selftest/target/Samba3.pm

   1 #!/usr/bin/perl
   2 # Bootstrap Samba and run a number of tests against it.
   3 # Copyright (C) 2005-2007 Jelmer Vernooij <jelmer@samba.org>
   4 # Published under the GNU GPL, v3 or later.
   5
   6 package Samba3;
   7
   8 use strict;
   9 use Cwd qw(abs_path);
  10 use FindBin qw($RealBin);
  11 use POSIX;
  12 use target::Samba;
  13
  14 sub have_ads($) {
  15         my ($self) = @_;
  16         my $found_ads = 0;
  17         my $smbd_build_options = Samba::bindir_path($self, "smbd") . " -b|";
  18         open(IN, $smbd_build_options) or die("Unable to run $smbd_build_options: $!");
  19
  20         while (<IN>) {
  21                 if (/WITH_ADS/) {
  22                        $found_ads = 1;
  23                 }
  24         }
  25         close IN;
  26
  27         # If we were not built with ADS support, pretend we were never even available
  28         print "smbd does not have ADS support\n" unless $found_ads;
  29         return $found_ads;
  30 }
  31
  32 # return smb.conf parameters applicable to @path, based on the underlying
  33 # filesystem type
  34 sub get_fs_specific_conf($$)
  35 {
  36         my ($self, $path) = @_;
  37         my $mods = "";
  38         my $stat_out = `stat --file-system $path` or return "";
  39
  40         if ($stat_out =~ m/Type:\s+btrfs/) {
  41                 $mods .= "btrfs ";
  42         }
  43
  44         if ($mods) {
  45                 return "vfs objects = $mods";
  46         }
  47
  48         return undef;
  49 }
  50
  51 sub new($$) {
  52         my ($classname, $bindir, $binary_mapping, $srcdir, $server_maxtime) = @_;
  53         my $self = { vars => {},
  54                      bindir => $bindir,
  55                      binary_mapping => $binary_mapping,
  56                      srcdir => $srcdir,
  57                      server_maxtime => $server_maxtime
  58         };
  59         bless $self;
  60         return $self;
  61 }
  62
  63 sub teardown_env($$)
  64 {
  65         my ($self, $envvars) = @_;
  66         my $count = 0;
  67
  68         # This should cause smbd to terminate gracefully
  69         close($envvars->{STDIN_PIPE});
  70
  71         my $smbdpid = $envvars->{SMBD_TL_PID};
  72         my $nmbdpid = $envvars->{NMBD_TL_PID};
  73         my $winbinddpid = $envvars->{WINBINDD_TL_PID};
  74
  75         # This should give it time to write out the gcov data
  76         until ($count > 20) {
  77             my $smbdchild = Samba::cleanup_child($smbdpid, "smbd");
  78             my $nmbdchild = Samba::cleanup_child($nmbdpid, "nmbd");
  79             my $winbinddchild = Samba::cleanup_child($winbinddpid, "winbindd");
  80             if ($smbdchild == -1
  81                 && $nmbdchild == -1
  82                 && $winbinddchild == -1) {
  83                 last;
  84             }
  85             sleep(1);
  86             $count++;
  87         }
  88
  89         if ($count <= 20 && kill(0, $smbdpid, $nmbdpid, $winbinddpid) == 0) {
  90             return;
  91         }
  92
  93         $self->stop_sig_term($smbdpid);
  94         $self->stop_sig_term($nmbdpid);
  95         $self->stop_sig_term($winbinddpid);
  96
  97         $count = 0;
  98         until ($count > 10) {
  99             my $smbdchild = Samba::cleanup_child($smbdpid, "smbd");
 100             my $nmbdchild = Samba::cleanup_child($nmbdpid, "nmbd");
 101             my $winbinddchild = Samba::cleanup_child($winbinddpid, "winbindd");
 102             if ($smbdchild == -1
 103                 && $nmbdchild == -1
 104                 && $winbinddchild == -1) {
 105                 last;
 106             }
 107             sleep(1);
 108             $count++;
 109         }
 110
 111         if ($count <= 10 && kill(0, $smbdpid, $nmbdpid, $winbinddpid) == 0) {
 112             return;
 113         }
 114
 115         warn("timelimit process did not quit on SIGTERM, sending SIGKILL");
 116         $self->stop_sig_kill($smbdpid);
 117         $self->stop_sig_kill($nmbdpid);
 118         $self->stop_sig_kill($winbinddpid);
 119
 120         return 0;
 121 }
 122
 123 sub getlog_env_app($$$)
 124 {
 125         my ($self, $envvars, $name) = @_;
 126
 127         my $title = "$name LOG of: $envvars->{NETBIOSNAME}\n";
 128         my $out = $title;
 129
 130         open(LOG, "<".$envvars->{$name."_TEST_LOG"});
 131
 132         seek(LOG, $envvars->{$name."_TEST_LOG_POS"}, SEEK_SET);
 133         while (<LOG>) {
 134                 $out .= $_;
 135         }
 136         $envvars->{$name."_TEST_LOG_POS"} = tell(LOG);
 137         close(LOG);
 138
 139         return "" if $out eq $title;
 140
 141         return $out;
 142 }
 143
 144 sub getlog_env($$)
 145 {
 146         my ($self, $envvars) = @_;
 147         my $ret = "";
 148
 149         $ret .= $self->getlog_env_app($envvars, "SMBD");
 150         $ret .= $self->getlog_env_app($envvars, "NMBD");
 151         $ret .= $self->getlog_env_app($envvars, "WINBINDD");
 152
 153         return $ret;
 154 }
 155
 156 sub check_env($$)
 157 {
 158         my ($self, $envvars) = @_;
 159
 160         my $childpid = waitpid(-1, WNOHANG);
 161
 162         # TODO ...
