src/Makefile

   1 # Makefile for Vim on Unix and Unix-like systems        vim:ts=8:sw=8:tw=78
   2 #
   3 # This Makefile is loosely based on the GNU Makefile conventions found in
   4 # standards.info.
   5 #
   6 # Compiling Vim, summary:
   7 #
   8 #       3. make
   9 #       5. make install
  10 #
  11 # Compiling Vim, details:
  12 #
  13 # Edit this file for adjusting to your system. You should not need to edit any
  14 # other file for machine specific things!
  15 # The name of this file MUST be Makefile (note the uppercase 'M').
  16 #
  17 # 1. Edit this Makefile  {{{1
  18 #       The defaults for Vim should work on most machines, but you may want to
  19 #       uncomment some lines or make other changes below to tune it to your
  20 #       system, compiler or preferences.  Uncommenting means that the '#' in
  21 #       the first column of a line is removed.
  22 #       - If you want a version of Vim that is small and starts up quickly,
  23 #         you might want to disable the GUI, X11, Perl, Python and Tcl.
  24 #       - Uncomment the line with --disable-gui if you have Motif, GTK and/or
  25 #         Athena but don't want to make gvim (the GUI version of Vim with nice
  26 #         menus and scrollbars, but makes Vim bigger and startup slower).
  27 #       - Uncomment --disable-darwin if on Mac OS X but you want to compile a
  28 #         Unix version.
  29 #       - Uncomment the line "CONF_OPT_X = --without-x" if you have X11 but
  30 #         want to disable using X11 libraries.  This speeds up starting Vim,
  31 #         but the window title will not be set and the X11 selection can not
  32 #         used.
  33 #       - Uncomment the line "CONF_OPT_XSMP = --without-xsmp" if you have the
  34 #         X11 Session Management Protocol (XSMP) library (libSM) but do not
  35 #         want to use it.
  36 #         This can speedup Vim startup but Vim loses the ability to catch the
  37 #         user logging out from session-managers like GNOME and work
  38 #         could be lost.
  39 #       - Uncomment one or more of these lines to include an interface;
  40 #         each makes Vim quite a bit bigger:
  41 #               --enable-perlinterp     for Perl interpreter
  42 #               --enable-pythoninterp   for Python interpreter
  43 #               --enable-rubyinterp     for Ruby interpreter
  44 #               --enable-tclinterp      for Tcl interpreter
  45 #               --enable-cscope         for Cscope interface
  46 #       - Uncomment one of the lines with --with-features= to enable a set of
  47 #         features (but not the interfaces just mentioned).
  48 #       - Uncomment the line with --disable-acl to disable ACL support even
  49 #         though your system supports it.
  50 #       - Uncomment the line with --disable-gpm to disable gpm support
  51 #         even though you have gpm libraries and includes.
  52 #       - Uncomment the line with --disable-sysmouse to disable sysmouse
  53 #         support even though you have /dev/sysmouse and includes.
  54 #       - Uncomment one of the lines with CFLAGS and/or CC if you have
  55 #         something very special or want to tune the optimizer.
  56 #       - Search for the name of your system to see if it needs anything
  57 #         special.
  58 #       - A few versions of make use '.include "file"' instead of 'include
  59 #         file'.  Adjust the include line below if yours does.
  60 #
  61 # 2. Edit feature.h  {{{1
  62 #       Only if you do not agree with the default compile features, e.g.:
  63 #       - you want Vim to be as vi compatible as it can be
  64 #       - you want to use Emacs tags files
  65 #       - you want right-to-left editing (Hebrew)
  66 #       - you want 'langmap' support (Greek)
  67 #       - you want to remove features to make Vim smaller
  68 #
  69 # 3. "make"  {{{1
  70 #       Will first run ./configure with the options in this file. Then it will
  71 #       start make again on this Makefile to do the compiling. You can also do
  72 #       this in two steps with:
  73 #               make config
  74 #               make
  75 #       The configuration phase creates/overwrites auto/config.h and
  76 #       auto/config.mk.
  77 #       The configure script is created with "make autoconf".  It can detect
  78 #       different features of your system and act accordingly.  However, it is
  79 #       not correct for all systems.  Check this:
  80 #       - If you have X windows, but configure could not find it or reported
  81 #         another include/library directory then you wanted to use, you have
  82 #         to set CONF_OPT_X below.  You might also check the installation of
  83 #         xmkmf.
  84 #       - If you have --enable-gui=motif and have Motif on your system, but
  85 #         configure reports "checking for location of gui... <not found>", you
  86 #         have to set GUI_INC_LOC and GUI_LIB_LOC below.
  87 #       If you changed something, do this to run configure again:
  88 #               make reconfig
  89 #
  90 #       - If you do not trust the automatic configuration code, then inspect
  91 #         auto/config.h and auto/config.mk, before starting the actual build
  92 #         phase. If possible edit this Makefile, rather than auto/config.mk --
  93 #         especially look at the definition of VIMLOC below. Note that the
  94 #         configure phase overwrites auto/config.mk and auto/config.h again.
  95 #       - If you get error messages, find out what is wrong and try to correct
  96 #         it in this Makefile. You may need to do "make reconfig" when you
  97 #         change anything that configure uses (e.g. switching from an old C
  98 #         compiler to an ANSI C compiler). Only when auto/configure does
  99 #         something wrong you may need to change one of the other files. If
 100 #         you find a clean way to fix the problem, consider sending a note to
 101 #         the author of autoconf (bug-gnu-utils@prep.ai.mit.edu) or Vim
 102 #         (Bram@vim.org). Don't bother to do that when you made a hack
 103 #         solution for a non-standard system.
 104 #
 105 # 4. "make test"  {{{1
 106 #       This is optional.  This will run Vim scripts on a number of test
 107 #       files, and compare the produced output with the expected output.
 108 #       If all is well, you will get the "ALL DONE" message in the end.  If a
 109 #       test fails you get "TEST FAILURE".  See below (search for "/^test").
 110 #
 111 # 5. "make install"  {{{1
 112 #       If the new Vim seems to be working OK you can install it and the
 113 #       documentation in the appropriate location. The default is
 114 #       "/usr/local".  Change "prefix" below to change the location.
 115 #       "auto/pathdef.c" will be compiled again after changing this to make
 116 #       the executable know where the help files are located.
 117 #       Note that any existing executable is removed or overwritten.  If you
 118 #       want to keep it you will have to make a backup copy first.
 119 #       The runtime files are in a different directory for each version.  You
 120 #       might want to delete an older version.
 121 #       If you don't want to install everything, there are other targets:
 122 #               make installvim         only installs Vim, not the tools
 123 #               make installvimbin      only installs the Vim executable
 124 #               make installruntime     installs most of the runtime files
 125 #               make installrtbase      only installs the Vim help and
 126 #                                                       runtime files
 127 #               make installlinks       only installs the Vim binary links
 128 #               make installmanlinks    only installs the Vim manpage links
 129 #               make installmacros      only installs the Vim macros
 130 #               make installtutorbin    only installs the Vim tutor program
 131 #               make installtutor       only installs the Vim tutor files
 132 #               make installspell       only installs the spell files
 133 #               make installtools       only installs xxd
 134 #       If you install Vim, not to install for real but to prepare a package
 135 #       or RPM, set DESTDIR to the root of the tree.
 136 #
 137 # 6. Use Vim until a new version comes out.  {{{1
 138 #
 139 # 7. "make uninstall_runtime"  {{{1
 140 #       Will remove the runtime files for the current version.  This is safe
 141 #       to use while another version is being used, only version-specific
 142 #       files will be deleted.
 143 #       To remove the runtime files of another version:
 144 #               make uninstall_runtime VIMRTDIR=/vim54
 145 #       If you want to delete all installed files, use:
 146 #               make uninstall
 147 #       Note that this will delete files that have the same name for any
 148 #       version, thus you might need to do a "make install" soon after this.
 149 #       Be careful not to remove a version of Vim that is still being used!
 150 #       To find out which files and directories will be deleted, use:
 151 #               make -n uninstall
 152 # }}}
 153 #
 154 ### This Makefile has been successfully tested on many systems. {{{
 155 ### Only the ones that require special options are mentioned here.
 156 ### Check the (*) column for remarks, listed below.
 157 ### Later code changes may cause small problems, otherwise Vim is supposed to
 158 ### compile and run without problems.
 159
 160 #system:              configurations:                version (*) tested by:
 161 #-------------        ------------------------       -------  -  ----------
 162 #AIX 3.2.5            cc (not gcc)   -                  4.5  (M) Will Fiveash
 163 #AIX 4                cc             +X11 -GUI          3.27 (4) Axel Kielhorn
 164 #AIX 4.1.4            cc             +X11 +GUI          4.5  (5) Nico Bakker
 165 #AIX 4.2.1            cc                                5.2k (C) Will Fiveash
 166 #AIX 4.3.3.12         xic 3.6.6                         5.6  (5) David R. Favor
 167 #A/UX 3.1.1           gcc            +X11               4.0  (6) Jim Jagielski
 168 #BeOS PR              mwcc DR3                          5.0n (T) Olaf Seibert
 169 #BSDI 2.1 (x86)       shlicc2 gcc-2.6.3 -X11 X11R6      4.5  (1) Jos Backus
 170 #BSD/OS 3.0 (x86)     gcc gcc-2.7.2.1 -X11 X11R6        4.6c (1) Jos Backus
 171 #CX/UX 6.2            cc             +X11 +GUI_Mofif    5.4  (V) Kipp E. Howard
 172 #DG/UX 5.4*           gcc 2.5.8      GUI                5.0e (H) Jonas Schlein
 173 #DG/UX 5.4R4.20       gcc 2.7.2      GUI                5.0s (H) Rocky Olive
 174 #HP-UX (most)         c89 cc                            5.1  (2) Bram Moolenaar
 175 #HP-UX_9.04           cc             +X11 +Motif        5.0  (2) Carton Lao
 176 #Irix 6.3 (O2)        cc             ?                  4.5  (L) Edouard Poor
 177 #Irix 6.4             cc             ?                  5.0m (S) Rick Sayre
 178 #Irix 6.5             cc             ?                  6.0  (S) David Harrison
 179 #Irix 64 bit                                            4.5  (K) Jon Wright
 180 #Linux 2.0            gcc-2.7.2      Infomagic Motif    4.3  (3) Ronald Rietman
 181 #Linux 2.0.31         gcc            +X11 +GUI Athena   5.0w (U) Darren Hiebert
 182 #LynxOS 3.0.1         2.9-gnupro-98r2 +X11 +GUI Athena  5.7.1(O) Lorenz Hahn
 183 #LynxOS 3.1.0         2.9-gnupro-98r2 +X11 +GUI Athena  5.7.1(O) Lorenz Hahn
 184 #NEC UP4800 UNIX_SV 4.2MP  cc        +X11R6 Motif,Athena4.6b (Q) Lennart Schultz
 185 #NetBSD 1.0A          gcc-2.4.5      -X11 -GUI          3.21 (X) Juergen Weigert
 186 #QNX 4.2              wcc386-10.6    -X11               4.2  (D) G.F. Desrochers
 187 #QNX 4.23             Watcom         -X11               4.2  (F) John Oleynick
 188 #SCO Unix v3.2.5      cc             +X11 Motif         3.27 (C) M. Kuperblum
 189 #SCO Open Server 5    gcc 2.7.2.3    +X11 +GUI Motif    5.3  (A) Glauber Ribeiro
 190 #SINIX-N 5.43 RM400 R4000   cc       +X11 +GUI          5.0l (I) Martin Furter
 191 #SINIX-Z 5.42 i386    gcc 2.7.2.3    +X11 +GUI Motif    5.1  (I) Joachim Fehn
 192 #SINIX-Y 5.43 RM600 R4000  gcc 2.7.2.3 +X11 +GUI Motif  5.1  (I) Joachim Fehn
 193 #Reliant/SINIX 5.44   cc             +X11 +GUI          5.5a (I) B. Pruemmer
 194 #SNI Targon31 TOS 4.1.11 gcc-2.4.5   +X11 -GUI          4.6c (B) Paul Slootman
 195 #Solaris 2.4 (Sparc)  cc             +X11 +GUI          3.29 (9) Glauber
 196 #Solaris 2.4/2.5      clcc           +X11 -GUI openwin  3.20 (7) Robert Colon
 197 #Solaris 2.5 (sun4m)  cc (SC4.0)     +X11R6 +GUI (CDE)  4.6b (E) Andrew Large
 198 #Solaris 2.5          cc             +X11 +GUI Athena   4.2  (9) Sonia Heimann
 199 #Solaris 2.5          gcc 2.5.6      +X11 Motif         5.0m (R) Ant. Colombo
 200 #Solaris 2.6          gcc 2.8.1      ncursus            5.3  (G) Larry W. Virden
 201 #Solaris with -lthread                                  5.5  (W) K. Nagano
 202 #Solaris              gcc                                    (b) Riccardo
 203 #SunOS 4.1.x                         +X11 -GUI          5.1b (J) Bram Moolenaar
 204 #SunOS 4.1.3_U1 (sun4c) gcc          +X11 +GUI Athena   5.0w (J) Darren Hiebert
 205 #SUPER-UX 6.2 (NEC SX-4) cc          +X11R6 Motif,Athena4.6b (P) Lennart Schultz
 206 #Tandem/NSK                                                  (c) Matthew Woehlke
 207 #Unisys 6035          cc             +X11 Motif         5.3  (8) Glauber Ribeiro
 208 #ESIX V4.2            cc             +X11               6.0  (a) Reinhard Wobst
 209 #Mac OS X 10.[23]     gcc            Carbon             6.2  (x) Bram Moolenaar
 210 # }}}
 211
 212 # (*)  Remarks: {{{
 213 #
 214 # (1)  Uncomment line below for shlicc2
 215 # (2)  HPUX with compile problems or wrong digraphs, uncomment line below
 216 # (3)  Infomagic Motif needs GUI_LIB_LOC and GUI_INC_LOC set, see below.
 217 #      And add "-lXpm" to MOTIF_LIBS2.
 218 # (4)  For cc the optimizer must be disabled (use CFLAGS= after running
 219 #      configure) (symptom: ":set termcap" output looks weird).
 220 # (5)  Compiler may need extra argument, see below.
 221 # (6)  See below for a few lines to uncomment
 222 # (7)  See below for lines which enable the use of clcc
 223 # (8)  Needs some EXTRA_LIBS, search for Unisys below
 224 # (9)  Needs an extra compiler flag to compile gui_at_sb.c, see below.
 225 # (A)  May need EXTRA_LIBS, see below
 226 # (B)  Can't compile GUI because there is no waitpid()...  Disable GUI below.
 227 # (C)  Force the use of curses instead of termcap, see below.
 228 # (D)  Uncomment lines below for QNX
 229 # (E)  You might want to use termlib instead of termcap, see below.
 230 # (F)  See below for instructions.
 231 # (G)  Using ncursus version 4.2 has reported to cause a crash.  Use the
 232 #      Sun cursus library instead.
 233 # (H)  See line for EXTRA_LIBS below.
 234 # (I)  SINIX-N 5.42 and 5.43 need some EXTRA_LIBS.  Also for Reliant-Unix.
 235 # (J)  If you get undefined symbols, see below for a solution.
 236 # (K)  See lines to uncomment below for machines with 64 bit pointers.
 237 # (L)  For Silicon Graphics O2 workstations remove "-lnsl" from auto/config.mk
 238 # (M)  gcc version cygnus-2.0.1 does NOT work (symptom: "dl" deletes two
 239 #      characters instead of one).
 240 # (N)  SCO with decmouse.
 241 # (O)  LynxOS needs EXTRA_LIBS, see below.
 242 # (P)  For SuperUX 6.2 on NEC SX-4 see a few lines below to uncomment.
 243 # (Q)  For UNIXSVR 4.2MP on NEC UP4800 see below for lines to uncomment.
 244 # (R)  For Solaris 2.5 (or 2.5.1) with gcc > 2.5.6, uncomment line below.
 245 # (S)  For Irix 6.x with MipsPro compiler, use -OPT:Olimit.  See line below.
 246 # (T)  See ../doc/os_beos.txt.
 247 # (U)  Must uncomment CONF_OPT_PYTHON option below to disable Python
 248 #      detection, since the configure script runs into an error when it
 249 #      detects Python (probably because of the bash shell).
 250 # (V)  See lines to uncomment below.
 251 # (X)  Need to use the .include "auto/config.mk" line below
 252 # (Y)  See line with c89 below
 253 # (Z)  See lines with cc or c89 below
 254 # (a)  See line with EXTRA_LIBS below.
 255 # (b)  When using gcc with the Solaris linker, make sure you don't use GNU
 256 #      strip, otherwise the binary may not run: "Cannot find ELF".
 257 # (c)  Add -lfloss to EXTRA_LIBS, see below.
 258 # (x)  When you get warnings for precompiled header files, run
 259 #      "sudo fixPrecomps".  Also see CONF_OPT_DARWIN below.
 260 # }}}
 261
 262
 263 #DO NOT CHANGE the next line, we need it for configure to find the compiler
 264 #instead of using the default from the "make" program.
 265 #Use a line further down to change the value for CC.
 266 CC=
 267
 268 # Change and use these defines if configure cannot find your Motif stuff.
 269 # Unfortunately there is no "standard" location for Motif. {{{
 270 # These defines can contain a single directory (recommended) or a list of
 271 # directories (for when you are working with several systems). The LAST
 272 # directory that exists is used.
 273 # When changed, run "make reconfig" next!
 274 #GUI_INC_LOC = -I/usr/include/Motif2.0 -I/usr/include/Motif1.2
 275 #GUI_LIB_LOC = -L/usr/lib/Motif2.0 -L/usr/lib/Motif1.2
 276 ### Use these two lines for Infomagic Motif (3)
 277 #GUI_INC_LOC = -I/usr/X11R6/include
 278 #GUI_LIB_LOC = -L/usr/X11R6/lib
 279 # }}}
 280
 281 ######################## auto/config.mk ######################## {{{1
 282 # At this position auto/config.mk is included. When starting from the
 283 # distribution it is almost empty. After running auto/configure it contains
 284 # settings that have been discovered for your system. Settings below this
 285 # include override settings in auto/config.mk!
 286
 287 # Note: if auto/config.mk is lost somehow (e.g., because configure was
 288 # interrupted), create an empty auto/config.mk file and do "make config".
 289
 290 # (X) How to include auto/config.mk depends on the version of "make" you have,
 291 #     if the current choice doesn't work, try the other one.
 292
 293 include auto/config.mk
 294 #.include "auto/config.mk"
 295 CClink = $(CC)
 296
 297 #}}}
 298
 299 # Include the configuration choices first, so we can override everything
 300 # below. As shipped, this file contains a target that causes to run
 301 # configure. Once configure was run, this file contains a list of
 302 # make variables with predefined values instead. Thus any second invocation
 303 # of make, will build Vim.
 304
 305 # CONFIGURE - configure arguments {{{1
 306 # You can give a lot of options to configure.
 307 # Change this to your desire and do 'make config' afterwards
 308
 309 # examples (can only use one!):
 310 #CONF_ARGS = --exec-prefix=/usr
 311 #CONF_ARGS = --with-vim-name=vim7 --with-ex-name=ex7 --with-view-name=view7
 312 #CONF_ARGS = --with-global-runtime=/etc/vim
 313 #CONF_ARGS = --with-local-dir=/usr/share
 314 #CONF_ARGS = --without-local-dir
 315
 316 # Use this one if you distribute a modified version of Vim.
 317 #CONF_ARGS = --with-modified-by="John Doe"
 318
 319 # GUI - For creating Vim with GUI (gvim) (B)
 320 # Uncomment this line when you don't want to get the GUI version, although you
 321 # have GTK, Motif and/or Athena.  Also use --without-x if you don't want X11
 322 # at all.
 323 #CONF_OPT_GUI = --disable-gui
 324
 325 # Uncomment one of these lines if you have that GUI but don't want to use it.
 326 # The automatic check will use another one that can be found.
 327 # Gnome is disabled by default, it may cause trouble.
 328 #CONF_OPT_GUI = --disable-gtk-check
 329 #CONF_OPT_GUI = --disable-gtk2-check
 330 #CONF_OPT_GUI = --enable-gnome-check
 331 #CONF_OPT_GUI = --enable-gnome2-check
 332 #CONF_OPT_GUI = --disable-motif-check
 333 #CONF_OPT_GUI = --disable-athena-check
 334 #CONF_OPT_GUI = --disable-nextaw-check
 335
 336 # Uncomment one of these lines to select a specific GUI to use.
 337 # When using "yes" or nothing, configure will use the first one found: GTK+,
 338 # Motif or Athena.
 339 #
 340 # GTK versions that are known not to work 100% are rejected.
 341 # Use "--disable-gtktest" to accept them anyway.
 342 #
 343 # GNOME means GTK with Gnome support.  If using GTK and --enable-gnome-check
 344 # is used then GNOME will automatically be used if it is found.  If you have
 345 # GNOME, but do not want to use it (e.g., want a GTK-only version), then use
 346 # --enable-gui=gtk or leave out --enable-gnome-check.
