| blob | acbe3fec2348ca43199a80a61dbdaf59f8679a89 |
1 *various.txt* For Vim version 7.1. Last change: 2008 Jan 23
4 VIM REFERENCE MANUAL by Bram Moolenaar
7 Various commands *various*
9 1. Various commands |various-cmds|
10 2. Online help |online-help|
11 3. Using Vim like less or more |less|
13 ==============================================================================
14 1. Various commands *various-cmds*
16 *CTRL-L*
17 CTRL-L Clear and redraw the screen. The redraw may happen
18 later, after processing typeahead.
20 *:redr* *:redraw*
21 :redr[aw][!] Redraw the screen right now. When ! is included it is
22 cleared first.
23 Useful to update the screen halfway executing a script
24 or function. Also when halfway a mapping and
25 'lazyredraw' is set.
27 *:redraws* *:redrawstatus*
28 :redraws[tatus][!] Redraw the status line of the current window. When !
29 is included all status lines are redrawn.
30 Useful to update the status line(s) when 'statusline'
31 includes an item that doesn't cause automatic
32 updating.
34 *N<Del>*
35 <Del> When entering a number: Remove the last digit.
36 Note: if you like to use <BS> for this, add this
37 mapping to your .vimrc: >
38 :map CTRL-V <BS> CTRL-V <Del>
39 < See |:fixdel| if your <Del> key does not do what you
40 want.
42 :as[cii] or *ga* *:as* *:ascii*
43 ga Print the ascii value of the character under the
44 cursor in decimal, hexadecimal and octal. For
45 example, when the cursor is on a 'R':
46 <R> 82, Hex 52, Octal 122 ~
47 When the character is a non-standard ASCII character,
48 but printable according to the 'isprint' option, the
49 non-printable version is also given. When the
50 character is larger than 127, the <M-x> form is also
51 printed. For example:
52 <~A> <M-^A> 129, Hex 81, Octal 201 ~
53 <p> <|~> <M-~> 254, Hex fe, Octal 376 ~
54 (where <p> is a special character)
55 The <Nul> character in a file is stored internally as
56 <NL>, but it will be shown as:
57 <^@> 0, Hex 00, Octal 000 ~
58 If the character has composing characters these are
59 also shown. The value of 'maxcombine' doesn't matter.
60 Mnemonic: Get Ascii value. {not in Vi}
62 *g8*
63 g8 Print the hex values of the bytes used in the
64 character under the cursor, assuming it is in |UTF-8|
65 encoding. This also shows composing characters. The
66 value of 'maxcombine' doesn't matter.
67 Example of a character with two composing characters:
68 e0 b8 81 + e0 b8 b9 + e0 b9 89 ~
69 {not in Vi} {only when compiled with the |+multi_byte|
70 feature}
72 *8g8*
73 8g8 Find an illegal UTF-8 byte sequence at or after the
74 cursor. This works in two situations:
75 1. when 'encoding' is any 8-bit encoding
76 2. when 'encoding' is "utf-8" and 'fileencoding' is
77 any 8-bit encoding
78 Thus it can be used when editing a file that was
79 supposed to be UTF-8 but was read as if it is an 8-bit
80 encoding because it contains illegal bytes.
81 Does not wrap around the end of the file.
82 Note that when the cursor is on an illegal byte or the
83 cursor is halfway a multi-byte character the command
84 won't move the cursor.
85 {not in Vi} {only when compiled with the |+multi_byte|
86 feature}
88 *:p* *:pr* *:print* *E749*
89 :[range]p[rint] [flags]
90 Print [range] lines (default current line).
91 Note: If you are looking for a way to print your text
92 on paper see |:hardcopy|. In the GUI you can use the
93 File.Print menu entry.
94 See |ex-flags| for [flags].
96 :[range]p[rint] {count} [flags]
97 Print {count} lines, starting with [range] (default
98 current line |cmdline-ranges|).
99 See |ex-flags| for [flags].
101 *:P* *:Print*
102 :[range]P[rint] [count] [flags]
103 Just as ":print". Was apparently added to Vi for
104 people that keep the shift key pressed too long...
105 See |ex-flags| for [flags].
107 *:l* *:list*
108 :[range]l[ist] [count] [flags]
109 Same as :print, but display unprintable characters
110 with '^' and put $ after the line.
111 See |ex-flags| for [flags].
113 *:nu* *:number*
114 :[range]nu[mber] [count] [flags]
115 Same as :print, but precede each line with its line
116 number. (See also 'highlight' and 'numberwidth'
117 option).
