), AST (-0400), YDT (-0800),
 214 #       YST (-0900), and HST (-1000) symbolic timezones.
 215 #
 216 # -DBRITISH_SUMMER_TIME
 217 #       Enables recognition of non-standard symbolic timezone BST as +0100.
 218 #
 219 # -DBERING_STANDARD_TIME
 220 #       Enables recognition of non-standard symbolic timezone BST as -1100.
 221 #
 222 # -DNEWFOUNDLAND_STANDARD_TIME
 223 #       Enables recognition of non-standard symbolic timezone NST as -0330.
 224 #
 225 # -DNOME_STANDARD_TIME
 226 #       Enables recognition of non-standard symbolic timezone NST as -1100.
 227 #
 228 # -DSAMOA_STANDARD_TIME
 229 #       Enables recognition of non-standard symbolic timezone SST as -1100.
 230 #
 231 # -DY4KBUGFIX
 232 #       Turn on the Y4K bugfix (yes, that's year 4000).  It isn't well-known,
 233 #       but century years evenly divisible by 4000 are *not* leap years in the
 234 #       Gregorian calendar.  A lot of "Y2K compilant" software does not know
 235 #       about this rule.  Remember to turn this on sometime in the next 2000
 236 #       years.
 237 #
 238 # -DUSEORTHODOXCALENDAR
 239 #       Use the more accurate Eastern Orthodox calendar instead of the
 240 #       Gregorian calendar.  The century years which are leap years happen
 241 #       at alternating 400 and 500 year intervals without shifts every 4000
 242 #       years.  The Orthodox and Gregorian calendars diverge by 1 day for
 243 #       gradually-increasing intervals, starting at 2800-2900, and becoming
 244 #       permanent at 48,300.
 245 #
 246 # -DUSEJULIANCALENDAR
 247 #       Use the less accurate Julian calendar instead of the Gregorian
 248 #       calendar.  Leap years are every 4 years, including century years.
 249 #       My apologies to those in the English-speaking world who object to
 250 #       the reform of September 2, 1752 -> September 14, 1752, since this
 251 #       code still uses January 1 (which Julius Ceasar decreed as the start
 252 #       of the year, which since 153 BCE was the day that Roman consuls
 253 #       took office), rather than the traditional March 25 used by the
 254 #       British.  As of 2005, the Julian calendar and the Gregorian calendar
 255 #       diverge by 15 days.
 256
 257 EXTRACFLAGS=
 258
 259
 260 # Extra linker flags (additional/alternative libraries, etc.)
 261
 262 EXTRALDFLAGS=
 263
 264
 265 # Special make flags (e.g. to override make environment variables)
 266
 267 EXTRASPECIALS=
 268 SPECIALS=
 269
 270
 271 # Normal commands
 272
 273 CAT=cat
 274 CD=cd
 275 LN=ln -s
 276 MAKE=make
 277 MKDIR=mkdir
 278 BUILDTYPE=rebuild
 279 RM=rm -rf
 280 SH=sh
 281 SYSTEM=unix
 282 TOOLS=tools
 283 TOUCH=touch
 284
 285
 286 # Primary build command
 287
 288 BUILD=$(MAKE) build EXTRACFLAGS='$(EXTRACFLAGS)'\
 289  EXTRALDFLAGS='$(EXTRALDFLAGS)'\
 290  EXTRADRIVERS='$(EXTRADRIVERS)'\
 291  EXTRAAUTHENTICATORS='$(EXTRAAUTHENTICATORS)'\
 292  PASSWDTYPE=$(PASSWDTYPE) SSLTYPE=$(SSLTYPE) IP=$(IP)\
 293  EXTRASPECIALS='$(EXTRASPECIALS)'
 294
 295
 296 # Make the IMAP Toolkit
 297
 298 all:    c-client SPECIALS rebuild bundled
 299
 300 c-client:
 301         @echo Not processed yet.  In a first-time build, you must specify
 302         @echo the system type so that the sources are properly processed.
 303         @false
 304
 305
 306 SPECIALS:
 307         echo $(SPECIALS) > SPECIALS
 308
 309 # Note on SCO you may have to set LN to "ln".