 347 #
 348 # If the selected GUI isn't found, the GUI is disabled automatically
 349 #CONF_OPT_GUI = --enable-gui=gtk
 350 #CONF_OPT_GUI = --enable-gui=gtk --disable-gtktest
 351 #CONF_OPT_GUI = --enable-gui=gtk2
 352 #CONF_OPT_GUI = --enable-gui=gtk2 --disable-gtktest
 353 #CONF_OPT_GUI = --enable-gui=gnome
 354 #CONF_OPT_GUI = --enable-gui=gnome2
 355 #CONF_OPT_GUI = --enable-gui=gnome2 --disable-gtktest
 356 #CONF_OPT_GUI = --enable-gui=motif
 357 #CONF_OPT_GUI = --enable-gui=motif --with-motif-lib="-static -lXm -shared"
 358 #CONF_OPT_GUI = --enable-gui=athena
 359 #CONF_OPT_GUI = --enable-gui=nextaw
 360
 361 # DARWIN - detecting Mac OS X
 362 # Uncomment this line when you want to compile a Unix version of Vim on
 363 # Darwin.  None of the Mac specific options or files will be used.
 364 #CONF_OPT_DARWIN = --disable-darwin
 365
 366 # Select the architecture supported.  Default is to build for the current
 367 # platform.  Use "both" for a universal binary.  That probably doesn't work
 368 # when including Perl, Python, etc.
 369 #CONF_OPT_DARWIN = --with-mac-arch=i386
 370 #CONF_OPT_DARWIN = --with-mac-arch=ppc
 371 #CONF_OPT_DARWIN = --with-mac-arch=both
 372
 373 # PERL
 374 # Uncomment this when you want to include the Perl interface.
 375 # The Perl option sometimes causes problems, because it adds extra flags
 376 # to the command line.  If you see strange flags during compilation, check in
 377 # auto/config.mk where they come from.  If it's PERL_CFLAGS, try commenting
 378 # the next line.
 379 # When you get an error for a missing "perl.exp" file, try creating an emtpy
 380 # one: "touch perl.exp".
 381 # This requires at least "small" features, "tiny" doesn't work.
 382 #CONF_OPT_PERL = --enable-perlinterp
 383
 384 # PYTHON
 385 # Uncomment this when you want to include the Python interface.
 386 # NOTE: This may cause threading to be enabled, which has side effects (such
 387 # as using different libraries and debugging becomes more difficult).
 388 # NOTE: Using this together with Perl may cause a crash in initialization.
 389 #CONF_OPT_PYTHON = --enable-pythoninterp
 390
 391 # TCL
 392 # Uncomment this when you want to include the Tcl interface.
 393 #CONF_OPT_TCL = --enable-tclinterp
 394 #CONF_OPT_TCL = --enable-tclinterp --with-tclsh=tclsh8.4
 395
 396 # RUBY
 397 # Uncomment this when you want to include the Ruby interface.
 398 #CONF_OPT_RUBY = --enable-rubyinterp
 399
 400 # MZSCHEME
 401 # Uncomment this when you want to include the MzScheme interface.
 402 #CONF_OPT_MZSCHEME = --enable-mzschemeinterp
 403 # PLT/mrscheme/drscheme Home dir; the PLTHOME environment variable also works
 404 #CONF_OPT_PLTHOME  = --with-plthome=/usr/local/plt
 405 #CONF_OPT_PLTHOME  = --with-plthome=/usr/local/drscheme
 406 #CONF_OPT_PLTHOME  = --with-plthome=/home/me/mz
 407
 408 # CSCOPE
 409 # Uncomment this when you want to include the Cscope interface.
 410 #CONF_OPT_CSCOPE = --enable-cscope
 411
 412 # WORKSHOP - Sun Visual Workshop interface.  Only works with Motif!
 413 #CONF_OPT_WORKSHOP = --enable-workshop
 414
 415 # NETBEANS - NetBeans interface. Only works with Motif, GTK, and gnome.
 416 # Motif version must have XPM libraries (see |workshop-xpm|).
 417 # Uncomment this when you do not want the netbeans interface.
 418 #CONF_OPT_NETBEANS = --disable-netbeans
 419
 420 # SNIFF - Include support for SNiFF+.
 421 #CONF_OPT_SNIFF = --enable-sniff
 422
 423 # MULTIBYTE - To edit multi-byte characters.
 424 # Uncomment this when you want to edit a multibyte language.
 425 # It's automatically enabled with big features or IME support.
 426 # Note: Compile on a machine where setlocale() actually works, otherwise the
 427 # configure tests may fail.
 428 #CONF_OPT_MULTIBYTE = --enable-multibyte
 429
 430 # NLS - National Language Support
 431 # Uncomment this when you do not want to support translated messages, even
 432 # though configure can find support for it.
 433 #CONF_OPT_NLS = --disable-nls
 434
 435 # XIM - X Input Method.  Special character input support for X11 (Chinese,
 436 # Japanese, special symbols, etc).  Also needed for dead-key support.
 437 # When omitted it's automatically enabled for the X-windows GUI.
 438 # HANGUL - Input Hangul (Korean) language using internal routines.
 439 # Uncomment one of these when you want to input a multibyte language.
 440 #CONF_OPT_INPUT = --enable-xim
 441 #CONF_OPT_INPUT = --disable-xim
 442 #CONF_OPT_INPUT = --enable-hangulinput
 443
 444 # FONTSET - X fontset support for output of languages with many characters.
 445 # Uncomment this when you want to output a multibyte language.
 446 #CONF_OPT_OUTPUT = --enable-fontset
 447
 448 # ACL - Uncomment this when you do not want to include ACL support, even
 449 # though your system does support it.  E.g., when it's buggy.
 450 #CONF_OPT_ACL = --disable-acl
 451
 452 # gpm - For mouse support on Linux console via gpm
 453 # Uncomment this when you do not want to include gpm support, even
 454 # though you have gpm libraries and includes.
 455 #CONF_OPT_GPM = --disable-gpm
 456
 457 # sysmouse - For mouse support on FreeBSD and DragonFly console via sysmouse
 458 # Uncomment this when you do not want do include sysmouse support, even
 459 # though you have /dev/sysmouse and includes.
 460 #CONF_OPT_SYSMOUSE = --disable-sysmouse
 461
 462 # FEATURES - For creating Vim with more or less features
 463 # Uncomment one of these lines when you want to include few to many features.
 464 # The default is "normal".
 465 #CONF_OPT_FEAT = --with-features=tiny
 466 #CONF_OPT_FEAT = --with-features=small
 467 #CONF_OPT_FEAT = --with-features=normal
 468 #CONF_OPT_FEAT = --with-features=big
 469 #CONF_OPT_FEAT = --with-features=huge
 470
 471 # COMPILED BY - For including a specific e-mail address for ":version".
 472 #CONF_OPT_COMPBY = "--with-compiledby=John Doe <JohnDoe@yahoo.com>"
 473
 474 # X WINDOWS DISABLE - For creating a plain Vim without any X11 related fancies
 475 # (otherwise Vim configure will try to include xterm titlebar access)
 476 # Also disable the GUI above, otherwise it will be included anyway.
 477 # When both GUI and X11 have been disabled this may save about 15% of the
 478 # code and make Vim startup quicker.
 479 #CONF_OPT_X = --without-x
 480
 481 # X WINDOWS DIRECTORY - specify X directories
 482 # If configure can't find you X stuff, or if you have multiple X11 derivatives
 483 # installed, you may wish to specify which one to use.
 484 # Select nothing to let configure choose.
 485 # This here selects openwin (as found on sun).
 486 #XROOT = /usr/openwin
 487 #CONF_OPT_X = --x-include=$(XROOT)/include --x-libraries=$(XROOT)/lib
 488
 489 # X11 Session Management Protocol support
 490 # Vim will try to use XSMP to catch the user logging out if there are unsaved
 491 # files.  Uncomment this line to disable that (it prevents vim trying to open
 492 # communications with the session manager).
 493 #CONF_OPT_XSMP = --disable-xsmp
 494
 495 # You may wish to include xsmp but use exclude xsmp-interact if the logout
 496 # XSMP functionality does not work well with your session-manager (at time of
 497 # writing, this would be early GNOME-1 gnome-session: it 'freezes' other
 498 # applications after Vim has cancelled a logout (until Vim quits).  This
 499 # *might* be the Vim code, but is more likely a bug in early GNOME-1.
 500 # This disables the dialog that asks you if you want to save files or not.
 501 #CONF_OPT_XSMP = --disable-xsmp-interact
 502
 503 # COMPILER - Name of the compiler {{{1
 504 # The default from configure will mostly be fine, no need to change this, just
 505 # an example. If a compiler is defined here, configure will use it rather than
 506 # probing for one. It is dangerous to change this after configure was run.
 507 # Make will use your choice then -- but beware: Many things may change with
 508 # another compiler.  It is wise to run 'make reconfig' to start all over
 509 # again.
 510 #CC = cc
 511 #CC = gcc
 512
 513 # COMPILER FLAGS - change as you please. Either before running {{{1
 514 # configure or afterwards. For examples see below.
 515 # When using -g with some older versions of Linux you might get a
 516 # statically linked executable.
 517 # When not defined, configure will try to use -O2 -g for gcc and -O for cc.
 518 #CFLAGS = -g
 519 #CFLAGS = -O
 520
 521 # Optimization limits - depends on the compiler.  Automatic check in configure
 522 # doesn't work very well, because many compilers only give a warning for
 523 # unrecognized arguments.
 524 #CFLAGS = -O -OPT:Olimit=2600
 525 #CFLAGS = -O -Olimit 2000
 526 #CFLAGS = -O -FOlimit,2000
 527
 528 # Often used for GCC: mixed optimizing, lot of optimizing, debugging
 529 #CFLAGS = -g -O2 -fno-strength-reduce -Wall -Wshadow -Wmissing-prototypes
 530 #CFLAGS = -g -O2 -fno-strength-reduce -Wall -Wmissing-prototypes
 531 #CFLAGS = -g -Wall -Wmissing-prototypes
 532 #CFLAGS = -O6 -fno-strength-reduce -Wall -Wshadow -Wmissing-prototypes
 533 #CFLAGS = -g -DDEBUG -Wall -Wshadow -Wmissing-prototypes
 534 #CFLAGS = -g -O2 '-DSTARTUPTIME="vimstartup"' -fno-strength-reduce -Wall -Wmissing-prototypes
 535
 536 # Use this with GCC to check for mistakes, unused arguments, etc.
 537 #CFLAGS = -g -Wall -Wextra -Wmissing-prototypes -Wunreachable-code
 538 #PYTHON_CFLAGS_EXTRA = -Wno-missing-field-initializers
 539 #MZSCHEME_CFLAGS_EXTRA = -Wno-unreachable-code -Wno-unused-parameter
 540
 541 # EFENCE - Electric-Fence malloc debugging: catches memory accesses beyond
 542 # allocated memory (and makes every malloc()/free() very slow).
 543 # Electric Fence is free (search ftp sites).
 544 # You may want to set the EF_PROTECT_BELOW environment variable to check the
 545 # other side of allocated memory.
 546 # On FreeBSD you might need to enlarge the number of mmaps allowed.  Do this
 547 # as root: sysctl -w vm.max_proc_mmap=30000
 548 #EXTRA_LIBS = /usr/local/lib/libefence.a
 549
 550 # PURIFY - remove the # to use the "purify" program (hoi Nia++!)
 551 #PURIFY = purify
 552
 553 # NBDEBUG - debugging the netbeans interface.
 554 #EXTRA_DEFS = -DNBDEBUG
 555
 556 # }}}
 557
 558 # LINT - for running lint
 559 #  For standard Unix lint
 560 LINT = lint
 561 LINT_OPTIONS = -beprxzF
 562 #  For splint
 563 #  It doesn't work well, crashes on include files and non-ascii characters.
 564 #LINT = splint
 565 #LINT_OPTIONS = +unixlib -weak -macrovarprefixexclude -showfunc -linelen 9999
 566
 567 # PROFILING - Uncomment the next two lines to do profiling with gcc and gprof.
 568 # Might not work with GUI or Perl.
 569 # For unknown reasons adding "-lc" fixes a linking problem with GCC.  That's
 570 # probably a bug in the "-pg" implementation.
 571 # Need to recompile everything after changing this: "make clean" "make".
 572 #PROFILE_CFLAGS = -pg -g -DWE_ARE_PROFILING
 573 #PROFILE_LIBS = -pg
 574 #PROFILE_LIBS = -pg -lc
 575
 576 # MEMORY LEAK DETECTION
 577 # Requires installing the ccmalloc library.
 578 # Configuration is in the .ccmalloc or ~/.ccmalloc file.
 579 # Doesn't work very well, since memory linked to from global variables
 580 # (in libraries) is also marked as leaked memory.
 581 #PROFILE_CFLAGS = -DEXITFREE
 582 #PROFILE_LIBS = -lccmalloc
 583
 584 #####################################################
 585 ###  Specific systems, check if yours is listed!  ### {{{
 586 #####################################################
 587
 588 ### Uncomment things here only if the values chosen by configure are wrong.
 589 ### It's better to adjust configure.in and "make autoconf", if you can!
 590 ### Then send the required changes to configure.in to the bugs list.
 591
 592 ### (1) BSD/OS 2.0.1, 2.1 or 3.0 using shared libraries
 593 ###
 594 #CC = shlicc2
 595 #CFLAGS = -O2 -g -m486 -Wall -Wshadow -Wmissing-prototypes -fno-builtin
 596
 597 ### (2) HP-UX with a non-ANSI cc, use the c89 ANSI compiler
 598 ###     The first probably works on all systems
 599 ###     The second should work a bit better on newer systems
 600 ###     The third should work a bit better on HPUX 11.11
 601 ###     Information provided by: Richard Allen <ra@rhi.hi.is>
 602 #CC = c89 -D_HPUX_SOURCE
 603 #CC = c89 -O +Onolimit +ESlit -D_HPUX_SOURCE
 604 #CC = c89 -O +Onolimit +ESlit +e -D_HPUX_SOURCE
 605
 606 ### (2) For HP-UX: Enable the use of a different set of digraphs.  Use this
 607 ###     when the default (ISO) digraphs look completely wrong.
 608 ###     After changing this do "touch digraph.c; make".
 609 #EXTRA_DEFS = -DHPUX_DIGRAPHS
 610
 611 ### (2) For HP-UX: 9.04 cpp default macro definition table of 128000 bytes
 612 ###     is too small to compile many routines.  It produces too much defining
 613 ###     and no space errors.
 614 ###     Uncomment the following to specify a larger macro definition table.
 615 #CFLAGS = -Wp,-H256000
 616
 617 ### (2) For HP-UX 10.20 using the HP cc, with X11R6 and Motif 1.2, with
 618 ###     libraries in /usr/lib instead of /lib (avoiding transition links).
 619 ###     Information provided by: David Green
 620 #XROOT = /usr
 621 #CONF_OPT_X = --x-include=$(XROOT)/include/X11R6 --x-libraries=$(XROOT)/lib/X11R6
 622 #GUI_INC_LOC = -I/usr/include/Motif1.2
 623 #GUI_LIB_LOC = -L/usr/lib/Motif1.2_R6
 624
 625 ### (5) AIX 4.1.4 with cc
 626 #CFLAGS = -O -qmaxmem=8192
 627
 628 ###     AIX with c89 (Walter Briscoe)
 629 #CC = c89
 630 #CPPFLAGS = -D_ALL_SOURCE
 631
 632 ###     AIX 4.3.3.12 with xic 3.6.6 (David R. Favor)
 633 #       needed to avoid a problem where strings.h gets included
 634 #CFLAGS = -qsrcmsg -O2 -qmaxmem=8192 -D__STR31__
 635
 636 ### (W) Solaris with multi-threaded libraries (-lthread):
 637 ###     If suspending doesn't work properly, try using this line:
 638 #EXTRA_DEFS = -D_REENTRANT
 639
 640 ### (7) Solaris 2.4/2.5 with Centerline compiler
 641 #CC = clcc
 642 #X_LIBS_DIR = -L/usr/openwin/lib -R/usr/openwin/lib
 643 #CFLAGS = -O
 644
 645 ### (9) Solaris 2.x with cc (SunPro), using Athena.
 646 ###     Only required for compiling gui_at_sb.c.
 647 ###     Symptom: "identifier redeclared: vim_XawScrollbarSetThumb"
 648 ###     Use one of the lines (either Full ANSI or no ANSI at all)
 649 #CFLAGS = $(CFLAGS) -Xc
 650 #CFLAGS = $(CFLAGS) -Xs
 651
 652 ### Solaris 2.3 with X11 and specific cc
 653 #CC=/opt/SUNWspro/bin/cc -O -Xa -v -R/usr/openwin/lib
 654
 655 ### Solaris with /usr/ucb/cc (it is rejected by autoconf as "cc")
 656 #CC         = /usr/ucb/cc
 657 #EXTRA_LIBS = -R/usr/ucblib
 658
 659 ### Solaris with Forte Developer and FEAT_SUN_WORKSHOP
 660 # The Xpm library is available from http://koala.ilog.fr/ftp/pub/xpm.
 661 #CC             = cc
 662 #XPM_DIR                = /usr/local/xpm/xpm-3.4k-solaris
 663 #XPM_LIB                = -L$(XPM_DIR)/lib -R$(XPM_DIR)/lib -lXpm
 664 #XPM_IPATH      = -I$(XPM_DIR)/include
 665 #EXTRA_LIBS     = $(XPM_LIB)
 666 #EXTRA_IPATHS   = $(XPM_IPATH)
 667 #EXTRA_DEFS     = -xCC -DHAVE_X11_XPM_H
 668
 669 ### Solaris with workshop compilers: Vim is unstable when compiled with
 670 # "-fast".  Use this instead. (Shea Martin)
 671 #CFLAGS = -x02 -xtarget=ultra
 672
 673 ### (R) for Solaris 2.5 (or 2.5.1) with gcc > 2.5.6 you might need this:
 674 #LDFLAGS = -lw -ldl -lXmu
 675 #GUI_LIB_LOC = -L/usr/local/lib
 676
 677 ### (8) Unisys 6035 (Glauber Ribeiro)
 678 #EXTRA_LIBS = -lnsl -lsocket -lgen
 679
 680 ### When builtin functions cause problems with gcc (for Sun 4.1.x)
 681 #CFLAGS = -O2 -Wall -traditional -Wno-implicit
 682
 683 ### Apollo DOMAIN (with SYSTYPE = bsd4.3) (TESTED for version 3.0)
 684 #EXTRA_DEFS = -DDOMAIN
 685 #CFLAGS= -O -A systype,bsd4.3
 686
 687 ### Coherent 4.2.10 on Intel 386 platform
 688 #EXTRA_DEFS = -Dvoid=int
 689 #EXTRA_LIBS = -lterm -lsocket
 690
 691 ### SCO 3.2, with different library name for terminfo
 692 #EXTRA_LIBS = -ltinfo
 693
 694 ### UTS2 for Amdahl UTS 2.1.x
 695 #EXTRA_DEFS = -DUTS2
 696 #EXTRA_LIBS = -lsocket
 697
 698 ### UTS4 for Amdahl UTS 4.x
 699 #EXTRA_DEFS = -DUTS4 -Xa
 700
 701 ### USL for Unix Systems Laboratories (SYSV 4.2)
 702 #EXTRA_DEFS = -DUSL
 703
 704 ### RISCos on MIPS without X11
 705 #EXTRA_DEFS = -DMIPS
 706
 707 ### RISCos on MIPS with X11
 708 #EXTRA_LIBS = -lsun
 709
 710 ### (6)  A/UX 3.1.1 with gcc (Jim Jagielski)
 711 #CC= gcc -D_POSIX_SOURCE
 712 #CFLAGS= -O2
 713 #EXTRA_LIBS = -lposix -lbsd -ltermcap -lX11
 714
 715 ### (A)  Some versions of SCO Open Server 5 (Jan Christiaan van Winkel)
 716 ###      Also use the CONF_TERM_LIB below!
 717 #EXTRA_LIBS = -lgen
 718
 719 ### (D)  QNX (by G.F. Desrochers)
 720 #CFLAGS = -g -O -mf -4
 721
 722 ### (F)  QNX (by John Oleynick)
 723 # 1. If you don't have an X server: Comment out CONF_OPT_GUI and uncomment
 724 #    CONF_OPT_X = --without-x.
 725 # 2. make config
 726 # 3. edit auto/config.mk and remove -ldir and -ltermcap from LIBS.  It doesn't
 727 #       have -ldir (does config find it somewhere?) and -ltermcap has at
 728 #       least one problem so I use termlib.o instead.  The problem with
 729 #       termcap is that it segfaults if you call it with the name of
 730 #       a non-existent terminal type.