 163         return 1;
 164 }
 165
 166 sub setup_env($$$)
 167 {
 168         my ($self, $envname, $path) = @_;
 169
 170         $ENV{ENVNAME} = $envname;
 171
 172         if (defined($self->{vars}->{$envname})) {
 173                 return $self->{vars}->{$envname};
 174         }
 175
 176         if ($envname eq "s3dc") {
 177                 return $self->setup_s3dc("$path/s3dc");
 178         } elsif ($envname eq "simpleserver") {
 179                 return $self->setup_simpleserver("$path/simpleserver");
 180         } elsif ($envname eq "maptoguest") {
 181                 return $self->setup_maptoguest("$path/maptoguest");
 182         } elsif ($envname eq "ktest") {
 183                 return $self->setup_ktest("$path/ktest");
 184         } elsif ($envname eq "member") {
 185                 if (not defined($self->{vars}->{s3dc})) {
 186                         if (not defined($self->setup_s3dc("$path/s3dc"))) {
 187                                 return undef;
 188                         }
 189                 }
 190                 return $self->setup_member("$path/member", $self->{vars}->{s3dc});
 191         } else {
 192                 return "UNKNOWN";
 193         }
 194 }
 195
 196 sub setup_s3dc($$)
 197 {
 198         my ($self, $path) = @_;
 199
 200         print "PROVISIONING S3DC...";
 201
 202         my $s3dc_options = "
 203         domain master = yes
 204         domain logons = yes
 205         lanman auth = yes
 206
 207         rpc_server:epmapper = external
 208         rpc_server:spoolss = external
 209         rpc_server:lsarpc = external
 210         rpc_server:samr = external
 211         rpc_server:netlogon = external
 212         rpc_server:register_embedded_np = yes
 213
 214         rpc_daemon:epmd = fork
 215         rpc_daemon:spoolssd = fork
 216         rpc_daemon:lsasd = fork
 217 ";
 218
 219         my $vars = $self->provision($path,
 220                                     "LOCALS3DC2",
 221                                     "locals3dc2pass",
 222                                     $s3dc_options);
 223
 224         $vars or return undef;
 225
 226         if (not $self->check_or_start($vars, "yes", "yes", "yes")) {
 227                return undef;
 228         }
 229
 230         $vars->{DC_SERVER} = $vars->{SERVER};
 231         $vars->{DC_SERVER_IP} = $vars->{SERVER_IP};
 232         $vars->{DC_NETBIOSNAME} = $vars->{NETBIOSNAME};
 233         $vars->{DC_USERNAME} = $vars->{USERNAME};
 234         $vars->{DC_PASSWORD} = $vars->{PASSWORD};
 235
 236         $self->{vars}->{s3dc} = $vars;
 237
 238         return $vars;
 239 }
 240
 241 sub setup_member($$$)
 242 {
 243         my ($self, $prefix, $s3dcvars) = @_;
 244
 245         print "PROVISIONING MEMBER...";
 246
 247         my $member_options = "
 248         security = domain
 249         server signing = on
 250 ";
 251         my $ret = $self->provision($prefix,
 252                                    "LOCALMEMBER3",
 253                                    "localmember3pass",
 254                                    $member_options);
 255
 256         $ret or return undef;
 257
 258         my $net = Samba::bindir_path($self, "net");
 259         my $cmd = "";
 260         $cmd .= "SOCKET_WRAPPER_DEFAULT_IFACE=\"$ret->{SOCKET_WRAPPER_DEFAULT_IFACE}\" ";
 261         $cmd .= "$net join $ret->{CONFIGURATION} $s3dcvars->{DOMAIN} member";
 262         $cmd .= " -U$s3dcvars->{USERNAME}\%$s3dcvars->{PASSWORD}";
 263
 264         if (system($cmd) != 0) {
 265             warn("Join failed\n$cmd");
 266             return undef;
 267         }
 268
 269         if (not $self->check_or_start($ret, "yes", "yes", "yes")) {
 270                return undef;
 271         }
 272
 273         $ret->{DC_SERVER} = $s3dcvars->{SERVER};
 274         $ret->{DC_SERVER_IP} = $s3dcvars->{SERVER_IP};
 275         $ret->{DC_NETBIOSNAME} = $s3dcvars->{NETBIOSNAME};
 276         $ret->{DC_USERNAME} = $s3dcvars->{USERNAME};
 277         $ret->{DC_PASSWORD} = $s3dcvars->{PASSWORD};
 278
 279         return $ret;
 280 }
 281
 282 sub setup_admember($$$$)
 283 {
 284         my ($self, $prefix, $dcvars) = @_;
 285
 286         # If we didn't build with ADS, pretend this env was never available
 287         if (not $self->have_ads()) {
 288                 return "UNKNOWN";
 289         }
 290
 291         print "PROVISIONING S3 AD MEMBER...";
 292
 293         my $member_options = "
 294         security = ads
 295         server signing = on
 296         workgroup = $dcvars->{DOMAIN}
 297         realm = $dcvars->{REALM}
 298 ";
 299
 300         my $ret = $self->provision($prefix,
 301                                    "LOCALADMEMBER",
 302                                    "loCalMemberPass",
 303                                    $member_options);
 304
 305         $ret or return undef;
 306
 307         close(USERMAP);
 308         $ret->{DOMAIN} = $dcvars->{DOMAIN};
 309         $ret->{REALM} = $dcvars->{REALM};
 310
 311         my $ctx;
 312         my $prefix_abs = abs_path($prefix);
 313         $ctx = {};
 314         $ctx->{krb5_conf} = "$prefix_abs/lib/krb5.conf";
 315         $ctx->{domain} = $dcvars->{DOMAIN};
 316         $ctx->{realm} = $dcvars->{REALM};
 317         $ctx->{dnsname} = lc($dcvars->{REALM});
 318         $ctx->{kdc_ipv4} = $dcvars->{SERVER_IP};
 319         Samba::mk_krb5_conf($ctx, "");
 320
 321         $ret->{KRB5_CONFIG} = $ctx->{krb5_conf};
 322
 323         my $net = Samba::bindir_path($self, "net");
 324         my $cmd = "";
 325         $cmd .= "SOCKET_WRAPPER_DEFAULT_IFACE=\"$ret->{SOCKET_WRAPPER_DEFAULT_IFACE}\" ";
 326         $cmd .= "KRB5_CONFIG=\"$ret->{KRB5_CONFIG}\" ";
 327         $cmd .= "$net join $ret->{CONFIGURATION}";
 328         $cmd .= " -U$dcvars->{USERNAME}\%$dcvars->{PASSWORD}";
 329
 330         if (system($cmd) != 0) {
 331             warn("Join failed\n$cmd");
 332             return undef;
 333         }
 334
 335         # We need world access to this share, as otherwise the domain
 336         # administrator from the AD domain provided by Samba4 can't
 337         # access the share for tests.