 310
 311 a32 a41 a52 aix bs3 bsi d-g d54 do4 drs epx ga4 gas gh9 ghp ghs go5 gsc gsg gso gul h11 hpp hpx lnp lyn mct mnt nec nto nxt nx3 osf os4 ptx qnx qn6 sc5 sco sgi sg6 shp sl4 sl5 slx snx soc sol sos uw2: an
 312         $(BUILD) BUILDTYPE=$@
 313
 314 # If you use sv4, you may find that it works to move it to use the an process.
 315 # If so, you probably will want to delete the "-Dconst=" from the sv4 CFLAGS in
 316 # the c-client Makefile.
 317
 318 aos art asv aux bsd cvx dpx dyn isc pyr sv4 ult vul vu2: ua
 319         $(BUILD) BUILDTYPE=$@
 320
 321
 322 # Knotheads moved Kerberos and SSL locations on these platforms
 323
 324 # Paul Vixie claims that all FreeBSD versions have working IPv6
 325
 326 bsf:    an
 327         $(TOUCH) ip6
 328         $(BUILD) BUILDTYPE=$@ IP=$(IP6) \
 329         PASSWDTYPE=pam \
 330         SPECIALS="GSSINCLUDE=/usr/include GSSLIB=/usr/lib PAMLDFLAGS=-lpam"
 331
 332 # I assume that Theo did the right thing for IPv6.  OpenBSD does not have PAM.
 333
 334 bso:    an
 335         $(TOUCH) ip6
 336         $(BUILD) BUILDTYPE=$@ IP=$(IP6) \
 337         SPECIALS="GSSINCLUDE=/usr/include GSSLIB=/usr/lib"
 338
 339 # Info from Joel Reicher about NetBSD SSL paths.  I assume it has PAM because pam is in NetBSD sources...
 340
 341 neb:    an
 342         $(TOUCH) ip6
 343         $(BUILD) BUILDTYPE=$@ IP=$(IP6) \
 344         PASSWDTYPE=pam \
 345         SPECIALS="GSSINCLUDE=/usr/include GSSLIB=/usr/lib PAMLDFLAGS=-lpam"
 346
 347 cyg:    an
 348         $(BUILD) BUILDTYPE=cyg \
 349
 350 gcs:    an
 351         $(BUILD) BUILDTYPE=gso \
 352         SPECIALS="SSLINCLUDE=/opt/csw/include/openssl SSLLIB=/opt/csw/lib SSLCERTS=/opt/csw/ssl/certs SSLKEYS=/opt/csw/ssl/certs"
 353
 354 ldb:    an
 355         $(BUILD) BUILDTYPE=lnp IP=$(IP6) \
 356         SPECIALS="GSSINCLUDE=/usr/include GSSLIB=/usr/lib MAILSPOOL=/var/mail"
 357
 358 lfd:    an
 359         $(BUILD) BUILDTYPE=lnp IP=$(IP6) \
 360         SPECIALS="GSSDIR=/usr/kerberos"
 361
 362 ln8:    an
 363         $(TOUCH) ip6
 364         $(BUILD) BUILDTYPE=slx IP=$(IP6) \
 365         SPECIALS="MAILSPOOL=/var/mail"
 366
 367
 368 # RHEL5/6 does not have the IPv6 bug
 369
 370 lr5:    an
 371         $(TOUCH) ip6
 372         $(BUILD) BUILDTYPE=lnp IP=$(IP6) \
 373         SPECIALS="GSSDIR=/usr/kerberos"
 374
 375 lmd:    an
 376         $(BUILD) BUILDTYPE=lnp IP=$(IP6) \
 377         SPECIALS="GSSINCLUDE=/usr/include GSSLIB=/usr/lib"
 378
 379 # RHEL3 definitely has the IPv6 bug
 380
 381 lrh:    lrhok an
 382         $(BUILD) BUILDTYPE=lnp IP=$(IP6) \
 383         SPECIALS="GSSDIR=/usr/kerberos"
 384
 385 lrhok:
 386         @$(SH) -c '(test ! -d /etc/pki/tls ) || make lrhwarn'
 387         @$(TOUCH) lrhok
 388
 389 lrhwarn:
 390         @echo You are building for OLD versions of RedHat Linux.  This build
 391         @echo is NOT suitable for RedHat Enterprise 5 / 6, which store SSL/TLS
 392         @echo certificates and keys in /etc/pki/tls rather than /usr/share/ssl.