 731 # 4. edit auto/config.h and add #define USE_TMPNAM
 732 # 5. add termlib.o to OBJ
 733 # 6. make
 734
 735 ### (H)  for Data general DG/UX 5.4.2 and 5.4R3.10 (Jonas J. Schlein)
 736 #EXTRA_LIBS = -lgen
 737
 738 ### (I) SINIX-N 5.42 or 5.43 RM400 R4000 (also SINIX-Y and SINIX-Z)
 739 #EXTRA_LIBS = -lgen -lnsl
 740 ###   For SINIX-Y this is needed for the right prototype of gettimeofday()
 741 #EXTRA_DEFS = -D_XPG_IV
 742
 743 ### (I) Reliant-Unix (aka SINIX) 5.44 with standard cc
 744 #       Use both "-F O3" lines for optimization or the "-g" line for debugging
 745 #EXTRA_LIBS = -lgen -lsocket -lnsl -lSM -lICE
 746 #CFLAGS = -F O3 -DSINIXN
 747 #LDFLAGS = -F O3
 748 #CFLAGS = -g -DSINIXN
 749
 750 ### (P)  SCO 3.2.42, with different termcap names for some useful keys DJB
 751 #EXTRA_DEFS = -DSCOKEYS -DNETTERM_MOUSE -DDEC_MOUSE -DXTERM_MOUSE -DHAVE_GETTIMEOFDAY
 752 #EXTRA_LIBS = -lsocket -ltermcap -lmalloc -lc_s
 753
 754 ### (P)  SuperUX 6.2 on NEC SX-4 (Lennart Schultz)
 755 #GUI_INC_LOC = -I/usr/include
 756 #GUI_LIB_LOC = -L/usr/lib
 757 #EXTRA_LIBS = -lgen
 758
 759 ### (Q) UNIXSVR 4.2MP on NEC UP4800 (Lennart Schultz)
 760 #GUI_INC_LOC = -I/usr/necccs/include
 761 #GUI_LIB_LOC = -L/usr/necccs/lib/X11R6
 762 #XROOT = /usr/necccs
 763 #CONF_OPT_X = --x-include=$(XROOT)/include --x-libraries=$(XROOT)/lib/X11R6
 764 #EXTRA_LIBS = -lsocket -lgen
 765
 766 ### Irix 4.0 & 5.2 (Silicon Graphics Machines, __sgi will be defined)
 767 # Not needed for Irix 5.3, Ives Aerts reported
 768 #EXTRA_LIBS = -lmalloc -lc_s
 769 # Irix 4.0, when regexp and regcmp cannot be found when linking:
 770 #EXTRA_LIBS = -lmalloc -lc_s -lPW
 771
 772 ### (S) Irix 6.x (MipsPro compiler): Uses different Olimit flag:
 773 # Note: This newer option style is used with the MipsPro compilers ONLY if
 774 #       you are compiling an "n32" or "64" ABI binary (use either a -n32
 775 #       flag or a -64 flag for CFLAGS).  If you explicitly use a -o32 flag,
 776 #       then the CFLAGS option format will be the typical style (i.e.
 777 #       -Olimit 3000).
 778 #CFLAGS = -OPT:Olimit=3000 -O
 779
 780 ### (S) Irix 6.5 with MipsPro C compiler.  Try this as a test to see new
 781 #       compiler features!  Beware, the optimization is EXTREMELY thorough
 782 #       and takes quite a long time.
 783 # Note: See the note above.  Here, the -mips3 option automatically
 784 #       enables either the "n32" or "64" ABI, depending on what machine you
 785 #       are compiling on (n32 is explicitly enabled here, just to make sure).
 786 #CFLAGS = -OPT:Olimit=3500 -O -n32 -mips3 -IPA:aggr_cprop=ON -INLINE:dfe=ON:list=ON:must=screen_char,out_char,ui_write,out_flush
 787 #LDFLAGS= -OPT:Olimit=3500 -O -n32 -mips3 -IPA:aggr_cprop=ON -INLINE:dfe=ON:list=ON:must=screen_char,out_char,ui_write,out_flush
 788
 789 ### (K) for SGI Irix machines with 64 bit pointers ("uname -s" says IRIX64)
 790 ###     Suggested by Jon Wright <jon@gate.sinica.edu.tw>.
 791 ###     Tested on R8000 IRIX6.1 Power Indigo2.
 792 ###     Check /etc/compiler.defaults for your compiler settings.
 793 # either (for 64 bit pointers) uncomment the following line
 794 #GUI_LIB_LOC = -L/usr/lib64
 795 # then
 796 # 1) make config
 797 # 2) edit auto/config.mk and delete the -lelf entry in the LIBS line
 798 # 3) make
 799 #
 800 # or (for 32bit pointers) uncomment the following line
 801 #EXTRA_DEFS = -n32
 802 #GUI_LIB_LOC = -L/usr/lib32
 803 # then
 804 # 1) make config
 805 # 2) edit auto/config.mk, add -n32 to LDFLAGS
 806 # 3) make
 807 #
 808 #Alternatively: use -o32 instead of -n32.
 809 ###
 810
 811 ### (C)  On SCO Unix v3.2.5 (and probably other versions) the termcap library,
 812 ###      which is found by configure, doesn't work correctly.  Symptom is the
 813 ###      error message "Termcap entry too long".  Uncomment the next line.
 814 ###      On AIX 4.2.1 (and other versions probably), libtermcap is reported
 815 ###      not to display properly.
 816 ### after changing this, you need to do "make reconfig".
 817 #CONF_TERM_LIB = --with-tlib=curses
 818
 819 ### (E)  If you want to use termlib library instead of the automatically found
 820 ###      one.  After changing this, you need to do "make reconfig".
 821 #CONF_TERM_LIB = --with-tlib=termlib
 822
 823 ### (a)  ESIX V4.2 (Reinhard Wobst)
 824 #EXTRA_LIBS = -lnsl -lsocket -lgen -lXIM -lXmu -lXext
 825
 826 ### (c)  Tandem/NSK (Matthew Woehlke)
 827 #EXTRA_LIBS = -lfloss
 828
 829 ### If you want to use ncurses library instead of the automatically found one
 830 ### after changing this, you need to do "make reconfig".
 831 #CONF_TERM_LIB = --with-tlib=ncurses
 832
 833 ### For GCC on MSDOS, the ".exe" suffix will be added.
 834 #EXEEXT = .exe
 835 #LNKEXT = .exe
 836
 837 ### (O)  For LynxOS 2.5.0, tested on PC.
 838 #EXTRA_LIBS = -lXext -lSM -lICE -lbsd
 839 ###      For LynxOS 3.0.1, tested on PPC
 840 #EXTRA_LIBS= -lXext -lSM -lICE -lnetinet -lXmu -liberty -lX11
 841 ###      For LynxOS 3.1.0, tested on PC
 842 #EXTRA_LIBS= -lXext -lSM -lICE -lnetinet -lXmu
 843
 844
 845 ### (V)  For CX/UX 6.2  (on Harris/Concurrent NightHawk 4800, 5800). Remove
 846 ###      -Qtarget if only in a 5800 environment.  (Kipp E. Howard)
 847 #CFLAGS = -O -Qtarget=m88110compat
 848 #EXTRA_LIBS = -lgen
 849
 850 ##################### end of system specific lines ################### }}}
 851
 852 ### Names of the programs and targets  {{{1
 853 VIMTARGET       = $(VIMNAME)$(EXEEXT)
 854 EXTARGET        = $(EXNAME)$(LNKEXT)
 855 VIEWTARGET      = $(VIEWNAME)$(LNKEXT)
 856 GVIMNAME        = g$(VIMNAME)
 857 GVIMTARGET      = $(GVIMNAME)$(LNKEXT)
 858 GVIEWNAME       = g$(VIEWNAME)
 859 GVIEWTARGET     = $(GVIEWNAME)$(LNKEXT)
 860 RVIMNAME        = r$(VIMNAME)
 861 RVIMTARGET      = $(RVIMNAME)$(LNKEXT)
 862 RVIEWNAME       = r$(VIEWNAME)
 863 RVIEWTARGET     = $(RVIEWNAME)$(LNKEXT)
 864 RGVIMNAME       = r$(GVIMNAME)
 865 RGVIMTARGET     = $(RGVIMNAME)$(LNKEXT)
 866 RGVIEWNAME      = r$(GVIEWNAME)
 867 RGVIEWTARGET    = $(RGVIEWNAME)$(LNKEXT)
 868 VIMDIFFNAME     = $(VIMNAME)diff
 869 GVIMDIFFNAME    = g$(VIMDIFFNAME)
 870 VIMDIFFTARGET   = $(VIMDIFFNAME)$(LNKEXT)
 871 GVIMDIFFTARGET  = $(GVIMDIFFNAME)$(LNKEXT)
 872 EVIMNAME        = e$(VIMNAME)
 873 EVIMTARGET      = $(EVIMNAME)$(LNKEXT)
 874 EVIEWNAME       = e$(VIEWNAME)
 875 EVIEWTARGET     = $(EVIEWNAME)$(LNKEXT)
 876
 877 ### Names of the tools that are also made  {{{1
 878 TOOLS = xxd/xxd$(EXEEXT)
 879
 880 ### Installation directories.  The defaults come from configure. {{{1
 881 #
 882 ### prefix      the top directory for the data (default "/usr/local")
 883 #
 884 # Uncomment the next line to install Vim in your home directory.
 885 #prefix = $(HOME)
 886
 887 ### exec_prefix is the top directory for the executable (default $(prefix))
 888 #
 889 # Uncomment the next line to install the Vim executable in "/usr/machine/bin"
 890 #exec_prefix = /usr/machine
 891
 892 ### BINDIR      dir for the executable   (default "$(exec_prefix)/bin")
 893 ### MANDIR      dir for the manual pages (default "$(prefix)/man")
 894 ### DATADIR     dir for the other files  (default "$(prefix)/lib" or
 895 #                                                 "$(prefix)/share")
 896 # They may be different when using different architectures for the
 897 # executable and a common directory for the other files.
 898 #
 899 # Uncomment the next line to install Vim in "/usr/bin"
 900 #BINDIR   = /usr/bin
 901 # Uncomment the next line to install Vim manuals in "/usr/share/man/man1"
 902 #MANDIR   = /usr/share/man
 903 # Uncomment the next line to install Vim help files in "/usr/share/vim"
 904 #DATADIR  = /usr/share
 905
 906 ### DESTDIR     root of the installation tree.  This is prepended to the other
 907 #               directories.  This directory must exist.
 908 #DESTDIR  = ~/pkg/vim
 909
 910 ### Directory of the man pages
 911 MAN1DIR = /man1
 912
 913 ### Vim version (adjusted by a script)
 914 VIMMAJOR = 7
 915 VIMMINOR = 2
 916
 917 ### Location of Vim files (should not need to be changed, and  {{{1
 918 ### some things might not work when they are changed!)
 919 VIMDIR = /vim
 920 VIMRTDIR = /vim$(VIMMAJOR)$(VIMMINOR)
 921 HELPSUBDIR = /doc
 922 COLSUBDIR = /colors
 923 SYNSUBDIR = /syntax
 924 INDSUBDIR = /indent
 925 AUTOSUBDIR = /autoload
 926 PLUGSUBDIR = /plugin
 927 FTPLUGSUBDIR = /ftplugin
 928 LANGSUBDIR = /lang
 929 COMPSUBDIR = /compiler
 930 KMAPSUBDIR = /keymap
 931 MACROSUBDIR = /macros
 932 TOOLSSUBDIR = /tools
 933 TUTORSUBDIR = /tutor
 934 SPELLSUBDIR = /spell
 935 PRINTSUBDIR = /print
 936 PODIR = po
 937
 938 ### VIMLOC      common root of the Vim files (all versions)
 939 ### VIMRTLOC    common root of the runtime Vim files (this version)
 940 ### VIMRCLOC    compiled-in location for global [g]vimrc files (all versions)
 941 ### VIMRUNTIMEDIR  compiled-in location for runtime files (optional)
 942 ### HELPSUBLOC  location for help files
 943 ### COLSUBLOC   location for colorscheme files
 944 ### SYNSUBLOC   location for syntax files
 945 ### INDSUBLOC   location for indent files
 946 ### AUTOSUBLOC  location for standard autoload files
 947 ### PLUGSUBLOC  location for standard plugin files
 948 ### FTPLUGSUBLOC  location for ftplugin files
 949 ### LANGSUBLOC  location for language files
 950 ### COMPSUBLOC  location for compiler files
 951 ### KMAPSUBLOC  location for keymap files
 952 ### MACROSUBLOC location for macro files
 953 ### TOOLSSUBLOC location for tools files
 954 ### TUTORSUBLOC location for tutor files
 955 ### SPELLSUBLOC location for spell files
 956 ### PRINTSUBLOC location for PostScript files (prolog, latin1, ..)
 957 ### SCRIPTLOC   location for script files (menu.vim, bugreport.vim, ..)
 958 ### You can override these if you want to install them somewhere else.
 959 ### Edit feature.h for compile-time settings.
 960 VIMLOC          = $(DATADIR)$(VIMDIR)
 961 VIMRTLOC        = $(DATADIR)$(VIMDIR)$(VIMRTDIR)
 962 VIMRCLOC        = $(VIMLOC)
 963 HELPSUBLOC      = $(VIMRTLOC)$(HELPSUBDIR)
 964 COLSUBLOC       = $(VIMRTLOC)$(COLSUBDIR)
 965 SYNSUBLOC       = $(VIMRTLOC)$(SYNSUBDIR)
 966 INDSUBLOC       = $(VIMRTLOC)$(INDSUBDIR)
 967 AUTOSUBLOC      = $(VIMRTLOC)$(AUTOSUBDIR)
 968 PLUGSUBLOC      = $(VIMRTLOC)$(PLUGSUBDIR)
 969 FTPLUGSUBLOC    = $(VIMRTLOC)$(FTPLUGSUBDIR)
 970 LANGSUBLOC      = $(VIMRTLOC)$(LANGSUBDIR)
 971 COMPSUBLOC      = $(VIMRTLOC)$(COMPSUBDIR)
 972 KMAPSUBLOC      = $(VIMRTLOC)$(KMAPSUBDIR)
 973 MACROSUBLOC     = $(VIMRTLOC)$(MACROSUBDIR)
 974 TOOLSSUBLOC     = $(VIMRTLOC)$(TOOLSSUBDIR)
 975 TUTORSUBLOC     = $(VIMRTLOC)$(TUTORSUBDIR)
 976 SPELLSUBLOC     = $(VIMRTLOC)$(SPELLSUBDIR)
 977 PRINTSUBLOC     = $(VIMRTLOC)$(PRINTSUBDIR)
 978 SCRIPTLOC       = $(VIMRTLOC)
 979
 980 ### Only set VIMRUNTIMEDIR when VIMRTLOC is set to a different location and
 981 ### the runtime directory is not below it.
 982 #VIMRUNTIMEDIR = $(VIMRTLOC)
 983
 984 ### Name of the evim file target.
 985 EVIM_FILE       = $(DESTDIR)$(SCRIPTLOC)/evim.vim
 986 MSWIN_FILE      = $(DESTDIR)$(SCRIPTLOC)/mswin.vim
 987
 988 ### Name of the menu file target.
 989 SYS_MENU_FILE   = $(DESTDIR)$(SCRIPTLOC)/menu.vim
 990 SYS_SYNMENU_FILE = $(DESTDIR)$(SCRIPTLOC)/synmenu.vim
 991 SYS_DELMENU_FILE = $(DESTDIR)$(SCRIPTLOC)/delmenu.vim
 992
 993 ### Name of the bugreport file target.
 994 SYS_BUGR_FILE   = $(DESTDIR)$(SCRIPTLOC)/bugreport.vim
 995
 996 ### Name of the file type detection file target.
 997 SYS_FILETYPE_FILE = $(DESTDIR)$(SCRIPTLOC)/filetype.vim
 998
 999 ### Name of the file type detection file target.
1000 SYS_FTOFF_FILE  = $(DESTDIR)$(SCRIPTLOC)/ftoff.vim
1001
1002 ### Name of the file type detection script file target.
1003 SYS_SCRIPTS_FILE = $(DESTDIR)$(SCRIPTLOC)/scripts.vim
1004
1005 ### Name of the ftplugin-on file target.
1006 SYS_FTPLUGIN_FILE = $(DESTDIR)$(SCRIPTLOC)/ftplugin.vim
1007
1008 ### Name of the ftplugin-off file target.
1009 SYS_FTPLUGOF_FILE = $(DESTDIR)$(SCRIPTLOC)/ftplugof.vim
1010
1011 ### Name of the indent-on file target.
1012 SYS_INDENT_FILE = $(DESTDIR)$(SCRIPTLOC)/indent.vim
1013
1014 ### Name of the indent-off file target.
1015 SYS_INDOFF_FILE = $(DESTDIR)$(SCRIPTLOC)/indoff.vim
1016
1017 ### Name of the option window script file target.
1018 SYS_OPTWIN_FILE = $(DESTDIR)$(SCRIPTLOC)/optwin.vim
1019
1020 # Program to install the program in the target directory.  Could also be "mv".
1021 INSTALL_PROG    = cp
1022
1023 # Program to install the data in the target directory.  Cannot be "mv"!
1024 INSTALL_DATA    = cp
1025 INSTALL_DATA_R  = cp -r
1026
1027 ### Program to run on installed binary
1028 #STRIP = strip
1029
1030 ### Permissions for binaries  {{{1
1031 BINMOD = 755
1032
1033 ### Permissions for man page
1034 MANMOD = 644
1035
1036 ### Permissions for help files
1037 HELPMOD = 644
1038
1039 ### Permissions for Perl and shell scripts
1040 SCRIPTMOD = 755
1041
1042 ### Permission for Vim script files (menu.vim, bugreport.vim, ..)
1043 VIMSCRIPTMOD = 644
1044
1045 ### Permissions for all directories that are created
1046 DIRMOD = 755
1047
1048 ### Permissions for all other files that are created
1049 FILEMOD = 644
1050
1051 # Where to copy the man and help files from
1052 HELPSOURCE = ../runtime/doc
1053
1054 # Where to copy the script files from (menu, bugreport)
1055 SCRIPTSOURCE = ../runtime
1056
1057 # Where to copy the colorscheme files from
1058 COLSOURCE = ../runtime/colors
1059
1060 # Where to copy the syntax files from
1061 SYNSOURCE = ../runtime/syntax
1062
1063 # Where to copy the indent files from
1064 INDSOURCE = ../runtime/indent
1065
1066 # Where to copy the standard plugin files from
1067 AUTOSOURCE = ../runtime/autoload
1068
1069 # Where to copy the standard plugin files from
1070 PLUGSOURCE = ../runtime/plugin
1071
1072 # Where to copy the ftplugin files from
1073 FTPLUGSOURCE = ../runtime/ftplugin
1074
1075 # Where to copy the macro files from
1076 MACROSOURCE = ../runtime/macros
1077
1078 # Where to copy the tools files from
1079 TOOLSSOURCE = ../runtime/tools
1080
1081 # Where to copy the tutor files from
1082 TUTORSOURCE = ../runtime/tutor
1083
1084 # Where to copy the spell files from
1085 SPELLSOURCE = ../runtime/spell
1086
1087 # Where to look for language specific files
1088 LANGSOURCE = ../runtime/lang
1089
1090 # Where to look for compiler files
1091 COMPSOURCE = ../runtime/compiler
1092
1093 # Where to look for keymap files
1094 KMAPSOURCE = ../runtime/keymap
1095
1096 # Where to look for print resource files
1097 PRINTSOURCE = ../runtime/print
1098
1099 # If you are using Linux, you might want to use this to make vim the
1100 # default vi editor, it will create a link from vi to Vim when doing
1101 # "make install".  An existing file will be overwritten!
1102 # When not using it, some make programs can't handle an undefined $(LINKIT).
1103 #LINKIT = ln -f -s $(DEST_BIN)/$(VIMTARGET) $(DESTDIR)/usr/bin/vi
1104 LINKIT = @echo >/dev/null
1105
1106 ###
1107 ### GRAPHICAL USER INTERFACE (GUI).  {{{1
1108 ### 'configure --enable-gui' can enable one of these for you if you did set
1109 ### a corresponding CONF_OPT_GUI above and have X11.
1110 ### Override configures choice by uncommenting all the following lines.
1111 ### As they are, the GUI is disabled.  Replace "NONE" with "ATHENA" or "MOTIF"
1112 ### for enabling the Athena or Motif GUI.
1113 #GUI_SRC        = $(NONE_SRC)
1114 #GUI_OBJ        = $(NONE_OBJ)
1115 #GUI_DEFS       = $(NONE_DEFS)
1116 #GUI_IPATH      = $(NONE_IPATH)
1117 #GUI_LIBS_DIR   = $(NONE_LIBS_DIR)
1118 #GUI_LIBS1      = $(NONE_LIBS1)
1119 #GUI_LIBS2      = $(NONE_LIBS2)
1120 #GUI_INSTALL    = $(NONE_INSTALL)
1121 #GUI_TARGETS    = $(NONE_TARGETS)
1122 #GUI_MAN_TARGETS= $(NONE_MAN_TARGETS)
1123 #GUI_TESTTARGET = $(NONE_TESTTARGET)
1124 #GUI_BUNDLE     = $(NONE_BUNDLE)
1125
1126 # Without a GUI install the normal way.