118 See |ex-flags| for [flags].
120 *:#*
121 :[range]# [count] [flags]
122 synonym for :number.
124 *:#!*
125 :#!{anything} Ignored, so that you can start a Vim script with: >
126 #!vim -S
127 echo "this is a Vim script"
128 quit
129 <
130 *:z* *E144*
131 :{range}z[+-^.=]{count} Display several lines of text surrounding the line
132 specified with {range}, or around the current line
133 if there is no {range}. If there is a {count}, that's
134 how many lines you'll see; if there is only one window
135 then the 'window' option is used, otherwise the
136 current window size is used.
138 :z can be used either alone or followed by any of
139 several punctuation marks. These have the following
140 effect:
142 mark first line last line new location ~
143 ---- ---------- --------- ------------
144 + current line 1 scr forward 1 scr forward
145 - 1 scr back current line current line
146 ^ 2 scr back 1 scr back 1 scr back
147 . 1/2 scr back 1/2 scr fwd 1/2 scr fwd
148 = 1/2 scr back 1/2 scr fwd current line
150 Specifying no mark at all is the same as "+".
151 If the mark is "=", a line of dashes is printed
152 around the current line.
154 :{range}z#[+-^.=]{count} *:z#*
155 Like ":z", but number the lines.
156 {not in all versions of Vi, not with these arguments}
158 *:=*
159 := [flags] Print the last line number.
160 See |ex-flags| for [flags].
162 :{range}= [flags] Prints the last line number in {range}. For example,
163 this prints the current line number: >
164 :.=
165 < See |ex-flags| for [flags].
167 :norm[al][!] {commands} *:norm* *:normal*
168 Execute Normal mode commands {commands}. This makes
169 it possible to execute Normal mode commands typed on
170 the command-line. {commands} is executed like it is
171 typed. For undo all commands are undone together.
172 Execution stops when an error is encountered.
173 If the [!] is given, mappings will not be used.
174 {commands} should be a complete command. If
175 {commands} does not finish a command, the last one
176 will be aborted as if <Esc> or <C-C> was typed.
177 The display isn't updated while ":normal" is busy.
178 This implies that an insert command must be completed
179 (to start Insert mode, see |:startinsert|). A ":"
180 command must be completed as well. And you can't use
181 "Q" or "gQ" to start Ex mode.
182 {commands} cannot start with a space. Put a 1 (one)
183 before it, 1 space is one space.
184 The 'insertmode' option is ignored for {commands}.
185 This command cannot be followed by another command,
186 since any '|' is considered part of the command.
187 This command can be used recursively, but the depth is
188 limited by 'maxmapdepth'.
189 When this command is called from a non-remappable
190 mapping |:noremap|, the argument can be mapped anyway.
191 An alternative is to use |:execute|, which uses an
192 expression as argument. This allows the use of
193 printable characters. Example: >
194 :exe "normal \<c-w>\<c-w>"
195 < {not in Vi, of course}
196 {not available when the |+ex_extra| feature was
197 disabled at compile time}
199 :{range}norm[al][!] {commands} *:normal-range*
200 Execute Normal mode commands {commands} for each line
201 in the {range}. Before executing the {commands}, the
202 cursor is positioned in the first column of the range,
203 for each line. Otherwise it's the same as the
204 ":normal" command without a range.
205 {not in Vi}
206 Not available when |+ex_extra| feature was disabled at
207 compile time.
209 *:sh* *:shell* *E371*
210 :sh[ell] This command starts a shell. When the shell exits
211 (after the "exit" command) you return to Vim. The
212 name for the shell command comes from 'shell' option.
213 *E360*
214 Note: This doesn't work when Vim on the Amiga was
215 started in QuickFix mode from a compiler, because the
216 compiler will have set stdin to a non-interactive
217 mode.
219 *:!cmd* *:!* *E34*
220 :!{cmd} Execute {cmd} with the shell. See also the 'shell'
221 and 'shelltype' option.
222 Any '!' in {cmd} is replaced with the previous
223 external command (see also 'cpoptions'). But not when
224 there is a backslash before the '!', then that
225 backslash is removed. Example: ":!ls" followed by
226 ":!echo ! \! \\!" executes "echo ls ! \!".
227 After the command has been executed, the timestamp of
228 the current file is checked |timestamp|.
229 A '|' in {cmd} is passed to the shell, you cannot use
230 it to append a Vim command. See |:bar|.
231 A newline character ends {cmd}, what follows is
232 interpreted as a following ":" command. However, if
233 there is a backslash before the newline it is removed
234 and {cmd} continues. It doesn't matter how many
235 backslashes are before the newline, only one is
236 removed.