 338         chmod 0777, "$prefix/share";
 339
 340         if (not $self->check_or_start($ret, "yes", "yes", "yes")) {
 341                 return undef;
 342         }
 343
 344         $ret->{DC_SERVER} = $dcvars->{SERVER};
 345         $ret->{DC_SERVER_IP} = $dcvars->{SERVER_IP};
 346         $ret->{DC_NETBIOSNAME} = $dcvars->{NETBIOSNAME};
 347         $ret->{DC_USERNAME} = $dcvars->{USERNAME};
 348         $ret->{DC_PASSWORD} = $dcvars->{PASSWORD};
 349
 350         # Special case, this is called from Samba4.pm but needs to use the Samba3 check_env and get_log_env
 351         $ret->{target} = $self;
 352
 353         return $ret;
 354 }
 355
 356 sub setup_admember_rfc2307($$$$)
 357 {
 358         my ($self, $prefix, $dcvars) = @_;
 359
 360         # If we didn't build with ADS, pretend this env was never available
 361         if (not $self->have_ads()) {
 362                 return "UNKNOWN";
 363         }
 364
 365         print "PROVISIONING S3 AD MEMBER WITH idmap_rfc2307 config...";
 366
 367         my $member_options = "
 368         security = ads
 369         server signing = on
 370         workgroup = $dcvars->{DOMAIN}
 371         realm = $dcvars->{REALM}
 372         idmap config $dcvars->{DOMAIN} : backend = rfc2307
 373         idmap config $dcvars->{DOMAIN} : range = 2000000-2999999
 374         idmap config $dcvars->{DOMAIN} : ldap_server = ad
 375         idmap config $dcvars->{DOMAIN} : bind_path_user = ou=idmap,dc=samba,dc=example,dc=com
 376         idmap config $dcvars->{DOMAIN} : bind_path_group = ou=idmap,dc=samba,dc=example,dc=com
 377 ";
 378
 379         my $ret = $self->provision($prefix,
 380                                    "RFC2307MEMBER",
 381                                    "loCalMemberPass",
 382                                    $member_options);
 383
 384         $ret or return undef;
 385
 386         close(USERMAP);
 387         $ret->{DOMAIN} = $dcvars->{DOMAIN};
 388         $ret->{REALM} = $dcvars->{REALM};
 389
 390         my $ctx;
 391         my $prefix_abs = abs_path($prefix);
 392         $ctx = {};
 393         $ctx->{krb5_conf} = "$prefix_abs/lib/krb5.conf";
 394         $ctx->{domain} = $dcvars->{DOMAIN};
 395         $ctx->{realm} = $dcvars->{REALM};
 396         $ctx->{dnsname} = lc($dcvars->{REALM});
 397         $ctx->{kdc_ipv4} = $dcvars->{SERVER_IP};
 398         Samba::mk_krb5_conf($ctx, "");
 399
 400         $ret->{KRB5_CONFIG} = $ctx->{krb5_conf};
 401
 402         my $net = Samba::bindir_path($self, "net");
 403         my $cmd = "";
 404         $cmd .= "SOCKET_WRAPPER_DEFAULT_IFACE=\"$ret->{SOCKET_WRAPPER_DEFAULT_IFACE}\" ";
 405         $cmd .= "KRB5_CONFIG=\"$ret->{KRB5_CONFIG}\" ";
 406         $cmd .= "$net join $ret->{CONFIGURATION}";
 407         $cmd .= " -U$dcvars->{USERNAME}\%$dcvars->{PASSWORD}";
 408
 409         if (system($cmd) != 0) {
 410             warn("Join failed\n$cmd");
 411             return undef;
 412         }
 413
 414         # We need world access to this share, as otherwise the domain
 415         # administrator from the AD domain provided by Samba4 can't
 416         # access the share for tests.
 417         chmod 0777, "$prefix/share";
 418
 419         if (not $self->check_or_start($ret, "yes", "yes", "yes")) {
 420                 return undef;
 421         }
 422
 423         $ret->{DC_SERVER} = $dcvars->{SERVER};
 424         $ret->{DC_SERVER_IP} = $dcvars->{SERVER_IP};
 425         $ret->{DC_NETBIOSNAME} = $dcvars->{NETBIOSNAME};
 426         $ret->{DC_USERNAME} = $dcvars->{USERNAME};
 427         $ret->{DC_PASSWORD} = $dcvars->{PASSWORD};
 428
 429         # Special case, this is called from Samba4.pm but needs to use the Samba3 check_env and get_log_env
 430         $ret->{target} = $self;
 431
 432         return $ret;
 433 }
 434
 435 sub setup_simpleserver($$)
 436 {
 437         my ($self, $path) = @_;
 438
 439         print "PROVISIONING server with security=share...";
 440
 441         my $prefix_abs = abs_path($path);
 442
 443         my $simpleserver_options = "
 444         lanman auth = yes
 445         vfs objects = xattr_tdb streams_depot
 446
 447 [vfs_aio_fork]
 448         path = $prefix_abs/share
 449         vfs objects = aio_fork
 450         read only = no
 451         vfs_aio_fork:erratic_testing_mode=yes
 452 ";
 453
 454         my $vars = $self->provision($path,
 455                                     "LOCALSHARE4",
 456                                     "local4pass",
 457                                     $simpleserver_options);
 458
 459         $vars or return undef;
 460
 461         if (not $self->check_or_start($vars, "yes", "no", "yes")) {
 462                return undef;
 463         }
 464
 465         $self->{vars}->{simpleserver} = $vars;
 466
 467         return $vars;
 468 }
 469
 470 sub setup_ktest($$$)
 471 {
 472         my ($self, $prefix) = @_;
 473
 474         # If we didn't build with ADS, pretend this env was never available
 475         if (not $self->have_ads()) {
 476                 return "UNKNOWN";
 477         }
 478
 479         print "PROVISIONING server with security=ads...";
 480
 481         my $ktest_options = "
 482         workgroup = KTEST
 483         realm = ktest.samba.example.com
 484         security = ads
 485         username map = $prefix/lib/username.map
 486         server signing = required
 487 ";
 488
 489         my $ret = $self->provision($prefix,
 490                                    "LOCALKTEST6",
 491                                    "localktest6pass",
 492                                    $ktest_options);
 493
 494         $ret or return undef;
 495
 496         my $ctx;
 497         my $prefix_abs = abs_path($prefix);
 498         $ctx = {};
 499         $ctx->{krb5_conf} = "$prefix_abs/lib/krb5.conf";
 500         $ctx->{domain} = "KTEST";
 501         $ctx->{realm} = "KTEST.SAMBA.EXAMPLE.COM";
 502         $ctx->{dnsname} = lc($ctx->{realm});
 503         $ctx->{kdc_ipv4} = "0.0.0.0";
 504         Samba::mk_krb5_conf($ctx, "");
 505
 506         $ret->{KRB5_CONFIG} = $ctx->{krb5_conf};
 507
 508         open(USERMAP, ">$prefix/lib/username.map") or die("Unable to open $prefix/lib/username.map");
 509         print USERMAP "
 510 $ret->{USERNAME} = KTEST\\Administrator
 511 ";
 512         close(USERMAP);
 513
 514 #This is the secrets.tdb created by 'net ads join' from Samba3 to a
 515 #Samba4 DC with the same parameters as are being used here.  The
 516 #domain SID is S-1-5-21-1071277805-689288055-3486227160
 517
 518         system("cp $self->{srcdir}/source3/selftest/ktest-secrets.tdb $prefix/private/secrets.tdb");
 519         chmod 0600, "$prefix/private/secrets.tdb";
 520
 521 #Make sure there's no old ntdb file.
 522         system("rm -f $prefix/private/secrets.ntdb");
 523
 524 #This uses a pre-calculated krb5 credentials cache, obtained by running Samba4 with:
 525 # "--option=kdc:service ticket lifetime=239232" "--option=kdc:user ticket lifetime=239232" "--option=kdc:renewal lifetime=239232"
 526 #
 527 #and having in krb5.conf:
 528 # ticket_lifetime = 799718400
 529 # renew_lifetime = 799718400
 530 #
 531 # The commands for the -2 keytab where were:
 532 # kinit administrator@KTEST.SAMBA.EXAMPLE.COM
 533 # kvno host/localktest6@KTEST.SAMBA.EXAMPLE.COM
 534 # kvno cifs/localktest6@KTEST.SAMBA.EXAMPLE.COM
 535 # kvno host/LOCALKTEST6@KTEST.SAMBA.EXAMPLE.COM
 536 # kvno cifs/LOCALKTEST6@KTEST.SAMBA.EXAMPLE.COM
 537 #
 538 # and then for the -3 keytab, I did
 539 #
 540 # net changetrustpw; kdestroy and the same again.
 541 #
 542 # This creates a credential cache with a very long lifetime (2036 at
 543 # at 2011-04), and shows that running 'net changetrustpw' does not
 544 # break existing logins (for the secrets.tdb method at least).