 393         @echo If you want to build for modern RedHat Linux, you should use
 394         @echo make lr5 instead.
 395         @echo Do you want to continue this build?  Type y or n please:
 396         @$(SH) -c 'read x; case "$$x" in y) exit 0;; *) exit 1;; esac'
 397         @echo OK, I will remember that you really want to build for old
 398         @echo RedHat Linux.  You will not see this message again.
 399         @echo If you realize that you really wanted to build for modern
 400         @echo RedHat Linux, then do the following commands:
 401         @echo % rm lrhok
 402         @echo % make clean
 403         @echo % make lr5
 404
 405 lsu:    an
 406         $(BUILD) BUILDTYPE=lnp IP=$(IP6) \
 407         SPECIALS="GSSDIR=/usr/kerberos"
 408
 409 # iToy does not have Kerberos or PAM.  It doesn't have a
 410 # /System/Library/OpenSSL directory either, but the libcrypto shared library
 411 # has these locations so this is what we will use.
 412
 413 osi:    an
 414         $(TOUCH) ip6
 415         $(BUILD) BUILDTYPE=osx IP=$(IP6) CC=arm-apple-darwin-gcc \
 416         EXTRACFLAGS="$(EXTRACFLAGS) -DMAC_OSX_KLUDGE=1 -Dhash_create=Hash_create -Dhash_destroy=Hash_destroy -Dlogout=Logout" \
 417
 418 oxp:    an
 419         $(TOUCH) ip6
 420         $(BUILD) BUILDTYPE=osx IP=$(IP6) EXTRAAUTHENTICATORS="$(EXTRAAUTHENTICATORS) gss" \
 421         PASSWDTYPE=pam \
 422         EXTRACFLAGS="$(EXTRACFLAGS) -DMAC_OSX_KLUDGE=1" \
 423         SPECIALS="GSSINCLUDE=/usr/include GSSLIB=/usr/lib PAMDLFLAGS=-lpam"
 424
 425 oxs:    an
 426         $(TOUCH) ip6
 427         $(BUILD) BUILDTYPE=osx IP=$(IP6) EXTRAAUTHENTICATORS="$(EXTRAAUTHENTICATORS) gss" \
 428         PASSWDTYPE=pam \
 429         EXTRACFLAGS="$(EXTRACFLAGS)" \
 430         SPECIALS="GSSINCLUDE=/usr/include GSSLIB=/usr/lib PAMDLFLAGS=-lpam"
 431
 432 osx:    osxok an
 433         $(TOUCH) ip6
 434         $(BUILD) BUILDTYPE=$@ IP=$(IP6) EXTRAAUTHENTICATORS="$(EXTRAAUTHENTICATORS) gss" \
 435         SPECIALS="GSSINCLUDE=/usr/include GSSLIB=/usr/lib"
 436
 437 osxok:
 438         @$(SH) -c '(test ! -f /usr/include/pam/pam_appl.h ) || make osxwarn'
 439         @$(TOUCH) osxok
 440
 441 osxwarn:
 442         @echo You are building for OLD versions of Mac OS X.  This build is
 443         @echo NOT suitable for modern versions of Mac OS X, such as Tiger,
 444         @echo which use PAM-based authentication.  If you want to build for
 445         @echo modern Mac OS X, you should use make oxp instead.
 446         @echo Do you want to continue this build?  Type y or n please:
 447         @$(SH) -c 'read x; case "$$x" in y) exit 0;; *) exit 1;; esac'
 448         @echo OK, I will remember that you really want to build for old
 449         @echo Mac OS X.  You will not see this message again.
 450         @echo If you realize that you really wanted to build for modern
 451         @echo Mac OS X, then do the following commands:
 452         @echo % rm osxok
 453         @echo % make clean
 454         @echo % make oxp
 455
 456
 457 # Linux shadow password support doesn't build on traditional systems, but most
 458 # Linux systems are shadow these days.