1127 NONE_INSTALL = install_normal
1128
1129 ### GTK GUI
1130 GTK_SRC         = gui.c gui_gtk.c gui_gtk_x11.c pty.c gui_gtk_f.c \
1131                         gui_beval.c
1132 GTK_OBJ         = objects/gui.o objects/gui_gtk.o objects/gui_gtk_x11.o \
1133                         objects/pty.o objects/gui_gtk_f.o \
1134                         objects/gui_beval.o
1135 GTK_DEFS        = -DFEAT_GUI_GTK $(NARROW_PROTO)
1136 GTK_IPATH       = $(GUI_INC_LOC)
1137 GTK_LIBS_DIR    = $(GUI_LIB_LOC)
1138 GTK_LIBS1       =
1139 GTK_LIBS2       = $(GTK_LIBNAME)
1140 GTK_INSTALL     = install_normal install_gui_extra
1141 GTK_TARGETS     = installglinks
1142 GTK_MAN_TARGETS = yes
1143 GTK_TESTTARGET  = gui
1144 GTK_BUNDLE      =
1145
1146 ### Motif GUI
1147 MOTIF_SRC       = gui.c gui_motif.c gui_x11.c pty.c gui_beval.c \
1148                         gui_xmdlg.c gui_xmebw.c
1149 MOTIF_OBJ       = objects/gui.o objects/gui_motif.o objects/gui_x11.o \
1150                         objects/pty.o objects/gui_beval.o \
1151                         objects/gui_xmdlg.o objects/gui_xmebw.o
1152 MOTIF_DEFS      = -DFEAT_GUI_MOTIF $(NARROW_PROTO)
1153 MOTIF_IPATH     = $(GUI_INC_LOC)
1154 MOTIF_LIBS_DIR  = $(GUI_LIB_LOC)
1155 MOTIF_LIBS1     =
1156 MOTIF_LIBS2     = $(MOTIF_LIBNAME) -lXt
1157 MOTIF_INSTALL   = install_normal install_gui_extra
1158 MOTIF_TARGETS   = installglinks
1159 MOTIF_MAN_TARGETS = yes
1160 MOTIF_TESTTARGET = gui
1161 MOTIF_BUNDLE    =
1162
1163 ### Athena GUI
1164 ### Use Xaw3d to make the menus look a little bit nicer
1165 #XAW_LIB = -lXaw3d
1166 XAW_LIB = -lXaw
1167
1168 ### When using Xaw3d, uncomment/comment the following lines to also get the
1169 ### scrollbars from Xaw3d.
1170 #ATHENA_SRC     = gui.c gui_athena.c gui_x11.c pty.c gui_beval.c gui_at_fs.c
1171 #ATHENA_OBJ     = objects/gui.o objects/gui_athena.o objects/gui_x11.o \
1172 #                       objects/pty.o objects/gui_beval.o objects/gui_at_fs.o
1173 #ATHENA_DEFS    = -DFEAT_GUI_ATHENA $(NARROW_PROTO) \
1174 #                   -Dvim_scrollbarWidgetClass=scrollbarWidgetClass \
1175 #                   -Dvim_XawScrollbarSetThumb=XawScrollbarSetThumb
1176 ATHENA_SRC      = gui.c gui_athena.c gui_x11.c pty.c gui_beval.c \
1177                         gui_at_sb.c gui_at_fs.c
1178 ATHENA_OBJ      = objects/gui.o objects/gui_athena.o objects/gui_x11.o \
1179                         objects/pty.o objects/gui_beval.o \
1180                         objects/gui_at_sb.o objects/gui_at_fs.o
1181 ATHENA_DEFS     = -DFEAT_GUI_ATHENA $(NARROW_PROTO)
1182
1183 ATHENA_IPATH    = $(GUI_INC_LOC)
1184 ATHENA_LIBS_DIR = $(GUI_LIB_LOC)
1185 ATHENA_LIBS1    = $(XAW_LIB)
1186 ATHENA_LIBS2    = -lXt
1187 ATHENA_INSTALL  = install_normal install_gui_extra
1188 ATHENA_TARGETS  = installglinks
1189 ATHENA_MAN_TARGETS = yes
1190 ATHENA_TESTTARGET = gui
1191 ATHENA_BUNDLE   =
1192
1193 ### neXtaw GUI
1194 NEXTAW_LIB = -lneXtaw
1195
1196 NEXTAW_SRC      = gui.c gui_athena.c gui_x11.c pty.c gui_beval.c gui_at_fs.c
1197 NEXTAW_OBJ      = objects/gui.o objects/gui_athena.o objects/gui_x11.o \
1198                         objects/pty.o objects/gui_beval.o objects/gui_at_fs.o
1199 NEXTAW_DEFS     = -DFEAT_GUI_ATHENA -DFEAT_GUI_NEXTAW $(NARROW_PROTO)
1200
1201 NEXTAW_IPATH    = $(GUI_INC_LOC)
1202 NEXTAW_LIBS_DIR = $(GUI_LIB_LOC)
1203 NEXTAW_LIBS1    = $(NEXTAW_LIB)
1204 NEXTAW_LIBS2    = -lXt
1205 NEXTAW_INSTALL  =  install_normal install_gui_extra
1206 NEXTAW_TARGETS  =  installglinks
1207 NEXTAW_MAN_TARGETS = yes
1208 NEXTAW_TESTTARGET = gui
1209 NEXTAW_BUNDLE   =
1210
1211 ### (J)  Sun OpenWindows 3.2 (SunOS 4.1.x) or earlier that produce these ld
1212 #        errors:  ld: Undefined symbol
1213 #                     _get_wmShellWidgetClass
1214 #                     _get_applicationShellWidgetClass
1215 # then you need to get patches 100512-02 and 100573-03 from Sun.  In the
1216 # meantime, uncomment the following GUI_X_LIBS definition as a workaround:
1217 #GUI_X_LIBS = -Bstatic -lXmu -Bdynamic -lXext
1218 # If you also get cos, sin etc. as undefined symbols, try uncommenting this
1219 # too:
1220 #EXTRA_LIBS = /usr/openwin/lib/libXmu.sa -lm
1221
1222 # PHOTON GUI
1223 PHOTONGUI_SRC   = gui.c gui_photon.c pty.c
1224 PHOTONGUI_OBJ   = objects/gui.o objects/gui_photon.o objects/pty.o
1225 PHOTONGUI_DEFS  = -DFEAT_GUI_PHOTON
1226 PHOTONGUI_IPATH =
1227 PHOTONGUI_LIBS_DIR =
1228 PHOTONGUI_LIBS1 = -lph -lphexlib
1229 PHOTONGUI_LIBS2 =
1230 PHOTONGUI_INSTALL = install_normal install_gui_extra
1231 PHOTONGUI_TARGETS = installglinks
1232 PHOTONGUI_MAN_TARGETS = yes
1233 PHOTONGUI_TESTTARGET = gui
1234 PHOTONGUI_BUNDLE =
1235
1236 # CARBON GUI
1237 CARBONGUI_SRC   = gui.c gui_mac.c
1238 CARBONGUI_OBJ   = objects/gui.o objects/gui_mac.o objects/pty.o
1239 CARBONGUI_DEFS  = -DFEAT_GUI_MAC -fno-common -fpascal-strings \
1240                   -Wall -Wno-unknown-pragmas \
1241                   -mdynamic-no-pic -pipe
1242 CARBONGUI_IPATH = -I. -Iproto
1243 CARBONGUI_LIBS_DIR =
1244 CARBONGUI_LIBS1 = -framework Carbon
1245 CARBONGUI_LIBS2 =
1246 CARBONGUI_INSTALL = install_macosx
1247 CARBONGUI_TARGETS =
1248 CARBONGUI_MAN_TARGETS =
1249 CARBONGUI_TESTTARGET = gui
1250 CARBONGUI_BUNDLE = gui_bundle
1251 APPDIR = $(VIMNAME).app
1252 CARBONGUI_TESTARG = VIMPROG=../$(APPDIR)/Contents/MacOS/$(VIMTARGET)
1253
1254 # MACVIM GUI
1255 MACVIMGUI_SRC   = gui.c MacVim/gui_macvim.m MacVim/MMBackend.m \
1256                   MacVim/MacVim.m
1257 MACVIMGUI_OBJ   = objects/gui.o objects/pty.o objects/gui_macvim.o \
1258                   objects/MMBackend.o objects/MacVim.o
1259 MACVIMGUI_DEFS  = -DFEAT_GUI_MACVIM -Wall -Wno-unknown-pragmas -pipe
1260 MACVIMGUI_IPATH =
1261 MACVIMGUI_LIBS_DIR =
1262 MACVIMGUI_LIBS1 = -framework Cocoa -framework Carbon
1263 MACVIMGUI_LIBS2 =
1264 MACVIMGUI_INSTALL = install_normal
1265 MACVIMGUI_TARGETS =
1266 MACVIMGUI_MAN_TARGETS =
1267 MACVIMGUI_TESTTARGET = gui
1268 MACVIMGUI_BUNDLE = macvim
1269
1270 # All GUI files
1271 ALL_GUI_SRC  = gui.c gui_gtk.c gui_gtk_f.c gui_motif.c gui_xmdlg.c gui_xmebw.c gui_athena.c gui_gtk_x11.c gui_x11.c gui_at_sb.c gui_at_fs.c pty.c
1272 ALL_GUI_PRO  = gui.pro gui_gtk.pro gui_motif.pro gui_xmdlg.pro gui_athena.pro gui_gtk_x11.pro gui_x11.pro gui_w16.pro gui_w32.pro gui_photon.pro
1273
1274 # }}}
1275
1276 ### Command to create dependencies based on #include "..."
1277 ### prototype headers are ignored due to -DPROTO, system
1278 ### headers #include <...> are ignored if we use the -MM option, as
1279 ### e.g. provided by gcc-cpp.
1280 ### Include FEAT_GUI to get gependency on gui.h
1281 ### Need to change "-I /<path>" to "-isystem /<path>" for GCC 3.x.
1282 CPP_DEPEND = $(CC) -I$(srcdir) -M$(CPP_MM) \
1283                 `echo "$(DEPEND_CFLAGS)" $(DEPEND_CFLAGS_FILTER)`
1284
1285 # flags for cproto
1286 #     This is for cproto 3 patchlevel 8 or below
1287 #     __inline, __attribute__ and __extension__ are not recognized by cproto
1288 #     G_IMPLEMENT_INLINES is to avoid functions defined in glib/gutils.h.
1289 #NO_ATTR = -D__inline= -D__inline__= -DG_IMPLEMENT_INLINES \
1290 #         -D"__attribute__\\(x\\)=" -D"__asm__\\(x\\)=" \
1291 #         -D__extension__= -D__restrict="" \
1292 #         -D__gnuc_va_list=char -D__builtin_va_list=char
1293
1294 #
1295 #     This is for cproto 3 patchlevel 9 or above (currently 4.6, 4.7g)
1296 #     __inline and __attribute__ are now recognized by cproto
1297 #     -D"foo()=" is not supported by all compilers so do not use it
1298 NO_ATTR=
1299 #
1300 #     maybe the "/usr/bin/cc -E" has to be adjusted for some systems
1301 # This is for cproto 3.5 patchlevel 3:
1302 # PROTO_FLAGS = -f4 -m__ARGS -d -E"$(CPP)" $(NO_ATTR)
1303 #
1304 # Use this for cproto 3 patchlevel 6 or below (use "cproto -V" to check):
1305 # PROTO_FLAGS = -f4 -m__ARGS -d -E"$(CPP)" $(NO_ATTR)
1306 #
1307 # Use this for cproto 3 patchlevel 7 or above (use "cproto -V" to check):
1308 PROTO_FLAGS = -m -M__ARGS -d -E"$(CPP)" $(NO_ATTR)
1309
1310
1311 ################################################
1312 ##   no changes required below this line      ##
1313 ################################################
1314
1315 SHELL = /bin/sh
1316
1317 .SUFFIXES:
1318 .SUFFIXES: .c .o .pro
1319
1320 PRE_DEFS = -Iproto $(DEFS) $(GUI_DEFS) $(GUI_IPATH) $(CPPFLAGS) $(EXTRA_IPATHS)
1321 POST_DEFS = $(X_CFLAGS) $(MZSCHEME_CFLAGS) $(PERL_CFLAGS) $(PYTHON_CFLAGS) $(TCL_CFLAGS) $(RUBY_CFLAGS) $(EXTRA_DEFS)
1322
1323 ALL_CFLAGS = $(PRE_DEFS) $(CFLAGS) $(PROFILE_CFLAGS) $(POST_DEFS)
1324
1325 # Exclude $CFLAGS for osdef.sh, for Mac 10.4 some flags don't work together
1326 # with "-E".
1327 OSDEF_CFLAGS = $(PRE_DEFS) $(POST_DEFS)
1328
1329 LINT_CFLAGS = -DLINT -I. $(PRE_DEFS) $(POST_DEFS) -Dinline= -D__extension__= -Dalloca=alloca
1330
1331 LINT_EXTRA = -DUSE_SNIFF -DHANGUL_INPUT -D"__attribute__(x)="
1332
1333 DEPEND_CFLAGS = -DPROTO -DDEPEND -DFEAT_GUI $(LINT_CFLAGS)
1334
1335 # If you have problems with flags that cproto doesn't support, and you are
1336 # using GNU make, you can try using the other line to filter out arguments.
1337 #PFLAGS = $(PROTO_FLAGS) -DPROTO $(filter -D% -I%, $(LINT_CFLAGS))
1338 PFLAGS = $(PROTO_FLAGS) -DPROTO $(LINT_CFLAGS)
1339
1340 ALL_LIB_DIRS = $(GUI_LIBS_DIR) $(X_LIBS_DIR)
1341 ALL_LIBS = $(GUI_LIBS1) $(GUI_X_LIBS) $(GUI_LIBS2) $(X_PRE_LIBS) $(X_LIBS) $(X_EXTRA_LIBS) $(LIBS) $(EXTRA_LIBS) $(MZSCHEME_LIBS) $(PERL_LIBS) $(PYTHON_LIBS) $(TCL_LIBS) $(RUBY_LIBS) $(PROFILE_LIBS)
1342
1343 # abbreviations
1344 DEST_BIN = $(DESTDIR)$(BINDIR)
1345 DEST_VIM = $(DESTDIR)$(VIMLOC)
1346 DEST_RT = $(DESTDIR)$(VIMRTLOC)
1347 DEST_HELP = $(DESTDIR)$(HELPSUBLOC)
1348 DEST_COL = $(DESTDIR)$(COLSUBLOC)
1349 DEST_SYN = $(DESTDIR)$(SYNSUBLOC)
1350 DEST_IND = $(DESTDIR)$(INDSUBLOC)
1351 DEST_AUTO = $(DESTDIR)$(AUTOSUBLOC)
1352 DEST_PLUG = $(DESTDIR)$(PLUGSUBLOC)
1353 DEST_FTP = $(DESTDIR)$(FTPLUGSUBLOC)
1354 DEST_LANG = $(DESTDIR)$(LANGSUBLOC)
1355 DEST_COMP = $(DESTDIR)$(COMPSUBLOC)
1356 DEST_KMAP = $(DESTDIR)$(KMAPSUBLOC)
1357 DEST_MACRO = $(DESTDIR)$(MACROSUBLOC)
1358 DEST_TOOLS = $(DESTDIR)$(TOOLSSUBLOC)
1359 DEST_TUTOR = $(DESTDIR)$(TUTORSUBLOC)
1360 DEST_SPELL = $(DESTDIR)$(SPELLSUBLOC)
1361 DEST_SCRIPT = $(DESTDIR)$(SCRIPTLOC)
1362 DEST_PRINT = $(DESTDIR)$(PRINTSUBLOC)
1363 DEST_MAN_TOP = $(DESTDIR)$(MANDIR)
1364
1365 # We assume that the ".../man/xx/man1/" directory is for latin1 manual pages.
1366 # Some systems use UTF-8, but these should find the ".../man/xx.UTF-8/man1/"
1367 # directory first.
1368 # FreeBSD uses ".../man/xx.ISO8859-1/man1" for latin1, use that one too.
1369 DEST_MAN = $(DEST_MAN_TOP)$(MAN1DIR)
1370 DEST_MAN_FR = $(DEST_MAN_TOP)/fr$(MAN1DIR)
1371 DEST_MAN_FR_I = $(DEST_MAN_TOP)/fr.ISO8859-1$(MAN1DIR)
1372 DEST_MAN_FR_U = $(DEST_MAN_TOP)/fr.UTF-8$(MAN1DIR)
1373 DEST_MAN_IT = $(DEST_MAN_TOP)/it$(MAN1DIR)
1374 DEST_MAN_IT_I = $(DEST_MAN_TOP)/it.ISO8859-1$(MAN1DIR)
1375 DEST_MAN_IT_U = $(DEST_MAN_TOP)/it.UTF-8$(MAN1DIR)
1376 DEST_MAN_PL = $(DEST_MAN_TOP)/pl$(MAN1DIR)
1377 DEST_MAN_PL_I = $(DEST_MAN_TOP)/pl.ISO8859-2$(MAN1DIR)
1378 DEST_MAN_PL_U = $(DEST_MAN_TOP)/pl.UTF-8$(MAN1DIR)
1379 DEST_MAN_RU = $(DEST_MAN_TOP)/ru.KOI8-R$(MAN1DIR)
1380 DEST_MAN_RU_U = $(DEST_MAN_TOP)/ru.UTF-8$(MAN1DIR)
1381
1382 #            BASIC_SRC: files that are always used
1383 #              GUI_SRC: extra GUI files for current configuration
1384 #          ALL_GUI_SRC: all GUI files for Unix
1385 #
1386 #                  SRC: files used for current configuration
1387 #             TAGS_SRC: source files used for make tags
1388 #            TAGS_INCL: include files used for make tags
1389 #              ALL_SRC: source files used for make depend and make lint
1390
1391 TAGS_INCL = *.h
1392
1393 BASIC_SRC = \
1394         buffer.c \
1395         charset.c \
1396         diff.c \
1397         digraph.c \
1398         edit.c \
1399         eval.c \
1400         ex_cmds.c \
1401         ex_cmds2.c \
1402         ex_docmd.c \
1403         ex_eval.c \
1404         ex_getln.c \
1405         fileio.c \
1406         fold.c \
1407         getchar.c \
1408         hardcopy.c \
1409         hashtab.c \
1410         if_cscope.c \
1411         if_xcmdsrv.c \
1412         main.c \
1413         mark.c \
1414         memfile.c \
1415         memline.c \
1416         menu.c \
1417         message.c \
1418         misc1.c \
1419         misc2.c \
1420         move.c \
1421         mbyte.c \
1422         normal.c \
1423         ops.c \
1424         option.c \
1425         os_unix.c \
1426         auto/pathdef.c \
1427         popupmnu.c \
1428         quickfix.c \
1429         regexp.c \
1430         screen.c \
1431         search.c \
1432         spell.c \
1433         syntax.c \
1434         tag.c \
1435         term.c \
1436         ui.c \
1437         undo.c \
1438         version.c \
1439         window.c \
1440         $(OS_EXTRA_SRC)
1441
1442 SRC =   $(BASIC_SRC) $(GUI_SRC) $(HANGULIN_SRC) $(MZSCHEME_SRC) \
1443         $(PERL_SRC) $(PYTHON_SRC) $(TCL_SRC) $(RUBY_SRC) \
1444         $(SNIFF_SRC) $(WORKSHOP_SRC) $(WSDEBUG_SRC)
1445
1446 TAGS_SRC = *.c *.cpp if_perl.xs
1447
1448 EXTRA_SRC = hangulin.c if_mzsch.c auto/if_perl.c if_perlsfio.c \
1449             if_python.c if_tcl.c if_ruby.c if_sniff.c gui_beval.c \
1450             workshop.c wsdebug.c integration.c netbeans.c
1451
1452 # All sources, also the ones that are not configured
1453 ALL_SRC = $(BASIC_SRC) $(ALL_GUI_SRC) $(EXTRA_SRC)
1454
1455 # Which files to check with lint.  Select one of these three lines.  ALL_SRC
1456 # checks more, but may not work well for checking a GUI that wasn't configured.
1457 # The perl sources also don't work well with lint.
