build: depends on cairo-gobject if introspection is enabled

[adg.git] / src / cpml / cpml-arc.c

/* CPML - Cairo Path Manipulation Library
 * Copyright (C) 2007,2008,2009,2010,2011,2012,2013  Nicola Fontana <ntd at entidi.it>
 *
 * This library is free software; you can redistribute it and/or
 * modify it under the terms of the GNU Lesser General Public
 * License as published by the Free Software Foundation; either
 * version 2 of the License, or (at your option) any later version.
 *
 * This library is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * Lesser General Public License for more details.
 *
 * You should have received a copy of the GNU Lesser General Public
 * License along with this library; if not, write to the
 * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
 * Boston, MA  02110-1301, USA.
 */


/**
 * SECTION:cpml-arc
 * @Section_Id:CpmlArc
 * @title: CpmlArc
 * @short_description: Manipulation of circular arcs
 *
 * The following functions manipulate %CPML_ARC #CpmlPrimitive.
 * No validation is made on the input so use the following methods
 * only when you are sure the <varname>primitive</varname> argument
 * is effectively an arc-to.
 *
 * The arc primitive is defined by 3 points: the first one is the usual
 * implicit point got from the previous primitive, the second point is
 * an arbitrary intermediate point laying on the arc and the third point
 * is the end of the arc. These points identify univocally an arc:
 * furthermore, the intermediate point also gives the side of
 * the arc.
 *
 * As a special case, when the first point is coincident with the end
 * point the primitive is considered a circle with diameter defined by
 * the segment between the first and the intermediate point.
 *
 * <important>
 * <para>
 * An arc is not a native cairo primitive and should be treated specially.
 * </para>
 * </important>
 *
 * Using these CPML APIs you are free to use %CPML_ARC whenever
 * you want but, if you are directly accessing the struct fields, you
 * are responsible of converting arcs to curves before passing them
 * to cairo. In other words, do not directly feed #CpmlPath struct to
 * cairo (throught cairo_append_path() for example) or at least do not
 * expect it will work.
 *
 * The conversion is provided by two APIs: cpml_arc_to_cairo() and
 * cpml_arc_to_curves(). The former directly renders to a cairo context
 * and is internally used by all the ..._to_cairo() functions when an
 * arc is met. The latter provided a more powerful (and more complex)
 * approach as it allows to specify the number of curves to use and do
 * not need a cairo context.
 *
 * <important>
 * <title>TODO</title>
 * <itemizedlist>
 * <listitem>the get_closest_pos() method must be implemented;</listitem>
 * <listitem>the put_intersections() method must be implemented;</listitem>
 * </itemizedlist>
 * </important>
 *
 * Since: 1.0
 **/


#include "cpml-internal.h"
#include "cpml-extents.h"
#include "cpml-segment.h"
#include "cpml-primitive.h"
#include "cpml-primitive-private.h"
#include "cpml-arc.h"
#include "cpml-curve.h"
#include <math.h>


/* Hardcoded max angle of the arc to be approximated by a Bézier curve:
 * this influence the arc quality (the default value is got from cairo) */
#define ARC_MAX_ANGLE   M_PI_2

/* Macro to save typing and make put_extents() code cleaner */
#define ANGLE_INCLUDED(d) \
    ((start < (d) && end > (d)) || (start > (d) && end < (d)))


static double           get_length      (const CpmlPrimitive    *arc);
static void             put_extents     (const CpmlPrimitive    *arc,
                                         CpmlExtents            *extents);
static void             put_pair_at     (const CpmlPrimitive    *arc,
                                         double                  pos,
                                         CpmlPair               *pair);
static void             put_vector_at   (const CpmlPrimitive    *arc,
                                         double                  pos,
                                         CpmlVector             *vector);
static void             offset          (CpmlPrimitive          *arc,
                                         double                  offset);
static int              get_center      (const CpmlPair         *p,
                                         CpmlPair               *dest);
static void             get_angles      (const CpmlPair         *p,
                                         const CpmlPair         *center,
                                         double                 *start,
                                         double                 *end);
static void             arc_to_curve    (CpmlPrimitive          *curve,
                                         const CpmlPair         *center,
                                         double                  r,
                                         double                  start,
                                         double                  end);


const _CpmlPrimitiveClass *
_cpml_arc_get_class(void)
{
    static _CpmlPrimitiveClass *p_class = NULL;