 459
 460 lnx:    lnxnul an
 461         $(BUILD) BUILDTYPE=$@
 462
 463 lnxnul:
 464         @$(SH) -c '(test $(PASSWDTYPE) = nul) || make lnxok'
 465
 466 lnxok:
 467         @echo You are building for traditional Linux.  Most modern Linux
 468         @echo systems require that you build using make slx.
 469         @echo Do you want to continue this build?  Type y or n please:
 470         @$(SH) -c 'read x; case "$$x" in y) exit 0;; *) exit 1;; esac'
 471         @echo OK, I will remember that you really want to build for
 472         @echo traditional Linux.  You will not see this message again.
 473         @echo If you discover that you can not log in to the POP and IMAP
 474         @echo servers, then do the following commands:
 475         @echo % rm lnxok
 476         @echo % make clean
 477         @echo % make slx
 478         @echo If slx does not work, try sl4 or sl5.  Be sure to do a
 479         @echo make clean between each try!
 480         @$(TOUCH) lnxok
 481
 482
 483 # SUN-OS C compiler makes you load libdl by hand...
 484
 485 ssn sun: sunok suntools ua
 486         $(BUILD) BUILDTYPE=$@
 487
 488 suntools:
 489         $(CD) tools;$(MAKE) LDFLAGS=-ldl
 490
 491 gsu:    sunok an
 492         $(BUILD) BUILDTYPE=$@
 493
 494 s40:    sunok ua
 495         $(BUILD) BUILDTYPE=$@
 496
 497 sunok:
 498         @echo You are building for the old BSD-based SUN-OS.  This is NOT
 499         @echo the modern SVR4-based Solaris.  If you want to build for
 500         @echo Solaris, you should use make gso or make sol or make soc.  Do
 501         @echo you want to continue this build?  Type y or n please:
 502         @$(SH) -c 'read x; case "$$x" in y) exit 0;; *) exit 1;; esac'
 503         @echo OK, I will remember that you really want to build for the old
 504         @echo BSD-based SUN-OS.  You will not see this message again.
 505         @echo If the build fails and you realize that you really wanted to
 506         @echo build for Solaris, then do the following commands:
 507         @echo % rm sunok
 508         @echo % make clean
 509         @echo % make gso
 510         @echo If gso does not work, try sol.  Be sure to do a make clean
 511         @echo between each try!
 512         @$(TOUCH) sunok
 513
 514
 515 # SVR2 doesn't have symbolic links (at least my SVR2 system doesn't)
 516
 517 sv2:
 518         $(MAKE) ua LN=ln
 519         $(BUILD) BUILDTYPE=$@ LN=ln
 520
 521 # Hard links don't quite work right in SUA, and there don't seem to be any
 522 # SSL includes.  However, IPv6 works.
 523
 524 sua:
 525         $(TOUCH) ip6 sslnone
 526         $(MAKE) an LN=cp SSLTYPE=none
 527         $(BUILD) BUILDTYPE=$@ LN=cp IP=$(IP6) SSLTYPE=none
 528
 529
 530 # Pine port names, not distinguished in c-client
 531
 532 bs2:    an
 533         $(BUILD) BUILDTYPE=bsi
 534
 535 pt1:    an
 536         $(BUILD) BUILDTYPE=ptx
 537
 538
 539 # Compatibility
 540
 541 hxd:
 542         $(BUILD) BUILDTYPE=hpx PASSWDTYPE=dce
 543
 544 # Amiga
 545
 546 ami am2 ama amn:
 547         $(MAKE) an LN=cp SYSTEM=amiga
 548         $(BUILD) BUILDTYPE=$@ LN=cp
 549
 550
 551 # Courtesy entries for Microsoft systems
 552
 553 nt:
 554         nmake /nologo /f makefile.nt
 555
 556 ntk:
 557         nmake /nologo /f makefile.ntk
 558
 559 w2k:
 560         nmake /nologo /f makefile.w2k
 561
 562 wce:
 563         nmake /nologo /f makefile.wce
 564
 565
 566 # SSL build choices
 567
 568 sslnopwd sslunix.nopwd sslsco.nopwd:
 569         @echo +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 570         @echo + Building in full compliance with RFC 3501 security
 571         @echo + requirements:
 572         @echo ++ TLS/SSL encryption is supported
 573         @echo ++ Unencrypted plaintext passwords are prohibited
 574         @echo +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 575
 576 sslunix sslsco:
 577         @echo +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 578         @echo + Building in PARTIAL compliance with RFC 3501 security
 579         @echo + requirements:
 580         @echo + Compliant:
 581         @echo ++ TLS/SSL encryption is supported
 582         @echo + Non-compliant:
 583         @echo ++ Unencrypted plaintext passwords are permitted
 584         @echo +
 585         @echo + In order to rectify this problem, you MUST build with:
 586         @echo ++ SSLTYPE=$(SSLTYPE).nopwd
 587         @echo +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 588         @echo
 589         @echo Do you want to continue this build anyway?  Type y or n please:
 590         @$(SH) -c 'read x; case "$$x" in y) exit 0;; *) (make nounenc;exit 1);; esac'
 591
 592 nounenc:
 593         @echo +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 594         @echo + At your request, this build with unencrypted authentication has
 595         @echo + been CANCELLED.