1458 LINT_SRC = $(BASIC_SRC) $(GUI_SRC) $(HANGULIN_SRC) $(PYTHON_SRC) $(TCL_SRC) \
1459         $(SNIFF_SRC) $(WORKSHOP_SRC) $(WSDEBUG_SRC) $(NETBEANS_SRC)
1460 #LINT_SRC = $(SRC)
1461 #LINT_SRC = $(ALL_SRC)
1462 #LINT_SRC = $(BASIC_SRC)
1463
1464 OBJ = \
1465         objects/buffer.o \
1466         objects/charset.o \
1467         objects/diff.o \
1468         objects/digraph.o \
1469         objects/edit.o \
1470         objects/eval.o \
1471         objects/ex_cmds.o \
1472         objects/ex_cmds2.o \
1473         objects/ex_docmd.o \
1474         objects/ex_eval.o \
1475         objects/ex_getln.o \
1476         objects/fileio.o \
1477         objects/fold.o \
1478         objects/getchar.o \
1479         objects/hardcopy.o \
1480         objects/hashtab.o \
1481         $(HANGULIN_OBJ) \
1482         objects/if_cscope.o \
1483         objects/if_xcmdsrv.o \
1484         objects/main.o \
1485         objects/mark.o \
1486         objects/memfile.o \
1487         objects/memline.o \
1488         objects/menu.o \
1489         objects/message.o \
1490         objects/misc1.o \
1491         objects/misc2.o \
1492         objects/move.o \
1493         objects/mbyte.o \
1494         objects/normal.o \
1495         objects/ops.o \
1496         objects/option.o \
1497         objects/os_unix.o \
1498         objects/pathdef.o \
1499         objects/popupmnu.o \
1500         objects/quickfix.o \
1501         objects/regexp.o \
1502         objects/screen.o \
1503         objects/search.o \
1504         objects/spell.o \
1505         objects/syntax.o \
1506         $(SNIFF_OBJ) \
1507         objects/tag.o \
1508         objects/term.o \
1509         objects/ui.o \
1510         objects/undo.o \
1511         objects/window.o \
1512         $(GUI_OBJ) \
1513         $(MZSCHEME_OBJ) \
1514         $(PERL_OBJ) \
1515         $(PYTHON_OBJ) \
1516         $(TCL_OBJ) \
1517         $(RUBY_OBJ) \
1518         $(OS_EXTRA_OBJ) \
1519         $(WORKSHOP_OBJ) \
1520         $(NETBEANS_OBJ) \
1521         $(WSDEBUG_OBJ)
1522
1523 PRO_AUTO = \
1524         buffer.pro \
1525         charset.pro \
1526         diff.pro \
1527         digraph.pro \
1528         edit.pro \
1529         eval.pro \
1530         ex_cmds.pro \
1531         ex_cmds2.pro \
1532         ex_docmd.pro \
1533         ex_eval.pro \
1534         ex_getln.pro \
1535         fileio.pro \
1536         fold.pro \
1537         getchar.pro \
1538         hardcopy.pro \
1539         hashtab.pro \
1540         hangulin.pro \
1541         if_cscope.pro \
1542         if_xcmdsrv.pro \
1543         if_python.pro \
1544         if_ruby.pro \
1545         main.pro \
1546         mark.pro \
1547         memfile.pro \
1548         memline.pro \
1549         menu.pro \
1550         message.pro \
1551         misc1.pro \
1552         misc2.pro \
1553         move.pro \
1554         mbyte.pro \
1555         normal.pro \
1556         ops.pro \
1557         option.pro \
1558         os_unix.pro \
1559         popupmnu.pro \
1560         quickfix.pro \
1561         regexp.pro \
1562         screen.pro \
1563         search.pro \
1564         spell.pro \
1565         syntax.pro \
1566         tag.pro \
1567         term.pro \
1568         termlib.pro \
1569         ui.pro \
1570         undo.pro \
1571         version.pro \
1572         window.pro \
1573         gui_beval.pro \
1574         workshop.pro \
1575         netbeans.pro \
1576         $(ALL_GUI_PRO) \
1577         $(TCL_PRO)
1578
1579 # Resources used for the Mac are in one directory.
1580 RSRC_DIR = os_mac_rsrc
1581
1582 PRO_MANUAL = os_amiga.pro os_msdos.pro os_win16.pro os_win32.pro \
1583         os_mswin.pro os_beos.pro os_vms.pro os_riscos.pro $(PERL_PRO)
1584
1585 # Default target is making the executable and tools
1586 all: $(VIMTARGET) $(TOOLS) languages $(GUI_BUNDLE)
1587
1588 tools: $(TOOLS)
1589
1590 # Run configure with all the setting from above.
1591 #
1592 # Note: auto/config.h doesn't depend on configure, because running configure
1593 # doesn't always update auto/config.h.  The timestamp isn't changed if the
1594 # file contents didn't change (to avoid recompiling everything).  Including a
1595 # dependency on auto/config.h would cause running configure each time when
1596 # auto/config.h isn't updated.  The dependency on auto/config.mk should make
1597 # sure configure is run when it's needed.
1598 #
1599 config auto/config.mk: auto/configure config.mk.in config.h.in
1600         GUI_INC_LOC="$(GUI_INC_LOC)" GUI_LIB_LOC="$(GUI_LIB_LOC)" \
1601                 CC="$(CC)" CPPFLAGS="$(CPPFLAGS)" CFLAGS="$(CFLAGS)" \
1602                 LDFLAGS="$(LDFLAGS)" $(CONF_SHELL) srcdir="$(srcdir)" \
1603                 ./configure $(CONF_OPT_GUI) $(CONF_OPT_X) $(CONF_OPT_XSMP) \
1604                 $(CONF_OPT_DARWIN) $(CONF_OPT_PERL) $(CONF_OPT_PYTHON) \
1605                 $(CONF_OPT_TCL) $(CONF_OPT_RUBY) $(CONF_OPT_NLS) \
1606                 $(CONF_OPT_CSCOPE) $(CONF_OPT_MULTIBYTE) $(CONF_OPT_INPUT) \
1607                 $(CONF_OPT_OUTPUT) $(CONF_OPT_GPM) $(CONF_OPT_WORKSHOP) \
1608                 $(CONF_OPT_SNIFF) $(CONF_OPT_FEAT) $(CONF_TERM_LIB) \
1609                 $(CONF_OPT_COMPBY) $(CONF_OPT_ACL)  $(CONF_OPT_NETBEANS) \
1610                 $(CONF_ARGS) $(CONF_OPT_MZSCHEME) $(CONF_OPT_PLTHOME) \
1611                 $(CONF_OPT_SYSMOUSE)
1612
1613 # Use "make reconfig" to rerun configure without cached values.
1614 # When config.h changes, most things will be recompiled automatically.
1615 # Invoke $(MAKE) to run config with the empty auto/config.mk.
1616 # Invoke $(MAKE) to build all with the filled auto/config.mk.
1617 reconfig: scratch clean
1618         $(MAKE) -f Makefile config
1619         $(MAKE) -f Makefile all
1620
1621 # Run autoconf to produce auto/configure.
1622 # Note:
1623 # - DO NOT RUN autoconf MANUALLY!  It will overwrite ./configure instead of
1624 #   producing auto/configure.
1625 # - autoconf is not run automatically, because a patch usually changes both
1626 #   configure.in and auto/configure but can't update the timestamps.  People
1627 #   who do not have (the correct version of) autoconf would run into trouble.
1628 #
1629 # Two tricks are required to make autoconf put its output in the "auto" dir:
1630 # - Temporarily move the ./configure script to ./configure.save.  Don't
1631 #   overwrite it, it's probably the result of an aborted autoconf.
1632 # - Use sed to change ./config.log to auto/config.log in the configure script.
1633 # Autoconf 2.5x (2.59 at least) produces a few more files that we need to take
1634 # care of:
1635 # - configure.lineno: has the line numbers replaced with $LINENO.  That
1636 #   improves patches a LOT, thus use it instead (until someone says it doesn't
1637 #   work on some system).
1638 # - autom4te.cache directory is created and not cleaned up.  Delete it.
1639 # - Uses ">config.log" instead of "./config.log".
1640 autoconf:
1641         if test ! -f configure.save; then mv configure configure.save; fi
1642         autoconf
1643         sed -e 's+>config.log+>auto/config.log+' -e 's+\./config.log+auto/config.log+' configure > auto/configure
1644         chmod 755 auto/configure
1645         mv -f configure.save configure
1646         -rm -rf autom4te.cache
1647         -rm -f auto/config.status auto/config.cache
1648
1649 # Re-execute this Makefile to include the new auto/config.mk produced by
1650 # configure Only used when typing "make" with a fresh auto/config.mk.
1651 myself:
1652         $(MAKE) -f Makefile all
1653
1654
1655 # The normal command to compile a .c file to its .o file.
1656 CCC = $(CC) -c -I$(srcdir) $(ALL_CFLAGS)
1657
1658
1659 # Link the target for normal use or debugging.
1660 # A shell script is used to try linking without unneccesary libraries.
1661 $(VIMTARGET): auto/config.mk objects $(OBJ) version.c version.h
1662         $(CCC) version.c -o objects/version.o
1663         @LINK="$(PURIFY) $(SHRPENV) $(CClink) $(ALL_LIB_DIRS) $(LDFLAGS) \
1664                 -o $(VIMTARGET) $(OBJ) objects/version.o $(ALL_LIBS)" \
1665                 MAKE="$(MAKE)" sh $(srcdir)/link.sh
1666
1667 xxd/xxd$(EXEEXT): xxd/xxd.c
1668         cd xxd; CC="$(CC)" CFLAGS="$(CPPFLAGS) $(CFLAGS)" \
1669                 $(MAKE) -f Makefile
1670
1671 # Build the language specific files if they were unpacked.
1672 # Generate the converted .mo files separately, it's no problem if this fails.
1673 languages:
1674         @if test -n "$(MAKEMO)" -a -f $(PODIR)/Makefile; then \
1675                 cd $(PODIR); \
1676                 CC="$(CC)" $(MAKE) prefix=$(DESTDIR)$(prefix); \
1677         fi
1678         -@if test -n "$(MAKEMO)" -a -f $(PODIR)/Makefile; then \
1679                 cd $(PODIR); CC="$(CC)" $(MAKE) prefix=$(DESTDIR)$(prefix) converted; \
1680         fi
1681
1682 # Update the *.po files for changes in the sources.  Only run manually.
1683 update-po:
1684         cd $(PODIR); CC="$(CC)" $(MAKE) prefix=$(DESTDIR)$(prefix) update-po
1685
1686 # Generate function prototypes.  This is not needed to compile vim, but if
1687 # you want to use it, cproto is out there on the net somewhere -- Webb
1688 #
1689 # When generating os_amiga.pro, os_msdos.pro and os_win32.pro there will be a
1690 # few include files that can not be found, that's OK.
1691
1692 proto: $(PRO_AUTO) $(PRO_MANUAL)
1693
1694 ### Would be nice if this would work for "normal" make.
1695 ### Currently it only works for (Free)BSD make.
1696 #$(PRO_AUTO): $$(*F).c
1697 #       cproto $(PFLAGS) -DFEAT_GUI $(*F).c > $@
1698
1699 # Always define FEAT_GUI.  This may generate a few warnings if it's also
1700 # defined in auto/config.h, you can ignore that.
1701 .c.pro:
1702         cproto $(PFLAGS) -DFEAT_GUI $< > proto/$@
1703         echo "/* vim: set ft=c : */" >> proto/$@
1704
1705 os_amiga.pro: os_amiga.c
1706         cproto $(PFLAGS) -DAMIGA -UHAVE_CONFIG_H -DBPTR=char* $< > proto/$@
1707         echo "/* vim: set ft=c : */" >> proto/$@
1708
1709 os_msdos.pro: os_msdos.c
1710         cproto $(PFLAGS) -DMSDOS -UHAVE_CONFIG_H $< > proto/$@
1711         echo "/* vim: set ft=c : */" >> proto/$@
1712
1713 os_win16.pro: os_win16.c
1714         cproto $(PFLAGS) -DWIN16 -UHAVE_CONFIG_H $< > proto/$@
1715         echo "/* vim: set ft=c : */" >> proto/$@
1716
1717 os_win32.pro: os_win32.c
1718         cproto $(PFLAGS) -DWIN32 -UHAVE_CONFIG_H $< > proto/$@
1719         echo "/* vim: set ft=c : */" >> proto/$@
1720
1721 os_mswin.pro: os_mswin.c
1722         cproto $(PFLAGS) -DWIN16 -DWIN32 -UHAVE_CONFIG_H $< > proto/$@
1723         echo "/* vim: set ft=c : */" >> proto/$@
1724
1725 os_beos.pro: os_beos.c
1726         cproto $(PFLAGS) -D__BEOS__ -UHAVE_CONFIG_H $< > proto/$@
1727         echo "/* vim: set ft=c : */" >> proto/$@
1728
1729 os_vms.pro: os_vms.c
1730 # must use os_vms_conf.h for auto/config.h
1731         mv auto/config.h auto/config.h.save
1732         cp os_vms_conf.h auto/config.h
1733         cproto $(PFLAGS) -DVMS -UFEAT_GUI_ATHENA -UFEAT_GUI_NEXTAW -UFEAT_GUI_MOTIF -UFEAT_GUI_GTK $< > proto/$@
1734         echo "/* vim: set ft=c : */" >> proto/$@
1735         rm auto/config.h
1736         mv auto/config.h.save auto/config.h
1737
1738 # if_perl.pro is special: Use the generated if_perl.c for input and remove
1739 # prototypes for local functions.
1740 if_perl.pro: auto/if_perl.c
1741         cproto $(PFLAGS) -DFEAT_GUI auto/if_perl.c | sed "/_VI/d" > proto/$@
1742
1743
1744 notags:
1745         -rm -f tags
1746
1747 # Note: tags is made for the currently configured version, can't include both
1748 #       Motif and Athena GUI
1749 # You can ignore error messages for missing files.
1750 tags TAGS: notags
1751         $(TAGPRG) $(TAGS_SRC) $(TAGS_INCL)
1752
1753 # Make a highlight file for types.  Requires Exuberant ctags and awk
1754 types: types.vim
1755 types.vim: $(TAGS_SRC) $(TAGS_INCL)
1756         ctags --c-kinds=gstu -o- $(TAGS_SRC) $(TAGS_INCL) |\
1757                 awk 'BEGIN{printf("syntax keyword Type\t")}\
1758                         {printf("%s ", $$1)}END{print ""}' > $@
1759
1760 # Execute the test scripts.  Run these after compiling Vim, before installing.
1761 # This doesn't depend on $(VIMTARGET), because that won't work when configure
1762 # wasn't run yet.  Restart make to build it instead.
1763 #
1764 # This will produce a lot of garbage on your screen, including a few error
1765 # messages.  Don't worry about that.
1766 # If there is a real error, there will be a difference between "test.out" and
1767 # a "test99.ok" file.
1768 # If everything is alright, the final message will be "ALL DONE".  If not you
1769 # get "TEST FAILURE".
1770 #
1771 test check:
1772         $(MAKE) -f Makefile $(VIMTARGET)
1773         -if test -n "$(MAKEMO)" -a -f $(PODIR)/Makefile; then \
1774                 cd $(PODIR); $(MAKE) -f Makefile check VIM=../$(VIMTARGET); \
1775         fi
1776         -if test $(VIMTARGET) != vim -a ! -r vim; then \
1777                 ln -s $(VIMTARGET) vim; \
1778         fi
1779         cd testdir; $(MAKE) -f Makefile $(GUI_TESTTARGET) VIMPROG=../$(VIMTARGET) $(GUI_TESTARG)
1780
1781 testclean:
1782         cd testdir; $(MAKE) -f Makefile clean
1783         if test -d $(PODIR); then \
1784                 cd $(PODIR); $(MAKE) checkclean; \
1785         fi
1786
1787 install: $(GUI_INSTALL)
1788
1789 install_normal: installvim installtools $(INSTALL_LANGS) install-icons
1790
1791 install_gui_extra: installgtutorbin
1792
1793 installvim: installvimbin installtutorbin \
1794                 installruntime installlinks installmanlinks
1795
1796 #
1797 # Avoid overwriting an existing executable, somebody might be running it and
1798 # overwriting it could cause it to crash.  Deleting it is OK, it won't be
1799 # really deleted until all running processes for it have exited.  It is
1800 # renamed first, in case the deleting doesn't work.
1801 #
1802 # If you want to keep an older version, rename it before running "make
1803 # install".
1804 #
1805 installvimbin: $(VIMTARGET) $(DESTDIR)$(exec_prefix) $(DEST_BIN)
1806         -if test -f $(DEST_BIN)/$(VIMTARGET); then \
1807           mv -f $(DEST_BIN)/$(VIMTARGET) $(DEST_BIN)/$(VIMNAME).rm; \
1808           rm -f $(DEST_BIN)/$(VIMNAME).rm; \
1809         fi
1810         $(INSTALL_PROG) $(VIMTARGET) $(DEST_BIN)
1811         $(STRIP) $(DEST_BIN)/$(VIMTARGET)
1812         chmod $(BINMOD) $(DEST_BIN)/$(VIMTARGET)
1813 # may create a link to the new executable from /usr/bin/vi
1814         -$(LINKIT)
1815
1816 # Long list of arguments for the shell script that installs the manual pages
1817 # for one language.
1818 INSTALLMANARGS = $(VIMLOC) $(SCRIPTLOC) $(VIMRCLOC) $(HELPSOURCE) $(MANMOD) \
1819                 $(VIMNAME) $(VIMDIFFNAME) $(EVIMNAME)
1820
1821 # Install most of the runtime files
1822 installruntime: installrtbase installmacros installtutor installspell
1823
1824 # install the help files; first adjust the contents for the final location
1825 installrtbase: $(HELPSOURCE)/vim.1 $(DEST_VIM) $(DEST_RT) \
1826                 $(DEST_HELP) $(DEST_PRINT) $(DEST_COL) $(DEST_SYN) $(DEST_IND) \
1827                 $(DEST_FTP) $(DEST_AUTO) $(DEST_AUTO)/xml $(DEST_PLUG) \
1828                 $(DEST_TUTOR) $(DEST_SPELL) $(DEST_COMP)
1829         -$(SHELL) ./installman.sh install $(DEST_MAN) "" $(INSTALLMANARGS)
1830         @echo generating help tags
1831 # Generate the help tags with ":helptags" to handle all languages.