 545 #
 546
 547         $ret->{KRB5_CCACHE}="FILE:$prefix/krb5_ccache";
 548
 549         system("cp $self->{srcdir}/source3/selftest/ktest-krb5_ccache-2 $prefix/krb5_ccache-2");
 550         chmod 0600, "$prefix/krb5_ccache-2";
 551
 552         system("cp $self->{srcdir}/source3/selftest/ktest-krb5_ccache-3 $prefix/krb5_ccache-3");
 553         chmod 0600, "$prefix/krb5_ccache-3";
 554
 555         # We need world access to this share, as otherwise the domain
 556         # administrator from the AD domain provided by ktest can't
 557         # access the share for tests.
 558         chmod 0777, "$prefix/share";
 559
 560         if (not $self->check_or_start($ret, "yes", "no", "yes")) {
 561                return undef;
 562         }
 563         return $ret;
 564 }
 565
 566 sub setup_maptoguest($$)
 567 {
 568         my ($self, $path) = @_;
 569
 570         print "PROVISIONING maptoguest...";
 571
 572         my $options = "
 573 map to guest = bad user
 574 ";
 575
 576         my $vars = $self->provision($path,
 577                                     "maptoguest",
 578                                     "maptoguestpass",
 579                                     $options);
 580
 581         $vars or return undef;
 582
 583         if (not $self->check_or_start($vars, "yes", "no", "yes")) {
 584                return undef;
 585         }
 586
 587         $self->{vars}->{s3maptoguest} = $vars;
 588
 589         return $vars;
 590 }
 591
 592 sub stop_sig_term($$) {
 593         my ($self, $pid) = @_;
 594         kill("USR1", $pid) or kill("ALRM", $pid) or warn("Unable to kill $pid: $!");
 595 }
 596
 597 sub stop_sig_kill($$) {
 598         my ($self, $pid) = @_;
 599         kill("ALRM", $pid) or warn("Unable to kill $pid: $!");
 600 }
 601
 602 sub write_pid($$$)
 603 {
 604         my ($env_vars, $app, $pid) = @_;
 605
 606         open(PID, ">$env_vars->{PIDDIR}/timelimit.$app.pid");
 607         print PID $pid;
 608         close(PID);
 609 }
 610
 611 sub read_pid($$)
 612 {
 613         my ($env_vars, $app) = @_;
 614
 615         open(PID, "<$env_vars->{PIDDIR}/timelimit.$app.pid");
 616         my $pid = <PID>;
 617         close(PID);
 618         return $pid;
 619 }
 620
 621 sub check_or_start($$$$$) {
 622         my ($self, $env_vars, $nmbd, $winbindd, $smbd) = @_;
 623
 624         # use a pipe for stdin in the child processes. This allows
 625         # those processes to monitor the pipe for EOF to ensure they
 626         # exit when the test script exits
 627         pipe(STDIN_READER, $env_vars->{STDIN_PIPE});
 628
 629         unlink($env_vars->{NMBD_TEST_LOG});
 630         print "STARTING NMBD...";
 631         my $pid = fork();
 632         if ($pid == 0) {
 633                 open STDOUT, ">$env_vars->{NMBD_TEST_LOG}";
 634                 open STDERR, '>&STDOUT';
 635
 636                 SocketWrapper::set_default_iface($env_vars->{SOCKET_WRAPPER_DEFAULT_IFACE});
 637
 638                 $ENV{KRB5_CONFIG} = $env_vars->{KRB5_CONFIG};
 639                 $ENV{WINBINDD_SOCKET_DIR} = $env_vars->{WINBINDD_SOCKET_DIR};
 640                 $ENV{NMBD_SOCKET_DIR} = $env_vars->{NMBD_SOCKET_DIR};
 641
 642                 $ENV{NSS_WRAPPER_PASSWD} = $env_vars->{NSS_WRAPPER_PASSWD};
 643                 $ENV{NSS_WRAPPER_GROUP} = $env_vars->{NSS_WRAPPER_GROUP};
 644                 $ENV{NSS_WRAPPER_MODULE_SO_PATH} = $env_vars->{NSS_WRAPPER_MODULE_SO_PATH};
 645                 $ENV{NSS_WRAPPER_MODULE_FN_PREFIX} = $env_vars->{NSS_WRAPPER_MODULE_FN_PREFIX};
 646
 647                 $ENV{ENVNAME} = "$ENV{ENVNAME}.nmbd";
 648
 649                 if ($nmbd ne "yes") {
 650                         $SIG{USR1} = $SIG{ALRM} = $SIG{INT} = $SIG{QUIT} = $SIG{TERM} = sub {
 651                                 my $signame = shift;
 652                                 print("Skip nmbd received signal $signame");
 653                                 exit 0;
 654                         };
 655                         sleep($self->{server_maxtime});
 656                         exit 0;
 657                 }
 658
 659                 $ENV{MAKE_TEST_BINARY} = Samba::bindir_path($self, "nmbd");
 660                 my @optargs = ("-d0");
 661                 if (defined($ENV{NMBD_OPTIONS})) {
 662                         @optargs = split(/ /, $ENV{NMBD_OPTIONS});
 663                 }
 664                 my @preargs = (Samba::bindir_path($self, "timelimit"), $self->{server_maxtime});
 665                 if(defined($ENV{NMBD_VALGRIND})) {
 666                         @preargs = split(/ /, $ENV{NMBD_VALGRIND});
 667                 }
 668                 my @args = ("-F", "--no-process-group",
 669                             "-s", $env_vars->{SERVERCONFFILE},
 670                             "-l", $env_vars->{LOGDIR});
 671                 if (not defined($ENV{NMBD_DONT_LOG_STDOUT})) {
 672                         push(@args, "--log-stdout");
 673                 }
 674
 675                 close($env_vars->{STDIN_PIPE});
 676                 open STDIN, ">&", \*STDIN_READER or die "can't dup STDIN_READER to STDIN: $!";
 677
 678                 exec(@preargs, $ENV{MAKE_TEST_BINARY}, @args, @optargs)
 679                         or die("Unable to start $ENV{MAKE_TEST_BINARY}: $!");
 680         }
 681         $env_vars->{NMBD_TL_PID} = $pid;
 682         write_pid($env_vars, "nmbd", $pid);
 683         print "DONE\n";
 684
 685         unlink($env_vars->{WINBINDD_TEST_LOG});
 686         print "STARTING WINBINDD...";
 687         $pid = fork();
 688         if ($pid == 0) {
 689                 open STDOUT, ">$env_vars->{WINBINDD_TEST_LOG}";
 690                 open STDERR, '>&STDOUT';
 691
 692                 SocketWrapper::set_default_iface($env_vars->{SOCKET_WRAPPER_DEFAULT_IFACE});
 693
 694                 $ENV{KRB5_CONFIG} = $env_vars->{KRB5_CONFIG};
 695                 $ENV{WINBINDD_SOCKET_DIR} = $env_vars->{WINBINDD_SOCKET_DIR};
 696                 $ENV{NMBD_SOCKET_DIR} = $env_vars->{NMBD_SOCKET_DIR};
 697
 698                 $ENV{NSS_WRAPPER_PASSWD} = $env_vars->{NSS_WRAPPER_PASSWD};
 699                 $ENV{NSS_WRAPPER_GROUP} = $env_vars->{NSS_WRAPPER_GROUP};
 700                 $ENV{NSS_WRAPPER_MODULE_SO_PATH} = $env_vars->{NSS_WRAPPER_MODULE_SO_PATH};
 701                 $ENV{NSS_WRAPPER_MODULE_FN_PREFIX} = $env_vars->{NSS_WRAPPER_MODULE_FN_PREFIX};
 702
 703                 $ENV{ENVNAME} = "$ENV{ENVNAME}.winbindd";
 704
 705                 if ($winbindd ne "yes") {
 706                         $SIG{USR1} = $SIG{ALRM} = $SIG{INT} = $SIG{QUIT} = $SIG{TERM} = sub {
 707                                 my $signame = shift;
 708                                 print("Skip winbindd received signal $signame");
 709                                 exit 0;
 710                         };
 711                         sleep($self->{server_maxtime});
 712                         exit 0;