    if (p_class == NULL) {
        static _CpmlPrimitiveClass class_data = {
            "arc to", 3,
            get_length,
            put_extents,
            put_pair_at,
            put_vector_at,
            NULL,
            NULL,
            offset,
            NULL
        };
        p_class = &class_data;
    }

    return p_class;
}


/**
 * cpml_arc_info:
 * @arc:    (in):               the #CpmlPrimitive arc data
 * @center: (out) (allow-none): where to store the center coordinates
 * @r:      (out) (allow-none): where to store the radius
 * @start:  (out) (allow-none): where to store the starting angle
 * @end:    (out) (allow-none): where to store the ending angle
 *
 * Given an @arc, this function calculates and returns its basic data.
 * Any pointer can be %NULL, in which case the requested info is not
 * returned. This function can fail (when the three points lay on a
 * straight line, for example) in which case 0 is returned and no
 * data can be considered valid.
 *
 * The radius @r can be 0 when the three points are coincidents: a
 * circle with radius 0 is considered a valid path.
 *
 * When the start and end angle are returned, together with their
 * values these angles implicitely gives another important information:
 * the arc direction.
 *
 * If @start < @end the arc must be rendered with increasing angle
 * value (clockwise direction using the ordinary cairo coordinate
 * system) while if @start > @end the arc must be rendered in reverse
 * order (that is counterclockwise in the cairo world). This is the
 * reason the angle values are returned in the range
 * { -M_PI < value < 3*M_PI } inclusive instead of the usual
 * { -M_PI < value < M_PI } range.
 *
 * Returns: (type boolean): %1 if the function worked succesfully,
 *                          %0 on errors
 *
 * Since: 1.0
 **/
int
cpml_arc_info(const CpmlPrimitive *arc, CpmlPair *center,
              double *r, double *start, double *end)
{
    CpmlPair p[3], l_center;

    cpml_pair_from_cairo(&p[0], arc->org);
    cpml_pair_from_cairo(&p[1], &arc->data[1]);
    cpml_pair_from_cairo(&p[2], &arc->data[2]);

    if (! get_center(p, &l_center))
        return 0;

    if (center)
        *center = l_center;

    if (r != NULL)
        *r = cpml_pair_distance(&p[0], &l_center);

    if (start != NULL || end != NULL) {
        double l_start, l_end;

        get_angles(p, &l_center, &l_start, &l_end);

        if (start != NULL)
            *start = l_start;
        if (end != NULL)
            *end = l_end;
    }

    return 1;
}

/**
 * cpml_arc_to_cairo:
 * @arc: (in):    the #CpmlPrimitive arc data
 * @cr:  (inout): the destination cairo context
 *
 * Renders @arc to the @cr cairo context. As cairo does not support
 * arcs natively, it is approximated using one or more Bézier curves.
 *
 * The number of curves used is dependent from the angle of the arc.
 * Anyway, this function uses internally the hardcoded %M_PI_2 value
 * as threshold value. This means the maximum arc approximated by a
 * single curve will be a quarter of a circle and, consequently, a
 * whole circle will be approximated by 4 Bézier curves.
 *
 * Since: 1.0
 **/
void
cpml_arc_to_cairo(const CpmlPrimitive *arc, cairo_t *cr)
{
    CpmlPair center;
    double r, start, end;
    size_t n_curves;
    double step, angle;
    CpmlPrimitive curve;
    cairo_path_data_t data[4];

    if (!cpml_arc_info(arc, &center, &r, &start, &end))
        return;

    n_curves = ceil(fabs(end-start) / ARC_MAX_ANGLE);
    step = (end-start) / (double) n_curves;
    curve.data = data;

    for (angle = start; n_curves--; angle += step) {
        arc_to_curve(&curve, &center, r, angle, angle+step);
        cairo_curve_to(cr,
                       curve.data[1].point.x, curve.data[1].point.y,
                       curve.data[2].point.x, curve.data[2].point.y,
                       curve.data[3].point.x, curve.data[3].point.y);
    }
}