237 On Unix the command normally runs in a non-interactive
238 shell. If you want an interactive shell to be used
239 (to use aliases) set 'shellcmdflag' to "-ic".
240 For Win32 also see |:!start|.
241 Vim redraws the screen after the command is finished,
242 because it may have printed any text. This requires a
243 hit-enter prompt, so that you can read any messages.
244 To avoid this use: >
245 :silent !{cmd}
246 < The screen is not redrawn then, thus you have to use
247 CTRL-L or ":redraw!" if the command did display
248 something.
249 Also see |shell-window|.
251 *:!!*
252 :!! Repeat last ":!{cmd}".
254 *:ve* *:version*
255 :ve[rsion] Print the version number of the editor. If the
256 compiler used understands "__DATE__" the compilation
257 date is mentioned. Otherwise a fixed release-date is
258 shown.
259 The following lines contain information about which
260 features were enabled when Vim was compiled. When
261 there is a preceding '+', the feature is included,
262 when there is a '-' it is excluded. To change this,
263 you have to edit feature.h and recompile Vim.
264 To check for this in an expression, see |has()|.
265 Here is an overview of the features.
266 The first column shows the smallest version in which
267 they are included:
268 T tiny
269 S small
270 N normal
271 B big
272 H huge
273 m manually enabled or depends on other features
274 (none) system dependent
275 Thus if a feature is marked with "N", it is included
276 in the normal, big and huge versions of Vim.
278 *+feature-list*
279 *+ARP* Amiga only: ARP support included
280 B *+arabic* |Arabic| language support
281 N *+autocmd* |:autocmd|, automatic commands
282 m *+balloon_eval* |balloon-eval| support. Included when compiling with
283 supported GUI (Motif, GTK, GUI) and either
284 Netbeans/Sun Workshop integration or |+eval| feature.
285 N *+browse* |:browse| command
286 N *+builtin_terms* some terminals builtin |builtin-terms|
287 B *++builtin_terms* maximal terminals builtin |builtin-terms|
288 N *+byte_offset* support for 'o' flag in 'statusline' option, "go"
289 and ":goto" commands.
290 N *+cindent* |'cindent'|, C indenting
291 N *+clientserver* Unix and Win32: Remote invocation |clientserver|
292 *+clipboard* |clipboard| support
293 N *+cmdline_compl* command line completion |cmdline-completion|
294 N *+cmdline_hist* command line history |cmdline-history|
295 N *+cmdline_info* |'showcmd'| and |'ruler'|
296 N *+comments* |'comments'| support
297 N *+cryptv* encryption support |encryption|
298 B *+cscope* |cscope| support
299 m *+cursorshape* |termcap-cursor-shape| support
300 m *+debug* Compiled for debugging.
301 N *+dialog_gui* Support for |:confirm| with GUI dialog.
302 N *+dialog_con* Support for |:confirm| with console dialog.
303 N *+dialog_con_gui* Support for |:confirm| with GUI and console dialog.
304 N *+diff* |vimdiff| and 'diff'
305 N *+digraphs* |digraphs| *E196*
306 *+dnd* Support for DnD into the "~ register |quote_~|.
307 B *+emacs_tags* |emacs-tags| files
308 N *+eval* expression evaluation |eval.txt|
309 N *+ex_extra* Vim's extra Ex commands: |:center|, |:left|,
310 |:normal|, |:retab| and |:right|
311 N *+extra_search* |'hlsearch'| and |'incsearch'| options.
312 B *+farsi* |farsi| language
313 N *+file_in_path* |gf|, |CTRL-W_f| and |<cfile>|
314 N *+find_in_path* include file searches: |[I|, |:isearch|,
315 |CTRL-W_CTRL-I|, |:checkpath|, etc.