1832         -@cd $(HELPSOURCE); $(MAKE) VIMEXE=$(DEST_BIN)/$(VIMTARGET) vimtags
1833         cd $(HELPSOURCE); \
1834                 files=`ls *.txt tags`; \
1835                 files="$$files `ls *.??x tags-?? 2>/dev/null || true`"; \
1836                 $(INSTALL_DATA) $$files  $(DEST_HELP); \
1837                 cd $(DEST_HELP); \
1838                 chmod $(HELPMOD) $$files
1839         $(INSTALL_DATA)  $(HELPSOURCE)/*.pl $(DEST_HELP)
1840         chmod $(SCRIPTMOD) $(DEST_HELP)/*.pl
1841 # install the menu files
1842         $(INSTALL_DATA) $(SCRIPTSOURCE)/menu.vim $(SYS_MENU_FILE)
1843         chmod $(VIMSCRIPTMOD) $(SYS_MENU_FILE)
1844         $(INSTALL_DATA) $(SCRIPTSOURCE)/synmenu.vim $(SYS_SYNMENU_FILE)
1845         chmod $(VIMSCRIPTMOD) $(SYS_SYNMENU_FILE)
1846         $(INSTALL_DATA) $(SCRIPTSOURCE)/delmenu.vim $(SYS_DELMENU_FILE)
1847         chmod $(VIMSCRIPTMOD) $(SYS_DELMENU_FILE)
1848 # install the evim file
1849         $(INSTALL_DATA) $(SCRIPTSOURCE)/mswin.vim $(MSWIN_FILE)
1850         chmod $(VIMSCRIPTMOD) $(MSWIN_FILE)
1851         $(INSTALL_DATA) $(SCRIPTSOURCE)/evim.vim $(EVIM_FILE)
1852         chmod $(VIMSCRIPTMOD) $(EVIM_FILE)
1853 # install the bugreport file
1854         $(INSTALL_DATA) $(SCRIPTSOURCE)/bugreport.vim $(SYS_BUGR_FILE)
1855         chmod $(VIMSCRIPTMOD) $(SYS_BUGR_FILE)
1856 # install the example vimrc files
1857         $(INSTALL_DATA) $(SCRIPTSOURCE)/vimrc_example.vim $(DEST_SCRIPT)
1858         chmod $(VIMSCRIPTMOD) $(DEST_SCRIPT)/vimrc_example.vim
1859         $(INSTALL_DATA) $(SCRIPTSOURCE)/gvimrc_example.vim $(DEST_SCRIPT)
1860         chmod $(VIMSCRIPTMOD) $(DEST_SCRIPT)/gvimrc_example.vim
1861 # install the file type detection files
1862         $(INSTALL_DATA) $(SCRIPTSOURCE)/filetype.vim $(SYS_FILETYPE_FILE)
1863         chmod $(VIMSCRIPTMOD) $(SYS_FILETYPE_FILE)
1864         $(INSTALL_DATA) $(SCRIPTSOURCE)/ftoff.vim $(SYS_FTOFF_FILE)
1865         chmod $(VIMSCRIPTMOD) $(SYS_FTOFF_FILE)
1866         $(INSTALL_DATA) $(SCRIPTSOURCE)/scripts.vim $(SYS_SCRIPTS_FILE)
1867         chmod $(VIMSCRIPTMOD) $(SYS_SCRIPTS_FILE)
1868         $(INSTALL_DATA) $(SCRIPTSOURCE)/ftplugin.vim $(SYS_FTPLUGIN_FILE)
1869         chmod $(VIMSCRIPTMOD) $(SYS_FTPLUGIN_FILE)
1870         $(INSTALL_DATA) $(SCRIPTSOURCE)/ftplugof.vim $(SYS_FTPLUGOF_FILE)
1871         chmod $(VIMSCRIPTMOD) $(SYS_FTPLUGOF_FILE)
1872         $(INSTALL_DATA) $(SCRIPTSOURCE)/indent.vim $(SYS_INDENT_FILE)
1873         chmod $(VIMSCRIPTMOD) $(SYS_INDENT_FILE)
1874         $(INSTALL_DATA) $(SCRIPTSOURCE)/indoff.vim $(SYS_INDOFF_FILE)
1875         chmod $(VIMSCRIPTMOD) $(SYS_INDOFF_FILE)
1876         $(INSTALL_DATA) $(SCRIPTSOURCE)/optwin.vim $(SYS_OPTWIN_FILE)
1877         chmod $(VIMSCRIPTMOD) $(SYS_OPTWIN_FILE)
1878 # install the print resource files
1879         cd $(PRINTSOURCE); $(INSTALL_DATA) *.ps $(DEST_PRINT)
1880         cd $(DEST_PRINT); chmod $(FILEMOD) *.ps
1881 # install the colorscheme files
1882         cd $(COLSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_COL)
1883         cd $(DEST_COL); chmod $(HELPMOD) *.vim README.txt
1884 # install the syntax files
1885         cd $(SYNSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_SYN)
1886         cd $(DEST_SYN); chmod $(HELPMOD) *.vim README.txt
1887 # install the indent files
1888         cd $(INDSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_IND)
1889         cd $(DEST_IND); chmod $(HELPMOD) *.vim README.txt
1890 # install the standard autoload files
1891         cd $(AUTOSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_AUTO)
1892         cd $(DEST_AUTO); chmod $(HELPMOD) *.vim README.txt
1893         cd $(AUTOSOURCE)/xml; $(INSTALL_DATA) *.vim $(DEST_AUTO)/xml
1894         cd $(DEST_AUTO)/xml; chmod $(HELPMOD) *.vim
1895 # install the standard plugin files
1896         cd $(PLUGSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_PLUG)
1897         cd $(DEST_PLUG); chmod $(HELPMOD) *.vim README.txt
1898 # install the ftplugin files
1899         cd $(FTPLUGSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_FTP)
1900         cd $(DEST_FTP); chmod $(HELPMOD) *.vim README.txt
1901 # install the compiler files
1902         cd $(COMPSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_COMP)
1903         cd $(DEST_COMP); chmod $(HELPMOD) *.vim README.txt
1904
1905 installmacros: $(DEST_VIM) $(DEST_RT) $(DEST_MACRO)
1906         $(INSTALL_DATA_R) $(MACROSOURCE)/* $(DEST_MACRO)
1907         chmod $(DIRMOD) `find $(DEST_MACRO) -type d -print`
1908         chmod $(FILEMOD) `find $(DEST_MACRO) -type f -print`
1909         chmod $(SCRIPTMOD) $(DEST_MACRO)/less.sh
1910 # When using CVS some CVS directories might have been copied.
1911         cvs=`find $(DEST_MACRO) \( -name CVS -o -name AAPDIR \) -print`; \
1912               if test -n "$$cvs"; then \
1913                  rm -rf $$cvs; \
1914               fi
1915
1916 # install the tutor files
1917 installtutorbin: $(DEST_VIM)
1918         $(INSTALL_DATA) vimtutor $(DEST_BIN)/$(VIMNAME)tutor
1919         chmod $(SCRIPTMOD) $(DEST_BIN)/$(VIMNAME)tutor
1920
1921 installgtutorbin: $(DEST_VIM)
1922         $(INSTALL_DATA) gvimtutor $(DEST_BIN)/$(GVIMNAME)tutor
1923         chmod $(SCRIPTMOD) $(DEST_BIN)/$(GVIMNAME)tutor
1924
1925 installtutor: $(DEST_RT) $(DEST_TUTOR)
1926         -$(INSTALL_DATA) $(TUTORSOURCE)/README* $(TUTORSOURCE)/tutor* $(DEST_TUTOR)
1927         chmod $(HELPMOD) $(DEST_TUTOR)/*
1928
1929 # Install the spell files, if they exist.  This assumes at least the English
1930 # spell file is there.
1931 installspell: $(DEST_VIM) $(DEST_RT) $(DEST_SPELL)
1932         if test -f $(SPELLSOURCE)/en.latin1.spl; then \
1933           $(INSTALL_DATA) $(SPELLSOURCE)/*.spl $(SPELLSOURCE)/*.sug $(SPELLSOURCE)/*.vim $(DEST_SPELL); \
1934           chmod $(HELPMOD) $(DEST_SPELL)/*.spl $(DEST_SPELL)/*.sug $(DEST_SPELL)/*.vim; \
1935         fi
1936
1937 # install helper program xxd
1938 installtools: $(TOOLS) $(DESTDIR)$(exec_prefix) $(DEST_BIN) \
1939                 $(TOOLSSOURCE) $(DEST_VIM) $(DEST_RT) $(DEST_TOOLS) \
1940                 $(INSTALL_TOOL_LANGS)
1941         if test -f $(DEST_BIN)/xxd$(EXEEXT); then \
1942           mv -f $(DEST_BIN)/xxd$(EXEEXT) $(DEST_BIN)/xxd.rm; \
1943           rm -f $(DEST_BIN)/xxd.rm; \
1944         fi
1945         $(INSTALL_PROG) xxd/xxd$(EXEEXT) $(DEST_BIN)
1946         $(STRIP) $(DEST_BIN)/xxd$(EXEEXT)
1947         chmod $(BINMOD) $(DEST_BIN)/xxd$(EXEEXT)
1948         -$(SHELL) ./installman.sh xxd $(DEST_MAN) "" $(INSTALLMANARGS)
1949
1950 # install the runtime tools
1951         $(INSTALL_DATA_R) $(TOOLSSOURCE)/* $(DEST_TOOLS)
1952 # When using CVS some CVS directories might have been copied.
1953         cvs=`find $(DEST_TOOLS) \( -name CVS -o -name AAPDIR \) -print`; \
1954               if test -n "$$cvs"; then \
1955                  rm -rf $$cvs; \
1956               fi
1957         -chmod $(FILEMOD) $(DEST_TOOLS)/*
1958 # replace the path in some tools
1959         perlpath=`./which.sh perl` && sed -e "s+/usr/bin/perl+$$perlpath+" $(TOOLSSOURCE)/efm_perl.pl >$(DEST_TOOLS)/efm_perl.pl
1960         awkpath=`./which.sh nawk` && sed -e "s+/usr/bin/nawk+$$awkpath+" $(TOOLSSOURCE)/mve.awk >$(DEST_TOOLS)/mve.awk; if test -z "$$awkpath"; then \
1961                 awkpath=`./which.sh gawk` && sed -e "s+/usr/bin/nawk+$$awkpath+" $(TOOLSSOURCE)/mve.awk >$(DEST_TOOLS)/mve.awk; if test -z "$$awkpath"; then \
1962                 awkpath=`./which.sh awk` && sed -e "s+/usr/bin/nawk+$$awkpath+" $(TOOLSSOURCE)/mve.awk >$(DEST_TOOLS)/mve.awk; fi; fi
1963         -chmod $(SCRIPTMOD) `grep -l "^#!" $(DEST_TOOLS)/*`
1964
1965 # install the language specific files for tools, if they were unpacked
1966 install-tool-languages:
1967         -$(SHELL) ./installman.sh xxd $(DEST_MAN_FR) "-fr" $(INSTALLMANARGS)
1968         -$(SHELL) ./installman.sh xxd $(DEST_MAN_FR_I) "-fr" $(INSTALLMANARGS)
1969         -$(SHELL) ./installman.sh xxd $(DEST_MAN_FR_U) "-fr.UTF-8" $(INSTALLMANARGS)
1970         -$(SHELL) ./installman.sh xxd $(DEST_MAN_IT) "-it" $(INSTALLMANARGS)
1971         -$(SHELL) ./installman.sh xxd $(DEST_MAN_IT_I) "-it" $(INSTALLMANARGS)
1972         -$(SHELL) ./installman.sh xxd $(DEST_MAN_IT_U) "-it.UTF-8" $(INSTALLMANARGS)
1973         -$(SHELL) ./installman.sh xxd $(DEST_MAN_PL) "-pl" $(INSTALLMANARGS)
1974         -$(SHELL) ./installman.sh xxd $(DEST_MAN_PL_I) "-pl" $(INSTALLMANARGS)
1975         -$(SHELL) ./installman.sh xxd $(DEST_MAN_PL_U) "-pl.UTF-8" $(INSTALLMANARGS)
1976         -$(SHELL) ./installman.sh xxd $(DEST_MAN_RU) "-ru" $(INSTALLMANARGS)
1977         -$(SHELL) ./installman.sh xxd $(DEST_MAN_RU_U) "-ru.UTF-8" $(INSTALLMANARGS)
1978
1979 # install the language specific files, if they were unpacked
1980 install-languages: languages $(DEST_LANG) $(DEST_KMAP)
1981         -$(SHELL) ./installman.sh install $(DEST_MAN_FR) "-fr" $(INSTALLMANARGS)
1982         -$(SHELL) ./installman.sh install $(DEST_MAN_FR_I) "-fr" $(INSTALLMANARGS)
1983         -$(SHELL) ./installman.sh install $(DEST_MAN_FR_U) "-fr.UTF-8" $(INSTALLMANARGS)
1984         -$(SHELL) ./installman.sh install $(DEST_MAN_IT) "-it" $(INSTALLMANARGS)
1985         -$(SHELL) ./installman.sh install $(DEST_MAN_IT_I) "-it" $(INSTALLMANARGS)
1986         -$(SHELL) ./installman.sh install $(DEST_MAN_IT_U) "-it.UTF-8" $(INSTALLMANARGS)
1987         -$(SHELL) ./installman.sh install $(DEST_MAN_PL) "-pl" $(INSTALLMANARGS)
1988         -$(SHELL) ./installman.sh install $(DEST_MAN_PL_I) "-pl" $(INSTALLMANARGS)
1989         -$(SHELL) ./installman.sh install $(DEST_MAN_PL_U) "-pl.UTF-8" $(INSTALLMANARGS)
1990         -$(SHELL) ./installman.sh install $(DEST_MAN_RU) "-ru" $(INSTALLMANARGS)
1991         -$(SHELL) ./installman.sh install $(DEST_MAN_RU_U) "-ru.UTF-8" $(INSTALLMANARGS)
1992         -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \
1993                 $(DEST_MAN_FR) $(INSTALLMLARGS)
1994         -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \
1995                 $(DEST_MAN_FR_I) $(INSTALLMLARGS)
1996         -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \
1997                 $(DEST_MAN_FR_U) $(INSTALLMLARGS)
1998         -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \
1999                 $(DEST_MAN_IT) $(INSTALLMLARGS)
2000         -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \
2001                 $(DEST_MAN_IT_I) $(INSTALLMLARGS)
2002         -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \
2003                 $(DEST_MAN_IT_U) $(INSTALLMLARGS)
2004         -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \
2005                 $(DEST_MAN_PL) $(INSTALLMLARGS)
2006         -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \
2007                 $(DEST_MAN_PL_I) $(INSTALLMLARGS)
2008         -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \
2009                 $(DEST_MAN_PL_U) $(INSTALLMLARGS)
2010         -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \
2011                 $(DEST_MAN_RU) $(INSTALLMLARGS)
2012         -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \
2013                 $(DEST_MAN_RU_U) $(INSTALLMLARGS)
2014         if test -n "$(MAKEMO)" -a -f $(PODIR)/Makefile; then \
2015            cd $(PODIR); $(MAKE) prefix=$(DESTDIR)$(prefix) LOCALEDIR=$(DEST_LANG) \
2016            INSTALL_DATA=$(INSTALL_DATA) FILEMOD=$(FILEMOD) install; \
2017         fi
2018         if test -d $(LANGSOURCE); then \
2019            $(INSTALL_DATA) $(LANGSOURCE)/README.txt $(LANGSOURCE)/*.vim $(DEST_LANG); \
2020            chmod $(FILEMOD) $(DEST_LANG)/README.txt $(DEST_LANG)/*.vim; \
2021         fi
2022         if test -d $(KMAPSOURCE); then \
2023            $(INSTALL_DATA) $(KMAPSOURCE)/README.txt $(KMAPSOURCE)/*.vim $(DEST_KMAP); \
2024            chmod $(FILEMOD) $(DEST_KMAP)/README.txt $(DEST_KMAP)/*.vim; \
2025         fi
2026
2027 # install the icons for KDE, if the directory exists and the icon doesn't.
2028 ICON48PATH = $(DESTDIR)$(DATADIR)/icons/hicolor/48x48/apps
2029 ICON32PATH = $(DESTDIR)$(DATADIR)/icons/locolor/32x32/apps
2030 ICON16PATH = $(DESTDIR)$(DATADIR)/icons/locolor/16x16/apps
2031 KDEPATH = $(HOME)/.kde/share/icons
2032 install-icons:
2033         if test -d $(ICON48PATH) -a -w $(ICON48PATH) \
2034                 -a ! -f $(ICON48PATH)/gvim.png; then \
2035            $(INSTALL_DATA) $(SCRIPTSOURCE)/vim48x48.png $(ICON48PATH)/gvim.png; \
2036         fi
2037         if test -d $(ICON32PATH) -a -w $(ICON32PATH) \
2038                 -a ! -f $(ICON32PATH)/gvim.png; then \
2039            $(INSTALL_DATA) $(SCRIPTSOURCE)/vim32x32.png $(ICON32PATH)/gvim.png; \
2040         fi
2041         if test -d $(ICON16PATH) -a -w $(ICON16PATH) \
2042                 -a ! -f $(ICON16PATH)/gvim.png; then \
2043            $(INSTALL_DATA) $(SCRIPTSOURCE)/vim16x16.png $(ICON16PATH)/gvim.png; \
2044         fi
2045
2046
2047 $(HELPSOURCE)/vim.1 $(MACROSOURCE) $(TOOLSSOURCE):
2048         @echo Runtime files not found.
2049         @echo You need to unpack the runtime archive before running "make install".
2050         test -f error
2051
2052 $(DESTDIR)$(exec_prefix) $(DEST_BIN) \
2053                 $(DEST_VIM) $(DEST_RT) $(DEST_HELP) \
2054                 $(DEST_PRINT) $(DEST_COL) $(DEST_SYN) $(DEST_IND) $(DEST_FTP) \
2055                 $(DEST_LANG) $(DEST_KMAP) $(DEST_COMP) \
2056                 $(DEST_MACRO) $(DEST_TOOLS) $(DEST_TUTOR) $(DEST_SPELL) \
2057                 $(DEST_AUTO) $(DEST_AUTO)/xml $(DEST_PLUG):
2058         -$(SHELL) ./mkinstalldirs $@
2059         -chmod $(DIRMOD) $@
2060
2061 # create links from various names to vim.  This is only done when the links
2062 # (or executables with the same name) don't exist yet.
2063 installlinks: $(GUI_TARGETS) \
2064                         $(DEST_BIN)/$(EXTARGET) \
2065                         $(DEST_BIN)/$(VIEWTARGET) \
2066                         $(DEST_BIN)/$(RVIMTARGET) \
2067                         $(DEST_BIN)/$(RVIEWTARGET) \
2068                         $(INSTALLVIMDIFF)
2069
2070 installglinks: $(DEST_BIN)/$(GVIMTARGET) \
2071                         $(DEST_BIN)/$(GVIEWTARGET) \
2072                         $(DEST_BIN)/$(RGVIMTARGET) \
2073                         $(DEST_BIN)/$(RGVIEWTARGET) \
2074                         $(DEST_BIN)/$(EVIMTARGET) \
2075                         $(DEST_BIN)/$(EVIEWTARGET) \
2076                         $(INSTALLGVIMDIFF)
2077
2078 installvimdiff: $(DEST_BIN)/$(VIMDIFFTARGET)
2079 installgvimdiff: $(DEST_BIN)/$(GVIMDIFFTARGET)
2080
2081 $(DEST_BIN)/$(EXTARGET):
2082         cd $(DEST_BIN); ln -s $(VIMTARGET) $(EXTARGET)
2083
2084 $(DEST_BIN)/$(VIEWTARGET):
2085         cd $(DEST_BIN); ln -s $(VIMTARGET) $(VIEWTARGET)
2086
2087 $(DEST_BIN)/$(GVIMTARGET):
2088         cd $(DEST_BIN); ln -s $(VIMTARGET) $(GVIMTARGET)
2089
2090 $(DEST_BIN)/$(GVIEWTARGET):
2091         cd $(DEST_BIN); ln -s $(VIMTARGET) $(GVIEWTARGET)
2092
2093 $(DEST_BIN)/$(RVIMTARGET):
2094         cd $(DEST_BIN); ln -s $(VIMTARGET) $(RVIMTARGET)
2095
2096 $(DEST_BIN)/$(RVIEWTARGET):
2097         cd $(DEST_BIN); ln -s $(VIMTARGET) $(RVIEWTARGET)
2098
2099 $(DEST_BIN)/$(RGVIMTARGET):
2100         cd $(DEST_BIN); ln -s $(VIMTARGET) $(RGVIMTARGET)
2101
2102 $(DEST_BIN)/$(RGVIEWTARGET):
2103         cd $(DEST_BIN); ln -s $(VIMTARGET) $(RGVIEWTARGET)
2104
2105 $(DEST_BIN)/$(VIMDIFFTARGET):
2106         cd $(DEST_BIN); ln -s $(VIMTARGET) $(VIMDIFFTARGET)
2107
2108 $(DEST_BIN)/$(GVIMDIFFTARGET):
2109         cd $(DEST_BIN); ln -s $(VIMTARGET) $(GVIMDIFFTARGET)
2110
2111 $(DEST_BIN)/$(EVIMTARGET):
2112         cd $(DEST_BIN); ln -s $(VIMTARGET) $(EVIMTARGET)
2113
2114 $(DEST_BIN)/$(EVIEWTARGET):
2115         cd $(DEST_BIN); ln -s $(VIMTARGET) $(EVIEWTARGET)
2116
2117 # Create links for the manual pages with various names to vim.  This is only
2118 # done when the links (or manpages with the same name) don't exist yet.