 713                 }
 714
 715                 $ENV{MAKE_TEST_BINARY} = Samba::bindir_path($self, "winbindd");
 716                 my @optargs = ("-d0");
 717                 if (defined($ENV{WINBINDD_OPTIONS})) {
 718                         @optargs = split(/ /, $ENV{WINBINDD_OPTIONS});
 719                 }
 720                 my @preargs = (Samba::bindir_path($self, "timelimit"), $self->{server_maxtime});
 721                 if(defined($ENV{WINBINDD_VALGRIND})) {
 722                         @preargs = split(/ /, $ENV{WINBINDD_VALGRIND});
 723                 }
 724                 my @args = ("-F", "--no-process-group",
 725                             "-s", $env_vars->{SERVERCONFFILE},
 726                             "-l", $env_vars->{LOGDIR});
 727                 if (not defined($ENV{WINBINDD_DONT_LOG_STDOUT})) {
 728                         push(@args, "--stdout");
 729                 }
 730
 731                 close($env_vars->{STDIN_PIPE});
 732                 open STDIN, ">&", \*STDIN_READER or die "can't dup STDIN_READER to STDIN: $!";
 733
 734                 exec(@preargs, $ENV{MAKE_TEST_BINARY}, @args, @optargs)
 735                         or die("Unable to start $ENV{MAKE_TEST_BINARY}: $!");
 736         }
 737         $env_vars->{WINBINDD_TL_PID} = $pid;
 738         write_pid($env_vars, "winbindd", $pid);
 739         print "DONE\n";
 740
 741         unlink($env_vars->{SMBD_TEST_LOG});
 742         print "STARTING SMBD...";
 743         $pid = fork();
 744         if ($pid == 0) {
 745                 open STDOUT, ">$env_vars->{SMBD_TEST_LOG}";
 746                 open STDERR, '>&STDOUT';
 747
 748                 SocketWrapper::set_default_iface($env_vars->{SOCKET_WRAPPER_DEFAULT_IFACE});
 749
 750                 $ENV{KRB5_CONFIG} = $env_vars->{KRB5_CONFIG};
 751                 $ENV{WINBINDD_SOCKET_DIR} = $env_vars->{WINBINDD_SOCKET_DIR};
 752                 $ENV{NMBD_SOCKET_DIR} = $env_vars->{NMBD_SOCKET_DIR};
 753
 754                 $ENV{NSS_WRAPPER_PASSWD} = $env_vars->{NSS_WRAPPER_PASSWD};
 755                 $ENV{NSS_WRAPPER_GROUP} = $env_vars->{NSS_WRAPPER_GROUP};
 756                 $ENV{NSS_WRAPPER_MODULE_SO_PATH} = $env_vars->{NSS_WRAPPER_MODULE_SO_PATH};
 757                 $ENV{NSS_WRAPPER_MODULE_FN_PREFIX} = $env_vars->{NSS_WRAPPER_MODULE_FN_PREFIX};
 758
 759                 $ENV{ENVNAME} = "$ENV{ENVNAME}.smbd";
 760
 761                 if ($smbd ne "yes") {
 762                         $SIG{USR1} = $SIG{ALRM} = $SIG{INT} = $SIG{QUIT} = $SIG{TERM} = sub {
 763                                 my $signame = shift;
 764                                 print("Skip smbd received signal $signame");
 765                                 exit 0;
 766                         };
 767                         sleep($self->{server_maxtime});
 768                         exit 0;
 769                 }
 770
 771                 $ENV{MAKE_TEST_BINARY} = Samba::bindir_path($self, "smbd");
 772                 my @optargs = ("-d0");
 773                 if (defined($ENV{SMBD_OPTIONS})) {
 774                         @optargs = split(/ /, $ENV{SMBD_OPTIONS});
 775                 }
 776                 my @preargs = (Samba::bindir_path($self, "timelimit"), $self->{server_maxtime});
 777                 if(defined($ENV{SMBD_VALGRIND})) {
 778                         @preargs = split(/ /,$ENV{SMBD_VALGRIND});
 779                 }
 780                 my @args = ("-F", "--no-process-group",
 781                             "-s", $env_vars->{SERVERCONFFILE},
 782                             "-l", $env_vars->{LOGDIR});
 783                 if (not defined($ENV{SMBD_DONT_LOG_STDOUT})) {
 784                         push(@args, "--log-stdout");
 785                 }
 786
 787                 close($env_vars->{STDIN_PIPE});
 788                 open STDIN, ">&", \*STDIN_READER or die "can't dup STDIN_READER to STDIN: $!";
 789
 790                 exec(@preargs, $ENV{MAKE_TEST_BINARY}, @args, @optargs)
 791                         or die("Unable to start $ENV{MAKE_TEST_BINARY}: $!");
 792         }
 793         $env_vars->{SMBD_TL_PID} = $pid;
 794         write_pid($env_vars, "smbd", $pid);
 795         print "DONE\n";
 796
 797         close(STDIN_READER);
 798
 799         return $self->wait_for_start($env_vars, $nmbd, $winbindd, $smbd);
 800 }
 801
 802 sub provision($$$$$$)
 803 {
 804         my ($self, $prefix, $server, $password, $extra_options, $no_delete_prefix) = @_;
 805
 806         ##
 807         ## setup the various environment variables we need
 808         ##
 809
 810         my $swiface = Samba::get_interface($server);
 811         my %ret = ();
 812         my $server_ip = "127.0.0.$swiface";
 813         my $domain = "SAMBA-TEST";
 814
 815         my $unix_name = ($ENV{USER} or $ENV{LOGNAME} or `PATH=/usr/ucb:$ENV{PATH} whoami`);
 816         chomp $unix_name;
 817         my $unix_uid = $>;
 818         my $unix_gids_str = $);
 819         my @unix_gids = split(" ", $unix_gids_str);
 820
 821         my $prefix_abs = abs_path($prefix);
 822         my $bindir_abs = abs_path($self->{bindir});
 823
 824         my $dns_host_file = "$ENV{SELFTEST_PREFIX}/dns_host_file";
 825
 826         my @dirs = ();
 827
 828         my $shrdir="$prefix_abs/share";
 829         push(@dirs,$shrdir);
 830
 831         my $libdir="$prefix_abs/lib";
 832         push(@dirs,$libdir);
 833
 834         my $piddir="$prefix_abs/pid";
 835         push(@dirs,$piddir);
 836
 837         my $privatedir="$prefix_abs/private";
 838         push(@dirs,$privatedir);
 839
 840         my $lockdir="$prefix_abs/lockdir";
 841         push(@dirs,$lockdir);
 842
 843         my $eventlogdir="$prefix_abs/lockdir/eventlog";
 844         push(@dirs,$eventlogdir);
 845
 846         my $logdir="$prefix_abs/logs";
 847         push(@dirs,$logdir);
 848
 849         my $driver32dir="$shrdir/W32X86";
 850         push(@dirs,$driver32dir);
 851
 852         my $driver64dir="$shrdir/x64";
 853         push(@dirs,$driver64dir);
 854
 855         my $driver40dir="$shrdir/WIN40";
 856         push(@dirs,$driver40dir);
 857
 858         my $ro_shrdir="$shrdir/root-tmp";
 859         push(@dirs,$ro_shrdir);
 860
 861         my $msdfs_shrdir="$shrdir/msdfsshare";
 862         push(@dirs,$msdfs_shrdir);
 863
 864         my $msdfs_deeppath="$msdfs_shrdir/deeppath";
 865         push(@dirs,$msdfs_deeppath);
 866
 867         # this gets autocreated by winbindd
 868         my $wbsockdir="$prefix_abs/winbindd";
 869         my $wbsockprivdir="$lockdir/winbindd_privileged";
 870
 871         my $nmbdsockdir="$prefix_abs/nmbd";
 872         unlink($nmbdsockdir);
 873
 874         my $fs_specific_conf = $self->get_fs_specific_conf($shrdir);
 875
 876         ##
 877         ## create the test directory layout
 878         ##
 879         die ("prefix_abs = ''") if $prefix_abs eq "";
 880         die ("prefix_abs = '/'") if $prefix_abs eq "/";