316 N *+folding* |folding|
317 *+footer* |gui-footer|
318 *+fork* Unix only: |fork| shell commands
319 N *+gettext* message translations |multi-lang|
320 *+GUI_Athena* Unix only: Athena |GUI|
321 *+GUI_neXtaw* Unix only: neXtaw |GUI|
322 *+GUI_GTK* Unix only: GTK+ |GUI|
323 *+GUI_Motif* Unix only: Motif |GUI|
324 *+GUI_Photon* QNX only: Photon |GUI|
325 m *+hangul_input* Hangul input support |hangul|
326 *+iconv* Compiled with the |iconv()| function
327 *+iconv/dyn* Likewise |iconv-dynamic| |/dyn|
328 N *+insert_expand* |insert_expand| Insert mode completion
329 N *+jumplist* |jumplist|
330 B *+keymap* |'keymap'|
331 B *+langmap* |'langmap'|
332 N *+libcall* |libcall()|
333 N *+linebreak* |'linebreak'|, |'breakat'| and |'showbreak'|
334 N *+lispindent* |'lisp'|
335 N *+listcmds* Vim commands for the list of buffers |buffer-hidden|
336 and argument list |:argdelete|
337 N *+localmap* Support for mappings local to a buffer |:map-local|
338 N *+menu* |:menu|
339 N *+mksession* |:mksession|
340 N *+modify_fname* |filename-modifiers|
341 N *+mouse* Mouse handling |mouse-using|
342 N *+mouseshape* |'mouseshape'|
343 B *+mouse_dec* Unix only: Dec terminal mouse handling |dec-mouse|
344 N *+mouse_gpm* Unix only: Linux console mouse handling |gpm-mouse|
345 B *+mouse_netterm* Unix only: netterm mouse handling |netterm-mouse|
346 N *+mouse_pterm* QNX only: pterm mouse handling |qnx-terminal|
347 N *+mouse_xterm* Unix only: xterm mouse handling |xterm-mouse|
348 B *+multi_byte* Korean and other languages |multibyte|
349 *+multi_byte_ime* Win32 input method for multibyte chars |multibyte-ime|
350 N *+multi_lang* non-English language support |multi-lang|
351 m *+mzscheme* Mzscheme interface |mzscheme|
352 m *+mzscheme/dyn* Mzscheme interface |mzscheme-dynamic| |/dyn|
353 m *+netbeans_intg* |netbeans|
354 m *+ole* Win32 GUI only: |ole-interface|
355 *+osfiletype* Support for the 'osfiletype' option and filetype
356 checking in automatic commands. |autocmd-osfiletypes|
357 N *+path_extra* Up/downwards search in 'path' and 'tags'
358 m *+perl* Perl interface |perl|
359 m *+perl/dyn* Perl interface |perl-dynamic| |/dyn|
360 *+postscript* |:hardcopy| writes a PostScript file
361 N *+printer* |:hardcopy| command
362 H *+profile* |:profile| command
363 m *+python* Python interface |python|
364 m *+python/dyn* Python interface |python-dynamic| |/dyn|
365 N *+quickfix* |:make| and |quickfix| commands
366 N *+reltime* |reltime()| function, 'hlsearch'/'incsearch' timeout,
367 'redrawtime' option
368 B *+rightleft* Right to left typing |'rightleft'|
369 m *+ruby* Ruby interface |ruby|
370 m *+ruby/dyn* Ruby interface |ruby-dynamic| |/dyn|
371 N *+scrollbind* |'scrollbind'|
372 B *+signs* |:sign|
373 N *+smartindent* |'smartindent'|
374 m *+sniff* SniFF interface |sniff|
375 N *+statusline* Options 'statusline', 'rulerformat' and special
376 formats of 'titlestring' and 'iconstring'
377 m *+sun_workshop* |workshop|
378 N *+syntax* Syntax highlighting |syntax|
379 *+system()* Unix only: opposite of |+fork|
380 N *+tag_binary* binary searching in tags file |tag-binary-search|
381 N *+tag_old_static* old method for static tags |tag-old-static|
382 m *+tag_any_white* any white space allowed in tags file |tag-any-white|
383 m *+tcl* Tcl interface |tcl|
384 m *+tcl/dyn* Tcl interface |tcl-dynamic| |/dyn|
385 *+terminfo* uses |terminfo| instead of termcap
386 N *+termresponse* support for |t_RV| and |v:termresponse|
387 N *+textobjects* |text-objects| selection
388 *+tgetent* non-Unix only: able to use external termcap
389 N *+title* Setting the window 'title' and 'icon'
390 N *+toolbar* |gui-toolbar|
391 N *+user_commands* User-defined commands. |user-commands|
392 N *+viminfo* |'viminfo'|
393 N *+vertsplit* Vertically split windows |:vsplit|
394 N *+virtualedit* |'virtualedit'|
395 S *+visual* Visual mode |Visual-mode|
396 N *+visualextra* extra Visual mode commands |blockwise-operators|
397 N *+vreplace* |gR| and |gr|
398 N *+wildignore* |'wildignore'|
399 N *+wildmenu* |'wildmenu'|
400 S *+windows* more than one window
401 m *+writebackup* |'writebackup'| is default on
402 m *+xim* X input method |xim|
403 *+xfontset* X fontset support |xfontset|
404 *+xsmp* XSMP (X session management) support
405 *+xsmp_interact* interactive XSMP (X session management) support
406 N *+xterm_clipboard* Unix only: xterm clipboard handling
407 m *+xterm_save* save and restore xterm screen |xterm-screens|
408 N *+X11* Unix only: can restore window title |X11|
410 */dyn* *E370* *E448*
411 To some of the features "/dyn" is added when the
412 feature is only available when the related library can
413 be dynamically loaded.