 596         @echo + You must start over with a new make command.
 597         @echo +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 598
 599
 600 sslnone:
 601         @echo +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 602         @echo + Building in NON-COMPLIANCE with RFC 3501 security requirements:
 603         @echo + Non-compliant:
 604         @echo ++ TLS/SSL encryption is NOT supported
 605         @echo ++ Unencrypted plaintext passwords are permitted
 606         @echo +
 607         @echo + In order to rectify this problem, you MUST build with:
 608         @echo ++ SSLTYPE=nopwd
 609         @echo + You must also have OpenSSL or equivalent installed.
 610         @echo +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 611         @echo
 612         @echo Do you want to continue this build anyway?  Type y or n please:
 613         @$(SH) -c 'read x; case "$$x" in y) exit 0;; *) (make nonossl;exit 1);; esac'
 614
 615 nonossl:
 616         @echo +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 617         @echo + At your request, this build with no TLS/SSL support has been
 618         @echo + CANCELLED.
 619         @echo + You must start over with a new make command.
 620         @echo +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 621
 622
 623 # IP build choices
 624
 625 ip4:
 626         @echo +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 627         @echo + Building with IPv4 support
 628         @echo +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 629
 630 ip6:
 631         @echo +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 632         @echo + Building with IPv6 support
 633         @echo +
 634         @echo + NOTE: Some versions of glibc have a bug in the getaddrinfo
 635         @echo + call which does DNS name resolution.  This bug causes host
 636         @echo + names to be canonicalized incorrectly, as well as doing an
 637         @echo + unnecessary and performance-sapping reverse DNS call.  This
 638         @echo + problem does not affect the IPv4 gethostbyname call.
 639         @echo +
 640         @echo + getaddrinfo works properly on Mac OS X and Windows.  However,
 641         @echo + the problem has been observed on some Linux systems.
 642         @echo +
 643         @echo + If you answer n to the following question the build will be
 644         @echo + cancelled and you must rebuild.  If you did not specify IPv6
 645         @echo + yourself, try adding IP6=4 to the make command line.
 646         @echo +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 647         @echo
 648         @echo Do you want to build with IPv6 anyway?  Type y or n please:
 649         @$(SH) -c 'read x; case "$$x" in y) exit 0;; *) (make noip6;exit 1);; esac'
 650         @echo OK, I will remember that you really want to build with IPv6.
 651         @echo You will not see this message again.
 652         @$(TOUCH) ip6
 653
 654 noip6:
 655         $(MAKE) clean
 656         @echo +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 657         @echo + At your request, this build with IPv6 has been CANCELLED.
 658         @echo + You must start over with a new make command.
 659         @echo +
 660         @echo + If you wish to rebuild without IPv6 support, do one of the
 661         @echo + following:
 662         @echo +
 663         @echo + 1. If you specified IP=6 on the make command line, omit it.
 664         @echo +
 665         @echo + 2. Some of the Linux builds automatically select IPv6.  If
 666         @echo + you choose one of those builds, add IP6=4 to the make command
 667         @echo + line.  Note that this is IP6=4, not IP=4.
 668         @echo +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 669
 670 # C compiler types
 671
 672 an ua:
 673         @$(MAKE) ssl$(SSLTYPE)
 674         @echo Applying $@ process to sources...