/**
 * cpml_arc_to_curves:
 * @arc:      (in):  the #CpmlPrimitive arc data
 * @segment:  (out): the destination #CpmlSegment
 * @n_curves: (in):  number of Bézier to use
 *
 * Converts @arc to a serie of @n_curves Bézier curves and puts them
 * inside @segment. Obviously, @segment must have enough space to
 * contain at least @n_curves curves.
 *
 * This function works in a similar way as cpml_arc_to_cairo() but
 * has two important differences: it does not need a cairo context
 * and the number of curves to be generated is explicitely defined.
 * The latter difference allows a more specific error control from
 * the application: in the file src/cairo-arc.c, found in the cairo
 * tarball (at least in cairo-1.9.1), there is a table showing the
 * magnitude of error of this curve approximation algorithm.
 *
 * Since: 1.0
 **/
void
cpml_arc_to_curves(const CpmlPrimitive *arc, CpmlSegment *segment,
                   size_t n_curves)
{
    CpmlPair center;
    double r, start, end;
    double step, angle;
    CpmlPrimitive curve;

    if (!cpml_arc_info(arc, &center, &r, &start, &end))
        return;

    step = (end-start) / (double) n_curves;
    segment->num_data = n_curves*4;
    curve.segment = segment;
    curve.data = segment->data;

    for (angle = start; n_curves--; angle += step) {
        arc_to_curve(&curve, &center, r, angle, angle+step);
        curve.data += 4;
    }
}


static double
get_length(const CpmlPrimitive *arc)
{
    double r, start, end, delta;

    if (!cpml_arc_info(arc, NULL, &r, &start, &end) || start == end)
        return 0.;

    delta = end - start;
    if (delta < 0)
        delta += M_PI*2;

    return r*delta;
}

static void
put_extents(const CpmlPrimitive *arc, CpmlExtents *extents)
{
    double r, start, end;
    CpmlPair center, pair;

    extents->is_defined = 0;

    if (!cpml_arc_info(arc, &center, &r, &start, &end))
        return;

    /* Add the right quadrant point if needed */
    if (ANGLE_INCLUDED(0) || ANGLE_INCLUDED(M_PI * 2)) {
        pair.x = center.x + r;
        pair.y = center.y;
        cpml_extents_pair_add(extents, &pair);
    }

    /* Add the bottom quadrant point if needed */
    if (ANGLE_INCLUDED(M_PI_2) || ANGLE_INCLUDED(M_PI_2 * 5)) {
        pair.x = center.x;
        pair.y = center.y + r;
        cpml_extents_pair_add(extents, &pair);
    }

    /* Add the left quadrant point if needed */
    if (ANGLE_INCLUDED(M_PI)) {
        pair.x = center.x - r;
        pair.y = center.y;
        cpml_extents_pair_add(extents, &pair);
    }

    /* Add the top quadrant point if needed */
    if (ANGLE_INCLUDED(M_PI_2 * 3) || ANGLE_INCLUDED(-M_PI_2)) {
        pair.x = center.x;
        pair.y = center.y - r;
        cpml_extents_pair_add(extents, &pair);
    }

    /* Add the start point */
    cpml_primitive_put_point(arc, 0, &pair);
    cpml_extents_pair_add(extents, &pair);

    /* Add the end point */
    cpml_primitive_put_point(arc, -1, &pair);
    cpml_extents_pair_add(extents, &pair);
}

static void
put_pair_at(const CpmlPrimitive *arc, double pos, CpmlPair *pair)
{
    if (pos == 0.) {
        cpml_pair_from_cairo(pair, arc->org);
    } else if (pos == 1.) {
        cpml_pair_from_cairo(pair, &arc->data[2]);
    } else {
        CpmlPair center;
        double r, start, end, angle;

        if (!cpml_arc_info(arc, &center, &r, &start, &end))
            return;

        angle = (end-start)*pos + start;
        cpml_vector_from_angle(pair, angle);
        cpml_vector_set_length(pair, r);

        pair->x += center.x;
        pair->y += center.y;
    }
}

static void
put_vector_at(const CpmlPrimitive *arc, double pos, CpmlVector *vector)
{
    double start, end, angle;

    if (!cpml_arc_info(arc, NULL, NULL, &start, &end))
        return;

    angle = (end-start)*pos + start;
    cpml_vector_from_angle(vector, angle);
    cpml_vector_normal(vector);

    if (start > end) {
        vector->x = -vector->x;
        vector->y = -vector->y;
    }
}

static void
offset(CpmlPrimitive *arc, double offset)
{
    CpmlPair p[3], center;
    double r;

    cpml_pair_from_cairo(&p[0], arc->org);
    cpml_pair_from_cairo(&p[1], &arc->data[1]);
    cpml_pair_from_cairo(&p[2], &arc->data[2]);

    if (!get_center(p, &center))
        return;

    r = cpml_pair_distance(&p[0], &center) + offset;