415 :ve[rsion] {nr} Is now ignored. This was previously used to check the
416 version number of a .vimrc file. It was removed,
417 because you can now use the ":if" command for
418 version-dependent behavior. {not in Vi}
420 *:redi* *:redir*
421 :redi[r][!] > {file} Redirect messages to file {file}. The messages which
422 are the output of commands are written to that file,
423 until redirection ends. The messages are also still
424 shown on the screen. When [!] is included, an
425 existing file is overwritten. When [!] is omitted,
426 and {file} exists, this command fails.
427 Only one ":redir" can be active at a time. Calls to
428 ":redir" will close any active redirection before
429 starting redirection to the new target.
430 To stop the messages and commands from being echoed to
431 the screen, put the commands in a function and call it
432 with ":silent call Function()".
433 An alternative is to use the 'verbosefile' option,
434 this can be used in combination with ":redir".
435 {not in Vi}
437 :redi[r] >> {file} Redirect messages to file {file}. Append if {file}
438 already exists. {not in Vi}
440 :redi[r] @{a-zA-Z}
441 :redi[r] @{a-zA-Z}> Redirect messages to register {a-z}. Append to the
442 contents of the register if its name is given
443 uppercase {A-Z}. The ">" after the register name is
444 optional. {not in Vi}
445 :redi[r] @{a-z}>> Append messages to register {a-z}. {not in Vi}
447 :redi[r] @*>
448 :redi[r] @+> Redirect messages to the selection or clipboard. For
449 backward compatibility, the ">" after the register
450 name can be omitted. See |quotestar| and |quoteplus|.
451 {not in Vi}
452 :redi[r] @*>>
453 :redi[r] @+>> Append messages to the selection or clipboard.
454 {not in Vi}
456 :redi[r] @"> Redirect messages to the unnamed register. For
457 backward compatibility, the ">" after the register
458 name can be omitted. {not in Vi}
459 :redi[r] @">> Append messages to the unnamed register. {not in Vi}
461 :redi[r] => {var} Redirect messages to a variable. If the variable
462 doesn't exist, then it is created. If the variable
463 exists, then it is initialized to an empty string.
464 The variable will remain empty until redirection ends.
465 Only string variables can be used. After the
466 redirection starts, if the variable is removed or
467 locked or the variable type is changed, then further
468 command output messages will cause errors. {not in Vi}
470 :redi[r] =>> {var} Append messages to an existing variable. Only string
471 variables can be used. {not in Vi}
473 :redi[r] END End redirecting messages. {not in Vi}
475 *:sil* *:silent*
476 :sil[ent][!] {command} Execute {command} silently. Normal messages will not
477 be given or added to the message history.
478 When [!] is added, error messages will also be
479 skipped, and commands and mappings will not be aborted
480 when an error is detected. |v:errmsg| is still set.
481 When [!] is not used, an error message will cause
482 further messages to be displayed normally.
483 Redirection, started with |:redir|, will continue as
484 usual, although there might be small differences.
485 This will allow redirecting the output of a command
486 without seeing it on the screen. Example: >
487 :redir >/tmp/foobar
488 :silent g/Aap/p
489 :redir END
490 < To execute a Normal mode command silently, use the
491 |:normal| command. For example, to search for a
492 string without messages: >
493 :silent exe "normal /path\<CR>"
494 < ":silent!" is useful to execute a command that may
495 fail, but the failure is to be ignored. Example: >
496 :let v:errmsg = ""
497 :silent! /^begin
498 :if v:errmsg != ""
499 : ... pattern was not found
500 < ":silent" will also avoid the hit-enter prompt. When
501 using this for an external command, this may cause the
502 screen to be messed up. Use |CTRL-L| to clean it up
503 then.
504 ":silent menu ..." defines a menu that will not echo a
505 Command-line command. The command will still produce
506 messages though. Use ":silent" in the command itself
507 to avoid that: ":silent menu .... :silent command".
509 *:verb* *:verbose*
510 :[count]verb[ose] {command}
511 Execute {command} with 'verbose' set to [count]. If
512 [count] is omitted one is used. ":0verbose" can be
513 used to set 'verbose' to zero.