 675         $(TOOLS)/$@ "$(LN)" src/c-client c-client
 676         $(TOOLS)/$@ "$(LN)" src/ansilib c-client
 677         $(TOOLS)/$@ "$(LN)" src/charset c-client
 678         $(TOOLS)/$@ "$(LN)" src/osdep/$(SYSTEM) c-client
 679         $(TOOLS)/$@ "$(LN)" src/mtest mtest
 680         $(TOOLS)/$@ "$(LN)" src/ipopd ipopd
 681         $(TOOLS)/$@ "$(LN)" src/imapd imapd
 682         $(TOOLS)/$@ "$(LN)" src/mailutil mailutil
 683         $(TOOLS)/$@ "$(LN)" src/mlock mlock
 684         $(TOOLS)/$@ "$(LN)" src/dmail dmail
 685         $(TOOLS)/$@ "$(LN)" src/tmail tmail
 686         $(LN) $(TOOLS)/$@ .
 687
 688 build:  OSTYPE rebuild rebuildclean bundled
 689
 690 OSTYPE:
 691         @$(MAKE) ip$(IP)
 692         @echo Building c-client for $(BUILDTYPE)...
 693         @$(TOUCH) SPECIALS
 694         echo `$(CAT) SPECIALS` $(EXTRASPECIALS) > c-client/SPECIALS
 695         $(CD) c-client;$(MAKE) $(BUILDTYPE) EXTRACFLAGS='$(EXTRACFLAGS)'\
 696          EXTRALDFLAGS='$(EXTRALDFLAGS)'\
 697          EXTRADRIVERS='$(EXTRADRIVERS)'\
 698          EXTRAAUTHENTICATORS='$(EXTRAAUTHENTICATORS)'\
 699          PASSWDTYPE=$(PASSWDTYPE) SSLTYPE=$(SSLTYPE) IP=$(IP)\
 700          $(SPECIALS) $(EXTRASPECIALS)
 701         echo $(BUILDTYPE) > OSTYPE
 702         $(TOUCH) rebuild
 703
 704 rebuild:
 705         @$(SH) -c '(test $(BUILDTYPE) = rebuild -o $(BUILDTYPE) = `$(CAT) OSTYPE`) || (echo Already built for `$(CAT) OSTYPE` -- you must do \"make clean\" first && exit 1)'
 706         @echo Rebuilding c-client for `$(CAT) OSTYPE`...
 707         @$(TOUCH) SPECIALS
 708         $(CD) c-client;$(MAKE) all CC=`$(CAT) CCTYPE` \
 709          CFLAGS="`$(CAT) CFLAGS`" `$(CAT) SPECIALS`
 710
 711 rebuildclean:
 712         $(SH) -c '$(RM) rebuild || true'
 713
 714 bundled:
 715         @echo Building bundled tools...
 716         $(CD) mtest;$(MAKE)
 717         $(CD) ipopd;$(MAKE)
 718         $(CD) imapd;$(MAKE)
 719         $(CD) mailutil;$(MAKE)
 720         @$(SH) -c '(test -f /usr/include/sysexits.h ) || make sysexitwarn'
 721         $(CD) mlock;$(MAKE) || true
 722         $(CD) dmail;$(MAKE) || true
 723         $(CD) tmail;$(MAKE) || true
 724
 725
 726 sysexitwarn:
 727         @echo +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 728         @echo + Hmm...it does not look like /usr/include/sysexits.h exists.
 729         @echo + Either your system is too ancient to have the sysexits.h
 730         @echo + include, or your C compiler gets it from some other location
 731         @echo + than /usr/include.  If your system is too old to have the
 732         @echo + sysexits.h include, you will not be able to build the
 733         @echo + following programs.
 734         @echo +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 735
 736 clean:
 737         @echo Removing old processed sources and binaries...
 738         $(SH) -c '$(RM) an ua OSTYPE SPECIALS c-client mtest imapd ipopd mailutil mlock dmail tmail ip6 || true'
 739         $(CD) tools;$(MAKE) clean
 740
 741
 742 # A monument to a hack of long ago and far away...
 743 love:
 744         @echo not war?