 881
 882         mkdir($prefix_abs, 0777);
 883         print "CREATE TEST ENVIRONMENT IN '$prefix'...";
 884         if (not defined($no_delete_prefix) or not $no_delete_prefix) {
 885             system("rm -rf $prefix_abs/*");
 886         }
 887         mkdir($_, 0777) foreach(@dirs);
 888
 889         ##
 890         ## lockdir and piddir must be 0755
 891         ##
 892         chmod 0755, $lockdir;
 893         chmod 0755, $piddir;
 894
 895
 896         ##
 897         ## create ro and msdfs share layout
 898         ##
 899
 900         chmod 0755, $ro_shrdir;
 901         my $unreadable_file = "$ro_shrdir/unreadable_file";
 902         unless (open(UNREADABLE_FILE, ">$unreadable_file")) {
 903                 warn("Unable to open $unreadable_file");
 904                 return undef;
 905         }
 906         close(UNREADABLE_FILE);
 907         chmod 0600, $unreadable_file;
 908
 909         my $msdfs_target = "$ro_shrdir/msdfs-target";
 910         unless (open(MSDFS_TARGET, ">$msdfs_target")) {
 911                 warn("Unable to open $msdfs_target");
 912                 return undef;
 913         }
 914         close(MSDFS_TARGET);
 915         chmod 0666, $msdfs_target;
 916         symlink "msdfs:$server_ip\\ro-tmp", "$msdfs_shrdir/msdfs-src1";
 917         symlink "msdfs:$server_ip\\ro-tmp", "$msdfs_shrdir/deeppath/msdfs-src2";
 918
 919         my $conffile="$libdir/server.conf";
 920
 921         my $nss_wrapper_pl = "$ENV{PERL} $self->{srcdir}/lib/nss_wrapper/nss_wrapper.pl";
 922         my $nss_wrapper_passwd = "$privatedir/passwd";
 923         my $nss_wrapper_group = "$privatedir/group";
 924
 925         my $mod_printer_pl = "$ENV{PERL} $self->{srcdir}/source3/script/tests/printing/modprinter.pl";
 926
 927         my @eventlog_list = ("dns server", "application");
 928
 929         ##
 930         ## calculate uids and gids
 931         ##
 932
 933         my ($max_uid, $max_gid);
 934         my ($uid_nobody, $uid_root, $uid_pdbtest);
 935         my ($gid_nobody, $gid_nogroup, $gid_root, $gid_domusers, $gid_domadmins);
 936
 937         if ($unix_uid < 0xffff - 2) {
 938                 $max_uid = 0xffff;
 939         } else {
 940                 $max_uid = $unix_uid;
 941         }
 942
 943         $uid_root = $max_uid - 1;
 944         $uid_nobody = $max_uid - 2;
 945         $uid_pdbtest = $max_uid - 3;
 946
 947         if ($unix_gids[0] < 0xffff - 3) {
 948                 $max_gid = 0xffff;
 949         } else {
 950                 $max_gid = $unix_gids[0];
 951         }
 952
 953         $gid_nobody = $max_gid - 1;
 954         $gid_nogroup = $max_gid - 2;
 955         $gid_root = $max_gid - 3;
 956         $gid_domusers = $max_gid - 4;
 957         $gid_domadmins = $max_gid - 5;
 958
 959         ##
 960         ## create conffile
 961         ##
 962
 963         unless (open(CONF, ">$conffile")) {
 964                 warn("Unable to open $conffile");
 965                 return undef;
 966         }
 967         print CONF "
 968 [global]
 969         netbios name = $server
 970         interfaces = $server_ip/8
 971         bind interfaces only = yes
 972         panic action = cd $self->{srcdir} && $self->{srcdir}/selftest/gdb_backtrace %d %\$(MAKE_TEST_BINARY)
 973         smbd:suicide mode = yes
 974
 975         workgroup = $domain
 976
 977         private dir = $privatedir
 978         pid directory = $piddir
 979         lock directory = $lockdir
 980         log file = $logdir/log.\%m
 981         log level = 1
 982         debug pid = yes
 983         max log size = 0
 984
 985         state directory = $lockdir
 986         cache directory = $lockdir
 987
 988         passdb backend = tdbsam
 989
 990         time server = yes
 991
 992         add user script =               $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type passwd --action add --name %u --gid $gid_nogroup
 993         add group script =              $nss_wrapper_pl --group_path  $nss_wrapper_group  --type group  --action add --name %g
 994         add machine script =            $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type passwd --action add --name %u --gid $gid_nogroup
 995         add user to group script =      $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type member --action add --member %u --name %g --group_path $nss_wrapper_group
 996         delete user script =            $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type passwd --action delete --name %u
 997         delete group script =           $nss_wrapper_pl --group_path  $nss_wrapper_group  --type group  --action delete --name %g
 998         delete user from group script = $nss_wrapper_pl --passwd_path $nss_wrapper_passwd --type member --action delete --member %u --name %g --group_path $nss_wrapper_group
 999
1000         addprinter command =            $mod_printer_pl -a -s $conffile --
1001         deleteprinter command =         $mod_printer_pl -d -s $conffile --
1002
1003         eventlog list = application \"dns server\"
1004
1005         kernel oplocks = no
1006         kernel change notify = no
1007
1008         syslog = no
1009         printing = bsd
1010         printcap name = /dev/null
1011
1012         winbindd socket directory = $wbsockdir
1013         nmbd:socket dir = $nmbdsockdir
1014         idmap config * : range = 100000-200000
1015         winbind enum users = yes
1016         winbind enum groups = yes
1017
1018 #       min receivefile size = 4000
1019
1020         read only = no
1021         server signing = auto
1022
1023         smbd:sharedelay = 100000
1024         smbd:writetimeupdatedelay = 500000
1025         map hidden = no
1026         map system = no
1027         map readonly = no
1028         store dos attributes = yes
1029         create mask = 755
1030         dos filemode = yes
1031         vfs objects = acl_xattr fake_acls xattr_tdb streams_depot
1032
1033         printing = vlp
1034         print command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb print %p %s
1035         lpq command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb lpq %p
1036         lp rm command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb lprm %p %j
1037         lp pause command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb lppause %p %j
1038         lp resume command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb lpresume %p %j
1039         queue pause command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb queuepause %p
1040         queue resume command = $bindir_abs/vlp tdbfile=$lockdir/vlp.tdb queueresume %p
1041         lpq cache time = 0
1042         print notify backchannel = yes
1043
1044         ncalrpc dir = $prefix_abs/ncalrpc
1045         resolv:host file = $dns_host_file
1046
1047         # The samba3.blackbox.smbclient_s3 test uses this to test that
1048         # sending messages works, and that the %m sub works.