514 The additional use of ":silent" makes messages
515 generated but not displayed.
516 The combination of ":silent" and ":verbose" can be
517 used to generate messages and check them with
518 |v:statusmsg| and friends. For example: >
519 :let v:statusmsg = ""
520 :silent verbose runtime foobar.vim
521 :if v:statusmsg != ""
522 : " foobar.vim could not be found
523 :endif
524 < When concatenating another command, the ":verbose"
525 only applies to the first one: >
526 :4verbose set verbose | set verbose
527 < verbose=4 ~
528 verbose=0 ~
529 For logging verbose messages in a file use the
530 'verbosefile' option.
532 *:verbose-cmd*
533 When 'verbose' is non-zero, listing the value of a Vim option or a key map or
534 an abbreviation or a user-defined function or a command or a highlight group
535 or an autocommand will also display where it was last defined. If it was
536 defined manually then there will be no "Last set" message. When it was
537 defined while executing a function, user command or autocommand, the script in
538 which it was defined is reported.
539 {not available when compiled without the +eval feature}
541 *K*
542 K Run a program to lookup the keyword under the
543 cursor. The name of the program is given with the
544 'keywordprg' (kp) option (default is "man"). The
545 keyword is formed of letters, numbers and the
546 characters in 'iskeyword'. The keyword under or
547 right of the cursor is used. The same can be done
548 with the command >
549 :!{program} {keyword}
550 < There is an example of a program to use in the tools
551 directory of Vim. It is called 'ref' and does a
552 simple spelling check.
553 Special cases:
554 - If 'keywordprg' is empty, the ":help" command is
555 used. It's a good idea to include more characters
556 in 'iskeyword' then, to be able to find more help.
557 - When 'keywordprg' is equal to "man", a count before
558 "K" is inserted after the "man" command and before
559 the keyword. For example, using "2K" while the
560 cursor is on "mkdir", results in: >
561 !man 2 mkdir
562 < - When 'keywordprg' is equal to "man -s", a count
563 before "K" is inserted after the "-s". If there is
564 no count, the "-s" is removed.
565 {not in Vi}
567 *v_K*
568 {Visual}K Like "K", but use the visually highlighted text for
569 the keyword. Only works when the highlighted text is
570 not more than one line. {not in Vi}
572 [N]gs *gs* *:sl* *:sleep*
573 :[N]sl[eep] [N] [m] Do nothing for [N] seconds. When [m] is included,
574 sleep for [N] milliseconds. The count for "gs" always
575 uses seconds. The default is one second. >
576 :sleep "sleep for one second
577 :5sleep "sleep for five seconds
578 :sleep 100m "sleep for a hundred milliseconds
579 10gs "sleep for ten seconds
580 < Can be interrupted with CTRL-C (CTRL-Break on MS-DOS).
581 "gs" stands for "goto sleep".
582 While sleeping the cursor is positioned in the text,
583 if at a visible position. {not in Vi}
585 *g_CTRL-A*
586 g CTRL-A Only when Vim was compiled with MEM_PROFILING defined
587 (which is very rare): print memory usage statistics.
588 Only useful for debugging Vim.
590 ==============================================================================
591 2. Online help *online-help*
593 *help* *<Help>* *:h* *:help* *<F1>* *i_<F1>* *i_<Help>*
594 <Help> or
595 :h[elp] Open a window and display the help file in read-only
596 mode. If there is a help window open already, use
597 that one. Otherwise, if the current window uses the
598 full width of the screen or is at least 80 characters
599 wide, the help window will appear just above the
600 current window. Otherwise the new window is put at
601 the very top.
602 The 'helplang' option is used to select a language, if
603 the main help file is available in several languages.
604 {not in Vi}
606 *{subject}* *E149* *E661*
607 :h[elp] {subject} Like ":help", additionally jump to the tag {subject}.
608 {subject} can include wildcards like "*", "?" and
609 "[a-z]":
610 :help z? jump to help for any "z" command
611 :help z. jump to the help for "z."
612 If there is no full match for the pattern, or there
613 are several matches, the "best" match will be used.
614 A sophisticated algorithm is used to decide which
615 match is better than another one. These items are
616 considered in the computation:
617 - A match with same case is much better than a match
618 with different case.
619 - A match that starts after a non-alphanumeric
620 character is better than a match in the middle of a
621 word.
622 - A match at or near the beginning of the tag is
623 better than a match further on.
624 - The more alphanumeric characters match, the better.
625 - The shorter the length of the match, the better.
627 The 'helplang' option is used to select a language, if
628 the {subject} is available in several languages.