    /* Offset the three points by calculating their vector from the center,
     * setting the new radius as length and readding the center */
    p[0].x -= center.x;
    p[0].y -= center.y;
    p[1].x -= center.x;
    p[1].y -= center.y;
    p[2].x -= center.x;
    p[2].y -= center.y;

    cpml_vector_set_length(&p[0], r);
    cpml_vector_set_length(&p[1], r);
    cpml_vector_set_length(&p[2], r);

    p[0].x += center.x;
    p[0].y += center.y;
    p[1].x += center.x;
    p[1].y += center.y;
    p[2].x += center.x;
    p[2].y += center.y;

    cpml_pair_to_cairo(&p[0], arc->org);
    cpml_pair_to_cairo(&p[1], &arc->data[1]);
    cpml_pair_to_cairo(&p[2], &arc->data[2]);
}

static int
get_center(const CpmlPair *p, CpmlPair *dest)
{
    CpmlPair b, c;
    double d, b2, c2;

    /* When p[0] == p[2], p[0]..p[1] is considered the diameter of a circle */
    if (p[0].x == p[2].x && p[0].y == p[2].y) {
        dest->x = (p[0].x + p[1].x) / 2;
        dest->y = (p[0].y + p[1].y) / 2;
        return 1;
    }

    /* Translate the 3 points of -p0, to simplify the formula */
    b.x = p[1].x - p[0].x;
    b.y = p[1].y - p[0].y;
    c.x = p[2].x - p[0].x;
    c.y = p[2].y - p[0].y;

    /* Check for division by 0, that is the case where the 3 given points
     * are laying on a straight line and there is no fitting circle */
    d = (b.x*c.y - b.y*c.x) * 2;
    if (d == 0.)
        return 0;

    b2 = b.x*b.x + b.y*b.y;
    c2 = c.x*c.x + c.y*c.y;

    dest->x = (c.y*b2 - b.y*c2) / d + p[0].x;
    dest->y = (b.x*c2 - c.x*b2) / d + p[0].y;

    return 1;
}

static void
get_angles(const CpmlPair *p, const CpmlPair *center,
           double *start, double *end)
{
    CpmlVector vector;
    double mid;

    /* Calculate the starting angle */
    vector.x = p[0].x - center->x;
    vector.y = p[0].y - center->y;
    *start = cpml_vector_angle(&vector);

    if (p[0].x == p[2].x && p[0].y == p[2].y) {
        /* When p[0] and p[2] are cohincidents, p[0]..p[1] is the diameter
         * of a circle: return by convention start=start end=start+2PI */
        *end = *start + M_PI*2;
    } else {
        /* Calculate the mid and end angle: cpml_vector_angle()
         * returns an angle between -M_PI and M_PI */
        vector.x = p[1].x - center->x;
        vector.y = p[1].y - center->y;
        mid = cpml_vector_angle(&vector);
        vector.x = p[2].x - center->x;
        vector.y = p[2].y - center->y;
        *end = cpml_vector_angle(&vector);

        if (*end > *start) {
            /* If the middle angle is outside the start..end range,
             * the arc should be reversed (that is, start must
             * be greather than end) */
            if (mid < *start || mid > *end)
                *start += M_PI*2;
        } else {
            /* Here the arc is reversed: if the middle angle is
             * outside the end..start range, the arc should be
             * re-reversed to get a straight arc (that is, end
             * must be greather than start) */
            if (mid < *end || mid > *start)
                *end += M_PI*2;
        }
    }
}

static void
arc_to_curve(CpmlPrimitive *curve, const CpmlPair *center,
             double r, double start, double end)
{
    double r_sin1, r_cos1;
    double r_sin2, r_cos2;
    double h;

    r_sin1 = r*sin(start);
    r_cos1 = r*cos(start);
    r_sin2 = r*sin(end);
    r_cos2 = r*cos(end);

    h = 4./3. * tan((end-start) / 4.);

    curve->data[0].header.type = CPML_CURVE;
    curve->data[0].header.length = 4;
    curve->data[1].point.x = center->x + r_cos1 - h*r_sin1;
    curve->data[1].point.y = center->y + r_sin1 + h*r_cos1;
    curve->data[2].point.x = center->x + r_cos2 + h*r_sin2;
    curve->data[2].point.y = center->y + r_sin2 - h*r_cos2;
    curve->data[3].point.x = center->x + r_cos2;
    curve->data[3].point.y = center->y + r_sin2;
}