2119
2120 INSTALLMLARGS = $(VIMNAME) $(VIMDIFFNAME) $(EVIMNAME) \
2121                 $(EXNAME) $(VIEWNAME) $(RVIMNAME) $(RVIEWNAME) \
2122                 $(GVIMNAME) $(GVIEWNAME) $(RGVIMNAME) $(RGVIEWNAME) \
2123                 $(GVIMDIFFNAME) $(EVIEWNAME)
2124
2125 installmanlinks:
2126         -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \
2127                 $(DEST_MAN) $(INSTALLMLARGS)
2128
2129 uninstall: uninstall_runtime
2130         -rm -f $(DEST_BIN)/$(VIMTARGET)
2131         -rm -f $(DEST_BIN)/vimtutor
2132         -rm -f $(DEST_BIN)/gvimtutor
2133         -rm -f $(DEST_BIN)/$(EXTARGET) $(DEST_BIN)/$(VIEWTARGET)
2134         -rm -f $(DEST_BIN)/$(GVIMTARGET) $(DEST_BIN)/$(GVIEWTARGET)
2135         -rm -f $(DEST_BIN)/$(RVIMTARGET) $(DEST_BIN)/$(RVIEWTARGET)
2136         -rm -f $(DEST_BIN)/$(RGVIMTARGET) $(DEST_BIN)/$(RGVIEWTARGET)
2137         -rm -f $(DEST_BIN)/$(VIMDIFFTARGET) $(DEST_BIN)/$(GVIMDIFFTARGET)
2138         -rm -f $(DEST_BIN)/$(EVIMTARGET) $(DEST_BIN)/$(EVIEWTARGET)
2139         -rm -f $(DEST_BIN)/xxd$(EXEEXT)
2140
2141 # Note: the "rmdir" will fail if any files were added after "make install"
2142 uninstall_runtime:
2143         -$(SHELL) ./installman.sh uninstall $(DEST_MAN) "" $(INSTALLMANARGS)
2144         -$(SHELL) ./installman.sh uninstall $(DEST_MAN_FR) "" $(INSTALLMANARGS)
2145         -$(SHELL) ./installman.sh uninstall $(DEST_MAN_FR_I) "" $(INSTALLMANARGS)
2146         -$(SHELL) ./installman.sh uninstall $(DEST_MAN_FR_U) "" $(INSTALLMANARGS)
2147         -$(SHELL) ./installman.sh uninstall $(DEST_MAN_IT) "" $(INSTALLMANARGS)
2148         -$(SHELL) ./installman.sh uninstall $(DEST_MAN_IT_I) "" $(INSTALLMANARGS)
2149         -$(SHELL) ./installman.sh uninstall $(DEST_MAN_IT_U) "" $(INSTALLMANARGS)
2150         -$(SHELL) ./installman.sh uninstall $(DEST_MAN_PL) "" $(INSTALLMANARGS)
2151         -$(SHELL) ./installman.sh uninstall $(DEST_MAN_PL_I) "" $(INSTALLMANARGS)
2152         -$(SHELL) ./installman.sh uninstall $(DEST_MAN_PL_U) "" $(INSTALLMANARGS)
2153         -$(SHELL) ./installman.sh uninstall $(DEST_MAN_RU) "" $(INSTALLMANARGS)
2154         -$(SHELL) ./installman.sh uninstall $(DEST_MAN_RU_U) "" $(INSTALLMANARGS)
2155         -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \
2156                 $(DEST_MAN) $(INSTALLMLARGS)
2157         -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \
2158                 $(DEST_MAN_FR) $(INSTALLMLARGS)
2159         -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \
2160                 $(DEST_MAN_FR_I) $(INSTALLMLARGS)
2161         -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \
2162                 $(DEST_MAN_FR_U) $(INSTALLMLARGS)
2163         -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \
2164                 $(DEST_MAN_IT) $(INSTALLMLARGS)
2165         -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \
2166                 $(DEST_MAN_IT_I) $(INSTALLMLARGS)
2167         -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \
2168                 $(DEST_MAN_IT_U) $(INSTALLMLARGS)
2169         -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \
2170                 $(DEST_MAN_PL) $(INSTALLMLARGS)
2171         -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \
2172                 $(DEST_MAN_PL_I) $(INSTALLMLARGS)
2173         -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \
2174                 $(DEST_MAN_PL_U) $(INSTALLMLARGS)
2175         -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \
2176                 $(DEST_MAN_RU) $(INSTALLMLARGS)
2177         -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \
2178                 $(DEST_MAN_RU_U) $(INSTALLMLARGS)
2179         -rm -f $(DEST_MAN)/xxd.1
2180         -rm -f $(DEST_MAN_FR)/xxd.1 $(DEST_MAN_FR_I)/xxd.1 $(DEST_MAN_FR_U)/xxd.1
2181         -rm -f $(DEST_MAN_IT)/xxd.1 $(DEST_MAN_IT_I)/xxd.1 $(DEST_MAN_IT_U)/xxd.1
2182         -rm -f $(DEST_MAN_PL)/xxd.1 $(DEST_MAN_PL_I)/xxd.1 $(DEST_MAN_PL_U)/xxd.1
2183         -rm -f $(DEST_MAN_RU)/xxd.1 $(DEST_MAN_RU_U)/xxd.1
2184         -rm -f $(DEST_HELP)/*.txt $(DEST_HELP)/tags $(DEST_HELP)/*.pl
2185         -rm -f $(DEST_HELP)/*.??x $(DEST_HELP)/tags-??
2186         -rm -f $(SYS_MENU_FILE) $(SYS_SYNMENU_FILE) $(SYS_DELMENU_FILE)
2187         -rm -f $(SYS_BUGR_FILE) $(EVIM_FILE) $(MSWIN_FILE)
2188         -rm -f $(DEST_SCRIPT)/gvimrc_example.vim $(DEST_SCRIPT)/vimrc_example.vim
2189         -rm -f $(SYS_FILETYPE_FILE) $(SYS_FTOFF_FILE) $(SYS_SCRIPTS_FILE)
2190         -rm -f $(SYS_INDOFF_FILE) $(SYS_INDENT_FILE)
2191         -rm -f $(SYS_FTPLUGOF_FILE) $(SYS_FTPLUGIN_FILE)
2192         -rm -f $(SYS_OPTWIN_FILE)
2193         -rm -f $(DEST_COL)/*.vim $(DEST_COL)/README.txt
2194         -rm -f $(DEST_SYN)/*.vim $(DEST_SYN)/README.txt
2195         -rm -f $(DEST_IND)/*.vim $(DEST_IND)/README.txt
2196         -rm -rf $(DEST_MACRO)
2197         -rm -rf $(DEST_TUTOR)
2198         -rm -rf $(DEST_SPELL)
2199         -rm -rf $(DEST_TOOLS)
2200         -rm -rf $(DEST_LANG)
2201         -rm -rf $(DEST_KMAP)
2202         -rm -rf $(DEST_COMP)
2203         -rm -f $(DEST_PRINT)/*.ps
2204         -rmdir $(DEST_HELP) $(DEST_PRINT) $(DEST_COL) $(DEST_SYN) $(DEST_IND)
2205         -rm -rf $(DEST_FTP)/*.vim $(DEST_FTP)/README.txt
2206         -rm -f $(DEST_AUTO)/*.vim $(DEST_AUTO)/README.txt $(DEST_AUTO)/xml/*.vim
2207         -rm -f $(DEST_PLUG)/*.vim $(DEST_PLUG)/README.txt
2208         -rmdir $(DEST_FTP) $(DEST_AUTO)/xml $(DEST_AUTO) $(DEST_PLUG) $(DEST_RT)
2209 #       This will fail when other Vim versions are installed, no worries.
2210         -rmdir $(DEST_VIM)
2211
2212 # Clean up all the files that have been produced, except configure's.
2213 # We support common typing mistakes for Juergen! :-)
2214 clean celan: testclean macvimclean
2215         -rm -f *.o objects/* core $(VIMTARGET).core $(VIMTARGET) vim xxd/*.o
2216         -rm -f $(TOOLS) auto/osdef.h auto/pathdef.c auto/if_perl.c
2217         -rm -f conftest* *~ auto/link.sed
2218         -rm -rf $(APPDIR)
2219         -rm -rf mzscheme_base.c
2220         if test -d $(PODIR); then \
2221                 cd $(PODIR); $(MAKE) prefix=$(DESTDIR)$(prefix) clean; \
2222         fi
2223
2224 # Make a shadow directory for compilation on another system or with different
2225 # features.
2226 SHADOWDIR = shadow
2227
2228 shadow: runtime pixmaps
2229         mkdir $(SHADOWDIR)
2230         cd $(SHADOWDIR); ln -s ../*.[ch] ../*.in ../*.sh ../*.xs ../*.xbm ../toolcheck ../proto ../po ../vimtutor ../gvimtutor ../mkinstalldirs .
2231         mkdir $(SHADOWDIR)/auto
2232         cd $(SHADOWDIR)/auto; ln -s ../../auto/configure .
2233         cd $(SHADOWDIR); rm -f auto/link.sed
2234         cp Makefile configure $(SHADOWDIR)
2235         rm -f $(SHADOWDIR)/auto/config.mk $(SHADOWDIR)/config.mk.dist
2236         cp config.mk.dist $(SHADOWDIR)/auto/config.mk
2237         cp config.mk.dist $(SHADOWDIR)
2238         mkdir $(SHADOWDIR)/xxd
2239         cd $(SHADOWDIR)/xxd; ln -s ../../xxd/*.[ch] ../../xxd/Make* .
2240         if test -d $(RSRC_DIR); then \
2241                 cd $(SHADOWDIR); \
2242                 ln -s ../infplist.xml .; \
2243                 ln -s ../$(RSRC_DIR) ../os_mac.rsr.hqx ../dehqx.py .; \
2244         fi
2245         mkdir $(SHADOWDIR)/testdir
2246         cd $(SHADOWDIR)/testdir; ln -s ../../testdir/Makefile \
2247                                  ../../testdir/vimrc.unix \
2248                                  ../../testdir/*.in \
2249                                  ../../testdir/*.vim \
2250                                  ../../testdir/*.ok .
2251
2252 # Link needed for doing "make install" in a shadow directory.
2253 runtime:
2254         -ln -s ../runtime .
2255
2256 # Link needed for doing "make" using GTK in a shadow directory.
2257 pixmaps:
2258         -ln -s ../pixmaps .
2259
2260 # Update the synmenu.vim file with the latest Syntax menu.
2261 # This is only needed when runtime/makemenu.vim was changed.
2262 menu: ./vim ../runtime/makemenu.vim
2263         ./vim -u ../runtime/makemenu.vim
2264
2265 # Start configure from scratch
2266 scrub scratch:
2267         -rm -f auto/config.status auto/config.cache config.log auto/config.log
2268         -rm -f auto/config.h auto/link.log auto/link.sed auto/config.mk
2269         touch auto/config.h
2270         cp config.mk.dist auto/config.mk
2271
2272 distclean: clean scratch
2273         -rm -f tags
2274
2275 dist: distclean
2276         @echo
2277         @echo Making the distribution has to be done in the top directory
2278
2279 mdepend:
2280         -@rm -f Makefile~
2281         cp Makefile Makefile~
2282         sed -e '/\#\#\# Dependencies/q' < Makefile > tmp_make
2283         @for i in $(ALL_SRC) ; do \
2284           echo "$$i" ; \
2285           echo `echo "$$i" | sed -e 's/[^ ]*\.c$$/objects\/\1.o/'`": $$i" `\
2286             $(CPP) $$i |\
2287             grep '^# .*"\./.*\.h"' |\
2288             sort -t'"' -u +1 -2 |\
2289             sed -e 's/.*"\.\/\(.*\)".*/\1/'\
2290             ` >> tmp_make ; \
2291         done
2292         mv tmp_make Makefile
2293
2294 depend:
2295         -@rm -f Makefile~
2296         cp Makefile Makefile~
2297         sed -e '/\#\#\# Dependencies/q' < Makefile > tmp_make
2298         -for i in $(ALL_SRC); do echo $$i; \
2299                 $(CPP_DEPEND) $$i | \
2300                 sed -e 's+^\([^ ]*\.o\)+objects/\1+' >> tmp_make; done
2301         mv tmp_make Makefile
2302
2303 # Run lint.  Clean up the *.ln files that are sometimes left behind.
2304 lint:
2305         $(LINT) $(LINT_OPTIONS) $(LINT_CFLAGS) $(LINT_EXTRA) $(LINT_SRC)
2306         -rm -f *.ln
2307
2308 # Check dosinst.c with lint.
2309 lintinstall:
2310         $(LINT) $(LINT_OPTIONS) -DWIN32 -DUNIX_LINT dosinst.c
2311         -rm -f dosinst.ln
2312
2313 ###########################################################################
2314
2315 .c.o:
2316         $(CCC) $<
2317
2318 auto/if_perl.c: if_perl.xs
2319         $(PERL) -e 'unless ( $$] >= 5.005 ) { for (qw(na defgv errgv)) { print "#define PL_$$_ $$_\n" }}' > $@
2320         $(PERL) $(PERLLIB)/ExtUtils/xsubpp -prototypes -typemap \
2321             $(PERLLIB)/ExtUtils/typemap if_perl.xs >> $@
2322
2323 auto/osdef.h: auto/config.h osdef.sh osdef1.h.in osdef2.h.in
2324         CC="$(CC) $(OSDEF_CFLAGS)" srcdir=$(srcdir) sh $(srcdir)/osdef.sh
2325
2326 QUOTESED = sed -e 's/[\\"]/\\&/g' -e 's/\\"/"/' -e 's/\\";$$/";/'
2327 auto/pathdef.c: Makefile auto/config.mk
2328         -@echo creating $@
2329         -@echo '/* pathdef.c */' > $@
2330         -@echo '/* This file is automatically created by Makefile' >> $@
2331         -@echo ' * DO NOT EDIT!  Change Makefile only. */' >> $@
2332         -@echo '#include "vim.h"' >> $@
2333         -@echo 'char_u *default_vim_dir = (char_u *)"$(VIMRCLOC)";' | $(QUOTESED) >> $@
2334         -@echo 'char_u *default_vimruntime_dir = (char_u *)"$(VIMRUNTIMEDIR)";' | $(QUOTESED) >> $@
2335         -@echo 'char_u *all_cflags = (char_u *)"$(CC) -c -I$(srcdir) $(ALL_CFLAGS)";' | $(QUOTESED) >>  $@
2336         -@echo 'char_u *all_lflags = (char_u *)"$(CC) $(ALL_LIB_DIRS) $(LDFLAGS) -o $(VIMTARGET) $(ALL_LIBS) ";' | $(QUOTESED) >>  $@
2337         -@echo 'char_u *compiled_user = (char_u *)"' | tr -d $(NL) >> $@
2338         -@if test -n "$(COMPILEDBY)"; then \
2339                 echo "$(COMPILEDBY)" | tr -d $(NL) >> $@; \
2340                 else ((logname) 2>/dev/null || whoami) | tr -d $(NL) >> $@; fi
2341         -@echo '";' >> $@
2342         -@echo 'char_u *compiled_sys = (char_u *)"' | tr -d $(NL) >> $@
2343         -@if test -z "$(COMPILEDBY)"; then hostname | tr -d $(NL) >> $@; fi
2344         -@echo '";' >> $@
2345         -@sh $(srcdir)/pathdef.sh
2346
2347 # All the object files are put in the "objects" directory.  Since not all make
2348 # commands understand putting object files in another directory, it must be
2349 # specified for each file separately.
2350
2351 objects:
2352         mkdir objects
2353
2354 objects/MMBackend.o: MacVim/MMBackend.m
2355         $(CCC) -fobjc-exceptions -o $@ MacVim/MMBackend.m
2356
2357 objects/MacVim.o: MacVim/MacVim.m
2358         $(CCC) -o $@ MacVim/MacVim.m
2359
2360 objects/buffer.o: buffer.c
2361         $(CCC) -o $@ buffer.c
2362
2363 objects/charset.o: charset.c
2364         $(CCC) -o $@ charset.c
2365
2366 objects/diff.o: diff.c
2367         $(CCC) -o $@ diff.c
2368
2369 objects/digraph.o: digraph.c
2370         $(CCC) -o $@ digraph.c
2371
2372 objects/edit.o: edit.c
2373         $(CCC) -o $@ edit.c
2374
2375 objects/eval.o: eval.c
2376         $(CCC) -o $@ eval.c
2377
2378 objects/ex_cmds.o: ex_cmds.c
2379         $(CCC) -o $@ ex_cmds.c
2380
2381 objects/ex_cmds2.o: ex_cmds2.c
2382         $(CCC) -o $@ ex_cmds2.c
2383
2384 objects/ex_docmd.o: ex_docmd.c
2385         $(CCC) -o $@ ex_docmd.c
2386
2387 objects/ex_eval.o: ex_eval.c
2388         $(CCC) -o $@ ex_eval.c
2389
2390 objects/ex_getln.o: ex_getln.c
2391         $(CCC) -o $@ ex_getln.c
2392
2393 objects/fileio.o: fileio.c
2394         $(CCC) -o $@ fileio.c
2395
2396 objects/fold.o: fold.c
2397         $(CCC) -o $@ fold.c
2398
2399 objects/getchar.o: getchar.c
2400         $(CCC) -o $@ getchar.c
2401
2402 objects/hardcopy.o: hardcopy.c
2403         $(CCC) -o $@ hardcopy.c
2404
2405 objects/hashtab.o: hashtab.c
2406         $(CCC) -o $@ hashtab.c
2407
2408 objects/gui.o: gui.c
2409         $(CCC) -o $@ gui.c
2410
2411 objects/gui_at_fs.o: gui_at_fs.c
2412         $(CCC) -o $@ gui_at_fs.c
2413
2414 objects/gui_at_sb.o: gui_at_sb.c
2415         $(CCC) -o $@ gui_at_sb.c
2416
2417 objects/gui_athena.o: gui_athena.c
2418         $(CCC) -o $@ gui_athena.c
2419
2420 objects/gui_beval.o: gui_beval.c
2421         $(CCC) -o $@ gui_beval.c
2422
2423 objects/gui_gtk.o: gui_gtk.c
2424         $(CCC) -o $@ gui_gtk.c
2425
2426 objects/gui_gtk_f.o: gui_gtk_f.c
2427         $(CCC) -o $@ gui_gtk_f.c
2428
2429 objects/gui_gtk_x11.o: gui_gtk_x11.c
2430         $(CCC) -o $@ gui_gtk_x11.c
2431
2432 objects/gui_motif.o: gui_motif.c
2433         $(CCC) -o $@ gui_motif.c
2434
2435 objects/gui_xmdlg.o: gui_xmdlg.c
2436         $(CCC) -o $@ gui_xmdlg.c
2437
2438 objects/gui_xmebw.o: gui_xmebw.c
2439         $(CCC) -o $@ gui_xmebw.c
2440
2441 objects/gui_x11.o: gui_x11.c
2442         $(CCC) -o $@ gui_x11.c
2443
2444 objects/gui_photon.o: gui_photon.c
2445         $(CCC) -o $@ gui_photon.c
2446
2447 objects/gui_mac.o: gui_mac.c
2448         $(CCC) -o $@ gui_mac.c
2449
2450 objects/gui_macvim.o: MacVim/gui_macvim.m
2451         $(CCC) -fobjc-exceptions -o $@ MacVim/gui_macvim.m
2452
2453 objects/hangulin.o: hangulin.c
2454         $(CCC) -o $@ hangulin.c
2455
2456 objects/if_cscope.o: if_cscope.c
2457         $(CCC) -o $@ if_cscope.c
2458
2459 objects/if_xcmdsrv.o: if_xcmdsrv.c
2460         $(CCC) -o $@ if_xcmdsrv.c
2461
2462 objects/if_mzsch.o: if_mzsch.c $(MZSCHEME_EXTRA)
2463         $(CCC) -o $@ $(MZSCHEME_CFLAGS_EXTRA) if_mzsch.c
2464
2465 mzscheme_base.c:
2466         $(MZSCHEME_MZC) --c-mods mzscheme_base.c ++lib scheme/base
2467
2468 objects/if_perl.o: auto/if_perl.c
2469         $(CCC) -o $@ auto/if_perl.c
2470
2471 objects/if_perlsfio.o: if_perlsfio.c
2472         $(CCC) -o $@ if_perlsfio.c
2473
2474 objects/if_python.o: if_python.c
2475         $(CCC) -o $@ $(PYTHON_CFLAGS_EXTRA) if_python.c
2476
2477 objects/if_ruby.o: if_ruby.c
2478         $(CCC) -o $@ if_ruby.c
2479
2480 objects/if_sniff.o: if_sniff.c
2481         $(CCC) -o $@ if_sniff.c
2482
2483 objects/if_tcl.o: if_tcl.c
2484         $(CCC) -o $@ if_tcl.c
2485
2486 objects/integration.o: integration.c
2487         $(CCC) -o $@ integration.c
2488
2489 objects/main.o: main.c
2490         $(CCC) -o $@ main.c
2491
2492 objects/mark.o: mark.c
2493         $(CCC) -o $@ mark.c
2494
2495 objects/memfile.o: memfile.c
2496         $(CCC) -o $@ memfile.c
2497
2498 objects/memline.o: memline.c
2499         $(CCC) -o $@ memline.c
2500
2501 objects/menu.o: menu.c
2502         $(CCC) -o $@ menu.c
2503
2504 objects/message.o: message.c
2505         $(CCC) -o $@ message.c
2506
2507 objects/misc1.o: misc1.c
2508         $(CCC) -o $@ misc1.c
2509
2510 objects/misc2.o: misc2.c
2511         $(CCC) -o $@ misc2.c
2512
2513 objects/move.o: move.c
2514         $(CCC) -o $@ move.c
2515
2516 objects/mbyte.o: mbyte.c
2517         $(CCC) -o $@ mbyte.c
2518
2519 objects/normal.o: normal.c
2520         $(CCC) -o $@ normal.c
2521
2522 objects/ops.o: ops.c
2523         $(CCC) -o $@ ops.c
2524
2525 objects/option.o: option.c
2526         $(CCC) -o $@ option.c
2527
2528 objects/os_beos.o: os_beos.c
2529         $(CCC) -o $@ os_beos.c
2530
2531 objects/os_qnx.o: os_qnx.c
2532         $(CCC) -o $@ os_qnx.c
2533
2534 objects/os_macosx.o: os_macosx.c
2535         $(CCC) -o $@ os_macosx.c
2536
2537 objects/os_mac_conv.o: os_mac_conv.c
2538         $(CCC) -o $@ os_mac_conv.c
2539
2540 objects/os_unix.o: os_unix.c
2541         $(CCC) -o $@ os_unix.c
2542
2543 objects/pathdef.o: auto/pathdef.c
2544         $(CCC) -o $@ auto/pathdef.c
2545
2546 objects/py_config.o: $(PYTHON_CONFDIR)/config.c
2547         $(CCC) -o $@ $(PYTHON_CONFDIR)/config.c \
2548                 -I$(PYTHON_CONFDIR) -DHAVE_CONFIG_H -DNO_MAIN
2549
2550 objects/py_getpath.o: $(PYTHON_CONFDIR)/getpath.c
2551         $(CCC) -o $@ $(PYTHON_CONFDIR)/getpath.c \
2552                 -I$(PYTHON_CONFDIR) -DHAVE_CONFIG_H -DNO_MAIN \
2553                 $(PYTHON_GETPATH_CFLAGS)
2554
2555 objects/pty.o: pty.c
2556         $(CCC) -o $@ pty.c
2557
2558 objects/popupmnu.o: popupmnu.c
2559         $(CCC) -o $@ popupmnu.c
2560
2561 objects/quickfix.o: quickfix.c
2562         $(CCC) -o $@ quickfix.c
2563
2564 objects/regexp.o: regexp.c
2565         $(CCC) -o $@ regexp.c
2566
2567 objects/screen.o: screen.c
2568         $(CCC) -o $@ screen.c
2569
2570 objects/search.o: search.c
2571         $(CCC) -o $@ search.c
2572
2573 objects/spell.o: spell.c
2574         $(CCC) -o $@ spell.c
2575
2576 objects/syntax.o: syntax.c
2577         $(CCC) -o $@ syntax.c
2578
2579 objects/tag.o: tag.c
2580         $(CCC) -o $@ tag.c
2581
2582 objects/term.o: term.c
2583         $(CCC) -o $@ term.c
2584
2585 objects/ui.o: ui.c
2586         $(CCC) -o $@ ui.c
2587
2588 objects/undo.o: undo.c
2589         $(CCC) -o $@ undo.c
2590
2591 objects/window.o: window.c
2592         $(CCC) -o $@ window.c
2593
2594 objects/workshop.o: workshop.c
2595         $(CCC) -o $@ workshop.c
2596
2597 objects/wsdebug.o: wsdebug.c
2598         $(CCC) -o $@ wsdebug.c
2599
2600 objects/netbeans.o: netbeans.c
2601         $(CCC) -o $@ netbeans.c
2602
2603 Makefile:
2604         @echo The name of the makefile MUST be "Makefile" (with capital M)!!!!