1049         message command = mv %s $shrdir/message.%m
1050
1051         # Begin extra options
1052         $extra_options
1053         # End extra options
1054
1055         #Include user defined custom parameters if set
1056 ";
1057
1058         if (defined($ENV{INCLUDE_CUSTOM_CONF})) {
1059                 print CONF "\t$ENV{INCLUDE_CUSTOM_CONF}\n";
1060         }
1061
1062         print CONF "
1063 [tmp]
1064         path = $shrdir
1065         comment = smb username is [%U]
1066 [tmpsort]
1067         path = $shrdir
1068         comment = Load dirsort module
1069         vfs objects = dirsort acl_xattr fake_acls xattr_tdb streams_depot
1070 [tmpenc]
1071         path = $shrdir
1072         comment = encrypt smb username is [%U]
1073         smb encrypt = required
1074         vfs objects = dirsort
1075 [tmpguest]
1076         path = $shrdir
1077         guest ok = yes
1078 [guestonly]
1079         path = $shrdir
1080         guest only = yes
1081         guest ok = yes
1082 [forceuser]
1083         path = $shrdir
1084         force user = $unix_name
1085         guest ok = yes
1086 [forcegroup]
1087         path = $shrdir
1088         force group = nogroup
1089         guest ok = yes
1090 [ro-tmp]
1091         path = $ro_shrdir
1092         guest ok = yes
1093 [write-list-tmp]
1094         path = $shrdir
1095         read only = yes
1096         write list = $unix_name
1097 [valid-users-tmp]
1098         path = $shrdir
1099         valid users = $unix_name
1100 [msdfs-share]
1101         path = $msdfs_shrdir
1102         msdfs root = yes
1103         guest ok = yes
1104 [hideunread]
1105         copy = tmp
1106         hide unreadable = yes
1107 [tmpcase]
1108         copy = tmp
1109         case sensitive = yes
1110 [hideunwrite]
1111         copy = tmp
1112         hide unwriteable files = yes
1113 [durable]
1114         copy = tmp
1115         kernel share modes = no
1116         kernel oplocks = no
1117         posix locking = no
1118 [fs_specific]
1119         copy = tmp
1120         $fs_specific_conf
1121 [print1]
1122         copy = tmp
1123         printable = yes
1124
1125 [print2]
1126         copy = print1
1127 [print3]
1128         copy = print1
1129         default devmode = no
1130 [lp]
1131         copy = print1
1132
1133 [nfs4acl_simple]
1134         path = $shrdir
1135         comment = smb username is [%U]
1136         nfs4:mode = simple
1137         vfs objects = nfs4acl_xattr xattr_tdb
1138
1139 [nfs4acl_special]
1140         path = $shrdir
1141         comment = smb username is [%U]
1142         nfs4:mode = special
1143         vfs objects = nfs4acl_xattr xattr_tdb
1144
1145 [xcopy_share]
1146         path = $shrdir
1147         comment = smb username is [%U]
1148         create mask = 777
1149         force create mode = 777
1150 [posix_share]
1151         path = $shrdir
1152         comment = smb username is [%U]
1153         create mask = 0777
1154         force create mode = 0
1155         directory mask = 0777
1156         force directory mode = 0
1157         vfs objects = xattr_tdb
1158 [aio]
1159         copy = tmp
1160         aio read size = 1
1161         aio write size = 1
1162
1163 [print\$]
1164         copy = tmp
1165         ";
1166         close(CONF);
1167
1168         ##
1169         ## create a test account
1170         ##
1171
1172         unless (open(PASSWD, ">$nss_wrapper_passwd")) {
1173            warn("Unable to open $nss_wrapper_passwd");
1174            return undef;
1175         }
1176         print PASSWD "nobody:x:$uid_nobody:$gid_nobody:nobody gecos:$prefix_abs:/bin/false
1177 $unix_name:x:$unix_uid:$unix_gids[0]:$unix_name gecos:$prefix_abs:/bin/false
1178 pdbtest:x:$uid_pdbtest:$gid_nogroup:pdbtest gecos:$prefix_abs:/bin/false
1179 ";
1180         if ($unix_uid != 0) {
1181                 print PASSWD "root:x:$uid_root:$gid_root:root gecos:$prefix_abs:/bin/false
1182 ";
1183         }
1184         close(PASSWD);
1185
1186         unless (open(GROUP, ">$nss_wrapper_group")) {
1187              warn("Unable to open $nss_wrapper_group");
1188              return undef;
1189         }
1190         print GROUP "nobody:x:$gid_nobody:
1191 nogroup:x:$gid_nogroup:nobody
1192 $unix_name-group:x:$unix_gids[0]:
1193 domusers:X:$gid_domusers:
1194 domadmins:X:$gid_domadmins:
1195 ";
1196         if ($unix_gids[0] != 0) {
1197                 print GROUP "root:x:$gid_root:
1198 ";
1199         }
1200
1201         close(GROUP);
1202
1203         foreach my $evlog (@eventlog_list) {
1204                 my $evlogtdb = "$eventlogdir/$evlog.tdb";
1205                 open(EVENTLOG, ">$evlogtdb") or die("Unable to open $evlogtdb");
1206                 close(EVENTLOG);
1207         }
1208
1209         $ENV{NSS_WRAPPER_PASSWD} = $nss_wrapper_passwd;
1210         $ENV{NSS_WRAPPER_GROUP} = $nss_wrapper_group;
1211
1212         my $cmd = "UID_WRAPPER_ROOT=1 " . Samba::bindir_path($self, "smbpasswd")." -c $conffile -L -s -a $unix_name > /dev/null";
1213         unless (open(PWD, "|$cmd")) {
1214              warn("Unable to set password for test account\n$cmd");
1215              return undef;
1216         }
1217         print PWD "$password\n$password\n";
1218         unless (close(PWD)) {
1219              warn("Unable to set password for test account\n$cmd");
1220              return undef;
1221         }
1222         print "DONE\n";
1223
1224         open(DNS_UPDATE_LIST, ">$prefix/dns_update_list") or die("Unable to open $$prefix/dns_update_list");
1225         print DNS_UPDATE_LIST "A $server. $server_ip";
1226         close(DNS_UPDATE_LIST);
1227
1228         if (system("$ENV{SRCDIR_ABS}/source4/scripting/bin/samba_dnsupdate --all-interfaces --use-file=$dns_host_file -s $conffile --update-list=$prefix/dns_update_list --no-substiutions --no-credentials") != 0) {
1229                 die "Unable to update hostname into $dns_host_file";
1230         }
1231
1232         $ret{SERVER_IP} = $server_ip;
1233         $ret{NMBD_TEST_LOG} = "$prefix/nmbd_test.log";
1234         $ret{NMBD_TEST_LOG_POS} = 0;
1235         $ret{WINBINDD_TEST_LOG} = "$prefix/winbindd_test.log";
1236         $ret{WINBINDD_TEST_LOG_POS} = 0;
1237         $ret{SMBD_TEST_LOG} = "$prefix/smbd_test.log";
1238         $ret{SMBD_TEST_LOG_POS} = 0;
1239         $ret{SERVERCONFFILE} = $conffile;
1240         $ret{CONFIGURATION} ="-s $conffile";
1241         $ret{SERVER} = $server;
1242         $ret{USERNAME} = $unix_name;
1243         $ret{USERID} = $unix_uid;
1244         $ret{DOMAIN} = $domain;
1245         $ret{NETBIOSNAME} = $server;
1246         $ret{PASSWORD} = $password;
1247         $ret{PIDDIR} = $piddir;
1248         $ret{WINBINDD_SOCKET_DIR} = $wbsockdir;
1249         $ret{WINBINDD_PRIV_PIPE_DIR} = $wbsockprivdir;
1250         $ret{NMBD_SOCKET_DIR} = $nmbdsockdir;
1251         $ret{SOCKET_WRAPPER_DEFAULT_IFACE} = $swiface;
1252         $ret{NSS_WRAPPER_PASSWD} = $nss_wrapper_passwd;
1253         $ret{NSS_WRAPPER_GROUP} = $nss_wrapper_group;
1254         $ret{NSS_WRAPPER_MODULE_SO_PATH} = Samba::nss_wrapper_winbind_so_path($self);
1255         $ret{NSS_WRAPPER_MODULE_FN_PREFIX} = "winbind";
1256         $ret{LOCAL_PATH} = "$shrdir";
1257         $ret{LOGDIR} = $logdir;
1258
1259         return \%ret;
1260 }
1261
1262 sub wait_for_start($$$$$)
1263 {
1264         my ($self, $envvars, $nmbd, $winbindd, $smbd) = @_;
1265         my $ret;
1266
1267         if ($nmbd eq "yes") {
1268             # give time for nbt server to register its names
1269             print "delaying for nbt name registration\n";
1270             sleep(10);
1271             # This will return quickly when things are up, but be slow if we need to wait for (eg) SSL init
1272             my $nmblookup = Samba::bindir_path($self, "nmblookup3");
1273             system("$nmblookup $envvars->{CONFIGURATION} -U $envvars->{SERVER_IP} __SAMBA__");
1274             system("$nmblookup $envvars->{CONFIGURATION} __SAMBA__");
1275             system("$nmblookup $envvars->{CONFIGURATION} -U 127.255.255.255 __SAMBA__");
1276             system("$nmblookup $envvars->{CONFIGURATION} -U $envvars->{SERVER_IP} $envvars->{SERVER}");
1277             system("$nmblookup $envvars->{CONFIGURATION} $envvars->{SERVER}");
1278         }
1279
1280         if ($winbindd eq "yes") {
1281             print "checking for winbindd\n";
1282             my $count = 0;
1283             do {
1284                 $ret = system("WINBINDD_SOCKET_DIR=" . $envvars->{WINBINDD_SOCKET_DIR} . " " . Samba::bindir_path($self, "wbinfo") . " -p");
1285                 if ($ret != 0) {
1286                     sleep(2);
1287                 }
1288                 $count++;
1289             } while ($ret != 0 && $count < 10);
1290             if ($count == 10) {
1291                 print "WINBINDD not reachable after 20 seconds\n";
1292                 teardown_env($self, $envvars);
1293                 return 0;
1294             }
1295         }
1296
1297         if ($smbd eq "yes") {
1298             # make sure smbd is also up set
1299             print "wait for smbd\n";
1300
1301             my $count = 0;
1302             do {
1303                 $ret = system(Samba::bindir_path($self, "smbclient3") ." $envvars->{CONFIGURATION} -L $envvars->{SERVER} -U% -p 139");
1304                 if ($ret != 0) {
1305                     sleep(2);
1306                 }
1307                 $count++
1308             } while ($ret != 0 && $count < 10);
1309             if ($count == 10) {
1310                 print "SMBD failed to start up in a reasonable time (20sec)\n";
1311                 teardown_env($self, $envvars);
1312                 return 0;
1313             }
1314         }
1315
1316         # Ensure we have domain users mapped.
1317         $ret = system(Samba::bindir_path($self, "net") ." $envvars->{CONFIGURATION} groupmap add rid=513 unixgroup=domusers type=domain");
1318         if ($ret != 0) {
1319             return 1;
1320         }
1321         $ret = system(Samba::bindir_path($self, "net") ." $envvars->{CONFIGURATION} groupmap add rid=512 unixgroup=domadmins type=domain");
1322         if ($ret != 0) {
1323             return 1;
1324         }
1325
1326         if ($winbindd eq "yes") {
1327             # note: creating builtin groups requires winbindd for the
1328             # unix id allocator
1329             $ret = system("WINBINDD_SOCKET_DIR=" . $envvars->{WINBINDD_SOCKET_DIR} . " " . Samba::bindir_path($self, "net") ." $envvars->{CONFIGURATION} sam createbuiltingroup Users");
1330             if ($ret != 0) {
1331                 print "Failed to create BUILTIN\\Users group\n";
1332                 return 0;
1333             }
1334             my $count = 0;
1335             do {
1336                 system(Samba::bindir_path($self, "net") . " $envvars->{CONFIGURATION} cache flush");
1337                 $ret = system("WINBINDD_SOCKET_DIR=" . $envvars->{WINBINDD_SOCKET_DIR} . " " . Samba::bindir_path($self, "wbinfo") . " --sid-to-gid=S-1-5-32-545");
1338                 if ($ret != 0) {
1339                     sleep(2);
1340                 }
1341                 $count++;
1342             } while ($ret != 0 && $count < 10);
1343             if ($count == 10) {
1344                 print "WINBINDD not reachable after 20 seconds\n";
1345                 teardown_env($self, $envvars);
1346                 return 0;
1347             }
1348         }
1349
1350         print $self->getlog_env($envvars);
1351
1352         return 1;
1353 }
1354
1355 1;