629 To find a tag in a specific language, append "@ab",
630 where "ab" is the two-letter language code. See
631 |help-translated|.
633 Note that the longer the {subject} you give, the less
634 matches will be found. You can get an idea how this
635 all works by using commandline completion (type CTRL-D
636 after ":help subject").
637 If there are several matches, you can have them listed
638 by hitting CTRL-D. Example: >
639 :help cont<Ctrl-D>
640 < To use a regexp |pattern|, first do ":help" and then
641 use ":tag {pattern}" in the help window. The
642 ":tnext" command can then be used to jump to other
643 matches, "tselect" to list matches and choose one. >
644 :help index| :tse z.
645 < This command can be followed by '|' and another
646 command, but you don't need to escape the '|' inside a
647 help command. So these both work: >
648 :help |
649 :help k| only
650 < Note that a space before the '|' is seen as part of
651 the ":help" argument.
652 You can also use <LF> or <CR> to separate the help
653 command from a following command. You need to type
654 CTRL-V first to insert the <LF> or <CR>. Example: >
655 :help so<C-V><CR>only
656 < {not in Vi}
658 :h[elp]! [subject] Like ":help", but in non-English help files prefer to
659 find a tag in a file with the same language as the
660 current file. See |help-translated|.
662 *:helpg* *:helpgrep*
663 :helpg[rep] {pattern}[@xx]
664 Search all help text files and make a list of lines
665 in which {pattern} matches. Jumps to the first match.
666 The optional [@xx] specifies that only matches in the
667 "xx" language are to be found.
668 You can navigate through the matches with the
669 |quickfix| commands, e.g., |:cnext| to jump to the
670 next one. Or use |:cwindow| to get the list of
671 matches in the quickfix window.
672 {pattern} is used as a Vim regexp |pattern|.
673 'ignorecase' is not used, add "\c" to ignore case.
674 Example for case sensitive search: >
675 :helpgrep Uganda
676 < Example for case ignoring search: >
677 :helpgrep uganda\c
678 < Example for searching in French help: >
679 :helpgrep backspace@fr
680 < The pattern does not support line breaks, it must
681 match within one line. You can use |:grep| instead,
682 but then you need to get the list of help files in a
683 complicated way.
684 Cannot be followed by another command, everything is
685 used as part of the pattern. But you can use
686 |:execute| when needed.
687 Compressed help files will not be searched (Debian
688 compresses the help files).
689 {not in Vi}
691 *:lh* *:lhelpgrep*
692 :lh[elpgrep] {pattern}[@xx]
693 Same as ":helpgrep", except the location list is used
694 instead of the quickfix list. If the help window is
695 already opened, then the location list for that window
696 is used. Otherwise, a new help window is opened and
697 the location list for that window is set. The
698 location list for the current window is not changed.
700 *:exu* *:exusage*
701 :exu[sage] Show help on Ex commands. Added to simulate the Nvi
702 command. {not in Vi}
704 *:viu* *:viusage*
705 :viu[sage] Show help on Normal mode commands. Added to simulate
706 the Nvi command. {not in Vi}
708 When no argument is given to |:help| the file given with the 'helpfile' option
709 will be opened. Otherwise the specified tag is searched for in all "doc/tags"
710 files in the directories specified in the 'runtimepath' option.
712 The initial height of the help window can be set with the 'helpheight' option
713 (default 20).
715 Jump to specific subjects by using tags. This can be done in two ways:
716 - Use the "CTRL-]" command while standing on the name of a command or option.
717 This only works when the tag is a keyword. "<C-Leftmouse>" and
718 "g<LeftMouse>" work just like "CTRL-]".
719 - use the ":ta {subject}" command. This also works with non-keyword
720 characters.
722 Use CTRL-T or CTRL-O to jump back.
723 Use ":q" to close the help window.
725 If there are several matches for an item you are looking for, this is how you
726 can jump to each one of them:
727 1. Open a help window
728 2. Use the ":tag" command with a slash prepended to the tag. E.g.: >
729 :tag /min
730 3. Use ":tnext" to jump to the next matching tag.
732 It is possible to add help files for plugins and other items. You don't need
733 to change the distributed help files for that. See |add-local-help|.
735 To write a local help file, see |write-local-help|.
737 Note that the title lines from the local help files are automagically added to
738 the "LOCAL ADDITIONS" section in the "help.txt" help file |local-additions|.
739 This is done when viewing the file in Vim, the file itself is not changed. It
740 is done by going through all help files and obtaining the first line of each
741 file. The files in $VIMRUNTIME/doc are skipped.