2605
2606 ###############################################################################
2607 ### MacOS X installation
2608 ###
2609 ### This installs a runnable Vim.app in $(prefix)
2610
2611 REZ    = /Developer/Tools/Rez
2612 RESDIR = $(APPDIR)/Contents/Resources
2613 VERSION = $(VIMMAJOR).$(VIMMINOR)
2614
2615 ### Common flags
2616 M4FLAGSX = $(M4FLAGS) -DAPP_EXE=$(VIMNAME) -DAPP_NAME=$(VIMNAME) \
2617                 -DAPP_VER=$(VERSION)
2618
2619 install_macosx: gui_bundle
2620 # Remove the link to the runtime dir, don't want to copy all of that.
2621         -rm $(RESDIR)/vim/runtime
2622         $(INSTALL_DATA_R) $(APPDIR) $(DESTDIR)$(prefix)
2623 # Generate the help tags file now, it won't work with "make installruntime".
2624         -@srcdir=`pwd`; cd $(HELPSOURCE); $(MAKE) VIMEXE=$$srcdir/$(VIMTARGET) vimtags
2625 # Install the runtime files.  Recursive!
2626         -mkdir -p $(DESTDIR)$(prefix)/$(RESDIR)/vim/runtime
2627 #       -mkdir $(DESTDIR)$(prefix)/$(APPDIR)/bin
2628         srcdir=`pwd`; $(MAKE) -f Makefile installruntime \
2629                 VIMEXE=$$srcdir/$(VIMTARGET) \
2630                 prefix=$(DESTDIR)$(prefix)/$(RESDIR)$(VIMDIR) \
2631                 exec_prefix=$(DESTDIR)$(prefix)/$(APPDIR)/Contents \
2632                 BINDIR=$(DESTDIR)$(prefix)/$(APPDIR)/Contents/MacOS \
2633                 VIMLOC=$(DESTDIR)$(prefix)/$(RESDIR)$(VIMDIR) \
2634                 VIMRTLOC=$(DESTDIR)$(prefix)/$(RESDIR)$(VIMDIR)/runtime
2635 # Put the link back.
2636         ln -s `pwd`/../runtime $(RESDIR)/vim
2637 # Copy rgb.txt, Mac doesn't always have X11
2638         $(INSTALL_DATA) $(SCRIPTSOURCE)/rgb.txt $(DESTDIR)$(prefix)/$(RESDIR)/vim/runtime
2639 # TODO: Create the vimtutor and/or gvimtutor application.
2640
2641 gui_bundle: $(RESDIR) bundle-dir bundle-executable bundle-info bundle-resource \
2642         bundle-language
2643
2644 $(RESDIR):
2645         mkdir -p $@
2646
2647 bundle-dir: $(APPDIR)/Contents $(VIMTARGET)
2648 # Make a link to the runtime directory, so that we can try out the executable
2649 # without installing it.
2650         mkdir -p $(RESDIR)/vim
2651         -ln -s `pwd`/../runtime $(RESDIR)/vim
2652
2653 bundle-executable: $(VIMTARGET)
2654         mkdir -p $(APPDIR)/Contents/MacOS
2655         cp $(VIMTARGET) $(APPDIR)/Contents/MacOS/$(VIMTARGET)
2656
2657 bundle-info:  bundle-dir
2658         @echo "Creating PkgInfo"
2659         @echo -n "APPLVIM!" > $(APPDIR)/Contents/PkgInfo
2660         @echo "Creating Info.plist"
2661         m4 $(M4FLAGSX) infplist.xml > $(APPDIR)/Contents/Info.plist
2662
2663 bundle-resource: bundle-dir bundle-rsrc
2664         cp -f $(RSRC_DIR)/*.icns $(RESDIR)
2665
2666 ### Classic resources
2667 # Resource fork (in the form of a .rsrc file) for Classic Vim (Mac OS 9)
2668 # This file is also required for OS X Vim.
2669 bundle-rsrc: os_mac.rsr.hqx
2670         @echo "Creating resource fork"
2671         python dehqx.py $<
2672         rm -f gui_mac.rsrc
2673         mv gui_mac.rsrc.rsrcfork $(RESDIR)/$(VIMNAME).rsrc
2674
2675 # po/Make_osx.pl says something about generating a Mac message file
2676 # for Ukrananian.  Would somebody using Mac OS X in Ukranian
2677 # *really* be upset that Carbon Vim was not localised in
2678 # Ukranian?
2679 #
2680 #bundle-language: bundle-dir po/Make_osx.pl
2681 #       cd po && perl Make_osx.pl --outdir ../$(RESDIR) $(MULTILANG)
2682 bundle-language: bundle-dir
2683
2684 $(APPDIR)/Contents:
2685         -$(SHELL) ./mkinstalldirs $(APPDIR)/Contents/MacOS
2686         -$(SHELL) ./mkinstalldirs $(RESDIR)/English.lproj
2687
2688
2689 ##############################################################################
2690 ### MacVim GUI
2691 .PHONY: macvim macvimclean
2692 macvim: $(VIMTARGET)
2693         xcodebuild -project MacVim/MacVim.xcodeproj $(XCODEFLAGS)
2694
2695 macvimclean:
2696         if test -d MacVim; then \
2697                 xcodebuild -project MacVim/MacVim.xcodeproj clean; \
2698         fi
2699
2700
2701 ###############################################################################
2702 ### (automatically generated by 'make depend')
2703 ### Dependencies:
2704 objects/buffer.o: buffer.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2705   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2706   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2707   arabic.h version.h
2708 objects/charset.o: charset.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2709   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2710   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2711   arabic.h
2712 objects/diff.o: diff.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2713   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2714   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2715   arabic.h
2716 objects/digraph.o: digraph.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2717   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2718   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2719   arabic.h
2720 objects/edit.o: edit.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2721   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2722   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2723   arabic.h
2724 objects/eval.o: eval.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2725   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2726   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2727   arabic.h version.h
2728 objects/ex_cmds.o: ex_cmds.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2729   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2730   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2731   arabic.h version.h
2732 objects/ex_cmds2.o: ex_cmds2.c vim.h auto/config.h feature.h os_unix.h \
2733   auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2734   regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
2735   globals.h farsi.h arabic.h version.h
2736 objects/ex_docmd.o: ex_docmd.c vim.h auto/config.h feature.h os_unix.h \
2737   auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2738   regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
2739   globals.h farsi.h arabic.h
2740 objects/ex_eval.o: ex_eval.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2741   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2742   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2743   arabic.h
2744 objects/ex_getln.o: ex_getln.c vim.h auto/config.h feature.h os_unix.h \
2745   auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2746   regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
2747   globals.h farsi.h arabic.h
2748 objects/fileio.o: fileio.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2749   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2750   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2751   arabic.h
2752 objects/fold.o: fold.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2753   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2754   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2755   arabic.h
2756 objects/getchar.o: getchar.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2757   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2758   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2759   arabic.h
2760 objects/hardcopy.o: hardcopy.c vim.h auto/config.h feature.h os_unix.h \
2761   auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2762   regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
2763   globals.h farsi.h arabic.h version.h
2764 objects/hashtab.o: hashtab.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2765   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2766   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2767   arabic.h
2768 objects/if_cscope.o: if_cscope.c vim.h auto/config.h feature.h os_unix.h \
2769   auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2770   regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
2771   globals.h farsi.h arabic.h if_cscope.h
2772 objects/if_xcmdsrv.o: if_xcmdsrv.c vim.h auto/config.h feature.h os_unix.h \
2773   auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2774   regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
2775   globals.h farsi.h arabic.h version.h
2776 objects/main.o: main.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2777   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2778   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2779   arabic.h farsi.c arabic.c
2780 objects/mark.o: mark.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2781   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2782   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2783   arabic.h
2784 objects/memfile.o: memfile.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2785   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2786   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2787   arabic.h
2788 objects/memline.o: memline.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2789   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2790   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2791   arabic.h
2792 objects/menu.o: menu.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2793   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2794   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2795   arabic.h
2796 objects/message.o: message.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2797   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2798   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2799   arabic.h
2800 objects/misc1.o: misc1.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2801   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2802   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2803   arabic.h version.h
2804 objects/misc2.o: misc2.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2805   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2806   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2807   arabic.h
2808 objects/move.o: move.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2809   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2810   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2811   arabic.h
2812 objects/mbyte.o: mbyte.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2813   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2814   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2815   arabic.h
2816 objects/normal.o: normal.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2817   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2818   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2819   arabic.h
2820 objects/ops.o: ops.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h ascii.h \
2821   keymap.h term.h macros.h option.h structs.h regexp.h gui.h gui_beval.h \
2822   proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h arabic.h
2823 objects/option.o: option.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2824   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2825   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2826   arabic.h
2827 objects/os_unix.o: os_unix.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2828   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2829   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2830   arabic.h os_unixx.h
2831 objects/pathdef.o: auto/pathdef.c ./vim.h ./auto/config.h ./feature.h ./os_unix.h \
2832   ./auto/osdef.h ./ascii.h ./keymap.h ./term.h ./macros.h ./option.h \
2833   ./structs.h ./regexp.h ./gui.h ./gui_beval.h proto/gui_beval.pro \
2834   ./ex_cmds.h ./proto.h ./globals.h ./farsi.h ./arabic.h
2835 objects/popupmnu.o: popupmnu.c vim.h auto/config.h feature.h os_unix.h \
2836   auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2837   regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
2838   globals.h farsi.h arabic.h
2839 objects/quickfix.o: quickfix.c vim.h auto/config.h feature.h os_unix.h \
2840   auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2841   regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
2842   globals.h farsi.h arabic.h
2843 objects/regexp.o: regexp.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2844   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2845   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2846   arabic.h
2847 objects/screen.o: screen.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2848   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2849   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2850   arabic.h
2851 objects/search.o: search.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2852   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2853   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2854   arabic.h
2855 objects/spell.o: spell.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2856   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2857   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2858   arabic.h
2859 objects/syntax.o: syntax.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2860   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2861   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2862   arabic.h
2863 objects/tag.o: tag.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h ascii.h \
2864   keymap.h term.h macros.h option.h structs.h regexp.h gui.h gui_beval.h \
2865   proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h arabic.h
2866 objects/term.o: term.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2867   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2868   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2869   arabic.h
2870 objects/ui.o: ui.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h ascii.h \
2871   keymap.h term.h macros.h option.h structs.h regexp.h gui.h gui_beval.h \
2872   proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h arabic.h
2873 objects/undo.o: undo.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2874   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2875   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2876   arabic.h
2877 objects/version.o: version.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2878   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2879   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2880   arabic.h version.h
2881 objects/window.o: window.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2882   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2883   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2884   arabic.h
2885 objects/gui.o: gui.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h ascii.h \
2886   keymap.h term.h macros.h option.h structs.h regexp.h gui.h gui_beval.h \
2887   proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h arabic.h
2888 objects/gui_gtk.o: gui_gtk.c gui_gtk_f.h vim.h auto/config.h feature.h os_unix.h \
2889   auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2890   regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
2891   globals.h farsi.h arabic.h ../pixmaps/stock_icons.h
2892 objects/gui_gtk_f.o: gui_gtk_f.c vim.h auto/config.h feature.h os_unix.h \
2893   auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2894   regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
2895   globals.h farsi.h arabic.h gui_gtk_f.h
2896 objects/gui_motif.o: gui_motif.c vim.h auto/config.h feature.h os_unix.h \
2897   auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2898   regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
2899   globals.h farsi.h arabic.h gui_xmebw.h ../pixmaps/alert.xpm \
2900   ../pixmaps/error.xpm ../pixmaps/generic.xpm ../pixmaps/info.xpm \
2901   ../pixmaps/quest.xpm gui_x11_pm.h ../pixmaps/tb_new.xpm \
2902   ../pixmaps/tb_open.xpm ../pixmaps/tb_close.xpm ../pixmaps/tb_save.xpm \
2903   ../pixmaps/tb_print.xpm ../pixmaps/tb_cut.xpm ../pixmaps/tb_copy.xpm \
2904   ../pixmaps/tb_paste.xpm ../pixmaps/tb_find.xpm \
2905   ../pixmaps/tb_find_next.xpm ../pixmaps/tb_find_prev.xpm \
2906   ../pixmaps/tb_find_help.xpm ../pixmaps/tb_exit.xpm \
2907   ../pixmaps/tb_undo.xpm ../pixmaps/tb_redo.xpm ../pixmaps/tb_help.xpm \
2908   ../pixmaps/tb_macro.xpm ../pixmaps/tb_make.xpm \
2909   ../pixmaps/tb_save_all.xpm ../pixmaps/tb_jump.xpm \
2910   ../pixmaps/tb_ctags.xpm ../pixmaps/tb_load_session.xpm \
2911   ../pixmaps/tb_save_session.xpm ../pixmaps/tb_new_session.xpm \
2912   ../pixmaps/tb_blank.xpm ../pixmaps/tb_maximize.xpm \
2913   ../pixmaps/tb_split.xpm ../pixmaps/tb_minimize.xpm \
2914   ../pixmaps/tb_shell.xpm ../pixmaps/tb_replace.xpm \
2915   ../pixmaps/tb_vsplit.xpm ../pixmaps/tb_maxwidth.xpm \
2916   ../pixmaps/tb_minwidth.xpm
2917 objects/gui_xmdlg.o: gui_xmdlg.c vim.h auto/config.h feature.h os_unix.h \
2918   auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2919   regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
2920   globals.h farsi.h arabic.h
2921 objects/gui_xmebw.o: gui_xmebw.c vim.h auto/config.h feature.h os_unix.h \
2922   auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2923   regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
2924   globals.h farsi.h arabic.h gui_xmebwp.h gui_xmebw.h
2925 objects/gui_athena.o: gui_athena.c vim.h auto/config.h feature.h os_unix.h \
2926   auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2927   regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
2928   globals.h farsi.h arabic.h gui_at_sb.h gui_x11_pm.h \
2929   ../pixmaps/tb_new.xpm ../pixmaps/tb_open.xpm ../pixmaps/tb_close.xpm \
2930   ../pixmaps/tb_save.xpm ../pixmaps/tb_print.xpm ../pixmaps/tb_cut.xpm \
2931   ../pixmaps/tb_copy.xpm ../pixmaps/tb_paste.xpm ../pixmaps/tb_find.xpm \
2932   ../pixmaps/tb_find_next.xpm ../pixmaps/tb_find_prev.xpm \
2933   ../pixmaps/tb_find_help.xpm ../pixmaps/tb_exit.xpm \
2934   ../pixmaps/tb_undo.xpm ../pixmaps/tb_redo.xpm ../pixmaps/tb_help.xpm \
2935   ../pixmaps/tb_macro.xpm ../pixmaps/tb_make.xpm \
2936   ../pixmaps/tb_save_all.xpm ../pixmaps/tb_jump.xpm \
2937   ../pixmaps/tb_ctags.xpm ../pixmaps/tb_load_session.xpm \
2938   ../pixmaps/tb_save_session.xpm ../pixmaps/tb_new_session.xpm \
2939   ../pixmaps/tb_blank.xpm ../pixmaps/tb_maximize.xpm \
2940   ../pixmaps/tb_split.xpm ../pixmaps/tb_minimize.xpm \
2941   ../pixmaps/tb_shell.xpm ../pixmaps/tb_replace.xpm \
2942   ../pixmaps/tb_vsplit.xpm ../pixmaps/tb_maxwidth.xpm \
2943   ../pixmaps/tb_minwidth.xpm
2944 objects/gui_gtk_x11.o: gui_gtk_x11.c vim.h auto/config.h feature.h os_unix.h \
2945   auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2946   regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
2947   globals.h farsi.h arabic.h gui_gtk_f.h ../runtime/vim32x32.xpm \
2948   ../runtime/vim16x16.xpm ../runtime/vim48x48.xpm
2949 objects/gui_x11.o: gui_x11.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2950   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2951   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2952   arabic.h ../runtime/vim32x32.xpm ../runtime/vim16x16.xpm \
2953   ../runtime/vim48x48.xpm
2954 objects/gui_at_sb.o: gui_at_sb.c vim.h auto/config.h feature.h os_unix.h \
2955   auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2956   regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
2957   globals.h farsi.h arabic.h gui_at_sb.h
2958 objects/gui_at_fs.o: gui_at_fs.c vim.h auto/config.h feature.h os_unix.h \
2959   auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2960   regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
2961   globals.h farsi.h arabic.h gui_at_sb.h
2962 objects/pty.o: pty.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h ascii.h \
2963   keymap.h term.h macros.h option.h structs.h regexp.h gui.h gui_beval.h \
2964   proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h arabic.h
2965 objects/hangulin.o: hangulin.c vim.h auto/config.h feature.h os_unix.h \
2966   auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2967   regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
2968   globals.h farsi.h arabic.h
2969 objects/if_mzsch.o: if_mzsch.c vim.h auto/config.h feature.h os_unix.h \
2970   auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2971   regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
2972   globals.h farsi.h arabic.h if_mzsch.h
2973 objects/if_perl.o: auto/if_perl.c ./vim.h ./auto/config.h ./feature.h ./os_unix.h \
2974   ./auto/osdef.h ./ascii.h ./keymap.h ./term.h ./macros.h ./option.h \
2975   ./structs.h ./regexp.h ./gui.h ./gui_beval.h proto/gui_beval.pro \
2976   ./ex_cmds.h ./proto.h ./globals.h ./farsi.h ./arabic.h
2977 objects/if_perlsfio.o: if_perlsfio.c vim.h auto/config.h feature.h os_unix.h \
2978   auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2979   regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
2980   globals.h farsi.h arabic.h
2981 objects/if_python.o: if_python.c vim.h auto/config.h feature.h os_unix.h \
2982   auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2983   regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
2984   globals.h farsi.h arabic.h
2985 objects/if_tcl.o: if_tcl.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2986   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2987   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2988   arabic.h
2989 objects/if_ruby.o: if_ruby.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \
2990   ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \
2991   gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \
2992   arabic.h version.h
2993 objects/if_sniff.o: if_sniff.c vim.h auto/config.h feature.h os_unix.h \
2994   auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2995   regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
2996   globals.h farsi.h arabic.h os_unixx.h
2997 objects/gui_beval.o: gui_beval.c vim.h auto/config.h feature.h os_unix.h \
2998   auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
2999   regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
3000   globals.h farsi.h arabic.h
3001 objects/workshop.o: workshop.c auto/config.h integration.h vim.h feature.h \
3002   os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h \
3003   structs.h regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h \
3004   proto.h globals.h farsi.h arabic.h version.h workshop.h
3005 objects/wsdebug.o: wsdebug.c
3006 objects/integration.o: integration.c vim.h auto/config.h feature.h os_unix.h \
3007   auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
3008   regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
3009   globals.h farsi.h arabic.h integration.h
3010 objects/netbeans.o: netbeans.c vim.h auto/config.h feature.h os_unix.h \
3011   auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \
3012   regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \
3013   globals.h farsi.h arabic.h version.h