743 *help-xterm-window*
744 If you want to have the help in another xterm window, you could use this
745 command: >
746 :!xterm -e vim +help &
747 <
749 *:helpfind* *:helpf*
750 :helpf[ind] Like |:help|, but use a dialog to enter the argument.
751 Only for backwards compatibility. It now executes the
752 ToolBar.FindHelp menu entry instead of using a builtin
753 dialog. {only when compiled with |+GUI_GTK|}
754 < {not in Vi}
756 *:helpt* *:helptags*
757 *E154* *E150* *E151* *E152* *E153* *E670*
758 :helpt[ags] [++t] {dir}
759 Generate the help tags file(s) for directory {dir}.
760 All "*.txt" and "*.??x" files in the directory are
761 scanned for a help tag definition in between stars.
762 The "*.??x" files are for translated docs, they
763 generate the "tags-??" file, see |help-translated|.
764 The generated tags files are sorted.
765 When there are duplicates an error message is given.
766 An existing tags file is silently overwritten.
767 The optional "++t" argument forces adding the
768 "help-tags" tag. This is also done when the {dir} is
769 equal to $VIMRUNTIME/doc.
770 To rebuild the help tags in the runtime directory
771 (requires write permission there): >
772 :helptags $VIMRUNTIME/doc
773 < {not in Vi}
776 TRANSLATED HELP *help-translated*
778 It is possible to add translated help files, next to the original English help
779 files. Vim will search for all help in "doc" directories in 'runtimepath'.
780 This is only available when compiled with the |+multi_lang| feature.
782 At this moment translations are available for:
783 Chinese - multiple authors
784 French - translated by David Blanchet
785 Italian - translated by Antonio Colombo
786 Polish - translated by Mikolaj Machowski
787 Russian - translated by Vassily Ragosin
788 See the Vim website to find them: http://www.vim.org/translations.php
790 A set of translated help files consists of these files:
792 help.abx
793 howto.abx
794 ...
795 tags-ab
797 "ab" is the two-letter language code. Thus for Italian the names are:
799 help.itx
800 howto.itx
801 ...
802 tags-it
804 The 'helplang' option can be set to the preferred language(s). The default is
805 set according to the environment. Vim will first try to find a matching tag
806 in the preferred language(s). English is used when it cannot be found.
808 To find a tag in a specific language, append "@ab" to a tag, where "ab" is the
809 two-letter language code. Example: >
810 :he user-manual@it
811 :he user-manual@en
812 The first one finds the Italian user manual, even when 'helplang' is empty.
813 The second one finds the English user manual, even when 'helplang' is set to
814 "it".
816 When using command-line completion for the ":help" command, the "@en"
817 extention is only shown when a tag exists for multiple languages. When the
818 tag only exists for English "@en" is omitted.
820 When using |CTRL-]| or ":help!" in a non-English help file Vim will try to
821 find the tag in the same language. If not found then 'helplang' will be used
822 to select a language.
824 Help files must use latin1 or utf-8 encoding. Vim assumes the encoding is
825 utf-8 when finding non-ASCII characters in the first line. Thus you must
826 translate the header with "For Vim version".
828 The same encoding must be used for the help files of one language in one
829 directory. You can use a different encoding for different languages and use
830 a different encoding for help files of the same language but in a different
831 directory.
833 Hints for translators:
834 - Do not translate the tags. This makes it possible to use 'helplang' to
835 specify the preferred language. You may add new tags in your language.
836 - When you do not translate a part of a file, add tags to the English version,
837 using the "tag@en" notation.
838 - Make a package with all the files and the tags file available for download.
839 Users can drop it in one of the "doc" directories and start use it.
840 Report this to Bram, so that he can add a link on www.vim.org.
841 - Use the |:helptags| command to generate the tags files. It will find all
842 languages in the specified directory.
844 ==============================================================================
845 3. Using Vim like less or more *less*
847 If you use the less or more program to view a file, you don't get syntax
848 highlighting. Thus you would like to use Vim instead. You can do this by
849 using the shell script "$VIMRUNTIME/macros/less.sh".
851 This shell script uses the Vim script "$VIMRUNTIME/macros/less.vim". It sets
852 up mappings to simulate the commands that less supports. Otherwise, you can
853 still use the Vim commands.
855 This isn't perfect. For example, when viewing a short file Vim will still use
856 the whole screen. But it works good enough for most uses, and you get syntax
857 highlighting.
859 The "h" key will give you a short overview of the available commands.
861 vim:tw=78:ts=8:ft=help:norl: